From 2bfba3c444fe8b2ab1c38112a89d8f03b61136ca Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 21 Oct 2008 20:57:23 +0200 Subject: ide: remove useless subdirs from drivers/ide/ Suggested-by: Ralf Baechle Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/alim15x3.c | 602 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 602 insertions(+) create mode 100644 drivers/ide/alim15x3.c (limited to 'drivers/ide/alim15x3.c') diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c new file mode 100644 index 000000000000..daf9dce39e52 --- /dev/null +++ b/drivers/ide/alim15x3.c @@ -0,0 +1,602 @@ +/* + * Copyright (C) 1998-2000 Michel Aubry, Maintainer + * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer + * Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer + * + * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org) + * May be copied or modified under the terms of the GNU General Public License + * Copyright (C) 2002 Alan Cox + * ALi (now ULi M5228) support by Clear Zhang + * Copyright (C) 2007 MontaVista Software, Inc. + * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * + * (U)DMA capable version of ali 1533/1543(C), 1535(D) + * + ********************************************************************** + * 9/7/99 --Parts from the above author are included and need to be + * converted into standard interface, once I finish the thought. + * + * Recent changes + * Don't use LBA48 mode on ALi <= 0xC4 + * Don't poke 0x79 with a non ALi northbridge + * Don't flip undefined bits on newer chipsets (fix Fujitsu laptop hang) + * Allow UDMA6 on revisions > 0xC4 + * + * Documentation + * Chipset documentation available under NDA only + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DRV_NAME "alim15x3" + +/* + * Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking + * (this is DANGEROUS and could result in data corruption). + */ +static int wdc_udma; + +module_param(wdc_udma, bool, 0); +MODULE_PARM_DESC(wdc_udma, + "allow UDMA on M1543C-E chipset for WDC disks (DANGEROUS)"); + +/* + * ALi devices are not plug in. Otherwise these static values would + * need to go. They ought to go away anyway + */ + +static u8 m5229_revision; +static u8 chip_is_1543c_e; +static struct pci_dev *isa_dev; + +/** + * ali_set_pio_mode - set host controller for PIO mode + * @drive: drive + * @pio: PIO mode number + * + * Program the controller for the given PIO mode. + */ + +static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = to_pci_dev(hwif->dev); + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); + int s_time = t->setup, a_time = t->active, c_time = t->cycle; + u8 s_clc, a_clc, r_clc; + unsigned long flags; + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; + int port = hwif->channel ? 0x5c : 0x58; + int portFIFO = hwif->channel ? 0x55 : 0x54; + u8 cd_dma_fifo = 0, unit = drive->dn & 1; + + if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8) + s_clc = 0; + if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8) + a_clc = 0; + + if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) { + r_clc = 1; + } else { + if (r_clc >= 16) + r_clc = 0; + } + local_irq_save(flags); + + /* + * PIO mode => ATA FIFO on, ATAPI FIFO off + */ + pci_read_config_byte(dev, portFIFO, &cd_dma_fifo); + if (drive->media==ide_disk) { + if (unit) { + pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50); + } else { + pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05); + } + } else { + if (unit) { + pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F); + } else { + pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0); + } + } + + pci_write_config_byte(dev, port, s_clc); + pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc); + local_irq_restore(flags); +} + +/** + * ali_udma_filter - compute UDMA mask + * @drive: IDE device + * + * Return available UDMA modes. + * + * The actual rules for the ALi are: + * No UDMA on revisions <= 0x20 + * Disk only for revisions < 0xC2 + * Not WDC drives on M1543C-E (?) + */ + +static u8 ali_udma_filter(ide_drive_t *drive) +{ + if (m5229_revision > 0x20 && m5229_revision < 0xC2) { + if (drive->media != ide_disk) + return 0; + if (wdc_udma == 0 && chip_is_1543c_e && + strstr((char *)&drive->id[ATA_ID_PROD], "WDC ")) + return 0; + } + + return drive->hwif->ultra_mask; +} + +/** + * ali_set_dma_mode - set host controller for DMA mode + * @drive: drive + * @speed: DMA mode + * + * Configure the hardware for the desired IDE transfer mode. + */ + +static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed) +{ + ide_hwif_t *hwif = HWIF(drive); + struct pci_dev *dev = to_pci_dev(hwif->dev); + u8 speed1 = speed; + u8 unit = drive->dn & 1; + u8 tmpbyte = 0x00; + int m5229_udma = (hwif->channel) ? 0x57 : 0x56; + + if (speed == XFER_UDMA_6) + speed1 = 0x47; + + if (speed < XFER_UDMA_0) { + u8 ultra_enable = (unit) ? 0x7f : 0xf7; + /* + * clear "ultra enable" bit + */ + pci_read_config_byte(dev, m5229_udma, &tmpbyte); + tmpbyte &= ultra_enable; + pci_write_config_byte(dev, m5229_udma, tmpbyte); + + /* + * FIXME: Oh, my... DMA timings are never set. + */ + } else { + pci_read_config_byte(dev, m5229_udma, &tmpbyte); + tmpbyte &= (0x0f << ((1-unit) << 2)); + /* + * enable ultra dma and set timing + */ + tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2)); + pci_write_config_byte(dev, m5229_udma, tmpbyte); + if (speed >= XFER_UDMA_3) { + pci_read_config_byte(dev, 0x4b, &tmpbyte); + tmpbyte |= 1; + pci_write_config_byte(dev, 0x4b, tmpbyte); + } + } +} + +/** + * ali15x3_dma_setup - begin a DMA phase + * @drive: target device + * + * Returns 1 if the DMA cannot be performed, zero on success. + */ + +static int ali15x3_dma_setup(ide_drive_t *drive) +{ + if (m5229_revision < 0xC2 && drive->media != ide_disk) { + if (rq_data_dir(drive->hwif->hwgroup->rq)) + return 1; /* try PIO instead of DMA */ + } + return ide_dma_setup(drive); +} + +/** + * init_chipset_ali15x3 - Initialise an ALi IDE controller + * @dev: PCI device + * + * This function initializes the ALI IDE controller and where + * appropriate also sets up the 1533 southbridge. + */ + +static unsigned int init_chipset_ali15x3(struct pci_dev *dev) +{ + unsigned long flags; + u8 tmpbyte; + struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0)); + + m5229_revision = dev->revision; + + isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); + + local_irq_save(flags); + + if (m5229_revision < 0xC2) { + /* + * revision 0x20 (1543-E, 1543-F) + * revision 0xC0, 0xC1 (1543C-C, 1543C-D, 1543C-E) + * clear CD-ROM DMA write bit, m5229, 0x4b, bit 7 + */ + pci_read_config_byte(dev, 0x4b, &tmpbyte); + /* + * clear bit 7 + */ + pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F); + /* + * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010 + */ + if (m5229_revision >= 0x20 && isa_dev) { + pci_read_config_byte(isa_dev, 0x5e, &tmpbyte); + chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0; + } + goto out; + } + + /* + * 1543C-B?, 1535, 1535D, 1553 + * Note 1: not all "motherboard" support this detection + * Note 2: if no udma 66 device, the detection may "error". + * but in this case, we will not set the device to + * ultra 66, the detection result is not important + */ + + /* + * enable "Cable Detection", m5229, 0x4b, bit3 + */ + pci_read_config_byte(dev, 0x4b, &tmpbyte); + pci_write_config_byte(dev, 0x4b, tmpbyte | 0x08); + + /* + * We should only tune the 1533 enable if we are using an ALi + * North bridge. We might have no north found on some zany + * box without a device at 0:0.0. The ALi bridge will be at + * 0:0.0 so if we didn't find one we know what is cooking. + */ + if (north && north->vendor != PCI_VENDOR_ID_AL) + goto out; + + if (m5229_revision < 0xC5 && isa_dev) + { + /* + * set south-bridge's enable bit, m1533, 0x79 + */ + + pci_read_config_byte(isa_dev, 0x79, &tmpbyte); + if (m5229_revision == 0xC2) { + /* + * 1543C-B0 (m1533, 0x79, bit 2) + */ + pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x04); + } else if (m5229_revision >= 0xC3) { + /* + * 1553/1535 (m1533, 0x79, bit 1) + */ + pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02); + } + } + +out: + /* + * CD_ROM DMA on (m5229, 0x53, bit0) + * Enable this bit even if we want to use PIO. + * PIO FIFO off (m5229, 0x53, bit1) + * The hardware will use 0x54h and 0x55h to control PIO FIFO. + * (Not on later devices it seems) + * + * 0x53 changes meaning on later revs - we must no touch + * bit 1 on them. Need to check if 0x20 is the right break. + */ + if (m5229_revision >= 0x20) { + pci_read_config_byte(dev, 0x53, &tmpbyte); + + if (m5229_revision <= 0x20) + tmpbyte = (tmpbyte & (~0x02)) | 0x01; + else if (m5229_revision == 0xc7 || m5229_revision == 0xc8) + tmpbyte |= 0x03; + else + tmpbyte |= 0x01; + + pci_write_config_byte(dev, 0x53, tmpbyte); + } + pci_dev_put(north); + pci_dev_put(isa_dev); + local_irq_restore(flags); + return 0; +} + +/* + * Cable special cases + */ + +static const struct dmi_system_id cable_dmi_table[] = { + { + .ident = "HP Pavilion N5430", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"), + }, + }, + { + .ident = "Toshiba Satellite S1800-814", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"), + }, + }, + { } +}; + +static int ali_cable_override(struct pci_dev *pdev) +{ + /* Fujitsu P2000 */ + if (pdev->subsystem_vendor == 0x10CF && + pdev->subsystem_device == 0x10AF) + return 1; + + /* Mitac 8317 (Winbook-A) and relatives */ + if (pdev->subsystem_vendor == 0x1071 && + pdev->subsystem_device == 0x8317) + return 1; + + /* Systems by DMI */ + if (dmi_check_system(cable_dmi_table)) + return 1; + + return 0; +} + +/** + * ali_cable_detect - cable detection + * @hwif: IDE interface + * + * This checks if the controller and the cable are capable + * of UDMA66 transfers. It doesn't check the drives. + * But see note 2 below! + * + * FIXME: frobs bits that are not defined on newer ALi devicea + */ + +static u8 ali_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long flags; + u8 cbl = ATA_CBL_PATA40, tmpbyte; + + local_irq_save(flags); + + if (m5229_revision >= 0xC2) { + /* + * m5229 80-pin cable detection (from Host View) + * + * 0x4a bit0 is 0 => primary channel has 80-pin + * 0x4a bit1 is 0 => secondary channel has 80-pin + * + * Certain laptops use short but suitable cables + * and don't implement the detect logic. + */ + if (ali_cable_override(dev)) + cbl = ATA_CBL_PATA40_SHORT; + else { + pci_read_config_byte(dev, 0x4a, &tmpbyte); + if ((tmpbyte & (1 << hwif->channel)) == 0) + cbl = ATA_CBL_PATA80; + } + } + + local_irq_restore(flags); + + return cbl; +} + +#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) +/** + * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff + * @hwif: interface to configure + * + * Obtain the IRQ tables for an ALi based IDE solution on the PC + * class platforms. This part of the code isn't applicable to the + * Sparc and PowerPC systems. + */ + +static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + u8 ideic, inmir; + s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6, + 1, 11, 0, 12, 0, 14, 0, 15 }; + int irq = -1; + + if (dev->device == PCI_DEVICE_ID_AL_M5229) + hwif->irq = hwif->channel ? 15 : 14; + + if (isa_dev) { + /* + * read IDE interface control + */ + pci_read_config_byte(isa_dev, 0x58, &ideic); + + /* bit0, bit1 */ + ideic = ideic & 0x03; + + /* get IRQ for IDE Controller */ + if ((hwif->channel && ideic == 0x03) || + (!hwif->channel && !ideic)) { + /* + * get SIRQ1 routing table + */ + pci_read_config_byte(isa_dev, 0x44, &inmir); + inmir = inmir & 0x0f; + irq = irq_routing_table[inmir]; + } else if (hwif->channel && !(ideic & 0x01)) { + /* + * get SIRQ2 routing table + */ + pci_read_config_byte(isa_dev, 0x75, &inmir); + inmir = inmir & 0x0f; + irq = irq_routing_table[inmir]; + } + if(irq >= 0) + hwif->irq = irq; + } +} +#else +#define init_hwif_ali15x3 NULL +#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */ + +/** + * init_dma_ali15x3 - set up DMA on ALi15x3 + * @hwif: IDE interface + * @d: IDE port info + * + * Set up the DMA functionality on the ALi 15x3. + */ + +static int __devinit init_dma_ali15x3(ide_hwif_t *hwif, + const struct ide_port_info *d) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long base = ide_pci_dma_base(hwif, d); + + if (base == 0) + return -1; + + hwif->dma_base = base; + + if (ide_pci_check_simplex(hwif, d) < 0) + return -1; + + if (ide_pci_set_master(dev, d->name) < 0) + return -1; + + if (!hwif->channel) + outb(inb(base + 2) & 0x60, base + 2); + + printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", + hwif->name, base, base + 7); + + if (ide_allocate_dma_engine(hwif)) + return -1; + + hwif->dma_ops = &sff_dma_ops; + + return 0; +} + +static const struct ide_port_ops ali_port_ops = { + .set_pio_mode = ali_set_pio_mode, + .set_dma_mode = ali_set_dma_mode, + .udma_filter = ali_udma_filter, + .cable_detect = ali_cable_detect, +}; + +static const struct ide_dma_ops ali_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ali15x3_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = ide_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + +static const struct ide_port_info ali15x3_chipset __devinitdata = { + .name = DRV_NAME, + .init_chipset = init_chipset_ali15x3, + .init_hwif = init_hwif_ali15x3, + .init_dma = init_dma_ali15x3, + .port_ops = &ali_port_ops, + .pio_mask = ATA_PIO5, + .swdma_mask = ATA_SWDMA2, + .mwdma_mask = ATA_MWDMA2, +}; + +/** + * alim15x3_init_one - set up an ALi15x3 IDE controller + * @dev: PCI device to set up + * + * Perform the actual set up for an ALi15x3 that has been found by the + * hot plug layer. + */ + +static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct ide_port_info d = ali15x3_chipset; + u8 rev = dev->revision, idx = id->driver_data; + + /* don't use LBA48 DMA on ALi devices before rev 0xC5 */ + if (rev <= 0xC4) + d.host_flags |= IDE_HFLAG_NO_LBA48_DMA; + + if (rev >= 0x20) { + if (rev == 0x20) + d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA; + + if (rev < 0xC2) + d.udma_mask = ATA_UDMA2; + else if (rev == 0xC2 || rev == 0xC3) + d.udma_mask = ATA_UDMA4; + else if (rev == 0xC4) + d.udma_mask = ATA_UDMA5; + else + d.udma_mask = ATA_UDMA6; + + d.dma_ops = &ali_dma_ops; + } else { + d.host_flags |= IDE_HFLAG_NO_DMA; + + d.mwdma_mask = d.swdma_mask = 0; + } + + if (idx == 0) + d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX; + + return ide_pci_init_one(dev, &d, NULL); +} + + +static const struct pci_device_id alim15x3_pci_tbl[] = { + { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), 0 }, + { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 1 }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl); + +static struct pci_driver alim15x3_pci_driver = { + .name = "ALI15x3_IDE", + .id_table = alim15x3_pci_tbl, + .probe = alim15x3_init_one, + .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, +}; + +static int __init ali15x3_ide_init(void) +{ + return ide_pci_register_driver(&alim15x3_pci_driver); +} + +static void __exit ali15x3_ide_exit(void) +{ + return pci_unregister_driver(&alim15x3_pci_driver); +} + +module_init(ali15x3_ide_init); +module_exit(ali15x3_ide_exit); + +MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox"); +MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3