From 967ea03cc345d86c8e134d7610e61a3012046407 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Date: Sun, 21 Jul 2019 23:05:39 +0200 Subject: leds: ktd2692: Fix a typo in the name of a constant There is a typo in KTD2962_MM_MIN_CURR_THRESHOLD_SCALE. 6 and 9 are switched in 2962. Define and use KTD2692_MM_MIN_CURR_THRESHOLD_SCALE instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Enrico Weigelt <info@metux.net> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> --- drivers/leds/leds-ktd2692.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/leds') diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c index f63918206bfb..670efee9b131 100644 --- a/drivers/leds/leds-ktd2692.c +++ b/drivers/leds/leds-ktd2692.c @@ -19,7 +19,7 @@ /* Value related the movie mode */ #define KTD2692_MOVIE_MODE_CURRENT_LEVELS 16 #define KTD2692_MM_TO_FL_RATIO(x) ((x) / 3) -#define KTD2962_MM_MIN_CURR_THRESHOLD_SCALE 8 +#define KTD2692_MM_MIN_CURR_THRESHOLD_SCALE 8 /* Value related the flash mode */ #define KTD2692_FLASH_MODE_TIMEOUT_LEVELS 8 @@ -250,7 +250,7 @@ static void ktd2692_setup(struct ktd2692_context *led) ktd2692_expresswire_reset(led); gpiod_direction_output(led->aux_gpio, KTD2692_LOW); - ktd2692_expresswire_write(led, (KTD2962_MM_MIN_CURR_THRESHOLD_SCALE - 1) + ktd2692_expresswire_write(led, (KTD2692_MM_MIN_CURR_THRESHOLD_SCALE - 1) | KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE); ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45) | KTD2692_REG_FLASH_CURRENT_BASE); -- cgit v1.2.3