From 8ff19bc437f8d42d8a03dafe2bb28c5b3fc1bff1 Mon Sep 17 00:00:00 2001
From: Josh Wu <josh.wu@atmel.com>
Date: Mon, 28 Jul 2014 04:25:17 -0300
Subject: [media] media: atmel-isi: add primary DT support
This patch add the DT support for Atmel ISI driver.
It use the same v4l2 DT interface that defined in video-interfaces.txt.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
---
drivers/media/platform/soc_camera/atmel-isi.c | 65 ++++++++++++++++++++++++++-
1 file changed, 63 insertions(+), 2 deletions(-)
(limited to 'drivers/media')
diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
index d32c53383565..3408b045b3f1 100644
--- a/drivers/media/platform/soc_camera/atmel-isi.c
+++ b/drivers/media/platform/soc_camera/atmel-isi.c
@@ -25,6 +25,7 @@
#include <media/atmel-isi.h>
#include <media/soc_camera.h>
#include <media/soc_mediabus.h>
+#include <media/v4l2-of.h>
#include <media/videobuf2-dma-contig.h>
#define MAX_BUFFER_NUM 32
@@ -33,6 +34,7 @@
#define VID_LIMIT_BYTES (16 * 1024 * 1024)
#define MIN_FRAME_RATE 15
#define FRAME_INTERVAL_MILLI_SEC (1000 / MIN_FRAME_RATE)
+#define ISI_DEFAULT_MCLK_FREQ 25000000
/* Frame buffer descriptor */
struct fbd {
@@ -876,6 +878,51 @@ static int atmel_isi_remove(struct platform_device *pdev)
return 0;
}
+static int atmel_isi_probe_dt(struct atmel_isi *isi,
+ struct platform_device *pdev)
+{
+ struct device_node *np= pdev->dev.of_node;
+ struct v4l2_of_endpoint ep;
+ int err;
+
+ /* Default settings for ISI */
+ isi->pdata.full_mode = 1;
+ isi->pdata.mck_hz = ISI_DEFAULT_MCLK_FREQ;
+ isi->pdata.frate = ISI_CFG1_FRATE_CAPTURE_ALL;
+
+ np = of_graph_get_next_endpoint(np, NULL);
+ if (!np) {
+ dev_err(&pdev->dev, "Could not find the endpoint\n");
+ return -EINVAL;
+ }
+
+ err = v4l2_of_parse_endpoint(np, &ep);
+ if (err) {
+ dev_err(&pdev->dev, "Could not parse the endpoint\n");
+ goto err_probe_dt;
+ }
+
+ switch (ep.bus.parallel.bus_width) {
+ case 8:
+ isi->pdata.data_width_flags = ISI_DATAWIDTH_8;
+ break;
+ case 10:
+ isi->pdata.data_width_flags =
+ ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10;
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported bus width: %d\n",
+ ep.bus.parallel.bus_width);
+ err = -EINVAL;
+ goto err_probe_dt;
+ }
+
+err_probe_dt:
+ of_node_put(np);
+
+ return err;
+}
+
static int atmel_isi_probe(struct platform_device *pdev)
{
unsigned int irq;
@@ -887,7 +934,7 @@ static int atmel_isi_probe(struct platform_device *pdev)
struct isi_platform_data *pdata;
pdata = dev->platform_data;
- if (!pdata || !pdata->data_width_flags) {
+ if ((!pdata || !pdata->data_width_flags) && !pdev->dev.of_node) {
dev_err(&pdev->dev,
"No config available for Atmel ISI\n");
return -EINVAL;
@@ -903,7 +950,14 @@ static int atmel_isi_probe(struct platform_device *pdev)
if (IS_ERR(isi->pclk))
return PTR_ERR(isi->pclk);
- memcpy(&isi->pdata, pdata, sizeof(isi->pdata));
+ if (pdata) {
+ memcpy(&isi->pdata, pdata, sizeof(isi->pdata));
+ } else {
+ ret = atmel_isi_probe_dt(isi, pdev);
+ if (ret)
+ return ret;
+ }
+
isi->active = NULL;
spin_lock_init(&isi->lock);
INIT_LIST_HEAD(&isi->video_buffer_list);
@@ -1005,11 +1059,18 @@ err_alloc_ctx:
return ret;
}
+static const struct of_device_id atmel_isi_of_match[] = {
+ { .compatible = "atmel,at91sam9g45-isi" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, atmel_isi_of_match);
+
static struct platform_driver atmel_isi_driver = {
.remove = atmel_isi_remove,
.driver = {
.name = "atmel_isi",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(atmel_isi_of_match),
},
};
--
cgit v1.2.3