From a502a8f04097e038c3daa16c5202a9538116d563 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Thu, 3 Mar 2022 08:54:15 +0100 Subject: net: phy: meson-gxl: fix interrupt handling in forced mode This PHY doesn't support a link-up interrupt source. If aneg is enabled we use the "aneg complete" interrupt for this purpose, but if aneg is disabled link-up isn't signaled currently. According to a vendor driver there's an additional "energy detect" interrupt source that can be used to signal link-up if aneg is disabled. We can safely ignore this interrupt source if aneg is enabled. This patch was tested on a TX3 Mini TV box with S905W (even though boot message says it's a S905D). This issue has been existing longer, but due to changes in phylib and the driver the patch applies only from the commit marked as fixed. Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()") Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/04cac530-ea1b-850e-6cfa-144a55c4d75d@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/phy/meson-gxl.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) (limited to 'drivers/net/phy') diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c index 7e7904fee1d9..c49062ad72c6 100644 --- a/drivers/net/phy/meson-gxl.c +++ b/drivers/net/phy/meson-gxl.c @@ -30,8 +30,12 @@ #define INTSRC_LINK_DOWN BIT(4) #define INTSRC_REMOTE_FAULT BIT(5) #define INTSRC_ANEG_COMPLETE BIT(6) +#define INTSRC_ENERGY_DETECT BIT(7) #define INTSRC_MASK 30 +#define INT_SOURCES (INTSRC_LINK_DOWN | INTSRC_ANEG_COMPLETE | \ + INTSRC_ENERGY_DETECT) + #define BANK_ANALOG_DSP 0 #define BANK_WOL 1 #define BANK_BIST 3 @@ -200,7 +204,6 @@ static int meson_gxl_ack_interrupt(struct phy_device *phydev) static int meson_gxl_config_intr(struct phy_device *phydev) { - u16 val; int ret; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { @@ -209,16 +212,9 @@ static int meson_gxl_config_intr(struct phy_device *phydev) if (ret) return ret; - val = INTSRC_ANEG_PR - | INTSRC_PARALLEL_FAULT - | INTSRC_ANEG_LP_ACK - | INTSRC_LINK_DOWN - | INTSRC_REMOTE_FAULT - | INTSRC_ANEG_COMPLETE; - ret = phy_write(phydev, INTSRC_MASK, val); + ret = phy_write(phydev, INTSRC_MASK, INT_SOURCES); } else { - val = 0; - ret = phy_write(phydev, INTSRC_MASK, val); + ret = phy_write(phydev, INTSRC_MASK, 0); /* Ack any pending IRQ */ ret = meson_gxl_ack_interrupt(phydev); @@ -237,9 +233,16 @@ static irqreturn_t meson_gxl_handle_interrupt(struct phy_device *phydev) return IRQ_NONE; } + irq_status &= INT_SOURCES; + if (irq_status == 0) return IRQ_NONE; + /* Aneg-complete interrupt is used for link-up detection */ + if (phydev->autoneg == AUTONEG_ENABLE && + irq_status == INTSRC_ENERGY_DETECT) + return IRQ_HANDLED; + phy_trigger_machine(phydev); return IRQ_HANDLED; -- cgit v1.2.3 From 37c9d66c95564c85a001d8a035354f0220a1e1c3 Mon Sep 17 00:00:00 2001 From: Clément Léger Date: Wed, 9 Mar 2022 15:22:28 +0100 Subject: net: phy: DP83822: clear MISR2 register to disable interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MISR1 was cleared twice but the original author intention was probably to clear MISR1 & MISR2 to completely disable interrupts. Fix it to clear MISR2. Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Clément Léger Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski --- drivers/net/phy/dp83822.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/phy') diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c index 211b5476a6f5..ce17b2af3218 100644 --- a/drivers/net/phy/dp83822.c +++ b/drivers/net/phy/dp83822.c @@ -274,7 +274,7 @@ static int dp83822_config_intr(struct phy_device *phydev) if (err < 0) return err; - err = phy_write(phydev, MII_DP83822_MISR1, 0); + err = phy_write(phydev, MII_DP83822_MISR2, 0); if (err < 0) return err; -- cgit v1.2.3 From 2c87c6f9fbddc5b84d67b2fa3f432fcac6d99d93 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 9 Mar 2022 22:04:47 +0100 Subject: net: phy: meson-gxl: improve link-up behavior Sometimes the link comes up but no data flows. This patch fixes this behavior. It's not clear what's the root cause of the issue. According to the tests one other link-up issue remains. In very rare cases the link isn't even reported as up. Fixes: 84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()") Tested-by: Erico Nunes Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/phy/meson-gxl.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net/phy') diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c index c49062ad72c6..73f7962a37d3 100644 --- a/drivers/net/phy/meson-gxl.c +++ b/drivers/net/phy/meson-gxl.c @@ -243,7 +243,13 @@ static irqreturn_t meson_gxl_handle_interrupt(struct phy_device *phydev) irq_status == INTSRC_ENERGY_DETECT) return IRQ_HANDLED; - phy_trigger_machine(phydev); + /* Give PHY some time before MAC starts sending data. This works + * around an issue where network doesn't come up properly. + */ + if (!(irq_status & INTSRC_LINK_DOWN)) + phy_queue_state_machine(phydev, msecs_to_jiffies(100)); + else + phy_trigger_machine(phydev); return IRQ_HANDLED; } -- cgit v1.2.3