From d9f5881242db8f9dc8a262c4bc613ba6fcb66bfc Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Delgado Date: Wed, 28 Jan 2015 13:23:45 +0100 Subject: spi/xilinx: Do not inhibit transmission in polling mode When no irq is used, there is no need to inhibit the transmission for every transaction. This inhibition was implemented to avoid a race condition with the irq handler. Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Mark Brown --- drivers/spi/spi-xilinx.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) (limited to 'drivers/spi/spi-xilinx.c') diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c index f21e857d54b1..6656b2c82693 100644 --- a/drivers/spi/spi-xilinx.c +++ b/drivers/spi/spi-xilinx.c @@ -163,6 +163,7 @@ static void xspi_rx32(struct xilinx_spi *xspi) static void xspi_init_hw(struct xilinx_spi *xspi) { void __iomem *regs_base = xspi->regs; + u32 inhibit; /* Reset the SPI device */ xspi->write_fn(XIPIF_V123B_RESET_MASK, @@ -173,16 +174,19 @@ static void xspi_init_hw(struct xilinx_spi *xspi) xspi->write_fn(XSPI_INTR_TX_EMPTY, regs_base + XIPIF_V123B_IIER_OFFSET); /* Enable the global IPIF interrupt */ - if (xspi->irq >= 0) + if (xspi->irq >= 0) { xspi->write_fn(XIPIF_V123B_GINTR_ENABLE, regs_base + XIPIF_V123B_DGIER_OFFSET); - else + inhibit = XSPI_CR_TRANS_INHIBIT; + } else { xspi->write_fn(0, regs_base + XIPIF_V123B_DGIER_OFFSET); + inhibit = 0; + } /* Deselect the slave on the SPI bus */ xspi->write_fn(0xffff, regs_base + XSPI_SSR_OFFSET); /* Disable the transmitter, enable Manual Slave Select Assertion, * put SPI controller into master mode, and enable it */ - xspi->write_fn(XSPI_CR_TRANS_INHIBIT | XSPI_CR_MANUAL_SSELECT | + xspi->write_fn(inhibit | XSPI_CR_MANUAL_SSELECT | XSPI_CR_MASTER_MODE | XSPI_CR_ENABLE | XSPI_CR_TXFIFO_RESET | XSPI_CR_RXFIFO_RESET, regs_base + XSPI_CR_OFFSET); } @@ -252,7 +256,7 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) reinit_completion(&xspi->done); while (xspi->remaining_bytes) { - u16 cr; + u16 cr = 0; int n_words; n_words = (xspi->remaining_bytes * 8) / xspi->bits_per_word; @@ -263,13 +267,13 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) /* Start the transfer by not inhibiting the transmitter any * longer */ - cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) & - ~XSPI_CR_TRANS_INHIBIT; - xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); - if (xspi->irq >= 0) + if (xspi->irq >= 0) { + cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) & + ~XSPI_CR_TRANS_INHIBIT; + xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); wait_for_completion(&xspi->done); - else + } else while (!(xspi->read_fn(xspi->regs + XSPI_SR_OFFSET) & XSPI_SR_TX_EMPTY_MASK)) ; @@ -279,7 +283,8 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) * transmitter while the Isr refills the transmit register/FIFO, * or make sure it is stopped if we're done. */ - xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT, + if (xspi->irq >= 0) + xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT, xspi->regs + XSPI_CR_OFFSET); /* Read out all the data from the Rx FIFO */ -- cgit v1.2.3