From ef8b9ddcb45fa3b1e11acd72be2398001e807d14 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Mon, 16 Jun 2014 08:10:41 -0400 Subject: serial: Fix IGNBRK handling If IGNBRK is set without either BRKINT or PARMRK set, some uart drivers send a 0x00 byte for BREAK without the TTYBREAK flag to the line discipline, when it should send either nothing or the TTYBREAK flag set. This happens because the read_status_mask masks out the BI condition, which uart_insert_char() then interprets as a normal 0x00 byte. SUS v3 is clear regarding the meaning of IGNBRK; Section 11.2.2, General Terminal Interface - Input Modes, states: "If IGNBRK is set, a break condition detected on input shall be ignored; that is, not put on the input queue and therefore not read by any process." Fix read_status_mask to include the BI bit if IGNBRK is set; the lsr status retains the BI bit if a BREAK is recv'd, which is subsequently ignored in uart_insert_char() when masked with the ignore_status_mask. Affected drivers: 8250 - all serial_txx9 mfd amba-pl010 amba-pl011 atmel_serial bfin_uart dz ip22zilog max310x mxs-auart netx-serial pnx8xxx_uart pxa sb1250-duart sccnxp serial_ks8695 sirfsoc_uart st-asc vr41xx_siu zs sunzilog fsl_lpuart sunsab ucc_uart bcm63xx_uart sunsu efm32-uart pmac_zilog mpsc msm_serial m32r_sio Unaffected drivers: omap-serial rp2 sa1100 imx icom Annotated for fixes: altera_uart mcf Drivers without break detection: 21285 xilinx-uartps altera_jtaguart apbuart arc-uart clps711x max3100 uartlite msm_serial_hs nwpserial lantiq vt8500_serial Unknown: samsung mpc52xx_uart bfin_sport_uart cpm_uart/core Fixes: Bugzilla #71651, '8250_core.c incorrectly handles IGNBRK flag' Reported-by: Ivan Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mcf.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/tty/serial/mcf.c') diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index 0edfaf8cd269..a6f085717f94 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -248,6 +248,12 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, mr1 |= MCFUART_MR1_PARITYNONE; } + /* + * FIXME: port->read_status_mask and port->ignore_status_mask + * need to be initialized based on termios settings for + * INPCK, IGNBRK, IGNPAR, PARMRK, BRKINT + */ + if (termios->c_cflag & CSTOPB) mr2 |= MCFUART_MR2_STOP2; else -- cgit v1.2.3