From b40de7469ef135161c80af0e8c462298cc5dac00 Mon Sep 17 00:00:00 2001 From: Patrik John Date: Tue, 23 Nov 2021 14:27:38 +0100 Subject: serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30 The current implementation uses 0 as lower limit for the baud rate tolerance for tegra20 and tegra30 chips which causes isses on UART initialization as soon as baud rate clock is lower than required even when within the standard UART tolerance of +/- 4%. This fix aligns the implementation with the initial commit description of +/- 4% tolerance for tegra chips other than tegra186 and tegra194. Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors") Cc: stable Signed-off-by: Patrik John Link: https://lore.kernel.org/r/sig.19614244f8.20211123132737.88341-1-patrik.john@u-blox.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial-tegra.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index 45e2e4109acd..b6223fab0687 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -1506,7 +1506,7 @@ static struct tegra_uart_chip_data tegra20_uart_chip_data = { .fifo_mode_enable_status = false, .uart_max_port = 5, .max_dma_burst_bytes = 4, - .error_tolerance_low_range = 0, + .error_tolerance_low_range = -4, .error_tolerance_high_range = 4, }; @@ -1517,7 +1517,7 @@ static struct tegra_uart_chip_data tegra30_uart_chip_data = { .fifo_mode_enable_status = false, .uart_max_port = 5, .max_dma_burst_bytes = 4, - .error_tolerance_low_range = 0, + .error_tolerance_low_range = -4, .error_tolerance_high_range = 4, }; -- cgit v1.2.3