From 671ffdff5b13314b1fc65d62cf7604b873fb5dc4 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 8 Apr 2016 16:25:06 +0300 Subject: xhci: resume USB 3 roothub first Give USB3 devices a better chance to enumerate at USB 3 speeds if they are connected to a suspended host. Solves an issue with NEC uPD720200 host hanging when partially enumerating a USB3 device as USB2 after host controller runtime resume. Cc: Tested-by: Mike Murdoch Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/usb/host/xhci.c') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index d51ee0c3cf9f..b60928802686 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1108,8 +1108,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* Resume root hubs only when have pending events. */ status = readl(&xhci->op_regs->status); if (status & STS_EINT) { - usb_hcd_resume_root_hub(hcd); usb_hcd_resume_root_hub(xhci->shared_hcd); + usb_hcd_resume_root_hub(hcd); } } @@ -1124,10 +1124,10 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* Re-enable port polling. */ xhci_dbg(xhci, "%s: starting port polling.\n", __func__); - set_bit(HCD_FLAG_POLL_RH, &hcd->flags); - usb_hcd_poll_rh_status(hcd); set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); usb_hcd_poll_rh_status(xhci->shared_hcd); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + usb_hcd_poll_rh_status(hcd); return retval; } -- cgit v1.2.3 From 0a380be8233dbf8dd20795b801c5d5d5ef3992f7 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 8 Apr 2016 16:25:07 +0300 Subject: usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORT On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0) of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit address memory pointers actually. So, in this case, this driver should call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in xhci_gen_setup(). Otherwise, the xHCI controller will be died after a usb device is connected if it runs on above 4GB physical memory environment. So, this patch adds a new quirk XHCI_NO_64BIT_SUPPORT to resolve such an issue. Cc: Signed-off-by: Yoshihiro Shimoda Reviewed-by: Felipe Balbi Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 10 ++++++++++ drivers/usb/host/xhci.h | 1 + 2 files changed, 11 insertions(+) (limited to 'drivers/usb/host/xhci.c') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b60928802686..9283d3331b59 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4948,6 +4948,16 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) return retval; xhci_dbg(xhci, "Reset complete\n"); + /* + * On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0) + * of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit + * address memory pointers actually. So, this driver clears the AC64 + * bit of xhci->hcc_params to call dma_set_coherent_mask(dev, + * DMA_BIT_MASK(32)) in this xhci_gen_setup(). + */ + if (xhci->quirks & XHCI_NO_64BIT_SUPPORT) + xhci->hcc_params &= ~BIT(0); + /* Set dma_mask and coherent_dma_mask to 64-bits, * if xHC supports 64-bit addressing */ if (HCC_64BIT_ADDR(xhci->hcc_params) && diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index e293e0974f48..70f215c20b2b 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1641,6 +1641,7 @@ struct xhci_hcd { #define XHCI_PME_STUCK_QUIRK (1 << 20) #define XHCI_MTK_HOST (1 << 21) #define XHCI_SSIC_PORT_UNUSED (1 << 22) +#define XHCI_NO_64BIT_SUPPORT (1 << 23) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ -- cgit v1.2.3 From 98d74f9ceaefc2b6c4a6440050163a83be0abede Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 8 Apr 2016 16:25:10 +0300 Subject: xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will remove the xhci controller from the PCI bus when the last USB device is disconnected. Add a flag to indicate that the host is being removed to avoid queueing configure_endpoint commands for the dropped endpoints. For PCI hotplugged controllers this will prevent 5 second command timeouts For static xhci controllers the configure_endpoint command is not needed in the removal case as everything will be returned, freed, and the controller is reset. For now the flag is only set for PCI connected host controllers. Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 1 + drivers/usb/host/xhci-ring.c | 3 ++- drivers/usb/host/xhci.c | 8 +++++--- drivers/usb/host/xhci.h | 1 + 4 files changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers/usb/host/xhci.c') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 071b34ae9c4e..48672fac7ff3 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -304,6 +304,7 @@ static void xhci_pci_remove(struct pci_dev *dev) struct xhci_hcd *xhci; xhci = hcd_to_xhci(pci_get_drvdata(dev)); + xhci->xhc_state |= XHCI_STATE_REMOVING; if (xhci->shared_hcd) { usb_remove_hcd(xhci->shared_hcd); usb_put_hcd(xhci->shared_hcd); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 7cf66212ceae..99b4ff42f7a0 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -4004,7 +4004,8 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd, int reserved_trbs = xhci->cmd_ring_reserved_trbs; int ret; - if (xhci->xhc_state) { + if ((xhci->xhc_state & XHCI_STATE_DYING) || + (xhci->xhc_state & XHCI_STATE_HALTED)) { xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n"); return -ESHUTDOWN; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 9283d3331b59..9e71c96ad74a 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -147,7 +147,8 @@ static int xhci_start(struct xhci_hcd *xhci) "waited %u microseconds.\n", XHCI_MAX_HALT_USEC); if (!ret) - xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING); + /* clear state flags. Including dying, halted or removing */ + xhci->xhc_state = 0; return ret; } @@ -2773,7 +2774,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) if (ret <= 0) return ret; xhci = hcd_to_xhci(hcd); - if (xhci->xhc_state & XHCI_STATE_DYING) + if ((xhci->xhc_state & XHCI_STATE_DYING) || + (xhci->xhc_state & XHCI_STATE_REMOVING)) return -ENODEV; xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); @@ -3820,7 +3822,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, mutex_lock(&xhci->mutex); - if (xhci->xhc_state) /* dying or halted */ + if (xhci->xhc_state) /* dying, removing or halted */ goto out; if (!udev->slot_id) { diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 70f215c20b2b..6c629c97f8ad 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1605,6 +1605,7 @@ struct xhci_hcd { */ #define XHCI_STATE_DYING (1 << 0) #define XHCI_STATE_HALTED (1 << 1) +#define XHCI_STATE_REMOVING (1 << 2) /* Statistics */ int error_bitmask; unsigned int quirks; -- cgit v1.2.3