From 6adbfbab0f039bb89edb9d3ad0d9ac8a18efa6db Mon Sep 17 00:00:00 2001 From: Philippe Boos Date: Mon, 1 Aug 2022 11:21:50 +0200 Subject: watchdog: meson: keep running if already active If the watchdog is already running (e.g.: started by bootloader) then the kernel driver should keep the watchdog active but the amlogic driver turns it off. Let the driver fix the clock rate if already active because we do not know the previous timebase value. To avoid unintentional resetting we temporarily set it to its maximum value. Then keep the enable bit if is was previously active. Signed-off-by: Philippe Boos Reviewed-by: Jerome Brunet Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20220801092150.4449-1-pboos@baylibre.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/meson_gxbb_wdt.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) (limited to 'drivers/watchdog') diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c index d3c9e2f6e63b..981a2f7c3bec 100644 --- a/drivers/watchdog/meson_gxbb_wdt.c +++ b/drivers/watchdog/meson_gxbb_wdt.c @@ -156,6 +156,7 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct meson_gxbb_wdt *data; int ret; + u32 ctrl_reg; data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) @@ -189,13 +190,26 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev) watchdog_set_nowayout(&data->wdt_dev, nowayout); watchdog_set_drvdata(&data->wdt_dev, data); + ctrl_reg = readl(data->reg_base + GXBB_WDT_CTRL_REG) & + GXBB_WDT_CTRL_EN; + + if (ctrl_reg) { + /* Watchdog is running - keep it running but extend timeout + * to the maximum while setting the timebase + */ + set_bit(WDOG_HW_RUNNING, &data->wdt_dev.status); + meson_gxbb_wdt_set_timeout(&data->wdt_dev, + GXBB_WDT_TCNT_SETUP_MASK / 1000); + } + /* Setup with 1ms timebase */ - writel(((clk_get_rate(data->clk) / 1000) & GXBB_WDT_CTRL_DIV_MASK) | - GXBB_WDT_CTRL_EE_RESET | - GXBB_WDT_CTRL_CLK_EN | - GXBB_WDT_CTRL_CLKDIV_EN, - data->reg_base + GXBB_WDT_CTRL_REG); + ctrl_reg |= ((clk_get_rate(data->clk) / 1000) & + GXBB_WDT_CTRL_DIV_MASK) | + GXBB_WDT_CTRL_EE_RESET | + GXBB_WDT_CTRL_CLK_EN | + GXBB_WDT_CTRL_CLKDIV_EN; + writel(ctrl_reg, data->reg_base + GXBB_WDT_CTRL_REG); meson_gxbb_wdt_set_timeout(&data->wdt_dev, data->wdt_dev.timeout); return devm_watchdog_register_device(dev, &data->wdt_dev); -- cgit v1.2.3