From 96f372c95d32f76fa2b0e035e0a6269234bfda09 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 7 Apr 2011 19:07:17 +0200 Subject: ath9k: fix missing ath9k_ps_wakeup/ath9k_ps_restore calls These missing chip wakeups mainly cause crashes on AR5416 cards in MIPS boards, but have also been reported to cause radio stability issues on AR9285. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index dddb85de622d..17d04ff8d678 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1376,7 +1376,6 @@ static void ath9k_calculate_summary_state(struct ieee80211_hw *hw, ath9k_calculate_iter_data(hw, vif, &iter_data); - ath9k_ps_wakeup(sc); /* Set BSSID mask. */ memcpy(common->bssidmask, iter_data.mask, ETH_ALEN); ath_hw_setbssidmask(common); @@ -1411,7 +1410,6 @@ static void ath9k_calculate_summary_state(struct ieee80211_hw *hw, } ath9k_hw_set_interrupts(ah, ah->imask); - ath9k_ps_restore(sc); /* Set up ANI */ if ((iter_data.naps + iter_data.nadhocs) > 0) { @@ -1457,6 +1455,7 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, struct ath_vif *avp = (void *)vif->drv_priv; int ret = 0; + ath9k_ps_wakeup(sc); mutex_lock(&sc->mutex); switch (vif->type) { @@ -1503,6 +1502,7 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, ath9k_do_vif_add_setup(hw, vif); out: mutex_unlock(&sc->mutex); + ath9k_ps_restore(sc); return ret; } @@ -1517,6 +1517,7 @@ static int ath9k_change_interface(struct ieee80211_hw *hw, ath_dbg(common, ATH_DBG_CONFIG, "Change Interface\n"); mutex_lock(&sc->mutex); + ath9k_ps_wakeup(sc); /* See if new interface type is valid. */ if ((new_type == NL80211_IFTYPE_ADHOC) && @@ -1546,6 +1547,7 @@ static int ath9k_change_interface(struct ieee80211_hw *hw, ath9k_do_vif_add_setup(hw, vif); out: + ath9k_ps_restore(sc); mutex_unlock(&sc->mutex); return ret; } @@ -1558,6 +1560,7 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, ath_dbg(common, ATH_DBG_CONFIG, "Detach Interface\n"); + ath9k_ps_wakeup(sc); mutex_lock(&sc->mutex); sc->nvifs--; @@ -1569,6 +1572,7 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, ath9k_calculate_summary_state(hw, NULL); mutex_unlock(&sc->mutex); + ath9k_ps_restore(sc); } static void ath9k_enable_ps(struct ath_softc *sc) @@ -1809,6 +1813,7 @@ static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue, txq = sc->tx.txq_map[queue]; + ath9k_ps_wakeup(sc); mutex_lock(&sc->mutex); memset(&qi, 0, sizeof(struct ath9k_tx_queue_info)); @@ -1832,6 +1837,7 @@ static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue, ath_beaconq_config(sc); mutex_unlock(&sc->mutex); + ath9k_ps_restore(sc); return ret; } @@ -1894,6 +1900,7 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, int slottime; int error; + ath9k_ps_wakeup(sc); mutex_lock(&sc->mutex); if (changed & BSS_CHANGED_BSSID) { @@ -1994,6 +2001,7 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, } mutex_unlock(&sc->mutex); + ath9k_ps_restore(sc); } static u64 ath9k_get_tsf(struct ieee80211_hw *hw) -- cgit v1.2.3 From a6756da9eace8b4af73e9dea43f1fc2889224c94 Mon Sep 17 00:00:00 2001 From: Jason Conti Date: Thu, 7 Apr 2011 21:09:57 +0200 Subject: p54: Initialize extra_len in p54_tx_80211 This patch fixes a very serious off-by-one bug in the driver, which could leave the device in an unresponsive state. The problem was that the extra_len variable [used to reserve extra scratch buffer space for the firmware] was left uninitialized. Because p54_assign_address later needs the value to reserve additional space, the resulting frame could be to big for the small device's memory window and everything would immediately come to a grinding halt. Reference: https://bugs.launchpad.net/bugs/722185 Cc: Acked-by: Christian Lamparter Signed-off-by: Jason Conti Signed-off-by: John W. Linville --- drivers/net/wireless/p54/txrx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c index 7834c26c2954..042842e704de 100644 --- a/drivers/net/wireless/p54/txrx.c +++ b/drivers/net/wireless/p54/txrx.c @@ -703,7 +703,7 @@ void p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb) struct p54_tx_info *p54info; struct p54_hdr *hdr; struct p54_tx_data *txhdr; - unsigned int padding, len, extra_len; + unsigned int padding, len, extra_len = 0; int i, j, ridx; u16 hdr_flags = 0, aid = 0; u8 rate, queue = 0, crypt_offset = 0; -- cgit v1.2.3 From 4a39e781682828c1b81a839e7d343fd91945a8d5 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 11 Apr 2011 13:02:06 -0400 Subject: iwlegacy: make iwl3945 and iwl4965 select IWLWIFI_LEGACY Otherwise, IWLWIFI_LEGACY has to be selected independently before the drivers are made available. Reported-by: Dave Airlie Signed-off-by: John W. Linville Cc: Stanislaw Gruszka Cc: Wey-Yi Guy --- drivers/net/wireless/iwlegacy/Kconfig | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlegacy/Kconfig b/drivers/net/wireless/iwlegacy/Kconfig index 2a45dd44cc12..aef65cd47661 100644 --- a/drivers/net/wireless/iwlegacy/Kconfig +++ b/drivers/net/wireless/iwlegacy/Kconfig @@ -1,6 +1,5 @@ config IWLWIFI_LEGACY - tristate "Intel Wireless Wifi legacy devices" - depends on PCI && MAC80211 + tristate select FW_LOADER select NEW_LEDS select LEDS_CLASS @@ -65,7 +64,8 @@ endmenu config IWL4965 tristate "Intel Wireless WiFi 4965AGN (iwl4965)" - depends on IWLWIFI_LEGACY + depends on PCI && MAC80211 + select IWLWIFI_LEGACY ---help--- This option enables support for @@ -92,7 +92,8 @@ config IWL4965 config IWL3945 tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)" - depends on IWLWIFI_LEGACY + depends on PCI && MAC80211 + select IWLWIFI_LEGACY ---help--- Select to build the driver supporting the: -- cgit v1.2.3 From 5882da02e9d9089b7e8c739f3e774aaeeff8b7ba Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 8 Apr 2011 20:13:18 +0200 Subject: ath9k_hw: fix stopping rx DMA during resets During PHY errors, the MAC can sometimes fail to enter an idle state on older hardware (before AR9380) after an rx stop has been requested. This typically shows up in the kernel log with messages like these: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up ------------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/ath9k/recv.c:504 ath_stoprecv+0xcc/0xf0 [ath9k]() Call Trace: [<8023f0e8>] dump_stack+0x8/0x34 [<80075050>] warn_slowpath_common+0x78/0xa4 [<80075094>] warn_slowpath_null+0x18/0x24 [<80d66d60>] ath_stoprecv+0xcc/0xf0 [ath9k] [<80d642cc>] ath_set_channel+0xbc/0x270 [ath9k] [<80d65254>] ath_radio_disable+0x4a4/0x7fc [ath9k] When this happens, the state that the MAC enters is easy to identify and does not result in bogus DMA traffic, however to ensure a working state after a channel change, the hardware should still be reset. This patch adds detection for this specific MAC state, after which the above warnings completely disappear in my tests. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Cc: Kyungwan Nam Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 9 --------- drivers/net/wireless/ath/ath9k/mac.c | 25 ++++++++++++++++++++++--- drivers/net/wireless/ath/ath9k/mac.h | 2 +- drivers/net/wireless/ath/ath9k/recv.c | 6 +++--- 4 files changed, 26 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 1ec9bcd6b281..c95bc5cc1a1f 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1254,15 +1254,6 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, ah->txchainmask = common->tx_chainmask; ah->rxchainmask = common->rx_chainmask; - if ((common->bus_ops->ath_bus_type != ATH_USB) && !ah->chip_fullsleep) { - ath9k_hw_abortpcurecv(ah); - if (!ath9k_hw_stopdmarecv(ah)) { - ath_dbg(common, ATH_DBG_XMIT, - "Failed to stop receive dma\n"); - bChannelChange = false; - } - } - if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) return -EIO; diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 562257ac52cf..edc1cbbfecaf 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -751,28 +751,47 @@ void ath9k_hw_abortpcurecv(struct ath_hw *ah) } EXPORT_SYMBOL(ath9k_hw_abortpcurecv); -bool ath9k_hw_stopdmarecv(struct ath_hw *ah) +bool ath9k_hw_stopdmarecv(struct ath_hw *ah, bool *reset) { #define AH_RX_STOP_DMA_TIMEOUT 10000 /* usec */ #define AH_RX_TIME_QUANTUM 100 /* usec */ struct ath_common *common = ath9k_hw_common(ah); + u32 mac_status, last_mac_status = 0; int i; + /* Enable access to the DMA observation bus */ + REG_WRITE(ah, AR_MACMISC, + ((AR_MACMISC_DMA_OBS_LINE_8 << AR_MACMISC_DMA_OBS_S) | + (AR_MACMISC_MISC_OBS_BUS_1 << + AR_MACMISC_MISC_OBS_BUS_MSB_S))); + REG_WRITE(ah, AR_CR, AR_CR_RXD); /* Wait for rx enable bit to go low */ for (i = AH_RX_STOP_DMA_TIMEOUT / AH_TIME_QUANTUM; i != 0; i--) { if ((REG_READ(ah, AR_CR) & AR_CR_RXE) == 0) break; + + if (!AR_SREV_9300_20_OR_LATER(ah)) { + mac_status = REG_READ(ah, AR_DMADBG_7) & 0x7f0; + if (mac_status == 0x1c0 && mac_status == last_mac_status) { + *reset = true; + break; + } + + last_mac_status = mac_status; + } + udelay(AH_TIME_QUANTUM); } if (i == 0) { ath_err(common, - "DMA failed to stop in %d ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n", + "DMA failed to stop in %d ms AR_CR=0x%08x AR_DIAG_SW=0x%08x DMADBG_7=0x%08x\n", AH_RX_STOP_DMA_TIMEOUT / 1000, REG_READ(ah, AR_CR), - REG_READ(ah, AR_DIAG_SW)); + REG_READ(ah, AR_DIAG_SW), + REG_READ(ah, AR_DMADBG_7)); return false; } else { return true; diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h index b2b2ff852c32..c2a59386fb9c 100644 --- a/drivers/net/wireless/ath/ath9k/mac.h +++ b/drivers/net/wireless/ath/ath9k/mac.h @@ -695,7 +695,7 @@ bool ath9k_hw_setrxabort(struct ath_hw *ah, bool set); void ath9k_hw_putrxbuf(struct ath_hw *ah, u32 rxdp); void ath9k_hw_startpcureceive(struct ath_hw *ah, bool is_scanning); void ath9k_hw_abortpcurecv(struct ath_hw *ah); -bool ath9k_hw_stopdmarecv(struct ath_hw *ah); +bool ath9k_hw_stopdmarecv(struct ath_hw *ah, bool *reset); int ath9k_hw_beaconq_setup(struct ath_hw *ah); /* Interrupt Handling */ diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index a9c3f4672aa0..dcd19bc337d1 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -486,12 +486,12 @@ start_recv: bool ath_stoprecv(struct ath_softc *sc) { struct ath_hw *ah = sc->sc_ah; - bool stopped; + bool stopped, reset = false; spin_lock_bh(&sc->rx.rxbuflock); ath9k_hw_abortpcurecv(ah); ath9k_hw_setrxfilter(ah, 0); - stopped = ath9k_hw_stopdmarecv(ah); + stopped = ath9k_hw_stopdmarecv(ah, &reset); if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) ath_edma_stop_recv(sc); @@ -506,7 +506,7 @@ bool ath_stoprecv(struct ath_softc *sc) "confusing the DMA engine when we start RX up\n"); ATH_DBG_WARN_ON_ONCE(!stopped); } - return stopped; + return stopped || reset; } void ath_flushrecv(struct ath_softc *sc) -- cgit v1.2.3 From 50f6871218802be528961e24487f00c203a5c3c7 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 11 Apr 2011 22:56:55 +0530 Subject: ath9k_htc: Fix ethtool reporting Pass the correct module name and device interface so that ethtool can display the proper values. The firmware version will be fixed later on when the FW can actually report a version. :) Reported-by: Richard Farina Signed-off-by: Sujith Manoharan Tested-by: Richard Farina Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index f1b8af64569c..2d10239ce829 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -1040,7 +1040,7 @@ static int ath9k_hif_usb_probe(struct usb_interface *interface, } ret = ath9k_htc_hw_init(hif_dev->htc_handle, - &hif_dev->udev->dev, hif_dev->device_id, + &interface->dev, hif_dev->device_id, hif_dev->udev->product, id->driver_info); if (ret) { ret = -EINVAL; @@ -1158,7 +1158,7 @@ fail_resume: #endif static struct usb_driver ath9k_hif_usb_driver = { - .name = "ath9k_hif_usb", + .name = KBUILD_MODNAME, .probe = ath9k_hif_usb_probe, .disconnect = ath9k_hif_usb_disconnect, #ifdef CONFIG_PM -- cgit v1.2.3 From 332704a51498a7e29aa92c19dc03f11f80b71bfe Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 13 Apr 2011 10:56:51 +0200 Subject: iwlegacy: fix tx_power initialization priv->tx_power_next is not initialized to max supported power, but instead default value is used, what cause errors like [ 58.597834] iwl3945 0000:03:00.0: Requested user TXPOWER 15 above upper limit 14. [ 58.597839] iwl3945 0000:03:00.0: Error setting Tx power (-22). if maximum tx power read from the eeprom is smaller than default. In consequence card is unable to initialize properly. Fix the problem and cleanup tx power initialization. Reported-and-tested-by: Robin Dong Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-3945-hw.h | 2 -- drivers/net/wireless/iwlegacy/iwl-4965-hw.h | 3 --- drivers/net/wireless/iwlegacy/iwl-core.c | 17 +++++++++++------ drivers/net/wireless/iwlegacy/iwl-eeprom.c | 7 ------- drivers/net/wireless/iwlegacy/iwl3945-base.c | 4 ---- drivers/net/wireless/iwlegacy/iwl4965-base.c | 6 ------ 6 files changed, 11 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlegacy/iwl-3945-hw.h b/drivers/net/wireless/iwlegacy/iwl-3945-hw.h index 779d3cb86e2c..5c3a68d3af12 100644 --- a/drivers/net/wireless/iwlegacy/iwl-3945-hw.h +++ b/drivers/net/wireless/iwlegacy/iwl-3945-hw.h @@ -74,8 +74,6 @@ /* RSSI to dBm */ #define IWL39_RSSI_OFFSET 95 -#define IWL_DEFAULT_TX_POWER 0x0F - /* * EEPROM related constants, enums, and structures. */ diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-hw.h b/drivers/net/wireless/iwlegacy/iwl-4965-hw.h index 08b189c8472d..fc6fa2886d9c 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965-hw.h +++ b/drivers/net/wireless/iwlegacy/iwl-4965-hw.h @@ -804,9 +804,6 @@ struct iwl4965_scd_bc_tbl { #define IWL4965_DEFAULT_TX_RETRY 15 -/* Limit range of txpower output target to be between these values */ -#define IWL4965_TX_POWER_TARGET_POWER_MIN (0) /* 0 dBm: 1 milliwatt */ - /* EEPROM */ #define IWL4965_FIRST_AMPDU_QUEUE 10 diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c index a209a0e76bf0..2b08efb3b658 100644 --- a/drivers/net/wireless/iwlegacy/iwl-core.c +++ b/drivers/net/wireless/iwlegacy/iwl-core.c @@ -160,6 +160,7 @@ int iwl_legacy_init_geos(struct iwl_priv *priv) struct ieee80211_channel *geo_ch; struct ieee80211_rate *rates; int i = 0; + s8 max_tx_power = 0; if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates || priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) { @@ -235,8 +236,8 @@ int iwl_legacy_init_geos(struct iwl_priv *priv) geo_ch->flags |= ch->ht40_extension_channel; - if (ch->max_power_avg > priv->tx_power_device_lmt) - priv->tx_power_device_lmt = ch->max_power_avg; + if (ch->max_power_avg > max_tx_power) + max_tx_power = ch->max_power_avg; } else { geo_ch->flags |= IEEE80211_CHAN_DISABLED; } @@ -249,6 +250,10 @@ int iwl_legacy_init_geos(struct iwl_priv *priv) geo_ch->flags); } + priv->tx_power_device_lmt = max_tx_power; + priv->tx_power_user_lmt = max_tx_power; + priv->tx_power_next = max_tx_power; + if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) && priv->cfg->sku & IWL_SKU_A) { IWL_INFO(priv, "Incorrectly detected BG card as ABG. " @@ -1124,11 +1129,11 @@ int iwl_legacy_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) if (!priv->cfg->ops->lib->send_tx_power) return -EOPNOTSUPP; - if (tx_power < IWL4965_TX_POWER_TARGET_POWER_MIN) { + /* 0 dBm mean 1 milliwatt */ + if (tx_power < 0) { IWL_WARN(priv, - "Requested user TXPOWER %d below lower limit %d.\n", - tx_power, - IWL4965_TX_POWER_TARGET_POWER_MIN); + "Requested user TXPOWER %d below 1 mW.\n", + tx_power); return -EINVAL; } diff --git a/drivers/net/wireless/iwlegacy/iwl-eeprom.c b/drivers/net/wireless/iwlegacy/iwl-eeprom.c index 04c5648027df..cb346d1a9ffa 100644 --- a/drivers/net/wireless/iwlegacy/iwl-eeprom.c +++ b/drivers/net/wireless/iwlegacy/iwl-eeprom.c @@ -471,13 +471,6 @@ int iwl_legacy_init_channel_map(struct iwl_priv *priv) flags & EEPROM_CHANNEL_RADAR)) ? "" : "not "); - /* Set the tx_power_user_lmt to the highest power - * supported by any channel */ - if (eeprom_ch_info[ch].max_power_avg > - priv->tx_power_user_lmt) - priv->tx_power_user_lmt = - eeprom_ch_info[ch].max_power_avg; - ch_info++; } } diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c index 28eb3d885ba1..cc7ebcee60e5 100644 --- a/drivers/net/wireless/iwlegacy/iwl3945-base.c +++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c @@ -3825,10 +3825,6 @@ static int iwl3945_init_drv(struct iwl_priv *priv) priv->force_reset[IWL_FW_RESET].reset_duration = IWL_DELAY_NEXT_FORCE_FW_RELOAD; - - priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER; - priv->tx_power_next = IWL_DEFAULT_TX_POWER; - if (eeprom->version < EEPROM_3945_EEPROM_VERSION) { IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n", eeprom->version); diff --git a/drivers/net/wireless/iwlegacy/iwl4965-base.c b/drivers/net/wireless/iwlegacy/iwl4965-base.c index 91b3d8b9d7a5..d484c3678163 100644 --- a/drivers/net/wireless/iwlegacy/iwl4965-base.c +++ b/drivers/net/wireless/iwlegacy/iwl4965-base.c @@ -3140,12 +3140,6 @@ static int iwl4965_init_drv(struct iwl_priv *priv) iwl_legacy_init_scan_params(priv); - /* Set the tx_power_user_lmt to the lowest power level - * this value will get overwritten by channel max power avg - * from eeprom */ - priv->tx_power_user_lmt = IWL4965_TX_POWER_TARGET_POWER_MIN; - priv->tx_power_next = IWL4965_TX_POWER_TARGET_POWER_MIN; - ret = iwl_legacy_init_channel_map(priv); if (ret) { IWL_ERR(priv, "initializing regulatory failed: %d\n", ret); -- cgit v1.2.3 From 7caa2316bf0434f1150f58cb576542987a0466d7 Mon Sep 17 00:00:00 2001 From: Daniel Halperin Date: Wed, 6 Apr 2011 12:47:25 -0700 Subject: iwlwifi: fix frame injection for HT channels For some reason, sending QoS configuration causes transmission to stop after a single frame on HT channels when not associated. Removing the extra QoS configuration has no effect on station mode, and fixes injection mode. Signed-off-by: Daniel Halperin Signed-off-by: Wey-Yi Guy --- drivers/net/wireless/iwlwifi/iwl-agn-rxon.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c index dfdbea6e8f99..fbbde0712fa5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c @@ -335,7 +335,6 @@ int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed) struct ieee80211_channel *channel = conf->channel; const struct iwl_channel_info *ch_info; int ret = 0; - bool ht_changed[NUM_IWL_RXON_CTX] = {}; IWL_DEBUG_MAC80211(priv, "changed %#x", changed); @@ -383,10 +382,8 @@ int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed) for_each_context(priv, ctx) { /* Configure HT40 channels */ - if (ctx->ht.enabled != conf_is_ht(conf)) { + if (ctx->ht.enabled != conf_is_ht(conf)) ctx->ht.enabled = conf_is_ht(conf); - ht_changed[ctx->ctxid] = true; - } if (ctx->ht.enabled) { if (conf_is_ht40_minus(conf)) { @@ -455,8 +452,6 @@ int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed) if (!memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) continue; iwlagn_commit_rxon(priv, ctx); - if (ht_changed[ctx->ctxid]) - iwlagn_update_qos(priv, ctx); } out: mutex_unlock(&priv->mutex); -- cgit v1.2.3 From 2232d31bf18ba02f5cd632bbfc3466aeca394c75 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 15 Apr 2011 00:41:43 +0200 Subject: ath9k: fix the return value of ath_stoprecv The patch 'ath9k_hw: fix stopping rx DMA during resets' added code to detect a condition where rx DMA was stopped, but the MAC failed to enter the idle state. This condition requires a hardware reset, however the return value of ath_stoprecv was 'true' in that case, which allowed it to skip the reset when issuing a fast channel change. Signed-off-by: Felix Fietkau Reported-by: Paul Stewart Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index dcd19bc337d1..b29c80def35e 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -506,7 +506,7 @@ bool ath_stoprecv(struct ath_softc *sc) "confusing the DMA engine when we start RX up\n"); ATH_DBG_WARN_ON_ONCE(!stopped); } - return stopped || reset; + return stopped && !reset; } void ath_flushrecv(struct ath_softc *sc) -- cgit v1.2.3 From b25026981aecde3685dd0e45ad980fff9f528daa Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 20 Apr 2011 15:57:14 +0200 Subject: iwlwifi: fix skb usage after free Since commit a120e912eb51e347f36c71b60a1d13af74d30e83 Author: Stanislaw Gruszka Date: Fri Feb 19 15:47:33 2010 -0800 iwlwifi: sanity check before counting number of tfds can be free we use skb->data after calling ieee80211_tx_status_irqsafe(), which could free skb instantly. On current kernels I do not observe practical problems related with bug, but on 2.6.35.y it cause random system hangs when stressing wireless link. Cc: stable@kernel.org # 2.6.32+ Signed-off-by: Stanislaw Gruszka Acked-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-tx.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c index a709d05c5868..2dd7d54a796f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c @@ -1224,12 +1224,16 @@ int iwlagn_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) { tx_info = &txq->txb[txq->q.read_ptr]; - iwlagn_tx_status(priv, tx_info, - txq_id >= IWLAGN_FIRST_AMPDU_QUEUE); + + if (WARN_ON_ONCE(tx_info->skb == NULL)) + continue; hdr = (struct ieee80211_hdr *)tx_info->skb->data; - if (hdr && ieee80211_is_data_qos(hdr->frame_control)) + if (ieee80211_is_data_qos(hdr->frame_control)) nfreed++; + + iwlagn_tx_status(priv, tx_info, + txq_id >= IWLAGN_FIRST_AMPDU_QUEUE); tx_info->skb = NULL; if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl) -- cgit v1.2.3 From 069f40fc07f6df3da325e7ea1698a0d6247983d5 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 20 Apr 2011 16:01:46 +0200 Subject: iwl4965: fix skb usage after free Since commit a120e912eb51e347f36c71b60a1d13af74d30e83 Author: Stanislaw Gruszka Date: Fri Feb 19 15:47:33 2010 -0800 iwlwifi: sanity check before counting number of tfds can be free we use skb->data after calling ieee80211_tx_status_irqsafe(), which could free skb instantly. On current kernels I do not observe practical problems related with bug, but on 2.6.35.y it cause random system hangs when stressing wireless link, making bisection of other problems impossible. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-4965-tx.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-tx.c b/drivers/net/wireless/iwlegacy/iwl-4965-tx.c index 5c40502f869a..fbec88d48f1b 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965-tx.c +++ b/drivers/net/wireless/iwlegacy/iwl-4965-tx.c @@ -1127,12 +1127,16 @@ int iwl4965_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) q->read_ptr = iwl_legacy_queue_inc_wrap(q->read_ptr, q->n_bd)) { tx_info = &txq->txb[txq->q.read_ptr]; - iwl4965_tx_status(priv, tx_info, - txq_id >= IWL4965_FIRST_AMPDU_QUEUE); + + if (WARN_ON_ONCE(tx_info->skb == NULL)) + continue; hdr = (struct ieee80211_hdr *)tx_info->skb->data; - if (hdr && ieee80211_is_data_qos(hdr->frame_control)) + if (ieee80211_is_data_qos(hdr->frame_control)) nfreed++; + + iwl4965_tx_status(priv, tx_info, + txq_id >= IWL4965_FIRST_AMPDU_QUEUE); tx_info->skb = NULL; priv->cfg->ops->lib->txq_free_tfd(priv, txq); -- cgit v1.2.3