From e275d2109cdaea8b4554b9eb8a828bdb8f8ba068 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 26 Oct 2020 10:08:47 +0200 Subject: bus: ti-sysc: Fix reset status check for modules with quirks Commit d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit") started showing a "OCP softreset timed out" warning on enable if the interconnect target module is not out of reset. This caused the warning to be often triggered for i2c and hdq while the devices are working properly. Turns out that some interconnect target modules seem to have an unusable reset status bits unless the module specific reset quirks are activated. Let's just skip the reset status check for those modules as we only want to activate the reset quirks when doing a reset, and not on enable. This way we don't see the bogus "OCP softreset timed out" warnings during boot. Fixes: d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit") Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index efb088df1276..88a751c11677 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -970,9 +970,15 @@ static int sysc_enable_module(struct device *dev) return error; } } - error = sysc_wait_softreset(ddata); - if (error) - dev_warn(ddata->dev, "OCP softreset timed out\n"); + /* + * Some modules like i2c and hdq1w have unusable reset status unless + * the module reset quirk is enabled. Skip status check on enable. + */ + if (!(ddata->cfg.quirks & SYSC_MODULE_QUIRK_ENA_RESETDONE)) { + error = sysc_wait_softreset(ddata); + if (error) + dev_warn(ddata->dev, "OCP softreset timed out\n"); + } if (ddata->cfg.quirks & SYSC_QUIRK_OPT_CLKS_IN_RESET) sysc_disable_opt_clocks(ddata); @@ -1373,17 +1379,17 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK("hdmi", 0, 0, 0x10, -ENODEV, 0x50030200, 0xffffffff, SYSC_QUIRK_OPT_CLKS_NEEDED), SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff, - SYSC_MODULE_QUIRK_HDQ1W), + SYSC_MODULE_QUIRK_HDQ1W | SYSC_MODULE_QUIRK_ENA_RESETDONE), SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff, - SYSC_MODULE_QUIRK_HDQ1W), + SYSC_MODULE_QUIRK_HDQ1W | SYSC_MODULE_QUIRK_ENA_RESETDONE), SYSC_QUIRK("i2c", 0, 0, 0x20, 0x10, 0x00000036, 0x000000ff, - SYSC_MODULE_QUIRK_I2C), + SYSC_MODULE_QUIRK_I2C | SYSC_MODULE_QUIRK_ENA_RESETDONE), SYSC_QUIRK("i2c", 0, 0, 0x20, 0x10, 0x0000003c, 0x000000ff, - SYSC_MODULE_QUIRK_I2C), + SYSC_MODULE_QUIRK_I2C | SYSC_MODULE_QUIRK_ENA_RESETDONE), SYSC_QUIRK("i2c", 0, 0, 0x20, 0x10, 0x00000040, 0x000000ff, - SYSC_MODULE_QUIRK_I2C), + SYSC_MODULE_QUIRK_I2C | SYSC_MODULE_QUIRK_ENA_RESETDONE), SYSC_QUIRK("i2c", 0, 0, 0x10, 0x90, 0x5040000a, 0xfffff0f0, - SYSC_MODULE_QUIRK_I2C), + SYSC_MODULE_QUIRK_I2C | SYSC_MODULE_QUIRK_ENA_RESETDONE), SYSC_QUIRK("gpu", 0x50000000, 0x14, -ENODEV, -ENODEV, 0x00010201, 0xffffffff, 0), SYSC_QUIRK("gpu", 0x50000000, 0xfe00, 0xfe10, -ENODEV, 0x40000000 , 0xffffffff, SYSC_MODULE_QUIRK_SGX), -- cgit v1.2.3 From e7ae08d398e094e1305dee823435b1f996d39106 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 26 Oct 2020 10:08:47 +0200 Subject: bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw Bail out early from sysc_wait_softreset() just like we do in sysc_reset() if there's no sysstatus srst_shift to fix a bogus resetdone warning on enable as suggested by Grygorii Strashko . We do not currently handle resets for modules that need writing to the sysstatus register. If we at some point add that, we also need to add SYSS_QUIRK_RESETDONE_INVERTED flag for cpsw as the sysstatus bit is low when reset is done as described in the am335x TRM "Table 14-202 SOFT_RESET Register Field Descriptions" Fixes: d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit") Suggested-by: Grygorii Strashko Acked-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 88a751c11677..16132e6e91f8 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -227,6 +227,9 @@ static int sysc_wait_softreset(struct sysc *ddata) u32 sysc_mask, syss_done, rstval; int syss_offset, error = 0; + if (ddata->cap->regbits->srst_shift < 0) + return 0; + syss_offset = ddata->offsets[SYSC_SYSSTATUS]; sysc_mask = BIT(ddata->cap->regbits->srst_shift); -- cgit v1.2.3 From 65fb73676112f6fd107c5e542b2cbcfb206fe881 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Wed, 18 Nov 2020 16:19:00 +0200 Subject: bus: ti-sysc: suppress err msg for timers used as clockevent/source GP Timers used as clockevent/source are not available for ti-sysc bus and handled by Kernel timekeeping core. Now ti-sysc produces error message every time such timer is detected: "ti-sysc: probe of 48040000.target-module failed with error -16" Such messages are not necessary, so suppress them by returning -ENXIO instead of -EBUSY. Fixes: 6cfcd5563b4f ("clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4") Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 16132e6e91f8..92ecf1a78ec7 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -2889,7 +2889,7 @@ static int sysc_check_active_timer(struct sysc *ddata) if ((ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT) && (ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE)) - return -EBUSY; + return -ENXIO; return 0; } -- cgit v1.2.3