From 66d204a16c94f24ad08290a7663ab67e7fc04e82 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 12 Oct 2020 11:55:24 +0100 Subject: btrfs: fix readahead hang and use-after-free after removing a device Very sporadically I had test case btrfs/069 from fstests hanging (for years, it is not a recent regression), with the following traces in dmesg/syslog: [162301.160628] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg started [162301.181196] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0 [162301.287162] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg finished [162513.513792] INFO: task btrfs-transacti:1356167 blocked for more than 120 seconds. [162513.514318] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.514522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.514747] task:btrfs-transacti state:D stack: 0 pid:1356167 ppid: 2 flags:0x00004000 [162513.514751] Call Trace: [162513.514761] __schedule+0x5ce/0xd00 [162513.514765] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.514771] schedule+0x46/0xf0 [162513.514844] wait_current_trans+0xde/0x140 [btrfs] [162513.514850] ? finish_wait+0x90/0x90 [162513.514864] start_transaction+0x37c/0x5f0 [btrfs] [162513.514879] transaction_kthread+0xa4/0x170 [btrfs] [162513.514891] ? btrfs_cleanup_transaction+0x660/0x660 [btrfs] [162513.514894] kthread+0x153/0x170 [162513.514897] ? kthread_stop+0x2c0/0x2c0 [162513.514902] ret_from_fork+0x22/0x30 [162513.514916] INFO: task fsstress:1356184 blocked for more than 120 seconds. [162513.515192] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.515431] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.515680] task:fsstress state:D stack: 0 pid:1356184 ppid:1356177 flags:0x00004000 [162513.515682] Call Trace: [162513.515688] __schedule+0x5ce/0xd00 [162513.515691] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.515697] schedule+0x46/0xf0 [162513.515712] wait_current_trans+0xde/0x140 [btrfs] [162513.515716] ? finish_wait+0x90/0x90 [162513.515729] start_transaction+0x37c/0x5f0 [btrfs] [162513.515743] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs] [162513.515753] btrfs_sync_fs+0x61/0x1c0 [btrfs] [162513.515758] ? __ia32_sys_fdatasync+0x20/0x20 [162513.515761] iterate_supers+0x87/0xf0 [162513.515765] ksys_sync+0x60/0xb0 [162513.515768] __do_sys_sync+0xa/0x10 [162513.515771] do_syscall_64+0x33/0x80 [162513.515774] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.515781] RIP: 0033:0x7f5238f50bd7 [162513.515782] Code: Bad RIP value. [162513.515784] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2 [162513.515786] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7 [162513.515788] RDX: 00000000ffffffff RSI: 000000000daf0e74 RDI: 000000000000003a [162513.515789] RBP: 0000000000000032 R08: 000000000000000a R09: 00007f5239019be0 [162513.515791] R10: fffffffffffff24f R11: 0000000000000206 R12: 000000000000003a [162513.515792] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340 [162513.515804] INFO: task fsstress:1356185 blocked for more than 120 seconds. [162513.516064] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.516329] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.516617] task:fsstress state:D stack: 0 pid:1356185 ppid:1356177 flags:0x00000000 [162513.516620] Call Trace: [162513.516625] __schedule+0x5ce/0xd00 [162513.516628] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.516634] schedule+0x46/0xf0 [162513.516647] wait_current_trans+0xde/0x140 [btrfs] [162513.516650] ? finish_wait+0x90/0x90 [162513.516662] start_transaction+0x4d7/0x5f0 [btrfs] [162513.516679] btrfs_setxattr_trans+0x3c/0x100 [btrfs] [162513.516686] __vfs_setxattr+0x66/0x80 [162513.516691] __vfs_setxattr_noperm+0x70/0x200 [162513.516697] vfs_setxattr+0x6b/0x120 [162513.516703] setxattr+0x125/0x240 [162513.516709] ? lock_acquire+0xb1/0x480 [162513.516712] ? mnt_want_write+0x20/0x50 [162513.516721] ? rcu_read_lock_any_held+0x8e/0xb0 [162513.516723] ? preempt_count_add+0x49/0xa0 [162513.516725] ? __sb_start_write+0x19b/0x290 [162513.516727] ? preempt_count_add+0x49/0xa0 [162513.516732] path_setxattr+0xba/0xd0 [162513.516739] __x64_sys_setxattr+0x27/0x30 [162513.516741] do_syscall_64+0x33/0x80 [162513.516743] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.516745] RIP: 0033:0x7f5238f56d5a [162513.516746] Code: Bad RIP value. [162513.516748] RSP: 002b:00007fff67b97868 EFLAGS: 00000202 ORIG_RAX: 00000000000000bc [162513.516750] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f5238f56d5a [162513.516751] RDX: 000055b1fbb0d5a0 RSI: 00007fff67b978a0 RDI: 000055b1fbb0d470 [162513.516753] RBP: 000055b1fbb0d5a0 R08: 0000000000000001 R09: 00007fff67b97700 [162513.516754] R10: 0000000000000004 R11: 0000000000000202 R12: 0000000000000004 [162513.516756] R13: 0000000000000024 R14: 0000000000000001 R15: 00007fff67b978a0 [162513.516767] INFO: task fsstress:1356196 blocked for more than 120 seconds. [162513.517064] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.517365] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.517763] task:fsstress state:D stack: 0 pid:1356196 ppid:1356177 flags:0x00004000 [162513.517780] Call Trace: [162513.517786] __schedule+0x5ce/0xd00 [162513.517789] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.517796] schedule+0x46/0xf0 [162513.517810] wait_current_trans+0xde/0x140 [btrfs] [162513.517814] ? finish_wait+0x90/0x90 [162513.517829] start_transaction+0x37c/0x5f0 [btrfs] [162513.517845] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs] [162513.517857] btrfs_sync_fs+0x61/0x1c0 [btrfs] [162513.517862] ? __ia32_sys_fdatasync+0x20/0x20 [162513.517865] iterate_supers+0x87/0xf0 [162513.517869] ksys_sync+0x60/0xb0 [162513.517872] __do_sys_sync+0xa/0x10 [162513.517875] do_syscall_64+0x33/0x80 [162513.517878] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.517881] RIP: 0033:0x7f5238f50bd7 [162513.517883] Code: Bad RIP value. [162513.517885] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2 [162513.517887] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7 [162513.517889] RDX: 0000000000000000 RSI: 000000007660add2 RDI: 0000000000000053 [162513.517891] RBP: 0000000000000032 R08: 0000000000000067 R09: 00007f5239019be0 [162513.517893] R10: fffffffffffff24f R11: 0000000000000206 R12: 0000000000000053 [162513.517895] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340 [162513.517908] INFO: task fsstress:1356197 blocked for more than 120 seconds. [162513.518298] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.518672] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.519157] task:fsstress state:D stack: 0 pid:1356197 ppid:1356177 flags:0x00000000 [162513.519160] Call Trace: [162513.519165] __schedule+0x5ce/0xd00 [162513.519168] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.519174] schedule+0x46/0xf0 [162513.519190] wait_current_trans+0xde/0x140 [btrfs] [162513.519193] ? finish_wait+0x90/0x90 [162513.519206] start_transaction+0x4d7/0x5f0 [btrfs] [162513.519222] btrfs_create+0x57/0x200 [btrfs] [162513.519230] lookup_open+0x522/0x650 [162513.519246] path_openat+0x2b8/0xa50 [162513.519270] do_filp_open+0x91/0x100 [162513.519275] ? find_held_lock+0x32/0x90 [162513.519280] ? lock_acquired+0x33b/0x470 [162513.519285] ? do_raw_spin_unlock+0x4b/0xc0 [162513.519287] ? _raw_spin_unlock+0x29/0x40 [162513.519295] do_sys_openat2+0x20d/0x2d0 [162513.519300] do_sys_open+0x44/0x80 [162513.519304] do_syscall_64+0x33/0x80 [162513.519307] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.519309] RIP: 0033:0x7f5238f4a903 [162513.519310] Code: Bad RIP value. [162513.519312] RSP: 002b:00007fff67b97758 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 [162513.519314] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f5238f4a903 [162513.519316] RDX: 0000000000000000 RSI: 00000000000001b6 RDI: 000055b1fbb0d470 [162513.519317] RBP: 00007fff67b978c0 R08: 0000000000000001 R09: 0000000000000002 [162513.519319] R10: 00007fff67b974f7 R11: 0000000000000246 R12: 0000000000000013 [162513.519320] R13: 00000000000001b6 R14: 00007fff67b97906 R15: 000055b1fad1c620 [162513.519332] INFO: task btrfs:1356211 blocked for more than 120 seconds. [162513.519727] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.520115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.520508] task:btrfs state:D stack: 0 pid:1356211 ppid:1356178 flags:0x00004002 [162513.520511] Call Trace: [162513.520516] __schedule+0x5ce/0xd00 [162513.520519] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.520525] schedule+0x46/0xf0 [162513.520544] btrfs_scrub_pause+0x11f/0x180 [btrfs] [162513.520548] ? finish_wait+0x90/0x90 [162513.520562] btrfs_commit_transaction+0x45a/0xc30 [btrfs] [162513.520574] ? start_transaction+0xe0/0x5f0 [btrfs] [162513.520596] btrfs_dev_replace_finishing+0x6d8/0x711 [btrfs] [162513.520619] btrfs_dev_replace_by_ioctl.cold+0x1cc/0x1fd [btrfs] [162513.520639] btrfs_ioctl+0x2a25/0x36f0 [btrfs] [162513.520643] ? do_sigaction+0xf3/0x240 [162513.520645] ? find_held_lock+0x32/0x90 [162513.520648] ? do_sigaction+0xf3/0x240 [162513.520651] ? lock_acquired+0x33b/0x470 [162513.520655] ? _raw_spin_unlock_irq+0x24/0x50 [162513.520657] ? lockdep_hardirqs_on+0x7d/0x100 [162513.520660] ? _raw_spin_unlock_irq+0x35/0x50 [162513.520662] ? do_sigaction+0xf3/0x240 [162513.520671] ? __x64_sys_ioctl+0x83/0xb0 [162513.520672] __x64_sys_ioctl+0x83/0xb0 [162513.520677] do_syscall_64+0x33/0x80 [162513.520679] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.520681] RIP: 0033:0x7fc3cd307d87 [162513.520682] Code: Bad RIP value. [162513.520684] RSP: 002b:00007ffe30a56bb8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [162513.520686] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fc3cd307d87 [162513.520687] RDX: 00007ffe30a57a30 RSI: 00000000ca289435 RDI: 0000000000000003 [162513.520689] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [162513.520690] R10: 0000000000000008 R11: 0000000000000202 R12: 0000000000000003 [162513.520692] R13: 0000557323a212e0 R14: 00007ffe30a5a520 R15: 0000000000000001 [162513.520703] Showing all locks held in the system: [162513.520712] 1 lock held by khungtaskd/54: [162513.520713] #0: ffffffffb40a91a0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x15/0x197 [162513.520728] 1 lock held by in:imklog/596: [162513.520729] #0: ffff8f3f0d781400 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60 [162513.520782] 1 lock held by btrfs-transacti/1356167: [162513.520784] #0: ffff8f3d810cc848 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0x4a/0x170 [btrfs] [162513.520798] 1 lock held by btrfs/1356190: [162513.520800] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0x60 [162513.520805] 1 lock held by fsstress/1356184: [162513.520806] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0 [162513.520811] 3 locks held by fsstress/1356185: [162513.520812] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50 [162513.520815] #1: ffff8f3d80a650b8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: vfs_setxattr+0x50/0x120 [162513.520820] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] [162513.520833] 1 lock held by fsstress/1356196: [162513.520834] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0 [162513.520838] 3 locks held by fsstress/1356197: [162513.520839] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50 [162513.520843] #1: ffff8f3d506465e8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: path_openat+0x2a7/0xa50 [162513.520846] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] [162513.520858] 2 locks held by btrfs/1356211: [162513.520859] #0: ffff8f3d810cde30 (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.}-{3:3}, at: btrfs_dev_replace_finishing+0x52/0x711 [btrfs] [162513.520877] #1: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] This was weird because the stack traces show that a transaction commit, triggered by a device replace operation, is blocking trying to pause any running scrubs but there are no stack traces of blocked tasks doing a scrub. After poking around with drgn, I noticed there was a scrub task that was constantly running and blocking for shorts periods of time: >>> t = find_task(prog, 1356190) >>> prog.stack_trace(t) #0 __schedule+0x5ce/0xcfc #1 schedule+0x46/0xe4 #2 schedule_timeout+0x1df/0x475 #3 btrfs_reada_wait+0xda/0x132 #4 scrub_stripe+0x2a8/0x112f #5 scrub_chunk+0xcd/0x134 #6 scrub_enumerate_chunks+0x29e/0x5ee #7 btrfs_scrub_dev+0x2d5/0x91b #8 btrfs_ioctl+0x7f5/0x36e7 #9 __x64_sys_ioctl+0x83/0xb0 #10 do_syscall_64+0x33/0x77 #11 entry_SYSCALL_64+0x7c/0x156 Which corresponds to: int btrfs_reada_wait(void *handle) { struct reada_control *rc = handle; struct btrfs_fs_info *fs_info = rc->fs_info; while (atomic_read(&rc->elems)) { if (!atomic_read(&fs_info->reada_works_cnt)) reada_start_machine(fs_info); wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0, (HZ + 9) / 10); } (...) So the counter "rc->elems" was set to 1 and never decreased to 0, causing the scrub task to loop forever in that function. Then I used the following script for drgn to check the readahead requests: $ cat dump_reada.py import sys import drgn from drgn import NULL, Object, cast, container_of, execscript, \ reinterpret, sizeof from drgn.helpers.linux import * mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1" mnt = None for mnt in for_each_mount(prog, dst = mnt_path): pass if mnt is None: sys.stderr.write(f'Error: mount point {mnt_path} not found\n') sys.exit(1) fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info) def dump_re(re): nzones = re.nzones.value_() print(f're at {hex(re.value_())}') print(f'\t logical {re.logical.value_()}') print(f'\t refcnt {re.refcnt.value_()}') print(f'\t nzones {nzones}') for i in range(nzones): dev = re.zones[i].device name = dev.name.str.string_() print(f'\t\t dev id {dev.devid.value_()} name {name}') print() for _, e in radix_tree_for_each(fs_info.reada_tree): re = cast('struct reada_extent *', e) dump_re(re) $ drgn dump_reada.py re at 0xffff8f3da9d25ad8 logical 38928384 refcnt 1 nzones 1 dev id 0 name b'/dev/sdd' $ So there was one readahead extent with a single zone corresponding to the source device of that last device replace operation logged in dmesg/syslog. Also the ID of that zone's device was 0 which is a special value set in the source device of a device replace operation when the operation finishes (constant BTRFS_DEV_REPLACE_DEVID set at btrfs_dev_replace_finishing()), confirming again that device /dev/sdd was the source of a device replace operation. Normally there should be as many zones in the readahead extent as there are devices, and I wasn't expecting the extent to be in a block group with a 'single' profile, so I went and confirmed with the following drgn script that there weren't any single profile block groups: $ cat dump_block_groups.py import sys import drgn from drgn import NULL, Object, cast, container_of, execscript, \ reinterpret, sizeof from drgn.helpers.linux import * mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1" mnt = None for mnt in for_each_mount(prog, dst = mnt_path): pass if mnt is None: sys.stderr.write(f'Error: mount point {mnt_path} not found\n') sys.exit(1) fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info) BTRFS_BLOCK_GROUP_DATA = (1 << 0) BTRFS_BLOCK_GROUP_SYSTEM = (1 << 1) BTRFS_BLOCK_GROUP_METADATA = (1 << 2) BTRFS_BLOCK_GROUP_RAID0 = (1 << 3) BTRFS_BLOCK_GROUP_RAID1 = (1 << 4) BTRFS_BLOCK_GROUP_DUP = (1 << 5) BTRFS_BLOCK_GROUP_RAID10 = (1 << 6) BTRFS_BLOCK_GROUP_RAID5 = (1 << 7) BTRFS_BLOCK_GROUP_RAID6 = (1 << 8) BTRFS_BLOCK_GROUP_RAID1C3 = (1 << 9) BTRFS_BLOCK_GROUP_RAID1C4 = (1 << 10) def bg_flags_string(bg): flags = bg.flags.value_() ret = '' if flags & BTRFS_BLOCK_GROUP_DATA: ret = 'data' if flags & BTRFS_BLOCK_GROUP_METADATA: if len(ret) > 0: ret += '|' ret += 'meta' if flags & BTRFS_BLOCK_GROUP_SYSTEM: if len(ret) > 0: ret += '|' ret += 'system' if flags & BTRFS_BLOCK_GROUP_RAID0: ret += ' raid0' elif flags & BTRFS_BLOCK_GROUP_RAID1: ret += ' raid1' elif flags & BTRFS_BLOCK_GROUP_DUP: ret += ' dup' elif flags & BTRFS_BLOCK_GROUP_RAID10: ret += ' raid10' elif flags & BTRFS_BLOCK_GROUP_RAID5: ret += ' raid5' elif flags & BTRFS_BLOCK_GROUP_RAID6: ret += ' raid6' elif flags & BTRFS_BLOCK_GROUP_RAID1C3: ret += ' raid1c3' elif flags & BTRFS_BLOCK_GROUP_RAID1C4: ret += ' raid1c4' else: ret += ' single' return ret def dump_bg(bg): print() print(f'block group at {hex(bg.value_())}') print(f'\t start {bg.start.value_()} length {bg.length.value_()}') print(f'\t flags {bg.flags.value_()} - {bg_flags_string(bg)}') bg_root = fs_info.block_group_cache_tree.address_of_() for bg in rbtree_inorder_for_each_entry('struct btrfs_block_group', bg_root, 'cache_node'): dump_bg(bg) $ drgn dump_block_groups.py block group at 0xffff8f3d673b0400 start 22020096 length 16777216 flags 258 - system raid6 block group at 0xffff8f3d53ddb400 start 38797312 length 536870912 flags 260 - meta raid6 block group at 0xffff8f3d5f4d9c00 start 575668224 length 2147483648 flags 257 - data raid6 block group at 0xffff8f3d08189000 start 2723151872 length 67108864 flags 258 - system raid6 block group at 0xffff8f3db70ff000 start 2790260736 length 1073741824 flags 260 - meta raid6 block group at 0xffff8f3d5f4dd800 start 3864002560 length 67108864 flags 258 - system raid6 block group at 0xffff8f3d67037000 start 3931111424 length 2147483648 flags 257 - data raid6 $ So there were only 2 reasons left for having a readahead extent with a single zone: reada_find_zone(), called when creating a readahead extent, returned NULL either because we failed to find the corresponding block group or because a memory allocation failed. With some additional and custom tracing I figured out that on every further ocurrence of the problem the block group had just been deleted when we were looping to create the zones for the readahead extent (at reada_find_extent()), so we ended up with only one zone in the readahead extent, corresponding to a device that ends up getting replaced. So after figuring that out it became obvious why the hang happens: 1) Task A starts a scrub on any device of the filesystem, except for device /dev/sdd; 2) Task B starts a device replace with /dev/sdd as the source device; 3) Task A calls btrfs_reada_add() from scrub_stripe() and it is currently starting to scrub a stripe from block group X. This call to btrfs_reada_add() is the one for the extent tree. When btrfs_reada_add() calls reada_add_block(), it passes the logical address of the extent tree's root node as its 'logical' argument - a value of 38928384; 4) Task A then enters reada_find_extent(), called from reada_add_block(). It finds there isn't any existing readahead extent for the logical address 38928384, so it proceeds to the path of creating a new one. It calls btrfs_map_block() to find out which stripes exist for the block group X. On the first iteration of the for loop that iterates over the stripes, it finds the stripe for device /dev/sdd, so it creates one zone for that device and adds it to the readahead extent. Before getting into the second iteration of the loop, the cleanup kthread deletes block group X because it was empty. So in the iterations for the remaining stripes it does not add more zones to the readahead extent, because the calls to reada_find_zone() returned NULL because they couldn't find block group X anymore. As a result the new readahead extent has a single zone, corresponding to the device /dev/sdd; 4) Before task A returns to btrfs_reada_add() and queues the readahead job for the readahead work queue, task B finishes the device replace and at btrfs_dev_replace_finishing() swaps the device /dev/sdd with the new device /dev/sdg; 5) Task A returns to reada_add_block(), which increments the counter "->elems" of the reada_control structure allocated at btrfs_reada_add(). Then it returns back to btrfs_reada_add() and calls reada_start_machine(). This queues a job in the readahead work queue to run the function reada_start_machine_worker(), which calls __reada_start_machine(). At __reada_start_machine() we take the device list mutex and for each device found in the current device list, we call reada_start_machine_dev() to start the readahead work. However at this point the device /dev/sdd was already freed and is not in the device list anymore. This means the corresponding readahead for the extent at 38928384 is never started, and therefore the "->elems" counter of the reada_control structure allocated at btrfs_reada_add() never goes down to 0, causing the call to btrfs_reada_wait(), done by the scrub task, to wait forever. Note that the readahead request can be made either after the device replace started or before it started, however in pratice it is very unlikely that a device replace is able to start after a readahead request is made and is able to complete before the readahead request completes - maybe only on a very small and nearly empty filesystem. This hang however is not the only problem we can have with readahead and device removals. When the readahead extent has other zones other than the one corresponding to the device that is being removed (either by a device replace or a device remove operation), we risk having a use-after-free on the device when dropping the last reference of the readahead extent. For example if we create a readahead extent with two zones, one for the device /dev/sdd and one for the device /dev/sde: 1) Before the readahead worker starts, the device /dev/sdd is removed, and the corresponding btrfs_device structure is freed. However the readahead extent still has the zone pointing to the device structure; 2) When the readahead worker starts, it only finds device /dev/sde in the current device list of the filesystem; 3) It starts the readahead work, at reada_start_machine_dev(), using the device /dev/sde; 4) Then when it finishes reading the extent from device /dev/sde, it calls __readahead_hook() which ends up dropping the last reference on the readahead extent through the last call to reada_extent_put(); 5) At reada_extent_put() it iterates over each zone of the readahead extent and attempts to delete an element from the device's 'reada_extents' radix tree, resulting in a use-after-free, as the device pointer of the zone for /dev/sdd is now stale. We can also access the device after dropping the last reference of a zone, through reada_zone_release(), also called by reada_extent_put(). And a device remove suffers the same problem, however since it shrinks the device size down to zero before removing the device, it is very unlikely to still have readahead requests not completed by the time we free the device, the only possibility is if the device has a very little space allocated. While the hang problem is exclusive to scrub, since it is currently the only user of btrfs_reada_add() and btrfs_reada_wait(), the use-after-free problem affects any path that triggers readhead, which includes btree_readahead_hook() and __readahead_hook() (a readahead worker can trigger readahed for the children of a node) for example - any path that ends up calling reada_add_block() can trigger the use-after-free after a device is removed. So fix this by waiting for any readahead requests for a device to complete before removing a device, ensuring that while waiting for existing ones no new ones can be made. This problem has been around for a very long time - the readahead code was added in 2011, device remove exists since 2008 and device replace was introduced in 2013, hard to pick a specific commit for a git Fixes tag. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/dev-replace.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'fs/btrfs/dev-replace.c') diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c index 4a0243cb9d97..5b9e3f3ace22 100644 --- a/fs/btrfs/dev-replace.c +++ b/fs/btrfs/dev-replace.c @@ -688,6 +688,9 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info, } btrfs_wait_ordered_roots(fs_info, U64_MAX, 0, (u64)-1); + if (!scrub_ret) + btrfs_reada_remove_dev(src_device); + /* * We have to use this loop approach because at this point src_device * has to be available for transaction commit to complete, yet new @@ -696,6 +699,7 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info, while (1) { trans = btrfs_start_transaction(root, 0); if (IS_ERR(trans)) { + btrfs_reada_undo_remove_dev(src_device); mutex_unlock(&dev_replace->lock_finishing_cancel_unmount); return PTR_ERR(trans); } @@ -746,6 +750,7 @@ error: up_write(&dev_replace->rwsem); mutex_unlock(&fs_info->chunk_mutex); mutex_unlock(&fs_info->fs_devices->device_list_mutex); + btrfs_reada_undo_remove_dev(src_device); btrfs_rm_dev_replace_blocked(fs_info); if (tgt_device) btrfs_destroy_dev_replace_tgtdev(tgt_device); -- cgit v1.2.3 From cf89af146b7e62af55470cf5f3ec3c56ec144a5e Mon Sep 17 00:00:00 2001 From: Anand Jain Date: Fri, 30 Oct 2020 06:53:56 +0800 Subject: btrfs: dev-replace: fail mount if we don't have replace item with target device If there is a device BTRFS_DEV_REPLACE_DEVID without the device replace item, then it means the filesystem is inconsistent state. This is either corruption or a crafted image. Fail the mount as this needs a closer look what is actually wrong. As of now if BTRFS_DEV_REPLACE_DEVID is present without the replace item, in __btrfs_free_extra_devids() we determine that there is an extra device, and free those extra devices but continue to mount the device. However, we were wrong in keeping tack of the rw_devices so the syzbot testcase failed: WARNING: CPU: 1 PID: 3612 at fs/btrfs/volumes.c:1166 close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3612 Comm: syz-executor.2 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 panic+0x347/0x7c0 kernel/panic.c:231 __warn.cold+0x20/0x46 kernel/panic.c:600 report_bug+0x1bd/0x210 lib/bug.c:198 handle_bug+0x38/0x90 arch/x86/kernel/traps.c:234 exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254 asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536 RIP: 0010:close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166 RSP: 0018:ffffc900091777e0 EFLAGS: 00010246 RAX: 0000000000040000 RBX: ffffffffffffffff RCX: ffffc9000c8b7000 RDX: 0000000000040000 RSI: ffffffff83097f47 RDI: 0000000000000007 RBP: dffffc0000000000 R08: 0000000000000001 R09: ffff8880988a187f R10: 0000000000000000 R11: 0000000000000001 R12: ffff88809593a130 R13: ffff88809593a1ec R14: ffff8880988a1908 R15: ffff88809593a050 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 open_ctree+0x4984/0x4a2d fs/btrfs/disk-io.c:3434 btrfs_fill_super fs/btrfs/super.c:1316 [inline] btrfs_mount_root.cold+0x14/0x165 fs/btrfs/super.c:1672 The fix here is, when we determine that there isn't a replace item then fail the mount if there is a replace target device (devid 0). CC: stable@vger.kernel.org # 4.19+ Reported-by: syzbot+4cfe71a4da060be47502@syzkaller.appspotmail.com Signed-off-by: Anand Jain Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/dev-replace.c | 26 ++++++++++++++++++++++++-- fs/btrfs/volumes.c | 26 +++++++------------------- 2 files changed, 31 insertions(+), 21 deletions(-) (limited to 'fs/btrfs/dev-replace.c') diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c index 5b9e3f3ace22..10638537b9ef 100644 --- a/fs/btrfs/dev-replace.c +++ b/fs/btrfs/dev-replace.c @@ -91,6 +91,17 @@ int btrfs_init_dev_replace(struct btrfs_fs_info *fs_info) ret = btrfs_search_slot(NULL, dev_root, &key, path, 0, 0); if (ret) { no_valid_dev_replace_entry_found: + /* + * We don't have a replace item or it's corrupted. If there is + * a replace target, fail the mount. + */ + if (btrfs_find_device(fs_info->fs_devices, + BTRFS_DEV_REPLACE_DEVID, NULL, NULL, false)) { + btrfs_err(fs_info, + "found replace target device without a valid replace item"); + ret = -EUCLEAN; + goto out; + } ret = 0; dev_replace->replace_state = BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED; @@ -143,8 +154,19 @@ no_valid_dev_replace_entry_found: case BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED: case BTRFS_IOCTL_DEV_REPLACE_STATE_FINISHED: case BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED: - dev_replace->srcdev = NULL; - dev_replace->tgtdev = NULL; + /* + * We don't have an active replace item but if there is a + * replace target, fail the mount. + */ + if (btrfs_find_device(fs_info->fs_devices, + BTRFS_DEV_REPLACE_DEVID, NULL, NULL, false)) { + btrfs_err(fs_info, + "replace devid present without an active replace item"); + ret = -EUCLEAN; + } else { + dev_replace->srcdev = NULL; + dev_replace->tgtdev = NULL; + } break; case BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED: case BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED: diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index b1e48078c318..a6406b3b8c2b 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1056,22 +1056,13 @@ static void __btrfs_free_extra_devids(struct btrfs_fs_devices *fs_devices, continue; } - if (device->devid == BTRFS_DEV_REPLACE_DEVID) { - /* - * In the first step, keep the device which has - * the correct fsid and the devid that is used - * for the dev_replace procedure. - * In the second step, the dev_replace state is - * read from the device tree and it is known - * whether the procedure is really active or - * not, which means whether this device is - * used or whether it should be removed. - */ - if (step == 0 || test_bit(BTRFS_DEV_STATE_REPLACE_TGT, - &device->dev_state)) { - continue; - } - } + /* + * We have already validated the presence of BTRFS_DEV_REPLACE_DEVID, + * in btrfs_init_dev_replace() so just continue. + */ + if (device->devid == BTRFS_DEV_REPLACE_DEVID) + continue; + if (device->bdev) { blkdev_put(device->bdev, device->mode); device->bdev = NULL; @@ -1080,9 +1071,6 @@ static void __btrfs_free_extra_devids(struct btrfs_fs_devices *fs_devices, if (test_bit(BTRFS_DEV_STATE_WRITEABLE, &device->dev_state)) { list_del_init(&device->dev_alloc_list); clear_bit(BTRFS_DEV_STATE_WRITEABLE, &device->dev_state); - if (!test_bit(BTRFS_DEV_STATE_REPLACE_TGT, - &device->dev_state)) - fs_devices->rw_devices--; } list_del_init(&device->dev_list); fs_devices->num_devices--; -- cgit v1.2.3