From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- include/linux/amifdreg.h | 81 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 include/linux/amifdreg.h (limited to 'include/linux/amifdreg.h') diff --git a/include/linux/amifdreg.h b/include/linux/amifdreg.h new file mode 100644 index 000000000000..76188bf48d3b --- /dev/null +++ b/include/linux/amifdreg.h @@ -0,0 +1,81 @@ +#ifndef _LINUX_AMIFDREG_H +#define _LINUX_AMIFDREG_H + +/* +** CIAAPRA bits (read only) +*/ + +#define DSKRDY (0x1<<5) /* disk ready when low */ +#define DSKTRACK0 (0x1<<4) /* head at track zero when low */ +#define DSKPROT (0x1<<3) /* disk protected when low */ +#define DSKCHANGE (0x1<<2) /* low when disk removed */ + +/* +** CIAAPRB bits (read/write) +*/ + +#define DSKMOTOR (0x1<<7) /* motor on when low */ +#define DSKSEL3 (0x1<<6) /* select drive 3 when low */ +#define DSKSEL2 (0x1<<5) /* select drive 2 when low */ +#define DSKSEL1 (0x1<<4) /* select drive 1 when low */ +#define DSKSEL0 (0x1<<3) /* select drive 0 when low */ +#define DSKSIDE (0x1<<2) /* side selection: 0 = upper, 1 = lower */ +#define DSKDIREC (0x1<<1) /* step direction: 0=in, 1=out (to trk 0) */ +#define DSKSTEP (0x1) /* pulse low to step head 1 track */ + +/* +** DSKBYTR bits (read only) +*/ + +#define DSKBYT (1<<15) /* register contains valid byte when set */ +#define DMAON (1<<14) /* disk DMA enabled */ +#define DISKWRITE (1<<13) /* disk write bit in DSKLEN enabled */ +#define WORDEQUAL (1<<12) /* DSKSYNC register match when true */ +/* bits 7-0 are data */ + +/* +** ADKCON/ADKCONR bits +*/ + +#ifndef SETCLR +#define ADK_SETCLR (1<<15) /* control bit */ +#endif +#define ADK_PRECOMP1 (1<<14) /* precompensation selection */ +#define ADK_PRECOMP0 (1<<13) /* 00=none, 01=140ns, 10=280ns, 11=500ns */ +#define ADK_MFMPREC (1<<12) /* 0=GCR precomp., 1=MFM precomp. */ +#define ADK_WORDSYNC (1<<10) /* enable DSKSYNC auto DMA */ +#define ADK_MSBSYNC (1<<9) /* when 1, enable sync on MSbit (for GCR) */ +#define ADK_FAST (1<<8) /* bit cell: 0=2us (GCR), 1=1us (MFM) */ + +/* +** DSKLEN bits +*/ + +#define DSKLEN_DMAEN (1<<15) +#define DSKLEN_WRITE (1<<14) + +/* +** INTENA/INTREQ bits +*/ + +#define DSKINDEX (0x1<<4) /* DSKINDEX bit */ + +/* +** Misc +*/ + +#define MFM_SYNC 0x4489 /* standard MFM sync value */ + +/* Values for FD_COMMAND */ +#define FD_RECALIBRATE 0x07 /* move to track 0 */ +#define FD_SEEK 0x0F /* seek track */ +#define FD_READ 0xE6 /* read with MT, MFM, SKip deleted */ +#define FD_WRITE 0xC5 /* write with MT, MFM */ +#define FD_SENSEI 0x08 /* Sense Interrupt Status */ +#define FD_SPECIFY 0x03 /* specify HUT etc */ +#define FD_FORMAT 0x4D /* format one track */ +#define FD_VERSION 0x10 /* get version code */ +#define FD_CONFIGURE 0x13 /* configure FIFO operation */ +#define FD_PERPENDICULAR 0x12 /* perpendicular r/w mode */ + +#endif /* _LINUX_AMIFDREG_H */ -- cgit v1.2.3