From a7ffac9591a2a0ee74c431396ae475a8d0caa51e Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Wed, 8 Dec 2010 13:59:24 +0900 Subject: cfg80211: Add antenna availability information Add a field to wiphy for the hardware to report the availble antennas for configuration. Only if this is set to something bigger than zero, will the anntenna configuration ops be executed. Allthough this could be a simple number of antennas, I defined it as a bitmap of antennas which are available for configuration, since it's more consistent with the rest of the antenna API and there could be cases where the hardware allows only configuration of certain antennas. As it does not make much of a difference in size or normal usage, I think it's better to be able to support this, in case the need arises. The antenna configuration is now also checked against the availabe antennas and rejected if it does not match. Signed-off-by: Bruno Randolf -- v3: always apply available antenna mask (for "all" antennas case). v2: reject antenna configurations which don't match the available antennas Signed-off-by: John W. Linville --- include/net/cfg80211.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 0d5979924be3..4d5acb013636 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1468,6 +1468,9 @@ struct ieee80211_txrx_stypes { * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or * transmitted through nl80211, points to an array indexed by interface * type + * + * @available_antennas: bitmap of antennas which are available to configure. + * antenna configuration commands will be rejected unless this is set. */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -1507,6 +1510,8 @@ struct wiphy { u8 max_num_pmkids; + u32 available_antennas; + /* If multiple wiphys are registered and you're handed e.g. * a regular netdev with assigned ieee80211_ptr, you won't * know whether it points to a wiphy your driver has registered -- cgit v1.2.3 From dbd2fd656f2060abfd3a16257f8b51ec60f6d2ed Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 9 Dec 2010 19:58:59 +0100 Subject: cfg80211/nl80211: separate unicast/multicast default TX keys Allow userspace to specify that a given key is default only for unicast and/or multicast transmissions. Only WEP keys are for both, WPA/RSN keys set here are GTKs for multicast only. For more future flexibility, allow to specify all combiations. Wireless extensions can only set both so use nl80211; WEP keys (connect keys) must be set as default for both (but 802.1X WEP is still possible). Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwmc3200wifi/cfg80211.c | 3 +- drivers/net/wireless/libertas/cfg.c | 3 +- drivers/net/wireless/rndis_wlan.c | 4 +- include/linux/nl80211.h | 27 ++++++ include/net/cfg80211.h | 5 +- net/mac80211/cfg.c | 3 +- net/wireless/nl80211.c | 125 +++++++++++++++++++++++---- net/wireless/util.c | 3 +- net/wireless/wext-compat.c | 8 +- 9 files changed, 152 insertions(+), 29 deletions(-) (limited to 'include/net') diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.c b/drivers/net/wireless/iwmc3200wifi/cfg80211.c index c6c0eff9b5ed..5a4982271e96 100644 --- a/drivers/net/wireless/iwmc3200wifi/cfg80211.c +++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.c @@ -225,7 +225,8 @@ static int iwm_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev, static int iwm_cfg80211_set_default_key(struct wiphy *wiphy, struct net_device *ndev, - u8 key_index) + u8 key_index, bool unicast, + bool multicast) { struct iwm_priv *iwm = ndev_to_iwm(ndev); diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index dee32d3681a5..300be1931826 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -1422,7 +1422,8 @@ static int lbs_cfg_disconnect(struct wiphy *wiphy, struct net_device *dev, static int lbs_cfg_set_default_key(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index) + u8 key_index, bool unicast, + bool multicast) { struct lbs_private *priv = wiphy_priv(wiphy); diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 19f3d568f700..4a4f00591447 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -554,7 +554,7 @@ static int rndis_del_key(struct wiphy *wiphy, struct net_device *netdev, u8 key_index, bool pairwise, const u8 *mac_addr); static int rndis_set_default_key(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index); + u8 key_index, bool unicast, bool multicast); static int rndis_get_station(struct wiphy *wiphy, struct net_device *dev, u8 *mac, struct station_info *sinfo); @@ -2381,7 +2381,7 @@ static int rndis_del_key(struct wiphy *wiphy, struct net_device *netdev, } static int rndis_set_default_key(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index) + u8 key_index, bool unicast, bool multicast) { struct rndis_wlan_private *priv = wiphy_priv(wiphy); struct usbnet *usbdev = priv->usbdev; diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 380421253d16..b8fa25d741ba 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -851,6 +851,10 @@ enum nl80211_commands { * * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16) * + * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags + * attributes, specifying what a key should be set as default as. + * See &enum nl80211_key_default_types. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1029,6 +1033,8 @@ enum nl80211_attrs { NL80211_ATTR_BSS_HT_OPMODE, + NL80211_ATTR_KEY_DEFAULT_TYPES, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1774,6 +1780,23 @@ enum nl80211_wpa_versions { NL80211_WPA_VERSION_2 = 1 << 1, }; +/** + * enum nl80211_key_default_types - key default types + * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid + * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default + * unicast key + * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default + * multicast key + * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types + */ +enum nl80211_key_default_types { + __NL80211_KEY_DEFAULT_TYPE_INVALID, + NL80211_KEY_DEFAULT_TYPE_UNICAST, + NL80211_KEY_DEFAULT_TYPE_MULTICAST, + + NUM_NL80211_KEY_DEFAULT_TYPES +}; + /** * enum nl80211_key_attributes - key attributes * @__NL80211_KEY_INVALID: invalid @@ -1790,6 +1813,9 @@ enum nl80211_wpa_versions { * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not * specified the default depends on whether a MAC address was * given with the command using the key or not (u32) + * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags + * attributes, specifying what a key should be set as default as. + * See &enum nl80211_key_default_types. * @__NL80211_KEY_AFTER_LAST: internal * @NL80211_KEY_MAX: highest key attribute */ @@ -1802,6 +1828,7 @@ enum nl80211_key_attributes { NL80211_KEY_DEFAULT, NL80211_KEY_DEFAULT_MGMT, NL80211_KEY_TYPE, + NL80211_KEY_DEFAULT_TYPES, /* keep last */ __NL80211_KEY_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 4d5acb013636..22be7c625b70 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1211,7 +1211,7 @@ struct cfg80211_ops { u8 key_index, bool pairwise, const u8 *mac_addr); int (*set_default_key)(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index); + u8 key_index, bool unicast, bool multicast); int (*set_default_mgmt_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index); @@ -1393,6 +1393,8 @@ struct cfg80211_ops { * control port protocol ethertype. The device also honours the * control_port_no_encrypt flag. * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN. + * @WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS: The device supports separate + * unicast and multicast TX keys. */ enum wiphy_flags { WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), @@ -1404,6 +1406,7 @@ enum wiphy_flags { WIPHY_FLAG_4ADDR_STATION = BIT(6), WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7), WIPHY_FLAG_IBSS_RSN = BIT(8), + WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS= BIT(9), }; struct mac_address { diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index c30b8b72eedb..12f7dc048d34 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -295,7 +295,8 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_config_default_key(struct wiphy *wiphy, struct net_device *dev, - u8 key_idx) + u8 key_idx, bool uni, + bool multi) { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 73a7f6d354c9..53f044370cde 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -171,6 +171,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_WIPHY_ANTENNA_RX] = { .type = NLA_U32 }, [NL80211_ATTR_MCAST_RATE] = { .type = NLA_U32 }, [NL80211_ATTR_OFFCHANNEL_TX_OK] = { .type = NLA_FLAG }, + [NL80211_ATTR_KEY_DEFAULT_TYPES] = { .type = NLA_NESTED }, }; /* policy for the key attributes */ @@ -182,6 +183,14 @@ static const struct nla_policy nl80211_key_policy[NL80211_KEY_MAX + 1] = { [NL80211_KEY_DEFAULT] = { .type = NLA_FLAG }, [NL80211_KEY_DEFAULT_MGMT] = { .type = NLA_FLAG }, [NL80211_KEY_TYPE] = { .type = NLA_U32 }, + [NL80211_KEY_DEFAULT_TYPES] = { .type = NLA_NESTED }, +}; + +/* policy for the key default flags */ +static const struct nla_policy +nl80211_key_default_policy[NUM_NL80211_KEY_DEFAULT_TYPES] = { + [NL80211_KEY_DEFAULT_TYPE_UNICAST] = { .type = NLA_FLAG }, + [NL80211_KEY_DEFAULT_TYPE_MULTICAST] = { .type = NLA_FLAG }, }; /* ifidx get helper */ @@ -314,6 +323,7 @@ struct key_parse { int idx; int type; bool def, defmgmt; + bool def_uni, def_multi; }; static int nl80211_parse_key_new(struct nlattr *key, struct key_parse *k) @@ -327,6 +337,13 @@ static int nl80211_parse_key_new(struct nlattr *key, struct key_parse *k) k->def = !!tb[NL80211_KEY_DEFAULT]; k->defmgmt = !!tb[NL80211_KEY_DEFAULT_MGMT]; + if (k->def) { + k->def_uni = true; + k->def_multi = true; + } + if (k->defmgmt) + k->def_multi = true; + if (tb[NL80211_KEY_IDX]) k->idx = nla_get_u8(tb[NL80211_KEY_IDX]); @@ -349,6 +366,19 @@ static int nl80211_parse_key_new(struct nlattr *key, struct key_parse *k) return -EINVAL; } + if (tb[NL80211_KEY_DEFAULT_TYPES]) { + struct nlattr *kdt[NUM_NL80211_KEY_DEFAULT_TYPES]; + int err = nla_parse_nested(kdt, + NUM_NL80211_KEY_DEFAULT_TYPES - 1, + tb[NL80211_KEY_DEFAULT_TYPES], + nl80211_key_default_policy); + if (err) + return err; + + k->def_uni = kdt[NL80211_KEY_DEFAULT_TYPE_UNICAST]; + k->def_multi = kdt[NL80211_KEY_DEFAULT_TYPE_MULTICAST]; + } + return 0; } @@ -373,12 +403,32 @@ static int nl80211_parse_key_old(struct genl_info *info, struct key_parse *k) k->def = !!info->attrs[NL80211_ATTR_KEY_DEFAULT]; k->defmgmt = !!info->attrs[NL80211_ATTR_KEY_DEFAULT_MGMT]; + if (k->def) { + k->def_uni = true; + k->def_multi = true; + } + if (k->defmgmt) + k->def_multi = true; + if (info->attrs[NL80211_ATTR_KEY_TYPE]) { k->type = nla_get_u32(info->attrs[NL80211_ATTR_KEY_TYPE]); if (k->type < 0 || k->type >= NUM_NL80211_KEYTYPES) return -EINVAL; } + if (info->attrs[NL80211_ATTR_KEY_DEFAULT_TYPES]) { + struct nlattr *kdt[NUM_NL80211_KEY_DEFAULT_TYPES]; + int err = nla_parse_nested( + kdt, NUM_NL80211_KEY_DEFAULT_TYPES - 1, + info->attrs[NL80211_ATTR_KEY_DEFAULT_TYPES], + nl80211_key_default_policy); + if (err) + return err; + + k->def_uni = kdt[NL80211_KEY_DEFAULT_TYPE_UNICAST]; + k->def_multi = kdt[NL80211_KEY_DEFAULT_TYPE_MULTICAST]; + } + return 0; } @@ -401,6 +451,11 @@ static int nl80211_parse_key(struct genl_info *info, struct key_parse *k) if (k->def && k->defmgmt) return -EINVAL; + if (k->defmgmt) { + if (k->def_uni || !k->def_multi) + return -EINVAL; + } + if (k->idx != -1) { if (k->defmgmt) { if (k->idx < 4 || k->idx > 5) @@ -450,6 +505,8 @@ nl80211_parse_connkeys(struct cfg80211_registered_device *rdev, goto error; def = 1; result->def = parse.idx; + if (!parse.def_uni || !parse.def_multi) + goto error; } else if (parse.defmgmt) goto error; err = cfg80211_validate_key_settings(rdev, &parse.p, @@ -1586,8 +1643,6 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info) struct key_parse key; int err; struct net_device *dev = info->user_ptr[1]; - int (*func)(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index); err = nl80211_parse_key(info, &key); if (err) @@ -1600,27 +1655,61 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info) if (!key.def && !key.defmgmt) return -EINVAL; - if (key.def) - func = rdev->ops->set_default_key; - else - func = rdev->ops->set_default_mgmt_key; + wdev_lock(dev->ieee80211_ptr); - if (!func) - return -EOPNOTSUPP; + if (key.def) { + if (!rdev->ops->set_default_key) { + err = -EOPNOTSUPP; + goto out; + } - wdev_lock(dev->ieee80211_ptr); - err = nl80211_key_allowed(dev->ieee80211_ptr); - if (!err) - err = func(&rdev->wiphy, dev, key.idx); + err = nl80211_key_allowed(dev->ieee80211_ptr); + if (err) + goto out; + + if (!(rdev->wiphy.flags & + WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS)) { + if (!key.def_uni || !key.def_multi) { + err = -EOPNOTSUPP; + goto out; + } + } + + err = rdev->ops->set_default_key(&rdev->wiphy, dev, key.idx, + key.def_uni, key.def_multi); + + if (err) + goto out; #ifdef CONFIG_CFG80211_WEXT - if (!err) { - if (func == rdev->ops->set_default_key) - dev->ieee80211_ptr->wext.default_key = key.idx; - else - dev->ieee80211_ptr->wext.default_mgmt_key = key.idx; - } + dev->ieee80211_ptr->wext.default_key = key.idx; +#endif + } else { + if (key.def_uni || !key.def_multi) { + err = -EINVAL; + goto out; + } + + if (!rdev->ops->set_default_mgmt_key) { + err = -EOPNOTSUPP; + goto out; + } + + err = nl80211_key_allowed(dev->ieee80211_ptr); + if (err) + goto out; + + err = rdev->ops->set_default_mgmt_key(&rdev->wiphy, + dev, key.idx); + if (err) + goto out; + +#ifdef CONFIG_CFG80211_WEXT + dev->ieee80211_ptr->wext.default_mgmt_key = key.idx; #endif + } + + out: wdev_unlock(dev->ieee80211_ptr); return err; diff --git a/net/wireless/util.c b/net/wireless/util.c index 4de624ca4c63..7620ae2fcf18 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -689,7 +689,8 @@ void cfg80211_upload_connect_keys(struct wireless_dev *wdev) continue; } if (wdev->connect_keys->def == i) - if (rdev->ops->set_default_key(wdev->wiphy, dev, i)) { + if (rdev->ops->set_default_key(wdev->wiphy, dev, + i, true, true)) { netdev_err(dev, "failed to set defkey %d\n", i); continue; } diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index 12222ee6ebf2..3e5dbd4e4cd5 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -548,8 +548,8 @@ static int __cfg80211_set_encryption(struct cfg80211_registered_device *rdev, __cfg80211_leave_ibss(rdev, wdev->netdev, true); rejoin = true; } - err = rdev->ops->set_default_key(&rdev->wiphy, - dev, idx); + err = rdev->ops->set_default_key(&rdev->wiphy, dev, + idx, true, true); } if (!err) { wdev->wext.default_key = idx; @@ -627,8 +627,8 @@ int cfg80211_wext_siwencode(struct net_device *dev, err = 0; wdev_lock(wdev); if (wdev->current_bss) - err = rdev->ops->set_default_key(&rdev->wiphy, - dev, idx); + err = rdev->ops->set_default_key(&rdev->wiphy, dev, + idx, true, true); if (!err) wdev->wext.default_key = idx; wdev_unlock(wdev); -- cgit v1.2.3 From a293911d4fd5e8593dbf478399a77f990d466269 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 14 Dec 2010 17:54:28 +0100 Subject: nl80211: advertise maximum remain-on-channel duration With the upcoming hardware offload implementation, some devices will have a different maximum duration for the remain-on-channel command. Advertise the maximum duration in mac80211, and make mac80211 set it. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 5 +++++ include/net/cfg80211.h | 5 +++++ net/mac80211/main.c | 2 ++ net/wireless/nl80211.c | 7 ++++++- 4 files changed, 18 insertions(+), 1 deletion(-) (limited to 'include/net') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index b8fa25d741ba..1cee56b3a79a 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -773,6 +773,9 @@ enum nl80211_commands { * cache, a wiphy attribute. * * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. + * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that + * specifies the maximum duration that can be requested with the + * remain-on-channel operation, in milliseconds, u32. * * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. * @@ -1035,6 +1038,8 @@ enum nl80211_attrs { NL80211_ATTR_KEY_DEFAULT_TYPES, + NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 22be7c625b70..f45e15f12446 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1474,6 +1474,9 @@ struct ieee80211_txrx_stypes { * * @available_antennas: bitmap of antennas which are available to configure. * antenna configuration commands will be rejected unless this is set. + * + * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation + * may request, if implemented. */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -1511,6 +1514,8 @@ struct wiphy { char fw_version[ETHTOOL_BUSINFO_LEN]; u32 hw_version; + u16 max_remain_on_channel_duration; + u8 max_num_pmkids; u32 available_antennas; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index f7bdb7c78879..d87eb005690f 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -745,6 +745,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) } } + local->hw.wiphy->max_remain_on_channel_duration = 5000; + result = wiphy_register(local->hw.wiphy); if (result < 0) goto fail_wiphy_register; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 53f044370cde..594a6ac8b9d2 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -755,6 +755,10 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, nla_nest_end(msg, nl_cmds); + if (dev->ops->remain_on_channel) + NLA_PUT_U32(msg, NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, + dev->wiphy.max_remain_on_channel_duration); + /* for now at least assume all drivers have it */ if (dev->ops->mgmt_tx) NLA_PUT_FLAG(msg, NL80211_ATTR_OFFCHANNEL_TX_OK); @@ -4228,7 +4232,8 @@ static int nl80211_remain_on_channel(struct sk_buff *skb, * We should be on that channel for at least one jiffie, * and more than 5 seconds seems excessive. */ - if (!duration || !msecs_to_jiffies(duration) || duration > 5000) + if (!duration || !msecs_to_jiffies(duration) || + duration > rdev->wiphy.max_remain_on_channel_duration) return -EINVAL; if (!rdev->ops->remain_on_channel) -- cgit v1.2.3 From bd2ce6e43f65127bc723e7fcc044758cf8113260 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 15 Dec 2010 07:47:10 +0530 Subject: mac80211: Add timeout to BA session start API Allow drivers or rate control algorithms to specify BlockAck session timeout when initiating an ADDBA transaction. This is useful in cases where maintaining persistent BA sessions does not incur any overhead. The current timeout value of 5000 TUs is retained for all non ath9k/ath9k_htc drivers. Signed-off-by: Sujith Manoharan Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 2 +- drivers/net/wireless/ath/ath9k/rc.c | 2 +- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 2 +- drivers/net/wireless/rtlwifi/rc.c | 2 +- include/net/mac80211.h | 4 +++- net/mac80211/agg-tx.c | 7 +++++-- net/mac80211/debugfs_sta.c | 2 +- net/mac80211/rc80211_minstrel_ht.c | 2 +- net/mac80211/sta_info.h | 2 ++ 9 files changed, 16 insertions(+), 9 deletions(-) (limited to 'include/net') diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c index 31fad82239b3..33f36029fa4f 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c @@ -251,7 +251,7 @@ void ath9k_tx_tasklet(unsigned long data) ista = (struct ath9k_htc_sta *)sta->drv_priv; if (ath9k_htc_check_tx_aggr(priv, ista, tid)) { - ieee80211_start_tx_ba_session(sta, tid); + ieee80211_start_tx_ba_session(sta, tid, 0); spin_lock_bh(&priv->tx_lock); ista->tid_state[tid] = AGGR_PROGRESS; spin_unlock_bh(&priv->tx_lock); diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 2061a755a026..896d12986b1e 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1373,7 +1373,7 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, an = (struct ath_node *)sta->drv_priv; if(ath_tx_aggr_check(sc, an, tid)) - ieee80211_start_tx_ba_session(sta, tid); + ieee80211_start_tx_ba_session(sta, tid, 0); } } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index ee123482e1d5..5083dba122ca 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -387,7 +387,7 @@ static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, if (load > IWL_AGG_LOAD_THRESHOLD) { IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n", sta->addr, tid); - ret = ieee80211_start_tx_ba_session(sta, tid); + ret = ieee80211_start_tx_ba_session(sta, tid, 5000); if (ret == -EAGAIN) { /* * driver and mac80211 is out of sync diff --git a/drivers/net/wireless/rtlwifi/rc.c b/drivers/net/wireless/rtlwifi/rc.c index 904b8fd01f6d..91634107434a 100644 --- a/drivers/net/wireless/rtlwifi/rc.c +++ b/drivers/net/wireless/rtlwifi/rc.c @@ -169,7 +169,7 @@ static void rtl_tx_status(void *ppriv, tid = qc[0] & 0xf; if (_rtl_tx_aggr_check(rtlpriv, tid)) - ieee80211_start_tx_ba_session(sta, tid); + ieee80211_start_tx_ba_session(sta, tid, 5000); } } } diff --git a/include/net/mac80211.h b/include/net/mac80211.h index e411cf87fb41..69ded1ee49ce 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2435,6 +2435,7 @@ void ieee80211_queue_delayed_work(struct ieee80211_hw *hw, * ieee80211_start_tx_ba_session - Start a tx Block Ack session. * @sta: the station for which to start a BA session * @tid: the TID to BA on. + * @timeout: session timeout value (in TUs) * * Return: success if addBA request was sent, failure otherwise * @@ -2442,7 +2443,8 @@ void ieee80211_queue_delayed_work(struct ieee80211_hw *hw, * the need to start aggregation on a certain RA/TID, the session level * will be managed by the mac80211. */ -int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid); +int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid, + u16 timeout); /** * ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate. diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index d4679b265ba8..9cc472c6a6a5 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -342,10 +342,11 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid) /* send AddBA request */ ieee80211_send_addba_request(sdata, sta->sta.addr, tid, tid_tx->dialog_token, start_seq_num, - 0x40, 5000); + 0x40, tid_tx->timeout); } -int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid) +int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid, + u16 timeout) { struct sta_info *sta = container_of(pubsta, struct sta_info, sta); struct ieee80211_sub_if_data *sdata = sta->sdata; @@ -420,6 +421,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid) skb_queue_head_init(&tid_tx->pending); __set_bit(HT_AGG_STATE_WANT_START, &tid_tx->state); + tid_tx->timeout = timeout; + /* Tx timer */ tid_tx->addba_resp_timer.function = sta_addba_resp_timer_expired; tid_tx->addba_resp_timer.data = (unsigned long)&sta->timer_to_tid[tid]; diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 8bb5af85f469..c04a1396cf8d 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -189,7 +189,7 @@ static ssize_t sta_agg_status_write(struct file *file, const char __user *userbu if (tx) { if (start) - ret = ieee80211_start_tx_ba_session(&sta->sta, tid); + ret = ieee80211_start_tx_ba_session(&sta->sta, tid, 5000); else ret = ieee80211_stop_tx_ba_session(&sta->sta, tid); } else { diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 4ad7a362fcc1..165a4518bb48 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -374,7 +374,7 @@ minstrel_aggr_check(struct minstrel_priv *mp, struct ieee80211_sta *pubsta, stru if (skb_get_queue_mapping(skb) == IEEE80211_AC_VO) return; - ieee80211_start_tx_ba_session(pubsta, tid); + ieee80211_start_tx_ba_session(pubsta, tid, 5000); } static void diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index fdca52cf88de..bbdd2a86a94b 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -78,6 +78,7 @@ enum ieee80211_sta_info_flags { * @addba_resp_timer: timer for peer's response to addba request * @pending: pending frames queue -- use sta's spinlock to protect * @dialog_token: dialog token for aggregation session + * @timeout: session timeout value to be filled in ADDBA requests * @state: session state (see above) * @stop_initiator: initiator of a session stop * @tx_stop: TX DelBA frame when stopping @@ -96,6 +97,7 @@ struct tid_ampdu_tx { struct timer_list addba_resp_timer; struct sk_buff_head pending; unsigned long state; + u16 timeout; u8 dialog_token; u8 stop_initiator; bool tx_stop; -- cgit v1.2.3 From cf4e594ea7e55555e81647b74a3a8e8b2826a529 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 16 Dec 2010 00:52:40 +0200 Subject: nl80211: Add notification for dropped Deauth/Disassoc Add a new notification to indicate that a received, unprotected Deauthentication or Disassociation frame was dropped due to management frame protection being in use. This notification is needed to allow user space (e.g., wpa_supplicant) to implement SA Query procedure to recover from association state mismatch between an AP and STA. This is needed to avoid getting stuck in non-working state when MFP (IEEE 802.11w) is used and a protected Deauthentication or Disassociation frame is dropped for any reason. After that, the station would silently discard any unprotected Deauthentication or Disassociation frame that could be indicating that the AP does not have association for the STA (when the Reason Code would be 6 or 7). IEEE Std 802.11w-2009, 11.13 describes this recovery mechanism. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 10 ++++++++++ include/net/cfg80211.h | 26 ++++++++++++++++++++++++++ net/mac80211/rx.c | 22 ++++++++++++++++++++-- net/wireless/mlme.c | 22 ++++++++++++++++++++++ net/wireless/nl80211.c | 16 ++++++++++++++++ net/wireless/nl80211.h | 6 ++++++ 6 files changed, 100 insertions(+), 2 deletions(-) (limited to 'include/net') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 1cee56b3a79a..7483a89cee8f 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -399,6 +399,13 @@ * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the * network is determined by the network interface. * + * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame + * notification. This event is used to indicate that an unprotected + * deauthentication frame was dropped when MFP is in use. + * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame + * notification. This event is used to indicate that an unprotected + * disassociation frame was dropped when MFP is in use. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -508,6 +515,9 @@ enum nl80211_commands { NL80211_CMD_JOIN_MESH, NL80211_CMD_LEAVE_MESH, + NL80211_CMD_UNPROT_DEAUTHENTICATE, + NL80211_CMD_UNPROT_DISASSOCIATE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f45e15f12446..3d1c09b777e8 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2359,6 +2359,32 @@ void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len); void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len); +/** + * cfg80211_send_unprot_deauth - notification of unprotected deauthentication + * @dev: network device + * @buf: deauthentication frame (header + body) + * @len: length of the frame data + * + * This function is called whenever a received Deauthentication frame has been + * dropped in station mode because of MFP being used but the Deauthentication + * frame was not protected. This function may sleep. + */ +void cfg80211_send_unprot_deauth(struct net_device *dev, const u8 *buf, + size_t len); + +/** + * cfg80211_send_unprot_disassoc - notification of unprotected disassociation + * @dev: network device + * @buf: disassociation frame (header + body) + * @len: length of the frame data + * + * This function is called whenever a received Disassociation frame has been + * dropped in station mode because of MFP being used but the Disassociation + * frame was not protected. This function may sleep. + */ +void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf, + size_t len); + /** * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP) * @dev: network device diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 052789ef4745..4573ce1e1d15 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1540,12 +1540,30 @@ ieee80211_drop_unencrypted_mgmt(struct ieee80211_rx_data *rx) if (rx->sta && test_sta_flags(rx->sta, WLAN_STA_MFP)) { if (unlikely(!ieee80211_has_protected(fc) && ieee80211_is_unicast_robust_mgmt_frame(rx->skb) && - rx->key)) + rx->key)) { + if (ieee80211_is_deauth(fc)) + cfg80211_send_unprot_deauth(rx->sdata->dev, + rx->skb->data, + rx->skb->len); + else if (ieee80211_is_disassoc(fc)) + cfg80211_send_unprot_disassoc(rx->sdata->dev, + rx->skb->data, + rx->skb->len); return -EACCES; + } /* BIP does not use Protected field, so need to check MMIE */ if (unlikely(ieee80211_is_multicast_robust_mgmt_frame(rx->skb) && - ieee80211_get_mmie_keyidx(rx->skb) < 0)) + ieee80211_get_mmie_keyidx(rx->skb) < 0)) { + if (ieee80211_is_deauth(fc)) + cfg80211_send_unprot_deauth(rx->sdata->dev, + rx->skb->data, + rx->skb->len); + else if (ieee80211_is_disassoc(fc)) + cfg80211_send_unprot_disassoc(rx->sdata->dev, + rx->skb->data, + rx->skb->len); return -EACCES; + } /* * When using MFP, Action frames are not allowed prior to * having configured keys. diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index d7680f2a4c5b..aa5df8865ff7 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -263,6 +263,28 @@ void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len) } EXPORT_SYMBOL(cfg80211_send_disassoc); +void cfg80211_send_unprot_deauth(struct net_device *dev, const u8 *buf, + size_t len) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct wiphy *wiphy = wdev->wiphy; + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + + nl80211_send_unprot_deauth(rdev, dev, buf, len, GFP_ATOMIC); +} +EXPORT_SYMBOL(cfg80211_send_unprot_deauth); + +void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf, + size_t len) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct wiphy *wiphy = wdev->wiphy; + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + + nl80211_send_unprot_disassoc(rdev, dev, buf, len, GFP_ATOMIC); +} +EXPORT_SYMBOL(cfg80211_send_unprot_disassoc); + static void __cfg80211_auth_remove(struct wireless_dev *wdev, const u8 *addr) { int i; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 594a6ac8b9d2..aefce54d47e2 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -5473,6 +5473,22 @@ void nl80211_send_disassoc(struct cfg80211_registered_device *rdev, NL80211_CMD_DISASSOCIATE, gfp); } +void nl80211_send_unprot_deauth(struct cfg80211_registered_device *rdev, + struct net_device *netdev, const u8 *buf, + size_t len, gfp_t gfp) +{ + nl80211_send_mlme_event(rdev, netdev, buf, len, + NL80211_CMD_UNPROT_DEAUTHENTICATE, gfp); +} + +void nl80211_send_unprot_disassoc(struct cfg80211_registered_device *rdev, + struct net_device *netdev, const u8 *buf, + size_t len, gfp_t gfp) +{ + nl80211_send_mlme_event(rdev, netdev, buf, len, + NL80211_CMD_UNPROT_DISASSOCIATE, gfp); +} + static void nl80211_send_mlme_timeout(struct cfg80211_registered_device *rdev, struct net_device *netdev, int cmd, const u8 *addr, gfp_t gfp) diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h index 16c2f7190768..e3f7fa886966 100644 --- a/net/wireless/nl80211.h +++ b/net/wireless/nl80211.h @@ -25,6 +25,12 @@ void nl80211_send_deauth(struct cfg80211_registered_device *rdev, void nl80211_send_disassoc(struct cfg80211_registered_device *rdev, struct net_device *netdev, const u8 *buf, size_t len, gfp_t gfp); +void nl80211_send_unprot_deauth(struct cfg80211_registered_device *rdev, + struct net_device *netdev, + const u8 *buf, size_t len, gfp_t gfp); +void nl80211_send_unprot_disassoc(struct cfg80211_registered_device *rdev, + struct net_device *netdev, + const u8 *buf, size_t len, gfp_t gfp); void nl80211_send_auth_timeout(struct cfg80211_registered_device *rdev, struct net_device *netdev, const u8 *addr, gfp_t gfp); -- cgit v1.2.3 From 2784fe915cd25adf23ea28534019308d8a144721 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 15 Dec 2010 19:24:11 -0800 Subject: cfg80211: fix null pointer dereference with a custom regulatory request Once we moved the core regulatory request to the queue and let the scheduler process it last_request will have been left NULL until the schedular decides to process the first request. When this happens and we are loading a driver with a custom regulatory request like all Atheros drivers we end up with a NULL pointer dereference. We fix this by checking if the request was a custom one. BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] PGD 71f91067 PUD 712b2067 PMD 0 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1/loading CPU 0 Modules linked in: ath9k_htc(+) ath9k_common ath9k_hw ath Pid: 3094, comm: insmod Tainted: G W 2.6.37-rc5-wl #16 INVALID/28427ZQ RIP: 0010:[] [] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] RSP: 0018:ffff88007045db78 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffa047d9a0 RCX: ffff88007045dbd0 RDX: 0000000000004e20 RSI: 000000000024cde0 RDI: ffff8800700483e0 RBP: ffff88007045db98 R08: ffffffffa02f5b40 R09: 0000000000000001 R10: 000000000000000e R11: 0000000000000001 R12: 0000000000000000 R13: ffff88007004e3b0 R14: 0000000000000000 R15: ffff880070048340 FS: 00007f635a707700(0000) GS:ffff880077400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000004 CR3: 00000000708a9000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process insmod (pid: 3094, threadinfo ffff88007045c000, task ffff8800713e3ec0) Stack: ffffffffa047d9a0 0000000000000000 ffff88007004e3b0 0000000000000000 ffff88007045dc08 ffffffffa016e147 000000007045dc08 0000000000000002 ffff8800700483e0 ffffffffa02f5b40 ffff88007045dbd8 0000000000000000 Call Trace: [] wiphy_apply_custom_regulatory+0x137/0x1d0 [cfg80211] [] ? ath9k_reg_notifier+0x0/0x50 [ath9k_htc] [] ath_regd_init+0x347/0x430 [ath] [] ath9k_htc_probe_device+0x6c5/0x960 [ath9k_htc] [] ath9k_htc_hw_init+0xc/0x30 [ath9k_htc] [] ath9k_hif_usb_probe+0x216/0x3b0 [ath9k_htc] [] usb_probe_interface+0x10c/0x210 [usbcore] [] driver_probe_device+0x96/0x1c0 [] __driver_attach+0xa3/0xb0 [] ? __driver_attach+0x0/0xb0 [] bus_for_each_dev+0x5e/0x90 [] driver_attach+0x19/0x20 [] bus_add_driver+0x168/0x320 [] driver_register+0x71/0x140 [] ? __raw_spin_lock_init+0x38/0x70 [] usb_register_driver+0xdc/0x190 [usbcore] [] ? ath9k_htc_init+0x0/0x4f [ath9k_htc] [] ath9k_hif_usb_init+0x1e/0x20 [ath9k_htc] [] ath9k_htc_init+0x2b/0x4f [ath9k_htc] [] do_one_initcall+0x3f/0x180 [] sys_init_module+0xbb/0x200 [] system_call_fastpath+0x16/0x1b Code: RIP [] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] RSP CR2: 0000000000000004 ---[ end trace 79e4193601c8b713 ]--- Reported-by: Sujith Manoharan Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- include/net/cfg80211.h | 4 +++- net/wireless/reg.c | 3 ++- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'include/net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 3d1c09b777e8..6dc665a727c2 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1419,7 +1419,9 @@ struct ieee80211_txrx_stypes { /** * struct wiphy - wireless hardware description - * @reg_notifier: the driver's regulatory notification callback + * @reg_notifier: the driver's regulatory notification callback, + * note that if your driver uses wiphy_apply_custom_regulatory() + * the reg_notifier's request can be passed as NULL * @regd: the driver's regulatory domain, if one was requested via * the regulatory_hint() API. This can be used by the driver * on the reg_notifier() if it chooses to ignore future diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 5ed615f94e0c..99d41831d76e 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -661,7 +661,8 @@ static int freq_reg_info_regd(struct wiphy *wiphy, * Follow the driver's regulatory domain, if present, unless a country * IE has been processed or a user wants to help complaince further */ - if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + if (!custom_regd && + last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && last_request->initiator != NL80211_REGDOM_SET_BY_USER && wiphy->regd) regd = wiphy->regd; -- cgit v1.2.3 From 24bdd9f4c9af75b33b438d60381a67626de0128d Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Thu, 16 Dec 2010 17:37:48 -0800 Subject: mac80211: Rename mesh_params to mesh_config to prepare for mesh_setup Mesh parameters can be to setup a mesh or to configure it. This patch renames the ambiguous name mesh_params to mesh_config in preparation for mesh_setup. Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- include/linux/nl80211.h | 15 ++++++++++----- include/net/cfg80211.h | 8 ++++---- net/mac80211/cfg.c | 8 ++++---- net/wireless/nl80211.c | 40 ++++++++++++++++++++-------------------- 4 files changed, 38 insertions(+), 33 deletions(-) (limited to 'include/net') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 7483a89cee8f..11a1de67b618 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -172,10 +172,10 @@ * to the specified ISO/IEC 3166-1 alpha2 country code. The core will * store this as a valid request and then query userspace for it. * - * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the + * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the * interface identified by %NL80211_ATTR_IFINDEX * - * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the + * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the * interface identified by %NL80211_ATTR_IFINDEX * * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The @@ -448,8 +448,8 @@ enum nl80211_commands { NL80211_CMD_SET_REG, NL80211_CMD_REQ_SET_REG, - NL80211_CMD_GET_MESH_PARAMS, - NL80211_CMD_SET_MESH_PARAMS, + NL80211_CMD_GET_MESH_CONFIG, + NL80211_CMD_SET_MESH_CONFIG, NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, @@ -538,6 +538,10 @@ enum nl80211_commands { #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT +/* source-level API compatibility */ +#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG +#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG + /** * enum nl80211_attrs - nl80211 netlink attributes * @@ -922,7 +926,7 @@ enum nl80211_attrs { NL80211_ATTR_REG_ALPHA2, NL80211_ATTR_REG_RULES, - NL80211_ATTR_MESH_PARAMS, + NL80211_ATTR_MESH_CONFIG, NL80211_ATTR_BSS_BASIC_RATES, @@ -1058,6 +1062,7 @@ enum nl80211_attrs { /* source-level API compatibility */ #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION +#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG /* * Allow user space programs to use #ifdef on new attributes by defining them diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 6dc665a727c2..7283496c2d05 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1096,9 +1096,9 @@ struct cfg80211_pmksa { * @get_mpath: get a mesh path for the given parameters * @dump_mpath: dump mesh path callback -- resume dump at index @idx * - * @get_mesh_params: Put the current mesh parameters into *params + * @get_mesh_config: Get the current mesh configuration * - * @update_mesh_params: Update mesh parameters on a running mesh. + * @update_mesh_config: Update mesh parameters on a running mesh. * The mask is a bitfield which tells us which parameters to * set, and which to leave alone. * @@ -1246,10 +1246,10 @@ struct cfg80211_ops { int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev, int idx, u8 *dst, u8 *next_hop, struct mpath_info *pinfo); - int (*get_mesh_params)(struct wiphy *wiphy, + int (*get_mesh_config)(struct wiphy *wiphy, struct net_device *dev, struct mesh_config *conf); - int (*update_mesh_params)(struct wiphy *wiphy, + int (*update_mesh_config)(struct wiphy *wiphy, struct net_device *dev, u32 mask, const struct mesh_config *nconf); int (*join_mesh)(struct wiphy *wiphy, struct net_device *dev, diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index ea06f92801e9..1c94a2ae22ee 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -984,7 +984,7 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev, return 0; } -static int ieee80211_get_mesh_params(struct wiphy *wiphy, +static int ieee80211_get_mesh_config(struct wiphy *wiphy, struct net_device *dev, struct mesh_config *conf) { @@ -1000,7 +1000,7 @@ static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask) return (mask >> (parm-1)) & 0x1; } -static int ieee80211_update_mesh_params(struct wiphy *wiphy, +static int ieee80211_update_mesh_config(struct wiphy *wiphy, struct net_device *dev, u32 mask, const struct mesh_config *nconf) { @@ -1787,8 +1787,8 @@ struct cfg80211_ops mac80211_config_ops = { .change_mpath = ieee80211_change_mpath, .get_mpath = ieee80211_get_mpath, .dump_mpath = ieee80211_dump_mpath, - .update_mesh_params = ieee80211_update_mesh_params, - .get_mesh_params = ieee80211_get_mesh_params, + .update_mesh_config = ieee80211_update_mesh_config, + .get_mesh_config = ieee80211_get_mesh_config, .join_mesh = ieee80211_join_mesh, .leave_mesh = ieee80211_leave_mesh, #endif diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index aefce54d47e2..10be9350752e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -123,7 +123,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { .len = NL80211_MAX_SUPP_RATES }, [NL80211_ATTR_BSS_HT_OPMODE] = { .type = NLA_U16 }, - [NL80211_ATTR_MESH_PARAMS] = { .type = NLA_NESTED }, + [NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED }, [NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY, .len = NL80211_HT_CAPABILITY_LEN }, @@ -719,7 +719,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, CMD(add_beacon, NEW_BEACON); CMD(add_station, NEW_STATION); CMD(add_mpath, NEW_MPATH); - CMD(update_mesh_params, SET_MESH_PARAMS); + CMD(update_mesh_config, SET_MESH_CONFIG); CMD(change_bss, SET_BSS); CMD(auth, AUTHENTICATE); CMD(assoc, ASSOCIATE); @@ -2673,7 +2673,7 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info) return r; } -static int nl80211_get_mesh_params(struct sk_buff *skb, +static int nl80211_get_mesh_config(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; @@ -2688,7 +2688,7 @@ static int nl80211_get_mesh_params(struct sk_buff *skb, if (wdev->iftype != NL80211_IFTYPE_MESH_POINT) return -EOPNOTSUPP; - if (!rdev->ops->get_mesh_params) + if (!rdev->ops->get_mesh_config) return -EOPNOTSUPP; wdev_lock(wdev); @@ -2696,7 +2696,7 @@ static int nl80211_get_mesh_params(struct sk_buff *skb, if (!wdev->mesh_id_len) memcpy(&cur_params, &default_mesh_config, sizeof(cur_params)); else - err = rdev->ops->get_mesh_params(&rdev->wiphy, dev, + err = rdev->ops->get_mesh_config(&rdev->wiphy, dev, &cur_params); wdev_unlock(wdev); @@ -2708,10 +2708,10 @@ static int nl80211_get_mesh_params(struct sk_buff *skb, if (!msg) return -ENOMEM; hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0, - NL80211_CMD_GET_MESH_PARAMS); + NL80211_CMD_GET_MESH_CONFIG); if (!hdr) goto nla_put_failure; - pinfoattr = nla_nest_start(msg, NL80211_ATTR_MESH_PARAMS); + pinfoattr = nla_nest_start(msg, NL80211_ATTR_MESH_CONFIG); if (!pinfoattr) goto nla_put_failure; NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex); @@ -2773,7 +2773,7 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A [NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME] = { .type = NLA_U16 }, }; -static int nl80211_parse_mesh_params(struct genl_info *info, +static int nl80211_parse_mesh_config(struct genl_info *info, struct mesh_config *cfg, u32 *mask_out) { @@ -2789,10 +2789,10 @@ do {\ } while (0);\ - if (!info->attrs[NL80211_ATTR_MESH_PARAMS]) + if (!info->attrs[NL80211_ATTR_MESH_CONFIG]) return -EINVAL; if (nla_parse_nested(tb, NL80211_MESHCONF_ATTR_MAX, - info->attrs[NL80211_ATTR_MESH_PARAMS], + info->attrs[NL80211_ATTR_MESH_CONFIG], nl80211_meshconf_params_policy)) return -EINVAL; @@ -2847,7 +2847,7 @@ do {\ #undef FILL_IN_MESH_PARAM_IF_SET } -static int nl80211_update_mesh_params(struct sk_buff *skb, +static int nl80211_update_mesh_config(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; @@ -2860,10 +2860,10 @@ static int nl80211_update_mesh_params(struct sk_buff *skb, if (wdev->iftype != NL80211_IFTYPE_MESH_POINT) return -EOPNOTSUPP; - if (!rdev->ops->update_mesh_params) + if (!rdev->ops->update_mesh_config) return -EOPNOTSUPP; - err = nl80211_parse_mesh_params(info, &cfg, &mask); + err = nl80211_parse_mesh_config(info, &cfg, &mask); if (err) return err; @@ -2872,7 +2872,7 @@ static int nl80211_update_mesh_params(struct sk_buff *skb, err = -ENOLINK; if (!err) - err = rdev->ops->update_mesh_params(&rdev->wiphy, dev, + err = rdev->ops->update_mesh_config(&rdev->wiphy, dev, mask, &cfg); wdev_unlock(wdev); @@ -4672,9 +4672,9 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info) /* start with default */ memcpy(&cfg, &default_mesh_config, sizeof(cfg)); - if (info->attrs[NL80211_ATTR_MESH_PARAMS]) { + if (info->attrs[NL80211_ATTR_MESH_CONFIG]) { /* and parse parameters if given */ - err = nl80211_parse_mesh_params(info, &cfg, NULL); + err = nl80211_parse_mesh_config(info, &cfg, NULL); if (err) return err; } @@ -4952,16 +4952,16 @@ static struct genl_ops nl80211_ops[] = { .flags = GENL_ADMIN_PERM, }, { - .cmd = NL80211_CMD_GET_MESH_PARAMS, - .doit = nl80211_get_mesh_params, + .cmd = NL80211_CMD_GET_MESH_CONFIG, + .doit = nl80211_get_mesh_config, .policy = nl80211_policy, /* can be retrieved by unprivileged users */ .internal_flags = NL80211_FLAG_NEED_NETDEV | NL80211_FLAG_NEED_RTNL, }, { - .cmd = NL80211_CMD_SET_MESH_PARAMS, - .doit = nl80211_update_mesh_params, + .cmd = NL80211_CMD_SET_MESH_CONFIG, + .doit = nl80211_update_mesh_config, .policy = nl80211_policy, .flags = GENL_ADMIN_PERM, .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | -- cgit v1.2.3 From c80d545da3f7c0e534ccd4a780f322f80a92cff1 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Thu, 16 Dec 2010 17:37:49 -0800 Subject: mac80211: Let userspace enable and configure vendor specific path selection. Userspace will now be allowed to toggle between the default path selection algorithm (HWMP, implemented in the kernel), and a vendor specific alternative. Also in the same patch, allow userspace to add information elements to mesh beacons. This is accordance with the Extensible Path Selection Framework specified in version 7.0 of the 802.11s draft. Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 25 ++++++++++++++++++ include/linux/nl80211.h | 47 +++++++++++++++++++++++++++++++--- include/net/cfg80211.h | 8 ++++++ net/mac80211/cfg.c | 39 +++++++++++++++++++++++++--- net/mac80211/ieee80211_i.h | 4 +-- net/mac80211/mesh.c | 7 ++++++ net/mac80211/mesh_plink.c | 3 ++- net/mac80211/tx.c | 3 ++- net/wireless/core.c | 22 +++++++++++----- net/wireless/core.h | 5 ++-- net/wireless/mesh.c | 24 ++++++++++-------- net/wireless/nl80211.c | 63 ++++++++++++++++++++++++++++++++++++++++++---- 12 files changed, 214 insertions(+), 36 deletions(-) (limited to 'include/net') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 7f2354534242..cd681681d211 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1291,6 +1291,31 @@ enum ieee80211_key_len { WLAN_KEY_LEN_AES_CMAC = 16, }; +/** + * enum - mesh path selection protocol identifier + * + * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol + * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will + * be specified in a vendor specific information element + */ +enum { + IEEE80211_PATH_PROTOCOL_HWMP = 0, + IEEE80211_PATH_PROTOCOL_VENDOR = 255, +}; + +/** + * enum - mesh path selection metric identifier + * + * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric + * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be + * specified in a vendor specific information element + */ +enum { + IEEE80211_PATH_METRIC_AIRTIME = 0, + IEEE80211_PATH_METRIC_VENDOR = 255, +}; + + /* * IEEE 802.11-2007 7.3.2.9 Country information element * diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 11a1de67b618..69eaccac78c4 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -872,6 +872,9 @@ enum nl80211_commands { * attributes, specifying what a key should be set as default as. * See &enum nl80211_key_default_types. * + * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be + * changed once the mesh is active. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1054,6 +1057,8 @@ enum nl80211_attrs { NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, + NL80211_ATTR_MESH_SETUP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1564,7 +1569,8 @@ enum nl80211_mntr_flags { /** * enum nl80211_meshconf_params - mesh configuration parameters * - * Mesh configuration parameters + * Mesh configuration parameters. These can be changed while the mesh is + * active. * * @__NL80211_MESHCONF_INVALID: internal use * @@ -1587,9 +1593,6 @@ enum nl80211_mntr_flags { * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh * point. * - * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a - * source mesh point for path selection elements. - * * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically * open peer links when we detect compatible mesh peers. * @@ -1616,6 +1619,9 @@ enum nl80211_mntr_flags { * * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not * + * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a + * source mesh point for path selection elements. + * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use @@ -1643,6 +1649,39 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 }; +/** + * enum nl80211_mesh_setup_params - mesh setup parameters + * + * Mesh setup parameters. These are used to start/join a mesh and cannot be + * changed while the mesh is active. + * + * @__NL80211_MESH_SETUP_INVALID: Internal use + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a + * vendor specific path selection algorithm or disable it to use the default + * HWMP. + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a + * vendor specific path metric or disable it to use the default Airtime + * metric. + * + * @NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE: A vendor specific information + * element that vendors will use to identify the path selection methods and + * metrics in use. + * + * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use + */ +enum nl80211_mesh_setup_params { + __NL80211_MESH_SETUP_INVALID, + NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, + NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, + NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE, + + /* keep last */ + __NL80211_MESH_SETUP_ATTR_AFTER_LAST, + NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 +}; + /** * enum nl80211_txq_attr - TX queue parameter attributes * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 7283496c2d05..924d60366233 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -649,12 +649,20 @@ struct mesh_config { * struct mesh_setup - 802.11s mesh setup configuration * @mesh_id: the mesh ID * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes + * @path_sel_proto: which path selection protocol to use + * @path_metric: which metric to use + * @vendor_ie: vendor information elements (optional) + * @vendor_ie_len: length of vendor information elements * * These parameters are fixed when the mesh is created. */ struct mesh_setup { const u8 *mesh_id; u8 mesh_id_len; + u8 path_sel_proto; + u8 path_metric; + const u8 *vendor_ie; + u8 vendor_ie_len; }; /** diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 1c94a2ae22ee..ae2c7127a8aa 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1000,6 +1000,36 @@ static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask) return (mask >> (parm-1)) & 0x1; } +static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh, + const struct mesh_setup *setup) +{ + u8 *new_ie; + const u8 *old_ie; + + /* first allocate the new vendor information element */ + new_ie = NULL; + old_ie = ifmsh->vendor_ie; + + ifmsh->vendor_ie_len = setup->vendor_ie_len; + if (setup->vendor_ie_len) { + new_ie = kmemdup(setup->vendor_ie, setup->vendor_ie_len, + GFP_KERNEL); + if (!new_ie) + return -ENOMEM; + } + + /* now copy the rest of the setup parameters */ + ifmsh->mesh_id_len = setup->mesh_id_len; + memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len); + ifmsh->mesh_pp_id = setup->path_sel_proto; + ifmsh->mesh_pm_id = setup->path_metric; + ifmsh->vendor_ie = new_ie; + + kfree(old_ie); + + return 0; +} + static int ieee80211_update_mesh_config(struct wiphy *wiphy, struct net_device *dev, u32 mask, const struct mesh_config *nconf) @@ -1059,11 +1089,12 @@ static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev, { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + int err; - memcpy(&sdata->u.mesh.mshcfg, conf, sizeof(struct mesh_config)); - ifmsh->mesh_id_len = setup->mesh_id_len; - memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len); - + memcpy(&ifmsh->mshcfg, conf, sizeof(struct mesh_config)); + err = copy_mesh_setup(ifmsh, setup); + if (err) + return err; ieee80211_start_mesh(sdata); return 0; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index ce58b2a676e2..eadaa243a3da 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -484,6 +484,8 @@ struct ieee80211_if_mesh { struct mesh_config mshcfg; u32 mesh_seqnum; bool accepting_plinks; + const u8 *vendor_ie; + u8 vendor_ie_len; }; #ifdef CONFIG_MAC80211_MESH @@ -585,9 +587,7 @@ struct ieee80211_sub_if_data { struct ieee80211_if_vlan vlan; struct ieee80211_if_managed mgd; struct ieee80211_if_ibss ibss; -#ifdef CONFIG_MAC80211_MESH struct ieee80211_if_mesh mesh; -#endif u32 mntr_flags; } u; diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 63e1188d5062..c326e009389d 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -287,6 +287,13 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) *pos++ |= sdata->u.mesh.accepting_plinks ? MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; *pos++ = 0x00; + + if (sdata->u.mesh.vendor_ie) { + int len = sdata->u.mesh.vendor_ie_len; + const u8 *data = sdata->u.mesh.vendor_ie; + if (skb_tailroom(skb) > len) + memcpy(skb_put(skb, len), data, len); + } } u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl) diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 1c91f0f3c307..44b53931ba5e 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -160,7 +160,8 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, enum plink_frame_type action, u8 *da, __le16 llid, __le16 plid, __le16 reason) { struct ieee80211_local *local = sdata->local; - struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400); + struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400 + + sdata->u.mesh.vendor_ie_len); struct ieee80211_mgmt *mgmt; bool include_plid = false; static const u8 meshpeeringproto[] = { 0x00, 0x0F, 0xAC, 0x2A }; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 157bde993ef5..f4b1b624ea9f 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2290,7 +2290,8 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, u8 *pos; /* headroom, head length, tail length and maximum TIM length */ - skb = dev_alloc_skb(local->tx_headroom + 400); + skb = dev_alloc_skb(local->tx_headroom + 400 + + sdata->u.mesh.vendor_ie_len); if (!skb) goto out; diff --git a/net/wireless/core.c b/net/wireless/core.c index 79772fcc37bc..e9a5f8ca4c27 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -789,13 +789,23 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb, cfg80211_mgd_wext_connect(rdev, wdev); break; #endif +#ifdef CONFIG_MAC80211_MESH case NL80211_IFTYPE_MESH_POINT: - /* backward compat code ... */ - if (wdev->mesh_id_up_len) - __cfg80211_join_mesh(rdev, dev, wdev->ssid, - wdev->mesh_id_up_len, - &default_mesh_config); - break; + { + /* backward compat code... */ + struct mesh_setup setup; + memcpy(&setup, &default_mesh_setup, + sizeof(setup)); + /* back compat only needed for mesh_id */ + setup.mesh_id = wdev->ssid; + setup.mesh_id_len = wdev->mesh_id_up_len; + if (wdev->mesh_id_up_len) + __cfg80211_join_mesh(rdev, dev, + &setup, + &default_mesh_config); + break; + } +#endif default: break; } diff --git a/net/wireless/core.h b/net/wireless/core.h index 743203bb61ac..26a0a084e16b 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -287,13 +287,14 @@ int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev, /* mesh */ extern const struct mesh_config default_mesh_config; +extern const struct mesh_setup default_mesh_setup; int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, struct net_device *dev, - const u8 *mesh_id, u8 mesh_id_len, + const struct mesh_setup *setup, const struct mesh_config *conf); int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, struct net_device *dev, - const u8 *mesh_id, u8 mesh_id_len, + const struct mesh_setup *setup, const struct mesh_config *conf); int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev, struct net_device *dev); diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index e0b9747fe50a..73e39c171ffb 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -50,17 +50,19 @@ const struct mesh_config default_mesh_config = { .min_discovery_timeout = MESH_MIN_DISCOVERY_TIMEOUT, }; +const struct mesh_setup default_mesh_setup = { + .path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP, + .path_metric = IEEE80211_PATH_METRIC_AIRTIME, + .vendor_ie = NULL, + .vendor_ie_len = 0, +}; int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, struct net_device *dev, - const u8 *mesh_id, u8 mesh_id_len, + const struct mesh_setup *setup, const struct mesh_config *conf) { struct wireless_dev *wdev = dev->ieee80211_ptr; - struct mesh_setup setup = { - .mesh_id = mesh_id, - .mesh_id_len = mesh_id_len, - }; int err; BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN); @@ -73,16 +75,16 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, if (wdev->mesh_id_len) return -EALREADY; - if (!mesh_id_len) + if (!setup->mesh_id_len) return -EINVAL; if (!rdev->ops->join_mesh) return -EOPNOTSUPP; - err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, &setup); + err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, setup); if (!err) { - memcpy(wdev->ssid, mesh_id, mesh_id_len); - wdev->mesh_id_len = mesh_id_len; + memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len); + wdev->mesh_id_len = setup->mesh_id_len; } return err; @@ -90,14 +92,14 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, struct net_device *dev, - const u8 *mesh_id, u8 mesh_id_len, + const struct mesh_setup *setup, const struct mesh_config *conf) { struct wireless_dev *wdev = dev->ieee80211_ptr; int err; wdev_lock(wdev); - err = __cfg80211_join_mesh(rdev, dev, mesh_id, mesh_id_len, conf); + err = __cfg80211_join_mesh(rdev, dev, setup, conf); wdev_unlock(wdev); return err; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 10be9350752e..eef89d0b558b 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -2773,6 +2773,14 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A [NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME] = { .type = NLA_U16 }, }; +static const struct nla_policy + nl80211_mesh_setup_params_policy[NL80211_MESH_SETUP_ATTR_MAX+1] = { + [NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL] = { .type = NLA_U8 }, + [NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC] = { .type = NLA_U8 }, + [NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE] = { .type = NLA_BINARY, + .len = IEEE80211_MAX_DATA_LEN }, +}; + static int nl80211_parse_mesh_config(struct genl_info *info, struct mesh_config *cfg, u32 *mask_out) @@ -2839,14 +2847,50 @@ do {\ dot11MeshHWMPRootMode, mask, NL80211_MESHCONF_HWMP_ROOTMODE, nla_get_u8); - if (mask_out) *mask_out = mask; + return 0; #undef FILL_IN_MESH_PARAM_IF_SET } +static int nl80211_parse_mesh_setup(struct genl_info *info, + struct mesh_setup *setup) +{ + struct nlattr *tb[NL80211_MESH_SETUP_ATTR_MAX + 1]; + + if (!info->attrs[NL80211_ATTR_MESH_SETUP]) + return -EINVAL; + if (nla_parse_nested(tb, NL80211_MESH_SETUP_ATTR_MAX, + info->attrs[NL80211_ATTR_MESH_SETUP], + nl80211_mesh_setup_params_policy)) + return -EINVAL; + + if (tb[NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL]) + setup->path_sel_proto = + (nla_get_u8(tb[NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL])) ? + IEEE80211_PATH_PROTOCOL_VENDOR : + IEEE80211_PATH_PROTOCOL_HWMP; + + if (tb[NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC]) + setup->path_metric = + (nla_get_u8(tb[NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC])) ? + IEEE80211_PATH_METRIC_VENDOR : + IEEE80211_PATH_METRIC_AIRTIME; + + if (tb[NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE]) { + struct nlattr *ieattr = + tb[NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE]; + if (!is_valid_ie_attr(ieattr)) + return -EINVAL; + setup->vendor_ie = nla_data(ieattr); + setup->vendor_ie_len = nla_len(ieattr); + } + + return 0; +} + static int nl80211_update_mesh_config(struct sk_buff *skb, struct genl_info *info) { @@ -4667,10 +4711,12 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info) struct cfg80211_registered_device *rdev = info->user_ptr[0]; struct net_device *dev = info->user_ptr[1]; struct mesh_config cfg; + struct mesh_setup setup; int err; /* start with default */ memcpy(&cfg, &default_mesh_config, sizeof(cfg)); + memcpy(&setup, &default_mesh_setup, sizeof(setup)); if (info->attrs[NL80211_ATTR_MESH_CONFIG]) { /* and parse parameters if given */ @@ -4683,10 +4729,17 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info) !nla_len(info->attrs[NL80211_ATTR_MESH_ID])) return -EINVAL; - return cfg80211_join_mesh(rdev, dev, - nla_data(info->attrs[NL80211_ATTR_MESH_ID]), - nla_len(info->attrs[NL80211_ATTR_MESH_ID]), - &cfg); + setup.mesh_id = nla_data(info->attrs[NL80211_ATTR_MESH_ID]); + setup.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]); + + if (info->attrs[NL80211_ATTR_MESH_SETUP]) { + /* parse additional setup parameters if given */ + err = nl80211_parse_mesh_setup(info, &setup); + if (err) + return err; + } + + return cfg80211_join_mesh(rdev, dev, &setup, &cfg); } static int nl80211_leave_mesh(struct sk_buff *skb, struct genl_info *info) -- cgit v1.2.3 From 7f531e03abf0162df3966c4fa5fa6fdd9302cb6b Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Thu, 16 Dec 2010 11:30:22 +0900 Subject: cfg80211: Separate available antennas for RX and TX As has been pointed out by Daniel Halperin some devices (e.g. Intel IWL5100) can only TX from a subset of RX antennas, so use separate availability masks for RX and TX. Signed-off-by: Bruno Randolf Signed-off-by: John W. Linville --- include/net/cfg80211.h | 12 +++++++++--- net/wireless/nl80211.c | 17 ++++++++++------- 2 files changed, 19 insertions(+), 10 deletions(-) (limited to 'include/net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 924d60366233..bcc9f448ec4e 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1482,8 +1482,13 @@ struct ieee80211_txrx_stypes { * transmitted through nl80211, points to an array indexed by interface * type * - * @available_antennas: bitmap of antennas which are available to configure. - * antenna configuration commands will be rejected unless this is set. + * @available_antennas_tx: bitmap of antennas which are available to be + * configured as TX antennas. Antenna configuration commands will be + * rejected unless this or @available_antennas_rx is set. + * + * @available_antennas_rx: bitmap of antennas which are available to be + * configured as RX antennas. Antenna configuration commands will be + * rejected unless this or @available_antennas_tx is set. * * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation * may request, if implemented. @@ -1528,7 +1533,8 @@ struct wiphy { u8 max_num_pmkids; - u32 available_antennas; + u32 available_antennas_tx; + u32 available_antennas_rx; /* If multiple wiphys are registered and you're handed e.g. * a regular netdev with assigned ieee80211_ptr, you won't diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 6a5d6fa11e46..8d2f5f8d8080 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -605,7 +605,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, if (dev->wiphy.flags & WIPHY_FLAG_CONTROL_PORT_PROTOCOL) NLA_PUT_FLAG(msg, NL80211_ATTR_CONTROL_PORT_ETHERTYPE); - if (dev->wiphy.available_antennas && dev->ops->get_antenna) { + if ((dev->wiphy.available_antennas_tx || + dev->wiphy.available_antennas_rx) && dev->ops->get_antenna) { u32 tx_ant = 0, rx_ant = 0; int res; res = dev->ops->get_antenna(&dev->wiphy, &tx_ant, &rx_ant); @@ -1107,7 +1108,9 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NL80211_ATTR_WIPHY_ANTENNA_TX] && info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]) { u32 tx_ant, rx_ant; - if (!rdev->wiphy.available_antennas || !rdev->ops->set_antenna) { + if ((!rdev->wiphy.available_antennas_tx && + !rdev->wiphy.available_antennas_rx) || + !rdev->ops->set_antenna) { result = -EOPNOTSUPP; goto bad_res; } @@ -1116,15 +1119,15 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info) rx_ant = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]); /* reject antenna configurations which don't match the - * available antenna mask, except for the "all" mask */ - if ((~tx_ant && (tx_ant & ~rdev->wiphy.available_antennas)) || - (~rx_ant && (rx_ant & ~rdev->wiphy.available_antennas))) { + * available antenna masks, except for the "all" mask */ + if ((~tx_ant && (tx_ant & ~rdev->wiphy.available_antennas_tx)) || + (~rx_ant && (rx_ant & ~rdev->wiphy.available_antennas_rx))) { result = -EINVAL; goto bad_res; } - tx_ant = tx_ant & rdev->wiphy.available_antennas; - rx_ant = rx_ant & rdev->wiphy.available_antennas; + tx_ant = tx_ant & rdev->wiphy.available_antennas_tx; + rx_ant = rx_ant & rdev->wiphy.available_antennas_rx; result = rdev->ops->set_antenna(&rdev->wiphy, tx_ant, rx_ant); if (result) -- cgit v1.2.3