From 07633b5d0723ce2ec31262e1096dcf61311bf078 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 14 May 2008 16:17:00 -0700 Subject: ata: remove FIT() macro Use the kernel-provided clamp_val() macro. FIT was always applied to a member of struct ata_timing (unsigned short) and two constants. clamp_val will not cast to short anymore. Signed-off-by: Harvey Harrison Cc: Jeff Garzik Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 0f17643e0a6e..07ec193fc941 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -821,8 +821,6 @@ struct ata_timing { unsigned short udma; /* t2CYCTYP/2 */ }; -#define FIT(v, vmin, vmax) max_t(short, min_t(short, v, vmax), vmin) - /* * Core layer - drivers/ata/libata-core.c */ -- cgit v1.2.3 From bf1bff6fa9fdd4e92e57d80a5434fd5201c051fc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 19 May 2008 01:15:10 +0900 Subject: libata: increase PMP register access timeout to 3s This timeout was set low because previously PMP register access was done via polling and register access timeouts could stack up. This is no longer the case. One timeout will make all following accesses fail immediately. In rare cases both marvell and SIMG PMPs need almost a second. Bump it to 3s. While at it, rename it to SATA_PMP_RW_TIMEOUT. It's not specific to SCR access. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-pmp.c | 4 ++-- include/linux/libata.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index f3ad024394c2..04a486a3e7b8 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -48,7 +48,7 @@ static unsigned int sata_pmp_read(struct ata_link *link, int reg, u32 *r_val) tf.device = link->pmp; err_mask = ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0, - SATA_PMP_SCR_TIMEOUT); + SATA_PMP_RW_TIMEOUT); if (err_mask) return err_mask; @@ -88,7 +88,7 @@ static unsigned int sata_pmp_write(struct ata_link *link, int reg, u32 val) tf.lbah = (val >> 24) & 0xff; return ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0, - SATA_PMP_SCR_TIMEOUT); + SATA_PMP_RW_TIMEOUT); } /** diff --git a/include/linux/libata.h b/include/linux/libata.h index 07ec193fc941..8d6999da1d3e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -341,7 +341,7 @@ enum { ATA_EH_PMP_TRIES = 5, ATA_EH_PMP_LINK_TRIES = 3, - SATA_PMP_SCR_TIMEOUT = 250, + SATA_PMP_RW_TIMEOUT = 3000, /* PMP read/write timeout */ /* Horkage types. May be set by libata or controller on drives (some horkage may be drive/controller pair dependant */ -- cgit v1.2.3 From 50af2fa1e18d0ab411d06bf727ecadb7e01721e9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 19 May 2008 01:15:14 +0900 Subject: libata: ignore SIMG4726 config pseudo device I was hoping ATA_HORKAGE_NODMA | ATA_HORKAGE_SKIP_PM could keep it happy but no even this doesn't work under certain configurations and it's not like we can do anything useful with the cofig device anyway. Replace ATA_HORKAGE_SKIP_PM with ATA_HORKAGE_DISABLE and use it for the config device. This makes the device completely ignored by libata. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 10 ++++++++-- drivers/ata/libata-scsi.c | 6 ------ include/linux/libata.h | 2 +- 3 files changed, 9 insertions(+), 9 deletions(-) (limited to 'include') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index a12a27eb8c77..3c89f205c83f 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2126,6 +2126,13 @@ int ata_dev_configure(struct ata_device *dev) dev->horkage |= ata_dev_blacklisted(dev); ata_force_horkage(dev); + if (dev->horkage & ATA_HORKAGE_DISABLE) { + ata_dev_printk(dev, KERN_INFO, + "unsupported device, disabling\n"); + ata_dev_disable(dev); + return 0; + } + /* let ACPI work its magic */ rc = ata_acpi_on_devcfg(dev); if (rc) @@ -3893,8 +3900,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA }, { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA }, /* Odd clown on sil3726/4726 PMPs */ - { "Config Disk", NULL, ATA_HORKAGE_NODMA | - ATA_HORKAGE_SKIP_PM }, + { "Config Disk", NULL, ATA_HORKAGE_DISABLE }, /* Weird ATAPI devices */ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 }, diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 3ce43920e459..aeb6e01d82ce 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1082,12 +1082,6 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) if (((cdb[4] >> 4) & 0xf) != 0) goto invalid_fld; /* power conditions not supported */ - if (qc->dev->horkage & ATA_HORKAGE_SKIP_PM) { - /* the device lacks PM support, finish without doing anything */ - scmd->result = SAM_STAT_GOOD; - return 1; - } - if (cdb[4] & 0x1) { tf->nsect = 1; /* 1 sector, lba=0 */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 8d6999da1d3e..4a92fbafce9d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -351,7 +351,7 @@ enum { ATA_HORKAGE_NONCQ = (1 << 2), /* Don't use NCQ */ ATA_HORKAGE_MAX_SEC_128 = (1 << 3), /* Limit max sects to 128 */ ATA_HORKAGE_BROKEN_HPA = (1 << 4), /* Broken HPA */ - ATA_HORKAGE_SKIP_PM = (1 << 5), /* Skip PM operations */ + ATA_HORKAGE_DISABLE = (1 << 5), /* Disable it */ ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */ ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */ ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */ -- cgit v1.2.3