// SPDX-License-Identifier: GPL-2.0 /* Copyright(c) 2019 Intel Corporation. All rights rsvd. */ #include #include #include #include #include #include #include #include #include "../dmaengine.h" #include "idxd.h" #include "registers.h" enum irq_work_type { IRQ_WORK_NORMAL = 0, IRQ_WORK_PROCESS_FAULT, }; struct idxd_fault { struct work_struct work; u64 addr; struct idxd_device *idxd; }; struct idxd_resubmit { struct work_struct work; struct idxd_desc *desc; }; struct idxd_int_handle_revoke { struct work_struct work; struct idxd_device *idxd; }; static void idxd_device_reinit(struct work_struct *work) { struct idxd_device *idxd = container_of(work, struct idxd_device, work); struct device *dev = &idxd->pdev->dev; int rc, i; idxd_device_reset(idxd); rc = idxd_device_config(idxd); if (rc < 0) goto out; rc = idxd_device_enable(idxd); if (rc < 0) goto out; for (i = 0; i < idxd->max_wqs; i++) { struct idxd_wq *wq = idxd->wqs[i]; if (wq->state == IDXD_WQ_ENABLED) { rc = idxd_wq_enable(wq); if (rc < 0) { dev_warn(dev, "Unable to re-enable wq %s\n", dev_name(wq_confdev(wq))); } } } return; out: idxd_device_clear_state(idxd); } /* * The function sends a drain descriptor for the interrupt handle. The drain ensures * all descriptors with this interrupt handle is flushed and the interrupt * will allow the cleanup of the outstanding descriptors. */ static void idxd_int_handle_revoke_drain(struct idxd_irq_entry *ie) { struct idxd_wq *wq = ie_to_wq(ie); struct idxd_device *idxd = wq->idxd; struct device *dev = &idxd->pdev->dev; struct dsa_hw_desc desc = {}; void __iomem *portal; int rc; /* Issue a simple drain operation with interrupt but no completion record */ desc.flags = IDXD_OP_FLAG_RCI; desc.opcode = DSA_OPCODE_DRAIN; desc.priv = 1; if (ie->pasid != INVALID_IOASID) desc.pasid = ie->pasid; desc.int_handle = ie->int_handle; portal = idxd_wq_portal_addr(wq); /* * The wmb() makes sure that the descriptor is all there before we * issue. */ wmb(); if (wq_dedicated(wq)) { iosubmit_cmds512(portal, &desc, 1); } else { rc = idxd_enqcmds(wq, portal, &desc); /* This should not fail unless hardware failed. */ if (rc < 0) dev_warn(dev, "Failed to submit drain desc on wq %d\n", wq->id); } } static void idxd_abort_invalid_int_handle_descs(struct idxd_irq_entry *ie) { LIST_HEAD(flist); struct idxd_desc *d, *t; struct llist_node *head; spin_lock(&ie->list_lock); head = llist_del_all(&ie->pending_llist); if (head) { llist_for_each_entry_safe(d, t, head, llnode) list_add_tail(&d->list, &ie->work_list); } list_for_each_entry_safe(d, t, &ie->work_list, list) { if (d->completion->status == DSA_COMP_INT_HANDLE_INVAL) list_move_tail(&d->list, &flist); } spin_unlock(&ie->list_lock); list_for_each_entry_safe(d, t, &flist, list) { list_del(&d->list); idxd_dma_complete_txd(d, IDXD_COMPLETE_ABORT, true); } } static void idxd_int_handle_revoke(struct work_struct *work) { struct idxd_int_handle_revoke *revoke = container_of(work, struct idxd_int_handle_revoke, work); struct idxd_device *idxd = revoke->idxd; struct pci_dev *pdev = idxd->pdev; struct device *dev = &pdev->dev; int i, new_handle, rc; if (!idxd->request_int_handles) { kfree(revoke); dev_warn(dev, "Unexpected int handle refresh interrupt.\n"); return; } /* * The loop attempts to acquire new interrupt handle for all interrupt * vectors that supports a handle. If a new interrupt handle is acquired and the * wq is kernel type, the driver will kill the percpu_ref to pause all * ongoing descriptor submissions. The interrupt handle is then changed. * After change, the percpu_ref is revived and all the pending submissions * are woken to try again. A drain is sent to for the interrupt handle * at the end to make sure all invalid int handle descriptors are processed. */ for (i = 1; i < idxd->irq_cnt; i++) { struct idxd_irq_entry *ie = idxd_get_ie(idxd, i); struct idxd_wq *wq = ie_to_wq(ie); rc = idxd_device_request_int_handle(idxd, i, &new_handle, IDXD_IRQ_MSIX); if (rc < 0) { dev_warn(dev, "get int handle %d failed: %d\n", i, rc); /* * Failed to acquire new interrupt handle. Kill the WQ * and release all the pending submitters. The submitters will * get error return code and handle appropriately. */ ie->int_handle = INVALID_INT_HANDLE; idxd_wq_quiesce(wq); idxd_abort_invalid_int_handle_descs(ie); continue; } /* No change in interrupt handle, nothing needs to be done */ if (ie->int_handle == new_handle) continue; if (wq->state != IDXD_WQ_ENABLED || wq->type != IDXD_WQT_KERNEL) { /* * All the MSIX interrupts are allocated at once during probe. * Therefore we need to update all interrupts even if the WQ * isn't supporting interrupt operations. */ ie->int_handle = new_handle; continue; } mutex_lock(&wq->wq_lock); reinit_completion(&wq->wq_resurrect); /* Kill percpu_ref to pause additional descriptor submissions */ percpu_ref_kill(&wq->wq_active); /* Wait for all submitters quiesce before we change interrupt handle */ wait_for_completion(&wq->wq_dead); ie->int_handle = new_handle; /* Revive percpu ref and wake up all the waiting submitters */ percpu_ref_reinit(&wq->wq_active); complete_all(&wq->wq_resurrect); mutex_unlock(&wq->wq_lock); /* * The delay here is to wait for all possible MOVDIR64B that * are issued before percpu_ref_kill() has happened to have * reached the PCIe domain before the drain is issued. The driver * needs to ensure that the drain descriptor issued does not pass * all the other issued descriptors that contain the invalid * interrupt handle in order to ensure that the drain descriptor * interrupt will allow the cleanup of all the descriptors with * invalid interrupt handle. */ if (wq_dedicated(wq)) udelay(100); idxd_int_handle_revoke_drain(ie); } kfree(revoke); } static int process_misc_interrupts(struct idxd_device *idxd, u32 cause) { struct device *dev = &idxd->pdev->dev; union gensts_reg gensts; u32 val = 0; int i; bool err = false; if (cause & IDXD_INTC_HALT_STATE) goto halt; if (cause & IDXD_INTC_ERR) { spin_lock(&idxd->dev_lock); for (i = 0; i < 4; i++) idxd->sw_err.bits[i] = ioread64(idxd->reg_base + IDXD_SWERR_OFFSET + i * sizeof(u64)); iowrite64(idxd->sw_err.bits[0] & IDXD_SWERR_ACK, idxd->reg_base + IDXD_SWERR_OFFSET); if (idxd->sw_err.valid && idxd->sw_err.wq_idx_valid) { int id = idxd->sw_err.wq_idx; struct idxd_wq *wq = idxd->wqs[id]; if (wq->type == IDXD_WQT_USER) wake_up_interruptible(&wq->err_queue); } else { int i; for (i = 0; i < idxd->max_wqs; i++) { struct idxd_wq *wq = idxd->wqs[i]; if (wq->type == IDXD_WQT_USER) wake_up_interruptible(&wq->err_queue); } } spin_unlock(&idxd->dev_lock); val |= IDXD_INTC_ERR; for (i = 0; i < 4; i++) dev_warn(dev, "err[%d]: %#16.16llx\n", i, idxd->sw_err.bits[i]); err = true; } if (cause & IDXD_INTC_INT_HANDLE_REVOKED) { struct idxd_int_handle_revoke *revoke; val |= IDXD_INTC_INT_HANDLE_REVOKED; revoke = kzalloc(sizeof(*revoke), GFP_ATOMIC); if (revoke) { revoke->idxd = idxd; INIT_WORK(&revoke->work, idxd_int_handle_revoke); queue_work(idxd->wq, &revoke->work); } else { dev_err(dev, "Failed to allocate work for int handle revoke\n"); idxd_wqs_quiesce(idxd); } } if (cause & IDXD_INTC_CMD) { val |= IDXD_INTC_CMD; complete(idxd->cmd_done); } if (cause & IDXD_INTC_OCCUPY) { /* Driver does not utilize occupancy interrupt */ val |= IDXD_INTC_OCCUPY; } if (cause & IDXD_INTC_PERFMON_OVFL) { val |= IDXD_INTC_PERFMON_OVFL; perfmon_counter_overflow(idxd); } val ^= cause; if (val) dev_warn_once(dev, "Unexpected interrupt cause bits set: %#x\n", val); if (!err) return 0; halt: gensts.bits = ioread32(idxd->reg_base + IDXD_GENSTATS_OFFSET); if (gensts.state == IDXD_DEVICE_STATE_HALT) { idxd->state = IDXD_DEV_HALTED; if (gensts.reset_type == IDXD_DEVICE_RESET_SOFTWARE) { /* * If we need a software reset, we will throw the work * on a system workqueue in order to allow interrupts * for the device command completions. */ INIT_WORK(&idxd->work, idxd_device_reinit); queue_work(idxd->wq, &idxd->work); } else { idxd->state = IDXD_DEV_HALTED; idxd_wqs_quiesce(idxd); idxd_wqs_unmap_portal(idxd); spin_lock(&idxd->dev_lock); idxd_device_clear_state(idxd); dev_err(&idxd->pdev->dev, "idxd halted, need %s.\n", gensts.reset_type == IDXD_DEVICE_RESET_FLR ? "FLR" : "system reset"); spin_unlock(&idxd->dev_lock); return -ENXIO; } } return 0; } irqreturn_t idxd_misc_thread(int vec, void *data) { struct idxd_irq_entry *irq_entry = data; struct idxd_device *idxd = ie_to_idxd(irq_entry); int rc; u32 cause; cause = ioread32(idxd->reg_base + IDXD_INTCAUSE_OFFSET); if (cause) iowrite32(cause, idxd->reg_base + IDXD_INTCAUSE_OFFSET); while (cause) { rc = process_misc_interrupts(idxd, cause); if (rc < 0) break; cause = ioread32(idxd->reg_base + IDXD_INTCAUSE_OFFSET); if (cause) iowrite32(cause, idxd->reg_base + IDXD_INTCAUSE_OFFSET); } return IRQ_HANDLED; } static void idxd_int_handle_resubmit_work(struct work_struct *work) { struct idxd_resubmit *irw = container_of(work, struct idxd_resubmit, work); struct idxd_desc *desc = irw->desc; struct idxd_wq *wq = desc->wq; int rc; desc->completion->status = 0; rc = idxd_submit_desc(wq, desc); if (rc < 0) { dev_dbg(&wq->idxd->pdev->dev, "Failed to resubmit desc %d to wq %d.\n", desc->id, wq->id); /* * If the error is not -EAGAIN, it means the submission failed due to wq * has been killed instead of ENQCMDS failure. Here the driver needs to * notify the submitter of the failure by reporting abort status. * * -EAGAIN comes from ENQCMDS failure. idxd_submit_desc() will handle the * abort. */ if (rc != -EAGAIN) { desc->completion->status = IDXD_COMP_DESC_ABORT; idxd_dma_complete_txd(desc, IDXD_COMPLETE_ABORT, false); } idxd_free_desc(wq, desc); } kfree(irw); } bool idxd_queue_int_handle_resubmit(struct idxd_desc *desc) { struct idxd_wq *wq = desc->wq; struct idxd_device *idxd = wq->idxd; struct idxd_resubmit *irw; irw = kzalloc(sizeof(*irw), GFP_KERNEL); if (!irw) return false; irw->desc = desc; INIT_WORK(&irw->work, idxd_int_handle_resubmit_work); queue_work(idxd->wq, &irw->work); return true; } static void irq_process_pending_llist(struct idxd_irq_entry *irq_entry) { struct idxd_desc *desc, *t; struct llist_node *head; head = llist_del_all(&irq_entry->pending_llist); if (!head) return; llist_for_each_entry_safe(desc, t, head, llnode) { u8 status = desc->completion->status & DSA_COMP_STATUS_MASK; if (status) { /* * Check against the original status as ABORT is software defined * and 0xff, which DSA_COMP_STATUS_MASK can mask out. */ if (unlikely(desc->completion->status == IDXD_COMP_DESC_ABORT)) { idxd_dma_complete_txd(desc, IDXD_COMPLETE_ABORT, true); continue; } idxd_dma_complete_txd(desc, IDXD_COMPLETE_NORMAL, true); } else { spin_lock(&irq_entry->list_lock); list_add_tail(&desc->list, &irq_entry->work_list); spin_unlock(&irq_entry->list_lock); } } } static void irq_process_work_list(struct idxd_irq_entry *irq_entry) { LIST_HEAD(flist); struct idxd_desc *desc, *n; /* * This lock protects list corruption from access of list outside of the irq handler * thread. */ spin_lock(&irq_entry->list_lock); if (list_empty(&irq_entry->work_list)) { spin_unlock(&irq_entry->list_lock); return; } list_for_each_entry_safe(desc, n, &irq_entry->work_list, list) { if (desc->completion->status) { list_move_tail(&desc->list, &flist); } } spin_unlock(&irq_entry->list_lock); list_for_each_entry(desc, &flist, list) { /* * Check against the original status as ABORT is software defined * and 0xff, which DSA_COMP_STATUS_MASK can mask out. */ if (unlikely(desc->completion->status == IDXD_COMP_DESC_ABORT)) { idxd_dma_complete_txd(desc, IDXD_COMPLETE_ABORT, true); continue; } idxd_dma_complete_txd(desc, IDXD_COMPLETE_NORMAL, true); } } irqreturn_t idxd_wq_thread(int irq, void *data) { struct idxd_irq_entry *irq_entry = data; /* * There are two lists we are processing. The pending_llist is where * submmiter adds all the submitted descriptor after sending it to * the workqueue. It's a lockless singly linked list. The work_list * is the common linux double linked list. We are in a scenario of * multiple producers and a single consumer. The producers are all * the kernel submitters of descriptors, and the consumer is the * kernel irq handler thread for the msix vector when using threaded * irq. To work with the restrictions of llist to remain lockless, * we are doing the following steps: * 1. Iterate through the work_list and process any completed * descriptor. Delete the completed entries during iteration. * 2. llist_del_all() from the pending list. * 3. Iterate through the llist that was deleted from the pending list * and process the completed entries. * 4. If the entry is still waiting on hardware, list_add_tail() to * the work_list. */ irq_process_work_list(irq_entry); irq_process_pending_llist(irq_entry); return IRQ_HANDLED; }