/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 1999 by Ralf Baechle * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ #ifndef _ASM_SERIAL_H #define _ASM_SERIAL_H #include /* * This assumes you have a 1.8432 MHz clock for your UART. * * It'd be nice if someone built a serial card with a 24.576 MHz * clock, since the 16550A is capable of handling a top speed of 1.5 * megabits/second; but this requires the faster clock. */ #define BASE_BAUD (1843200 / 16) /* Standard COM flags (except for COM4, because of the 8514 problem) */ #ifdef CONFIG_SERIAL_DETECT_IRQ #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) #define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) #else #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF #endif #ifdef CONFIG_MACH_JAZZ #include #ifndef CONFIG_OLIVETTI_M700 /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know exactly which ones ... XXX */ #define JAZZ_BASE_BAUD ( 8000000 / 16 ) /* ( 3072000 / 16) */ #else /* but the M700 isn't such a strange beast */ #define JAZZ_BASE_BAUD BASE_BAUD #endif #define _JAZZ_SERIAL_INIT(int, base) \ { .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \ .iomem_base = (u8 *) base, .iomem_reg_shift = 0, \ .io_type = SERIAL_IO_MEM } #define JAZZ_SERIAL_PORT_DEFNS \ _JAZZ_SERIAL_INIT(JAZZ_SERIAL1_IRQ, JAZZ_SERIAL1_BASE), \ _JAZZ_SERIAL_INIT(JAZZ_SERIAL2_IRQ, JAZZ_SERIAL2_BASE), #else #define JAZZ_SERIAL_PORT_DEFNS #endif /* * Both Galileo boards have the same UART mappings. */ #if defined (CONFIG_MIPS_EV96100) || defined (CONFIG_MIPS_EV64120) #include #include #define EV96100_SERIAL_PORT_DEFNS \ { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \ .flags = STD_COM_FLAGS, \ .iomem_base = EV96100_UART0_REGS_BASE, .iomem_reg_shift = 2, \ .io_type = SERIAL_IO_MEM }, \ { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \ .flags = STD_COM_FLAGS, \ .iomem_base = EV96100_UART1_REGS_BASE, .iomem_reg_shift = 2, \ .io_type = SERIAL_IO_MEM }, #else #define EV96100_SERIAL_PORT_DEFNS #endif #ifdef CONFIG_MIPS_ITE8172 #include #include #include #define ITE_SERIAL_PORT_DEFNS \ { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \ .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \ { .baud_base = (24000000/(16*13)), .port = (IT8172_PCI_IO_BASE + IT8712_UART1_PORT), \ .irq = IT8172_SERIRQ_4, .flags = STD_COM_FLAGS, .type = 0x3 }, \ /* Smart Card Reader 0 */ \ { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR0_BASE), \ .irq = IT8172_SCR0_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \ /* Smart Card Reader 1 */ \ { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \ .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, #else #define ITE_SERIAL_PORT_DEFNS #endif #ifdef CONFIG_MIPS_IVR #include #include #define IVR_SERIAL_PORT_DEFNS \ { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \ .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \ /* Smart Card Reader 1 */ \ { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \ .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, #else #define IVR_SERIAL_PORT_DEFNS #endif #ifdef CONFIG_TOSHIBA_JMR3927 #include #define TXX927_SERIAL_PORT_DEFNS \ { .baud_base = JMR3927_BASE_BAUD, .port = UART0_ADDR, .irq = UART0_INT, \ .flags = UART0_FLAGS, .type = 1 }, \ { .baud_base = JMR3927_BASE_BAUD, .port = UART1_ADDR, .irq = UART1_INT, \ .flags = UART1_FLAGS, .type = 1 }, #else #define TXX927_SERIAL_PORT_DEFNS #endif #ifdef CONFIG_SERIAL_AU1X00 #include #ifdef CONFIG_SOC_AU1000 #define AU1000_SERIAL_PORT_DEFNS \ { .baud_base = 0, .port = UART0_ADDR, \ .iomem_base = (unsigned char *)UART0_ADDR, \ .irq = AU1000_UART0_INT, .flags = STD_COM_FLAGS, \ .iomem_reg_shift = 2 }, \ { .baud_base = 0, .port = UART1_ADDR, \ .iomem_base = (unsigned char *)UART1_ADDR, \ .irq = AU1000_UART1_INT, .flags = STD_COM_FLAGS, \ .iomem_reg_shift = 2 }, \ { .baud_base = 0, .port = UART2_ADDR, \ .iomem_base = (unsigned char *)UART2_ADDR, \ .irq = AU1000_UART2_INT, .flags = STD_COM_FLAGS, \ .iomem_reg_shift = 2 }, \ { .baud_base = 0, .port = UART3_ADDR, \ .iomem_base = (unsigned char *)UART3_ADDR, \ .irq = AU1000_UART3_INT, .flags = STD_COM_FLAGS, \ .iomem_reg_shift = 2 }, #endif #ifdef CONFIG_SOC_AU1500 #define AU1000_SERIAL_PORT_DEFNS \ { .baud_base = 0, .port = UART0_ADDR, \ .iomem_base = (unsigned char *)UART0_ADDR, \ .irq = AU1500_UART0_INT, .flags = STD_COM_FLAGS, \ .iomem_reg_shift = 2 }, \ { .baud_base = 0, .port = UART3_ADDR, \ .iomem_base = (unsigned char *)UART3_ADDR, \ .irq = AU1500_UART3_INT, .flags = STD_COM_FLAGS, \ .iomem_reg_shift = 2 }, #endif #ifdef CONFIG_SOC_AU1100 #define AU1000_SERIAL_PORT_DEFNS \ { .baud_base = 0, .port = UART0_ADDR, \ .iomem_base = (unsigned char *)UART0_ADDR, \ .irq = AU1100_UART0_INT, .flags = STD_COM_FLAGS, \ .iomem_reg_shift = 2 }, \ { .baud_base = 0, .port = UART1_ADDR, \ .iomem_base = (unsigned char *)UART1_ADDR, \ .irq = AU1100_UART1_INT, .flags = STD_COM_FLAGS, \ .iomem_reg_shift = 2 }, \ { .baud_base = 0, .port = UART3_ADDR, \ .iomem_base = (unsigned char *)UART3_ADDR, \ .irq = AU1100_UART3_INT, .flags = STD_COM_FLAGS, \ .iomem_reg_shift = 2 }, #endif #ifdef CONFIG_SOC_AU1550 #define AU1000_SERIAL_PORT_DEFNS \ { .baud_base = 0, .port = UART0_ADDR, \ .iomem_base = (unsigned char *)UART0_ADDR, \ .irq = AU1550_UART0_INT, .flags = STD_COM_FLAGS, \ .iomem_reg_shift = 2 }, \ { .baud_base = 0, .port = UART1_ADDR, \ .iomem_base = (unsigned char *)UART1_ADDR, \ .irq = AU1550_UART1_INT, .flags = STD_COM_FLAGS, \ .iomem_reg_shift = 2 }, \ { .baud_base = 0, .port = UART3_ADDR, \ .iomem_base = (unsigned char *)UART3_ADDR, \ .irq = AU1550_UART3_INT, .flags = STD_COM_FLAGS,\ .iomem_reg_shift = 2 }, #endif #ifdef CONFIG_SOC_AU1200 #define AU1000_SERIAL_PORT_DEFNS \ { .baud_base = 0, .port = UART0_ADDR, \ .iomem_base = (unsigned char *)UART0_ADDR, \ .irq = AU1200_UART0_INT, .flags = STD_COM_FLAGS, \ .iomem_reg_shift = 2 }, \ { .baud_base = 0, .port = UART1_ADDR, \ .iomem_base = (unsigned char *)UART1_ADDR, \ .irq = AU1200_UART1_INT, .flags = STD_COM_FLAGS, \ .iomem_reg_shift = 2 }, #endif #else #define AU1000_SERIAL_PORT_DEFNS #endif #ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT #define STD_SERIAL_PORT_DEFNS \ /* UART CLK PORT IRQ FLAGS */ \ { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ #else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ #define STD_SERIAL_PORT_DEFNS #endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ #ifdef CONFIG_MOMENCO_JAGUAR_ATX /* Ordinary NS16552 duart with a 20MHz crystal. */ #define JAGUAR_ATX_UART_CLK 20000000 #define JAGUAR_ATX_BASE_BAUD (JAGUAR_ATX_UART_CLK / 16) #define JAGUAR_ATX_SERIAL1_IRQ 6 #define JAGUAR_ATX_SERIAL1_BASE 0xfd000023L #define _JAGUAR_ATX_SERIAL_INIT(int, base) \ { .baud_base = JAGUAR_ATX_BASE_BAUD, irq: int, \ .flags = (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ .iomem_base = (u8 *) base, iomem_reg_shift: 2, \ io_type: SERIAL_IO_MEM } #define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS \ _JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE) #else #define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS #endif #ifdef CONFIG_MOMENCO_OCELOT_3 #define OCELOT_3_BASE_BAUD ( 20000000 / 16 ) #define OCELOT_3_SERIAL_IRQ 6 #define OCELOT_3_SERIAL_BASE (signed)0xfd000020 #define _OCELOT_3_SERIAL_INIT(int, base) \ { .baud_base = OCELOT_3_BASE_BAUD, irq: int, \ .flags = STD_COM_FLAGS, \ .iomem_base = (u8 *) base, iomem_reg_shift: 2, \ io_type: SERIAL_IO_MEM } #define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \ _OCELOT_3_SERIAL_INIT(OCELOT_3_SERIAL_IRQ, OCELOT_3_SERIAL_BASE) #else #define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS #endif #ifdef CONFIG_MOMENCO_OCELOT /* Ordinary NS16552 duart with a 20MHz crystal. */ #define OCELOT_BASE_BAUD ( 20000000 / 16 ) #define OCELOT_SERIAL1_IRQ 4 #define OCELOT_SERIAL1_BASE 0xe0001020 #define _OCELOT_SERIAL_INIT(int, base) \ { .baud_base = OCELOT_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \ .iomem_base = (u8 *) base, .iomem_reg_shift = 2, \ .io_type = SERIAL_IO_MEM } #define MOMENCO_OCELOT_SERIAL_PORT_DEFNS \ _OCELOT_SERIAL_INIT(OCELOT_SERIAL1_IRQ, OCELOT_SERIAL1_BASE) #else #define MOMENCO_OCELOT_SERIAL_PORT_DEFNS #endif #ifdef CONFIG_MOMENCO_OCELOT_G /* Ordinary NS16552 duart with a 20MHz crystal. */ #define OCELOT_G_BASE_BAUD ( 20000000 / 16 ) #define OCELOT_G_SERIAL1_IRQ 4 #if 0 #define OCELOT_G_SERIAL1_BASE 0xe0001020 #else #define OCELOT_G_SERIAL1_BASE 0xfd000020 #endif #define _OCELOT_G_SERIAL_INIT(int, base) \ { .baud_base = OCELOT_G_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,\ .iomem_base = (u8 *) base, .iomem_reg_shift = 2, \ .io_type = SERIAL_IO_MEM } #define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \ _OCELOT_G_SERIAL_INIT(OCELOT_G_SERIAL1_IRQ, OCELOT_G_SERIAL1_BASE) #else #define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS #endif #ifdef CONFIG_MOMENCO_OCELOT_C /* Ordinary NS16552 duart with a 20MHz crystal. */ #define OCELOT_C_BASE_BAUD ( 20000000 / 16 ) #define OCELOT_C_SERIAL1_IRQ 80 #define OCELOT_C_SERIAL1_BASE 0xfd000020 #define OCELOT_C_SERIAL2_IRQ 81 #define OCELOT_C_SERIAL2_BASE 0xfd000000 #define _OCELOT_C_SERIAL_INIT(int, base) \ { .baud_base = OCELOT_C_BASE_BAUD, \ .irq = (int), \ .flags = STD_COM_FLAGS, \ .iomem_base = (u8 *) base, \ .iomem_reg_shift = 2, \ .io_type = SERIAL_IO_MEM \ } #define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \ _OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL1_IRQ, OCELOT_C_SERIAL1_BASE), \ _OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL2_IRQ, OCELOT_C_SERIAL2_BASE) #else #define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS #endif #ifdef CONFIG_DDB5477 #include #define DDB5477_SERIAL_PORT_DEFNS \ { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART0, \ .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04200, \ .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM}, \ { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART1, \ .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04240, \ .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM}, #else #define DDB5477_SERIAL_PORT_DEFNS #endif #ifdef CONFIG_SGI_IP32 /* * The IP32 (SGI O2) has standard serial ports (UART 16550A) mapped in memory * They are initialized in ip32_setup */ #define IP32_SERIAL_PORT_DEFNS \ {},{}, #else #define IP32_SERIAL_PORT_DEFNS #endif /* CONFIG_SGI_IP32 */ #define SERIAL_PORT_DFNS \ DDB5477_SERIAL_PORT_DEFNS \ EV96100_SERIAL_PORT_DEFNS \ IP32_SERIAL_PORT_DEFNS \ ITE_SERIAL_PORT_DEFNS \ IVR_SERIAL_PORT_DEFNS \ JAZZ_SERIAL_PORT_DEFNS \ STD_SERIAL_PORT_DEFNS \ MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \ MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \ MOMENCO_OCELOT_SERIAL_PORT_DEFNS \ MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \ TXX927_SERIAL_PORT_DEFNS \ AU1000_SERIAL_PORT_DEFNS #endif /* _ASM_SERIAL_H */