summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2008-12-15 20:03:50 -0800
committerDavid S. Miller <davem@davemloft.net>2008-12-15 20:03:50 -0800
commiteb14f019597cd86c21a6c601d7e900f40030c2e7 (patch)
tree36fb2f36a1747f98988f87215db1eef3a71d45eb
parent9a4a84294b0d60b8c287131478f743ba2bc68949 (diff)
parenta3dd15444baa9c7522c8457ab564c41219dfb44c (diff)
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts: drivers/net/e1000e/ich8lan.c
-rw-r--r--Documentation/arm/mem_alignment2
-rw-r--r--Documentation/local_ops.txt2
-rw-r--r--MAINTAINERS17
-rw-r--r--Makefile2
-rw-r--r--arch/arm/common/sa1111.c2
-rw-r--r--arch/arm/include/asm/bitops.h16
-rw-r--r--arch/arm/include/asm/processor.h2
-rw-r--r--arch/arm/kernel/armksyms.c4
-rw-r--r--arch/arm/kernel/traps.c1
-rw-r--r--arch/arm/mach-omap1/io.c2
-rw-r--r--arch/arm/mach-pxa/include/mach/reset.h5
-rw-r--r--arch/arm/mm/alignment.c26
-rw-r--r--arch/arm/mm/fault.c1
-rw-r--r--arch/arm/plat-omap/include/mach/omapfb.h4
-rw-r--r--arch/arm/plat-omap/sram.c8
-rw-r--r--arch/arm/plat-orion/pcie.c2
-rw-r--r--arch/ia64/configs/generic_defconfig218
-rw-r--r--arch/ia64/hp/sim/Kconfig1
-rw-r--r--arch/ia64/include/asm/paravirt_privop.h1
-rw-r--r--arch/ia64/kernel/topology.c4
-rw-r--r--arch/ia64/sn/kernel/irq.c9
-rw-r--r--arch/ia64/sn/kernel/setup.c9
-rw-r--r--arch/mips/Kconfig.debug2
-rw-r--r--arch/mips/configs/fulong_defconfig921
-rw-r--r--arch/mips/configs/ip22_defconfig518
-rw-r--r--arch/mips/configs/ip32_defconfig1060
-rw-r--r--arch/mips/configs/malta_defconfig631
-rw-r--r--arch/mips/include/asm/asmmacro.h10
-rw-r--r--arch/mips/include/asm/pci.h5
-rw-r--r--arch/mips/kernel/scall32-o32.S7
-rw-r--r--arch/mips/kernel/scall64-n32.S2
-rw-r--r--arch/mips/kernel/scall64-o32.S16
-rw-r--r--arch/mips/kernel/vpe.c2
-rw-r--r--arch/mips/mm/dma-default.c3
-rw-r--r--arch/mips/mti-malta/Makefile5
-rw-r--r--arch/mips/mti-malta/malta-mtd.c63
-rw-r--r--arch/mips/mti-malta/malta-platform.c107
-rw-r--r--arch/mips/pci/pci.c24
-rw-r--r--arch/mn10300/kernel/entry.S3
-rw-r--r--arch/mn10300/kernel/gdb-io-serial.c2
-rw-r--r--arch/mn10300/kernel/mn10300-serial.c5
-rw-r--r--arch/mn10300/kernel/setup.c2
-rw-r--r--arch/mn10300/kernel/vmlinux.lds.S22
-rw-r--r--arch/powerpc/boot/Makefile1
-rw-r--r--arch/powerpc/boot/dts/mpc8349emitx.dts16
-rw-r--r--arch/powerpc/configs/83xx/mpc834x_itx_defconfig2
-rw-r--r--arch/powerpc/configs/mpc83xx_defconfig2
-rw-r--r--arch/powerpc/kernel/cpu_setup_44x.S1
-rw-r--r--arch/powerpc/kernel/cputable.c3
-rw-r--r--arch/powerpc/kernel/dma.c1
-rw-r--r--arch/powerpc/kernel/misc_32.S3
-rw-r--r--arch/sparc/include/asm/bitops_32.h1
-rw-r--r--arch/sparc64/kernel/ptrace.c2
-rw-r--r--arch/sparc64/kernel/visemul.c6
-rw-r--r--arch/um/drivers/mconsole_kern.c4
-rw-r--r--arch/x86/include/asm/amd_iommu_types.h24
-rw-r--r--arch/x86/include/asm/dma-mapping.h6
-rw-r--r--arch/x86/include/asm/topology.h2
-rw-r--r--arch/x86/include/asm/vmi.h8
-rw-r--r--arch/x86/kernel/amd_iommu.c49
-rw-r--r--arch/x86/kernel/mpparse.c3
-rw-r--r--arch/x86/kernel/paravirt-spinlocks.c3
-rw-r--r--arch/x86/kernel/pci-gart_64.c2
-rw-r--r--arch/x86/kernel/setup.c12
-rw-r--r--arch/x86/kernel/smpboot.c2
-rw-r--r--arch/x86/kernel/vmi_32.c16
-rw-r--r--arch/x86/oprofile/nmi_int.c5
-rw-r--r--arch/x86/oprofile/op_model_ppro.c4
-rw-r--r--block/blk-barrier.c4
-rw-r--r--block/blk-core.c26
-rw-r--r--block/blk-map.c2
-rw-r--r--block/blk-settings.c4
-rw-r--r--block/bsg.c2
-rw-r--r--block/compat_ioctl.c31
-rw-r--r--block/elevator.c7
-rw-r--r--block/genhd.c2
-rw-r--r--block/scsi_ioctl.c2
-rw-r--r--crypto/Kconfig36
-rw-r--r--crypto/Makefile18
-rw-r--r--drivers/acpi/battery.c9
-rw-r--r--drivers/acpi/toshiba_acpi.c54
-rw-r--r--drivers/ata/Kconfig44
-rw-r--r--drivers/ata/ata_piix.c9
-rw-r--r--drivers/ata/pata_hpt366.c4
-rw-r--r--drivers/ata/pata_ninja32.c9
-rw-r--r--drivers/ata/pata_sis.c1
-rw-r--r--drivers/block/pktcdvd.c6
-rw-r--r--drivers/cdrom/cdrom.c16
-rw-r--r--drivers/char/cp437.uni12
-rw-r--r--drivers/char/serial167.c2
-rw-r--r--drivers/char/vt.c2
-rw-r--r--drivers/firewire/fw-ohci.c11
-rw-r--r--drivers/firewire/fw-transaction.c3
-rw-r--r--drivers/firewire/fw-transaction.h2
-rw-r--r--drivers/gpu/drm/i915/i915_dma.c5
-rw-r--r--drivers/gpu/drm/i915/i915_drv.h15
-rw-r--r--drivers/gpu/drm/i915/i915_gem.c639
-rw-r--r--drivers/gpu/drm/i915/i915_gem_proc.c5
-rw-r--r--drivers/gpu/drm/i915/i915_gem_tiling.c7
-rw-r--r--drivers/gpu/drm/i915/i915_reg.h1
-rw-r--r--drivers/gpu/drm/radeon/radeon_drv.h1
-rw-r--r--drivers/gpu/drm/radeon/radeon_irq.c8
-rw-r--r--drivers/i2c/busses/i2c-highlander.c4
-rw-r--r--drivers/i2c/busses/i2c-pmcmsp.c2
-rw-r--r--drivers/ide/Kconfig14
-rw-r--r--drivers/ide/ide-io.c6
-rw-r--r--drivers/ide/pmac.c30
-rw-r--r--drivers/ide/sgiioc4.c6
-rw-r--r--drivers/ieee1394/nodemgr.c2
-rw-r--r--drivers/md/dm-table.c2
-rw-r--r--drivers/message/i2o/i2o_block.c2
-rw-r--r--drivers/message/i2o/iop.c1
-rw-r--r--drivers/misc/sgi-gru/grufault.c4
-rw-r--r--drivers/mtd/devices/m25p80.c28
-rw-r--r--drivers/mtd/maps/physmap.c26
-rw-r--r--drivers/mtd/nand/fsl_upm.c8
-rw-r--r--drivers/mtd/nand/pasemi_nand.c1
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c1
-rw-r--r--drivers/mtd/onenand/omap2.c17
-rw-r--r--drivers/net/e1000e/ich8lan.c9
-rw-r--r--drivers/net/sungem.c144
-rw-r--r--drivers/pci/pcie/aspm.c29
-rw-r--r--drivers/pci/slot.c1
-rw-r--r--drivers/pcmcia/bfin_cf_pcmcia.c2
-rw-r--r--drivers/rtc/rtc-ds1672.c6
-rw-r--r--drivers/rtc/rtc-max6900.c6
-rw-r--r--drivers/rtc/rtc-twl4030.c2
-rw-r--r--drivers/scsi/device_handler/scsi_dh_hp_sw.c12
-rw-r--r--drivers/scsi/sd.c2
-rw-r--r--drivers/scsi/sr.c2
-rw-r--r--drivers/serial/ioc3_serial.c6
-rw-r--r--drivers/serial/mpc52xx_uart.c4
-rw-r--r--drivers/serial/s3c2440.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.c2
-rw-r--r--drivers/video/aty/radeon_accel.c294
-rw-r--r--drivers/video/aty/radeon_backlight.c2
-rw-r--r--drivers/video/aty/radeon_base.c40
-rw-r--r--drivers/video/aty/radeon_pm.c6
-rw-r--r--drivers/video/aty/radeonfb.h38
-rw-r--r--drivers/video/console/fbcon.c6
-rw-r--r--drivers/video/mb862xx/mb862xxfb.c4
-rw-r--r--drivers/video/omap/omapfb_main.c2
-rw-r--r--drivers/watchdog/iTCO_wdt.c2
-rw-r--r--fs/block_dev.c21
-rw-r--r--fs/exec.c10
-rw-r--r--fs/exportfs/expfs.c4
-rw-r--r--fs/ext4/balloc.c4
-rw-r--r--fs/fcntl.c7
-rw-r--r--fs/inotify.c2
-rw-r--r--fs/ioctl.c12
-rw-r--r--fs/lockd/host.c3
-rw-r--r--fs/lockd/svc.c1
-rw-r--r--fs/nfsd/nfs4recover.c2
-rw-r--r--fs/nfsd/nfs4state.c1
-rw-r--r--fs/proc/base.c2
-rw-r--r--fs/proc/task_mmu.c4
-rw-r--r--fs/xfs/xfs_rename.c2
-rw-r--r--include/asm-generic/atomic.h2
-rw-r--r--include/asm-generic/audit_write.h2
-rw-r--r--include/asm-mn10300/uaccess.h2
-rw-r--r--include/linux/audit.h6
-rw-r--r--include/linux/blkdev.h10
-rw-r--r--include/linux/fs.h33
-rw-r--r--include/linux/ftrace.h3
-rw-r--r--include/linux/netdevice.h7
-rw-r--r--include/linux/smp.h2
-rw-r--r--include/video/radeon.h18
-rw-r--r--kernel/audit.c32
-rw-r--r--kernel/auditsc.c24
-rw-r--r--kernel/cgroup.c2
-rw-r--r--kernel/fork.c16
-rw-r--r--kernel/latencytop.c2
-rw-r--r--kernel/posix-cpu-timers.c2
-rw-r--r--kernel/power/swap.c2
-rw-r--r--kernel/relay.c7
-rw-r--r--kernel/sched.c2
-rw-r--r--kernel/sched_clock.c6
-rw-r--r--kernel/softlockup.c2
-rw-r--r--kernel/time/timekeeping.c22
-rw-r--r--lib/idr.c8
-rw-r--r--lib/percpu_counter.c7
-rw-r--r--mm/backing-dev.c2
-rw-r--r--mm/migrate.c59
-rw-r--r--mm/page_cgroup.c3
-rw-r--r--mm/slob.c2
-rw-r--r--mm/slub.c2
-rw-r--r--mm/swap.c13
-rw-r--r--mm/vmalloc.c2
-rw-r--r--net/core/netpoll.c2
-rw-r--r--net/ipv4/netfilter/nf_nat_rule.c2
-rw-r--r--net/ipv4/tcp_vegas.c80
-rw-r--r--net/ipv6/ndisc.c7
-rw-r--r--net/netfilter/xt_socket.c2
-rw-r--r--net/netlabel/netlabel_unlabeled.c38
-rw-r--r--net/phonet/pep-gprs.c27
-rw-r--r--net/sched/sch_netem.c3
-rw-r--r--net/sunrpc/svcsock.c9
197 files changed, 3729 insertions, 2520 deletions
diff --git a/Documentation/arm/mem_alignment b/Documentation/arm/mem_alignment
index d145ccca169..c7c7a114c78 100644
--- a/Documentation/arm/mem_alignment
+++ b/Documentation/arm/mem_alignment
@@ -24,7 +24,7 @@ real bad - it changes the behaviour of all unaligned instructions in user
space, and might cause programs to fail unexpectedly.
To change the alignment trap behavior, simply echo a number into
-/proc/sys/debug/alignment. The number is made up from various bits:
+/proc/cpu/alignment. The number is made up from various bits:
bit behavior when set
--- -----------------
diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt
index f4f8b1c6c8b..23045b8b50f 100644
--- a/Documentation/local_ops.txt
+++ b/Documentation/local_ops.txt
@@ -149,7 +149,7 @@ static void do_test_timer(unsigned long data)
int cpu;
/* Increment the counters */
- on_each_cpu(test_each, NULL, 0, 1);
+ on_each_cpu(test_each, NULL, 1);
/* Read all the counters */
printk("Counters read from CPU %d\n", smp_processor_id());
for_each_online_cpu(cpu) {
diff --git a/MAINTAINERS b/MAINTAINERS
index c3074e275cb..4b54fda5ac7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1527,10 +1527,10 @@ W: http://ebtables.sourceforge.net/
S: Maintained
ECRYPT FILE SYSTEM
-P: Mike Halcrow, Phillip Hellewell
-M: mhalcrow@us.ibm.com, phillip@hellewell.homeip.net
-L: ecryptfs-devel@lists.sourceforge.net
-W: http://ecryptfs.sourceforge.net/
+P: Tyler Hicks, Dustin Kirkland
+M: tyhicks@linux.vnet.ibm.com, kirkland@canonical.com
+L: ecryptfs-devel@lists.launchpad.net
+W: https://launchpad.net/ecryptfs
S: Supported
EDAC-CORE
@@ -3764,6 +3764,15 @@ M: drzeus-sdhci@drzeus.cx
L: sdhci-devel@list.drzeus.cx
S: Maintained
+SECURITY SUBSYSTEM
+F: security/
+P: James Morris
+M: jmorris@namei.org
+L: linux-kernel@vger.kernel.org
+L: linux-security-module@vger.kernel.org (suggested Cc:)
+T: git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+S: Supported
+
SECURITY CONTACT
P: Security Officers
M: security@kernel.org
diff --git a/Makefile b/Makefile
index 9a49960f7aa..6c2f51b7045 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 28
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc8
NAME = Erotic Pickled Herring
# *DOCUMENTATION*
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 47ccec95f3e..ef12794c3c6 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -630,7 +630,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
return -ENOMEM;
sachip->clk = clk_get(me, "SA1111_CLK");
- if (!sachip->clk) {
+ if (IS_ERR(sachip->clk)) {
ret = PTR_ERR(sachip->clk);
goto err_free;
}
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index 9a1db20e032..63a481fbbed 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -237,6 +237,7 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
#if __LINUX_ARM_ARCH__ < 5
#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__fls.h>
#include <asm-generic/bitops/__ffs.h>
#include <asm-generic/bitops/fls.h>
#include <asm-generic/bitops/ffs.h>
@@ -277,16 +278,19 @@ static inline int constant_fls(int x)
* the clz instruction for much better code efficiency.
*/
-#define __fls(x) \
- ( __builtin_constant_p(x) ? constant_fls(x) : \
- ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
-
-/* Implement fls() in C so that 64-bit args are suitably truncated */
static inline int fls(int x)
{
- return __fls(x);
+ int ret;
+
+ if (__builtin_constant_p(x))
+ return constant_fls(x);
+
+ asm("clz\t%0, %1" : "=r" (ret) : "r" (x) : "cc");
+ ret = 32 - ret;
+ return ret;
}
+#define __fls(x) (fls(x) - 1)
#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
#define __ffs(x) (ffs(x) - 1)
#define ffz(x) __ffs( ~(x) )
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 517a4d6ffc7..6ff33790f47 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -23,7 +23,7 @@
#include <asm/types.h>
#ifdef __KERNEL__
-#define STACK_TOP ((current->personality == PER_LINUX_32BIT) ? \
+#define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \
TASK_SIZE : TASK_SIZE_26)
#define STACK_TOP_MAX TASK_SIZE
#endif
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index c74f766ffc1..23af3c972c9 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -115,6 +115,8 @@ EXPORT_SYMBOL(__strnlen_user);
EXPORT_SYMBOL(__strncpy_from_user);
#ifdef CONFIG_MMU
+EXPORT_SYMBOL(copy_page);
+
EXPORT_SYMBOL(__copy_from_user);
EXPORT_SYMBOL(__copy_to_user);
EXPORT_SYMBOL(__clear_user);
@@ -181,8 +183,6 @@ EXPORT_SYMBOL(_find_first_bit_be);
EXPORT_SYMBOL(_find_next_bit_be);
#endif
-EXPORT_SYMBOL(copy_page);
-
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(mcount);
#endif
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 57e6874d0b8..79abc4ddc0c 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -18,6 +18,7 @@
#include <linux/personality.h>
#include <linux/kallsyms.h>
#include <linux/delay.h>
+#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/uaccess.h>
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index b3bd8ca8511..4c3e582f3d3 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -128,7 +128,7 @@ void __init omap1_map_common_io(void)
* Common low-level hardware init for omap1. This should only get called from
* board specific init.
*/
-void __init omap1_init_common_hw()
+void __init omap1_init_common_hw(void)
{
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
index 7b8842cfa5f..31e6a7b6ad8 100644
--- a/arch/arm/mach-pxa/include/mach/reset.h
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -12,9 +12,8 @@ extern void clear_reset_status(unsigned int mask);
/**
* init_gpio_reset() - register GPIO as reset generator
- *
- * @gpio - gpio nr
- * @output - set gpio as out/low instead of input during normal work
+ * @gpio: gpio nr
+ * @output: set gpio as out/low instead of input during normal work
*/
extern int init_gpio_reset(int gpio, int output);
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 133e65d166b..2d5884ce043 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -70,6 +70,10 @@ static unsigned long ai_dword;
static unsigned long ai_multi;
static int ai_usermode;
+#define UM_WARN (1 << 0)
+#define UM_FIXUP (1 << 1)
+#define UM_SIGNAL (1 << 2)
+
#ifdef CONFIG_PROC_FS
static const char *usermode_action[] = {
"ignored",
@@ -754,7 +758,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
user:
ai_user += 1;
- if (ai_usermode & 1)
+ if (ai_usermode & UM_WARN)
printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx "
"Address=0x%08lx FSR 0x%03x\n", current->comm,
task_pid_nr(current), instrptr,
@@ -762,10 +766,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
thumb_mode(regs) ? tinstr : instr,
addr, fsr);
- if (ai_usermode & 2)
+ if (ai_usermode & UM_FIXUP)
goto fixup;
- if (ai_usermode & 4)
+ if (ai_usermode & UM_SIGNAL)
force_sig(SIGBUS, current);
else
set_cr(cr_no_alignment);
@@ -796,6 +800,22 @@ static int __init alignment_init(void)
res->write_proc = proc_alignment_write;
#endif
+ /*
+ * ARMv6 and later CPUs can perform unaligned accesses for
+ * most single load and store instructions up to word size.
+ * LDM, STM, LDRD and STRD still need to be handled.
+ *
+ * Ignoring the alignment fault is not an option on these
+ * CPUs since we spin re-faulting the instruction without
+ * making any progress.
+ */
+ if (cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U)) {
+ cr_alignment &= ~CR_A;
+ cr_no_alignment &= ~CR_A;
+ set_cr(cr_alignment);
+ ai_usermode = UM_FIXUP;
+ }
+
hook_fault_code(1, do_alignment, SIGILL, "alignment exception");
hook_fault_code(3, do_alignment, SIGILL, "alignment exception");
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 2df8d9facf5..22c9530e91e 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/mm.h>
+#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
index ec67fb42860..7b74d1255e0 100644
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -353,8 +353,8 @@ struct omapfb_device {
u32 pseudo_palette[17];
struct lcd_panel *panel; /* LCD panel */
- struct lcd_ctrl *ctrl; /* LCD controller */
- struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */
+ const struct lcd_ctrl *ctrl; /* LCD controller */
+ const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */
struct lcd_ctrl_extif *ext_if; /* LCD ctrl external
interface */
struct device *dev;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 9f9a921829c..dcd9d16da2e 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -255,7 +255,7 @@ void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
if (!_omap_sram_reprogram_clock)
omap_sram_error();
- return _omap_sram_reprogram_clock(dpllctl, ckctl);
+ _omap_sram_reprogram_clock(dpllctl, ckctl);
}
int __init omap1_sram_init(void)
@@ -282,8 +282,8 @@ void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
if (!_omap2_sram_ddr_init)
omap_sram_error();
- return _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
- base_cs, force_unlock);
+ _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
+ base_cs, force_unlock);
}
static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
@@ -294,7 +294,7 @@ void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
if (!_omap2_sram_reprogram_sdrc)
omap_sram_error();
- return _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
+ _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
}
static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index 883902fead8..d41d41d78ad 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -35,7 +35,7 @@
#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
-#define PCIE_CONF_FUNC(f) (((f) & 0x3) << 8)
+#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
#define PCIE_CONF_DATA_OFF 0x18fc
#define PCIE_MASK_OFF 0x1910
#define PCIE_CTRL_OFF 0x1a00
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index e05f9e1d3fa..27eb67604c5 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Mon Aug 4 15:38:01 2008
+# Linux kernel version: 2.6.28-rc7
+# Mon Dec 8 08:12:07 2008
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -26,6 +26,7 @@ CONFIG_LOG_BUF_SHIFT=20
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
@@ -46,7 +47,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -63,7 +63,9 @@ CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -72,15 +74,11 @@ CONFIG_SLUB=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -113,6 +111,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
@@ -125,8 +124,6 @@ CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -139,13 +136,16 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
CONFIG_AUDIT_ARCH=y
+# CONFIG_PARAVIRT_GUEST is not set
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_DIG_VTD is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_SGI_UV is not set
# CONFIG_IA64_HP_SIM is not set
+# CONFIG_IA64_XEN_GUEST is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
@@ -182,16 +182,17 @@ CONFIG_DISCONTIGMEM_MANUAL=y
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_MMU_NOTIFIER=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
@@ -231,12 +232,12 @@ CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
CONFIG_DMIID=y
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-# CONFIG_DMAR is not set
-
#
-# Power management and ACPI
+# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
@@ -248,7 +249,6 @@ CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
-# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
@@ -256,9 +256,7 @@ CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
@@ -275,7 +273,7 @@ CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
+CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HOTPLUG_PCI=m
@@ -286,6 +284,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HOTPLUG_PCI_SGI is not set
# CONFIG_PCCARD is not set
+CONFIG_DMAR=y
CONFIG_NET=y
#
@@ -333,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -353,11 +353,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
@@ -385,7 +384,7 @@ CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
+# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
@@ -419,10 +418,9 @@ CONFIG_SGI_XP=m
# CONFIG_HP_ILO is not set
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
@@ -430,12 +428,12 @@ CONFIG_BLK_DEV_IDE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
@@ -705,6 +703,9 @@ CONFIG_TULIP=m
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
@@ -725,11 +726,11 @@ CONFIG_E100=m
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
CONFIG_IGB=y
@@ -747,18 +748,22 @@ CONFIG_TIGON3=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
@@ -826,9 +831,11 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
@@ -942,15 +949,16 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=m
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -959,6 +967,8 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
@@ -1009,6 +1019,7 @@ CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@@ -1113,8 +1124,7 @@ CONFIG_HID=y
# USB Input Devices
#
CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
@@ -1122,6 +1132,34 @@ CONFIG_USB_HID=m
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1138,6 +1176,9 @@ CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
@@ -1155,6 +1196,12 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
#
# USB Device Class drivers
@@ -1162,13 +1209,14 @@ CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1191,7 +1239,6 @@ CONFIG_USB_STORAGE=m
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
@@ -1204,7 +1251,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1222,7 +1269,9 @@ CONFIG_USB_MON=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
@@ -1246,6 +1295,15 @@ CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
+
+#
+# HP Simulator drivers
+#
+# CONFIG_HP_SIMETH is not set
+# CONFIG_HP_SIMSERIAL is not set
+# CONFIG_HP_SIMSCSI is not set
CONFIG_MSPEC=m
#
@@ -1260,7 +1318,7 @@ CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
@@ -1271,6 +1329,7 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
@@ -1282,8 +1341,8 @@ CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
@@ -1314,6 +1373,7 @@ CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
@@ -1356,6 +1416,7 @@ CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1433,38 +1494,6 @@ CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_HAVE_KVM=y
-CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-
-#
-# HP Simulator drivers
-#
-# CONFIG_HP_SIMETH is not set
-# CONFIG_HP_SIMSERIAL is not set
-# CONFIG_HP_SIMSCSI is not set
#
# Kernel hacking
@@ -1503,8 +1532,19 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
@@ -1519,14 +1559,19 @@ CONFIG_SYSVIPC_COMPAT=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
@@ -1599,5 +1644,36 @@ CONFIG_CRYPTO_DES=m
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_HAVE_KVM=y
+CONFIG_VIRTUALIZATION=y
+# CONFIG_KVM is not set
+# CONFIG_VIRTIO_PCI is not set
+# CONFIG_VIRTIO_BALLOON is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_PER_CPU=y
diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig
index f92306bbedb..8d513a8c526 100644
--- a/arch/ia64/hp/sim/Kconfig
+++ b/arch/ia64/hp/sim/Kconfig
@@ -4,6 +4,7 @@ menu "HP Simulator drivers"
config HP_SIMETH
bool "Simulated Ethernet "
+ depends on NET
config HP_SIMSERIAL
bool "Simulated serial driver support"
diff --git a/arch/ia64/include/asm/paravirt_privop.h b/arch/ia64/include/asm/paravirt_privop.h
index 0b597424fcf..33c8e55f577 100644
--- a/arch/ia64/include/asm/paravirt_privop.h
+++ b/arch/ia64/include/asm/paravirt_privop.h
@@ -83,7 +83,6 @@ extern unsigned long ia64_native_getreg_func(int regnum);
#define paravirt_getreg(reg) \
({ \
unsigned long res; \
- BUILD_BUG_ON(!__builtin_constant_p(reg)); \
if ((reg) == _IA64_REG_IP) \
res = ia64_native_getreg(_IA64_REG_IP); \
else \
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 26228e2d01a..c75b914f2d6 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -53,10 +53,12 @@ int __ref arch_register_cpu(int num)
}
EXPORT_SYMBOL(arch_register_cpu);
-void arch_unregister_cpu(int num)
+void __ref arch_unregister_cpu(int num)
{
unregister_cpu(&sysfs_cpus[num].cpu);
+#ifdef CONFIG_ACPI
unmap_cpu_from_node(num, cpu_to_node(num));
+#endif
}
EXPORT_SYMBOL(arch_unregister_cpu);
#else
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 96c31b4180c..0c66dbdd1d7 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2000-2008 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/irq.h>
@@ -375,6 +375,7 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info)
int cpu = nasid_slice_to_cpuid(nasid, slice);
#ifdef CONFIG_SMP
int cpuphys;
+ irq_desc_t *desc;
#endif
pci_dev_get(pci_dev);
@@ -391,6 +392,12 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info)
#ifdef CONFIG_SMP
cpuphys = cpu_physical_id(cpu);
set_irq_affinity_info(sn_irq_info->irq_irq, cpuphys, 0);
+ desc = irq_to_desc(sn_irq_info->irq_irq);
+ /*
+ * Affinity was set by the PROM, prevent it from
+ * being reset by the request_irq() path.
+ */
+ desc->status |= IRQ_AFFINITY_SET;
#endif
}
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index bb1d2492964..02c5b8a9fb6 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -200,7 +200,7 @@ static int __cpuinitdata shub_1_1_found;
* Set flag for enabling shub specific wars
*/
-static inline int __init is_shub_1_1(int nasid)
+static inline int __cpuinit is_shub_1_1(int nasid)
{
unsigned long id;
int rev;
@@ -212,7 +212,7 @@ static inline int __init is_shub_1_1(int nasid)
return rev <= 2;
}
-static void __init sn_check_for_wars(void)
+static void __cpuinit sn_check_for_wars(void)
{
int cnode;
@@ -512,7 +512,6 @@ static void __init sn_init_pdas(char **cmdline_p)
for_each_online_node(cnode) {
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t));
- memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
memset(nodepdaindr[cnode]->phys_cpuid, -1,
sizeof(nodepdaindr[cnode]->phys_cpuid));
spin_lock_init(&nodepdaindr[cnode]->ptc_lock);
@@ -521,11 +520,9 @@ static void __init sn_init_pdas(char **cmdline_p)
/*
* Allocate & initialize nodepda for TIOs. For now, put them on node 0.
*/
- for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) {
+ for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++)
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t));
- memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
- }
/*
* Now copy the array of nodepda pointers to each nodepda.
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 765c8e287d2..364ca893880 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -48,7 +48,7 @@ config RUNTIME_DEBUG
help
If you say Y here, some debugging macros will do run-time checking.
If you say N here, those macros will mostly turn to no-ops. See
- include/asm-mips/debug.h for debuging macros.
+ arch/mips/include/asm/debug.h for debugging macros.
If unsure, say N.
endmenu
diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig
index 620980081a3..b6698a232ae 100644
--- a/arch/mips/configs/fulong_defconfig
+++ b/arch/mips/configs/fulong_defconfig
@@ -1,63 +1,78 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Mon Jun 11 00:23:51 2007
+# Linux kernel version: 2.6.28-rc6
+# Fri Nov 28 17:53:48 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_LEMOTE_FULONG=y
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+CONFIG_LEMOTE_FULONG=y
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
CONFIG_I8259=y
# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_HAVE_STD_PC_SERIAL_PORT=y
#
# CPU selection
@@ -75,6 +90,7 @@ CONFIG_CPU_LOONGSON2=y
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
@@ -101,7 +117,6 @@ CONFIG_BOARD_SCACHE=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_WB=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
@@ -109,6 +124,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -117,9 +133,17 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
@@ -133,37 +157,40 @@ CONFIG_HZ=250
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="lm32"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -175,6 +202,8 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -183,29 +212,33 @@ CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
@@ -219,19 +252,19 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_ISA=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -239,8 +272,9 @@ CONFIG_MMU=y
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
@@ -251,14 +285,12 @@ CONFIG_BINFMT_ELF32=y
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
CONFIG_NET=y
#
@@ -271,6 +303,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -294,18 +327,17 @@ CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
@@ -313,53 +345,59 @@ CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
@@ -371,6 +409,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -380,10 +419,6 @@ CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -392,23 +427,25 @@ CONFIG_NET_CLS_ROUTE=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_PHONET=m
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
# CONFIG_IEEE80211_CRYPT_CCMP is not set
# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
# CONFIG_RFKILL is not set
+CONFIG_NET_9P=m
+# CONFIG_NET_9P_DEBUG is not set
#
# Device Drivers
@@ -417,14 +454,13 @@ CONFIG_IEEE80211_CRYPT_WEP=m
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
@@ -443,6 +479,7 @@ CONFIG_MTD_BLOCK=m
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -482,6 +519,7 @@ CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x1fc00000
CONFIG_MTD_PHYSMAP_LEN=0x80000
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -506,21 +544,9 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -534,32 +560,28 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
@@ -568,24 +590,25 @@ CONFIG_IDE_PROC_FS=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
@@ -601,17 +624,28 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@@ -644,88 +678,30 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+CONFIG_VETH=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
@@ -740,29 +716,32 @@ CONFIG_CICADA_PHY=m
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
@@ -773,7 +752,6 @@ CONFIG_NET_PCI=y
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
@@ -785,15 +763,21 @@ CONFIG_8139TOO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -801,20 +785,29 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -822,6 +815,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -830,7 +824,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
@@ -844,25 +837,17 @@ CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -870,6 +855,7 @@ CONFIG_NET_FC=y
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -879,7 +865,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -900,9 +885,11 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
@@ -927,10 +914,13 @@ CONFIG_SERIO_LIBPS2=y
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -951,105 +941,152 @@ CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
#
-# I2C Algorithms
+# I2C Hardware Bus support
#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
#
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
@@ -1058,17 +1095,46 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_VIDEO_SH_MOBILE_CEU=m
CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
@@ -1079,7 +1145,6 @@ CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_W9968CF is not set
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
@@ -1088,6 +1153,8 @@ CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_ZR364XX is not set
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
@@ -1104,33 +1171,30 @@ CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
# CONFIG_USB_DSBR is not set
-# CONFIG_DVB_CORE is not set
+CONFIG_USB_SI470X=m
+CONFIG_USB_MR800=m
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
@@ -1158,16 +1222,30 @@ CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -1176,20 +1254,14 @@ CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@@ -1201,28 +1273,22 @@ CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_RTCTIMER=m
-CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
@@ -1231,10 +1297,12 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
@@ -1259,6 +1327,7 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
@@ -1276,43 +1345,26 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA MIPS devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_MIPS=y
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
@@ -1322,13 +1374,39 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_MOUSE is not set
#
-# USB support
-#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
@@ -1338,35 +1416,46 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
+CONFIG_USB_C67X00_HCD=m
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1379,7 +1468,9 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_LIBUSUAL=y
#
@@ -1387,15 +1478,10 @@ CONFIG_USB_LIBUSUAL=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1404,7 +1490,7 @@ CONFIG_USB_LIBUSUAL=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1421,56 +1507,75 @@ CONFIG_USB_LIBUSUAL=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_VST=m
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# RTC interfaces
#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
#
-# Real Time Clock
+# I2C RTC drivers
#
-# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
-# DMA Engine support
+# SPI RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
#
-# DMA Clients
+# Platform RTC drivers
#
+CONFIG_RTC_DRV_CMOS=m
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Devices
+# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -1478,27 +1583,31 @@ CONFIG_USB_LIBUSUAL=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
@@ -1530,11 +1639,11 @@ CONFIG_NTFS_RW=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1550,25 +1659,23 @@ CONFIG_RAMFS=y
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
@@ -1576,7 +1683,7 @@ CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1616,10 +1723,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
# CONFIG_NLS_CODEPAGE_437 is not set
@@ -1660,30 +1763,31 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+CONFIG_DYNAMIC_PRINTK_DEBUG=y
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
@@ -1691,64 +1795,113 @@ CONFIG_CMDLINE=""
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+CONFIG_CRYPTO=y
#
-# Cryptographic options
+# Crypto core or helper
#
-CONFIG_CRYPTO=y
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_LZO=m
#
-# Hardware crypto devices
+# Random Number Generation
#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
+CONFIG_CRC7=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index f719bf5e01a..11582287641 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -1,30 +1,34 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug 7 12:39:49 2007
+# Linux kernel version: 2.6.28-rc6
+# Fri Nov 28 15:41:33 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
CONFIG_SGI_IP22=y
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
@@ -35,34 +39,49 @@ CONFIG_SGI_IP22=y
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_ARC=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_I8259=y
# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
+CONFIG_SGI_HAS_INDYDOG=y
+CONFIG_SGI_HAS_HAL2=y
+CONFIG_SGI_HAS_SEEQ=y
+CONFIG_SGI_HAS_WD93=y
+CONFIG_SGI_HAS_ZILOG=y
+CONFIG_SGI_HAS_I8042=y
+CONFIG_DEFAULT_SGI_PARTITION=y
CONFIG_ARC32=y
CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_L1_CACHE_SHIFT=7
CONFIG_ARC_CONSOLE=y
CONFIG_ARC_PROMLIB=y
@@ -82,6 +101,7 @@ CONFIG_ARC_PROMLIB=y
# CONFIG_CPU_TX49XX is not set
CONFIG_CPU_R5000=y
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
@@ -115,18 +135,24 @@ CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
@@ -159,13 +185,20 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -177,6 +210,8 @@ CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -185,14 +220,21 @@ CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -203,6 +245,7 @@ CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -216,6 +259,8 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -224,29 +269,24 @@ CONFIG_HW_HAS_EISA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_EISA is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_I8253=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -259,6 +299,8 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
@@ -282,42 +324,13 @@ CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
@@ -334,12 +347,16 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
@@ -347,12 +364,12 @@ CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -366,18 +383,22 @@ CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -386,39 +407,75 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@@ -426,11 +483,13 @@ CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -439,32 +498,30 @@ CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
@@ -479,6 +536,7 @@ CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -488,12 +546,7 @@ CONFIG_SCTP_HMAC_MD5=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
#
# Queueing/Scheduling
@@ -502,7 +555,7 @@ CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
@@ -526,6 +579,7 @@ CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
@@ -533,35 +587,28 @@ CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_ACT_SKBEDIT=m
# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
+CONFIG_PHONET=m
CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
+# CONFIG_WIRELESS is not set
CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
# CONFIG_NET_9P is not set
@@ -588,7 +635,9 @@ CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -628,20 +677,22 @@ CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_SGIWD93_SCSI=y
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
+CONFIG_VETH=m
CONFIG_PHYLIB=m
#
@@ -656,11 +707,21 @@ CONFIG_CICADA_PHY=m
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=m
# CONFIG_AX88796 is not set
+CONFIG_SMC91X=m
# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
CONFIG_SGISEEQ=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -672,12 +733,12 @@ CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=m
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
+# CONFIG_IWLWIFI_LEDS is not set
CONFIG_HOSTAP=m
# CONFIG_HOSTAP_FIRMWARE is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -699,7 +760,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -720,6 +780,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_LIFEBOOK is not set
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
@@ -742,9 +803,11 @@ CONFIG_SERIO_RAW=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -761,6 +824,17 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=m
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -769,47 +843,50 @@ CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_INDYDOG=m
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_SSB_POSSIBLE=y
#
-# SPI support
+# Sonics Silicon Backplane
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -823,48 +900,77 @@ CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SGI_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+CONFIG_HID_PID=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
+CONFIG_RTC_DRV_DS1286=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -876,29 +982,33 @@ CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
@@ -929,11 +1039,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
@@ -949,27 +1059,25 @@ CONFIG_CONFIGFS_FS=m
CONFIG_EFS_FS=m
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
@@ -977,7 +1085,7 @@ CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -986,12 +1094,12 @@ CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
@@ -1015,10 +1123,6 @@ CONFIG_SGI_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
@@ -1059,30 +1163,32 @@ CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+CONFIG_DYNAMIC_PRINTK_DEBUG=y
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
@@ -1091,46 +1197,97 @@ CONFIG_CMDLINE=""
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
#
@@ -1139,12 +1296,15 @@ CONFIG_CRYPTO_CAMELLIA=m
CONFIG_BITREVERSE=m
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index fe4699df962..de4c7a0a96d 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -1,71 +1,71 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:33 2007
+# Linux kernel version: 2.6.28-rc7
+# Wed Dec 10 14:39:08 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
CONFIG_SGI_IP32=y
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_ARC=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
CONFIG_ARC32=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -75,6 +75,7 @@ CONFIG_ARC_PROMLIB=y
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
@@ -87,6 +88,7 @@ CONFIG_ARC_PROMLIB=y
# CONFIG_CPU_TX49XX is not set
CONFIG_CPU_R5000=y
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
@@ -116,65 +118,73 @@ CONFIG_RM7000_CPU_SCACHE=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
@@ -184,27 +194,43 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
@@ -213,59 +239,50 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_MIPS32_O32=y
-# CONFIG_MIPS32_N32 is not set
+CONFIG_MIPS32_N32=y
CONFIG_BINFMT_ELF32=y
#
# Power management options
#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -273,56 +290,83 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -332,10 +376,6 @@ CONFIG_NETWORK_SECMARK=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -343,15 +383,14 @@ CONFIG_NETWORK_SECMARK=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_SOFTMAC=y
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -360,60 +399,40 @@ CONFIG_WIRELESS_EXT=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=y
-
-#
-# Misc devices
-#
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -421,19 +440,20 @@ CONFIG_SGI_IOC4=y
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_CHR_DEV_OSST=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
@@ -443,35 +463,36 @@ CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=y
-# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -482,6 +503,7 @@ CONFIG_SCSI_AIC94XX=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -492,147 +514,81 @@ CONFIG_SCSI_AIC94XX=y
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
CONFIG_SGI_O2MACE_ETH=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=y
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=y
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=y
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -640,6 +596,7 @@ CONFIG_NETXEN_NIC=y
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -649,16 +606,32 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -669,8 +642,8 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_MACEPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_MACEPS2=y
+CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_GAMEPORT is not set
@@ -678,10 +651,13 @@ CONFIG_SERIO_RAW=y
# Character devices
#
CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -702,192 +678,304 @@ CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
+CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
#
-# I2C support
+# Watchdog Device Drivers
#
-# CONFIG_I2C is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
#
-# SPI support
+# PCI-based Watchdog Cards
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
#
-# CONFIG_W1 is not set
+# CONFIG_SSB is not set
#
-# Hardware Monitoring support
+# Multifunction device drivers
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
-# CONFIG_VIDEO_DEV is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia core support
#
-# CONFIG_DVB is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
#
-# Graphics support
+# Multimedia drivers
#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+CONFIG_DAB=y
#
-# Console display driver support
+# Graphics support
#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_GBE=y
+CONFIG_FB_GBE_MEM=4
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# HID Devices
+# Console display driver support
#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_SGI_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
+# Special HID drivers
#
+CONFIG_HID_COMPAT=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# RTC interfaces
#
+# CONFIG_RTC_INTF_SYSFS is not set
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# Real Time Clock
+# SPI RTC drivers
#
-# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
+# Platform RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@@ -896,11 +984,11 @@ CONFIG_GENERIC_ACL=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
#
@@ -916,33 +1004,42 @@ CONFIG_CONFIGFS_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -953,45 +1050,83 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=y
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
@@ -1000,51 +1135,99 @@ CONFIG_CMDLINE=""
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
#
-# Cryptographic options
+# Crypto core or helper
#
-CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CAMELLIA=y
+# CONFIG_CRYPTO_LZO is not set
#
-# Hardware crypto devices
+# Random Number Generation
#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
@@ -1052,10 +1235,15 @@ CONFIG_CRYPTO_CAMELLIA=y
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 74daa0cf87e..1ecdd3b65dc 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug 7 12:59:29 2007
+# Linux kernel version: 2.6.28-rc6
+# Mon Dec 1 08:08:19 2008
#
CONFIG_MIPS=y
@@ -11,20 +11,25 @@ CONFIG_MIPS=y
CONFIG_ZONE_DMA=y
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
CONFIG_MIPS_MALTA=y
# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
@@ -35,13 +40,14 @@ CONFIG_MIPS_MALTA=y
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -51,21 +57,26 @@ CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_BOOT_RAW=y
CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_HOTPLUG_CPU is not set
CONFIG_I8259=y
CONFIG_MIPS_BONITO64=y
CONFIG_MIPS_MSC=y
# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
+CONFIG_IRQ_GIC=y
+CONFIG_MIPS_BOARDS_GEN=y
CONFIG_PCI_GT64XXX_PCI0=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
@@ -74,10 +85,6 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
@@ -91,6 +98,7 @@ CONFIG_CPU_MIPS32_R2=y
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
@@ -108,6 +116,7 @@ CONFIG_CPU_MIPSR2=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
#
# Kernel type
@@ -125,6 +134,8 @@ CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_SMP=y
# CONFIG_MIPS_MT_SMTC is not set
CONFIG_MIPS_MT=y
+# CONFIG_SCHED_SMT is not set
+CONFIG_SYS_SUPPORTS_SCHED_SMT=y
CONFIG_SYS_SUPPORTS_MULTITHREADING=y
CONFIG_MIPS_MT_FPAFF=y
# CONFIG_MIPS_VPE_LOADER is not set
@@ -132,7 +143,6 @@ CONFIG_CPU_HAS_LLSC=y
# CONFIG_CPU_HAS_SMARTMIPS is not set
CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_SRS=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
@@ -140,22 +150,30 @@ CONFIG_IRQ_PER_CPU=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_SMARTMIPS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_SMP=y
+CONFIG_SMP_UP=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_NR_CPUS_DEFAULT_2=y
CONFIG_NR_CPUS=2
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
@@ -168,7 +186,6 @@ CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
# CONFIG_KEXEC is not set
CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
@@ -189,13 +206,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CPUSETS is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+CONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -207,6 +230,8 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -215,14 +240,23 @@ CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -234,6 +268,7 @@ CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -247,19 +282,19 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_MMU=y
CONFIG_I8253=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -267,6 +302,8 @@ CONFIG_I8253=y
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
@@ -274,12 +311,7 @@ CONFIG_TRAD_SIGNALS=y
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -292,6 +324,8 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
@@ -323,42 +357,13 @@ CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
@@ -375,11 +380,15 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
@@ -388,12 +397,12 @@ CONFIG_BRIDGE_NETFILTER=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -407,18 +416,22 @@ CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -427,40 +440,76 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@@ -468,11 +517,13 @@ CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -481,40 +532,34 @@ CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -523,6 +568,7 @@ CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -535,6 +581,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
@@ -544,8 +591,12 @@ CONFIG_IP_SCTP=m
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_GARP=m
CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
@@ -559,12 +610,7 @@ CONFIG_IPDDP_DECAP=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
#
# Queueing/Scheduling
@@ -573,7 +619,7 @@ CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
@@ -597,6 +643,7 @@ CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
@@ -604,37 +651,51 @@ CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
+CONFIG_PHONET=m
CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
+CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
#
@@ -644,9 +705,12 @@ CONFIG_RFKILL_INPUT=m
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=y
@@ -655,6 +719,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -667,6 +732,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=m
#
# RAM/ROM/Flash chip drivers
@@ -701,6 +767,7 @@ CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -748,25 +815,26 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
@@ -775,24 +843,25 @@ CONFIG_IDE_PROC_FS=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
@@ -808,10 +877,7 @@ CONFIG_BLK_DEV_IT8213=m
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
@@ -848,8 +914,10 @@ CONFIG_SCSI_WAIT_SCAN=m
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
@@ -866,6 +934,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -876,6 +945,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -887,6 +957,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
@@ -905,32 +976,28 @@ CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
#
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
+CONFIG_VETH=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
@@ -946,26 +1013,34 @@ CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
-# CONFIG_FIXED_PHY is not set
+CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_AX88796=m
+# CONFIG_AX88796_93CX6 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_TC35815=m
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
@@ -973,16 +1048,21 @@ CONFIG_TC35815=m
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -995,14 +1075,24 @@ CONFIG_NETDEV_1000=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -1022,6 +1112,7 @@ CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
@@ -1030,25 +1121,30 @@ CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PRISM54=m
+# CONFIG_RTL8180 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWL3945 is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
-CONFIG_BCM43XX=m
-CONFIG_BCM43XX_DEBUG=y
-CONFIG_BCM43XX_DMA=y
-CONFIG_BCM43XX_PIO=y
-CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
-# CONFIG_BCM43XX_DMA_MODE is not set
-# CONFIG_BCM43XX_PIO_MODE is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_RT2X00 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -1070,7 +1166,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -1099,10 +1194,13 @@ CONFIG_SERIO_SERPORT=y
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -1124,101 +1222,165 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
-CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
@@ -1230,9 +1392,8 @@ CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
@@ -1246,22 +1407,22 @@ CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
@@ -1291,11 +1452,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1312,46 +1473,48 @@ CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1365,10 +1528,6 @@ CONFIG_SUNRPC=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
@@ -1409,29 +1568,30 @@ CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
@@ -1439,51 +1599,103 @@ CONFIG_CMDLINE=""
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
@@ -1491,7 +1703,8 @@ CONFIG_CRYPTO_HW=y
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index 7a881755800..6c8342ae74d 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -35,6 +35,16 @@
mtc0 \reg, CP0_TCSTATUS
_ehb
.endm
+#elif defined(CONFIG_CPU_MIPSR2)
+ .macro local_irq_enable reg=t0
+ ei
+ irq_enable_hazard
+ .endm
+
+ .macro local_irq_disable reg=t0
+ di
+ irq_disable_hazard
+ .endm
#else
.macro local_irq_enable reg=t0
mfc0 \reg, CP0_STATUS
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 5510c53b7fe..053e4634ace 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -79,6 +79,11 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
/* We don't do dynamic PCI IRQ allocation */
}
+#define HAVE_PCI_MMAP
+
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine);
+
/*
* Dynamic DMA mapping stuff.
* MIPS has everything mapped statically.
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 759f68066b5..d0916a55cd7 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -262,14 +262,11 @@ bad_alignment:
LEAF(sys_syscall)
subu t0, a0, __NR_O32_Linux # check syscall number
sltiu v0, t0, __NR_O32_Linux_syscalls + 1
+ beqz t0, einval # do not recurse
sll t1, t0, 3
beqz v0, einval
-
lw t2, sys_call_table(t1) # syscall routine
- li v1, 4000 - __NR_O32_Linux # index of sys_syscall
- beq t0, v1, einval # do not recurse
-
/* Some syscalls like execve get their arguments from struct pt_regs
and claim zero arguments in the syscall table. Thus we have to
assume the worst case and shuffle around all potential arguments.
@@ -627,7 +624,7 @@ einval: li v0, -ENOSYS
sys sys_pselect6 6
sys sys_ppoll 5
sys sys_unshare 1
- sys sys_splice 4
+ sys sys_splice 6
sys sys_sync_file_range 7 /* 4305 */
sys sys_tee 4
sys sys_vmsplice 4
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index e266b3aa656..30f3b6317a8 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -390,7 +390,7 @@ EXPORT(sysn32_call_table)
PTR sys_splice
PTR sys_sync_file_range
PTR sys_tee
- PTR sys_vmsplice /* 6270 */
+ PTR compat_sys_vmsplice /* 6270 */
PTR sys_move_pages
PTR compat_sys_set_robust_list
PTR compat_sys_get_robust_list
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 6c7ef8313eb..fefef4af859 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -174,14 +174,12 @@ not_o32_scall:
END(handle_sys)
LEAF(sys32_syscall)
- sltu v0, a0, __NR_O32_Linux + __NR_O32_Linux_syscalls + 1
+ subu t0, a0, __NR_O32_Linux # check syscall number
+ sltiu v0, t0, __NR_O32_Linux_syscalls + 1
+ beqz t0, einval # do not recurse
+ dsll t1, t0, 3
beqz v0, einval
-
- dsll v0, a0, 3
- ld t2, (sys_call_table - (__NR_O32_Linux * 8))(v0)
-
- li v1, 4000 # indirect syscall number
- beq a0, v1, einval # do not recurse
+ ld t2, sys_call_table(t1) # syscall routine
move a0, a1 # shift argument registers
move a1, a2
@@ -198,7 +196,7 @@ LEAF(sys32_syscall)
jr t2
/* Unreached */
-einval: li v0, -EINVAL
+einval: li v0, -ENOSYS
jr ra
END(sys32_syscall)
@@ -512,7 +510,7 @@ sys_call_table:
PTR sys_splice
PTR sys32_sync_file_range /* 4305 */
PTR sys_tee
- PTR sys_vmsplice
+ PTR compat_sys_vmsplice
PTR compat_sys_move_pages
PTR compat_sys_set_robust_list
PTR compat_sys_get_robust_list /* 4310 */
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 972b2d2b840..a1b3da6bad5 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1134,7 +1134,7 @@ static int vpe_release(struct inode *inode, struct file *filp)
/* It's good to be able to run the SP and if it chokes have a look at
the /dev/rt?. But if we reset the pointer to the shared struct we
- loose what has happened. So perhaps if garbage is sent to the vpe
+ lose what has happened. So perhaps if garbage is sent to the vpe
device, use it as a trigger for the reset. Hopefully a nice
executable will be along shortly. */
if (ret < 0)
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 5b98d0e731c..e6708b3ad34 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -111,6 +111,7 @@ EXPORT_SYMBOL(dma_alloc_coherent);
void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
dma_addr_t dma_handle)
{
+ plat_unmap_dma_mem(dma_handle);
free_pages((unsigned long) vaddr, get_order(size));
}
@@ -121,6 +122,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
{
unsigned long addr = (unsigned long) vaddr;
+ plat_unmap_dma_mem(dma_handle);
+
if (!plat_device_is_coherent(dev))
addr = CAC_ADDR(addr);
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index cef2db8d222..32e847808df 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -7,9 +7,8 @@
#
obj-y := malta-amon.o malta-cmdline.o \
malta-display.o malta-init.o malta-int.o \
- malta-memory.o malta-mtd.o \
- malta-platform.o malta-reset.o \
- malta-setup.o malta-time.o
+ malta-memory.o malta-platform.o \
+ malta-reset.o malta-setup.o malta-time.o
obj-$(CONFIG_EARLY_PRINTK) += malta-console.o
obj-$(CONFIG_PCI) += malta-pci.o
diff --git a/arch/mips/mti-malta/malta-mtd.c b/arch/mips/mti-malta/malta-mtd.c
deleted file mode 100644
index 8ad9bdf25dc..00000000000
--- a/arch/mips/mti-malta/malta-mtd.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 MIPS Technologies, Inc.
- * written by Ralf Baechle <ralf@linux-mips.org>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <mtd/mtd-abi.h>
-
-static struct mtd_partition malta_mtd_partitions[] = {
- {
- .name = "YAMON",
- .offset = 0x0,
- .size = 0x100000,
- .mask_flags = MTD_WRITEABLE
- }, {
- .name = "User FS",
- .offset = 0x100000,
- .size = 0x2e0000
- }, {
- .name = "Board Config",
- .offset = 0x3e0000,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE
- }
-};
-
-static struct physmap_flash_data malta_flash_data = {
- .width = 4,
- .nr_parts = ARRAY_SIZE(malta_mtd_partitions),
- .parts = malta_mtd_partitions
-};
-
-static struct resource malta_flash_resource = {
- .start = 0x1e000000,
- .end = 0x1e3fffff,
- .flags = IORESOURCE_MEM
-};
-
-static struct platform_device malta_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &malta_flash_data,
- },
- .num_resources = 1,
- .resource = &malta_flash_resource,
-};
-
-static int __init malta_mtd_init(void)
-{
- platform_device_register(&malta_flash);
-
- return 0;
-}
-
-module_init(malta_mtd_init)
diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c
index 83b9bab3cd3..72e32a7715b 100644
--- a/arch/mips/mti-malta/malta-platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
@@ -3,10 +3,14 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2006, 07 MIPS Technologies, Inc.
* written by Ralf Baechle (ralf@linux-mips.org)
+ * written by Ralf Baechle <ralf@linux-mips.org>
*
- * Probe driver for the Malta's UART ports:
+ * Copyright (C) 2008 Wind River Systems, Inc.
+ * updated by Tiejun Chen <tiejun.chen@windriver.com>
+ *
+ * 1. Probe driver for the Malta's UART ports:
*
* o 2 ports in the SMC SuperIO
* o 1 port in the CBUS UART, a discrete 16550 which normally is only used
@@ -14,10 +18,17 @@
*
* We don't use 8250_platform.c on Malta as it would result in the CBUS
* UART becoming ttyS0.
+ *
+ * 2. Register RTC-CMOS platform device on Malta.
*/
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/serial_8250.h>
+#include <linux/mc146818rtc.h>
+#include <linux/module.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <mtd/mtd-abi.h>
#define SMC_PORT(base, int) \
{ \
@@ -45,21 +56,93 @@ static struct plat_serial8250_port uart8250_data[] = {
{ },
};
-static struct platform_device uart8250_device = {
+static struct platform_device malta_uart8250_device = {
.name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM2,
+ .id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = uart8250_data,
},
};
-static int __init uart8250_init(void)
+struct resource malta_rtc_resources[] = {
+ {
+ .start = RTC_PORT(0),
+ .end = RTC_PORT(7),
+ .flags = IORESOURCE_IO,
+ }, {
+ .start = RTC_IRQ,
+ .end = RTC_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device malta_rtc_device = {
+ .name = "rtc_cmos",
+ .id = -1,
+ .resource = malta_rtc_resources,
+ .num_resources = ARRAY_SIZE(malta_rtc_resources),
+};
+
+static struct mtd_partition malta_mtd_partitions[] = {
+ {
+ .name = "YAMON",
+ .offset = 0x0,
+ .size = 0x100000,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "User FS",
+ .offset = 0x100000,
+ .size = 0x2e0000
+ }, {
+ .name = "Board Config",
+ .offset = 0x3e0000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE
+ }
+};
+
+static struct physmap_flash_data malta_flash_data = {
+ .width = 4,
+ .nr_parts = ARRAY_SIZE(malta_mtd_partitions),
+ .parts = malta_mtd_partitions
+};
+
+static struct resource malta_flash_resource = {
+ .start = 0x1e000000,
+ .end = 0x1e3fffff,
+ .flags = IORESOURCE_MEM
+};
+
+static struct platform_device malta_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &malta_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &malta_flash_resource,
+};
+
+static struct platform_device *malta_devices[] __initdata = {
+ &malta_uart8250_device,
+ &malta_rtc_device,
+ &malta_flash_device,
+};
+
+static int __init malta_add_devices(void)
{
- return platform_device_register(&uart8250_device);
-}
+ int err;
-module_init(uart8250_init);
+ err = platform_add_devices(malta_devices, ARRAY_SIZE(malta_devices));
+ if (err)
+ return err;
+
+ /*
+ * Set RTC to BCD mode to support current alarm code.
+ */
+ CMOS_WRITE(CMOS_READ(RTC_CONTROL) & ~RTC_DM_BINARY, RTC_CONTROL);
+
+ return 0;
+}
-MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the Malta CBUS UART");
+device_initcall(malta_add_devices);
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index a377e9d2d02..62cae740e25 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -354,6 +354,30 @@ EXPORT_SYMBOL(PCIBIOS_MIN_IO);
EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
#endif
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine)
+{
+ unsigned long prot;
+
+ /*
+ * I/O space can be accessed via normal processor loads and stores on
+ * this platform but for now we elect not to do this and portable
+ * drivers should not do this anyway.
+ */
+ if (mmap_state == pci_mmap_io)
+ return -EINVAL;
+
+ /*
+ * Ignore write-combine; for now only return uncached mappings.
+ */
+ prot = pgprot_val(vma->vm_page_prot);
+ prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED;
+ vma->vm_page_prot = __pgprot(prot);
+
+ return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+ vma->vm_end - vma->vm_start, vma->vm_page_prot);
+}
+
char * (*pcibios_plat_setup)(char *str) __devinitdata;
char *__devinit pcibios_setup(char *str)
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index b7cbb1487af..62fba8aa9b6 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -180,6 +180,7 @@ ENTRY(resume_userspace)
#ifdef CONFIG_PREEMPT
ENTRY(resume_kernel)
+ __cli
mov (TI_preempt_count,a2),d0 # non-zero preempt_count ?
cmp 0,d0
bne restore_all
@@ -190,7 +191,7 @@ need_resched:
mov (REG_EPSW,fp),d0
and EPSW_IM,d0
cmp EPSW_IM_7,d0 # interrupts off (exception path) ?
- beq restore_all
+ bne restore_all
call preempt_schedule_irq[],0
jmp need_resched
#endif
diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c
index 9a6d4e8ebe7..11584c51acd 100644
--- a/arch/mn10300/kernel/gdb-io-serial.c
+++ b/arch/mn10300/kernel/gdb-io-serial.c
@@ -99,6 +99,7 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
try_again:
/* pull chars out of the buffer */
ix = gdbstub_rx_outp;
+ barrier();
if (ix == gdbstub_rx_inp) {
if (nonblock)
return -EAGAIN;
@@ -110,6 +111,7 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
ch = gdbstub_rx_buffer[ix++];
st = gdbstub_rx_buffer[ix++];
+ barrier();
gdbstub_rx_outp = ix & 0x00000fff;
if (st & UART_LSR_BI) {
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index aa07d0cd190..59b9c4bf958 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -566,6 +566,11 @@ static void mn10300_serial_transmit_interrupt(struct mn10300_serial_port *port)
{
_enter("%s", port->name);
+ if (!port->uart.info || !port->uart.info->port.tty) {
+ mn10300_serial_dis_tx_intr(port);
+ return;
+ }
+
if (uart_tx_stopped(&port->uart) ||
uart_circ_empty(&port->uart.info->xmit))
mn10300_serial_dis_tx_intr(port);
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
index 017121ce896..e1d88ab5100 100644
--- a/arch/mn10300/kernel/setup.c
+++ b/arch/mn10300/kernel/setup.c
@@ -161,7 +161,7 @@ void __init setup_arch(char **cmdline_p)
reserve the page it is occupying. */
if (CONFIG_INTERRUPT_VECTOR_BASE >= CONFIG_KERNEL_RAM_BASE_ADDRESS &&
CONFIG_INTERRUPT_VECTOR_BASE < memory_end)
- reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, 1,
+ reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, PAGE_SIZE,
BOOTMEM_DEFAULT);
reserve_bootmem(PAGE_ALIGN(PFN_PHYS(free_pfn)), bootmap_size,
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index a3e80f444f5..b8259668f7d 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -11,6 +11,7 @@
#define __VMLINUX_LDS__
#include <asm-generic/vmlinux.lds.h>
#include <asm/thread_info.h>
+#include <asm/page.h>
OUTPUT_FORMAT("elf32-am33lin", "elf32-am33lin", "elf32-am33lin")
OUTPUT_ARCH(mn10300)
@@ -55,13 +56,13 @@ SECTIONS
CONSTRUCTORS
}
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__nosave_begin = .;
.data_nosave : { *(.data.nosave) }
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__nosave_end = .;
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.data.page_aligned : { *(.data.idt) }
. = ALIGN(32);
@@ -78,7 +79,7 @@ SECTIONS
.data.init_task : { *(.data.init_task) }
/* might get freed after init */
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
__smp_locks = .;
*(.smp_locks)
@@ -86,7 +87,7 @@ SECTIONS
}
/* will be freed after init */
- . = ALIGN(4096); /* Init code and data */
+ . = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
.init.text : {
_sinittext = .;
@@ -120,17 +121,14 @@ SECTIONS
.exit.data : { *(.exit.data) }
#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
__initramfs_end = .;
#endif
- . = ALIGN(32);
- __per_cpu_start = .;
- .data.percpu : { *(.data.percpu) }
- __per_cpu_end = .;
- . = ALIGN(4096);
+ PERCPU(32)
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
/* freed after init ends here */
@@ -145,7 +143,7 @@ SECTIONS
_end = . ;
/* This is where the kernel creates the early boot page tables */
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
pg0 = .;
/* Sections to be discarded */
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 8fc6d72849a..3d3daa67429 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -41,6 +41,7 @@ $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 2c9d54a35bc..4bdbaf4993a 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -91,6 +91,14 @@
interrupts = <18 0x8>;
interrupt-parent = <&ipic>;
};
+
+ mcu_pio: mcu@a {
+ #gpio-cells = <2>;
+ compatible = "fsl,mc9s08qg8-mpc8349emitx",
+ "fsl,mcu-mpc8349emitx";
+ reg = <0x0a>;
+ gpio-controller;
+ };
};
spi@7000 {
@@ -139,14 +147,6 @@
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
-
- mcu_pio: mcu@a {
- #gpio-cells = <2>;
- compatible = "fsl,mc9s08qg8-mpc8349emitx",
- "fsl,mcu-mpc8349emitx";
- reg = <0x0a>;
- gpio-controller;
- };
};
usb@22000 {
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index e55ff7c47a3..07a674f5344 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -723,7 +723,7 @@ CONFIG_CICADA_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 15eb30c9b3f..d582014b0a3 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -682,7 +682,7 @@ CONFIG_VITESSE_PHY=y
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index 31c18b52aff..10b4ab1008a 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -40,6 +40,7 @@ _GLOBAL(__setup_cpu_460gt)
mtlr r4
blr
+_GLOBAL(__setup_cpu_440x5)
_GLOBAL(__setup_cpu_440gx)
_GLOBAL(__setup_cpu_440spe)
b __fixup_440A_mcheck
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index b1eb834bc0f..7e8719504f3 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -39,6 +39,7 @@ extern void __setup_cpu_440epx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_440x5(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
@@ -1500,6 +1501,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_user_features = COMMON_USER_BOOKE,
.icache_bsize = 32,
.dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_440x5,
+ .machine_check = machine_check_440A,
.platform = "ppc440",
},
{ /* 460EX */
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 1562daf8839..3a6eaa876ee 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -75,6 +75,7 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
for_each_sg(sgl, sg, nents, i) {
sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
sg->dma_length = sg->length;
+ __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
}
return nents;
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index bdc8b0e860e..d108715129e 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -479,6 +479,8 @@ _GLOBAL(_tlbil_pid)
* (no broadcast)
*/
_GLOBAL(_tlbil_va)
+ mfmsr r10
+ wrteei 0
slwi r4,r4,16
mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
tlbsx 0,r3
@@ -490,6 +492,7 @@ _GLOBAL(_tlbil_va)
tlbwe
msync
isync
+ wrtee r10
blr
#endif /* CONFIG_FSL_BOOKE */
diff --git a/arch/sparc/include/asm/bitops_32.h b/arch/sparc/include/asm/bitops_32.h
index 68b98a7e645..9cf4ae0cd7b 100644
--- a/arch/sparc/include/asm/bitops_32.h
+++ b/arch/sparc/include/asm/bitops_32.h
@@ -98,6 +98,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
#include <asm-generic/bitops/sched.h>
#include <asm-generic/bitops/ffs.h>
#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
#include <asm-generic/bitops/fls64.h>
#include <asm-generic/bitops/hweight.h>
#include <asm-generic/bitops/lock.h>
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index f43adbc773c..a941c610e7c 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -1014,7 +1014,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
break;
case PTRACE_SETFPREGS64:
- ret = copy_regset_to_user(child, view, REGSET_FP,
+ ret = copy_regset_from_user(child, view, REGSET_FP,
0 * sizeof(u64),
33 * sizeof(u64),
fps);
diff --git a/arch/sparc64/kernel/visemul.c b/arch/sparc64/kernel/visemul.c
index 9e05cb5cb85..b956fd71c13 100644
--- a/arch/sparc64/kernel/visemul.c
+++ b/arch/sparc64/kernel/visemul.c
@@ -131,7 +131,7 @@
#define VIS_OPF_SHIFT 5
#define VIS_OPF_MASK (0x1ff << VIS_OPF_SHIFT)
-#define RS1(INSN) (((INSN) >> 24) & 0x1f)
+#define RS1(INSN) (((INSN) >> 14) & 0x1f)
#define RS2(INSN) (((INSN) >> 0) & 0x1f)
#define RD(INSN) (((INSN) >> 25) & 0x1f)
@@ -445,7 +445,7 @@ static void pdist(struct pt_regs *regs, unsigned int insn)
unsigned long i;
rs1 = fpd_regval(f, RS1(insn));
- rs2 = fpd_regval(f, RS1(insn));
+ rs2 = fpd_regval(f, RS2(insn));
rd = fpd_regaddr(f, RD(insn));
rd_val = *rd;
@@ -807,6 +807,8 @@ int vis_emul(struct pt_regs *regs, unsigned int insn)
if (get_user(insn, (u32 __user *) pc))
return -EFAULT;
+ save_and_clear_fpu();
+
opf = (insn & VIS_OPF_MASK) >> VIS_OPF_SHIFT;
switch (opf) {
default:
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 19d579d74d2..8f44ebb0dec 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -16,6 +16,8 @@
#include <linux/slab.h>
#include <linux/syscalls.h>
#include <linux/utsname.h>
+#include <linux/socket.h>
+#include <linux/un.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
@@ -785,7 +787,7 @@ static int __init mconsole_init(void)
/* long to avoid size mismatch warnings from gcc */
long sock;
int err;
- char file[256];
+ char file[UNIX_PATH_MAX];
if (umid_file_name("mconsole", file, sizeof(file)))
return -1;
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 1a30c0440c6..ac302a2fa33 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -251,13 +251,6 @@ struct amd_iommu {
/* Pointer to PCI device of this IOMMU */
struct pci_dev *dev;
- /*
- * Capability pointer. There could be more than one IOMMU per PCI
- * device function if there are more than one AMD IOMMU capability
- * pointers.
- */
- u16 cap_ptr;
-
/* physical address of MMIO space */
u64 mmio_phys;
/* virtual address of MMIO space */
@@ -266,6 +259,13 @@ struct amd_iommu {
/* capabilities of that IOMMU read from ACPI */
u32 cap;
+ /*
+ * Capability pointer. There could be more than one IOMMU per PCI
+ * device function if there are more than one AMD IOMMU capability
+ * pointers.
+ */
+ u16 cap_ptr;
+
/* pci domain of this IOMMU */
u16 pci_seg;
@@ -284,19 +284,19 @@ struct amd_iommu {
/* size of command buffer */
u32 cmd_buf_size;
- /* event buffer virtual address */
- u8 *evt_buf;
/* size of event buffer */
u32 evt_buf_size;
+ /* event buffer virtual address */
+ u8 *evt_buf;
/* MSI number for event interrupt */
u16 evt_msi_num;
- /* if one, we need to send a completion wait command */
- int need_sync;
-
/* true if interrupts for this IOMMU are already enabled */
bool int_enabled;
+ /* if one, we need to send a completion wait command */
+ int need_sync;
+
/* default dma_ops domain for that IOMMU */
struct dma_ops_domain *default_dom;
};
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index 7f225a4b2a2..097794ff6b7 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -71,15 +71,13 @@ static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
/* Make sure we keep the same behaviour */
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
-#ifdef CONFIG_X86_32
- return 0;
-#else
+#ifdef CONFIG_X86_64
struct dma_mapping_ops *ops = get_dma_ops(dev);
if (ops->mapping_error)
return ops->mapping_error(dev, dma_addr);
- return (dma_addr == bad_dma_address);
#endif
+ return (dma_addr == bad_dma_address);
}
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 4850e4b02b6..ff386ff50ed 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -239,7 +239,7 @@ struct pci_bus;
void set_pci_bus_resources_arch_default(struct pci_bus *b);
#ifdef CONFIG_SMP
-#define mc_capable() (boot_cpu_data.x86_max_cores > 1)
+#define mc_capable() (cpus_weight(per_cpu(cpu_core_map, 0)) != nr_cpu_ids)
#define smt_capable() (smp_num_siblings > 1)
#endif
diff --git a/arch/x86/include/asm/vmi.h b/arch/x86/include/asm/vmi.h
index b7c0dea119f..61e08c0a290 100644
--- a/arch/x86/include/asm/vmi.h
+++ b/arch/x86/include/asm/vmi.h
@@ -223,9 +223,15 @@ struct pci_header {
} __attribute__((packed));
/* Function prototypes for bootstrapping */
+#ifdef CONFIG_VMI
extern void vmi_init(void);
+extern void vmi_activate(void);
extern void vmi_bringup(void);
-extern void vmi_apply_boot_page_allocations(void);
+#else
+static inline void vmi_init(void) {}
+static inline void vmi_activate(void) {}
+static inline void vmi_bringup(void) {}
+#endif
/* State needed to start an application processor in an SMP system. */
struct vmi_ap_state {
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index e4899e0e878..a7b6dec6fc3 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -187,6 +187,8 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
spin_lock_irqsave(&iommu->lock, flags);
ret = __iommu_queue_command(iommu, cmd);
+ if (!ret)
+ iommu->need_sync = 1;
spin_unlock_irqrestore(&iommu->lock, flags);
return ret;
@@ -210,10 +212,13 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
- iommu->need_sync = 0;
-
spin_lock_irqsave(&iommu->lock, flags);
+ if (!iommu->need_sync)
+ goto out;
+
+ iommu->need_sync = 0;
+
ret = __iommu_queue_command(iommu, &cmd);
if (ret)
@@ -254,8 +259,6 @@ static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
ret = iommu_queue_command(iommu, &cmd);
- iommu->need_sync = 1;
-
return ret;
}
@@ -281,8 +284,6 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
ret = iommu_queue_command(iommu, &cmd);
- iommu->need_sync = 1;
-
return ret;
}
@@ -343,7 +344,7 @@ static int iommu_map(struct protection_domain *dom,
u64 __pte, *pte, *page;
bus_addr = PAGE_ALIGN(bus_addr);
- phys_addr = PAGE_ALIGN(bus_addr);
+ phys_addr = PAGE_ALIGN(phys_addr);
/* only support 512GB address spaces for now */
if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK))
@@ -599,7 +600,7 @@ static void dma_ops_free_pagetable(struct dma_ops_domain *dma_dom)
continue;
p2 = IOMMU_PTE_PAGE(p1[i]);
- for (j = 0; j < 512; ++i) {
+ for (j = 0; j < 512; ++j) {
if (!IOMMU_PTE_PRESENT(p2[j]))
continue;
p3 = IOMMU_PTE_PAGE(p2[j]);
@@ -762,8 +763,6 @@ static void set_device_domain(struct amd_iommu *iommu,
write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
iommu_queue_inv_dev_entry(iommu, devid);
-
- iommu->need_sync = 1;
}
/*****************************************************************************
@@ -858,6 +857,9 @@ static int get_device_resources(struct device *dev,
print_devid(_bdf, 1);
}
+ if (domain_for_device(_bdf) == NULL)
+ set_device_domain(*iommu, *domain, _bdf);
+
return 1;
}
@@ -908,7 +910,7 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu,
if (address >= dom->aperture_size)
return;
- WARN_ON(address & 0xfffULL || address > dom->aperture_size);
+ WARN_ON(address & ~PAGE_MASK || address >= dom->aperture_size);
pte = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)];
pte += IOMMU_PTE_L0_INDEX(address);
@@ -920,8 +922,8 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu,
/*
* This function contains common code for mapping of a physically
- * contiguous memory region into DMA address space. It is uses by all
- * mapping functions provided by this IOMMU driver.
+ * contiguous memory region into DMA address space. It is used by all
+ * mapping functions provided with this IOMMU driver.
* Must be called with the domain lock held.
*/
static dma_addr_t __map_single(struct device *dev,
@@ -981,7 +983,8 @@ static void __unmap_single(struct amd_iommu *iommu,
dma_addr_t i, start;
unsigned int pages;
- if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size))
+ if ((dma_addr == bad_dma_address) ||
+ (dma_addr + size > dma_dom->aperture_size))
return;
pages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
@@ -1031,8 +1034,7 @@ static dma_addr_t map_single(struct device *dev, phys_addr_t paddr,
if (addr == bad_dma_address)
goto out;
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
out:
spin_unlock_irqrestore(&domain->lock, flags);
@@ -1060,8 +1062,7 @@ static void unmap_single(struct device *dev, dma_addr_t dma_addr,
__unmap_single(iommu, domain->priv, dma_addr, size, dir);
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
spin_unlock_irqrestore(&domain->lock, flags);
}
@@ -1127,8 +1128,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
goto unmap;
}
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
out:
spin_unlock_irqrestore(&domain->lock, flags);
@@ -1173,8 +1173,7 @@ static void unmap_sg(struct device *dev, struct scatterlist *sglist,
s->dma_address = s->dma_length = 0;
}
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
spin_unlock_irqrestore(&domain->lock, flags);
}
@@ -1225,8 +1224,7 @@ static void *alloc_coherent(struct device *dev, size_t size,
goto out;
}
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
out:
spin_unlock_irqrestore(&domain->lock, flags);
@@ -1257,8 +1255,7 @@ static void free_coherent(struct device *dev, size_t size,
__unmap_single(iommu, domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
spin_unlock_irqrestore(&domain->lock, flags);
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index f98f4e1dba0..0f4c1fd5a1f 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -604,6 +604,9 @@ static void __init __get_smp_config(unsigned int early)
printk(KERN_INFO "Using ACPI for processor (LAPIC) "
"configuration information\n");
+ if (!mpf)
+ return;
+
printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
mpf->mpf_specification);
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
diff --git a/arch/x86/kernel/paravirt-spinlocks.c b/arch/x86/kernel/paravirt-spinlocks.c
index 0e9f1982b1d..95777b0faa7 100644
--- a/arch/x86/kernel/paravirt-spinlocks.c
+++ b/arch/x86/kernel/paravirt-spinlocks.c
@@ -7,7 +7,8 @@
#include <asm/paravirt.h>
-static void default_spin_lock_flags(struct raw_spinlock *lock, unsigned long flags)
+static inline void
+default_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
{
__raw_spin_lock(lock);
}
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index a42b02b4df6..ba7ad83e20a 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -123,6 +123,8 @@ static void free_iommu(unsigned long offset, int size)
spin_lock_irqsave(&iommu_bitmap_lock, flags);
iommu_area_free(iommu_gart_bitmap, offset, size);
+ if (offset >= next_bit)
+ next_bit = offset + size;
spin_unlock_irqrestore(&iommu_bitmap_lock, flags);
}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 9d5674f7b6c..bdec76e5559 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -794,6 +794,9 @@ void __init setup_arch(char **cmdline_p)
printk(KERN_INFO "Command line: %s\n", boot_command_line);
#endif
+ /* VMI may relocate the fixmap; do this before touching ioremap area */
+ vmi_init();
+
early_cpu_init();
early_ioremap_init();
@@ -880,13 +883,8 @@ void __init setup_arch(char **cmdline_p)
check_efer();
#endif
-#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
- /*
- * Must be before kernel pagetables are setup
- * or fixmap area is touched.
- */
- vmi_init();
-#endif
+ /* Must be before kernel pagetables are setup */
+ vmi_activate();
/* after early param, so could get panic from serial */
reserve_early_setup_data();
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 7b109339731..f71f96fc9e6 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -294,9 +294,7 @@ static void __cpuinit start_secondary(void *unused)
* fragile that we want to limit the things done here to the
* most necessary things.
*/
-#ifdef CONFIG_VMI
vmi_bringup();
-#endif
cpu_init();
preempt_disable();
smp_callin();
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 8b6c393ab9f..22fd6577156 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -960,8 +960,6 @@ static inline int __init activate_vmi(void)
void __init vmi_init(void)
{
- unsigned long flags;
-
if (!vmi_rom)
probe_vmi_rom();
else
@@ -973,13 +971,21 @@ void __init vmi_init(void)
reserve_top_address(-vmi_rom->virtual_top);
- local_irq_save(flags);
- activate_vmi();
-
#ifdef CONFIG_X86_IO_APIC
/* This is virtual hardware; timer routing is wired correctly */
no_timer_check = 1;
#endif
+}
+
+void vmi_activate(void)
+{
+ unsigned long flags;
+
+ if (!vmi_rom)
+ return;
+
+ local_irq_save(flags);
+ activate_vmi();
local_irq_restore(flags & X86_EFLAGS_IF);
}
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 022cd41ea9b..202864ad49a 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -401,14 +401,13 @@ static int __init ppro_init(char **cpu_type)
*cpu_type = "i386/pii";
break;
case 6 ... 8:
+ case 10 ... 11:
*cpu_type = "i386/piii";
break;
case 9:
+ case 13:
*cpu_type = "i386/p6_mobile";
break;
- case 10 ... 13:
- *cpu_type = "i386/p6";
- break;
case 14:
*cpu_type = "i386/core";
break;
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 716d26f0e5d..e9f80c744cf 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -156,6 +156,8 @@ static void ppro_start(struct op_msrs const * const msrs)
unsigned int low, high;
int i;
+ if (!reset_value)
+ return;
for (i = 0; i < num_counters; ++i) {
if (reset_value[i]) {
CTRL_READ(low, high, msrs, i);
@@ -171,6 +173,8 @@ static void ppro_stop(struct op_msrs const * const msrs)
unsigned int low, high;
int i;
+ if (!reset_value)
+ return;
for (i = 0; i < num_counters; ++i) {
if (!reset_value[i])
continue;
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index 5c99ff8d2db..6e72d661ae4 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -161,7 +161,7 @@ static inline struct request *start_ordered(struct request_queue *q,
/*
* Prep proxy barrier request.
*/
- blkdev_dequeue_request(rq);
+ elv_dequeue_request(q, rq);
q->orig_bar_rq = rq;
rq = &q->bar_rq;
blk_rq_init(q, rq);
@@ -219,7 +219,7 @@ int blk_do_ordered(struct request_queue *q, struct request **rqp)
* This can happen when the queue switches to
* ORDERED_NONE while this request is on it.
*/
- blkdev_dequeue_request(rq);
+ elv_dequeue_request(q, rq);
if (__blk_end_request(rq, -EOPNOTSUPP,
blk_rq_bytes(rq)))
BUG();
diff --git a/block/blk-core.c b/block/blk-core.c
index 10e8a64a5a5..c36aa98fafa 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -592,7 +592,7 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
1 << QUEUE_FLAG_STACKABLE);
q->queue_lock = lock;
- blk_queue_segment_boundary(q, 0xffffffff);
+ blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK);
blk_queue_make_request(q, __make_request);
blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
@@ -1637,6 +1637,28 @@ int blk_insert_cloned_request(struct request_queue *q, struct request *rq)
EXPORT_SYMBOL_GPL(blk_insert_cloned_request);
/**
+ * blkdev_dequeue_request - dequeue request and start timeout timer
+ * @req: request to dequeue
+ *
+ * Dequeue @req and start timeout timer on it. This hands off the
+ * request to the driver.
+ *
+ * Block internal functions which don't want to start timer should
+ * call elv_dequeue_request().
+ */
+void blkdev_dequeue_request(struct request *req)
+{
+ elv_dequeue_request(req->q, req);
+
+ /*
+ * We are now handing the request to the hardware, add the
+ * timeout handler.
+ */
+ blk_add_timer(req);
+}
+EXPORT_SYMBOL(blkdev_dequeue_request);
+
+/**
* __end_that_request_first - end I/O on a request
* @req: the request being processed
* @error: %0 for success, < %0 for error
@@ -1774,7 +1796,7 @@ static void end_that_request_last(struct request *req, int error)
blk_queue_end_tag(req->q, req);
if (blk_queued_rq(req))
- blkdev_dequeue_request(req);
+ elv_dequeue_request(req->q, req);
if (unlikely(laptop_mode) && blk_fs_request(req))
laptop_io_completion();
diff --git a/block/blk-map.c b/block/blk-map.c
index 0f4b4b88181..2990447f45e 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -224,7 +224,7 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq,
*/
bio_get(bio);
bio_endio(bio, 0);
- bio_unmap_user(bio);
+ __blk_rq_unmap_user(bio);
return -EINVAL;
}
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 41392fbe19f..afa55e14e27 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -125,6 +125,9 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
q->nr_requests = BLKDEV_MAX_RQ;
blk_queue_max_phys_segments(q, MAX_PHYS_SEGMENTS);
blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS);
+ blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK);
+ blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
+
q->make_request_fn = mfn;
q->backing_dev_info.ra_pages =
(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
@@ -314,6 +317,7 @@ void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b)
/* zero is "infinity" */
t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
+ t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask, b->seg_boundary_mask);
t->max_phys_segments = min(t->max_phys_segments, b->max_phys_segments);
t->max_hw_segments = min(t->max_hw_segments, b->max_hw_segments);
diff --git a/block/bsg.c b/block/bsg.c
index e8bd2475682..e73e50daf3d 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -202,6 +202,8 @@ static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
rq->timeout = q->sg_timeout;
if (!rq->timeout)
rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
+ if (rq->timeout < BLK_MIN_SG_TIMEOUT)
+ rq->timeout = BLK_MIN_SG_TIMEOUT;
return 0;
}
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index 3d3e7a46f38..67eb93cff69 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -677,6 +677,29 @@ static int compat_blkdev_driver_ioctl(struct block_device *bdev, fmode_t mode,
case DVD_WRITE_STRUCT:
case DVD_AUTH:
arg = (unsigned long)compat_ptr(arg);
+ /* These intepret arg as an unsigned long, not as a pointer,
+ * so we must not do compat_ptr() conversion. */
+ case HDIO_SET_MULTCOUNT:
+ case HDIO_SET_UNMASKINTR:
+ case HDIO_SET_KEEPSETTINGS:
+ case HDIO_SET_32BIT:
+ case HDIO_SET_NOWERR:
+ case HDIO_SET_DMA:
+ case HDIO_SET_PIO_MODE:
+ case HDIO_SET_NICE:
+ case HDIO_SET_WCACHE:
+ case HDIO_SET_ACOUSTIC:
+ case HDIO_SET_BUSSTATE:
+ case HDIO_SET_ADDRESS:
+ case CDROMEJECT_SW:
+ case CDROM_SET_OPTIONS:
+ case CDROM_CLEAR_OPTIONS:
+ case CDROM_SELECT_SPEED:
+ case CDROM_SELECT_DISC:
+ case CDROM_MEDIA_CHANGED:
+ case CDROM_DRIVE_STATUS:
+ case CDROM_LOCKDOOR:
+ case CDROM_DEBUG:
break;
default:
/* unknown ioctl number */
@@ -699,8 +722,14 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
struct backing_dev_info *bdi;
loff_t size;
+ /*
+ * O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
+ * to updated it before every ioctl.
+ */
if (file->f_flags & O_NDELAY)
- mode |= FMODE_NDELAY_NOW;
+ mode |= FMODE_NDELAY;
+ else
+ mode &= ~FMODE_NDELAY;
switch (cmd) {
case HDIO_GETGEO:
diff --git a/block/elevator.c b/block/elevator.c
index 9ac82dde99d..a6951f76ba0 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -844,14 +844,7 @@ void elv_dequeue_request(struct request_queue *q, struct request *rq)
*/
if (blk_account_rq(rq))
q->in_flight++;
-
- /*
- * We are now handing the request to the hardware, add the
- * timeout handler.
- */
- blk_add_timer(rq);
}
-EXPORT_SYMBOL(elv_dequeue_request);
int elv_queue_empty(struct request_queue *q)
{
diff --git a/block/genhd.c b/block/genhd.c
index 27549e470da..2f7feda61e3 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -1102,6 +1102,7 @@ struct gendisk *alloc_disk_node(int minors, int node_id)
kfree(disk);
return NULL;
}
+ disk->node_id = node_id;
if (disk_expand_part_tbl(disk, 0)) {
free_part_stats(&disk->part0);
kfree(disk);
@@ -1116,7 +1117,6 @@ struct gendisk *alloc_disk_node(int minors, int node_id)
device_initialize(disk_to_dev(disk));
INIT_WORK(&disk->async_notify,
media_change_notify_thread);
- disk->node_id = node_id;
}
return disk;
}
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 5963cf91a3a..d0bb92cbefb 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -208,6 +208,8 @@ static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq,
rq->timeout = q->sg_timeout;
if (!rq->timeout)
rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
+ if (rq->timeout < BLK_MIN_SG_TIMEOUT)
+ rq->timeout = BLK_MIN_SG_TIMEOUT;
return 0;
}
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 39dbd8e4dde..dc20a34ba5e 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -31,35 +31,63 @@ config CRYPTO_FIPS
config CRYPTO_ALGAPI
tristate
+ select CRYPTO_ALGAPI2
help
This option provides the API for cryptographic algorithms.
+config CRYPTO_ALGAPI2
+ tristate
+
config CRYPTO_AEAD
tristate
+ select CRYPTO_AEAD2
select CRYPTO_ALGAPI
+config CRYPTO_AEAD2
+ tristate
+ select CRYPTO_ALGAPI2
+
config CRYPTO_BLKCIPHER
tristate
+ select CRYPTO_BLKCIPHER2
select CRYPTO_ALGAPI
- select CRYPTO_RNG
+
+config CRYPTO_BLKCIPHER2
+ tristate
+ select CRYPTO_ALGAPI2
+ select CRYPTO_RNG2
config CRYPTO_HASH
tristate
+ select CRYPTO_HASH2
select CRYPTO_ALGAPI
+config CRYPTO_HASH2
+ tristate
+ select CRYPTO_ALGAPI2
+
config CRYPTO_RNG
tristate
+ select CRYPTO_RNG2
select CRYPTO_ALGAPI
+config CRYPTO_RNG2
+ tristate
+ select CRYPTO_ALGAPI2
+
config CRYPTO_MANAGER
tristate "Cryptographic algorithm manager"
- select CRYPTO_AEAD
- select CRYPTO_HASH
- select CRYPTO_BLKCIPHER
+ select CRYPTO_MANAGER2
help
Create default cryptographic template instantiations such as
cbc(aes).
+config CRYPTO_MANAGER2
+ def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
+ select CRYPTO_AEAD2
+ select CRYPTO_HASH2
+ select CRYPTO_BLKCIPHER2
+
config CRYPTO_GF128MUL
tristate "GF(2^128) multiplication functions (EXPERIMENTAL)"
depends on EXPERIMENTAL
diff --git a/crypto/Makefile b/crypto/Makefile
index 5862b807334..cd4a4ed078f 100644
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -9,24 +9,24 @@ obj-$(CONFIG_CRYPTO_FIPS) += fips.o
crypto_algapi-$(CONFIG_PROC_FS) += proc.o
crypto_algapi-objs := algapi.o scatterwalk.o $(crypto_algapi-y)
-obj-$(CONFIG_CRYPTO_ALGAPI) += crypto_algapi.o
+obj-$(CONFIG_CRYPTO_ALGAPI2) += crypto_algapi.o
-obj-$(CONFIG_CRYPTO_AEAD) += aead.o
+obj-$(CONFIG_CRYPTO_AEAD2) += aead.o
crypto_blkcipher-objs := ablkcipher.o
crypto_blkcipher-objs += blkcipher.o
-obj-$(CONFIG_CRYPTO_BLKCIPHER) += crypto_blkcipher.o
-obj-$(CONFIG_CRYPTO_BLKCIPHER) += chainiv.o
-obj-$(CONFIG_CRYPTO_BLKCIPHER) += eseqiv.o
+obj-$(CONFIG_CRYPTO_BLKCIPHER2) += crypto_blkcipher.o
+obj-$(CONFIG_CRYPTO_BLKCIPHER2) += chainiv.o
+obj-$(CONFIG_CRYPTO_BLKCIPHER2) += eseqiv.o
obj-$(CONFIG_CRYPTO_SEQIV) += seqiv.o
crypto_hash-objs := hash.o
crypto_hash-objs += ahash.o
-obj-$(CONFIG_CRYPTO_HASH) += crypto_hash.o
+obj-$(CONFIG_CRYPTO_HASH2) += crypto_hash.o
cryptomgr-objs := algboss.o testmgr.o
-obj-$(CONFIG_CRYPTO_MANAGER) += cryptomgr.o
+obj-$(CONFIG_CRYPTO_MANAGER2) += cryptomgr.o
obj-$(CONFIG_CRYPTO_HMAC) += hmac.o
obj-$(CONFIG_CRYPTO_XCBC) += xcbc.o
obj-$(CONFIG_CRYPTO_NULL) += crypto_null.o
@@ -73,8 +73,8 @@ obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += michael_mic.o
obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o
obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o
obj-$(CONFIG_CRYPTO_LZO) += lzo.o
-obj-$(CONFIG_CRYPTO_RNG) += rng.o
-obj-$(CONFIG_CRYPTO_RNG) += krng.o
+obj-$(CONFIG_CRYPTO_RNG2) += rng.o
+obj-$(CONFIG_CRYPTO_RNG2) += krng.o
obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_cprng.o
obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index a0a178dd189..1423b0c0cd2 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -174,15 +174,6 @@ static int acpi_battery_get_property(struct power_supply *psy,
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
val->intval = battery->current_now * 1000;
- /* if power units are mW, convert to mA by
- dividing by current voltage (mV/1000) */
- if (!battery->power_unit) {
- if (battery->voltage_now) {
- val->intval /= battery->voltage_now;
- val->intval *= 1000;
- } else
- val->intval = -1;
- }
break;
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index 25f531d892d..40e60fc2e59 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -824,32 +824,36 @@ static int __init toshiba_acpi_init(void)
toshiba_acpi_exit();
return -ENOMEM;
}
- }
- /* Register input device for kill switch */
- toshiba_acpi.poll_dev = input_allocate_polled_device();
- if (!toshiba_acpi.poll_dev) {
- printk(MY_ERR "unable to allocate kill-switch input device\n");
- toshiba_acpi_exit();
- return -ENOMEM;
- }
- toshiba_acpi.poll_dev->private = &toshiba_acpi;
- toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
- toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
-
- toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
- toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
- toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */
- set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
- set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
- input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
- input_sync(toshiba_acpi.poll_dev->input);
-
- ret = input_register_polled_device(toshiba_acpi.poll_dev);
- if (ret) {
- printk(MY_ERR "unable to register kill-switch input device\n");
- toshiba_acpi_exit();
- return ret;
+ /* Register input device for kill switch */
+ toshiba_acpi.poll_dev = input_allocate_polled_device();
+ if (!toshiba_acpi.poll_dev) {
+ printk(MY_ERR
+ "unable to allocate kill-switch input device\n");
+ toshiba_acpi_exit();
+ return -ENOMEM;
+ }
+ toshiba_acpi.poll_dev->private = &toshiba_acpi;
+ toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
+ toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
+
+ toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
+ toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
+ /* Toshiba USB ID */
+ toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
+ set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
+ set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
+ input_report_switch(toshiba_acpi.poll_dev->input,
+ SW_RFKILL_ALL, TRUE);
+ input_sync(toshiba_acpi.poll_dev->input);
+
+ ret = input_register_polled_device(toshiba_acpi.poll_dev);
+ if (ret) {
+ printk(MY_ERR
+ "unable to register kill-switch input device\n");
+ toshiba_acpi_exit();
+ return ret;
+ }
}
return 0;
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 78fbec8ceda..421b7c71e72 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -153,7 +153,7 @@ config SATA_PROMISE
If unsure, say N.
config SATA_SX4
- tristate "Promise SATA SX4 support"
+ tristate "Promise SATA SX4 support (Experimental)"
depends on PCI && EXPERIMENTAL
help
This option enables support for Promise Serial ATA SX4.
@@ -219,8 +219,8 @@ config PATA_ACPI
otherwise unsupported hardware.
config PATA_ALI
- tristate "ALi PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "ALi PATA support"
+ depends on PCI
help
This option enables support for the ALi ATA interfaces
found on the many ALi chipsets.
@@ -263,7 +263,7 @@ config PATA_ATIIXP
If unsure, say N.
config PATA_CMD640_PCI
- tristate "CMD640 PCI PATA support (Very Experimental)"
+ tristate "CMD640 PCI PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
help
This option enables support for the CMD640 PCI IDE
@@ -291,8 +291,8 @@ config PATA_CS5520
If unsure, say N.
config PATA_CS5530
- tristate "CS5530 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "CS5530 PATA support"
+ depends on PCI
help
This option enables support for the Cyrix/NatSemi/AMD CS5530
companion chip used with the MediaGX/Geode processor family.
@@ -309,8 +309,8 @@ config PATA_CS5535
If unsure, say N.
config PATA_CS5536
- tristate "CS5536 PATA support (Experimental)"
- depends on PCI && X86 && !X86_64 && EXPERIMENTAL
+ tristate "CS5536 PATA support"
+ depends on PCI && X86 && !X86_64
help
This option enables support for the AMD CS5536
companion chip used with the Geode LX processor family.
@@ -363,7 +363,7 @@ config PATA_HPT37X
If unsure, say N.
config PATA_HPT3X2N
- tristate "HPT 372N/302N PATA support (Very Experimental)"
+ tristate "HPT 372N/302N PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
help
This option enables support for the N variant HPT PATA
@@ -389,8 +389,8 @@ config PATA_HPT3X3_DMA
problems with DMA on this chipset.
config PATA_ISAPNP
- tristate "ISA Plug and Play PATA support (Experimental)"
- depends on EXPERIMENTAL && ISAPNP
+ tristate "ISA Plug and Play PATA support"
+ depends on ISAPNP
help
This option enables support for ISA plug & play ATA
controllers such as those found on old soundcards.
@@ -498,8 +498,8 @@ config PATA_NINJA32
If unsure, say N.
config PATA_NS87410
- tristate "Nat Semi NS87410 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "Nat Semi NS87410 PATA support"
+ depends on PCI
help
This option enables support for the National Semiconductor
NS87410 PCI-IDE controller.
@@ -507,8 +507,8 @@ config PATA_NS87410
If unsure, say N.
config PATA_NS87415
- tristate "Nat Semi NS87415 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "Nat Semi NS87415 PATA support"
+ depends on PCI
help
This option enables support for the National Semiconductor
NS87415 PCI-IDE controller.
@@ -544,8 +544,8 @@ config PATA_PCMCIA
If unsure, say N.
config PATA_PDC_OLD
- tristate "Older Promise PATA controller support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "Older Promise PATA controller support"
+ depends on PCI
help
This option enables support for the Promise 20246, 20262, 20263,
20265 and 20267 adapters.
@@ -559,7 +559,7 @@ config PATA_QDI
Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
config PATA_RADISYS
- tristate "RADISYS 82600 PATA support (Very Experimental)"
+ tristate "RADISYS 82600 PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
help
This option enables support for the RADISYS 82600
@@ -586,8 +586,8 @@ config PATA_RZ1000
If unsure, say N.
config PATA_SC1200
- tristate "SC1200 PATA support (Very Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "SC1200 PATA support"
+ depends on PCI
help
This option enables support for the NatSemi/AMD SC1200 SoC
companion chip used with the Geode processor family.
@@ -620,8 +620,8 @@ config PATA_SIL680
If unsure, say N.
config PATA_SIS
- tristate "SiS PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "SiS PATA support"
+ depends on PCI
help
This option enables support for SiS PATA controllers
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index d6d97d8f3fa..c11936e13dd 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1072,7 +1072,14 @@ static int piix_broken_suspend(void)
* matching is necessary because dmi_system_id.matches is
* limited to four entries.
*/
- if (!strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") &&
+ if (dmi_get_system_info(DMI_SYS_VENDOR) &&
+ dmi_get_system_info(DMI_PRODUCT_NAME) &&
+ dmi_get_system_info(DMI_PRODUCT_VERSION) &&
+ dmi_get_system_info(DMI_PRODUCT_SERIAL) &&
+ dmi_get_system_info(DMI_BOARD_VENDOR) &&
+ dmi_get_system_info(DMI_BOARD_NAME) &&
+ dmi_get_system_info(DMI_BOARD_VERSION) &&
+ !strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") &&
!strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") &&
!strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") &&
!strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") &&
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index f2b83eabc7c..a098ba8eaab 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -382,10 +382,10 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
/* PCI clocking determines the ATA timing values to use */
/* info_hpt366 is safe against re-entry so we can scribble on it */
switch((reg1 & 0x700) >> 8) {
- case 5:
+ case 9:
hpriv = &hpt366_40;
break;
- case 9:
+ case 5:
hpriv = &hpt366_25;
break;
default:
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 4e466eae8b4..4dd9a3b031e 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -44,7 +44,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_ninja32"
-#define DRV_VERSION "0.1.1"
+#define DRV_VERSION "0.1.3"
/**
@@ -130,7 +130,8 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
return rc;
pci_set_master(dev);
- /* Set up the register mappings */
+ /* Set up the register mappings. We use the I/O mapping as only the
+ older chips also have MMIO on BAR 1 */
base = host->iomap[0];
if (!base)
return -ENOMEM;
@@ -167,8 +168,12 @@ static int ninja32_reinit_one(struct pci_dev *pdev)
#endif
static const struct pci_device_id ninja32[] = {
+ { 0x10FC, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0x1145, 0x8008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0x1145, 0xf008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0x1145, 0xf02C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ },
};
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index d3423661175..e4be55e047f 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -56,7 +56,6 @@ static const struct sis_laptop sis_laptop[] = {
{ 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
{ 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */
{ 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
- { 0x5513, 0x1039, 0x5513 }, /* Targa Visionary 1000 */
/* end marker */
{ 0, }
};
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index f20bf359b84..dc7a8c352da 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -302,7 +302,7 @@ static struct kobj_type kobj_pkt_type_wqueue = {
static void pkt_sysfs_dev_new(struct pktcdvd_device *pd)
{
if (class_pktcdvd) {
- pd->dev = device_create(class_pktcdvd, NULL, pd->pkt_dev, NULL,
+ pd->dev = device_create(class_pktcdvd, NULL, MKDEV(0, 0), NULL,
"%s", pd->name);
if (IS_ERR(pd->dev))
pd->dev = NULL;
@@ -2790,7 +2790,7 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev)
return 0;
out_mem:
- blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
+ blkdev_put(bdev, FMODE_READ | FMODE_NDELAY);
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
return ret;
@@ -2975,7 +2975,7 @@ static int pkt_remove_dev(dev_t pkt_dev)
pkt_debugfs_dev_remove(pd);
pkt_sysfs_dev_remove(pd);
- blkdev_put(pd->bdev, FMODE_READ|FMODE_WRITE);
+ blkdev_put(pd->bdev, FMODE_READ | FMODE_NDELAY);
remove_proc_entry(pd->name, pkt_proc);
DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name);
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index d16b02423d6..7d2e91cccb1 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -2081,10 +2081,6 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
if (!q)
return -ENXIO;
- rq = blk_get_request(q, READ, GFP_KERNEL);
- if (!rq)
- return -ENOMEM;
-
cdi->last_sense = 0;
while (nframes) {
@@ -2096,9 +2092,17 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
len = nr * CD_FRAMESIZE_RAW;
+ rq = blk_get_request(q, READ, GFP_KERNEL);
+ if (!rq) {
+ ret = -ENOMEM;
+ break;
+ }
+
ret = blk_rq_map_user(q, rq, NULL, ubuf, len, GFP_KERNEL);
- if (ret)
+ if (ret) {
+ blk_put_request(rq);
break;
+ }
rq->cmd[0] = GPCMD_READ_CD;
rq->cmd[1] = 1 << 2;
@@ -2124,6 +2128,7 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
if (blk_rq_unmap_user(bio))
ret = -EFAULT;
+ blk_put_request(rq);
if (ret)
break;
@@ -2133,7 +2138,6 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
ubuf += len;
}
- blk_put_request(rq);
return ret;
}
diff --git a/drivers/char/cp437.uni b/drivers/char/cp437.uni
index 1f06889a96b..bc6163484f6 100644
--- a/drivers/char/cp437.uni
+++ b/drivers/char/cp437.uni
@@ -27,7 +27,7 @@
0x0c U+2640
0x0d U+266a
0x0e U+266b
-0x0f U+263c
+0x0f U+263c U+00a4
0x10 U+25b6 U+25ba
0x11 U+25c0 U+25c4
0x12 U+2195
@@ -55,7 +55,7 @@
0x24 U+0024
0x25 U+0025
0x26 U+0026
-0x27 U+0027
+0x27 U+0027 U+00b4
0x28 U+0028
0x29 U+0029
0x2a U+002a
@@ -84,7 +84,7 @@
0x41 U+0041 U+00c0 U+00c1 U+00c2 U+00c3
0x42 U+0042
0x43 U+0043 U+00a9
-0x44 U+0044
+0x44 U+0044 U+00d0
0x45 U+0045 U+00c8 U+00ca U+00cb
0x46 U+0046
0x47 U+0047
@@ -140,7 +140,7 @@
0x79 U+0079 U+00fd
0x7a U+007a
0x7b U+007b
-0x7c U+007c U+00a5
+0x7c U+007c U+00a6
0x7d U+007d
0x7e U+007e
#
@@ -263,10 +263,10 @@
0xe8 U+03a6 U+00d8
0xe9 U+0398
0xea U+03a9 U+2126
-0xeb U+03b4
+0xeb U+03b4 U+00f0
0xec U+221e
0xed U+03c6 U+00f8
-0xee U+03b5
+0xee U+03b5 U+2208
0xef U+2229
0xf0 U+2261
0xf1 U+00b1
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index 3b23270eaa6..a8f15e6be59 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -418,7 +418,7 @@ static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id)
TTY_OVERRUN);
/*
If the flip buffer itself is
- overflowing, we still loose
+ overflowing, we still lose
the next incoming character.
*/
if (tty_buffer_request_room(tty, 1) !=
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index a5af6072e2b..008176edbd6 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2274,7 +2274,7 @@ rescan_last_byte:
continue; /* nothing to display */
}
/* Glyph not found */
- if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) {
+ if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) {
/* In legacy mode use the glyph we get by a 1:1 mapping.
This would make absolutely no sense with Unicode in mind,
but do this for ASCII characters since a font may lack
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 46610b09041..ab9c01e462e 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -974,6 +974,7 @@ at_context_queue_packet(struct context *ctx, struct fw_packet *packet)
packet->ack = RCODE_SEND_ERROR;
return -1;
}
+ packet->payload_bus = payload_bus;
d[2].req_count = cpu_to_le16(packet->payload_length);
d[2].data_address = cpu_to_le32(payload_bus);
@@ -1025,7 +1026,6 @@ static int handle_at_packet(struct context *context,
struct driver_data *driver_data;
struct fw_packet *packet;
struct fw_ohci *ohci = context->ohci;
- dma_addr_t payload_bus;
int evt;
if (last->transfer_status == 0)
@@ -1038,9 +1038,8 @@ static int handle_at_packet(struct context *context,
/* This packet was cancelled, just continue. */
return 1;
- payload_bus = le32_to_cpu(last->data_address);
- if (payload_bus != 0)
- dma_unmap_single(ohci->card.device, payload_bus,
+ if (packet->payload_bus)
+ dma_unmap_single(ohci->card.device, packet->payload_bus,
packet->payload_length, DMA_TO_DEVICE);
evt = le16_to_cpu(last->transfer_status) & 0x1f;
@@ -1697,6 +1696,10 @@ static int ohci_cancel_packet(struct fw_card *card, struct fw_packet *packet)
if (packet->ack != 0)
goto out;
+ if (packet->payload_bus)
+ dma_unmap_single(ohci->card.device, packet->payload_bus,
+ packet->payload_length, DMA_TO_DEVICE);
+
log_ar_at_event('T', packet->speed, packet->header, 0x20);
driver_data->packet = NULL;
packet->ack = RCODE_CANCELLED;
diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c
index 022ac4fabb6..2884f876397 100644
--- a/drivers/firewire/fw-transaction.c
+++ b/drivers/firewire/fw-transaction.c
@@ -207,6 +207,7 @@ fw_fill_request(struct fw_packet *packet, int tcode, int tlabel,
packet->speed = speed;
packet->generation = generation;
packet->ack = 0;
+ packet->payload_bus = 0;
}
/**
@@ -581,6 +582,8 @@ fw_fill_response(struct fw_packet *response, u32 *request_header,
BUG();
return;
}
+
+ response->payload_bus = 0;
}
EXPORT_SYMBOL(fw_fill_response);
diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h
index aed7dbb17cd..839466f0a79 100644
--- a/drivers/firewire/fw-transaction.h
+++ b/drivers/firewire/fw-transaction.h
@@ -27,6 +27,7 @@
#include <linux/list.h>
#include <linux/spinlock_types.h>
#include <linux/timer.h>
+#include <linux/types.h>
#include <linux/workqueue.h>
#define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4)
@@ -153,6 +154,7 @@ struct fw_packet {
size_t header_length;
void *payload;
size_t payload_length;
+ dma_addr_t payload_bus;
u32 timestamp;
/*
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index ba89b42f790..553dd4bc307 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -847,9 +847,10 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
* and the registers being closely associated.
*
* According to chipset errata, on the 965GM, MSI interrupts may
- * be lost or delayed
+ * be lost or delayed, but we use them anyways to avoid
+ * stuck interrupts on some machines.
*/
- if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev))
+ if (!IS_I945G(dev) && !IS_I945GM(dev))
pci_enable_msi(dev->pdev);
intel_opregion_init(dev);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 0a4f39b9a0e..adc972cc6bf 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -244,6 +244,10 @@ typedef struct drm_i915_private {
* List of objects currently involved in rendering from the
* ringbuffer.
*
+ * Includes buffers having the contents of their GPU caches
+ * flushed, not necessarily primitives. last_rendering_seqno
+ * represents when the rendering involved will be completed.
+ *
* A reference is held on the buffer while on this list.
*/
struct list_head active_list;
@@ -253,6 +257,8 @@ typedef struct drm_i915_private {
* still have a write_domain which needs to be flushed before
* unbinding.
*
+ * last_rendering_seqno is 0 while an object is in this list.
+ *
* A reference is held on the buffer while on this list.
*/
struct list_head flushing_list;
@@ -261,6 +267,8 @@ typedef struct drm_i915_private {
* LRU list of objects which are not in the ringbuffer and
* are ready to unbind, but are still in the GTT.
*
+ * last_rendering_seqno is 0 while an object is in this list.
+ *
* A reference is not held on the buffer while on this list,
* as merely being GTT-bound shouldn't prevent its being
* freed, and we'll pull it off the list in the free path.
@@ -371,8 +379,8 @@ struct drm_i915_gem_object {
uint32_t agp_type;
/**
- * Flagging of which individual pages are valid in GEM_DOMAIN_CPU when
- * GEM_DOMAIN_CPU is not in the object's read domain.
+ * If present, while GEM_DOMAIN_CPU is in the read domain this array
+ * flags which individual pages are valid.
*/
uint8_t *page_cpu_valid;
};
@@ -394,9 +402,6 @@ struct drm_i915_gem_request {
/** Time at which this request was emitted, in jiffies. */
unsigned long emitted_jiffies;
- /** Cache domains that were flushed at the start of the request. */
- uint32_t flush_domains;
-
struct list_head list;
};
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index d58ddef468f..ad672d85482 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -33,21 +33,21 @@
#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
-static int
-i915_gem_object_set_domain(struct drm_gem_object *obj,
- uint32_t read_domains,
- uint32_t write_domain);
-static int
-i915_gem_object_set_domain_range(struct drm_gem_object *obj,
- uint64_t offset,
- uint64_t size,
- uint32_t read_domains,
- uint32_t write_domain);
-static int
-i915_gem_set_domain(struct drm_gem_object *obj,
- struct drm_file *file_priv,
- uint32_t read_domains,
- uint32_t write_domain);
+static void
+i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
+ uint32_t read_domains,
+ uint32_t write_domain);
+static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
+static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
+static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
+static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
+ int write);
+static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj,
+ int write);
+static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
+ uint64_t offset,
+ uint64_t size);
+static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj);
static int i915_gem_object_get_page_list(struct drm_gem_object *obj);
static void i915_gem_object_free_page_list(struct drm_gem_object *obj);
static int i915_gem_object_wait_rendering(struct drm_gem_object *obj);
@@ -162,8 +162,8 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_set_domain_range(obj, args->offset, args->size,
- I915_GEM_DOMAIN_CPU, 0);
+ ret = i915_gem_object_set_cpu_read_domain_range(obj, args->offset,
+ args->size);
if (ret != 0) {
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
@@ -260,8 +260,7 @@ i915_gem_gtt_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
mutex_unlock(&dev->struct_mutex);
return ret;
}
- ret = i915_gem_set_domain(obj, file_priv,
- I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT);
+ ret = i915_gem_object_set_to_gtt_domain(obj, 1);
if (ret)
goto fail;
@@ -320,8 +319,7 @@ i915_gem_shmem_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_set_domain(obj, file_priv,
- I915_GEM_DOMAIN_CPU, I915_GEM_DOMAIN_CPU);
+ ret = i915_gem_object_set_to_cpu_domain(obj, 1);
if (ret) {
mutex_unlock(&dev->struct_mutex);
return ret;
@@ -397,7 +395,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
}
/**
- * Called when user space prepares to use an object
+ * Called when user space prepares to use an object with the CPU, either
+ * through the mmap ioctl's mapping or a GTT mapping.
*/
int
i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
@@ -405,11 +404,26 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
{
struct drm_i915_gem_set_domain *args = data;
struct drm_gem_object *obj;
+ uint32_t read_domains = args->read_domains;
+ uint32_t write_domain = args->write_domain;
int ret;
if (!(dev->driver->driver_features & DRIVER_GEM))
return -ENODEV;
+ /* Only handle setting domains to types used by the CPU. */
+ if (write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+ return -EINVAL;
+
+ if (read_domains & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+ return -EINVAL;
+
+ /* Having something in the write domain implies it's in the read
+ * domain, and only that read domain. Enforce that in the request.
+ */
+ if (write_domain != 0 && read_domains != write_domain)
+ return -EINVAL;
+
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
return -EBADF;
@@ -417,10 +431,21 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
mutex_lock(&dev->struct_mutex);
#if WATCH_BUF
DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n",
- obj, obj->size, args->read_domains, args->write_domain);
+ obj, obj->size, read_domains, write_domain);
#endif
- ret = i915_gem_set_domain(obj, file_priv,
- args->read_domains, args->write_domain);
+ if (read_domains & I915_GEM_DOMAIN_GTT) {
+ ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0);
+
+ /* Silently promote "you're not bound, there was nothing to do"
+ * to success, since the client was just asking us to
+ * make sure everything was done.
+ */
+ if (ret == -EINVAL)
+ ret = 0;
+ } else {
+ ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0);
+ }
+
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
return ret;
@@ -455,10 +480,9 @@ i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data,
obj_priv = obj->driver_private;
/* Pinned buffers may be scanout, so flush the cache */
- if ((obj->write_domain & I915_GEM_DOMAIN_CPU) && obj_priv->pin_count) {
- i915_gem_clflush_object(obj);
- drm_agp_chipset_flush(dev);
- }
+ if (obj_priv->pin_count)
+ i915_gem_object_flush_cpu_write_domain(obj);
+
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
return ret;
@@ -532,7 +556,7 @@ i915_gem_object_free_page_list(struct drm_gem_object *obj)
}
static void
-i915_gem_object_move_to_active(struct drm_gem_object *obj)
+i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno)
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
@@ -546,8 +570,20 @@ i915_gem_object_move_to_active(struct drm_gem_object *obj)
/* Move from whatever list we were on to the tail of execution. */
list_move_tail(&obj_priv->list,
&dev_priv->mm.active_list);
+ obj_priv->last_rendering_seqno = seqno;
}
+static void
+i915_gem_object_move_to_flushing(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+ BUG_ON(!obj_priv->active);
+ list_move_tail(&obj_priv->list, &dev_priv->mm.flushing_list);
+ obj_priv->last_rendering_seqno = 0;
+}
static void
i915_gem_object_move_to_inactive(struct drm_gem_object *obj)
@@ -562,6 +598,7 @@ i915_gem_object_move_to_inactive(struct drm_gem_object *obj)
else
list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
+ obj_priv->last_rendering_seqno = 0;
if (obj_priv->active) {
obj_priv->active = 0;
drm_gem_object_unreference(obj);
@@ -610,10 +647,28 @@ i915_add_request(struct drm_device *dev, uint32_t flush_domains)
request->seqno = seqno;
request->emitted_jiffies = jiffies;
- request->flush_domains = flush_domains;
was_empty = list_empty(&dev_priv->mm.request_list);
list_add_tail(&request->list, &dev_priv->mm.request_list);
+ /* Associate any objects on the flushing list matching the write
+ * domain we're flushing with our flush.
+ */
+ if (flush_domains != 0) {
+ struct drm_i915_gem_object *obj_priv, *next;
+
+ list_for_each_entry_safe(obj_priv, next,
+ &dev_priv->mm.flushing_list, list) {
+ struct drm_gem_object *obj = obj_priv->obj;
+
+ if ((obj->write_domain & flush_domains) ==
+ obj->write_domain) {
+ obj->write_domain = 0;
+ i915_gem_object_move_to_active(obj, seqno);
+ }
+ }
+
+ }
+
if (was_empty && !dev_priv->mm.suspended)
schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
return seqno;
@@ -676,30 +731,10 @@ i915_gem_retire_request(struct drm_device *dev,
__func__, request->seqno, obj);
#endif
- if (obj->write_domain != 0) {
- list_move_tail(&obj_priv->list,
- &dev_priv->mm.flushing_list);
- } else {
+ if (obj->write_domain != 0)
+ i915_gem_object_move_to_flushing(obj);
+ else
i915_gem_object_move_to_inactive(obj);
- }
- }
-
- if (request->flush_domains != 0) {
- struct drm_i915_gem_object *obj_priv, *next;
-
- /* Clear the write domain and activity from any buffers
- * that are just waiting for a flush matching the one retired.
- */
- list_for_each_entry_safe(obj_priv, next,
- &dev_priv->mm.flushing_list, list) {
- struct drm_gem_object *obj = obj_priv->obj;
-
- if (obj->write_domain & request->flush_domains) {
- obj->write_domain = 0;
- i915_gem_object_move_to_inactive(obj);
- }
- }
-
}
}
@@ -892,25 +927,10 @@ i915_gem_object_wait_rendering(struct drm_gem_object *obj)
struct drm_i915_gem_object *obj_priv = obj->driver_private;
int ret;
- /* If there are writes queued to the buffer, flush and
- * create a new seqno to wait for.
+ /* This function only exists to support waiting for existing rendering,
+ * not for emitting required flushes.
*/
- if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) {
- uint32_t write_domain = obj->write_domain;
-#if WATCH_BUF
- DRM_INFO("%s: flushing object %p from write domain %08x\n",
- __func__, obj, write_domain);
-#endif
- i915_gem_flush(dev, 0, write_domain);
-
- i915_gem_object_move_to_active(obj);
- obj_priv->last_rendering_seqno = i915_add_request(dev,
- write_domain);
- BUG_ON(obj_priv->last_rendering_seqno == 0);
-#if WATCH_LRU
- DRM_INFO("%s: flush moves to exec list %p\n", __func__, obj);
-#endif
- }
+ BUG_ON((obj->write_domain & I915_GEM_GPU_DOMAINS) != 0);
/* If there is rendering queued on the buffer being evicted, wait for
* it.
@@ -950,24 +970,16 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
return -EINVAL;
}
- /* Wait for any rendering to complete
- */
- ret = i915_gem_object_wait_rendering(obj);
- if (ret) {
- DRM_ERROR("wait_rendering failed: %d\n", ret);
- return ret;
- }
-
/* Move the object to the CPU domain to ensure that
* any possible CPU writes while it's not in the GTT
* are flushed when we go to remap it. This will
* also ensure that all pending GPU writes are finished
* before we unbind.
*/
- ret = i915_gem_object_set_domain(obj, I915_GEM_DOMAIN_CPU,
- I915_GEM_DOMAIN_CPU);
+ ret = i915_gem_object_set_to_cpu_domain(obj, 1);
if (ret) {
- DRM_ERROR("set_domain failed: %d\n", ret);
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("set_domain failed: %d\n", ret);
return ret;
}
@@ -1083,6 +1095,21 @@ i915_gem_evict_something(struct drm_device *dev)
}
static int
+i915_gem_evict_everything(struct drm_device *dev)
+{
+ int ret;
+
+ for (;;) {
+ ret = i915_gem_evict_something(dev);
+ if (ret != 0)
+ break;
+ }
+ if (ret == -ENOMEM)
+ return 0;
+ return ret;
+}
+
+static int
i915_gem_object_get_page_list(struct drm_gem_object *obj)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
@@ -1168,7 +1195,8 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment)
ret = i915_gem_evict_something(dev);
if (ret != 0) {
- DRM_ERROR("Failed to evict a buffer %d\n", ret);
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("Failed to evict a buffer %d\n", ret);
return ret;
}
goto search_free;
@@ -1228,6 +1256,143 @@ i915_gem_clflush_object(struct drm_gem_object *obj)
drm_clflush_pages(obj_priv->page_list, obj->size / PAGE_SIZE);
}
+/** Flushes any GPU write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ uint32_t seqno;
+
+ if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0)
+ return;
+
+ /* Queue the GPU write cache flushing we need. */
+ i915_gem_flush(dev, 0, obj->write_domain);
+ seqno = i915_add_request(dev, obj->write_domain);
+ obj->write_domain = 0;
+ i915_gem_object_move_to_active(obj, seqno);
+}
+
+/** Flushes the GTT write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj)
+{
+ if (obj->write_domain != I915_GEM_DOMAIN_GTT)
+ return;
+
+ /* No actual flushing is required for the GTT write domain. Writes
+ * to it immediately go to main memory as far as we know, so there's
+ * no chipset flush. It also doesn't land in render cache.
+ */
+ obj->write_domain = 0;
+}
+
+/** Flushes the CPU write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+
+ if (obj->write_domain != I915_GEM_DOMAIN_CPU)
+ return;
+
+ i915_gem_clflush_object(obj);
+ drm_agp_chipset_flush(dev);
+ obj->write_domain = 0;
+}
+
+/**
+ * Moves a single object to the GTT read, and possibly write domain.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write)
+{
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ int ret;
+
+ /* Not valid to be called on unbound objects. */
+ if (obj_priv->gtt_space == NULL)
+ return -EINVAL;
+
+ i915_gem_object_flush_gpu_write_domain(obj);
+ /* Wait on any GPU rendering and flushing to occur. */
+ ret = i915_gem_object_wait_rendering(obj);
+ if (ret != 0)
+ return ret;
+
+ /* If we're writing through the GTT domain, then CPU and GPU caches
+ * will need to be invalidated at next use.
+ */
+ if (write)
+ obj->read_domains &= I915_GEM_DOMAIN_GTT;
+
+ i915_gem_object_flush_cpu_write_domain(obj);
+
+ /* It should now be out of any other write domains, and we can update
+ * the domain values for our changes.
+ */
+ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
+ obj->read_domains |= I915_GEM_DOMAIN_GTT;
+ if (write) {
+ obj->write_domain = I915_GEM_DOMAIN_GTT;
+ obj_priv->dirty = 1;
+ }
+
+ return 0;
+}
+
+/**
+ * Moves a single object to the CPU read, and possibly write domain.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write)
+{
+ struct drm_device *dev = obj->dev;
+ int ret;
+
+ i915_gem_object_flush_gpu_write_domain(obj);
+ /* Wait on any GPU rendering and flushing to occur. */
+ ret = i915_gem_object_wait_rendering(obj);
+ if (ret != 0)
+ return ret;
+
+ i915_gem_object_flush_gtt_write_domain(obj);
+
+ /* If we have a partially-valid cache of the object in the CPU,
+ * finish invalidating it and free the per-page flags.
+ */
+ i915_gem_object_set_to_full_cpu_read_domain(obj);
+
+ /* Flush the CPU cache if it's still invalid. */
+ if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) {
+ i915_gem_clflush_object(obj);
+ drm_agp_chipset_flush(dev);
+
+ obj->read_domains |= I915_GEM_DOMAIN_CPU;
+ }
+
+ /* It should now be out of any other write domains, and we can update
+ * the domain values for our changes.
+ */
+ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
+
+ /* If we're writing through the CPU, then the GPU read domains will
+ * need to be invalidated at next use.
+ */
+ if (write) {
+ obj->read_domains &= I915_GEM_DOMAIN_CPU;
+ obj->write_domain = I915_GEM_DOMAIN_CPU;
+ }
+
+ return 0;
+}
+
/*
* Set the next domain for the specified object. This
* may not actually perform the necessary flushing/invaliding though,
@@ -1339,16 +1504,18 @@ i915_gem_clflush_object(struct drm_gem_object *obj)
* MI_FLUSH
* drm_agp_chipset_flush
*/
-static int
-i915_gem_object_set_domain(struct drm_gem_object *obj,
- uint32_t read_domains,
- uint32_t write_domain)
+static void
+i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
+ uint32_t read_domains,
+ uint32_t write_domain)
{
struct drm_device *dev = obj->dev;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
uint32_t invalidate_domains = 0;
uint32_t flush_domains = 0;
- int ret;
+
+ BUG_ON(read_domains & I915_GEM_DOMAIN_CPU);
+ BUG_ON(write_domain == I915_GEM_DOMAIN_CPU);
#if WATCH_BUF
DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n",
@@ -1385,34 +1552,11 @@ i915_gem_object_set_domain(struct drm_gem_object *obj,
DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n",
__func__, flush_domains, invalidate_domains);
#endif
- /*
- * If we're invaliding the CPU cache and flushing a GPU cache,
- * then pause for rendering so that the GPU caches will be
- * flushed before the cpu cache is invalidated
- */
- if ((invalidate_domains & I915_GEM_DOMAIN_CPU) &&
- (flush_domains & ~(I915_GEM_DOMAIN_CPU |
- I915_GEM_DOMAIN_GTT))) {
- ret = i915_gem_object_wait_rendering(obj);
- if (ret)
- return ret;
- }
i915_gem_clflush_object(obj);
}
if ((write_domain | flush_domains) != 0)
obj->write_domain = write_domain;
-
- /* If we're invalidating the CPU domain, clear the per-page CPU
- * domain list as well.
- */
- if (obj_priv->page_cpu_valid != NULL &&
- (write_domain != 0 ||
- read_domains & I915_GEM_DOMAIN_CPU)) {
- drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE,
- DRM_MEM_DRIVER);
- obj_priv->page_cpu_valid = NULL;
- }
obj->read_domains = read_domains;
dev->invalidate_domains |= invalidate_domains;
@@ -1423,47 +1567,94 @@ i915_gem_object_set_domain(struct drm_gem_object *obj,
obj->read_domains, obj->write_domain,
dev->invalidate_domains, dev->flush_domains);
#endif
- return 0;
}
/**
- * Set the read/write domain on a range of the object.
+ * Moves the object from a partially CPU read to a full one.
*
- * Currently only implemented for CPU reads, otherwise drops to normal
- * i915_gem_object_set_domain().
+ * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(),
+ * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU).
*/
-static int
-i915_gem_object_set_domain_range(struct drm_gem_object *obj,
- uint64_t offset,
- uint64_t size,
- uint32_t read_domains,
- uint32_t write_domain)
+static void
+i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj)
{
+ struct drm_device *dev = obj->dev;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
- int ret, i;
- if (obj->read_domains & I915_GEM_DOMAIN_CPU)
- return 0;
+ if (!obj_priv->page_cpu_valid)
+ return;
- if (read_domains != I915_GEM_DOMAIN_CPU ||
- write_domain != 0)
- return i915_gem_object_set_domain(obj,
- read_domains, write_domain);
+ /* If we're partially in the CPU read domain, finish moving it in.
+ */
+ if (obj->read_domains & I915_GEM_DOMAIN_CPU) {
+ int i;
- /* Wait on any GPU rendering to the object to be flushed. */
+ for (i = 0; i <= (obj->size - 1) / PAGE_SIZE; i++) {
+ if (obj_priv->page_cpu_valid[i])
+ continue;
+ drm_clflush_pages(obj_priv->page_list + i, 1);
+ }
+ drm_agp_chipset_flush(dev);
+ }
+
+ /* Free the page_cpu_valid mappings which are now stale, whether
+ * or not we've got I915_GEM_DOMAIN_CPU.
+ */
+ drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE,
+ DRM_MEM_DRIVER);
+ obj_priv->page_cpu_valid = NULL;
+}
+
+/**
+ * Set the CPU read domain on a range of the object.
+ *
+ * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's
+ * not entirely valid. The page_cpu_valid member of the object flags which
+ * pages have been flushed, and will be respected by
+ * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping
+ * of the whole object.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
+ uint64_t offset, uint64_t size)
+{
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ int i, ret;
+
+ if (offset == 0 && size == obj->size)
+ return i915_gem_object_set_to_cpu_domain(obj, 0);
+
+ i915_gem_object_flush_gpu_write_domain(obj);
+ /* Wait on any GPU rendering and flushing to occur. */
ret = i915_gem_object_wait_rendering(obj);
- if (ret)
+ if (ret != 0)
return ret;
+ i915_gem_object_flush_gtt_write_domain(obj);
+ /* If we're already fully in the CPU read domain, we're done. */
+ if (obj_priv->page_cpu_valid == NULL &&
+ (obj->read_domains & I915_GEM_DOMAIN_CPU) != 0)
+ return 0;
+
+ /* Otherwise, create/clear the per-page CPU read domain flag if we're
+ * newly adding I915_GEM_DOMAIN_CPU
+ */
if (obj_priv->page_cpu_valid == NULL) {
obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE,
DRM_MEM_DRIVER);
- }
+ if (obj_priv->page_cpu_valid == NULL)
+ return -ENOMEM;
+ } else if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0)
+ memset(obj_priv->page_cpu_valid, 0, obj->size / PAGE_SIZE);
/* Flush the cache on any pages that are still invalid from the CPU's
* perspective.
*/
- for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; i++) {
+ for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE;
+ i++) {
if (obj_priv->page_cpu_valid[i])
continue;
@@ -1472,39 +1663,14 @@ i915_gem_object_set_domain_range(struct drm_gem_object *obj,
obj_priv->page_cpu_valid[i] = 1;
}
- return 0;
-}
-
-/**
- * Once all of the objects have been set in the proper domain,
- * perform the necessary flush and invalidate operations.
- *
- * Returns the write domains flushed, for use in flush tracking.
- */
-static uint32_t
-i915_gem_dev_set_domain(struct drm_device *dev)
-{
- uint32_t flush_domains = dev->flush_domains;
-
- /*
- * Now that all the buffers are synced to the proper domains,
- * flush and invalidate the collected domains
+ /* It should now be out of any other write domains, and we can update
+ * the domain values for our changes.
*/
- if (dev->invalidate_domains | dev->flush_domains) {
-#if WATCH_EXEC
- DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
- __func__,
- dev->invalidate_domains,
- dev->flush_domains);
-#endif
- i915_gem_flush(dev,
- dev->invalidate_domains,
- dev->flush_domains);
- dev->invalidate_domains = 0;
- dev->flush_domains = 0;
- }
+ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
- return flush_domains;
+ obj->read_domains |= I915_GEM_DOMAIN_CPU;
+
+ return 0;
}
/**
@@ -1585,6 +1751,18 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
return -EINVAL;
}
+ if (reloc.write_domain & I915_GEM_DOMAIN_CPU ||
+ reloc.read_domains & I915_GEM_DOMAIN_CPU) {
+ DRM_ERROR("reloc with read/write CPU domains: "
+ "obj %p target %d offset %d "
+ "read %08x write %08x",
+ obj, reloc.target_handle,
+ (int) reloc.offset,
+ reloc.read_domains,
+ reloc.write_domain);
+ return -EINVAL;
+ }
+
if (reloc.write_domain && target_obj->pending_write_domain &&
reloc.write_domain != target_obj->pending_write_domain) {
DRM_ERROR("Write domain conflict: "
@@ -1625,19 +1803,11 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
continue;
}
- /* Now that we're going to actually write some data in,
- * make sure that any rendering using this buffer's contents
- * is completed.
- */
- i915_gem_object_wait_rendering(obj);
-
- /* As we're writing through the gtt, flush
- * any CPU writes before we write the relocations
- */
- if (obj->write_domain & I915_GEM_DOMAIN_CPU) {
- i915_gem_clflush_object(obj);
- drm_agp_chipset_flush(dev);
- obj->write_domain = 0;
+ ret = i915_gem_object_set_to_gtt_domain(obj, 1);
+ if (ret != 0) {
+ drm_gem_object_unreference(target_obj);
+ i915_gem_object_unpin(obj);
+ return -EINVAL;
}
/* Map the page containing the relocation we're going to
@@ -1779,6 +1949,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
int ret, i, pinned = 0;
uint64_t exec_offset;
uint32_t seqno, flush_domains;
+ int pin_tries;
#if WATCH_EXEC
DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
@@ -1827,14 +1998,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
return -EBUSY;
}
- /* Zero the gloabl flush/invalidate flags. These
- * will be modified as each object is bound to the
- * gtt
- */
- dev->invalidate_domains = 0;
- dev->flush_domains = 0;
-
- /* Look up object handles and perform the relocations */
+ /* Look up object handles */
for (i = 0; i < args->buffer_count; i++) {
object_list[i] = drm_gem_object_lookup(dev, file_priv,
exec_list[i].handle);
@@ -1844,17 +2008,39 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
ret = -EBADF;
goto err;
}
+ }
- object_list[i]->pending_read_domains = 0;
- object_list[i]->pending_write_domain = 0;
- ret = i915_gem_object_pin_and_relocate(object_list[i],
- file_priv,
- &exec_list[i]);
- if (ret) {
- DRM_ERROR("object bind and relocate failed %d\n", ret);
+ /* Pin and relocate */
+ for (pin_tries = 0; ; pin_tries++) {
+ ret = 0;
+ for (i = 0; i < args->buffer_count; i++) {
+ object_list[i]->pending_read_domains = 0;
+ object_list[i]->pending_write_domain = 0;
+ ret = i915_gem_object_pin_and_relocate(object_list[i],
+ file_priv,
+ &exec_list[i]);
+ if (ret)
+ break;
+ pinned = i + 1;
+ }
+ /* success */
+ if (ret == 0)
+ break;
+
+ /* error other than GTT full, or we've already tried again */
+ if (ret != -ENOMEM || pin_tries >= 1) {
+ DRM_ERROR("Failed to pin buffers %d\n", ret);
goto err;
}
- pinned = i + 1;
+
+ /* unpin all of our buffers */
+ for (i = 0; i < pinned; i++)
+ i915_gem_object_unpin(object_list[i]);
+
+ /* evict everyone we can from the aperture */
+ ret = i915_gem_evict_everything(dev);
+ if (ret)
+ goto err;
}
/* Set the pending read domains for the batch buffer to COMMAND */
@@ -1864,21 +2050,37 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
i915_verify_inactive(dev, __FILE__, __LINE__);
+ /* Zero the global flush/invalidate flags. These
+ * will be modified as new domains are computed
+ * for each object
+ */
+ dev->invalidate_domains = 0;
+ dev->flush_domains = 0;
+
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
- /* make sure all previous memory operations have passed */
- ret = i915_gem_object_set_domain(obj,
- obj->pending_read_domains,
- obj->pending_write_domain);
- if (ret)
- goto err;
+ /* Compute new gpu domains and update invalidate/flush */
+ i915_gem_object_set_to_gpu_domain(obj,
+ obj->pending_read_domains,
+ obj->pending_write_domain);
}
i915_verify_inactive(dev, __FILE__, __LINE__);
- /* Flush/invalidate caches and chipset buffer */
- flush_domains = i915_gem_dev_set_domain(dev);
+ if (dev->invalidate_domains | dev->flush_domains) {
+#if WATCH_EXEC
+ DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
+ __func__,
+ dev->invalidate_domains,
+ dev->flush_domains);
+#endif
+ i915_gem_flush(dev,
+ dev->invalidate_domains,
+ dev->flush_domains);
+ if (dev->flush_domains)
+ (void)i915_add_request(dev, dev->flush_domains);
+ }
i915_verify_inactive(dev, __FILE__, __LINE__);
@@ -1898,8 +2100,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
~0);
#endif
- (void)i915_add_request(dev, flush_domains);
-
/* Exec the batchbuffer */
ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset);
if (ret) {
@@ -1927,10 +2127,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
i915_file_priv->mm.last_gem_seqno = seqno;
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
- i915_gem_object_move_to_active(obj);
- obj_priv->last_rendering_seqno = seqno;
+ i915_gem_object_move_to_active(obj, seqno);
#if WATCH_LRU
DRM_INFO("%s: move to exec list %p\n", __func__, obj);
#endif
@@ -2061,11 +2259,7 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data,
/* XXX - flush the CPU caches for pinned objects
* as the X server doesn't manage domains yet
*/
- if (obj->write_domain & I915_GEM_DOMAIN_CPU) {
- i915_gem_clflush_object(obj);
- drm_agp_chipset_flush(dev);
- obj->write_domain = 0;
- }
+ i915_gem_object_flush_cpu_write_domain(obj);
args->offset = obj_priv->gtt_offset;
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
@@ -2167,29 +2361,6 @@ void i915_gem_free_object(struct drm_gem_object *obj)
drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
}
-static int
-i915_gem_set_domain(struct drm_gem_object *obj,
- struct drm_file *file_priv,
- uint32_t read_domains,
- uint32_t write_domain)
-{
- struct drm_device *dev = obj->dev;
- int ret;
- uint32_t flush_domains;
-
- BUG_ON(!mutex_is_locked(&dev->struct_mutex));
-
- ret = i915_gem_object_set_domain(obj, read_domains, write_domain);
- if (ret)
- return ret;
- flush_domains = i915_gem_dev_set_domain(obj->dev);
-
- if (flush_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT))
- (void) i915_add_request(dev, flush_domains);
-
- return 0;
-}
-
/** Unbinds all objects that are on the given buffer list. */
static int
i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head)
diff --git a/drivers/gpu/drm/i915/i915_gem_proc.c b/drivers/gpu/drm/i915/i915_gem_proc.c
index 93de15b4c9a..e8d5abe1250 100644
--- a/drivers/gpu/drm/i915/i915_gem_proc.c
+++ b/drivers/gpu/drm/i915/i915_gem_proc.c
@@ -166,10 +166,9 @@ static int i915_gem_request_info(char *buf, char **start, off_t offset,
list_for_each_entry(gem_request, &dev_priv->mm.request_list,
list)
{
- DRM_PROC_PRINT(" %d @ %d %08x\n",
+ DRM_PROC_PRINT(" %d @ %d\n",
gem_request->seqno,
- (int) (jiffies - gem_request->emitted_jiffies),
- gem_request->flush_domains);
+ (int) (jiffies - gem_request->emitted_jiffies));
}
if (len > request + offset)
return request;
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index e8b85ac4ca0..a8cb69469c6 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -119,9 +119,10 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
dcc & DCC_CHANNEL_XOR_DISABLE) {
swizzle_x = I915_BIT_6_SWIZZLE_9_10;
swizzle_y = I915_BIT_6_SWIZZLE_9;
- } else if (IS_I965GM(dev) || IS_GM45(dev)) {
- /* GM965 only does bit 11-based channel
- * randomization
+ } else if ((IS_I965GM(dev) || IS_GM45(dev)) &&
+ (dcc & DCC_CHANNEL_XOR_BIT_17) == 0) {
+ /* GM965/GM45 does either bit 11 or bit 17
+ * swizzling.
*/
swizzle_x = I915_BIT_6_SWIZZLE_9_10_11;
swizzle_y = I915_BIT_6_SWIZZLE_9_11;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0e476eba36e..9d24aaeb8a4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -522,6 +522,7 @@
#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0)
#define DCC_ADDRESSING_MODE_MASK (3 << 0)
#define DCC_CHANNEL_XOR_DISABLE (1 << 10)
+#define DCC_CHANNEL_XOR_BIT_17 (1 << 9)
/** 965 MCH register controlling DRAM channel configuration */
#define C0DRB3 0x10206
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 7a183789be9..3bbb871b25d 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -299,7 +299,6 @@ typedef struct drm_radeon_private {
atomic_t swi_emitted;
int vblank_crtc;
uint32_t irq_enable_reg;
- int irq_enabled;
uint32_t r500_disp_irq_reg;
struct radeon_surface surfaces[RADEON_MAX_SURFACES];
diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c
index 97c0599fdb1..99be11418ac 100644
--- a/drivers/gpu/drm/radeon/radeon_irq.c
+++ b/drivers/gpu/drm/radeon/radeon_irq.c
@@ -44,7 +44,8 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state)
else
dev_priv->irq_enable_reg &= ~mask;
- RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
+ if (!dev->irq_enabled)
+ RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
}
static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state)
@@ -56,7 +57,8 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state)
else
dev_priv->r500_disp_irq_reg &= ~mask;
- RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg);
+ if (!dev->irq_enabled)
+ RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg);
}
int radeon_enable_vblank(struct drm_device *dev, int crtc)
@@ -355,8 +357,6 @@ void radeon_driver_irq_uninstall(struct drm_device * dev)
if (!dev_priv)
return;
- dev_priv->irq_enabled = 0;
-
if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690)
RADEON_WRITE(R500_DxMODE_INT_MASK, 0);
/* Disable *all* interrupts */
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index f4d22ae9d29..e5a8dae4a28 100644
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -92,7 +92,7 @@ static void highlander_i2c_setup(struct highlander_i2c_dev *dev)
static void smbus_write_data(u8 *src, u16 *dst, int len)
{
for (; len > 1; len -= 2) {
- *dst++ = be16_to_cpup((u16 *)src);
+ *dst++ = be16_to_cpup((__be16 *)src);
src += 2;
}
@@ -103,7 +103,7 @@ static void smbus_write_data(u8 *src, u16 *dst, int len)
static void smbus_read_data(u16 *src, u8 *dst, int len)
{
for (; len > 1; len -= 2) {
- *(u16 *)dst = cpu_to_be16p(src++);
+ *(__be16 *)dst = cpu_to_be16p(src++);
dst += 2;
}
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index dcf2045b522..0bdb2d7f057 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -486,7 +486,7 @@ static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd(
if (cmd->type == MSP_TWI_CMD_WRITE ||
cmd->type == MSP_TWI_CMD_WRITE_READ) {
- __be64 tmp = cpu_to_be64p((u64 *)cmd->write_data);
+ u64 tmp = be64_to_cpup((__be64 *)cmd->write_data);
tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8;
dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp);
pmcmsptwi_writel(tmp & 0x00000000ffffffffLL,
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 6d7401772a8..e6857e01d1b 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -669,10 +669,12 @@ config BLK_DEV_CELLEB
endif
+# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
config BLK_DEV_IDE_PMAC
tristate "PowerMac on-board IDE support"
depends on PPC_PMAC && IDE=y
select IDE_TIMINGS
+ select BLK_DEV_IDEDMA_PCI
help
This driver provides support for the on-board IDE controller on
most of the recent Apple Power Macintoshes and PowerBooks.
@@ -689,16 +691,6 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST
CD-ROM on hda. This option changes this to more natural hda for
hard disk and hdc for CD-ROM.
-config BLK_DEV_IDEDMA_PMAC
- bool "PowerMac IDE DMA support"
- depends on BLK_DEV_IDE_PMAC
- select BLK_DEV_IDEDMA_PCI
- help
- This option allows the driver for the on-board IDE controller on
- Power Macintoshes and PowerBooks to use DMA (direct memory access)
- to transfer data to and from memory. Saying Y is safe and improves
- performance.
-
config BLK_DEV_IDE_AU1XXX
bool "IDE for AMD Alchemy Au1200"
depends on SOC_AU1200
@@ -912,7 +904,7 @@ config BLK_DEV_UMC8672
endif
config BLK_DEV_IDEDMA
- def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
+ def_bool BLK_DEV_IDEDMA_SFF || \
BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
endif # IDE
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 7d275b2af3e..cc35d6dbd41 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -208,8 +208,10 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
*/
if (drive->hwif->dma_ops == NULL)
break;
- if (drive->dev_flags & IDE_DFLAG_USING_DMA)
- ide_set_dma(drive);
+ /*
+ * TODO: respect IDE_DFLAG_USING_DMA
+ */
+ ide_set_dma(drive);
break;
}
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 2e19d629853..7c481bb56fa 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -66,7 +66,6 @@ typedef struct pmac_ide_hwif {
struct macio_dev *mdev;
u32 timings[4];
volatile u32 __iomem * *kauai_fcr;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
/* Those fields are duplicating what is in hwif. We currently
* can't use the hwif ones because of some assumptions that are
* beeing done by the generic code about the kind of dma controller
@@ -74,8 +73,6 @@ typedef struct pmac_ide_hwif {
*/
volatile struct dbdma_regs __iomem * dma_regs;
struct dbdma_cmd* dma_table_cpu;
-#endif
-
} pmac_ide_hwif_t;
enum {
@@ -222,8 +219,6 @@ static const char* model_name[] = {
#define KAUAI_FCR_UATA_RESET_N 0x00000002
#define KAUAI_FCR_UATA_ENABLE 0x00000001
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
/* Rounded Multiword DMA timings
*
* I gave up finding a generic formula for all controller
@@ -413,8 +408,6 @@ static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
static void pmac_ide_selectproc(ide_drive_t *drive);
static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-
#define PMAC_IDE_REG(x) \
((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
@@ -584,8 +577,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
pmac_ide_do_update_timings(drive);
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
/*
* Calculate KeyLargo ATA/66 UDMA timings
*/
@@ -786,7 +777,6 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
drive->name, speed & 0xf, *timings);
#endif
}
-#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
@@ -804,7 +794,6 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
tl[0] = *timings;
tl[1] = *timings2;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
if (speed >= XFER_UDMA_0) {
if (pmif->kind == controller_kl_ata4)
ret = set_timings_udma_ata4(&tl[0], speed);
@@ -817,7 +806,7 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
ret = -1;
} else
set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
if (ret)
return;
@@ -1008,9 +997,7 @@ static const struct ide_port_info pmac_port_info = {
.chipset = ide_pmac,
.tp_ops = &pmac_tp_ops,
.port_ops = &pmac_ide_port_ops,
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
.dma_ops = &pmac_dma_ops,
-#endif
.host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
IDE_HFLAG_POST_SET_MODE |
IDE_HFLAG_MMIO |
@@ -1182,7 +1169,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
pmif->regbase = regbase;
pmif->irq = irq;
pmif->kauai_fcr = NULL;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+
if (macio_resource_count(mdev) >= 2) {
if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
printk(KERN_WARNING "ide-pmac: can't request DMA "
@@ -1192,7 +1179,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
} else
pmif->dma_regs = NULL;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
dev_set_drvdata(&mdev->ofdev.dev, pmif);
memset(&hw, 0, sizeof(hw));
@@ -1300,9 +1287,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
base = ioremap(rbase, rlen);
pmif->regbase = (unsigned long) base + 0x2000;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
pmif->dma_regs = base + 0x1000;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
pmif->kauai_fcr = base;
pmif->irq = pdev->irq;
@@ -1434,8 +1419,6 @@ out:
return error;
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
/*
* pmac_ide_build_dmatable builds the DBDMA command list
* for a transfer and sets the DBDMA channel to point to it.
@@ -1723,13 +1706,6 @@ static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
return 0;
}
-#else
-static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
- const struct ide_port_info *d)
-{
- return -EOPNOTSUPP;
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
module_init(pmac_ide_probe);
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c
index 7defa0ae201..a687a7dfea6 100644
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -550,7 +550,7 @@ static const struct ide_dma_ops sgiioc4_dma_ops = {
.dma_timeout = ide_dma_timeout,
};
-static const struct ide_port_info sgiioc4_port_info __devinitdata = {
+static const struct ide_port_info sgiioc4_port_info __devinitconst = {
.name = DRV_NAME,
.chipset = ide_pci,
.init_dma = ide_dma_sgiioc4,
@@ -633,7 +633,7 @@ out:
return ret;
}
-int
+int __devinit
ioc4_ide_attach_one(struct ioc4_driver_data *idd)
{
/* PCI-RT does not bring out IDE connection.
@@ -645,7 +645,7 @@ ioc4_ide_attach_one(struct ioc4_driver_data *idd)
return pci_init_sgiioc4(idd->idd_pdev);
}
-static struct ioc4_submodule ioc4_ide_submodule = {
+static struct ioc4_submodule __devinitdata ioc4_ide_submodule = {
.is_name = "IOC4_ide",
.is_owner = THIS_MODULE,
.is_probe = ioc4_ide_attach_one,
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 9e39f73282e..d333ae22459 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -1685,6 +1685,7 @@ static int nodemgr_host_thread(void *data)
g = get_hpsb_generation(host);
for (i = 0; i < 4 ; i++) {
msleep_interruptible(63);
+ try_to_freeze();
if (kthread_should_stop())
goto exit;
@@ -1725,6 +1726,7 @@ static int nodemgr_host_thread(void *data)
/* Sleep 3 seconds */
for (i = 3000/200; i; i--) {
msleep_interruptible(200);
+ try_to_freeze();
if (kthread_should_stop())
goto exit;
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index a63161aec48..04e5fd742c2 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -668,7 +668,7 @@ static void check_for_valid_limits(struct io_restrictions *rs)
if (!rs->max_segment_size)
rs->max_segment_size = MAX_SEGMENT_SIZE;
if (!rs->seg_boundary_mask)
- rs->seg_boundary_mask = -1;
+ rs->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
if (!rs->bounce_pfn)
rs->bounce_pfn = -1;
}
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 84bdc2ee69e..a443e136dc4 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -354,7 +354,7 @@ static inline void i2o_block_sglist_free(struct i2o_block_request *ireq)
* @req: the request to prepare
*
* Allocate the necessary i2o_block_request struct and connect it to
- * the request. This is needed that we not loose the SG list later on.
+ * the request. This is needed that we not lose the SG list later on.
*
* Returns BLKPREP_OK on success or BLKPREP_DEFER on failure.
*/
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index be2b5926d26..6e53a30bfd3 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -49,7 +49,6 @@ static int i2o_hrt_get(struct i2o_controller *c);
/**
* i2o_msg_get_wait - obtain an I2O message from the IOP
* @c: I2O controller
- * @msg: pointer to a I2O message pointer
* @wait: how long to wait until timeout
*
* This function waits up to wait seconds for a message slot to be
diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c
index 8c389d606c3..3ee698ad859 100644
--- a/drivers/misc/sgi-gru/grufault.c
+++ b/drivers/misc/sgi-gru/grufault.c
@@ -254,7 +254,11 @@ static int atomic_pte_lookup(struct vm_area_struct *vma, unsigned long vaddr,
return 1;
*paddr = pte_pfn(pte) << PAGE_SHIFT;
+#ifdef CONFIG_HUGETLB_PAGE
*pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT;
+#else
+ *pageshift = PAGE_SHIFT;
+#endif
return 0;
err:
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 76a76751da3..6659b2275c0 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -37,9 +37,9 @@
#define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */
#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */
#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */
-#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
+#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */
-#define OPCODE_BE 0xc7 /* Erase whole flash block */
+#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */
#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
#define OPCODE_RDID 0x9f /* Read JEDEC ID */
@@ -167,7 +167,7 @@ static int wait_till_ready(struct m25p *flash)
*
* Returns 0 if successful, non-zero otherwise.
*/
-static int erase_block(struct m25p *flash)
+static int erase_chip(struct m25p *flash)
{
DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB\n",
flash->spi->dev.bus_id, __func__,
@@ -181,7 +181,7 @@ static int erase_block(struct m25p *flash)
write_enable(flash);
/* Set up command buffer. */
- flash->command[0] = OPCODE_BE;
+ flash->command[0] = OPCODE_CHIP_ERASE;
spi_write(flash->spi, flash->command, 1);
@@ -250,15 +250,18 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
mutex_lock(&flash->lock);
- /* REVISIT in some cases we could speed up erasing large regions
- * by using OPCODE_SE instead of OPCODE_BE_4K
- */
-
- /* now erase those sectors */
- if (len == flash->mtd.size && erase_block(flash)) {
+ /* whole-chip erase? */
+ if (len == flash->mtd.size && erase_chip(flash)) {
instr->state = MTD_ERASE_FAILED;
mutex_unlock(&flash->lock);
return -EIO;
+
+ /* REVISIT in some cases we could speed up erasing large regions
+ * by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up
+ * to use "small sector erase", but that's not always optimal.
+ */
+
+ /* "sector"-at-a-time erase */
} else {
while (len) {
if (erase_sector(flash, addr)) {
@@ -574,10 +577,11 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
for (tmp = 0, info = m25p_data;
tmp < ARRAY_SIZE(m25p_data);
tmp++, info++) {
- if (info->jedec_id == jedec)
- if (ext_jedec != 0 && info->ext_id != ext_jedec)
+ if (info->jedec_id == jedec) {
+ if (info->ext_id != 0 && info->ext_id != ext_jedec)
continue;
return info;
+ }
}
dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
return NULL;
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 42d844f8f6b..dfbf3f270ce 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -19,7 +19,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/concat.h>
-#include <asm/io.h>
+#include <linux/io.h>
#define MAX_RESOURCES 4
@@ -27,7 +27,6 @@ struct physmap_flash_info {
struct mtd_info *mtd[MAX_RESOURCES];
struct mtd_info *cmtd;
struct map_info map[MAX_RESOURCES];
- struct resource *res;
#ifdef CONFIG_MTD_PARTITIONS
int nr_parts;
struct mtd_partition *parts;
@@ -70,16 +69,7 @@ static int physmap_flash_remove(struct platform_device *dev)
#endif
map_destroy(info->mtd[i]);
}
-
- if (info->map[i].virt != NULL)
- iounmap(info->map[i].virt);
- }
-
- if (info->res != NULL) {
- release_resource(info->res);
- kfree(info->res);
}
-
return 0;
}
@@ -101,7 +91,8 @@ static int physmap_flash_probe(struct platform_device *dev)
if (physmap_data == NULL)
return -ENODEV;
- info = kzalloc(sizeof(struct physmap_flash_info), GFP_KERNEL);
+ info = devm_kzalloc(&dev->dev, sizeof(struct physmap_flash_info),
+ GFP_KERNEL);
if (info == NULL) {
err = -ENOMEM;
goto err_out;
@@ -114,10 +105,10 @@ static int physmap_flash_probe(struct platform_device *dev)
(unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1),
(unsigned long long)dev->resource[i].start);
- info->res = request_mem_region(dev->resource[i].start,
- dev->resource[i].end - dev->resource[i].start + 1,
- dev->dev.bus_id);
- if (info->res == NULL) {
+ if (!devm_request_mem_region(&dev->dev,
+ dev->resource[i].start,
+ dev->resource[i].end - dev->resource[i].start + 1,
+ dev->dev.bus_id)) {
dev_err(&dev->dev, "Could not reserve memory region\n");
err = -ENOMEM;
goto err_out;
@@ -129,7 +120,8 @@ static int physmap_flash_probe(struct platform_device *dev)
info->map[i].bankwidth = physmap_data->width;
info->map[i].set_vpp = physmap_data->set_vpp;
- info->map[i].virt = ioremap(info->map[i].phys, info->map[i].size);
+ info->map[i].virt = devm_ioremap(&dev->dev, info->map[i].phys,
+ info->map[i].size);
if (info->map[i].virt == NULL) {
dev_err(&dev->dev, "Failed to ioremap flash region\n");
err = EIO;
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 024e3fffd4b..a83192f80eb 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -163,9 +163,11 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun,
ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0);
#ifdef CONFIG_MTD_OF_PARTS
- if (ret == 0)
- ret = of_mtd_parse_partitions(fun->dev, &fun->mtd,
- flash_np, &fun->parts);
+ if (ret == 0) {
+ ret = of_mtd_parse_partitions(fun->dev, flash_np, &fun->parts);
+ if (ret < 0)
+ goto err;
+ }
#endif
if (ret > 0)
ret = add_mtd_partitions(&fun->mtd, fun->parts, ret);
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 75c89903902..9bd6c9ac844 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -141,6 +141,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev,
}
lpcctl = pci_resource_start(pdev, 0);
+ pci_dev_put(pdev);
if (!request_region(lpcctl, 4, driver_name)) {
err = -EBUSY;
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index c0fa9c9edf0..15f0a26730a 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -269,6 +269,7 @@ static struct pxa3xx_nand_timing stm2GbX16_timing = {
static struct pxa3xx_nand_flash stm2GbX16 = {
.timing = &stm2GbX16_timing,
+ .cmdset = &largepage_cmdset,
.page_per_block = 64,
.page_size = 2048,
.flash_width = 16,
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index e39b21d3e16..a7e4d985f5e 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -32,19 +32,18 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/mach/flash.h>
-#include <asm/arch/gpmc.h>
-#include <asm/arch/onenand.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pm.h>
+#include <mach/gpmc.h>
+#include <mach/onenand.h>
+#include <mach/gpio.h>
+#include <mach/pm.h>
-#include <linux/dma-mapping.h>
-#include <asm/dma-mapping.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
#define DRIVER_NAME "omap2-onenand"
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 92f2ace7ca6..f2a5963b5a9 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1939,12 +1939,17 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
ctrl |= E1000_CTRL_PHY_RST;
}
ret_val = e1000_acquire_swflag_ich8lan(hw);
+ /* Whether or not the swflag was acquired, we need to reset the part */
hw_dbg(hw, "Issuing a global reset to ich8lan\n");
ew32(CTRL, (ctrl | E1000_CTRL_RST));
msleep(20);
- /* release the swflag because it is not reset by hardware reset */
- e1000_release_swflag_ich8lan(hw);
+ if (!ret_val) {
+ /* release the swflag because it is not reset by
+ * hardware reset
+ */
+ e1000_release_swflag_ich8lan(hw);
+ }
ret_val = e1000e_get_auto_rd_done(hw);
if (ret_val) {
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 6f935cd3017..f4b0beec4d1 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1141,6 +1141,70 @@ static int gem_start_xmit(struct sk_buff *skb, struct net_device *dev)
return NETDEV_TX_OK;
}
+static void gem_pcs_reset(struct gem *gp)
+{
+ int limit;
+ u32 val;
+
+ /* Reset PCS unit. */
+ val = readl(gp->regs + PCS_MIICTRL);
+ val |= PCS_MIICTRL_RST;
+ writel(val, gp->regs + PCS_MIICTRL);
+
+ limit = 32;
+ while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
+ udelay(100);
+ if (limit-- <= 0)
+ break;
+ }
+ if (limit <= 0)
+ printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
+ gp->dev->name);
+}
+
+static void gem_pcs_reinit_adv(struct gem *gp)
+{
+ u32 val;
+
+ /* Make sure PCS is disabled while changing advertisement
+ * configuration.
+ */
+ val = readl(gp->regs + PCS_CFG);
+ val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
+ writel(val, gp->regs + PCS_CFG);
+
+ /* Advertise all capabilities except assymetric
+ * pause.
+ */
+ val = readl(gp->regs + PCS_MIIADV);
+ val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
+ PCS_MIIADV_SP | PCS_MIIADV_AP);
+ writel(val, gp->regs + PCS_MIIADV);
+
+ /* Enable and restart auto-negotiation, disable wrapback/loopback,
+ * and re-enable PCS.
+ */
+ val = readl(gp->regs + PCS_MIICTRL);
+ val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
+ val &= ~PCS_MIICTRL_WB;
+ writel(val, gp->regs + PCS_MIICTRL);
+
+ val = readl(gp->regs + PCS_CFG);
+ val |= PCS_CFG_ENABLE;
+ writel(val, gp->regs + PCS_CFG);
+
+ /* Make sure serialink loopback is off. The meaning
+ * of this bit is logically inverted based upon whether
+ * you are in Serialink or SERDES mode.
+ */
+ val = readl(gp->regs + PCS_SCTRL);
+ if (gp->phy_type == phy_serialink)
+ val &= ~PCS_SCTRL_LOOP;
+ else
+ val |= PCS_SCTRL_LOOP;
+ writel(val, gp->regs + PCS_SCTRL);
+}
+
#define STOP_TRIES 32
/* Must be invoked under gp->lock and gp->tx_lock. */
@@ -1167,6 +1231,9 @@ static void gem_reset(struct gem *gp)
if (limit <= 0)
printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
+
+ if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
+ gem_pcs_reinit_adv(gp);
}
/* Must be invoked under gp->lock and gp->tx_lock. */
@@ -1323,7 +1390,7 @@ static int gem_set_link_modes(struct gem *gp)
gp->phy_type == phy_serdes) {
u32 pcs_lpa = readl(gp->regs + PCS_MIILP);
- if (pcs_lpa & PCS_MIIADV_FD)
+ if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes)
full_duplex = 1;
speed = SPEED_1000;
}
@@ -1487,6 +1554,9 @@ static void gem_link_timer(unsigned long data)
val = readl(gp->regs + PCS_MIISTAT);
if ((val & PCS_MIISTAT_LS) != 0) {
+ if (gp->lstate == link_up)
+ goto restart;
+
gp->lstate = link_up;
netif_carrier_on(gp->dev);
(void)gem_set_link_modes(gp);
@@ -1707,61 +1777,8 @@ static void gem_init_phy(struct gem *gp)
if (gp->phy_mii.def && gp->phy_mii.def->ops->init)
gp->phy_mii.def->ops->init(&gp->phy_mii);
} else {
- u32 val;
- int limit;
-
- /* Reset PCS unit. */
- val = readl(gp->regs + PCS_MIICTRL);
- val |= PCS_MIICTRL_RST;
- writel(val, gp->regs + PCS_MIICTRL);
-
- limit = 32;
- while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
- udelay(100);
- if (limit-- <= 0)
- break;
- }
- if (limit <= 0)
- printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
- gp->dev->name);
-
- /* Make sure PCS is disabled while changing advertisement
- * configuration.
- */
- val = readl(gp->regs + PCS_CFG);
- val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
- writel(val, gp->regs + PCS_CFG);
-
- /* Advertise all capabilities except assymetric
- * pause.
- */
- val = readl(gp->regs + PCS_MIIADV);
- val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
- PCS_MIIADV_SP | PCS_MIIADV_AP);
- writel(val, gp->regs + PCS_MIIADV);
-
- /* Enable and restart auto-negotiation, disable wrapback/loopback,
- * and re-enable PCS.
- */
- val = readl(gp->regs + PCS_MIICTRL);
- val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
- val &= ~PCS_MIICTRL_WB;
- writel(val, gp->regs + PCS_MIICTRL);
-
- val = readl(gp->regs + PCS_CFG);
- val |= PCS_CFG_ENABLE;
- writel(val, gp->regs + PCS_CFG);
-
- /* Make sure serialink loopback is off. The meaning
- * of this bit is logically inverted based upon whether
- * you are in Serialink or SERDES mode.
- */
- val = readl(gp->regs + PCS_SCTRL);
- if (gp->phy_type == phy_serialink)
- val &= ~PCS_SCTRL_LOOP;
- else
- val |= PCS_SCTRL_LOOP;
- writel(val, gp->regs + PCS_SCTRL);
+ gem_pcs_reset(gp);
+ gem_pcs_reinit_adv(gp);
}
/* Default aneg parameters */
@@ -2679,6 +2696,21 @@ static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->speed = 0;
cmd->duplex = cmd->port = cmd->phy_address =
cmd->transceiver = cmd->autoneg = 0;
+
+ /* serdes means usually a Fibre connector, with most fixed */
+ if (gp->phy_type == phy_serdes) {
+ cmd->port = PORT_FIBRE;
+ cmd->supported = (SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE | SUPPORTED_Autoneg |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+ cmd->advertising = cmd->supported;
+ cmd->transceiver = XCVR_INTERNAL;
+ if (gp->lstate == link_up)
+ cmd->speed = SPEED_1000;
+ cmd->duplex = DUPLEX_FULL;
+ cmd->autoneg = 1;
+ }
}
cmd->maxtxpkt = cmd->maxrxpkt = 0;
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 8f63f4c6b85..9aad608bcf3 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -16,6 +16,7 @@
#include <linux/pm.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/pci-aspm.h>
#include "../pci.h"
@@ -161,11 +162,12 @@ static void pcie_check_clock_pm(struct pci_dev *pdev)
*/
static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
{
- int pos, child_pos;
+ int pos, child_pos, i = 0;
u16 reg16 = 0;
struct pci_dev *child_dev;
int same_clock = 1;
-
+ unsigned long start_jiffies;
+ u16 child_regs[8], parent_reg;
/*
* all functions of a slot should have the same Slot Clock
* Configuration, so just check one function
@@ -191,16 +193,19 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
&reg16);
+ child_regs[i] = reg16;
if (same_clock)
reg16 |= PCI_EXP_LNKCTL_CCC;
else
reg16 &= ~PCI_EXP_LNKCTL_CCC;
pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
reg16);
+ i++;
}
/* Configure upstream component */
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &reg16);
+ parent_reg = reg16;
if (same_clock)
reg16 |= PCI_EXP_LNKCTL_CCC;
else
@@ -212,12 +217,30 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
/* Wait for link training end */
- while (1) {
+ /* break out after waiting for 1 second */
+ start_jiffies = jiffies;
+ while ((jiffies - start_jiffies) < HZ) {
pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, &reg16);
if (!(reg16 & PCI_EXP_LNKSTA_LT))
break;
cpu_relax();
}
+ /* training failed -> recover */
+ if ((jiffies - start_jiffies) >= HZ) {
+ dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure"
+ " common clock\n");
+ i = 0;
+ list_for_each_entry(child_dev, &pdev->subordinate->devices,
+ bus_list) {
+ child_pos = pci_find_capability(child_dev,
+ PCI_CAP_ID_EXP);
+ pci_write_config_word(child_dev,
+ child_pos + PCI_EXP_LNKCTL,
+ child_regs[i]);
+ i++;
+ }
+ pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, parent_reg);
+ }
}
/*
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 4dd1c3e157a..5a8ccb4f604 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -253,6 +253,7 @@ placeholder:
__func__, pci_domain_nr(parent), parent->number, slot_nr);
out:
+ kfree(slot_name);
up_write(&pci_bus_sem);
return slot;
err:
diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c
index bb7338863fb..b59d4115d20 100644
--- a/drivers/pcmcia/bfin_cf_pcmcia.c
+++ b/drivers/pcmcia/bfin_cf_pcmcia.c
@@ -334,6 +334,6 @@ static void __exit bfin_cf_exit(void)
module_init(bfin_cf_init);
module_exit(bfin_cf_exit);
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>")
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-ds1672.c b/drivers/rtc/rtc-ds1672.c
index 341d7a5b45a..4e91419e891 100644
--- a/drivers/rtc/rtc-ds1672.c
+++ b/drivers/rtc/rtc-ds1672.c
@@ -209,12 +209,18 @@ static int ds1672_probe(struct i2c_client *client,
return err;
}
+static struct i2c_device_id ds1672_id[] = {
+ { "ds1672", 0 },
+ { }
+};
+
static struct i2c_driver ds1672_driver = {
.driver = {
.name = "rtc-ds1672",
},
.probe = &ds1672_probe,
.remove = &ds1672_remove,
+ .id_table = ds1672_id,
};
static int __init ds1672_init(void)
diff --git a/drivers/rtc/rtc-max6900.c b/drivers/rtc/rtc-max6900.c
index 80782798763..a4f6665ab3c 100644
--- a/drivers/rtc/rtc-max6900.c
+++ b/drivers/rtc/rtc-max6900.c
@@ -247,12 +247,18 @@ max6900_probe(struct i2c_client *client, const struct i2c_device_id *id)
return 0;
}
+static struct i2c_device_id max6900_id[] = {
+ { "max6900", 0 },
+ { }
+};
+
static struct i2c_driver max6900_driver = {
.driver = {
.name = "rtc-max6900",
},
.probe = max6900_probe,
.remove = max6900_remove,
+ .id_table = max6900_id,
};
static int __init max6900_init(void)
diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c
index abe87a4d266..01d8da9afdc 100644
--- a/drivers/rtc/rtc-twl4030.c
+++ b/drivers/rtc/rtc-twl4030.c
@@ -337,7 +337,7 @@ static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd,
}
#else
-#define omap_rtc_ioctl NULL
+#define twl4030_rtc_ioctl NULL
#endif
static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index 9aec4ca64e5..f7da7530875 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -107,6 +107,7 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
struct request *req;
int ret;
+retry:
req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
if (!req)
return SCSI_DH_RES_TEMP_UNAVAIL;
@@ -121,7 +122,6 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
req->sense_len = 0;
-retry:
ret = blk_execute_rq(req->q, NULL, req, 1);
if (ret == -EIO) {
if (req->sense_len > 0) {
@@ -136,8 +136,10 @@ retry:
h->path_state = HP_SW_PATH_ACTIVE;
ret = SCSI_DH_OK;
}
- if (ret == SCSI_DH_IMM_RETRY)
+ if (ret == SCSI_DH_IMM_RETRY) {
+ blk_put_request(req);
goto retry;
+ }
if (ret == SCSI_DH_DEV_OFFLINED) {
h->path_state = HP_SW_PATH_PASSIVE;
ret = SCSI_DH_OK;
@@ -200,6 +202,7 @@ static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h)
struct request *req;
int ret, retry;
+retry:
req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
if (!req)
return SCSI_DH_RES_TEMP_UNAVAIL;
@@ -216,7 +219,6 @@ static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h)
req->sense_len = 0;
retry = h->retries;
-retry:
ret = blk_execute_rq(req->q, NULL, req, 1);
if (ret == -EIO) {
if (req->sense_len > 0) {
@@ -231,8 +233,10 @@ retry:
ret = SCSI_DH_OK;
if (ret == SCSI_DH_RETRY) {
- if (--retry)
+ if (--retry) {
+ blk_put_request(req);
goto retry;
+ }
ret = SCSI_DH_IO;
}
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index c9e1242eaf2..5081b3981d3 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -757,7 +757,7 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode,
* access to the device is prohibited.
*/
error = scsi_nonblockable_ioctl(sdp, cmd, p,
- (mode & FMODE_NDELAY_NOW) != 0);
+ (mode & FMODE_NDELAY) != 0);
if (!scsi_block_when_processing_errors(sdp) || !error)
return error;
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 62b6633e3a9..45b66b98a51 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -521,7 +521,7 @@ static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
* if it doesn't recognise the ioctl
*/
ret = scsi_nonblockable_ioctl(sdev, cmd, argp,
- (mode & FMODE_NDELAY_NOW) != 0);
+ (mode & FMODE_NDELAY) != 0);
if (ret != -ENODEV)
return ret;
return scsi_ioctl(sdev, cmd, argp);
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index 6dd98f9fb89..ae3699d77dd 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -2149,7 +2149,7 @@ out4:
return ret;
}
-static struct ioc3_submodule ioc3uart_submodule = {
+static struct ioc3_submodule ioc3uart_ops = {
.name = "IOC3uart",
.probe = ioc3uart_probe,
.remove = ioc3uart_remove,
@@ -2173,7 +2173,7 @@ static int __devinit ioc3uart_init(void)
__func__);
return ret;
}
- ret = ioc3_register_submodule(&ioc3uart_submodule);
+ ret = ioc3_register_submodule(&ioc3uart_ops);
if (ret)
uart_unregister_driver(&ioc3_uart);
return ret;
@@ -2181,7 +2181,7 @@ static int __devinit ioc3uart_init(void)
static void __devexit ioc3uart_exit(void)
{
- ioc3_unregister_submodule(&ioc3uart_submodule);
+ ioc3_unregister_submodule(&ioc3uart_ops);
uart_unregister_driver(&ioc3_uart);
}
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 6117d3db0b6..28c00c3d58f 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -591,8 +591,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
/* Update the per-port timeout */
uart_update_timeout(port, new->c_cflag, baud);
- /* Do our best to flush TX & RX, so we don't loose anything */
- /* But we don't wait indefinitly ! */
+ /* Do our best to flush TX & RX, so we don't lose anything */
+ /* But we don't wait indefinitely ! */
j = 5000000; /* Maximum wait */
/* FIXME Can't receive chars since set_termios might be called at early
* boot for the console, all stuff is not yet ready to receive at that
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 317d239ab74..29cbb0afef8 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -177,5 +177,5 @@ module_exit(s3c2440_serial_exit);
MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPLi v2");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:s3c2440-uart");
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 51d7bdea286..aad1359a3eb 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1498,7 +1498,7 @@ static int ftdi_open(struct tty_struct *tty,
priv->interface, buf, 0, WDR_TIMEOUT);
/* Termios defaults are set by usb_serial_init. We don't change
- port->tty->termios - this would loose speed settings, etc.
+ port->tty->termios - this would lose speed settings, etc.
This is same behaviour as serial.c/rs_open() - Kuba */
/* ftdi_set_termios will send usb control messages */
diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c
index a547e5d4c8b..a469a3d6edc 100644
--- a/drivers/video/aty/radeon_accel.c
+++ b/drivers/video/aty/radeon_accel.c
@@ -5,61 +5,61 @@
* --dte
*/
-#define FLUSH_CACHE_WORKAROUND 1
-
-void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries)
+static void radeon_fixup_offset(struct radeonfb_info *rinfo)
{
- int i;
+ u32 local_base;
+
+ /* *** Ugly workaround *** */
+ /*
+ * On some platforms, the video memory is mapped at 0 in radeon chip space
+ * (like PPCs) by the firmware. X will always move it up so that it's seen
+ * by the chip to be at the same address as the PCI BAR.
+ * That means that when switching back from X, there is a mismatch between
+ * the offsets programmed into the engine. This means that potentially,
+ * accel operations done before radeonfb has a chance to re-init the engine
+ * will have incorrect offsets, and potentially trash system memory !
+ *
+ * The correct fix is for fbcon to never call any accel op before the engine
+ * has properly been re-initialized (by a call to set_var), but this is a
+ * complex fix. This workaround in the meantime, called before every accel
+ * operation, makes sure the offsets are in sync.
+ */
- for (i=0; i<2000000; i++) {
- rinfo->fifo_free = INREG(RBBM_STATUS) & 0x7f;
- if (rinfo->fifo_free >= entries)
- return;
- udelay(10);
- }
- printk(KERN_ERR "radeonfb: FIFO Timeout !\n");
- /* XXX Todo: attempt to reset the engine */
-}
+ radeon_fifo_wait (1);
+ local_base = INREG(MC_FB_LOCATION) << 16;
+ if (local_base == rinfo->fb_local_base)
+ return;
-static inline void radeon_fifo_wait(struct radeonfb_info *rinfo, int entries)
-{
- if (entries <= rinfo->fifo_free)
- rinfo->fifo_free -= entries;
- else
- radeon_fifo_update_and_wait(rinfo, entries);
-}
+ rinfo->fb_local_base = local_base;
-static inline void radeonfb_set_creg(struct radeonfb_info *rinfo, u32 reg,
- u32 *cache, u32 new_val)
-{
- if (new_val == *cache)
- return;
- *cache = new_val;
- radeon_fifo_wait(rinfo, 1);
- OUTREG(reg, new_val);
+ radeon_fifo_wait (3);
+ OUTREG(DEFAULT_PITCH_OFFSET, (rinfo->pitch << 0x16) |
+ (rinfo->fb_local_base >> 10));
+ OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
+ OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
}
static void radeonfb_prim_fillrect(struct radeonfb_info *rinfo,
const struct fb_fillrect *region)
{
- radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
- rinfo->dp_gui_mc_base | GMC_BRUSH_SOLID_COLOR | ROP3_P);
- radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
- DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
- radeonfb_set_creg(rinfo, DP_BRUSH_FRGD_CLR, &rinfo->dp_brush_fg_cache,
- region->color);
-
- /* Ensure the dst cache is flushed and the engine idle before
- * issuing the operation.
- *
- * This works around engine lockups on some cards
- */
-#if FLUSH_CACHE_WORKAROUND
- radeon_fifo_wait(rinfo, 2);
+ radeon_fifo_wait(4);
+
+ OUTREG(DP_GUI_MASTER_CNTL,
+ rinfo->dp_gui_master_cntl /* contains, like GMC_DST_32BPP */
+ | GMC_BRUSH_SOLID_COLOR
+ | ROP3_P);
+ if (radeon_get_dstbpp(rinfo->depth) != DST_8BPP)
+ OUTREG(DP_BRUSH_FRGD_CLR, rinfo->pseudo_palette[region->color]);
+ else
+ OUTREG(DP_BRUSH_FRGD_CLR, region->color);
+ OUTREG(DP_WRITE_MSK, 0xffffffff);
+ OUTREG(DP_CNTL, (DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM));
+
+ radeon_fifo_wait(2);
OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
- radeon_fifo_wait(rinfo, 2);
+
+ radeon_fifo_wait(2);
OUTREG(DST_Y_X, (region->dy << 16) | region->dx);
OUTREG(DST_WIDTH_HEIGHT, (region->width << 16) | region->height);
}
@@ -70,14 +70,15 @@ void radeonfb_fillrect(struct fb_info *info, const struct fb_fillrect *region)
struct fb_fillrect modded;
int vxres, vyres;
- WARN_ON(rinfo->gfx_mode);
- if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
+ if (info->state != FBINFO_STATE_RUNNING)
return;
if (info->flags & FBINFO_HWACCEL_DISABLED) {
cfb_fillrect(info, region);
return;
}
+ radeon_fixup_offset(rinfo);
+
vxres = info->var.xres_virtual;
vyres = info->var.yres_virtual;
@@ -90,10 +91,6 @@ void radeonfb_fillrect(struct fb_info *info, const struct fb_fillrect *region)
if(modded.dx + modded.width > vxres) modded.width = vxres - modded.dx;
if(modded.dy + modded.height > vyres) modded.height = vyres - modded.dy;
- if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
- info->fix.visual == FB_VISUAL_DIRECTCOLOR )
- modded.color = ((u32 *) (info->pseudo_palette))[region->color];
-
radeonfb_prim_fillrect(rinfo, &modded);
}
@@ -112,22 +109,22 @@ static void radeonfb_prim_copyarea(struct radeonfb_info *rinfo,
if ( xdir < 0 ) { sx += w-1; dx += w-1; }
if ( ydir < 0 ) { sy += h-1; dy += h-1; }
- radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
- rinfo->dp_gui_mc_base |
- GMC_BRUSH_NONE |
- GMC_SRC_DATATYPE_COLOR |
- ROP3_S |
- DP_SRC_SOURCE_MEMORY);
- radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
- (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0) |
- (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0));
-
-#if FLUSH_CACHE_WORKAROUND
- radeon_fifo_wait(rinfo, 2);
+ radeon_fifo_wait(3);
+ OUTREG(DP_GUI_MASTER_CNTL,
+ rinfo->dp_gui_master_cntl /* i.e. GMC_DST_32BPP */
+ | GMC_BRUSH_NONE
+ | GMC_SRC_DSTCOLOR
+ | ROP3_S
+ | DP_SRC_SOURCE_MEMORY );
+ OUTREG(DP_WRITE_MSK, 0xffffffff);
+ OUTREG(DP_CNTL, (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0)
+ | (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0));
+
+ radeon_fifo_wait(2);
OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
- radeon_fifo_wait(rinfo, 3);
+
+ radeon_fifo_wait(3);
OUTREG(SRC_Y_X, (sy << 16) | sx);
OUTREG(DST_Y_X, (dy << 16) | dx);
OUTREG(DST_HEIGHT_WIDTH, (h << 16) | w);
@@ -146,14 +143,15 @@ void radeonfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
modded.width = area->width;
modded.height = area->height;
- WARN_ON(rinfo->gfx_mode);
- if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
+ if (info->state != FBINFO_STATE_RUNNING)
return;
if (info->flags & FBINFO_HWACCEL_DISABLED) {
cfb_copyarea(info, area);
return;
}
+ radeon_fixup_offset(rinfo);
+
vxres = info->var.xres_virtual;
vyres = info->var.yres_virtual;
@@ -170,115 +168,13 @@ void radeonfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
radeonfb_prim_copyarea(rinfo, &modded);
}
-static void radeonfb_prim_imageblit(struct radeonfb_info *rinfo,
- const struct fb_image *image,
- u32 fg, u32 bg)
-{
- unsigned int dwords;
- u32 *bits;
-
- radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
- rinfo->dp_gui_mc_base |
- GMC_BRUSH_NONE | GMC_DST_CLIP_LEAVE |
- GMC_SRC_DATATYPE_MONO_FG_BG |
- ROP3_S |
- GMC_BYTE_ORDER_MSB_TO_LSB |
- DP_SRC_SOURCE_HOST_DATA);
- radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
- DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
- radeonfb_set_creg(rinfo, DP_SRC_FRGD_CLR, &rinfo->dp_src_fg_cache, fg);
- radeonfb_set_creg(rinfo, DP_SRC_BKGD_CLR, &rinfo->dp_src_bg_cache, bg);
-
- /* Ensure the dst cache is flushed and the engine idle before
- * issuing the operation.
- *
- * This works around engine lockups on some cards
- */
-#if FLUSH_CACHE_WORKAROUND
- radeon_fifo_wait(rinfo, 2);
- OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
- OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
-
- /* X here pads width to a multiple of 32 and uses the clipper to
- * adjust the result. Is that really necessary ? Things seem to
- * work ok for me without that and the doco doesn't seem to imply]
- * there is such a restriction.
- */
- radeon_fifo_wait(rinfo, 4);
- OUTREG(SC_TOP_LEFT, (image->dy << 16) | image->dx);
- OUTREG(SC_BOTTOM_RIGHT, ((image->dy + image->height) << 16) |
- (image->dx + image->width));
- OUTREG(DST_Y_X, (image->dy << 16) | image->dx);
-
- OUTREG(DST_HEIGHT_WIDTH, (image->height << 16) | ((image->width + 31) & ~31));
-
- dwords = (image->width + 31) >> 5;
- dwords *= image->height;
- bits = (u32*)(image->data);
-
- while(dwords >= 8) {
- radeon_fifo_wait(rinfo, 8);
-#if BITS_PER_LONG == 64
- __raw_writeq(*((u64 *)(bits)), rinfo->mmio_base + HOST_DATA0);
- __raw_writeq(*((u64 *)(bits+2)), rinfo->mmio_base + HOST_DATA2);
- __raw_writeq(*((u64 *)(bits+4)), rinfo->mmio_base + HOST_DATA4);
- __raw_writeq(*((u64 *)(bits+6)), rinfo->mmio_base + HOST_DATA6);
- bits += 8;
-#else
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA1);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA2);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA3);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA4);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA5);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA6);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA7);
-#endif
- dwords -= 8;
- }
- while(dwords--) {
- radeon_fifo_wait(rinfo, 1);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0);
- }
-}
-
void radeonfb_imageblit(struct fb_info *info, const struct fb_image *image)
{
struct radeonfb_info *rinfo = info->par;
- u32 fg, bg;
-
- WARN_ON(rinfo->gfx_mode);
- if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
- return;
- if (!image->width || !image->height)
+ if (info->state != FBINFO_STATE_RUNNING)
return;
-
- /* We only do 1 bpp color expansion for now */
- if (info->flags & FBINFO_HWACCEL_DISABLED || image->depth != 1)
- goto fallback;
-
- /* Fallback if running out of the screen. We may do clipping
- * in the future */
- if ((image->dx + image->width) > info->var.xres_virtual ||
- (image->dy + image->height) > info->var.yres_virtual)
- goto fallback;
-
- if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
- info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
- fg = ((u32*)(info->pseudo_palette))[image->fg_color];
- bg = ((u32*)(info->pseudo_palette))[image->bg_color];
- } else {
- fg = image->fg_color;
- bg = image->bg_color;
- }
-
- radeonfb_prim_imageblit(rinfo, image, fg, bg);
- return;
-
- fallback:
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
cfb_imageblit(info, image);
}
@@ -289,8 +185,7 @@ int radeonfb_sync(struct fb_info *info)
if (info->state != FBINFO_STATE_RUNNING)
return 0;
-
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
return 0;
}
@@ -366,10 +261,9 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo)
/* disable 3D engine */
OUTREG(RB3D_CNTL, 0);
- rinfo->fifo_free = 0;
radeonfb_engine_reset(rinfo);
- radeon_fifo_wait(rinfo, 1);
+ radeon_fifo_wait (1);
if (IS_R300_VARIANT(rinfo)) {
OUTREG(RB2D_DSTCACHE_MODE, INREG(RB2D_DSTCACHE_MODE) |
RB2D_DC_AUTOFLUSH_ENABLE |
@@ -383,7 +277,7 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo)
OUTREG(RB2D_DSTCACHE_MODE, 0);
}
- radeon_fifo_wait(rinfo, 3);
+ radeon_fifo_wait (3);
/* We re-read MC_FB_LOCATION from card as it can have been
* modified by XFree drivers (ouch !)
*/
@@ -394,57 +288,41 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo)
OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
- radeon_fifo_wait(rinfo, 1);
-#ifdef __BIG_ENDIAN
+ radeon_fifo_wait (1);
+#if defined(__BIG_ENDIAN)
OUTREGP(DP_DATATYPE, HOST_BIG_ENDIAN_EN, ~HOST_BIG_ENDIAN_EN);
#else
OUTREGP(DP_DATATYPE, 0, ~HOST_BIG_ENDIAN_EN);
#endif
- radeon_fifo_wait(rinfo, 2);
+ radeon_fifo_wait (2);
OUTREG(DEFAULT_SC_TOP_LEFT, 0);
OUTREG(DEFAULT_SC_BOTTOM_RIGHT, (DEFAULT_SC_RIGHT_MAX |
DEFAULT_SC_BOTTOM_MAX));
- /* set default DP_GUI_MASTER_CNTL */
temp = radeon_get_dstbpp(rinfo->depth);
- rinfo->dp_gui_mc_base = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS);
+ rinfo->dp_gui_master_cntl = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS);
- rinfo->dp_gui_mc_cache = rinfo->dp_gui_mc_base |
- GMC_BRUSH_SOLID_COLOR |
- GMC_SRC_DATATYPE_COLOR;
- radeon_fifo_wait(rinfo, 1);
- OUTREG(DP_GUI_MASTER_CNTL, rinfo->dp_gui_mc_cache);
+ radeon_fifo_wait (1);
+ OUTREG(DP_GUI_MASTER_CNTL, (rinfo->dp_gui_master_cntl |
+ GMC_BRUSH_SOLID_COLOR |
+ GMC_SRC_DATATYPE_COLOR));
+ radeon_fifo_wait (7);
/* clear line drawing regs */
- radeon_fifo_wait(rinfo, 2);
OUTREG(DST_LINE_START, 0);
OUTREG(DST_LINE_END, 0);
- /* set brush and source color regs */
- rinfo->dp_brush_fg_cache = 0xffffffff;
- rinfo->dp_brush_bg_cache = 0x00000000;
- rinfo->dp_src_fg_cache = 0xffffffff;
- rinfo->dp_src_bg_cache = 0x00000000;
- radeon_fifo_wait(rinfo, 4);
- OUTREG(DP_BRUSH_FRGD_CLR, rinfo->dp_brush_fg_cache);
- OUTREG(DP_BRUSH_BKGD_CLR, rinfo->dp_brush_bg_cache);
- OUTREG(DP_SRC_FRGD_CLR, rinfo->dp_src_fg_cache);
- OUTREG(DP_SRC_BKGD_CLR, rinfo->dp_src_bg_cache);
-
- /* Default direction */
- rinfo->dp_cntl_cache = DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM;
- radeon_fifo_wait(rinfo, 1);
- OUTREG(DP_CNTL, rinfo->dp_cntl_cache);
+ /* set brush color regs */
+ OUTREG(DP_BRUSH_FRGD_CLR, 0xffffffff);
+ OUTREG(DP_BRUSH_BKGD_CLR, 0x00000000);
+
+ /* set source color regs */
+ OUTREG(DP_SRC_FRGD_CLR, 0xffffffff);
+ OUTREG(DP_SRC_BKGD_CLR, 0x00000000);
/* default write mask */
- radeon_fifo_wait(rinfo, 1);
OUTREG(DP_WRITE_MSK, 0xffffffff);
- /* Default to no swapping of host data */
- radeon_fifo_wait(rinfo, 1);
- OUTREG(RBBM_GUICNTL, RBBM_GUICNTL_HOST_DATA_SWAP_NONE);
-
- /* Make sure it's settled */
- radeon_engine_idle(rinfo);
+ radeon_engine_idle ();
}
diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c
index f343ba83f0a..1a056adb61c 100644
--- a/drivers/video/aty/radeon_backlight.c
+++ b/drivers/video/aty/radeon_backlight.c
@@ -66,7 +66,7 @@ static int radeon_bl_update_status(struct backlight_device *bd)
level = bd->props.brightness;
del_timer_sync(&rinfo->lvds_timer);
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
lvds_gen_cntl = INREG(LVDS_GEN_CNTL);
if (level > 0) {
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index b3ffe8205d2..d0f1a7fc2c9 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -852,6 +852,7 @@ static int radeonfb_pan_display (struct fb_var_screeninfo *var,
if (rinfo->asleep)
return 0;
+ radeon_fifo_wait(2);
OUTREG(CRTC_OFFSET, ((var->yoffset * var->xres_virtual + var->xoffset)
* var->bits_per_pixel / 8) & ~7);
return 0;
@@ -881,6 +882,7 @@ static int radeonfb_ioctl (struct fb_info *info, unsigned int cmd,
if (rc)
return rc;
+ radeon_fifo_wait(2);
if (value & 0x01) {
tmp = INREG(LVDS_GEN_CNTL);
@@ -938,7 +940,7 @@ int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch)
if (rinfo->lock_blank)
return 0;
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
val = INREG(CRTC_EXT_CNTL);
val &= ~(CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS |
@@ -1046,7 +1048,7 @@ static int radeonfb_blank (int blank, struct fb_info *info)
if (rinfo->asleep)
return 0;
-
+
return radeon_screen_blank(rinfo, blank, 0);
}
@@ -1072,6 +1074,8 @@ static int radeon_setcolreg (unsigned regno, unsigned red, unsigned green,
pindex = regno;
if (!rinfo->asleep) {
+ radeon_fifo_wait(9);
+
if (rinfo->bpp == 16) {
pindex = regno * 8;
@@ -1240,6 +1244,8 @@ static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_reg
{
int i;
+ radeon_fifo_wait(20);
+
/* Workaround from XFree */
if (rinfo->is_mobility) {
/* A temporal workaround for the occational blanking on certain laptop
@@ -1335,7 +1341,7 @@ static void radeon_lvds_timer_func(unsigned long data)
{
struct radeonfb_info *rinfo = (struct radeonfb_info *)data;
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
OUTREG(LVDS_GEN_CNTL, rinfo->pending_lvds_gen_cntl);
}
@@ -1353,11 +1359,10 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode,
if (nomodeset)
return;
- radeon_engine_idle(rinfo);
-
if (!regs_only)
radeon_screen_blank(rinfo, FB_BLANK_NORMAL, 0);
+ radeon_fifo_wait(31);
for (i=0; i<10; i++)
OUTREG(common_regs[i].reg, common_regs[i].val);
@@ -1385,6 +1390,7 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode,
radeon_write_pll_regs(rinfo, mode);
if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) {
+ radeon_fifo_wait(10);
OUTREG(FP_CRTC_H_TOTAL_DISP, mode->fp_crtc_h_total_disp);
OUTREG(FP_CRTC_V_TOTAL_DISP, mode->fp_crtc_v_total_disp);
OUTREG(FP_H_SYNC_STRT_WID, mode->fp_h_sync_strt_wid);
@@ -1399,6 +1405,7 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode,
if (!regs_only)
radeon_screen_blank(rinfo, FB_BLANK_UNBLANK, 0);
+ radeon_fifo_wait(2);
OUTPLL(VCLK_ECP_CNTL, mode->vclk_ecp_cntl);
return;
@@ -1549,7 +1556,7 @@ static int radeonfb_set_par(struct fb_info *info)
/* We always want engine to be idle on a mode switch, even
* if we won't actually change the mode
*/
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
hSyncStart = mode->xres + mode->right_margin;
hSyncEnd = hSyncStart + mode->hsync_len;
@@ -1844,6 +1851,7 @@ static int radeonfb_set_par(struct fb_info *info)
return 0;
}
+
static struct fb_ops radeonfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = radeonfb_check_var,
@@ -1867,7 +1875,6 @@ static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo)
info->par = rinfo;
info->pseudo_palette = rinfo->pseudo_palette;
info->flags = FBINFO_DEFAULT
- | FBINFO_HWACCEL_IMAGEBLIT
| FBINFO_HWACCEL_COPYAREA
| FBINFO_HWACCEL_FILLRECT
| FBINFO_HWACCEL_XPAN
@@ -1875,7 +1882,6 @@ static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo)
info->fbops = &radeonfb_ops;
info->screen_base = rinfo->fb_base;
info->screen_size = rinfo->mapped_vram;
-
/* Fill fix common fields */
strlcpy(info->fix.id, rinfo->name, sizeof(info->fix.id));
info->fix.smem_start = rinfo->fb_base_phys;
@@ -1890,25 +1896,8 @@ static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo)
info->fix.mmio_len = RADEON_REGSIZE;
info->fix.accel = FB_ACCEL_ATI_RADEON;
- /* Allocate colormap */
fb_alloc_cmap(&info->cmap, 256, 0);
- /* Setup pixmap used for acceleration */
-#define PIXMAP_SIZE (2048 * 4)
-
- info->pixmap.addr = kmalloc(PIXMAP_SIZE, GFP_KERNEL);
- if (!info->pixmap.addr) {
- printk(KERN_ERR "radeonfb: Failed to allocate pixmap !\n");
- noaccel = 1;
- goto bail;
- }
- info->pixmap.size = PIXMAP_SIZE;
- info->pixmap.flags = FB_PIXMAP_SYSTEM;
- info->pixmap.scan_align = 4;
- info->pixmap.buf_align = 4;
- info->pixmap.access_align = 32;
-
-bail:
if (noaccel)
info->flags |= FBINFO_HWACCEL_DISABLED;
@@ -2017,6 +2006,7 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo)
u32 tom = INREG(NB_TOM);
tmp = ((((tom >> 16) - (tom & 0xffff) + 1) << 6) * 1024);
+ radeon_fifo_wait(6);
OUTREG(MC_FB_LOCATION, tom);
OUTREG(DISPLAY_BASE_ADDR, (tom & 0xffff) << 16);
OUTREG(CRTC2_DISPLAY_BASE_ADDR, (tom & 0xffff) << 16);
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 3df5015f1d1..675abdafc2d 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2653,9 +2653,9 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
if (!(info->flags & FBINFO_HWACCEL_DISABLED)) {
/* Make sure engine is reset */
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
radeonfb_engine_reset(rinfo);
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
}
/* Blank display and LCD */
@@ -2767,7 +2767,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
rinfo->asleep = 0;
} else
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
/* Restore display & engine */
radeon_write_mode (rinfo, &rinfo->state, 1);
diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h
index ea0b5b47aca..3ea1b00fdd2 100644
--- a/drivers/video/aty/radeonfb.h
+++ b/drivers/video/aty/radeonfb.h
@@ -336,15 +336,7 @@ struct radeonfb_info {
int mon2_type;
u8 *mon2_EDID;
- /* accel bits */
- u32 dp_gui_mc_base;
- u32 dp_gui_mc_cache;
- u32 dp_cntl_cache;
- u32 dp_brush_fg_cache;
- u32 dp_brush_bg_cache;
- u32 dp_src_fg_cache;
- u32 dp_src_bg_cache;
- u32 fifo_free;
+ u32 dp_gui_master_cntl;
struct pll_info pll;
@@ -356,7 +348,6 @@ struct radeonfb_info {
int lock_blank;
int dynclk;
int no_schedule;
- int gfx_mode;
enum radeon_pm_mode pm_mode;
reinit_function_ptr reinit_func;
@@ -401,14 +392,8 @@ static inline void _radeon_msleep(struct radeonfb_info *rinfo, unsigned long ms)
#define OUTREG8(addr,val) writeb(val, (rinfo->mmio_base)+addr)
#define INREG16(addr) readw((rinfo->mmio_base)+addr)
#define OUTREG16(addr,val) writew(val, (rinfo->mmio_base)+addr)
-
-#ifdef CONFIG_PPC
-#define INREG(addr) ({ eieio(); ld_le32(rinfo->mmio_base+(addr)); })
-#define OUTREG(addr,val) do { eieio(); st_le32(rinfo->mmio_base+(addr),(val)); } while(0)
-#else
#define INREG(addr) readl((rinfo->mmio_base)+addr)
#define OUTREG(addr,val) writel(val, (rinfo->mmio_base)+addr)
-#endif
static inline void _OUTREGP(struct radeonfb_info *rinfo, u32 addr,
u32 val, u32 mask)
@@ -550,7 +535,17 @@ static inline u32 radeon_get_dstbpp(u16 depth)
* 2D Engine helper routines
*/
-extern void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries);
+static inline void _radeon_fifo_wait(struct radeonfb_info *rinfo, int entries)
+{
+ int i;
+
+ for (i=0; i<2000000; i++) {
+ if ((INREG(RBBM_STATUS) & 0x7f) >= entries)
+ return;
+ udelay(1);
+ }
+ printk(KERN_ERR "radeonfb: FIFO Timeout !\n");
+}
static inline void radeon_engine_flush (struct radeonfb_info *rinfo)
{
@@ -563,7 +558,7 @@ static inline void radeon_engine_flush (struct radeonfb_info *rinfo)
/* Ensure FIFO is empty, ie, make sure the flush commands
* has reached the cache
*/
- radeon_fifo_update_and_wait(rinfo, 64);
+ _radeon_fifo_wait (rinfo, 64);
/* Wait for the flush to complete */
for (i=0; i < 2000000; i++) {
@@ -575,12 +570,12 @@ static inline void radeon_engine_flush (struct radeonfb_info *rinfo)
}
-static inline void radeon_engine_idle(struct radeonfb_info *rinfo)
+static inline void _radeon_engine_idle(struct radeonfb_info *rinfo)
{
int i;
/* ensure FIFO is empty before waiting for idle */
- radeon_fifo_update_and_wait (rinfo, 64);
+ _radeon_fifo_wait (rinfo, 64);
for (i=0; i<2000000; i++) {
if (((INREG(RBBM_STATUS) & GUI_ACTIVE)) == 0) {
@@ -593,6 +588,8 @@ static inline void radeon_engine_idle(struct radeonfb_info *rinfo)
}
+#define radeon_engine_idle() _radeon_engine_idle(rinfo)
+#define radeon_fifo_wait(entries) _radeon_fifo_wait(rinfo,entries)
#define radeon_msleep(ms) _radeon_msleep(rinfo,ms)
@@ -622,7 +619,6 @@ extern void radeonfb_imageblit(struct fb_info *p, const struct fb_image *image);
extern int radeonfb_sync(struct fb_info *info);
extern void radeonfb_engine_init (struct radeonfb_info *rinfo);
extern void radeonfb_engine_reset(struct radeonfb_info *rinfo);
-extern void radeon_fixup_mem_offset(struct radeonfb_info *rinfo);
/* Other functions */
extern int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch);
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 67ff370d80a..0b2adefe9e3 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -3531,12 +3531,18 @@ static void fbcon_exit(void)
softback_buf = 0UL;
for (i = 0; i < FB_MAX; i++) {
+ int pending;
+
mapped = 0;
info = registered_fb[i];
if (info == NULL)
continue;
+ pending = cancel_work_sync(&info->queue);
+ DPRINTK("fbcon: %s pending work\n", (pending ? "canceled" :
+ "no"));
+
for (j = first_fb_vc; j <= last_fb_vc; j++) {
if (con2fb_map[j] == i)
mapped = 1;
diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c
index 38718d95fbb..fb64234a382 100644
--- a/drivers/video/mb862xx/mb862xxfb.c
+++ b/drivers/video/mb862xx/mb862xxfb.c
@@ -927,9 +927,9 @@ static int __devinit mb862xx_pci_probe(struct pci_dev *pdev,
}
dev_dbg(dev, "fb phys 0x%llx 0x%lx\n",
- (u64)par->fb_base_phys, (ulong)par->mapped_vram);
+ (unsigned long long)par->fb_base_phys, (ulong)par->mapped_vram);
dev_dbg(dev, "mmio phys 0x%llx 0x%lx\n",
- (u64)par->mmio_base_phys, (ulong)par->mmio_len);
+ (unsigned long long)par->mmio_base_phys, (ulong)par->mmio_len);
if (mb862xx_pci_gdc_init(par))
goto io_unmap;
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 5a5e407dc45..1a49519dafa 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -392,7 +392,7 @@ static void set_fb_fix(struct fb_info *fbi)
int bpp;
rg = &plane->fbdev->mem_desc.region[plane->idx];
- fbi->screen_base = (char __iomem *)rg->vaddr;
+ fbi->screen_base = rg->vaddr;
fix->smem_start = rg->paddr;
fix->smem_len = rg->size;
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 26173a270e9..5b395a4ddfd 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -392,7 +392,7 @@ static int iTCO_wdt_stop(void)
/* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
val32 = inl(SMI_EN);
- val32 &= 0x00002000;
+ val32 |= 0x00002000;
outl(val32, SMI_EN);
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
diff --git a/fs/block_dev.c b/fs/block_dev.c
index db831efbdbb..99e0ae1a4c7 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1135,12 +1135,15 @@ static int blkdev_open(struct inode * inode, struct file * filp)
if (res)
return res;
- if (!(filp->f_mode & FMODE_EXCL))
- return 0;
+ if (filp->f_mode & FMODE_EXCL) {
+ res = bd_claim(bdev, filp);
+ if (res)
+ goto out_blkdev_put;
+ }
- if (!(res = bd_claim(bdev, filp)))
- return 0;
+ return 0;
+ out_blkdev_put:
blkdev_put(bdev, filp->f_mode);
return res;
}
@@ -1203,8 +1206,16 @@ static long block_ioctl(struct file *file, unsigned cmd, unsigned long arg)
{
struct block_device *bdev = I_BDEV(file->f_mapping->host);
fmode_t mode = file->f_mode;
+
+ /*
+ * O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
+ * to updated it before every ioctl.
+ */
if (file->f_flags & O_NDELAY)
- mode |= FMODE_NDELAY_NOW;
+ mode |= FMODE_NDELAY;
+ else
+ mode &= ~FMODE_NDELAY;
+
return blkdev_ioctl(bdev, mode, cmd, arg);
}
diff --git a/fs/exec.c b/fs/exec.c
index 4e834f16d9d..ec5df9a3831 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1159,6 +1159,7 @@ EXPORT_SYMBOL(remove_arg_zero);
*/
int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs)
{
+ unsigned int depth = bprm->recursion_depth;
int try,retval;
struct linux_binfmt *fmt;
#ifdef __alpha__
@@ -1219,8 +1220,15 @@ int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs)
continue;
read_unlock(&binfmt_lock);
retval = fn(bprm, regs);
+ /*
+ * Restore the depth counter to its starting value
+ * in this call, so we don't have to rely on every
+ * load_binary function to restore it on return.
+ */
+ bprm->recursion_depth = depth;
if (retval >= 0) {
- tracehook_report_exec(fmt, bprm, regs);
+ if (depth == 0)
+ tracehook_report_exec(fmt, bprm, regs);
put_binfmt(fmt);
allow_write_access(bprm->file);
if (bprm->file)
diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c
index 80246bad1b7..890e0182881 100644
--- a/fs/exportfs/expfs.c
+++ b/fs/exportfs/expfs.c
@@ -367,6 +367,8 @@ struct dentry *exportfs_decode_fh(struct vfsmount *mnt, struct fid *fid,
* Try to get any dentry for the given file handle from the filesystem.
*/
result = nop->fh_to_dentry(mnt->mnt_sb, fid, fh_len, fileid_type);
+ if (!result)
+ result = ERR_PTR(-ESTALE);
if (IS_ERR(result))
return result;
@@ -420,6 +422,8 @@ struct dentry *exportfs_decode_fh(struct vfsmount *mnt, struct fid *fid,
target_dir = nop->fh_to_parent(mnt->mnt_sb, fid,
fh_len, fileid_type);
+ if (!target_dir)
+ goto err_result;
err = PTR_ERR(target_dir);
if (IS_ERR(target_dir))
goto err_result;
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index d2003cdc36a..db35cfdb3c8 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -609,8 +609,8 @@ int ext4_has_free_blocks(struct ext4_sb_info *sbi, s64 nblocks)
if (free_blocks - (nblocks + root_blocks + dirty_blocks) <
EXT4_FREEBLOCKS_WATERMARK) {
- free_blocks = percpu_counter_sum(fbc);
- dirty_blocks = percpu_counter_sum(dbc);
+ free_blocks = percpu_counter_sum_positive(fbc);
+ dirty_blocks = percpu_counter_sum_positive(dbc);
if (dirty_blocks < 0) {
printk(KERN_CRIT "Dirty block accounting "
"went wrong %lld\n",
diff --git a/fs/fcntl.c b/fs/fcntl.c
index ac4f7db9f13..549daf8005f 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -19,6 +19,7 @@
#include <linux/signal.h>
#include <linux/rcupdate.h>
#include <linux/pid_namespace.h>
+#include <linux/smp_lock.h>
#include <asm/poll.h>
#include <asm/siginfo.h>
@@ -175,6 +176,11 @@ static int setfl(int fd, struct file * filp, unsigned long arg)
if (error)
return error;
+ /*
+ * We still need a lock here for now to keep multiple FASYNC calls
+ * from racing with each other.
+ */
+ lock_kernel();
if ((arg ^ filp->f_flags) & FASYNC) {
if (filp->f_op && filp->f_op->fasync) {
error = filp->f_op->fasync(fd, filp, (arg & FASYNC) != 0);
@@ -185,6 +191,7 @@ static int setfl(int fd, struct file * filp, unsigned long arg)
filp->f_flags = (arg & SETFL_MASK) | (filp->f_flags & ~SETFL_MASK);
out:
+ unlock_kernel();
return error;
}
diff --git a/fs/inotify.c b/fs/inotify.c
index 7bbed1b8982..dae3f28f30d 100644
--- a/fs/inotify.c
+++ b/fs/inotify.c
@@ -428,11 +428,13 @@ void inotify_unmount_inodes(struct list_head *list)
watches = &inode->inotify_watches;
list_for_each_entry_safe(watch, next_w, watches, i_list) {
struct inotify_handle *ih= watch->ih;
+ get_inotify_watch(watch);
mutex_lock(&ih->mutex);
ih->in_ops->handle_event(watch, watch->wd, IN_UNMOUNT, 0,
NULL, NULL);
inotify_remove_watch_locked(ih, watch);
mutex_unlock(&ih->mutex);
+ put_inotify_watch(watch);
}
mutex_unlock(&inode->inotify_mutex);
iput(inode);
diff --git a/fs/ioctl.c b/fs/ioctl.c
index d152856c371..43e8b2c0664 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -400,11 +400,9 @@ static int ioctl_fioasync(unsigned int fd, struct file *filp,
/* Did FASYNC state change ? */
if ((flag ^ filp->f_flags) & FASYNC) {
- if (filp->f_op && filp->f_op->fasync) {
- lock_kernel();
+ if (filp->f_op && filp->f_op->fasync)
error = filp->f_op->fasync(fd, filp, on);
- unlock_kernel();
- } else
+ else
error = -ENOTTY;
}
if (error)
@@ -440,11 +438,17 @@ int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
break;
case FIONBIO:
+ /* BKL needed to avoid races tweaking f_flags */
+ lock_kernel();
error = ioctl_fionbio(filp, argp);
+ unlock_kernel();
break;
case FIOASYNC:
+ /* BKL needed to avoid races tweaking f_flags */
+ lock_kernel();
error = ioctl_fioasync(fd, filp, argp);
+ unlock_kernel();
break;
case FIOQSIZE:
diff --git a/fs/lockd/host.c b/fs/lockd/host.c
index c48c2638077..e05d0441603 100644
--- a/fs/lockd/host.c
+++ b/fs/lockd/host.c
@@ -167,7 +167,8 @@ static struct nlm_host *nlm_lookup_host(struct nlm_lookup_host_info *ni)
continue;
if (host->h_server != ni->server)
continue;
- if (!nlm_cmp_addr(nlm_srcaddr(host), ni->src_sap))
+ if (ni->server &&
+ !nlm_cmp_addr(nlm_srcaddr(host), ni->src_sap))
continue;
/* Move to head of hash chain. */
diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c
index c631a83931c..56b076736b5 100644
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -181,6 +181,7 @@ lockd(void *vrqstp)
}
flush_signals(current);
cancel_delayed_work_sync(&grace_period_end);
+ locks_end_grace(&lockd_manager);
if (nlmsvc_ops)
nlmsvc_invalidate_all();
nlm_shutdown_hosts();
diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c
index bb93946ace2..b79ec930d9f 100644
--- a/fs/nfsd/nfs4recover.c
+++ b/fs/nfsd/nfs4recover.c
@@ -225,12 +225,12 @@ nfsd4_list_rec_dir(struct dentry *dir, recdir_func *f)
return 0;
nfs4_save_user(&uid, &gid);
+ INIT_LIST_HEAD(dentries);
filp = dentry_open(dget(dir), mntget(rec_dir.mnt), O_RDONLY);
status = PTR_ERR(filp);
if (IS_ERR(filp))
goto out;
- INIT_LIST_HEAD(dentries);
status = vfs_readdir(filp, nfsd4_build_dentrylist, &dla);
fput(filp);
while (!list_empty(dentries)) {
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 16efb8f8e06..bf4cd46a5a1 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -3261,6 +3261,7 @@ nfs4_state_shutdown(void)
{
cancel_rearming_delayed_workqueue(laundry_wq, &laundromat_work);
destroy_workqueue(laundry_wq);
+ locks_end_grace(&nfsd4_manager);
nfs4_lock_state();
nfs4_release_reclaim();
__nfs4_state_shutdown();
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 486cf3fe713..d4677603c88 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -371,7 +371,7 @@ static int lstats_show_proc(struct seq_file *m, void *v)
task->latency_record[i].time,
task->latency_record[i].max);
for (q = 0; q < LT_BACKTRACEDEPTH; q++) {
- char sym[KSYM_NAME_LEN];
+ char sym[KSYM_SYMBOL_LEN];
char *c;
if (!task->latency_record[i].backtrace[q])
break;
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index b770c095e45..3a8bdd7f575 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -557,9 +557,9 @@ static u64 swap_pte_to_pagemap_entry(pte_t pte)
return swp_type(e) | (swp_offset(e) << MAX_SWAPFILES_SHIFT);
}
-static unsigned long pte_to_pagemap_entry(pte_t pte)
+static u64 pte_to_pagemap_entry(pte_t pte)
{
- unsigned long pme = 0;
+ u64 pme = 0;
if (is_swap_pte(pte))
pme = PM_PFRAME(swap_pte_to_pagemap_entry(pte))
| PM_PSHIFT(PAGE_SHIFT) | PM_SWAP;
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index d700dacdb10..c903130be7f 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -212,7 +212,7 @@ xfs_rename(
if (unlikely((target_dp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) &&
(target_dp->i_d.di_projid != src_ip->i_d.di_projid))) {
error = XFS_ERROR(EXDEV);
- xfs_rename_unlock4(inodes, XFS_ILOCK_SHARED);
+ xfs_rename_unlock4(inodes, XFS_ILOCK_EXCL);
xfs_trans_cancel(tp, cancel_flags);
goto std_return;
}
diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h
index 4ec0a296bde..7abdaa91ccd 100644
--- a/include/asm-generic/atomic.h
+++ b/include/asm-generic/atomic.h
@@ -251,7 +251,7 @@ static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
#define atomic_long_cmpxchg(l, old, new) \
(atomic_cmpxchg((atomic_t *)(l), (old), (new)))
#define atomic_long_xchg(v, new) \
- (atomic_xchg((atomic_t *)(l), (new)))
+ (atomic_xchg((atomic_t *)(v), (new)))
#endif /* BITS_PER_LONG == 64 */
diff --git a/include/asm-generic/audit_write.h b/include/asm-generic/audit_write.h
index f10d367fb2a..c5f1c2c920e 100644
--- a/include/asm-generic/audit_write.h
+++ b/include/asm-generic/audit_write.h
@@ -1,6 +1,8 @@
#include <asm-generic/audit_dir_write.h>
__NR_acct,
+#ifdef __NR_swapon
__NR_swapon,
+#endif
__NR_quotactl,
__NR_truncate,
#ifdef __NR_truncate64
diff --git a/include/asm-mn10300/uaccess.h b/include/asm-mn10300/uaccess.h
index 46b9b647f3c..8a3a4dd5576 100644
--- a/include/asm-mn10300/uaccess.h
+++ b/include/asm-mn10300/uaccess.h
@@ -266,7 +266,7 @@ extern int __get_user_unknown(void);
" .section .fixup,\"ax\" \n" \
"4: \n" \
" mov %5,%0 \n" \
- " jmp 2b \n" \
+ " jmp 3b \n" \
" .previous \n" \
" .section __ex_table,\"a\"\n" \
" .balign 4 \n" \
diff --git a/include/linux/audit.h b/include/linux/audit.h
index 6272a395d43..8f0672d13eb 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -391,6 +391,7 @@ extern int audit_classify_arch(int arch);
#ifdef CONFIG_AUDITSYSCALL
/* These are defined in auditsc.c */
/* Public API */
+extern void audit_finish_fork(struct task_struct *child);
extern int audit_alloc(struct task_struct *task);
extern void audit_free(struct task_struct *task);
extern void audit_syscall_entry(int arch,
@@ -434,7 +435,7 @@ static inline void audit_ptrace(struct task_struct *t)
/* Private API (for audit.c only) */
extern unsigned int audit_serial(void);
-extern void auditsc_get_stamp(struct audit_context *ctx,
+extern int auditsc_get_stamp(struct audit_context *ctx,
struct timespec *t, unsigned int *serial);
extern int audit_set_loginuid(struct task_struct *task, uid_t loginuid);
#define audit_get_loginuid(t) ((t)->loginuid)
@@ -504,6 +505,7 @@ static inline int audit_mq_getsetattr(mqd_t mqdes, struct mq_attr *mqstat)
extern int audit_n_rules;
extern int audit_signals;
#else
+#define audit_finish_fork(t)
#define audit_alloc(t) ({ 0; })
#define audit_free(t) do { ; } while (0)
#define audit_syscall_entry(ta,a,b,c,d,e) do { ; } while (0)
@@ -516,7 +518,7 @@ extern int audit_signals;
#define audit_inode(n,d) do { ; } while (0)
#define audit_inode_child(d,i,p) do { ; } while (0)
#define audit_core_dumps(i) do { ; } while (0)
-#define auditsc_get_stamp(c,t,s) do { BUG(); } while (0)
+#define auditsc_get_stamp(c,t,s) (0)
#define audit_get_loginuid(t) (-1)
#define audit_get_sessionid(t) (-1)
#define audit_log_task_context(b) do { ; } while (0)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index a135256b272..031a315c050 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -662,6 +662,7 @@ extern unsigned long blk_max_low_pfn, blk_max_pfn;
* default timeout for SG_IO if none specified
*/
#define BLK_DEFAULT_SG_TIMEOUT (60 * HZ)
+#define BLK_MIN_SG_TIMEOUT (7 * HZ)
#ifdef CONFIG_BOUNCE
extern int init_emergency_isa_pool(void);
@@ -786,6 +787,8 @@ static inline void blk_run_address_space(struct address_space *mapping)
blk_run_backing_dev(mapping->backing_dev_info, NULL);
}
+extern void blkdev_dequeue_request(struct request *req);
+
/*
* blk_end_request() and friends.
* __blk_end_request() and end_request() must be called with
@@ -820,11 +823,6 @@ extern void blk_update_request(struct request *rq, int error,
extern unsigned int blk_rq_bytes(struct request *rq);
extern unsigned int blk_rq_cur_bytes(struct request *rq);
-static inline void blkdev_dequeue_request(struct request *req)
-{
- elv_dequeue_request(req->q, req);
-}
-
/*
* Access functions for manipulating queue properties
*/
@@ -921,6 +919,8 @@ extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
#define MAX_SEGMENT_SIZE 65536
+#define BLK_SEG_BOUNDARY_MASK 0xFFFFFFFFUL
+
#define blkdev_entry_to_request(entry) list_entry((entry), struct request, queuelist)
static inline int queue_hardsect_size(struct request_queue *q)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0dcdd9458f4..4a853ef6fd3 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -63,23 +63,24 @@ extern int dir_notify_enable;
#define MAY_ACCESS 16
#define MAY_OPEN 32
-#define FMODE_READ ((__force fmode_t)1)
-#define FMODE_WRITE ((__force fmode_t)2)
-
-/* Internal kernel extensions */
-#define FMODE_LSEEK ((__force fmode_t)4)
-#define FMODE_PREAD ((__force fmode_t)8)
-#define FMODE_PWRITE FMODE_PREAD /* These go hand in hand */
-
-/* File is being opened for execution. Primary users of this flag are
- distributed filesystems that can use it to achieve correct ETXTBUSY
- behavior for cross-node execution/opening_for_writing of files */
-#define FMODE_EXEC ((__force fmode_t)16)
-
-#define FMODE_NDELAY ((__force fmode_t)32)
-#define FMODE_EXCL ((__force fmode_t)64)
+/* file is open for reading */
+#define FMODE_READ ((__force fmode_t)1)
+/* file is open for writing */
+#define FMODE_WRITE ((__force fmode_t)2)
+/* file is seekable */
+#define FMODE_LSEEK ((__force fmode_t)4)
+/* file can be accessed using pread/pwrite */
+#define FMODE_PREAD ((__force fmode_t)8)
+#define FMODE_PWRITE FMODE_PREAD /* These go hand in hand */
+/* File is opened for execution with sys_execve / sys_uselib */
+#define FMODE_EXEC ((__force fmode_t)16)
+/* File is opened with O_NDELAY (only set for block devices) */
+#define FMODE_NDELAY ((__force fmode_t)32)
+/* File is opened with O_EXCL (only set for block devices) */
+#define FMODE_EXCL ((__force fmode_t)64)
+/* File is opened using open(.., 3, ..) and is writeable only for ioctls
+ (specialy hack for floppy.c) */
#define FMODE_WRITE_IOCTL ((__force fmode_t)128)
-#define FMODE_NDELAY_NOW ((__force fmode_t)256)
#define RW_MASK 1
#define RWA_MASK 2
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 703eb53cfa2..9c5bc6be2b0 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -6,6 +6,7 @@
#include <linux/ktime.h>
#include <linux/init.h>
#include <linux/types.h>
+#include <linux/module.h>
#include <linux/kallsyms.h>
#ifdef CONFIG_FUNCTION_TRACER
@@ -231,7 +232,7 @@ ftrace_init_module(unsigned long *start, unsigned long *end) { }
struct boot_trace {
pid_t caller;
- char func[KSYM_NAME_LEN];
+ char func[KSYM_SYMBOL_LEN];
int result;
unsigned long long duration; /* usecs */
ktime_t calltime;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 47e73152831..b60c26b7d31 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -322,6 +322,7 @@ enum
{
NAPI_STATE_SCHED, /* Poll is scheduled */
NAPI_STATE_DISABLE, /* Disable pending */
+ NAPI_STATE_NPSVC, /* Netpoll - don't dequeue from poll_list */
};
extern void __napi_schedule(struct napi_struct *n);
@@ -1622,6 +1623,12 @@ static inline void netif_rx_complete(struct net_device *dev,
{
unsigned long flags;
+ /*
+ * don't let napi dequeue from the cpu poll list
+ * just in case its running on a different cpu
+ */
+ if (unlikely(test_bit(NAPI_STATE_NPSVC, &napi->state)))
+ return;
local_irq_save(flags);
__netif_rx_complete(dev, napi);
local_irq_restore(flags);
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 3f9a60043a9..6e7ba16ff45 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -146,6 +146,8 @@ static inline void smp_send_reschedule(int cpu) { }
})
#define smp_call_function_mask(mask, func, info, wait) \
(up_smp_call_function(func, info))
+#define smp_call_function_many(mask, func, info, wait) \
+ (up_smp_call_function(func, info))
static inline void init_call_single_data(void)
{
}
diff --git a/include/video/radeon.h b/include/video/radeon.h
index d5dcaf154ba..1cd09cc5b16 100644
--- a/include/video/radeon.h
+++ b/include/video/radeon.h
@@ -525,9 +525,6 @@
#define CRTC_DISPLAY_DIS (1 << 10)
#define CRTC_CRT_ON (1 << 15)
-/* DSTCACHE_MODE bits constants */
-#define RB2D_DC_AUTOFLUSH_ENABLE (1 << 8)
-#define RB2D_DC_DC_DISABLE_IGNORE_PE (1 << 17)
/* DSTCACHE_CTLSTAT bit constants */
#define RB2D_DC_FLUSH_2D (1 << 0)
@@ -869,10 +866,15 @@
#define GMC_DST_16BPP_YVYU422 0x00000c00
#define GMC_DST_32BPP_AYUV444 0x00000e00
#define GMC_DST_16BPP_ARGB4444 0x00000f00
+#define GMC_SRC_MONO 0x00000000
+#define GMC_SRC_MONO_LBKGD 0x00001000
+#define GMC_SRC_DSTCOLOR 0x00003000
#define GMC_BYTE_ORDER_MSB_TO_LSB 0x00000000
#define GMC_BYTE_ORDER_LSB_TO_MSB 0x00004000
#define GMC_DP_CONVERSION_TEMP_9300 0x00008000
#define GMC_DP_CONVERSION_TEMP_6500 0x00000000
+#define GMC_DP_SRC_RECT 0x02000000
+#define GMC_DP_SRC_HOST 0x03000000
#define GMC_DP_SRC_HOST_BYTEALIGN 0x04000000
#define GMC_3D_FCN_EN_CLR 0x00000000
#define GMC_3D_FCN_EN_SET 0x08000000
@@ -883,9 +885,6 @@
#define GMC_WRITE_MASK_LEAVE 0x00000000
#define GMC_WRITE_MASK_SET 0x40000000
#define GMC_CLR_CMP_CNTL_DIS (1 << 28)
-#define GMC_SRC_DATATYPE_MASK (3 << 12)
-#define GMC_SRC_DATATYPE_MONO_FG_BG (0 << 12)
-#define GMC_SRC_DATATYPE_MONO_FG_LA (1 << 12)
#define GMC_SRC_DATATYPE_COLOR (3 << 12)
#define ROP3_S 0x00cc0000
#define ROP3_SRCCOPY 0x00cc0000
@@ -894,7 +893,6 @@
#define DP_SRC_SOURCE_MASK (7 << 24)
#define GMC_BRUSH_NONE (15 << 4)
#define DP_SRC_SOURCE_MEMORY (2 << 24)
-#define DP_SRC_SOURCE_HOST_DATA (3 << 24)
#define GMC_BRUSH_SOLIDCOLOR 0x000000d0
/* DP_MIX bit constants */
@@ -980,12 +978,6 @@
#define DISP_PWR_MAN_TV_ENABLE_RST (1 << 25)
#define DISP_PWR_MAN_AUTO_PWRUP_EN (1 << 26)
-/* RBBM_GUICNTL constants */
-#define RBBM_GUICNTL_HOST_DATA_SWAP_NONE (0 << 0)
-#define RBBM_GUICNTL_HOST_DATA_SWAP_16BIT (1 << 0)
-#define RBBM_GUICNTL_HOST_DATA_SWAP_32BIT (2 << 0)
-#define RBBM_GUICNTL_HOST_DATA_SWAP_HDW (3 << 0)
-
/* masks */
#define CONFIG_MEMSIZE_MASK 0x1f000000
diff --git a/kernel/audit.c b/kernel/audit.c
index 4414e93d875..ce6d8ea3131 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -61,8 +61,11 @@
#include "audit.h"
-/* No auditing will take place until audit_initialized != 0.
+/* No auditing will take place until audit_initialized == AUDIT_INITIALIZED.
* (Initialization happens after skb_init is called.) */
+#define AUDIT_DISABLED -1
+#define AUDIT_UNINITIALIZED 0
+#define AUDIT_INITIALIZED 1
static int audit_initialized;
#define AUDIT_OFF 0
@@ -965,6 +968,9 @@ static int __init audit_init(void)
{
int i;
+ if (audit_initialized == AUDIT_DISABLED)
+ return 0;
+
printk(KERN_INFO "audit: initializing netlink socket (%s)\n",
audit_default ? "enabled" : "disabled");
audit_sock = netlink_kernel_create(&init_net, NETLINK_AUDIT, 0,
@@ -976,7 +982,7 @@ static int __init audit_init(void)
skb_queue_head_init(&audit_skb_queue);
skb_queue_head_init(&audit_skb_hold_queue);
- audit_initialized = 1;
+ audit_initialized = AUDIT_INITIALIZED;
audit_enabled = audit_default;
audit_ever_enabled |= !!audit_default;
@@ -999,13 +1005,21 @@ __initcall(audit_init);
static int __init audit_enable(char *str)
{
audit_default = !!simple_strtol(str, NULL, 0);
- printk(KERN_INFO "audit: %s%s\n",
- audit_default ? "enabled" : "disabled",
- audit_initialized ? "" : " (after initialization)");
- if (audit_initialized) {
+ if (!audit_default)
+ audit_initialized = AUDIT_DISABLED;
+
+ printk(KERN_INFO "audit: %s", audit_default ? "enabled" : "disabled");
+
+ if (audit_initialized == AUDIT_INITIALIZED) {
audit_enabled = audit_default;
audit_ever_enabled |= !!audit_default;
+ } else if (audit_initialized == AUDIT_UNINITIALIZED) {
+ printk(" (after initialization)");
+ } else {
+ printk(" (until reboot)");
}
+ printk("\n");
+
return 1;
}
@@ -1107,9 +1121,7 @@ unsigned int audit_serial(void)
static inline void audit_get_stamp(struct audit_context *ctx,
struct timespec *t, unsigned int *serial)
{
- if (ctx)
- auditsc_get_stamp(ctx, t, serial);
- else {
+ if (!ctx || !auditsc_get_stamp(ctx, t, serial)) {
*t = CURRENT_TIME;
*serial = audit_serial();
}
@@ -1146,7 +1158,7 @@ struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask,
int reserve;
unsigned long timeout_start = jiffies;
- if (!audit_initialized)
+ if (audit_initialized != AUDIT_INITIALIZED)
return NULL;
if (unlikely(audit_filter_type(type)))
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index cf5bc2f5f9c..2a3f0afc4d2 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1459,7 +1459,6 @@ void audit_free(struct task_struct *tsk)
/**
* audit_syscall_entry - fill in an audit record at syscall entry
- * @tsk: task being audited
* @arch: architecture type
* @major: major syscall type (function)
* @a1: additional syscall register 1
@@ -1548,9 +1547,25 @@ void audit_syscall_entry(int arch, int major,
context->ppid = 0;
}
+void audit_finish_fork(struct task_struct *child)
+{
+ struct audit_context *ctx = current->audit_context;
+ struct audit_context *p = child->audit_context;
+ if (!p || !ctx || !ctx->auditable)
+ return;
+ p->arch = ctx->arch;
+ p->major = ctx->major;
+ memcpy(p->argv, ctx->argv, sizeof(ctx->argv));
+ p->ctime = ctx->ctime;
+ p->dummy = ctx->dummy;
+ p->auditable = ctx->auditable;
+ p->in_syscall = ctx->in_syscall;
+ p->filterkey = kstrdup(ctx->filterkey, GFP_KERNEL);
+ p->ppid = current->pid;
+}
+
/**
* audit_syscall_exit - deallocate audit context after a system call
- * @tsk: task being audited
* @valid: success/failure flag
* @return_code: syscall return value
*
@@ -1942,15 +1957,18 @@ EXPORT_SYMBOL_GPL(__audit_inode_child);
*
* Also sets the context as auditable.
*/
-void auditsc_get_stamp(struct audit_context *ctx,
+int auditsc_get_stamp(struct audit_context *ctx,
struct timespec *t, unsigned int *serial)
{
+ if (!ctx->in_syscall)
+ return 0;
if (!ctx->serial)
ctx->serial = audit_serial();
t->tv_sec = ctx->ctime.tv_sec;
t->tv_nsec = ctx->ctime.tv_nsec;
*serial = ctx->serial;
ctx->auditable = 1;
+ return 1;
}
/* global counter which is incremented every time something logs in */
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index fe00b3b983a..8185a0f0959 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -702,7 +702,7 @@ static int rebind_subsystems(struct cgroupfs_root *root,
* any child cgroups exist. This is theoretically supportable
* but involves complex error handling, so it's being left until
* later */
- if (!list_empty(&cgrp->children))
+ if (root->number_of_cgroups > 1)
return -EBUSY;
/* Process each subsystem */
diff --git a/kernel/fork.c b/kernel/fork.c
index 2a372a0e206..495da2e9a8b 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -315,17 +315,20 @@ static int dup_mmap(struct mm_struct *mm, struct mm_struct *oldmm)
file = tmp->vm_file;
if (file) {
struct inode *inode = file->f_path.dentry->d_inode;
+ struct address_space *mapping = file->f_mapping;
+
get_file(file);
if (tmp->vm_flags & VM_DENYWRITE)
atomic_dec(&inode->i_writecount);
-
- /* insert tmp into the share list, just after mpnt */
- spin_lock(&file->f_mapping->i_mmap_lock);
+ spin_lock(&mapping->i_mmap_lock);
+ if (tmp->vm_flags & VM_SHARED)
+ mapping->i_mmap_writable++;
tmp->vm_truncate_count = mpnt->vm_truncate_count;
- flush_dcache_mmap_lock(file->f_mapping);
+ flush_dcache_mmap_lock(mapping);
+ /* insert tmp into the share list, just after mpnt */
vma_prio_tree_add(tmp, mpnt);
- flush_dcache_mmap_unlock(file->f_mapping);
- spin_unlock(&file->f_mapping->i_mmap_lock);
+ flush_dcache_mmap_unlock(mapping);
+ spin_unlock(&mapping->i_mmap_lock);
}
/*
@@ -1398,6 +1401,7 @@ long do_fork(unsigned long clone_flags,
init_completion(&vfork);
}
+ audit_finish_fork(p);
tracehook_report_clone(trace, regs, clone_flags, nr, p);
/*
diff --git a/kernel/latencytop.c b/kernel/latencytop.c
index 5e7b45c5692..449db466bdb 100644
--- a/kernel/latencytop.c
+++ b/kernel/latencytop.c
@@ -191,7 +191,7 @@ static int lstats_show(struct seq_file *m, void *v)
latency_record[i].time,
latency_record[i].max);
for (q = 0; q < LT_BACKTRACEDEPTH; q++) {
- char sym[KSYM_NAME_LEN];
+ char sym[KSYM_SYMBOL_LEN];
char *c;
if (!latency_record[i].backtrace[q])
break;
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 895337b16a2..4e5288a831d 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -311,7 +311,7 @@ static int cpu_clock_sample_group(const clockid_t which_clock,
struct task_cputime cputime;
thread_group_cputime(p, &cputime);
- switch (which_clock) {
+ switch (CPUCLOCK_WHICH(which_clock)) {
default:
return -EINVAL;
case CPUCLOCK_PROF:
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index b7713b53d07..6da14358537 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -633,7 +633,7 @@ void swsusp_close(fmode_t mode)
return;
}
- blkdev_put(resume_bdev, mode); /* move up */
+ blkdev_put(resume_bdev, mode);
}
static int swsusp_header_init(void)
diff --git a/kernel/relay.c b/kernel/relay.c
index 32b0befdcb6..09ac2008f77 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -1317,12 +1317,9 @@ static ssize_t relay_file_splice_read(struct file *in,
if (ret < 0)
break;
else if (!ret) {
- if (spliced)
- break;
- if (flags & SPLICE_F_NONBLOCK) {
+ if (flags & SPLICE_F_NONBLOCK)
ret = -EAGAIN;
- break;
- }
+ break;
}
*ppos += ret;
diff --git a/kernel/sched.c b/kernel/sched.c
index b7480fb5c3d..e4bb1dd7b30 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -6587,7 +6587,9 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
req = list_entry(rq->migration_queue.next,
struct migration_req, list);
list_del_init(&req->list);
+ spin_unlock_irq(&rq->lock);
complete(&req->done);
+ spin_lock_irq(&rq->lock);
}
spin_unlock_irq(&rq->lock);
break;
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 81787248b60..e8ab096ddfe 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -118,13 +118,13 @@ static u64 __update_sched_clock(struct sched_clock_data *scd, u64 now)
/*
* scd->clock = clamp(scd->tick_gtod + delta,
- * max(scd->tick_gtod, scd->clock),
- * max(scd->clock, scd->tick_gtod + TICK_NSEC));
+ * max(scd->tick_gtod, scd->clock),
+ * scd->tick_gtod + TICK_NSEC);
*/
clock = scd->tick_gtod + delta;
min_clock = wrap_max(scd->tick_gtod, scd->clock);
- max_clock = wrap_max(scd->clock, scd->tick_gtod + TICK_NSEC);
+ max_clock = scd->tick_gtod + TICK_NSEC;
clock = wrap_max(clock, min_clock);
clock = wrap_min(clock, max_clock);
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index 3953e4aed73..dc0b3be6b7d 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -188,7 +188,7 @@ static void check_hung_task(struct task_struct *t, unsigned long now)
if ((long)(now - t->last_switch_timestamp) <
sysctl_hung_task_timeout_secs)
return;
- if (sysctl_hung_task_warnings < 0)
+ if (!sysctl_hung_task_warnings)
return;
sysctl_hung_task_warnings--;
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index e7acfb482a6..fa05e88aa76 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -518,6 +518,28 @@ void update_wall_time(void)
/* correct the clock when NTP error is too big */
clocksource_adjust(offset);
+ /*
+ * Since in the loop above, we accumulate any amount of time
+ * in xtime_nsec over a second into xtime.tv_sec, its possible for
+ * xtime_nsec to be fairly small after the loop. Further, if we're
+ * slightly speeding the clocksource up in clocksource_adjust(),
+ * its possible the required corrective factor to xtime_nsec could
+ * cause it to underflow.
+ *
+ * Now, we cannot simply roll the accumulated second back, since
+ * the NTP subsystem has been notified via second_overflow. So
+ * instead we push xtime_nsec forward by the amount we underflowed,
+ * and add that amount into the error.
+ *
+ * We'll correct this error next time through this function, when
+ * xtime_nsec is not as small.
+ */
+ if (unlikely((s64)clock->xtime_nsec < 0)) {
+ s64 neg = -(s64)clock->xtime_nsec;
+ clock->xtime_nsec = 0;
+ clock->error += neg << (NTP_SCALE_SHIFT - clock->shift);
+ }
+
/* store full nanoseconds into xtime after rounding it up and
* add the remainder to the error difference.
*/
diff --git a/lib/idr.c b/lib/idr.c
index 7a785a0c2ea..1c4f9281f41 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -220,8 +220,14 @@ build_up:
*/
while ((layers < (MAX_LEVEL - 1)) && (id >= (1 << (layers*IDR_BITS)))) {
layers++;
- if (!p->count)
+ if (!p->count) {
+ /* special case: if the tree is currently empty,
+ * then we grow the tree by moving the top node
+ * upwards.
+ */
+ p->layer++;
continue;
+ }
if (!(new = get_from_free_list(idp))) {
/*
* The allocation failed. If we built part of
diff --git a/lib/percpu_counter.c b/lib/percpu_counter.c
index a8663890a88..b255b939bc1 100644
--- a/lib/percpu_counter.c
+++ b/lib/percpu_counter.c
@@ -62,10 +62,7 @@ s64 __percpu_counter_sum(struct percpu_counter *fbc)
for_each_online_cpu(cpu) {
s32 *pcount = per_cpu_ptr(fbc->counters, cpu);
ret += *pcount;
- *pcount = 0;
}
- fbc->count = ret;
-
spin_unlock(&fbc->lock);
return ret;
}
@@ -104,13 +101,13 @@ void percpu_counter_destroy(struct percpu_counter *fbc)
if (!fbc->counters)
return;
- free_percpu(fbc->counters);
- fbc->counters = NULL;
#ifdef CONFIG_HOTPLUG_CPU
mutex_lock(&percpu_counters_lock);
list_del(&fbc->list);
mutex_unlock(&percpu_counters_lock);
#endif
+ free_percpu(fbc->counters);
+ fbc->counters = NULL;
}
EXPORT_SYMBOL(percpu_counter_destroy);
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 2a56124dbc2..801c08b046e 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -176,7 +176,7 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent,
int ret = 0;
struct device *dev;
- if (WARN_ON(bdi->dev))
+ if (bdi->dev) /* The driver needs to use separate queues per device */
goto exit;
va_start(args, fmt);
diff --git a/mm/migrate.c b/mm/migrate.c
index 1e0d6b237f4..d8f07667fc8 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -987,25 +987,18 @@ out:
/*
* Determine the nodes of an array of pages and store it in an array of status.
*/
-static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages,
- const void __user * __user *pages,
- int __user *status)
+static void do_pages_stat_array(struct mm_struct *mm, unsigned long nr_pages,
+ const void __user **pages, int *status)
{
unsigned long i;
- int err;
down_read(&mm->mmap_sem);
for (i = 0; i < nr_pages; i++) {
- const void __user *p;
- unsigned long addr;
+ unsigned long addr = (unsigned long)(*pages);
struct vm_area_struct *vma;
struct page *page;
-
- err = -EFAULT;
- if (get_user(p, pages+i))
- goto out;
- addr = (unsigned long) p;
+ int err;
vma = find_vma(mm, addr);
if (!vma)
@@ -1024,12 +1017,52 @@ static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages,
err = page_to_nid(page);
set_status:
- put_user(err, status+i);
+ *status = err;
+
+ pages++;
+ status++;
+ }
+
+ up_read(&mm->mmap_sem);
+}
+
+/*
+ * Determine the nodes of a user array of pages and store it in
+ * a user array of status.
+ */
+static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages,
+ const void __user * __user *pages,
+ int __user *status)
+{
+#define DO_PAGES_STAT_CHUNK_NR 16
+ const void __user *chunk_pages[DO_PAGES_STAT_CHUNK_NR];
+ int chunk_status[DO_PAGES_STAT_CHUNK_NR];
+ unsigned long i, chunk_nr = DO_PAGES_STAT_CHUNK_NR;
+ int err;
+
+ for (i = 0; i < nr_pages; i += chunk_nr) {
+ if (chunk_nr + i > nr_pages)
+ chunk_nr = nr_pages - i;
+
+ err = copy_from_user(chunk_pages, &pages[i],
+ chunk_nr * sizeof(*chunk_pages));
+ if (err) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ do_pages_stat_array(mm, chunk_nr, chunk_pages, chunk_status);
+
+ err = copy_to_user(&status[i], chunk_status,
+ chunk_nr * sizeof(*chunk_status));
+ if (err) {
+ err = -EFAULT;
+ goto out;
+ }
}
err = 0;
out:
- up_read(&mm->mmap_sem);
return err;
}
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 0b3cbf090a6..ab27ff75051 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -49,6 +49,9 @@ static int __init alloc_node_page_cgroup(int nid)
start_pfn = NODE_DATA(nid)->node_start_pfn;
nr_pages = NODE_DATA(nid)->node_spanned_pages;
+ if (!nr_pages)
+ return 0;
+
table_size = sizeof(struct page_cgroup) * nr_pages;
base = __alloc_bootmem_node_nopanic(NODE_DATA(nid),
diff --git a/mm/slob.c b/mm/slob.c
index cb675d12679..bf7e8fc3aed 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -535,7 +535,7 @@ struct kmem_cache *kmem_cache_create(const char *name, size_t size,
struct kmem_cache *c;
c = slob_alloc(sizeof(struct kmem_cache),
- flags, ARCH_KMALLOC_MINALIGN, -1);
+ GFP_KERNEL, ARCH_KMALLOC_MINALIGN, -1);
if (c) {
c->name = name;
diff --git a/mm/slub.c b/mm/slub.c
index 749588a50a5..a2cd47d89e0 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -3597,7 +3597,7 @@ static int list_locations(struct kmem_cache *s, char *buf,
for (i = 0; i < t.count; i++) {
struct location *l = &t.loc[i];
- if (len > PAGE_SIZE - 100)
+ if (len > PAGE_SIZE - KSYM_SYMBOL_LEN - 100)
break;
len += sprintf(buf + len, "%7ld ", l->count);
diff --git a/mm/swap.c b/mm/swap.c
index 2881987603e..b135ec90cde 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -299,7 +299,6 @@ void lru_add_drain(void)
put_cpu();
}
-#if defined(CONFIG_NUMA) || defined(CONFIG_UNEVICTABLE_LRU)
static void lru_add_drain_per_cpu(struct work_struct *dummy)
{
lru_add_drain();
@@ -313,18 +312,6 @@ int lru_add_drain_all(void)
return schedule_on_each_cpu(lru_add_drain_per_cpu);
}
-#else
-
-/*
- * Returns 0 for success
- */
-int lru_add_drain_all(void)
-{
- lru_add_drain();
- return 0;
-}
-#endif
-
/*
* Batched page_cache_release(). Decrement the reference count on all the
* passed pages. If it fell to zero then remove the page from the LRU and
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index f3f6e075856..1ddb77ba399 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1717,7 +1717,7 @@ static int s_show(struct seq_file *m, void *p)
v->addr, v->addr + v->size, v->size);
if (v->caller) {
- char buff[2 * KSYM_NAME_LEN];
+ char buff[KSYM_SYMBOL_LEN];
seq_putc(m, ' ');
sprint_symbol(buff, (unsigned long)v->caller);
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 96fb0519eb7..755414cd49d 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -134,9 +134,11 @@ static int poll_one_napi(struct netpoll_info *npinfo,
npinfo->rx_flags |= NETPOLL_RX_DROP;
atomic_inc(&trapped);
+ set_bit(NAPI_STATE_NPSVC, &napi->state);
work = napi->poll(napi, budget);
+ clear_bit(NAPI_STATE_NPSVC, &napi->state);
atomic_dec(&trapped);
npinfo->rx_flags &= ~NETPOLL_RX_DROP;
diff --git a/net/ipv4/netfilter/nf_nat_rule.c b/net/ipv4/netfilter/nf_nat_rule.c
index cf95469ab9f..a7eb0471904 100644
--- a/net/ipv4/netfilter/nf_nat_rule.c
+++ b/net/ipv4/netfilter/nf_nat_rule.c
@@ -61,7 +61,7 @@ static struct
static struct xt_table nat_table = {
.name = "nat",
.valid_hooks = NAT_VALID_HOOKS,
- .lock = __RW_LOCK_UNLOCKED(__nat_table.lock),
+ .lock = __RW_LOCK_UNLOCKED(nat_table.lock),
.me = THIS_MODULE,
.af = AF_INET,
};
diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c
index 7cd22262de3..a453aac91bd 100644
--- a/net/ipv4/tcp_vegas.c
+++ b/net/ipv4/tcp_vegas.c
@@ -40,18 +40,14 @@
#include "tcp_vegas.h"
-/* Default values of the Vegas variables, in fixed-point representation
- * with V_PARAM_SHIFT bits to the right of the binary point.
- */
-#define V_PARAM_SHIFT 1
-static int alpha = 2<<V_PARAM_SHIFT;
-static int beta = 4<<V_PARAM_SHIFT;
-static int gamma = 1<<V_PARAM_SHIFT;
+static int alpha = 2;
+static int beta = 4;
+static int gamma = 1;
module_param(alpha, int, 0644);
-MODULE_PARM_DESC(alpha, "lower bound of packets in network (scale by 2)");
+MODULE_PARM_DESC(alpha, "lower bound of packets in network");
module_param(beta, int, 0644);
-MODULE_PARM_DESC(beta, "upper bound of packets in network (scale by 2)");
+MODULE_PARM_DESC(beta, "upper bound of packets in network");
module_param(gamma, int, 0644);
MODULE_PARM_DESC(gamma, "limit on increase (scale by 2)");
@@ -172,49 +168,13 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
return;
}
- /* The key players are v_beg_snd_una and v_beg_snd_nxt.
- *
- * These are so named because they represent the approximate values
- * of snd_una and snd_nxt at the beginning of the current RTT. More
- * precisely, they represent the amount of data sent during the RTT.
- * At the end of the RTT, when we receive an ACK for v_beg_snd_nxt,
- * we will calculate that (v_beg_snd_nxt - v_beg_snd_una) outstanding
- * bytes of data have been ACKed during the course of the RTT, giving
- * an "actual" rate of:
- *
- * (v_beg_snd_nxt - v_beg_snd_una) / (rtt duration)
- *
- * Unfortunately, v_beg_snd_una is not exactly equal to snd_una,
- * because delayed ACKs can cover more than one segment, so they
- * don't line up nicely with the boundaries of RTTs.
- *
- * Another unfortunate fact of life is that delayed ACKs delay the
- * advance of the left edge of our send window, so that the number
- * of bytes we send in an RTT is often less than our cwnd will allow.
- * So we keep track of our cwnd separately, in v_beg_snd_cwnd.
- */
-
if (after(ack, vegas->beg_snd_nxt)) {
/* Do the Vegas once-per-RTT cwnd adjustment. */
- u32 old_wnd, old_snd_cwnd;
-
-
- /* Here old_wnd is essentially the window of data that was
- * sent during the previous RTT, and has all
- * been acknowledged in the course of the RTT that ended
- * with the ACK we just received. Likewise, old_snd_cwnd
- * is the cwnd during the previous RTT.
- */
- old_wnd = (vegas->beg_snd_nxt - vegas->beg_snd_una) /
- tp->mss_cache;
- old_snd_cwnd = vegas->beg_snd_cwnd;
/* Save the extent of the current window so we can use this
* at the end of the next RTT.
*/
- vegas->beg_snd_una = vegas->beg_snd_nxt;
vegas->beg_snd_nxt = tp->snd_nxt;
- vegas->beg_snd_cwnd = tp->snd_cwnd;
/* We do the Vegas calculations only if we got enough RTT
* samples that we can be reasonably sure that we got
@@ -252,22 +212,14 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
*
* This is:
* (actual rate in segments) * baseRTT
- * We keep it as a fixed point number with
- * V_PARAM_SHIFT bits to the right of the binary point.
*/
- target_cwnd = ((u64)old_wnd * vegas->baseRTT);
- target_cwnd <<= V_PARAM_SHIFT;
- do_div(target_cwnd, rtt);
+ target_cwnd = tp->snd_cwnd * vegas->baseRTT / rtt;
/* Calculate the difference between the window we had,
* and the window we would like to have. This quantity
* is the "Diff" from the Arizona Vegas papers.
- *
- * Again, this is a fixed point number with
- * V_PARAM_SHIFT bits to the right of the binary
- * point.
*/
- diff = (old_wnd << V_PARAM_SHIFT) - target_cwnd;
+ diff = tp->snd_cwnd * (rtt-vegas->baseRTT) / vegas->baseRTT;
if (diff > gamma && tp->snd_ssthresh > 2 ) {
/* Going too fast. Time to slow down
@@ -282,16 +234,13 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
* truncation robs us of full link
* utilization.
*/
- tp->snd_cwnd = min(tp->snd_cwnd,
- ((u32)target_cwnd >>
- V_PARAM_SHIFT)+1);
+ tp->snd_cwnd = min(tp->snd_cwnd, (u32)target_cwnd+1);
} else if (tp->snd_cwnd <= tp->snd_ssthresh) {
/* Slow start. */
tcp_slow_start(tp);
} else {
/* Congestion avoidance. */
- u32 next_snd_cwnd;
/* Figure out where we would like cwnd
* to be.
@@ -300,26 +249,17 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
/* The old window was too fast, so
* we slow down.
*/
- next_snd_cwnd = old_snd_cwnd - 1;
+ tp->snd_cwnd--;
} else if (diff < alpha) {
/* We don't have enough extra packets
* in the network, so speed up.
*/
- next_snd_cwnd = old_snd_cwnd + 1;
+ tp->snd_cwnd++;
} else {
/* Sending just as fast as we
* should be.
*/
- next_snd_cwnd = old_snd_cwnd;
}
-
- /* Adjust cwnd upward or downward, toward the
- * desired value.
- */
- if (next_snd_cwnd > tp->snd_cwnd)
- tp->snd_cwnd++;
- else if (next_snd_cwnd < tp->snd_cwnd)
- tp->snd_cwnd--;
}
if (tp->snd_cwnd < 2)
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index e4acc212345..3e2970841bd 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -947,8 +947,13 @@ static void ndisc_recv_na(struct sk_buff *skb)
is invalid, but ndisc specs say nothing
about it. It could be misconfiguration, or
an smart proxy agent tries to help us :-)
+
+ We should not print the error if NA has been
+ received from loopback - it is just our own
+ unsolicited advertisement.
*/
- ND_PRINTK1(KERN_WARNING
+ if (skb->pkt_type != PACKET_LOOPBACK)
+ ND_PRINTK1(KERN_WARNING
"ICMPv6 NA: someone advertises our address on %s!\n",
ifp->idev->dev->name);
in6_ifa_put(ifp);
diff --git a/net/netfilter/xt_socket.c b/net/netfilter/xt_socket.c
index 02a8fed2108..1acc089be7e 100644
--- a/net/netfilter/xt_socket.c
+++ b/net/netfilter/xt_socket.c
@@ -141,7 +141,7 @@ socket_mt(const struct sk_buff *skb, const struct xt_match_param *par)
sk = nf_tproxy_get_sock_v4(dev_net(skb->dev), protocol,
saddr, daddr, sport, dport, par->in, false);
if (sk != NULL) {
- bool wildcard = (inet_sk(sk)->rcv_saddr == 0);
+ bool wildcard = (sk->sk_state != TCP_TIME_WAIT && inet_sk(sk)->rcv_saddr == 0);
nf_tproxy_put_sock(sk);
if (wildcard)
diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index 90c8506a0aa..8c030803217 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -562,7 +562,6 @@ static int netlbl_unlhsh_remove_addr4(struct net *net,
const struct in_addr *mask,
struct netlbl_audit *audit_info)
{
- int ret_val = 0;
struct netlbl_af4list *list_entry;
struct netlbl_unlhsh_addr4 *entry;
struct audit_buffer *audit_buf;
@@ -577,7 +576,7 @@ static int netlbl_unlhsh_remove_addr4(struct net *net,
if (list_entry != NULL)
entry = netlbl_unlhsh_addr4_entry(list_entry);
else
- ret_val = -ENOENT;
+ entry = NULL;
audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
audit_info);
@@ -588,19 +587,21 @@ static int netlbl_unlhsh_remove_addr4(struct net *net,
addr->s_addr, mask->s_addr);
if (dev != NULL)
dev_put(dev);
- if (entry && security_secid_to_secctx(entry->secid,
- &secctx,
- &secctx_len) == 0) {
+ if (entry != NULL &&
+ security_secid_to_secctx(entry->secid,
+ &secctx, &secctx_len) == 0) {
audit_log_format(audit_buf, " sec_obj=%s", secctx);
security_release_secctx(secctx, secctx_len);
}
- audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
+ audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
audit_log_end(audit_buf);
}
- if (ret_val == 0)
- call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
- return ret_val;
+ if (entry == NULL)
+ return -ENOENT;
+
+ call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
+ return 0;
}
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
@@ -624,7 +625,6 @@ static int netlbl_unlhsh_remove_addr6(struct net *net,
const struct in6_addr *mask,
struct netlbl_audit *audit_info)
{
- int ret_val = 0;
struct netlbl_af6list *list_entry;
struct netlbl_unlhsh_addr6 *entry;
struct audit_buffer *audit_buf;
@@ -638,7 +638,7 @@ static int netlbl_unlhsh_remove_addr6(struct net *net,
if (list_entry != NULL)
entry = netlbl_unlhsh_addr6_entry(list_entry);
else
- ret_val = -ENOENT;
+ entry = NULL;
audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
audit_info);
@@ -649,19 +649,21 @@ static int netlbl_unlhsh_remove_addr6(struct net *net,
addr, mask);
if (dev != NULL)
dev_put(dev);
- if (entry && security_secid_to_secctx(entry->secid,
- &secctx,
- &secctx_len) == 0) {
+ if (entry != NULL &&
+ security_secid_to_secctx(entry->secid,
+ &secctx, &secctx_len) == 0) {
audit_log_format(audit_buf, " sec_obj=%s", secctx);
security_release_secctx(secctx, secctx_len);
}
- audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
+ audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
audit_log_end(audit_buf);
}
- if (ret_val == 0)
- call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
- return ret_val;
+ if (entry == NULL)
+ return -ENOENT;
+
+ call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
+ return 0;
}
#endif /* IPv6 */
diff --git a/net/phonet/pep-gprs.c b/net/phonet/pep-gprs.c
index e6e8e44852e..22848dd7d67 100644
--- a/net/phonet/pep-gprs.c
+++ b/net/phonet/pep-gprs.c
@@ -155,12 +155,13 @@ static void gprs_data_ready(struct sock *sk, int len)
static void gprs_write_space(struct sock *sk)
{
struct gprs_dev *dev = sk->sk_user_data;
+ struct net_device *net = dev->net;
unsigned credits = pep_writeable(sk);
spin_lock_bh(&dev->tx_lock);
dev->tx_max = credits;
- if (credits > skb_queue_len(&dev->tx_queue))
- netif_wake_queue(dev->net);
+ if (credits > skb_queue_len(&dev->tx_queue) && netif_running(net))
+ netif_wake_queue(net);
spin_unlock_bh(&dev->tx_lock);
}
@@ -168,6 +169,23 @@ static void gprs_write_space(struct sock *sk)
* Network device callbacks
*/
+static int gprs_open(struct net_device *dev)
+{
+ struct gprs_dev *gp = netdev_priv(dev);
+
+ gprs_write_space(gp->sk);
+ return 0;
+}
+
+static int gprs_close(struct net_device *dev)
+{
+ struct gprs_dev *gp = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ flush_work(&gp->tx_work);
+ return 0;
+}
+
static int gprs_xmit(struct sk_buff *skb, struct net_device *net)
{
struct gprs_dev *dev = netdev_priv(net);
@@ -248,6 +266,8 @@ static void gprs_setup(struct net_device *net)
net->tx_queue_len = 10;
net->destructor = free_netdev;
+ net->open = gprs_open;
+ net->stop = gprs_close;
net->hard_start_xmit = gprs_xmit; /* mandatory */
net->change_mtu = gprs_set_mtu;
}
@@ -311,7 +331,6 @@ int gprs_attach(struct sock *sk)
dev->sk = sk;
printk(KERN_DEBUG"%s: attached\n", net->name);
- gprs_write_space(sk); /* kick off TX */
return net->ifindex;
out_rel:
@@ -334,7 +353,5 @@ void gprs_detach(struct sock *sk)
printk(KERN_DEBUG"%s: detached\n", net->name);
unregister_netdev(net);
- flush_scheduled_work();
sock_put(sk);
- skb_queue_purge(&dev->tx_queue);
}
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index f840d6b27c6..7e78f1c0f35 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -46,9 +46,6 @@
layering other disciplines. It does not need to do bandwidth
control either since that can be handled by using token
bucket or other rate control.
-
- The simulator is limited by the Linux timer resolution
- and will create packet bursts on the HZ boundary (1ms).
*/
struct netem_sched_data {
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 6f7d1f2d2f3..ef3238d665e 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -1183,7 +1183,11 @@ int svc_addsock(struct svc_serv *serv,
else if (so->state > SS_UNCONNECTED)
err = -EISCONN;
else {
- svsk = svc_setup_socket(serv, so, &err, SVC_SOCK_DEFAULTS);
+ if (!try_module_get(THIS_MODULE))
+ err = -ENOENT;
+ else
+ svsk = svc_setup_socket(serv, so, &err,
+ SVC_SOCK_DEFAULTS);
if (svsk) {
struct sockaddr_storage addr;
struct sockaddr *sin = (struct sockaddr *)&addr;
@@ -1196,7 +1200,8 @@ int svc_addsock(struct svc_serv *serv,
spin_unlock_bh(&serv->sv_lock);
svc_xprt_received(&svsk->sk_xprt);
err = 0;
- }
+ } else
+ module_put(THIS_MODULE);
}
if (err) {
sockfd_put(so);