ARM: ux500: Remove u8500 ED and V1 support

ST-Ericsson Linux next: Not tested, ask SSM for ER
ST-Ericsson ID: 342987
ST-Ericsson FOSS-OUT ID: Trivial

Change-Id: Ib41941b01f350e505d7a95f3834dd3a12e5d1f28
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/24289
Reviewed-by: QATEST
Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>

6 files changed, 28 insertions, 85 deletions

diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index f17955b45e6..fa059ec86e8 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2008-2009 ST-Ericsson
+ * Copyright (C) 2008-2009 ST-Ericsson SA
  *
  * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
  *
@@ -59,19 +59,6 @@ static struct map_desc u8500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
-};
-
-static struct map_desc u8500_ed_io_desc[] __initdata = {
-	__IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K),
-	__IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K),
-};
-
-static struct map_desc u8500_v1_io_desc[] __initdata = {
-	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE_V1, SZ_4K),
-};
-
-static struct map_desc u8500_v2_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
 };
 
@@ -86,13 +73,6 @@ void __init u8500_map_io(void)
 
 	iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
 
-	if (cpu_is_u8500ed())
-		iotable_init(u8500_ed_io_desc, ARRAY_SIZE(u8500_ed_io_desc));
-	else if (cpu_is_u8500v1())
-		iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc));
-	else if (cpu_is_u8500v2())
-		iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc));
-
 	_PRCMU_BASE = __io_address(U8500_PRCMU_BASE);
 }
 
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 049997109cf..99baa905133 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -22,7 +22,6 @@
 #define U8500_ESRAM_DMA_LCPA_OFFSET     0x10000
 
 #define U8500_DMA_LCPA_BASE    (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET)
-#define U8500_DMA_LCPA_BASE_ED	(U8500_ESRAM_BANK4 + 0x4000)
 
 #define U8500_PER3_BASE		0x80000000
 #define U8500_STM_BASE		0x80100000
@@ -40,15 +39,14 @@
 #define U8500_ASIC_ID_BASE	0x9001D000
 
 #define U8500_PER6_BASE		0xa03c0000
+#define U8500_PER7_BASE		0xa03d0000
 #define U8500_PER5_BASE		0xa03e0000
-#define U8500_PER7_BASE_ED	0xa03d0000
 
 #define U8500_SVA_BASE		0xa0100000
 #define U8500_SIA_BASE		0xa0200000
 
 #define U8500_SGA_BASE		0xa0300000
 #define U8500_MCDE_BASE		0xa0350000
-#define U8500_DMA_BASE_ED	0xa0362000
 #define U8500_DMA_BASE		0x801C0000	/* v1 */
 
 #define U8500_SBAG_BASE		0xa0390000
@@ -66,13 +64,6 @@
 #define U8500_GPIO2_BASE	(U8500_PER2_BASE + 0xE000)
 #define U8500_GPIO3_BASE	(U8500_PER5_BASE + 0x1E000)
 
-/* per7 base addresses */
-#define U8500_CR_BASE_ED	(U8500_PER7_BASE_ED + 0x8000)
-#define U8500_MTU0_BASE_ED	(U8500_PER7_BASE_ED + 0xa000)
-#define U8500_MTU1_BASE_ED	(U8500_PER7_BASE_ED + 0xb000)
-#define U8500_TZPC0_BASE_ED	(U8500_PER7_BASE_ED + 0xc000)
-#define U8500_CLKRST7_BASE_ED	(U8500_PER7_BASE_ED + 0xf000)
-
 #define U8500_UART0_BASE	(U8500_PER1_BASE + 0x0000)
 #define U8500_UART1_BASE	(U8500_PER1_BASE + 0x1000)
 
@@ -102,7 +93,6 @@
 #define U8500_SCR_BASE		(U8500_PER4_BASE + 0x05000)
 #define U8500_DMC_BASE		(U8500_PER4_BASE + 0x06000)
 #define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x07000)
-#define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000)
 #define U8500_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x68000)
 #define U8500_PRCMU_TCPM_BASE   (U8500_PER4_BASE + 0x60000)
 
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index f9b57d48d8c..9b2b9c5c8ab 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -10,20 +10,21 @@
 #ifndef __MACH_HARDWARE_H
 #define __MACH_HARDWARE_H
 
-/* macros to get at IO space when running virtually
+/*
+ * Macros to get at IO space when running virtually
  * We dont map all the peripherals, let ioremap do
  * this for us. We map only very basic peripherals here.
  */
 #define U8500_IO_VIRTUAL	0xf0000000
 #define U8500_IO_PHYSICAL	0xa0000000
 
-/* this macro is used in assembly, so no cast */
+/* This macro is used in assembly, so no cast */
 #define IO_ADDRESS(x)           \
 	(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
 
 /* typesafe io address */
 #define __io_address(n)		__io(IO_ADDRESS(n))
-/* used by some plat-nomadik code */
+/* Used by some plat-nomadik code */
 #define io_p2v(n)		__io_address(n)
 
 #include <mach/db8500-regs.h>
@@ -32,12 +33,12 @@
 /*
  * FIFO offsets for IPs
  */
-#define MSP_TX_RX_REG_OFFSET	(0)
-#define SSP_TX_RX_REG_OFFSET	(0x8)
-#define SPI_TX_RX_REG_OFFSET	(0x8)
-#define SD_MMC_TX_RX_REG_OFFSET (0x80)
-#define CRYP1_RX_REG_OFFSET	(0x10)
-#define CRYP1_TX_REG_OFFSET	(0x8)
+#define MSP_TX_RX_REG_OFFSET	0
+#define SSP_TX_RX_REG_OFFSET	0x8
+#define SPI_TX_RX_REG_OFFSET	0x8
+#define SD_MMC_TX_RX_REG_OFFSET 0x80
+#define CRYP1_RX_REG_OFFSET	0x10
+#define CRYP1_TX_REG_OFFSET	0x8
 
 /* MSP related board specific declaration************************/
 
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h
index 70835a0ed56..7bb64b08eaf 100644
--- a/arch/arm/mach-ux500/include/mach/id.h
+++ b/arch/arm/mach-ux500/include/mach/id.h
@@ -50,26 +50,6 @@ static inline bool __attribute_const__ cpu_is_u5500(void)
  * 8500 revisions
  */
 
-static inline bool __attribute_const__ cpu_is_u8500ed(void)
-{
-	return cpu_is_u8500() && dbx500_revision() == 0x00;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v1(void)
-{
-	return cpu_is_u8500() && (dbx500_revision() & 0xf0) == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v10(void)
-{
-	return cpu_is_u8500() && dbx500_revision() == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v11(void)
-{
-	return cpu_is_u8500() && dbx500_revision() == 0xA1;
-}
-
 static inline bool __attribute_const__ cpu_is_u8500v2(void)
 {
 	return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0);
@@ -92,7 +72,7 @@ static inline bool cpu_is_u8500v22(void)
 
 static inline bool cpu_is_u8500v20_or_later(void)
 {
-	return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11();
+	return cpu_is_u8500() && ((dbx500_revision() & 0xf0) >= 0xB0);
 }
 
 static inline bool ux500_is_svp(void)
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 7dd08074c37..a81385e6e78 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -52,7 +52,6 @@ static inline void arch_decomp_setup(void)
 {
 	/* Check in run time if we run on an U8500 or U5500 */
 	if (machine_is_u8500() ||
-	    machine_is_svp8500v1() ||
 	    machine_is_svp8500v2() ||
 	    machine_is_hrefv60()   ||
 	    machine_is_snowball())
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index a2926a9cc05..19299f6062d 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -2103,30 +2103,23 @@ void __init db8500_prcmu_early_init(void)
 {
 	unsigned int i;
 
-	if (cpu_is_u8500v1()) {
-		tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1);
-	} else if (cpu_is_u8500v2()) {
-		void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K);
-
-		if (tcpm_base != NULL) {
-			int version;
-			version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET);
-			prcmu_version.project_number = version & 0xFF;
-			prcmu_version.api_version = (version >> 8) & 0xFF;
-			prcmu_version.func_version = (version >> 16) & 0xFF;
-			prcmu_version.errata = (version >> 24) & 0xFF;
-			pr_info("PRCMU firmware version %d.%d.%d\n",
-				(version >> 8) & 0xFF, (version >> 16) & 0xFF,
-				(version >> 24) & 0xFF);
-			iounmap(tcpm_base);
-		}
-
-		tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
-	} else {
-		pr_err("prcmu: Unsupported chip version\n");
-		BUG();
+	void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K);
+
+	if (tcpm_base != NULL) {
+		int version;
+		version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET);
+		prcmu_version.project_number = version & 0xFF;
+		prcmu_version.api_version = (version >> 8) & 0xFF;
+		prcmu_version.func_version = (version >> 16) & 0xFF;
+		prcmu_version.errata = (version >> 24) & 0xFF;
+		pr_info("PRCMU firmware version %d.%d.%d\n",
+			(version >> 8) & 0xFF, (version >> 16) & 0xFF,
+			(version >> 24) & 0xFF);
+		iounmap(tcpm_base);
 	}
 
+	tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
+
 	spin_lock_init(&mb0_transfer.lock);
 	spin_lock_init(&mb0_transfer.dbb_irqs_lock);
 	mutex_init(&mb0_transfer.ac_wake_lock);