diff options
| author | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-03-23 08:06:43 -0300 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-03-23 08:06:43 -0300 |
| commit | 7483d45f0aee3afc0646d185cabd4af9f6cab58c (patch) | |
| tree | a312f7d77c34748bec62f0431df33007b10e4e7f /Documentation/usb/usbmon.txt | |
| parent | 3e85fc1b9fc1c7e20b9a01f2314bb633bb10501a (diff) | |
| parent | f92c97c8bd77992ff8bd6ef29a23dc82dca799cb (diff) | |
Merge branch 'staging/for_v3.4' into v4l_for_linus
* staging/for_v3.4: (10117 commits)
[media] update CARDLIST.em28xx
[media] partially reverts changeset fa5527c
[media] stb0899: fix the limits for signal strength values
[media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)
[media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e)
[media] -EINVAL -> -ENOTTY
[media] gspca - sn9c20x: Cleanup source
[media] gspca - sn9c20x: Simplify register write for capture start/stop
[media] gspca - sn9c20x: Add automatic JPEG compression mechanism
[media] gspca - sn9c20x: Greater delay in case of sensor no response
[media] gspca - sn9c20x: Optimize the code of write sequences
[media] gspca - sn9c20x: Add the JPEG compression quality control
[media] gspca - sn9c20x: Add a delay after Omnivision sensor reset
[media] gspca - sn9c20x: Propagate USB errors to higher level
[media] gspca - sn9c20x: Use the new video control mechanism
[media] gspca - sn9c20x: Fix loss of frame start
[media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k
[media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor
[media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support
[media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
...
Diffstat (limited to 'Documentation/usb/usbmon.txt')
| -rw-r--r-- | Documentation/usb/usbmon.txt | 14 |
1 files changed, 9 insertions, 5 deletions
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt index a4efa0462f0..5335fa8b06e 100644 --- a/Documentation/usb/usbmon.txt +++ b/Documentation/usb/usbmon.txt @@ -47,10 +47,11 @@ This allows to filter away annoying devices that talk continuously. 2. Find which bus connects to the desired device -Run "cat /proc/bus/usb/devices", and find the T-line which corresponds to -the device. Usually you do it by looking for the vendor string. If you have -many similar devices, unplug one and compare two /proc/bus/usb/devices outputs. -The T-line will have a bus number. Example: +Run "cat /sys/kernel/debug/usb/devices", and find the T-line which corresponds +to the device. Usually you do it by looking for the vendor string. If you have +many similar devices, unplug one and compare the two +/sys/kernel/debug/usb/devices outputs. The T-line will have a bus number. +Example: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 @@ -58,7 +59,10 @@ P: Vendor=0557 ProdID=2004 Rev= 1.00 S: Manufacturer=ATEN S: Product=UC100KM V2.00 -Bus=03 means it's bus 3. +"Bus=03" means it's bus 3. Alternatively, you can look at the output from +"lsusb" and get the bus number from the appropriate line. Example: + +Bus 003 Device 002: ID 0557:2004 ATEN UC100KM V2.00 3. Start 'cat' |