Merge branch 'master' into upstream

5 files changed, 70 insertions, 32 deletions

diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 6c9e746267d..915ae8c986c 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -603,7 +603,8 @@ start exactly where you are now.
 
 
 ----------
-Thanks to Paolo Ciarrocchi who allowed the "Development Process" section
+Thanks to Paolo Ciarrocchi who allowed the "Development Process"
+(http://linux.tar.bz/articles/2.6-development_process) section
 to be based on text he had written, and to Randy Dunlap and Gerrit
 Huizenga for some of the list of things you should and should not say.
 Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
diff --git a/Documentation/pci.txt b/Documentation/pci.txt
index 711210b38f5..66bbbf1d1ef 100644
--- a/Documentation/pci.txt
+++ b/Documentation/pci.txt
@@ -259,7 +259,17 @@ on the bus need to be capable of doing it, so this is something which needs
 to be handled by platform and generic code, not individual drivers.
 
 
-8. Obsolete functions
+8. Vendor and device identifications
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+For the future, let's avoid adding device ids to include/linux/pci_ids.h.
+
+PCI_VENDOR_ID_xxx for vendors, and a hex constant for device ids.
+
+Rationale:  PCI_VENDOR_ID_xxx constants are re-used, but device ids are not.
+    Further, device ids are arbitrary hex numbers, normally used only in a
+    single location, the pci_device_id table.
+
+9. Obsolete functions
 ~~~~~~~~~~~~~~~~~~~~~
 There are several functions which you might come across when trying to
 port an old driver to the new PCI interface.  They are no longer present
diff --git a/Documentation/power/video.txt b/Documentation/power/video.txt
index d18a57d1a53..43a889f8f08 100644
--- a/Documentation/power/video.txt
+++ b/Documentation/power/video.txt
@@ -140,7 +140,7 @@ IBM TP T41p			s3_bios (2), switch to X after resume
 IBM TP T42			s3_bios (2)
 IBM ThinkPad T42p (2373-GTG)	s3_bios (2)
 IBM TP X20			??? (*)
-IBM TP X30			s3_bios (2)
+IBM TP X30			s3_bios, s3_mode (4)
 IBM TP X31 / Type 2672-XXH      none (1), use radeontool (http://fdd.com/software/radeon/) to turn off backlight.
 IBM TP X32			none (1), but backlight is on and video is trashed after long suspend. s3_bios,s3_mode (4) works too. Perhaps that gets better results?
 IBM Thinkpad X40 Type 2371-7JG  s3_bios,s3_mode (4)
diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt
index 4692c8e77dc..b535c2a198f 100644
--- a/Documentation/sound/alsa/Audiophile-Usb.txt
+++ b/Documentation/sound/alsa/Audiophile-Usb.txt
@@ -1,4 +1,4 @@
-	Guide to using M-Audio Audiophile USB with ALSA and Jack	v1.2
+	Guide to using M-Audio Audiophile USB with ALSA and Jack	v1.3
 	========================================================
 
 	    Thibault Le Meur <Thibault.LeMeur@supelec.fr>
@@ -22,16 +22,16 @@ The device has 4 audio interfaces, and 2 MIDI ports:
  * Midi In (Mi)
  * Midi Out (Mo)
 
-The internal DAC/ADC has the following caracteristics:
+The internal DAC/ADC has the following characteristics:
 * sample depth of 16 or 24 bits
 * sample rate from 8kHz to 96kHz
-* Two ports can't use different sample depths at the same time.Moreover, the 
+* Two ports can't use different sample depths at the same time. Moreover, the 
 Audiophile USB documentation gives the following Warning: "Please exit any 
 audio application running before switching between bit depths"
 
 Due to the USB 1.1 bandwidth limitation, a limited number of interfaces can be 
 activated at the same time depending on the audio mode selected:
- * 16-bit/48kHz ==> 4 channels in/ 4 channels out
+ * 16-bit/48kHz ==> 4 channels in/4 channels out
    - Ai+Ao+Di+Do
  * 24-bit/48kHz ==> 4 channels in/2 channels out, 
                     or 2 channels in/4 channels out
@@ -41,8 +41,8 @@ activated at the same time depending on the audio mode selected:
 
 Important facts about the Digital interface:
 --------------------------------------------
- * The Do port additionnaly supports surround-encoded AC-3 and DTS passthrough, 
-though I haven't tested it under linux
+ * The Do port additionally supports surround-encoded AC-3 and DTS passthrough, 
+though I haven't tested it under Linux
    - Note that in this setup only the Do interface can be enabled
  * Apart from recording an audio digital stream, enabling the Di port is a way 
 to synchronize the device to an external sample clock
@@ -60,24 +60,23 @@ synchronization error (for instance sound played at an odd sample rate)
 The Audiophile USB MIDI ports will be automatically supported once the 
 following modules have been loaded:
  * snd-usb-audio
- * snd-seq
  * snd-seq-midi
 
-No additionnal setting is required.
+No additional setting is required.
 
 2.2 - Audio ports
 -----------------
 
 Audio functions of the Audiophile USB device are handled by the snd-usb-audio 
 module. This module can work in a default mode (without any device-specific 
-parameter), or in an advanced mode with the device-specific parameter called 
+parameter), or in an "advanced" mode with the device-specific parameter called 
 "device_setup".
 
 2.2.1 - Default Alsa driver mode
 
-The default behaviour of the snd-usb-audio driver is to parse the device 
+The default behavior of the snd-usb-audio driver is to parse the device 
 capabilities at startup and enable all functions inside the device (including 
-all ports at any sample rates and any sample depths supported). This approach 
+all ports at any supported sample rates and sample depths). This approach 
 has the advantage to let the driver easily switch from sample rates/depths 
 automatically according to the need of the application claiming the device.
 
@@ -114,9 +113,9 @@ gain).
 For people having this problem, the snd-usb-audio module has a new module 
 parameter called "device_setup".
 
-2.2.2.1 - Initializing the working mode of the Audiohile USB
+2.2.2.1 - Initializing the working mode of the Audiophile USB
 
-As far as the Audiohile USB device is concerned, this value let the user 
+As far as the Audiophile USB device is concerned, this value let the user 
 specify:
  * the sample depth
  * the sample rate
@@ -174,20 +173,20 @@ The parameter can be given:
 
 IMPORTANT NOTE WHEN SWITCHING CONFIGURATION:
 -------------------------------------------
- * You may need to _first_ intialize the module with the correct device_setup 
+ * You may need to _first_ initialize the module with the correct device_setup 
    parameter and _only_after_ turn on the Audiophile USB device
  * This is especially true when switching the sample depth:
-   - first trun off the device
-   - de-register the snd-usb-audio module
-   - change the device_setup parameter (by either manually reprobing the module 
-     or changing modprobe.conf)
+   - first turn off the device
+   - de-register the snd-usb-audio module (modprobe -r)
+   - change the device_setup parameter by changing the device_setup
+     option in /etc/modprobe.conf 
    - turn on the device
 
 2.2.2.3 - Audiophile USB's device_setup structure
 
 If you want to understand the device_setup magic numbers for the Audiophile 
 USB, you need some very basic understanding of binary computation. However, 
-this is not required to use the parameter and you may skip thi section.
+this is not required to use the parameter and you may skip this section.
 
 The device_setup is one byte long and its structure is the following:
 
@@ -231,11 +230,11 @@ Caution:
 
 2.2.3 -  USB implementation details for this device
 
-You may safely skip this section if you're not interrested in driver 
+You may safely skip this section if you're not interested in driver 
 development.
 
-This section describes some internals aspect of the device and summarize the 
-data I got by usb-snooping the windows and linux drivers.
+This section describes some internal aspects of the device and summarize the 
+data I got by usb-snooping the windows and Linux drivers.
 
 The M-Audio Audiophile USB has 7 USB Interfaces:
 a "USB interface":
@@ -277,9 +276,9 @@ Here is a short description of the AltSettings capabilities:
   - 16-bit depth, 8-48kHz sample mode
   - Synch playback (Do), audio format type III IEC1937_AC-3
 
-In order to ensure a correct intialization of the device, the driver 
+In order to ensure a correct initialization of the device, the driver 
 _must_know_ how the device will be used:
- * if DTS is choosen, only Interface 2 with AltSet nb.6 must be
+ * if DTS is chosen, only Interface 2 with AltSet nb.6 must be
    registered
  * if 96KHz only AltSets nb.1 of each interface must be selected
  * if samples are using 24bits/48KHz then AltSet 2 must me used if
@@ -290,7 +289,7 @@ _must_know_ how the device will be used:
    is not connected
 
 When device_setup is given as a parameter to the snd-usb-audio module, the 
-parse_audio_enpoint function uses a quirk called 
+parse_audio_endpoints function uses a quirk called 
 "audiophile_skip_setting_quirk" in order to prevent AltSettings not 
 corresponding to device_setup from being registered in the driver.
 
@@ -317,9 +316,8 @@ However you may see the following warning message:
 using the "default" ALSA device. This is less efficient than it could be. 
 Consider using a hardware device instead rather than using the plug layer."
 
-
 3.2 - Patching alsa to use direct pcm device
--------------------------------------------
+--------------------------------------------
 A patch for Jack by Andreas Steinmetz adds support for Big Endian devices. 
 However it has not been included in the CVS tree.
 
@@ -331,3 +329,32 @@ After having applied the patch you can run jackd with the following command
 line:
   % jackd -R -dalsa -Phw:1,0 -r48000 -p128 -n2 -D -Chw:1,1
 
+3.2 - Getting 2 input and/or output interfaces in Jack
+------------------------------------------------------
+
+As you can see, starting the Jack server this way will only enable 1 stereo
+input (Di or Ai) and 1 stereo output (Ao or Do).
+
+This is due to the following restrictions:
+* Jack can only open one capture device and one playback device at a time
+* The Audiophile USB is seen as 2 (or three) Alsa devices: hw:1,0, hw:1,1
+  (and optionally hw:1,2)
+If you want to get Ai+Di and/or Ao+Do support with Jack, you would need to
+combine the Alsa devices into one logical "complex" device.
+
+If you want to give it a try, I recommend reading the information from
+this page: http://www.sound-man.co.uk/linuxaudio/ice1712multi.html
+It is related to another device (ice1712) but can be adapted to suit
+the Audiophile USB.
+
+Enabling multiple Audiophile USB interfaces for Jackd will certainly require:
+* patching Jack with the previously mentioned "Big Endian" patch
+* patching Jackd with the MMAP_COMPLEX patch (see the ice1712 page)
+* patching the alsa-lib/src/pcm/pcm_multi.c file (see the ice1712 page)
+* define a multi device (combination of hw:1,0 and hw:1,1) in your .asoundrc
+  file 
+* start jackd with this device
+
+I had no success in testing this for now, but this may be due to my OS
+configuration. If you have any success with this kind of setup, please
+drop me an email.
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index 68eeebc17ff..1faf76383ba 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -1172,7 +1172,7 @@
   }        
 
   /* PCI IDs */
-  static struct pci_device_id snd_mychip_ids[] = {
+  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....
@@ -1565,7 +1565,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static struct pci_device_id snd_mychip_ids[] = {
+  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....