summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap1
diff options
context:
space:
mode:
authorTony Lindgren <tony@atomide.com>2010-02-15 08:49:01 -0800
committerTony Lindgren <tony@atomide.com>2010-02-15 08:49:01 -0800
commit0c8219f0302d0d27fda52c790d38406801e547ec (patch)
tree96dc93845e4a8b947fd92b4bab71efd241a02a8e /arch/arm/mach-omap1
parent4f2c49fedf833e522001bc51824b894732900a3d (diff)
omap: Make uncompress code and DEBUG_LL code generic
Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap1')
-rw-r--r--arch/arm/mach-omap1/include/mach/debug-macro.S72
1 files changed, 65 insertions, 7 deletions
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 9ea12f29e0b..b6d9584544b 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -15,18 +15,76 @@
#include <plat/serial.h>
+ .pushsection .data
+omap_uart_phys: .word 0x0
+omap_uart_virt: .word 0x0
+ .popsection
+
+ /*
+ * Note that this code won't work if the bootloader passes
+ * a wrong machine ID number in r1. To debug, just hardcode
+ * the desired UART phys and virt addresses temporarily into
+ * the omap_uart_phys and omap_uart_virt above.
+ */
.macro addruart, rx, tmp
+
+ /* Use omap_uart_phys/virt if already configured */
+9: mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =omap_uart_phys @ physical base address
+ ldrne \rx, =omap_uart_virt @ virtual base
+ ldr \rx, [\rx, #0]
+ cmp \rx, #0 @ is port configured?
+ bne 99f @ already configured
+
+ /* Check 7XX UART1 scratchpad register for uart to use */
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0xff000000 @ physical base address
+ movne \rx, #0xfe000000 @ virtual base
+ orr \rx, \rx, #0x00fb0000 @ OMAP1UART1
+ ldrb \rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)]
+ cmp \rx, #0 @ anything in 7XX scratchpad?
+ bne 10f @ found 7XX uart
+
+ /* Check 15xx/16xx UART1 scratchpad register for uart to use */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xff000000 @ physical base address
movne \rx, #0xfe000000 @ virtual base
- orr \rx, \rx, #0x00fb0000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
- orr \rx, \rx, #0x00009000 @ UART 3
-#endif
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
- orr \rx, \rx, #0x00000800 @ UART 2 & 3
-#endif
+ orr \rx, \rx, #0x00fb0000 @ OMAP1UART1
+ ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)]
+
+ /* Select the UART to use based on the UART1 scratchpad value */
+10: cmp \rx, #0 @ no port configured?
+ beq 11f @ if none, try to use UART1
+ cmp \rx, #OMAP1UART1
+ beq 11f @ configure OMAP1UART1
+ cmp \rx, #OMAP1UART2
+ beq 12f @ configure OMAP1UART2
+ cmp \rx, #OMAP1UART3
+ beq 13f @ configure OMAP2UART3
+
+ /* Configure the UART offset from the phys/virt base */
+11: mov \rx, #0x00fb0000 @ OMAP1UART1
+ b 98f
+12: mov \rx, #0x00fb0000 @ OMAP1UART1
+ orr \rx, \rx, #0x00000800 @ OMAP1UART2
+ b 98f
+13: mov \rx, #0x00fb0000 @ OMAP1UART1
+ orr \rx, \rx, #0x00000800 @ OMAP1UART2
+ orr \rx, \rx, #0x00009000 @ OMAP1UART3
+
+ /* Store both phys and virt address for the uart */
+98: add \rx, \rx, #0xff000000 @ phys base
+ ldr \tmp, =omap_uart_phys
+ str \rx, [\tmp, #0]
+ sub \rx, \rx, #0xff000000 @ phys base
+ add \rx, \rx, #0xfe000000 @ virt base
+ ldr \tmp, =omap_uart_virt
+ str \rx, [\tmp, #0]
+ b 9b
+99:
.endm
.macro senduart,rd,rx