mach-ux500: add hrefv60 GPIO pins

This will centralize all GPIO pin muxing for the different boards
in the MOP500 family to a single file. It also kills off the
deprecated support for the ED (Early Drop) ASIC, this should
never be spotted in the open and ST-Ericsson have internally
deprecated this hardware.

Signed-off-by: Bibek Basu <bibek.basu@stericsson.com>
[Rebasing and kill old ASIC support]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 7 insertions, 58 deletions

diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index d1ae6a09979..68c8375e45c 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -12,59 +12,14 @@
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 
-#include <plat/pincfg.h>
 #include <plat/ste_dma40.h>
 #include <mach/devices.h>
 #include <mach/hardware.h>
 
 #include "devices-db8500.h"
-#include "pins-db8500.h"
 #include "board-mop500.h"
 #include "ste-dma40-db8500.h"
 
-static pin_cfg_t mop500_sdi_pins[] = {
-	/* SDI0 (MicroSD slot) */
-	GPIO18_MC0_CMDDIR,
-	GPIO19_MC0_DAT0DIR,
-	GPIO20_MC0_DAT2DIR,
-	GPIO21_MC0_DAT31DIR,
-	GPIO22_MC0_FBCLK,
-	GPIO23_MC0_CLK,
-	GPIO24_MC0_CMD,
-	GPIO25_MC0_DAT0,
-	GPIO26_MC0_DAT1,
-	GPIO27_MC0_DAT2,
-	GPIO28_MC0_DAT3,
-
-	/* SDI4 (on-board eMMC) */
-	GPIO197_MC4_DAT3,
-	GPIO198_MC4_DAT2,
-	GPIO199_MC4_DAT1,
-	GPIO200_MC4_DAT0,
-	GPIO201_MC4_CMD,
-	GPIO202_MC4_FBCLK,
-	GPIO203_MC4_CLK,
-	GPIO204_MC4_DAT7,
-	GPIO205_MC4_DAT6,
-	GPIO206_MC4_DAT5,
-	GPIO207_MC4_DAT4,
-};
-
-static pin_cfg_t mop500_sdi2_pins[] = {
-	/* SDI2 (POP eMMC) */
-	GPIO128_MC2_CLK,
-	GPIO129_MC2_CMD,
-	GPIO130_MC2_FBCLK,
-	GPIO131_MC2_DAT0,
-	GPIO132_MC2_DAT1,
-	GPIO133_MC2_DAT2,
-	GPIO134_MC2_DAT3,
-	GPIO135_MC2_DAT4,
-	GPIO136_MC2_DAT5,
-	GPIO137_MC2_DAT6,
-	GPIO138_MC2_DAT7,
-};
-
 /*
  * SDI 0 (MicroSD slot)
  */
@@ -216,22 +171,16 @@ static struct mmci_platform_data mop500_sdi4_data = {
 
 void __init mop500_sdi_init(void)
 {
-	nmk_config_pins(mop500_sdi_pins, ARRAY_SIZE(mop500_sdi_pins));
+	/* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
+	if (!cpu_is_u8500v10())
+		mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
+	db8500_add_sdi2(&mop500_sdi2_data);
+
+	/* On-board eMMC */
+	db8500_add_sdi4(&mop500_sdi4_data);
 
 	/*
 	 * sdi0 will finally be added when the TC35892 initializes and calls
 	 * mop500_sdi_tc35892_init() above.
 	 */
-
-	/* PoP:ed eMMC */
-	if (!cpu_is_u8500ed()) {
-		nmk_config_pins(mop500_sdi2_pins, ARRAY_SIZE(mop500_sdi2_pins));
-		/* POP eMMC on v1.0 has problems with high speed */
-		if (!cpu_is_u8500v10())
-			mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
-		db8500_add_sdi2(&mop500_sdi2_data);
-	}
-
-	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data);
 }