[S390] cleanup s390 Kconfig

Make use of def_bool and def_tristate where possible and add sensible
defaults to the config symbols where applicable. This shortens the
defconfig file by another ~40 lines.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

4 files changed, 130 insertions, 164 deletions

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index e0b98e71ff4..3243f7a52c7 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -1,13 +1,8 @@
-config SCHED_MC
-	def_bool y
-	depends on SMP
-
 config MMU
 	def_bool y
 
 config ZONE_DMA
-	def_bool y
-	depends on 64BIT
+	def_bool y if 64BIT
 
 config LOCKDEP_SUPPORT
 	def_bool y
@@ -25,12 +20,10 @@ config RWSEM_XCHGADD_ALGORITHM
 	def_bool y
 
 config ARCH_HAS_ILOG2_U32
-	bool
-	default n
+	def_bool n
 
 config ARCH_HAS_ILOG2_U64
-	bool
-	default n
+	def_bool n
 
 config GENERIC_HWEIGHT
 	def_bool y
@@ -42,9 +35,7 @@ config GENERIC_CLOCKEVENTS
 	def_bool y
 
 config GENERIC_BUG
-	bool
-	depends on BUG
-	default y
+	def_bool y if BUG
 
 config GENERIC_BUG_RELATIVE_POINTERS
 	def_bool y
@@ -59,13 +50,10 @@ config ARCH_DMA_ADDR_T_64BIT
 	def_bool 64BIT
 
 config GENERIC_LOCKBREAK
-	bool
-	default y
-	depends on SMP && PREEMPT
+	def_bool y if SMP && PREEMPT
 
 config PGSTE
-	bool
-	default y if KVM
+	def_bool y if KVM
 
 config VIRT_CPU_ACCOUNTING
 	def_bool y
@@ -129,8 +117,7 @@ config S390
 	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
 
 config SCHED_OMIT_FRAME_POINTER
-	bool
-	default y
+	def_bool y
 
 source "init/Kconfig"
 
@@ -143,20 +130,21 @@ comment "Processor type and features"
 source "kernel/time/Kconfig"
 
 config 64BIT
-	bool "64 bit kernel"
+	def_bool y
+	prompt "64 bit kernel"
 	help
 	  Select this option if you have an IBM z/Architecture machine
 	  and want to use the 64 bit addressing mode.
 
 config 32BIT
-	bool
-	default y if !64BIT
+	def_bool y if !64BIT
 
 config KTIME_SCALAR
 	def_bool 32BIT
 
 config SMP
-	bool "Symmetric multi-processing support"
+	def_bool y
+	prompt "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -188,10 +176,10 @@ config NR_CPUS
 	  approximately sixteen kilobytes to the kernel image.
 
 config HOTPLUG_CPU
-	bool "Support for hot-pluggable CPUs"
+	def_bool y
+	prompt "Support for hot-pluggable CPUs"
 	depends on SMP
 	select HOTPLUG
-	default n
 	help
 	  Say Y here to be able to turn CPUs off and on. CPUs
 	  can be controlled through /sys/devices/system/cpu/cpu#.
@@ -207,14 +195,16 @@ config SCHED_MC
 	  increased overhead in some places.
 
 config SCHED_BOOK
-	bool "Book scheduler support"
+	def_bool y
+	prompt "Book scheduler support"
 	depends on SMP && SCHED_MC
 	help
 	  Book scheduler support improves the CPU scheduler's decision making
 	  when dealing with machines that have several books.
 
 config MATHEMU
-	bool "IEEE FPU emulation"
+	def_bool y
+	prompt "IEEE FPU emulation"
 	depends on MARCH_G5
 	help
 	  This option is required for IEEE compliant floating point arithmetic
@@ -222,7 +212,8 @@ config MATHEMU
 	  need this.
 
 config COMPAT
-	bool "Kernel support for 31 bit emulation"
+	def_bool y
+	prompt "Kernel support for 31 bit emulation"
 	depends on 64BIT
 	select COMPAT_BINFMT_ELF
 	help
@@ -232,16 +223,14 @@ config COMPAT
 	  executing 31 bit applications.  It is safe to say "Y".
 
 config SYSVIPC_COMPAT
-	bool
-	depends on COMPAT && SYSVIPC
-	default y
+	def_bool y if COMPAT && SYSVIPC
 
 config AUDIT_ARCH
-	bool
-	default y
+	def_bool y
 
 config S390_EXEC_PROTECT
-	bool "Data execute protection"
+	def_bool y
+	prompt "Data execute protection"
 	help
 	  This option allows to enable a buffer overflow protection for user
 	  space programs and it also selects the addressing mode option above.
@@ -301,7 +290,8 @@ config MARCH_Z196
 endchoice
 
 config PACK_STACK
-	bool "Pack kernel stack"
+	def_bool y
+	prompt "Pack kernel stack"
 	help
 	  This option enables the compiler option -mkernel-backchain if it
 	  is available. If the option is available the compiler supports
@@ -314,7 +304,8 @@ config PACK_STACK
 	  Say Y if you are unsure.
 
 config SMALL_STACK
-	bool "Use 8kb for kernel stack instead of 16kb"
+	def_bool n
+	prompt "Use 8kb for kernel stack instead of 16kb"
 	depends on PACK_STACK && 64BIT && !LOCKDEP
 	help
 	  If you say Y here and the compiler supports the -mkernel-backchain
@@ -326,7 +317,8 @@ config SMALL_STACK
 	  Say N if you are unsure.
 
 config CHECK_STACK
-	bool "Detect kernel stack overflow"
+	def_bool y
+	prompt "Detect kernel stack overflow"
 	help
 	  This option enables the compiler option -mstack-guard and
 	  -mstack-size if they are available. If the compiler supports them
@@ -350,7 +342,8 @@ config STACK_GUARD
 	  512 for 64 bit.
 
 config WARN_STACK
-	bool "Emit compiler warnings for function with broken stack usage"
+	def_bool n
+	prompt "Emit compiler warnings for function with broken stack usage"
 	help
 	  This option enables the compiler options -mwarn-framesize and
 	  -mwarn-dynamicstack. If the compiler supports these options it
@@ -385,24 +378,24 @@ config ARCH_SPARSEMEM_DEFAULT
 	def_bool y
 
 config ARCH_SELECT_MEMORY_MODEL
-       def_bool y
+	def_bool y
 
 config ARCH_ENABLE_MEMORY_HOTPLUG
-	def_bool y
-	depends on SPARSEMEM
+	def_bool y if SPARSEMEM
 
 config ARCH_ENABLE_MEMORY_HOTREMOVE
 	def_bool y
 
 config ARCH_HIBERNATION_POSSIBLE
-       def_bool y if 64BIT
+	def_bool y if 64BIT
 
 source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
 
 config QDIO
-	tristate "QDIO support"
+	def_tristate y
+	prompt "QDIO support"
 	---help---
 	  This driver provides the Queued Direct I/O base support for
 	  IBM System z.
@@ -413,7 +406,8 @@ config QDIO
 	  If unsure, say Y.
 
 config CHSC_SCH
-	tristate "Support for CHSC subchannels"
+	def_tristate y
+	prompt "Support for CHSC subchannels"
 	help
 	  This driver allows usage of CHSC subchannels. A CHSC subchannel
 	  is usually present on LPAR only.
@@ -431,7 +425,8 @@ config CHSC_SCH
 comment "Misc"
 
 config IPL
-	bool "Builtin IPL record support"
+	def_bool y
+	prompt "Builtin IPL record support"
 	help
 	  If you want to use the produced kernel to IPL directly from a
 	  device, you have to merge a bootsector specific to the device
@@ -463,7 +458,8 @@ config FORCE_MAX_ZONEORDER
 	default "9"
 
 config PFAULT
-	bool "Pseudo page fault support"
+	def_bool y
+	prompt "Pseudo page fault support"
 	help
 	  Select this option, if you want to use PFAULT pseudo page fault
 	  handling under VM. If running native or in LPAR, this option
@@ -475,7 +471,8 @@ config PFAULT
 	  this option.
 
 config SHARED_KERNEL
-	bool "VM shared kernel support"
+	def_bool y
+	prompt "VM shared kernel support"
 	help
 	  Select this option, if you want to share the text segment of the
 	  Linux kernel between different VM guests. This reduces memory
@@ -486,7 +483,8 @@ config SHARED_KERNEL
 	  doing and want to exploit this feature.
 
 config CMM
-	tristate "Cooperative memory management"
+	def_tristate n
+	prompt "Cooperative memory management"
 	help
 	  Select this option, if you want to enable the kernel interface
 	  to reduce the memory size of the system. This is accomplished
@@ -498,14 +496,16 @@ config CMM
 	  option.
 
 config CMM_IUCV
-	bool "IUCV special message interface to cooperative memory management"
+	def_bool y
+	prompt "IUCV special message interface to cooperative memory management"
 	depends on CMM && (SMSGIUCV=y || CMM=SMSGIUCV)
 	help
 	  Select this option to enable the special message interface to
 	  the cooperative memory management.
 
 config APPLDATA_BASE
-	bool "Linux - VM Monitor Stream, base infrastructure"
+	def_bool n
+	prompt "Linux - VM Monitor Stream, base infrastructure"
 	depends on PROC_FS
 	help
 	  This provides a kernel interface for creating and updating z/VM APPLDATA
@@ -520,7 +520,8 @@ config APPLDATA_BASE
 	  The /proc entries can also be read from, showing the current settings.
 
 config APPLDATA_MEM
-	tristate "Monitor memory management statistics"
+	def_tristate m
+	prompt "Monitor memory management statistics"
 	depends on APPLDATA_BASE && VM_EVENT_COUNTERS
 	help
 	  This provides memory management related data to the Linux - VM Monitor
@@ -536,7 +537,8 @@ config APPLDATA_MEM
 	  appldata_mem.o.
 
 config APPLDATA_OS
-	tristate "Monitor OS statistics"
+	def_tristate m
+	prompt "Monitor OS statistics"
 	depends on APPLDATA_BASE
 	help
 	  This provides OS related data to the Linux - VM Monitor Stream, like
@@ -550,7 +552,8 @@ config APPLDATA_OS
 	  appldata_os.o.
 
 config APPLDATA_NET_SUM
-	tristate "Monitor overall network statistics"
+	def_tristate m
+	prompt "Monitor overall network statistics"
 	depends on APPLDATA_BASE && NET
 	help
 	  This provides network related data to the Linux - VM Monitor Stream,
@@ -567,30 +570,32 @@ config APPLDATA_NET_SUM
 source kernel/Kconfig.hz
 
 config S390_HYPFS_FS
-	bool "s390 hypervisor file system support"
+	def_bool y
+	prompt "s390 hypervisor file system support"
 	select SYS_HYPERVISOR
-	default y
 	help
 	  This is a virtual file system intended to provide accounting
 	  information in an s390 hypervisor environment.
 
 config KEXEC
-	bool "kexec system call"
+	def_bool n
+	prompt "kexec system call"
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
 	  but is independent of hardware/microcode support.
 
 config ZFCPDUMP
-	bool "zfcpdump support"
+	def_bool n
+	prompt "zfcpdump support"
 	select SMP
-	default n
 	help
 	  Select this option if you want to build an zfcpdump enabled kernel.
 	  Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this.
 
 config S390_GUEST
-bool "s390 guest support for KVM (EXPERIMENTAL)"
+	def_bool y
+	prompt "s390 guest support for KVM (EXPERIMENTAL)"
 	depends on 64BIT && EXPERIMENTAL
 	select VIRTIO
 	select VIRTIO_RING
@@ -602,9 +607,9 @@ bool "s390 guest support for KVM (EXPERIMENTAL)"
 	  the default console.
 
 config SECCOMP
-	bool "Enable seccomp to safely compute untrusted bytecode"
+	def_bool y
+	prompt "Enable seccomp to safely compute untrusted bytecode"
 	depends on PROC_FS
-	default y
 	help
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
diff --git a/arch/s390/Kconfig.debug b/arch/s390/Kconfig.debug
index 05221b13ffb..2b380df9560 100644
--- a/arch/s390/Kconfig.debug
+++ b/arch/s390/Kconfig.debug
@@ -1,8 +1,7 @@
 menu "Kernel hacking"
 
 config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default y
+	def_bool y
 
 source "lib/Kconfig.debug"
 
@@ -19,7 +18,8 @@ config STRICT_DEVMEM
 	  If you are unsure, say Y.
 
 config DEBUG_STRICT_USER_COPY_CHECKS
-	bool "Strict user copy size checks"
+	def_bool n
+	prompt "Strict user copy size checks"
 	---help---
 	  Enabling this option turns a certain set of sanity checks for user
 	  copy operations into compile time warnings.
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index e40ac6ee652..d79697157ac 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -2,16 +2,12 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
+CONFIG_RCU_TRACE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_NS=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_COMPAT_BRK is not set
+CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
@@ -20,24 +16,12 @@ CONFIG_MODVERSIONS=y
 CONFIG_DEFAULT_DEADLINE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_64BIT=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
-CONFIG_COMPAT=y
-CONFIG_S390_EXEC_PROTECT=y
-CONFIG_PACK_STACK=y
-CONFIG_CHECK_STACK=y
 CONFIG_PREEMPT=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_QDIO=y
-CONFIG_CHSC_SCH=m
-CONFIG_IPL=y
 CONFIG_BINFMT_MISC=m
-CONFIG_PFAULT=y
 CONFIG_HZ_100=y
 CONFIG_KEXEC=y
-CONFIG_S390_GUEST=y
 CONFIG_PM=y
 CONFIG_HIBERNATION=y
 CONFIG_PACKET=y
@@ -46,16 +30,15 @@ CONFIG_NET_KEY=y
 CONFIG_AFIUCV=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
+# CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_SCTP is not set
+CONFIG_NET_SCTPPROBE=m
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_VLAN_8021Q=y
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=y
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -69,28 +52,14 @@ CONFIG_NET_CLS_U32=m
 CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_NAT=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_XIP=y
-CONFIG_BLK_DEV_XPRAM=m
-CONFIG_DASD=y
-CONFIG_DASD_PROFILE=y
-CONFIG_DASD_ECKD=y
-CONFIG_DASD_FBA=y
-CONFIG_DASD_DIAG=y
-CONFIG_DASD_EER=y
-CONFIG_VIRTIO_BLK=m
+CONFIG_VIRTIO_BLK=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -102,101 +71,92 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_ZFCP=y
-CONFIG_SCSI_DH=m
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_HP_SW=m
-CONFIG_SCSI_DH_EMC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=y
-CONFIG_DM_MIRROR=y
-CONFIG_DM_ZERO=y
-CONFIG_DM_MULTIPATH=m
+CONFIG_ZFCP_DIF=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-CONFIG_VETH=m
 CONFIG_NET_ETHERNET=y
-CONFIG_LCS=m
-CONFIG_CTCM=m
-CONFIG_QETH=y
-CONFIG_QETH_L2=y
-CONFIG_QETH_L3=y
-CONFIG_VIRTIO_NET=m
-CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_VIRTIO_NET=y
 CONFIG_RAW_DRIVER=m
-CONFIG_TN3270=y
-CONFIG_TN3270_TTY=y
-CONFIG_TN3270_FS=m
-CONFIG_TN3270_CONSOLE=y
-CONFIG_TN3215=y
-CONFIG_TN3215_CONSOLE=y
-CONFIG_SCLP_TTY=y
-CONFIG_SCLP_CONSOLE=y
-CONFIG_SCLP_VT220_TTY=y
-CONFIG_SCLP_VT220_CONSOLE=y
-CONFIG_SCLP_CPI=m
-CONFIG_SCLP_ASYNC=m
-CONFIG_S390_TAPE=m
-CONFIG_S390_TAPE_BLOCK=y
-CONFIG_S390_TAPE_34XX=m
-CONFIG_ACCESSIBILITY=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
 CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
+CONFIG_TIMER_STATS=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_RCU=y
+CONFIG_LOCK_STAT=y
+CONFIG_DEBUG_LOCKDEP=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_NOTIFIERS=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+CONFIG_KPROBES_SANITY_TEST=y
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_SAMPLES=y
-CONFIG_CRYPTO_FIPS=y
+CONFIG_DEBUG_PAGEALLOC=y
+# CONFIG_FTRACE is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_ZCRYPT=m
+CONFIG_CRYPTO_SHA1_S390=m
+CONFIG_CRYPTO_SHA256_S390=m
 CONFIG_CRYPTO_SHA512_S390=m
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC32=m
+CONFIG_CRYPTO_DES_S390=m
+CONFIG_CRYPTO_AES_S390=m
 CONFIG_CRC7=m
-CONFIG_KVM=m
-CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_BALLOON=y
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index a7251580891..f66a1bdbb61 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -4,8 +4,8 @@
 source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
-	bool "Virtualization"
-	default y
+	def_bool y
+	prompt "Virtualization"
 	---help---
 	  Say Y here to get to see options for using your Linux host to run other
 	  operating systems inside virtual machines (guests).
@@ -16,7 +16,8 @@ menuconfig VIRTUALIZATION
 if VIRTUALIZATION
 
 config KVM
-	tristate "Kernel-based Virtual Machine (KVM) support"
+	def_tristate y
+	prompt "Kernel-based Virtual Machine (KVM) support"
 	depends on HAVE_KVM && EXPERIMENTAL
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES