x86, nmi_watchdog: Remove all stub function calls from old nmi_watchdog

Now that the bulk of the old nmi_watchdog is gone, remove all
the stub variables and hooks associated with it.

This touches lots of files mainly because of how the io_apic
nmi_watchdog was implemented.  Now that the io_apic nmi_watchdog
is forever gone, remove all its fingers.

Most of this code was not being exercised by virtue of
nmi_watchdog != NMI_IO_APIC, so there shouldn't be anything to
risky here.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: fweisbec@gmail.com
Cc: gorcunov@openvz.org
LKML-Reference: <1289578944-28564-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 0 insertions, 46 deletions

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 7cc0a721f62..e4a040c28de 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -54,7 +54,6 @@
 #include <asm/dma.h>
 #include <asm/timer.h>
 #include <asm/i8259.h>
-#include <asm/nmi.h>
 #include <asm/msidef.h>
 #include <asm/hypertransport.h>
 #include <asm/setup.h>
@@ -2643,24 +2642,6 @@ static void lapic_register_intr(int irq)
 				      "edge");
 }
 
-static void __init setup_nmi(void)
-{
-	/*
-	 * Dirty trick to enable the NMI watchdog ...
-	 * We put the 8259A master into AEOI mode and
-	 * unmask on all local APICs LVT0 as NMI.
-	 *
-	 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
-	 * is from Maciej W. Rozycki - so we do not have to EOI from
-	 * the NMI handler or the timer interrupt.
-	 */
-	apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
-
-	enable_NMI_through_LVT0();
-
-	apic_printk(APIC_VERBOSE, " done.\n");
-}
-
 /*
  * This looks a bit hackish but it's about the only one way of sending
  * a few INTA cycles to 8259As and any associated glue logic.  ICR does
@@ -2766,15 +2747,6 @@ static inline void __init check_timer(void)
 	 */
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	legacy_pic->init(1);
-#ifdef CONFIG_X86_32
-	{
-		unsigned int ver;
-
-		ver = apic_read(APIC_LVR);
-		ver = GET_APIC_VERSION(ver);
-		timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
-	}
-#endif
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
 	apic1 = find_isa_irq_apic(0, mp_INT);
@@ -2822,10 +2794,6 @@ static inline void __init check_timer(void)
 				unmask_ioapic(cfg);
 		}
 		if (timer_irq_works()) {
-			if (nmi_watchdog == NMI_IO_APIC) {
-				setup_nmi();
-				legacy_pic->unmask(0);
-			}
 			if (disable_timer_pin_1 > 0)
 				clear_IO_APIC_pin(0, pin1);
 			goto out;
@@ -2851,11 +2819,6 @@ static inline void __init check_timer(void)
 		if (timer_irq_works()) {
 			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
 			timer_through_8259 = 1;
-			if (nmi_watchdog == NMI_IO_APIC) {
-				legacy_pic->mask(0);
-				setup_nmi();
-				legacy_pic->unmask(0);
-			}
 			goto out;
 		}
 		/*
@@ -2867,15 +2830,6 @@ static inline void __init check_timer(void)
 		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
 	}
 
-	if (nmi_watchdog == NMI_IO_APIC) {
-		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
-			    "through the IO-APIC - disabling NMI Watchdog!\n");
-		nmi_watchdog = NMI_NONE;
-	}
-#ifdef CONFIG_X86_32
-	timer_ack = 0;
-#endif
-
 	apic_printk(APIC_QUIET, KERN_INFO
 		    "...trying to set up timer as Virtual Wire IRQ...\n");