Imaging : Camera : Adding Support for U5500 Camera Board

This change will allow users to use B5500/S5500 Camera

ST-Ericsson Linux next: NA
ST-Ericsson ID:
ST-Ericsson FOSS-OUT ID: Trivial

Change-Id: If26b76e2f400e2c67cdb555454e92cbcef5b65d4
Signed-off-by: Nikhil Bhandary <nikhil.bhandary@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/23087
Reviewed-by: QATEST
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>

Conflicts:

	arch/arm/configs/u5500_defconfig
	arch/arm/mach-ux500/Makefile
	arch/arm/mach-ux500/board-u5500.c
	drivers/staging/Kconfig
	include/linux/mmio.h

7 files changed, 401 insertions, 2 deletions

diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index b065d2b57ca..5252fc085a7 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_MACH_U8500)	+= board-mop500.o board-mop500-sdi.o \
 obj-$(CONFIG_MACH_U5500)	+= board-u5500.o board-u5500-sdi.o \
 				   board-u5500-mcde.o board-u5500-regulators.o \
 				   board-u5500-pins.o
+obj-$(CONFIG_U5500_MMIO)	+= board-u5500-mmio.o
 obj-$(CONFIG_U8500_MMIO)	+= board-mop500-mmio.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
diff --git a/arch/arm/mach-ux500/board-u5500-mmio.c b/arch/arm/mach-ux500/board-u5500-mmio.c
new file mode 100644
index 00000000000..e88dafb90e8
--- /dev/null
+++ b/arch/arm/mach-ux500/board-u5500-mmio.c
@@ -0,0 +1,387 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson
+ * Author: Joakim Axelsson <joakim.axelsson@stericsson.com> for ST-Ericsson
+ * Author: Rajat Verma <rajat.verma@stericsson.com> for ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/mmio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/vmalloc.h>
+#include <plat/pincfg.h>
+#include <mach/gpio.h>
+#include <mach/devices.h>
+#include "board-u5500.h"
+
+struct mmio_board_data{
+	int number_of_regulators;
+	struct regulator **mmio_regulators;
+	/* * Pin configs */
+	struct mmio_gpio xshutdown_pins[CAMERA_SLOT_END];
+	/* * Internal clocks */
+	struct clk *clk_ptr_bml;
+	struct clk *clk_ptr_ipi2c;
+	/* * External clocks */
+	struct clk *clk_ptr_ext[CAMERA_SLOT_END];
+};
+
+/*
+ * Fill names of regulators required for powering up the
+ * camera sensor in below array
+ */
+static char *regulator_names[] = {"v-mmio-camera" , "v-ana"};
+
+static int mmio_clock_init(struct mmio_platform_data *pdata)
+{
+	int err;
+	struct mmio_board_data *extra = pdata->extra;
+
+	extra->clk_ptr_ext[PRIMARY_CAMERA] =
+		clk_get(pdata->dev, "primary-cam");
+	if (IS_ERR(extra->clk_ptr_ext[PRIMARY_CAMERA])) {
+		err = PTR_ERR(extra->clk_ptr_ext[PRIMARY_CAMERA]);
+		dev_err(pdata->dev,
+				"Error %d clock 'primary-cam'\n", err);
+		goto err_pri_ext_clk;
+	}
+	extra->clk_ptr_ext[SECONDARY_CAMERA] =
+		clk_get(pdata->dev, "secondary-cam");
+	if (IS_ERR(extra->clk_ptr_ext[SECONDARY_CAMERA])) {
+		err = PTR_ERR(extra->clk_ptr_ext[SECONDARY_CAMERA]);
+		dev_err(pdata->dev,
+				"Error %d clock 'secondary-cam'\n", err);
+		goto err_sec_ext_clk;
+	}
+
+	return 0;
+err_sec_ext_clk:
+	clk_put(extra->clk_ptr_ext[PRIMARY_CAMERA]);
+err_pri_ext_clk:
+	return err;
+}
+
+static void mmio_clock_exit(struct mmio_platform_data *pdata)
+{
+	struct mmio_board_data *extra = pdata->extra;
+
+	clk_put(extra->clk_ptr_ext[PRIMARY_CAMERA]);
+	clk_put(extra->clk_ptr_ext[SECONDARY_CAMERA]);
+}
+
+static int mmio_pin_cfg_init(struct mmio_platform_data *pdata)
+{
+	struct mmio_board_data *extra = pdata->extra;
+
+	extra->xshutdown_pins[PRIMARY_CAMERA].gpio =
+		GPIO_PRIMARY_CAM_XSHUTDOWN;
+	extra->xshutdown_pins[PRIMARY_CAMERA].active_high = 0;
+	extra->xshutdown_pins[PRIMARY_CAMERA].udelay = 250;
+
+	extra->xshutdown_pins[SECONDARY_CAMERA].gpio =
+		GPIO_SECONDARY_CAM_XSHUTDOWN;
+	extra->xshutdown_pins[SECONDARY_CAMERA].active_high = 0;
+	extra->xshutdown_pins[SECONDARY_CAMERA].udelay = 250;
+
+	return 0;
+}
+
+static void mmio_pin_cfg_exit(struct mmio_platform_data *pdata)
+{
+	struct mmio_board_data *extra = pdata->extra;
+}
+
+/*
+ * For now, both sensors on B5500/S5500 have some power up sequence. If
+ * different sequences are needed for primary and secondary sensors, it can
+ * be implemented easily. Just use camera_slot field of mmio_platform_data
+ * to determine which camera needs to be powered up
+ */
+static int mmio_power_init(struct mmio_platform_data *pdata)
+{
+	int err = 0, i = 0;
+	struct mmio_board_data *extra = pdata->extra;
+
+	dev_dbg(pdata->dev , "Board %s() Enter\n", __func__);
+	extra->number_of_regulators = ARRAY_SIZE(regulator_names);
+	extra->mmio_regulators =
+	    kzalloc(sizeof(struct regulator *) * extra->number_of_regulators,
+		    GFP_KERNEL);
+	if (!extra->mmio_regulators) {
+		dev_err(pdata->dev
+			, "Error allocating memory for mmio regulators\n");
+		err = -ENOMEM;
+		goto err_no_mem_reg;
+	}
+	for (i = 0; i <
+		extra->number_of_regulators; i++) {
+		extra->mmio_regulators[i] =
+			regulator_get(pdata->dev, regulator_names[i]);
+		if (IS_ERR(extra->mmio_regulators[i])) {
+			err = PTR_ERR(extra->mmio_regulators[i]);
+			dev_err(pdata->dev
+					, "Error %d getting regulator '%s'\n"
+					, err, regulator_names[i]);
+			goto err_regulator;
+		}
+	}
+	dev_dbg(pdata->dev , "Board %s() Exit\n", __func__);
+	return 0;
+err_regulator:
+	/*
+	 * Return regulators we have already requested
+	 */
+	while (i--)
+		regulator_put(extra->mmio_regulators[i]);
+	kfree(extra->mmio_regulators);
+err_no_mem_reg:
+	return err;
+}
+
+static void mmio_power_exit(struct mmio_platform_data *pdata)
+{
+	int i = 0;
+	struct mmio_board_data *extra = pdata->extra;;
+
+	for (i = 0; i < extra->number_of_regulators; i++)
+		regulator_put(extra->mmio_regulators[i]);
+	kfree(extra->mmio_regulators);
+}
+
+static int mmio_platform_init(struct mmio_platform_data *pdata)
+{
+	int err = 0;
+	struct mmio_board_data *extra = NULL;
+	dev_dbg(pdata->dev , "Board %s() Enter\n", __func__);
+	/*
+	 * Alloc memory for our own extra data
+	 */
+	extra = kzalloc(sizeof(struct mmio_board_data), GFP_KERNEL);
+	if (!extra) {
+		dev_err(pdata->dev, "%s: memory alloc failed for "
+		"mmio_board_data\n", __func__);
+		err = -ENOMEM;
+		goto err_no_mem_extra;
+	}
+	/*
+	 * Hook the data for other callbacks to use
+	 */
+	pdata->extra = extra;
+
+	pdata->camera_slot = -1;
+
+	err = mmio_power_init(pdata);
+	if (err)
+		goto err_regulator;
+	err = mmio_clock_init(pdata);
+	if (err)
+		goto err_clock;
+	err = mmio_pin_cfg_init(pdata);
+	if (err)
+		goto err_pin_cfg;
+
+	dev_dbg(pdata->dev , "Board %s() Exit\n", __func__);
+	return 0;
+
+err_pin_cfg:
+	mmio_clock_exit(pdata);
+err_clock:
+	mmio_power_exit(pdata);
+err_regulator:
+	kfree(extra);
+err_no_mem_extra:
+	return err;
+}
+
+static void mmio_platform_exit(struct mmio_platform_data *pdata)
+{
+	struct mmio_board_data *extra = pdata->extra;
+
+	mmio_power_exit(pdata);
+	mmio_clock_exit(pdata);
+	mmio_pin_cfg_exit(pdata);
+	kfree(extra);
+	pdata->extra = NULL;
+}
+
+static int mmio_power_enable(struct mmio_platform_data *pdata)
+{
+	int err = 0, i = 0;
+	struct mmio_board_data *extra = pdata->extra;
+
+	dev_dbg(pdata->dev , "Board %s() Enter\n", __func__);
+	/*
+	 * Enable the regulators
+	 */
+	for (i = 0; i < extra->number_of_regulators; i++) {
+		err = regulator_enable(extra->mmio_regulators[i]);
+		if (IS_ERR(extra->mmio_regulators[i])) {
+			err = PTR_ERR(extra->mmio_regulators[i]);
+			dev_err(pdata->dev , "Error %d enabling regulator '%s'"
+			"\n", err, regulator_names[i]);
+			goto err_regulator;
+		}
+	}
+	dev_dbg(pdata->dev , "Board %s() Exit\n", __func__);
+	return 0;
+err_regulator:
+	/*
+	 * Disable regulators we already enabled
+	 */
+	while (i--)
+		regulator_disable(extra->mmio_regulators[i]);
+	return err;
+}
+
+static void mmio_power_disable(struct mmio_platform_data *pdata)
+{
+	int i;
+	struct mmio_board_data *extra = pdata->extra;
+	/*
+	 * Disable the regulators
+	 */
+	for (i = 0; i < extra->number_of_regulators; i++)
+		regulator_disable(extra->mmio_regulators[i]);
+}
+
+static int mmio_clock_enable(struct mmio_platform_data *pdata)
+{
+	int err = 0;
+	struct mmio_board_data *extra = pdata->extra;
+
+	dev_dbg(pdata->dev , "Board %s() Enter\n", __func__);
+
+	/*
+	 * Enable appropriate external clock
+	 */
+	err = clk_enable(extra->clk_ptr_ext[pdata->camera_slot]);
+	if (err) {
+		dev_err(pdata->dev, "Error activating clock for sensor %d, err"
+			"%d\n", pdata->camera_slot, err);
+		goto err_ext_clk;
+	}
+	dev_dbg(pdata->dev , "Board %s() Exit\n", __func__);
+	return 0;
+err_ext_clk:
+	return err;
+}
+
+static void mmio_clock_disable(struct mmio_platform_data *pdata)
+{
+	struct mmio_board_data *extra = pdata->extra;
+
+	clk_disable(extra->clk_ptr_ext[pdata->camera_slot]);
+}
+
+static int mmio_config_xshutdown_pins(struct mmio_platform_data *pdata,
+				      enum mmio_select_xshutdown_t select,
+				      int is_active_high)
+{
+	int err = 0;
+	struct mmio_board_data *extra = pdata->extra;
+
+	dev_dbg(pdata->dev , "Board %s() Enter\n", __func__);
+	switch (select) {
+	case MMIO_ENABLE_XSHUTDOWN_HOST:
+		extra->xshutdown_pins[pdata->camera_slot].active_high =
+			is_active_high;
+		dev_dbg(pdata->dev , "Enabling Xshutdown GPIO PIN = %d",
+			extra->xshutdown_pins[pdata->camera_slot].gpio);
+
+		err = gpio_request
+			(extra->xshutdown_pins[pdata->camera_slot].gpio,
+				"MMIO GPIO");
+		if (err) {
+			dev_err(pdata->dev, "Error %d while requesting"
+					"Xshutdown MMIO GPIO\n",
+					err);
+			return err;
+		}
+
+		err = gpio_direction_output
+			(extra->xshutdown_pins[pdata->camera_slot].gpio,
+				0);
+		if (err) {
+			dev_err(pdata->dev, "Error %d while setting"
+					"Xshutdown MMIO GPIO"
+					"output mode\n", err);
+			return err;
+		}
+		break;
+	case MMIO_DISABLE_XSHUTDOWN:
+		dev_dbg(pdata->dev , "Disabling Xshutdown GPIO PIN = %d",
+			extra->xshutdown_pins[pdata->camera_slot].gpio);
+		gpio_free(extra->xshutdown_pins[pdata->camera_slot].gpio);
+		break;
+	default:
+		break;
+	}
+	if (err)
+		dev_err(pdata->dev , "Error configuring xshutdown, err = %d\n",
+		err);
+	return err;
+}
+
+static void mmio_set_xshutdown(struct mmio_platform_data *pdata)
+{
+	struct mmio_board_data *extra = pdata->extra;
+
+	gpio_set_value(extra->xshutdown_pins[pdata->camera_slot].gpio ,
+			(extra->xshutdown_pins[pdata->camera_slot].active_high
+			? 1 : 0));
+	udelay(extra->xshutdown_pins[pdata->camera_slot].udelay);
+}
+
+/*
+ * TODO: This function would be removed in futute.
+ * Since this function is called frequently
+ * from HSM Camera code , it is kept for Legacy.
+ */
+static int mmio_config_i2c_pins(struct mmio_platform_data *pdata,
+				enum mmio_select_i2c_t select)
+{
+	int err = 0;
+
+	switch (select) {
+	case MMIO_ACTIVATE_I2C_HOST:
+		dev_dbg(pdata->dev , "Activate I2C from Host called\n");
+		break;
+	case MMIO_DEACTIVATE_I2C:
+		dev_dbg(pdata->dev , "DeActivate I2C from Host called\n");
+		break;
+	default:
+		break;
+	}
+
+	return err;
+}
+
+static struct mmio_platform_data mmio_config = {
+	.platform_init = mmio_platform_init,
+	.platform_exit = mmio_platform_exit,
+	.power_enable = mmio_power_enable,
+	.power_disable = mmio_power_disable,
+	.clock_enable = mmio_clock_enable,
+	.clock_disable = mmio_clock_disable,
+	.config_i2c_pins = mmio_config_i2c_pins,
+	.config_xshutdown_pins = mmio_config_xshutdown_pins,
+	.set_xshutdown = mmio_set_xshutdown
+};
+
+struct platform_device u5500_mmio_device = {
+	.name = MMIO_NAME,
+	.id = -1,
+	.dev = {
+		.platform_data = &mmio_config,
+	}
+};
diff --git a/arch/arm/mach-ux500/board-u5500-pins.c b/arch/arm/mach-ux500/board-u5500-pins.c
index 11b4a95f5cb..18cc60796bb 100644
--- a/arch/arm/mach-ux500/board-u5500-pins.c
+++ b/arch/arm/mach-ux500/board-u5500-pins.c
@@ -90,6 +90,10 @@ static pin_cfg_t u5500_pins_default[] = {
 
 	/* Display & HDMI HW sync */
 	GPIO204_LCD_VSI1	| PIN_INPUT_PULLUP,
+
+	/* Camera & MMIO XshutDown*/
+	GPIO1_GPIO		| PIN_OUTPUT_LOW,
+	GPIO2_GPIO		| PIN_OUTPUT_LOW,
 };
 
 static UX500_PINS(u5500_pins_i2c1,
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 247a2d30b92..3759a815261 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -356,6 +356,9 @@ static struct platform_device *u5500_platform_devices[] __initdata = {
 	&ux500_hwmem_device,
 	&u5500_b2r2_device,
 	&u5500_mloader_device,
+#ifdef CONFIG_U5500_MMIO
+	&u5500_mmio_device,
+#endif
 };
 
 static void __init u5500_i2c_init(void)
diff --git a/arch/arm/mach-ux500/board-u5500.h b/arch/arm/mach-ux500/board-u5500.h
index 8ff1c7834db..dda59f39bdf 100644
--- a/arch/arm/mach-ux500/board-u5500.h
+++ b/arch/arm/mach-ux500/board-u5500.h
@@ -10,6 +10,9 @@
 #define GPIO_SDMMC_CD          180
 #define GPIO_MMC_CARD_CTRL     227
 #define GPIO_MMC_CARD_VSEL     185
+#define GPIO_PRIMARY_CAM_XSHUTDOWN  1
+#define GPIO_SECONDARY_CAM_XSHUTDOWN  2
+
 
 struct ab5500_regulator_platform_data;
 extern struct ab5500_regulator_platform_data u5500_ab5500_regulator_data;
diff --git a/arch/arm/mach-ux500/clock-db5500.c b/arch/arm/mach-ux500/clock-db5500.c
index 0d019a6f44c..93f65e5cc79 100644
--- a/arch/arm/mach-ux500/clock-db5500.c
+++ b/arch/arm/mach-ux500/clock-db5500.c
@@ -741,8 +741,8 @@ static struct clk_lookup db5500_prcc_clocks[] = {
 };
 
 static struct clk_lookup db5500_clkouts[] = {
-	CLK_LOOKUP(clkout1, "pri-cam", NULL),
-	CLK_LOOKUP(clkout1, "sec-cam", NULL),
+	CLK_LOOKUP(clkout1, "mmio_camera", "primary-cam"),
+	CLK_LOOKUP(clkout1, "mmio_camera", "secondary-cam"),
 };
 
 static struct clk_lookup u5500_clocks[] = {
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index 33d29990680..c10333a5e0a 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -31,6 +31,7 @@ extern struct platform_device u8500_dma40_device;
 extern struct platform_device ux500_ske_keypad_device;
 extern struct platform_device u8500_hsi_device;
 extern struct platform_device ux500_mmio_device;
+extern struct platform_device u5500_mmio_device;
 
 void dma40_u8500ed_fixup(void);