diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/char/ipmi/ipmi_poweroff.c |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/char/ipmi/ipmi_poweroff.c')
-rw-r--r-- | drivers/char/ipmi/ipmi_poweroff.c | 549 |
1 files changed, 549 insertions, 0 deletions
diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c new file mode 100644 index 00000000000..cb5cdc6f14b --- /dev/null +++ b/drivers/char/ipmi/ipmi_poweroff.c @@ -0,0 +1,549 @@ +/* + * ipmi_poweroff.c + * + * MontaVista IPMI Poweroff extension to sys_reboot + * + * Author: MontaVista Software, Inc. + * Steven Dake <sdake@mvista.com> + * Corey Minyard <cminyard@mvista.com> + * source@mvista.com + * + * Copyright 2002,2004 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <asm/semaphore.h> +#include <linux/kdev_t.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/ipmi.h> +#include <linux/ipmi_smi.h> + +#define PFX "IPMI poweroff: " +#define IPMI_POWEROFF_VERSION "v33" + +/* Where to we insert our poweroff function? */ +extern void (*pm_power_off)(void); + +/* Stuff from the get device id command. */ +static unsigned int mfg_id; +static unsigned int prod_id; +static unsigned char capabilities; + +/* We use our own messages for this operation, we don't let the system + allocate them, since we may be in a panic situation. The whole + thing is single-threaded, anyway, so multiple messages are not + required. */ +static void dummy_smi_free(struct ipmi_smi_msg *msg) +{ +} +static void dummy_recv_free(struct ipmi_recv_msg *msg) +{ +} +static struct ipmi_smi_msg halt_smi_msg = +{ + .done = dummy_smi_free +}; +static struct ipmi_recv_msg halt_recv_msg = +{ + .done = dummy_recv_free +}; + + +/* + * Code to send a message and wait for the reponse. + */ + +static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data) +{ + struct semaphore *sem = recv_msg->user_msg_data; + + if (sem) + up(sem); +} + +static struct ipmi_user_hndl ipmi_poweroff_handler = +{ + .ipmi_recv_hndl = receive_handler +}; + + +static int ipmi_request_wait_for_response(ipmi_user_t user, + struct ipmi_addr *addr, + struct kernel_ipmi_msg *send_msg) +{ + int rv; + struct semaphore sem; + + sema_init (&sem, 0); + + rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, &sem, + &halt_smi_msg, &halt_recv_msg, 0); + if (rv) + return rv; + + down (&sem); + + return halt_recv_msg.msg.data[0]; +} + +/* We are in run-to-completion mode, no semaphore is desired. */ +static int ipmi_request_in_rc_mode(ipmi_user_t user, + struct ipmi_addr *addr, + struct kernel_ipmi_msg *send_msg) +{ + int rv; + + rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, NULL, + &halt_smi_msg, &halt_recv_msg, 0); + if (rv) + return rv; + + return halt_recv_msg.msg.data[0]; +} + +/* + * ATCA Support + */ + +#define IPMI_NETFN_ATCA 0x2c +#define IPMI_ATCA_SET_POWER_CMD 0x11 +#define IPMI_ATCA_GET_ADDR_INFO_CMD 0x01 +#define IPMI_PICMG_ID 0 + +static int ipmi_atca_detect (ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[1]; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + /* + * Use get address info to check and see if we are ATCA + */ + send_msg.netfn = IPMI_NETFN_ATCA; + send_msg.cmd = IPMI_ATCA_GET_ADDR_INFO_CMD; + data[0] = IPMI_PICMG_ID; + send_msg.data = data; + send_msg.data_len = sizeof(data); + rv = ipmi_request_wait_for_response(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + return !rv; +} + +static void ipmi_poweroff_atca (ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[4]; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + printk(KERN_INFO PFX "Powering down via ATCA power command\n"); + + /* + * Power down + */ + send_msg.netfn = IPMI_NETFN_ATCA; + send_msg.cmd = IPMI_ATCA_SET_POWER_CMD; + data[0] = IPMI_PICMG_ID; + data[1] = 0; /* FRU id */ + data[2] = 0; /* Power Level */ + data[3] = 0; /* Don't change saved presets */ + send_msg.data = data; + send_msg.data_len = sizeof (data); + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) { + printk(KERN_ERR PFX "Unable to send ATCA powerdown message," + " IPMI error 0x%x\n", rv); + goto out; + } + + out: + return; +} + +/* + * CPI1 Support + */ + +#define IPMI_NETFN_OEM_1 0xf8 +#define OEM_GRP_CMD_SET_RESET_STATE 0x84 +#define OEM_GRP_CMD_SET_POWER_STATE 0x82 +#define IPMI_NETFN_OEM_8 0xf8 +#define OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL 0x80 +#define OEM_GRP_CMD_GET_SLOT_GA 0xa3 +#define IPMI_NETFN_SENSOR_EVT 0x10 +#define IPMI_CMD_GET_EVENT_RECEIVER 0x01 + +#define IPMI_CPI1_PRODUCT_ID 0x000157 +#define IPMI_CPI1_MANUFACTURER_ID 0x0108 + +static int ipmi_cpi1_detect (ipmi_user_t user) +{ + return ((mfg_id == IPMI_CPI1_MANUFACTURER_ID) + && (prod_id == IPMI_CPI1_PRODUCT_ID)); +} + +static void ipmi_poweroff_cpi1 (ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct ipmi_ipmb_addr ipmb_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[1]; + int slot; + unsigned char hotswap_ipmb; + unsigned char aer_addr; + unsigned char aer_lun; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + printk(KERN_INFO PFX "Powering down via CPI1 power command\n"); + + /* + * Get IPMI ipmb address + */ + send_msg.netfn = IPMI_NETFN_OEM_8 >> 2; + send_msg.cmd = OEM_GRP_CMD_GET_SLOT_GA; + send_msg.data = NULL; + send_msg.data_len = 0; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + slot = halt_recv_msg.msg.data[1]; + hotswap_ipmb = (slot > 9) ? (0xb0 + 2 * slot) : (0xae + 2 * slot); + + /* + * Get active event receiver + */ + send_msg.netfn = IPMI_NETFN_SENSOR_EVT >> 2; + send_msg.cmd = IPMI_CMD_GET_EVENT_RECEIVER; + send_msg.data = NULL; + send_msg.data_len = 0; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + aer_addr = halt_recv_msg.msg.data[1]; + aer_lun = halt_recv_msg.msg.data[2]; + + /* + * Setup IPMB address target instead of local target + */ + ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE; + ipmb_addr.channel = 0; + ipmb_addr.slave_addr = aer_addr; + ipmb_addr.lun = aer_lun; + + /* + * Send request hotswap control to remove blade from dpv + */ + send_msg.netfn = IPMI_NETFN_OEM_8 >> 2; + send_msg.cmd = OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL; + send_msg.data = &hotswap_ipmb; + send_msg.data_len = 1; + ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &ipmb_addr, + &send_msg); + + /* + * Set reset asserted + */ + send_msg.netfn = IPMI_NETFN_OEM_1 >> 2; + send_msg.cmd = OEM_GRP_CMD_SET_RESET_STATE; + send_msg.data = data; + data[0] = 1; /* Reset asserted state */ + send_msg.data_len = 1; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + + /* + * Power down + */ + send_msg.netfn = IPMI_NETFN_OEM_1 >> 2; + send_msg.cmd = OEM_GRP_CMD_SET_POWER_STATE; + send_msg.data = data; + data[0] = 1; /* Power down state */ + send_msg.data_len = 1; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + + out: + return; +} + +/* + * Standard chassis support + */ + +#define IPMI_NETFN_CHASSIS_REQUEST 0 +#define IPMI_CHASSIS_CONTROL_CMD 0x02 + +static int ipmi_chassis_detect (ipmi_user_t user) +{ + /* Chassis support, use it. */ + return (capabilities & 0x80); +} + +static void ipmi_poweroff_chassis (ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[1]; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + printk(KERN_INFO PFX "Powering down via IPMI chassis control command\n"); + + /* + * Power down + */ + send_msg.netfn = IPMI_NETFN_CHASSIS_REQUEST; + send_msg.cmd = IPMI_CHASSIS_CONTROL_CMD; + data[0] = 0; /* Power down */ + send_msg.data = data; + send_msg.data_len = sizeof(data); + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) { + printk(KERN_ERR PFX "Unable to send chassis powerdown message," + " IPMI error 0x%x\n", rv); + goto out; + } + + out: + return; +} + + +/* Table of possible power off functions. */ +struct poweroff_function { + char *platform_type; + int (*detect)(ipmi_user_t user); + void (*poweroff_func)(ipmi_user_t user); +}; + +static struct poweroff_function poweroff_functions[] = { + { .platform_type = "ATCA", + .detect = ipmi_atca_detect, + .poweroff_func = ipmi_poweroff_atca }, + { .platform_type = "CPI1", + .detect = ipmi_cpi1_detect, + .poweroff_func = ipmi_poweroff_cpi1 }, + /* Chassis should generally be last, other things should override + it. */ + { .platform_type = "chassis", + .detect = ipmi_chassis_detect, + .poweroff_func = ipmi_poweroff_chassis }, +}; +#define NUM_PO_FUNCS (sizeof(poweroff_functions) \ + / sizeof(struct poweroff_function)) + + +/* Our local state. */ +static int ready = 0; +static ipmi_user_t ipmi_user; +static void (*specific_poweroff_func)(ipmi_user_t user) = NULL; + +/* Holds the old poweroff function so we can restore it on removal. */ +static void (*old_poweroff_func)(void); + + +/* Called on a powerdown request. */ +static void ipmi_poweroff_function (void) +{ + if (!ready) + return; + + /* Use run-to-completion mode, since interrupts may be off. */ + ipmi_user_set_run_to_completion(ipmi_user, 1); + specific_poweroff_func(ipmi_user); + ipmi_user_set_run_to_completion(ipmi_user, 0); +} + +/* Wait for an IPMI interface to be installed, the first one installed + will be grabbed by this code and used to perform the powerdown. */ +static void ipmi_po_new_smi(int if_num) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + int i; + + if (ready) + return; + + rv = ipmi_create_user(if_num, &ipmi_poweroff_handler, NULL, &ipmi_user); + if (rv) { + printk(KERN_ERR PFX "could not create IPMI user, error %d\n", + rv); + return; + } + + /* + * Do a get device ide and store some results, since this is + * used by several functions. + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + send_msg.netfn = IPMI_NETFN_APP_REQUEST; + send_msg.cmd = IPMI_GET_DEVICE_ID_CMD; + send_msg.data = NULL; + send_msg.data_len = 0; + rv = ipmi_request_wait_for_response(ipmi_user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) { + printk(KERN_ERR PFX "Unable to send IPMI get device id info," + " IPMI error 0x%x\n", rv); + goto out_err; + } + + if (halt_recv_msg.msg.data_len < 12) { + printk(KERN_ERR PFX "(chassis) IPMI get device id info too," + " short, was %d bytes, needed %d bytes\n", + halt_recv_msg.msg.data_len, 12); + goto out_err; + } + + mfg_id = (halt_recv_msg.msg.data[7] + | (halt_recv_msg.msg.data[8] << 8) + | (halt_recv_msg.msg.data[9] << 16)); + prod_id = (halt_recv_msg.msg.data[10] + | (halt_recv_msg.msg.data[11] << 8)); + capabilities = halt_recv_msg.msg.data[6]; + + + /* Scan for a poweroff method */ + for (i=0; i<NUM_PO_FUNCS; i++) { + if (poweroff_functions[i].detect(ipmi_user)) + goto found; + } + + out_err: + printk(KERN_ERR PFX "Unable to find a poweroff function that" + " will work, giving up\n"); + ipmi_destroy_user(ipmi_user); + return; + + found: + printk(KERN_INFO PFX "Found a %s style poweroff function\n", + poweroff_functions[i].platform_type); + specific_poweroff_func = poweroff_functions[i].poweroff_func; + old_poweroff_func = pm_power_off; + pm_power_off = ipmi_poweroff_function; + ready = 1; +} + +static void ipmi_po_smi_gone(int if_num) +{ + /* This can never be called, because once poweroff driver is + registered, the interface can't go away until the power + driver is unregistered. */ +} + +static struct ipmi_smi_watcher smi_watcher = +{ + .owner = THIS_MODULE, + .new_smi = ipmi_po_new_smi, + .smi_gone = ipmi_po_smi_gone +}; + + +/* + * Startup and shutdown functions. + */ +static int ipmi_poweroff_init (void) +{ + int rv; + + printk ("Copyright (C) 2004 MontaVista Software -" + " IPMI Powerdown via sys_reboot version " + IPMI_POWEROFF_VERSION ".\n"); + + rv = ipmi_smi_watcher_register(&smi_watcher); + if (rv) + printk(KERN_ERR PFX "Unable to register SMI watcher: %d\n", rv); + + return rv; +} + +#ifdef MODULE +static __exit void ipmi_poweroff_cleanup(void) +{ + int rv; + + ipmi_smi_watcher_unregister(&smi_watcher); + + if (ready) { + rv = ipmi_destroy_user(ipmi_user); + if (rv) + printk(KERN_ERR PFX "could not cleanup the IPMI" + " user: 0x%x\n", rv); + pm_power_off = old_poweroff_func; + } +} +module_exit(ipmi_poweroff_cleanup); +#endif + +module_init(ipmi_poweroff_init); +MODULE_LICENSE("GPL"); |