hwmon: Add f75375s driver

Add support for Fintek F75375S/SP and F75373.

Signed-off-by: Riku Voipio <riku.voipio@movial.fi>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

1 files changed, 691 insertions, 0 deletions

diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
new file mode 100644
index 00000000000..6425184d931
--- /dev/null
+++ b/drivers/hwmon/f75375s.c
@@ -0,0 +1,691 @@
+/*
+ * f75375s.c - driver for the Fintek F75375/SP and F75373
+ *             hardware monitoring features
+ * Copyright (C) 2006-2007  Riku Voipio <riku.voipio@movial.fi>
+ *
+ * Datasheets available at:
+ *
+ * f75375:
+ * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf
+ *
+ * f75373:
+ * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_2(f75373, f75375);
+
+/* Fintek F75375 registers  */
+#define F75375_REG_CONFIG0		0x0
+#define F75375_REG_CONFIG1		0x1
+#define F75375_REG_CONFIG2		0x2
+#define F75375_REG_CONFIG3		0x3
+#define F75375_REG_ADDR			0x4
+#define F75375_REG_INTR			0x31
+#define F75375_CHIP_ID			0x5A
+#define F75375_REG_VERSION		0x5C
+#define F75375_REG_VENDOR		0x5D
+#define F75375_REG_FAN_TIMER		0x60
+
+#define F75375_REG_VOLT(nr)		(0x10 + (nr))
+#define F75375_REG_VOLT_HIGH(nr)	(0x20 + (nr) * 2)
+#define F75375_REG_VOLT_LOW(nr)		(0x21 + (nr) * 2)
+
+#define F75375_REG_TEMP(nr)		(0x14 + (nr))
+#define F75375_REG_TEMP_HIGH(nr)	(0x28 + (nr) * 2)
+#define F75375_REG_TEMP_HYST(nr)	(0x29 + (nr) * 2)
+
+#define F75375_REG_FAN(nr)		(0x16 + (nr) * 2)
+#define F75375_REG_FAN_MIN(nr)		(0x2C + (nr) * 2)
+#define F75375_REG_FAN_FULL(nr)		(0x70 + (nr) * 0x10)
+#define F75375_REG_FAN_PWM_DUTY(nr)	(0x76 + (nr) * 0x10)
+#define F75375_REG_FAN_PWM_CLOCK(nr)	(0x7D + (nr) * 0x10)
+
+#define F75375_REG_FAN_EXP(nr)		(0x74 + (nr) * 0x10)
+#define F75375_REG_FAN_B_TEMP(nr, step)	((0xA0 + (nr) * 0x10) + (step))
+#define F75375_REG_FAN_B_SPEED(nr, step) \
+	((0xA5 + (nr) * 0x10) + (step) * 2)
+
+#define F75375_REG_PWM1_RAISE_DUTY	0x69
+#define F75375_REG_PWM2_RAISE_DUTY	0x6A
+#define F75375_REG_PWM1_DROP_DUTY	0x6B
+#define F75375_REG_PWM2_DROP_DUTY	0x6C
+
+#define FAN_CTRL_LINEAR(nr)		(4 + nr)
+#define FAN_CTRL_MODE(nr)		(5 + ((nr) * 2))
+
+/*
+ * Data structures and manipulation thereof
+ */
+
+struct f75375_data {
+	unsigned short addr;
+	struct i2c_client client;
+	struct class_device *class_dev;
+
+	const char *name;
+	int kind;
+	struct mutex update_lock; /* protect register access */
+	char valid;
+	unsigned long last_updated;	/* In jiffies */
+	unsigned long last_limits;	/* In jiffies */
+
+	/* Register values */
+	u8 in[4];
+	u8 in_max[4];
+	u8 in_min[4];
+	u16 fan[2];
+	u16 fan_min[2];
+	u16 fan_full[2];
+	u16 fan_exp[2];
+	u8 fan_timer;
+	u8 pwm[2];
+	u8 pwm_mode[2];
+	u8 pwm_enable[2];
+	s8 temp[2];
+	s8 temp_high[2];
+	s8 temp_max_hyst[2];
+};
+
+static int f75375_attach_adapter(struct i2c_adapter *adapter);
+static int f75375_detect(struct i2c_adapter *adapter, int address, int kind);
+static int f75375_detach_client(struct i2c_client *client);
+
+static struct i2c_driver f75375_driver = {
+	.driver = {
+		.name = "f75375",
+	},
+	.attach_adapter = f75375_attach_adapter,
+	.detach_client = f75375_detach_client,
+};
+
+static inline int f75375_read8(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+/* in most cases, should be called while holding update_lock */
+static inline u16 f75375_read16(struct i2c_client *client, u8 reg)
+{
+	return ((i2c_smbus_read_byte_data(client, reg) << 8)
+		| i2c_smbus_read_byte_data(client, reg + 1));
+}
+
+static inline void f75375_write8(struct i2c_client *client, u8 reg,
+		u8 value)
+{
+	i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static inline void f75375_write16(struct i2c_client *client, u8 reg,
+		u16 value)
+{
+	int err = i2c_smbus_write_byte_data(client, reg, (value << 8));
+	if (err)
+		return;
+	i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF));
+}
+
+static struct f75375_data *f75375_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct f75375_data *data = i2c_get_clientdata(client);
+	int nr;
+
+	mutex_lock(&data->update_lock);
+
+	/* Limit registers cache is refreshed after 60 seconds */
+	if (time_after(jiffies, data->last_limits + 60 * HZ)
+		|| !data->valid) {
+		for (nr = 0; nr < 2; nr++) {
+			data->temp_high[nr] =
+				f75375_read8(client, F75375_REG_TEMP_HIGH(nr));
+			data->temp_max_hyst[nr] =
+				f75375_read8(client, F75375_REG_TEMP_HYST(nr));
+			data->fan_full[nr] =
+				f75375_read16(client, F75375_REG_FAN_FULL(nr));
+			data->fan_min[nr] =
+				f75375_read16(client, F75375_REG_FAN_MIN(nr));
+			data->fan_exp[nr] =
+				f75375_read16(client, F75375_REG_FAN_EXP(nr));
+			data->pwm[nr] =	f75375_read8(client,
+				F75375_REG_FAN_PWM_DUTY(nr));
+
+		}
+		for (nr = 0; nr < 4; nr++) {
+			data->in_max[nr] =
+				f75375_read8(client, F75375_REG_VOLT_HIGH(nr));
+			data->in_min[nr] =
+				f75375_read8(client, F75375_REG_VOLT_LOW(nr));
+		}
+		data->fan_timer = f75375_read8(client, F75375_REG_FAN_TIMER);
+		data->last_limits = jiffies;
+	}
+
+	/* Measurement registers cache is refreshed after 2 second */
+	if (time_after(jiffies, data->last_updated + 2 * HZ)
+		|| !data->valid) {
+		for (nr = 0; nr < 2; nr++) {
+			data->temp[nr] =
+				f75375_read8(client, F75375_REG_TEMP(nr));
+			data->fan[nr] =
+				f75375_read16(client, F75375_REG_FAN(nr));
+		}
+		for (nr = 0; nr < 4; nr++)
+			data->in[nr] =
+				f75375_read8(client, F75375_REG_VOLT(nr));
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->update_lock);
+	return data;
+}
+
+static inline u16 rpm_from_reg(u16 reg)
+{
+	if (reg == 0 || reg == 0xffff)
+		return 0;
+	return (1500000 / reg);
+}
+
+static inline u16 rpm_to_reg(int rpm)
+{
+	if (rpm < 367 || rpm > 0xffff)
+		return 0xffff;
+	return (1500000 / rpm);
+}
+
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct f75375_data *data = i2c_get_clientdata(client);
+	int val = simple_strtoul(buf, NULL, 10);
+
+	mutex_lock(&data->update_lock);
+	data->fan_min[nr] = rpm_to_reg(val);
+	f75375_write16(client, F75375_REG_FAN_MIN(nr), data->fan_min[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_fan_exp(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct f75375_data *data = i2c_get_clientdata(client);
+	int val = simple_strtoul(buf, NULL, 10);
+
+	mutex_lock(&data->update_lock);
+	data->fan_exp[nr] = rpm_to_reg(val);
+	f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_exp[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct f75375_data *data = i2c_get_clientdata(client);
+	int val = simple_strtoul(buf, NULL, 10);
+
+	mutex_lock(&data->update_lock);
+	data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
+	f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), data->pwm[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
+		*attr, char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct f75375_data *data = f75375_update_device(dev);
+	return sprintf(buf, "%d\n", data->pwm_enable[nr]);
+}
+
+static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct f75375_data *data = i2c_get_clientdata(client);
+	int val = simple_strtoul(buf, NULL, 10);
+	u8 fanmode;
+
+	if (val < 0 || val > 4)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
+	fanmode = ~(3 << FAN_CTRL_MODE(nr));
+
+	switch (val) {
+	case 0: /* Full speed */
+		fanmode  |= (3 << FAN_CTRL_MODE(nr));
+		data->pwm[nr] = 255;
+		f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+				data->pwm[nr]);
+		break;
+	case 1: /* PWM */
+		fanmode  |= (3 << FAN_CTRL_MODE(nr));
+		break;
+	case 2: /* AUTOMATIC*/
+		fanmode  |= (2 << FAN_CTRL_MODE(nr));
+		break;
+	case 3: /* fan speed */
+		break;
+	}
+	f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
+	data->pwm_enable[nr] = val;
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct f75375_data *data = i2c_get_clientdata(client);
+	int val = simple_strtoul(buf, NULL, 10);
+	u8 conf = 0;
+
+	if (val != 0 || val != 1 || data->kind == f75373)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	conf = f75375_read8(client, F75375_REG_CONFIG1);
+	conf = ~(1 << FAN_CTRL_LINEAR(nr));
+
+	if (val == 0)
+		conf |= (1 << FAN_CTRL_LINEAR(nr)) ;
+
+	f75375_write8(client, F75375_REG_CONFIG1, conf);
+	data->pwm_mode[nr] = val;
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute
+		*attr, char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct f75375_data *data = f75375_update_device(dev);
+	return sprintf(buf, "%d\n", data->pwm[nr]);
+}
+
+static ssize_t show_pwm_mode(struct device *dev, struct device_attribute
+		*attr, char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct f75375_data *data = f75375_update_device(dev);
+	return sprintf(buf, "%d\n", data->pwm_mode[nr]);
+}
+
+#define VOLT_FROM_REG(val) ((val) * 8)
+#define VOLT_TO_REG(val) ((val) / 8)
+
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct f75375_data *data = f75375_update_device(dev);
+	return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in[nr]));
+}
+
+static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct f75375_data *data = f75375_update_device(dev);
+	return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_max[nr]));
+}
+
+static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct f75375_data *data = f75375_update_device(dev);
+	return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_min[nr]));
+}
+
+static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct f75375_data *data = i2c_get_clientdata(client);
+	int val = simple_strtoul(buf, NULL, 10);
+	val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff);
+	mutex_lock(&data->update_lock);
+	data->in_max[nr] = val;
+	f75375_write8(client, F75375_REG_VOLT_HIGH(nr), data->in_max[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct f75375_data *data = i2c_get_clientdata(client);
+	int val = simple_strtoul(buf, NULL, 10);
+	val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff);
+	mutex_lock(&data->update_lock);
+	data->in_min[nr] = val;
+	f75375_write8(client, F75375_REG_VOLT_LOW(nr), data->in_min[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+#define TEMP_FROM_REG(val) ((val) * 1000)
+#define TEMP_TO_REG(val) ((val) / 1000)
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct f75375_data *data = f75375_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
+}
+
+static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct f75375_data *data = f75375_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr]));
+}
+
+static ssize_t show_temp_max_hyst(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct f75375_data *data = f75375_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[nr]));
+}
+
+static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct f75375_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127);
+	mutex_lock(&data->update_lock);
+	data->temp_high[nr] = val;
+	f75375_write8(client, F75375_REG_TEMP_HIGH(nr), data->temp_high[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_temp_max_hyst(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct f75375_data *data = i2c_get_clientdata(client);
+	int val = simple_strtol(buf, NULL, 10);
+	val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127);
+	mutex_lock(&data->update_lock);
+	data->temp_max_hyst[nr] = val;
+	f75375_write8(client, F75375_REG_TEMP_HYST(nr),
+		data->temp_max_hyst[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+#define show_fan(thing) \
+static ssize_t show_##thing(struct device *dev, struct device_attribute *attr, \
+			char *buf)\
+{\
+	int nr = to_sensor_dev_attr(attr)->index;\
+	struct f75375_data *data = f75375_update_device(dev); \
+	return sprintf(buf, "%d\n", rpm_from_reg(data->thing[nr])); \
+}
+
+show_fan(fan);
+show_fan(fan_min);
+show_fan(fan_full);
+show_fan(fan_exp);
+
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0);
+static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO|S_IWUSR,
+	show_in_max, set_in_max, 0);
+static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO|S_IWUSR,
+	show_in_min, set_in_min, 0);
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
+static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO|S_IWUSR,
+	show_in_max, set_in_max, 1);
+static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO|S_IWUSR,
+	show_in_min, set_in_min, 1);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2);
+static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO|S_IWUSR,
+	show_in_max, set_in_max, 2);
+static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO|S_IWUSR,
+	show_in_min, set_in_min, 2);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3);
+static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO|S_IWUSR,
+	show_in_max, set_in_max, 3);
+static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO|S_IWUSR,
+	show_in_min, set_in_min, 3);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR,
+	show_temp_max_hyst, set_temp_max_hyst, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO|S_IWUSR,
+	show_temp_max, set_temp_max, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR,
+	show_temp_max_hyst, set_temp_max_hyst, 1);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO|S_IWUSR,
+	show_temp_max, set_temp_max, 1);
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan1_full, S_IRUGO, show_fan_full, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO|S_IWUSR,
+	show_fan_min, set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan1_exp, S_IRUGO|S_IWUSR,
+	show_fan_exp, set_fan_exp, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan2_full, S_IRUGO, show_fan_full, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO|S_IWUSR,
+	show_fan_min, set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan2_exp, S_IRUGO|S_IWUSR,
+	show_fan_exp, set_fan_exp, 1);
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR,
+	show_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR,
+	show_pwm_enable, set_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO|S_IWUSR,
+	show_pwm_mode, set_pwm_mode, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR,
+	show_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR,
+	show_pwm_enable, set_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO|S_IWUSR,
+	show_pwm_mode, set_pwm_mode, 1);
+
+static struct attribute *f75375_attributes[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_full.dev_attr.attr,
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan1_exp.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_full.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_exp.dev_attr.attr,
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_mode.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_mode.dev_attr.attr,
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_max.dev_attr.attr,
+	&sensor_dev_attr_in0_min.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in3_max.dev_attr.attr,
+	&sensor_dev_attr_in3_min.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group f75375_group = {
+	.attrs = f75375_attributes,
+};
+
+static int f75375_detach_client(struct i2c_client *client)
+{
+	struct f75375_data *data = i2c_get_clientdata(client);
+	int err;
+
+	hwmon_device_unregister(data->class_dev);
+	sysfs_remove_group(&client->dev.kobj, &f75375_group);
+
+	err = i2c_detach_client(client);
+	if (err) {
+		dev_err(&client->dev,
+			"Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+	kfree(data);
+	return 0;
+}
+
+static int f75375_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_probe(adapter, &addr_data, f75375_detect);
+}
+
+/* This function is called by i2c_probe */
+static int f75375_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *client;
+	struct f75375_data *data;
+	u8 version = 0;
+	int err = 0;
+	const char *name = "";
+
+	if (!(data = kzalloc(sizeof(struct f75375_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	client = &data->client;
+	i2c_set_clientdata(client, data);
+	client->addr = address;
+	client->adapter = adapter;
+	client->driver = &f75375_driver;
+
+	if (kind < 0) {
+		u16 vendid = f75375_read16(client, F75375_REG_VENDOR);
+		u16 chipid = f75375_read16(client, F75375_CHIP_ID);
+		version = f75375_read8(client, F75375_REG_VERSION);
+		if (chipid == 0x0306 && vendid == 0x1934) {
+			kind = f75375;
+		} else if (chipid == 0x0204 && vendid == 0x1934) {
+			kind = f75373;
+		} else {
+			dev_err(&adapter->dev,
+				"failed,%02X,%02X,%02X\n",
+				chipid, version, vendid);
+			goto exit_free;
+		}
+	}
+
+	if (kind == f75375) {
+		name = "f75375";
+	} else if (kind == f75373) {
+		name = "f75373";
+	}
+
+	dev_info(&adapter->dev, "found %s version: %02X\n", name, version);
+	strlcpy(client->name, name, I2C_NAME_SIZE);
+	data->kind = kind;
+	mutex_init(&data->update_lock);
+	if ((err = i2c_attach_client(client)))
+		goto exit_free;
+
+	if ((err = sysfs_create_group(&client->dev.kobj, &f75375_group)))
+		goto exit_detach;
+
+	data->class_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->class_dev)) {
+		err = PTR_ERR(data->class_dev);
+		goto exit_remove;
+	}
+
+	return 0;
+
+exit_remove:
+	sysfs_remove_group(&client->dev.kobj, &f75375_group);
+exit_detach:
+	i2c_detach_client(client);
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int __init sensors_f75375_init(void)
+{
+	return i2c_add_driver(&f75375_driver);
+}
+
+static void __exit sensors_f75375_exit(void)
+{
+	i2c_del_driver(&f75375_driver);
+}
+
+MODULE_AUTHOR("Riku Voipio <riku.voipio@movial.fi>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("F75373/F75375 hardware monitoring driver");
+
+module_init(sensors_f75375_init);
+module_exit(sensors_f75375_exit);