diff options
author | Manu Abraham <abraham.manu@gmail.com> | 2007-10-15 12:08:20 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2008-12-29 17:53:18 -0200 |
commit | 6efb0ffe09bec45397142da8e1197885f562e7fa (patch) | |
tree | 542c19af62a50acc38a8a7ed8f1521f8b9f360a5 /drivers/media/dvb/ttpci | |
parent | 417dd69de843a2f67a9ff6e21df7de5be5dd8204 (diff) |
V4L/DVB (9421): We must wait for the PLL to stabilize
Thanks to Peter for the in depth explanation
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/dvb/ttpci')
-rw-r--r-- | drivers/media/dvb/ttpci/budget-ci.c | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index 6b77b123f75..21f5e2c6b4c 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -1768,6 +1768,29 @@ static void frontend_init(struct budget_ci *budget_ci) break; case 0x1019: // TT S2-3200 PCI + /* + * NOTE! on some STB0899 versions, the internal PLL takes a longer time + * to settle, aka LOCK. On the older revisions of the chip, we don't see + * this, as a result on the newer chips the entire clock tree, will not + * be stable after a freshly POWER 'ed up situation. + * In this case, we should RESET the STB0899 (Active LOW) and wait for + * PLL stabilization. + * + * On the TT S2 3200 and clones, the STB0899 demodulator's RESETB is + * connected to the SAA7146 GPIO, GPIO2, Pin 142 + */ + /* Reset Demodulator */ + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); + /* Wait for everything to die */ + msleep(50); + /* Pull it up out of Reset state */ + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); + /* Wait for PLL to stabilize */ + msleep(250); + /* + * PLL state should be stable now. Ideally, we should check + * for PLL LOCK status. But well, never mind! + */ budget_ci->budget.dvb_frontend = dvb_attach(stb0899_attach, &tt3200_config, &budget_ci->budget.i2c_adap); if (budget_ci->budget.dvb_frontend) { if (dvb_attach(stb6100_attach, budget_ci->budget.dvb_frontend, &tt3200_stb6100_config, &budget_ci->budget.i2c_adap)) { |