com20020_cs: Move the PCMCIA Arcnet driver

Move the COM20020 PCMICA Arcnet driver into drivers/net/arcnet/ with
the other Arcnet drivers.  Made the necessary Kconfig and Makefile
changes as well.

Since this was the "last" PCMCIA driver in drivers/net/pcmcia/, this patch
also cleans up the references to drivers/net/pcmcia.

CC: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

3 files changed, 0 insertions, 389 deletions

diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
deleted file mode 100644
index ff4deb0ace4..00000000000
--- a/drivers/net/pcmcia/Kconfig
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# PCMCIA Network device configuration
-#
-
-menuconfig NET_PCMCIA
-	bool "PCMCIA network device support"
-	depends on PCMCIA
-	---help---
-	  Say Y if you would like to include support for any PCMCIA or CardBus
-	  network adapters, then say Y to the driver for your particular card
-	  below.  PCMCIA- or PC-cards are credit-card size devices often used
-	  with laptops computers; CardBus is the newer and faster version of
-	  PCMCIA.
-
-	  To use your PC-cards, you will need supporting software from David
-	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-	  for location).  You also want to check out the PCMCIA-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  If unsure, say N.
-
-if NET_PCMCIA && PCMCIA
-
-config ARCNET_COM20020_CS
-	tristate "COM20020 ARCnet PCMCIA support"
-	depends on ARCNET_COM20020
-	help
-	  Say Y here if you intend to attach this type of ARCnet PCMCIA card
-	  to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called com20020_cs.  If unsure, say N.
-
-endif # NET_PCMCIA
diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile
deleted file mode 100644
index b98a0a4753f..00000000000
--- a/drivers/net/pcmcia/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the Linux PCMCIA network device drivers.
-#
-
-# 16-bit client drivers
-obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
deleted file mode 100644
index 980e65c1493..00000000000
--- a/drivers/net/pcmcia/com20020_cs.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- * Linux ARCnet driver - COM20020 PCMCIA support
- * 
- * Written 1994-1999 by Avery Pennarun,
- *    based on an ISA version by David Woodhouse.
- * Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4)
- *    which was derived from pcnet_cs.c by David Hinds.
- * Some additional portions derived from skeleton.c by Donald Becker.
- *
- * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
- *  for sponsoring the further development of this driver.
- *
- * **********************
- *
- * The original copyright of skeleton.c was as follows:
- *
- * skeleton.c Written 1993 by Donald Becker.
- * Copyright 1993 United States Government as represented by the
- * Director, National Security Agency.  This software may only be used
- * and distributed according to the terms of the GNU General Public License as
- * modified by SRC, incorporated herein by reference.
- * 
- * **********************
- * Changes:
- * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000
- * - reorganize kmallocs in com20020_attach, checking all for failure
- *   and releasing the previous allocations if one fails
- * **********************
- * 
- * For more details, see drivers/net/arcnet.c
- *
- * **********************
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/arcdevice.h>
-#include <linux/com20020.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ds.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-
-#define VERSION "arcnet: COM20020 PCMCIA support loaded.\n"
-
-
-static void regdump(struct net_device *dev)
-{
-#ifdef DEBUG
-    int ioaddr = dev->base_addr;
-    int count;
-    
-    netdev_dbg(dev, "register dump:\n");
-    for (count = ioaddr; count < ioaddr + 16; count++)
-    {
-	if (!(count % 16))
-	    pr_cont("%04X:", count);
-	pr_cont(" %02X", inb(count));
-    }
-    pr_cont("\n");
-    
-    netdev_dbg(dev, "buffer0 dump:\n");
-	/* set up the address register */
-        count = 0;
-	outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
-	outb(count & 0xff, _ADDR_LO);
-    
-    for (count = 0; count < 256+32; count++)
-    {
-	if (!(count % 16))
-	    pr_cont("%04X:", count);
-	
-	/* copy the data */
-	pr_cont(" %02X", inb(_MEMDATA));
-    }
-    pr_cont("\n");
-#endif
-}
-
-
-
-/*====================================================================*/
-
-/* Parameters that can be set with 'insmod' */
-
-static int node;
-static int timeout = 3;
-static int backplane;
-static int clockp;
-static int clockm;
-
-module_param(node, int, 0);
-module_param(timeout, int, 0);
-module_param(backplane, int, 0);
-module_param(clockp, int, 0);
-module_param(clockm, int, 0);
-
-MODULE_LICENSE("GPL");
-
-/*====================================================================*/
-
-static int com20020_config(struct pcmcia_device *link);
-static void com20020_release(struct pcmcia_device *link);
-
-static void com20020_detach(struct pcmcia_device *p_dev);
-
-/*====================================================================*/
-
-typedef struct com20020_dev_t {
-    struct net_device       *dev;
-} com20020_dev_t;
-
-static int com20020_probe(struct pcmcia_device *p_dev)
-{
-    com20020_dev_t *info;
-    struct net_device *dev;
-    struct arcnet_local *lp;
-
-    dev_dbg(&p_dev->dev, "com20020_attach()\n");
-
-    /* Create new network device */
-    info = kzalloc(sizeof(struct com20020_dev_t), GFP_KERNEL);
-    if (!info)
-	goto fail_alloc_info;
-
-    dev = alloc_arcdev("");
-    if (!dev)
-	goto fail_alloc_dev;
-
-    lp = netdev_priv(dev);
-    lp->timeout = timeout;
-    lp->backplane = backplane;
-    lp->clockp = clockp;
-    lp->clockm = clockm & 3;
-    lp->hw.owner = THIS_MODULE;
-
-    /* fill in our module parameters as defaults */
-    dev->dev_addr[0] = node;
-
-    p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-    p_dev->resource[0]->end = 16;
-    p_dev->config_flags |= CONF_ENABLE_IRQ;
-
-    info->dev = dev;
-    p_dev->priv = info;
-
-    return com20020_config(p_dev);
-
-fail_alloc_dev:
-    kfree(info);
-fail_alloc_info:
-    return -ENOMEM;
-} /* com20020_attach */
-
-static void com20020_detach(struct pcmcia_device *link)
-{
-    struct com20020_dev_t *info = link->priv;
-    struct net_device *dev = info->dev;
-
-    dev_dbg(&link->dev, "detach...\n");
-
-    dev_dbg(&link->dev, "com20020_detach\n");
-
-    dev_dbg(&link->dev, "unregister...\n");
-
-    unregister_netdev(dev);
-
-    /*
-     * this is necessary because we register our IRQ separately
-     * from card services.
-     */
-    if (dev->irq)
-	    free_irq(dev->irq, dev);
-
-    com20020_release(link);
-
-    /* Unlink device structure, free bits */
-    dev_dbg(&link->dev, "unlinking...\n");
-    if (link->priv)
-    {
-	dev = info->dev;
-	if (dev)
-	{
-	    dev_dbg(&link->dev, "kfree...\n");
-	    free_netdev(dev);
-	}
-	dev_dbg(&link->dev, "kfree2...\n");
-	kfree(info);
-    }
-
-} /* com20020_detach */
-
-static int com20020_config(struct pcmcia_device *link)
-{
-    struct arcnet_local *lp;
-    com20020_dev_t *info;
-    struct net_device *dev;
-    int i, ret;
-    int ioaddr;
-
-    info = link->priv;
-    dev = info->dev;
-
-    dev_dbg(&link->dev, "config...\n");
-
-    dev_dbg(&link->dev, "com20020_config\n");
-
-    dev_dbg(&link->dev, "baseport1 is %Xh\n",
-	    (unsigned int) link->resource[0]->start);
-
-    i = -ENODEV;
-    link->io_lines = 16;
-
-    if (!link->resource[0]->start)
-    {
-	for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
-	{
-	    link->resource[0]->start = ioaddr;
-	    i = pcmcia_request_io(link);
-	    if (i == 0)
-		break;
-	}
-    }
-    else
-	i = pcmcia_request_io(link);
-    
-    if (i != 0)
-    {
-	dev_dbg(&link->dev, "requestIO failed totally!\n");
-	goto failed;
-    }
-	
-    ioaddr = dev->base_addr = link->resource[0]->start;
-    dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
-
-    dev_dbg(&link->dev, "request IRQ %d\n",
-	    link->irq);
-    if (!link->irq)
-    {
-	dev_dbg(&link->dev, "requestIRQ failed totally!\n");
-	goto failed;
-    }
-
-    dev->irq = link->irq;
-
-    ret = pcmcia_enable_device(link);
-    if (ret)
-	    goto failed;
-
-    if (com20020_check(dev))
-    {
-	regdump(dev);
-	goto failed;
-    }
-    
-    lp = netdev_priv(dev);
-    lp->card_name = "PCMCIA COM20020";
-    lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
-
-    SET_NETDEV_DEV(dev, &link->dev);
-
-    i = com20020_found(dev, 0);	/* calls register_netdev */
-    
-    if (i != 0) {
-	dev_notice(&link->dev,
-		   "com20020_found() failed\n");
-	goto failed;
-    }
-
-    netdev_dbg(dev, "port %#3lx, irq %d\n",
-	       dev->base_addr, dev->irq);
-    return 0;
-
-failed:
-    dev_dbg(&link->dev, "com20020_config failed...\n");
-    com20020_release(link);
-    return -ENODEV;
-} /* com20020_config */
-
-static void com20020_release(struct pcmcia_device *link)
-{
-	dev_dbg(&link->dev, "com20020_release\n");
-	pcmcia_disable_device(link);
-}
-
-static int com20020_suspend(struct pcmcia_device *link)
-{
-	com20020_dev_t *info = link->priv;
-	struct net_device *dev = info->dev;
-
-	if (link->open)
-		netif_device_detach(dev);
-
-	return 0;
-}
-
-static int com20020_resume(struct pcmcia_device *link)
-{
-	com20020_dev_t *info = link->priv;
-	struct net_device *dev = info->dev;
-
-	if (link->open) {
-		int ioaddr = dev->base_addr;
-		struct arcnet_local *lp = netdev_priv(dev);
-		ARCRESET;
-	}
-
-	return 0;
-}
-
-static const struct pcmcia_device_id com20020_ids[] = {
-	PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.",
-			"PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
-	PCMCIA_DEVICE_PROD_ID12("SoHard AG",
-			"SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
-	PCMCIA_DEVICE_NULL
-};
-MODULE_DEVICE_TABLE(pcmcia, com20020_ids);
-
-static struct pcmcia_driver com20020_cs_driver = {
-	.owner		= THIS_MODULE,
-	.name		= "com20020_cs",
-	.probe		= com20020_probe,
-	.remove		= com20020_detach,
-	.id_table	= com20020_ids,
-	.suspend	= com20020_suspend,
-	.resume		= com20020_resume,
-};
-
-static int __init init_com20020_cs(void)
-{
-	return pcmcia_register_driver(&com20020_cs_driver);
-}
-
-static void __exit exit_com20020_cs(void)
-{
-	pcmcia_unregister_driver(&com20020_cs_driver);
-}
-
-module_init(init_com20020_cs);
-module_exit(exit_com20020_cs);