diff options
author | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-04-02 06:20:12 -0700 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-08-10 19:54:25 -0700 |
commit | 644570b830266ff33ff5f3542b9c838f93a55ea6 (patch) | |
tree | b19c680ce1b1e4cd15465c74aa335459068c033f /drivers/net/pcmcia | |
parent | b955f6ca776f3bab3d1e2c5fb1d247b203cbda14 (diff) |
8390: Move the 8390 related drivers
Moves the drivers for the National Semi-conductor 8390 chipset into
drivers/net/ethernet/8390/ and the necessary Kconfig and Makefile
changes.
CC: Donald Becker <becker@scyld.com>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Alain Malek <alain.malek@cryogen.com>
CC: Peter De Schrijver <p2@mind.be>
CC: "David Huggins-Daines" <dhd@debian.org>
CC: Wim Dumon <wimpie@kotnet.org>
CC: Yoshinori Sato <ysato@users.sourceforge.jp>
CC: David Hinds <dahinds@users.sourceforge.net>
CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/pcmcia')
-rw-r--r-- | drivers/net/pcmcia/Kconfig | 21 | ||||
-rw-r--r-- | drivers/net/pcmcia/Makefile | 2 | ||||
-rw-r--r-- | drivers/net/pcmcia/axnet_cs.c | 1725 | ||||
-rw-r--r-- | drivers/net/pcmcia/pcnet_cs.c | 1710 |
4 files changed, 0 insertions, 3458 deletions
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig index e17ad95f666..72aa25786a9 100644 --- a/drivers/net/pcmcia/Kconfig +++ b/drivers/net/pcmcia/Kconfig @@ -31,16 +31,6 @@ config PCMCIA_FMVJ18X To compile this driver as a module, choose M here: the module will be called fmvj18x_cs. If unsure, say N. -config PCMCIA_PCNET - tristate "NE2000 compatible PCMCIA support" - select CRC32 - help - Say Y here if you intend to attach an NE2000 compatible PCMCIA - (PC-card) Ethernet or Fast Ethernet card to your computer. - - To compile this driver as a module, choose M here: the module will be - called pcnet_cs. If unsure, say N. - config PCMCIA_SMC91C92 tristate "SMC 91Cxx PCMCIA support" select CRC32 @@ -61,17 +51,6 @@ config PCMCIA_XIRC2PS To compile this driver as a module, choose M here: the module will be called xirc2ps_cs. If unsure, say N. -config PCMCIA_AXNET - tristate "Asix AX88190 PCMCIA support" - ---help--- - Say Y here if you intend to attach an Asix AX88190-based PCMCIA - (PC-card) Fast Ethernet card to your computer. These cards are - nearly NE2000 compatible but need a separate driver due to a few - misfeatures. - - To compile this driver as a module, choose M here: the module will be - called axnet_cs. If unsure, say N. - config ARCNET_COM20020_CS tristate "COM20020 ARCnet PCMCIA support" depends on ARCNET_COM20020 diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile index 985f0ae37f8..c2b8b44c7bb 100644 --- a/drivers/net/pcmcia/Makefile +++ b/drivers/net/pcmcia/Makefile @@ -4,10 +4,8 @@ # 16-bit client drivers obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o -obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o -obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o obj-$(CONFIG_PCMCIA_IBMTR) += ibmtr_cs.o diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c deleted file mode 100644 index 9953db71196..00000000000 --- a/drivers/net/pcmcia/axnet_cs.c +++ /dev/null @@ -1,1725 +0,0 @@ -/*====================================================================== - - A PCMCIA ethernet driver for Asix AX88190-based cards - - The Asix AX88190 is a NS8390-derived chipset with a few nasty - idiosyncracies that make it very inconvenient to support with a - standard 8390 driver. This driver is based on pcnet_cs, with the - tweaked 8390 code grafted on the end. Much of what I did was to - clean up and update a similar driver supplied by Asix, which was - adapted by William Lee, william@asix.com.tw. - - Copyright (C) 2001 David A. Hinds -- dahinds@users.sourceforge.net - - axnet_cs.c 1.28 2002/06/29 06:27:37 - - The network driver code is based on Donald Becker's NE2000 code: - - Written 1992,1993 by Donald Becker. - Copyright 1993 United States Government as represented by the - Director, National Security Agency. This software may be used and - distributed according to the terms of the GNU General Public License, - incorporated herein by reference. - Donald Becker may be reached at becker@scyld.com - -======================================================================*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/ptrace.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/crc32.h> -#include <linux/mii.h> -#include "../8390.h" - -#include <pcmcia/cistpl.h> -#include <pcmcia/ciscode.h> -#include <pcmcia/ds.h> -#include <pcmcia/cisreg.h> - -#include <asm/io.h> -#include <asm/system.h> -#include <asm/byteorder.h> -#include <asm/uaccess.h> - -#define AXNET_CMD 0x00 -#define AXNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */ -#define AXNET_RESET 0x1f /* Issue a read to reset, a write to clear. */ -#define AXNET_MII_EEP 0x14 /* Offset of MII access port */ -#define AXNET_TEST 0x15 /* Offset of TEST Register port */ -#define AXNET_GPIO 0x17 /* Offset of General Purpose Register Port */ - -#define AXNET_START_PG 0x40 /* First page of TX buffer */ -#define AXNET_STOP_PG 0x80 /* Last page +1 of RX ring */ - -#define AXNET_RDC_TIMEOUT 0x02 /* Max wait in jiffies for Tx RDC */ - -#define IS_AX88190 0x0001 -#define IS_AX88790 0x0002 - -/*====================================================================*/ - -/* Module parameters */ - -MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); -MODULE_DESCRIPTION("Asix AX88190 PCMCIA ethernet driver"); -MODULE_LICENSE("GPL"); - - -/*====================================================================*/ - -static int axnet_config(struct pcmcia_device *link); -static void axnet_release(struct pcmcia_device *link); -static int axnet_open(struct net_device *dev); -static int axnet_close(struct net_device *dev); -static int axnet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static netdev_tx_t axnet_start_xmit(struct sk_buff *skb, - struct net_device *dev); -static struct net_device_stats *get_stats(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); -static void axnet_tx_timeout(struct net_device *dev); -static irqreturn_t ei_irq_wrapper(int irq, void *dev_id); -static void ei_watchdog(u_long arg); -static void axnet_reset_8390(struct net_device *dev); - -static int mdio_read(unsigned int addr, int phy_id, int loc); -static void mdio_write(unsigned int addr, int phy_id, int loc, int value); - -static void get_8390_hdr(struct net_device *, - struct e8390_pkt_hdr *, int); -static void block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void block_output(struct net_device *dev, int count, - const u_char *buf, const int start_page); - -static void axnet_detach(struct pcmcia_device *p_dev); - -static void AX88190_init(struct net_device *dev, int startp); -static int ax_open(struct net_device *dev); -static int ax_close(struct net_device *dev); -static irqreturn_t ax_interrupt(int irq, void *dev_id); - -/*====================================================================*/ - -typedef struct axnet_dev_t { - struct pcmcia_device *p_dev; - caddr_t base; - struct timer_list watchdog; - int stale, fast_poll; - u_short link_status; - u_char duplex_flag; - int phy_id; - int flags; - int active_low; -} axnet_dev_t; - -static inline axnet_dev_t *PRIV(struct net_device *dev) -{ - void *p = (char *)netdev_priv(dev) + sizeof(struct ei_device); - return p; -} - -static const struct net_device_ops axnet_netdev_ops = { - .ndo_open = axnet_open, - .ndo_stop = axnet_close, - .ndo_do_ioctl = axnet_ioctl, - .ndo_start_xmit = axnet_start_xmit, - .ndo_tx_timeout = axnet_tx_timeout, - .ndo_get_stats = get_stats, - .ndo_set_multicast_list = set_multicast_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int axnet_probe(struct pcmcia_device *link) -{ - axnet_dev_t *info; - struct net_device *dev; - struct ei_device *ei_local; - - dev_dbg(&link->dev, "axnet_attach()\n"); - - dev = alloc_etherdev(sizeof(struct ei_device) + sizeof(axnet_dev_t)); - if (!dev) - return -ENOMEM; - - ei_local = netdev_priv(dev); - spin_lock_init(&ei_local->page_lock); - - info = PRIV(dev); - info->p_dev = link; - link->priv = dev; - link->config_flags |= CONF_ENABLE_IRQ; - - dev->netdev_ops = &axnet_netdev_ops; - - dev->watchdog_timeo = TX_TIMEOUT; - - return axnet_config(link); -} /* axnet_attach */ - -static void axnet_detach(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - - dev_dbg(&link->dev, "axnet_detach(0x%p)\n", link); - - unregister_netdev(dev); - - axnet_release(link); - - free_netdev(dev); -} /* axnet_detach */ - -/*====================================================================== - - This probes for a card's hardware address by reading the PROM. - -======================================================================*/ - -static int get_prom(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - unsigned int ioaddr = dev->base_addr; - int i, j; - - /* This is based on drivers/net/ne.c */ - struct { - u_char value, offset; - } program_seq[] = { - {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/ - {0x01, EN0_DCFG}, /* Set word-wide access. */ - {0x00, EN0_RCNTLO}, /* Clear the count regs. */ - {0x00, EN0_RCNTHI}, - {0x00, EN0_IMR}, /* Mask completion irq. */ - {0xFF, EN0_ISR}, - {E8390_RXOFF|0x40, EN0_RXCR}, /* 0x60 Set to monitor */ - {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */ - {0x10, EN0_RCNTLO}, - {0x00, EN0_RCNTHI}, - {0x00, EN0_RSARLO}, /* DMA starting at 0x0400. */ - {0x04, EN0_RSARHI}, - {E8390_RREAD+E8390_START, E8390_CMD}, - }; - - /* Not much of a test, but the alternatives are messy */ - if (link->config_base != 0x03c0) - return 0; - - axnet_reset_8390(dev); - mdelay(10); - - for (i = 0; i < ARRAY_SIZE(program_seq); i++) - outb_p(program_seq[i].value, ioaddr + program_seq[i].offset); - - for (i = 0; i < 6; i += 2) { - j = inw(ioaddr + AXNET_DATAPORT); - dev->dev_addr[i] = j & 0xff; - dev->dev_addr[i+1] = j >> 8; - } - return 1; -} /* get_prom */ - -static int try_io_port(struct pcmcia_device *link) -{ - int j, ret; - link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; - if (link->resource[0]->end == 32) { - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - /* for master/slave multifunction cards */ - if (link->resource[1]->end > 0) - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - } else { - /* This should be two 16-port windows */ - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; - } - if (link->resource[0]->start == 0) { - for (j = 0; j < 0x400; j += 0x20) { - link->resource[0]->start = j ^ 0x300; - link->resource[1]->start = (j ^ 0x300) + 0x10; - link->io_lines = 16; - ret = pcmcia_request_io(link); - if (ret == 0) - return ret; - } - return ret; - } else { - return pcmcia_request_io(link); - } -} - -static int axnet_configcheck(struct pcmcia_device *p_dev, void *priv_data) -{ - if (p_dev->config_index == 0) - return -EINVAL; - - p_dev->config_index = 0x05; - if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) - return -ENODEV; - - return try_io_port(p_dev); -} - -static int axnet_config(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - axnet_dev_t *info = PRIV(dev); - int i, j, j2, ret; - - dev_dbg(&link->dev, "axnet_config(0x%p)\n", link); - - /* don't trust the CIS on this; Linksys got it wrong */ - link->config_regs = 0x63; - link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; - ret = pcmcia_loop_config(link, axnet_configcheck, NULL); - if (ret != 0) - goto failed; - - if (!link->irq) - goto failed; - - if (resource_size(link->resource[1]) == 8) - link->config_flags |= CONF_ENABLE_SPKR; - - ret = pcmcia_enable_device(link); - if (ret) - goto failed; - - dev->irq = link->irq; - dev->base_addr = link->resource[0]->start; - - if (!get_prom(link)) { - pr_notice("this is not an AX88190 card!\n"); - pr_notice("use pcnet_cs instead.\n"); - goto failed; - } - - ei_status.name = "AX88190"; - ei_status.word16 = 1; - ei_status.tx_start_page = AXNET_START_PG; - ei_status.rx_start_page = AXNET_START_PG + TX_PAGES; - ei_status.stop_page = AXNET_STOP_PG; - ei_status.reset_8390 = axnet_reset_8390; - ei_status.get_8390_hdr = get_8390_hdr; - ei_status.block_input = block_input; - ei_status.block_output = block_output; - - if (inb(dev->base_addr + AXNET_TEST) != 0) - info->flags |= IS_AX88790; - else - info->flags |= IS_AX88190; - - if (info->flags & IS_AX88790) - outb(0x10, dev->base_addr + AXNET_GPIO); /* select Internal PHY */ - - info->active_low = 0; - - for (i = 0; i < 32; i++) { - j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1); - j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2); - if (j == j2) continue; - if ((j != 0) && (j != 0xffff)) break; - } - - if (i == 32) { - /* Maybe PHY is in power down mode. (PPD_SET = 1) - Bit 2 of CCSR is active low. */ - pcmcia_write_config_byte(link, CISREG_CCSR, 0x04); - for (i = 0; i < 32; i++) { - j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1); - j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2); - if (j == j2) continue; - if ((j != 0) && (j != 0xffff)) { - info->active_low = 1; - break; - } - } - } - - info->phy_id = (i < 32) ? i : -1; - SET_NETDEV_DEV(dev, &link->dev); - - if (register_netdev(dev) != 0) { - pr_notice("register_netdev() failed\n"); - goto failed; - } - - netdev_info(dev, "Asix AX88%d90: io %#3lx, irq %d, hw_addr %pM\n", - ((info->flags & IS_AX88790) ? 7 : 1), - dev->base_addr, dev->irq, dev->dev_addr); - if (info->phy_id != -1) { - netdev_dbg(dev, " MII transceiver at index %d, status %x\n", - info->phy_id, j); - } else { - netdev_notice(dev, " No MII transceivers found!\n"); - } - return 0; - -failed: - axnet_release(link); - return -ENODEV; -} /* axnet_config */ - -static void axnet_release(struct pcmcia_device *link) -{ - pcmcia_disable_device(link); -} - -static int axnet_suspend(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - - if (link->open) - netif_device_detach(dev); - - return 0; -} - -static int axnet_resume(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - axnet_dev_t *info = PRIV(dev); - - if (link->open) { - if (info->active_low == 1) - pcmcia_write_config_byte(link, CISREG_CCSR, 0x04); - - axnet_reset_8390(dev); - AX88190_init(dev, 1); - netif_device_attach(dev); - } - - return 0; -} - - -/*====================================================================== - - MII interface support - -======================================================================*/ - -#define MDIO_SHIFT_CLK 0x01 -#define MDIO_DATA_WRITE0 0x00 -#define MDIO_DATA_WRITE1 0x08 -#define MDIO_DATA_READ 0x04 -#define MDIO_MASK 0x0f -#define MDIO_ENB_IN 0x02 - -static void mdio_sync(unsigned int addr) -{ - int bits; - for (bits = 0; bits < 32; bits++) { - outb_p(MDIO_DATA_WRITE1, addr); - outb_p(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr); - } -} - -static int mdio_read(unsigned int addr, int phy_id, int loc) -{ - u_int cmd = (0xf6<<10)|(phy_id<<5)|loc; - int i, retval = 0; - - mdio_sync(addr); - for (i = 14; i >= 0; i--) { - int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; - outb_p(dat, addr); - outb_p(dat | MDIO_SHIFT_CLK, addr); - } - for (i = 19; i > 0; i--) { - outb_p(MDIO_ENB_IN, addr); - retval = (retval << 1) | ((inb_p(addr) & MDIO_DATA_READ) != 0); - outb_p(MDIO_ENB_IN | MDIO_SHIFT_CLK, addr); - } - return (retval>>1) & 0xffff; -} - -static void mdio_write(unsigned int addr, int phy_id, int loc, int value) -{ - u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value; - int i; - - mdio_sync(addr); - for (i = 31; i >= 0; i--) { - int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; - outb_p(dat, addr); - outb_p(dat | MDIO_SHIFT_CLK, addr); - } - for (i = 1; i >= 0; i--) { - outb_p(MDIO_ENB_IN, addr); - outb_p(MDIO_ENB_IN | MDIO_SHIFT_CLK, addr); - } -} - -/*====================================================================*/ - -static int axnet_open(struct net_device *dev) -{ - int ret; - axnet_dev_t *info = PRIV(dev); - struct pcmcia_device *link = info->p_dev; - unsigned int nic_base = dev->base_addr; - - dev_dbg(&link->dev, "axnet_open('%s')\n", dev->name); - - if (!pcmcia_dev_present(link)) - return -ENODEV; - - outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */ - ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, "axnet_cs", dev); - if (ret) - return ret; - - link->open++; - - info->link_status = 0x00; - init_timer(&info->watchdog); - info->watchdog.function = ei_watchdog; - info->watchdog.data = (u_long)dev; - info->watchdog.expires = jiffies + HZ; - add_timer(&info->watchdog); - - return ax_open(dev); -} /* axnet_open */ - -/*====================================================================*/ - -static int axnet_close(struct net_device *dev) -{ - axnet_dev_t *info = PRIV(dev); - struct pcmcia_device *link = info->p_dev; - - dev_dbg(&link->dev, "axnet_close('%s')\n", dev->name); - - ax_close(dev); - free_irq(dev->irq, dev); - - link->open--; - netif_stop_queue(dev); - del_timer_sync(&info->watchdog); - - return 0; -} /* axnet_close */ - -/*====================================================================== - - Hard reset the card. This used to pause for the same period that - a 8390 reset command required, but that shouldn't be necessary. - -======================================================================*/ - -static void axnet_reset_8390(struct net_device *dev) -{ - unsigned int nic_base = dev->base_addr; - int i; - - ei_status.txing = ei_status.dmaing = 0; - - outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, nic_base + E8390_CMD); - - outb(inb(nic_base + AXNET_RESET), nic_base + AXNET_RESET); - - for (i = 0; i < 100; i++) { - if ((inb_p(nic_base+EN0_ISR) & ENISR_RESET) != 0) - break; - udelay(100); - } - outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */ - - if (i == 100) - netdev_err(dev, "axnet_reset_8390() did not complete\n"); - -} /* axnet_reset_8390 */ - -/*====================================================================*/ - -static irqreturn_t ei_irq_wrapper(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - PRIV(dev)->stale = 0; - return ax_interrupt(irq, dev_id); -} - -static void ei_watchdog(u_long arg) -{ - struct net_device *dev = (struct net_device *)(arg); - axnet_dev_t *info = PRIV(dev); - unsigned int nic_base = dev->base_addr; - unsigned int mii_addr = nic_base + AXNET_MII_EEP; - u_short link; - - if (!netif_device_present(dev)) goto reschedule; - - /* Check for pending interrupt with expired latency timer: with - this, we can limp along even if the interrupt is blocked */ - if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) { - if (!info->fast_poll) - netdev_info(dev, "interrupt(s) dropped!\n"); - ei_irq_wrapper(dev->irq, dev); - info->fast_poll = HZ; - } - if (info->fast_poll) { - info->fast_poll--; - info->watchdog.expires = jiffies + 1; - add_timer(&info->watchdog); - return; - } - - if (info->phy_id < 0) - goto reschedule; - link = mdio_read(mii_addr, info->phy_id, 1); - if (!link || (link == 0xffff)) { - netdev_info(dev, "MII is missing!\n"); - info->phy_id = -1; - goto reschedule; - } - - link &= 0x0004; - if (link != info->link_status) { - u_short p = mdio_read(mii_addr, info->phy_id, 5); - netdev_info(dev, "%s link beat\n", link ? "found" : "lost"); - if (link) { - info->duplex_flag = (p & 0x0140) ? 0x80 : 0x00; - if (p) - netdev_info(dev, "autonegotiation complete: %dbaseT-%cD selected\n", - (p & 0x0180) ? 100 : 10, (p & 0x0140) ? 'F' : 'H'); - else - netdev_info(dev, "link partner did not autonegotiate\n"); - AX88190_init(dev, 1); - } - info->link_status = link; - } - -reschedule: - info->watchdog.expires = jiffies + HZ; - add_timer(&info->watchdog); -} - -/*====================================================================*/ - -static int axnet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - axnet_dev_t *info = PRIV(dev); - struct mii_ioctl_data *data = if_mii(rq); - unsigned int mii_addr = dev->base_addr + AXNET_MII_EEP; - switch (cmd) { - case SIOCGMIIPHY: - data->phy_id = info->phy_id; - case SIOCGMIIREG: /* Read MII PHY register. */ - data->val_out = mdio_read(mii_addr, data->phy_id, data->reg_num & 0x1f); - return 0; - case SIOCSMIIREG: /* Write MII PHY register. */ - mdio_write(mii_addr, data->phy_id, data->reg_num & 0x1f, data->val_in); - return 0; - } - return -EOPNOTSUPP; -} - -/*====================================================================*/ - -static void get_8390_hdr(struct net_device *dev, - struct e8390_pkt_hdr *hdr, - int ring_page) -{ - unsigned int nic_base = dev->base_addr; - - outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */ - outb_p(ring_page, nic_base + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, nic_base + AXNET_CMD); - - insw(nic_base + AXNET_DATAPORT, hdr, - sizeof(struct e8390_pkt_hdr)>>1); - /* Fix for big endian systems */ - hdr->count = le16_to_cpu(hdr->count); - -} - -/*====================================================================*/ - -static void block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset) -{ - unsigned int nic_base = dev->base_addr; - int xfer_count = count; - char *buf = skb->data; - - if ((ei_debug > 4) && (count != 4)) - pr_debug("%s: [bi=%d]\n", dev->name, count+4); - outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); - outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, nic_base + AXNET_CMD); - - insw(nic_base + AXNET_DATAPORT,buf,count>>1); - if (count & 0x01) - buf[count-1] = inb(nic_base + AXNET_DATAPORT), xfer_count++; - -} - -/*====================================================================*/ - -static void block_output(struct net_device *dev, int count, - const u_char *buf, const int start_page) -{ - unsigned int nic_base = dev->base_addr; - - pr_debug("%s: [bo=%d]\n", dev->name, count); - - /* Round the count up for word writes. Do we need to do this? - What effect will an odd byte count have on the 8390? - I should check someday. */ - if (count & 0x01) - count++; - - outb_p(0x00, nic_base + EN0_RSARLO); - outb_p(start_page, nic_base + EN0_RSARHI); - outb_p(E8390_RWRITE+E8390_START, nic_base + AXNET_CMD); - outsw(nic_base + AXNET_DATAPORT, buf, count>>1); -} - -static const struct pcmcia_device_id axnet_ids[] = { - PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x016c, 0x0081), - PCMCIA_DEVICE_MANF_CARD(0x018a, 0x0301), - PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328), - PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0301), - PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0303), - PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0309), - PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1106), - PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab), - PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202), - PCMCIA_DEVICE_MANF_CARD(0xffff, 0x1090), - PCMCIA_DEVICE_PROD_ID12("AmbiCom,Inc.", "Fast Ethernet PC Card(AMB8110)", 0x49b020a7, 0x119cc9fc), - PCMCIA_DEVICE_PROD_ID124("Fast Ethernet", "16-bit PC Card", "AX88190", 0xb4be14e3, 0x9a12eb6a, 0xab9be5ef), - PCMCIA_DEVICE_PROD_ID12("ASIX", "AX88190", 0x0959823b, 0xab9be5ef), - PCMCIA_DEVICE_PROD_ID12("Billionton", "LNA-100B", 0x552ab682, 0xbc3b87e1), - PCMCIA_DEVICE_PROD_ID12("CHEETAH ETHERCARD", "EN2228", 0x00fa7bc8, 0x00e990cc), - PCMCIA_DEVICE_PROD_ID12("CNet", "CNF301", 0xbc477dde, 0x78c5f40b), - PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEther PCC-TXD", 0x5261440f, 0x436768c5), - PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEtherII PCC-TXD", 0x5261440f, 0x730df72e), - PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEther PCC-TXM", 0x5261440f, 0x3abbd061), - PCMCIA_DEVICE_PROD_ID12("Dynalink", "L100C16", 0x55632fd5, 0x66bc2a90), - PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2), - PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8), - PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609), - PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEtherCard", 0x281f1c5d, 0x7ef26116), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FEP501", 0x281f1c5d, 0x2e272058), - PCMCIA_DEVICE_PROD_ID14("Network Everywhere", "AX88190", 0x820a67b6, 0xab9be5ef), - PCMCIA_DEVICE_NULL, -}; -MODULE_DEVICE_TABLE(pcmcia, axnet_ids); - -static struct pcmcia_driver axnet_cs_driver = { - .owner = THIS_MODULE, - .name = "axnet_cs", - .probe = axnet_probe, - .remove = axnet_detach, - .id_table = axnet_ids, - .suspend = axnet_suspend, - .resume = axnet_resume, -}; - -static int __init init_axnet_cs(void) -{ - return pcmcia_register_driver(&axnet_cs_driver); -} - -static void __exit exit_axnet_cs(void) -{ - pcmcia_unregister_driver(&axnet_cs_driver); -} - -module_init(init_axnet_cs); -module_exit(exit_axnet_cs); - -/*====================================================================*/ - -/* 8390.c: A general NS8390 ethernet driver core for linux. */ -/* - Written 1992-94 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - This is the chip-specific code for many 8390-based ethernet adaptors. - This is not a complete driver, it must be combined with board-specific - code such as ne.c, wd.c, 3c503.c, etc. - - Seeing how at least eight drivers use this code, (not counting the - PCMCIA ones either) it is easy to break some card by what seems like - a simple innocent change. Please contact me or Donald if you think - you have found something that needs changing. -- PG - - Changelog: - - Paul Gortmaker : remove set_bit lock, other cleanups. - Paul Gortmaker : add ei_get_8390_hdr() so we can pass skb's to - ei_block_input() for eth_io_copy_and_sum(). - Paul Gortmaker : exchange static int ei_pingpong for a #define, - also add better Tx error handling. - Paul Gortmaker : rewrite Rx overrun handling as per NS specs. - Alexey Kuznetsov : use the 8390's six bit hash multicast filter. - Paul Gortmaker : tweak ANK's above multicast changes a bit. - Paul Gortmaker : update packet statistics for v2.1.x - Alan Cox : support arbitrary stupid port mappings on the - 68K Macintosh. Support >16bit I/O spaces - Paul Gortmaker : add kmod support for auto-loading of the 8390 - module by all drivers that require it. - Alan Cox : Spinlocking work, added 'BUG_83C690' - Paul Gortmaker : Separate out Tx timeout code from Tx path. - - Sources: - The National Semiconductor LAN Databook, and the 3Com 3c503 databook. - - */ - -#include <linux/bitops.h> -#include <asm/irq.h> -#include <linux/fcntl.h> -#include <linux/in.h> -#include <linux/interrupt.h> - -#define BUG_83C690 - -/* These are the operational function interfaces to board-specific - routines. - void reset_8390(struct net_device *dev) - Resets the board associated with DEV, including a hardware reset of - the 8390. This is only called when there is a transmit timeout, and - it is always followed by 8390_init(). - void block_output(struct net_device *dev, int count, const unsigned char *buf, - int start_page) - Write the COUNT bytes of BUF to the packet buffer at START_PAGE. The - "page" value uses the 8390's 256-byte pages. - void get_8390_hdr(struct net_device *dev, struct e8390_hdr *hdr, int ring_page) - Read the 4 byte, page aligned 8390 header. *If* there is a - subsequent read, it will be of the rest of the packet. - void block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) - Read COUNT bytes from the packet buffer into the skb data area. Start - reading from RING_OFFSET, the address as the 8390 sees it. This will always - follow the read of the 8390 header. -*/ -#define ei_reset_8390 (ei_local->reset_8390) -#define ei_block_output (ei_local->block_output) -#define ei_block_input (ei_local->block_input) -#define ei_get_8390_hdr (ei_local->get_8390_hdr) - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef ei_debug -int ei_debug = 1; -#endif - -/* Index to functions. */ -static void ei_tx_intr(struct net_device *dev); -static void ei_tx_err(struct net_device *dev); -static void ei_receive(struct net_device *dev); -static void ei_rx_overrun(struct net_device *dev); - -/* Routines generic to NS8390-based boards. */ -static void NS8390_trigger_send(struct net_device *dev, unsigned int length, - int start_page); -static void do_set_multicast_list(struct net_device *dev); - -/* - * SMP and the 8390 setup. - * - * The 8390 isn't exactly designed to be multithreaded on RX/TX. There is - * a page register that controls bank and packet buffer access. We guard - * this with ei_local->page_lock. Nobody should assume or set the page other - * than zero when the lock is not held. Lock holders must restore page 0 - * before unlocking. Even pure readers must take the lock to protect in - * page 0. - * - * To make life difficult the chip can also be very slow. We therefore can't - * just use spinlocks. For the longer lockups we disable the irq the device - * sits on and hold the lock. We must hold the lock because there is a dual - * processor case other than interrupts (get stats/set multicast list in - * parallel with each other and transmit). - * - * Note: in theory we can just disable the irq on the card _but_ there is - * a latency on SMP irq delivery. So we can easily go "disable irq" "sync irqs" - * enter lock, take the queued irq. So we waddle instead of flying. - * - * Finally by special arrangement for the purpose of being generally - * annoying the transmit function is called bh atomic. That places - * restrictions on the user context callers as disable_irq won't save - * them. - */ - -/** - * ax_open - Open/initialize the board. - * @dev: network device to initialize - * - * This routine goes all-out, setting everything - * up anew at each open, even though many of these registers should only - * need to be set once at boot. - */ -static int ax_open(struct net_device *dev) -{ - unsigned long flags; - struct ei_device *ei_local = netdev_priv(dev); - - /* - * Grab the page lock so we own the register set, then call - * the init function. - */ - - spin_lock_irqsave(&ei_local->page_lock, flags); - AX88190_init(dev, 1); - /* Set the flag before we drop the lock, That way the IRQ arrives - after its set and we get no silly warnings */ - netif_start_queue(dev); - spin_unlock_irqrestore(&ei_local->page_lock, flags); - ei_local->irqlock = 0; - return 0; -} - -#define dev_lock(dev) (((struct ei_device *)netdev_priv(dev))->page_lock) - -/** - * ax_close - shut down network device - * @dev: network device to close - * - * Opposite of ax_open(). Only used when "ifconfig <devname> down" is done. - */ -static int ax_close(struct net_device *dev) -{ - unsigned long flags; - - /* - * Hold the page lock during close - */ - - spin_lock_irqsave(&dev_lock(dev), flags); - AX88190_init(dev, 0); - spin_unlock_irqrestore(&dev_lock(dev), flags); - netif_stop_queue(dev); - return 0; -} - -/** - * axnet_tx_timeout - handle transmit time out condition - * @dev: network device which has apparently fallen asleep - * - * Called by kernel when device never acknowledges a transmit has - * completed (or failed) - i.e. never posted a Tx related interrupt. - */ - -static void axnet_tx_timeout(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local = netdev_priv(dev); - int txsr, isr, tickssofar = jiffies - dev_trans_start(dev); - unsigned long flags; - - dev->stats.tx_errors++; - - spin_lock_irqsave(&ei_local->page_lock, flags); - txsr = inb(e8390_base+EN0_TSR); - isr = inb(e8390_base+EN0_ISR); - spin_unlock_irqrestore(&ei_local->page_lock, flags); - - netdev_printk(KERN_DEBUG, dev, - "Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n", - (txsr & ENTSR_ABT) ? "excess collisions." : - (isr) ? "lost interrupt?" : "cable problem?", - txsr, isr, tickssofar); - - if (!isr && !dev->stats.tx_packets) - { - /* The 8390 probably hasn't gotten on the cable yet. */ - ei_local->interface_num ^= 1; /* Try a different xcvr. */ - } - - /* Ugly but a reset can be slow, yet must be protected */ - - spin_lock_irqsave(&ei_local->page_lock, flags); - - /* Try to restart the card. Perhaps the user has fixed something. */ - ei_reset_8390(dev); - AX88190_init(dev, 1); - - spin_unlock_irqrestore(&ei_local->page_lock, flags); - netif_wake_queue(dev); -} - -/** - * axnet_start_xmit - begin packet transmission - * @skb: packet to be sent - * @dev: network device to which packet is sent - * - * Sends a packet to an 8390 network device. - */ - -static netdev_tx_t axnet_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local = netdev_priv(dev); - int length, send_length, output_page; - unsigned long flags; - u8 packet[ETH_ZLEN]; - - netif_stop_queue(dev); - - length = skb->len; - - /* Mask interrupts from the ethercard. - SMP: We have to grab the lock here otherwise the IRQ handler - on another CPU can flip window and race the IRQ mask set. We end - up trashing the mcast filter not disabling irqs if we don't lock */ - - spin_lock_irqsave(&ei_local->page_lock, flags); - outb_p(0x00, e8390_base + EN0_IMR); - - /* - * Slow phase with lock held. - */ - - ei_local->irqlock = 1; - - send_length = max(length, ETH_ZLEN); - - /* - * We have two Tx slots available for use. Find the first free - * slot, and then perform some sanity checks. With two Tx bufs, - * you get very close to transmitting back-to-back packets. With - * only one Tx buf, the transmitter sits idle while you reload the - * card, leaving a substantial gap between each transmitted packet. - */ - - if (ei_local->tx1 == 0) - { - output_page = ei_local->tx_start_page; - ei_local->tx1 = send_length; - if (ei_debug && ei_local->tx2 > 0) - netdev_printk(KERN_DEBUG, dev, - "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", - ei_local->tx2, ei_local->lasttx, - ei_local->txing); - } - else if (ei_local->tx2 == 0) - { - output_page = ei_local->tx_start_page + TX_PAGES/2; - ei_local->tx2 = send_length; - if (ei_debug && ei_local->tx1 > 0) - netdev_printk(KERN_DEBUG, dev, - "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", - ei_local->tx1, ei_local->lasttx, - ei_local->txing); - } - else - { /* We should never get here. */ - if (ei_debug) - netdev_printk(KERN_DEBUG, dev, - "No Tx buffers free! tx1=%d tx2=%d last=%d\n", - ei_local->tx1, ei_local->tx2, - ei_local->lasttx); - ei_local->irqlock = 0; - netif_stop_queue(dev); - outb_p(ENISR_ALL, e8390_base + EN0_IMR); - spin_unlock_irqrestore(&ei_local->page_lock, flags); - dev->stats.tx_errors++; - return NETDEV_TX_BUSY; - } - - /* - * Okay, now upload the packet and trigger a send if the transmitter - * isn't already sending. If it is busy, the interrupt handler will - * trigger the send later, upon receiving a Tx done interrupt. - */ - - if (length == skb->len) - ei_block_output(dev, length, skb->data, output_page); - else { - memset(packet, 0, ETH_ZLEN); - skb_copy_from_linear_data(skb, packet, skb->len); - ei_block_output(dev, length, packet, output_page); - } - - if (! ei_local->txing) - { - ei_local->txing = 1; - NS8390_trigger_send(dev, send_length, output_page); - dev->trans_start = jiffies; - if (output_page == ei_local->tx_start_page) - { - ei_local->tx1 = -1; - ei_local->lasttx = -1; - } - else - { - ei_local->tx2 = -1; - ei_local->lasttx = -2; - } - } - else ei_local->txqueue++; - - if (ei_local->tx1 && ei_local->tx2) - netif_stop_queue(dev); - else - netif_start_queue(dev); - - /* Turn 8390 interrupts back on. */ - ei_local->irqlock = 0; - outb_p(ENISR_ALL, e8390_base + EN0_IMR); - - spin_unlock_irqrestore(&ei_local->page_lock, flags); - - dev_kfree_skb (skb); - dev->stats.tx_bytes += send_length; - - return NETDEV_TX_OK; -} - -/** - * ax_interrupt - handle the interrupts from an 8390 - * @irq: interrupt number - * @dev_id: a pointer to the net_device - * - * Handle the ether interface interrupts. We pull packets from - * the 8390 via the card specific functions and fire them at the networking - * stack. We also handle transmit completions and wake the transmit path if - * necessary. We also update the counters and do other housekeeping as - * needed. - */ - -static irqreturn_t ax_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - long e8390_base; - int interrupts, nr_serviced = 0, i; - struct ei_device *ei_local; - int handled = 0; - unsigned long flags; - - e8390_base = dev->base_addr; - ei_local = netdev_priv(dev); - - /* - * Protect the irq test too. - */ - - spin_lock_irqsave(&ei_local->page_lock, flags); - - if (ei_local->irqlock) { -#if 1 /* This might just be an interrupt for a PCI device sharing this line */ - const char *msg; - /* The "irqlock" check is only for testing. */ - if (ei_local->irqlock) - msg = "Interrupted while interrupts are masked!"; - else - msg = "Reentering the interrupt handler!"; - netdev_info(dev, "%s, isr=%#2x imr=%#2x\n", - msg, - inb_p(e8390_base + EN0_ISR), - inb_p(e8390_base + EN0_IMR)); -#endif - spin_unlock_irqrestore(&ei_local->page_lock, flags); - return IRQ_NONE; - } - - if (ei_debug > 3) - netdev_printk(KERN_DEBUG, dev, "interrupt(isr=%#2.2x)\n", - inb_p(e8390_base + EN0_ISR)); - - outb_p(0x00, e8390_base + EN0_ISR); - ei_local->irqlock = 1; - - /* !!Assumption!! -- we stay in page 0. Don't break this. */ - while ((interrupts = inb_p(e8390_base + EN0_ISR)) != 0 && - ++nr_serviced < MAX_SERVICE) - { - if (!netif_running(dev) || (interrupts == 0xff)) { - if (ei_debug > 1) - netdev_warn(dev, - "interrupt from stopped card\n"); - outb_p(interrupts, e8390_base + EN0_ISR); - interrupts = 0; - break; - } - handled = 1; - - /* AX88190 bug fix. */ - outb_p(interrupts, e8390_base + EN0_ISR); - for (i = 0; i < 10; i++) { - if (!(inb(e8390_base + EN0_ISR) & interrupts)) - break; - outb_p(0, e8390_base + EN0_ISR); - outb_p(interrupts, e8390_base + EN0_ISR); - } - if (interrupts & ENISR_OVER) - ei_rx_overrun(dev); - else if (interrupts & (ENISR_RX+ENISR_RX_ERR)) - { - /* Got a good (?) packet. */ - ei_receive(dev); - } - /* Push the next to-transmit packet through. */ - if (interrupts & ENISR_TX) - ei_tx_intr(dev); - else if (interrupts & ENISR_TX_ERR) - ei_tx_err(dev); - - if (interrupts & ENISR_COUNTERS) - { - dev->stats.rx_frame_errors += inb_p(e8390_base + EN0_COUNTER0); - dev->stats.rx_crc_errors += inb_p(e8390_base + EN0_COUNTER1); - dev->stats.rx_missed_errors+= inb_p(e8390_base + EN0_COUNTER2); - } - } - - if (interrupts && ei_debug > 3) - { - handled = 1; - if (nr_serviced >= MAX_SERVICE) - { - /* 0xFF is valid for a card removal */ - if(interrupts!=0xFF) - netdev_warn(dev, "Too much work at interrupt, status %#2.2x\n", - interrupts); - outb_p(ENISR_ALL, e8390_base + EN0_ISR); /* Ack. most intrs. */ - } else { - netdev_warn(dev, "unknown interrupt %#2x\n", - interrupts); - outb_p(0xff, e8390_base + EN0_ISR); /* Ack. all intrs. */ - } - } - - /* Turn 8390 interrupts back on. */ - ei_local->irqlock = 0; - outb_p(ENISR_ALL, e8390_base + EN0_IMR); - - spin_unlock_irqrestore(&ei_local->page_lock, flags); - return IRQ_RETVAL(handled); -} - -/** - * ei_tx_err - handle transmitter error - * @dev: network device which threw the exception - * - * A transmitter error has happened. Most likely excess collisions (which - * is a fairly normal condition). If the error is one where the Tx will - * have been aborted, we try and send another one right away, instead of - * letting the failed packet sit and collect dust in the Tx buffer. This - * is a much better solution as it avoids kernel based Tx timeouts, and - * an unnecessary card reset. - * - * Called with lock held. - */ - -static void ei_tx_err(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - unsigned char txsr = inb_p(e8390_base+EN0_TSR); - unsigned char tx_was_aborted = txsr & (ENTSR_ABT+ENTSR_FU); - -#ifdef VERBOSE_ERROR_DUMP - netdev_printk(KERN_DEBUG, dev, - "transmitter error (%#2x):", txsr); - if (txsr & ENTSR_ABT) - pr_cont(" excess-collisions"); - if (txsr & ENTSR_ND) - pr_cont(" non-deferral"); - if (txsr & ENTSR_CRS) - pr_cont(" lost-carrier"); - if (txsr & ENTSR_FU) - pr_cont(" FIFO-underrun"); - if (txsr & ENTSR_CDH) - pr_cont(" lost-heartbeat"); - pr_cont("\n"); -#endif - - if (tx_was_aborted) - ei_tx_intr(dev); - else - { - dev->stats.tx_errors++; - if (txsr & ENTSR_CRS) dev->stats.tx_carrier_errors++; - if (txsr & ENTSR_CDH) dev->stats.tx_heartbeat_errors++; - if (txsr & ENTSR_OWC) dev->stats.tx_window_errors++; - } -} - -/** - * ei_tx_intr - transmit interrupt handler - * @dev: network device for which tx intr is handled - * - * We have finished a transmit: check for errors and then trigger the next - * packet to be sent. Called with lock held. - */ - -static void ei_tx_intr(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local = netdev_priv(dev); - int status = inb(e8390_base + EN0_TSR); - - /* - * There are two Tx buffers, see which one finished, and trigger - * the send of another one if it exists. - */ - ei_local->txqueue--; - - if (ei_local->tx1 < 0) - { - if (ei_local->lasttx != 1 && ei_local->lasttx != -1) - netdev_err(dev, "%s: bogus last_tx_buffer %d, tx1=%d\n", - ei_local->name, ei_local->lasttx, - ei_local->tx1); - ei_local->tx1 = 0; - if (ei_local->tx2 > 0) - { - ei_local->txing = 1; - NS8390_trigger_send(dev, ei_local->tx2, ei_local->tx_start_page + 6); - dev->trans_start = jiffies; - ei_local->tx2 = -1, - ei_local->lasttx = 2; - } - else ei_local->lasttx = 20, ei_local->txing = 0; - } - else if (ei_local->tx2 < 0) - { - if (ei_local->lasttx != 2 && ei_local->lasttx != -2) - netdev_info(dev, "%s: bogus last_tx_buffer %d, tx2=%d\n", - ei_local->name, ei_local->lasttx, - ei_local->tx2); - ei_local->tx2 = 0; - if (ei_local->tx1 > 0) - { - ei_local->txing = 1; - NS8390_trigger_send(dev, ei_local->tx1, ei_local->tx_start_page); - dev->trans_start = jiffies; - ei_local->tx1 = -1; - ei_local->lasttx = 1; - } - else - ei_local->lasttx = 10, ei_local->txing = 0; - } -// else -// netdev_warn(dev, "unexpected TX-done interrupt, lasttx=%d\n", -// ei_local->lasttx); - - /* Minimize Tx latency: update the statistics after we restart TXing. */ - if (status & ENTSR_COL) - dev->stats.collisions++; - if (status & ENTSR_PTX) - dev->stats.tx_packets++; - else - { - dev->stats.tx_errors++; - if (status & ENTSR_ABT) - { - dev->stats.tx_aborted_errors++; - dev->stats.collisions += 16; - } - if (status & ENTSR_CRS) - dev->stats.tx_carrier_errors++; - if (status & ENTSR_FU) - dev->stats.tx_fifo_errors++; - if (status & ENTSR_CDH) - dev->stats.tx_heartbeat_errors++; - if (status & ENTSR_OWC) - dev->stats.tx_window_errors++; - } - netif_wake_queue(dev); -} - -/** - * ei_receive - receive some packets - * @dev: network device with which receive will be run - * - * We have a good packet(s), get it/them out of the buffers. - * Called with lock held. - */ - -static void ei_receive(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local = netdev_priv(dev); - unsigned char rxing_page, this_frame, next_frame; - unsigned short current_offset; - int rx_pkt_count = 0; - struct e8390_pkt_hdr rx_frame; - - while (++rx_pkt_count < 10) - { - int pkt_len, pkt_stat; - - /* Get the rx page (incoming packet pointer). */ - rxing_page = inb_p(e8390_base + EN1_CURPAG -1); - - /* Remove one frame from the ring. Boundary is always a page behind. */ - this_frame = inb_p(e8390_base + EN0_BOUNDARY) + 1; - if (this_frame >= ei_local->stop_page) - this_frame = ei_local->rx_start_page; - - /* Someday we'll omit the previous, iff we never get this message. - (There is at least one clone claimed to have a problem.) - - Keep quiet if it looks like a card removal. One problem here - is that some clones crash in roughly the same way. - */ - if (ei_debug > 0 && this_frame != ei_local->current_page && (this_frame!=0x0 || rxing_page!=0xFF)) - netdev_err(dev, "mismatched read page pointers %2x vs %2x\n", - this_frame, ei_local->current_page); - - if (this_frame == rxing_page) /* Read all the frames? */ - break; /* Done for now */ - - current_offset = this_frame << 8; - ei_get_8390_hdr(dev, &rx_frame, this_frame); - - pkt_len = rx_frame.count - sizeof(struct e8390_pkt_hdr); - pkt_stat = rx_frame.status; - - next_frame = this_frame + 1 + ((pkt_len+4)>>8); - - if (pkt_len < 60 || pkt_len > 1518) - { - if (ei_debug) - netdev_printk(KERN_DEBUG, dev, - "bogus packet size: %d, status=%#2x nxpg=%#2x\n", - rx_frame.count, rx_frame.status, - rx_frame.next); - dev->stats.rx_errors++; - dev->stats.rx_length_errors++; - } - else if ((pkt_stat & 0x0F) == ENRSR_RXOK) - { - struct sk_buff *skb; - - skb = dev_alloc_skb(pkt_len+2); - if (skb == NULL) - { - if (ei_debug > 1) - netdev_printk(KERN_DEBUG, dev, - "Couldn't allocate a sk_buff of size %d\n", - pkt_len); - dev->stats.rx_dropped++; - break; - } - else - { - skb_reserve(skb,2); /* IP headers on 16 byte boundaries */ - skb_put(skb, pkt_len); /* Make room */ - ei_block_input(dev, pkt_len, skb, current_offset + sizeof(rx_frame)); - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - if (pkt_stat & ENRSR_PHY) - dev->stats.multicast++; - } - } - else - { - if (ei_debug) - netdev_printk(KERN_DEBUG, dev, - "bogus packet: status=%#2x nxpg=%#2x size=%d\n", - rx_frame.status, rx_frame.next, - rx_frame.count); - dev->stats.rx_errors++; - /* NB: The NIC counts CRC, frame and missed errors. */ - if (pkt_stat & ENRSR_FO) - dev->stats.rx_fifo_errors++; - } - next_frame = rx_frame.next; - - /* This _should_ never happen: it's here for avoiding bad clones. */ - if (next_frame >= ei_local->stop_page) { - netdev_info(dev, "next frame inconsistency, %#2x\n", - next_frame); - next_frame = ei_local->rx_start_page; - } - ei_local->current_page = next_frame; - outb_p(next_frame-1, e8390_base+EN0_BOUNDARY); - } -} - -/** - * ei_rx_overrun - handle receiver overrun - * @dev: network device which threw exception - * - * We have a receiver overrun: we have to kick the 8390 to get it started - * again. Problem is that you have to kick it exactly as NS prescribes in - * the updated datasheets, or "the NIC may act in an unpredictable manner." - * This includes causing "the NIC to defer indefinitely when it is stopped - * on a busy network." Ugh. - * Called with lock held. Don't call this with the interrupts off or your - * computer will hate you - it takes 10ms or so. - */ - -static void ei_rx_overrun(struct net_device *dev) -{ - axnet_dev_t *info = PRIV(dev); - long e8390_base = dev->base_addr; - unsigned char was_txing, must_resend = 0; - - /* - * Record whether a Tx was in progress and then issue the - * stop command. - */ - was_txing = inb_p(e8390_base+E8390_CMD) & E8390_TRANS; - outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); - - if (ei_debug > 1) - netdev_printk(KERN_DEBUG, dev, "Receiver overrun\n"); - dev->stats.rx_over_errors++; - - /* - * Wait a full Tx time (1.2ms) + some guard time, NS says 1.6ms total. - * We wait at least 2ms. - */ - - mdelay(2); - - /* - * Reset RBCR[01] back to zero as per magic incantation. - */ - outb_p(0x00, e8390_base+EN0_RCNTLO); - outb_p(0x00, e8390_base+EN0_RCNTHI); - - /* - * See if any Tx was interrupted or not. According to NS, this - * step is vital, and skipping it will cause no end of havoc. - */ - - if (was_txing) - { - unsigned char tx_completed = inb_p(e8390_base+EN0_ISR) & (ENISR_TX+ENISR_TX_ERR); - if (!tx_completed) - must_resend = 1; - } - - /* - * Have to enter loopback mode and then restart the NIC before - * you are allowed to slurp packets up off the ring. - */ - outb_p(E8390_TXOFF, e8390_base + EN0_TXCR); - outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START, e8390_base + E8390_CMD); - - /* - * Clear the Rx ring of all the debris, and ack the interrupt. - */ - ei_receive(dev); - - /* - * Leave loopback mode, and resend any packet that got stopped. - */ - outb_p(E8390_TXCONFIG | info->duplex_flag, e8390_base + EN0_TXCR); - if (must_resend) - outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START + E8390_TRANS, e8390_base + E8390_CMD); -} - -/* - * Collect the stats. This is called unlocked and from several contexts. - */ - -static struct net_device_stats *get_stats(struct net_device *dev) -{ - long ioaddr = dev->base_addr; - struct ei_device *ei_local = netdev_priv(dev); - unsigned long flags; - - /* If the card is stopped, just return the present stats. */ - if (!netif_running(dev)) - return &dev->stats; - - spin_lock_irqsave(&ei_local->page_lock,flags); - /* Read the counter registers, assuming we are in page 0. */ - dev->stats.rx_frame_errors += inb_p(ioaddr + EN0_COUNTER0); - dev->stats.rx_crc_errors += inb_p(ioaddr + EN0_COUNTER1); - dev->stats.rx_missed_errors+= inb_p(ioaddr + EN0_COUNTER2); - spin_unlock_irqrestore(&ei_local->page_lock, flags); - - return &dev->stats; -} - -/* - * Form the 64 bit 8390 multicast table from the linked list of addresses - * associated with this dev structure. - */ - -static inline void make_mc_bits(u8 *bits, struct net_device *dev) -{ - struct netdev_hw_addr *ha; - u32 crc; - - netdev_for_each_mc_addr(ha, dev) { - crc = ether_crc(ETH_ALEN, ha->addr); - /* - * The 8390 uses the 6 most significant bits of the - * CRC to index the multicast table. - */ - bits[crc>>29] |= (1<<((crc>>26)&7)); - } -} - -/** - * do_set_multicast_list - set/clear multicast filter - * @dev: net device for which multicast filter is adjusted - * - * Set or clear the multicast filter for this adaptor. - * Must be called with lock held. - */ - -static void do_set_multicast_list(struct net_device *dev) -{ - long e8390_base = dev->base_addr; - int i; - struct ei_device *ei_local = netdev_priv(dev); - - if (!(dev->flags&(IFF_PROMISC|IFF_ALLMULTI))) { - memset(ei_local->mcfilter, 0, 8); - if (!netdev_mc_empty(dev)) - make_mc_bits(ei_local->mcfilter, dev); - } else { - /* set to accept-all */ - memset(ei_local->mcfilter, 0xFF, 8); - } - - outb_p(E8390_NODMA + E8390_PAGE1, e8390_base + E8390_CMD); - for(i = 0; i < 8; i++) - { - outb_p(ei_local->mcfilter[i], e8390_base + EN1_MULT_SHIFT(i)); - } - outb_p(E8390_NODMA + E8390_PAGE0, e8390_base + E8390_CMD); - - if(dev->flags&IFF_PROMISC) - outb_p(E8390_RXCONFIG | 0x58, e8390_base + EN0_RXCR); - else if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev)) - outb_p(E8390_RXCONFIG | 0x48, e8390_base + EN0_RXCR); - else - outb_p(E8390_RXCONFIG | 0x40, e8390_base + EN0_RXCR); - - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD); -} - -/* - * Called without lock held. This is invoked from user context and may - * be parallel to just about everything else. Its also fairly quick and - * not called too often. Must protect against both bh and irq users - */ - -static void set_multicast_list(struct net_device *dev) -{ - unsigned long flags; - - spin_lock_irqsave(&dev_lock(dev), flags); - do_set_multicast_list(dev); - spin_unlock_irqrestore(&dev_lock(dev), flags); -} - -/* This page of functions should be 8390 generic */ -/* Follow National Semi's recommendations for initializing the "NIC". */ - -/** - * AX88190_init - initialize 8390 hardware - * @dev: network device to initialize - * @startp: boolean. non-zero value to initiate chip processing - * - * Must be called with lock held. - */ - -static void AX88190_init(struct net_device *dev, int startp) -{ - axnet_dev_t *info = PRIV(dev); - long e8390_base = dev->base_addr; - struct ei_device *ei_local = netdev_priv(dev); - int i; - int endcfg = ei_local->word16 ? (0x48 | ENDCFG_WTS) : 0x48; - - if(sizeof(struct e8390_pkt_hdr)!=4) - panic("8390.c: header struct mispacked\n"); - /* Follow National Semi's recommendations for initing the DP83902. */ - outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); /* 0x21 */ - outb_p(endcfg, e8390_base + EN0_DCFG); /* 0x48 or 0x49 */ - /* Clear the remote byte count registers. */ - outb_p(0x00, e8390_base + EN0_RCNTLO); - outb_p(0x00, e8390_base + EN0_RCNTHI); - /* Set to monitor and loopback mode -- this is vital!. */ - outb_p(E8390_RXOFF|0x40, e8390_base + EN0_RXCR); /* 0x60 */ - outb_p(E8390_TXOFF, e8390_base + EN0_TXCR); /* 0x02 */ - /* Set the transmit page and receive ring. */ - outb_p(ei_local->tx_start_page, e8390_base + EN0_TPSR); - ei_local->tx1 = ei_local->tx2 = 0; - outb_p(ei_local->rx_start_page, e8390_base + EN0_STARTPG); - outb_p(ei_local->stop_page-1, e8390_base + EN0_BOUNDARY); /* 3c503 says 0x3f,NS0x26*/ - ei_local->current_page = ei_local->rx_start_page; /* assert boundary+1 */ - outb_p(ei_local->stop_page, e8390_base + EN0_STOPPG); - /* Clear the pending interrupts and mask. */ - outb_p(0xFF, e8390_base + EN0_ISR); - outb_p(0x00, e8390_base + EN0_IMR); - - /* Copy the station address into the DS8390 registers. */ - - outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP, e8390_base+E8390_CMD); /* 0x61 */ - for(i = 0; i < 6; i++) - { - outb_p(dev->dev_addr[i], e8390_base + EN1_PHYS_SHIFT(i)); - if(inb_p(e8390_base + EN1_PHYS_SHIFT(i))!=dev->dev_addr[i]) - netdev_err(dev, "Hw. address read/write mismap %d\n", i); - } - - outb_p(ei_local->rx_start_page, e8390_base + EN1_CURPAG); - outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); - - netif_start_queue(dev); - ei_local->tx1 = ei_local->tx2 = 0; - ei_local->txing = 0; - - if (info->flags & IS_AX88790) /* select Internal PHY */ - outb(0x10, e8390_base + AXNET_GPIO); - - if (startp) - { - outb_p(0xff, e8390_base + EN0_ISR); - outb_p(ENISR_ALL, e8390_base + EN0_IMR); - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD); - outb_p(E8390_TXCONFIG | info->duplex_flag, - e8390_base + EN0_TXCR); /* xmit on. */ - /* 3c503 TechMan says rxconfig only after the NIC is started. */ - outb_p(E8390_RXCONFIG | 0x40, e8390_base + EN0_RXCR); /* rx on, */ - do_set_multicast_list(dev); /* (re)load the mcast table */ - } -} - -/* Trigger a transmit start, assuming the length is valid. - Always called with the page lock held */ - -static void NS8390_trigger_send(struct net_device *dev, unsigned int length, - int start_page) -{ - long e8390_base = dev->base_addr; - struct ei_device *ei_local __attribute((unused)) = netdev_priv(dev); - - if (inb_p(e8390_base) & E8390_TRANS) - { - netdev_warn(dev, "trigger_send() called with the transmitter busy\n"); - return; - } - outb_p(length & 0xff, e8390_base + EN0_TCNTLO); - outb_p(length >> 8, e8390_base + EN0_TCNTHI); - outb_p(start_page, e8390_base + EN0_TPSR); - outb_p(E8390_NODMA+E8390_TRANS+E8390_START, e8390_base+E8390_CMD); -} diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c deleted file mode 100644 index b4fd7c3ed07..00000000000 --- a/drivers/net/pcmcia/pcnet_cs.c +++ /dev/null @@ -1,1710 +0,0 @@ -/*====================================================================== - - A PCMCIA ethernet driver for NS8390-based cards - - This driver supports the D-Link DE-650 and Linksys EthernetCard - cards, the newer D-Link and Linksys combo cards, Accton EN2212 - cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory - mode, and the IBM Credit Card Adapter, the NE4100, the Thomas - Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory - mode. It will also handle the Socket EA card in either mode. - - Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net - - pcnet_cs.c 1.153 2003/11/09 18:53:09 - - The network driver code is based on Donald Becker's NE2000 code: - - Written 1992,1993 by Donald Becker. - Copyright 1993 United States Government as represented by the - Director, National Security Agency. This software may be used and - distributed according to the terms of the GNU General Public License, - incorporated herein by reference. - Donald Becker may be reached at becker@scyld.com - - Based also on Keith Moore's changes to Don Becker's code, for IBM - CCAE support. Drivers merged back together, and shared-memory - Socket EA support added, by Ken Raeburn, September 1995. - -======================================================================*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/ptrace.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/log2.h> -#include <linux/etherdevice.h> -#include <linux/mii.h> -#include "../8390.h" - -#include <pcmcia/cistpl.h> -#include <pcmcia/ciscode.h> -#include <pcmcia/ds.h> -#include <pcmcia/cisreg.h> - -#include <asm/io.h> -#include <asm/system.h> -#include <asm/byteorder.h> -#include <asm/uaccess.h> - -#define PCNET_CMD 0x00 -#define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */ -#define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */ -#define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */ - -#define PCNET_START_PG 0x40 /* First page of TX buffer */ -#define PCNET_STOP_PG 0x80 /* Last page +1 of RX ring */ - -/* Socket EA cards have a larger packet buffer */ -#define SOCKET_START_PG 0x01 -#define SOCKET_STOP_PG 0xff - -#define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */ - -static const char *if_names[] = { "auto", "10baseT", "10base2"}; - - -/*====================================================================*/ - -/* Module parameters */ - -MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); -MODULE_DESCRIPTION("NE2000 compatible PCMCIA ethernet driver"); -MODULE_LICENSE("GPL"); - -#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) - -INT_MODULE_PARM(if_port, 1); /* Transceiver type */ -INT_MODULE_PARM(use_big_buf, 1); /* use 64K packet buffer? */ -INT_MODULE_PARM(mem_speed, 0); /* shared mem speed, in ns */ -INT_MODULE_PARM(delay_output, 0); /* pause after xmit? */ -INT_MODULE_PARM(delay_time, 4); /* in usec */ -INT_MODULE_PARM(use_shmem, -1); /* use shared memory? */ -INT_MODULE_PARM(full_duplex, 0); /* full duplex? */ - -/* Ugh! Let the user hardwire the hardware address for queer cards */ -static int hw_addr[6] = { 0, /* ... */ }; -module_param_array(hw_addr, int, NULL, 0); - -/*====================================================================*/ - -static void mii_phy_probe(struct net_device *dev); -static int pcnet_config(struct pcmcia_device *link); -static void pcnet_release(struct pcmcia_device *link); -static int pcnet_open(struct net_device *dev); -static int pcnet_close(struct net_device *dev); -static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static irqreturn_t ei_irq_wrapper(int irq, void *dev_id); -static void ei_watchdog(u_long arg); -static void pcnet_reset_8390(struct net_device *dev); -static int set_config(struct net_device *dev, struct ifmap *map); -static int setup_shmem_window(struct pcmcia_device *link, int start_pg, - int stop_pg, int cm_offset); -static int setup_dma_config(struct pcmcia_device *link, int start_pg, - int stop_pg); - -static void pcnet_detach(struct pcmcia_device *p_dev); - -/*====================================================================*/ - -typedef struct hw_info_t { - u_int offset; - u_char a0, a1, a2; - u_int flags; -} hw_info_t; - -#define DELAY_OUTPUT 0x01 -#define HAS_MISC_REG 0x02 -#define USE_BIG_BUF 0x04 -#define HAS_IBM_MISC 0x08 -#define IS_DL10019 0x10 -#define IS_DL10022 0x20 -#define HAS_MII 0x40 -#define USE_SHMEM 0x80 /* autodetected */ - -#define AM79C9XX_HOME_PHY 0x00006B90 /* HomePNA PHY */ -#define AM79C9XX_ETH_PHY 0x00006B70 /* 10baseT PHY */ -#define MII_PHYID_REV_MASK 0xfffffff0 -#define MII_PHYID_REG1 0x02 -#define MII_PHYID_REG2 0x03 - -static hw_info_t hw_info[] = { - { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT }, - { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 }, - { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 }, - { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94, - DELAY_OUTPUT | HAS_IBM_MISC }, - { /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 }, - { /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 }, - { /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 }, - { /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 }, - { /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 }, - { /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 }, - { /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 }, - { /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 }, - { /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* IBM FME */ 0x0374, 0x00, 0x04, 0xac, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 }, - { /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 }, - { /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 }, - { /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 }, - { /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 }, - { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 }, - { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45, - HAS_MISC_REG | HAS_IBM_MISC }, - { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 }, - { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 }, - { /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 }, - { /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b, - DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF }, - { /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 }, - { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 }, - { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 }, - { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 }, - { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 } -}; - -#define NR_INFO ARRAY_SIZE(hw_info) - -static hw_info_t default_info = { 0, 0, 0, 0, 0 }; -static hw_info_t dl10019_info = { 0, 0, 0, 0, IS_DL10019|HAS_MII }; -static hw_info_t dl10022_info = { 0, 0, 0, 0, IS_DL10022|HAS_MII }; - -typedef struct pcnet_dev_t { - struct pcmcia_device *p_dev; - u_int flags; - void __iomem *base; - struct timer_list watchdog; - int stale, fast_poll; - u_char phy_id; - u_char eth_phy, pna_phy; - u_short link_status; - u_long mii_reset; -} pcnet_dev_t; - -static inline pcnet_dev_t *PRIV(struct net_device *dev) -{ - char *p = netdev_priv(dev); - return (pcnet_dev_t *)(p + sizeof(struct ei_device)); -} - -static const struct net_device_ops pcnet_netdev_ops = { - .ndo_open = pcnet_open, - .ndo_stop = pcnet_close, - .ndo_set_config = set_config, - .ndo_start_xmit = ei_start_xmit, - .ndo_get_stats = ei_get_stats, - .ndo_do_ioctl = ei_ioctl, - .ndo_set_multicast_list = ei_set_multicast_list, - .ndo_tx_timeout = ei_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ei_poll, -#endif -}; - -static int pcnet_probe(struct pcmcia_device *link) -{ - pcnet_dev_t *info; - struct net_device *dev; - - dev_dbg(&link->dev, "pcnet_attach()\n"); - - /* Create new ethernet device */ - dev = __alloc_ei_netdev(sizeof(pcnet_dev_t)); - if (!dev) return -ENOMEM; - info = PRIV(dev); - info->p_dev = link; - link->priv = dev; - - link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; - - dev->netdev_ops = &pcnet_netdev_ops; - - return pcnet_config(link); -} /* pcnet_attach */ - -static void pcnet_detach(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - - dev_dbg(&link->dev, "pcnet_detach\n"); - - unregister_netdev(dev); - - pcnet_release(link); - - free_netdev(dev); -} /* pcnet_detach */ - -/*====================================================================== - - This probes for a card's hardware address, for card types that - encode this information in their CIS. - -======================================================================*/ - -static hw_info_t *get_hwinfo(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - u_char __iomem *base, *virt; - int i, j; - - /* Allocate a small memory window */ - link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - link->resource[2]->start = 0; link->resource[2]->end = 0; - i = pcmcia_request_window(link, link->resource[2], 0); - if (i != 0) - return NULL; - - virt = ioremap(link->resource[2]->start, - resource_size(link->resource[2])); - for (i = 0; i < NR_INFO; i++) { - pcmcia_map_mem_page(link, link->resource[2], - hw_info[i].offset & ~(resource_size(link->resource[2])-1)); - base = &virt[hw_info[i].offset & (resource_size(link->resource[2])-1)]; - if ((readb(base+0) == hw_info[i].a0) && - (readb(base+2) == hw_info[i].a1) && - (readb(base+4) == hw_info[i].a2)) { - for (j = 0; j < 6; j++) - dev->dev_addr[j] = readb(base + (j<<1)); - break; - } - } - - iounmap(virt); - j = pcmcia_release_window(link, link->resource[2]); - return (i < NR_INFO) ? hw_info+i : NULL; -} /* get_hwinfo */ - -/*====================================================================== - - This probes for a card's hardware address by reading the PROM. - It checks the address against a list of known types, then falls - back to a simple NE2000 clone signature check. - -======================================================================*/ - -static hw_info_t *get_prom(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - unsigned int ioaddr = dev->base_addr; - u_char prom[32]; - int i, j; - - /* This is lifted straight from drivers/net/ne.c */ - struct { - u_char value, offset; - } program_seq[] = { - {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/ - {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */ - {0x00, EN0_RCNTLO}, /* Clear the count regs. */ - {0x00, EN0_RCNTHI}, - {0x00, EN0_IMR}, /* Mask completion irq. */ - {0xFF, EN0_ISR}, - {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */ - {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */ - {32, EN0_RCNTLO}, - {0x00, EN0_RCNTHI}, - {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */ - {0x00, EN0_RSARHI}, - {E8390_RREAD+E8390_START, E8390_CMD}, - }; - - pcnet_reset_8390(dev); - mdelay(10); - - for (i = 0; i < ARRAY_SIZE(program_seq); i++) - outb_p(program_seq[i].value, ioaddr + program_seq[i].offset); - - for (i = 0; i < 32; i++) - prom[i] = inb(ioaddr + PCNET_DATAPORT); - for (i = 0; i < NR_INFO; i++) { - if ((prom[0] == hw_info[i].a0) && - (prom[2] == hw_info[i].a1) && - (prom[4] == hw_info[i].a2)) - break; - } - if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) { - for (j = 0; j < 6; j++) - dev->dev_addr[j] = prom[j<<1]; - return (i < NR_INFO) ? hw_info+i : &default_info; - } - return NULL; -} /* get_prom */ - -/*====================================================================== - - For DL10019 based cards, like the Linksys EtherFast - -======================================================================*/ - -static hw_info_t *get_dl10019(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - int i; - u_char sum; - - for (sum = 0, i = 0x14; i < 0x1c; i++) - sum += inb_p(dev->base_addr + i); - if (sum != 0xff) - return NULL; - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb_p(dev->base_addr + 0x14 + i); - i = inb(dev->base_addr + 0x1f); - return ((i == 0x91)||(i == 0x99)) ? &dl10022_info : &dl10019_info; -} - -/*====================================================================== - - For Asix AX88190 based cards - -======================================================================*/ - -static hw_info_t *get_ax88190(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - unsigned int ioaddr = dev->base_addr; - int i, j; - - /* Not much of a test, but the alternatives are messy */ - if (link->config_base != 0x03c0) - return NULL; - - outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */ - outb_p(0x00, ioaddr + EN0_RSARLO); /* DMA starting at 0x0400. */ - outb_p(0x04, ioaddr + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, ioaddr + E8390_CMD); - - for (i = 0; i < 6; i += 2) { - j = inw(ioaddr + PCNET_DATAPORT); - dev->dev_addr[i] = j & 0xff; - dev->dev_addr[i+1] = j >> 8; - } - return NULL; -} - -/*====================================================================== - - This should be totally unnecessary... but when we can't figure - out the hardware address any other way, we'll let the user hard - wire it when the module is initialized. - -======================================================================*/ - -static hw_info_t *get_hwired(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - int i; - - for (i = 0; i < 6; i++) - if (hw_addr[i] != 0) break; - if (i == 6) - return NULL; - - for (i = 0; i < 6; i++) - dev->dev_addr[i] = hw_addr[i]; - - return &default_info; -} /* get_hwired */ - -static int try_io_port(struct pcmcia_device *link) -{ - int j, ret; - link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; - if (link->resource[0]->end == 32) { - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - if (link->resource[1]->end > 0) { - /* for master/slave multifunction cards */ - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - } - } else { - /* This should be two 16-port windows */ - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; - } - if (link->resource[0]->start == 0) { - for (j = 0; j < 0x400; j += 0x20) { - link->resource[0]->start = j ^ 0x300; - link->resource[1]->start = (j ^ 0x300) + 0x10; - link->io_lines = 16; - ret = pcmcia_request_io(link); - if (ret == 0) - return ret; - } - return ret; - } else { - return pcmcia_request_io(link); - } -} - -static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data) -{ - int *priv = priv_data; - int try = (*priv & 0x1); - - *priv &= (p_dev->resource[2]->end >= 0x4000) ? 0x10 : ~0x10; - - if (p_dev->config_index == 0) - return -EINVAL; - - if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) - return -EINVAL; - - if (try) - p_dev->io_lines = 16; - return try_io_port(p_dev); -} - -static hw_info_t *pcnet_try_config(struct pcmcia_device *link, - int *has_shmem, int try) -{ - struct net_device *dev = link->priv; - hw_info_t *local_hw_info; - pcnet_dev_t *info = PRIV(dev); - int priv = try; - int ret; - - ret = pcmcia_loop_config(link, pcnet_confcheck, &priv); - if (ret) { - dev_warn(&link->dev, "no useable port range found\n"); - return NULL; - } - *has_shmem = (priv & 0x10); - - if (!link->irq) - return NULL; - - if (resource_size(link->resource[1]) == 8) - link->config_flags |= CONF_ENABLE_SPKR; - - if ((link->manf_id == MANFID_IBM) && - (link->card_id == PRODID_IBM_HOME_AND_AWAY)) - link->config_index |= 0x10; - - ret = pcmcia_enable_device(link); - if (ret) - return NULL; - - dev->irq = link->irq; - dev->base_addr = link->resource[0]->start; - - if (info->flags & HAS_MISC_REG) { - if ((if_port == 1) || (if_port == 2)) - dev->if_port = if_port; - else - dev_notice(&link->dev, "invalid if_port requested\n"); - } else - dev->if_port = 0; - - if ((link->config_base == 0x03c0) && - (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) { - dev_info(&link->dev, - "this is an AX88190 card - use axnet_cs instead.\n"); - return NULL; - } - - local_hw_info = get_hwinfo(link); - if (!local_hw_info) - local_hw_info = get_prom(link); - if (!local_hw_info) - local_hw_info = get_dl10019(link); - if (!local_hw_info) - local_hw_info = get_ax88190(link); - if (!local_hw_info) - local_hw_info = get_hwired(link); - - return local_hw_info; -} - -static int pcnet_config(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - pcnet_dev_t *info = PRIV(dev); - int start_pg, stop_pg, cm_offset; - int has_shmem = 0; - hw_info_t *local_hw_info; - - dev_dbg(&link->dev, "pcnet_config\n"); - - local_hw_info = pcnet_try_config(link, &has_shmem, 0); - if (!local_hw_info) { - /* check whether forcing io_lines to 16 helps... */ - pcmcia_disable_device(link); - local_hw_info = pcnet_try_config(link, &has_shmem, 1); - if (local_hw_info == NULL) { - dev_notice(&link->dev, "unable to read hardware net" - " address for io base %#3lx\n", dev->base_addr); - goto failed; - } - } - - info->flags = local_hw_info->flags; - /* Check for user overrides */ - info->flags |= (delay_output) ? DELAY_OUTPUT : 0; - if ((link->manf_id == MANFID_SOCKET) && - ((link->card_id == PRODID_SOCKET_LPE) || - (link->card_id == PRODID_SOCKET_LPE_CF) || - (link->card_id == PRODID_SOCKET_EIO))) - info->flags &= ~USE_BIG_BUF; - if (!use_big_buf) - info->flags &= ~USE_BIG_BUF; - - if (info->flags & USE_BIG_BUF) { - start_pg = SOCKET_START_PG; - stop_pg = SOCKET_STOP_PG; - cm_offset = 0x10000; - } else { - start_pg = PCNET_START_PG; - stop_pg = PCNET_STOP_PG; - cm_offset = 0; - } - - /* has_shmem is ignored if use_shmem != -1 */ - if ((use_shmem == 0) || (!has_shmem && (use_shmem == -1)) || - (setup_shmem_window(link, start_pg, stop_pg, cm_offset) != 0)) - setup_dma_config(link, start_pg, stop_pg); - - ei_status.name = "NE2000"; - ei_status.word16 = 1; - ei_status.reset_8390 = pcnet_reset_8390; - - if (info->flags & (IS_DL10019|IS_DL10022)) - mii_phy_probe(dev); - - SET_NETDEV_DEV(dev, &link->dev); - - if (register_netdev(dev) != 0) { - pr_notice("register_netdev() failed\n"); - goto failed; - } - - if (info->flags & (IS_DL10019|IS_DL10022)) { - u_char id = inb(dev->base_addr + 0x1a); - netdev_info(dev, "NE2000 (DL100%d rev %02x): ", - (info->flags & IS_DL10022) ? 22 : 19, id); - if (info->pna_phy) - pr_cont("PNA, "); - } else { - netdev_info(dev, "NE2000 Compatible: "); - } - pr_cont("io %#3lx, irq %d,", dev->base_addr, dev->irq); - if (info->flags & USE_SHMEM) - pr_cont(" mem %#5lx,", dev->mem_start); - if (info->flags & HAS_MISC_REG) - pr_cont(" %s xcvr,", if_names[dev->if_port]); - pr_cont(" hw_addr %pM\n", dev->dev_addr); - return 0; - -failed: - pcnet_release(link); - return -ENODEV; -} /* pcnet_config */ - -static void pcnet_release(struct pcmcia_device *link) -{ - pcnet_dev_t *info = PRIV(link->priv); - - dev_dbg(&link->dev, "pcnet_release\n"); - - if (info->flags & USE_SHMEM) - iounmap(info->base); - - pcmcia_disable_device(link); -} - -static int pcnet_suspend(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - - if (link->open) - netif_device_detach(dev); - - return 0; -} - -static int pcnet_resume(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - - if (link->open) { - pcnet_reset_8390(dev); - NS8390_init(dev, 1); - netif_device_attach(dev); - } - - return 0; -} - - -/*====================================================================== - - MII interface support for DL10019 and DL10022 based cards - - On the DL10019, the MII IO direction bit is 0x10; on the DL10022 - it is 0x20. Setting both bits seems to work on both card types. - -======================================================================*/ - -#define DLINK_GPIO 0x1c -#define DLINK_DIAG 0x1d -#define DLINK_EEPROM 0x1e - -#define MDIO_SHIFT_CLK 0x80 -#define MDIO_DATA_OUT 0x40 -#define MDIO_DIR_WRITE 0x30 -#define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE) -#define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT) -#define MDIO_DATA_READ 0x10 -#define MDIO_MASK 0x0f - -static void mdio_sync(unsigned int addr) -{ - int bits, mask = inb(addr) & MDIO_MASK; - for (bits = 0; bits < 32; bits++) { - outb(mask | MDIO_DATA_WRITE1, addr); - outb(mask | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr); - } -} - -static int mdio_read(unsigned int addr, int phy_id, int loc) -{ - u_int cmd = (0x06<<10)|(phy_id<<5)|loc; - int i, retval = 0, mask = inb(addr) & MDIO_MASK; - - mdio_sync(addr); - for (i = 13; i >= 0; i--) { - int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; - outb(mask | dat, addr); - outb(mask | dat | MDIO_SHIFT_CLK, addr); - } - for (i = 19; i > 0; i--) { - outb(mask, addr); - retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0); - outb(mask | MDIO_SHIFT_CLK, addr); - } - return (retval>>1) & 0xffff; -} - -static void mdio_write(unsigned int addr, int phy_id, int loc, int value) -{ - u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value; - int i, mask = inb(addr) & MDIO_MASK; - - mdio_sync(addr); - for (i = 31; i >= 0; i--) { - int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; - outb(mask | dat, addr); - outb(mask | dat | MDIO_SHIFT_CLK, addr); - } - for (i = 1; i >= 0; i--) { - outb(mask, addr); - outb(mask | MDIO_SHIFT_CLK, addr); - } -} - -/*====================================================================== - - EEPROM access routines for DL10019 and DL10022 based cards - -======================================================================*/ - -#define EE_EEP 0x40 -#define EE_ASIC 0x10 -#define EE_CS 0x08 -#define EE_CK 0x04 -#define EE_DO 0x02 -#define EE_DI 0x01 -#define EE_ADOT 0x01 /* DataOut for ASIC */ -#define EE_READ_CMD 0x06 - -#define DL19FDUPLX 0x0400 /* DL10019 Full duplex mode */ - -static int read_eeprom(unsigned int ioaddr, int location) -{ - int i, retval = 0; - unsigned int ee_addr = ioaddr + DLINK_EEPROM; - int read_cmd = location | (EE_READ_CMD << 8); - - outb(0, ee_addr); - outb(EE_EEP|EE_CS, ee_addr); - - /* Shift the read command bits out. */ - for (i = 10; i >= 0; i--) { - short dataval = (read_cmd & (1 << i)) ? EE_DO : 0; - outb_p(EE_EEP|EE_CS|dataval, ee_addr); - outb_p(EE_EEP|EE_CS|dataval|EE_CK, ee_addr); - } - outb(EE_EEP|EE_CS, ee_addr); - - for (i = 16; i > 0; i--) { - outb_p(EE_EEP|EE_CS | EE_CK, ee_addr); - retval = (retval << 1) | ((inb(ee_addr) & EE_DI) ? 1 : 0); - outb_p(EE_EEP|EE_CS, ee_addr); - } - - /* Terminate the EEPROM access. */ - outb(0, ee_addr); - return retval; -} - -/* - The internal ASIC registers can be changed by EEPROM READ access - with EE_ASIC bit set. - In ASIC mode, EE_ADOT is used to output the data to the ASIC. -*/ - -static void write_asic(unsigned int ioaddr, int location, short asic_data) -{ - int i; - unsigned int ee_addr = ioaddr + DLINK_EEPROM; - short dataval; - int read_cmd = location | (EE_READ_CMD << 8); - - asic_data |= read_eeprom(ioaddr, location); - - outb(0, ee_addr); - outb(EE_ASIC|EE_CS|EE_DI, ee_addr); - - read_cmd = read_cmd >> 1; - - /* Shift the read command bits out. */ - for (i = 9; i >= 0; i--) { - dataval = (read_cmd & (1 << i)) ? EE_DO : 0; - outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr); - outb_p(EE_ASIC|EE_CS|EE_DI|dataval|EE_CK, ee_addr); - outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr); - } - // sync - outb(EE_ASIC|EE_CS, ee_addr); - outb(EE_ASIC|EE_CS|EE_CK, ee_addr); - outb(EE_ASIC|EE_CS, ee_addr); - - for (i = 15; i >= 0; i--) { - dataval = (asic_data & (1 << i)) ? EE_ADOT : 0; - outb_p(EE_ASIC|EE_CS|dataval, ee_addr); - outb_p(EE_ASIC|EE_CS|dataval|EE_CK, ee_addr); - outb_p(EE_ASIC|EE_CS|dataval, ee_addr); - } - - /* Terminate the ASIC access. */ - outb(EE_ASIC|EE_DI, ee_addr); - outb(EE_ASIC|EE_DI| EE_CK, ee_addr); - outb(EE_ASIC|EE_DI, ee_addr); - - outb(0, ee_addr); -} - -/*====================================================================*/ - -static void set_misc_reg(struct net_device *dev) -{ - unsigned int nic_base = dev->base_addr; - pcnet_dev_t *info = PRIV(dev); - u_char tmp; - - if (info->flags & HAS_MISC_REG) { - tmp = inb_p(nic_base + PCNET_MISC) & ~3; - if (dev->if_port == 2) - tmp |= 1; - if (info->flags & USE_BIG_BUF) - tmp |= 2; - if (info->flags & HAS_IBM_MISC) - tmp |= 8; - outb_p(tmp, nic_base + PCNET_MISC); - } - if (info->flags & IS_DL10022) { - if (info->flags & HAS_MII) { - /* Advertise 100F, 100H, 10F, 10H */ - mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1); - /* Restart MII autonegotiation */ - mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000); - mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200); - info->mii_reset = jiffies; - } else { - outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG); - } - } else if (info->flags & IS_DL10019) { - /* Advertise 100F, 100H, 10F, 10H */ - mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1); - /* Restart MII autonegotiation */ - mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000); - mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200); - } -} - -/*====================================================================*/ - -static void mii_phy_probe(struct net_device *dev) -{ - pcnet_dev_t *info = PRIV(dev); - unsigned int mii_addr = dev->base_addr + DLINK_GPIO; - int i; - u_int tmp, phyid; - - for (i = 31; i >= 0; i--) { - tmp = mdio_read(mii_addr, i, 1); - if ((tmp == 0) || (tmp == 0xffff)) - continue; - tmp = mdio_read(mii_addr, i, MII_PHYID_REG1); - phyid = tmp << 16; - phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2); - phyid &= MII_PHYID_REV_MASK; - netdev_dbg(dev, "MII at %d is 0x%08x\n", i, phyid); - if (phyid == AM79C9XX_HOME_PHY) { - info->pna_phy = i; - } else if (phyid != AM79C9XX_ETH_PHY) { - info->eth_phy = i; - } - } -} - -static int pcnet_open(struct net_device *dev) -{ - int ret; - pcnet_dev_t *info = PRIV(dev); - struct pcmcia_device *link = info->p_dev; - unsigned int nic_base = dev->base_addr; - - dev_dbg(&link->dev, "pcnet_open('%s')\n", dev->name); - - if (!pcmcia_dev_present(link)) - return -ENODEV; - - set_misc_reg(dev); - - outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */ - ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev->name, dev); - if (ret) - return ret; - - link->open++; - - info->phy_id = info->eth_phy; - info->link_status = 0x00; - init_timer(&info->watchdog); - info->watchdog.function = ei_watchdog; - info->watchdog.data = (u_long)dev; - info->watchdog.expires = jiffies + HZ; - add_timer(&info->watchdog); - - return ei_open(dev); -} /* pcnet_open */ - -/*====================================================================*/ - -static int pcnet_close(struct net_device *dev) -{ - pcnet_dev_t *info = PRIV(dev); - struct pcmcia_device *link = info->p_dev; - - dev_dbg(&link->dev, "pcnet_close('%s')\n", dev->name); - - ei_close(dev); - free_irq(dev->irq, dev); - - link->open--; - netif_stop_queue(dev); - del_timer_sync(&info->watchdog); - - return 0; -} /* pcnet_close */ - -/*====================================================================== - - Hard reset the card. This used to pause for the same period that - a 8390 reset command required, but that shouldn't be necessary. - -======================================================================*/ - -static void pcnet_reset_8390(struct net_device *dev) -{ - unsigned int nic_base = dev->base_addr; - int i; - - ei_status.txing = ei_status.dmaing = 0; - - outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, nic_base + E8390_CMD); - - outb(inb(nic_base + PCNET_RESET), nic_base + PCNET_RESET); - - for (i = 0; i < 100; i++) { - if ((inb_p(nic_base+EN0_ISR) & ENISR_RESET) != 0) - break; - udelay(100); - } - outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */ - - if (i == 100) - netdev_err(dev, "pcnet_reset_8390() did not complete.\n"); - - set_misc_reg(dev); - -} /* pcnet_reset_8390 */ - -/*====================================================================*/ - -static int set_config(struct net_device *dev, struct ifmap *map) -{ - pcnet_dev_t *info = PRIV(dev); - if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { - if (!(info->flags & HAS_MISC_REG)) - return -EOPNOTSUPP; - else if ((map->port < 1) || (map->port > 2)) - return -EINVAL; - dev->if_port = map->port; - netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]); - NS8390_init(dev, 1); - } - return 0; -} - -/*====================================================================*/ - -static irqreturn_t ei_irq_wrapper(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - pcnet_dev_t *info; - irqreturn_t ret = ei_interrupt(irq, dev_id); - - if (ret == IRQ_HANDLED) { - info = PRIV(dev); - info->stale = 0; - } - return ret; -} - -static void ei_watchdog(u_long arg) -{ - struct net_device *dev = (struct net_device *)arg; - pcnet_dev_t *info = PRIV(dev); - unsigned int nic_base = dev->base_addr; - unsigned int mii_addr = nic_base + DLINK_GPIO; - u_short link; - - if (!netif_device_present(dev)) goto reschedule; - - /* Check for pending interrupt with expired latency timer: with - this, we can limp along even if the interrupt is blocked */ - if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) { - if (!info->fast_poll) - netdev_info(dev, "interrupt(s) dropped!\n"); - ei_irq_wrapper(dev->irq, dev); - info->fast_poll = HZ; - } - if (info->fast_poll) { - info->fast_poll--; - info->watchdog.expires = jiffies + 1; - add_timer(&info->watchdog); - return; - } - - if (!(info->flags & HAS_MII)) - goto reschedule; - - mdio_read(mii_addr, info->phy_id, 1); - link = mdio_read(mii_addr, info->phy_id, 1); - if (!link || (link == 0xffff)) { - if (info->eth_phy) { - info->phy_id = info->eth_phy = 0; - } else { - netdev_info(dev, "MII is missing!\n"); - info->flags &= ~HAS_MII; - } - goto reschedule; - } - - link &= 0x0004; - if (link != info->link_status) { - u_short p = mdio_read(mii_addr, info->phy_id, 5); - netdev_info(dev, "%s link beat\n", link ? "found" : "lost"); - if (link && (info->flags & IS_DL10022)) { - /* Disable collision detection on full duplex links */ - outb((p & 0x0140) ? 4 : 0, nic_base + DLINK_DIAG); - } else if (link && (info->flags & IS_DL10019)) { - /* Disable collision detection on full duplex links */ - write_asic(dev->base_addr, 4, (p & 0x140) ? DL19FDUPLX : 0); - } - if (link) { - if (info->phy_id == info->eth_phy) { - if (p) - netdev_info(dev, "autonegotiation complete: " - "%sbaseT-%cD selected\n", - ((p & 0x0180) ? "100" : "10"), - ((p & 0x0140) ? 'F' : 'H')); - else - netdev_info(dev, "link partner did not autonegotiate\n"); - } - NS8390_init(dev, 1); - } - info->link_status = link; - } - if (info->pna_phy && time_after(jiffies, info->mii_reset + 6*HZ)) { - link = mdio_read(mii_addr, info->eth_phy, 1) & 0x0004; - if (((info->phy_id == info->pna_phy) && link) || - ((info->phy_id != info->pna_phy) && !link)) { - /* isolate this MII and try flipping to the other one */ - mdio_write(mii_addr, info->phy_id, 0, 0x0400); - info->phy_id ^= info->pna_phy ^ info->eth_phy; - netdev_info(dev, "switched to %s transceiver\n", - (info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); - mdio_write(mii_addr, info->phy_id, 0, - (info->phy_id == info->eth_phy) ? 0x1000 : 0); - info->link_status = 0; - info->mii_reset = jiffies; - } - } - -reschedule: - info->watchdog.expires = jiffies + HZ; - add_timer(&info->watchdog); -} - -/*====================================================================*/ - - -static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - pcnet_dev_t *info = PRIV(dev); - struct mii_ioctl_data *data = if_mii(rq); - unsigned int mii_addr = dev->base_addr + DLINK_GPIO; - - if (!(info->flags & (IS_DL10019|IS_DL10022))) - return -EINVAL; - - switch (cmd) { - case SIOCGMIIPHY: - data->phy_id = info->phy_id; - case SIOCGMIIREG: /* Read MII PHY register. */ - data->val_out = mdio_read(mii_addr, data->phy_id, data->reg_num & 0x1f); - return 0; - case SIOCSMIIREG: /* Write MII PHY register. */ - mdio_write(mii_addr, data->phy_id, data->reg_num & 0x1f, data->val_in); - return 0; - } - return -EOPNOTSUPP; -} - -/*====================================================================*/ - -static void dma_get_8390_hdr(struct net_device *dev, - struct e8390_pkt_hdr *hdr, - int ring_page) -{ - unsigned int nic_base = dev->base_addr; - - if (ei_status.dmaing) { - netdev_notice(dev, "DMAing conflict in dma_block_input." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); - return; - } - - ei_status.dmaing |= 0x01; - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD); - outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO); - outb_p(0, nic_base + EN0_RCNTHI); - outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */ - outb_p(ring_page, nic_base + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD); - - insw(nic_base + PCNET_DATAPORT, hdr, - sizeof(struct e8390_pkt_hdr)>>1); - /* Fix for big endian systems */ - hdr->count = le16_to_cpu(hdr->count); - - outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ - ei_status.dmaing &= ~0x01; -} - -/*====================================================================*/ - -static void dma_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset) -{ - unsigned int nic_base = dev->base_addr; - int xfer_count = count; - char *buf = skb->data; - - if ((ei_debug > 4) && (count != 4)) - netdev_dbg(dev, "[bi=%d]\n", count+4); - if (ei_status.dmaing) { - netdev_notice(dev, "DMAing conflict in dma_block_input." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); - return; - } - ei_status.dmaing |= 0x01; - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD); - outb_p(count & 0xff, nic_base + EN0_RCNTLO); - outb_p(count >> 8, nic_base + EN0_RCNTHI); - outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); - outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD); - - insw(nic_base + PCNET_DATAPORT,buf,count>>1); - if (count & 0x01) - buf[count-1] = inb(nic_base + PCNET_DATAPORT), xfer_count++; - - /* This was for the ALPHA version only, but enough people have been - encountering problems that it is still here. */ -#ifdef PCMCIA_DEBUG - if (ei_debug > 4) { /* DMA termination address check... */ - int addr, tries = 20; - do { - /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here - -- it's broken for Rx on some cards! */ - int high = inb_p(nic_base + EN0_RSARHI); - int low = inb_p(nic_base + EN0_RSARLO); - addr = (high << 8) + low; - if (((ring_offset + xfer_count) & 0xff) == (addr & 0xff)) - break; - } while (--tries > 0); - if (tries <= 0) - netdev_notice(dev, "RX transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - ring_offset + xfer_count, addr); - } -#endif - outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ - ei_status.dmaing &= ~0x01; -} /* dma_block_input */ - -/*====================================================================*/ - -static void dma_block_output(struct net_device *dev, int count, - const u_char *buf, const int start_page) -{ - unsigned int nic_base = dev->base_addr; - pcnet_dev_t *info = PRIV(dev); -#ifdef PCMCIA_DEBUG - int retries = 0; -#endif - u_long dma_start; - -#ifdef PCMCIA_DEBUG - if (ei_debug > 4) - netdev_dbg(dev, "[bo=%d]\n", count); -#endif - - /* Round the count up for word writes. Do we need to do this? - What effect will an odd byte count have on the 8390? - I should check someday. */ - if (count & 0x01) - count++; - if (ei_status.dmaing) { - netdev_notice(dev, "DMAing conflict in dma_block_output." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); - return; - } - ei_status.dmaing |= 0x01; - /* We should already be in page 0, but to be safe... */ - outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base+PCNET_CMD); - -#ifdef PCMCIA_DEBUG - retry: -#endif - - outb_p(ENISR_RDC, nic_base + EN0_ISR); - - /* Now the normal output. */ - outb_p(count & 0xff, nic_base + EN0_RCNTLO); - outb_p(count >> 8, nic_base + EN0_RCNTHI); - outb_p(0x00, nic_base + EN0_RSARLO); - outb_p(start_page, nic_base + EN0_RSARHI); - - outb_p(E8390_RWRITE+E8390_START, nic_base + PCNET_CMD); - outsw(nic_base + PCNET_DATAPORT, buf, count>>1); - - dma_start = jiffies; - -#ifdef PCMCIA_DEBUG - /* This was for the ALPHA version only, but enough people have been - encountering problems that it is still here. */ - if (ei_debug > 4) { /* DMA termination address check... */ - int addr, tries = 20; - do { - int high = inb_p(nic_base + EN0_RSARHI); - int low = inb_p(nic_base + EN0_RSARLO); - addr = (high << 8) + low; - if ((start_page << 8) + count == addr) - break; - } while (--tries > 0); - if (tries <= 0) { - netdev_notice(dev, "Tx packet transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - (start_page << 8) + count, addr); - if (retries++ == 0) - goto retry; - } - } -#endif - - while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) - if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) { - netdev_notice(dev, "timeout waiting for Tx RDC.\n"); - pcnet_reset_8390(dev); - NS8390_init(dev, 1); - break; - } - - outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ - if (info->flags & DELAY_OUTPUT) - udelay((long)delay_time); - ei_status.dmaing &= ~0x01; -} - -/*====================================================================*/ - -static int setup_dma_config(struct pcmcia_device *link, int start_pg, - int stop_pg) -{ - struct net_device *dev = link->priv; - - ei_status.tx_start_page = start_pg; - ei_status.rx_start_page = start_pg + TX_PAGES; - ei_status.stop_page = stop_pg; - - /* set up block i/o functions */ - ei_status.get_8390_hdr = dma_get_8390_hdr; - ei_status.block_input = dma_block_input; - ei_status.block_output = dma_block_output; - - return 0; -} - -/*====================================================================*/ - -static void copyin(void *dest, void __iomem *src, int c) -{ - u_short *d = dest; - u_short __iomem *s = src; - int odd; - - if (c <= 0) - return; - odd = (c & 1); c >>= 1; - - if (c) { - do { *d++ = __raw_readw(s++); } while (--c); - } - /* get last byte by fetching a word and masking */ - if (odd) - *((u_char *)d) = readw(s) & 0xff; -} - -static void copyout(void __iomem *dest, const void *src, int c) -{ - u_short __iomem *d = dest; - const u_short *s = src; - int odd; - - if (c <= 0) - return; - odd = (c & 1); c >>= 1; - - if (c) { - do { __raw_writew(*s++, d++); } while (--c); - } - /* copy last byte doing a read-modify-write */ - if (odd) - writew((readw(d) & 0xff00) | *(u_char *)s, d); -} - -/*====================================================================*/ - -static void shmem_get_8390_hdr(struct net_device *dev, - struct e8390_pkt_hdr *hdr, - int ring_page) -{ - void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8) - + (ring_page << 8) - - (ei_status.rx_start_page << 8); - - copyin(hdr, xfer_start, sizeof(struct e8390_pkt_hdr)); - /* Fix for big endian systems */ - hdr->count = le16_to_cpu(hdr->count); -} - -/*====================================================================*/ - -static void shmem_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset) -{ - void __iomem *base = ei_status.mem; - unsigned long offset = (TX_PAGES<<8) + ring_offset - - (ei_status.rx_start_page << 8); - char *buf = skb->data; - - if (offset + count > ei_status.priv) { - /* We must wrap the input move. */ - int semi_count = ei_status.priv - offset; - copyin(buf, base + offset, semi_count); - buf += semi_count; - offset = TX_PAGES<<8; - count -= semi_count; - } - copyin(buf, base + offset, count); -} - -/*====================================================================*/ - -static void shmem_block_output(struct net_device *dev, int count, - const u_char *buf, const int start_page) -{ - void __iomem *shmem = ei_status.mem + (start_page << 8); - shmem -= ei_status.tx_start_page << 8; - copyout(shmem, buf, count); -} - -/*====================================================================*/ - -static int setup_shmem_window(struct pcmcia_device *link, int start_pg, - int stop_pg, int cm_offset) -{ - struct net_device *dev = link->priv; - pcnet_dev_t *info = PRIV(dev); - int i, window_size, offset, ret; - - window_size = (stop_pg - start_pg) << 8; - if (window_size > 32 * 1024) - window_size = 32 * 1024; - - /* Make sure it's a power of two. */ - window_size = roundup_pow_of_two(window_size); - - /* Allocate a memory window */ - link->resource[3]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - link->resource[3]->flags |= WIN_USE_WAIT; - link->resource[3]->start = 0; link->resource[3]->end = window_size; - ret = pcmcia_request_window(link, link->resource[3], mem_speed); - if (ret) - goto failed; - - offset = (start_pg << 8) + cm_offset; - offset -= offset % window_size; - ret = pcmcia_map_mem_page(link, link->resource[3], offset); - if (ret) - goto failed; - - /* Try scribbling on the buffer */ - info->base = ioremap(link->resource[3]->start, - resource_size(link->resource[3])); - for (i = 0; i < (TX_PAGES<<8); i += 2) - __raw_writew((i>>1), info->base+offset+i); - udelay(100); - for (i = 0; i < (TX_PAGES<<8); i += 2) - if (__raw_readw(info->base+offset+i) != (i>>1)) break; - pcnet_reset_8390(dev); - if (i != (TX_PAGES<<8)) { - iounmap(info->base); - pcmcia_release_window(link, link->resource[3]); - info->base = NULL; - goto failed; - } - - ei_status.mem = info->base + offset; - ei_status.priv = resource_size(link->resource[3]); - dev->mem_start = (u_long)ei_status.mem; - dev->mem_end = dev->mem_start + resource_size(link->resource[3]); - - ei_status.tx_start_page = start_pg; - ei_status.rx_start_page = start_pg + TX_PAGES; - ei_status.stop_page = start_pg + ( - (resource_size(link->resource[3]) - offset) >> 8); - - /* set up block i/o functions */ - ei_status.get_8390_hdr = shmem_get_8390_hdr; - ei_status.block_input = shmem_block_input; - ei_status.block_output = shmem_block_output; - - info->flags |= USE_SHMEM; - return 0; - -failed: - return 1; -} - -/*====================================================================*/ - -static const struct pcmcia_device_id pcnet_ids[] = { - PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0057, 0x0021), - PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0104, 0x000a), - PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0xea15), - PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0x3341), - PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab), - PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101), - PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab), - PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), - PCMCIA_PFC_DEVICE_PROD_ID12(0, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), - PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), - PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), - PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), - PCMCIA_PFC_DEVICE_PROD_ID12(0, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), - PCMCIA_PFC_DEVICE_PROD_ID12(0, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), - PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), - PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), - PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), - PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), - PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), - PCMCIA_MFC_DEVICE_PROD_ID123(0, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), - PCMCIA_MFC_DEVICE_PROD_ID2(0, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), - PCMCIA_DEVICE_MANF_CARD(0x0057, 0x1004), - PCMCIA_DEVICE_MANF_CARD(0x0104, 0x000d), - PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0075), - PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145), - PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230), - PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530), - PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), - PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110), - PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041), - PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452), - PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300), - PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307), - PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a), - PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1103), - PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1121), - PCMCIA_DEVICE_PROD_ID12("2408LAN", "Ethernet", 0x352fff7f, 0x00b2e941), - PCMCIA_DEVICE_PROD_ID1234("Socket", "CF 10/100 Ethernet Card", "Revision B", "05/11/06", 0xb38bcc2e, 0x4de88352, 0xeaca6c8d, 0x7e57c22e), - PCMCIA_DEVICE_PROD_ID123("Cardwell", "PCMCIA", "ETHERNET", 0x9533672e, 0x281f1c5d, 0x3ff7175b), - PCMCIA_DEVICE_PROD_ID123("CNet ", "CN30BC", "ETHERNET", 0x9fe55d3d, 0x85601198, 0x3ff7175b), - PCMCIA_DEVICE_PROD_ID123("Digital", "Ethernet", "Adapter", 0x9999ab35, 0x00b2e941, 0x4b0d829e), - PCMCIA_DEVICE_PROD_ID123("Edimax Technology Inc.", "PCMCIA", "Ethernet Card", 0x738a0019, 0x281f1c5d, 0x5e9d92c0), - PCMCIA_DEVICE_PROD_ID123("EFA ", "EFA207", "ETHERNET", 0x3d294be4, 0xeb9aab6c, 0x3ff7175b), - PCMCIA_DEVICE_PROD_ID123("I-O DATA", "PCLA", "ETHERNET", 0x1d55d7ec, 0xe4c64d34, 0x3ff7175b), - PCMCIA_DEVICE_PROD_ID123("IO DATA", "PCLATE", "ETHERNET", 0x547e66dc, 0x6b260753, 0x3ff7175b), - PCMCIA_DEVICE_PROD_ID123("KingMax Technology Inc.", "EN10-T2", "PCMCIA Ethernet Card", 0x932b7189, 0x699e4436, 0x6f6652e0), - PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2216", 0x281f1c5d, 0xd4cd2f20, 0xb87add82), - PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2620", 0x281f1c5d, 0xd4cd2f20, 0x7d3d83a8), - PCMCIA_DEVICE_PROD_ID1("2412LAN", 0x67f236ab), - PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11), - PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff), - PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68), - PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997), - PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8), - PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96), - PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8010", 0x5070a7f9, 0x82f96e96), - PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8610", 0x5070a7f9, 0x86741224), - PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002", 0x93b15570, 0x75ec3efb), - PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002T", 0x93b15570, 0x461c5247), - PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8010", 0x93b15570, 0x82f96e96), - PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet", 0x578ba6e7, 0x0a9888c1), - PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet 10/100", 0x578ba6e7, 0x939fedbd), - PCMCIA_DEVICE_PROD_ID12("AROWANA", "PCMCIA Ethernet LAN Card", 0x313adbc8, 0x08d9f190), - PCMCIA_DEVICE_PROD_ID12("ASANTE", "FriendlyNet PC Card", 0x3a7ade0f, 0x41c64504), - PCMCIA_DEVICE_PROD_ID12("Billionton", "LNT-10TB", 0x552ab682, 0xeeb1ba6a), - PCMCIA_DEVICE_PROD_ID12("CF", "10Base-Ethernet", 0x44ebf863, 0x93ae4d79), - PCMCIA_DEVICE_PROD_ID12("CNet", "CN40BC Ethernet", 0xbc477dde, 0xfba775a7), - PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "BASEline PCMCIA 10 MBit Ethernetadapter", 0xfa2e424d, 0xe9190d8a), - PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet", 0xfa2e424d, 0x3953d9b9), - PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722), - PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2), - PCMCIA_DEVICE_PROD_ID12("corega", "Ether CF-TD", 0x0a21501a, 0x6589340a), - PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether CF-TD LAN Card", 0x5261440f, 0x8797663b), - PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd), - PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d), - PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d), - PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa), - PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-TD", 0x5261440f, 0x47d5ca83), - PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9), - PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2), - PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2), - PCMCIA_DEVICE_PROD_ID12("corega K.K.", "(CG-LAPCCTXD)", 0x5261440f, 0x73ec0d88), - PCMCIA_DEVICE_PROD_ID12("CouplerlessPCMCIA", "100BASE", 0xee5af0ad, 0x7c2add04), - PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-010", 0x77008979, 0x9d8d445d), - PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-110E 10/100M LAN Card", 0x77008979, 0xfd184814), - PCMCIA_DEVICE_PROD_ID12("DataTrek.", "NetCard ", 0x5cd66d9d, 0x84697ce0), - PCMCIA_DEVICE_PROD_ID12("Dayna Communications, Inc.", "CommuniCard E", 0x0c629325, 0xb4e7dbaf), - PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100", 0x697403d8, 0xe160b995), - PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100 Dongless", 0x697403d8, 0xa6d3b233), - PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e), - PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398), - PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b), - PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec), - PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9), - PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84), - PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9), - PCMCIA_DEVICE_PROD_ID12("Dynalink", "L10BC", 0x55632fd5, 0xdc65f2b1), - PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10BC", 0x6a26d1cf, 0xdc65f2b1), - PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10C", 0x6a26d1cf, 0xc4f84efb), - PCMCIA_DEVICE_PROD_ID12("E-CARD", "E-CARD", 0x6701da11, 0x6701da11), - PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet 10BaseT card", 0x53c864c6, 0xedd059f6), - PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet Combo card", 0x53c864c6, 0x929c486c), - PCMCIA_DEVICE_PROD_ID12("Ethernet", "Adapter", 0x00b2e941, 0x4b0d829e), - PCMCIA_DEVICE_PROD_ID12("Ethernet Adapter", "E2000 PCMCIA Ethernet", 0x96767301, 0x71fbbc61), - PCMCIA_DEVICE_PROD_ID12("Ethernet PCMCIA adapter", "EP-210", 0x8dd86181, 0xf2b52517), - PCMCIA_DEVICE_PROD_ID12("Fast Ethernet", "Adapter", 0xb4be14e3, 0x4b0d829e), - PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2000", 0x2a151fac, 0xf00555cb), - PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2220", 0x2a151fac, 0xc1b7e327), - PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947), - PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941), - PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6), - PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494), - PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b), - PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0), - PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956), - PCMCIA_DEVICE_PROD_ID12("KENTRONICS", "KEP-230", 0xaf8144c9, 0x868f6616), - PCMCIA_DEVICE_PROD_ID12("KCI", "PE520 PCMCIA Ethernet Adapter", 0xa89b87d3, 0x1eb88e64), - PCMCIA_DEVICE_PROD_ID12("KINGMAX", "EN10T2T", 0x7bcb459a, 0xa5c81fa5), - PCMCIA_DEVICE_PROD_ID12("Kingston", "KNE-PC2", 0x1128e633, 0xce2a89b3), - PCMCIA_DEVICE_PROD_ID12("Kingston Technology Corp.", "EtheRx PC Card Ethernet Adapter", 0x313c7be3, 0x0afb54a2), - PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-10/100CD", 0x1b7827b2, 0xcda71d1c), - PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDF", 0x1b7827b2, 0xfec71e40), - PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDL/T", 0x1b7827b2, 0x79fba4f7), - PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDS", 0x1b7827b2, 0x931afaab), - PCMCIA_DEVICE_PROD_ID12("LEMEL", "LM-N89TX PRO", 0xbbefb52f, 0xd2897a97), - PCMCIA_DEVICE_PROD_ID12("Linksys", "Combo PCMCIA EthernetCard (EC2T)", 0x0733cc81, 0x32ee8c78), - PCMCIA_DEVICE_PROD_ID12("LINKSYS", "E-CARD", 0xf7cb0b07, 0x6701da11), - PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d), - PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389), - PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9), - PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a), - PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737), - PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TE", 0x88fcdeda, 0x0e714bee), - PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922), - PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN10TE", 0x88fcdeda, 0xc1e2521c), - PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0), - PCMCIA_DEVICE_PROD_ID12("MACNICA", "ME1-JEIDA", 0x20841b68, 0xaf8a3578), - PCMCIA_DEVICE_PROD_ID12("Macsense", "MPC-10", 0xd830297f, 0xd265c307), - PCMCIA_DEVICE_PROD_ID12("Matsushita Electric Industrial Co.,LTD.", "CF-VEL211", 0x44445376, 0x8ded41d4), - PCMCIA_DEVICE_PROD_ID12("MAXTECH", "PCN2000", 0x78d64bc0, 0xca0ca4b8), - PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-T", 0x481e0094, 0xa2eb0cf3), - PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-TX", 0x481e0094, 0x41a6916c), - PCMCIA_DEVICE_PROD_ID12("Microcom C.E.", "Travel Card LAN 10/100", 0x4b91cec7, 0xe70220d6), - PCMCIA_DEVICE_PROD_ID12("Microdyne", "NE4200", 0x2e6da59b, 0x0478e472), - PCMCIA_DEVICE_PROD_ID12("MIDORI ELEC.", "LT-PCMT", 0x648d55c1, 0xbde526c7), - PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover 4100", 0x36e1191f, 0x60c229b9), - PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8), - PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76), - PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e), - PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f), - PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet", 0x281f1c5d, 0x00b2e941), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET", 0x281f1c5d, 0x3ff7175b), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet 10BaseT Card", 0x281f1c5d, 0x4de2f6c8), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Card", 0x281f1c5d, 0x5e9d92c0), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Combo card", 0x281f1c5d, 0x929c486c), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET V1.0", 0x281f1c5d, 0x4d8817c8), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEthernet", 0x281f1c5d, 0xfe871eeb), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast-Ethernet", 0x281f1c5d, 0x45f1f3b4), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FAST ETHERNET CARD", 0x281f1c5d, 0xec5dbca7), - PCMCIA_DEVICE_PROD_ID12("PCMCIA LAN", "Ethernet", 0x7500e246, 0x00b2e941), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "LNT-10TN", 0x281f1c5d, 0xe707f641), - PCMCIA_DEVICE_PROD_ID12("PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", "UE2212", 0x281f1c5d, 0xbf17199b), - PCMCIA_DEVICE_PROD_ID12("PCMCIA", " Ethernet NE2000 Compatible", 0x281f1c5d, 0x42d5d7e1), - PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10baseT 3.3V", 0xebf91155, 0x30074c80), - PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50), - PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110), - PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941), - PCMCIA_DEVICE_PROD_ID12("RIOS Systems Co.", "PC CARD3 ETHERNET", 0x7dd33481, 0x10b41826), - PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df), - PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0), - PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd), - PCMCIA_DEVICE_PROD_ID12("RPTI LTD.", "EP400", 0xc53ac515, 0x81e39388), - PCMCIA_DEVICE_PROD_ID12("SCM", "Ethernet Combo card", 0xbdc3b102, 0x929c486c), - PCMCIA_DEVICE_PROD_ID12("Seiko Epson Corp.", "Ethernet", 0x09928730, 0x00b2e941), - PCMCIA_DEVICE_PROD_ID12("SMC", "EZCard-10-PCMCIA", 0xc4f8b18b, 0xfb21d265), - PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision D", 0xc70a4760, 0x2ade483e), - PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision E", 0xc70a4760, 0x5dd978a8), - PCMCIA_DEVICE_PROD_ID12("TDK", "LAK-CD031 for PCMCIA", 0x1eae9475, 0x0ed386fa), - PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE450T", 0x466b05f0, 0x8b74bc4f), - PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE550T", 0x466b05f0, 0x33c8db2a), - PCMCIA_DEVICE_PROD_ID13("Hypertec", "EP401", 0x8787bec7, 0xf6e4a31e), - PCMCIA_DEVICE_PROD_ID13("KingMax Technology Inc.", "Ethernet Card", 0x932b7189, 0x5e9d92c0), - PCMCIA_DEVICE_PROD_ID13("LONGSHINE", "EP401", 0xf866b0b0, 0xf6e4a31e), - PCMCIA_DEVICE_PROD_ID13("Xircom", "CFE-10", 0x2e3ee845, 0x22a49f89), - PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360), - PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de), - PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f), - PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a), - PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078), - /* too generic! */ - /* PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100 Ethernet Card", 0x281f1c5d, 0x11b0ffc0), */ - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), - PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("Allied Telesis,K.K", "Ethernet LAN Card", 0x2ad62f3c, 0x9fd2f0a2, "cis/LA-PCM.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "cis/PE520.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"), - PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b), - PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0", - 0xb4be14e3, 0x43ac239b, 0x0877b627), - PCMCIA_DEVICE_NULL -}; -MODULE_DEVICE_TABLE(pcmcia, pcnet_ids); -MODULE_FIRMWARE("cis/PCMLM28.cis"); -MODULE_FIRMWARE("cis/DP83903.cis"); -MODULE_FIRMWARE("cis/LA-PCM.cis"); -MODULE_FIRMWARE("cis/PE520.cis"); -MODULE_FIRMWARE("cis/NE2K.cis"); -MODULE_FIRMWARE("cis/PE-200.cis"); -MODULE_FIRMWARE("cis/tamarack.cis"); - -static struct pcmcia_driver pcnet_driver = { - .name = "pcnet_cs", - .probe = pcnet_probe, - .remove = pcnet_detach, - .owner = THIS_MODULE, - .id_table = pcnet_ids, - .suspend = pcnet_suspend, - .resume = pcnet_resume, -}; - -static int __init init_pcnet_cs(void) -{ - return pcmcia_register_driver(&pcnet_driver); -} - -static void __exit exit_pcnet_cs(void) -{ - pcmcia_unregister_driver(&pcnet_driver); -} - -module_init(init_pcnet_cs); -module_exit(exit_pcnet_cs); |