brcm80211: fmac: abstract bus_stop interface function pointer

Common layer should use interface function pointer stored in
brcmf_bus to invoke corresponding interface function in bus layer.
This patch is part of the fullmac bus interface refactoring.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 83 insertions, 81 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 129cfd6bc68..7817ededcf7 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -2303,6 +2303,87 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 	return cnt;
 }
 
+static void brcmf_sdbrcm_bus_stop(struct device *dev)
+{
+	u32 local_hostintmask;
+	u8 saveclk;
+	uint retries;
+	int err;
+	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv;
+	struct brcmf_sdio *bus = sdiodev->bus;
+
+	brcmf_dbg(TRACE, "Enter\n");
+
+	if (bus->watchdog_tsk) {
+		send_sig(SIGTERM, bus->watchdog_tsk, 1);
+		kthread_stop(bus->watchdog_tsk);
+		bus->watchdog_tsk = NULL;
+	}
+
+	if (bus->dpc_tsk && bus->dpc_tsk != current) {
+		send_sig(SIGTERM, bus->dpc_tsk, 1);
+		kthread_stop(bus->dpc_tsk);
+		bus->dpc_tsk = NULL;
+	}
+
+	down(&bus->sdsem);
+
+	bus_wake(bus);
+
+	/* Enable clock for device interrupts */
+	brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
+
+	/* Disable and clear interrupts at the chip level also */
+	w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask), &retries);
+	local_hostintmask = bus->hostintmask;
+	bus->hostintmask = 0;
+
+	/* Change our idea of bus state */
+	bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
+
+	/* Force clocks on backplane to be sure F2 interrupt propagates */
+	saveclk = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
+					SBSDIO_FUNC1_CHIPCLKCSR, &err);
+	if (!err) {
+		brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
+				       SBSDIO_FUNC1_CHIPCLKCSR,
+				       (saveclk | SBSDIO_FORCE_HT), &err);
+	}
+	if (err)
+		brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err);
+
+	/* Turn off the bus (F2), free any pending packets */
+	brcmf_dbg(INTR, "disable SDIO interrupts\n");
+	brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx,
+			 SDIO_FUNC_ENABLE_1, NULL);
+
+	/* Clear any pending interrupts now that F2 is disabled */
+	w_sdreg32(bus, local_hostintmask,
+		  offsetof(struct sdpcmd_regs, intstatus), &retries);
+
+	/* Turn off the backplane clock (only) */
+	brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
+
+	/* Clear the data packet queues */
+	brcmu_pktq_flush(&bus->txq, true, NULL, NULL);
+
+	/* Clear any held glomming stuff */
+	if (bus->glomd)
+		brcmu_pkt_buf_free_skb(bus->glomd);
+	brcmf_sdbrcm_free_glom(bus);
+
+	/* Clear rx control and wake any waiters */
+	bus->rxlen = 0;
+	brcmf_sdbrcm_dcmd_resp_wake(bus);
+
+	/* Reset some F2 state stuff */
+	bus->rxskip = false;
+	bus->tx_seq = bus->rx_seq = 0;
+
+	up(&bus->sdsem);
+}
+
 static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 {
 	u32 intstatus, newstatus = 0;
@@ -3342,87 +3423,6 @@ brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus)
 	return ret;
 }
 
-void brcmf_sdbrcm_bus_stop(struct device *dev)
-{
-	u32 local_hostintmask;
-	u8 saveclk;
-	uint retries;
-	int err;
-	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv;
-	struct brcmf_sdio *bus = sdiodev->bus;
-
-	brcmf_dbg(TRACE, "Enter\n");
-
-	if (bus->watchdog_tsk) {
-		send_sig(SIGTERM, bus->watchdog_tsk, 1);
-		kthread_stop(bus->watchdog_tsk);
-		bus->watchdog_tsk = NULL;
-	}
-
-	if (bus->dpc_tsk && bus->dpc_tsk != current) {
-		send_sig(SIGTERM, bus->dpc_tsk, 1);
-		kthread_stop(bus->dpc_tsk);
-		bus->dpc_tsk = NULL;
-	}
-
-	down(&bus->sdsem);
-
-	bus_wake(bus);
-
-	/* Enable clock for device interrupts */
-	brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
-
-	/* Disable and clear interrupts at the chip level also */
-	w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask), &retries);
-	local_hostintmask = bus->hostintmask;
-	bus->hostintmask = 0;
-
-	/* Change our idea of bus state */
-	bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
-
-	/* Force clocks on backplane to be sure F2 interrupt propagates */
-	saveclk = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
-					SBSDIO_FUNC1_CHIPCLKCSR, &err);
-	if (!err) {
-		brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-				       SBSDIO_FUNC1_CHIPCLKCSR,
-				       (saveclk | SBSDIO_FORCE_HT), &err);
-	}
-	if (err)
-		brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err);
-
-	/* Turn off the bus (F2), free any pending packets */
-	brcmf_dbg(INTR, "disable SDIO interrupts\n");
-	brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx,
-			 SDIO_FUNC_ENABLE_1, NULL);
-
-	/* Clear any pending interrupts now that F2 is disabled */
-	w_sdreg32(bus, local_hostintmask,
-		  offsetof(struct sdpcmd_regs, intstatus), &retries);
-
-	/* Turn off the backplane clock (only) */
-	brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
-
-	/* Clear the data packet queues */
-	brcmu_pktq_flush(&bus->txq, true, NULL, NULL);
-
-	/* Clear any held glomming stuff */
-	if (bus->glomd)
-		brcmu_pkt_buf_free_skb(bus->glomd);
-	brcmf_sdbrcm_free_glom(bus);
-
-	/* Clear rx control and wake any waiters */
-	bus->rxlen = 0;
-	brcmf_sdbrcm_dcmd_resp_wake(bus);
-
-	/* Reset some F2 state stuff */
-	bus->rxskip = false;
-	bus->tx_seq = bus->rx_seq = 0;
-
-	up(&bus->sdsem);
-}
-
 int brcmf_sdbrcm_bus_init(struct device *dev)
 {
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
@@ -3952,6 +3952,8 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
 		bus->dpc_tsk = NULL;
 	}
 
+	/* Assign bus interface call back */
+	bus->sdiodev->bus_if->brcmf_bus_stop = brcmf_sdbrcm_bus_stop;
 	/* Attach to the brcmf/OS/network interface */
 	ret = brcmf_attach(SDPCM_RESERVE, bus->sdiodev->dev);
 	if (ret != 0) {