summaryrefslogtreecommitdiff
path: root/drivers/parisc/eisa.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/parisc/eisa.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/parisc/eisa.c')
-rw-r--r--drivers/parisc/eisa.c464
1 files changed, 464 insertions, 0 deletions
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
new file mode 100644
index 00000000000..043d47aea75
--- /dev/null
+++ b/drivers/parisc/eisa.c
@@ -0,0 +1,464 @@
+/*
+ * eisa.c - provide support for EISA adapters in PA-RISC machines
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Copyright (c) 2001 Matthew Wilcox for Hewlett Packard
+ * Copyright (c) 2001 Daniel Engstrom <5116@telia.com>
+ *
+ * There are two distinct EISA adapters. Mongoose is found in machines
+ * before the 712; then the Wax ASIC is used. To complicate matters, the
+ * Wax ASIC also includes a PS/2 and RS-232 controller, but those are
+ * dealt with elsewhere; this file is concerned only with the EISA portions
+ * of Wax.
+ *
+ *
+ * HINT:
+ * -----
+ * To allow an ISA card to work properly in the EISA slot you need to
+ * set an edge trigger level. This may be done on the palo command line
+ * by adding the kernel parameter "eisa_irq_edge=n,n2,[...]]", with
+ * n and n2 as the irq levels you want to use.
+ *
+ * Example: "eisa_irq_edge=10,11" allows ISA cards to operate at
+ * irq levels 10 and 11.
+ */
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/eisa.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/processor.h>
+#include <asm/parisc-device.h>
+#include <asm/delay.h>
+#include <asm/eisa_bus.h>
+#include <asm/eisa_eeprom.h>
+
+#if 0
+#define EISA_DBG(msg, arg... ) printk(KERN_DEBUG "eisa: " msg , ## arg )
+#else
+#define EISA_DBG(msg, arg... )
+#endif
+
+#define SNAKES_EEPROM_BASE_ADDR 0xF0810400
+#define MIRAGE_EEPROM_BASE_ADDR 0xF00C0400
+
+static DEFINE_SPINLOCK(eisa_irq_lock);
+
+void __iomem *eisa_eeprom_addr;
+
+/* We can only have one EISA adapter in the system because neither
+ * implementation can be flexed.
+ */
+static struct eisa_ba {
+ struct pci_hba_data hba;
+ unsigned long eeprom_addr;
+ struct eisa_root_device root;
+} eisa_dev;
+
+/* Port ops */
+
+static inline unsigned long eisa_permute(unsigned short port)
+{
+ if (port & 0x300) {
+ return 0xfc000000 | ((port & 0xfc00) >> 6)
+ | ((port & 0x3f8) << 9) | (port & 7);
+ } else {
+ return 0xfc000000 | port;
+ }
+}
+
+unsigned char eisa_in8(unsigned short port)
+{
+ if (EISA_bus)
+ return gsc_readb(eisa_permute(port));
+ return 0xff;
+}
+
+unsigned short eisa_in16(unsigned short port)
+{
+ if (EISA_bus)
+ return le16_to_cpu(gsc_readw(eisa_permute(port)));
+ return 0xffff;
+}
+
+unsigned int eisa_in32(unsigned short port)
+{
+ if (EISA_bus)
+ return le32_to_cpu(gsc_readl(eisa_permute(port)));
+ return 0xffffffff;
+}
+
+void eisa_out8(unsigned char data, unsigned short port)
+{
+ if (EISA_bus)
+ gsc_writeb(data, eisa_permute(port));
+}
+
+void eisa_out16(unsigned short data, unsigned short port)
+{
+ if (EISA_bus)
+ gsc_writew(cpu_to_le16(data), eisa_permute(port));
+}
+
+void eisa_out32(unsigned int data, unsigned short port)
+{
+ if (EISA_bus)
+ gsc_writel(cpu_to_le32(data), eisa_permute(port));
+}
+
+#ifndef CONFIG_PCI
+/* We call these directly without PCI. See asm/io.h. */
+EXPORT_SYMBOL(eisa_in8);
+EXPORT_SYMBOL(eisa_in16);
+EXPORT_SYMBOL(eisa_in32);
+EXPORT_SYMBOL(eisa_out8);
+EXPORT_SYMBOL(eisa_out16);
+EXPORT_SYMBOL(eisa_out32);
+#endif
+
+/* Interrupt handling */
+
+/* cached interrupt mask registers */
+static int master_mask;
+static int slave_mask;
+
+/* the trig level can be set with the
+ * eisa_irq_edge=n,n,n commandline parameter
+ * We should really read this from the EEPROM
+ * in the furure.
+ */
+/* irq 13,8,2,1,0 must be edge */
+static unsigned int eisa_irq_level; /* default to edge triggered */
+
+
+/* called by free irq */
+static void eisa_disable_irq(unsigned int irq)
+{
+ unsigned long flags;
+
+ EISA_DBG("disable irq %d\n", irq);
+ /* just mask for now */
+ spin_lock_irqsave(&eisa_irq_lock, flags);
+ if (irq & 8) {
+ slave_mask |= (1 << (irq&7));
+ eisa_out8(slave_mask, 0xa1);
+ } else {
+ master_mask |= (1 << (irq&7));
+ eisa_out8(master_mask, 0x21);
+ }
+ spin_unlock_irqrestore(&eisa_irq_lock, flags);
+ EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
+ EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
+}
+
+/* called by request irq */
+static void eisa_enable_irq(unsigned int irq)
+{
+ unsigned long flags;
+ EISA_DBG("enable irq %d\n", irq);
+
+ spin_lock_irqsave(&eisa_irq_lock, flags);
+ if (irq & 8) {
+ slave_mask &= ~(1 << (irq&7));
+ eisa_out8(slave_mask, 0xa1);
+ } else {
+ master_mask &= ~(1 << (irq&7));
+ eisa_out8(master_mask, 0x21);
+ }
+ spin_unlock_irqrestore(&eisa_irq_lock, flags);
+ EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
+ EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
+}
+
+static unsigned int eisa_startup_irq(unsigned int irq)
+{
+ eisa_enable_irq(irq);
+ return 0;
+}
+
+static struct hw_interrupt_type eisa_interrupt_type = {
+ .typename = "EISA",
+ .startup = eisa_startup_irq,
+ .shutdown = eisa_disable_irq,
+ .enable = eisa_enable_irq,
+ .disable = eisa_disable_irq,
+ .ack = no_ack_irq,
+ .end = no_end_irq,
+};
+
+static irqreturn_t eisa_irq(int wax_irq, void *intr_dev, struct pt_regs *regs)
+{
+ int irq = gsc_readb(0xfc01f000); /* EISA supports 16 irqs */
+ unsigned long flags;
+
+ spin_lock_irqsave(&eisa_irq_lock, flags);
+ /* read IRR command */
+ eisa_out8(0x0a, 0x20);
+ eisa_out8(0x0a, 0xa0);
+
+ EISA_DBG("irq IAR %02x 8259-1 irr %02x 8259-2 irr %02x\n",
+ irq, eisa_in8(0x20), eisa_in8(0xa0));
+
+ /* read ISR command */
+ eisa_out8(0x0a, 0x20);
+ eisa_out8(0x0a, 0xa0);
+ EISA_DBG("irq 8259-1 isr %02x imr %02x 8259-2 isr %02x imr %02x\n",
+ eisa_in8(0x20), eisa_in8(0x21), eisa_in8(0xa0), eisa_in8(0xa1));
+
+ irq &= 0xf;
+
+ /* mask irq and write eoi */
+ if (irq & 8) {
+ slave_mask |= (1 << (irq&7));
+ eisa_out8(slave_mask, 0xa1);
+ eisa_out8(0x60 | (irq&7),0xa0);/* 'Specific EOI' to slave */
+ eisa_out8(0x62,0x20); /* 'Specific EOI' to master-IRQ2 */
+
+ } else {
+ master_mask |= (1 << (irq&7));
+ eisa_out8(master_mask, 0x21);
+ eisa_out8(0x60|irq,0x20); /* 'Specific EOI' to master */
+ }
+ spin_unlock_irqrestore(&eisa_irq_lock, flags);
+
+ __do_IRQ(irq, regs);
+
+ spin_lock_irqsave(&eisa_irq_lock, flags);
+ /* unmask */
+ if (irq & 8) {
+ slave_mask &= ~(1 << (irq&7));
+ eisa_out8(slave_mask, 0xa1);
+ } else {
+ master_mask &= ~(1 << (irq&7));
+ eisa_out8(master_mask, 0x21);
+ }
+ spin_unlock_irqrestore(&eisa_irq_lock, flags);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t dummy_irq2_handler(int _, void *dev, struct pt_regs *regs)
+{
+ printk(KERN_ALERT "eisa: uhh, irq2?\n");
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq2_action = {
+ .handler = dummy_irq2_handler,
+ .name = "cascade",
+};
+
+static void init_eisa_pic(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&eisa_irq_lock, flags);
+
+ eisa_out8(0xff, 0x21); /* mask during init */
+ eisa_out8(0xff, 0xa1); /* mask during init */
+
+ /* master pic */
+ eisa_out8(0x11,0x20); /* ICW1 */
+ eisa_out8(0x00,0x21); /* ICW2 */
+ eisa_out8(0x04,0x21); /* ICW3 */
+ eisa_out8(0x01,0x21); /* ICW4 */
+ eisa_out8(0x40,0x20); /* OCW2 */
+
+ /* slave pic */
+ eisa_out8(0x11,0xa0); /* ICW1 */
+ eisa_out8(0x08,0xa1); /* ICW2 */
+ eisa_out8(0x02,0xa1); /* ICW3 */
+ eisa_out8(0x01,0xa1); /* ICW4 */
+ eisa_out8(0x40,0xa0); /* OCW2 */
+
+ udelay(100);
+
+ slave_mask = 0xff;
+ master_mask = 0xfb;
+ eisa_out8(slave_mask, 0xa1); /* OCW1 */
+ eisa_out8(master_mask, 0x21); /* OCW1 */
+
+ /* setup trig level */
+ EISA_DBG("EISA edge/level %04x\n", eisa_irq_level);
+
+ eisa_out8(eisa_irq_level&0xff, 0x4d0); /* Set all irq's to edge */
+ eisa_out8((eisa_irq_level >> 8) & 0xff, 0x4d1);
+
+ EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
+ EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
+ EISA_DBG("pic0 edge/level %02x\n", eisa_in8(0x4d0));
+ EISA_DBG("pic1 edge/level %02x\n", eisa_in8(0x4d1));
+
+ spin_unlock_irqrestore(&eisa_irq_lock, flags);
+}
+
+/* Device initialisation */
+
+#define is_mongoose(dev) (dev->id.sversion == 0x00076)
+
+static int __devinit eisa_probe(struct parisc_device *dev)
+{
+ int i, result;
+
+ char *name = is_mongoose(dev) ? "Mongoose" : "Wax";
+
+ printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n",
+ name, dev->hpa);
+
+ eisa_dev.hba.dev = dev;
+ eisa_dev.hba.iommu = ccio_get_iommu(dev);
+
+ eisa_dev.hba.lmmio_space.name = "EISA";
+ eisa_dev.hba.lmmio_space.start = F_EXTEND(0xfc000000);
+ eisa_dev.hba.lmmio_space.end = F_EXTEND(0xffbfffff);
+ eisa_dev.hba.lmmio_space.flags = IORESOURCE_MEM;
+ result = ccio_request_resource(dev, &eisa_dev.hba.lmmio_space);
+ if (result < 0) {
+ printk(KERN_ERR "EISA: failed to claim EISA Bus address space!\n");
+ return result;
+ }
+ eisa_dev.hba.io_space.name = "EISA";
+ eisa_dev.hba.io_space.start = 0;
+ eisa_dev.hba.io_space.end = 0xffff;
+ eisa_dev.hba.lmmio_space.flags = IORESOURCE_IO;
+ result = request_resource(&ioport_resource, &eisa_dev.hba.io_space);
+ if (result < 0) {
+ printk(KERN_ERR "EISA: failed to claim EISA Bus port space!\n");
+ return result;
+ }
+ pcibios_register_hba(&eisa_dev.hba);
+
+ result = request_irq(dev->irq, eisa_irq, SA_SHIRQ, "EISA", &eisa_dev);
+ if (result) {
+ printk(KERN_ERR "EISA: request_irq failed!\n");
+ return result;
+ }
+
+ /* Reserve IRQ2 */
+ irq_desc[2].action = &irq2_action;
+
+ for (i = 0; i < 16; i++) {
+ irq_desc[i].handler = &eisa_interrupt_type;
+ }
+
+ EISA_bus = 1;
+
+ if (dev->num_addrs) {
+ /* newer firmware hand out the eeprom address */
+ eisa_dev.eeprom_addr = dev->addr[0];
+ } else {
+ /* old firmware, need to figure out the box */
+ if (is_mongoose(dev)) {
+ eisa_dev.eeprom_addr = SNAKES_EEPROM_BASE_ADDR;
+ } else {
+ eisa_dev.eeprom_addr = MIRAGE_EEPROM_BASE_ADDR;
+ }
+ }
+ eisa_eeprom_addr = ioremap(eisa_dev.eeprom_addr, HPEE_MAX_LENGTH);
+ result = eisa_enumerator(eisa_dev.eeprom_addr, &eisa_dev.hba.io_space,
+ &eisa_dev.hba.lmmio_space);
+ init_eisa_pic();
+
+ if (result >= 0) {
+ /* FIXME : Don't enumerate the bus twice. */
+ eisa_dev.root.dev = &dev->dev;
+ dev->dev.driver_data = &eisa_dev.root;
+ eisa_dev.root.bus_base_addr = 0;
+ eisa_dev.root.res = &eisa_dev.hba.io_space;
+ eisa_dev.root.slots = result;
+ eisa_dev.root.dma_mask = 0xffffffff; /* wild guess */
+ if (eisa_root_register (&eisa_dev.root)) {
+ printk(KERN_ERR "EISA: Failed to register EISA root\n");
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static struct parisc_device_id eisa_tbl[] = {
+ { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00076 }, /* Mongoose */
+ { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00090 }, /* Wax EISA */
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(parisc, eisa_tbl);
+
+static struct parisc_driver eisa_driver = {
+ .name = "EISA Bus Adapter",
+ .id_table = eisa_tbl,
+ .probe = eisa_probe,
+};
+
+void __init eisa_init(void)
+{
+ register_parisc_driver(&eisa_driver);
+}
+
+
+static unsigned int eisa_irq_configured;
+void eisa_make_irq_level(int num)
+{
+ if (eisa_irq_configured& (1<<num)) {
+ printk(KERN_WARNING
+ "IRQ %d polarity configured twice (last to level)\n",
+ num);
+ }
+ eisa_irq_level |= (1<<num); /* set the corresponding bit */
+ eisa_irq_configured |= (1<<num); /* set the corresponding bit */
+}
+
+void eisa_make_irq_edge(int num)
+{
+ if (eisa_irq_configured& (1<<num)) {
+ printk(KERN_WARNING
+ "IRQ %d polarity configured twice (last to edge)\n",
+ num);
+ }
+ eisa_irq_level &= ~(1<<num); /* clear the corresponding bit */
+ eisa_irq_configured |= (1<<num); /* set the corresponding bit */
+}
+
+static int __init eisa_irq_setup(char *str)
+{
+ char *cur = str;
+ int val;
+
+ EISA_DBG("IRQ setup\n");
+ while (cur != NULL) {
+ char *pe;
+
+ val = (int) simple_strtoul(cur, &pe, 0);
+ if (val > 15 || val < 0) {
+ printk(KERN_ERR "eisa: EISA irq value are 0-15\n");
+ continue;
+ }
+ if (val == 2) {
+ val = 9;
+ }
+ eisa_make_irq_edge(val); /* clear the corresponding bit */
+ EISA_DBG("setting IRQ %d to edge-triggered mode\n", val);
+
+ if ((cur = strchr(cur, ','))) {
+ cur++;
+ } else {
+ break;
+ }
+ }
+ return 1;
+}
+
+__setup("eisa_irq_edge=", eisa_irq_setup);
+