summaryrefslogtreecommitdiff
path: root/drivers/regulator
diff options
context:
space:
mode:
authorMark Brown <broonie@opensource.wolfsonmicro.com>2010-12-12 14:36:17 +0000
committerLiam Girdwood <lrg@slimlogic.co.uk>2011-01-12 14:33:04 +0000
commite8eef82b2c652d031bee9dff9762325672f5a1e0 (patch)
treeb4c69b01c190e5e5a285a46dd4b26e4c801ddaa2 /drivers/regulator
parent757902513019e6ee469791ff76f954b19ca8d036 (diff)
regulator: Provide a selector based set_voltage_sel() operation
Many regulator drivers implement voltage setting by looping through a table of possible values, normally because the set of available voltages can't be mapped onto selectors with simple calcuation. Factor out these loops by providing a variant of set_voltage() which takes a selector rather than a voltage range as an argument and implementing a loop through the available selectors in the core. This is not going to be suitable for use with all devices as when the regulator voltage can be mapped onto selector values with a simple calculation the linear scan through the available values will be more expensive than just doing the calculation, especially for regulators that provide fine grained voltage control. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Diffstat (limited to 'drivers/regulator')
-rw-r--r--drivers/regulator/core.c37
1 files changed, 35 insertions, 2 deletions
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 23c5f7c80bf..a0579f06900 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1637,6 +1637,32 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
selector);
else
selector = -1;
+ } else if (rdev->desc->ops->set_voltage_sel) {
+ int best_val = INT_MAX;
+ int i;
+
+ selector = 0;
+
+ /* Find the smallest voltage that falls within the specified
+ * range.
+ */
+ for (i = 0; i < rdev->desc->n_voltages; i++) {
+ ret = rdev->desc->ops->list_voltage(rdev, i);
+ if (ret < 0)
+ continue;
+
+ if (ret < best_val && ret >= min_uV && ret <= max_uV) {
+ best_val = ret;
+ selector = i;
+ }
+ }
+
+ if (best_val != INT_MAX) {
+ ret = rdev->desc->ops->set_voltage_sel(rdev, selector);
+ selector = best_val;
+ } else {
+ ret = -EINVAL;
+ }
} else {
ret = -EINVAL;
}
@@ -1672,7 +1698,8 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
mutex_lock(&rdev->mutex);
/* sanity check */
- if (!rdev->desc->ops->set_voltage) {
+ if (!rdev->desc->ops->set_voltage &&
+ !rdev->desc->ops->set_voltage_sel) {
ret = -EINVAL;
goto out;
}
@@ -2256,7 +2283,7 @@ static int add_regulator_attributes(struct regulator_dev *rdev)
return status;
/* constraints need specific supporting methods */
- if (ops->set_voltage) {
+ if (ops->set_voltage || ops->set_voltage_sel) {
status = device_create_file(dev, &dev_attr_min_microvolts);
if (status < 0)
return status;
@@ -2354,12 +2381,18 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
/* Only one of each should be implemented */
WARN_ON(regulator_desc->ops->get_voltage &&
regulator_desc->ops->get_voltage_sel);
+ WARN_ON(regulator_desc->ops->set_voltage &&
+ regulator_desc->ops->set_voltage_sel);
/* If we're using selectors we must implement list_voltage. */
if (regulator_desc->ops->get_voltage_sel &&
!regulator_desc->ops->list_voltage) {
return ERR_PTR(-EINVAL);
}
+ if (regulator_desc->ops->set_voltage_sel &&
+ !regulator_desc->ops->list_voltage) {
+ return ERR_PTR(-EINVAL);
+ }
rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL);
if (rdev == NULL)