Merge branch 'upstream/linaro-3.1' into linaro-android-3.1-agreen-rebase

Conflicts:
	arch/arm/kernel/entry-armv.S
	arch/arm/vfp/vfpmodule.c
	kernel/power/Kconfig

14 files changed, 86 insertions, 40 deletions

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0599854e221..118ec12d2d5 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -34,8 +34,8 @@ struct gpio_bank {
 	u16 irq;
 	u16 virtual_irq_start;
 	int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
 	u32 suspend_wakeup;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
 	u32 saved_wakeup;
 #endif
 	u32 non_wakeup_gpios;
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index c43b8ff626a..0550dcb8581 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -577,6 +577,7 @@ pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
 void
 pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
 {
+	*gpio_base = -1;
 }
 #endif
 
diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c
index e88c64417a8..14cc88aaf3a 100644
--- a/drivers/gpu/drm/radeon/atom.c
+++ b/drivers/gpu/drm/radeon/atom.c
@@ -277,7 +277,12 @@ static uint32_t atom_get_src_int(atom_exec_context *ctx, uint8_t attr,
 	case ATOM_ARG_FB:
 		idx = U8(*ptr);
 		(*ptr)++;
-		val = gctx->scratch[((gctx->fb_base + idx) / 4)];
+		if ((gctx->fb_base + (idx * 4)) > gctx->scratch_size_bytes) {
+			DRM_ERROR("ATOM: fb read beyond scratch region: %d vs. %d\n",
+				  gctx->fb_base + (idx * 4), gctx->scratch_size_bytes);
+			val = 0;
+		} else
+			val = gctx->scratch[(gctx->fb_base / 4) + idx];
 		if (print)
 			DEBUG("FB[0x%02X]", idx);
 		break;
@@ -531,7 +536,11 @@ static void atom_put_dst(atom_exec_context *ctx, int arg, uint8_t attr,
 	case ATOM_ARG_FB:
 		idx = U8(*ptr);
 		(*ptr)++;
-		gctx->scratch[((gctx->fb_base + idx) / 4)] = val;
+		if ((gctx->fb_base + (idx * 4)) > gctx->scratch_size_bytes) {
+			DRM_ERROR("ATOM: fb write beyond scratch region: %d vs. %d\n",
+				  gctx->fb_base + (idx * 4), gctx->scratch_size_bytes);
+		} else
+			gctx->scratch[(gctx->fb_base / 4) + idx] = val;
 		DEBUG("FB[0x%02X]", idx);
 		break;
 	case ATOM_ARG_PLL:
@@ -1370,11 +1379,13 @@ int atom_allocate_fb_scratch(struct atom_context *ctx)
 
 		usage_bytes = firmware_usage->asFirmwareVramReserveInfo[0].usFirmwareUseInKb * 1024;
 	}
+	ctx->scratch_size_bytes = 0;
 	if (usage_bytes == 0)
 		usage_bytes = 20 * 1024;
 	/* allocate some scratch memory */
 	ctx->scratch = kzalloc(usage_bytes, GFP_KERNEL);
 	if (!ctx->scratch)
 		return -ENOMEM;
+	ctx->scratch_size_bytes = usage_bytes;
 	return 0;
 }
diff --git a/drivers/gpu/drm/radeon/atom.h b/drivers/gpu/drm/radeon/atom.h
index a589a55b223..93cfe2086ba 100644
--- a/drivers/gpu/drm/radeon/atom.h
+++ b/drivers/gpu/drm/radeon/atom.h
@@ -137,6 +137,7 @@ struct atom_context {
 	int cs_equal, cs_above;
 	int io_mode;
 	uint32_t *scratch;
+	int scratch_size_bytes;
 };
 
 extern int atom_debug;
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index c742944d380..a515b2a09d8 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -466,7 +466,7 @@ static void atombios_crtc_program_ss(struct drm_crtc *crtc,
 			return;
 		}
 		args.v2.ucEnable = enable;
-		if ((ss->percentage == 0) || (ss->type & ATOM_EXTERNAL_SS_MASK))
+		if ((ss->percentage == 0) || (ss->type & ATOM_EXTERNAL_SS_MASK) || ASIC_IS_DCE41(rdev))
 			args.v2.ucEnable = ATOM_DISABLE;
 	} else if (ASIC_IS_DCE3(rdev)) {
 		args.v1.usSpreadSpectrumPercentage = cpu_to_le16(ss->percentage);
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 8a171b21b45..eb3f6dc6df8 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1638,7 +1638,17 @@ atombios_set_encoder_crtc_source(struct drm_encoder *encoder)
 			break;
 		case 2:
 			args.v2.ucCRTC = radeon_crtc->crtc_id;
-			args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
+			if (radeon_encoder_is_dp_bridge(encoder)) {
+				struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+
+				if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
+					args.v2.ucEncodeMode = ATOM_ENCODER_MODE_LVDS;
+				else if (connector->connector_type == DRM_MODE_CONNECTOR_VGA)
+					args.v2.ucEncodeMode = ATOM_ENCODER_MODE_CRT;
+				else
+					args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
+			} else
+				args.v2.ucEncodeMode = atombios_get_encoder_mode(encoder);
 			switch (radeon_encoder->encoder_id) {
 			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
 			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
@@ -1756,10 +1766,15 @@ static int radeon_atom_pick_dig_encoder(struct drm_encoder *encoder)
 	if (ASIC_IS_DCE4(rdev)) {
 		dig = radeon_encoder->enc_priv;
 		if (ASIC_IS_DCE41(rdev)) {
-			if (dig->linkb)
-				return 1;
-			else
-				return 0;
+			/* ontario follows DCE4 */
+			if (rdev->family == CHIP_PALM) {
+				if (dig->linkb)
+					return 1;
+				else
+					return 0;
+			} else
+				/* llano follows DCE3.2 */
+				return radeon_crtc->crtc_id;
 		} else {
 			switch (radeon_encoder->encoder_id) {
 			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index ae3c6f5dd2b..082fcaea583 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -321,7 +321,7 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo,
 	struct ttm_mem_type_manager *man = &bdev->man[new_mem->mem_type];
 	struct ttm_tt *ttm = bo->ttm;
 	struct ttm_mem_reg *old_mem = &bo->mem;
-	struct ttm_mem_reg old_copy;
+	struct ttm_mem_reg old_copy = *old_mem;
 	void *old_iomap;
 	void *new_iomap;
 	int ret;
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index f2b377c56a3..7b0260dc76f 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1715,7 +1715,8 @@ static void w83627ehf_device_remove_files(struct device *dev)
 }
 
 /* Get the monitoring functions started */
-static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data)
+static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data,
+						   enum kinds kind)
 {
 	int i;
 	u8 tmp, diode;
@@ -1746,10 +1747,16 @@ static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data)
 		w83627ehf_write_value(data, W83627EHF_REG_VBAT, tmp | 0x01);
 
 	/* Get thermal sensor types */
-	diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
+	switch (kind) {
+	case w83627ehf:
+		diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
+		break;
+	default:
+		diode = 0x70;
+	}
 	for (i = 0; i < 3; i++) {
 		if ((tmp & (0x02 << i)))
-			data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 2;
+			data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 3;
 		else
 			data->temp_type[i] = 4; /* thermistor */
 	}
@@ -2016,7 +2023,7 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 	}
 
 	/* Initialize the chip */
-	w83627ehf_init_device(data);
+	w83627ehf_init_device(data, sio_data->kind);
 
 	data->vrm = vid_which_vrm();
 	superio_enter(sio_data->sioreg);
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 9827c5e686c..811dbbd9306 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -327,7 +327,7 @@ config BLK_DEV_OPTI621
 	select BLK_DEV_IDEPCI
 	help
 	  This is a driver for the OPTi 82C621 EIDE controller.
-	  Please read the comments at the top of <file:drivers/ide/pci/opti621.c>.
+	  Please read the comments at the top of <file:drivers/ide/opti621.c>.
 
 config BLK_DEV_RZ1000
 	tristate "RZ1000 chipset bugfix/support"
@@ -365,7 +365,7 @@ config BLK_DEV_ALI15X3
 	  normal dual channel support.
 
 	  Please read the comments at the top of
-	  <file:drivers/ide/pci/alim15x3.c>.
+	  <file:drivers/ide/alim15x3.c>.
 
 	  If unsure, say N.
 
@@ -528,7 +528,7 @@ config BLK_DEV_NS87415
 	  This driver adds detection and support for the NS87415 chip
 	  (used mainly on SPARC64 and PA-RISC machines).
 
-	  Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>.
+	  Please read the comments at the top of <file:drivers/ide/ns87415.c>.
 
 config BLK_DEV_PDC202XX_OLD
 	tristate "PROMISE PDC202{46|62|65|67} support"
@@ -547,7 +547,7 @@ config BLK_DEV_PDC202XX_OLD
 	  for more than one card.
 
 	  Please read the comments at the top of
-	  <file:drivers/ide/pci/pdc202xx_old.c>.
+	  <file:drivers/ide/pdc202xx_old.c>.
 
 	  If unsure, say N.
 
@@ -593,7 +593,7 @@ config BLK_DEV_SIS5513
 	  ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,
 	  SiS745, SiS750
 
-	  Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>.
+	  Please read the comments at the top of <file:drivers/ide/sis5513.c>.
 
 config BLK_DEV_SL82C105
 	tristate "Winbond SL82c105 support"
@@ -616,7 +616,7 @@ config BLK_DEV_SLC90E66
 	  look-a-like to the PIIX4 it should be a nice addition.
 
 	  Please read the comments at the top of
-	  <file:drivers/ide/pci/slc90e66.c>.
+	  <file:drivers/ide/slc90e66.c>.
 
 config BLK_DEV_TRM290
 	tristate "Tekram TRM290 chipset support"
@@ -625,7 +625,7 @@ config BLK_DEV_TRM290
 	  This driver adds support for bus master DMA transfers
 	  using the Tekram TRM290 PCI IDE chip. Volunteers are
 	  needed for further tweaking and development.
-	  Please read the comments at the top of <file:drivers/ide/pci/trm290.c>.
+	  Please read the comments at the top of <file:drivers/ide/trm290.c>.
 
 config BLK_DEV_VIA82CXXX
 	tristate "VIA82CXXX chipset support"
@@ -836,7 +836,7 @@ config BLK_DEV_ALI14XX
 	  of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
 	  I/O speeds to be set as well.
 	  See the files <file:Documentation/ide/ide.txt> and
-	  <file:drivers/ide/legacy/ali14xx.c> for more info.
+	  <file:drivers/ide/ali14xx.c> for more info.
 
 config BLK_DEV_DTC2278
 	tristate "DTC-2278 support"
@@ -847,7 +847,7 @@ config BLK_DEV_DTC2278
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the DTC-2278 card, and permits faster I/O speeds to be set as
 	  well. See the <file:Documentation/ide/ide.txt> and
-	  <file:drivers/ide/legacy/dtc2278.c> files for more info.
+	  <file:drivers/ide/dtc2278.c> files for more info.
 
 config BLK_DEV_HT6560B
 	tristate "Holtek HT6560B support"
@@ -858,7 +858,7 @@ config BLK_DEV_HT6560B
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the Holtek card, and permits faster I/O speeds to be set as well.
 	  See the <file:Documentation/ide/ide.txt> and
-	  <file:drivers/ide/legacy/ht6560b.c> files for more info.
+	  <file:drivers/ide/ht6560b.c> files for more info.
 
 config BLK_DEV_QD65XX
 	tristate "QDI QD65xx support"
@@ -867,7 +867,7 @@ config BLK_DEV_QD65XX
 	help
 	  This driver is enabled at runtime using the "qd65xx.probe" kernel
 	  boot parameter.  It permits faster I/O speeds to be set.  See the
-	  <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
+	  <file:Documentation/ide/ide.txt> and <file:drivers/ide/qd65xx.c>
 	  for more info.
 
 config BLK_DEV_UMC8672
@@ -879,7 +879,7 @@ config BLK_DEV_UMC8672
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the UMC-8672, and permits faster I/O speeds to be set as well.
 	  See the files <file:Documentation/ide/ide.txt> and
-	  <file:drivers/ide/legacy/umc8672.c> for more info.
+	  <file:drivers/ide/umc8672.c> for more info.
 
 endif
 
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index d7215651772..a5c9ed128b9 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -181,7 +181,7 @@ static void v4l2_device_release(struct device *cd)
 	 * TODO: In the long run all drivers that use v4l2_device should use the
 	 * v4l2_device release callback. This check will then be unnecessary.
 	 */
-	if (v4l2_dev->release == NULL)
+	if (v4l2_dev && v4l2_dev->release == NULL)
 		v4l2_dev = NULL;
 
 	/* Release video_device and perform other
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index e46df5331c5..9a7eb3b36cf 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -239,13 +239,19 @@ void bnx2x_int_disable(struct bnx2x *bp);
  *  FUNC_N_CLID_X = N * NUM_SPECIAL_CLIENTS + FUNC_0_CLID_X
  *
  */
-/* iSCSI L2 */
-#define BNX2X_ISCSI_ETH_CL_ID_IDX	1
-#define BNX2X_ISCSI_ETH_CID		49
+enum {
+	BNX2X_ISCSI_ETH_CL_ID_IDX,
+	BNX2X_FCOE_ETH_CL_ID_IDX,
+	BNX2X_MAX_CNIC_ETH_CL_ID_IDX,
+};
 
-/* FCoE L2 */
-#define BNX2X_FCOE_ETH_CL_ID_IDX	2
-#define BNX2X_FCOE_ETH_CID		50
+#define BNX2X_CNIC_START_ETH_CID	48
+enum {
+	/* iSCSI L2 */
+	BNX2X_ISCSI_ETH_CID = BNX2X_CNIC_START_ETH_CID,
+	/* FCoE L2 */
+	BNX2X_FCOE_ETH_CID,
+};
 
 /** Additional rings budgeting */
 #ifdef BCM_CNIC
diff --git a/drivers/net/bnx2x/bnx2x_cmn.h b/drivers/net/bnx2x/bnx2x_cmn.h
index 223bfeebc59..2dc1199239d 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/bnx2x/bnx2x_cmn.h
@@ -1297,7 +1297,7 @@ static inline void bnx2x_init_txdata(struct bnx2x *bp,
 static inline u8 bnx2x_cnic_eth_cl_id(struct bnx2x *bp, u8 cl_idx)
 {
 	return bp->cnic_base_cl_id + cl_idx +
-		(bp->pf_num >> 1) * NON_ETH_CONTEXT_USE;
+		(bp->pf_num >> 1) * BNX2X_MAX_CNIC_ETH_CL_ID_IDX;
 }
 
 static inline u8 bnx2x_cnic_fw_sb_id(struct bnx2x *bp)
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 92feac68b66..4cc6f44c2ba 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -261,11 +261,13 @@ static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		void __iomem *data = &regs->tx.dsr1_0;
 		u16 *payload = (u16 *)frame->data;
 
-		/* It is safe to write into dsr[dlc+1] */
-		for (i = 0; i < (frame->can_dlc + 1) / 2; i++) {
+		for (i = 0; i < frame->can_dlc / 2; i++) {
 			out_be16(data, *payload++);
 			data += 2 + _MSCAN_RESERVED_DSR_SIZE;
 		}
+		/* write remaining byte if necessary */
+		if (frame->can_dlc & 1)
+			out_8(data, frame->data[frame->can_dlc - 1]);
 	}
 
 	out_8(&regs->tx.dlr, frame->can_dlc);
@@ -330,10 +332,13 @@ static void mscan_get_rx_frame(struct net_device *dev, struct can_frame *frame)
 		void __iomem *data = &regs->rx.dsr1_0;
 		u16 *payload = (u16 *)frame->data;
 
-		for (i = 0; i < (frame->can_dlc + 1) / 2; i++) {
+		for (i = 0; i < frame->can_dlc / 2; i++) {
 			*payload++ = in_be16(data);
 			data += 2 + _MSCAN_RESERVED_DSR_SIZE;
 		}
+		/* read remaining byte if necessary */
+		if (frame->can_dlc & 1)
+			frame->data[frame->can_dlc - 1] = in_8(data);
 	}
 
 	out_8(&regs->canrflg, MSCAN_RXF);
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 6e03de034ac..f76ab6bf309 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -172,7 +172,7 @@ int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv,
 	memset(ring->buf, 0, ring->buf_size);
 
 	ring->qp_state = MLX4_QP_STATE_RST;
-	ring->doorbell_qpn = swab32(ring->qp.qpn << 8);
+	ring->doorbell_qpn = ring->qp.qpn << 8;
 
 	mlx4_en_fill_qp_context(priv, ring->size, ring->stride, 1, 0, ring->qpn,
 				ring->cqn, &ring->context);
@@ -791,7 +791,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 		skb_orphan(skb);
 
 	if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tag) {
-		*(u32 *) (&tx_desc->ctrl.vlan_tag) |= ring->doorbell_qpn;
+		*(__be32 *) (&tx_desc->ctrl.vlan_tag) |= cpu_to_be32(ring->doorbell_qpn);
 		op_own |= htonl((bf_index & 0xffff) << 8);
 		/* Ensure new descirptor hits memory
 		* before setting ownership of this descriptor to HW */
@@ -812,7 +812,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 		wmb();
 		tx_desc->ctrl.owner_opcode = op_own;
 		wmb();
-		writel(ring->doorbell_qpn, ring->bf.uar->map + MLX4_SEND_DOORBELL);
+		iowrite32be(ring->doorbell_qpn, ring->bf.uar->map + MLX4_SEND_DOORBELL);
 	}
 
 	/* Poll CQ here */