ACPICA: Split large file, evgpeblk

Create two new files, evgpeinit.c and evgpeutil.c. Updated
unix and linux makefiles.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

5 files changed, 1025 insertions, 926 deletions

diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index c1102098dbf..d93cc06f4bf 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -14,7 +14,7 @@ acpi-y := dsfield.o   dsmthdat.o  dsopcode.o  dswexec.o  dswscope.o \
 
 acpi-y += evevent.o  evregion.o  evsci.o    evxfevnt.o \
 	 evmisc.o   evrgnini.o  evxface.o  evxfregn.o \
-	 evgpe.o    evgpeblk.o
+	 evgpe.o    evgpeblk.o evgpeinit.o  evgpeutil.o
 
 acpi-y += exconfig.o  exfield.o  exnames.o   exoparg6.o  exresolv.o  exstorob.o\
 	 exconvrt.o  exfldio.o  exoparg1.o  exprep.o    exresop.o   exsystem.o\
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index 0f83dc46bd9..64d1e5c2d4a 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -73,8 +73,10 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node *node,
 			     u32 notify_value);
 
 /*
- * evgpe - GPE handling and dispatch
+ * evgpe - Low-level GPE support
  */
+u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list);
+
 acpi_status
 acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info);
 
@@ -90,18 +92,8 @@ struct acpi_gpe_event_info *acpi_ev_low_get_gpe_info(u32 gpe_number,
 						     *gpe_block);
 
 /*
- * evgpeblk
+ * evgpeblk - Upper-level GPE block support
  */
-u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info);
-
-acpi_status
-acpi_ev_walk_gpe_list(acpi_gpe_callback gpe_walk_callback, void *context);
-
-acpi_status
-acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
-			    struct acpi_gpe_block_info *gpe_block,
-			    void *context);
-
 acpi_status
 acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
 			 struct acpi_generic_address *gpe_block_address,
@@ -110,8 +102,6 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
 			 u32 interrupt_number,
 			 struct acpi_gpe_block_info **return_gpe_block);
 
-void acpi_ev_update_gpes(acpi_owner_id table_owner_id);
-
 acpi_status
 acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
 			     struct acpi_gpe_block_info *gpe_block);
@@ -122,10 +112,38 @@ u32
 acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info,
 		     u32 gpe_number);
 
-u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list);
-
+/*
+ * evgpeinit - GPE initialization and update
+ */
 acpi_status acpi_ev_gpe_initialize(void);
 
+void acpi_ev_update_gpes(acpi_owner_id table_owner_id);
+
+acpi_status
+acpi_ev_match_gpe_method(acpi_handle obj_handle,
+			 u32 level, void *context, void **return_value);
+
+acpi_status
+acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
+			  u32 level, void *context, void **return_value);
+
+/*
+ * evgpeutil - GPE utilities
+ */
+acpi_status
+acpi_ev_walk_gpe_list(acpi_gpe_callback gpe_walk_callback, void *context);
+
+u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info);
+
+struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32 interrupt_number);
+
+acpi_status acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt);
+
+acpi_status
+acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
+			    struct acpi_gpe_block_info *gpe_block,
+			    void *context);
+
 /*
  * evregion - Address Space handling
  */
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 3341d1dfe78..7c28f2d9fd3 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -45,27 +45,12 @@
 #include "accommon.h"
 #include "acevents.h"
 #include "acnamesp.h"
-#include "acinterp.h"
 
 #define _COMPONENT          ACPI_EVENTS
 ACPI_MODULE_NAME("evgpeblk")
 
 /* Local prototypes */
 static acpi_status
-acpi_ev_match_gpe_method(acpi_handle obj_handle,
-			 u32 level, void *obj_desc, void **return_value);
-
-static acpi_status
-acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
-			  u32 level, void *info, void **return_value);
-
-static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32
-							       interrupt_number);
-
-static acpi_status
-acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt);
-
-static acpi_status
 acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
 			  u32 interrupt_number);
 
@@ -74,632 +59,6 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block);
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_ev_valid_gpe_event
- *
- * PARAMETERS:  gpe_event_info              - Info for this GPE
- *
- * RETURN:      TRUE if the gpe_event is valid
- *
- * DESCRIPTION: Validate a GPE event. DO NOT CALL FROM INTERRUPT LEVEL.
- *              Should be called only when the GPE lists are semaphore locked
- *              and not subject to change.
- *
- ******************************************************************************/
-
-u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info)
-{
-	struct acpi_gpe_xrupt_info *gpe_xrupt_block;
-	struct acpi_gpe_block_info *gpe_block;
-
-	ACPI_FUNCTION_ENTRY();
-
-	/* No need for spin lock since we are not changing any list elements */
-
-	/* Walk the GPE interrupt levels */
-
-	gpe_xrupt_block = acpi_gbl_gpe_xrupt_list_head;
-	while (gpe_xrupt_block) {
-		gpe_block = gpe_xrupt_block->gpe_block_list_head;
-
-		/* Walk the GPE blocks on this interrupt level */
-
-		while (gpe_block) {
-			if ((&gpe_block->event_info[0] <= gpe_event_info) &&
-			    (&gpe_block->event_info[gpe_block->gpe_count] >
-			     gpe_event_info)) {
-				return (TRUE);
-			}
-
-			gpe_block = gpe_block->next;
-		}
-
-		gpe_xrupt_block = gpe_xrupt_block->next;
-	}
-
-	return (FALSE);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_walk_gpe_list
- *
- * PARAMETERS:  gpe_walk_callback   - Routine called for each GPE block
- *              Context             - Value passed to callback
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Walk the GPE lists.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ev_walk_gpe_list(acpi_gpe_callback gpe_walk_callback, void *context)
-{
-	struct acpi_gpe_block_info *gpe_block;
-	struct acpi_gpe_xrupt_info *gpe_xrupt_info;
-	acpi_status status = AE_OK;
-	acpi_cpu_flags flags;
-
-	ACPI_FUNCTION_TRACE(ev_walk_gpe_list);
-
-	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
-
-	/* Walk the interrupt level descriptor list */
-
-	gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
-	while (gpe_xrupt_info) {
-
-		/* Walk all Gpe Blocks attached to this interrupt level */
-
-		gpe_block = gpe_xrupt_info->gpe_block_list_head;
-		while (gpe_block) {
-
-			/* One callback per GPE block */
-
-			status =
-			    gpe_walk_callback(gpe_xrupt_info, gpe_block,
-					      context);
-			if (ACPI_FAILURE(status)) {
-				if (status == AE_CTRL_END) {	/* Callback abort */
-					status = AE_OK;
-				}
-				goto unlock_and_exit;
-			}
-
-			gpe_block = gpe_block->next;
-		}
-
-		gpe_xrupt_info = gpe_xrupt_info->next;
-	}
-
-      unlock_and_exit:
-	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_delete_gpe_handlers
- *
- * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
- *              gpe_block           - Gpe Block info
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Delete all Handler objects found in the GPE data structs.
- *              Used only prior to termination.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
-			    struct acpi_gpe_block_info *gpe_block,
-			    void *context)
-{
-	struct acpi_gpe_event_info *gpe_event_info;
-	u32 i;
-	u32 j;
-
-	ACPI_FUNCTION_TRACE(ev_delete_gpe_handlers);
-
-	/* Examine each GPE Register within the block */
-
-	for (i = 0; i < gpe_block->register_count; i++) {
-
-		/* Now look at the individual GPEs in this byte register */
-
-		for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
-			gpe_event_info = &gpe_block->event_info[((acpi_size) i *
-								 ACPI_GPE_REGISTER_WIDTH)
-								+ j];
-
-			if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
-			    ACPI_GPE_DISPATCH_HANDLER) {
-				ACPI_FREE(gpe_event_info->dispatch.handler);
-				gpe_event_info->dispatch.handler = NULL;
-				gpe_event_info->flags &=
-				    ~ACPI_GPE_DISPATCH_MASK;
-			}
-		}
-	}
-
-	return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_match_gpe_method
- *
- * PARAMETERS:  Callback from walk_namespace
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
- *              control method under the _GPE portion of the namespace.
- *              Extract the name and GPE type from the object, saving this
- *              information for quick lookup during GPE dispatch. Allows a
- *              per-owner_id evaluation if execute_by_owner_id is TRUE in the
- *              walk_info parameter block.
- *
- *              The name of each GPE control method is of the form:
- *              "_Lxx" or "_Exx", where:
- *                  L      - means that the GPE is level triggered
- *                  E      - means that the GPE is edge triggered
- *                  xx     - is the GPE number [in HEX]
- *
- * If walk_info->execute_by_owner_id is TRUE, we only execute examine GPE methods
- *    with that owner.
- * If walk_info->enable_this_gpe is TRUE, the GPE that is referred to by a GPE
- *    method is immediately enabled (Used for Load/load_table operators)
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ev_match_gpe_method(acpi_handle obj_handle,
-			 u32 level, void *context, void **return_value)
-{
-	struct acpi_namespace_node *method_node =
-	    ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle);
-	struct acpi_gpe_walk_info *walk_info =
-	    ACPI_CAST_PTR(struct acpi_gpe_walk_info, context);
-	struct acpi_gpe_event_info *gpe_event_info;
-	struct acpi_namespace_node *gpe_device;
-	acpi_status status;
-	u32 gpe_number;
-	char name[ACPI_NAME_SIZE + 1];
-	u8 type;
-
-	ACPI_FUNCTION_TRACE(ev_match_gpe_method);
-
-	/* Check if requested owner_id matches this owner_id */
-
-	if ((walk_info->execute_by_owner_id) &&
-	    (method_node->owner_id != walk_info->owner_id)) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/*
-	 * Match and decode the _Lxx and _Exx GPE method names
-	 *
-	 * 1) Extract the method name and null terminate it
-	 */
-	ACPI_MOVE_32_TO_32(name, &method_node->name.integer);
-	name[ACPI_NAME_SIZE] = 0;
-
-	/* 2) Name must begin with an underscore */
-
-	if (name[0] != '_') {
-		return_ACPI_STATUS(AE_OK);	/* Ignore this method */
-	}
-
-	/*
-	 * 3) Edge/Level determination is based on the 2nd character
-	 *    of the method name
-	 *
-	 * NOTE: Default GPE type is RUNTIME only. Later, if a _PRW object is
-	 * found that points to this GPE, the ACPI_GPE_CAN_WAKE flag is set.
-	 */
-	switch (name[1]) {
-	case 'L':
-		type = ACPI_GPE_LEVEL_TRIGGERED;
-		break;
-
-	case 'E':
-		type = ACPI_GPE_EDGE_TRIGGERED;
-		break;
-
-	default:
-		/* Unknown method type, just ignore it */
-
-		ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
-				  "Ignoring unknown GPE method type: %s "
-				  "(name not of form _Lxx or _Exx)", name));
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* 4) The last two characters of the name are the hex GPE Number */
-
-	gpe_number = ACPI_STRTOUL(&name[2], NULL, 16);
-	if (gpe_number == ACPI_UINT32_MAX) {
-
-		/* Conversion failed; invalid method, just ignore it */
-
-		ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
-				  "Could not extract GPE number from name: %s "
-				  "(name is not of form _Lxx or _Exx)", name));
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Ensure that we have a valid GPE number for this GPE block */
-
-	gpe_event_info =
-	    acpi_ev_low_get_gpe_info(gpe_number, walk_info->gpe_block);
-	if (!gpe_event_info) {
-		/*
-		 * This gpe_number is not valid for this GPE block, just ignore it.
-		 * However, it may be valid for a different GPE block, since GPE0
-		 * and GPE1 methods both appear under \_GPE.
-		 */
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
-	    ACPI_GPE_DISPATCH_HANDLER) {
-
-		/* If there is already a handler, ignore this GPE method */
-
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
-	    ACPI_GPE_DISPATCH_METHOD) {
-		/*
-		 * If there is already a method, ignore this method. But check
-		 * for a type mismatch (if both the _Lxx AND _Exx exist)
-		 */
-		if (type != (gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK)) {
-			ACPI_ERROR((AE_INFO,
-				    "For GPE 0x%.2X, found both _L%2.2X and _E%2.2X methods",
-				    gpe_number, gpe_number, gpe_number));
-		}
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/*
-	 * Add the GPE information from above to the gpe_event_info block for
-	 * use during dispatch of this GPE.
-	 */
-	gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_METHOD);
-	gpe_event_info->dispatch.method_node = method_node;
-
-	/*
-	 * Enable this GPE if requested. This only happens when during the
-	 * execution of a Load or load_table operator. We have found a new
-	 * GPE method and want to immediately enable the GPE if it is a
-	 * runtime GPE.
-	 */
-	if (walk_info->enable_this_gpe) {
-
-		/* Ignore GPEs that can wake the system */
-
-		if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE) ||
-		    !acpi_gbl_leave_wake_gpes_disabled) {
-			walk_info->count++;
-			gpe_device = walk_info->gpe_device;
-
-			if (gpe_device == acpi_gbl_fadt_gpe_device) {
-				gpe_device = NULL;
-			}
-
-			status = acpi_enable_gpe(gpe_device, gpe_number,
-						 ACPI_GPE_TYPE_RUNTIME);
-			if (ACPI_FAILURE(status)) {
-				ACPI_EXCEPTION((AE_INFO, status,
-						"Could not enable GPE 0x%02X",
-						gpe_number));
-			}
-		}
-	}
-
-	ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
-			  "Registered GPE method %s as GPE number 0x%.2X\n",
-			  name, gpe_number));
-	return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_match_prw_and_gpe
- *
- * PARAMETERS:  Callback from walk_namespace
- *
- * RETURN:      Status. NOTE: We ignore errors so that the _PRW walk is
- *              not aborted on a single _PRW failure.
- *
- * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
- *              Device. Run the _PRW method. If present, extract the GPE
- *              number and mark the GPE as a CAN_WAKE GPE. Allows a
- *              per-owner_id execution if execute_by_owner_id is TRUE in the
- *              walk_info parameter block.
- *
- * If walk_info->execute_by_owner_id is TRUE, we only execute _PRWs with that
- *    owner.
- * If walk_info->gpe_device is NULL, we execute every _PRW found. Otherwise,
- *    we only execute _PRWs that refer to the input gpe_device.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
-			  u32 level, void *context, void **return_value)
-{
-	struct acpi_gpe_walk_info *walk_info =
-	    ACPI_CAST_PTR(struct acpi_gpe_walk_info, context);
-	struct acpi_namespace_node *gpe_device;
-	struct acpi_gpe_block_info *gpe_block;
-	struct acpi_namespace_node *target_gpe_device;
-	struct acpi_namespace_node *prw_node;
-	struct acpi_gpe_event_info *gpe_event_info;
-	union acpi_operand_object *pkg_desc;
-	union acpi_operand_object *obj_desc;
-	u32 gpe_number;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ev_match_prw_and_gpe);
-
-	/* Check for a _PRW method under this device */
-
-	status = acpi_ns_get_node(obj_handle, METHOD_NAME__PRW,
-				  ACPI_NS_NO_UPSEARCH, &prw_node);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Check if requested owner_id matches this owner_id */
-
-	if ((walk_info->execute_by_owner_id) &&
-	    (prw_node->owner_id != walk_info->owner_id)) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Execute the _PRW */
-
-	status = acpi_ut_evaluate_object(prw_node, NULL,
-					 ACPI_BTYPE_PACKAGE, &pkg_desc);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* The returned _PRW package must have at least two elements */
-
-	if (pkg_desc->package.count < 2) {
-		goto cleanup;
-	}
-
-	/* Extract pointers from the input context */
-
-	gpe_device = walk_info->gpe_device;
-	gpe_block = walk_info->gpe_block;
-
-	/*
-	 * The _PRW object must return a package, we are only interested
-	 * in the first element
-	 */
-	obj_desc = pkg_desc->package.elements[0];
-
-	if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
-
-		/* Use FADT-defined GPE device (from definition of _PRW) */
-
-		target_gpe_device = NULL;
-		if (gpe_device) {
-			target_gpe_device = acpi_gbl_fadt_gpe_device;
-		}
-
-		/* Integer is the GPE number in the FADT described GPE blocks */
-
-		gpe_number = (u32) obj_desc->integer.value;
-	} else if (obj_desc->common.type == ACPI_TYPE_PACKAGE) {
-
-		/* Package contains a GPE reference and GPE number within a GPE block */
-
-		if ((obj_desc->package.count < 2) ||
-		    ((obj_desc->package.elements[0])->common.type !=
-		     ACPI_TYPE_LOCAL_REFERENCE) ||
-		    ((obj_desc->package.elements[1])->common.type !=
-		     ACPI_TYPE_INTEGER)) {
-			goto cleanup;
-		}
-
-		/* Get GPE block reference and decode */
-
-		target_gpe_device =
-		    obj_desc->package.elements[0]->reference.node;
-		gpe_number = (u32) obj_desc->package.elements[1]->integer.value;
-	} else {
-		/* Unknown type, just ignore it */
-
-		goto cleanup;
-	}
-
-	/* Get the gpe_event_info for this GPE */
-
-	if (gpe_device) {
-		/*
-		 * Is this GPE within this block?
-		 *
-		 * TRUE if and only if these conditions are true:
-		 *     1) The GPE devices match.
-		 *     2) The GPE index(number) is within the range of the Gpe Block
-		 *          associated with the GPE device.
-		 */
-		if (gpe_device != target_gpe_device) {
-			goto cleanup;
-		}
-
-		gpe_event_info =
-		    acpi_ev_low_get_gpe_info(gpe_number, gpe_block);
-	} else {
-		/* gpe_device is NULL, just match the target_device and gpe_number */
-
-		gpe_event_info =
-		    acpi_ev_get_gpe_event_info(target_gpe_device, gpe_number);
-	}
-
-	if (gpe_event_info) {
-		if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
-
-			/* This GPE can wake the system */
-
-			gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
-			walk_info->count++;
-		}
-	}
-
-      cleanup:
-	acpi_ut_remove_reference(pkg_desc);
-	return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_get_gpe_xrupt_block
- *
- * PARAMETERS:  interrupt_number     - Interrupt for a GPE block
- *
- * RETURN:      A GPE interrupt block
- *
- * DESCRIPTION: Get or Create a GPE interrupt block. There is one interrupt
- *              block per unique interrupt level used for GPEs. Should be
- *              called only when the GPE lists are semaphore locked and not
- *              subject to change.
- *
- ******************************************************************************/
-
-static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32
-							       interrupt_number)
-{
-	struct acpi_gpe_xrupt_info *next_gpe_xrupt;
-	struct acpi_gpe_xrupt_info *gpe_xrupt;
-	acpi_status status;
-	acpi_cpu_flags flags;
-
-	ACPI_FUNCTION_TRACE(ev_get_gpe_xrupt_block);
-
-	/* No need for lock since we are not changing any list elements here */
-
-	next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head;
-	while (next_gpe_xrupt) {
-		if (next_gpe_xrupt->interrupt_number == interrupt_number) {
-			return_PTR(next_gpe_xrupt);
-		}
-
-		next_gpe_xrupt = next_gpe_xrupt->next;
-	}
-
-	/* Not found, must allocate a new xrupt descriptor */
-
-	gpe_xrupt = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_xrupt_info));
-	if (!gpe_xrupt) {
-		return_PTR(NULL);
-	}
-
-	gpe_xrupt->interrupt_number = interrupt_number;
-
-	/* Install new interrupt descriptor with spin lock */
-
-	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
-	if (acpi_gbl_gpe_xrupt_list_head) {
-		next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head;
-		while (next_gpe_xrupt->next) {
-			next_gpe_xrupt = next_gpe_xrupt->next;
-		}
-
-		next_gpe_xrupt->next = gpe_xrupt;
-		gpe_xrupt->previous = next_gpe_xrupt;
-	} else {
-		acpi_gbl_gpe_xrupt_list_head = gpe_xrupt;
-	}
-	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
-
-	/* Install new interrupt handler if not SCI_INT */
-
-	if (interrupt_number != acpi_gbl_FADT.sci_interrupt) {
-		status = acpi_os_install_interrupt_handler(interrupt_number,
-							   acpi_ev_gpe_xrupt_handler,
-							   gpe_xrupt);
-		if (ACPI_FAILURE(status)) {
-			ACPI_ERROR((AE_INFO,
-				    "Could not install GPE interrupt handler at level 0x%X",
-				    interrupt_number));
-			return_PTR(NULL);
-		}
-	}
-
-	return_PTR(gpe_xrupt);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_delete_gpe_xrupt
- *
- * PARAMETERS:  gpe_xrupt       - A GPE interrupt info block
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Remove and free a gpe_xrupt block. Remove an associated
- *              interrupt handler if not the SCI interrupt.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt)
-{
-	acpi_status status;
-	acpi_cpu_flags flags;
-
-	ACPI_FUNCTION_TRACE(ev_delete_gpe_xrupt);
-
-	/* We never want to remove the SCI interrupt handler */
-
-	if (gpe_xrupt->interrupt_number == acpi_gbl_FADT.sci_interrupt) {
-		gpe_xrupt->gpe_block_list_head = NULL;
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Disable this interrupt */
-
-	status =
-	    acpi_os_remove_interrupt_handler(gpe_xrupt->interrupt_number,
-					     acpi_ev_gpe_xrupt_handler);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Unlink the interrupt block with lock */
-
-	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
-	if (gpe_xrupt->previous) {
-		gpe_xrupt->previous->next = gpe_xrupt->next;
-	} else {
-		/* No previous, update list head */
-
-		acpi_gbl_gpe_xrupt_list_head = gpe_xrupt->next;
-	}
-
-	if (gpe_xrupt->next) {
-		gpe_xrupt->next->previous = gpe_xrupt->previous;
-	}
-	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
-
-	/* Free the block */
-
-	ACPI_FREE(gpe_xrupt);
-	return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
  * FUNCTION:    acpi_ev_install_gpe_block
  *
  * PARAMETERS:  gpe_block               - New GPE block
@@ -1060,123 +419,6 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_ev_update_gpes
- *
- * PARAMETERS:  table_owner_id      - ID of the newly-loaded ACPI table
- *
- * RETURN:      None
- *
- * DESCRIPTION: Check for new GPE methods (_Lxx/_Exx) made available as a
- *              result of a Load() or load_table() operation. If new GPE
- *              methods have been installed, register the new methods and
- *              enable and runtime GPEs that are associated with them. Also,
- *              run any newly loaded _PRW methods in order to discover any
- *              new CAN_WAKE GPEs.
- *
- ******************************************************************************/
-
-void acpi_ev_update_gpes(acpi_owner_id table_owner_id)
-{
-	struct acpi_gpe_xrupt_info *gpe_xrupt_info;
-	struct acpi_gpe_block_info *gpe_block;
-	struct acpi_gpe_walk_info walk_info;
-	acpi_status status = AE_OK;
-	u32 new_wake_gpe_count = 0;
-
-	/* We will examine only _PRW/_Lxx/_Exx methods owned by this table */
-
-	walk_info.owner_id = table_owner_id;
-	walk_info.execute_by_owner_id = TRUE;
-	walk_info.count = 0;
-
-	if (acpi_gbl_leave_wake_gpes_disabled) {
-		/*
-		 * 1) Run any newly-loaded _PRW methods to find any GPEs that
-		 * can now be marked as CAN_WAKE GPEs. Note: We must run the
-		 * _PRW methods before we process the _Lxx/_Exx methods because
-		 * we will enable all runtime GPEs associated with the new
-		 * _Lxx/_Exx methods at the time we process those methods.
-		 *
-		 * Unlock interpreter so that we can run the _PRW methods.
-		 */
-		walk_info.gpe_block = NULL;
-		walk_info.gpe_device = NULL;
-
-		acpi_ex_exit_interpreter();
-
-		status =
-		    acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-					   ACPI_UINT32_MAX,
-					   ACPI_NS_WALK_NO_UNLOCK,
-					   acpi_ev_match_prw_and_gpe, NULL,
-					   &walk_info, NULL);
-		if (ACPI_FAILURE(status)) {
-			ACPI_EXCEPTION((AE_INFO, status,
-					"While executing _PRW methods"));
-		}
-
-		acpi_ex_enter_interpreter();
-		new_wake_gpe_count = walk_info.count;
-	}
-
-	/*
-	 * 2) Find any _Lxx/_Exx GPE methods that have just been loaded.
-	 *
-	 * Any GPEs that correspond to new _Lxx/_Exx methods and are not
-	 * marked as CAN_WAKE are immediately enabled.
-	 *
-	 * Examine the namespace underneath each gpe_device within the
-	 * gpe_block lists.
-	 */
-	status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
-	if (ACPI_FAILURE(status)) {
-		return;
-	}
-
-	walk_info.count = 0;
-	walk_info.enable_this_gpe = TRUE;
-
-	/* Walk the interrupt level descriptor list */
-
-	gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
-	while (gpe_xrupt_info) {
-
-		/* Walk all Gpe Blocks attached to this interrupt level */
-
-		gpe_block = gpe_xrupt_info->gpe_block_list_head;
-		while (gpe_block) {
-			walk_info.gpe_block = gpe_block;
-			walk_info.gpe_device = gpe_block->node;
-
-			status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD,
-							walk_info.gpe_device,
-							ACPI_UINT32_MAX,
-							ACPI_NS_WALK_NO_UNLOCK,
-							acpi_ev_match_gpe_method,
-							NULL, &walk_info, NULL);
-			if (ACPI_FAILURE(status)) {
-				ACPI_EXCEPTION((AE_INFO, status,
-						"While decoding _Lxx/_Exx methods"));
-			}
-
-			gpe_block = gpe_block->next;
-		}
-
-		gpe_xrupt_info = gpe_xrupt_info->next;
-	}
-
-	if (walk_info.count || new_wake_gpe_count) {
-		ACPI_INFO((AE_INFO,
-			   "Enabled %u new runtime GPEs, added %u new wakeup GPEs",
-			   walk_info.count, new_wake_gpe_count));
-	}
-
-	(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
-	return;
-}
-
-/*******************************************************************************
- *
  * FUNCTION:    acpi_ev_initialize_gpe_block
  *
  * PARAMETERS:  gpe_device          - Handle to the parent GPE block
@@ -1296,154 +538,3 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
 
 	return_ACPI_STATUS(AE_OK);
 }
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_gpe_initialize
- *
- * PARAMETERS:  None
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Initialize the GPE data structures
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_gpe_initialize(void)
-{
-	u32 register_count0 = 0;
-	u32 register_count1 = 0;
-	u32 gpe_number_max = 0;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ev_gpe_initialize);
-
-	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/*
-	 * Initialize the GPE Block(s) defined in the FADT
-	 *
-	 * Why the GPE register block lengths are divided by 2:  From the ACPI
-	 * Spec, section "General-Purpose Event Registers", we have:
-	 *
-	 * "Each register block contains two registers of equal length
-	 *  GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the
-	 *  GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN
-	 *  The length of the GPE1_STS and GPE1_EN registers is equal to
-	 *  half the GPE1_LEN. If a generic register block is not supported
-	 *  then its respective block pointer and block length values in the
-	 *  FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need
-	 *  to be the same size."
-	 */
-
-	/*
-	 * Determine the maximum GPE number for this machine.
-	 *
-	 * Note: both GPE0 and GPE1 are optional, and either can exist without
-	 * the other.
-	 *
-	 * If EITHER the register length OR the block address are zero, then that
-	 * particular block is not supported.
-	 */
-	if (acpi_gbl_FADT.gpe0_block_length &&
-	    acpi_gbl_FADT.xgpe0_block.address) {
-
-		/* GPE block 0 exists (has both length and address > 0) */
-
-		register_count0 = (u16) (acpi_gbl_FADT.gpe0_block_length / 2);
-
-		gpe_number_max =
-		    (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1;
-
-		/* Install GPE Block 0 */
-
-		status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
-						  &acpi_gbl_FADT.xgpe0_block,
-						  register_count0, 0,
-						  acpi_gbl_FADT.sci_interrupt,
-						  &acpi_gbl_gpe_fadt_blocks[0]);
-
-		if (ACPI_FAILURE(status)) {
-			ACPI_EXCEPTION((AE_INFO, status,
-					"Could not create GPE Block 0"));
-		}
-	}
-
-	if (acpi_gbl_FADT.gpe1_block_length &&
-	    acpi_gbl_FADT.xgpe1_block.address) {
-
-		/* GPE block 1 exists (has both length and address > 0) */
-
-		register_count1 = (u16) (acpi_gbl_FADT.gpe1_block_length / 2);
-
-		/* Check for GPE0/GPE1 overlap (if both banks exist) */
-
-		if ((register_count0) &&
-		    (gpe_number_max >= acpi_gbl_FADT.gpe1_base)) {
-			ACPI_ERROR((AE_INFO,
-				    "GPE0 block (GPE 0 to %u) overlaps the GPE1 block "
-				    "(GPE %u to %u) - Ignoring GPE1",
-				    gpe_number_max, acpi_gbl_FADT.gpe1_base,
-				    acpi_gbl_FADT.gpe1_base +
-				    ((register_count1 *
-				      ACPI_GPE_REGISTER_WIDTH) - 1)));
-
-			/* Ignore GPE1 block by setting the register count to zero */
-
-			register_count1 = 0;
-		} else {
-			/* Install GPE Block 1 */
-
-			status =
-			    acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
-						     &acpi_gbl_FADT.xgpe1_block,
-						     register_count1,
-						     acpi_gbl_FADT.gpe1_base,
-						     acpi_gbl_FADT.
-						     sci_interrupt,
-						     &acpi_gbl_gpe_fadt_blocks
-						     [1]);
-
-			if (ACPI_FAILURE(status)) {
-				ACPI_EXCEPTION((AE_INFO, status,
-						"Could not create GPE Block 1"));
-			}
-
-			/*
-			 * GPE0 and GPE1 do not have to be contiguous in the GPE number
-			 * space. However, GPE0 always starts at GPE number zero.
-			 */
-			gpe_number_max = acpi_gbl_FADT.gpe1_base +
-			    ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1);
-		}
-	}
-
-	/* Exit if there are no GPE registers */
-
-	if ((register_count0 + register_count1) == 0) {
-
-		/* GPEs are not required by ACPI, this is OK */
-
-		ACPI_DEBUG_PRINT((ACPI_DB_INIT,
-				  "There are no GPE blocks defined in the FADT\n"));
-		status = AE_OK;
-		goto cleanup;
-	}
-
-	/* Check for Max GPE number out-of-range */
-
-	if (gpe_number_max > ACPI_GPE_MAX) {
-		ACPI_ERROR((AE_INFO,
-			    "Maximum GPE number from FADT is too large: 0x%X",
-			    gpe_number_max));
-		status = AE_BAD_VALUE;
-		goto cleanup;
-	}
-
-      cleanup:
-	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
-	return_ACPI_STATUS(AE_OK);
-}
diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c
new file mode 100644
index 00000000000..3f6c2d26410
--- /dev/null
+++ b/drivers/acpi/acpica/evgpeinit.c
@@ -0,0 +1,653 @@
+/******************************************************************************
+ *
+ * Module Name: evgpeinit - System GPE initialization and update
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2010, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acevents.h"
+#include "acnamesp.h"
+#include "acinterp.h"
+
+#define _COMPONENT          ACPI_EVENTS
+ACPI_MODULE_NAME("evgpeinit")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_gpe_initialize
+ *
+ * PARAMETERS:  None
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Initialize the GPE data structures and the FADT GPE 0/1 blocks
+ *
+ ******************************************************************************/
+acpi_status acpi_ev_gpe_initialize(void)
+{
+	u32 register_count0 = 0;
+	u32 register_count1 = 0;
+	u32 gpe_number_max = 0;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE(ev_gpe_initialize);
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/*
+	 * Initialize the GPE Block(s) defined in the FADT
+	 *
+	 * Why the GPE register block lengths are divided by 2:  From the ACPI
+	 * Spec, section "General-Purpose Event Registers", we have:
+	 *
+	 * "Each register block contains two registers of equal length
+	 *  GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the
+	 *  GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN
+	 *  The length of the GPE1_STS and GPE1_EN registers is equal to
+	 *  half the GPE1_LEN. If a generic register block is not supported
+	 *  then its respective block pointer and block length values in the
+	 *  FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need
+	 *  to be the same size."
+	 */
+
+	/*
+	 * Determine the maximum GPE number for this machine.
+	 *
+	 * Note: both GPE0 and GPE1 are optional, and either can exist without
+	 * the other.
+	 *
+	 * If EITHER the register length OR the block address are zero, then that
+	 * particular block is not supported.
+	 */
+	if (acpi_gbl_FADT.gpe0_block_length &&
+	    acpi_gbl_FADT.xgpe0_block.address) {
+
+		/* GPE block 0 exists (has both length and address > 0) */
+
+		register_count0 = (u16)(acpi_gbl_FADT.gpe0_block_length / 2);
+
+		gpe_number_max =
+		    (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1;
+
+		/* Install GPE Block 0 */
+
+		status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
+						  &acpi_gbl_FADT.xgpe0_block,
+						  register_count0, 0,
+						  acpi_gbl_FADT.sci_interrupt,
+						  &acpi_gbl_gpe_fadt_blocks[0]);
+
+		if (ACPI_FAILURE(status)) {
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Could not create GPE Block 0"));
+		}
+	}
+
+	if (acpi_gbl_FADT.gpe1_block_length &&
+	    acpi_gbl_FADT.xgpe1_block.address) {
+
+		/* GPE block 1 exists (has both length and address > 0) */
+
+		register_count1 = (u16)(acpi_gbl_FADT.gpe1_block_length / 2);
+
+		/* Check for GPE0/GPE1 overlap (if both banks exist) */
+
+		if ((register_count0) &&
+		    (gpe_number_max >= acpi_gbl_FADT.gpe1_base)) {
+			ACPI_ERROR((AE_INFO,
+				    "GPE0 block (GPE 0 to %u) overlaps the GPE1 block "
+				    "(GPE %u to %u) - Ignoring GPE1",
+				    gpe_number_max, acpi_gbl_FADT.gpe1_base,
+				    acpi_gbl_FADT.gpe1_base +
+				    ((register_count1 *
+				      ACPI_GPE_REGISTER_WIDTH) - 1)));
+
+			/* Ignore GPE1 block by setting the register count to zero */
+
+			register_count1 = 0;
+		} else {
+			/* Install GPE Block 1 */
+
+			status =
+			    acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
+						     &acpi_gbl_FADT.xgpe1_block,
+						     register_count1,
+						     acpi_gbl_FADT.gpe1_base,
+						     acpi_gbl_FADT.
+						     sci_interrupt,
+						     &acpi_gbl_gpe_fadt_blocks
+						     [1]);
+
+			if (ACPI_FAILURE(status)) {
+				ACPI_EXCEPTION((AE_INFO, status,
+						"Could not create GPE Block 1"));
+			}
+
+			/*
+			 * GPE0 and GPE1 do not have to be contiguous in the GPE number
+			 * space. However, GPE0 always starts at GPE number zero.
+			 */
+			gpe_number_max = acpi_gbl_FADT.gpe1_base +
+			    ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1);
+		}
+	}
+
+	/* Exit if there are no GPE registers */
+
+	if ((register_count0 + register_count1) == 0) {
+
+		/* GPEs are not required by ACPI, this is OK */
+
+		ACPI_DEBUG_PRINT((ACPI_DB_INIT,
+				  "There are no GPE blocks defined in the FADT\n"));
+		status = AE_OK;
+		goto cleanup;
+	}
+
+	/* Check for Max GPE number out-of-range */
+
+	if (gpe_number_max > ACPI_GPE_MAX) {
+		ACPI_ERROR((AE_INFO,
+			    "Maximum GPE number from FADT is too large: 0x%X",
+			    gpe_number_max));
+		status = AE_BAD_VALUE;
+		goto cleanup;
+	}
+
+      cleanup:
+	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+	return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_update_gpes
+ *
+ * PARAMETERS:  table_owner_id      - ID of the newly-loaded ACPI table
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Check for new GPE methods (_Lxx/_Exx) made available as a
+ *              result of a Load() or load_table() operation. If new GPE
+ *              methods have been installed, register the new methods and
+ *              enable and runtime GPEs that are associated with them. Also,
+ *              run any newly loaded _PRW methods in order to discover any
+ *              new CAN_WAKE GPEs.
+ *
+ ******************************************************************************/
+
+void acpi_ev_update_gpes(acpi_owner_id table_owner_id)
+{
+	struct acpi_gpe_xrupt_info *gpe_xrupt_info;
+	struct acpi_gpe_block_info *gpe_block;
+	struct acpi_gpe_walk_info walk_info;
+	acpi_status status = AE_OK;
+	u32 new_wake_gpe_count = 0;
+
+	/* We will examine only _PRW/_Lxx/_Exx methods owned by this table */
+
+	walk_info.owner_id = table_owner_id;
+	walk_info.execute_by_owner_id = TRUE;
+	walk_info.count = 0;
+
+	if (acpi_gbl_leave_wake_gpes_disabled) {
+		/*
+		 * 1) Run any newly-loaded _PRW methods to find any GPEs that
+		 * can now be marked as CAN_WAKE GPEs. Note: We must run the
+		 * _PRW methods before we process the _Lxx/_Exx methods because
+		 * we will enable all runtime GPEs associated with the new
+		 * _Lxx/_Exx methods at the time we process those methods.
+		 *
+		 * Unlock interpreter so that we can run the _PRW methods.
+		 */
+		walk_info.gpe_block = NULL;
+		walk_info.gpe_device = NULL;
+
+		acpi_ex_exit_interpreter();
+
+		status =
+		    acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+					   ACPI_UINT32_MAX,
+					   ACPI_NS_WALK_NO_UNLOCK,
+					   acpi_ev_match_prw_and_gpe, NULL,
+					   &walk_info, NULL);
+		if (ACPI_FAILURE(status)) {
+			ACPI_EXCEPTION((AE_INFO, status,
+					"While executing _PRW methods"));
+		}
+
+		acpi_ex_enter_interpreter();
+		new_wake_gpe_count = walk_info.count;
+	}
+
+	/*
+	 * 2) Find any _Lxx/_Exx GPE methods that have just been loaded.
+	 *
+	 * Any GPEs that correspond to new _Lxx/_Exx methods and are not
+	 * marked as CAN_WAKE are immediately enabled.
+	 *
+	 * Examine the namespace underneath each gpe_device within the
+	 * gpe_block lists.
+	 */
+	status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
+	if (ACPI_FAILURE(status)) {
+		return;
+	}
+
+	walk_info.count = 0;
+	walk_info.enable_this_gpe = TRUE;
+
+	/* Walk the interrupt level descriptor list */
+
+	gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
+	while (gpe_xrupt_info) {
+
+		/* Walk all Gpe Blocks attached to this interrupt level */
+
+		gpe_block = gpe_xrupt_info->gpe_block_list_head;
+		while (gpe_block) {
+			walk_info.gpe_block = gpe_block;
+			walk_info.gpe_device = gpe_block->node;
+
+			status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD,
+							walk_info.gpe_device,
+							ACPI_UINT32_MAX,
+							ACPI_NS_WALK_NO_UNLOCK,
+							acpi_ev_match_gpe_method,
+							NULL, &walk_info, NULL);
+			if (ACPI_FAILURE(status)) {
+				ACPI_EXCEPTION((AE_INFO, status,
+						"While decoding _Lxx/_Exx methods"));
+			}
+
+			gpe_block = gpe_block->next;
+		}
+
+		gpe_xrupt_info = gpe_xrupt_info->next;
+	}
+
+	if (walk_info.count || new_wake_gpe_count) {
+		ACPI_INFO((AE_INFO,
+			   "Enabled %u new runtime GPEs, added %u new wakeup GPEs",
+			   walk_info.count, new_wake_gpe_count));
+	}
+
+	(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
+	return;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_match_gpe_method
+ *
+ * PARAMETERS:  Callback from walk_namespace
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
+ *              control method under the _GPE portion of the namespace.
+ *              Extract the name and GPE type from the object, saving this
+ *              information for quick lookup during GPE dispatch. Allows a
+ *              per-owner_id evaluation if execute_by_owner_id is TRUE in the
+ *              walk_info parameter block.
+ *
+ *              The name of each GPE control method is of the form:
+ *              "_Lxx" or "_Exx", where:
+ *                  L      - means that the GPE is level triggered
+ *                  E      - means that the GPE is edge triggered
+ *                  xx     - is the GPE number [in HEX]
+ *
+ * If walk_info->execute_by_owner_id is TRUE, we only execute examine GPE methods
+ *    with that owner.
+ * If walk_info->enable_this_gpe is TRUE, the GPE that is referred to by a GPE
+ *    method is immediately enabled (Used for Load/load_table operators)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_match_gpe_method(acpi_handle obj_handle,
+			 u32 level, void *context, void **return_value)
+{
+	struct acpi_namespace_node *method_node =
+	    ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle);
+	struct acpi_gpe_walk_info *walk_info =
+	    ACPI_CAST_PTR(struct acpi_gpe_walk_info, context);
+	struct acpi_gpe_event_info *gpe_event_info;
+	struct acpi_namespace_node *gpe_device;
+	acpi_status status;
+	u32 gpe_number;
+	char name[ACPI_NAME_SIZE + 1];
+	u8 type;
+
+	ACPI_FUNCTION_TRACE(ev_match_gpe_method);
+
+	/* Check if requested owner_id matches this owner_id */
+
+	if ((walk_info->execute_by_owner_id) &&
+	    (method_node->owner_id != walk_info->owner_id)) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/*
+	 * Match and decode the _Lxx and _Exx GPE method names
+	 *
+	 * 1) Extract the method name and null terminate it
+	 */
+	ACPI_MOVE_32_TO_32(name, &method_node->name.integer);
+	name[ACPI_NAME_SIZE] = 0;
+
+	/* 2) Name must begin with an underscore */
+
+	if (name[0] != '_') {
+		return_ACPI_STATUS(AE_OK);	/* Ignore this method */
+	}
+
+	/*
+	 * 3) Edge/Level determination is based on the 2nd character
+	 *    of the method name
+	 *
+	 * NOTE: Default GPE type is RUNTIME only. Later, if a _PRW object is
+	 * found that points to this GPE, the ACPI_GPE_CAN_WAKE flag is set.
+	 */
+	switch (name[1]) {
+	case 'L':
+		type = ACPI_GPE_LEVEL_TRIGGERED;
+		break;
+
+	case 'E':
+		type = ACPI_GPE_EDGE_TRIGGERED;
+		break;
+
+	default:
+		/* Unknown method type, just ignore it */
+
+		ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
+				  "Ignoring unknown GPE method type: %s "
+				  "(name not of form _Lxx or _Exx)", name));
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* 4) The last two characters of the name are the hex GPE Number */
+
+	gpe_number = ACPI_STRTOUL(&name[2], NULL, 16);
+	if (gpe_number == ACPI_UINT32_MAX) {
+
+		/* Conversion failed; invalid method, just ignore it */
+
+		ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
+				  "Could not extract GPE number from name: %s "
+				  "(name is not of form _Lxx or _Exx)", name));
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Ensure that we have a valid GPE number for this GPE block */
+
+	gpe_event_info =
+	    acpi_ev_low_get_gpe_info(gpe_number, walk_info->gpe_block);
+	if (!gpe_event_info) {
+		/*
+		 * This gpe_number is not valid for this GPE block, just ignore it.
+		 * However, it may be valid for a different GPE block, since GPE0
+		 * and GPE1 methods both appear under \_GPE.
+		 */
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
+	    ACPI_GPE_DISPATCH_HANDLER) {
+
+		/* If there is already a handler, ignore this GPE method */
+
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
+	    ACPI_GPE_DISPATCH_METHOD) {
+		/*
+		 * If there is already a method, ignore this method. But check
+		 * for a type mismatch (if both the _Lxx AND _Exx exist)
+		 */
+		if (type != (gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK)) {
+			ACPI_ERROR((AE_INFO,
+				    "For GPE 0x%.2X, found both _L%2.2X and _E%2.2X methods",
+				    gpe_number, gpe_number, gpe_number));
+		}
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/*
+	 * Add the GPE information from above to the gpe_event_info block for
+	 * use during dispatch of this GPE.
+	 */
+	gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_METHOD);
+	gpe_event_info->dispatch.method_node = method_node;
+
+	/*
+	 * Enable this GPE if requested. This only happens when during the
+	 * execution of a Load or load_table operator. We have found a new
+	 * GPE method and want to immediately enable the GPE if it is a
+	 * runtime GPE.
+	 */
+	if (walk_info->enable_this_gpe) {
+
+		/* Ignore GPEs that can wake the system */
+
+		if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE) ||
+		    !acpi_gbl_leave_wake_gpes_disabled) {
+			walk_info->count++;
+			gpe_device = walk_info->gpe_device;
+
+			if (gpe_device == acpi_gbl_fadt_gpe_device) {
+				gpe_device = NULL;
+			}
+
+			status = acpi_enable_gpe(gpe_device, gpe_number,
+						 ACPI_GPE_TYPE_RUNTIME);
+			if (ACPI_FAILURE(status)) {
+				ACPI_EXCEPTION((AE_INFO, status,
+						"Could not enable GPE 0x%02X",
+						gpe_number));
+			}
+		}
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
+			  "Registered GPE method %s as GPE number 0x%.2X\n",
+			  name, gpe_number));
+	return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_match_prw_and_gpe
+ *
+ * PARAMETERS:  Callback from walk_namespace
+ *
+ * RETURN:      Status. NOTE: We ignore errors so that the _PRW walk is
+ *              not aborted on a single _PRW failure.
+ *
+ * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
+ *              Device. Run the _PRW method. If present, extract the GPE
+ *              number and mark the GPE as a CAN_WAKE GPE. Allows a
+ *              per-owner_id execution if execute_by_owner_id is TRUE in the
+ *              walk_info parameter block.
+ *
+ * If walk_info->execute_by_owner_id is TRUE, we only execute _PRWs with that
+ *    owner.
+ * If walk_info->gpe_device is NULL, we execute every _PRW found. Otherwise,
+ *    we only execute _PRWs that refer to the input gpe_device.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
+			  u32 level, void *context, void **return_value)
+{
+	struct acpi_gpe_walk_info *walk_info =
+	    ACPI_CAST_PTR(struct acpi_gpe_walk_info, context);
+	struct acpi_namespace_node *gpe_device;
+	struct acpi_gpe_block_info *gpe_block;
+	struct acpi_namespace_node *target_gpe_device;
+	struct acpi_namespace_node *prw_node;
+	struct acpi_gpe_event_info *gpe_event_info;
+	union acpi_operand_object *pkg_desc;
+	union acpi_operand_object *obj_desc;
+	u32 gpe_number;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE(ev_match_prw_and_gpe);
+
+	/* Check for a _PRW method under this device */
+
+	status = acpi_ns_get_node(obj_handle, METHOD_NAME__PRW,
+				  ACPI_NS_NO_UPSEARCH, &prw_node);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Check if requested owner_id matches this owner_id */
+
+	if ((walk_info->execute_by_owner_id) &&
+	    (prw_node->owner_id != walk_info->owner_id)) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Execute the _PRW */
+
+	status = acpi_ut_evaluate_object(prw_node, NULL,
+					 ACPI_BTYPE_PACKAGE, &pkg_desc);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* The returned _PRW package must have at least two elements */
+
+	if (pkg_desc->package.count < 2) {
+		goto cleanup;
+	}
+
+	/* Extract pointers from the input context */
+
+	gpe_device = walk_info->gpe_device;
+	gpe_block = walk_info->gpe_block;
+
+	/*
+	 * The _PRW object must return a package, we are only interested
+	 * in the first element
+	 */
+	obj_desc = pkg_desc->package.elements[0];
+
+	if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
+
+		/* Use FADT-defined GPE device (from definition of _PRW) */
+
+		target_gpe_device = NULL;
+		if (gpe_device) {
+			target_gpe_device = acpi_gbl_fadt_gpe_device;
+		}
+
+		/* Integer is the GPE number in the FADT described GPE blocks */
+
+		gpe_number = (u32)obj_desc->integer.value;
+	} else if (obj_desc->common.type == ACPI_TYPE_PACKAGE) {
+
+		/* Package contains a GPE reference and GPE number within a GPE block */
+
+		if ((obj_desc->package.count < 2) ||
+		    ((obj_desc->package.elements[0])->common.type !=
+		     ACPI_TYPE_LOCAL_REFERENCE) ||
+		    ((obj_desc->package.elements[1])->common.type !=
+		     ACPI_TYPE_INTEGER)) {
+			goto cleanup;
+		}
+
+		/* Get GPE block reference and decode */
+
+		target_gpe_device =
+		    obj_desc->package.elements[0]->reference.node;
+		gpe_number = (u32)obj_desc->package.elements[1]->integer.value;
+	} else {
+		/* Unknown type, just ignore it */
+
+		goto cleanup;
+	}
+
+	/* Get the gpe_event_info for this GPE */
+
+	if (gpe_device) {
+		/*
+		 * Is this GPE within this block?
+		 *
+		 * TRUE if and only if these conditions are true:
+		 *     1) The GPE devices match.
+		 *     2) The GPE index(number) is within the range of the Gpe Block
+		 *          associated with the GPE device.
+		 */
+		if (gpe_device != target_gpe_device) {
+			goto cleanup;
+		}
+
+		gpe_event_info =
+		    acpi_ev_low_get_gpe_info(gpe_number, gpe_block);
+	} else {
+		/* gpe_device is NULL, just match the target_device and gpe_number */
+
+		gpe_event_info =
+		    acpi_ev_get_gpe_event_info(target_gpe_device, gpe_number);
+	}
+
+	if (gpe_event_info) {
+		if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
+
+			/* This GPE can wake the system */
+
+			gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
+			walk_info->count++;
+		}
+	}
+
+      cleanup:
+	acpi_ut_remove_reference(pkg_desc);
+	return_ACPI_STATUS(AE_OK);
+}
diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c
new file mode 100644
index 00000000000..19a0e513ea4
--- /dev/null
+++ b/drivers/acpi/acpica/evgpeutil.c
@@ -0,0 +1,337 @@
+/******************************************************************************
+ *
+ * Module Name: evgpeutil - GPE utilities
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2010, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acevents.h"
+
+#define _COMPONENT          ACPI_EVENTS
+ACPI_MODULE_NAME("evgpeutil")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_walk_gpe_list
+ *
+ * PARAMETERS:  gpe_walk_callback   - Routine called for each GPE block
+ *              Context             - Value passed to callback
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Walk the GPE lists.
+ *
+ ******************************************************************************/
+acpi_status
+acpi_ev_walk_gpe_list(acpi_gpe_callback gpe_walk_callback, void *context)
+{
+	struct acpi_gpe_block_info *gpe_block;
+	struct acpi_gpe_xrupt_info *gpe_xrupt_info;
+	acpi_status status = AE_OK;
+	acpi_cpu_flags flags;
+
+	ACPI_FUNCTION_TRACE(ev_walk_gpe_list);
+
+	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
+
+	/* Walk the interrupt level descriptor list */
+
+	gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
+	while (gpe_xrupt_info) {
+
+		/* Walk all Gpe Blocks attached to this interrupt level */
+
+		gpe_block = gpe_xrupt_info->gpe_block_list_head;
+		while (gpe_block) {
+
+			/* One callback per GPE block */
+
+			status =
+			    gpe_walk_callback(gpe_xrupt_info, gpe_block,
+					      context);
+			if (ACPI_FAILURE(status)) {
+				if (status == AE_CTRL_END) {	/* Callback abort */
+					status = AE_OK;
+				}
+				goto unlock_and_exit;
+			}
+
+			gpe_block = gpe_block->next;
+		}
+
+		gpe_xrupt_info = gpe_xrupt_info->next;
+	}
+
+      unlock_and_exit:
+	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_valid_gpe_event
+ *
+ * PARAMETERS:  gpe_event_info              - Info for this GPE
+ *
+ * RETURN:      TRUE if the gpe_event is valid
+ *
+ * DESCRIPTION: Validate a GPE event. DO NOT CALL FROM INTERRUPT LEVEL.
+ *              Should be called only when the GPE lists are semaphore locked
+ *              and not subject to change.
+ *
+ ******************************************************************************/
+
+u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info)
+{
+	struct acpi_gpe_xrupt_info *gpe_xrupt_block;
+	struct acpi_gpe_block_info *gpe_block;
+
+	ACPI_FUNCTION_ENTRY();
+
+	/* No need for spin lock since we are not changing any list elements */
+
+	/* Walk the GPE interrupt levels */
+
+	gpe_xrupt_block = acpi_gbl_gpe_xrupt_list_head;
+	while (gpe_xrupt_block) {
+		gpe_block = gpe_xrupt_block->gpe_block_list_head;
+
+		/* Walk the GPE blocks on this interrupt level */
+
+		while (gpe_block) {
+			if ((&gpe_block->event_info[0] <= gpe_event_info) &&
+			    (&gpe_block->event_info[gpe_block->gpe_count] >
+			     gpe_event_info)) {
+				return (TRUE);
+			}
+
+			gpe_block = gpe_block->next;
+		}
+
+		gpe_xrupt_block = gpe_xrupt_block->next;
+	}
+
+	return (FALSE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_get_gpe_xrupt_block
+ *
+ * PARAMETERS:  interrupt_number     - Interrupt for a GPE block
+ *
+ * RETURN:      A GPE interrupt block
+ *
+ * DESCRIPTION: Get or Create a GPE interrupt block. There is one interrupt
+ *              block per unique interrupt level used for GPEs. Should be
+ *              called only when the GPE lists are semaphore locked and not
+ *              subject to change.
+ *
+ ******************************************************************************/
+
+struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32 interrupt_number)
+{
+	struct acpi_gpe_xrupt_info *next_gpe_xrupt;
+	struct acpi_gpe_xrupt_info *gpe_xrupt;
+	acpi_status status;
+	acpi_cpu_flags flags;
+
+	ACPI_FUNCTION_TRACE(ev_get_gpe_xrupt_block);
+
+	/* No need for lock since we are not changing any list elements here */
+
+	next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head;
+	while (next_gpe_xrupt) {
+		if (next_gpe_xrupt->interrupt_number == interrupt_number) {
+			return_PTR(next_gpe_xrupt);
+		}
+
+		next_gpe_xrupt = next_gpe_xrupt->next;
+	}
+
+	/* Not found, must allocate a new xrupt descriptor */
+
+	gpe_xrupt = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_xrupt_info));
+	if (!gpe_xrupt) {
+		return_PTR(NULL);
+	}
+
+	gpe_xrupt->interrupt_number = interrupt_number;
+
+	/* Install new interrupt descriptor with spin lock */
+
+	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
+	if (acpi_gbl_gpe_xrupt_list_head) {
+		next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head;
+		while (next_gpe_xrupt->next) {
+			next_gpe_xrupt = next_gpe_xrupt->next;
+		}
+
+		next_gpe_xrupt->next = gpe_xrupt;
+		gpe_xrupt->previous = next_gpe_xrupt;
+	} else {
+		acpi_gbl_gpe_xrupt_list_head = gpe_xrupt;
+	}
+	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+
+	/* Install new interrupt handler if not SCI_INT */
+
+	if (interrupt_number != acpi_gbl_FADT.sci_interrupt) {
+		status = acpi_os_install_interrupt_handler(interrupt_number,
+							   acpi_ev_gpe_xrupt_handler,
+							   gpe_xrupt);
+		if (ACPI_FAILURE(status)) {
+			ACPI_ERROR((AE_INFO,
+				    "Could not install GPE interrupt handler at level 0x%X",
+				    interrupt_number));
+			return_PTR(NULL);
+		}
+	}
+
+	return_PTR(gpe_xrupt);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_delete_gpe_xrupt
+ *
+ * PARAMETERS:  gpe_xrupt       - A GPE interrupt info block
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Remove and free a gpe_xrupt block. Remove an associated
+ *              interrupt handler if not the SCI interrupt.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt)
+{
+	acpi_status status;
+	acpi_cpu_flags flags;
+
+	ACPI_FUNCTION_TRACE(ev_delete_gpe_xrupt);
+
+	/* We never want to remove the SCI interrupt handler */
+
+	if (gpe_xrupt->interrupt_number == acpi_gbl_FADT.sci_interrupt) {
+		gpe_xrupt->gpe_block_list_head = NULL;
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Disable this interrupt */
+
+	status =
+	    acpi_os_remove_interrupt_handler(gpe_xrupt->interrupt_number,
+					     acpi_ev_gpe_xrupt_handler);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Unlink the interrupt block with lock */
+
+	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
+	if (gpe_xrupt->previous) {
+		gpe_xrupt->previous->next = gpe_xrupt->next;
+	} else {
+		/* No previous, update list head */
+
+		acpi_gbl_gpe_xrupt_list_head = gpe_xrupt->next;
+	}
+
+	if (gpe_xrupt->next) {
+		gpe_xrupt->next->previous = gpe_xrupt->previous;
+	}
+	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+
+	/* Free the block */
+
+	ACPI_FREE(gpe_xrupt);
+	return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_delete_gpe_handlers
+ *
+ * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
+ *              gpe_block           - Gpe Block info
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Delete all Handler objects found in the GPE data structs.
+ *              Used only prior to termination.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
+			    struct acpi_gpe_block_info *gpe_block,
+			    void *context)
+{
+	struct acpi_gpe_event_info *gpe_event_info;
+	u32 i;
+	u32 j;
+
+	ACPI_FUNCTION_TRACE(ev_delete_gpe_handlers);
+
+	/* Examine each GPE Register within the block */
+
+	for (i = 0; i < gpe_block->register_count; i++) {
+
+		/* Now look at the individual GPEs in this byte register */
+
+		for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
+			gpe_event_info = &gpe_block->event_info[((acpi_size) i *
+								 ACPI_GPE_REGISTER_WIDTH)
+								+ j];
+
+			if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
+			    ACPI_GPE_DISPATCH_HANDLER) {
+				ACPI_FREE(gpe_event_info->dispatch.handler);
+				gpe_event_info->dispatch.handler = NULL;
+				gpe_event_info->flags &=
+				    ~ACPI_GPE_DISPATCH_MASK;
+			}
+		}
+	}
+
+	return_ACPI_STATUS(AE_OK);
+}