Spelling fix: explicitly

From: Jean Delvare <khali@linux-fr.org>

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

10 files changed, 12 insertions, 12 deletions

diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index da316d13d7f..21a9c0b69a1 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -906,7 +906,7 @@ static void psmouse_activate(struct psmouse *psmouse)
 
 /*
  * psmouse_deactivate() puts the mouse into poll mode so that we don't get motion
- * reports from it unless we explicitely request it.
+ * reports from it unless we explicitly request it.
  */
 
 static void psmouse_deactivate(struct psmouse *psmouse)
diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c
index 4a321576f34..404eedd5ffa 100644
--- a/drivers/input/mouse/vsxxxaa.c
+++ b/drivers/input/mouse/vsxxxaa.c
@@ -330,7 +330,7 @@ vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse)
 
 	/*
 	 * Check for Power-On-Reset packets. These are sent out
-	 * after plugging the mouse in, or when explicitely
+	 * after plugging the mouse in, or when explicitly
 	 * requested by sending 'T'.
 	 *
 	 * [0]:	1	0	1	0	R3	R2	R1	R0
diff --git a/drivers/isdn/act2000/act2000_isa.c b/drivers/isdn/act2000/act2000_isa.c
index 09ea50dd345..819ea85576a 100644
--- a/drivers/isdn/act2000/act2000_isa.c
+++ b/drivers/isdn/act2000/act2000_isa.c
@@ -126,7 +126,7 @@ act2000_isa_enable_irq(act2000_card * card)
 
 /*
  * Install interrupt handler, enable irq on card.
- * If irq is -1, choose next free irq, else irq is given explicitely.
+ * If irq is -1, choose next free irq, else irq is given explicitly.
  */
 int
 act2000_isa_config_irq(act2000_card * card, short irq)
diff --git a/drivers/isdn/hardware/eicon/capifunc.c b/drivers/isdn/hardware/eicon/capifunc.c
index 82edc1c1db7..4d425c644d4 100644
--- a/drivers/isdn/hardware/eicon/capifunc.c
+++ b/drivers/isdn/hardware/eicon/capifunc.c
@@ -321,7 +321,7 @@ void sendf(APPL * appl, word command, dword Id, word Number, byte * format, ...)
 				  DBG_BLK((((char *)(long)GET_DWORD(&msg.info.data_b3_ind.Data)) + i,
 				  	((dlength - i) < 256) ? (dlength - i) : 256))
 				  if (!(myDriverDebugHandle.dbgMask & DL_PRV0))
-					  break; /* not more if not explicitely requested */
+					  break; /* not more if not explicitly requested */
 				}
 			}
 			break;
@@ -965,7 +965,7 @@ static u16 diva_send_message(struct capi_ctr *ctrl,
 					((GET_WORD(&msg->info.data_b3_req.Data_Length) - j) <
 					  256) ? (GET_WORD(&msg->info.data_b3_req.Data_Length) - j) : 256))
 				if (!(myDriverDebugHandle.dbgMask & DL_PRV0))
-					break;	/* not more if not explicitely requested */
+					break;	/* not more if not explicitly requested */
 			}
 		}
 #endif
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index f7c509b7a8e..dc741d3a453 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -1521,7 +1521,7 @@ pmu_sr_intr(void)
 			req = current_req;
 			/* 
 			 * For PMU sleep and freq change requests, we lock the
-			 * PMU until it's explicitely unlocked. This avoids any
+			 * PMU until it's explicitly unlocked. This avoids any
 			 * spurrious event polling getting in
 			 */
 			current_req = req->next;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h
index 9ecf2bf0d25..47c135a7f4d 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.h
@@ -87,7 +87,7 @@ void bcm43xx_generate_txhdr(struct bcm43xx_private *bcm,
 
 /* RX header as received from the hardware. */
 struct bcm43xx_rxhdr {
-	/* Frame Length. Must be generated explicitely in PIO mode. */
+	/* Frame Length. Must be generated explicitly in PIO mode. */
 	__le16 frame_length;
 	PAD_BYTES(2);
 	/* Flags field 1 */
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index c144e3cdb89..92314c365af 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -6012,7 +6012,7 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
 	 * ends up causing problems.  So, we just handle
 	 * the WX extensions through the ipw2100_ioctl interface */
 
-	/* memset() puts everything to 0, so we only have explicitely set
+	/* memset() puts everything to 0, so we only have explicitly set
 	 * those values that need to be something else */
 
 	/* If power management is turned on, default to AUTO mode */
@@ -7470,7 +7470,7 @@ static int ipw2100_wx_set_power(struct net_device *dev,
 	switch (wrqu->power.flags & IW_POWER_MODE) {
 	case IW_POWER_ON:	/* If not specified */
 	case IW_POWER_MODE:	/* If set all mask */
-	case IW_POWER_ALL_R:	/* If explicitely state all */
+	case IW_POWER_ALL_R:	/* If explicitly state all */
 		break;
 	default:		/* Otherwise we don't support it */
 		IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index feb8fcbab2d..e3c828401b9 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -9603,7 +9603,7 @@ static int ipw_wx_set_power(struct net_device *dev,
 	switch (wrqu->power.flags & IW_POWER_MODE) {
 	case IW_POWER_ON:	/* If not specified */
 	case IW_POWER_MODE:	/* If set all mask */
-	case IW_POWER_ALL_R:	/* If explicitely state all */
+	case IW_POWER_ALL_R:	/* If explicitly state all */
 		break;
 	default:		/* Otherwise we don't support it */
 		IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
diff --git a/drivers/scsi/sym53c8xx_2/sym_fw2.h b/drivers/scsi/sym53c8xx_2/sym_fw2.h
index 6e5b952312e..ae1fb179b88 100644
--- a/drivers/scsi/sym53c8xx_2/sym_fw2.h
+++ b/drivers/scsi/sym53c8xx_2/sym_fw2.h
@@ -1781,7 +1781,7 @@ static struct SYM_FWB_SCR SYM_FWB_SCR = {
 	 *  While testing with bogus QUANTUM drives, the C1010 
 	 *  sometimes raised a spurious phase mismatch with 
 	 *  WSR and the CHMOV(1) triggered another PM.
-	 *  Waiting explicitely for the PHASE seemed to avoid 
+	 *  Waiting explicitly for the PHASE seemed to avoid
 	 *  the nested phase mismatch. Btw, this didn't happen 
 	 *  using my IBM drives.
 	 */
diff --git a/drivers/scsi/wd33c93.h b/drivers/scsi/wd33c93.h
index 61ffb860dac..00123f2383d 100644
--- a/drivers/scsi/wd33c93.h
+++ b/drivers/scsi/wd33c93.h
@@ -155,7 +155,7 @@
 #define WD33C93_FS_12_15 OWNID_FS_12
 #define WD33C93_FS_16_20 OWNID_FS_16
 
-   /* pass input-clock explicitely. accepted mhz values are 8-10,12-20 */
+   /* pass input-clock explicitly. accepted mhz values are 8-10,12-20 */
 #define WD33C93_FS_MHZ(mhz) (mhz)
 
    /* Control register */