summaryrefslogtreecommitdiff
path: root/include/asm-sparc64
diff options
context:
space:
mode:
authorSam Ravnborg <sam@ravnborg.org>2008-06-19 20:26:19 +0200
committerDavid S. Miller <davem@davemloft.net>2008-07-17 21:44:53 -0700
commita00736e936c2a1e9c36f22f6f3a69392eaab51f4 (patch)
tree4fd3d203dbc30d50a1b0c1acce2957e082a75173 /include/asm-sparc64
parentbdc3135ac99efd59de084a309751ec76887e62d8 (diff)
sparc: copy sparc64 specific files to asm-sparc
Used the following script to copy the files: cd include set -e SPARC64=`ls asm-sparc64` for FILE in ${SPARC64}; do if [ -f asm-sparc/$FILE ]; then echo $FILE exist in asm-sparc else git mv asm-sparc64/$FILE asm-sparc/$FILE printf "#include <asm-sparc/$FILE>\n" > asm-sparc64/$FILE git add asm-sparc64/$FILE fi done Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Diffstat (limited to 'include/asm-sparc64')
-rw-r--r--include/asm-sparc64/agp.h21
-rw-r--r--include/asm-sparc64/apb.h37
-rw-r--r--include/asm-sparc64/backoff.h32
-rw-r--r--include/asm-sparc64/bbc.h226
-rw-r--r--include/asm-sparc64/chafsr.h242
-rw-r--r--include/asm-sparc64/chmctrl.h184
-rw-r--r--include/asm-sparc64/cmt.h60
-rw-r--r--include/asm-sparc64/compat.h244
-rw-r--r--include/asm-sparc64/compat_signal.h30
-rw-r--r--include/asm-sparc64/dcr.h15
-rw-r--r--include/asm-sparc64/dcu.h28
-rw-r--r--include/asm-sparc64/estate.h50
-rw-r--r--include/asm-sparc64/fhc.h122
-rw-r--r--include/asm-sparc64/fpumacro.h34
-rw-r--r--include/asm-sparc64/hugetlb.h85
-rw-r--r--include/asm-sparc64/hvtramp.h38
-rw-r--r--include/asm-sparc64/hypervisor.h2946
-rw-r--r--include/asm-sparc64/intr_queue.h16
-rw-r--r--include/asm-sparc64/kprobes.h50
-rw-r--r--include/asm-sparc64/ldc.h139
-rw-r--r--include/asm-sparc64/lmb.h11
-rw-r--r--include/asm-sparc64/lsu.h20
-rw-r--r--include/asm-sparc64/mdesc.h79
-rw-r--r--include/asm-sparc64/mmzone.h18
-rw-r--r--include/asm-sparc64/ns87303.h119
-rw-r--r--include/asm-sparc64/parport.h247
-rw-r--r--include/asm-sparc64/pil.h22
-rw-r--r--include/asm-sparc64/reboot.h7
-rw-r--r--include/asm-sparc64/rwsem-const.h13
-rw-r--r--include/asm-sparc64/rwsem.h85
-rw-r--r--include/asm-sparc64/scratchpad.h15
-rw-r--r--include/asm-sparc64/seccomp.h22
-rw-r--r--include/asm-sparc64/sfafsr.h83
-rw-r--r--include/asm-sparc64/sparsemem.h13
-rw-r--r--include/asm-sparc64/spitfire.h343
-rw-r--r--include/asm-sparc64/sstate.h14
-rw-r--r--include/asm-sparc64/stacktrace.h7
-rw-r--r--include/asm-sparc64/starfire.h22
-rw-r--r--include/asm-sparc64/syscalls.h14
-rw-r--r--include/asm-sparc64/tsb.h284
-rw-r--r--include/asm-sparc64/ttable.h659
-rw-r--r--include/asm-sparc64/upa.h110
-rw-r--r--include/asm-sparc64/vio.h407
-rw-r--r--include/asm-sparc64/visasm.h63
44 files changed, 44 insertions, 7232 deletions
diff --git a/include/asm-sparc64/agp.h b/include/asm-sparc64/agp.h
index e9fcf0e781e..eb8d4b3f516 100644
--- a/include/asm-sparc64/agp.h
+++ b/include/asm-sparc64/agp.h
@@ -1,20 +1 @@
-#ifndef AGP_H
-#define AGP_H 1
-
-/* dummy for now */
-
-#define map_page_into_agp(page)
-#define unmap_page_from_agp(page)
-#define flush_agp_cache() mb()
-
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
-/* GATT allocation. Returns/accepts GATT kernel virtual address. */
-#define alloc_gatt_pages(order) \
- ((char *)__get_free_pages(GFP_KERNEL, (order)))
-#define free_gatt_pages(table, order) \
- free_pages((unsigned long)(table), (order))
-
-#endif
+#include <asm-sparc/agp.h>
diff --git a/include/asm-sparc64/apb.h b/include/asm-sparc64/apb.h
index 8f3b57db810..5e236ca6e49 100644
--- a/include/asm-sparc64/apb.h
+++ b/include/asm-sparc64/apb.h
@@ -1,36 +1 @@
-/*
- * apb.h: Advanced PCI Bridge Configuration Registers and Bits
- *
- * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
- */
-
-#ifndef _SPARC64_APB_H
-#define _SPARC64_APB_H
-
-#define APB_TICK_REGISTER 0xb0
-#define APB_INT_ACK 0xb8
-#define APB_PRIMARY_MASTER_RETRY_LIMIT 0xc0
-#define APB_DMA_ASFR 0xc8
-#define APB_DMA_AFAR 0xd0
-#define APB_PIO_TARGET_RETRY_LIMIT 0xd8
-#define APB_PIO_TARGET_LATENCY_TIMER 0xd9
-#define APB_DMA_TARGET_RETRY_LIMIT 0xda
-#define APB_DMA_TARGET_LATENCY_TIMER 0xdb
-#define APB_SECONDARY_MASTER_RETRY_LIMIT 0xdc
-#define APB_SECONDARY_CONTROL 0xdd
-#define APB_IO_ADDRESS_MAP 0xde
-#define APB_MEM_ADDRESS_MAP 0xdf
-
-#define APB_PCI_CONTROL_LOW 0xe0
-# define APB_PCI_CTL_LOW_ARB_PARK (1 << 21)
-# define APB_PCI_CTL_LOW_ERRINT_EN (1 << 8)
-
-#define APB_PCI_CONTROL_HIGH 0xe4
-# define APB_PCI_CTL_HIGH_SERR (1 << 2)
-# define APB_PCI_CTL_HIGH_ARBITER_EN (1 << 0)
-
-#define APB_PIO_ASFR 0xe8
-#define APB_PIO_AFAR 0xf0
-#define APB_DIAG_REGISTER 0xf8
-
-#endif /* !(_SPARC64_APB_H) */
+#include <asm-sparc/apb.h>
diff --git a/include/asm-sparc64/backoff.h b/include/asm-sparc64/backoff.h
index fa1fdf67e35..8ee26d947e0 100644
--- a/include/asm-sparc64/backoff.h
+++ b/include/asm-sparc64/backoff.h
@@ -1,31 +1 @@
-#ifndef _SPARC64_BACKOFF_H
-#define _SPARC64_BACKOFF_H
-
-#define BACKOFF_LIMIT (4 * 1024)
-
-#ifdef CONFIG_SMP
-
-#define BACKOFF_SETUP(reg) \
- mov 1, reg
-
-#define BACKOFF_SPIN(reg, tmp, label) \
- mov reg, tmp; \
-88: brnz,pt tmp, 88b; \
- sub tmp, 1, tmp; \
- set BACKOFF_LIMIT, tmp; \
- cmp reg, tmp; \
- bg,pn %xcc, label; \
- nop; \
- ba,pt %xcc, label; \
- sllx reg, 1, reg;
-
-#else
-
-#define BACKOFF_SETUP(reg)
-#define BACKOFF_SPIN(reg, tmp, label) \
- ba,pt %xcc, label; \
- nop;
-
-#endif
-
-#endif /* _SPARC64_BACKOFF_H */
+#include <asm-sparc/backoff.h>
diff --git a/include/asm-sparc64/bbc.h b/include/asm-sparc64/bbc.h
index 423a85800aa..06e8b630651 100644
--- a/include/asm-sparc64/bbc.h
+++ b/include/asm-sparc64/bbc.h
@@ -1,225 +1 @@
-/*
- * bbc.h: Defines for BootBus Controller found on UltraSPARC-III
- * systems.
- *
- * Copyright (C) 2000 David S. Miller (davem@redhat.com)
- */
-
-#ifndef _SPARC64_BBC_H
-#define _SPARC64_BBC_H
-
-/* Register sizes are indicated by "B" (Byte, 1-byte),
- * "H" (Half-word, 2 bytes), "W" (Word, 4 bytes) or
- * "Q" (Quad, 8 bytes) inside brackets.
- */
-
-#define BBC_AID 0x00 /* [B] Agent ID */
-#define BBC_DEVP 0x01 /* [B] Device Present */
-#define BBC_ARB 0x02 /* [B] Arbitration */
-#define BBC_QUIESCE 0x03 /* [B] Quiesce */
-#define BBC_WDACTION 0x04 /* [B] Watchdog Action */
-#define BBC_SPG 0x06 /* [B] Soft POR Gen */
-#define BBC_SXG 0x07 /* [B] Soft XIR Gen */
-#define BBC_PSRC 0x08 /* [W] POR Source */
-#define BBC_XSRC 0x0c /* [B] XIR Source */
-#define BBC_CSC 0x0d /* [B] Clock Synthesizers Control*/
-#define BBC_ES_CTRL 0x0e /* [H] Energy Star Control */
-#define BBC_ES_ACT 0x10 /* [W] E* Assert Change Time */
-#define BBC_ES_DACT 0x14 /* [B] E* De-Assert Change Time */
-#define BBC_ES_DABT 0x15 /* [B] E* De-Assert Bypass Time */
-#define BBC_ES_ABT 0x16 /* [H] E* Assert Bypass Time */
-#define BBC_ES_PST 0x18 /* [W] E* PLL Settle Time */
-#define BBC_ES_FSL 0x1c /* [W] E* Frequency Switch Latency*/
-#define BBC_EBUST 0x20 /* [Q] EBUS Timing */
-#define BBC_JTAG_CMD 0x28 /* [W] JTAG+ Command */
-#define BBC_JTAG_CTRL 0x2c /* [B] JTAG+ Control */
-#define BBC_I2C_SEL 0x2d /* [B] I2C Selection */
-#define BBC_I2C_0_S1 0x2e /* [B] I2C ctrlr-0 reg S1 */
-#define BBC_I2C_0_S0 0x2f /* [B] I2C ctrlr-0 regs S0,S0',S2,S3*/
-#define BBC_I2C_1_S1 0x30 /* [B] I2C ctrlr-1 reg S1 */
-#define BBC_I2C_1_S0 0x31 /* [B] I2C ctrlr-1 regs S0,S0',S2,S3*/
-#define BBC_KBD_BEEP 0x32 /* [B] Keyboard Beep */
-#define BBC_KBD_BCNT 0x34 /* [W] Keyboard Beep Counter */
-
-#define BBC_REGS_SIZE 0x40
-
-/* There is a 2K scratch ram area at offset 0x80000 but I doubt
- * we will use it for anything.
- */
-
-/* Agent ID register. This register shows the Safari Agent ID
- * for the processors. The value returned depends upon which
- * cpu is reading the register.
- */
-#define BBC_AID_ID 0x07 /* Safari ID */
-#define BBC_AID_RESV 0xf8 /* Reserved */
-
-/* Device Present register. One can determine which cpus are actually
- * present in the machine by interrogating this register.
- */
-#define BBC_DEVP_CPU0 0x01 /* Processor 0 present */
-#define BBC_DEVP_CPU1 0x02 /* Processor 1 present */
-#define BBC_DEVP_CPU2 0x04 /* Processor 2 present */
-#define BBC_DEVP_CPU3 0x08 /* Processor 3 present */
-#define BBC_DEVP_RESV 0xf0 /* Reserved */
-
-/* Arbitration register. This register is used to block access to
- * the BBC from a particular cpu.
- */
-#define BBC_ARB_CPU0 0x01 /* Enable cpu 0 BBC arbitratrion */
-#define BBC_ARB_CPU1 0x02 /* Enable cpu 1 BBC arbitratrion */
-#define BBC_ARB_CPU2 0x04 /* Enable cpu 2 BBC arbitratrion */
-#define BBC_ARB_CPU3 0x08 /* Enable cpu 3 BBC arbitratrion */
-#define BBC_ARB_RESV 0xf0 /* Reserved */
-
-/* Quiesce register. Bus and BBC segments for cpus can be disabled
- * with this register, ie. for hot plugging.
- */
-#define BBC_QUIESCE_S02 0x01 /* Quiesce Safari segment for cpu 0 and 2 */
-#define BBC_QUIESCE_S13 0x02 /* Quiesce Safari segment for cpu 1 and 3 */
-#define BBC_QUIESCE_B02 0x04 /* Quiesce BBC segment for cpu 0 and 2 */
-#define BBC_QUIESCE_B13 0x08 /* Quiesce BBC segment for cpu 1 and 3 */
-#define BBC_QUIESCE_FD0 0x10 /* Disable Fatal_Error[0] reporting */
-#define BBC_QUIESCE_FD1 0x20 /* Disable Fatal_Error[1] reporting */
-#define BBC_QUIESCE_FD2 0x40 /* Disable Fatal_Error[2] reporting */
-#define BBC_QUIESCE_FD3 0x80 /* Disable Fatal_Error[3] reporting */
-
-/* Watchdog Action register. When the watchdog device timer expires
- * a line is enabled to the BBC. The action BBC takes when this line
- * is asserted can be controlled by this regiser.
- */
-#define BBC_WDACTION_RST 0x01 /* When set, watchdog causes system reset.
- * When clear, BBC ignores watchdog signal.
- */
-#define BBC_WDACTION_RESV 0xfe /* Reserved */
-
-/* Soft_POR_GEN register. The POR (Power On Reset) signal may be asserted
- * for specific processors or all processors via this register.
- */
-#define BBC_SPG_CPU0 0x01 /* Assert POR for processor 0 */
-#define BBC_SPG_CPU1 0x02 /* Assert POR for processor 1 */
-#define BBC_SPG_CPU2 0x04 /* Assert POR for processor 2 */
-#define BBC_SPG_CPU3 0x08 /* Assert POR for processor 3 */
-#define BBC_SPG_CPUALL 0x10 /* Reset all processors and reset
- * the entire system.
- */
-#define BBC_SPG_RESV 0xe0 /* Reserved */
-
-/* Soft_XIR_GEN register. The XIR (eXternally Initiated Reset) signal
- * may be asserted to specific processors via this register.
- */
-#define BBC_SXG_CPU0 0x01 /* Assert XIR for processor 0 */
-#define BBC_SXG_CPU1 0x02 /* Assert XIR for processor 1 */
-#define BBC_SXG_CPU2 0x04 /* Assert XIR for processor 2 */
-#define BBC_SXG_CPU3 0x08 /* Assert XIR for processor 3 */
-#define BBC_SXG_RESV 0xf0 /* Reserved */
-
-/* POR Source register. One may identify the cause of the most recent
- * reset by reading this register.
- */
-#define BBC_PSRC_SPG0 0x0001 /* CPU 0 reset via BBC_SPG register */
-#define BBC_PSRC_SPG1 0x0002 /* CPU 1 reset via BBC_SPG register */
-#define BBC_PSRC_SPG2 0x0004 /* CPU 2 reset via BBC_SPG register */
-#define BBC_PSRC_SPG3 0x0008 /* CPU 3 reset via BBC_SPG register */
-#define BBC_PSRC_SPGSYS 0x0010 /* System reset via BBC_SPG register */
-#define BBC_PSRC_JTAG 0x0020 /* System reset via JTAG+ */
-#define BBC_PSRC_BUTTON 0x0040 /* System reset via push-button dongle */
-#define BBC_PSRC_PWRUP 0x0080 /* System reset via power-up */
-#define BBC_PSRC_FE0 0x0100 /* CPU 0 reported Fatal_Error */
-#define BBC_PSRC_FE1 0x0200 /* CPU 1 reported Fatal_Error */
-#define BBC_PSRC_FE2 0x0400 /* CPU 2 reported Fatal_Error */
-#define BBC_PSRC_FE3 0x0800 /* CPU 3 reported Fatal_Error */
-#define BBC_PSRC_FE4 0x1000 /* Schizo reported Fatal_Error */
-#define BBC_PSRC_FE5 0x2000 /* Safari device 5 reported Fatal_Error */
-#define BBC_PSRC_FE6 0x4000 /* CPMS reported Fatal_Error */
-#define BBC_PSRC_SYNTH 0x8000 /* System reset when on-board clock synthesizers
- * were updated.
- */
-#define BBC_PSRC_WDT 0x10000 /* System reset via Super I/O watchdog */
-#define BBC_PSRC_RSC 0x20000 /* System reset via RSC remote monitoring
- * device
- */
-
-/* XIR Source register. The source of an XIR event sent to a processor may
- * be determined via this register.
- */
-#define BBC_XSRC_SXG0 0x01 /* CPU 0 received XIR via Soft_XIR_GEN reg */
-#define BBC_XSRC_SXG1 0x02 /* CPU 1 received XIR via Soft_XIR_GEN reg */
-#define BBC_XSRC_SXG2 0x04 /* CPU 2 received XIR via Soft_XIR_GEN reg */
-#define BBC_XSRC_SXG3 0x08 /* CPU 3 received XIR via Soft_XIR_GEN reg */
-#define BBC_XSRC_JTAG 0x10 /* All CPUs received XIR via JTAG+ */
-#define BBC_XSRC_W_OR_B 0x20 /* All CPUs received XIR either because:
- * a) Super I/O watchdog fired, or
- * b) XIR push button was activated
- */
-#define BBC_XSRC_RESV 0xc0 /* Reserved */
-
-/* Clock Synthesizers Control register. This register provides the big-bang
- * programming interface to the two clock synthesizers of the machine.
- */
-#define BBC_CSC_SLOAD 0x01 /* Directly connected to S_LOAD pins */
-#define BBC_CSC_SDATA 0x02 /* Directly connected to S_DATA pins */
-#define BBC_CSC_SCLOCK 0x04 /* Directly connected to S_CLOCK pins */
-#define BBC_CSC_RESV 0x78 /* Reserved */
-#define BBC_CSC_RST 0x80 /* Generate system reset when S_LOAD==1 */
-
-/* Energy Star Control register. This register is used to generate the
- * clock frequency change trigger to the main system devices (Schizo and
- * the processors). The transition occurs when bits in this register
- * go from 0 to 1, only one bit must be set at once else no action
- * occurs. Basically the sequence of events is:
- * a) Choose new frequency: full, 1/2 or 1/32
- * b) Program this desired frequency into the cpus and Schizo.
- * c) Set the same value in this register.
- * d) 16 system clocks later, clear this register.
- */
-#define BBC_ES_CTRL_1_1 0x01 /* Full frequency */
-#define BBC_ES_CTRL_1_2 0x02 /* 1/2 frequency */
-#define BBC_ES_CTRL_1_32 0x20 /* 1/32 frequency */
-#define BBC_ES_RESV 0xdc /* Reserved */
-
-/* Energy Star Assert Change Time register. This determines the number
- * of BBC clock cycles (which is half the system frequency) between
- * the detection of FREEZE_ACK being asserted and the assertion of
- * the CLK_CHANGE_L[2:0] signals.
- */
-#define BBC_ES_ACT_VAL 0xff
-
-/* Energy Star Assert Bypass Time register. This determines the number
- * of BBC clock cycles (which is half the system frequency) between
- * the assertion of the CLK_CHANGE_L[2:0] signals and the assertion of
- * the ESTAR_PLL_BYPASS signal.
- */
-#define BBC_ES_ABT_VAL 0xffff
-
-/* Energy Star PLL Settle Time register. This determines the number of
- * BBC clock cycles (which is half the system frequency) between the
- * de-assertion of CLK_CHANGE_L[2:0] and the de-assertion of the FREEZE_L
- * signal.
- */
-#define BBC_ES_PST_VAL 0xffffffff
-
-/* Energy Star Frequency Switch Latency register. This is the number of
- * BBC clocks between the de-assertion of CLK_CHANGE_L[2:0] and the first
- * edge of the Safari clock at the new frequency.
- */
-#define BBC_ES_FSL_VAL 0xffffffff
-
-/* Keyboard Beep control register. This is a simple enabler for the audio
- * beep sound.
- */
-#define BBC_KBD_BEEP_ENABLE 0x01 /* Enable beep */
-#define BBC_KBD_BEEP_RESV 0xfe /* Reserved */
-
-/* Keyboard Beep Counter register. There is a free-running counter inside
- * the BBC which runs at half the system clock. The bit set in this register
- * determines when the audio sound is generated. So for example if bit
- * 10 is set, the audio beep will oscillate at 1/(2**12). The keyboard beep
- * generator automatically selects a different bit to use if the system clock
- * is changed via Energy Star.
- */
-#define BBC_KBD_BCNT_BITS 0x0007fc00
-#define BBC_KBC_BCNT_RESV 0xfff803ff
-
-#endif /* _SPARC64_BBC_H */
-
+#include <asm-sparc/bbc.h>
diff --git a/include/asm-sparc64/chafsr.h b/include/asm-sparc64/chafsr.h
index 85c69b38220..aaab97562a3 100644
--- a/include/asm-sparc64/chafsr.h
+++ b/include/asm-sparc64/chafsr.h
@@ -1,241 +1 @@
-#ifndef _SPARC64_CHAFSR_H
-#define _SPARC64_CHAFSR_H
-
-/* Cheetah Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */
-
-/* Comments indicate which processor variants on which the bit definition
- * is valid. Codes are:
- * ch --> cheetah
- * ch+ --> cheetah plus
- * jp --> jalapeno
- */
-
-/* All bits of this register except M_SYNDROME and E_SYNDROME are
- * read, write 1 to clear. M_SYNDROME and E_SYNDROME are read-only.
- */
-
-/* Software bit set by linux trap handlers to indicate that the trap was
- * signalled at %tl >= 1.
- */
-#define CHAFSR_TL1 (1UL << 63UL) /* n/a */
-
-/* Unmapped error from system bus for prefetch queue or
- * store queue read operation
- */
-#define CHPAFSR_DTO (1UL << 59UL) /* ch+ */
-
-/* Bus error from system bus for prefetch queue or store queue
- * read operation
- */
-#define CHPAFSR_DBERR (1UL << 58UL) /* ch+ */
-
-/* Hardware corrected E-cache Tag ECC error */
-#define CHPAFSR_THCE (1UL << 57UL) /* ch+ */
-/* System interface protocol error, hw timeout caused */
-#define JPAFSR_JETO (1UL << 57UL) /* jp */
-
-/* SW handled correctable E-cache Tag ECC error */
-#define CHPAFSR_TSCE (1UL << 56UL) /* ch+ */
-/* Parity error on system snoop results */
-#define JPAFSR_SCE (1UL << 56UL) /* jp */
-
-/* Uncorrectable E-cache Tag ECC error */
-#define CHPAFSR_TUE (1UL << 55UL) /* ch+ */
-/* System interface protocol error, illegal command detected */
-#define JPAFSR_JEIC (1UL << 55UL) /* jp */
-
-/* Uncorrectable system bus data ECC error due to prefetch
- * or store fill request
- */
-#define CHPAFSR_DUE (1UL << 54UL) /* ch+ */
-/* System interface protocol error, illegal ADTYPE detected */
-#define JPAFSR_JEIT (1UL << 54UL) /* jp */
-
-/* Multiple errors of the same type have occurred. This bit is set when
- * an uncorrectable error or a SW correctable error occurs and the status
- * bit to report that error is already set. When multiple errors of
- * different types are indicated by setting multiple status bits.
- *
- * This bit is not set if multiple HW corrected errors with the same
- * status bit occur, only uncorrectable and SW correctable ones have
- * this behavior.
- *
- * This bit is not set when multiple ECC errors happen within a single
- * 64-byte system bus transaction. Only the first ECC error in a 16-byte
- * subunit will be logged. All errors in subsequent 16-byte subunits
- * from the same 64-byte transaction are ignored.
- */
-#define CHAFSR_ME (1UL << 53UL) /* ch,ch+,jp */
-
-/* Privileged state error has occurred. This is a capture of PSTATE.PRIV
- * at the time the error is detected.
- */
-#define CHAFSR_PRIV (1UL << 52UL) /* ch,ch+,jp */
-
-/* The following bits 51 (CHAFSR_PERR) to 33 (CHAFSR_CE) are sticky error
- * bits and record the most recently detected errors. Bits accumulate
- * errors that have been detected since the last write to clear the bit.
- */
-
-/* System interface protocol error. The processor asserts its' ERROR
- * pin when this event occurs and it also logs a specific cause code
- * into a JTAG scannable flop.
- */
-#define CHAFSR_PERR (1UL << 51UL) /* ch,ch+,jp */
-
-/* Internal processor error. The processor asserts its' ERROR
- * pin when this event occurs and it also logs a specific cause code
- * into a JTAG scannable flop.
- */
-#define CHAFSR_IERR (1UL << 50UL) /* ch,ch+,jp */
-
-/* System request parity error on incoming address */
-#define CHAFSR_ISAP (1UL << 49UL) /* ch,ch+,jp */
-
-/* HW Corrected system bus MTAG ECC error */
-#define CHAFSR_EMC (1UL << 48UL) /* ch,ch+ */
-/* Parity error on L2 cache tag SRAM */
-#define JPAFSR_ETP (1UL << 48UL) /* jp */
-
-/* Uncorrectable system bus MTAG ECC error */
-#define CHAFSR_EMU (1UL << 47UL) /* ch,ch+ */
-/* Out of range memory error has occurred */
-#define JPAFSR_OM (1UL << 47UL) /* jp */
-
-/* HW Corrected system bus data ECC error for read of interrupt vector */
-#define CHAFSR_IVC (1UL << 46UL) /* ch,ch+ */
-/* Error due to unsupported store */
-#define JPAFSR_UMS (1UL << 46UL) /* jp */
-
-/* Uncorrectable system bus data ECC error for read of interrupt vector */
-#define CHAFSR_IVU (1UL << 45UL) /* ch,ch+,jp */
-
-/* Unmapped error from system bus */
-#define CHAFSR_TO (1UL << 44UL) /* ch,ch+,jp */
-
-/* Bus error response from system bus */
-#define CHAFSR_BERR (1UL << 43UL) /* ch,ch+,jp */
-
-/* SW Correctable E-cache ECC error for instruction fetch or data access
- * other than block load.
- */
-#define CHAFSR_UCC (1UL << 42UL) /* ch,ch+,jp */
-
-/* Uncorrectable E-cache ECC error for instruction fetch or data access
- * other than block load.
- */
-#define CHAFSR_UCU (1UL << 41UL) /* ch,ch+,jp */
-
-/* Copyout HW Corrected ECC error */
-#define CHAFSR_CPC (1UL << 40UL) /* ch,ch+,jp */
-
-/* Copyout Uncorrectable ECC error */
-#define CHAFSR_CPU (1UL << 39UL) /* ch,ch+,jp */
-
-/* HW Corrected ECC error from E-cache for writeback */
-#define CHAFSR_WDC (1UL << 38UL) /* ch,ch+,jp */
-
-/* Uncorrectable ECC error from E-cache for writeback */
-#define CHAFSR_WDU (1UL << 37UL) /* ch,ch+,jp */
-
-/* HW Corrected ECC error from E-cache for store merge or block load */
-#define CHAFSR_EDC (1UL << 36UL) /* ch,ch+,jp */
-
-/* Uncorrectable ECC error from E-cache for store merge or block load */
-#define CHAFSR_EDU (1UL << 35UL) /* ch,ch+,jp */
-
-/* Uncorrectable system bus data ECC error for read of memory or I/O */
-#define CHAFSR_UE (1UL << 34UL) /* ch,ch+,jp */
-
-/* HW Corrected system bus data ECC error for read of memory or I/O */
-#define CHAFSR_CE (1UL << 33UL) /* ch,ch+,jp */
-
-/* Uncorrectable ECC error from remote cache/memory */
-#define JPAFSR_RUE (1UL << 32UL) /* jp */
-
-/* Correctable ECC error from remote cache/memory */
-#define JPAFSR_RCE (1UL << 31UL) /* jp */
-
-/* JBUS parity error on returned read data */
-#define JPAFSR_BP (1UL << 30UL) /* jp */
-
-/* JBUS parity error on data for writeback or block store */
-#define JPAFSR_WBP (1UL << 29UL) /* jp */
-
-/* Foreign read to DRAM incurring correctable ECC error */
-#define JPAFSR_FRC (1UL << 28UL) /* jp */
-
-/* Foreign read to DRAM incurring uncorrectable ECC error */
-#define JPAFSR_FRU (1UL << 27UL) /* jp */
-
-#define CHAFSR_ERRORS (CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
- CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
- CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
- CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
- CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
-#define CHPAFSR_ERRORS (CHPAFSR_DTO | CHPAFSR_DBERR | CHPAFSR_THCE | \
- CHPAFSR_TSCE | CHPAFSR_TUE | CHPAFSR_DUE | \
- CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
- CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
- CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
- CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
- CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
-#define JPAFSR_ERRORS (JPAFSR_JETO | JPAFSR_SCE | JPAFSR_JEIC | \
- JPAFSR_JEIT | CHAFSR_PERR | CHAFSR_IERR | \
- CHAFSR_ISAP | JPAFSR_ETP | JPAFSR_OM | \
- JPAFSR_UMS | CHAFSR_IVU | CHAFSR_TO | \
- CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | \
- CHAFSR_CPC | CHAFSR_CPU | CHAFSR_WDC | \
- CHAFSR_WDU | CHAFSR_EDC | CHAFSR_EDU | \
- CHAFSR_UE | CHAFSR_CE | JPAFSR_RUE | \
- JPAFSR_RCE | JPAFSR_BP | JPAFSR_WBP | \
- JPAFSR_FRC | JPAFSR_FRU)
-
-/* Active JBUS request signal when error occurred */
-#define JPAFSR_JBREQ (0x7UL << 24UL) /* jp */
-#define JPAFSR_JBREQ_SHIFT 24UL
-
-/* L2 cache way information */
-#define JPAFSR_ETW (0x3UL << 22UL) /* jp */
-#define JPAFSR_ETW_SHIFT 22UL
-
-/* System bus MTAG ECC syndrome. This field captures the status of the
- * first occurrence of the highest-priority error according to the M_SYND
- * overwrite policy. After the AFSR sticky bit, corresponding to the error
- * for which the M_SYND is reported, is cleared, the contents of the M_SYND
- * field will be unchanged by will be unfrozen for further error capture.
- */
-#define CHAFSR_M_SYNDROME (0xfUL << 16UL) /* ch,ch+,jp */
-#define CHAFSR_M_SYNDROME_SHIFT 16UL
-
-/* Agenid Id of the foreign device causing the UE/CE errors */
-#define JPAFSR_AID (0x1fUL << 9UL) /* jp */
-#define JPAFSR_AID_SHIFT 9UL
-
-/* System bus or E-cache data ECC syndrome. This field captures the status
- * of the first occurrence of the highest-priority error according to the
- * E_SYND overwrite policy. After the AFSR sticky bit, corresponding to the
- * error for which the E_SYND is reported, is cleare, the contents of the E_SYND
- * field will be unchanged but will be unfrozen for further error capture.
- */
-#define CHAFSR_E_SYNDROME (0x1ffUL << 0UL) /* ch,ch+,jp */
-#define CHAFSR_E_SYNDROME_SHIFT 0UL
-
-/* The AFSR must be explicitly cleared by software, it is not cleared automatically
- * by a read. Writes to bits <51:33> with bits set will clear the corresponding
- * bits in the AFSR. Bits associated with disrupting traps must be cleared before
- * interrupts are re-enabled to prevent multiple traps for the same error. I.e.
- * PSTATE.IE and AFSR bits control delivery of disrupting traps.
- *
- * Since there is only one AFAR, when multiple events have been logged by the
- * bits in the AFSR, at most one of these events will have its status captured
- * in the AFAR. The highest priority of those event bits will get AFAR logging.
- * The AFAR will be unlocked and available to capture the address of another event
- * as soon as the one bit in AFSR that corresponds to the event logged in AFAR is
- * cleared. For example, if AFSR.CE is detected, then AFSR.UE (which overwrites
- * the AFAR), and AFSR.UE is cleared by not AFSR.CE, then the AFAR will be unlocked
- * and ready for another event, even though AFSR.CE is still set. The same rules
- * also apply to the M_SYNDROME and E_SYNDROME fields of the AFSR.
- */
-
-#endif /* _SPARC64_CHAFSR_H */
+#include <asm-sparc/chafsr.h>
diff --git a/include/asm-sparc64/chmctrl.h b/include/asm-sparc64/chmctrl.h
index 859b4a4b0d3..eb757b483b3 100644
--- a/include/asm-sparc64/chmctrl.h
+++ b/include/asm-sparc64/chmctrl.h
@@ -1,183 +1 @@
-#ifndef _SPARC64_CHMCTRL_H
-#define _SPARC64_CHMCTRL_H
-
-/* Cheetah memory controller programmable registers. */
-#define CHMCTRL_TCTRL1 0x00 /* Memory Timing Control I */
-#define CHMCTRL_TCTRL2 0x08 /* Memory Timing Control II */
-#define CHMCTRL_TCTRL3 0x38 /* Memory Timing Control III */
-#define CHMCTRL_TCTRL4 0x40 /* Memory Timing Control IV */
-#define CHMCTRL_DECODE1 0x10 /* Memory Address Decode I */
-#define CHMCTRL_DECODE2 0x18 /* Memory Address Decode II */
-#define CHMCTRL_DECODE3 0x20 /* Memory Address Decode III */
-#define CHMCTRL_DECODE4 0x28 /* Memory Address Decode IV */
-#define CHMCTRL_MACTRL 0x30 /* Memory Address Control */
-
-/* Memory Timing Control I */
-#define TCTRL1_SDRAMCTL_DLY 0xf000000000000000UL
-#define TCTRL1_SDRAMCTL_DLY_SHIFT 60
-#define TCTRL1_SDRAMCLK_DLY 0x0e00000000000000UL
-#define TCTRL1_SDRAMCLK_DLY_SHIFT 57
-#define TCTRL1_R 0x0100000000000000UL
-#define TCTRL1_R_SHIFT 56
-#define TCTRL1_AUTORFR_CYCLE 0x00fe000000000000UL
-#define TCTRL1_AUTORFR_CYCLE_SHIFT 49
-#define TCTRL1_RD_WAIT 0x0001f00000000000UL
-#define TCTRL1_RD_WAIT_SHIFT 44
-#define TCTRL1_PC_CYCLE 0x00000fc000000000UL
-#define TCTRL1_PC_CYCLE_SHIFT 38
-#define TCTRL1_WR_MORE_RAS_PW 0x0000003f00000000UL
-#define TCTRL1_WR_MORE_RAS_PW_SHIFT 32
-#define TCTRL1_RD_MORE_RAW_PW 0x00000000fc000000UL
-#define TCTRL1_RD_MORE_RAS_PW_SHIFT 26
-#define TCTRL1_ACT_WR_DLY 0x0000000003f00000UL
-#define TCTRL1_ACT_WR_DLY_SHIFT 20
-#define TCTRL1_ACT_RD_DLY 0x00000000000fc000UL
-#define TCTRL1_ACT_RD_DLY_SHIFT 14
-#define TCTRL1_BANK_PRESENT 0x0000000000003000UL
-#define TCTRL1_BANK_PRESENT_SHIFT 12
-#define TCTRL1_RFR_INT 0x0000000000000ff8UL
-#define TCTRL1_RFR_INT_SHIFT 3
-#define TCTRL1_SET_MODE_REG 0x0000000000000004UL
-#define TCTRL1_SET_MODE_REG_SHIFT 2
-#define TCTRL1_RFR_ENABLE 0x0000000000000002UL
-#define TCTRL1_RFR_ENABLE_SHIFT 1
-#define TCTRL1_PRECHG_ALL 0x0000000000000001UL
-#define TCTRL1_PRECHG_ALL_SHIFT 0
-
-/* Memory Timing Control II */
-#define TCTRL2_WR_MSEL_DLY 0xfc00000000000000UL
-#define TCTRL2_WR_MSEL_DLY_SHIFT 58
-#define TCTRL2_RD_MSEL_DLY 0x03f0000000000000UL
-#define TCTRL2_RD_MSEL_DLY_SHIFT 52
-#define TCTRL2_WRDATA_THLD 0x000c000000000000UL
-#define TCTRL2_WRDATA_THLD_SHIFT 50
-#define TCTRL2_RDWR_RD_TI_DLY 0x0003f00000000000UL
-#define TCTRL2_RDWR_RD_TI_DLY_SHIFT 44
-#define TCTRL2_AUTOPRECHG_ENBL 0x0000080000000000UL
-#define TCTRL2_AUTOPRECHG_ENBL_SHIFT 43
-#define TCTRL2_RDWR_PI_MORE_DLY 0x000007c000000000UL
-#define TCTRL2_RDWR_PI_MORE_DLY_SHIFT 38
-#define TCTRL2_RDWR_1_DLY 0x0000003f00000000UL
-#define TCTRL2_RDWR_1_DLY_SHIFT 32
-#define TCTRL2_WRWR_PI_MORE_DLY 0x00000000f8000000UL
-#define TCTRL2_WRWR_PI_MORE_DLY_SHIFT 27
-#define TCTRL2_WRWR_1_DLY 0x0000000007e00000UL
-#define TCTRL2_WRWR_1_DLY_SHIFT 21
-#define TCTRL2_RDWR_RD_PI_MORE_DLY 0x00000000001f0000UL
-#define TCTRL2_RDWR_RD_PI_MORE_DLY_SHIFT 16
-#define TCTRL2_R 0x0000000000008000UL
-#define TCTRL2_R_SHIFT 15
-#define TCTRL2_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
-#define TCTRL2_SDRAM_MODE_REG_DATA_SHIFT 0
-
-/* Memory Timing Control III */
-#define TCTRL3_SDRAM_CTL_DLY 0xf000000000000000UL
-#define TCTRL3_SDRAM_CTL_DLY_SHIFT 60
-#define TCTRL3_SDRAM_CLK_DLY 0x0e00000000000000UL
-#define TCTRL3_SDRAM_CLK_DLY_SHIFT 57
-#define TCTRL3_R 0x0100000000000000UL
-#define TCTRL3_R_SHIFT 56
-#define TCTRL3_AUTO_RFR_CYCLE 0x00fe000000000000UL
-#define TCTRL3_AUTO_RFR_CYCLE_SHIFT 49
-#define TCTRL3_RD_WAIT 0x0001f00000000000UL
-#define TCTRL3_RD_WAIT_SHIFT 44
-#define TCTRL3_PC_CYCLE 0x00000fc000000000UL
-#define TCTRL3_PC_CYCLE_SHIFT 38
-#define TCTRL3_WR_MORE_RAW_PW 0x0000003f00000000UL
-#define TCTRL3_WR_MORE_RAW_PW_SHIFT 32
-#define TCTRL3_RD_MORE_RAW_PW 0x00000000fc000000UL
-#define TCTRL3_RD_MORE_RAW_PW_SHIFT 26
-#define TCTRL3_ACT_WR_DLY 0x0000000003f00000UL
-#define TCTRL3_ACT_WR_DLY_SHIFT 20
-#define TCTRL3_ACT_RD_DLY 0x00000000000fc000UL
-#define TCTRL3_ACT_RD_DLY_SHIFT 14
-#define TCTRL3_BANK_PRESENT 0x0000000000003000UL
-#define TCTRL3_BANK_PRESENT_SHIFT 12
-#define TCTRL3_RFR_INT 0x0000000000000ff8UL
-#define TCTRL3_RFR_INT_SHIFT 3
-#define TCTRL3_SET_MODE_REG 0x0000000000000004UL
-#define TCTRL3_SET_MODE_REG_SHIFT 2
-#define TCTRL3_RFR_ENABLE 0x0000000000000002UL
-#define TCTRL3_RFR_ENABLE_SHIFT 1
-#define TCTRL3_PRECHG_ALL 0x0000000000000001UL
-#define TCTRL3_PRECHG_ALL_SHIFT 0
-
-/* Memory Timing Control IV */
-#define TCTRL4_WR_MSEL_DLY 0xfc00000000000000UL
-#define TCTRL4_WR_MSEL_DLY_SHIFT 58
-#define TCTRL4_RD_MSEL_DLY 0x03f0000000000000UL
-#define TCTRL4_RD_MSEL_DLY_SHIFT 52
-#define TCTRL4_WRDATA_THLD 0x000c000000000000UL
-#define TCTRL4_WRDATA_THLD_SHIFT 50
-#define TCTRL4_RDWR_RD_RI_DLY 0x0003f00000000000UL
-#define TCTRL4_RDWR_RD_RI_DLY_SHIFT 44
-#define TCTRL4_AUTO_PRECHG_ENBL 0x0000080000000000UL
-#define TCTRL4_AUTO_PRECHG_ENBL_SHIFT 43
-#define TCTRL4_RD_WR_PI_MORE_DLY 0x000007c000000000UL
-#define TCTRL4_RD_WR_PI_MORE_DLY_SHIFT 38
-#define TCTRL4_RD_WR_TI_DLY 0x0000003f00000000UL
-#define TCTRL4_RD_WR_TI_DLY_SHIFT 32
-#define TCTRL4_WR_WR_PI_MORE_DLY 0x00000000f8000000UL
-#define TCTRL4_WR_WR_PI_MORE_DLY_SHIFT 27
-#define TCTRL4_WR_WR_TI_DLY 0x0000000007e00000UL
-#define TCTRL4_WR_WR_TI_DLY_SHIFT 21
-#define TCTRL4_RDWR_RD_PI_MORE_DLY 0x00000000001f000UL0
-#define TCTRL4_RDWR_RD_PI_MORE_DLY_SHIFT 16
-#define TCTRL4_R 0x0000000000008000UL
-#define TCTRL4_R_SHIFT 15
-#define TCTRL4_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
-#define TCTRL4_SDRAM_MODE_REG_DATA_SHIFT 0
-
-/* All 4 memory address decoding registers have the
- * same layout.
- */
-#define MEM_DECODE_VALID 0x8000000000000000UL /* Valid */
-#define MEM_DECODE_VALID_SHIFT 63
-#define MEM_DECODE_UK 0x001ffe0000000000UL /* Upper mask */
-#define MEM_DECODE_UK_SHIFT 41
-#define MEM_DECODE_UM 0x0000001ffff00000UL /* Upper match */
-#define MEM_DECODE_UM_SHIFT 20
-#define MEM_DECODE_LK 0x000000000003c000UL /* Lower mask */
-#define MEM_DECODE_LK_SHIFT 14
-#define MEM_DECODE_LM 0x0000000000000f00UL /* Lower match */
-#define MEM_DECODE_LM_SHIFT 8
-
-#define PA_UPPER_BITS 0x000007fffc000000UL
-#define PA_UPPER_BITS_SHIFT 26
-#define PA_LOWER_BITS 0x00000000000003c0UL
-#define PA_LOWER_BITS_SHIFT 6
-
-#define MACTRL_R0 0x8000000000000000UL
-#define MACTRL_R0_SHIFT 63
-#define MACTRL_ADDR_LE_PW 0x7000000000000000UL
-#define MACTRL_ADDR_LE_PW_SHIFT 60
-#define MACTRL_CMD_PW 0x0f00000000000000UL
-#define MACTRL_CMD_PW_SHIFT 56
-#define MACTRL_HALF_MODE_WR_MSEL_DLY 0x00fc000000000000UL
-#define MACTRL_HALF_MODE_WR_MSEL_DLY_SHIFT 50
-#define MACTRL_HALF_MODE_RD_MSEL_DLY 0x0003f00000000000UL
-#define MACTRL_HALF_MODE_RD_MSEL_DLY_SHIFT 44
-#define MACTRL_HALF_MODE_SDRAM_CTL_DLY 0x00000f0000000000UL
-#define MACTRL_HALF_MODE_SDRAM_CTL_DLY_SHIFT 40
-#define MACTRL_HALF_MODE_SDRAM_CLK_DLY 0x000000e000000000UL
-#define MACTRL_HALF_MODE_SDRAM_CLK_DLY_SHIFT 37
-#define MACTRL_R1 0x0000001000000000UL
-#define MACTRL_R1_SHIFT 36
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3 0x0000000f00000000UL
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3_SHIFT 32
-#define MACTRL_ENC_INTLV_B3 0x00000000f8000000UL
-#define MACTRL_ENC_INTLV_B3_SHIFT 27
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2 0x0000000007800000UL
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2_SHIFT 23
-#define MACTRL_ENC_INTLV_B2 0x00000000007c0000UL
-#define MACTRL_ENC_INTLV_B2_SHIFT 18
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1 0x000000000003c000UL
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1_SHIFT 14
-#define MACTRL_ENC_INTLV_B1 0x0000000000003e00UL
-#define MACTRL_ENC_INTLV_B1_SHIFT 9
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0 0x00000000000001e0UL
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0_SHIFT 5
-#define MACTRL_ENC_INTLV_B0 0x000000000000001fUL
-#define MACTRL_ENC_INTLV_B0_SHIFT 0
-
-#endif /* _SPARC64_CHMCTRL_H */
+#include <asm-sparc/chmctrl.h>
diff --git a/include/asm-sparc64/cmt.h b/include/asm-sparc64/cmt.h
index 870db592857..b19b445cb81 100644
--- a/include/asm-sparc64/cmt.h
+++ b/include/asm-sparc64/cmt.h
@@ -1,59 +1 @@
-#ifndef _SPARC64_CMT_H
-#define _SPARC64_CMT_H
-
-/* cmt.h: Chip Multi-Threading register definitions
- *
- * Copyright (C) 2004 David S. Miller (davem@redhat.com)
- */
-
-/* ASI_CORE_ID - private */
-#define LP_ID 0x0000000000000010UL
-#define LP_ID_MAX 0x00000000003f0000UL
-#define LP_ID_ID 0x000000000000003fUL
-
-/* ASI_INTR_ID - private */
-#define LP_INTR_ID 0x0000000000000000UL
-#define LP_INTR_ID_ID 0x00000000000003ffUL
-
-/* ASI_CESR_ID - private */
-#define CESR_ID 0x0000000000000040UL
-#define CESR_ID_ID 0x00000000000000ffUL
-
-/* ASI_CORE_AVAILABLE - shared */
-#define LP_AVAIL 0x0000000000000000UL
-#define LP_AVAIL_1 0x0000000000000002UL
-#define LP_AVAIL_0 0x0000000000000001UL
-
-/* ASI_CORE_ENABLE_STATUS - shared */
-#define LP_ENAB_STAT 0x0000000000000010UL
-#define LP_ENAB_STAT_1 0x0000000000000002UL
-#define LP_ENAB_STAT_0 0x0000000000000001UL
-
-/* ASI_CORE_ENABLE - shared */
-#define LP_ENAB 0x0000000000000020UL
-#define LP_ENAB_1 0x0000000000000002UL
-#define LP_ENAB_0 0x0000000000000001UL
-
-/* ASI_CORE_RUNNING - shared */
-#define LP_RUNNING_RW 0x0000000000000050UL
-#define LP_RUNNING_W1S 0x0000000000000060UL
-#define LP_RUNNING_W1C 0x0000000000000068UL
-#define LP_RUNNING_1 0x0000000000000002UL
-#define LP_RUNNING_0 0x0000000000000001UL
-
-/* ASI_CORE_RUNNING_STAT - shared */
-#define LP_RUN_STAT 0x0000000000000058UL
-#define LP_RUN_STAT_1 0x0000000000000002UL
-#define LP_RUN_STAT_0 0x0000000000000001UL
-
-/* ASI_XIR_STEERING - shared */
-#define LP_XIR_STEER 0x0000000000000030UL
-#define LP_XIR_STEER_1 0x0000000000000002UL
-#define LP_XIR_STEER_0 0x0000000000000001UL
-
-/* ASI_CMT_ERROR_STEERING - shared */
-#define CMT_ER_STEER 0x0000000000000040UL
-#define CMT_ER_STEER_1 0x0000000000000002UL
-#define CMT_ER_STEER_0 0x0000000000000001UL
-
-#endif /* _SPARC64_CMT_H */
+#include <asm-sparc/cmt.h>
diff --git a/include/asm-sparc64/compat.h b/include/asm-sparc64/compat.h
index f260b58f5ce..8c155d22195 100644
--- a/include/asm-sparc64/compat.h
+++ b/include/asm-sparc64/compat.h
@@ -1,243 +1 @@
-#ifndef _ASM_SPARC64_COMPAT_H
-#define _ASM_SPARC64_COMPAT_H
-/*
- * Architecture specific compatibility types
- */
-#include <linux/types.h>
-
-#define COMPAT_USER_HZ 100
-
-typedef u32 compat_size_t;
-typedef s32 compat_ssize_t;
-typedef s32 compat_time_t;
-typedef s32 compat_clock_t;
-typedef s32 compat_pid_t;
-typedef u16 __compat_uid_t;
-typedef u16 __compat_gid_t;
-typedef u32 __compat_uid32_t;
-typedef u32 __compat_gid32_t;
-typedef u16 compat_mode_t;
-typedef u32 compat_ino_t;
-typedef u16 compat_dev_t;
-typedef s32 compat_off_t;
-typedef s64 compat_loff_t;
-typedef s16 compat_nlink_t;
-typedef u16 compat_ipc_pid_t;
-typedef s32 compat_daddr_t;
-typedef u32 compat_caddr_t;
-typedef __kernel_fsid_t compat_fsid_t;
-typedef s32 compat_key_t;
-typedef s32 compat_timer_t;
-
-typedef s32 compat_int_t;
-typedef s32 compat_long_t;
-typedef s64 compat_s64;
-typedef u32 compat_uint_t;
-typedef u32 compat_ulong_t;
-typedef u64 compat_u64;
-
-struct compat_timespec {
- compat_time_t tv_sec;
- s32 tv_nsec;
-};
-
-struct compat_timeval {
- compat_time_t tv_sec;
- s32 tv_usec;
-};
-
-struct compat_stat {
- compat_dev_t st_dev;
- compat_ino_t st_ino;
- compat_mode_t st_mode;
- compat_nlink_t st_nlink;
- __compat_uid_t st_uid;
- __compat_gid_t st_gid;
- compat_dev_t st_rdev;
- compat_off_t st_size;
- compat_time_t st_atime;
- compat_ulong_t st_atime_nsec;
- compat_time_t st_mtime;
- compat_ulong_t st_mtime_nsec;
- compat_time_t st_ctime;
- compat_ulong_t st_ctime_nsec;
- compat_off_t st_blksize;
- compat_off_t st_blocks;
- u32 __unused4[2];
-};
-
-struct compat_stat64 {
- unsigned long long st_dev;
-
- unsigned long long st_ino;
-
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned int st_uid;
- unsigned int st_gid;
-
- unsigned long long st_rdev;
-
- unsigned char __pad3[8];
-
- long long st_size;
- unsigned int st_blksize;
-
- unsigned char __pad4[8];
- unsigned int st_blocks;
-
- unsigned int st_atime;
- unsigned int st_atime_nsec;
-
- unsigned int st_mtime;
- unsigned int st_mtime_nsec;
-
- unsigned int st_ctime;
- unsigned int st_ctime_nsec;
-
- unsigned int __unused4;
- unsigned int __unused5;
-};
-
-struct compat_flock {
- short l_type;
- short l_whence;
- compat_off_t l_start;
- compat_off_t l_len;
- compat_pid_t l_pid;
- short __unused;
-};
-
-#define F_GETLK64 12
-#define F_SETLK64 13
-#define F_SETLKW64 14
-
-struct compat_flock64 {
- short l_type;
- short l_whence;
- compat_loff_t l_start;
- compat_loff_t l_len;
- compat_pid_t l_pid;
- short __unused;
-};
-
-struct compat_statfs {
- int f_type;
- int f_bsize;
- int f_blocks;
- int f_bfree;
- int f_bavail;
- int f_files;
- int f_ffree;
- compat_fsid_t f_fsid;
- int f_namelen; /* SunOS ignores this field. */
- int f_frsize;
- int f_spare[5];
-};
-
-#define COMPAT_RLIM_INFINITY 0x7fffffff
-
-typedef u32 compat_old_sigset_t;
-
-#define _COMPAT_NSIG 64
-#define _COMPAT_NSIG_BPW 32
-
-typedef u32 compat_sigset_word;
-
-#define COMPAT_OFF_T_MAX 0x7fffffff
-#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
-
-/*
- * A pointer passed in from user mode. This should not
- * be used for syscall parameters, just declare them
- * as pointers because the syscall entry code will have
- * appropriately converted them already.
- */
-typedef u32 compat_uptr_t;
-
-static inline void __user *compat_ptr(compat_uptr_t uptr)
-{
- return (void __user *)(unsigned long)uptr;
-}
-
-static inline compat_uptr_t ptr_to_compat(void __user *uptr)
-{
- return (u32)(unsigned long)uptr;
-}
-
-static inline void __user *compat_alloc_user_space(long len)
-{
- struct pt_regs *regs = current_thread_info()->kregs;
- unsigned long usp = regs->u_regs[UREG_I6];
-
- if (!(test_thread_flag(TIF_32BIT)))
- usp += STACK_BIAS;
- else
- usp &= 0xffffffffUL;
-
- usp -= len;
- usp &= ~0x7UL;
-
- return (void __user *) usp;
-}
-
-struct compat_ipc64_perm {
- compat_key_t key;
- __compat_uid32_t uid;
- __compat_gid32_t gid;
- __compat_uid32_t cuid;
- __compat_gid32_t cgid;
- unsigned short __pad1;
- compat_mode_t mode;
- unsigned short __pad2;
- unsigned short seq;
- unsigned long __unused1; /* yes they really are 64bit pads */
- unsigned long __unused2;
-};
-
-struct compat_semid64_ds {
- struct compat_ipc64_perm sem_perm;
- unsigned int __pad1;
- compat_time_t sem_otime;
- unsigned int __pad2;
- compat_time_t sem_ctime;
- u32 sem_nsems;
- u32 __unused1;
- u32 __unused2;
-};
-
-struct compat_msqid64_ds {
- struct compat_ipc64_perm msg_perm;
- unsigned int __pad1;
- compat_time_t msg_stime;
- unsigned int __pad2;
- compat_time_t msg_rtime;
- unsigned int __pad3;
- compat_time_t msg_ctime;
- unsigned int msg_cbytes;
- unsigned int msg_qnum;
- unsigned int msg_qbytes;
- compat_pid_t msg_lspid;
- compat_pid_t msg_lrpid;
- unsigned int __unused1;
- unsigned int __unused2;
-};
-
-struct compat_shmid64_ds {
- struct compat_ipc64_perm shm_perm;
- unsigned int __pad1;
- compat_time_t shm_atime;
- unsigned int __pad2;
- compat_time_t shm_dtime;
- unsigned int __pad3;
- compat_time_t shm_ctime;
- compat_size_t shm_segsz;
- compat_pid_t shm_cpid;
- compat_pid_t shm_lpid;
- unsigned int shm_nattch;
- unsigned int __unused1;
- unsigned int __unused2;
-};
-
-#endif /* _ASM_SPARC64_COMPAT_H */
+#include <asm-sparc/compat.h>
diff --git a/include/asm-sparc64/compat_signal.h b/include/asm-sparc64/compat_signal.h
index b759eab9b51..7187dcc8cac 100644
--- a/include/asm-sparc64/compat_signal.h
+++ b/include/asm-sparc64/compat_signal.h
@@ -1,29 +1 @@
-#ifndef _COMPAT_SIGNAL_H
-#define _COMPAT_SIGNAL_H
-
-#include <linux/compat.h>
-#include <asm/signal.h>
-
-#ifdef CONFIG_COMPAT
-struct __new_sigaction32 {
- unsigned sa_handler;
- unsigned int sa_flags;
- unsigned sa_restorer; /* not used by Linux/SPARC yet */
- compat_sigset_t sa_mask;
-};
-
-struct __old_sigaction32 {
- unsigned sa_handler;
- compat_old_sigset_t sa_mask;
- unsigned int sa_flags;
- unsigned sa_restorer; /* not used by Linux/SPARC yet */
-};
-
-typedef struct sigaltstack32 {
- u32 ss_sp;
- int ss_flags;
- compat_size_t ss_size;
-} stack_t32;
-#endif
-
-#endif /* !(_COMPAT_SIGNAL_H) */
+#include <asm-sparc/compat_signal.h>
diff --git a/include/asm-sparc64/dcr.h b/include/asm-sparc64/dcr.h
index 620c9ba642e..d67613b1f5f 100644
--- a/include/asm-sparc64/dcr.h
+++ b/include/asm-sparc64/dcr.h
@@ -1,14 +1 @@
-#ifndef _SPARC64_DCR_H
-#define _SPARC64_DCR_H
-
-/* UltraSparc-III/III+ Dispatch Control Register, ASR 0x12 */
-#define DCR_DPE 0x0000000000001000 /* III+: D$ Parity Error Enable */
-#define DCR_OBS 0x0000000000000fc0 /* Observability Bus Controls */
-#define DCR_BPE 0x0000000000000020 /* Branch Predict Enable */
-#define DCR_RPE 0x0000000000000010 /* Return Address Prediction Enable */
-#define DCR_SI 0x0000000000000008 /* Single Instruction Disable */
-#define DCR_IPE 0x0000000000000004 /* III+: I$ Parity Error Enable */
-#define DCR_IFPOE 0x0000000000000002 /* IRQ FP Operation Enable */
-#define DCR_MS 0x0000000000000001 /* Multi-Scalar dispatch */
-
-#endif /* _SPARC64_DCR_H */
+#include <asm-sparc/dcr.h>
diff --git a/include/asm-sparc64/dcu.h b/include/asm-sparc64/dcu.h
index 0f704e106a1..28853f4968d 100644
--- a/include/asm-sparc64/dcu.h
+++ b/include/asm-sparc64/dcu.h
@@ -1,27 +1 @@
-#ifndef _SPARC64_DCU_H
-#define _SPARC64_DCU_H
-
-#include <linux/const.h>
-
-/* UltraSparc-III Data Cache Unit Control Register */
-#define DCU_CP _AC(0x0002000000000000,UL) /* Phys Cache Enable w/o mmu */
-#define DCU_CV _AC(0x0001000000000000,UL) /* Virt Cache Enable w/o mmu */
-#define DCU_ME _AC(0x0000800000000000,UL) /* NC-store Merging Enable */
-#define DCU_RE _AC(0x0000400000000000,UL) /* RAW bypass Enable */
-#define DCU_PE _AC(0x0000200000000000,UL) /* PCache Enable */
-#define DCU_HPE _AC(0x0000100000000000,UL) /* HW prefetch Enable */
-#define DCU_SPE _AC(0x0000080000000000,UL) /* SW prefetch Enable */
-#define DCU_SL _AC(0x0000040000000000,UL) /* Secondary ld-steering Enab*/
-#define DCU_WE _AC(0x0000020000000000,UL) /* WCache enable */
-#define DCU_PM _AC(0x000001fe00000000,UL) /* PA Watchpoint Byte Mask */
-#define DCU_VM _AC(0x00000001fe000000,UL) /* VA Watchpoint Byte Mask */
-#define DCU_PR _AC(0x0000000001000000,UL) /* PA Watchpoint Read Enable */
-#define DCU_PW _AC(0x0000000000800000,UL) /* PA Watchpoint Write Enable*/
-#define DCU_VR _AC(0x0000000000400000,UL) /* VA Watchpoint Read Enable */
-#define DCU_VW _AC(0x0000000000200000,UL) /* VA Watchpoint Write Enable*/
-#define DCU_DM _AC(0x0000000000000008,UL) /* DMMU Enable */
-#define DCU_IM _AC(0x0000000000000004,UL) /* IMMU Enable */
-#define DCU_DC _AC(0x0000000000000002,UL) /* Data Cache Enable */
-#define DCU_IC _AC(0x0000000000000001,UL) /* Instruction Cache Enable */
-
-#endif /* _SPARC64_DCU_H */
+#include <asm-sparc/dcu.h>
diff --git a/include/asm-sparc64/estate.h b/include/asm-sparc64/estate.h
index 520c08560d1..bedd0ef5f19 100644
--- a/include/asm-sparc64/estate.h
+++ b/include/asm-sparc64/estate.h
@@ -1,49 +1 @@
-#ifndef _SPARC64_ESTATE_H
-#define _SPARC64_ESTATE_H
-
-/* UltraSPARC-III E-cache Error Enable */
-#define ESTATE_ERROR_FMT 0x0000000000040000 /* Force MTAG ECC */
-#define ESTATE_ERROR_FMESS 0x000000000003c000 /* Forced MTAG ECC val */
-#define ESTATE_ERROR_FMD 0x0000000000002000 /* Force DATA ECC */
-#define ESTATE_ERROR_FDECC 0x0000000000001ff0 /* Forced DATA ECC val */
-#define ESTATE_ERROR_UCEEN 0x0000000000000008 /* See below */
-#define ESTATE_ERROR_NCEEN 0x0000000000000002 /* See below */
-#define ESTATE_ERROR_CEEN 0x0000000000000001 /* See below */
-
-/* UCEEN enables the fast_ECC_error trap for: 1) software correctable E-cache
- * errors 2) uncorrectable E-cache errors. Such events only occur on reads
- * of the E-cache by the local processor for: 1) data loads 2) instruction
- * fetches 3) atomic operations. Such events _cannot_ occur for: 1) merge
- * 2) writeback 2) copyout. The AFSR bits associated with these traps are
- * UCC and UCU.
- */
-
-/* NCEEN enables instruction_access_error, data_access_error, and ECC_error traps
- * for uncorrectable ECC errors and system errors.
- *
- * Uncorrectable system bus data error or MTAG ECC error, system bus TimeOUT,
- * or system bus BusERR:
- * 1) As the result of an instruction fetch, will generate instruction_access_error
- * 2) As the result of a load etc. will generate data_access_error.
- * 3) As the result of store merge completion, writeback, or copyout will
- * generate a disrupting ECC_error trap.
- * 4) As the result of such errors on instruction vector fetch can generate any
- * of the 3 trap types.
- *
- * The AFSR bits associated with these traps are EMU, EDU, WDU, CPU, IVU, UE,
- * BERR, and TO.
- */
-
-/* CEEN enables the ECC_error trap for hardware corrected ECC errors. System bus
- * reads resulting in a hardware corrected data or MTAG ECC error will generate an
- * ECC_error disrupting trap with this bit enabled.
- *
- * This same trap will also be generated when a hardware corrected ECC error results
- * during store merge, writeback, and copyout operations.
- */
-
-/* In general, if the trap enable bits above are disabled the AFSR bits will still
- * log the events even though the trap will not be generated by the processor.
- */
-
-#endif /* _SPARC64_ESTATE_H */
+#include <asm-sparc/estate.h>
diff --git a/include/asm-sparc64/fhc.h b/include/asm-sparc64/fhc.h
index 788cbc46a11..73eb04c19c4 100644
--- a/include/asm-sparc64/fhc.h
+++ b/include/asm-sparc64/fhc.h
@@ -1,121 +1 @@
-/*
- * fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire.
- *
- * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com)
- */
-
-#ifndef _SPARC64_FHC_H
-#define _SPARC64_FHC_H
-
-#include <linux/timer.h>
-
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/upa.h>
-
-struct linux_fhc;
-
-/* Clock board register offsets. */
-#define CLOCK_CTRL 0x00UL /* Main control */
-#define CLOCK_STAT1 0x10UL /* Status one */
-#define CLOCK_STAT2 0x20UL /* Status two */
-#define CLOCK_PWRSTAT 0x30UL /* Power status */
-#define CLOCK_PWRPRES 0x40UL /* Power presence */
-#define CLOCK_TEMP 0x50UL /* Temperature */
-#define CLOCK_IRQDIAG 0x60UL /* IRQ diagnostics */
-#define CLOCK_PWRSTAT2 0x70UL /* Power status two */
-
-#define CLOCK_CTRL_LLED 0x04 /* Left LED, 0 == on */
-#define CLOCK_CTRL_MLED 0x02 /* Mid LED, 1 == on */
-#define CLOCK_CTRL_RLED 0x01 /* RIght LED, 1 == on */
-
-struct linux_central {
- struct linux_fhc *child;
- unsigned long cfreg;
- unsigned long clkregs;
- unsigned long clkver;
- int slots;
- struct device_node *prom_node;
-
- struct linux_prom_ranges central_ranges[PROMREG_MAX];
- int num_central_ranges;
-};
-
-/* Firehose controller register offsets */
-struct fhc_regs {
- unsigned long pregs; /* FHC internal regs */
-#define FHC_PREGS_ID 0x00UL /* FHC ID */
-#define FHC_ID_VERS 0xf0000000 /* Version of this FHC */
-#define FHC_ID_PARTID 0x0ffff000 /* Part ID code (0x0f9f == FHC) */
-#define FHC_ID_MANUF 0x0000007e /* Manufacturer (0x3e == SUN's JEDEC)*/
-#define FHC_ID_RESV 0x00000001 /* Read as one */
-#define FHC_PREGS_RCS 0x10UL /* FHC Reset Control/Status Register */
-#define FHC_RCS_POR 0x80000000 /* Last reset was a power cycle */
-#define FHC_RCS_SPOR 0x40000000 /* Last reset was sw power on reset */
-#define FHC_RCS_SXIR 0x20000000 /* Last reset was sw XIR reset */
-#define FHC_RCS_BPOR 0x10000000 /* Last reset was due to POR button */
-#define FHC_RCS_BXIR 0x08000000 /* Last reset was due to XIR button */
-#define FHC_RCS_WEVENT 0x04000000 /* CPU reset was due to wakeup event */
-#define FHC_RCS_CFATAL 0x02000000 /* Centerplane Fatal Error signalled */
-#define FHC_RCS_FENAB 0x01000000 /* Fatal errors elicit system reset */
-#define FHC_PREGS_CTRL 0x20UL /* FHC Control Register */
-#define FHC_CONTROL_ICS 0x00100000 /* Ignore Centerplane Signals */
-#define FHC_CONTROL_FRST 0x00080000 /* Fatal Error Reset Enable */
-#define FHC_CONTROL_LFAT 0x00040000 /* AC/DC signalled a local error */
-#define FHC_CONTROL_SLINE 0x00010000 /* Firmware Synchronization Line */
-#define FHC_CONTROL_DCD 0x00008000 /* DC-->DC Converter Disable */
-#define FHC_CONTROL_POFF 0x00004000 /* AC/DC Controller PLL Disable */
-#define FHC_CONTROL_FOFF 0x00002000 /* FHC Controller PLL Disable */
-#define FHC_CONTROL_AOFF 0x00001000 /* CPU A SRAM/SBD Low Power Mode */
-#define FHC_CONTROL_BOFF 0x00000800 /* CPU B SRAM/SBD Low Power Mode */
-#define FHC_CONTROL_PSOFF 0x00000400 /* Turns off this FHC's power supply */
-#define FHC_CONTROL_IXIST 0x00000200 /* 0=FHC tells clock board it exists */
-#define FHC_CONTROL_XMSTR 0x00000100 /* 1=Causes this FHC to be XIR master*/
-#define FHC_CONTROL_LLED 0x00000040 /* 0=Left LED ON */
-#define FHC_CONTROL_MLED 0x00000020 /* 1=Middle LED ON */
-#define FHC_CONTROL_RLED 0x00000010 /* 1=Right LED */
-#define FHC_CONTROL_BPINS 0x00000003 /* Spare Bidirectional Pins */
-#define FHC_PREGS_BSR 0x30UL /* FHC Board Status Register */
-#define FHC_BSR_DA64 0x00040000 /* Port A: 0=128bit 1=64bit data path */
-#define FHC_BSR_DB64 0x00020000 /* Port B: 0=128bit 1=64bit data path */
-#define FHC_BSR_BID 0x0001e000 /* Board ID */
-#define FHC_BSR_SA 0x00001c00 /* Port A UPA Speed (from the pins) */
-#define FHC_BSR_SB 0x00000380 /* Port B UPA Speed (from the pins) */
-#define FHC_BSR_NDIAG 0x00000040 /* Not in Diag Mode */
-#define FHC_BSR_NTBED 0x00000020 /* Not in TestBED Mode */
-#define FHC_BSR_NIA 0x0000001c /* Jumper, bit 18 in PROM space */
-#define FHC_BSR_SI 0x00000001 /* Spare input pin value */
-#define FHC_PREGS_ECC 0x40UL /* FHC ECC Control Register (16 bits) */
-#define FHC_PREGS_JCTRL 0xf0UL /* FHC JTAG Control Register */
-#define FHC_JTAG_CTRL_MENAB 0x80000000 /* Indicates this is JTAG Master */
-#define FHC_JTAG_CTRL_MNONE 0x40000000 /* Indicates no JTAG Master present */
-#define FHC_PREGS_JCMD 0x100UL /* FHC JTAG Command Register */
- unsigned long ireg; /* FHC IGN reg */
-#define FHC_IREG_IGN 0x00UL /* This FHC's IGN */
- unsigned long ffregs; /* FHC fanfail regs */
-#define FHC_FFREGS_IMAP 0x00UL /* FHC Fanfail IMAP */
-#define FHC_FFREGS_ICLR 0x10UL /* FHC Fanfail ICLR */
- unsigned long sregs; /* FHC system regs */
-#define FHC_SREGS_IMAP 0x00UL /* FHC System IMAP */
-#define FHC_SREGS_ICLR 0x10UL /* FHC System ICLR */
- unsigned long uregs; /* FHC uart regs */
-#define FHC_UREGS_IMAP 0x00UL /* FHC Uart IMAP */
-#define FHC_UREGS_ICLR 0x10UL /* FHC Uart ICLR */
- unsigned long tregs; /* FHC TOD regs */
-#define FHC_TREGS_IMAP 0x00UL /* FHC TOD IMAP */
-#define FHC_TREGS_ICLR 0x10UL /* FHC TOD ICLR */
-};
-
-struct linux_fhc {
- struct linux_fhc *next;
- struct linux_central *parent; /* NULL if not central FHC */
- struct fhc_regs fhc_regs;
- int board;
- int jtag_master;
- struct device_node *prom_node;
-
- struct linux_prom_ranges fhc_ranges[PROMREG_MAX];
- int num_fhc_ranges;
-};
-
-#endif /* !(_SPARC64_FHC_H) */
+#include <asm-sparc/fhc.h>
diff --git a/include/asm-sparc64/fpumacro.h b/include/asm-sparc64/fpumacro.h
index cc463fec806..30d6d0f68bc 100644
--- a/include/asm-sparc64/fpumacro.h
+++ b/include/asm-sparc64/fpumacro.h
@@ -1,33 +1 @@
-/* fpumacro.h: FPU related macros.
- *
- * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC64_FPUMACRO_H
-#define _SPARC64_FPUMACRO_H
-
-#include <asm/asi.h>
-#include <asm/visasm.h>
-
-struct fpustate {
- u32 regs[64];
-};
-
-#define FPUSTATE (struct fpustate *)(current_thread_info()->fpregs)
-
-static inline unsigned long fprs_read(void)
-{
- unsigned long retval;
-
- __asm__ __volatile__("rd %%fprs, %0" : "=r" (retval));
-
- return retval;
-}
-
-static inline void fprs_write(unsigned long val)
-{
- __asm__ __volatile__("wr %0, 0x0, %%fprs" : : "r" (val));
-}
-
-#endif /* !(_SPARC64_FPUMACRO_H) */
+#include <asm-sparc/fpumacro.h>
diff --git a/include/asm-sparc64/hugetlb.h b/include/asm-sparc64/hugetlb.h
index 412af58926a..21d8f0a9c24 100644
--- a/include/asm-sparc64/hugetlb.h
+++ b/include/asm-sparc64/hugetlb.h
@@ -1,84 +1 @@
-#ifndef _ASM_SPARC64_HUGETLB_H
-#define _ASM_SPARC64_HUGETLB_H
-
-#include <asm/page.h>
-
-
-void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte);
-
-pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep);
-
-void hugetlb_prefault_arch_hook(struct mm_struct *mm);
-
-static inline int is_hugepage_only_range(struct mm_struct *mm,
- unsigned long addr,
- unsigned long len) {
- return 0;
-}
-
-/*
- * If the arch doesn't supply something else, assume that hugepage
- * size aligned regions are ok without further preparation.
- */
-static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
-{
- if (len & ~HPAGE_MASK)
- return -EINVAL;
- if (addr & ~HPAGE_MASK)
- return -EINVAL;
- return 0;
-}
-
-static inline void hugetlb_free_pgd_range(struct mmu_gather **tlb,
- unsigned long addr, unsigned long end,
- unsigned long floor,
- unsigned long ceiling)
-{
- free_pgd_range(tlb, addr, end, floor, ceiling);
-}
-
-static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
- unsigned long addr, pte_t *ptep)
-{
-}
-
-static inline int huge_pte_none(pte_t pte)
-{
- return pte_none(pte);
-}
-
-static inline pte_t huge_pte_wrprotect(pte_t pte)
-{
- return pte_wrprotect(pte);
-}
-
-static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
- unsigned long addr, pte_t *ptep)
-{
- ptep_set_wrprotect(mm, addr, ptep);
-}
-
-static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
- unsigned long addr, pte_t *ptep,
- pte_t pte, int dirty)
-{
- return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
-}
-
-static inline pte_t huge_ptep_get(pte_t *ptep)
-{
- return *ptep;
-}
-
-static inline int arch_prepare_hugepage(struct page *page)
-{
- return 0;
-}
-
-static inline void arch_release_hugepage(struct page *page)
-{
-}
-
-#endif /* _ASM_SPARC64_HUGETLB_H */
+#include <asm-sparc/hugetlb.h>
diff --git a/include/asm-sparc64/hvtramp.h b/include/asm-sparc64/hvtramp.h
index b2b9b947b3a..fb46bfe934a 100644
--- a/include/asm-sparc64/hvtramp.h
+++ b/include/asm-sparc64/hvtramp.h
@@ -1,37 +1 @@
-#ifndef _SPARC64_HVTRAP_H
-#define _SPARC64_HVTRAP_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-struct hvtramp_mapping {
- __u64 vaddr;
- __u64 tte;
-};
-
-struct hvtramp_descr {
- __u32 cpu;
- __u32 num_mappings;
- __u64 fault_info_va;
- __u64 fault_info_pa;
- __u64 thread_reg;
- struct hvtramp_mapping maps[1];
-};
-
-extern void hv_cpu_startup(unsigned long hvdescr_pa);
-
-#endif
-
-#define HVTRAMP_DESCR_CPU 0x00
-#define HVTRAMP_DESCR_NUM_MAPPINGS 0x04
-#define HVTRAMP_DESCR_FAULT_INFO_VA 0x08
-#define HVTRAMP_DESCR_FAULT_INFO_PA 0x10
-#define HVTRAMP_DESCR_THREAD_REG 0x18
-#define HVTRAMP_DESCR_MAPS 0x20
-
-#define HVTRAMP_MAPPING_VADDR 0x00
-#define HVTRAMP_MAPPING_TTE 0x08
-#define HVTRAMP_MAPPING_SIZE 0x10
-
-#endif /* _SPARC64_HVTRAP_H */
+#include <asm-sparc/hvtramp.h>
diff --git a/include/asm-sparc64/hypervisor.h b/include/asm-sparc64/hypervisor.h
index 3ad45dff52f..fe7e51a9e42 100644
--- a/include/asm-sparc64/hypervisor.h
+++ b/include/asm-sparc64/hypervisor.h
@@ -1,2945 +1 @@
-#ifndef _SPARC64_HYPERVISOR_H
-#define _SPARC64_HYPERVISOR_H
-
-/* Sun4v hypervisor interfaces and defines.
- *
- * Hypervisor calls are made via traps to software traps number 0x80
- * and above. Registers %o0 to %o5 serve as argument, status, and
- * return value registers.
- *
- * There are two kinds of these traps. First there are the normal
- * "fast traps" which use software trap 0x80 and encode the function
- * to invoke by number in register %o5. Argument and return value
- * handling is as follows:
- *
- * -----------------------------------------------
- * | %o5 | function number | undefined |
- * | %o0 | argument 0 | return status |
- * | %o1 | argument 1 | return value 1 |
- * | %o2 | argument 2 | return value 2 |
- * | %o3 | argument 3 | return value 3 |
- * | %o4 | argument 4 | return value 4 |
- * -----------------------------------------------
- *
- * The second type are "hyper-fast traps" which encode the function
- * number in the software trap number itself. So these use trap
- * numbers > 0x80. The register usage for hyper-fast traps is as
- * follows:
- *
- * -----------------------------------------------
- * | %o0 | argument 0 | return status |
- * | %o1 | argument 1 | return value 1 |
- * | %o2 | argument 2 | return value 2 |
- * | %o3 | argument 3 | return value 3 |
- * | %o4 | argument 4 | return value 4 |
- * -----------------------------------------------
- *
- * Registers providing explicit arguments to the hypervisor calls
- * are volatile across the call. Upon return their values are
- * undefined unless explicitly specified as containing a particular
- * return value by the specific call. The return status is always
- * returned in register %o0, zero indicates a successful execution of
- * the hypervisor call and other values indicate an error status as
- * defined below. So, for example, if a hyper-fast trap takes
- * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across
- * the call and %o3, %o4, and %o5 would be preserved.
- *
- * If the hypervisor trap is invalid, or the fast trap function number
- * is invalid, HV_EBADTRAP will be returned in %o0. Also, all 64-bits
- * of the argument and return values are significant.
- */
-
-/* Trap numbers. */
-#define HV_FAST_TRAP 0x80
-#define HV_MMU_MAP_ADDR_TRAP 0x83
-#define HV_MMU_UNMAP_ADDR_TRAP 0x84
-#define HV_TTRACE_ADDENTRY_TRAP 0x85
-#define HV_CORE_TRAP 0xff
-
-/* Error codes. */
-#define HV_EOK 0 /* Successful return */
-#define HV_ENOCPU 1 /* Invalid CPU id */
-#define HV_ENORADDR 2 /* Invalid real address */
-#define HV_ENOINTR 3 /* Invalid interrupt id */
-#define HV_EBADPGSZ 4 /* Invalid pagesize encoding */
-#define HV_EBADTSB 5 /* Invalid TSB description */
-#define HV_EINVAL 6 /* Invalid argument */
-#define HV_EBADTRAP 7 /* Invalid function number */
-#define HV_EBADALIGN 8 /* Invalid address alignment */
-#define HV_EWOULDBLOCK 9 /* Cannot complete w/o blocking */
-#define HV_ENOACCESS 10 /* No access to resource */
-#define HV_EIO 11 /* I/O error */
-#define HV_ECPUERROR 12 /* CPU in error state */
-#define HV_ENOTSUPPORTED 13 /* Function not supported */
-#define HV_ENOMAP 14 /* No mapping found */
-#define HV_ETOOMANY 15 /* Too many items specified */
-#define HV_ECHANNEL 16 /* Invalid LDC channel */
-#define HV_EBUSY 17 /* Resource busy */
-
-/* mach_exit()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MACH_EXIT
- * ARG0: exit code
- * ERRORS: This service does not return.
- *
- * Stop all CPUs in the virtual domain and place them into the stopped
- * state. The 64-bit exit code may be passed to a service entity as
- * the domain's exit status. On systems without a service entity, the
- * domain will undergo a reset, and the boot firmware will be
- * reloaded.
- *
- * This function will never return to the guest that invokes it.
- *
- * Note: By convention an exit code of zero denotes a successful exit by
- * the guest code. A non-zero exit code denotes a guest specific
- * error indication.
- *
- */
-#define HV_FAST_MACH_EXIT 0x00
-
-#ifndef __ASSEMBLY__
-extern void sun4v_mach_exit(unsigned long exit_code);
-#endif
-
-/* Domain services. */
-
-/* mach_desc()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MACH_DESC
- * ARG0: buffer
- * ARG1: length
- * RET0: status
- * RET1: length
- * ERRORS: HV_EBADALIGN Buffer is badly aligned
- * HV_ENORADDR Buffer is to an illegal real address.
- * HV_EINVAL Buffer length is too small for complete
- * machine description.
- *
- * Copy the most current machine description into the buffer indicated
- * by the real address in ARG0. The buffer provided must be 16 byte
- * aligned. Upon success or HV_EINVAL, this service returns the
- * actual size of the machine description in the RET1 return value.
- *
- * Note: A method of determining the appropriate buffer size for the
- * machine description is to first call this service with a buffer
- * length of 0 bytes.
- */
-#define HV_FAST_MACH_DESC 0x01
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mach_desc(unsigned long buffer_pa,
- unsigned long buf_len,
- unsigned long *real_buf_len);
-#endif
-
-/* mach_sir()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MACH_SIR
- * ERRORS: This service does not return.
- *
- * Perform a software initiated reset of the virtual machine domain.
- * All CPUs are captured as soon as possible, all hardware devices are
- * returned to the entry default state, and the domain is restarted at
- * the SIR (trap type 0x04) real trap table (RTBA) entry point on one
- * of the CPUs. The single CPU restarted is selected as determined by
- * platform specific policy. Memory is preserved across this
- * operation.
- */
-#define HV_FAST_MACH_SIR 0x02
-
-#ifndef __ASSEMBLY__
-extern void sun4v_mach_sir(void);
-#endif
-
-/* mach_set_watchdog()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MACH_SET_WATCHDOG
- * ARG0: timeout in milliseconds
- * RET0: status
- * RET1: time remaining in milliseconds
- *
- * A guest uses this API to set a watchdog timer. Once the gues has set
- * the timer, it must call the timer service again either to disable or
- * postpone the expiration. If the timer expires before being reset or
- * disabled, then the hypervisor take a platform specific action leading
- * to guest termination within a bounded time period. The platform action
- * may include recovery actions such as reporting the expiration to a
- * Service Processor, and/or automatically restarting the gues.
- *
- * The 'timeout' parameter is specified in milliseconds, however the
- * implementated granularity is given by the 'watchdog-resolution'
- * property in the 'platform' node of the guest's machine description.
- * The largest allowed timeout value is specified by the
- * 'watchdog-max-timeout' property of the 'platform' node.
- *
- * If the 'timeout' argument is not zero, the watchdog timer is set to
- * expire after a minimum of 'timeout' milliseconds.
- *
- * If the 'timeout' argument is zero, the watchdog timer is disabled.
- *
- * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout'
- * property, the hypervisor leaves the watchdog timer state unchanged,
- * and returns a status of EINVAL.
- *
- * The 'time remaining' return value is valid regardless of whether the
- * return status is EOK or EINVAL. A non-zero return value indicates the
- * number of milliseconds that were remaining until the timer was to expire.
- * If less than one millisecond remains, the return value is '1'. If the
- * watchdog timer was disabled at the time of the call, the return value is
- * zero.
- *
- * If the hypervisor cannot support the exact timeout value requested, but
- * can support a larger timeout value, the hypervisor may round the actual
- * timeout to a value larger than the requested timeout, consequently the
- * 'time remaining' return value may be larger than the previously requested
- * timeout value.
- *
- * Any guest OS debugger should be aware that the watchdog service may be in
- * use. Consequently, it is recommended that the watchdog service is
- * disabled upon debugger entry (e.g. reaching a breakpoint), and then
- * re-enabled upon returning to normal execution. The API has been designed
- * with this in mind, and the 'time remaining' result of the disable call may
- * be used directly as the timeout argument of the re-enable call.
- */
-#define HV_FAST_MACH_SET_WATCHDOG 0x05
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout,
- unsigned long *orig_timeout);
-#endif
-
-/* CPU services.
- *
- * CPUs represent devices that can execute software threads. A single
- * chip that contains multiple cores or strands is represented as
- * multiple CPUs with unique CPU identifiers. CPUs are exported to
- * OBP via the machine description (and to the OS via the OBP device
- * tree). CPUs are always in one of three states: stopped, running,
- * or error.
- *
- * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a
- * CPU within a logical domain. Operations that are to be performed
- * on multiple CPUs specify them via a CPU list. A CPU list is an
- * array in real memory, of which each 16-bit word is a CPU ID. CPU
- * lists are passed through the API as two arguments. The first is
- * the number of entries (16-bit words) in the CPU list, and the
- * second is the (real address) pointer to the CPU ID list.
- */
-
-/* cpu_start()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_START
- * ARG0: CPU ID
- * ARG1: PC
- * ARG2: RTBA
- * ARG3: target ARG0
- * RET0: status
- * ERRORS: ENOCPU Invalid CPU ID
- * EINVAL Target CPU ID is not in the stopped state
- * ENORADDR Invalid PC or RTBA real address
- * EBADALIGN Unaligned PC or unaligned RTBA
- * EWOULDBLOCK Starting resources are not available
- *
- * Start CPU with given CPU ID with PC in %pc and with a real trap
- * base address value of RTBA. The indicated CPU must be in the
- * stopped state. The supplied RTBA must be aligned on a 256 byte
- * boundary. On successful completion, the specified CPU will be in
- * the running state and will be supplied with "target ARG0" in %o0
- * and RTBA in %tba.
- */
-#define HV_FAST_CPU_START 0x10
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_start(unsigned long cpuid,
- unsigned long pc,
- unsigned long rtba,
- unsigned long arg0);
-#endif
-
-/* cpu_stop()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_STOP
- * ARG0: CPU ID
- * RET0: status
- * ERRORS: ENOCPU Invalid CPU ID
- * EINVAL Target CPU ID is the current cpu
- * EINVAL Target CPU ID is not in the running state
- * EWOULDBLOCK Stopping resources are not available
- * ENOTSUPPORTED Not supported on this platform
- *
- * The specified CPU is stopped. The indicated CPU must be in the
- * running state. On completion, it will be in the stopped state. It
- * is not legal to stop the current CPU.
- *
- * Note: As this service cannot be used to stop the current cpu, this service
- * may not be used to stop the last running CPU in a domain. To stop
- * and exit a running domain, a guest must use the mach_exit() service.
- */
-#define HV_FAST_CPU_STOP 0x11
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_stop(unsigned long cpuid);
-#endif
-
-/* cpu_yield()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_YIELD
- * RET0: status
- * ERRORS: No possible error.
- *
- * Suspend execution on the current CPU. Execution will resume when
- * an interrupt (device, %stick_compare, or cross-call) is targeted to
- * the CPU. On some CPUs, this API may be used by the hypervisor to
- * save power by disabling hardware strands.
- */
-#define HV_FAST_CPU_YIELD 0x12
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_yield(void);
-#endif
-
-/* cpu_qconf()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_QCONF
- * ARG0: queue
- * ARG1: base real address
- * ARG2: number of entries
- * RET0: status
- * ERRORS: ENORADDR Invalid base real address
- * EINVAL Invalid queue or number of entries is less
- * than 2 or too large.
- * EBADALIGN Base real address is not correctly aligned
- * for size.
- *
- * Configure the given queue to be placed at the given base real
- * address, with the given number of entries. The number of entries
- * must be a power of 2. The base real address must be aligned
- * exactly to match the queue size. Each queue entry is 64 bytes
- * long, so for example a 32 entry queue must be aligned on a 2048
- * byte real address boundary.
- *
- * The specified queue is unconfigured if the number of entries is given
- * as zero.
- *
- * For the current version of this API service, the argument queue is defined
- * as follows:
- *
- * queue description
- * ----- -------------------------
- * 0x3c cpu mondo queue
- * 0x3d device mondo queue
- * 0x3e resumable error queue
- * 0x3f non-resumable error queue
- *
- * Note: The maximum number of entries for each queue for a specific cpu may
- * be determined from the machine description.
- */
-#define HV_FAST_CPU_QCONF 0x14
-#define HV_CPU_QUEUE_CPU_MONDO 0x3c
-#define HV_CPU_QUEUE_DEVICE_MONDO 0x3d
-#define HV_CPU_QUEUE_RES_ERROR 0x3e
-#define HV_CPU_QUEUE_NONRES_ERROR 0x3f
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_qconf(unsigned long type,
- unsigned long queue_paddr,
- unsigned long num_queue_entries);
-#endif
-
-/* cpu_qinfo()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_QINFO
- * ARG0: queue
- * RET0: status
- * RET1: base real address
- * RET1: number of entries
- * ERRORS: EINVAL Invalid queue
- *
- * Return the configuration info for the given queue. The base real
- * address and number of entries of the defined queue are returned.
- * The queue argument values are the same as for cpu_qconf() above.
- *
- * If the specified queue is a valid queue number, but no queue has
- * been defined, the number of entries will be set to zero and the
- * base real address returned is undefined.
- */
-#define HV_FAST_CPU_QINFO 0x15
-
-/* cpu_mondo_send()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_MONDO_SEND
- * ARG0-1: CPU list
- * ARG2: data real address
- * RET0: status
- * ERRORS: EBADALIGN Mondo data is not 64-byte aligned or CPU list
- * is not 2-byte aligned.
- * ENORADDR Invalid data mondo address, or invalid cpu list
- * address.
- * ENOCPU Invalid cpu in CPU list
- * EWOULDBLOCK Some or all of the listed CPUs did not receive
- * the mondo
- * ECPUERROR One or more of the listed CPUs are in error
- * state, use HV_FAST_CPU_STATE to see which ones
- * EINVAL CPU list includes caller's CPU ID
- *
- * Send a mondo interrupt to the CPUs in the given CPU list with the
- * 64-bytes at the given data real address. The data must be 64-byte
- * aligned. The mondo data will be delivered to the cpu_mondo queues
- * of the recipient CPUs.
- *
- * In all cases, error or not, the CPUs in the CPU list to which the
- * mondo has been successfully delivered will be indicated by having
- * their entry in CPU list updated with the value 0xffff.
- */
-#define HV_FAST_CPU_MONDO_SEND 0x42
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa);
-#endif
-
-/* cpu_myid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_MYID
- * RET0: status
- * RET1: CPU ID
- * ERRORS: No errors defined.
- *
- * Return the hypervisor ID handle for the current CPU. Use by a
- * virtual CPU to discover it's own identity.
- */
-#define HV_FAST_CPU_MYID 0x16
-
-/* cpu_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_STATE
- * ARG0: CPU ID
- * RET0: status
- * RET1: state
- * ERRORS: ENOCPU Invalid CPU ID
- *
- * Retrieve the current state of the CPU with the given CPU ID.
- */
-#define HV_FAST_CPU_STATE 0x17
-#define HV_CPU_STATE_STOPPED 0x01
-#define HV_CPU_STATE_RUNNING 0x02
-#define HV_CPU_STATE_ERROR 0x03
-
-#ifndef __ASSEMBLY__
-extern long sun4v_cpu_state(unsigned long cpuid);
-#endif
-
-/* cpu_set_rtba()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_SET_RTBA
- * ARG0: RTBA
- * RET0: status
- * RET1: previous RTBA
- * ERRORS: ENORADDR Invalid RTBA real address
- * EBADALIGN RTBA is incorrectly aligned for a trap table
- *
- * Set the real trap base address of the local cpu to the given RTBA.
- * The supplied RTBA must be aligned on a 256 byte boundary. Upon
- * success the previous value of the RTBA is returned in RET1.
- *
- * Note: This service does not affect %tba
- */
-#define HV_FAST_CPU_SET_RTBA 0x18
-
-/* cpu_set_rtba()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_GET_RTBA
- * RET0: status
- * RET1: previous RTBA
- * ERRORS: No possible error.
- *
- * Returns the current value of RTBA in RET1.
- */
-#define HV_FAST_CPU_GET_RTBA 0x19
-
-/* MMU services.
- *
- * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls.
- */
-#ifndef __ASSEMBLY__
-struct hv_tsb_descr {
- unsigned short pgsz_idx;
- unsigned short assoc;
- unsigned int num_ttes; /* in TTEs */
- unsigned int ctx_idx;
- unsigned int pgsz_mask;
- unsigned long tsb_base;
- unsigned long resv;
-};
-#endif
-#define HV_TSB_DESCR_PGSZ_IDX_OFFSET 0x00
-#define HV_TSB_DESCR_ASSOC_OFFSET 0x02
-#define HV_TSB_DESCR_NUM_TTES_OFFSET 0x04
-#define HV_TSB_DESCR_CTX_IDX_OFFSET 0x08
-#define HV_TSB_DESCR_PGSZ_MASK_OFFSET 0x0c
-#define HV_TSB_DESCR_TSB_BASE_OFFSET 0x10
-#define HV_TSB_DESCR_RESV_OFFSET 0x18
-
-/* Page size bitmask. */
-#define HV_PGSZ_MASK_8K (1 << 0)
-#define HV_PGSZ_MASK_64K (1 << 1)
-#define HV_PGSZ_MASK_512K (1 << 2)
-#define HV_PGSZ_MASK_4MB (1 << 3)
-#define HV_PGSZ_MASK_32MB (1 << 4)
-#define HV_PGSZ_MASK_256MB (1 << 5)
-#define HV_PGSZ_MASK_2GB (1 << 6)
-#define HV_PGSZ_MASK_16GB (1 << 7)
-
-/* Page size index. The value given in the TSB descriptor must correspond
- * to the smallest page size specified in the pgsz_mask page size bitmask.
- */
-#define HV_PGSZ_IDX_8K 0
-#define HV_PGSZ_IDX_64K 1
-#define HV_PGSZ_IDX_512K 2
-#define HV_PGSZ_IDX_4MB 3
-#define HV_PGSZ_IDX_32MB 4
-#define HV_PGSZ_IDX_256MB 5
-#define HV_PGSZ_IDX_2GB 6
-#define HV_PGSZ_IDX_16GB 7
-
-/* MMU fault status area.
- *
- * MMU related faults have their status and fault address information
- * placed into a memory region made available by privileged code. Each
- * virtual processor must make a mmu_fault_area_conf() call to tell the
- * hypervisor where that processor's fault status should be stored.
- *
- * The fault status block is a multiple of 64-bytes and must be aligned
- * on a 64-byte boundary.
- */
-#ifndef __ASSEMBLY__
-struct hv_fault_status {
- unsigned long i_fault_type;
- unsigned long i_fault_addr;
- unsigned long i_fault_ctx;
- unsigned long i_reserved[5];
- unsigned long d_fault_type;
- unsigned long d_fault_addr;
- unsigned long d_fault_ctx;
- unsigned long d_reserved[5];
-};
-#endif
-#define HV_FAULT_I_TYPE_OFFSET 0x00
-#define HV_FAULT_I_ADDR_OFFSET 0x08
-#define HV_FAULT_I_CTX_OFFSET 0x10
-#define HV_FAULT_D_TYPE_OFFSET 0x40
-#define HV_FAULT_D_ADDR_OFFSET 0x48
-#define HV_FAULT_D_CTX_OFFSET 0x50
-
-#define HV_FAULT_TYPE_FAST_MISS 1
-#define HV_FAULT_TYPE_FAST_PROT 2
-#define HV_FAULT_TYPE_MMU_MISS 3
-#define HV_FAULT_TYPE_INV_RA 4
-#define HV_FAULT_TYPE_PRIV_VIOL 5
-#define HV_FAULT_TYPE_PROT_VIOL 6
-#define HV_FAULT_TYPE_NFO 7
-#define HV_FAULT_TYPE_NFO_SEFF 8
-#define HV_FAULT_TYPE_INV_VA 9
-#define HV_FAULT_TYPE_INV_ASI 10
-#define HV_FAULT_TYPE_NC_ATOMIC 11
-#define HV_FAULT_TYPE_PRIV_ACT 12
-#define HV_FAULT_TYPE_RESV1 13
-#define HV_FAULT_TYPE_UNALIGNED 14
-#define HV_FAULT_TYPE_INV_PGSZ 15
-/* Values 16 --> -2 are reserved. */
-#define HV_FAULT_TYPE_MULTIPLE -1
-
-/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(),
- * and mmu_{map,unmap}_perm_addr().
- */
-#define HV_MMU_DMMU 0x01
-#define HV_MMU_IMMU 0x02
-#define HV_MMU_ALL (HV_MMU_DMMU | HV_MMU_IMMU)
-
-/* mmu_map_addr()
- * TRAP: HV_MMU_MAP_ADDR_TRAP
- * ARG0: virtual address
- * ARG1: mmu context
- * ARG2: TTE
- * ARG3: flags (HV_MMU_{IMMU,DMMU})
- * ERRORS: EINVAL Invalid virtual address, mmu context, or flags
- * EBADPGSZ Invalid page size value
- * ENORADDR Invalid real address in TTE
- *
- * Create a non-permanent mapping using the given TTE, virtual
- * address, and mmu context. The flags argument determines which
- * (data, or instruction, or both) TLB the mapping gets loaded into.
- *
- * The behavior is undefined if the valid bit is clear in the TTE.
- *
- * Note: This API call is for privileged code to specify temporary translation
- * mappings without the need to create and manage a TSB.
- */
-
-/* mmu_unmap_addr()
- * TRAP: HV_MMU_UNMAP_ADDR_TRAP
- * ARG0: virtual address
- * ARG1: mmu context
- * ARG2: flags (HV_MMU_{IMMU,DMMU})
- * ERRORS: EINVAL Invalid virtual address, mmu context, or flags
- *
- * Demaps the given virtual address in the given mmu context on this
- * CPU. This function is intended to be used to demap pages mapped
- * with mmu_map_addr. This service is equivalent to invoking
- * mmu_demap_page() with only the current CPU in the CPU list. The
- * flags argument determines which (data, or instruction, or both) TLB
- * the mapping gets unmapped from.
- *
- * Attempting to perform an unmap operation for a previously defined
- * permanent mapping will have undefined results.
- */
-
-/* mmu_tsb_ctx0()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_TSB_CTX0
- * ARG0: number of TSB descriptions
- * ARG1: TSB descriptions pointer
- * RET0: status
- * ERRORS: ENORADDR Invalid TSB descriptions pointer or
- * TSB base within a descriptor
- * EBADALIGN TSB descriptions pointer is not aligned
- * to an 8-byte boundary, or TSB base
- * within a descriptor is not aligned for
- * the given TSB size
- * EBADPGSZ Invalid page size in a TSB descriptor
- * EBADTSB Invalid associativity or size in a TSB
- * descriptor
- * EINVAL Invalid number of TSB descriptions, or
- * invalid context index in a TSB
- * descriptor, or index page size not
- * equal to smallest page size in page
- * size bitmask field.
- *
- * Configures the TSBs for the current CPU for virtual addresses with
- * context zero. The TSB descriptions pointer is a pointer to an
- * array of the given number of TSB descriptions.
- *
- * Note: The maximum number of TSBs available to a virtual CPU is given by the
- * mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the
- * machine description.
- */
-#define HV_FAST_MMU_TSB_CTX0 0x20
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions,
- unsigned long tsb_desc_ra);
-#endif
-
-/* mmu_tsb_ctxnon0()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_TSB_CTXNON0
- * ARG0: number of TSB descriptions
- * ARG1: TSB descriptions pointer
- * RET0: status
- * ERRORS: Same as for mmu_tsb_ctx0() above.
- *
- * Configures the TSBs for the current CPU for virtual addresses with
- * non-zero contexts. The TSB descriptions pointer is a pointer to an
- * array of the given number of TSB descriptions.
- *
- * Note: A maximum of 16 TSBs may be specified in the TSB description list.
- */
-#define HV_FAST_MMU_TSB_CTXNON0 0x21
-
-/* mmu_demap_page()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_DEMAP_PAGE
- * ARG0: reserved, must be zero
- * ARG1: reserved, must be zero
- * ARG2: virtual address
- * ARG3: mmu context
- * ARG4: flags (HV_MMU_{IMMU,DMMU})
- * RET0: status
- * ERRORS: EINVAL Invalid virutal address, context, or
- * flags value
- * ENOTSUPPORTED ARG0 or ARG1 is non-zero
- *
- * Demaps any page mapping of the given virtual address in the given
- * mmu context for the current virtual CPU. Any virtually tagged
- * caches are guaranteed to be kept consistent. The flags argument
- * determines which TLB (instruction, or data, or both) participate in
- * the operation.
- *
- * ARG0 and ARG1 are both reserved and must be set to zero.
- */
-#define HV_FAST_MMU_DEMAP_PAGE 0x22
-
-/* mmu_demap_ctx()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_DEMAP_CTX
- * ARG0: reserved, must be zero
- * ARG1: reserved, must be zero
- * ARG2: mmu context
- * ARG3: flags (HV_MMU_{IMMU,DMMU})
- * RET0: status
- * ERRORS: EINVAL Invalid context or flags value
- * ENOTSUPPORTED ARG0 or ARG1 is non-zero
- *
- * Demaps all non-permanent virtual page mappings previously specified
- * for the given context for the current virtual CPU. Any virtual
- * tagged caches are guaranteed to be kept consistent. The flags
- * argument determines which TLB (instruction, or data, or both)
- * participate in the operation.
- *
- * ARG0 and ARG1 are both reserved and must be set to zero.
- */
-#define HV_FAST_MMU_DEMAP_CTX 0x23
-
-/* mmu_demap_all()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_DEMAP_ALL
- * ARG0: reserved, must be zero
- * ARG1: reserved, must be zero
- * ARG2: flags (HV_MMU_{IMMU,DMMU})
- * RET0: status
- * ERRORS: EINVAL Invalid flags value
- * ENOTSUPPORTED ARG0 or ARG1 is non-zero
- *
- * Demaps all non-permanent virtual page mappings previously specified
- * for the current virtual CPU. Any virtual tagged caches are
- * guaranteed to be kept consistent. The flags argument determines
- * which TLB (instruction, or data, or both) participate in the
- * operation.
- *
- * ARG0 and ARG1 are both reserved and must be set to zero.
- */
-#define HV_FAST_MMU_DEMAP_ALL 0x24
-
-#ifndef __ASSEMBLY__
-extern void sun4v_mmu_demap_all(void);
-#endif
-
-/* mmu_map_perm_addr()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR
- * ARG0: virtual address
- * ARG1: reserved, must be zero
- * ARG2: TTE
- * ARG3: flags (HV_MMU_{IMMU,DMMU})
- * RET0: status
- * ERRORS: EINVAL Invalid virutal address or flags value
- * EBADPGSZ Invalid page size value
- * ENORADDR Invalid real address in TTE
- * ETOOMANY Too many mappings (max of 8 reached)
- *
- * Create a permanent mapping using the given TTE and virtual address
- * for context 0 on the calling virtual CPU. A maximum of 8 such
- * permanent mappings may be specified by privileged code. Mappings
- * may be removed with mmu_unmap_perm_addr().
- *
- * The behavior is undefined if a TTE with the valid bit clear is given.
- *
- * Note: This call is used to specify address space mappings for which
- * privileged code does not expect to receive misses. For example,
- * this mechanism can be used to map kernel nucleus code and data.
- */
-#define HV_FAST_MMU_MAP_PERM_ADDR 0x25
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr,
- unsigned long set_to_zero,
- unsigned long tte,
- unsigned long flags);
-#endif
-
-/* mmu_fault_area_conf()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF
- * ARG0: real address
- * RET0: status
- * RET1: previous mmu fault area real address
- * ERRORS: ENORADDR Invalid real address
- * EBADALIGN Invalid alignment for fault area
- *
- * Configure the MMU fault status area for the calling CPU. A 64-byte
- * aligned real address specifies where MMU fault status information
- * is placed. The return value is the previously specified area, or 0
- * for the first invocation. Specifying a fault area at real address
- * 0 is not allowed.
- */
-#define HV_FAST_MMU_FAULT_AREA_CONF 0x26
-
-/* mmu_enable()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_ENABLE
- * ARG0: enable flag
- * ARG1: return target address
- * RET0: status
- * ERRORS: ENORADDR Invalid real address when disabling
- * translation.
- * EBADALIGN The return target address is not
- * aligned to an instruction.
- * EINVAL The enable flag request the current
- * operating mode (e.g. disable if already
- * disabled)
- *
- * Enable or disable virtual address translation for the calling CPU
- * within the virtual machine domain. If the enable flag is zero,
- * translation is disabled, any non-zero value will enable
- * translation.
- *
- * When this function returns, the newly selected translation mode
- * will be active. If the mmu is being enabled, then the return
- * target address is a virtual address else it is a real address.
- *
- * Upon successful completion, control will be returned to the given
- * return target address (ie. the cpu will jump to that address). On
- * failure, the previous mmu mode remains and the trap simply returns
- * as normal with the appropriate error code in RET0.
- */
-#define HV_FAST_MMU_ENABLE 0x27
-
-/* mmu_unmap_perm_addr()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_UNMAP_PERM_ADDR
- * ARG0: virtual address
- * ARG1: reserved, must be zero
- * ARG2: flags (HV_MMU_{IMMU,DMMU})
- * RET0: status
- * ERRORS: EINVAL Invalid virutal address or flags value
- * ENOMAP Specified mapping was not found
- *
- * Demaps any permanent page mapping (established via
- * mmu_map_perm_addr()) at the given virtual address for context 0 on
- * the current virtual CPU. Any virtual tagged caches are guaranteed
- * to be kept consistent.
- */
-#define HV_FAST_MMU_UNMAP_PERM_ADDR 0x28
-
-/* mmu_tsb_ctx0_info()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_TSB_CTX0_INFO
- * ARG0: max TSBs
- * ARG1: buffer pointer
- * RET0: status
- * RET1: number of TSBs
- * ERRORS: EINVAL Supplied buffer is too small
- * EBADALIGN The buffer pointer is badly aligned
- * ENORADDR Invalid real address for buffer pointer
- *
- * Return the TSB configuration as previous defined by mmu_tsb_ctx0()
- * into the provided buffer. The size of the buffer is given in ARG1
- * in terms of the number of TSB description entries.
- *
- * Upon return, RET1 always contains the number of TSB descriptions
- * previously configured. If zero TSBs were configured, EOK is
- * returned with RET1 containing 0.
- */
-#define HV_FAST_MMU_TSB_CTX0_INFO 0x29
-
-/* mmu_tsb_ctxnon0_info()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_TSB_CTXNON0_INFO
- * ARG0: max TSBs
- * ARG1: buffer pointer
- * RET0: status
- * RET1: number of TSBs
- * ERRORS: EINVAL Supplied buffer is too small
- * EBADALIGN The buffer pointer is badly aligned
- * ENORADDR Invalid real address for buffer pointer
- *
- * Return the TSB configuration as previous defined by
- * mmu_tsb_ctxnon0() into the provided buffer. The size of the buffer
- * is given in ARG1 in terms of the number of TSB description entries.
- *
- * Upon return, RET1 always contains the number of TSB descriptions
- * previously configured. If zero TSBs were configured, EOK is
- * returned with RET1 containing 0.
- */
-#define HV_FAST_MMU_TSB_CTXNON0_INFO 0x2a
-
-/* mmu_fault_area_info()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_FAULT_AREA_INFO
- * RET0: status
- * RET1: fault area real address
- * ERRORS: No errors defined.
- *
- * Return the currently defined MMU fault status area for the current
- * CPU. The real address of the fault status area is returned in
- * RET1, or 0 is returned in RET1 if no fault status area is defined.
- *
- * Note: mmu_fault_area_conf() may be called with the return value (RET1)
- * from this service if there is a need to save and restore the fault
- * area for a cpu.
- */
-#define HV_FAST_MMU_FAULT_AREA_INFO 0x2b
-
-/* Cache and Memory services. */
-
-/* mem_scrub()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MEM_SCRUB
- * ARG0: real address
- * ARG1: length
- * RET0: status
- * RET1: length scrubbed
- * ERRORS: ENORADDR Invalid real address
- * EBADALIGN Start address or length are not correctly
- * aligned
- * EINVAL Length is zero
- *
- * Zero the memory contents in the range real address to real address
- * plus length minus 1. Also, valid ECC will be generated for that
- * memory address range. Scrubbing is started at the given real
- * address, but may not scrub the entire given length. The actual
- * length scrubbed will be returned in RET1.
- *
- * The real address and length must be aligned on an 8K boundary, or
- * contain the start address and length from a sun4v error report.
- *
- * Note: There are two uses for this function. The first use is to block clear
- * and initialize memory and the second is to scrub an u ncorrectable
- * error reported via a resumable or non-resumable trap. The second
- * use requires the arguments to be equal to the real address and length
- * provided in a sun4v memory error report.
- */
-#define HV_FAST_MEM_SCRUB 0x31
-
-/* mem_sync()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MEM_SYNC
- * ARG0: real address
- * ARG1: length
- * RET0: status
- * RET1: length synced
- * ERRORS: ENORADDR Invalid real address
- * EBADALIGN Start address or length are not correctly
- * aligned
- * EINVAL Length is zero
- *
- * Force the next access within the real address to real address plus
- * length minus 1 to be fetches from main system memory. Less than
- * the given length may be synced, the actual amount synced is
- * returned in RET1. The real address and length must be aligned on
- * an 8K boundary.
- */
-#define HV_FAST_MEM_SYNC 0x32
-
-/* Time of day services.
- *
- * The hypervisor maintains the time of day on a per-domain basis.
- * Changing the time of day in one domain does not affect the time of
- * day on any other domain.
- *
- * Time is described by a single unsigned 64-bit word which is the
- * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1,
- * 1970).
- */
-
-/* tod_get()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_TOD_GET
- * RET0: status
- * RET1: TOD
- * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable
- * ENOTSUPPORTED If TOD not supported on this platform
- *
- * Return the current time of day. May block if TOD access is
- * temporarily not possible.
- */
-#define HV_FAST_TOD_GET 0x50
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_tod_get(unsigned long *time);
-#endif
-
-/* tod_set()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_TOD_SET
- * ARG0: TOD
- * RET0: status
- * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable
- * ENOTSUPPORTED If TOD not supported on this platform
- *
- * The current time of day is set to the value specified in ARG0. May
- * block if TOD access is temporarily not possible.
- */
-#define HV_FAST_TOD_SET 0x51
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_tod_set(unsigned long time);
-#endif
-
-/* Console services */
-
-/* con_getchar()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CONS_GETCHAR
- * RET0: status
- * RET1: character
- * ERRORS: EWOULDBLOCK No character available.
- *
- * Returns a character from the console device. If no character is
- * available then an EWOULDBLOCK error is returned. If a character is
- * available, then the returned status is EOK and the character value
- * is in RET1.
- *
- * A virtual BREAK is represented by the 64-bit value -1.
- *
- * A virtual HUP signal is represented by the 64-bit value -2.
- */
-#define HV_FAST_CONS_GETCHAR 0x60
-
-/* con_putchar()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CONS_PUTCHAR
- * ARG0: character
- * RET0: status
- * ERRORS: EINVAL Illegal character
- * EWOULDBLOCK Output buffer currently full, would block
- *
- * Send a character to the console device. Only character values
- * between 0 and 255 may be used. Values outside this range are
- * invalid except for the 64-bit value -1 which is used to send a
- * virtual BREAK.
- */
-#define HV_FAST_CONS_PUTCHAR 0x61
-
-/* con_read()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CONS_READ
- * ARG0: buffer real address
- * ARG1: buffer size in bytes
- * RET0: status
- * RET1: bytes read or BREAK or HUP
- * ERRORS: EWOULDBLOCK No character available.
- *
- * Reads characters into a buffer from the console device. If no
- * character is available then an EWOULDBLOCK error is returned.
- * If a character is available, then the returned status is EOK
- * and the number of bytes read into the given buffer is provided
- * in RET1.
- *
- * A virtual BREAK is represented by the 64-bit RET1 value -1.
- *
- * A virtual HUP signal is represented by the 64-bit RET1 value -2.
- *
- * If BREAK or HUP are indicated, no bytes were read into buffer.
- */
-#define HV_FAST_CONS_READ 0x62
-
-/* con_write()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CONS_WRITE
- * ARG0: buffer real address
- * ARG1: buffer size in bytes
- * RET0: status
- * RET1: bytes written
- * ERRORS: EWOULDBLOCK Output buffer currently full, would block
- *
- * Send a characters in buffer to the console device. Breaks must be
- * sent using con_putchar().
- */
-#define HV_FAST_CONS_WRITE 0x63
-
-#ifndef __ASSEMBLY__
-extern long sun4v_con_getchar(long *status);
-extern long sun4v_con_putchar(long c);
-extern long sun4v_con_read(unsigned long buffer,
- unsigned long size,
- unsigned long *bytes_read);
-extern unsigned long sun4v_con_write(unsigned long buffer,
- unsigned long size,
- unsigned long *bytes_written);
-#endif
-
-/* mach_set_soft_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE
- * ARG0: software state
- * ARG1: software state description pointer
- * RET0: status
- * ERRORS: EINVAL software state not valid or software state
- * description is not NULL terminated
- * ENORADDR software state description pointer is not a
- * valid real address
- * EBADALIGNED software state description is not correctly
- * aligned
- *
- * This allows the guest to report it's soft state to the hypervisor. There
- * are two primary components to this state. The first part states whether
- * the guest software is running or not. The second containts optional
- * details specific to the software.
- *
- * The software state argument is defined below in HV_SOFT_STATE_*, and
- * indicates whether the guest is operating normally or in a transitional
- * state.
- *
- * The software state description argument is a real address of a data buffer
- * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL
- * terminated 7-bit ASCII string of up to 31 characters not including the
- * NULL termination.
- */
-#define HV_FAST_MACH_SET_SOFT_STATE 0x70
-#define HV_SOFT_STATE_NORMAL 0x01
-#define HV_SOFT_STATE_TRANSITION 0x02
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state,
- unsigned long msg_string_ra);
-#endif
-
-/* mach_get_soft_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE
- * ARG0: software state description pointer
- * RET0: status
- * RET1: software state
- * ERRORS: ENORADDR software state description pointer is not a
- * valid real address
- * EBADALIGNED software state description is not correctly
- * aligned
- *
- * Retrieve the current value of the guest's software state. The rules
- * for the software state pointer are the same as for mach_set_soft_state()
- * above.
- */
-#define HV_FAST_MACH_GET_SOFT_STATE 0x71
-
-/* svc_send()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_SVC_SEND
- * ARG0: service ID
- * ARG1: buffer real address
- * ARG2: buffer size
- * RET0: STATUS
- * RET1: sent_bytes
- *
- * Be careful, all output registers are clobbered by this operation,
- * so for example it is not possible to save away a value in %o4
- * across the trap.
- */
-#define HV_FAST_SVC_SEND 0x80
-
-/* svc_recv()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_SVC_RECV
- * ARG0: service ID
- * ARG1: buffer real address
- * ARG2: buffer size
- * RET0: STATUS
- * RET1: recv_bytes
- *
- * Be careful, all output registers are clobbered by this operation,
- * so for example it is not possible to save away a value in %o4
- * across the trap.
- */
-#define HV_FAST_SVC_RECV 0x81
-
-/* svc_getstatus()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_SVC_GETSTATUS
- * ARG0: service ID
- * RET0: STATUS
- * RET1: status bits
- */
-#define HV_FAST_SVC_GETSTATUS 0x82
-
-/* svc_setstatus()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_SVC_SETSTATUS
- * ARG0: service ID
- * ARG1: bits to set
- * RET0: STATUS
- */
-#define HV_FAST_SVC_SETSTATUS 0x83
-
-/* svc_clrstatus()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_SVC_CLRSTATUS
- * ARG0: service ID
- * ARG1: bits to clear
- * RET0: STATUS
- */
-#define HV_FAST_SVC_CLRSTATUS 0x84
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_svc_send(unsigned long svc_id,
- unsigned long buffer,
- unsigned long buffer_size,
- unsigned long *sent_bytes);
-extern unsigned long sun4v_svc_recv(unsigned long svc_id,
- unsigned long buffer,
- unsigned long buffer_size,
- unsigned long *recv_bytes);
-extern unsigned long sun4v_svc_getstatus(unsigned long svc_id,
- unsigned long *status_bits);
-extern unsigned long sun4v_svc_setstatus(unsigned long svc_id,
- unsigned long status_bits);
-extern unsigned long sun4v_svc_clrstatus(unsigned long svc_id,
- unsigned long status_bits);
-#endif
-
-/* Trap trace services.
- *
- * The hypervisor provides a trap tracing capability for privileged
- * code running on each virtual CPU. Privileged code provides a
- * round-robin trap trace queue within which the hypervisor writes
- * 64-byte entries detailing hyperprivileged traps taken n behalf of
- * privileged code. This is provided as a debugging capability for
- * privileged code.
- *
- * The trap trace control structure is 64-bytes long and placed at the
- * start (offset 0) of the trap trace buffer, and is described as
- * follows:
- */
-#ifndef __ASSEMBLY__
-struct hv_trap_trace_control {
- unsigned long head_offset;
- unsigned long tail_offset;
- unsigned long __reserved[0x30 / sizeof(unsigned long)];
-};
-#endif
-#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET 0x00
-#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET 0x08
-
-/* The head offset is the offset of the most recently completed entry
- * in the trap-trace buffer. The tail offset is the offset of the
- * next entry to be written. The control structure is owned and
- * modified by the hypervisor. A guest may not modify the control
- * structure contents. Attempts to do so will result in undefined
- * behavior for the guest.
- *
- * Each trap trace buffer entry is layed out as follows:
- */
-#ifndef __ASSEMBLY__
-struct hv_trap_trace_entry {
- unsigned char type; /* Hypervisor or guest entry? */
- unsigned char hpstate; /* Hyper-privileged state */
- unsigned char tl; /* Trap level */
- unsigned char gl; /* Global register level */
- unsigned short tt; /* Trap type */
- unsigned short tag; /* Extended trap identifier */
- unsigned long tstate; /* Trap state */
- unsigned long tick; /* Tick */
- unsigned long tpc; /* Trap PC */
- unsigned long f1; /* Entry specific */
- unsigned long f2; /* Entry specific */
- unsigned long f3; /* Entry specific */
- unsigned long f4; /* Entry specific */
-};
-#endif
-#define HV_TRAP_TRACE_ENTRY_TYPE 0x00
-#define HV_TRAP_TRACE_ENTRY_HPSTATE 0x01
-#define HV_TRAP_TRACE_ENTRY_TL 0x02
-#define HV_TRAP_TRACE_ENTRY_GL 0x03
-#define HV_TRAP_TRACE_ENTRY_TT 0x04
-#define HV_TRAP_TRACE_ENTRY_TAG 0x06
-#define HV_TRAP_TRACE_ENTRY_TSTATE 0x08
-#define HV_TRAP_TRACE_ENTRY_TICK 0x10
-#define HV_TRAP_TRACE_ENTRY_TPC 0x18
-#define HV_TRAP_TRACE_ENTRY_F1 0x20
-#define HV_TRAP_TRACE_ENTRY_F2 0x28
-#define HV_TRAP_TRACE_ENTRY_F3 0x30
-#define HV_TRAP_TRACE_ENTRY_F4 0x38
-
-/* The type field is encoded as follows. */
-#define HV_TRAP_TYPE_UNDEF 0x00 /* Entry content undefined */
-#define HV_TRAP_TYPE_HV 0x01 /* Hypervisor trap entry */
-#define HV_TRAP_TYPE_GUEST 0xff /* Added via ttrace_addentry() */
-
-/* ttrace_buf_conf()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_TTRACE_BUF_CONF
- * ARG0: real address
- * ARG1: number of entries
- * RET0: status
- * RET1: number of entries
- * ERRORS: ENORADDR Invalid real address
- * EINVAL Size is too small
- * EBADALIGN Real address not aligned on 64-byte boundary
- *
- * Requests hypervisor trap tracing and declares a virtual CPU's trap
- * trace buffer to the hypervisor. The real address supplies the real
- * base address of the trap trace queue and must be 64-byte aligned.
- * Specifying a value of 0 for the number of entries disables trap
- * tracing for the calling virtual CPU. The buffer allocated must be
- * sized for a power of two number of 64-byte trap trace entries plus
- * an initial 64-byte control structure.
- *
- * This may be invoked any number of times so that a virtual CPU may
- * relocate a trap trace buffer or create "snapshots" of information.
- *
- * If the real address is illegal or badly aligned, then trap tracing
- * is disabled and an error is returned.
- *
- * Upon failure with EINVAL, this service call returns in RET1 the
- * minimum number of buffer entries required. Upon other failures
- * RET1 is undefined.
- */
-#define HV_FAST_TTRACE_BUF_CONF 0x90
-
-/* ttrace_buf_info()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_TTRACE_BUF_INFO
- * RET0: status
- * RET1: real address
- * RET2: size
- * ERRORS: None defined.
- *
- * Returns the size and location of the previously declared trap-trace
- * buffer. In the event that no buffer was previously defined, or the
- * buffer is disabled, this call will return a size of zero bytes.
- */
-#define HV_FAST_TTRACE_BUF_INFO 0x91
-
-/* ttrace_enable()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_TTRACE_ENABLE
- * ARG0: enable
- * RET0: status
- * RET1: previous enable state
- * ERRORS: EINVAL No trap trace buffer currently defined
- *
- * Enable or disable trap tracing, and return the previous enabled
- * state in RET1. Future systems may define various flags for the
- * enable argument (ARG0), for the moment a guest should pass
- * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all
- * tracing - which will ensure future compatability.
- */
-#define HV_FAST_TTRACE_ENABLE 0x92
-
-/* ttrace_freeze()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_TTRACE_FREEZE
- * ARG0: freeze
- * RET0: status
- * RET1: previous freeze state
- * ERRORS: EINVAL No trap trace buffer currently defined
- *
- * Freeze or unfreeze trap tracing, returning the previous freeze
- * state in RET1. A guest should pass a non-zero value to freeze and
- * a zero value to unfreeze all tracing. The returned previous state
- * is 0 for not frozen and 1 for frozen.
- */
-#define HV_FAST_TTRACE_FREEZE 0x93
-
-/* ttrace_addentry()
- * TRAP: HV_TTRACE_ADDENTRY_TRAP
- * ARG0: tag (16-bits)
- * ARG1: data word 0
- * ARG2: data word 1
- * ARG3: data word 2
- * ARG4: data word 3
- * RET0: status
- * ERRORS: EINVAL No trap trace buffer currently defined
- *
- * Add an entry to the trap trace buffer. Upon return only ARG0/RET0
- * is modified - none of the other registers holding arguments are
- * volatile across this hypervisor service.
- */
-
-/* Core dump services.
- *
- * Since the hypervisor viraulizes and thus obscures a lot of the
- * physical machine layout and state, traditional OS crash dumps can
- * be difficult to diagnose especially when the problem is a
- * configuration error of some sort.
- *
- * The dump services provide an opaque buffer into which the
- * hypervisor can place it's internal state in order to assist in
- * debugging such situations. The contents are opaque and extremely
- * platform and hypervisor implementation specific. The guest, during
- * a core dump, requests that the hypervisor update any information in
- * the dump buffer in preparation to being dumped as part of the
- * domain's memory image.
- */
-
-/* dump_buf_update()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_DUMP_BUF_UPDATE
- * ARG0: real address
- * ARG1: size
- * RET0: status
- * RET1: required size of dump buffer
- * ERRORS: ENORADDR Invalid real address
- * EBADALIGN Real address is not aligned on a 64-byte
- * boundary
- * EINVAL Size is non-zero but less than minimum size
- * required
- * ENOTSUPPORTED Operation not supported on current logical
- * domain
- *
- * Declare a domain dump buffer to the hypervisor. The real address
- * provided for the domain dump buffer must be 64-byte aligned. The
- * size specifies the size of the dump buffer and may be larger than
- * the minimum size specified in the machine description. The
- * hypervisor will fill the dump buffer with opaque data.
- *
- * Note: A guest may elect to include dump buffer contents as part of a crash
- * dump to assist with debugging. This function may be called any number
- * of times so that a guest may relocate a dump buffer, or create
- * "snapshots" of any dump-buffer information. Each call to
- * dump_buf_update() atomically declares the new dump buffer to the
- * hypervisor.
- *
- * A specified size of 0 unconfigures the dump buffer. If the real
- * address is illegal or badly aligned, then any currently active dump
- * buffer is disabled and an error is returned.
- *
- * In the event that the call fails with EINVAL, RET1 contains the
- * minimum size requires by the hypervisor for a valid dump buffer.
- */
-#define HV_FAST_DUMP_BUF_UPDATE 0x94
-
-/* dump_buf_info()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_DUMP_BUF_INFO
- * RET0: status
- * RET1: real address of current dump buffer
- * RET2: size of current dump buffer
- * ERRORS: No errors defined.
- *
- * Return the currently configures dump buffer description. A
- * returned size of 0 bytes indicates an undefined dump buffer. In
- * this case the return address in RET1 is undefined.
- */
-#define HV_FAST_DUMP_BUF_INFO 0x95
-
-/* Device interrupt services.
- *
- * Device interrupts are allocated to system bus bridges by the hypervisor,
- * and described to OBP in the machine description. OBP then describes
- * these interrupts to the OS via properties in the device tree.
- *
- * Terminology:
- *
- * cpuid Unique opaque value which represents a target cpu.
- *
- * devhandle Device handle. It uniquely identifies a device, and
- * consistes of the lower 28-bits of the hi-cell of the
- * first entry of the device's "reg" property in the
- * OBP device tree.
- *
- * devino Device interrupt number. Specifies the relative
- * interrupt number within the device. The unique
- * combination of devhandle and devino are used to
- * identify a specific device interrupt.
- *
- * Note: The devino value is the same as the values in the
- * "interrupts" property or "interrupt-map" property
- * in the OBP device tree for that device.
- *
- * sysino System interrupt number. A 64-bit unsigned interger
- * representing a unique interrupt within a virtual
- * machine.
- *
- * intr_state A flag representing the interrupt state for a given
- * sysino. The state values are defined below.
- *
- * intr_enabled A flag representing the 'enabled' state for a given
- * sysino. The enable values are defined below.
- */
-
-#define HV_INTR_STATE_IDLE 0 /* Nothing pending */
-#define HV_INTR_STATE_RECEIVED 1 /* Interrupt received by hardware */
-#define HV_INTR_STATE_DELIVERED 2 /* Interrupt delivered to queue */
-
-#define HV_INTR_DISABLED 0 /* sysino not enabled */
-#define HV_INTR_ENABLED 1 /* sysino enabled */
-
-/* intr_devino_to_sysino()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_INTR_DEVINO2SYSINO
- * ARG0: devhandle
- * ARG1: devino
- * RET0: status
- * RET1: sysino
- * ERRORS: EINVAL Invalid devhandle/devino
- *
- * Converts a device specific interrupt number of the given
- * devhandle/devino into a system specific ino (sysino).
- */
-#define HV_FAST_INTR_DEVINO2SYSINO 0xa0
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle,
- unsigned long devino);
-#endif
-
-/* intr_getenabled()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_INTR_GETENABLED
- * ARG0: sysino
- * RET0: status
- * RET1: intr_enabled (HV_INTR_{DISABLED,ENABLED})
- * ERRORS: EINVAL Invalid sysino
- *
- * Returns interrupt enabled state in RET1 for the interrupt defined
- * by the given sysino.
- */
-#define HV_FAST_INTR_GETENABLED 0xa1
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_getenabled(unsigned long sysino);
-#endif
-
-/* intr_setenabled()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_INTR_SETENABLED
- * ARG0: sysino
- * ARG1: intr_enabled (HV_INTR_{DISABLED,ENABLED})
- * RET0: status
- * ERRORS: EINVAL Invalid sysino or intr_enabled value
- *
- * Set the 'enabled' state of the interrupt sysino.
- */
-#define HV_FAST_INTR_SETENABLED 0xa2
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled);
-#endif
-
-/* intr_getstate()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_INTR_GETSTATE
- * ARG0: sysino
- * RET0: status
- * RET1: intr_state (HV_INTR_STATE_*)
- * ERRORS: EINVAL Invalid sysino
- *
- * Returns current state of the interrupt defined by the given sysino.
- */
-#define HV_FAST_INTR_GETSTATE 0xa3
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_getstate(unsigned long sysino);
-#endif
-
-/* intr_setstate()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_INTR_SETSTATE
- * ARG0: sysino
- * ARG1: intr_state (HV_INTR_STATE_*)
- * RET0: status
- * ERRORS: EINVAL Invalid sysino or intr_state value
- *
- * Sets the current state of the interrupt described by the given sysino
- * value.
- *
- * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending
- * interrupt for sysino.
- */
-#define HV_FAST_INTR_SETSTATE 0xa4
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state);
-#endif
-
-/* intr_gettarget()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_INTR_GETTARGET
- * ARG0: sysino
- * RET0: status
- * RET1: cpuid
- * ERRORS: EINVAL Invalid sysino
- *
- * Returns CPU that is the current target of the interrupt defined by
- * the given sysino. The CPU value returned is undefined if the target
- * has not been set via intr_settarget().
- */
-#define HV_FAST_INTR_GETTARGET 0xa5
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_gettarget(unsigned long sysino);
-#endif
-
-/* intr_settarget()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_INTR_SETTARGET
- * ARG0: sysino
- * ARG1: cpuid
- * RET0: status
- * ERRORS: EINVAL Invalid sysino
- * ENOCPU Invalid cpuid
- *
- * Set the target CPU for the interrupt defined by the given sysino.
- */
-#define HV_FAST_INTR_SETTARGET 0xa6
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid);
-#endif
-
-/* vintr_get_cookie()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_GET_COOKIE
- * ARG0: device handle
- * ARG1: device ino
- * RET0: status
- * RET1: cookie
- */
-#define HV_FAST_VINTR_GET_COOKIE 0xa7
-
-/* vintr_set_cookie()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_SET_COOKIE
- * ARG0: device handle
- * ARG1: device ino
- * ARG2: cookie
- * RET0: status
- */
-#define HV_FAST_VINTR_SET_COOKIE 0xa8
-
-/* vintr_get_valid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_GET_VALID
- * ARG0: device handle
- * ARG1: device ino
- * RET0: status
- * RET1: valid state
- */
-#define HV_FAST_VINTR_GET_VALID 0xa9
-
-/* vintr_set_valid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_SET_VALID
- * ARG0: device handle
- * ARG1: device ino
- * ARG2: valid state
- * RET0: status
- */
-#define HV_FAST_VINTR_SET_VALID 0xaa
-
-/* vintr_get_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_GET_STATE
- * ARG0: device handle
- * ARG1: device ino
- * RET0: status
- * RET1: state
- */
-#define HV_FAST_VINTR_GET_STATE 0xab
-
-/* vintr_set_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_SET_STATE
- * ARG0: device handle
- * ARG1: device ino
- * ARG2: state
- * RET0: status
- */
-#define HV_FAST_VINTR_SET_STATE 0xac
-
-/* vintr_get_target()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_GET_TARGET
- * ARG0: device handle
- * ARG1: device ino
- * RET0: status
- * RET1: cpuid
- */
-#define HV_FAST_VINTR_GET_TARGET 0xad
-
-/* vintr_set_target()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_SET_TARGET
- * ARG0: device handle
- * ARG1: device ino
- * ARG2: cpuid
- * RET0: status
- */
-#define HV_FAST_VINTR_SET_TARGET 0xae
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long *cookie);
-extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long cookie);
-extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long *valid);
-extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long valid);
-extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long *state);
-extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long state);
-extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long *cpuid);
-extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long cpuid);
-#endif
-
-/* PCI IO services.
- *
- * See the terminology descriptions in the device interrupt services
- * section above as those apply here too. Here are terminology
- * definitions specific to these PCI IO services:
- *
- * tsbnum TSB number. Indentifies which io-tsb is used.
- * For this version of the specification, tsbnum
- * must be zero.
- *
- * tsbindex TSB index. Identifies which entry in the TSB
- * is used. The first entry is zero.
- *
- * tsbid A 64-bit aligned data structure which contains
- * a tsbnum and a tsbindex. Bits 63:32 contain the
- * tsbnum and bits 31:00 contain the tsbindex.
- *
- * Use the HV_PCI_TSBID() macro to construct such
- * values.
- *
- * io_attributes IO attributes for IOMMU mappings. One of more
- * of the attritbute bits are stores in a 64-bit
- * value. The values are defined below.
- *
- * r_addr 64-bit real address
- *
- * pci_device PCI device address. A PCI device address identifies
- * a specific device on a specific PCI bus segment.
- * A PCI device address ia a 32-bit unsigned integer
- * with the following format:
- *
- * 00000000.bbbbbbbb.dddddfff.00000000
- *
- * Use the HV_PCI_DEVICE_BUILD() macro to construct
- * such values.
- *
- * pci_config_offset
- * PCI configureation space offset. For conventional
- * PCI a value between 0 and 255. For extended
- * configuration space, a value between 0 and 4095.
- *
- * Note: For PCI configuration space accesses, the offset
- * must be aligned to the access size.
- *
- * error_flag A return value which specifies if the action succeeded
- * or failed. 0 means no error, non-0 means some error
- * occurred while performing the service.
- *
- * io_sync_direction
- * Direction definition for pci_dma_sync(), defined
- * below in HV_PCI_SYNC_*.
- *
- * io_page_list A list of io_page_addresses, an io_page_address is
- * a real address.
- *
- * io_page_list_p A pointer to an io_page_list.
- *
- * "size based byte swap" - Some functions do size based byte swapping
- * which allows sw to access pointers and
- * counters in native form when the processor
- * operates in a different endianness than the
- * IO bus. Size-based byte swapping converts a
- * multi-byte field between big-endian and
- * little-endian format.
- */
-
-#define HV_PCI_MAP_ATTR_READ 0x01
-#define HV_PCI_MAP_ATTR_WRITE 0x02
-
-#define HV_PCI_DEVICE_BUILD(b,d,f) \
- ((((b) & 0xff) << 16) | \
- (((d) & 0x1f) << 11) | \
- (((f) & 0x07) << 8))
-
-#define HV_PCI_TSBID(__tsb_num, __tsb_index) \
- ((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index)))
-
-#define HV_PCI_SYNC_FOR_DEVICE 0x01
-#define HV_PCI_SYNC_FOR_CPU 0x02
-
-/* pci_iommu_map()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_IOMMU_MAP
- * ARG0: devhandle
- * ARG1: tsbid
- * ARG2: #ttes
- * ARG3: io_attributes
- * ARG4: io_page_list_p
- * RET0: status
- * RET1: #ttes mapped
- * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex/io_attributes
- * EBADALIGN Improperly aligned real address
- * ENORADDR Invalid real address
- *
- * Create IOMMU mappings in the sun4v device defined by the given
- * devhandle. The mappings are created in the TSB defined by the
- * tsbnum component of the given tsbid. The first mapping is created
- * in the TSB i ndex defined by the tsbindex component of the given tsbid.
- * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex,
- * the second at tsbnum, tsbindex + 1, etc.
- *
- * All mappings are created with the attributes defined by the io_attributes
- * argument. The page mapping addresses are described in the io_page_list
- * defined by the given io_page_list_p, which is a pointer to the io_page_list.
- * The first entry in the io_page_list is the address for the first iotte, the
- * 2nd for the 2nd iotte, and so on.
- *
- * Each io_page_address in the io_page_list must be appropriately aligned.
- * #ttes must be greater than zero. For this version of the spec, the tsbnum
- * component of the given tsbid must be zero.
- *
- * Returns the actual number of mappings creates, which may be less than
- * or equal to the argument #ttes. If the function returns a value which
- * is less than the #ttes, the caller may continus to call the function with
- * an updated tsbid, #ttes, io_page_list_p arguments until all pages are
- * mapped.
- *
- * Note: This function does not imply an iotte cache flush. The guest must
- * demap an entry before re-mapping it.
- */
-#define HV_FAST_PCI_IOMMU_MAP 0xb0
-
-/* pci_iommu_demap()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_IOMMU_DEMAP
- * ARG0: devhandle
- * ARG1: tsbid
- * ARG2: #ttes
- * RET0: status
- * RET1: #ttes demapped
- * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex
- *
- * Demap and flush IOMMU mappings in the device defined by the given
- * devhandle. Demaps up to #ttes entries in the TSB defined by the tsbnum
- * component of the given tsbid, starting at the TSB index defined by the
- * tsbindex component of the given tsbid.
- *
- * For this version of the spec, the tsbnum of the given tsbid must be zero.
- * #ttes must be greater than zero.
- *
- * Returns the actual number of ttes demapped, which may be less than or equal
- * to the argument #ttes. If #ttes demapped is less than #ttes, the caller
- * may continue to call this function with updated tsbid and #ttes arguments
- * until all pages are demapped.
- *
- * Note: Entries do not have to be mapped to be demapped. A demap of an
- * unmapped page will flush the entry from the tte cache.
- */
-#define HV_FAST_PCI_IOMMU_DEMAP 0xb1
-
-/* pci_iommu_getmap()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_IOMMU_GETMAP
- * ARG0: devhandle
- * ARG1: tsbid
- * RET0: status
- * RET1: io_attributes
- * RET2: real address
- * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex
- * ENOMAP Mapping is not valid, no translation exists
- *
- * Read and return the mapping in the device described by the given devhandle
- * and tsbid. If successful, the io_attributes shall be returned in RET1
- * and the page address of the mapping shall be returned in RET2.
- *
- * For this version of the spec, the tsbnum component of the given tsbid
- * must be zero.
- */
-#define HV_FAST_PCI_IOMMU_GETMAP 0xb2
-
-/* pci_iommu_getbypass()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_IOMMU_GETBYPASS
- * ARG0: devhandle
- * ARG1: real address
- * ARG2: io_attributes
- * RET0: status
- * RET1: io_addr
- * ERRORS: EINVAL Invalid devhandle/io_attributes
- * ENORADDR Invalid real address
- * ENOTSUPPORTED Function not supported in this implementation.
- *
- * Create a "special" mapping in the device described by the given devhandle,
- * for the given real address and attributes. Return the IO address in RET1
- * if successful.
- */
-#define HV_FAST_PCI_IOMMU_GETBYPASS 0xb3
-
-/* pci_config_get()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_CONFIG_GET
- * ARG0: devhandle
- * ARG1: pci_device
- * ARG2: pci_config_offset
- * ARG3: size
- * RET0: status
- * RET1: error_flag
- * RET2: data
- * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size
- * EBADALIGN pci_config_offset not size aligned
- * ENOACCESS Access to this offset is not permitted
- *
- * Read PCI configuration space for the adapter described by the given
- * devhandle. Read size (1, 2, or 4) bytes of data from the given
- * pci_device, at pci_config_offset from the beginning of the device's
- * configuration space. If there was no error, RET1 is set to zero and
- * RET2 is set to the data read. Insignificant bits in RET2 are not
- * guarenteed to have any specific value and therefore must be ignored.
- *
- * The data returned in RET2 is size based byte swapped.
- *
- * If an error occurs during the read, set RET1 to a non-zero value. The
- * given pci_config_offset must be 'size' aligned.
- */
-#define HV_FAST_PCI_CONFIG_GET 0xb4
-
-/* pci_config_put()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_CONFIG_PUT
- * ARG0: devhandle
- * ARG1: pci_device
- * ARG2: pci_config_offset
- * ARG3: size
- * ARG4: data
- * RET0: status
- * RET1: error_flag
- * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size
- * EBADALIGN pci_config_offset not size aligned
- * ENOACCESS Access to this offset is not permitted
- *
- * Write PCI configuration space for the adapter described by the given
- * devhandle. Write size (1, 2, or 4) bytes of data in a single operation,
- * at pci_config_offset from the beginning of the device's configuration
- * space. The data argument contains the data to be written to configuration
- * space. Prior to writing, the data is size based byte swapped.
- *
- * If an error occurs during the write access, do not generate an error
- * report, do set RET1 to a non-zero value. Otherwise RET1 is zero.
- * The given pci_config_offset must be 'size' aligned.
- *
- * This function is permitted to read from offset zero in the configuration
- * space described by the given pci_device if necessary to ensure that the
- * write access to config space completes.
- */
-#define HV_FAST_PCI_CONFIG_PUT 0xb5
-
-/* pci_peek()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_PEEK
- * ARG0: devhandle
- * ARG1: real address
- * ARG2: size
- * RET0: status
- * RET1: error_flag
- * RET2: data
- * ERRORS: EINVAL Invalid devhandle or size
- * EBADALIGN Improperly aligned real address
- * ENORADDR Bad real address
- * ENOACCESS Guest access prohibited
- *
- * Attempt to read the IO address given by the given devhandle, real address,
- * and size. Size must be 1, 2, 4, or 8. The read is performed as a single
- * access operation using the given size. If an error occurs when reading
- * from the given location, do not generate an error report, but return a
- * non-zero value in RET1. If the read was successful, return zero in RET1
- * and return the actual data read in RET2. The data returned is size based
- * byte swapped.
- *
- * Non-significant bits in RET2 are not guarenteed to have any specific value
- * and therefore must be ignored. If RET1 is returned as non-zero, the data
- * value is not guarenteed to have any specific value and should be ignored.
- *
- * The caller must have permission to read from the given devhandle, real
- * address, which must be an IO address. The argument real address must be a
- * size aligned address.
- *
- * The hypervisor implementation of this function must block access to any
- * IO address that the guest does not have explicit permission to access.
- */
-#define HV_FAST_PCI_PEEK 0xb6
-
-/* pci_poke()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_POKE
- * ARG0: devhandle
- * ARG1: real address
- * ARG2: size
- * ARG3: data
- * ARG4: pci_device
- * RET0: status
- * RET1: error_flag
- * ERRORS: EINVAL Invalid devhandle, size, or pci_device
- * EBADALIGN Improperly aligned real address
- * ENORADDR Bad real address
- * ENOACCESS Guest access prohibited
- * ENOTSUPPORTED Function is not supported by implementation
- *
- * Attempt to write data to the IO address given by the given devhandle,
- * real address, and size. Size must be 1, 2, 4, or 8. The write is
- * performed as a single access operation using the given size. Prior to
- * writing the data is size based swapped.
- *
- * If an error occurs when writing to the given location, do not generate an
- * error report, but return a non-zero value in RET1. If the write was
- * successful, return zero in RET1.
- *
- * pci_device describes the configuration address of the device being
- * written to. The implementation may safely read from offset 0 with
- * the configuration space of the device described by devhandle and
- * pci_device in order to guarantee that the write portion of the operation
- * completes
- *
- * Any error that occurs due to the read shall be reported using the normal
- * error reporting mechanisms .. the read error is not suppressed.
- *
- * The caller must have permission to write to the given devhandle, real
- * address, which must be an IO address. The argument real address must be a
- * size aligned address. The caller must have permission to read from
- * the given devhandle, pci_device cofiguration space offset 0.
- *
- * The hypervisor implementation of this function must block access to any
- * IO address that the guest does not have explicit permission to access.
- */
-#define HV_FAST_PCI_POKE 0xb7
-
-/* pci_dma_sync()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_DMA_SYNC
- * ARG0: devhandle
- * ARG1: real address
- * ARG2: size
- * ARG3: io_sync_direction
- * RET0: status
- * RET1: #synced
- * ERRORS: EINVAL Invalid devhandle or io_sync_direction
- * ENORADDR Bad real address
- *
- * Synchronize a memory region described by the given real address and size,
- * for the device defined by the given devhandle using the direction(s)
- * defined by the given io_sync_direction. The argument size is the size of
- * the memory region in bytes.
- *
- * Return the actual number of bytes synchronized in the return value #synced,
- * which may be less than or equal to the argument size. If the return
- * value #synced is less than size, the caller must continue to call this
- * function with updated real address and size arguments until the entire
- * memory region is synchronized.
- */
-#define HV_FAST_PCI_DMA_SYNC 0xb8
-
-/* PCI MSI services. */
-
-#define HV_MSITYPE_MSI32 0x00
-#define HV_MSITYPE_MSI64 0x01
-
-#define HV_MSIQSTATE_IDLE 0x00
-#define HV_MSIQSTATE_ERROR 0x01
-
-#define HV_MSIQ_INVALID 0x00
-#define HV_MSIQ_VALID 0x01
-
-#define HV_MSISTATE_IDLE 0x00
-#define HV_MSISTATE_DELIVERED 0x01
-
-#define HV_MSIVALID_INVALID 0x00
-#define HV_MSIVALID_VALID 0x01
-
-#define HV_PCIE_MSGTYPE_PME_MSG 0x18
-#define HV_PCIE_MSGTYPE_PME_ACK_MSG 0x1b
-#define HV_PCIE_MSGTYPE_CORR_MSG 0x30
-#define HV_PCIE_MSGTYPE_NONFATAL_MSG 0x31
-#define HV_PCIE_MSGTYPE_FATAL_MSG 0x33
-
-#define HV_MSG_INVALID 0x00
-#define HV_MSG_VALID 0x01
-
-/* pci_msiq_conf()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_CONF
- * ARG0: devhandle
- * ARG1: msiqid
- * ARG2: real address
- * ARG3: number of entries
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle, msiqid or nentries
- * EBADALIGN Improperly aligned real address
- * ENORADDR Bad real address
- *
- * Configure the MSI queue given by the devhandle and msiqid arguments,
- * and to be placed at the given real address and be of the given
- * number of entries. The real address must be aligned exactly to match
- * the queue size. Each queue entry is 64-bytes long, so f.e. a 32 entry
- * queue must be aligned on a 2048 byte real address boundary. The MSI-EQ
- * Head and Tail are initialized so that the MSI-EQ is 'empty'.
- *
- * Implementation Note: Certain implementations have fixed sized queues. In
- * that case, number of entries must contain the correct
- * value.
- */
-#define HV_FAST_PCI_MSIQ_CONF 0xc0
-
-/* pci_msiq_info()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_INFO
- * ARG0: devhandle
- * ARG1: msiqid
- * RET0: status
- * RET1: real address
- * RET2: number of entries
- * ERRORS: EINVAL Invalid devhandle or msiqid
- *
- * Return the configuration information for the MSI queue described
- * by the given devhandle and msiqid. The base address of the queue
- * is returned in ARG1 and the number of entries is returned in ARG2.
- * If the queue is unconfigured, the real address is undefined and the
- * number of entries will be returned as zero.
- */
-#define HV_FAST_PCI_MSIQ_INFO 0xc1
-
-/* pci_msiq_getvalid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID
- * ARG0: devhandle
- * ARG1: msiqid
- * RET0: status
- * RET1: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID)
- * ERRORS: EINVAL Invalid devhandle or msiqid
- *
- * Get the valid state of the MSI-EQ described by the given devhandle and
- * msiqid.
- */
-#define HV_FAST_PCI_MSIQ_GETVALID 0xc2
-
-/* pci_msiq_setvalid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_SETVALID
- * ARG0: devhandle
- * ARG1: msiqid
- * ARG2: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID)
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle or msiqid or msiqvalid
- * value or MSI EQ is uninitialized
- *
- * Set the valid state of the MSI-EQ described by the given devhandle and
- * msiqid to the given msiqvalid.
- */
-#define HV_FAST_PCI_MSIQ_SETVALID 0xc3
-
-/* pci_msiq_getstate()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_GETSTATE
- * ARG0: devhandle
- * ARG1: msiqid
- * RET0: status
- * RET1: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
- * ERRORS: EINVAL Invalid devhandle or msiqid
- *
- * Get the state of the MSI-EQ described by the given devhandle and
- * msiqid.
- */
-#define HV_FAST_PCI_MSIQ_GETSTATE 0xc4
-
-/* pci_msiq_getvalid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID
- * ARG0: devhandle
- * ARG1: msiqid
- * ARG2: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle or msiqid or msiqstate
- * value or MSI EQ is uninitialized
- *
- * Set the state of the MSI-EQ described by the given devhandle and
- * msiqid to the given msiqvalid.
- */
-#define HV_FAST_PCI_MSIQ_SETSTATE 0xc5
-
-/* pci_msiq_gethead()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_GETHEAD
- * ARG0: devhandle
- * ARG1: msiqid
- * RET0: status
- * RET1: msiqhead
- * ERRORS: EINVAL Invalid devhandle or msiqid
- *
- * Get the current MSI EQ queue head for the MSI-EQ described by the
- * given devhandle and msiqid.
- */
-#define HV_FAST_PCI_MSIQ_GETHEAD 0xc6
-
-/* pci_msiq_sethead()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_SETHEAD
- * ARG0: devhandle
- * ARG1: msiqid
- * ARG2: msiqhead
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle or msiqid or msiqhead,
- * or MSI EQ is uninitialized
- *
- * Set the current MSI EQ queue head for the MSI-EQ described by the
- * given devhandle and msiqid.
- */
-#define HV_FAST_PCI_MSIQ_SETHEAD 0xc7
-
-/* pci_msiq_gettail()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_GETTAIL
- * ARG0: devhandle
- * ARG1: msiqid
- * RET0: status
- * RET1: msiqtail
- * ERRORS: EINVAL Invalid devhandle or msiqid
- *
- * Get the current MSI EQ queue tail for the MSI-EQ described by the
- * given devhandle and msiqid.
- */
-#define HV_FAST_PCI_MSIQ_GETTAIL 0xc8
-
-/* pci_msi_getvalid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSI_GETVALID
- * ARG0: devhandle
- * ARG1: msinum
- * RET0: status
- * RET1: msivalidstate
- * ERRORS: EINVAL Invalid devhandle or msinum
- *
- * Get the current valid/enabled state for the MSI defined by the
- * given devhandle and msinum.
- */
-#define HV_FAST_PCI_MSI_GETVALID 0xc9
-
-/* pci_msi_setvalid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSI_SETVALID
- * ARG0: devhandle
- * ARG1: msinum
- * ARG2: msivalidstate
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle or msinum or msivalidstate
- *
- * Set the current valid/enabled state for the MSI defined by the
- * given devhandle and msinum.
- */
-#define HV_FAST_PCI_MSI_SETVALID 0xca
-
-/* pci_msi_getmsiq()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSI_GETMSIQ
- * ARG0: devhandle
- * ARG1: msinum
- * RET0: status
- * RET1: msiqid
- * ERRORS: EINVAL Invalid devhandle or msinum or MSI is unbound
- *
- * Get the MSI EQ that the MSI defined by the given devhandle and
- * msinum is bound to.
- */
-#define HV_FAST_PCI_MSI_GETMSIQ 0xcb
-
-/* pci_msi_setmsiq()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSI_SETMSIQ
- * ARG0: devhandle
- * ARG1: msinum
- * ARG2: msitype
- * ARG3: msiqid
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle or msinum or msiqid
- *
- * Set the MSI EQ that the MSI defined by the given devhandle and
- * msinum is bound to.
- */
-#define HV_FAST_PCI_MSI_SETMSIQ 0xcc
-
-/* pci_msi_getstate()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSI_GETSTATE
- * ARG0: devhandle
- * ARG1: msinum
- * RET0: status
- * RET1: msistate
- * ERRORS: EINVAL Invalid devhandle or msinum
- *
- * Get the state of the MSI defined by the given devhandle and msinum.
- * If not initialized, return HV_MSISTATE_IDLE.
- */
-#define HV_FAST_PCI_MSI_GETSTATE 0xcd
-
-/* pci_msi_setstate()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSI_SETSTATE
- * ARG0: devhandle
- * ARG1: msinum
- * ARG2: msistate
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle or msinum or msistate
- *
- * Set the state of the MSI defined by the given devhandle and msinum.
- */
-#define HV_FAST_PCI_MSI_SETSTATE 0xce
-
-/* pci_msg_getmsiq()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSG_GETMSIQ
- * ARG0: devhandle
- * ARG1: msgtype
- * RET0: status
- * RET1: msiqid
- * ERRORS: EINVAL Invalid devhandle or msgtype
- *
- * Get the MSI EQ of the MSG defined by the given devhandle and msgtype.
- */
-#define HV_FAST_PCI_MSG_GETMSIQ 0xd0
-
-/* pci_msg_setmsiq()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSG_SETMSIQ
- * ARG0: devhandle
- * ARG1: msgtype
- * ARG2: msiqid
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle, msgtype, or msiqid
- *
- * Set the MSI EQ of the MSG defined by the given devhandle and msgtype.
- */
-#define HV_FAST_PCI_MSG_SETMSIQ 0xd1
-
-/* pci_msg_getvalid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSG_GETVALID
- * ARG0: devhandle
- * ARG1: msgtype
- * RET0: status
- * RET1: msgvalidstate
- * ERRORS: EINVAL Invalid devhandle or msgtype
- *
- * Get the valid/enabled state of the MSG defined by the given
- * devhandle and msgtype.
- */
-#define HV_FAST_PCI_MSG_GETVALID 0xd2
-
-/* pci_msg_setvalid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSG_SETVALID
- * ARG0: devhandle
- * ARG1: msgtype
- * ARG2: msgvalidstate
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle or msgtype or msgvalidstate
- *
- * Set the valid/enabled state of the MSG defined by the given
- * devhandle and msgtype.
- */
-#define HV_FAST_PCI_MSG_SETVALID 0xd3
-
-/* Logical Domain Channel services. */
-
-#define LDC_CHANNEL_DOWN 0
-#define LDC_CHANNEL_UP 1
-#define LDC_CHANNEL_RESETTING 2
-
-/* ldc_tx_qconf()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_TX_QCONF
- * ARG0: channel ID
- * ARG1: real address base of queue
- * ARG2: num entries in queue
- * RET0: status
- *
- * Configure transmit queue for the LDC endpoint specified by the
- * given channel ID, to be placed at the given real address, and
- * be of the given num entries. Num entries must be a power of two.
- * The real address base of the queue must be aligned on the queue
- * size. Each queue entry is 64-bytes, so for example, a 32 entry
- * queue must be aligned on a 2048 byte real address boundary.
- *
- * Upon configuration of a valid transmit queue the head and tail
- * pointers are set to a hypervisor specific identical value indicating
- * that the queue initially is empty.
- *
- * The endpoint's transmit queue is un-configured if num entries is zero.
- *
- * The maximum number of entries for each queue for a specific cpu may be
- * determined from the machine description. A transmit queue may be
- * specified even in the event that the LDC is down (peer endpoint has no
- * receive queue specified). Transmission will begin as soon as the peer
- * endpoint defines a receive queue.
- *
- * It is recommended that a guest wait for a transmit queue to empty prior
- * to reconfiguring it, or un-configuring it. Re or un-configuring of a
- * non-empty transmit queue behaves exactly as defined above, however it
- * is undefined as to how many of the pending entries in the original queue
- * will be delivered prior to the re-configuration taking effect.
- * Furthermore, as the queue configuration causes a reset of the head and
- * tail pointers there is no way for a guest to determine how many entries
- * have been sent after the configuration operation.
- */
-#define HV_FAST_LDC_TX_QCONF 0xe0
-
-/* ldc_tx_qinfo()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_TX_QINFO
- * ARG0: channel ID
- * RET0: status
- * RET1: real address base of queue
- * RET2: num entries in queue
- *
- * Return the configuration info for the transmit queue of LDC endpoint
- * defined by the given channel ID. The real address is the currently
- * defined real address base of the defined queue, and num entries is the
- * size of the queue in terms of number of entries.
- *
- * If the specified channel ID is a valid endpoint number, but no transmit
- * queue has been defined this service will return success, but with num
- * entries set to zero and the real address will have an undefined value.
- */
-#define HV_FAST_LDC_TX_QINFO 0xe1
-
-/* ldc_tx_get_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_TX_GET_STATE
- * ARG0: channel ID
- * RET0: status
- * RET1: head offset
- * RET2: tail offset
- * RET3: channel state
- *
- * Return the transmit state, and the head and tail queue pointers, for
- * the transmit queue of the LDC endpoint defined by the given channel ID.
- * The head and tail values are the byte offset of the head and tail
- * positions of the transmit queue for the specified endpoint.
- */
-#define HV_FAST_LDC_TX_GET_STATE 0xe2
-
-/* ldc_tx_set_qtail()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_TX_SET_QTAIL
- * ARG0: channel ID
- * ARG1: tail offset
- * RET0: status
- *
- * Update the tail pointer for the transmit queue associated with the LDC
- * endpoint defined by the given channel ID. The tail offset specified
- * must be aligned on a 64 byte boundary, and calculated so as to increase
- * the number of pending entries on the transmit queue. Any attempt to
- * decrease the number of pending transmit queue entires is considered
- * an invalid tail offset and will result in an EINVAL error.
- *
- * Since the tail of the transmit queue may not be moved backwards, the
- * transmit queue may be flushed by configuring a new transmit queue,
- * whereupon the hypervisor will configure the initial transmit head and
- * tail pointers to be equal.
- */
-#define HV_FAST_LDC_TX_SET_QTAIL 0xe3
-
-/* ldc_rx_qconf()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_RX_QCONF
- * ARG0: channel ID
- * ARG1: real address base of queue
- * ARG2: num entries in queue
- * RET0: status
- *
- * Configure receive queue for the LDC endpoint specified by the
- * given channel ID, to be placed at the given real address, and
- * be of the given num entries. Num entries must be a power of two.
- * The real address base of the queue must be aligned on the queue
- * size. Each queue entry is 64-bytes, so for example, a 32 entry
- * queue must be aligned on a 2048 byte real address boundary.
- *
- * The endpoint's transmit queue is un-configured if num entries is zero.
- *
- * If a valid receive queue is specified for a local endpoint the LDC is
- * in the up state for the purpose of transmission to this endpoint.
- *
- * The maximum number of entries for each queue for a specific cpu may be
- * determined from the machine description.
- *
- * As receive queue configuration causes a reset of the queue's head and
- * tail pointers there is no way for a gues to determine how many entries
- * have been received between a preceeding ldc_get_rx_state() API call
- * and the completion of the configuration operation. It should be noted
- * that datagram delivery is not guarenteed via domain channels anyway,
- * and therefore any higher protocol should be resilient to datagram
- * loss if necessary. However, to overcome this specific race potential
- * it is recommended, for example, that a higher level protocol be employed
- * to ensure either retransmission, or ensure that no datagrams are pending
- * on the peer endpoint's transmit queue prior to the configuration process.
- */
-#define HV_FAST_LDC_RX_QCONF 0xe4
-
-/* ldc_rx_qinfo()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_RX_QINFO
- * ARG0: channel ID
- * RET0: status
- * RET1: real address base of queue
- * RET2: num entries in queue
- *
- * Return the configuration info for the receive queue of LDC endpoint
- * defined by the given channel ID. The real address is the currently
- * defined real address base of the defined queue, and num entries is the
- * size of the queue in terms of number of entries.
- *
- * If the specified channel ID is a valid endpoint number, but no receive
- * queue has been defined this service will return success, but with num
- * entries set to zero and the real address will have an undefined value.
- */
-#define HV_FAST_LDC_RX_QINFO 0xe5
-
-/* ldc_rx_get_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_RX_GET_STATE
- * ARG0: channel ID
- * RET0: status
- * RET1: head offset
- * RET2: tail offset
- * RET3: channel state
- *
- * Return the receive state, and the head and tail queue pointers, for
- * the receive queue of the LDC endpoint defined by the given channel ID.
- * The head and tail values are the byte offset of the head and tail
- * positions of the receive queue for the specified endpoint.
- */
-#define HV_FAST_LDC_RX_GET_STATE 0xe6
-
-/* ldc_rx_set_qhead()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_RX_SET_QHEAD
- * ARG0: channel ID
- * ARG1: head offset
- * RET0: status
- *
- * Update the head pointer for the receive queue associated with the LDC
- * endpoint defined by the given channel ID. The head offset specified
- * must be aligned on a 64 byte boundary, and calculated so as to decrease
- * the number of pending entries on the receive queue. Any attempt to
- * increase the number of pending receive queue entires is considered
- * an invalid head offset and will result in an EINVAL error.
- *
- * The receive queue may be flushed by setting the head offset equal
- * to the current tail offset.
- */
-#define HV_FAST_LDC_RX_SET_QHEAD 0xe7
-
-/* LDC Map Table Entry. Each slot is defined by a translation table
- * entry, as specified by the LDC_MTE_* bits below, and a 64-bit
- * hypervisor invalidation cookie.
- */
-#define LDC_MTE_PADDR 0x0fffffffffffe000 /* pa[55:13] */
-#define LDC_MTE_COPY_W 0x0000000000000400 /* copy write access */
-#define LDC_MTE_COPY_R 0x0000000000000200 /* copy read access */
-#define LDC_MTE_IOMMU_W 0x0000000000000100 /* IOMMU write access */
-#define LDC_MTE_IOMMU_R 0x0000000000000080 /* IOMMU read access */
-#define LDC_MTE_EXEC 0x0000000000000040 /* execute */
-#define LDC_MTE_WRITE 0x0000000000000020 /* read */
-#define LDC_MTE_READ 0x0000000000000010 /* write */
-#define LDC_MTE_SZALL 0x000000000000000f /* page size bits */
-#define LDC_MTE_SZ16GB 0x0000000000000007 /* 16GB page */
-#define LDC_MTE_SZ2GB 0x0000000000000006 /* 2GB page */
-#define LDC_MTE_SZ256MB 0x0000000000000005 /* 256MB page */
-#define LDC_MTE_SZ32MB 0x0000000000000004 /* 32MB page */
-#define LDC_MTE_SZ4MB 0x0000000000000003 /* 4MB page */
-#define LDC_MTE_SZ512K 0x0000000000000002 /* 512K page */
-#define LDC_MTE_SZ64K 0x0000000000000001 /* 64K page */
-#define LDC_MTE_SZ8K 0x0000000000000000 /* 8K page */
-
-#ifndef __ASSEMBLY__
-struct ldc_mtable_entry {
- unsigned long mte;
- unsigned long cookie;
-};
-#endif
-
-/* ldc_set_map_table()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_SET_MAP_TABLE
- * ARG0: channel ID
- * ARG1: table real address
- * ARG2: num entries
- * RET0: status
- *
- * Register the MTE table at the given table real address, with the
- * specified num entries, for the LDC indicated by the given channel
- * ID.
- */
-#define HV_FAST_LDC_SET_MAP_TABLE 0xea
-
-/* ldc_get_map_table()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_GET_MAP_TABLE
- * ARG0: channel ID
- * RET0: status
- * RET1: table real address
- * RET2: num entries
- *
- * Return the configuration of the current mapping table registered
- * for the given channel ID.
- */
-#define HV_FAST_LDC_GET_MAP_TABLE 0xeb
-
-#define LDC_COPY_IN 0
-#define LDC_COPY_OUT 1
-
-/* ldc_copy()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_COPY
- * ARG0: channel ID
- * ARG1: LDC_COPY_* direction code
- * ARG2: target real address
- * ARG3: local real address
- * ARG4: length in bytes
- * RET0: status
- * RET1: actual length in bytes
- */
-#define HV_FAST_LDC_COPY 0xec
-
-#define LDC_MEM_READ 1
-#define LDC_MEM_WRITE 2
-#define LDC_MEM_EXEC 4
-
-/* ldc_mapin()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_MAPIN
- * ARG0: channel ID
- * ARG1: cookie
- * RET0: status
- * RET1: real address
- * RET2: LDC_MEM_* permissions
- */
-#define HV_FAST_LDC_MAPIN 0xed
-
-/* ldc_unmap()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_UNMAP
- * ARG0: real address
- * RET0: status
- */
-#define HV_FAST_LDC_UNMAP 0xee
-
-/* ldc_revoke()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_REVOKE
- * ARG0: channel ID
- * ARG1: cookie
- * ARG2: ldc_mtable_entry cookie
- * RET0: status
- */
-#define HV_FAST_LDC_REVOKE 0xef
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel,
- unsigned long ra,
- unsigned long num_entries);
-extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel,
- unsigned long *ra,
- unsigned long *num_entries);
-extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel,
- unsigned long *head_off,
- unsigned long *tail_off,
- unsigned long *chan_state);
-extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel,
- unsigned long tail_off);
-extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel,
- unsigned long ra,
- unsigned long num_entries);
-extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel,
- unsigned long *ra,
- unsigned long *num_entries);
-extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel,
- unsigned long *head_off,
- unsigned long *tail_off,
- unsigned long *chan_state);
-extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel,
- unsigned long head_off);
-extern unsigned long sun4v_ldc_set_map_table(unsigned long channel,
- unsigned long ra,
- unsigned long num_entries);
-extern unsigned long sun4v_ldc_get_map_table(unsigned long channel,
- unsigned long *ra,
- unsigned long *num_entries);
-extern unsigned long sun4v_ldc_copy(unsigned long channel,
- unsigned long dir_code,
- unsigned long tgt_raddr,
- unsigned long lcl_raddr,
- unsigned long len,
- unsigned long *actual_len);
-extern unsigned long sun4v_ldc_mapin(unsigned long channel,
- unsigned long cookie,
- unsigned long *ra,
- unsigned long *perm);
-extern unsigned long sun4v_ldc_unmap(unsigned long ra);
-extern unsigned long sun4v_ldc_revoke(unsigned long channel,
- unsigned long cookie,
- unsigned long mte_cookie);
-#endif
-
-/* Performance counter services. */
-
-#define HV_PERF_JBUS_PERF_CTRL_REG 0x00
-#define HV_PERF_JBUS_PERF_CNT_REG 0x01
-#define HV_PERF_DRAM_PERF_CTRL_REG_0 0x02
-#define HV_PERF_DRAM_PERF_CNT_REG_0 0x03
-#define HV_PERF_DRAM_PERF_CTRL_REG_1 0x04
-#define HV_PERF_DRAM_PERF_CNT_REG_1 0x05
-#define HV_PERF_DRAM_PERF_CTRL_REG_2 0x06
-#define HV_PERF_DRAM_PERF_CNT_REG_2 0x07
-#define HV_PERF_DRAM_PERF_CTRL_REG_3 0x08
-#define HV_PERF_DRAM_PERF_CNT_REG_3 0x09
-
-/* get_perfreg()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_GET_PERFREG
- * ARG0: performance reg number
- * RET0: status
- * RET1: performance reg value
- * ERRORS: EINVAL Invalid performance register number
- * ENOACCESS No access allowed to performance counters
- *
- * Read the value of the given DRAM/JBUS performance counter/control register.
- */
-#define HV_FAST_GET_PERFREG 0x100
-
-/* set_perfreg()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_SET_PERFREG
- * ARG0: performance reg number
- * ARG1: performance reg value
- * RET0: status
- * ERRORS: EINVAL Invalid performance register number
- * ENOACCESS No access allowed to performance counters
- *
- * Write the given performance reg value to the given DRAM/JBUS
- * performance counter/control register.
- */
-#define HV_FAST_SET_PERFREG 0x101
-
-/* MMU statistics services.
- *
- * The hypervisor maintains MMU statistics and privileged code provides
- * a buffer where these statistics can be collected. It is continually
- * updated once configured. The layout is as follows:
- */
-#ifndef __ASSEMBLY__
-struct hv_mmu_statistics {
- unsigned long immu_tsb_hits_ctx0_8k_tte;
- unsigned long immu_tsb_ticks_ctx0_8k_tte;
- unsigned long immu_tsb_hits_ctx0_64k_tte;
- unsigned long immu_tsb_ticks_ctx0_64k_tte;
- unsigned long __reserved1[2];
- unsigned long immu_tsb_hits_ctx0_4mb_tte;
- unsigned long immu_tsb_ticks_ctx0_4mb_tte;
- unsigned long __reserved2[2];
- unsigned long immu_tsb_hits_ctx0_256mb_tte;
- unsigned long immu_tsb_ticks_ctx0_256mb_tte;
- unsigned long __reserved3[4];
- unsigned long immu_tsb_hits_ctxnon0_8k_tte;
- unsigned long immu_tsb_ticks_ctxnon0_8k_tte;
- unsigned long immu_tsb_hits_ctxnon0_64k_tte;
- unsigned long immu_tsb_ticks_ctxnon0_64k_tte;
- unsigned long __reserved4[2];
- unsigned long immu_tsb_hits_ctxnon0_4mb_tte;
- unsigned long immu_tsb_ticks_ctxnon0_4mb_tte;
- unsigned long __reserved5[2];
- unsigned long immu_tsb_hits_ctxnon0_256mb_tte;
- unsigned long immu_tsb_ticks_ctxnon0_256mb_tte;
- unsigned long __reserved6[4];
- unsigned long dmmu_tsb_hits_ctx0_8k_tte;
- unsigned long dmmu_tsb_ticks_ctx0_8k_tte;
- unsigned long dmmu_tsb_hits_ctx0_64k_tte;
- unsigned long dmmu_tsb_ticks_ctx0_64k_tte;
- unsigned long __reserved7[2];
- unsigned long dmmu_tsb_hits_ctx0_4mb_tte;
- unsigned long dmmu_tsb_ticks_ctx0_4mb_tte;
- unsigned long __reserved8[2];
- unsigned long dmmu_tsb_hits_ctx0_256mb_tte;
- unsigned long dmmu_tsb_ticks_ctx0_256mb_tte;
- unsigned long __reserved9[4];
- unsigned long dmmu_tsb_hits_ctxnon0_8k_tte;
- unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte;
- unsigned long dmmu_tsb_hits_ctxnon0_64k_tte;
- unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte;
- unsigned long __reserved10[2];
- unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte;
- unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte;
- unsigned long __reserved11[2];
- unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte;
- unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte;
- unsigned long __reserved12[4];
-};
-#endif
-
-/* mmustat_conf()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMUSTAT_CONF
- * ARG0: real address
- * RET0: status
- * RET1: real address
- * ERRORS: ENORADDR Invalid real address
- * EBADALIGN Real address not aligned on 64-byte boundary
- * EBADTRAP API not supported on this processor
- *
- * Enable MMU statistic gathering using the buffer at the given real
- * address on the current virtual CPU. The new buffer real address
- * is given in ARG1, and the previously specified buffer real address
- * is returned in RET1, or is returned as zero for the first invocation.
- *
- * If the passed in real address argument is zero, this will disable
- * MMU statistic collection on the current virtual CPU. If an error is
- * returned then no statistics are collected.
- *
- * The buffer contents should be initialized to all zeros before being
- * given to the hypervisor or else the statistics will be meaningless.
- */
-#define HV_FAST_MMUSTAT_CONF 0x102
-
-/* mmustat_info()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMUSTAT_INFO
- * RET0: status
- * RET1: real address
- * ERRORS: EBADTRAP API not supported on this processor
- *
- * Return the current state and real address of the currently configured
- * MMU statistics buffer on the current virtual CPU.
- */
-#define HV_FAST_MMUSTAT_INFO 0x103
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mmustat_conf(unsigned long ra, unsigned long *orig_ra);
-extern unsigned long sun4v_mmustat_info(unsigned long *ra);
-#endif
-
-/* NCS crypto services */
-
-/* ncs_request() sub-function numbers */
-#define HV_NCS_QCONF 0x01
-#define HV_NCS_QTAIL_UPDATE 0x02
-
-#ifndef __ASSEMBLY__
-struct hv_ncs_queue_entry {
- /* MAU Control Register */
- unsigned long mau_control;
-#define MAU_CONTROL_INV_PARITY 0x0000000000002000
-#define MAU_CONTROL_STRAND 0x0000000000001800
-#define MAU_CONTROL_BUSY 0x0000000000000400
-#define MAU_CONTROL_INT 0x0000000000000200
-#define MAU_CONTROL_OP 0x00000000000001c0
-#define MAU_CONTROL_OP_SHIFT 6
-#define MAU_OP_LOAD_MA_MEMORY 0x0
-#define MAU_OP_STORE_MA_MEMORY 0x1
-#define MAU_OP_MODULAR_MULT 0x2
-#define MAU_OP_MODULAR_REDUCE 0x3
-#define MAU_OP_MODULAR_EXP_LOOP 0x4
-#define MAU_CONTROL_LEN 0x000000000000003f
-#define MAU_CONTROL_LEN_SHIFT 0
-
- /* Real address of bytes to load or store bytes
- * into/out-of the MAU.
- */
- unsigned long mau_mpa;
-
- /* Modular Arithmetic MA Offset Register. */
- unsigned long mau_ma;
-
- /* Modular Arithmetic N Prime Register. */
- unsigned long mau_np;
-};
-
-struct hv_ncs_qconf_arg {
- unsigned long mid; /* MAU ID, 1 per core on Niagara */
- unsigned long base; /* Real address base of queue */
- unsigned long end; /* Real address end of queue */
- unsigned long num_ents; /* Number of entries in queue */
-};
-
-struct hv_ncs_qtail_update_arg {
- unsigned long mid; /* MAU ID, 1 per core on Niagara */
- unsigned long tail; /* New tail index to use */
- unsigned long syncflag; /* only SYNCFLAG_SYNC is implemented */
-#define HV_NCS_SYNCFLAG_SYNC 0x00
-#define HV_NCS_SYNCFLAG_ASYNC 0x01
-};
-#endif
-
-/* ncs_request()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_NCS_REQUEST
- * ARG0: NCS sub-function
- * ARG1: sub-function argument real address
- * ARG2: size in bytes of sub-function argument
- * RET0: status
- *
- * The MAU chip of the Niagara processor is not directly accessible
- * to privileged code, instead it is programmed indirectly via this
- * hypervisor API.
- *
- * The interfaces defines a queue of MAU operations to perform.
- * Privileged code registers a queue with the hypervisor by invoking
- * this HVAPI with the HV_NCS_QCONF sub-function, which defines the
- * base, end, and number of entries of the queue. Each queue entry
- * contains a MAU register struct block.
- *
- * The privileged code then proceeds to add entries to the queue and
- * then invoke the HV_NCS_QTAIL_UPDATE sub-function. Since only
- * synchronous operations are supported by the current hypervisor,
- * HV_NCS_QTAIL_UPDATE will run all the pending queue entries to
- * completion and return HV_EOK, or return an error code.
- *
- * The real address of the sub-function argument must be aligned on at
- * least an 8-byte boundary.
- *
- * The tail argument of HV_NCS_QTAIL_UPDATE is an index, not a byte
- * offset, into the queue and must be less than or equal the 'num_ents'
- * argument given in the HV_NCS_QCONF call.
- */
-#define HV_FAST_NCS_REQUEST 0x110
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_ncs_request(unsigned long request,
- unsigned long arg_ra,
- unsigned long arg_size);
-#endif
-
-#define HV_FAST_FIRE_GET_PERFREG 0x120
-#define HV_FAST_FIRE_SET_PERFREG 0x121
-
-/* Function numbers for HV_CORE_TRAP. */
-#define HV_CORE_SET_VER 0x00
-#define HV_CORE_PUTCHAR 0x01
-#define HV_CORE_EXIT 0x02
-#define HV_CORE_GET_VER 0x03
-
-/* Hypervisor API groups for use with HV_CORE_SET_VER and
- * HV_CORE_GET_VER.
- */
-#define HV_GRP_SUN4V 0x0000
-#define HV_GRP_CORE 0x0001
-#define HV_GRP_INTR 0x0002
-#define HV_GRP_SOFT_STATE 0x0003
-#define HV_GRP_PCI 0x0100
-#define HV_GRP_LDOM 0x0101
-#define HV_GRP_SVC_CHAN 0x0102
-#define HV_GRP_NCS 0x0103
-#define HV_GRP_NIAG_PERF 0x0200
-#define HV_GRP_FIRE_PERF 0x0201
-#define HV_GRP_DIAG 0x0300
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_get_version(unsigned long group,
- unsigned long *major,
- unsigned long *minor);
-extern unsigned long sun4v_set_version(unsigned long group,
- unsigned long major,
- unsigned long minor,
- unsigned long *actual_minor);
-
-extern int sun4v_hvapi_register(unsigned long group, unsigned long major,
- unsigned long *minor);
-extern void sun4v_hvapi_unregister(unsigned long group);
-extern int sun4v_hvapi_get(unsigned long group,
- unsigned long *major,
- unsigned long *minor);
-extern void sun4v_hvapi_init(void);
-#endif
-
-#endif /* !(_SPARC64_HYPERVISOR_H) */
+#include <asm-sparc/hypervisor.h>
diff --git a/include/asm-sparc64/intr_queue.h b/include/asm-sparc64/intr_queue.h
index 206077dedc2..f7225015b3d 100644
--- a/include/asm-sparc64/intr_queue.h
+++ b/include/asm-sparc64/intr_queue.h
@@ -1,15 +1 @@
-#ifndef _SPARC64_INTR_QUEUE_H
-#define _SPARC64_INTR_QUEUE_H
-
-/* Sun4v interrupt queue registers, accessed via ASI_QUEUE. */
-
-#define INTRQ_CPU_MONDO_HEAD 0x3c0 /* CPU mondo head */
-#define INTRQ_CPU_MONDO_TAIL 0x3c8 /* CPU mondo tail */
-#define INTRQ_DEVICE_MONDO_HEAD 0x3d0 /* Device mondo head */
-#define INTRQ_DEVICE_MONDO_TAIL 0x3d8 /* Device mondo tail */
-#define INTRQ_RESUM_MONDO_HEAD 0x3e0 /* Resumable error mondo head */
-#define INTRQ_RESUM_MONDO_TAIL 0x3e8 /* Resumable error mondo tail */
-#define INTRQ_NONRESUM_MONDO_HEAD 0x3f0 /* Non-resumable error mondo head */
-#define INTRQ_NONRESUM_MONDO_TAIL 0x3f8 /* Non-resumable error mondo head */
-
-#endif /* !(_SPARC64_INTR_QUEUE_H) */
+#include <asm-sparc/intr_queue.h>
diff --git a/include/asm-sparc64/kprobes.h b/include/asm-sparc64/kprobes.h
index 5879d71afda..c55e43e4d2a 100644
--- a/include/asm-sparc64/kprobes.h
+++ b/include/asm-sparc64/kprobes.h
@@ -1,49 +1 @@
-#ifndef _SPARC64_KPROBES_H
-#define _SPARC64_KPROBES_H
-
-#include <linux/types.h>
-#include <linux/percpu.h>
-
-typedef u32 kprobe_opcode_t;
-
-#define BREAKPOINT_INSTRUCTION 0x91d02070 /* ta 0x70 */
-#define BREAKPOINT_INSTRUCTION_2 0x91d02071 /* ta 0x71 */
-#define MAX_INSN_SIZE 2
-
-#define kretprobe_blacklist_size 0
-
-#define arch_remove_kprobe(p) do {} while (0)
-
-#define flush_insn_slot(p) \
-do { flushi(&(p)->ainsn.insn[0]); \
- flushi(&(p)->ainsn.insn[1]); \
-} while (0)
-
-void kretprobe_trampoline(void);
-
-/* Architecture specific copy of original instruction*/
-struct arch_specific_insn {
- /* copy of the original instruction */
- kprobe_opcode_t insn[MAX_INSN_SIZE];
-};
-
-struct prev_kprobe {
- struct kprobe *kp;
- unsigned long status;
- unsigned long orig_tnpc;
- unsigned long orig_tstate_pil;
-};
-
-/* per-cpu kprobe control block */
-struct kprobe_ctlblk {
- unsigned long kprobe_status;
- unsigned long kprobe_orig_tnpc;
- unsigned long kprobe_orig_tstate_pil;
- struct pt_regs jprobe_saved_regs;
- struct prev_kprobe prev_kprobe;
-};
-
-extern int kprobe_exceptions_notify(struct notifier_block *self,
- unsigned long val, void *data);
-extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
-#endif /* _SPARC64_KPROBES_H */
+#include <asm-sparc/kprobes.h>
diff --git a/include/asm-sparc64/ldc.h b/include/asm-sparc64/ldc.h
index bdb524a7b81..40f3f231c45 100644
--- a/include/asm-sparc64/ldc.h
+++ b/include/asm-sparc64/ldc.h
@@ -1,138 +1 @@
-#ifndef _SPARC64_LDC_H
-#define _SPARC64_LDC_H
-
-#include <asm/hypervisor.h>
-
-extern int ldom_domaining_enabled;
-extern void ldom_set_var(const char *var, const char *value);
-extern void ldom_reboot(const char *boot_command);
-extern void ldom_power_off(void);
-
-/* The event handler will be evoked when link state changes
- * or data becomes available on the receive side.
- *
- * For non-RAW links, if the LDC_EVENT_RESET event arrives the
- * driver should reset all of it's internal state and reinvoke
- * ldc_connect() to try and bring the link up again.
- *
- * For RAW links, ldc_connect() is not used. Instead the driver
- * just waits for the LDC_EVENT_UP event.
- */
-struct ldc_channel_config {
- void (*event)(void *arg, int event);
-
- u32 mtu;
- unsigned int rx_irq;
- unsigned int tx_irq;
- u8 mode;
-#define LDC_MODE_RAW 0x00
-#define LDC_MODE_UNRELIABLE 0x01
-#define LDC_MODE_RESERVED 0x02
-#define LDC_MODE_STREAM 0x03
-
- u8 debug;
-#define LDC_DEBUG_HS 0x01
-#define LDC_DEBUG_STATE 0x02
-#define LDC_DEBUG_RX 0x04
-#define LDC_DEBUG_TX 0x08
-#define LDC_DEBUG_DATA 0x10
-};
-
-#define LDC_EVENT_RESET 0x01
-#define LDC_EVENT_UP 0x02
-#define LDC_EVENT_DATA_READY 0x04
-
-#define LDC_STATE_INVALID 0x00
-#define LDC_STATE_INIT 0x01
-#define LDC_STATE_BOUND 0x02
-#define LDC_STATE_READY 0x03
-#define LDC_STATE_CONNECTED 0x04
-
-struct ldc_channel;
-
-/* Allocate state for a channel. */
-extern struct ldc_channel *ldc_alloc(unsigned long id,
- const struct ldc_channel_config *cfgp,
- void *event_arg);
-
-/* Shut down and free state for a channel. */
-extern void ldc_free(struct ldc_channel *lp);
-
-/* Register TX and RX queues of the link with the hypervisor. */
-extern int ldc_bind(struct ldc_channel *lp, const char *name);
-
-/* For non-RAW protocols we need to complete a handshake before
- * communication can proceed. ldc_connect() does that, if the
- * handshake completes successfully, an LDC_EVENT_UP event will
- * be sent up to the driver.
- */
-extern int ldc_connect(struct ldc_channel *lp);
-extern int ldc_disconnect(struct ldc_channel *lp);
-
-extern int ldc_state(struct ldc_channel *lp);
-
-/* Read and write operations. Only valid when the link is up. */
-extern int ldc_write(struct ldc_channel *lp, const void *buf,
- unsigned int size);
-extern int ldc_read(struct ldc_channel *lp, void *buf, unsigned int size);
-
-#define LDC_MAP_SHADOW 0x01
-#define LDC_MAP_DIRECT 0x02
-#define LDC_MAP_IO 0x04
-#define LDC_MAP_R 0x08
-#define LDC_MAP_W 0x10
-#define LDC_MAP_X 0x20
-#define LDC_MAP_RW (LDC_MAP_R | LDC_MAP_W)
-#define LDC_MAP_RWX (LDC_MAP_R | LDC_MAP_W | LDC_MAP_X)
-#define LDC_MAP_ALL 0x03f
-
-struct ldc_trans_cookie {
- u64 cookie_addr;
- u64 cookie_size;
-};
-
-struct scatterlist;
-extern int ldc_map_sg(struct ldc_channel *lp,
- struct scatterlist *sg, int num_sg,
- struct ldc_trans_cookie *cookies, int ncookies,
- unsigned int map_perm);
-
-extern int ldc_map_single(struct ldc_channel *lp,
- void *buf, unsigned int len,
- struct ldc_trans_cookie *cookies, int ncookies,
- unsigned int map_perm);
-
-extern void ldc_unmap(struct ldc_channel *lp, struct ldc_trans_cookie *cookies,
- int ncookies);
-
-extern int ldc_copy(struct ldc_channel *lp, int copy_dir,
- void *buf, unsigned int len, unsigned long offset,
- struct ldc_trans_cookie *cookies, int ncookies);
-
-static inline int ldc_get_dring_entry(struct ldc_channel *lp,
- void *buf, unsigned int len,
- unsigned long offset,
- struct ldc_trans_cookie *cookies,
- int ncookies)
-{
- return ldc_copy(lp, LDC_COPY_IN, buf, len, offset, cookies, ncookies);
-}
-
-static inline int ldc_put_dring_entry(struct ldc_channel *lp,
- void *buf, unsigned int len,
- unsigned long offset,
- struct ldc_trans_cookie *cookies,
- int ncookies)
-{
- return ldc_copy(lp, LDC_COPY_OUT, buf, len, offset, cookies, ncookies);
-}
-
-extern void *ldc_alloc_exp_dring(struct ldc_channel *lp, unsigned int len,
- struct ldc_trans_cookie *cookies,
- int *ncookies, unsigned int map_perm);
-
-extern void ldc_free_exp_dring(struct ldc_channel *lp, void *buf,
- unsigned int len,
- struct ldc_trans_cookie *cookies, int ncookies);
-
-#endif /* _SPARC64_LDC_H */
+#include <asm-sparc/ldc.h>
diff --git a/include/asm-sparc64/lmb.h b/include/asm-sparc64/lmb.h
index 6a352cbcf52..3d04981701e 100644
--- a/include/asm-sparc64/lmb.h
+++ b/include/asm-sparc64/lmb.h
@@ -1,10 +1 @@
-#ifndef _SPARC64_LMB_H
-#define _SPARC64_LMB_H
-
-#include <asm/oplib.h>
-
-#define LMB_DBG(fmt...) prom_printf(fmt)
-
-#define LMB_REAL_LIMIT 0
-
-#endif /* !(_SPARC64_LMB_H) */
+#include <asm-sparc/lmb.h>
diff --git a/include/asm-sparc64/lsu.h b/include/asm-sparc64/lsu.h
index 7190f8de90a..4e3d8b128a5 100644
--- a/include/asm-sparc64/lsu.h
+++ b/include/asm-sparc64/lsu.h
@@ -1,19 +1 @@
-#ifndef _SPARC64_LSU_H
-#define _SPARC64_LSU_H
-
-#include <linux/const.h>
-
-/* LSU Control Register */
-#define LSU_CONTROL_PM _AC(0x000001fe00000000,UL) /* Phys-watchpoint byte mask*/
-#define LSU_CONTROL_VM _AC(0x00000001fe000000,UL) /* Virt-watchpoint byte mask*/
-#define LSU_CONTROL_PR _AC(0x0000000001000000,UL) /* Phys-rd watchpoint enable*/
-#define LSU_CONTROL_PW _AC(0x0000000000800000,UL) /* Phys-wr watchpoint enable*/
-#define LSU_CONTROL_VR _AC(0x0000000000400000,UL) /* Virt-rd watchpoint enable*/
-#define LSU_CONTROL_VW _AC(0x0000000000200000,UL) /* Virt-wr watchpoint enable*/
-#define LSU_CONTROL_FM _AC(0x00000000000ffff0,UL) /* Parity mask enables. */
-#define LSU_CONTROL_DM _AC(0x0000000000000008,UL) /* Data MMU enable. */
-#define LSU_CONTROL_IM _AC(0x0000000000000004,UL) /* Instruction MMU enable. */
-#define LSU_CONTROL_DC _AC(0x0000000000000002,UL) /* Data cache enable. */
-#define LSU_CONTROL_IC _AC(0x0000000000000001,UL) /* Instruction cache enable.*/
-
-#endif /* !(_SPARC64_LSU_H) */
+#include <asm-sparc/lsu.h>
diff --git a/include/asm-sparc64/mdesc.h b/include/asm-sparc64/mdesc.h
index 1acc7272e53..165a1934728 100644
--- a/include/asm-sparc64/mdesc.h
+++ b/include/asm-sparc64/mdesc.h
@@ -1,78 +1 @@
-#ifndef _SPARC64_MDESC_H
-#define _SPARC64_MDESC_H
-
-#include <linux/types.h>
-#include <linux/cpumask.h>
-#include <asm/prom.h>
-
-struct mdesc_handle;
-
-/* Machine description operations are to be surrounded by grab and
- * release calls. The mdesc_handle returned from the grab is
- * the first argument to all of the operational calls that work
- * on mdescs.
- */
-extern struct mdesc_handle *mdesc_grab(void);
-extern void mdesc_release(struct mdesc_handle *);
-
-#define MDESC_NODE_NULL (~(u64)0)
-
-extern u64 mdesc_node_by_name(struct mdesc_handle *handle,
- u64 from_node, const char *name);
-#define mdesc_for_each_node_by_name(__hdl, __node, __name) \
- for (__node = mdesc_node_by_name(__hdl, MDESC_NODE_NULL, __name); \
- (__node) != MDESC_NODE_NULL; \
- __node = mdesc_node_by_name(__hdl, __node, __name))
-
-/* Access to property values returned from mdesc_get_property() are
- * only valid inside of a mdesc_grab()/mdesc_release() sequence.
- * Once mdesc_release() is called, the memory backed up by these
- * pointers may reference freed up memory.
- *
- * Therefore callers must make copies of any property values
- * they need.
- *
- * These same rules apply to mdesc_node_name().
- */
-extern const void *mdesc_get_property(struct mdesc_handle *handle,
- u64 node, const char *name, int *lenp);
-extern const char *mdesc_node_name(struct mdesc_handle *hp, u64 node);
-
-/* MD arc iteration, the standard sequence is:
- *
- * unsigned long arc;
- * mdesc_for_each_arc(arc, handle, node, MDESC_ARC_TYPE_{FWD,BACK}) {
- * unsigned long target = mdesc_arc_target(handle, arc);
- * ...
- * }
- */
-
-#define MDESC_ARC_TYPE_FWD "fwd"
-#define MDESC_ARC_TYPE_BACK "back"
-
-extern u64 mdesc_next_arc(struct mdesc_handle *handle, u64 from,
- const char *arc_type);
-#define mdesc_for_each_arc(__arc, __hdl, __node, __type) \
- for (__arc = mdesc_next_arc(__hdl, __node, __type); \
- (__arc) != MDESC_NODE_NULL; \
- __arc = mdesc_next_arc(__hdl, __arc, __type))
-
-extern u64 mdesc_arc_target(struct mdesc_handle *hp, u64 arc);
-
-extern void mdesc_update(void);
-
-struct mdesc_notifier_client {
- void (*add)(struct mdesc_handle *handle, u64 node);
- void (*remove)(struct mdesc_handle *handle, u64 node);
-
- const char *node_name;
- struct mdesc_notifier_client *next;
-};
-
-extern void mdesc_register_notifier(struct mdesc_notifier_client *client);
-
-extern void mdesc_fill_in_cpu_data(cpumask_t mask);
-
-extern void sun4v_mdesc_init(void);
-
-#endif
+#include <asm-sparc/mdesc.h>
diff --git a/include/asm-sparc64/mmzone.h b/include/asm-sparc64/mmzone.h
index ebf5986c12e..43a710f7892 100644
--- a/include/asm-sparc64/mmzone.h
+++ b/include/asm-sparc64/mmzone.h
@@ -1,17 +1 @@
-#ifndef _SPARC64_MMZONE_H
-#define _SPARC64_MMZONE_H
-
-#ifdef CONFIG_NEED_MULTIPLE_NODES
-
-extern struct pglist_data *node_data[];
-
-#define NODE_DATA(nid) (node_data[nid])
-#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn)
-
-extern int numa_cpu_lookup_table[];
-extern cpumask_t numa_cpumask_lookup_table[];
-
-#endif /* CONFIG_NEED_MULTIPLE_NODES */
-
-#endif /* _SPARC64_MMZONE_H */
+#include <asm-sparc/mmzone.h>
diff --git a/include/asm-sparc64/ns87303.h b/include/asm-sparc64/ns87303.h
index 686defe6aaa..5f369d4df3d 100644
--- a/include/asm-sparc64/ns87303.h
+++ b/include/asm-sparc64/ns87303.h
@@ -1,118 +1 @@
-/* ns87303.h: Configuration Register Description for the
- * National Semiconductor PC87303 (SuperIO).
- *
- * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
- */
-
-#ifndef _SPARC_NS87303_H
-#define _SPARC_NS87303_H 1
-
-/*
- * Control Register Index Values
- */
-#define FER 0x00
-#define FAR 0x01
-#define PTR 0x02
-#define FCR 0x03
-#define PCR 0x04
-#define KRR 0x05
-#define PMC 0x06
-#define TUP 0x07
-#define SID 0x08
-#define ASC 0x09
-#define CS0CF0 0x0a
-#define CS0CF1 0x0b
-#define CS1CF0 0x0c
-#define CS1CF1 0x0d
-
-/* Function Enable Register (FER) bits */
-#define FER_EDM 0x10 /* Encoded Drive and Motor pin information */
-
-/* Function Address Register (FAR) bits */
-#define FAR_LPT_MASK 0x03
-#define FAR_LPTB 0x00
-#define FAR_LPTA 0x01
-#define FAR_LPTC 0x02
-
-/* Power and Test Register (PTR) bits */
-#define PTR_LPTB_IRQ7 0x08
-#define PTR_LEVEL_IRQ 0x80 /* When not ECP/EPP: Use level IRQ */
-#define PTR_LPT_REG_DIR 0x80 /* When ECP/EPP: LPT CTR controlls direction */
- /* of the parallel port */
-
-/* Function Control Register (FCR) bits */
-#define FCR_LDE 0x10 /* Logical Drive Exchange */
-#define FCR_ZWS_ENA 0x20 /* Enable short host read/write in ECP/EPP */
-
-/* Printer Control Register (PCR) bits */
-#define PCR_EPP_ENABLE 0x01
-#define PCR_EPP_IEEE 0x02 /* Enable EPP Version 1.9 (IEEE 1284) */
-#define PCR_ECP_ENABLE 0x04
-#define PCR_ECP_CLK_ENA 0x08 /* If 0 ECP Clock is stopped on Power down */
-#define PCR_IRQ_POLAR 0x20 /* If 0 IRQ is level high or negative pulse, */
- /* if 1 polarity is inverted */
-#define PCR_IRQ_ODRAIN 0x40 /* If 1, IRQ is open drain */
-
-/* Tape UARTs and Parallel Port Config Register (TUP) bits */
-#define TUP_EPP_TIMO 0x02 /* Enable EPP timeout IRQ */
-
-/* Advanced SuperIO Config Register (ASC) bits */
-#define ASC_LPT_IRQ7 0x01 /* Always use IRQ7 for LPT */
-#define ASC_DRV2_SEL 0x02 /* Logical Drive Exchange controlled by TDR */
-
-#define FER_RESERVED 0x00
-#define FAR_RESERVED 0x00
-#define PTR_RESERVED 0x73
-#define FCR_RESERVED 0xc4
-#define PCR_RESERVED 0x10
-#define KRR_RESERVED 0x00
-#define PMC_RESERVED 0x98
-#define TUP_RESERVED 0xfb
-#define SIP_RESERVED 0x00
-#define ASC_RESERVED 0x18
-#define CS0CF0_RESERVED 0x00
-#define CS0CF1_RESERVED 0x08
-#define CS1CF0_RESERVED 0x00
-#define CS1CF1_RESERVED 0x08
-
-#ifdef __KERNEL__
-
-#include <linux/spinlock.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-
-extern spinlock_t ns87303_lock;
-
-static inline int ns87303_modify(unsigned long port, unsigned int index,
- unsigned char clr, unsigned char set)
-{
- static unsigned char reserved[] = {
- FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED,
- PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED,
- SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED,
- CS1CF0_RESERVED, CS1CF1_RESERVED
- };
- unsigned long flags;
- unsigned char value;
-
- if (index > 0x0d)
- return -EINVAL;
-
- spin_lock_irqsave(&ns87303_lock, flags);
-
- outb(index, port);
- value = inb(port + 1);
- value &= ~(reserved[index] | clr);
- value |= set;
- outb(value, port + 1);
- outb(value, port + 1);
-
- spin_unlock_irqrestore(&ns87303_lock, flags);
-
- return 0;
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* !(_SPARC_NS87303_H) */
+#include <asm-sparc/ns87303.h>
diff --git a/include/asm-sparc64/parport.h b/include/asm-sparc64/parport.h
index e9555b246c8..b4e4ca812eb 100644
--- a/include/asm-sparc64/parport.h
+++ b/include/asm-sparc64/parport.h
@@ -1,246 +1 @@
-/* parport.h: sparc64 specific parport initialization and dma.
- *
- * Copyright (C) 1999 Eddie C. Dost (ecd@skynet.be)
- */
-
-#ifndef _ASM_SPARC64_PARPORT_H
-#define _ASM_SPARC64_PARPORT_H 1
-
-#include <asm/ebus.h>
-#include <asm/ns87303.h>
-#include <asm/of_device.h>
-#include <asm/prom.h>
-
-#define PARPORT_PC_MAX_PORTS PARPORT_MAX
-
-/*
- * While sparc64 doesn't have an ISA DMA API, we provide something that looks
- * close enough to make parport_pc happy
- */
-#define HAS_DMA
-
-static DEFINE_SPINLOCK(dma_spin_lock);
-
-#define claim_dma_lock() \
-({ unsigned long flags; \
- spin_lock_irqsave(&dma_spin_lock, flags); \
- flags; \
-})
-
-#define release_dma_lock(__flags) \
- spin_unlock_irqrestore(&dma_spin_lock, __flags);
-
-static struct sparc_ebus_info {
- struct ebus_dma_info info;
- unsigned int addr;
- unsigned int count;
- int lock;
-
- struct parport *port;
-} sparc_ebus_dmas[PARPORT_PC_MAX_PORTS];
-
-static DECLARE_BITMAP(dma_slot_map, PARPORT_PC_MAX_PORTS);
-
-static inline int request_dma(unsigned int dmanr, const char *device_id)
-{
- if (dmanr >= PARPORT_PC_MAX_PORTS)
- return -EINVAL;
- if (xchg(&sparc_ebus_dmas[dmanr].lock, 1) != 0)
- return -EBUSY;
- return 0;
-}
-
-static inline void free_dma(unsigned int dmanr)
-{
- if (dmanr >= PARPORT_PC_MAX_PORTS) {
- printk(KERN_WARNING "Trying to free DMA%d\n", dmanr);
- return;
- }
- if (xchg(&sparc_ebus_dmas[dmanr].lock, 0) == 0) {
- printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr);
- return;
- }
-}
-
-static inline void enable_dma(unsigned int dmanr)
-{
- ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 1);
-
- if (ebus_dma_request(&sparc_ebus_dmas[dmanr].info,
- sparc_ebus_dmas[dmanr].addr,
- sparc_ebus_dmas[dmanr].count))
- BUG();
-}
-
-static inline void disable_dma(unsigned int dmanr)
-{
- ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 0);
-}
-
-static inline void clear_dma_ff(unsigned int dmanr)
-{
- /* nothing */
-}
-
-static inline void set_dma_mode(unsigned int dmanr, char mode)
-{
- ebus_dma_prepare(&sparc_ebus_dmas[dmanr].info, (mode != DMA_MODE_WRITE));
-}
-
-static inline void set_dma_addr(unsigned int dmanr, unsigned int addr)
-{
- sparc_ebus_dmas[dmanr].addr = addr;
-}
-
-static inline void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- sparc_ebus_dmas[dmanr].count = count;
-}
-
-static inline unsigned int get_dma_residue(unsigned int dmanr)
-{
- return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info);
-}
-
-static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id *match)
-{
- unsigned long base = op->resource[0].start;
- unsigned long config = op->resource[1].start;
- unsigned long d_base = op->resource[2].start;
- unsigned long d_len;
- struct device_node *parent;
- struct parport *p;
- int slot, err;
-
- parent = op->node->parent;
- if (!strcmp(parent->name, "dma")) {
- p = parport_pc_probe_port(base, base + 0x400,
- op->irqs[0], PARPORT_DMA_NOFIFO,
- op->dev.parent->parent);
- if (!p)
- return -ENOMEM;
- dev_set_drvdata(&op->dev, p);
- return 0;
- }
-
- for (slot = 0; slot < PARPORT_PC_MAX_PORTS; slot++) {
- if (!test_and_set_bit(slot, dma_slot_map))
- break;
- }
- err = -ENODEV;
- if (slot >= PARPORT_PC_MAX_PORTS)
- goto out_err;
-
- spin_lock_init(&sparc_ebus_dmas[slot].info.lock);
-
- d_len = (op->resource[2].end - d_base) + 1UL;
- sparc_ebus_dmas[slot].info.regs =
- of_ioremap(&op->resource[2], 0, d_len, "ECPP DMA");
-
- if (!sparc_ebus_dmas[slot].info.regs)
- goto out_clear_map;
-
- sparc_ebus_dmas[slot].info.flags = 0;
- sparc_ebus_dmas[slot].info.callback = NULL;
- sparc_ebus_dmas[slot].info.client_cookie = NULL;
- sparc_ebus_dmas[slot].info.irq = 0xdeadbeef;
- strcpy(sparc_ebus_dmas[slot].info.name, "parport");
- if (ebus_dma_register(&sparc_ebus_dmas[slot].info))
- goto out_unmap_regs;
-
- ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 1);
-
- /* Configure IRQ to Push Pull, Level Low */
- /* Enable ECP, set bit 2 of the CTR first */
- outb(0x04, base + 0x02);
- ns87303_modify(config, PCR,
- PCR_EPP_ENABLE |
- PCR_IRQ_ODRAIN,
- PCR_ECP_ENABLE |
- PCR_ECP_CLK_ENA |
- PCR_IRQ_POLAR);
-
- /* CTR bit 5 controls direction of port */
- ns87303_modify(config, PTR,
- 0, PTR_LPT_REG_DIR);
-
- p = parport_pc_probe_port(base, base + 0x400,
- op->irqs[0],
- slot,
- op->dev.parent);
- err = -ENOMEM;
- if (!p)
- goto out_disable_irq;
-
- dev_set_drvdata(&op->dev, p);
-
- return 0;
-
-out_disable_irq:
- ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
- ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
-
-out_unmap_regs:
- of_iounmap(&op->resource[2], sparc_ebus_dmas[slot].info.regs, d_len);
-
-out_clear_map:
- clear_bit(slot, dma_slot_map);
-
-out_err:
- return err;
-}
-
-static int __devexit ecpp_remove(struct of_device *op)
-{
- struct parport *p = dev_get_drvdata(&op->dev);
- int slot = p->dma;
-
- parport_pc_unregister_port(p);
-
- if (slot != PARPORT_DMA_NOFIFO) {
- unsigned long d_base = op->resource[2].start;
- unsigned long d_len;
-
- d_len = (op->resource[2].end - d_base) + 1UL;
-
- ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
- ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
- of_iounmap(&op->resource[2],
- sparc_ebus_dmas[slot].info.regs,
- d_len);
- clear_bit(slot, dma_slot_map);
- }
-
- return 0;
-}
-
-static struct of_device_id ecpp_match[] = {
- {
- .name = "ecpp",
- },
- {
- .name = "parallel",
- .compatible = "ecpp",
- },
- {
- .name = "parallel",
- .compatible = "ns87317-ecpp",
- },
- {},
-};
-
-static struct of_platform_driver ecpp_driver = {
- .name = "ecpp",
- .match_table = ecpp_match,
- .probe = ecpp_probe,
- .remove = __devexit_p(ecpp_remove),
-};
-
-static int parport_pc_find_nonpci_ports(int autoirq, int autodma)
-{
- of_register_driver(&ecpp_driver, &of_bus_type);
-
- return 0;
-}
-
-#endif /* !(_ASM_SPARC64_PARPORT_H */
+#include <asm-sparc/parport.h>
diff --git a/include/asm-sparc64/pil.h b/include/asm-sparc64/pil.h
index eaac842d88c..d805f33f1e0 100644
--- a/include/asm-sparc64/pil.h
+++ b/include/asm-sparc64/pil.h
@@ -1,21 +1 @@
-#ifndef _SPARC64_PIL_H
-#define _SPARC64_PIL_H
-
-/* To avoid some locking problems, we hard allocate certain PILs
- * for SMP cross call messages that must do a etrap/rtrap.
- *
- * A local_irq_disable() does not block the cross call delivery, so
- * when SMP locking is an issue we reschedule the event into a PIL
- * interrupt which is blocked by local_irq_disable().
- *
- * In fact any XCALL which has to etrap/rtrap has a problem because
- * it is difficult to prevent rtrap from running BH's, and that would
- * need to be done if the XCALL arrived while %pil==15.
- */
-#define PIL_SMP_CALL_FUNC 1
-#define PIL_SMP_RECEIVE_SIGNAL 2
-#define PIL_SMP_CAPTURE 3
-#define PIL_SMP_CTX_NEW_VERSION 4
-#define PIL_DEVICE_IRQ 5
-
-#endif /* !(_SPARC64_PIL_H) */
+#include <asm-sparc/pil.h>
diff --git a/include/asm-sparc64/reboot.h b/include/asm-sparc64/reboot.h
index 3f3f43f5be5..0d72eb811cc 100644
--- a/include/asm-sparc64/reboot.h
+++ b/include/asm-sparc64/reboot.h
@@ -1,6 +1 @@
-#ifndef _SPARC64_REBOOT_H
-#define _SPARC64_REBOOT_H
-
-extern void machine_alt_power_off(void);
-
-#endif /* _SPARC64_REBOOT_H */
+#include <asm-sparc/reboot.h>
diff --git a/include/asm-sparc64/rwsem-const.h b/include/asm-sparc64/rwsem-const.h
index a303c9d64d8..2a1de315c86 100644
--- a/include/asm-sparc64/rwsem-const.h
+++ b/include/asm-sparc64/rwsem-const.h
@@ -1,12 +1 @@
-/* rwsem-const.h: RW semaphore counter constants. */
-#ifndef _SPARC64_RWSEM_CONST_H
-#define _SPARC64_RWSEM_CONST_H
-
-#define RWSEM_UNLOCKED_VALUE 0x00000000
-#define RWSEM_ACTIVE_BIAS 0x00000001
-#define RWSEM_ACTIVE_MASK 0x0000ffff
-#define RWSEM_WAITING_BIAS 0xffff0000
-#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-
-#endif /* _SPARC64_RWSEM_CONST_H */
+#include <asm-sparc/rwsem-const.h>
diff --git a/include/asm-sparc64/rwsem.h b/include/asm-sparc64/rwsem.h
index 1dc129ac2fe..6943c56ed08 100644
--- a/include/asm-sparc64/rwsem.h
+++ b/include/asm-sparc64/rwsem.h
@@ -1,84 +1 @@
-/*
- * rwsem.h: R/W semaphores implemented using CAS
- *
- * Written by David S. Miller (davem@redhat.com), 2001.
- * Derived from asm-i386/rwsem.h
- */
-#ifndef _SPARC64_RWSEM_H
-#define _SPARC64_RWSEM_H
-
-#ifndef _LINUX_RWSEM_H
-#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
-#endif
-
-#ifdef __KERNEL__
-
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <asm/rwsem-const.h>
-
-struct rwsem_waiter;
-
-struct rw_semaphore {
- signed int count;
- spinlock_t wait_lock;
- struct list_head wait_list;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
- struct lockdep_map dep_map;
-#endif
-};
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
-#else
-# define __RWSEM_DEP_MAP_INIT(lockname)
-#endif
-
-#define __RWSEM_INITIALIZER(name) \
-{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \
- __RWSEM_DEP_MAP_INIT(name) }
-
-#define DECLARE_RWSEM(name) \
- struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-
-extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
- struct lock_class_key *key);
-
-#define init_rwsem(sem) \
-do { \
- static struct lock_class_key __key; \
- \
- __init_rwsem((sem), #sem, &__key); \
-} while (0)
-
-extern void __down_read(struct rw_semaphore *sem);
-extern int __down_read_trylock(struct rw_semaphore *sem);
-extern void __down_write(struct rw_semaphore *sem);
-extern int __down_write_trylock(struct rw_semaphore *sem);
-extern void __up_read(struct rw_semaphore *sem);
-extern void __up_write(struct rw_semaphore *sem);
-extern void __downgrade_write(struct rw_semaphore *sem);
-
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
-{
- __down_write(sem);
-}
-
-static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
-{
- return atomic_add_return(delta, (atomic_t *)(&sem->count));
-}
-
-static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
-{
- atomic_add(delta, (atomic_t *)(&sem->count));
-}
-
-static inline int rwsem_is_locked(struct rw_semaphore *sem)
-{
- return (sem->count != 0);
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _SPARC64_RWSEM_H */
+#include <asm-sparc/rwsem.h>
diff --git a/include/asm-sparc64/scratchpad.h b/include/asm-sparc64/scratchpad.h
index 5e8b01fb334..23675f6a915 100644
--- a/include/asm-sparc64/scratchpad.h
+++ b/include/asm-sparc64/scratchpad.h
@@ -1,14 +1 @@
-#ifndef _SPARC64_SCRATCHPAD_H
-#define _SPARC64_SCRATCHPAD_H
-
-/* Sun4v scratchpad registers, accessed via ASI_SCRATCHPAD. */
-
-#define SCRATCHPAD_MMU_MISS 0x00 /* Shared with OBP - set by OBP */
-#define SCRATCHPAD_CPUID 0x08 /* Shared with OBP - set by hypervisor */
-#define SCRATCHPAD_UTSBREG1 0x10
-#define SCRATCHPAD_UTSBREG2 0x18
- /* 0x20 and 0x28, hypervisor only... */
-#define SCRATCHPAD_UNUSED1 0x30
-#define SCRATCHPAD_UNUSED2 0x38 /* Reserved for OBP */
-
-#endif /* !(_SPARC64_SCRATCHPAD_H) */
+#include <asm-sparc/scratchpad.h>
diff --git a/include/asm-sparc64/seccomp.h b/include/asm-sparc64/seccomp.h
index 7fcd9968192..f22f02a08a6 100644
--- a/include/asm-sparc64/seccomp.h
+++ b/include/asm-sparc64/seccomp.h
@@ -1,21 +1 @@
-#ifndef _ASM_SECCOMP_H
-
-#include <linux/thread_info.h> /* already defines TIF_32BIT */
-
-#ifndef TIF_32BIT
-#error "unexpected TIF_32BIT on sparc64"
-#endif
-
-#include <linux/unistd.h>
-
-#define __NR_seccomp_read __NR_read
-#define __NR_seccomp_write __NR_write
-#define __NR_seccomp_exit __NR_exit
-#define __NR_seccomp_sigreturn __NR_rt_sigreturn
-
-#define __NR_seccomp_read_32 __NR_read
-#define __NR_seccomp_write_32 __NR_write
-#define __NR_seccomp_exit_32 __NR_exit
-#define __NR_seccomp_sigreturn_32 __NR_sigreturn
-
-#endif /* _ASM_SECCOMP_H */
+#include <asm-sparc/seccomp.h>
diff --git a/include/asm-sparc64/sfafsr.h b/include/asm-sparc64/sfafsr.h
index e96137b04a4..8036fc377a4 100644
--- a/include/asm-sparc64/sfafsr.h
+++ b/include/asm-sparc64/sfafsr.h
@@ -1,82 +1 @@
-#ifndef _SPARC64_SFAFSR_H
-#define _SPARC64_SFAFSR_H
-
-#include <linux/const.h>
-
-/* Spitfire Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */
-
-#define SFAFSR_ME (_AC(1,UL) << SFAFSR_ME_SHIFT)
-#define SFAFSR_ME_SHIFT 32
-#define SFAFSR_PRIV (_AC(1,UL) << SFAFSR_PRIV_SHIFT)
-#define SFAFSR_PRIV_SHIFT 31
-#define SFAFSR_ISAP (_AC(1,UL) << SFAFSR_ISAP_SHIFT)
-#define SFAFSR_ISAP_SHIFT 30
-#define SFAFSR_ETP (_AC(1,UL) << SFAFSR_ETP_SHIFT)
-#define SFAFSR_ETP_SHIFT 29
-#define SFAFSR_IVUE (_AC(1,UL) << SFAFSR_IVUE_SHIFT)
-#define SFAFSR_IVUE_SHIFT 28
-#define SFAFSR_TO (_AC(1,UL) << SFAFSR_TO_SHIFT)
-#define SFAFSR_TO_SHIFT 27
-#define SFAFSR_BERR (_AC(1,UL) << SFAFSR_BERR_SHIFT)
-#define SFAFSR_BERR_SHIFT 26
-#define SFAFSR_LDP (_AC(1,UL) << SFAFSR_LDP_SHIFT)
-#define SFAFSR_LDP_SHIFT 25
-#define SFAFSR_CP (_AC(1,UL) << SFAFSR_CP_SHIFT)
-#define SFAFSR_CP_SHIFT 24
-#define SFAFSR_WP (_AC(1,UL) << SFAFSR_WP_SHIFT)
-#define SFAFSR_WP_SHIFT 23
-#define SFAFSR_EDP (_AC(1,UL) << SFAFSR_EDP_SHIFT)
-#define SFAFSR_EDP_SHIFT 22
-#define SFAFSR_UE (_AC(1,UL) << SFAFSR_UE_SHIFT)
-#define SFAFSR_UE_SHIFT 21
-#define SFAFSR_CE (_AC(1,UL) << SFAFSR_CE_SHIFT)
-#define SFAFSR_CE_SHIFT 20
-#define SFAFSR_ETS (_AC(0xf,UL) << SFAFSR_ETS_SHIFT)
-#define SFAFSR_ETS_SHIFT 16
-#define SFAFSR_PSYND (_AC(0xffff,UL) << SFAFSR_PSYND_SHIFT)
-#define SFAFSR_PSYND_SHIFT 0
-
-/* UDB Error Register, ASI=0x7f VA<63:0>=0x0(High),0x18(Low) for read
- * ASI=0x77 VA<63:0>=0x0(High),0x18(Low) for write
- */
-
-#define UDBE_UE (_AC(1,UL) << 9)
-#define UDBE_CE (_AC(1,UL) << 8)
-#define UDBE_E_SYNDR (_AC(0xff,UL) << 0)
-
-/* The trap handlers for asynchronous errors encode the AFSR and
- * other pieces of information into a 64-bit argument for C code
- * encoded as follows:
- *
- * -----------------------------------------------
- * | UDB_H | UDB_L | TL>1 | TT | AFSR |
- * -----------------------------------------------
- * 63 54 53 44 42 41 33 32 0
- *
- * The AFAR is passed in unchanged.
- */
-#define SFSTAT_UDBH_MASK (_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT)
-#define SFSTAT_UDBH_SHIFT 54
-#define SFSTAT_UDBL_MASK (_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT)
-#define SFSTAT_UDBL_SHIFT 44
-#define SFSTAT_TL_GT_ONE (_AC(1,UL) << SFSTAT_TL_GT_ONE_SHIFT)
-#define SFSTAT_TL_GT_ONE_SHIFT 42
-#define SFSTAT_TRAP_TYPE (_AC(0x1FF,UL) << SFSTAT_TRAP_TYPE_SHIFT)
-#define SFSTAT_TRAP_TYPE_SHIFT 33
-#define SFSTAT_AFSR_MASK (_AC(0x1ffffffff,UL) << SFSTAT_AFSR_SHIFT)
-#define SFSTAT_AFSR_SHIFT 0
-
-/* ESTATE Error Enable Register, ASI=0x4b VA<63:0>=0x0 */
-#define ESTATE_ERR_CE 0x1 /* Correctable errors */
-#define ESTATE_ERR_NCE 0x2 /* TO, BERR, LDP, ETP, EDP, WP, UE, IVUE */
-#define ESTATE_ERR_ISAP 0x4 /* System address parity error */
-#define ESTATE_ERR_ALL (ESTATE_ERR_CE | \
- ESTATE_ERR_NCE | \
- ESTATE_ERR_ISAP)
-
-/* The various trap types that report using the above state. */
-#define TRAP_TYPE_IAE 0x09 /* Instruction Access Error */
-#define TRAP_TYPE_DAE 0x32 /* Data Access Error */
-#define TRAP_TYPE_CEE 0x63 /* Correctable ECC Error */
-
-#endif /* _SPARC64_SFAFSR_H */
+#include <asm-sparc/sfafsr.h>
diff --git a/include/asm-sparc64/sparsemem.h b/include/asm-sparc64/sparsemem.h
index b99d4e4b6d2..e681f22a97a 100644
--- a/include/asm-sparc64/sparsemem.h
+++ b/include/asm-sparc64/sparsemem.h
@@ -1,12 +1 @@
-#ifndef _SPARC64_SPARSEMEM_H
-#define _SPARC64_SPARSEMEM_H
-
-#ifdef __KERNEL__
-
-#define SECTION_SIZE_BITS 30
-#define MAX_PHYSADDR_BITS 42
-#define MAX_PHYSMEM_BITS 42
-
-#endif /* !(__KERNEL__) */
-
-#endif /* !(_SPARC64_SPARSEMEM_H) */
+#include <asm-sparc/sparsemem.h>
diff --git a/include/asm-sparc64/spitfire.h b/include/asm-sparc64/spitfire.h
index 985ea7e3199..4430d2fbb0d 100644
--- a/include/asm-sparc64/spitfire.h
+++ b/include/asm-sparc64/spitfire.h
@@ -1,342 +1 @@
-/* spitfire.h: SpitFire/BlackBird/Cheetah inline MMU operations.
- *
- * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
- */
-
-#ifndef _SPARC64_SPITFIRE_H
-#define _SPARC64_SPITFIRE_H
-
-#include <asm/asi.h>
-
-/* The following register addresses are accessible via ASI_DMMU
- * and ASI_IMMU, that is there is a distinct and unique copy of
- * each these registers for each TLB.
- */
-#define TSB_TAG_TARGET 0x0000000000000000 /* All chips */
-#define TLB_SFSR 0x0000000000000018 /* All chips */
-#define TSB_REG 0x0000000000000028 /* All chips */
-#define TLB_TAG_ACCESS 0x0000000000000030 /* All chips */
-#define VIRT_WATCHPOINT 0x0000000000000038 /* All chips */
-#define PHYS_WATCHPOINT 0x0000000000000040 /* All chips */
-#define TSB_EXTENSION_P 0x0000000000000048 /* Ultra-III and later */
-#define TSB_EXTENSION_S 0x0000000000000050 /* Ultra-III and later, D-TLB only */
-#define TSB_EXTENSION_N 0x0000000000000058 /* Ultra-III and later */
-#define TLB_TAG_ACCESS_EXT 0x0000000000000060 /* Ultra-III+ and later */
-
-/* These registers only exist as one entity, and are accessed
- * via ASI_DMMU only.
- */
-#define PRIMARY_CONTEXT 0x0000000000000008
-#define SECONDARY_CONTEXT 0x0000000000000010
-#define DMMU_SFAR 0x0000000000000020
-#define VIRT_WATCHPOINT 0x0000000000000038
-#define PHYS_WATCHPOINT 0x0000000000000040
-
-#define SPITFIRE_HIGHEST_LOCKED_TLBENT (64 - 1)
-#define CHEETAH_HIGHEST_LOCKED_TLBENT (16 - 1)
-
-#define L1DCACHE_SIZE 0x4000
-
-#define SUN4V_CHIP_INVALID 0x00
-#define SUN4V_CHIP_NIAGARA1 0x01
-#define SUN4V_CHIP_NIAGARA2 0x02
-#define SUN4V_CHIP_UNKNOWN 0xff
-
-#ifndef __ASSEMBLY__
-
-enum ultra_tlb_layout {
- spitfire = 0,
- cheetah = 1,
- cheetah_plus = 2,
- hypervisor = 3,
-};
-
-extern enum ultra_tlb_layout tlb_type;
-
-extern int sun4v_chip_type;
-
-extern int cheetah_pcache_forced_on;
-extern void cheetah_enable_pcache(void);
-
-#define sparc64_highest_locked_tlbent() \
- (tlb_type == spitfire ? \
- SPITFIRE_HIGHEST_LOCKED_TLBENT : \
- CHEETAH_HIGHEST_LOCKED_TLBENT)
-
-extern int num_kernel_image_mappings;
-
-/* The data cache is write through, so this just invalidates the
- * specified line.
- */
-static inline void spitfire_put_dcache_tag(unsigned long addr, unsigned long tag)
-{
- __asm__ __volatile__("stxa %0, [%1] %2\n\t"
- "membar #Sync"
- : /* No outputs */
- : "r" (tag), "r" (addr), "i" (ASI_DCACHE_TAG));
-}
-
-/* The instruction cache lines are flushed with this, but note that
- * this does not flush the pipeline. It is possible for a line to
- * get flushed but stale instructions to still be in the pipeline,
- * a flush instruction (to any address) is sufficient to handle
- * this issue after the line is invalidated.
- */
-static inline void spitfire_put_icache_tag(unsigned long addr, unsigned long tag)
-{
- __asm__ __volatile__("stxa %0, [%1] %2\n\t"
- "membar #Sync"
- : /* No outputs */
- : "r" (tag), "r" (addr), "i" (ASI_IC_TAG));
-}
-
-static inline unsigned long spitfire_get_dtlb_data(int entry)
-{
- unsigned long data;
-
- __asm__ __volatile__("ldxa [%1] %2, %0"
- : "=r" (data)
- : "r" (entry << 3), "i" (ASI_DTLB_DATA_ACCESS));
-
- /* Clear TTE diag bits. */
- data &= ~0x0003fe0000000000UL;
-
- return data;
-}
-
-static inline unsigned long spitfire_get_dtlb_tag(int entry)
-{
- unsigned long tag;
-
- __asm__ __volatile__("ldxa [%1] %2, %0"
- : "=r" (tag)
- : "r" (entry << 3), "i" (ASI_DTLB_TAG_READ));
- return tag;
-}
-
-static inline void spitfire_put_dtlb_data(int entry, unsigned long data)
-{
- __asm__ __volatile__("stxa %0, [%1] %2\n\t"
- "membar #Sync"
- : /* No outputs */
- : "r" (data), "r" (entry << 3),
- "i" (ASI_DTLB_DATA_ACCESS));
-}
-
-static inline unsigned long spitfire_get_itlb_data(int entry)
-{
- unsigned long data;
-
- __asm__ __volatile__("ldxa [%1] %2, %0"
- : "=r" (data)
- : "r" (entry << 3), "i" (ASI_ITLB_DATA_ACCESS));
-
- /* Clear TTE diag bits. */
- data &= ~0x0003fe0000000000UL;
-
- return data;
-}
-
-static inline unsigned long spitfire_get_itlb_tag(int entry)
-{
- unsigned long tag;
-
- __asm__ __volatile__("ldxa [%1] %2, %0"
- : "=r" (tag)
- : "r" (entry << 3), "i" (ASI_ITLB_TAG_READ));
- return tag;
-}
-
-static inline void spitfire_put_itlb_data(int entry, unsigned long data)
-{
- __asm__ __volatile__("stxa %0, [%1] %2\n\t"
- "membar #Sync"
- : /* No outputs */
- : "r" (data), "r" (entry << 3),
- "i" (ASI_ITLB_DATA_ACCESS));
-}
-
-static inline void spitfire_flush_dtlb_nucleus_page(unsigned long page)
-{
- __asm__ __volatile__("stxa %%g0, [%0] %1\n\t"
- "membar #Sync"
- : /* No outputs */
- : "r" (page | 0x20), "i" (ASI_DMMU_DEMAP));
-}
-
-static inline void spitfire_flush_itlb_nucleus_page(unsigned long page)
-{
- __asm__ __volatile__("stxa %%g0, [%0] %1\n\t"
- "membar #Sync"
- : /* No outputs */
- : "r" (page | 0x20), "i" (ASI_IMMU_DEMAP));
-}
-
-/* Cheetah has "all non-locked" tlb flushes. */
-static inline void cheetah_flush_dtlb_all(void)
-{
- __asm__ __volatile__("stxa %%g0, [%0] %1\n\t"
- "membar #Sync"
- : /* No outputs */
- : "r" (0x80), "i" (ASI_DMMU_DEMAP));
-}
-
-static inline void cheetah_flush_itlb_all(void)
-{
- __asm__ __volatile__("stxa %%g0, [%0] %1\n\t"
- "membar #Sync"
- : /* No outputs */
- : "r" (0x80), "i" (ASI_IMMU_DEMAP));
-}
-
-/* Cheetah has a 4-tlb layout so direct access is a bit different.
- * The first two TLBs are fully assosciative, hold 16 entries, and are
- * used only for locked and >8K sized translations. One exists for
- * data accesses and one for instruction accesses.
- *
- * The third TLB is for data accesses to 8K non-locked translations, is
- * 2 way assosciative, and holds 512 entries. The fourth TLB is for
- * instruction accesses to 8K non-locked translations, is 2 way
- * assosciative, and holds 128 entries.
- *
- * Cheetah has some bug where bogus data can be returned from
- * ASI_{D,I}TLB_DATA_ACCESS loads, doing the load twice fixes
- * the problem for me. -DaveM
- */
-static inline unsigned long cheetah_get_ldtlb_data(int entry)
-{
- unsigned long data;
-
- __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t"
- "ldxa [%1] %2, %0"
- : "=r" (data)
- : "r" ((0 << 16) | (entry << 3)),
- "i" (ASI_DTLB_DATA_ACCESS));
-
- return data;
-}
-
-static inline unsigned long cheetah_get_litlb_data(int entry)
-{
- unsigned long data;
-
- __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t"
- "ldxa [%1] %2, %0"
- : "=r" (data)
- : "r" ((0 << 16) | (entry << 3)),
- "i" (ASI_ITLB_DATA_ACCESS));
-
- return data;
-}
-
-static inline unsigned long cheetah_get_ldtlb_tag(int entry)
-{
- unsigned long tag;
-
- __asm__ __volatile__("ldxa [%1] %2, %0"
- : "=r" (tag)
- : "r" ((0 << 16) | (entry << 3)),
- "i" (ASI_DTLB_TAG_READ));
-
- return tag;
-}
-
-static inline unsigned long cheetah_get_litlb_tag(int entry)
-{
- unsigned long tag;
-
- __asm__ __volatile__("ldxa [%1] %2, %0"
- : "=r" (tag)
- : "r" ((0 << 16) | (entry << 3)),
- "i" (ASI_ITLB_TAG_READ));
-
- return tag;
-}
-
-static inline void cheetah_put_ldtlb_data(int entry, unsigned long data)
-{
- __asm__ __volatile__("stxa %0, [%1] %2\n\t"
- "membar #Sync"
- : /* No outputs */
- : "r" (data),
- "r" ((0 << 16) | (entry << 3)),
- "i" (ASI_DTLB_DATA_ACCESS));
-}
-
-static inline void cheetah_put_litlb_data(int entry, unsigned long data)
-{
- __asm__ __volatile__("stxa %0, [%1] %2\n\t"
- "membar #Sync"
- : /* No outputs */
- : "r" (data),
- "r" ((0 << 16) | (entry << 3)),
- "i" (ASI_ITLB_DATA_ACCESS));
-}
-
-static inline unsigned long cheetah_get_dtlb_data(int entry, int tlb)
-{
- unsigned long data;
-
- __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t"
- "ldxa [%1] %2, %0"
- : "=r" (data)
- : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_DATA_ACCESS));
-
- return data;
-}
-
-static inline unsigned long cheetah_get_dtlb_tag(int entry, int tlb)
-{
- unsigned long tag;
-
- __asm__ __volatile__("ldxa [%1] %2, %0"
- : "=r" (tag)
- : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_TAG_READ));
- return tag;
-}
-
-static inline void cheetah_put_dtlb_data(int entry, unsigned long data, int tlb)
-{
- __asm__ __volatile__("stxa %0, [%1] %2\n\t"
- "membar #Sync"
- : /* No outputs */
- : "r" (data),
- "r" ((tlb << 16) | (entry << 3)),
- "i" (ASI_DTLB_DATA_ACCESS));
-}
-
-static inline unsigned long cheetah_get_itlb_data(int entry)
-{
- unsigned long data;
-
- __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t"
- "ldxa [%1] %2, %0"
- : "=r" (data)
- : "r" ((2 << 16) | (entry << 3)),
- "i" (ASI_ITLB_DATA_ACCESS));
-
- return data;
-}
-
-static inline unsigned long cheetah_get_itlb_tag(int entry)
-{
- unsigned long tag;
-
- __asm__ __volatile__("ldxa [%1] %2, %0"
- : "=r" (tag)
- : "r" ((2 << 16) | (entry << 3)), "i" (ASI_ITLB_TAG_READ));
- return tag;
-}
-
-static inline void cheetah_put_itlb_data(int entry, unsigned long data)
-{
- __asm__ __volatile__("stxa %0, [%1] %2\n\t"
- "membar #Sync"
- : /* No outputs */
- : "r" (data), "r" ((2 << 16) | (entry << 3)),
- "i" (ASI_ITLB_DATA_ACCESS));
-}
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC64_SPITFIRE_H) */
+#include <asm-sparc/spitfire.h>
diff --git a/include/asm-sparc64/sstate.h b/include/asm-sparc64/sstate.h
index a7c35dbcb28..97720ce2fd4 100644
--- a/include/asm-sparc64/sstate.h
+++ b/include/asm-sparc64/sstate.h
@@ -1,13 +1 @@
-#ifndef _SPARC64_SSTATE_H
-#define _SPARC64_SSTATE_H
-
-extern void sstate_booting(void);
-extern void sstate_running(void);
-extern void sstate_halt(void);
-extern void sstate_poweroff(void);
-extern void sstate_panic(void);
-extern void sstate_reboot(void);
-
-extern void sun4v_sstate_init(void);
-
-#endif /* _SPARC64_SSTATE_H */
+#include <asm-sparc/sstate.h>
diff --git a/include/asm-sparc64/stacktrace.h b/include/asm-sparc64/stacktrace.h
index 6cee39adf6d..adc9b92c0ef 100644
--- a/include/asm-sparc64/stacktrace.h
+++ b/include/asm-sparc64/stacktrace.h
@@ -1,6 +1 @@
-#ifndef _SPARC64_STACKTRACE_H
-#define _SPARC64_STACKTRACE_H
-
-extern void stack_trace_flush(void);
-
-#endif /* _SPARC64_STACKTRACE_H */
+#include <asm-sparc/stacktrace.h>
diff --git a/include/asm-sparc64/starfire.h b/include/asm-sparc64/starfire.h
index 07bafd31e33..db97daa3bed 100644
--- a/include/asm-sparc64/starfire.h
+++ b/include/asm-sparc64/starfire.h
@@ -1,21 +1 @@
-/*
- * starfire.h: Group all starfire specific code together.
- *
- * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
- */
-
-#ifndef _SPARC64_STARFIRE_H
-#define _SPARC64_STARFIRE_H
-
-#ifndef __ASSEMBLY__
-
-extern int this_is_starfire;
-
-extern void check_if_starfire(void);
-extern void starfire_cpu_setup(void);
-extern int starfire_hard_smp_processor_id(void);
-extern void starfire_hookup(int);
-extern unsigned int starfire_translate(unsigned long imap, unsigned int upaid);
-
-#endif
-#endif
+#include <asm-sparc/starfire.h>
diff --git a/include/asm-sparc64/syscalls.h b/include/asm-sparc64/syscalls.h
index 45a43f637a1..3477b16e30c 100644
--- a/include/asm-sparc64/syscalls.h
+++ b/include/asm-sparc64/syscalls.h
@@ -1,13 +1 @@
-#ifndef _SPARC64_SYSCALLS_H
-#define _SPARC64_SYSCALLS_H
-
-struct pt_regs;
-
-extern asmlinkage long sparc_do_fork(unsigned long clone_flags,
- unsigned long stack_start,
- struct pt_regs *regs,
- unsigned long stack_size);
-
-extern asmlinkage int sparc_execve(struct pt_regs *regs);
-
-#endif /* _SPARC64_SYSCALLS_H */
+#include <asm-sparc/syscalls.h>
diff --git a/include/asm-sparc64/tsb.h b/include/asm-sparc64/tsb.h
index 76e4299dd9b..3677a302ea3 100644
--- a/include/asm-sparc64/tsb.h
+++ b/include/asm-sparc64/tsb.h
@@ -1,283 +1 @@
-#ifndef _SPARC64_TSB_H
-#define _SPARC64_TSB_H
-
-/* The sparc64 TSB is similar to the powerpc hashtables. It's a
- * power-of-2 sized table of TAG/PTE pairs. The cpu precomputes
- * pointers into this table for 8K and 64K page sizes, and also a
- * comparison TAG based upon the virtual address and context which
- * faults.
- *
- * TLB miss trap handler software does the actual lookup via something
- * of the form:
- *
- * ldxa [%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1
- * ldxa [%g0] ASI_{D,I}MMU, %g6
- * sllx %g6, 22, %g6
- * srlx %g6, 22, %g6
- * ldda [%g1] ASI_NUCLEUS_QUAD_LDD, %g4
- * cmp %g4, %g6
- * bne,pn %xcc, tsb_miss_{d,i}tlb
- * mov FAULT_CODE_{D,I}TLB, %g3
- * stxa %g5, [%g0] ASI_{D,I}TLB_DATA_IN
- * retry
- *
- *
- * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte
- * PTE. The TAG is of the same layout as the TLB TAG TARGET mmu
- * register which is:
- *
- * -------------------------------------------------
- * | - | CONTEXT | - | VADDR bits 63:22 |
- * -------------------------------------------------
- * 63 61 60 48 47 42 41 0
- *
- * But actually, since we use per-mm TSB's, we zero out the CONTEXT
- * field.
- *
- * Like the powerpc hashtables we need to use locking in order to
- * synchronize while we update the entries. PTE updates need locking
- * as well.
- *
- * We need to carefully choose a lock bits for the TSB entry. We
- * choose to use bit 47 in the tag. Also, since we never map anything
- * at page zero in context zero, we use zero as an invalid tag entry.
- * When the lock bit is set, this forces a tag comparison failure.
- */
-
-#define TSB_TAG_LOCK_BIT 47
-#define TSB_TAG_LOCK_HIGH (1 << (TSB_TAG_LOCK_BIT - 32))
-
-#define TSB_TAG_INVALID_BIT 46
-#define TSB_TAG_INVALID_HIGH (1 << (TSB_TAG_INVALID_BIT - 32))
-
-#define TSB_MEMBAR membar #StoreStore
-
-/* Some cpus support physical address quad loads. We want to use
- * those if possible so we don't need to hard-lock the TSB mapping
- * into the TLB. We encode some instruction patching in order to
- * support this.
- *
- * The kernel TSB is locked into the TLB by virtue of being in the
- * kernel image, so we don't play these games for swapper_tsb access.
- */
-#ifndef __ASSEMBLY__
-struct tsb_ldquad_phys_patch_entry {
- unsigned int addr;
- unsigned int sun4u_insn;
- unsigned int sun4v_insn;
-};
-extern struct tsb_ldquad_phys_patch_entry __tsb_ldquad_phys_patch,
- __tsb_ldquad_phys_patch_end;
-
-struct tsb_phys_patch_entry {
- unsigned int addr;
- unsigned int insn;
-};
-extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end;
-#endif
-#define TSB_LOAD_QUAD(TSB, REG) \
-661: ldda [TSB] ASI_NUCLEUS_QUAD_LDD, REG; \
- .section .tsb_ldquad_phys_patch, "ax"; \
- .word 661b; \
- ldda [TSB] ASI_QUAD_LDD_PHYS, REG; \
- ldda [TSB] ASI_QUAD_LDD_PHYS_4V, REG; \
- .previous
-
-#define TSB_LOAD_TAG_HIGH(TSB, REG) \
-661: lduwa [TSB] ASI_N, REG; \
- .section .tsb_phys_patch, "ax"; \
- .word 661b; \
- lduwa [TSB] ASI_PHYS_USE_EC, REG; \
- .previous
-
-#define TSB_LOAD_TAG(TSB, REG) \
-661: ldxa [TSB] ASI_N, REG; \
- .section .tsb_phys_patch, "ax"; \
- .word 661b; \
- ldxa [TSB] ASI_PHYS_USE_EC, REG; \
- .previous
-
-#define TSB_CAS_TAG_HIGH(TSB, REG1, REG2) \
-661: casa [TSB] ASI_N, REG1, REG2; \
- .section .tsb_phys_patch, "ax"; \
- .word 661b; \
- casa [TSB] ASI_PHYS_USE_EC, REG1, REG2; \
- .previous
-
-#define TSB_CAS_TAG(TSB, REG1, REG2) \
-661: casxa [TSB] ASI_N, REG1, REG2; \
- .section .tsb_phys_patch, "ax"; \
- .word 661b; \
- casxa [TSB] ASI_PHYS_USE_EC, REG1, REG2; \
- .previous
-
-#define TSB_STORE(ADDR, VAL) \
-661: stxa VAL, [ADDR] ASI_N; \
- .section .tsb_phys_patch, "ax"; \
- .word 661b; \
- stxa VAL, [ADDR] ASI_PHYS_USE_EC; \
- .previous
-
-#define TSB_LOCK_TAG(TSB, REG1, REG2) \
-99: TSB_LOAD_TAG_HIGH(TSB, REG1); \
- sethi %hi(TSB_TAG_LOCK_HIGH), REG2;\
- andcc REG1, REG2, %g0; \
- bne,pn %icc, 99b; \
- nop; \
- TSB_CAS_TAG_HIGH(TSB, REG1, REG2); \
- cmp REG1, REG2; \
- bne,pn %icc, 99b; \
- nop; \
- TSB_MEMBAR
-
-#define TSB_WRITE(TSB, TTE, TAG) \
- add TSB, 0x8, TSB; \
- TSB_STORE(TSB, TTE); \
- sub TSB, 0x8, TSB; \
- TSB_MEMBAR; \
- TSB_STORE(TSB, TAG);
-
-#define KTSB_LOAD_QUAD(TSB, REG) \
- ldda [TSB] ASI_NUCLEUS_QUAD_LDD, REG;
-
-#define KTSB_STORE(ADDR, VAL) \
- stxa VAL, [ADDR] ASI_N;
-
-#define KTSB_LOCK_TAG(TSB, REG1, REG2) \
-99: lduwa [TSB] ASI_N, REG1; \
- sethi %hi(TSB_TAG_LOCK_HIGH), REG2;\
- andcc REG1, REG2, %g0; \
- bne,pn %icc, 99b; \
- nop; \
- casa [TSB] ASI_N, REG1, REG2;\
- cmp REG1, REG2; \
- bne,pn %icc, 99b; \
- nop; \
- TSB_MEMBAR
-
-#define KTSB_WRITE(TSB, TTE, TAG) \
- add TSB, 0x8, TSB; \
- stxa TTE, [TSB] ASI_N; \
- sub TSB, 0x8, TSB; \
- TSB_MEMBAR; \
- stxa TAG, [TSB] ASI_N;
-
- /* Do a kernel page table walk. Leaves physical PTE pointer in
- * REG1. Jumps to FAIL_LABEL on early page table walk termination.
- * VADDR will not be clobbered, but REG2 will.
- */
-#define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL) \
- sethi %hi(swapper_pg_dir), REG1; \
- or REG1, %lo(swapper_pg_dir), REG1; \
- sllx VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
- srlx REG2, 64 - PAGE_SHIFT, REG2; \
- andn REG2, 0x3, REG2; \
- lduw [REG1 + REG2], REG1; \
- brz,pn REG1, FAIL_LABEL; \
- sllx VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
- srlx REG2, 64 - PAGE_SHIFT, REG2; \
- sllx REG1, 11, REG1; \
- andn REG2, 0x3, REG2; \
- lduwa [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
- brz,pn REG1, FAIL_LABEL; \
- sllx VADDR, 64 - PMD_SHIFT, REG2; \
- srlx REG2, 64 - PAGE_SHIFT, REG2; \
- sllx REG1, 11, REG1; \
- andn REG2, 0x7, REG2; \
- add REG1, REG2, REG1;
-
- /* Do a user page table walk in MMU globals. Leaves physical PTE
- * pointer in REG1. Jumps to FAIL_LABEL on early page table walk
- * termination. Physical base of page tables is in PHYS_PGD which
- * will not be modified.
- *
- * VADDR will not be clobbered, but REG1 and REG2 will.
- */
-#define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL) \
- sllx VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
- srlx REG2, 64 - PAGE_SHIFT, REG2; \
- andn REG2, 0x3, REG2; \
- lduwa [PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \
- brz,pn REG1, FAIL_LABEL; \
- sllx VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
- srlx REG2, 64 - PAGE_SHIFT, REG2; \
- sllx REG1, 11, REG1; \
- andn REG2, 0x3, REG2; \
- lduwa [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
- brz,pn REG1, FAIL_LABEL; \
- sllx VADDR, 64 - PMD_SHIFT, REG2; \
- srlx REG2, 64 - PAGE_SHIFT, REG2; \
- sllx REG1, 11, REG1; \
- andn REG2, 0x7, REG2; \
- add REG1, REG2, REG1;
-
-/* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0.
- * If no entry is found, FAIL_LABEL will be branched to. On success
- * the resulting PTE value will be left in REG1. VADDR is preserved
- * by this routine.
- */
-#define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \
- sethi %hi(prom_trans), REG1; \
- or REG1, %lo(prom_trans), REG1; \
-97: ldx [REG1 + 0x00], REG2; \
- brz,pn REG2, FAIL_LABEL; \
- nop; \
- ldx [REG1 + 0x08], REG3; \
- add REG2, REG3, REG3; \
- cmp REG2, VADDR; \
- bgu,pt %xcc, 98f; \
- cmp VADDR, REG3; \
- bgeu,pt %xcc, 98f; \
- ldx [REG1 + 0x10], REG3; \
- sub VADDR, REG2, REG2; \
- ba,pt %xcc, 99f; \
- add REG3, REG2, REG1; \
-98: ba,pt %xcc, 97b; \
- add REG1, (3 * 8), REG1; \
-99:
-
- /* We use a 32K TSB for the whole kernel, this allows to
- * handle about 16MB of modules and vmalloc mappings without
- * incurring many hash conflicts.
- */
-#define KERNEL_TSB_SIZE_BYTES (32 * 1024)
-#define KERNEL_TSB_NENTRIES \
- (KERNEL_TSB_SIZE_BYTES / 16)
-#define KERNEL_TSB4M_NENTRIES 4096
-
- /* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL
- * on TSB hit. REG1, REG2, REG3, and REG4 are used as temporaries
- * and the found TTE will be left in REG1. REG3 and REG4 must
- * be an even/odd pair of registers.
- *
- * VADDR and TAG will be preserved and not clobbered by this macro.
- */
-#define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
- sethi %hi(swapper_tsb), REG1; \
- or REG1, %lo(swapper_tsb), REG1; \
- srlx VADDR, PAGE_SHIFT, REG2; \
- and REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \
- sllx REG2, 4, REG2; \
- add REG1, REG2, REG2; \
- KTSB_LOAD_QUAD(REG2, REG3); \
- cmp REG3, TAG; \
- be,a,pt %xcc, OK_LABEL; \
- mov REG4, REG1;
-
-#ifndef CONFIG_DEBUG_PAGEALLOC
- /* This version uses a trick, the TAG is already (VADDR >> 22) so
- * we can make use of that for the index computation.
- */
-#define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
- sethi %hi(swapper_4m_tsb), REG1; \
- or REG1, %lo(swapper_4m_tsb), REG1; \
- and TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \
- sllx REG2, 4, REG2; \
- add REG1, REG2, REG2; \
- KTSB_LOAD_QUAD(REG2, REG3); \
- cmp REG3, TAG; \
- be,a,pt %xcc, OK_LABEL; \
- mov REG4, REG1;
-#endif
-
-#endif /* !(_SPARC64_TSB_H) */
+#include <asm-sparc/tsb.h>
diff --git a/include/asm-sparc64/ttable.h b/include/asm-sparc64/ttable.h
index 0ba199587e0..a550f1bf6f9 100644
--- a/include/asm-sparc64/ttable.h
+++ b/include/asm-sparc64/ttable.h
@@ -1,658 +1 @@
-#ifndef _SPARC64_TTABLE_H
-#define _SPARC64_TTABLE_H
-
-#include <asm/utrap.h>
-
-#ifdef __ASSEMBLY__
-#include <asm/thread_info.h>
-#endif
-
-#define BOOT_KERNEL b sparc64_boot; nop; nop; nop; nop; nop; nop; nop;
-
-/* We need a "cleaned" instruction... */
-#define CLEAN_WINDOW \
- rdpr %cleanwin, %l0; add %l0, 1, %l0; \
- wrpr %l0, 0x0, %cleanwin; \
- clr %o0; clr %o1; clr %o2; clr %o3; \
- clr %o4; clr %o5; clr %o6; clr %o7; \
- clr %l0; clr %l1; clr %l2; clr %l3; \
- clr %l4; clr %l5; clr %l6; clr %l7; \
- retry; \
- nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;
-
-#define TRAP(routine) \
- sethi %hi(109f), %g7; \
- ba,pt %xcc, etrap; \
-109: or %g7, %lo(109b), %g7; \
- call routine; \
- add %sp, PTREGS_OFF, %o0; \
- ba,pt %xcc, rtrap; \
- nop; \
- nop;
-
-#define TRAP_7INSNS(routine) \
- sethi %hi(109f), %g7; \
- ba,pt %xcc, etrap; \
-109: or %g7, %lo(109b), %g7; \
- call routine; \
- add %sp, PTREGS_OFF, %o0; \
- ba,pt %xcc, rtrap; \
- nop;
-
-#define TRAP_SAVEFPU(routine) \
- sethi %hi(109f), %g7; \
- ba,pt %xcc, do_fptrap; \
-109: or %g7, %lo(109b), %g7; \
- call routine; \
- add %sp, PTREGS_OFF, %o0; \
- ba,pt %xcc, rtrap; \
- nop; \
- nop;
-
-#define TRAP_NOSAVE(routine) \
- ba,pt %xcc, routine; \
- nop; \
- nop; nop; nop; nop; nop; nop;
-
-#define TRAP_NOSAVE_7INSNS(routine) \
- ba,pt %xcc, routine; \
- nop; \
- nop; nop; nop; nop; nop;
-
-#define TRAPTL1(routine) \
- sethi %hi(109f), %g7; \
- ba,pt %xcc, etraptl1; \
-109: or %g7, %lo(109b), %g7; \
- call routine; \
- add %sp, PTREGS_OFF, %o0; \
- ba,pt %xcc, rtrap; \
- nop; \
- nop;
-
-#define TRAP_ARG(routine, arg) \
- sethi %hi(109f), %g7; \
- ba,pt %xcc, etrap; \
-109: or %g7, %lo(109b), %g7; \
- add %sp, PTREGS_OFF, %o0; \
- call routine; \
- mov arg, %o1; \
- ba,pt %xcc, rtrap; \
- nop;
-
-#define TRAPTL1_ARG(routine, arg) \
- sethi %hi(109f), %g7; \
- ba,pt %xcc, etraptl1; \
-109: or %g7, %lo(109b), %g7; \
- add %sp, PTREGS_OFF, %o0; \
- call routine; \
- mov arg, %o1; \
- ba,pt %xcc, rtrap; \
- nop;
-
-#define SYSCALL_TRAP(routine, systbl) \
- rdpr %pil, %g2; \
- mov TSTATE_SYSCALL, %g3; \
- sethi %hi(109f), %g7; \
- ba,pt %xcc, etrap_syscall; \
-109: or %g7, %lo(109b), %g7; \
- sethi %hi(systbl), %l7; \
- ba,pt %xcc, routine; \
- or %l7, %lo(systbl), %l7;
-
-#define TRAP_UTRAP(handler,lvl) \
- mov handler, %g3; \
- ba,pt %xcc, utrap_trap; \
- mov lvl, %g4; \
- nop; \
- nop; \
- nop; \
- nop; \
- nop;
-
-#ifdef CONFIG_COMPAT
-#define LINUX_32BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sys_call_table32)
-#else
-#define LINUX_32BIT_SYSCALL_TRAP BTRAP(0x110)
-#endif
-#define LINUX_64BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall, sys_call_table64)
-#define GETCC_TRAP TRAP(getcc)
-#define SETCC_TRAP TRAP(setcc)
-#define BREAKPOINT_TRAP TRAP(breakpoint_trap)
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-
-#define TRAP_IRQ(routine, level) \
- rdpr %pil, %g2; \
- wrpr %g0, 15, %pil; \
- sethi %hi(1f-4), %g7; \
- ba,pt %xcc, etrap_irq; \
- or %g7, %lo(1f-4), %g7; \
- nop; \
- nop; \
- nop; \
- .subsection 2; \
-1: call trace_hardirqs_off; \
- nop; \
- mov level, %o0; \
- call routine; \
- add %sp, PTREGS_OFF, %o1; \
- ba,a,pt %xcc, rtrap_irq; \
- .previous;
-
-#else
-
-#define TRAP_IRQ(routine, level) \
- rdpr %pil, %g2; \
- wrpr %g0, 15, %pil; \
- ba,pt %xcc, etrap_irq; \
- rd %pc, %g7; \
- mov level, %o0; \
- call routine; \
- add %sp, PTREGS_OFF, %o1; \
- ba,a,pt %xcc, rtrap_irq;
-
-#endif
-
-#define TRAP_IVEC TRAP_NOSAVE(do_ivec)
-
-#define BTRAP(lvl) TRAP_ARG(bad_trap, lvl)
-
-#define BTRAPTL1(lvl) TRAPTL1_ARG(bad_trap_tl1, lvl)
-
-#define FLUSH_WINDOW_TRAP \
- ba,pt %xcc, etrap; \
- rd %pc, %g7; \
- flushw; \
- ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %l1; \
- add %l1, 4, %l2; \
- stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC]; \
- ba,pt %xcc, rtrap; \
- stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC];
-
-#ifdef CONFIG_KPROBES
-#define KPROBES_TRAP(lvl) TRAP_IRQ(kprobe_trap, lvl)
-#else
-#define KPROBES_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
-#endif
-
-#ifdef CONFIG_KGDB
-#define KGDB_TRAP(lvl) TRAP_IRQ(kgdb_trap, lvl)
-#else
-#define KGDB_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
-#endif
-
-#define SUN4V_ITSB_MISS \
- ldxa [%g0] ASI_SCRATCHPAD, %g2; \
- ldx [%g2 + HV_FAULT_I_ADDR_OFFSET], %g4; \
- ldx [%g2 + HV_FAULT_I_CTX_OFFSET], %g5; \
- srlx %g4, 22, %g6; \
- ba,pt %xcc, sun4v_itsb_miss; \
- nop; \
- nop; \
- nop;
-
-#define SUN4V_DTSB_MISS \
- ldxa [%g0] ASI_SCRATCHPAD, %g2; \
- ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4; \
- ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5; \
- srlx %g4, 22, %g6; \
- ba,pt %xcc, sun4v_dtsb_miss; \
- nop; \
- nop; \
- nop;
-
-/* Before touching these macros, you owe it to yourself to go and
- * see how arch/sparc64/kernel/winfixup.S works... -DaveM
- *
- * For the user cases we used to use the %asi register, but
- * it turns out that the "wr xxx, %asi" costs ~5 cycles, so
- * now we use immediate ASI loads and stores instead. Kudos
- * to Greg Onufer for pointing out this performance anomaly.
- *
- * Further note that we cannot use the g2, g4, g5, and g7 alternate
- * globals in the spill routines, check out the save instruction in
- * arch/sparc64/kernel/etrap.S to see what I mean about g2, and
- * g4/g5 are the globals which are preserved by etrap processing
- * for the caller of it. The g7 register is the return pc for
- * etrap. Finally, g6 is the current thread register so we cannot
- * us it in the spill handlers either. Most of these rules do not
- * apply to fill processing, only g6 is not usable.
- */
-
-/* Normal kernel spill */
-#define SPILL_0_NORMAL \
- stx %l0, [%sp + STACK_BIAS + 0x00]; \
- stx %l1, [%sp + STACK_BIAS + 0x08]; \
- stx %l2, [%sp + STACK_BIAS + 0x10]; \
- stx %l3, [%sp + STACK_BIAS + 0x18]; \
- stx %l4, [%sp + STACK_BIAS + 0x20]; \
- stx %l5, [%sp + STACK_BIAS + 0x28]; \
- stx %l6, [%sp + STACK_BIAS + 0x30]; \
- stx %l7, [%sp + STACK_BIAS + 0x38]; \
- stx %i0, [%sp + STACK_BIAS + 0x40]; \
- stx %i1, [%sp + STACK_BIAS + 0x48]; \
- stx %i2, [%sp + STACK_BIAS + 0x50]; \
- stx %i3, [%sp + STACK_BIAS + 0x58]; \
- stx %i4, [%sp + STACK_BIAS + 0x60]; \
- stx %i5, [%sp + STACK_BIAS + 0x68]; \
- stx %i6, [%sp + STACK_BIAS + 0x70]; \
- stx %i7, [%sp + STACK_BIAS + 0x78]; \
- saved; retry; nop; nop; nop; nop; nop; nop; \
- nop; nop; nop; nop; nop; nop; nop; nop;
-
-#define SPILL_0_NORMAL_ETRAP \
-etrap_kernel_spill: \
- stx %l0, [%sp + STACK_BIAS + 0x00]; \
- stx %l1, [%sp + STACK_BIAS + 0x08]; \
- stx %l2, [%sp + STACK_BIAS + 0x10]; \
- stx %l3, [%sp + STACK_BIAS + 0x18]; \
- stx %l4, [%sp + STACK_BIAS + 0x20]; \
- stx %l5, [%sp + STACK_BIAS + 0x28]; \
- stx %l6, [%sp + STACK_BIAS + 0x30]; \
- stx %l7, [%sp + STACK_BIAS + 0x38]; \
- stx %i0, [%sp + STACK_BIAS + 0x40]; \
- stx %i1, [%sp + STACK_BIAS + 0x48]; \
- stx %i2, [%sp + STACK_BIAS + 0x50]; \
- stx %i3, [%sp + STACK_BIAS + 0x58]; \
- stx %i4, [%sp + STACK_BIAS + 0x60]; \
- stx %i5, [%sp + STACK_BIAS + 0x68]; \
- stx %i6, [%sp + STACK_BIAS + 0x70]; \
- stx %i7, [%sp + STACK_BIAS + 0x78]; \
- saved; \
- sub %g1, 2, %g1; \
- ba,pt %xcc, etrap_save; \
- wrpr %g1, %cwp; \
- nop; nop; nop; nop; nop; nop; nop; nop; \
- nop; nop; nop; nop;
-
-/* Normal 64bit spill */
-#define SPILL_1_GENERIC(ASI) \
- add %sp, STACK_BIAS + 0x00, %g1; \
- stxa %l0, [%g1 + %g0] ASI; \
- mov 0x08, %g3; \
- stxa %l1, [%g1 + %g3] ASI; \
- add %g1, 0x10, %g1; \
- stxa %l2, [%g1 + %g0] ASI; \
- stxa %l3, [%g1 + %g3] ASI; \
- add %g1, 0x10, %g1; \
- stxa %l4, [%g1 + %g0] ASI; \
- stxa %l5, [%g1 + %g3] ASI; \
- add %g1, 0x10, %g1; \
- stxa %l6, [%g1 + %g0] ASI; \
- stxa %l7, [%g1 + %g3] ASI; \
- add %g1, 0x10, %g1; \
- stxa %i0, [%g1 + %g0] ASI; \
- stxa %i1, [%g1 + %g3] ASI; \
- add %g1, 0x10, %g1; \
- stxa %i2, [%g1 + %g0] ASI; \
- stxa %i3, [%g1 + %g3] ASI; \
- add %g1, 0x10, %g1; \
- stxa %i4, [%g1 + %g0] ASI; \
- stxa %i5, [%g1 + %g3] ASI; \
- add %g1, 0x10, %g1; \
- stxa %i6, [%g1 + %g0] ASI; \
- stxa %i7, [%g1 + %g3] ASI; \
- saved; \
- retry; nop; nop; \
- b,a,pt %xcc, spill_fixup_dax; \
- b,a,pt %xcc, spill_fixup_mna; \
- b,a,pt %xcc, spill_fixup;
-
-#define SPILL_1_GENERIC_ETRAP \
-etrap_user_spill_64bit: \
- stxa %l0, [%sp + STACK_BIAS + 0x00] %asi; \
- stxa %l1, [%sp + STACK_BIAS + 0x08] %asi; \
- stxa %l2, [%sp + STACK_BIAS + 0x10] %asi; \
- stxa %l3, [%sp + STACK_BIAS + 0x18] %asi; \
- stxa %l4, [%sp + STACK_BIAS + 0x20] %asi; \
- stxa %l5, [%sp + STACK_BIAS + 0x28] %asi; \
- stxa %l6, [%sp + STACK_BIAS + 0x30] %asi; \
- stxa %l7, [%sp + STACK_BIAS + 0x38] %asi; \
- stxa %i0, [%sp + STACK_BIAS + 0x40] %asi; \
- stxa %i1, [%sp + STACK_BIAS + 0x48] %asi; \
- stxa %i2, [%sp + STACK_BIAS + 0x50] %asi; \
- stxa %i3, [%sp + STACK_BIAS + 0x58] %asi; \
- stxa %i4, [%sp + STACK_BIAS + 0x60] %asi; \
- stxa %i5, [%sp + STACK_BIAS + 0x68] %asi; \
- stxa %i6, [%sp + STACK_BIAS + 0x70] %asi; \
- stxa %i7, [%sp + STACK_BIAS + 0x78] %asi; \
- saved; \
- sub %g1, 2, %g1; \
- ba,pt %xcc, etrap_save; \
- wrpr %g1, %cwp; \
- nop; nop; nop; nop; nop; \
- nop; nop; nop; nop; \
- ba,a,pt %xcc, etrap_spill_fixup_64bit; \
- ba,a,pt %xcc, etrap_spill_fixup_64bit; \
- ba,a,pt %xcc, etrap_spill_fixup_64bit;
-
-#define SPILL_1_GENERIC_ETRAP_FIXUP \
-etrap_spill_fixup_64bit: \
- ldub [%g6 + TI_WSAVED], %g1; \
- sll %g1, 3, %g3; \
- add %g6, %g3, %g3; \
- stx %sp, [%g3 + TI_RWIN_SPTRS]; \
- sll %g1, 7, %g3; \
- add %g6, %g3, %g3; \
- stx %l0, [%g3 + TI_REG_WINDOW + 0x00]; \
- stx %l1, [%g3 + TI_REG_WINDOW + 0x08]; \
- stx %l2, [%g3 + TI_REG_WINDOW + 0x10]; \
- stx %l3, [%g3 + TI_REG_WINDOW + 0x18]; \
- stx %l4, [%g3 + TI_REG_WINDOW + 0x20]; \
- stx %l5, [%g3 + TI_REG_WINDOW + 0x28]; \
- stx %l6, [%g3 + TI_REG_WINDOW + 0x30]; \
- stx %l7, [%g3 + TI_REG_WINDOW + 0x38]; \
- stx %i0, [%g3 + TI_REG_WINDOW + 0x40]; \
- stx %i1, [%g3 + TI_REG_WINDOW + 0x48]; \
- stx %i2, [%g3 + TI_REG_WINDOW + 0x50]; \
- stx %i3, [%g3 + TI_REG_WINDOW + 0x58]; \
- stx %i4, [%g3 + TI_REG_WINDOW + 0x60]; \
- stx %i5, [%g3 + TI_REG_WINDOW + 0x68]; \
- stx %i6, [%g3 + TI_REG_WINDOW + 0x70]; \
- stx %i7, [%g3 + TI_REG_WINDOW + 0x78]; \
- add %g1, 1, %g1; \
- stb %g1, [%g6 + TI_WSAVED]; \
- saved; \
- rdpr %cwp, %g1; \
- sub %g1, 2, %g1; \
- ba,pt %xcc, etrap_save; \
- wrpr %g1, %cwp; \
- nop; nop; nop
-
-/* Normal 32bit spill */
-#define SPILL_2_GENERIC(ASI) \
- srl %sp, 0, %sp; \
- stwa %l0, [%sp + %g0] ASI; \
- mov 0x04, %g3; \
- stwa %l1, [%sp + %g3] ASI; \
- add %sp, 0x08, %g1; \
- stwa %l2, [%g1 + %g0] ASI; \
- stwa %l3, [%g1 + %g3] ASI; \
- add %g1, 0x08, %g1; \
- stwa %l4, [%g1 + %g0] ASI; \
- stwa %l5, [%g1 + %g3] ASI; \
- add %g1, 0x08, %g1; \
- stwa %l6, [%g1 + %g0] ASI; \
- stwa %l7, [%g1 + %g3] ASI; \
- add %g1, 0x08, %g1; \
- stwa %i0, [%g1 + %g0] ASI; \
- stwa %i1, [%g1 + %g3] ASI; \
- add %g1, 0x08, %g1; \
- stwa %i2, [%g1 + %g0] ASI; \
- stwa %i3, [%g1 + %g3] ASI; \
- add %g1, 0x08, %g1; \
- stwa %i4, [%g1 + %g0] ASI; \
- stwa %i5, [%g1 + %g3] ASI; \
- add %g1, 0x08, %g1; \
- stwa %i6, [%g1 + %g0] ASI; \
- stwa %i7, [%g1 + %g3] ASI; \
- saved; \
- retry; nop; nop; \
- b,a,pt %xcc, spill_fixup_dax; \
- b,a,pt %xcc, spill_fixup_mna; \
- b,a,pt %xcc, spill_fixup;
-
-#define SPILL_2_GENERIC_ETRAP \
-etrap_user_spill_32bit: \
- srl %sp, 0, %sp; \
- stwa %l0, [%sp + 0x00] %asi; \
- stwa %l1, [%sp + 0x04] %asi; \
- stwa %l2, [%sp + 0x08] %asi; \
- stwa %l3, [%sp + 0x0c] %asi; \
- stwa %l4, [%sp + 0x10] %asi; \
- stwa %l5, [%sp + 0x14] %asi; \
- stwa %l6, [%sp + 0x18] %asi; \
- stwa %l7, [%sp + 0x1c] %asi; \
- stwa %i0, [%sp + 0x20] %asi; \
- stwa %i1, [%sp + 0x24] %asi; \
- stwa %i2, [%sp + 0x28] %asi; \
- stwa %i3, [%sp + 0x2c] %asi; \
- stwa %i4, [%sp + 0x30] %asi; \
- stwa %i5, [%sp + 0x34] %asi; \
- stwa %i6, [%sp + 0x38] %asi; \
- stwa %i7, [%sp + 0x3c] %asi; \
- saved; \
- sub %g1, 2, %g1; \
- ba,pt %xcc, etrap_save; \
- wrpr %g1, %cwp; \
- nop; nop; nop; nop; \
- nop; nop; nop; nop; \
- ba,a,pt %xcc, etrap_spill_fixup_32bit; \
- ba,a,pt %xcc, etrap_spill_fixup_32bit; \
- ba,a,pt %xcc, etrap_spill_fixup_32bit;
-
-#define SPILL_2_GENERIC_ETRAP_FIXUP \
-etrap_spill_fixup_32bit: \
- ldub [%g6 + TI_WSAVED], %g1; \
- sll %g1, 3, %g3; \
- add %g6, %g3, %g3; \
- stx %sp, [%g3 + TI_RWIN_SPTRS]; \
- sll %g1, 7, %g3; \
- add %g6, %g3, %g3; \
- stw %l0, [%g3 + TI_REG_WINDOW + 0x00]; \
- stw %l1, [%g3 + TI_REG_WINDOW + 0x04]; \
- stw %l2, [%g3 + TI_REG_WINDOW + 0x08]; \
- stw %l3, [%g3 + TI_REG_WINDOW + 0x0c]; \
- stw %l4, [%g3 + TI_REG_WINDOW + 0x10]; \
- stw %l5, [%g3 + TI_REG_WINDOW + 0x14]; \
- stw %l6, [%g3 + TI_REG_WINDOW + 0x18]; \
- stw %l7, [%g3 + TI_REG_WINDOW + 0x1c]; \
- stw %i0, [%g3 + TI_REG_WINDOW + 0x20]; \
- stw %i1, [%g3 + TI_REG_WINDOW + 0x24]; \
- stw %i2, [%g3 + TI_REG_WINDOW + 0x28]; \
- stw %i3, [%g3 + TI_REG_WINDOW + 0x2c]; \
- stw %i4, [%g3 + TI_REG_WINDOW + 0x30]; \
- stw %i5, [%g3 + TI_REG_WINDOW + 0x34]; \
- stw %i6, [%g3 + TI_REG_WINDOW + 0x38]; \
- stw %i7, [%g3 + TI_REG_WINDOW + 0x3c]; \
- add %g1, 1, %g1; \
- stb %g1, [%g6 + TI_WSAVED]; \
- saved; \
- rdpr %cwp, %g1; \
- sub %g1, 2, %g1; \
- ba,pt %xcc, etrap_save; \
- wrpr %g1, %cwp; \
- nop; nop; nop
-
-#define SPILL_1_NORMAL SPILL_1_GENERIC(ASI_AIUP)
-#define SPILL_2_NORMAL SPILL_2_GENERIC(ASI_AIUP)
-#define SPILL_3_NORMAL SPILL_0_NORMAL
-#define SPILL_4_NORMAL SPILL_0_NORMAL
-#define SPILL_5_NORMAL SPILL_0_NORMAL
-#define SPILL_6_NORMAL SPILL_0_NORMAL
-#define SPILL_7_NORMAL SPILL_0_NORMAL
-
-#define SPILL_0_OTHER SPILL_0_NORMAL
-#define SPILL_1_OTHER SPILL_1_GENERIC(ASI_AIUS)
-#define SPILL_2_OTHER SPILL_2_GENERIC(ASI_AIUS)
-#define SPILL_3_OTHER SPILL_3_NORMAL
-#define SPILL_4_OTHER SPILL_4_NORMAL
-#define SPILL_5_OTHER SPILL_5_NORMAL
-#define SPILL_6_OTHER SPILL_6_NORMAL
-#define SPILL_7_OTHER SPILL_7_NORMAL
-
-/* Normal kernel fill */
-#define FILL_0_NORMAL \
- ldx [%sp + STACK_BIAS + 0x00], %l0; \
- ldx [%sp + STACK_BIAS + 0x08], %l1; \
- ldx [%sp + STACK_BIAS + 0x10], %l2; \
- ldx [%sp + STACK_BIAS + 0x18], %l3; \
- ldx [%sp + STACK_BIAS + 0x20], %l4; \
- ldx [%sp + STACK_BIAS + 0x28], %l5; \
- ldx [%sp + STACK_BIAS + 0x30], %l6; \
- ldx [%sp + STACK_BIAS + 0x38], %l7; \
- ldx [%sp + STACK_BIAS + 0x40], %i0; \
- ldx [%sp + STACK_BIAS + 0x48], %i1; \
- ldx [%sp + STACK_BIAS + 0x50], %i2; \
- ldx [%sp + STACK_BIAS + 0x58], %i3; \
- ldx [%sp + STACK_BIAS + 0x60], %i4; \
- ldx [%sp + STACK_BIAS + 0x68], %i5; \
- ldx [%sp + STACK_BIAS + 0x70], %i6; \
- ldx [%sp + STACK_BIAS + 0x78], %i7; \
- restored; retry; nop; nop; nop; nop; nop; nop; \
- nop; nop; nop; nop; nop; nop; nop; nop;
-
-#define FILL_0_NORMAL_RTRAP \
-kern_rtt_fill: \
- rdpr %cwp, %g1; \
- sub %g1, 1, %g1; \
- wrpr %g1, %cwp; \
- ldx [%sp + STACK_BIAS + 0x00], %l0; \
- ldx [%sp + STACK_BIAS + 0x08], %l1; \
- ldx [%sp + STACK_BIAS + 0x10], %l2; \
- ldx [%sp + STACK_BIAS + 0x18], %l3; \
- ldx [%sp + STACK_BIAS + 0x20], %l4; \
- ldx [%sp + STACK_BIAS + 0x28], %l5; \
- ldx [%sp + STACK_BIAS + 0x30], %l6; \
- ldx [%sp + STACK_BIAS + 0x38], %l7; \
- ldx [%sp + STACK_BIAS + 0x40], %i0; \
- ldx [%sp + STACK_BIAS + 0x48], %i1; \
- ldx [%sp + STACK_BIAS + 0x50], %i2; \
- ldx [%sp + STACK_BIAS + 0x58], %i3; \
- ldx [%sp + STACK_BIAS + 0x60], %i4; \
- ldx [%sp + STACK_BIAS + 0x68], %i5; \
- ldx [%sp + STACK_BIAS + 0x70], %i6; \
- ldx [%sp + STACK_BIAS + 0x78], %i7; \
- restored; \
- add %g1, 1, %g1; \
- ba,pt %xcc, kern_rtt_restore; \
- wrpr %g1, %cwp; \
- nop; nop; nop; nop; nop; \
- nop; nop; nop; nop;
-
-
-/* Normal 64bit fill */
-#define FILL_1_GENERIC(ASI) \
- add %sp, STACK_BIAS + 0x00, %g1; \
- ldxa [%g1 + %g0] ASI, %l0; \
- mov 0x08, %g2; \
- mov 0x10, %g3; \
- ldxa [%g1 + %g2] ASI, %l1; \
- mov 0x18, %g5; \
- ldxa [%g1 + %g3] ASI, %l2; \
- ldxa [%g1 + %g5] ASI, %l3; \
- add %g1, 0x20, %g1; \
- ldxa [%g1 + %g0] ASI, %l4; \
- ldxa [%g1 + %g2] ASI, %l5; \
- ldxa [%g1 + %g3] ASI, %l6; \
- ldxa [%g1 + %g5] ASI, %l7; \
- add %g1, 0x20, %g1; \
- ldxa [%g1 + %g0] ASI, %i0; \
- ldxa [%g1 + %g2] ASI, %i1; \
- ldxa [%g1 + %g3] ASI, %i2; \
- ldxa [%g1 + %g5] ASI, %i3; \
- add %g1, 0x20, %g1; \
- ldxa [%g1 + %g0] ASI, %i4; \
- ldxa [%g1 + %g2] ASI, %i5; \
- ldxa [%g1 + %g3] ASI, %i6; \
- ldxa [%g1 + %g5] ASI, %i7; \
- restored; \
- retry; nop; nop; nop; nop; \
- b,a,pt %xcc, fill_fixup_dax; \
- b,a,pt %xcc, fill_fixup_mna; \
- b,a,pt %xcc, fill_fixup;
-
-#define FILL_1_GENERIC_RTRAP \
-user_rtt_fill_64bit: \
- ldxa [%sp + STACK_BIAS + 0x00] %asi, %l0; \
- ldxa [%sp + STACK_BIAS + 0x08] %asi, %l1; \
- ldxa [%sp + STACK_BIAS + 0x10] %asi, %l2; \
- ldxa [%sp + STACK_BIAS + 0x18] %asi, %l3; \
- ldxa [%sp + STACK_BIAS + 0x20] %asi, %l4; \
- ldxa [%sp + STACK_BIAS + 0x28] %asi, %l5; \
- ldxa [%sp + STACK_BIAS + 0x30] %asi, %l6; \
- ldxa [%sp + STACK_BIAS + 0x38] %asi, %l7; \
- ldxa [%sp + STACK_BIAS + 0x40] %asi, %i0; \
- ldxa [%sp + STACK_BIAS + 0x48] %asi, %i1; \
- ldxa [%sp + STACK_BIAS + 0x50] %asi, %i2; \
- ldxa [%sp + STACK_BIAS + 0x58] %asi, %i3; \
- ldxa [%sp + STACK_BIAS + 0x60] %asi, %i4; \
- ldxa [%sp + STACK_BIAS + 0x68] %asi, %i5; \
- ldxa [%sp + STACK_BIAS + 0x70] %asi, %i6; \
- ldxa [%sp + STACK_BIAS + 0x78] %asi, %i7; \
- ba,pt %xcc, user_rtt_pre_restore; \
- restored; \
- nop; nop; nop; nop; nop; nop; \
- nop; nop; nop; nop; nop; \
- ba,a,pt %xcc, user_rtt_fill_fixup; \
- ba,a,pt %xcc, user_rtt_fill_fixup; \
- ba,a,pt %xcc, user_rtt_fill_fixup;
-
-
-/* Normal 32bit fill */
-#define FILL_2_GENERIC(ASI) \
- srl %sp, 0, %sp; \
- lduwa [%sp + %g0] ASI, %l0; \
- mov 0x04, %g2; \
- mov 0x08, %g3; \
- lduwa [%sp + %g2] ASI, %l1; \
- mov 0x0c, %g5; \
- lduwa [%sp + %g3] ASI, %l2; \
- lduwa [%sp + %g5] ASI, %l3; \
- add %sp, 0x10, %g1; \
- lduwa [%g1 + %g0] ASI, %l4; \
- lduwa [%g1 + %g2] ASI, %l5; \
- lduwa [%g1 + %g3] ASI, %l6; \
- lduwa [%g1 + %g5] ASI, %l7; \
- add %g1, 0x10, %g1; \
- lduwa [%g1 + %g0] ASI, %i0; \
- lduwa [%g1 + %g2] ASI, %i1; \
- lduwa [%g1 + %g3] ASI, %i2; \
- lduwa [%g1 + %g5] ASI, %i3; \
- add %g1, 0x10, %g1; \
- lduwa [%g1 + %g0] ASI, %i4; \
- lduwa [%g1 + %g2] ASI, %i5; \
- lduwa [%g1 + %g3] ASI, %i6; \
- lduwa [%g1 + %g5] ASI, %i7; \
- restored; \
- retry; nop; nop; nop; nop; \
- b,a,pt %xcc, fill_fixup_dax; \
- b,a,pt %xcc, fill_fixup_mna; \
- b,a,pt %xcc, fill_fixup;
-
-#define FILL_2_GENERIC_RTRAP \
-user_rtt_fill_32bit: \
- srl %sp, 0, %sp; \
- lduwa [%sp + 0x00] %asi, %l0; \
- lduwa [%sp + 0x04] %asi, %l1; \
- lduwa [%sp + 0x08] %asi, %l2; \
- lduwa [%sp + 0x0c] %asi, %l3; \
- lduwa [%sp + 0x10] %asi, %l4; \
- lduwa [%sp + 0x14] %asi, %l5; \
- lduwa [%sp + 0x18] %asi, %l6; \
- lduwa [%sp + 0x1c] %asi, %l7; \
- lduwa [%sp + 0x20] %asi, %i0; \
- lduwa [%sp + 0x24] %asi, %i1; \
- lduwa [%sp + 0x28] %asi, %i2; \
- lduwa [%sp + 0x2c] %asi, %i3; \
- lduwa [%sp + 0x30] %asi, %i4; \
- lduwa [%sp + 0x34] %asi, %i5; \
- lduwa [%sp + 0x38] %asi, %i6; \
- lduwa [%sp + 0x3c] %asi, %i7; \
- ba,pt %xcc, user_rtt_pre_restore; \
- restored; \
- nop; nop; nop; nop; nop; \
- nop; nop; nop; nop; nop; \
- ba,a,pt %xcc, user_rtt_fill_fixup; \
- ba,a,pt %xcc, user_rtt_fill_fixup; \
- ba,a,pt %xcc, user_rtt_fill_fixup;
-
-
-#define FILL_1_NORMAL FILL_1_GENERIC(ASI_AIUP)
-#define FILL_2_NORMAL FILL_2_GENERIC(ASI_AIUP)
-#define FILL_3_NORMAL FILL_0_NORMAL
-#define FILL_4_NORMAL FILL_0_NORMAL
-#define FILL_5_NORMAL FILL_0_NORMAL
-#define FILL_6_NORMAL FILL_0_NORMAL
-#define FILL_7_NORMAL FILL_0_NORMAL
-
-#define FILL_0_OTHER FILL_0_NORMAL
-#define FILL_1_OTHER FILL_1_GENERIC(ASI_AIUS)
-#define FILL_2_OTHER FILL_2_GENERIC(ASI_AIUS)
-#define FILL_3_OTHER FILL_3_NORMAL
-#define FILL_4_OTHER FILL_4_NORMAL
-#define FILL_5_OTHER FILL_5_NORMAL
-#define FILL_6_OTHER FILL_6_NORMAL
-#define FILL_7_OTHER FILL_7_NORMAL
-
-#endif /* !(_SPARC64_TTABLE_H) */
+#include <asm-sparc/ttable.h>
diff --git a/include/asm-sparc64/upa.h b/include/asm-sparc64/upa.h
index 5b1633223f9..aab72930815 100644
--- a/include/asm-sparc64/upa.h
+++ b/include/asm-sparc64/upa.h
@@ -1,109 +1 @@
-#ifndef _SPARC64_UPA_H
-#define _SPARC64_UPA_H
-
-#include <asm/asi.h>
-
-/* UPA level registers and defines. */
-
-/* UPA Config Register */
-#define UPA_CONFIG_RESV 0xffffffffc0000000 /* Reserved. */
-#define UPA_CONFIG_PCON 0x000000003fc00000 /* Depth of various sys queues. */
-#define UPA_CONFIG_MID 0x00000000003e0000 /* Module ID. */
-#define UPA_CONFIG_PCAP 0x000000000001ffff /* Port Capabilities. */
-
-/* UPA Port ID Register */
-#define UPA_PORTID_FNP 0xff00000000000000 /* Hardcoded to 0xfc on ultra. */
-#define UPA_PORTID_RESV 0x00fffff800000000 /* Reserved. */
-#define UPA_PORTID_ECCVALID 0x0000000400000000 /* Zero if mod can generate ECC */
-#define UPA_PORTID_ONEREAD 0x0000000200000000 /* Set if mod generates P_RASB */
-#define UPA_PORTID_PINTRDQ 0x0000000180000000 /* # outstanding P_INT_REQ's */
-#define UPA_PORTID_PREQDQ 0x000000007e000000 /* slave-wr's to mod supported */
-#define UPA_PORTID_PREQRD 0x0000000001e00000 /* # incoming P_REQ's supported */
-#define UPA_PORTID_UPACAP 0x00000000001f0000 /* UPA capabilities of mod */
-#define UPA_PORTID_ID 0x000000000000ffff /* Module Identification bits */
-
-/* UPA I/O space accessors */
-#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
-static inline unsigned char _upa_readb(unsigned long addr)
-{
- unsigned char ret;
-
- __asm__ __volatile__("lduba\t[%1] %2, %0\t/* upa_readb */"
- : "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-
- return ret;
-}
-
-static inline unsigned short _upa_readw(unsigned long addr)
-{
- unsigned short ret;
-
- __asm__ __volatile__("lduha\t[%1] %2, %0\t/* upa_readw */"
- : "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-
- return ret;
-}
-
-static inline unsigned int _upa_readl(unsigned long addr)
-{
- unsigned int ret;
-
- __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* upa_readl */"
- : "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-
- return ret;
-}
-
-static inline unsigned long _upa_readq(unsigned long addr)
-{
- unsigned long ret;
-
- __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* upa_readq */"
- : "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-
- return ret;
-}
-
-static inline void _upa_writeb(unsigned char b, unsigned long addr)
-{
- __asm__ __volatile__("stba\t%0, [%1] %2\t/* upa_writeb */"
- : /* no outputs */
- : "r" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-static inline void _upa_writew(unsigned short w, unsigned long addr)
-{
- __asm__ __volatile__("stha\t%0, [%1] %2\t/* upa_writew */"
- : /* no outputs */
- : "r" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-static inline void _upa_writel(unsigned int l, unsigned long addr)
-{
- __asm__ __volatile__("stwa\t%0, [%1] %2\t/* upa_writel */"
- : /* no outputs */
- : "r" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-static inline void _upa_writeq(unsigned long q, unsigned long addr)
-{
- __asm__ __volatile__("stxa\t%0, [%1] %2\t/* upa_writeq */"
- : /* no outputs */
- : "r" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-#define upa_readb(__addr) (_upa_readb((unsigned long)(__addr)))
-#define upa_readw(__addr) (_upa_readw((unsigned long)(__addr)))
-#define upa_readl(__addr) (_upa_readl((unsigned long)(__addr)))
-#define upa_readq(__addr) (_upa_readq((unsigned long)(__addr)))
-#define upa_writeb(__b, __addr) (_upa_writeb((__b), (unsigned long)(__addr)))
-#define upa_writew(__w, __addr) (_upa_writew((__w), (unsigned long)(__addr)))
-#define upa_writel(__l, __addr) (_upa_writel((__l), (unsigned long)(__addr)))
-#define upa_writeq(__q, __addr) (_upa_writeq((__q), (unsigned long)(__addr)))
-#endif /* __KERNEL__ && !__ASSEMBLY__ */
-
-#endif /* !(_SPARC64_UPA_H) */
+#include <asm-sparc/upa.h>
diff --git a/include/asm-sparc64/vio.h b/include/asm-sparc64/vio.h
index d4de32f0f8a..299b26ab81a 100644
--- a/include/asm-sparc64/vio.h
+++ b/include/asm-sparc64/vio.h
@@ -1,406 +1 @@
-#ifndef _SPARC64_VIO_H
-#define _SPARC64_VIO_H
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/list.h>
-#include <linux/log2.h>
-
-#include <asm/ldc.h>
-#include <asm/mdesc.h>
-
-struct vio_msg_tag {
- u8 type;
-#define VIO_TYPE_CTRL 0x01
-#define VIO_TYPE_DATA 0x02
-#define VIO_TYPE_ERR 0x04
-
- u8 stype;
-#define VIO_SUBTYPE_INFO 0x01
-#define VIO_SUBTYPE_ACK 0x02
-#define VIO_SUBTYPE_NACK 0x04
-
- u16 stype_env;
-#define VIO_VER_INFO 0x0001
-#define VIO_ATTR_INFO 0x0002
-#define VIO_DRING_REG 0x0003
-#define VIO_DRING_UNREG 0x0004
-#define VIO_RDX 0x0005
-#define VIO_PKT_DATA 0x0040
-#define VIO_DESC_DATA 0x0041
-#define VIO_DRING_DATA 0x0042
-#define VNET_MCAST_INFO 0x0101
-
- u32 sid;
-};
-
-struct vio_rdx {
- struct vio_msg_tag tag;
- u64 resv[6];
-};
-
-struct vio_ver_info {
- struct vio_msg_tag tag;
- u16 major;
- u16 minor;
- u8 dev_class;
-#define VDEV_NETWORK 0x01
-#define VDEV_NETWORK_SWITCH 0x02
-#define VDEV_DISK 0x03
-#define VDEV_DISK_SERVER 0x04
-
- u8 resv1[3];
- u64 resv2[5];
-};
-
-struct vio_dring_register {
- struct vio_msg_tag tag;
- u64 dring_ident;
- u32 num_descr;
- u32 descr_size;
- u16 options;
-#define VIO_TX_DRING 0x0001
-#define VIO_RX_DRING 0x0002
- u16 resv;
- u32 num_cookies;
- struct ldc_trans_cookie cookies[0];
-};
-
-struct vio_dring_unregister {
- struct vio_msg_tag tag;
- u64 dring_ident;
- u64 resv[5];
-};
-
-/* Data transfer modes */
-#define VIO_PKT_MODE 0x01 /* Packet based transfer */
-#define VIO_DESC_MODE 0x02 /* In-band descriptors */
-#define VIO_DRING_MODE 0x03 /* Descriptor rings */
-
-struct vio_dring_data {
- struct vio_msg_tag tag;
- u64 seq;
- u64 dring_ident;
- u32 start_idx;
- u32 end_idx;
- u8 state;
-#define VIO_DRING_ACTIVE 0x01
-#define VIO_DRING_STOPPED 0x02
-
- u8 __pad1;
- u16 __pad2;
- u32 __pad3;
- u64 __par4[2];
-};
-
-struct vio_dring_hdr {
- u8 state;
-#define VIO_DESC_FREE 0x01
-#define VIO_DESC_READY 0x02
-#define VIO_DESC_ACCEPTED 0x03
-#define VIO_DESC_DONE 0x04
- u8 ack;
-#define VIO_ACK_ENABLE 0x01
-#define VIO_ACK_DISABLE 0x00
-
- u16 __pad1;
- u32 __pad2;
-};
-
-/* VIO disk specific structures and defines */
-struct vio_disk_attr_info {
- struct vio_msg_tag tag;
- u8 xfer_mode;
- u8 vdisk_type;
-#define VD_DISK_TYPE_SLICE 0x01 /* Slice in block device */
-#define VD_DISK_TYPE_DISK 0x02 /* Entire block device */
- u16 resv1;
- u32 vdisk_block_size;
- u64 operations;
- u64 vdisk_size;
- u64 max_xfer_size;
- u64 resv2[2];
-};
-
-struct vio_disk_desc {
- struct vio_dring_hdr hdr;
- u64 req_id;
- u8 operation;
-#define VD_OP_BREAD 0x01 /* Block read */
-#define VD_OP_BWRITE 0x02 /* Block write */
-#define VD_OP_FLUSH 0x03 /* Flush disk contents */
-#define VD_OP_GET_WCE 0x04 /* Get write-cache status */
-#define VD_OP_SET_WCE 0x05 /* Enable/disable write-cache */
-#define VD_OP_GET_VTOC 0x06 /* Get VTOC */
-#define VD_OP_SET_VTOC 0x07 /* Set VTOC */
-#define VD_OP_GET_DISKGEOM 0x08 /* Get disk geometry */
-#define VD_OP_SET_DISKGEOM 0x09 /* Set disk geometry */
-#define VD_OP_SCSICMD 0x0a /* SCSI control command */
-#define VD_OP_GET_DEVID 0x0b /* Get device ID */
-#define VD_OP_GET_EFI 0x0c /* Get EFI */
-#define VD_OP_SET_EFI 0x0d /* Set EFI */
- u8 slice;
- u16 resv1;
- u32 status;
- u64 offset;
- u64 size;
- u32 ncookies;
- u32 resv2;
- struct ldc_trans_cookie cookies[0];
-};
-
-#define VIO_DISK_VNAME_LEN 8
-#define VIO_DISK_ALABEL_LEN 128
-#define VIO_DISK_NUM_PART 8
-
-struct vio_disk_vtoc {
- u8 volume_name[VIO_DISK_VNAME_LEN];
- u16 sector_size;
- u16 num_partitions;
- u8 ascii_label[VIO_DISK_ALABEL_LEN];
- struct {
- u16 id;
- u16 perm_flags;
- u32 resv;
- u64 start_block;
- u64 num_blocks;
- } partitions[VIO_DISK_NUM_PART];
-};
-
-struct vio_disk_geom {
- u16 num_cyl; /* Num data cylinders */
- u16 alt_cyl; /* Num alternate cylinders */
- u16 beg_cyl; /* Cyl off of fixed head area */
- u16 num_hd; /* Num heads */
- u16 num_sec; /* Num sectors */
- u16 ifact; /* Interleave factor */
- u16 apc; /* Alts per cylinder (SCSI) */
- u16 rpm; /* Revolutions per minute */
- u16 phy_cyl; /* Num physical cylinders */
- u16 wr_skip; /* Num sects to skip, writes */
- u16 rd_skip; /* Num sects to skip, writes */
-};
-
-struct vio_disk_devid {
- u16 resv;
- u16 type;
- u32 len;
- char id[0];
-};
-
-struct vio_disk_efi {
- u64 lba;
- u64 len;
- char data[0];
-};
-
-/* VIO net specific structures and defines */
-struct vio_net_attr_info {
- struct vio_msg_tag tag;
- u8 xfer_mode;
- u8 addr_type;
-#define VNET_ADDR_ETHERMAC 0x01
- u16 ack_freq;
- u32 resv1;
- u64 addr;
- u64 mtu;
- u64 resv2[3];
-};
-
-#define VNET_NUM_MCAST 7
-
-struct vio_net_mcast_info {
- struct vio_msg_tag tag;
- u8 set;
- u8 count;
- u8 mcast_addr[VNET_NUM_MCAST * 6];
- u32 resv;
-};
-
-struct vio_net_desc {
- struct vio_dring_hdr hdr;
- u32 size;
- u32 ncookies;
- struct ldc_trans_cookie cookies[0];
-};
-
-#define VIO_MAX_RING_COOKIES 24
-
-struct vio_dring_state {
- u64 ident;
- void *base;
- u64 snd_nxt;
- u64 rcv_nxt;
- u32 entry_size;
- u32 num_entries;
- u32 prod;
- u32 cons;
- u32 pending;
- int ncookies;
- struct ldc_trans_cookie cookies[VIO_MAX_RING_COOKIES];
-};
-
-static inline void *vio_dring_cur(struct vio_dring_state *dr)
-{
- return dr->base + (dr->entry_size * dr->prod);
-}
-
-static inline void *vio_dring_entry(struct vio_dring_state *dr,
- unsigned int index)
-{
- return dr->base + (dr->entry_size * index);
-}
-
-static inline u32 vio_dring_avail(struct vio_dring_state *dr,
- unsigned int ring_size)
-{
- BUILD_BUG_ON(!is_power_of_2(ring_size));
-
- return (dr->pending -
- ((dr->prod - dr->cons) & (ring_size - 1)));
-}
-
-#define VIO_MAX_TYPE_LEN 32
-#define VIO_MAX_COMPAT_LEN 64
-
-struct vio_dev {
- u64 mp;
- struct device_node *dp;
-
- char type[VIO_MAX_TYPE_LEN];
- char compat[VIO_MAX_COMPAT_LEN];
- int compat_len;
-
- u64 dev_no;
-
- unsigned long channel_id;
-
- unsigned int tx_irq;
- unsigned int rx_irq;
-
- struct device dev;
-};
-
-struct vio_driver {
- struct list_head node;
- const struct vio_device_id *id_table;
- int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
- int (*remove)(struct vio_dev *dev);
- void (*shutdown)(struct vio_dev *dev);
- unsigned long driver_data;
- struct device_driver driver;
-};
-
-struct vio_version {
- u16 major;
- u16 minor;
-};
-
-struct vio_driver_state;
-struct vio_driver_ops {
- int (*send_attr)(struct vio_driver_state *vio);
- int (*handle_attr)(struct vio_driver_state *vio, void *pkt);
- void (*handshake_complete)(struct vio_driver_state *vio);
-};
-
-struct vio_completion {
- struct completion com;
- int err;
- int waiting_for;
-};
-
-struct vio_driver_state {
- /* Protects VIO handshake and, optionally, driver private state. */
- spinlock_t lock;
-
- struct ldc_channel *lp;
-
- u32 _peer_sid;
- u32 _local_sid;
- struct vio_dring_state drings[2];
-#define VIO_DRIVER_TX_RING 0
-#define VIO_DRIVER_RX_RING 1
-
- u8 hs_state;
-#define VIO_HS_INVALID 0x00
-#define VIO_HS_GOTVERS 0x01
-#define VIO_HS_GOT_ATTR 0x04
-#define VIO_HS_SENT_DREG 0x08
-#define VIO_HS_SENT_RDX 0x10
-#define VIO_HS_GOT_RDX_ACK 0x20
-#define VIO_HS_GOT_RDX 0x40
-#define VIO_HS_SENT_RDX_ACK 0x80
-#define VIO_HS_COMPLETE (VIO_HS_GOT_RDX_ACK | VIO_HS_SENT_RDX_ACK)
-
- u8 dev_class;
-
- u8 dr_state;
-#define VIO_DR_STATE_TXREG 0x01
-#define VIO_DR_STATE_RXREG 0x02
-#define VIO_DR_STATE_TXREQ 0x10
-#define VIO_DR_STATE_RXREQ 0x20
-
- u8 debug;
-#define VIO_DEBUG_HS 0x01
-#define VIO_DEBUG_DATA 0x02
-
- void *desc_buf;
- unsigned int desc_buf_len;
-
- struct vio_completion *cmp;
-
- struct vio_dev *vdev;
-
- struct timer_list timer;
-
- struct vio_version ver;
-
- struct vio_version *ver_table;
- int ver_table_entries;
-
- char *name;
-
- struct vio_driver_ops *ops;
-};
-
-#define viodbg(TYPE, f, a...) \
-do { if (vio->debug & VIO_DEBUG_##TYPE) \
- printk(KERN_INFO "vio: ID[%lu] " f, \
- vio->vdev->channel_id, ## a); \
-} while (0)
-
-extern int vio_register_driver(struct vio_driver *drv);
-extern void vio_unregister_driver(struct vio_driver *drv);
-
-static inline struct vio_driver *to_vio_driver(struct device_driver *drv)
-{
- return container_of(drv, struct vio_driver, driver);
-}
-
-static inline struct vio_dev *to_vio_dev(struct device *dev)
-{
- return container_of(dev, struct vio_dev, dev);
-}
-
-extern int vio_ldc_send(struct vio_driver_state *vio, void *data, int len);
-extern void vio_link_state_change(struct vio_driver_state *vio, int event);
-extern void vio_conn_reset(struct vio_driver_state *vio);
-extern int vio_control_pkt_engine(struct vio_driver_state *vio, void *pkt);
-extern int vio_validate_sid(struct vio_driver_state *vio,
- struct vio_msg_tag *tp);
-extern u32 vio_send_sid(struct vio_driver_state *vio);
-extern int vio_ldc_alloc(struct vio_driver_state *vio,
- struct ldc_channel_config *base_cfg, void *event_arg);
-extern void vio_ldc_free(struct vio_driver_state *vio);
-extern int vio_driver_init(struct vio_driver_state *vio, struct vio_dev *vdev,
- u8 dev_class, struct vio_version *ver_table,
- int ver_table_size, struct vio_driver_ops *ops,
- char *name);
-
-extern void vio_port_up(struct vio_driver_state *vio);
-
-#endif /* _SPARC64_VIO_H */
+#include <asm-sparc/vio.h>
diff --git a/include/asm-sparc64/visasm.h b/include/asm-sparc64/visasm.h
index 34f2ec64933..837a12278f4 100644
--- a/include/asm-sparc64/visasm.h
+++ b/include/asm-sparc64/visasm.h
@@ -1,62 +1 @@
-#ifndef _SPARC64_VISASM_H
-#define _SPARC64_VISASM_H
-
-/* visasm.h: FPU saving macros for VIS routines
- *
- * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
- */
-
-#include <asm/pstate.h>
-#include <asm/ptrace.h>
-
-/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc */
-
-#define VISEntry \
- rd %fprs, %o5; \
- andcc %o5, (FPRS_FEF|FPRS_DU), %g0; \
- be,pt %icc, 297f; \
- sethi %hi(297f), %g7; \
- sethi %hi(VISenter), %g1; \
- jmpl %g1 + %lo(VISenter), %g0; \
- or %g7, %lo(297f), %g7; \
-297: wr %g0, FPRS_FEF, %fprs; \
-
-#define VISExit \
- wr %g0, 0, %fprs;
-
-/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc.
- * Must preserve %o5 between VISEntryHalf and VISExitHalf */
-
-#define VISEntryHalf \
- rd %fprs, %o5; \
- andcc %o5, FPRS_FEF, %g0; \
- be,pt %icc, 297f; \
- sethi %hi(298f), %g7; \
- sethi %hi(VISenterhalf), %g1; \
- jmpl %g1 + %lo(VISenterhalf), %g0; \
- or %g7, %lo(298f), %g7; \
- clr %o5; \
-297: wr %o5, FPRS_FEF, %fprs; \
-298:
-
-#define VISExitHalf \
- wr %o5, 0, %fprs;
-
-#ifndef __ASSEMBLY__
-static inline void save_and_clear_fpu(void) {
- __asm__ __volatile__ (
-" rd %%fprs, %%o5\n"
-" andcc %%o5, %0, %%g0\n"
-" be,pt %%icc, 299f\n"
-" sethi %%hi(298f), %%g7\n"
-" sethi %%hi(VISenter), %%g1\n"
-" jmpl %%g1 + %%lo(VISenter), %%g0\n"
-" or %%g7, %%lo(298f), %%g7\n"
-" 298: wr %%g0, 0, %%fprs\n"
-" 299:\n"
-" " : : "i" (FPRS_FEF|FPRS_DU) :
- "o5", "g1", "g2", "g3", "g7", "cc");
-}
-#endif
-
-#endif /* _SPARC64_ASI_H */
+#include <asm-sparc/visasm.h>