Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
  TTY: serial_core: Fix crash if DCD drop during suspend
  tty/serial: atmel_serial: bootconsole removed from auto-enumerates
  Revert "TTY: call tty_driver_lookup_tty unconditionally"
  tty/serial: atmel_serial: add device tree support
  tty/serial: atmel_serial: auto-enumerate ports
  tty/serial: atmel_serial: whitespace and braces modifications
  tty/serial: atmel_serial: change platform_data variable name
  tty/serial: RS485 bindings for device tree
  TTY: call tty_driver_lookup_tty unconditionally
  TTY: pty, release tty in all ptmx_open fail paths
  TTY: make tty_add_file non-failing
  TTY: drop driver reference in tty_open fail path
  8250_pci: Fix kernel panic when pch_uart is disabled
  h8300: drivers/serial/Kconfig was moved
  parport_pc: release IO region properly if unsupported ITE887x card is found
  tty: Support compat_ioctl get/set termios_locked
  hvc_console: display printk messages on console.
  TTY: snyclinkmp: forever loop in tx_load_dma_buffer()
  tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output
  tty/n_gsm: fix a bug in gsm_dlci_data_output (adaption = 2 case)
  ...

Fix up Conflicts in:
 - drivers/tty/serial/8250_pci.c
	Trivial conflict with removed duplicate device ID
 - drivers/tty/serial/atmel_serial.c
	Annoying silly conflict between "specify the port num via
	platform_data" and other changes to atmel_console_init

5 files changed, 32 insertions, 8 deletions

diff --git a/include/linux/serial.h b/include/linux/serial.h
index ef914061511..97ff8e27a6c 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -211,6 +211,7 @@ struct serial_rs485 {
 #define SER_RS485_RTS_ON_SEND		(1 << 1)
 #define SER_RS485_RTS_AFTER_SEND	(1 << 2)
 #define SER_RS485_RTS_BEFORE_SEND	(1 << 3)
+#define SER_RS485_RX_DURING_TX		(1 << 4)
 	__u32	delay_rts_before_send;	/* Milliseconds */
 	__u32	delay_rts_after_send;	/* Milliseconds */
 	__u32	padding[5];		/* Memory is cheap, new structs
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 97f5b45bbc0..1f05bbeac01 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -35,6 +35,7 @@ struct plat_serial8250_port {
 	void		(*set_termios)(struct uart_port *,
 			               struct ktermios *new,
 			               struct ktermios *old);
+	int		(*handle_irq)(struct uart_port *);
 	void		(*pm)(struct uart_port *, unsigned int state,
 			      unsigned old);
 };
@@ -80,6 +81,7 @@ extern void serial8250_do_set_termios(struct uart_port *port,
 		struct ktermios *termios, struct ktermios *old);
 extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
 			     unsigned int oldstate);
+int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
 
 extern void serial8250_set_isa_configurator(void (*v)
 					(int port, struct uart_port *up,
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index a5c31146a33..eadf33d0abb 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -46,7 +46,8 @@
 #define PORT_AR7	18	/* Texas Instruments AR7 internal UART */
 #define PORT_U6_16550A	19	/* ST-Ericsson U6xxx internal UART */
 #define PORT_TEGRA	20	/* NVIDIA Tegra internal UART */
-#define PORT_MAX_8250	20	/* max port ID */
+#define PORT_XR17D15X	21	/* Exar XR17D15x UART */
+#define PORT_MAX_8250	21	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed
@@ -300,6 +301,7 @@ struct uart_port {
 	void			(*set_termios)(struct uart_port *,
 				               struct ktermios *new,
 				               struct ktermios *old);
+	int			(*handle_irq)(struct uart_port *);
 	void			(*pm)(struct uart_port *, unsigned int state,
 				      unsigned int old);
 	unsigned int		irq;			/* irq number */
@@ -317,9 +319,7 @@ struct uart_port {
 #define UPIO_MEM32		(3)
 #define UPIO_AU			(4)			/* Au1x00 type IO */
 #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
-#define UPIO_DWAPB		(6)			/* DesignWare APB UART */
-#define UPIO_RM9000		(7)			/* RM9000 type IO */
-#define UPIO_DWAPB32		(8)			/* DesignWare APB UART (32 bit accesses) */
+#define UPIO_RM9000		(6)			/* RM9000 type IO */
 
 	unsigned int		read_status_mask;	/* driver specific */
 	unsigned int		ignore_status_mask;	/* driver specific */
@@ -350,6 +350,7 @@ struct uart_port {
 #define UPF_MAGIC_MULTIPLIER	((__force upf_t) (1 << 16))
 #define UPF_CONS_FLOW		((__force upf_t) (1 << 23))
 #define UPF_SHARE_IRQ		((__force upf_t) (1 << 24))
+#define UPF_EXAR_EFR		((__force upf_t) (1 << 25))
 /* The exact UART type is known and should not be probed.  */
 #define UPF_FIXED_TYPE		((__force upf_t) (1 << 27))
 #define UPF_BOOT_AUTOCONF	((__force upf_t) (1 << 28))
@@ -384,7 +385,6 @@ struct uart_state {
 	int			pm_state;
 	struct circ_buf		xmit;
 
-	struct tasklet_struct	tlet;
 	struct uart_port	*uart_port;
 };
 
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index c75bda37c18..8ce70d76f83 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -152,6 +152,7 @@
  * LCR=0xBF (or DLAB=1 for 16C660)
  */
 #define UART_EFR	2	/* I/O: Extended Features Register */
+#define UART_XR_EFR	9	/* I/O: Extended Features Register (XR17D15x) */
 #define UART_EFR_CTS		0x80 /* CTS flow control */
 #define UART_EFR_RTS		0x40 /* RTS flow control */
 #define UART_EFR_SCD		0x20 /* Special character detect */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 5f2ede82b3d..5dbb3cb05a8 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -473,7 +473,9 @@ extern void proc_clear_tty(struct task_struct *p);
 extern struct tty_struct *get_current_tty(void);
 extern void tty_default_fops(struct file_operations *fops);
 extern struct tty_struct *alloc_tty_struct(void);
-extern int tty_add_file(struct tty_struct *tty, struct file *file);
+extern int tty_alloc_file(struct file *file);
+extern void tty_add_file(struct tty_struct *tty, struct file *file);
+extern void tty_free_file(struct file *file);
 extern void free_tty_struct(struct tty_struct *tty);
 extern void initialize_tty_struct(struct tty_struct *tty,
 		struct tty_driver *driver, int idx);
@@ -581,6 +583,8 @@ extern int __init tty_init(void);
 /* tty_ioctl.c */
 extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
 		       unsigned int cmd, unsigned long arg);
+extern long n_tty_compat_ioctl_helper(struct tty_struct *tty, struct file *file,
+		       unsigned int cmd, unsigned long arg);
 
 /* serial.c */
 
@@ -602,8 +606,24 @@ extern long vt_compat_ioctl(struct tty_struct *tty,
 /* functions for preparation of BKL removal */
 extern void __lockfunc tty_lock(void) __acquires(tty_lock);
 extern void __lockfunc tty_unlock(void) __releases(tty_lock);
-extern struct task_struct *__big_tty_mutex_owner;
-#define tty_locked()		(current == __big_tty_mutex_owner)
+
+/*
+ * this shall be called only from where BTM is held (like close)
+ *
+ * We need this to ensure nobody waits for us to finish while we are waiting.
+ * Without this we were encountering system stalls.
+ *
+ * This should be indeed removed with BTM removal later.
+ *
+ * Locking: BTM required. Nobody is allowed to hold port->mutex.
+ */
+static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
+		long timeout)
+{
+	tty_unlock(); /* tty->ops->close holds the BTM, drop it while waiting */
+	tty_wait_until_sent(tty, timeout);
+	tty_lock();
+}
 
 /*
  * wait_event_interruptible_tty -- wait for a condition with the tty lock held