Merge branch 'storage-mmc' into linux-stable-ux500-3.1

5 files changed, 134 insertions, 5 deletions

diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index 21114810c7c..23536c95fb6 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -6,6 +6,20 @@
 
 #include <linux/mmc/host.h>
 
+/*
+ * These defines is places here due to access is needed from machine
+ * configuration files.
+ *
+ * The ST Micro version does not have ROD and reuse the voltage registers
+ * for direction settings.
+ */
+#define MCI_ST_DATA2DIREN	(1 << 2)
+#define MCI_ST_CMDDIREN		(1 << 3)
+#define MCI_ST_DATA0DIREN	(1 << 4)
+#define MCI_ST_DATA31DIREN	(1 << 5)
+#define MCI_ST_FBCLKEN		(1 << 7)
+#define MCI_ST_DATA74DIREN	(1 << 8)
+
 /* Just some dummy forwarding */
 struct dma_chan;
 
@@ -18,7 +32,8 @@ struct dma_chan;
  * @ocr_mask: available voltages on the 4 pins from the block, this
  * is ignored if a regulator is used, see the MMC_VDD_* masks in
  * mmc/host.h
- * @vdd_handler: a callback function to translate a MMC_VDD_*
+ * @ios_handler: a callback function to act on specfic ios changes,
+ * used for example to control a levelshifter
  * mask into a value to be binary (or set some other custom bits
  * in MMCIPWR) or:ed and written into the MMCIPWR register of the
  * block.  May also control external power based on the power_mode.
@@ -30,6 +45,8 @@ struct dma_chan;
  * @cd_invert: true if the gpio_cd pin value is active low
  * @capabilities: the capabilities of the block as implemented in
  * this platform, signify anything MMC_CAP_* from mmc/host.h
+ * @sigdir: a bit field indicating for what bits in the MMC bus the host
+ * should enable signal direction indication.
  * @dma_filter: function used to select an appropriate RX and TX
  * DMA channel to be used for DMA, if and only if you're deploying the
  * generic DMA engine
@@ -45,13 +62,13 @@ struct dma_chan;
 struct mmci_platform_data {
 	unsigned int f_max;
 	unsigned int ocr_mask;
-	u32 (*vdd_handler)(struct device *, unsigned int vdd,
-			   unsigned char power_mode);
+	int (*ios_handler)(struct device *, struct mmc_ios *);
 	unsigned int (*status)(struct device *);
 	int	gpio_wp;
 	int	gpio_cd;
 	bool	cd_invert;
 	unsigned long capabilities;
+	unsigned int sigdir;
 	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
 	void *dma_rx_param;
 	void *dma_tx_param;
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index b460fc2af8a..dc20c5b6e5f 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -12,6 +12,7 @@
 
 #include <linux/mmc/core.h>
 #include <linux/mod_devicetable.h>
+#include <linux/genhd.h>
 
 struct mmc_cid {
 	unsigned int		manfid;
@@ -50,8 +51,10 @@ struct mmc_ext_csd {
 	u8			rel_sectors;
 	u8			rel_param;
 	u8			part_config;
+	u8			rst_n_function;
 	unsigned int		part_time;		/* Units: ms */
 	unsigned int		sa_timeout;		/* Units: 100ns */
+	unsigned int		generic_cmd6_time;	/* Units: 10ms */
 	unsigned int		hs_max_dtr;
 	unsigned int		sectors;
 	unsigned int		card_type;
@@ -63,7 +66,7 @@ struct mmc_ext_csd {
 	bool			enhanced_area_en;	/* enable bit */
 	unsigned long long	enhanced_area_offset;	/* Units: Byte */
 	unsigned int		enhanced_area_size;	/* Units: KB */
-	unsigned int		boot_size;		/* in bytes */
+	unsigned int		boot_locked;
 	u8			raw_partition_support;	/* 160 */
 	u8			raw_erased_mem_count;	/* 181 */
 	u8			raw_ext_csd_structure;	/* 194 */
@@ -157,6 +160,32 @@ struct sdio_func_tuple;
 
 #define SDIO_MAX_FUNCS		7
 
+/* The number of MMC physical partitions.  These consist of:
+ * boot partitions (2), general purpose partitions (4) in MMC v4.4.
+ */
+#define MMC_NUM_BOOT_PARTITION	2
+#define MMC_NUM_GP_PARTITION	4
+#define MMC_NUM_PHY_PARTITION	6
+
+/*
+ * Partition area type, boot or gp
+ */
+enum mmc_part_area_type {
+	MMC_BLK_DATA_AREA_BOOT,
+	MMC_BLK_DATA_AREA_GP,
+};
+
+/*
+ * MMC Physical partitions
+ */
+struct mmc_part {
+	unsigned int	size;	/* partition size (in bytes) */
+	unsigned int	part_cfg;	/* partition type */ 
+	char	name[DISK_NAME_LEN];
+	bool	force_ro;	/* to make boot parts RO by default */
+	int	area_type;
+};
+
 /*
  * MMC device
  */
@@ -188,6 +217,7 @@ struct mmc_card {
 #define MMC_QUIRK_DISABLE_CD	(1<<5)		/* disconnect CD/DAT[3] resistor */
 #define MMC_QUIRK_INAND_CMD38	(1<<6)		/* iNAND devices have broken CMD38 */
 #define MMC_QUIRK_BLK_NO_CMD23	(1<<7)		/* Avoid CMD23 for regular multiblock */
+#define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8)	/* Avoid sending 512 bytes in byte mode */
 
 	unsigned int		erase_size;	/* erase size in sectors */
  	unsigned int		erase_shift;	/* if erase unit is power 2 */
@@ -216,9 +246,26 @@ struct mmc_card {
 	unsigned int		sd_bus_speed;	/* Bus Speed Mode set for the card */
 
 	struct dentry		*debugfs_root;
+	struct mmc_part	part[MMC_NUM_PHY_PARTITION]; /* physical partitions */
+	unsigned int    nr_parts;
 };
 
 /*
+ * This function fill contents in mmc_part.
+ */
+static inline void mmc_part_add(struct mmc_card *card, unsigned int size,
+			unsigned int part_cfg, char *name, int idx, bool ro,
+			int area_type)
+{
+	card->part[card->nr_parts].size = size;
+	card->part[card->nr_parts].part_cfg = part_cfg;
+	sprintf(card->part[card->nr_parts].name, name, idx);
+	card->part[card->nr_parts].force_ro = ro;
+	card->part[card->nr_parts].area_type = area_type;
+	card->nr_parts++;
+}
+
+/*
  *  The world is not perfect and supplies us with broken mmc/sdio devices.
  *  For at least some of these bugs we need a work-around.
  */
@@ -377,6 +424,11 @@ static inline int mmc_card_nonstd_func_interface(const struct mmc_card *c)
 	return c->quirks & MMC_QUIRK_NONSTD_FUNC_IF;
 }
 
+static inline int mmc_card_broken_byte_mode_512(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_BROKEN_BYTE_MODE_512;
+}
+
 #define mmc_card_name(c)	((c)->cid.prod_name)
 #define mmc_card_id(c)		(dev_name(&(c)->dev))
 
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index b8b1b7a311f..56e5625b6f4 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -162,6 +162,9 @@ extern int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
 extern unsigned int mmc_calc_max_discard(struct mmc_card *card);
 
 extern int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen);
+extern int mmc_hw_reset(struct mmc_host *host);
+extern int mmc_hw_reset_check(struct mmc_host *host);
+extern int mmc_can_reset(struct mmc_card *card);
 
 extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
 extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 1d09562ccf7..79117a252f0 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -12,6 +12,7 @@
 
 #include <linux/leds.h>
 #include <linux/sched.h>
+#include <linux/fault-inject.h>
 
 #include <linux/mmc/core.h>
 #include <linux/mmc/pm.h>
@@ -108,6 +109,9 @@ struct mmc_host_ops {
 	 * It is optional for the host to implement pre_req and post_req in
 	 * order to support double buffering of requests (prepare one
 	 * request while another request is active).
+	 * pre_req() must always be followed by a post_req().
+	 * To undo a call made to pre_req(), call post_req() with
+	 * a nonzero err condition.
 	 */
 	void	(*post_req)(struct mmc_host *host, struct mmc_request *req,
 			    int err);
@@ -147,6 +151,7 @@ struct mmc_host_ops {
 	int	(*execute_tuning)(struct mmc_host *host);
 	void	(*enable_preset_value)(struct mmc_host *host, bool enable);
 	int	(*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv);
+	void	(*hw_reset)(struct mmc_host *host);
 };
 
 struct mmc_card;
@@ -229,6 +234,11 @@ struct mmc_host {
 #define MMC_CAP_MAX_CURRENT_600	(1 << 28)	/* Host max current limit is 600mA */
 #define MMC_CAP_MAX_CURRENT_800	(1 << 29)	/* Host max current limit is 800mA */
 #define MMC_CAP_CMD23		(1 << 30)	/* CMD23 supported. */
+#define MMC_CAP_HW_RESET	(1 << 31)	/* Hardware reset */
+
+	unsigned int		caps2;		/* More host capabilities */
+
+#define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
@@ -302,6 +312,19 @@ struct mmc_host {
 
 	struct mmc_async_req	*areq;		/* active async req */
 
+#ifdef CONFIG_FAIL_MMC_REQUEST
+	struct fault_attr	fail_mmc_request;
+#endif
+
+#ifdef CONFIG_MMC_EMBEDDED_SDIO
+	struct {
+		struct sdio_cis			*cis;
+		struct sdio_cccr		*cccr;
+		struct sdio_embedded_func	*funcs;
+		int				num_funcs;
+	} embedded_sdio_data;
+#endif
+
 	unsigned long		private[0] ____cacheline_aligned;
 };
 
@@ -394,4 +417,10 @@ static inline int mmc_host_cmd23(struct mmc_host *host)
 {
 	return host->caps & MMC_CAP_CMD23;
 }
+
+static inline int mmc_boot_partition_access(struct mmc_host *host)
+{
+	return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
+}
+
 #endif /* LINUX_MMC_HOST_H */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 5a794cb503e..dc884f60798 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -270,18 +270,26 @@ struct _mmc_csd {
  * EXT_CSD fields
  */
 
+#define EXT_CSD_GP_SIZE_MULT		143	/* R/W */
 #define EXT_CSD_PARTITION_ATTRIBUTE	156	/* R/W */
 #define EXT_CSD_PARTITION_SUPPORT	160	/* RO */
+#define EXT_CSD_RST_N_FUNCTION		162	/* R/W */
 #define EXT_CSD_WR_REL_PARAM		166	/* RO */
+#define EXT_CSD_BOOT_WP			173	/* R/W */
 #define EXT_CSD_ERASE_GROUP_DEF		175	/* R/W */
 #define EXT_CSD_PART_CONFIG		179	/* R/W */
 #define EXT_CSD_ERASED_MEM_CONT		181	/* RO */
 #define EXT_CSD_BUS_WIDTH		183	/* R/W */
 #define EXT_CSD_HS_TIMING		185	/* R/W */
+#define EXT_CSD_POWER_CLASS		187	/* R/W */
 #define EXT_CSD_REV			192	/* RO */
 #define EXT_CSD_STRUCTURE		194	/* RO */
 #define EXT_CSD_CARD_TYPE		196	/* RO */
 #define EXT_CSD_PART_SWITCH_TIME        199     /* RO */
+#define EXT_CSD_PWR_CL_52_195		200	/* RO */
+#define EXT_CSD_PWR_CL_26_195		201	/* RO */
+#define EXT_CSD_PWR_CL_52_360		202	/* RO */
+#define EXT_CSD_PWR_CL_26_360		203	/* RO */
 #define EXT_CSD_SEC_CNT			212	/* RO, 4 bytes */
 #define EXT_CSD_S_A_TIMEOUT		217	/* RO */
 #define EXT_CSD_REL_WR_SEC_C		222	/* RO */
@@ -293,6 +301,12 @@ struct _mmc_csd {
 #define EXT_CSD_SEC_ERASE_MULT		230	/* RO */
 #define EXT_CSD_SEC_FEATURE_SUPPORT	231	/* RO */
 #define EXT_CSD_TRIM_MULT		232	/* RO */
+#define EXT_CSD_PWR_CL_200_195		236	/* RO */
+#define EXT_CSD_PWR_CL_200_360		237	/* RO */
+#define EXT_CSD_PWR_CL_DDR_52_195	238	/* RO */
+#define EXT_CSD_PWR_CL_DDR_52_360	239	/* RO */
+#define EXT_CSD_POWER_OFF_LONG_TIME	247	/* RO */
+#define EXT_CSD_GENERIC_CMD6_TIME	248	/* RO */
 
 /*
  * EXT_CSD field definitions
@@ -300,9 +314,16 @@ struct _mmc_csd {
 
 #define EXT_CSD_WR_REL_PARAM_EN		(1<<2)
 
+#define EXT_CSD_BOOT_WP_B_PWR_WP_DIS	(0x40)
+#define EXT_CSD_BOOT_WP_B_PERM_WP_DIS	(0x10)
+#define EXT_CSD_BOOT_WP_B_PERM_WP_EN	(0x04)
+#define EXT_CSD_BOOT_WP_B_PWR_WP_EN	(0x01)
+
 #define EXT_CSD_PART_CONFIG_ACC_MASK	(0x7)
 #define EXT_CSD_PART_CONFIG_ACC_BOOT0	(0x1)
-#define EXT_CSD_PART_CONFIG_ACC_BOOT1	(0x2)
+#define EXT_CSD_PART_CONFIG_ACC_GP0	(0x4)
+
+#define EXT_CSD_PART_SUPPORT_PART_EN	(0x1)
 
 #define EXT_CSD_CMD_SET_NORMAL		(1<<0)
 #define EXT_CSD_CMD_SET_SECURE		(1<<1)
@@ -328,6 +349,13 @@ struct _mmc_csd {
 #define EXT_CSD_SEC_BD_BLK_EN	BIT(2)
 #define EXT_CSD_SEC_GB_CL_EN	BIT(4)
 
+#define EXT_CSD_RST_N_EN_MASK	0x3
+#define EXT_CSD_RST_N_ENABLED	1	/* RST_n is enabled on card */
+
+#define EXT_CSD_PWR_CL_8BIT_MASK	0xF0	/* 8 bit PWR CLS */
+#define EXT_CSD_PWR_CL_4BIT_MASK	0x0F	/* 8 bit PWR CLS */
+#define EXT_CSD_PWR_CL_8BIT_SHIFT	4
+#define EXT_CSD_PWR_CL_4BIT_SHIFT	0
 /*
  * MMC_SWITCH access modes
  */