diff options
author | Philippe Langlais <philippe.langlais@linaro.org> | 2011-07-05 14:40:21 +0200 |
---|---|---|
committer | Philippe Langlais <philippe.langlais@linaro.org> | 2011-07-22 15:51:08 +0200 |
commit | 1b91ff8943719a129cfc33bc9646b3a6122937b3 (patch) | |
tree | 8cc79140377f3946c61070be6410f313833a4fab /include | |
parent | 9f36e7110eb201aafcd60c16d617d139db7fabbb (diff) |
ux500: fix PRCMU boot problem, use new MFD driver & code cleanup
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
Diffstat (limited to 'include')
-rw-r--r-- | include/linux/mfd/db5500-prcmu.h | 17 | ||||
-rw-r--r-- | include/linux/mfd/db8500-prcmu.h | 222 |
2 files changed, 20 insertions, 219 deletions
diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h index f0977986402..0d26f72230e 100644 --- a/include/linux/mfd/db5500-prcmu.h +++ b/include/linux/mfd/db5500-prcmu.h @@ -15,6 +15,18 @@ void db5500_prcmu_early_init(void); int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); +int db5500_prcmu_request_clock(u8 clock, bool enable); + +int prcmu_resetout(u8 resoutn, u8 state); + +static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk, + bool keep_ap_pll) +{ + return 0; +} + +static inline void prcmu_system_reset(u16 reset_code) {} + #else /* !CONFIG_UX500_SOC_DB5500 */ static inline void db5500_prcmu_early_init(void) @@ -31,6 +43,11 @@ static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) return -ENOSYS; } +static inline int prcmu_resetout(u8 resoutn, u8 state) +{ + return 0; +} + #endif /* CONFIG_UX500_SOC_DB5500 */ static inline int db5500_prcmu_config_abb_event_readout(u32 abb_events) diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index f56d1171269..b07b8159195 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -11,7 +11,6 @@ #define __MFD_DB8500_PRCMU_H #include <linux/interrupt.h> -#include <linux/notifier.h> /* This portion previously known as <mach/prcmu-fw-defs_v1.h> */ @@ -133,7 +132,7 @@ enum ap_pwrst { * @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle */ enum ap_pwrst_trans { - NO_TRANSITION = 0x00, + PRCMU_AP_NO_CHANGE = 0x00, APEXECUTE_TO_APSLEEP = 0x01, APIDLE_TO_APSLEEP = 0x02, /* To be removed */ PRCMU_AP_SLEEP = 0x01, @@ -160,40 +159,6 @@ enum ddr_pwrst { }; /** - * enum arm_opp - ARM OPP states definition - * @ARM_OPP_INIT: - * @ARM_NO_CHANGE: The ARM operating point is unchanged - * @ARM_100_OPP: The new ARM operating point is arm100opp - * @ARM_50_OPP: The new ARM operating point is arm50opp - * @ARM_MAX_OPP: Operating point is "max" (more than 100) - * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100 - * @ARM_EXTCLK: The new ARM operating point is armExtClk - */ -enum arm_opp { - ARM_OPP_INIT = 0x00, - ARM_NO_CHANGE = 0x01, - ARM_100_OPP = 0x02, - ARM_50_OPP = 0x03, - ARM_MAX_OPP = 0x04, - ARM_MAX_FREQ100OPP = 0x05, - ARM_EXTCLK = 0x07 -}; - -/** - * enum ape_opp - APE OPP states definition - * @APE_OPP_INIT: - * @APE_NO_CHANGE: The APE operating point is unchanged - * @APE_100_OPP: The new APE operating point is ape100opp - * @APE_50_OPP: 50% - */ -enum ape_opp { - APE_OPP_INIT = 0x00, - APE_NO_CHANGE = 0x01, - APE_100_OPP = 0x02, - APE_50_OPP = 0x03 -}; - -/** * enum hw_acc_state - State definition for hardware accelerator * @HW_NO_CHANGE: The hardware accelerator state must remain unchanged * @HW_OFF: The hardware accelerator must be switched off @@ -469,26 +434,6 @@ enum auto_enable { /* End of file previously known as prcmu-fw-defs_v1.h */ -/* PRCMU Wakeup defines */ -enum prcmu_wakeup_index { - PRCMU_WAKEUP_INDEX_RTC, - PRCMU_WAKEUP_INDEX_RTT0, - PRCMU_WAKEUP_INDEX_RTT1, - PRCMU_WAKEUP_INDEX_HSI0, - PRCMU_WAKEUP_INDEX_HSI1, - PRCMU_WAKEUP_INDEX_USB, - PRCMU_WAKEUP_INDEX_ABB, - PRCMU_WAKEUP_INDEX_ABB_FIFO, - PRCMU_WAKEUP_INDEX_ARM, - NUM_PRCMU_WAKEUP_INDICES -}; -#define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name)) - -/* PRCMU QoS APE OPP class */ -#define PRCMU_QOS_APE_OPP 1 -#define PRCMU_QOS_DDR_OPP 2 -#define PRCMU_QOS_DEFAULT_VALUE -1 - /** * enum hw_acc_dev - enum for hw accelerators * @HW_ACC_SVAMMDSP: for SVAMMDSP @@ -527,64 +472,6 @@ enum hw_acc_dev { }; /* - * Ids for all EPODs (power domains) - * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP - * - EPOD_ID_SVAPIPE: power domain for SVA pipe - * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP - * - EPOD_ID_SIAPIPE: power domain for SIA pipe - * - EPOD_ID_SGA: power domain for SGA - * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE - * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2 - * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4 - * - NUM_EPOD_ID: number of power domains - */ -#define EPOD_ID_SVAMMDSP 0 -#define EPOD_ID_SVAPIPE 1 -#define EPOD_ID_SIAMMDSP 2 -#define EPOD_ID_SIAPIPE 3 -#define EPOD_ID_SGA 4 -#define EPOD_ID_B2R2_MCDE 5 -#define EPOD_ID_ESRAM12 6 -#define EPOD_ID_ESRAM34 7 -#define NUM_EPOD_ID 8 - -/* - * state definition for EPOD (power domain) - * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged - * - EPOD_STATE_OFF: The EPOD is switched off - * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in - * retention - * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off - * - EPOD_STATE_ON: Same as above, but with clock enabled - */ -#define EPOD_STATE_NO_CHANGE 0x00 -#define EPOD_STATE_OFF 0x01 -#define EPOD_STATE_RAMRET 0x02 -#define EPOD_STATE_ON_CLK_OFF 0x03 -#define EPOD_STATE_ON 0x04 - -/* - * CLKOUT sources - */ -#define PRCMU_CLKSRC_CLK38M 0x00 -#define PRCMU_CLKSRC_ACLK 0x01 -#define PRCMU_CLKSRC_SYSCLK 0x02 -#define PRCMU_CLKSRC_LCDCLK 0x03 -#define PRCMU_CLKSRC_SDMMCCLK 0x04 -#define PRCMU_CLKSRC_TVCLK 0x05 -#define PRCMU_CLKSRC_TIMCLK 0x06 -#define PRCMU_CLKSRC_CLK009 0x07 -/* These are only valid for CLKOUT1: */ -#define PRCMU_CLKSRC_SIAMMDSPCLK 0x40 -#define PRCMU_CLKSRC_I2CCLK 0x41 -#define PRCMU_CLKSRC_MSP02CLK 0x42 -#define PRCMU_CLKSRC_ARMPLL_OBSCLK 0x43 -#define PRCMU_CLKSRC_HSIRXCLK 0x44 -#define PRCMU_CLKSRC_HSITXCLK 0x45 -#define PRCMU_CLKSRC_ARMCLKFIX 0x46 -#define PRCMU_CLKSRC_HDMICLK 0x47 - -/* * Definitions for autonomous power management configuration. */ @@ -620,59 +507,6 @@ struct prcmu_auto_pm_config { u8 sva_policy; }; -/** - * enum ddr_opp - DDR OPP states definition - * @DDR_100_OPP: The new DDR operating point is ddr100opp - * @DDR_50_OPP: The new DDR operating point is ddr50opp - * @DDR_25_OPP: The new DDR operating point is ddr25opp - */ -enum ddr_opp { - DDR_100_OPP = 0x00, - DDR_50_OPP = 0x01, - DDR_25_OPP = 0x02, -}; - -/* - * Clock identifiers. - */ -enum prcmu_clock { - PRCMU_SGACLK, - PRCMU_UARTCLK, - PRCMU_MSP02CLK, - PRCMU_MSP1CLK, - PRCMU_I2CCLK, - PRCMU_SDMMCCLK, - PRCMU_SLIMCLK, - PRCMU_PER1CLK, - PRCMU_PER2CLK, - PRCMU_PER3CLK, - PRCMU_PER5CLK, - PRCMU_PER6CLK, - PRCMU_PER7CLK, - PRCMU_LCDCLK, - PRCMU_BMLCLK, - PRCMU_HSITXCLK, - PRCMU_HSIRXCLK, - PRCMU_HDMICLK, - PRCMU_APEATCLK, - PRCMU_APETRACECLK, - PRCMU_MCDECLK, - PRCMU_IPI2CCLK, - PRCMU_DSIALTCLK, - PRCMU_DMACLK, - PRCMU_B2R2CLK, - PRCMU_TVCLK, - PRCMU_SSPCLK, - PRCMU_RNGCLK, - PRCMU_UICCCLK, - PRCMU_NUM_REG_CLOCKS, - PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS, - PRCMU_TIMCLK, - PRCMU_PLLSOC0, - PRCMU_PLLSOC1, - PRCMU_PLLDDR, -}; - /* * Definitions for controlling ESRAM0 in deep sleep. */ @@ -694,13 +528,7 @@ int prcmu_set_rc_a2p(enum romcode_write); enum romcode_read prcmu_get_rc_p2a(void); enum ap_pwrst prcmu_get_xp70_current_state(void); int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll); - void prcmu_enable_wakeups(u32 wakeups); -static inline void prcmu_disable_wakeups(void) -{ - prcmu_enable_wakeups(0); -} - void prcmu_config_abb_event_readout(u32 abb_events); void prcmu_get_abb_event_buffer(void __iomem **buf); int prcmu_set_arm_opp(u8 opp); @@ -780,12 +608,12 @@ static inline int prcmu_get_arm_opp(void) return ARM_100_OPP; } -static bool prcmu_has_arm_maxopp(void) +static inline bool prcmu_has_arm_maxopp(void) { return false; } -static bool prcmu_is_u8400(void) +static inline bool prcmu_is_u8400(void) { return false; } @@ -934,48 +762,4 @@ static inline int prcmu_disable_spi2(void) #endif /* !CONFIG_MFD_DB8500_PRCMU */ -#ifdef CONFIG_UX500_PRCMU_QOS_POWER -int prcmu_qos_requirement(int pm_qos_class); -int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value); -int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value); -void prcmu_qos_remove_requirement(int pm_qos_class, char *name); -int prcmu_qos_add_notifier(int prcmu_qos_class, - struct notifier_block *notifier); -int prcmu_qos_remove_notifier(int prcmu_qos_class, - struct notifier_block *notifier); -#else -static inline int prcmu_qos_requirement(int prcmu_qos_class) -{ - return 0; -} - -static inline int prcmu_qos_add_requirement(int prcmu_qos_class, - char *name, s32 value) -{ - return 0; -} - -static inline int prcmu_qos_update_requirement(int prcmu_qos_class, - char *name, s32 new_value) -{ - return 0; -} - -static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name) -{ -} - -static inline int prcmu_qos_add_notifier(int prcmu_qos_class, - struct notifier_block *notifier) -{ - return 0; -} -static inline int prcmu_qos_remove_notifier(int prcmu_qos_class, - struct notifier_block *notifier) -{ - return 0; -} - -#endif - #endif /* __MFD_DB8500_PRCMU_H */ |