dsa: Move switch drivers to new directory drivers/net/dsa

Support for specific hardware belongs under drivers/net/ not net/.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 files changed, 1 insertions, 1859 deletions

diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 7e12303827e..274791cd7a3 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -1,4 +1,4 @@
-menuconfig NET_DSA
+config NET_DSA
 	tristate "Distributed Switch Architecture support"
 	default n
 	depends on EXPERIMENTAL && NETDEVICES && !S390
@@ -23,38 +23,4 @@ config NET_DSA_TAG_TRAILER
 	bool
 	default n
 
-
-# switch drivers
-config NET_DSA_MV88E6XXX
-	tristate
-	default n
-
-config NET_DSA_MV88E6060
-	tristate "Marvell 88E6060 ethernet switch chip support"
-	select NET_DSA_TAG_TRAILER
-	---help---
-	  This enables support for the Marvell 88E6060 ethernet switch
-	  chip.
-
-config NET_DSA_MV88E6XXX_NEED_PPU
-	bool
-	default n
-
-config NET_DSA_MV88E6131
-	tristate "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support"
-	select NET_DSA_MV88E6XXX
-	select NET_DSA_MV88E6XXX_NEED_PPU
-	select NET_DSA_TAG_DSA
-	---help---
-	  This enables support for the Marvell 88E6085/6095/6095F/6131
-	  ethernet switch chips.
-
-config NET_DSA_MV88E6123_61_65
-	tristate "Marvell 88E6123/6161/6165 ethernet switch chip support"
-	select NET_DSA_MV88E6XXX
-	select NET_DSA_TAG_EDSA
-	---help---
-	  This enables support for the Marvell 88E6123/6161/6165
-	  ethernet switch chips.
-
 endif
diff --git a/net/dsa/Makefile b/net/dsa/Makefile
index 191dd482e55..7b9fcbbeda5 100644
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -6,14 +6,3 @@ dsa_core-y += dsa.o slave.o
 dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
 dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
 dsa_core-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
-
-# switch drivers
-obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
-obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
-mv88e6xxx_drv-y += mv88e6xxx.o
-ifdef CONFIG_NET_DSA_MV88E6123_61_65
-mv88e6xxx_drv-y += mv88e6123_61_65.o
-endif
-ifdef CONFIG_NET_DSA_MV88E6131
-mv88e6xxx_drv-y += mv88e6131.o
-endif
diff --git a/net/dsa/mv88e6060.c b/net/dsa/mv88e6060.c
deleted file mode 100644
index 7fc4e81d4d4..00000000000
--- a/net/dsa/mv88e6060.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
- * Copyright (c) 2008-2009 Marvell Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/list.h>
-#include <linux/netdevice.h>
-#include <linux/phy.h>
-#include <net/dsa.h>
-
-#define REG_PORT(p)		(8 + (p))
-#define REG_GLOBAL		0x0f
-
-static int reg_read(struct dsa_switch *ds, int addr, int reg)
-{
-	return mdiobus_read(ds->master_mii_bus, ds->pd->sw_addr + addr, reg);
-}
-
-#define REG_READ(addr, reg)					\
-	({							\
-		int __ret;					\
-								\
-		__ret = reg_read(ds, addr, reg);		\
-		if (__ret < 0)					\
-			return __ret;				\
-		__ret;						\
-	})
-
-
-static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
-{
-	return mdiobus_write(ds->master_mii_bus, ds->pd->sw_addr + addr,
-			     reg, val);
-}
-
-#define REG_WRITE(addr, reg, val)				\
-	({							\
-		int __ret;					\
-								\
-		__ret = reg_write(ds, addr, reg, val);		\
-		if (__ret < 0)					\
-			return __ret;				\
-	})
-
-static char *mv88e6060_probe(struct mii_bus *bus, int sw_addr)
-{
-	int ret;
-
-	ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03);
-	if (ret >= 0) {
-		ret &= 0xfff0;
-		if (ret == 0x0600)
-			return "Marvell 88E6060";
-	}
-
-	return NULL;
-}
-
-static int mv88e6060_switch_reset(struct dsa_switch *ds)
-{
-	int i;
-	int ret;
-
-	/*
-	 * Set all ports to the disabled state.
-	 */
-	for (i = 0; i < 6; i++) {
-		ret = REG_READ(REG_PORT(i), 0x04);
-		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
-	}
-
-	/*
-	 * Wait for transmit queues to drain.
-	 */
-	msleep(2);
-
-	/*
-	 * Reset the switch.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
-
-	/*
-	 * Wait up to one second for reset to complete.
-	 */
-	for (i = 0; i < 1000; i++) {
-		ret = REG_READ(REG_GLOBAL, 0x00);
-		if ((ret & 0x8000) == 0x0000)
-			break;
-
-		msleep(1);
-	}
-	if (i == 1000)
-		return -ETIMEDOUT;
-
-	return 0;
-}
-
-static int mv88e6060_setup_global(struct dsa_switch *ds)
-{
-	/*
-	 * Disable discarding of frames with excessive collisions,
-	 * set the maximum frame size to 1536 bytes, and mask all
-	 * interrupt sources.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
-
-	/*
-	 * Enable automatic address learning, set the address
-	 * database size to 1024 entries, and set the default aging
-	 * time to 5 minutes.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
-
-	return 0;
-}
-
-static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
-{
-	int addr = REG_PORT(p);
-
-	/*
-	 * Do not force flow control, disable Ingress and Egress
-	 * Header tagging, disable VLAN tunneling, and set the port
-	 * state to Forwarding.  Additionally, if this is the CPU
-	 * port, enable Ingress and Egress Trailer tagging mode.
-	 */
-	REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ?  0x4103 : 0x0003);
-
-	/*
-	 * Port based VLAN map: give each port its own address
-	 * database, allow the CPU port to talk to each of the 'real'
-	 * ports, and allow each of the 'real' ports to only talk to
-	 * the CPU port.
-	 */
-	REG_WRITE(addr, 0x06,
-			((p & 0xf) << 12) |
-			 (dsa_is_cpu_port(ds, p) ?
-				ds->phys_port_mask :
-				(1 << ds->dst->cpu_port)));
-
-	/*
-	 * Port Association Vector: when learning source addresses
-	 * of packets, add the address to the address database using
-	 * a port bitmap that has only the bit for this port set and
-	 * the other bits clear.
-	 */
-	REG_WRITE(addr, 0x0b, 1 << p);
-
-	return 0;
-}
-
-static int mv88e6060_setup(struct dsa_switch *ds)
-{
-	int i;
-	int ret;
-
-	ret = mv88e6060_switch_reset(ds);
-	if (ret < 0)
-		return ret;
-
-	/* @@@ initialise atu */
-
-	ret = mv88e6060_setup_global(ds);
-	if (ret < 0)
-		return ret;
-
-	for (i = 0; i < 6; i++) {
-		ret = mv88e6060_setup_port(ds, i);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
-{
-	REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
-	REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
-	REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
-
-	return 0;
-}
-
-static int mv88e6060_port_to_phy_addr(int port)
-{
-	if (port >= 0 && port <= 5)
-		return port;
-	return -1;
-}
-
-static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
-{
-	int addr;
-
-	addr = mv88e6060_port_to_phy_addr(port);
-	if (addr == -1)
-		return 0xffff;
-
-	return reg_read(ds, addr, regnum);
-}
-
-static int
-mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
-{
-	int addr;
-
-	addr = mv88e6060_port_to_phy_addr(port);
-	if (addr == -1)
-		return 0xffff;
-
-	return reg_write(ds, addr, regnum, val);
-}
-
-static void mv88e6060_poll_link(struct dsa_switch *ds)
-{
-	int i;
-
-	for (i = 0; i < DSA_MAX_PORTS; i++) {
-		struct net_device *dev;
-		int uninitialized_var(port_status);
-		int link;
-		int speed;
-		int duplex;
-		int fc;
-
-		dev = ds->ports[i];
-		if (dev == NULL)
-			continue;
-
-		link = 0;
-		if (dev->flags & IFF_UP) {
-			port_status = reg_read(ds, REG_PORT(i), 0x00);
-			if (port_status < 0)
-				continue;
-
-			link = !!(port_status & 0x1000);
-		}
-
-		if (!link) {
-			if (netif_carrier_ok(dev)) {
-				printk(KERN_INFO "%s: link down\n", dev->name);
-				netif_carrier_off(dev);
-			}
-			continue;
-		}
-
-		speed = (port_status & 0x0100) ? 100 : 10;
-		duplex = (port_status & 0x0200) ? 1 : 0;
-		fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
-
-		if (!netif_carrier_ok(dev)) {
-			printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
-					 "flow control %sabled\n", dev->name,
-					 speed, duplex ? "full" : "half",
-					 fc ? "en" : "dis");
-			netif_carrier_on(dev);
-		}
-	}
-}
-
-static struct dsa_switch_driver mv88e6060_switch_driver = {
-	.tag_protocol	= htons(ETH_P_TRAILER),
-	.probe		= mv88e6060_probe,
-	.setup		= mv88e6060_setup,
-	.set_addr	= mv88e6060_set_addr,
-	.phy_read	= mv88e6060_phy_read,
-	.phy_write	= mv88e6060_phy_write,
-	.poll_link	= mv88e6060_poll_link,
-};
-
-static int __init mv88e6060_init(void)
-{
-	register_switch_driver(&mv88e6060_switch_driver);
-	return 0;
-}
-module_init(mv88e6060_init);
-
-static void __exit mv88e6060_cleanup(void)
-{
-	unregister_switch_driver(&mv88e6060_switch_driver);
-}
-module_exit(mv88e6060_cleanup);
-
-MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
-MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:mv88e6060");
diff --git a/net/dsa/mv88e6123_61_65.c b/net/dsa/mv88e6123_61_65.c
deleted file mode 100644
index c0a458fc698..00000000000
--- a/net/dsa/mv88e6123_61_65.c
+++ /dev/null
@@ -1,438 +0,0 @@
-/*
- * net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support
- * Copyright (c) 2008-2009 Marvell Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/list.h>
-#include <linux/netdevice.h>
-#include <linux/phy.h>
-#include <net/dsa.h>
-#include "mv88e6xxx.h"
-
-static char *mv88e6123_61_65_probe(struct mii_bus *bus, int sw_addr)
-{
-	int ret;
-
-	ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
-	if (ret >= 0) {
-		ret &= 0xfff0;
-		if (ret == 0x1210)
-			return "Marvell 88E6123";
-		if (ret == 0x1610)
-			return "Marvell 88E6161";
-		if (ret == 0x1650)
-			return "Marvell 88E6165";
-	}
-
-	return NULL;
-}
-
-static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds)
-{
-	int i;
-	int ret;
-
-	/*
-	 * Set all ports to the disabled state.
-	 */
-	for (i = 0; i < 8; i++) {
-		ret = REG_READ(REG_PORT(i), 0x04);
-		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
-	}
-
-	/*
-	 * Wait for transmit queues to drain.
-	 */
-	msleep(2);
-
-	/*
-	 * Reset the switch.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
-
-	/*
-	 * Wait up to one second for reset to complete.
-	 */
-	for (i = 0; i < 1000; i++) {
-		ret = REG_READ(REG_GLOBAL, 0x00);
-		if ((ret & 0xc800) == 0xc800)
-			break;
-
-		msleep(1);
-	}
-	if (i == 1000)
-		return -ETIMEDOUT;
-
-	return 0;
-}
-
-static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
-{
-	int ret;
-	int i;
-
-	/*
-	 * Disable the PHY polling unit (since there won't be any
-	 * external PHYs to poll), don't discard packets with
-	 * excessive collisions, and mask all interrupt sources.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x04, 0x0000);
-
-	/*
-	 * Set the default address aging time to 5 minutes, and
-	 * enable address learn messages to be sent to all message
-	 * ports.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
-
-	/*
-	 * Configure the priority mapping registers.
-	 */
-	ret = mv88e6xxx_config_prio(ds);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * Configure the upstream port, and configure the upstream
-	 * port as the port to which ingress and egress monitor frames
-	 * are to be sent.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
-
-	/*
-	 * Disable remote management for now, and set the switch's
-	 * DSA device number.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
-
-	/*
-	 * Send all frames with destination addresses matching
-	 * 01:80:c2:00:00:2x to the CPU port.
-	 */
-	REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
-
-	/*
-	 * Send all frames with destination addresses matching
-	 * 01:80:c2:00:00:0x to the CPU port.
-	 */
-	REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
-
-	/*
-	 * Disable the loopback filter, disable flow control
-	 * messages, disable flood broadcast override, disable
-	 * removing of provider tags, disable ATU age violation
-	 * interrupts, disable tag flow control, force flow
-	 * control priority to the highest, and send all special
-	 * multicast frames to the CPU at the highest priority.
-	 */
-	REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
-
-	/*
-	 * Program the DSA routing table.
-	 */
-	for (i = 0; i < 32; i++) {
-		int nexthop;
-
-		nexthop = 0x1f;
-		if (i != ds->index && i < ds->dst->pd->nr_chips)
-			nexthop = ds->pd->rtable[i] & 0x1f;
-
-		REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
-	}
-
-	/*
-	 * Clear all trunk masks.
-	 */
-	for (i = 0; i < 8; i++)
-		REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
-
-	/*
-	 * Clear all trunk mappings.
-	 */
-	for (i = 0; i < 16; i++)
-		REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
-
-	/*
-	 * Disable ingress rate limiting by resetting all ingress
-	 * rate limit registers to their initial state.
-	 */
-	for (i = 0; i < 6; i++)
-		REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
-
-	/*
-	 * Initialise cross-chip port VLAN table to reset defaults.
-	 */
-	REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
-
-	/*
-	 * Clear the priority override table.
-	 */
-	for (i = 0; i < 16; i++)
-		REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
-
-	/* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
-
-	return 0;
-}
-
-static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
-{
-	int addr = REG_PORT(p);
-	u16 val;
-
-	/*
-	 * MAC Forcing register: don't force link, speed, duplex
-	 * or flow control state to any particular values on physical
-	 * ports, but force the CPU port and all DSA ports to 1000 Mb/s
-	 * full duplex.
-	 */
-	if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
-		REG_WRITE(addr, 0x01, 0x003e);
-	else
-		REG_WRITE(addr, 0x01, 0x0003);
-
-	/*
-	 * Do not limit the period of time that this port can be
-	 * paused for by the remote end or the period of time that
-	 * this port can pause the remote end.
-	 */
-	REG_WRITE(addr, 0x02, 0x0000);
-
-	/*
-	 * Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
-	 * disable Header mode, enable IGMP/MLD snooping, disable VLAN
-	 * tunneling, determine priority by looking at 802.1p and IP
-	 * priority fields (IP prio has precedence), and set STP state
-	 * to Forwarding.
-	 *
-	 * If this is the CPU link, use DSA or EDSA tagging depending
-	 * on which tagging mode was configured.
-	 *
-	 * If this is a link to another switch, use DSA tagging mode.
-	 *
-	 * If this is the upstream port for this switch, enable
-	 * forwarding of unknown unicasts and multicasts.
-	 */
-	val = 0x0433;
-	if (dsa_is_cpu_port(ds, p)) {
-		if (ds->dst->tag_protocol == htons(ETH_P_EDSA))
-			val |= 0x3300;
-		else
-			val |= 0x0100;
-	}
-	if (ds->dsa_port_mask & (1 << p))
-		val |= 0x0100;
-	if (p == dsa_upstream_port(ds))
-		val |= 0x000c;
-	REG_WRITE(addr, 0x04, val);
-
-	/*
-	 * Port Control 1: disable trunking.  Also, if this is the
-	 * CPU port, enable learn messages to be sent to this port.
-	 */
-	REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
-
-	/*
-	 * Port based VLAN map: give each port its own address
-	 * database, allow the CPU port to talk to each of the 'real'
-	 * ports, and allow each of the 'real' ports to only talk to
-	 * the upstream port.
-	 */
-	val = (p & 0xf) << 12;
-	if (dsa_is_cpu_port(ds, p))
-		val |= ds->phys_port_mask;
-	else
-		val |= 1 << dsa_upstream_port(ds);
-	REG_WRITE(addr, 0x06, val);
-
-	/*
-	 * Default VLAN ID and priority: don't set a default VLAN
-	 * ID, and set the default packet priority to zero.
-	 */
-	REG_WRITE(addr, 0x07, 0x0000);
-
-	/*
-	 * Port Control 2: don't force a good FCS, set the maximum
-	 * frame size to 10240 bytes, don't let the switch add or
-	 * strip 802.1q tags, don't discard tagged or untagged frames
-	 * on this port, do a destination address lookup on all
-	 * received packets as usual, disable ARP mirroring and don't
-	 * send a copy of all transmitted/received frames on this port
-	 * to the CPU.
-	 */
-	REG_WRITE(addr, 0x08, 0x2080);
-
-	/*
-	 * Egress rate control: disable egress rate control.
-	 */
-	REG_WRITE(addr, 0x09, 0x0001);
-
-	/*
-	 * Egress rate control 2: disable egress rate control.
-	 */
-	REG_WRITE(addr, 0x0a, 0x0000);
-
-	/*
-	 * Port Association Vector: when learning source addresses
-	 * of packets, add the address to the address database using
-	 * a port bitmap that has only the bit for this port set and
-	 * the other bits clear.
-	 */
-	REG_WRITE(addr, 0x0b, 1 << p);
-
-	/*
-	 * Port ATU control: disable limiting the number of address
-	 * database entries that this port is allowed to use.
-	 */
-	REG_WRITE(addr, 0x0c, 0x0000);
-
-	/*
-	 * Priorit Override: disable DA, SA and VTU priority override.
-	 */
-	REG_WRITE(addr, 0x0d, 0x0000);
-
-	/*
-	 * Port Ethertype: use the Ethertype DSA Ethertype value.
-	 */
-	REG_WRITE(addr, 0x0f, ETH_P_EDSA);
-
-	/*
-	 * Tag Remap: use an identity 802.1p prio -> switch prio
-	 * mapping.
-	 */
-	REG_WRITE(addr, 0x18, 0x3210);
-
-	/*
-	 * Tag Remap 2: use an identity 802.1p prio -> switch prio
-	 * mapping.
-	 */
-	REG_WRITE(addr, 0x19, 0x7654);
-
-	return 0;
-}
-
-static int mv88e6123_61_65_setup(struct dsa_switch *ds)
-{
-	struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
-	int i;
-	int ret;
-
-	mutex_init(&ps->smi_mutex);
-	mutex_init(&ps->stats_mutex);
-
-	ret = mv88e6123_61_65_switch_reset(ds);
-	if (ret < 0)
-		return ret;
-
-	/* @@@ initialise vtu and atu */
-
-	ret = mv88e6123_61_65_setup_global(ds);
-	if (ret < 0)
-		return ret;
-
-	for (i = 0; i < 6; i++) {
-		ret = mv88e6123_61_65_setup_port(ds, i);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static int mv88e6123_61_65_port_to_phy_addr(int port)
-{
-	if (port >= 0 && port <= 4)
-		return port;
-	return -1;
-}
-
-static int
-mv88e6123_61_65_phy_read(struct dsa_switch *ds, int port, int regnum)
-{
-	int addr = mv88e6123_61_65_port_to_phy_addr(port);
-	return mv88e6xxx_phy_read(ds, addr, regnum);
-}
-
-static int
-mv88e6123_61_65_phy_write(struct dsa_switch *ds,
-			      int port, int regnum, u16 val)
-{
-	int addr = mv88e6123_61_65_port_to_phy_addr(port);
-	return mv88e6xxx_phy_write(ds, addr, regnum, val);
-}
-
-static struct mv88e6xxx_hw_stat mv88e6123_61_65_hw_stats[] = {
-	{ "in_good_octets", 8, 0x00, },
-	{ "in_bad_octets", 4, 0x02, },
-	{ "in_unicast", 4, 0x04, },
-	{ "in_broadcasts", 4, 0x06, },
-	{ "in_multicasts", 4, 0x07, },
-	{ "in_pause", 4, 0x16, },
-	{ "in_undersize", 4, 0x18, },
-	{ "in_fragments", 4, 0x19, },
-	{ "in_oversize", 4, 0x1a, },
-	{ "in_jabber", 4, 0x1b, },
-	{ "in_rx_error", 4, 0x1c, },
-	{ "in_fcs_error", 4, 0x1d, },
-	{ "out_octets", 8, 0x0e, },
-	{ "out_unicast", 4, 0x10, },
-	{ "out_broadcasts", 4, 0x13, },
-	{ "out_multicasts", 4, 0x12, },
-	{ "out_pause", 4, 0x15, },
-	{ "excessive", 4, 0x11, },
-	{ "collisions", 4, 0x1e, },
-	{ "deferred", 4, 0x05, },
-	{ "single", 4, 0x14, },
-	{ "multiple", 4, 0x17, },
-	{ "out_fcs_error", 4, 0x03, },
-	{ "late", 4, 0x1f, },
-	{ "hist_64bytes", 4, 0x08, },
-	{ "hist_65_127bytes", 4, 0x09, },
-	{ "hist_128_255bytes", 4, 0x0a, },
-	{ "hist_256_511bytes", 4, 0x0b, },
-	{ "hist_512_1023bytes", 4, 0x0c, },
-	{ "hist_1024_max_bytes", 4, 0x0d, },
-};
-
-static void
-mv88e6123_61_65_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
-{
-	mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6123_61_65_hw_stats),
-			      mv88e6123_61_65_hw_stats, port, data);
-}
-
-static void
-mv88e6123_61_65_get_ethtool_stats(struct dsa_switch *ds,
-				  int port, uint64_t *data)
-{
-	mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6123_61_65_hw_stats),
-				    mv88e6123_61_65_hw_stats, port, data);
-}
-
-static int mv88e6123_61_65_get_sset_count(struct dsa_switch *ds)
-{
-	return ARRAY_SIZE(mv88e6123_61_65_hw_stats);
-}
-
-struct dsa_switch_driver mv88e6123_61_65_switch_driver = {
-	.tag_protocol		= cpu_to_be16(ETH_P_EDSA),
-	.priv_size		= sizeof(struct mv88e6xxx_priv_state),
-	.probe			= mv88e6123_61_65_probe,
-	.setup			= mv88e6123_61_65_setup,
-	.set_addr		= mv88e6xxx_set_addr_indirect,
-	.phy_read		= mv88e6123_61_65_phy_read,
-	.phy_write		= mv88e6123_61_65_phy_write,
-	.poll_link		= mv88e6xxx_poll_link,
-	.get_strings		= mv88e6123_61_65_get_strings,
-	.get_ethtool_stats	= mv88e6123_61_65_get_ethtool_stats,
-	.get_sset_count		= mv88e6123_61_65_get_sset_count,
-};
-
-MODULE_ALIAS("platform:mv88e6123");
-MODULE_ALIAS("platform:mv88e6161");
-MODULE_ALIAS("platform:mv88e6165");
diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c
deleted file mode 100644
index e0eb6824383..00000000000
--- a/net/dsa/mv88e6131.c
+++ /dev/null
@@ -1,435 +0,0 @@
-/*
- * net/dsa/mv88e6131.c - Marvell 88e6095/6095f/6131 switch chip support
- * Copyright (c) 2008-2009 Marvell Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/list.h>
-#include <linux/netdevice.h>
-#include <linux/phy.h>
-#include <net/dsa.h>
-#include "mv88e6xxx.h"
-
-/*
- * Switch product IDs
- */
-#define ID_6085		0x04a0
-#define ID_6095		0x0950
-#define ID_6131		0x1060
-
-static char *mv88e6131_probe(struct mii_bus *bus, int sw_addr)
-{
-	int ret;
-
-	ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
-	if (ret >= 0) {
-		ret &= 0xfff0;
-		if (ret == ID_6085)
-			return "Marvell 88E6085";
-		if (ret == ID_6095)
-			return "Marvell 88E6095/88E6095F";
-		if (ret == ID_6131)
-			return "Marvell 88E6131";
-	}
-
-	return NULL;
-}
-
-static int mv88e6131_switch_reset(struct dsa_switch *ds)
-{
-	int i;
-	int ret;
-
-	/*
-	 * Set all ports to the disabled state.
-	 */
-	for (i = 0; i < 11; i++) {
-		ret = REG_READ(REG_PORT(i), 0x04);
-		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
-	}
-
-	/*
-	 * Wait for transmit queues to drain.
-	 */
-	msleep(2);
-
-	/*
-	 * Reset the switch.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
-
-	/*
-	 * Wait up to one second for reset to complete.
-	 */
-	for (i = 0; i < 1000; i++) {
-		ret = REG_READ(REG_GLOBAL, 0x00);
-		if ((ret & 0xc800) == 0xc800)
-			break;
-
-		msleep(1);
-	}
-	if (i == 1000)
-		return -ETIMEDOUT;
-
-	return 0;
-}
-
-static int mv88e6131_setup_global(struct dsa_switch *ds)
-{
-	int ret;
-	int i;
-
-	/*
-	 * Enable the PHY polling unit, don't discard packets with
-	 * excessive collisions, use a weighted fair queueing scheme
-	 * to arbitrate between packet queues, set the maximum frame
-	 * size to 1632, and mask all interrupt sources.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x04, 0x4400);
-
-	/*
-	 * Set the default address aging time to 5 minutes, and
-	 * enable address learn messages to be sent to all message
-	 * ports.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
-
-	/*
-	 * Configure the priority mapping registers.
-	 */
-	ret = mv88e6xxx_config_prio(ds);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * Set the VLAN ethertype to 0x8100.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x19, 0x8100);
-
-	/*
-	 * Disable ARP mirroring, and configure the upstream port as
-	 * the port to which ingress and egress monitor frames are to
-	 * be sent.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1100) | 0x00f0);
-
-	/*
-	 * Disable cascade port functionality unless this device
-	 * is used in a cascade configuration, and set the switch's
-	 * DSA device number.
-	 */
-	if (ds->dst->pd->nr_chips > 1)
-		REG_WRITE(REG_GLOBAL, 0x1c, 0xf000 | (ds->index & 0x1f));
-	else
-		REG_WRITE(REG_GLOBAL, 0x1c, 0xe000 | (ds->index & 0x1f));
-
-	/*
-	 * Send all frames with destination addresses matching
-	 * 01:80:c2:00:00:0x to the CPU port.
-	 */
-	REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
-
-	/*
-	 * Ignore removed tag data on doubly tagged packets, disable
-	 * flow control messages, force flow control priority to the
-	 * highest, and send all special multicast frames to the CPU
-	 * port at the highest priority.
-	 */
-	REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
-
-	/*
-	 * Program the DSA routing table.
-	 */
-	for (i = 0; i < 32; i++) {
-		int nexthop;
-
-		nexthop = 0x1f;
-		if (i != ds->index && i < ds->dst->pd->nr_chips)
-			nexthop = ds->pd->rtable[i] & 0x1f;
-
-		REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
-	}
-
-	/*
-	 * Clear all trunk masks.
-	 */
-	for (i = 0; i < 8; i++)
-		REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7ff);
-
-	/*
-	 * Clear all trunk mappings.
-	 */
-	for (i = 0; i < 16; i++)
-		REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
-
-	/*
-	 * Force the priority of IGMP/MLD snoop frames and ARP frames
-	 * to the highest setting.
-	 */
-	REG_WRITE(REG_GLOBAL2, 0x0f, 0x00ff);
-
-	return 0;
-}
-
-static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
-{
-	struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
-	int addr = REG_PORT(p);
-	u16 val;
-
-	/*
-	 * MAC Forcing register: don't force link, speed, duplex
-	 * or flow control state to any particular values on physical
-	 * ports, but force the CPU port and all DSA ports to 1000 Mb/s
-	 * (100 Mb/s on 6085) full duplex.
-	 */
-	if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
-		if (ps->id == ID_6085)
-			REG_WRITE(addr, 0x01, 0x003d); /* 100 Mb/s */
-		else
-			REG_WRITE(addr, 0x01, 0x003e); /* 1000 Mb/s */
-	else
-		REG_WRITE(addr, 0x01, 0x0003);
-
-	/*
-	 * Port Control: disable Core Tag, disable Drop-on-Lock,
-	 * transmit frames unmodified, disable Header mode,
-	 * enable IGMP/MLD snoop, disable DoubleTag, disable VLAN
-	 * tunneling, determine priority by looking at 802.1p and
-	 * IP priority fields (IP prio has precedence), and set STP
-	 * state to Forwarding.
-	 *
-	 * If this is the upstream port for this switch, enable
-	 * forwarding of unknown unicasts, and enable DSA tagging
-	 * mode.
-	 *
-	 * If this is the link to another switch, use DSA tagging
-	 * mode, but do not enable forwarding of unknown unicasts.
-	 */
-	val = 0x0433;
-	if (p == dsa_upstream_port(ds)) {
-		val |= 0x0104;
-		/*
-		 * On 6085, unknown multicast forward is controlled
-		 * here rather than in Port Control 2 register.
-		 */
-		if (ps->id == ID_6085)
-			val |= 0x0008;
-	}
-	if (ds->dsa_port_mask & (1 << p))
-		val |= 0x0100;
-	REG_WRITE(addr, 0x04, val);
-
-	/*
-	 * Port Control 1: disable trunking.  Also, if this is the
-	 * CPU port, enable learn messages to be sent to this port.
-	 */
-	REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
-
-	/*
-	 * Port based VLAN map: give each port its own address
-	 * database, allow the CPU port to talk to each of the 'real'
-	 * ports, and allow each of the 'real' ports to only talk to
-	 * the upstream port.
-	 */
-	val = (p & 0xf) << 12;
-	if (dsa_is_cpu_port(ds, p))
-		val |= ds->phys_port_mask;
-	else
-		val |= 1 << dsa_upstream_port(ds);
-	REG_WRITE(addr, 0x06, val);
-
-	/*
-	 * Default VLAN ID and priority: don't set a default VLAN
-	 * ID, and set the default packet priority to zero.
-	 */
-	REG_WRITE(addr, 0x07, 0x0000);
-
-	/*
-	 * Port Control 2: don't force a good FCS, don't use
-	 * VLAN-based, source address-based or destination
-	 * address-based priority overrides, don't let the switch
-	 * add or strip 802.1q tags, don't discard tagged or
-	 * untagged frames on this port, do a destination address
-	 * lookup on received packets as usual, don't send a copy
-	 * of all transmitted/received frames on this port to the
-	 * CPU, and configure the upstream port number.
-	 *
-	 * If this is the upstream port for this switch, enable
-	 * forwarding of unknown multicast addresses.
-	 */
-	if (ps->id == ID_6085)
-		/*
-		 * on 6085, bits 3:0 are reserved, bit 6 control ARP
-		 * mirroring, and multicast forward is handled in
-		 * Port Control register.
-		 */
-		REG_WRITE(addr, 0x08, 0x0080);
-	else {
-		val = 0x0080 | dsa_upstream_port(ds);
-		if (p == dsa_upstream_port(ds))
-			val |= 0x0040;
-		REG_WRITE(addr, 0x08, val);
-	}
-
-	/*
-	 * Rate Control: disable ingress rate limiting.
-	 */
-	REG_WRITE(addr, 0x09, 0x0000);
-
-	/*
-	 * Rate Control 2: disable egress rate limiting.
-	 */
-	REG_WRITE(addr, 0x0a, 0x0000);
-
-	/*
-	 * Port Association Vector: when learning source addresses
-	 * of packets, add the address to the address database using
-	 * a port bitmap that has only the bit for this port set and
-	 * the other bits clear.
-	 */
-	REG_WRITE(addr, 0x0b, 1 << p);
-
-	/*
-	 * Tag Remap: use an identity 802.1p prio -> switch prio
-	 * mapping.
-	 */
-	REG_WRITE(addr, 0x18, 0x3210);
-
-	/*
-	 * Tag Remap 2: use an identity 802.1p prio -> switch prio
-	 * mapping.
-	 */
-	REG_WRITE(addr, 0x19, 0x7654);
-
-	return 0;
-}
-
-static int mv88e6131_setup(struct dsa_switch *ds)
-{
-	struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
-	int i;
-	int ret;
-
-	mutex_init(&ps->smi_mutex);
-	mv88e6xxx_ppu_state_init(ds);
-	mutex_init(&ps->stats_mutex);
-
-	ps->id = REG_READ(REG_PORT(0), 0x03) & 0xfff0;
-
-	ret = mv88e6131_switch_reset(ds);
-	if (ret < 0)
-		return ret;
-
-	/* @@@ initialise vtu and atu */
-
-	ret = mv88e6131_setup_global(ds);
-	if (ret < 0)
-		return ret;
-
-	for (i = 0; i < 11; i++) {
-		ret = mv88e6131_setup_port(ds, i);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static int mv88e6131_port_to_phy_addr(int port)
-{
-	if (port >= 0 && port <= 11)
-		return port;
-	return -1;
-}
-
-static int
-mv88e6131_phy_read(struct dsa_switch *ds, int port, int regnum)
-{
-	int addr = mv88e6131_port_to_phy_addr(port);
-	return mv88e6xxx_phy_read_ppu(ds, addr, regnum);
-}
-
-static int
-mv88e6131_phy_write(struct dsa_switch *ds,
-			      int port, int regnum, u16 val)
-{
-	int addr = mv88e6131_port_to_phy_addr(port);
-	return mv88e6xxx_phy_write_ppu(ds, addr, regnum, val);
-}
-
-static struct mv88e6xxx_hw_stat mv88e6131_hw_stats[] = {
-	{ "in_good_octets", 8, 0x00, },
-	{ "in_bad_octets", 4, 0x02, },
-	{ "in_unicast", 4, 0x04, },
-	{ "in_broadcasts", 4, 0x06, },
-	{ "in_multicasts", 4, 0x07, },
-	{ "in_pause", 4, 0x16, },
-	{ "in_undersize", 4, 0x18, },
-	{ "in_fragments", 4, 0x19, },
-	{ "in_oversize", 4, 0x1a, },
-	{ "in_jabber", 4, 0x1b, },
-	{ "in_rx_error", 4, 0x1c, },
-	{ "in_fcs_error", 4, 0x1d, },
-	{ "out_octets", 8, 0x0e, },
-	{ "out_unicast", 4, 0x10, },
-	{ "out_broadcasts", 4, 0x13, },
-	{ "out_multicasts", 4, 0x12, },
-	{ "out_pause", 4, 0x15, },
-	{ "excessive", 4, 0x11, },
-	{ "collisions", 4, 0x1e, },
-	{ "deferred", 4, 0x05, },
-	{ "single", 4, 0x14, },
-	{ "multiple", 4, 0x17, },
-	{ "out_fcs_error", 4, 0x03, },
-	{ "late", 4, 0x1f, },
-	{ "hist_64bytes", 4, 0x08, },
-	{ "hist_65_127bytes", 4, 0x09, },
-	{ "hist_128_255bytes", 4, 0x0a, },
-	{ "hist_256_511bytes", 4, 0x0b, },
-	{ "hist_512_1023bytes", 4, 0x0c, },
-	{ "hist_1024_max_bytes", 4, 0x0d, },
-};
-
-static void
-mv88e6131_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
-{
-	mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6131_hw_stats),
-			      mv88e6131_hw_stats, port, data);
-}
-
-static void
-mv88e6131_get_ethtool_stats(struct dsa_switch *ds,
-				  int port, uint64_t *data)
-{
-	mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6131_hw_stats),
-				    mv88e6131_hw_stats, port, data);
-}
-
-static int mv88e6131_get_sset_count(struct dsa_switch *ds)
-{
-	return ARRAY_SIZE(mv88e6131_hw_stats);
-}
-
-struct dsa_switch_driver mv88e6131_switch_driver = {
-	.tag_protocol		= cpu_to_be16(ETH_P_DSA),
-	.priv_size		= sizeof(struct mv88e6xxx_priv_state),
-	.probe			= mv88e6131_probe,
-	.setup			= mv88e6131_setup,
-	.set_addr		= mv88e6xxx_set_addr_direct,
-	.phy_read		= mv88e6131_phy_read,
-	.phy_write		= mv88e6131_phy_write,
-	.poll_link		= mv88e6xxx_poll_link,
-	.get_strings		= mv88e6131_get_strings,
-	.get_ethtool_stats	= mv88e6131_get_ethtool_stats,
-	.get_sset_count		= mv88e6131_get_sset_count,
-};
-
-MODULE_ALIAS("platform:mv88e6085");
-MODULE_ALIAS("platform:mv88e6095");
-MODULE_ALIAS("platform:mv88e6095f");
-MODULE_ALIAS("platform:mv88e6131");
diff --git a/net/dsa/mv88e6xxx.c b/net/dsa/mv88e6xxx.c
deleted file mode 100644
index 5467c040824..00000000000
--- a/net/dsa/mv88e6xxx.c
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * net/dsa/mv88e6xxx.c - Marvell 88e6xxx switch chip support
- * Copyright (c) 2008 Marvell Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/list.h>
-#include <linux/netdevice.h>
-#include <linux/phy.h>
-#include <net/dsa.h>
-#include "mv88e6xxx.h"
-
-/*
- * If the switch's ADDR[4:0] strap pins are strapped to zero, it will
- * use all 32 SMI bus addresses on its SMI bus, and all switch registers
- * will be directly accessible on some {device address,register address}
- * pair.  If the ADDR[4:0] pins are not strapped to zero, the switch
- * will only respond to SMI transactions to that specific address, and
- * an indirect addressing mechanism needs to be used to access its
- * registers.
- */
-static int mv88e6xxx_reg_wait_ready(struct mii_bus *bus, int sw_addr)
-{
-	int ret;
-	int i;
-
-	for (i = 0; i < 16; i++) {
-		ret = mdiobus_read(bus, sw_addr, 0);
-		if (ret < 0)
-			return ret;
-
-		if ((ret & 0x8000) == 0)
-			return 0;
-	}
-
-	return -ETIMEDOUT;
-}
-
-int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg)
-{
-	int ret;
-
-	if (sw_addr == 0)
-		return mdiobus_read(bus, addr, reg);
-
-	/*
-	 * Wait for the bus to become free.
-	 */
-	ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * Transmit the read command.
-	 */
-	ret = mdiobus_write(bus, sw_addr, 0, 0x9800 | (addr << 5) | reg);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * Wait for the read command to complete.
-	 */
-	ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * Read the data.
-	 */
-	ret = mdiobus_read(bus, sw_addr, 1);
-	if (ret < 0)
-		return ret;
-
-	return ret & 0xffff;
-}
-
-int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg)
-{
-	struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
-	int ret;
-
-	mutex_lock(&ps->smi_mutex);
-	ret = __mv88e6xxx_reg_read(ds->master_mii_bus,
-				   ds->pd->sw_addr, addr, reg);
-	mutex_unlock(&ps->smi_mutex);
-
-	return ret;
-}
-
-int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
-			  int reg, u16 val)
-{
-	int ret;
-
-	if (sw_addr == 0)
-		return mdiobus_write(bus, addr, reg, val);
-
-	/*
-	 * Wait for the bus to become free.
-	 */
-	ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * Transmit the data to write.
-	 */
-	ret = mdiobus_write(bus, sw_addr, 1, val);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * Transmit the write command.
-	 */
-	ret = mdiobus_write(bus, sw_addr, 0, 0x9400 | (addr << 5) | reg);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * Wait for the write command to complete.
-	 */
-	ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
-{
-	struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
-	int ret;
-
-	mutex_lock(&ps->smi_mutex);
-	ret = __mv88e6xxx_reg_write(ds->master_mii_bus,
-				    ds->pd->sw_addr, addr, reg, val);
-	mutex_unlock(&ps->smi_mutex);
-
-	return ret;
-}
-
-int mv88e6xxx_config_prio(struct dsa_switch *ds)
-{
-	/*
-	 * Configure the IP ToS mapping registers.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x10, 0x0000);
-	REG_WRITE(REG_GLOBAL, 0x11, 0x0000);
-	REG_WRITE(REG_GLOBAL, 0x12, 0x5555);
-	REG_WRITE(REG_GLOBAL, 0x13, 0x5555);
-	REG_WRITE(REG_GLOBAL, 0x14, 0xaaaa);
-	REG_WRITE(REG_GLOBAL, 0x15, 0xaaaa);
-	REG_WRITE(REG_GLOBAL, 0x16, 0xffff);
-	REG_WRITE(REG_GLOBAL, 0x17, 0xffff);
-
-	/*
-	 * Configure the IEEE 802.1p priority mapping register.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x18, 0xfa41);
-
-	return 0;
-}
-
-int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr)
-{
-	REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
-	REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
-	REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
-
-	return 0;
-}
-
-int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr)
-{
-	int i;
-	int ret;
-
-	for (i = 0; i < 6; i++) {
-		int j;
-
-		/*
-		 * Write the MAC address byte.
-		 */
-		REG_WRITE(REG_GLOBAL2, 0x0d, 0x8000 | (i << 8) | addr[i]);
-
-		/*
-		 * Wait for the write to complete.
-		 */
-		for (j = 0; j < 16; j++) {
-			ret = REG_READ(REG_GLOBAL2, 0x0d);
-			if ((ret & 0x8000) == 0)
-				break;
-		}
-		if (j == 16)
-			return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-int mv88e6xxx_phy_read(struct dsa_switch *ds, int addr, int regnum)
-{
-	if (addr >= 0)
-		return mv88e6xxx_reg_read(ds, addr, regnum);
-	return 0xffff;
-}
-
-int mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum, u16 val)
-{
-	if (addr >= 0)
-		return mv88e6xxx_reg_write(ds, addr, regnum, val);
-	return 0;
-}
-
-#ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU
-static int mv88e6xxx_ppu_disable(struct dsa_switch *ds)
-{
-	int ret;
-	int i;
-
-	ret = REG_READ(REG_GLOBAL, 0x04);
-	REG_WRITE(REG_GLOBAL, 0x04, ret & ~0x4000);
-
-	for (i = 0; i < 1000; i++) {
-	        ret = REG_READ(REG_GLOBAL, 0x00);
-	        msleep(1);
-	        if ((ret & 0xc000) != 0xc000)
-	                return 0;
-	}
-
-	return -ETIMEDOUT;
-}
-
-static int mv88e6xxx_ppu_enable(struct dsa_switch *ds)
-{
-	int ret;
-	int i;
-
-	ret = REG_READ(REG_GLOBAL, 0x04);
-	REG_WRITE(REG_GLOBAL, 0x04, ret | 0x4000);
-
-	for (i = 0; i < 1000; i++) {
-	        ret = REG_READ(REG_GLOBAL, 0x00);
-	        msleep(1);
-	        if ((ret & 0xc000) == 0xc000)
-	                return 0;
-	}
-
-	return -ETIMEDOUT;
-}
-
-static void mv88e6xxx_ppu_reenable_work(struct work_struct *ugly)
-{
-	struct mv88e6xxx_priv_state *ps;
-
-	ps = container_of(ugly, struct mv88e6xxx_priv_state, ppu_work);
-	if (mutex_trylock(&ps->ppu_mutex)) {
-	        struct dsa_switch *ds = ((struct dsa_switch *)ps) - 1;
-
-	        if (mv88e6xxx_ppu_enable(ds) == 0)
-	                ps->ppu_disabled = 0;
-	        mutex_unlock(&ps->ppu_mutex);
-	}
-}
-
-static void mv88e6xxx_ppu_reenable_timer(unsigned long _ps)
-{
-	struct mv88e6xxx_priv_state *ps = (void *)_ps;
-
-	schedule_work(&ps->ppu_work);
-}
-
-static int mv88e6xxx_ppu_access_get(struct dsa_switch *ds)
-{
-	struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
-	int ret;
-
-	mutex_lock(&ps->ppu_mutex);
-
-	/*
-	 * If the PHY polling unit is enabled, disable it so that
-	 * we can access the PHY registers.  If it was already
-	 * disabled, cancel the timer that is going to re-enable
-	 * it.
-	 */
-	if (!ps->ppu_disabled) {
-	        ret = mv88e6xxx_ppu_disable(ds);
-	        if (ret < 0) {
-	                mutex_unlock(&ps->ppu_mutex);
-	                return ret;
-	        }
-	        ps->ppu_disabled = 1;
-	} else {
-	        del_timer(&ps->ppu_timer);
-	        ret = 0;
-	}
-
-	return ret;
-}
-
-static void mv88e6xxx_ppu_access_put(struct dsa_switch *ds)
-{
-	struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
-
-	/*
-	 * Schedule a timer to re-enable the PHY polling unit.
-	 */
-	mod_timer(&ps->ppu_timer, jiffies + msecs_to_jiffies(10));
-	mutex_unlock(&ps->ppu_mutex);
-}
-
-void mv88e6xxx_ppu_state_init(struct dsa_switch *ds)
-{
-	struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
-
-	mutex_init(&ps->ppu_mutex);
-	INIT_WORK(&ps->ppu_work, mv88e6xxx_ppu_reenable_work);
-	init_timer(&ps->ppu_timer);
-	ps->ppu_timer.data = (unsigned long)ps;
-	ps->ppu_timer.function = mv88e6xxx_ppu_reenable_timer;
-}
-
-int mv88e6xxx_phy_read_ppu(struct dsa_switch *ds, int addr, int regnum)
-{
-	int ret;
-
-	ret = mv88e6xxx_ppu_access_get(ds);
-	if (ret >= 0) {
-	        ret = mv88e6xxx_reg_read(ds, addr, regnum);
-	        mv88e6xxx_ppu_access_put(ds);
-	}
-
-	return ret;
-}
-
-int mv88e6xxx_phy_write_ppu(struct dsa_switch *ds, int addr,
-			    int regnum, u16 val)
-{
-	int ret;
-
-	ret = mv88e6xxx_ppu_access_get(ds);
-	if (ret >= 0) {
-	        ret = mv88e6xxx_reg_write(ds, addr, regnum, val);
-	        mv88e6xxx_ppu_access_put(ds);
-	}
-
-	return ret;
-}
-#endif
-
-void mv88e6xxx_poll_link(struct dsa_switch *ds)
-{
-	int i;
-
-	for (i = 0; i < DSA_MAX_PORTS; i++) {
-		struct net_device *dev;
-		int uninitialized_var(port_status);
-		int link;
-		int speed;
-		int duplex;
-		int fc;
-
-		dev = ds->ports[i];
-		if (dev == NULL)
-			continue;
-
-		link = 0;
-		if (dev->flags & IFF_UP) {
-			port_status = mv88e6xxx_reg_read(ds, REG_PORT(i), 0x00);
-			if (port_status < 0)
-				continue;
-
-			link = !!(port_status & 0x0800);
-		}
-
-		if (!link) {
-			if (netif_carrier_ok(dev)) {
-				printk(KERN_INFO "%s: link down\n", dev->name);
-				netif_carrier_off(dev);
-			}
-			continue;
-		}
-
-		switch (port_status & 0x0300) {
-		case 0x0000:
-			speed = 10;
-			break;
-		case 0x0100:
-			speed = 100;
-			break;
-		case 0x0200:
-			speed = 1000;
-			break;
-		default:
-			speed = -1;
-			break;
-		}
-		duplex = (port_status & 0x0400) ? 1 : 0;
-		fc = (port_status & 0x8000) ? 1 : 0;
-
-		if (!netif_carrier_ok(dev)) {
-			printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
-					 "flow control %sabled\n", dev->name,
-					 speed, duplex ? "full" : "half",
-					 fc ? "en" : "dis");
-			netif_carrier_on(dev);
-		}
-	}
-}
-
-static int mv88e6xxx_stats_wait(struct dsa_switch *ds)
-{
-	int ret;
-	int i;
-
-	for (i = 0; i < 10; i++) {
-		ret = REG_READ(REG_GLOBAL, 0x1d);
-		if ((ret & 0x8000) == 0)
-			return 0;
-	}
-
-	return -ETIMEDOUT;
-}
-
-static int mv88e6xxx_stats_snapshot(struct dsa_switch *ds, int port)
-{
-	int ret;
-
-	/*
-	 * Snapshot the hardware statistics counters for this port.
-	 */
-	REG_WRITE(REG_GLOBAL, 0x1d, 0xdc00 | port);
-
-	/*
-	 * Wait for the snapshotting to complete.
-	 */
-	ret = mv88e6xxx_stats_wait(ds);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static void mv88e6xxx_stats_read(struct dsa_switch *ds, int stat, u32 *val)
-{
-	u32 _val;
-	int ret;
-
-	*val = 0;
-
-	ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, 0x1d, 0xcc00 | stat);
-	if (ret < 0)
-		return;
-
-	ret = mv88e6xxx_stats_wait(ds);
-	if (ret < 0)
-		return;
-
-	ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, 0x1e);
-	if (ret < 0)
-		return;
-
-	_val = ret << 16;
-
-	ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, 0x1f);
-	if (ret < 0)
-		return;
-
-	*val = _val | ret;
-}
-
-void mv88e6xxx_get_strings(struct dsa_switch *ds,
-			   int nr_stats, struct mv88e6xxx_hw_stat *stats,
-			   int port, uint8_t *data)
-{
-	int i;
-
-	for (i = 0; i < nr_stats; i++) {
-		memcpy(data + i * ETH_GSTRING_LEN,
-		       stats[i].string, ETH_GSTRING_LEN);
-	}
-}
-
-void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
-				 int nr_stats, struct mv88e6xxx_hw_stat *stats,
-				 int port, uint64_t *data)
-{
-	struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
-	int ret;
-	int i;
-
-	mutex_lock(&ps->stats_mutex);
-
-	ret = mv88e6xxx_stats_snapshot(ds, port);
-	if (ret < 0) {
-		mutex_unlock(&ps->stats_mutex);
-		return;
-	}
-
-	/*
-	 * Read each of the counters.
-	 */
-	for (i = 0; i < nr_stats; i++) {
-		struct mv88e6xxx_hw_stat *s = stats + i;
-		u32 low;
-		u32 high;
-
-		mv88e6xxx_stats_read(ds, s->reg, &low);
-		if (s->sizeof_stat == 8)
-			mv88e6xxx_stats_read(ds, s->reg + 1, &high);
-		else
-			high = 0;
-
-		data[i] = (((u64)high) << 32) | low;
-	}
-
-	mutex_unlock(&ps->stats_mutex);
-}
-
-static int __init mv88e6xxx_init(void)
-{
-#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
-	register_switch_driver(&mv88e6131_switch_driver);
-#endif
-#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
-	register_switch_driver(&mv88e6123_61_65_switch_driver);
-#endif
-	return 0;
-}
-module_init(mv88e6xxx_init);
-
-static void __exit mv88e6xxx_cleanup(void)
-{
-#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
-	unregister_switch_driver(&mv88e6123_61_65_switch_driver);
-#endif
-#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
-	unregister_switch_driver(&mv88e6131_switch_driver);
-#endif
-}
-module_exit(mv88e6xxx_cleanup);
-
-MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
-MODULE_DESCRIPTION("Driver for Marvell 88E6XXX ethernet switch chips");
-MODULE_LICENSE("GPL");
diff --git a/net/dsa/mv88e6xxx.h b/net/dsa/mv88e6xxx.h
deleted file mode 100644
index fc2cd7b90e8..00000000000
--- a/net/dsa/mv88e6xxx.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * net/dsa/mv88e6xxx.h - Marvell 88e6xxx switch chip support
- * Copyright (c) 2008 Marvell Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __MV88E6XXX_H
-#define __MV88E6XXX_H
-
-#define REG_PORT(p)		(0x10 + (p))
-#define REG_GLOBAL		0x1b
-#define REG_GLOBAL2		0x1c
-
-struct mv88e6xxx_priv_state {
-	/*
-	 * When using multi-chip addressing, this mutex protects
-	 * access to the indirect access registers.  (In single-chip
-	 * mode, this mutex is effectively useless.)
-	 */
-	struct mutex	smi_mutex;
-
-#ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU
-	/*
-	 * Handles automatic disabling and re-enabling of the PHY
-	 * polling unit.
-	 */
-	struct mutex		ppu_mutex;
-	int			ppu_disabled;
-	struct work_struct	ppu_work;
-	struct timer_list	ppu_timer;
-#endif
-
-	/*
-	 * This mutex serialises access to the statistics unit.
-	 * Hold this mutex over snapshot + dump sequences.
-	 */
-	struct mutex	stats_mutex;
-
-	int		id; /* switch product id */
-};
-
-struct mv88e6xxx_hw_stat {
-	char string[ETH_GSTRING_LEN];
-	int sizeof_stat;
-	int reg;
-};
-
-int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg);
-int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg);
-int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
-                          int reg, u16 val);
-int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val);
-int mv88e6xxx_config_prio(struct dsa_switch *ds);
-int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr);
-int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr);
-int mv88e6xxx_phy_read(struct dsa_switch *ds, int addr, int regnum);
-int mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum, u16 val);
-void mv88e6xxx_ppu_state_init(struct dsa_switch *ds);
-int mv88e6xxx_phy_read_ppu(struct dsa_switch *ds, int addr, int regnum);
-int mv88e6xxx_phy_write_ppu(struct dsa_switch *ds, int addr,
-			    int regnum, u16 val);
-void mv88e6xxx_poll_link(struct dsa_switch *ds);
-void mv88e6xxx_get_strings(struct dsa_switch *ds,
-			   int nr_stats, struct mv88e6xxx_hw_stat *stats,
-			   int port, uint8_t *data);
-void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
-				 int nr_stats, struct mv88e6xxx_hw_stat *stats,
-				 int port, uint64_t *data);
-
-extern struct dsa_switch_driver mv88e6131_switch_driver;
-extern struct dsa_switch_driver mv88e6123_61_65_switch_driver;
-
-#define REG_READ(addr, reg)						\
-	({								\
-		int __ret;						\
-									\
-		__ret = mv88e6xxx_reg_read(ds, addr, reg);		\
-		if (__ret < 0)						\
-			return __ret;					\
-		__ret;							\
-	})
-
-#define REG_WRITE(addr, reg, val)					\
-	({								\
-		int __ret;						\
-									\
-		__ret = mv88e6xxx_reg_write(ds, addr, reg, val);	\
-		if (__ret < 0)						\
-			return __ret;					\
-	})
-
-
-
-#endif