[ALSA] Add snd-portman2x4 driver for Midiman Portman 2x4 MIDI device

snd-portman2x4 driver supports Midiman Portman 2x4 parallel port
MIDI device.

Signed-off-by: Matthias Koenig <mkoenig@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

3 files changed, 889 insertions, 0 deletions

diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig
index 40ebd2f4405..83529b08d01 100644
--- a/sound/drivers/Kconfig
+++ b/sound/drivers/Kconfig
@@ -109,4 +109,15 @@ config SND_MPU401
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-mpu401.
 
+config SND_PORTMAN2X4
+	tristate "Portman 2x4 driver"
+	depends on SND && PARPORT
+	select SND_RAWMIDI
+	help
+	  Say Y here to include support for Midiman Portman 2x4 parallel
+	  port MIDI device.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-portman2x4.
+
 endmenu
diff --git a/sound/drivers/Makefile b/sound/drivers/Makefile
index c9bad6d67e7..04112642611 100644
--- a/sound/drivers/Makefile
+++ b/sound/drivers/Makefile
@@ -6,6 +6,7 @@
 snd-dummy-objs := dummy.o
 snd-mtpav-objs := mtpav.o
 snd-mts64-objs := mts64.o
+snd-portman2x4-objs := portman2x4.o
 snd-serial-u16550-objs := serial-u16550.o
 snd-virmidi-objs := virmidi.o
 
@@ -15,5 +16,6 @@ obj-$(CONFIG_SND_VIRMIDI) += snd-virmidi.o
 obj-$(CONFIG_SND_SERIAL_U16550) += snd-serial-u16550.o
 obj-$(CONFIG_SND_MTPAV) += snd-mtpav.o
 obj-$(CONFIG_SND_MTS64) += snd-mts64.o
+obj-$(CONFIG_SND_PORTMAN2X4) += snd-portman2x4.o
 
 obj-$(CONFIG_SND) += opl3/ opl4/ mpu401/ vx/
diff --git a/sound/drivers/portman2x4.c b/sound/drivers/portman2x4.c
new file mode 100644
index 00000000000..6c48772aaef
--- /dev/null
+++ b/sound/drivers/portman2x4.c
@@ -0,0 +1,876 @@
+/*
+ *   Driver for Midiman Portman2x4 parallel port midi interface
+ *
+ *   Copyright (c) by Levent Guendogdu <levon@feature-it.com>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * ChangeLog
+ * Jan 24 2007 Matthias Koenig <mkoenig@suse.de>
+ *      - cleanup and rewrite
+ * Sep 30 2004 Tobias Gehrig <tobias@gehrig.tk>
+ *      - source code cleanup
+ * Sep 03 2004 Tobias Gehrig <tobias@gehrig.tk>
+ *      - fixed compilation problem with alsa 1.0.6a (removed MODULE_CLASSES,
+ *        MODULE_PARM_SYNTAX and changed MODULE_DEVICES to
+ *        MODULE_SUPPORTED_DEVICE)
+ * Mar 24 2004 Tobias Gehrig <tobias@gehrig.tk>
+ *      - added 2.6 kernel support
+ * Mar 18 2004 Tobias Gehrig <tobias@gehrig.tk>
+ *      - added parport_unregister_driver to the startup routine if the driver fails to detect a portman
+ *      - added support for all 4 output ports in portman_putmidi
+ * Mar 17 2004 Tobias Gehrig <tobias@gehrig.tk>
+ *      - added checks for opened input device in interrupt handler
+ * Feb 20 2004 Tobias Gehrig <tobias@gehrig.tk>
+ *      - ported from alsa 0.5 to 1.0
+ */
+
+#include <sound/driver.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/parport.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/rawmidi.h>
+#include <sound/control.h>
+
+#define CARD_NAME "Portman 2x4"
+#define DRIVER_NAME "portman"
+#define PLATFORM_DRIVER "snd_portman2x4"
+
+static int index[SNDRV_CARDS]  = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS]   = SNDRV_DEFAULT_STR;
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+static struct platform_device *platform_devices[SNDRV_CARDS]; 
+static int device_count;
+
+module_param_array(index, int, NULL, S_IRUGO);
+MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard.");
+module_param_array(id, charp, NULL, S_IRUGO);
+MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard.");
+module_param_array(enable, bool, NULL, S_IRUGO);
+MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard.");
+
+MODULE_AUTHOR("Levent Guendogdu, Tobias Gehrig, Matthias Koenig");
+MODULE_DESCRIPTION("Midiman Portman2x4");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Midiman,Portman2x4}}");
+
+/*********************************************************************
+ * Chip specific
+ *********************************************************************/
+#define PORTMAN_NUM_INPUT_PORTS 2
+#define PORTMAN_NUM_OUTPUT_PORTS 4
+
+struct portman {
+	spinlock_t reg_lock;
+	struct snd_card *card;
+	struct snd_rawmidi *rmidi;
+	struct pardevice *pardev;
+	int pardev_claimed;
+
+	int open_count;
+	int mode[PORTMAN_NUM_INPUT_PORTS];
+	struct snd_rawmidi_substream *midi_input[PORTMAN_NUM_INPUT_PORTS];
+};
+
+static int portman_free(struct portman *pm)
+{
+	kfree(pm);
+	return 0;
+}
+
+static int __devinit portman_create(struct snd_card *card, 
+				    struct pardevice *pardev, 
+				    struct portman **rchip)
+{
+	struct portman *pm;
+
+	*rchip = NULL;
+
+	pm = kzalloc(sizeof(struct portman), GFP_KERNEL);
+	if (pm == NULL) 
+		return -ENOMEM;
+
+	/* Init chip specific data */
+	spin_lock_init(&pm->reg_lock);
+	pm->card = card;
+	pm->pardev = pardev;
+
+	*rchip = pm;
+
+	return 0;
+}
+
+/*********************************************************************
+ * HW related constants
+ *********************************************************************/
+
+/* Standard PC parallel port status register equates. */
+#define	PP_STAT_BSY   	0x80	/* Busy status.  Inverted. */
+#define	PP_STAT_ACK   	0x40	/* Acknowledge.  Non-Inverted. */
+#define	PP_STAT_POUT  	0x20	/* Paper Out.    Non-Inverted. */
+#define	PP_STAT_SEL   	0x10	/* Select.       Non-Inverted. */
+#define	PP_STAT_ERR   	0x08	/* Error.        Non-Inverted. */
+
+/* Standard PC parallel port command register equates. */
+#define	PP_CMD_IEN  	0x10	/* IRQ Enable.   Non-Inverted. */
+#define	PP_CMD_SELI 	0x08	/* Select Input. Inverted. */
+#define	PP_CMD_INIT 	0x04	/* Init Printer. Non-Inverted. */
+#define	PP_CMD_FEED 	0x02	/* Auto Feed.    Inverted. */
+#define	PP_CMD_STB      0x01	/* Strobe.       Inverted. */
+
+/* Parallel Port Command Register as implemented by PCP2x4. */
+#define	INT_EN	 	PP_CMD_IEN	/* Interrupt enable. */
+#define	STROBE	        PP_CMD_STB	/* Command strobe. */
+
+/* The parallel port command register field (b1..b3) selects the 
+ * various "registers" within the PC/P 2x4.  These are the internal
+ * address of these "registers" that must be written to the parallel
+ * port command register.
+ */
+#define	RXDATA0		(0 << 1)	/* PCP RxData channel 0. */
+#define	RXDATA1		(1 << 1)	/* PCP RxData channel 1. */
+#define	GEN_CTL		(2 << 1)	/* PCP General Control Register. */
+#define	SYNC_CTL 	(3 << 1)	/* PCP Sync Control Register. */
+#define	TXDATA0		(4 << 1)	/* PCP TxData channel 0. */
+#define	TXDATA1		(5 << 1)	/* PCP TxData channel 1. */
+#define	TXDATA2		(6 << 1)	/* PCP TxData channel 2. */
+#define	TXDATA3		(7 << 1)	/* PCP TxData channel 3. */
+
+/* Parallel Port Status Register as implemented by PCP2x4. */
+#define	ESTB		PP_STAT_POUT	/* Echoed strobe. */
+#define	INT_REQ         PP_STAT_ACK	/* Input data int request. */
+#define	BUSY            PP_STAT_ERR	/* Interface Busy. */
+
+/* Parallel Port Status Register BUSY and SELECT lines are multiplexed
+ * between several functions.  Depending on which 2x4 "register" is
+ * currently selected (b1..b3), the BUSY and SELECT lines are
+ * assigned as follows:
+ *
+ *   SELECT LINE:                                                    A3 A2 A1
+ *                                                                   --------
+ */
+#define	RXAVAIL		PP_STAT_SEL	/* Rx Available, channel 0.   0 0 0 */
+//  RXAVAIL1    PP_STAT_SEL             /* Rx Available, channel 1.   0 0 1 */
+#define	SYNC_STAT	PP_STAT_SEL	/* Reserved - Sync Status.    0 1 0 */
+//                                      /* Reserved.                  0 1 1 */
+#define	TXEMPTY		PP_STAT_SEL	/* Tx Empty, channel 0.       1 0 0 */
+//      TXEMPTY1        PP_STAT_SEL     /* Tx Empty, channel 1.       1 0 1 */
+//  TXEMPTY2    PP_STAT_SEL             /* Tx Empty, channel 2.       1 1 0 */
+//  TXEMPTY3    PP_STAT_SEL             /* Tx Empty, channel 3.       1 1 1 */
+
+/*   BUSY LINE:                                                      A3 A2 A1
+ *                                                                   --------
+ */
+#define	RXDATA		PP_STAT_BSY	/* Rx Input Data, channel 0.  0 0 0 */
+//      RXDATA1         PP_STAT_BSY     /* Rx Input Data, channel 1.  0 0 1 */
+#define	SYNC_DATA       PP_STAT_BSY	/* Reserved - Sync Data.      0 1 0 */
+					/* Reserved.                  0 1 1 */
+#define	DATA_ECHO       PP_STAT_BSY	/* Parallel Port Data Echo.   1 0 0 */
+#define	A0_ECHO         PP_STAT_BSY	/* Address 0 Echo.            1 0 1 */
+#define	A1_ECHO         PP_STAT_BSY	/* Address 1 Echo.            1 1 0 */
+#define	A2_ECHO         PP_STAT_BSY	/* Address 2 Echo.            1 1 1 */
+
+#define PORTMAN2X4_MODE_INPUT_TRIGGERED	 0x01
+
+/*********************************************************************
+ * Hardware specific functions
+ *********************************************************************/
+static inline void portman_write_command(struct portman *pm, u8 value)
+{
+	parport_write_control(pm->pardev->port, value);
+}
+
+static inline u8 portman_read_command(struct portman *pm)
+{
+	return parport_read_control(pm->pardev->port);
+}
+
+static inline u8 portman_read_status(struct portman *pm)
+{
+	return parport_read_status(pm->pardev->port);
+}
+
+static inline u8 portman_read_data(struct portman *pm)
+{
+	return parport_read_data(pm->pardev->port);
+}
+
+static inline void portman_write_data(struct portman *pm, u8 value)
+{
+	parport_write_data(pm->pardev->port, value);
+}
+
+static void portman_write_midi(struct portman *pm, 
+			       int port, u8 mididata)
+{
+	int command = ((port + 4) << 1);
+
+	/* Get entering data byte and port number in BL and BH respectively.
+	 * Set up Tx Channel address field for use with PP Cmd Register.
+	 * Store address field in BH register.
+	 * Inputs:      AH = Output port number (0..3).
+	 *              AL = Data byte.
+	 *    command = TXDATA0 | INT_EN;
+	 * Align port num with address field (b1...b3),
+	 * set address for TXDatax, Strobe=0
+	 */
+	command |= INT_EN;
+
+	/* Disable interrupts so that the process is not interrupted, then 
+	 * write the address associated with the current Tx channel to the 
+	 * PP Command Reg.  Do not set the Strobe signal yet.
+	 */
+
+	do {
+		portman_write_command(pm, command);
+
+		/* While the address lines settle, write parallel output data to 
+		 * PP Data Reg.  This has no effect until Strobe signal is asserted.
+		 */
+
+		portman_write_data(pm, mididata);
+		
+		/* If PCP channel's TxEmpty is set (TxEmpty is read through the PP
+		 * Status Register), then go write data.  Else go back and wait.
+		 */
+	} while ((portman_read_status(pm) & TXEMPTY) != TXEMPTY);
+
+	/* TxEmpty is set.  Maintain PC/P destination address and assert
+	 * Strobe through the PP Command Reg.  This will Strobe data into
+	 * the PC/P transmitter and set the PC/P BUSY signal.
+	 */
+
+	portman_write_command(pm, command | STROBE);
+
+	/* Wait for strobe line to settle and echo back through hardware.
+	 * Once it has echoed back, assume that the address and data lines
+	 * have settled!
+	 */
+
+	while ((portman_read_status(pm) & ESTB) == 0)
+		cpu_relax();
+
+	/* Release strobe and immediately re-allow interrupts. */
+	portman_write_command(pm, command);
+
+	while ((portman_read_status(pm) & ESTB) == ESTB)
+		cpu_relax();
+
+	/* PC/P BUSY is now set.  We must wait until BUSY resets itself.
+	 * We'll reenable ints while we're waiting.
+	 */
+
+	while ((portman_read_status(pm) & BUSY) == BUSY)
+		cpu_relax();
+
+	/* Data sent. */
+}
+
+
+/*
+ *  Read MIDI byte from port
+ *  Attempt to read input byte from specified hardware input port (0..).
+ *  Return -1 if no data
+ */
+static int portman_read_midi(struct portman *pm, int port)
+{
+	unsigned char midi_data = 0;
+	unsigned char cmdout;	/* Saved address+IE bit. */
+
+	/* Make sure clocking edge is down before starting... */
+	portman_write_data(pm, 0);	/* Make sure edge is down. */
+
+	/* Set destination address to PCP. */
+	cmdout = (port << 1) | INT_EN;	/* Address + IE + No Strobe. */
+	portman_write_command(pm, cmdout);
+
+	while ((portman_read_status(pm) & ESTB) == ESTB)
+		cpu_relax();	/* Wait for strobe echo. */
+
+	/* After the address lines settle, check multiplexed RxAvail signal.
+	 * If data is available, read it.
+	 */
+	if ((portman_read_status(pm) & RXAVAIL) == 0)
+		return -1;	/* No data. */
+
+	/* Set the Strobe signal to enable the Rx clocking circuitry. */
+	portman_write_command(pm, cmdout | STROBE);	/* Write address+IE+Strobe. */
+
+	while ((portman_read_status(pm) & ESTB) == 0)
+		cpu_relax(); /* Wait for strobe echo. */
+
+	/* The first data bit (msb) is already sitting on the input line. */
+	midi_data = (portman_read_status(pm) & 128);
+	portman_write_data(pm, 1);	/* Cause rising edge, which shifts data. */
+
+	/* Data bit 6. */
+	portman_write_data(pm, 0);	/* Cause falling edge while data settles. */
+	midi_data |= (portman_read_status(pm) >> 1) & 64;
+	portman_write_data(pm, 1);	/* Cause rising edge, which shifts data. */
+
+	/* Data bit 5. */
+	portman_write_data(pm, 0);	/* Cause falling edge while data settles. */
+	midi_data |= (portman_read_status(pm) >> 2) & 32;
+	portman_write_data(pm, 1);	/* Cause rising edge, which shifts data. */
+
+	/* Data bit 4. */
+	portman_write_data(pm, 0);	/* Cause falling edge while data settles. */
+	midi_data |= (portman_read_status(pm) >> 3) & 16;
+	portman_write_data(pm, 1);	/* Cause rising edge, which shifts data. */
+
+	/* Data bit 3. */
+	portman_write_data(pm, 0);	/* Cause falling edge while data settles. */
+	midi_data |= (portman_read_status(pm) >> 4) & 8;
+	portman_write_data(pm, 1);	/* Cause rising edge, which shifts data. */
+
+	/* Data bit 2. */
+	portman_write_data(pm, 0);	/* Cause falling edge while data settles. */
+	midi_data |= (portman_read_status(pm) >> 5) & 4;
+	portman_write_data(pm, 1);	/* Cause rising edge, which shifts data. */
+
+	/* Data bit 1. */
+	portman_write_data(pm, 0);	/* Cause falling edge while data settles. */
+	midi_data |= (portman_read_status(pm) >> 6) & 2;
+	portman_write_data(pm, 1);	/* Cause rising edge, which shifts data. */
+
+	/* Data bit 0. */
+	portman_write_data(pm, 0);	/* Cause falling edge while data settles. */
+	midi_data |= (portman_read_status(pm) >> 7) & 1;
+	portman_write_data(pm, 1);	/* Cause rising edge, which shifts data. */
+	portman_write_data(pm, 0);	/* Return data clock low. */
+
+
+	/* De-assert Strobe and return data. */
+	portman_write_command(pm, cmdout);	/* Output saved address+IE. */
+
+	/* Wait for strobe echo. */
+	while ((portman_read_status(pm) & ESTB) == ESTB)
+		cpu_relax();
+
+	return (midi_data & 255);	/* Shift back and return value. */
+}
+
+/*
+ *  Checks if any input data on the given channel is available
+ *  Checks RxAvail 
+ */
+static int portman_data_avail(struct portman *pm, int channel)
+{
+	int command = INT_EN;
+	switch (channel) {
+	case 0:
+		command |= RXDATA0;
+		break;
+	case 1:
+		command |= RXDATA1;
+		break;
+	}
+	/* Write hardware (assumme STROBE=0) */
+	portman_write_command(pm, command);
+	/* Check multiplexed RxAvail signal */
+	if ((portman_read_status(pm) & RXAVAIL) == RXAVAIL)
+		return 1;	/* Data available */
+
+	/* No Data available */
+	return 0;
+}
+
+
+/*
+ *  Flushes any input
+ */
+static void portman_flush_input(struct portman *pm, unsigned char port)
+{
+	/* Local variable for counting things */
+	unsigned int i = 0;
+	unsigned char command = 0;
+
+	switch (port) {
+	case 0:
+		command = RXDATA0;
+		break;
+	case 1:
+		command = RXDATA1;
+		break;
+	default:
+		snd_printk(KERN_WARNING
+			   "portman_flush_input() Won't flush port %i\n",
+			   port);
+		return;
+	}
+
+	/* Set address for specified channel in port and allow to settle. */
+	portman_write_command(pm, command);
+
+	/* Assert the Strobe and wait for echo back. */
+	portman_write_command(pm, command | STROBE);
+
+	/* Wait for ESTB */
+	while ((portman_read_status(pm) & ESTB) == 0)
+		cpu_relax();
+
+	/* Output clock cycles to the Rx circuitry. */
+	portman_write_data(pm, 0);
+
+	/* Flush 250 bits... */
+	for (i = 0; i < 250; i++) {
+		portman_write_data(pm, 1);
+		portman_write_data(pm, 0);
+	}
+
+	/* Deassert the Strobe signal of the port and wait for it to settle. */
+	portman_write_command(pm, command | INT_EN);
+
+	/* Wait for settling */
+	while ((portman_read_status(pm) & ESTB) == ESTB)
+		cpu_relax();
+}
+
+static int portman_probe(struct parport *p)
+{
+	/* Initialize the parallel port data register.  Will set Rx clocks
+	 * low in case we happen to be addressing the Rx ports at this time.
+	 */
+	/* 1 */
+	parport_write_data(p, 0);
+
+	/* Initialize the parallel port command register, thus initializing
+	 * hardware handshake lines to midi box:
+	 *
+	 *                                  Strobe = 0
+	 *                                  Interrupt Enable = 0            
+	 */
+	/* 2 */
+	parport_write_control(p, 0);
+
+	/* Check if Portman PC/P 2x4 is out there. */
+	/* 3 */
+	parport_write_control(p, RXDATA0);	/* Write Strobe=0 to command reg. */
+
+	/* Check for ESTB to be clear */
+	/* 4 */
+	if ((parport_read_status(p) & ESTB) == ESTB)
+		return 1;	/* CODE 1 - Strobe Failure. */
+
+	/* Set for RXDATA0 where no damage will be done. */
+	/* 5 */
+	parport_write_control(p, RXDATA0 + STROBE);	/* Write Strobe=1 to command reg. */
+
+	/* 6 */
+	if ((parport_read_status(p) & ESTB) != ESTB)
+		return 1;	/* CODE 1 - Strobe Failure. */
+
+	/* 7 */
+	parport_write_control(p, 0);	/* Reset Strobe=0. */
+
+	/* Check if Tx circuitry is functioning properly.  If initialized 
+	 * unit TxEmpty is false, send out char and see if if goes true.
+	 */
+	/* 8 */
+	parport_write_control(p, TXDATA0);	/* Tx channel 0, strobe off. */
+
+	/* If PCP channel's TxEmpty is set (TxEmpty is read through the PP
+	 * Status Register), then go write data.  Else go back and wait.
+	 */
+	/* 9 */
+	if ((parport_read_status(p) & TXEMPTY) == 0)
+		return 2;
+
+	/* Return OK status. */
+	return 0;
+}
+
+static int portman_device_init(struct portman *pm)
+{
+	portman_flush_input(pm, 0);
+	portman_flush_input(pm, 1);
+
+	return 0;
+}
+
+/*********************************************************************
+ * Rawmidi
+ *********************************************************************/
+static int snd_portman_midi_open(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static int snd_portman_midi_close(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static void snd_portman_midi_input_trigger(struct snd_rawmidi_substream *substream,
+					   int up)
+{
+	struct portman *pm = substream->rmidi->private_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pm->reg_lock, flags);
+	if (up)
+		pm->mode[substream->number] |= PORTMAN2X4_MODE_INPUT_TRIGGERED;
+	else
+		pm->mode[substream->number] &= ~PORTMAN2X4_MODE_INPUT_TRIGGERED;
+	spin_unlock_irqrestore(&pm->reg_lock, flags);
+}
+
+static void snd_portman_midi_output_trigger(struct snd_rawmidi_substream *substream,
+					    int up)
+{
+	struct portman *pm = substream->rmidi->private_data;
+	unsigned long flags;
+	unsigned char byte;
+
+	spin_lock_irqsave(&pm->reg_lock, flags);
+	if (up) {
+		while ((snd_rawmidi_transmit(substream, &byte, 1) == 1))
+			portman_write_midi(pm, substream->number, byte);
+	}
+	spin_unlock_irqrestore(&pm->reg_lock, flags);
+}
+
+static struct snd_rawmidi_ops snd_portman_midi_output = {
+	.open =		snd_portman_midi_open,
+	.close =	snd_portman_midi_close,
+	.trigger =	snd_portman_midi_output_trigger,
+};
+
+static struct snd_rawmidi_ops snd_portman_midi_input = {
+	.open =		snd_portman_midi_open,
+	.close =	snd_portman_midi_close,
+	.trigger =	snd_portman_midi_input_trigger,
+};
+
+/* Create and initialize the rawmidi component */
+static int __devinit snd_portman_rawmidi_create(struct snd_card *card)
+{
+	struct portman *pm = card->private_data;
+	struct snd_rawmidi *rmidi;
+	struct snd_rawmidi_substream *substream;
+	int err;
+	
+	err = snd_rawmidi_new(card, CARD_NAME, 0, 
+			      PORTMAN_NUM_OUTPUT_PORTS, 
+			      PORTMAN_NUM_INPUT_PORTS, 
+			      &rmidi);
+	if (err < 0) 
+		return err;
+
+	rmidi->private_data = pm;
+	strcpy(rmidi->name, CARD_NAME);
+	rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT |
+		            SNDRV_RAWMIDI_INFO_INPUT |
+                            SNDRV_RAWMIDI_INFO_DUPLEX;
+
+	pm->rmidi = rmidi;
+
+	/* register rawmidi ops */
+	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, 
+			    &snd_portman_midi_output);
+	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, 
+			    &snd_portman_midi_input);
+
+	/* name substreams */
+	/* output */
+	list_for_each_entry(substream,
+			    &rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT].substreams,
+			    list) {
+		sprintf(substream->name,
+			"Portman2x4 %d", substream->number+1);
+	}
+	/* input */
+	list_for_each_entry(substream,
+			    &rmidi->streams[SNDRV_RAWMIDI_STREAM_INPUT].substreams,
+			    list) {
+		pm->midi_input[substream->number] = substream;
+		sprintf(substream->name,
+			"Portman2x4 %d", substream->number+1);
+	}
+
+	return err;
+}
+
+/*********************************************************************
+ * parport stuff
+ *********************************************************************/
+static void snd_portman_interrupt(int irq, void *userdata)
+{
+	unsigned char midivalue = 0;
+	struct portman *pm = ((struct snd_card*)userdata)->private_data;
+
+	spin_lock(&pm->reg_lock);
+
+	/* While any input data is waiting */
+	while ((portman_read_status(pm) & INT_REQ) == INT_REQ) {
+		/* If data available on channel 0, 
+		   read it and stuff it into the queue. */
+		if (portman_data_avail(pm, 0)) {
+			/* Read Midi */
+			midivalue = portman_read_midi(pm, 0);
+			/* put midi into queue... */
+			if (pm->mode[0] & PORTMAN2X4_MODE_INPUT_TRIGGERED)
+				snd_rawmidi_receive(pm->midi_input[0],
+						    &midivalue, 1);
+
+		}
+		/* If data available on channel 1, 
+		   read it and stuff it into the queue. */
+		if (portman_data_avail(pm, 1)) {
+			/* Read Midi */
+			midivalue = portman_read_midi(pm, 1);
+			/* put midi into queue... */
+			if (pm->mode[1] & PORTMAN2X4_MODE_INPUT_TRIGGERED)
+				snd_rawmidi_receive(pm->midi_input[1],
+						    &midivalue, 1);
+		}
+
+	}
+
+	spin_unlock(&pm->reg_lock);
+}
+
+static int __devinit snd_portman_probe_port(struct parport *p)
+{
+	struct pardevice *pardev;
+	int res;
+
+	pardev = parport_register_device(p, DRIVER_NAME,
+					 NULL, NULL, NULL,
+					 0, NULL);
+	if (!pardev)
+		return -EIO;
+	
+	if (parport_claim(pardev)) {
+		parport_unregister_device(pardev);
+		return -EIO;
+	}
+
+	res = portman_probe(p);
+
+	parport_release(pardev);
+	parport_unregister_device(pardev);
+
+	return res;
+}
+
+static void __devinit snd_portman_attach(struct parport *p)
+{
+	struct platform_device *device;
+
+	device = platform_device_alloc(PLATFORM_DRIVER, device_count);
+	if (!device) 
+		return;
+
+	/* Temporary assignment to forward the parport */
+	platform_set_drvdata(device, p);
+
+	if (platform_device_register(device) < 0) {
+		platform_device_put(device);
+		return;
+	}
+
+	/* Since we dont get the return value of probe
+	 * We need to check if device probing succeeded or not */
+	if (!platform_get_drvdata(device)) {
+		platform_device_unregister(device);
+		return;
+	}
+
+	/* register device in global table */
+	platform_devices[device_count] = device;
+	device_count++;
+}
+
+static void snd_portman_detach(struct parport *p)
+{
+	/* nothing to do here */
+}
+
+static struct parport_driver portman_parport_driver = {
+	.name   = "portman2x4",
+	.attach = snd_portman_attach,
+	.detach = snd_portman_detach
+};
+
+/*********************************************************************
+ * platform stuff
+ *********************************************************************/
+static void snd_portman_card_private_free(struct snd_card *card)
+{
+	struct portman *pm = card->private_data;
+	struct pardevice *pardev = pm->pardev;
+
+	if (pardev) {
+		if (pm->pardev_claimed)
+			parport_release(pardev);
+		parport_unregister_device(pardev);
+	}
+
+	portman_free(pm);
+}
+
+static int __devinit snd_portman_probe(struct platform_device *pdev)
+{
+	struct pardevice *pardev;
+	struct parport *p;
+	int dev = pdev->id;
+	struct snd_card *card = NULL;
+	struct portman *pm = NULL;
+	int err;
+
+	p = platform_get_drvdata(pdev);
+	platform_set_drvdata(pdev, NULL);
+
+	if (dev >= SNDRV_CARDS)
+		return -ENODEV;
+	if (!enable[dev]) 
+		return -ENOENT;
+
+	if ((err = snd_portman_probe_port(p)) < 0)
+		return err;
+
+	card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
+	if (card == NULL) {
+		snd_printd("Cannot create card\n");
+		return -ENOMEM;
+	}
+	strcpy(card->driver, DRIVER_NAME);
+	strcpy(card->shortname, CARD_NAME);
+	sprintf(card->longname,  "%s at 0x%lx, irq %i", 
+		card->shortname, p->base, p->irq);
+
+	pardev = parport_register_device(p,                     /* port */
+					 DRIVER_NAME,           /* name */
+					 NULL,                  /* preempt */
+					 NULL,                  /* wakeup */
+					 snd_portman_interrupt, /* ISR */
+					 PARPORT_DEV_EXCL,      /* flags */
+					 (void *)card);         /* private */
+	if (pardev == NULL) {
+		snd_printd("Cannot register pardevice\n");
+		err = -EIO;
+		goto __err;
+	}
+
+	if ((err = portman_create(card, pardev, &pm)) < 0) {
+		snd_printd("Cannot create main component\n");
+		parport_unregister_device(pardev);
+		goto __err;
+	}
+	card->private_data = pm;
+	card->private_free = snd_portman_card_private_free;
+	
+	if ((err = snd_portman_rawmidi_create(card)) < 0) {
+		snd_printd("Creating Rawmidi component failed\n");
+		goto __err;
+	}
+
+	/* claim parport */
+	if (parport_claim(pardev)) {
+		snd_printd("Cannot claim parport 0x%lx\n", pardev->port->base);
+		err = -EIO;
+		goto __err;
+	}
+	pm->pardev_claimed = 1;
+
+	/* init device */
+	if ((err = portman_device_init(pm)) < 0)
+		goto __err;
+
+	platform_set_drvdata(pdev, card);
+
+	/* At this point card will be usable */
+	if ((err = snd_card_register(card)) < 0) {
+		snd_printd("Cannot register card\n");
+		goto __err;
+	}
+
+	snd_printk(KERN_INFO "Portman 2x4 on 0x%lx\n", p->base);
+	return 0;
+
+__err:
+	snd_card_free(card);
+	return err;
+}
+
+static int snd_portman_remove(struct platform_device *pdev)
+{
+	struct snd_card *card = platform_get_drvdata(pdev);
+
+	if (card)
+		snd_card_free(card);
+
+	return 0;
+}
+
+
+static struct platform_driver snd_portman_driver = {
+	.probe  = snd_portman_probe,
+	.remove = snd_portman_remove,
+	.driver = {
+		.name = PLATFORM_DRIVER
+	}
+};
+
+/*********************************************************************
+ * module init stuff
+ *********************************************************************/
+static void snd_portman_unregister_all(void)
+{
+	int i;
+
+	for (i = 0; i < SNDRV_CARDS; ++i) {
+		if (platform_devices[i]) {
+			platform_device_unregister(platform_devices[i]);
+			platform_devices[i] = NULL;
+		}
+	}		
+	platform_driver_unregister(&snd_portman_driver);
+	parport_unregister_driver(&portman_parport_driver);
+}
+
+static int __init snd_portman_module_init(void)
+{
+	int err;
+
+	if ((err = platform_driver_register(&snd_portman_driver)) < 0)
+		return err;
+
+	if (parport_register_driver(&portman_parport_driver) != 0) {
+		platform_driver_unregister(&snd_portman_driver);
+		return -EIO;
+	}
+
+	if (device_count == 0) {
+		snd_portman_unregister_all();
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __exit snd_portman_module_exit(void)
+{
+	snd_portman_unregister_all();
+}
+
+module_init(snd_portman_module_init);
+module_exit(snd_portman_module_exit);