summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/firewire/Kconfig52
-rw-r--r--drivers/ieee1394/Kconfig19
2 files changed, 30 insertions, 41 deletions
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index d6b1721e52a..13efcd36207 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -1,28 +1,29 @@
-comment "A new alternative FireWire stack is available with EXPERIMENTAL=y"
- depends on EXPERIMENTAL=n
-
-comment "Enable only one of the two stacks, unless you know what you are doing"
- depends on EXPERIMENTAL
+comment "You can enable one or both FireWire driver stacks."
+comment "See the help texts for more information."
config FIREWIRE
- tristate "New FireWire stack, EXPERIMENTAL"
- depends on EXPERIMENTAL
+ tristate "FireWire driver stack"
select CRC_ITU_T
help
- This is the "Juju" FireWire stack, a new alternative implementation
- designed for robustness and simplicity. You can build either this
- stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both.
- Please read http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
- before you enable the new stack.
+ This is the new-generation IEEE 1394 (FireWire) driver stack
+ a.k.a. Juju, a new implementation designed for robustness and
+ simplicity.
+ See http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
+ for information about migration from the older Linux 1394 stack
+ to the new driver stack.
To compile this driver as a module, say M here: the module will be
called firewire-core.
This module functionally replaces ieee1394, raw1394, and video1394.
To access it from application programs, you generally need at least
- libraw1394 version 2. IIDC/DCAM applications also need libdc1394
- version 2. No libraries are required to access storage devices
- through the firewire-sbp2 driver.
+ libraw1394 v2. IIDC/DCAM applications need libdc1394 v2.
+ No libraries are required to access storage devices through the
+ firewire-sbp2 driver.
+
+ NOTE:
+ FireWire audio devices currently require the old drivers (ieee1394,
+ ohci1394, raw1394).
config FIREWIRE_OHCI
tristate "OHCI-1394 controllers"
@@ -37,11 +38,9 @@ config FIREWIRE_OHCI
stack.
NOTE:
-
- You should only build either firewire-ohci or the old ohci1394 driver,
- but not both. If you nevertheless want to install both, you should
- configure them only as modules and blacklist the driver(s) which you
- don't want to have auto-loaded. Add either
+ If you want to install firewire-ohci and ohci1394 together, you
+ should configure them only as modules and blacklist the driver(s)
+ which you don't want to have auto-loaded. Add either
blacklist firewire-ohci
or
@@ -50,12 +49,7 @@ config FIREWIRE_OHCI
blacklist dv1394
to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
- depending on your distribution. The latter two modules should be
- blacklisted together with ohci1394 because they depend on ohci1394.
-
- If you have an old modprobe which doesn't implement the blacklist
- directive, use "install modulename /bin/true" for the modules to be
- blacklisted.
+ depending on your distribution.
config FIREWIRE_OHCI_DEBUG
bool
@@ -79,13 +73,15 @@ config FIREWIRE_SBP2
configuration section.
config FIREWIRE_NET
- tristate "IP networking over 1394"
- depends on FIREWIRE && INET
+ tristate "IP networking over 1394 (EXPERIMENTAL)"
+ depends on FIREWIRE && INET && EXPERIMENTAL
help
This enables IPv4 over IEEE 1394, providing IP connectivity with
other implementations of RFC 2734 as found on several operating
systems. Multicast support is currently limited.
+ NOTE, this driver is not stable yet!
+
To compile this driver as a module, say M here: The module will be
called firewire-net. It replaces eth1394 of the classic IEEE 1394
stack.
diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
index 584245881f4..f102fcc7e52 100644
--- a/drivers/ieee1394/Kconfig
+++ b/drivers/ieee1394/Kconfig
@@ -4,7 +4,7 @@ menu "IEEE 1394 (FireWire) support"
source "drivers/firewire/Kconfig"
config IEEE1394
- tristate "Stable FireWire stack"
+ tristate "Legacy alternative FireWire driver stack"
depends on PCI || BROKEN
help
IEEE 1394 describes a high performance serial bus, which is also
@@ -33,11 +33,9 @@ config IEEE1394_OHCI1394
module will be called ohci1394.
NOTE:
-
- You should only build either ohci1394 or the new firewire-ohci driver,
- but not both. If you nevertheless want to install both, you should
- configure them only as modules and blacklist the driver(s) which you
- don't want to have auto-loaded. Add either
+ If you want to install firewire-ohci and ohci1394 together, you
+ should configure them only as modules and blacklist the driver(s)
+ which you don't want to have auto-loaded. Add either
blacklist firewire-ohci
or
@@ -46,12 +44,7 @@ config IEEE1394_OHCI1394
blacklist dv1394
to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
- depending on your distribution. The latter two modules should be
- blacklisted together with ohci1394 because they depend on ohci1394.
-
- If you have an old modprobe which doesn't implement the blacklist
- directive, use "install modulename /bin/true" for the modules to be
- blacklisted.
+ depending on your distribution.
comment "PCILynx controller requires I2C"
depends on IEEE1394 && I2C=n
@@ -105,7 +98,7 @@ config IEEE1394_ETH1394_ROM_ENTRY
default n
config IEEE1394_ETH1394
- tristate "IP networking over 1394"
+ tristate "IP networking over 1394 (experimental)"
depends on IEEE1394 && EXPERIMENTAL && INET
select IEEE1394_ETH1394_ROM_ENTRY
help