diff options
-rw-r--r-- | Documentation/devicetree/bindings/gpio/led.txt | 6 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/vendor-prefixes.txt | 1 | ||||
-rw-r--r-- | Documentation/hwmon/jc42 | 26 | ||||
-rw-r--r-- | arch/arm/boot/.gitignore | 1 | ||||
-rw-r--r-- | arch/arm/mach-omap2/id.c | 1 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap4-common.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/twl-common.c | 1 | ||||
-rw-r--r-- | arch/arm/mach-s3c2440/s3c244x.c | 1 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/irqs.h | 10 | ||||
-rw-r--r-- | drivers/hwmon/Kconfig | 5 | ||||
-rw-r--r-- | drivers/hwmon/jc42.c | 30 | ||||
-rw-r--r-- | drivers/hwmon/pmbus/pmbus_core.c | 3 | ||||
-rw-r--r-- | drivers/hwmon/pmbus/zl6100.c | 10 | ||||
-rw-r--r-- | drivers/md/dm-flakey.c | 2 | ||||
-rw-r--r-- | drivers/md/dm-io.c | 23 | ||||
-rw-r--r-- | drivers/md/dm-ioctl.c | 2 | ||||
-rw-r--r-- | drivers/md/dm-raid.c | 17 | ||||
-rw-r--r-- | drivers/md/dm-thin-metadata.c | 25 | ||||
-rw-r--r-- | drivers/of/fdt.c | 1 | ||||
-rw-r--r-- | drivers/of/of_mdio.c | 2 | ||||
-rw-r--r-- | drivers/regulator/tps65910-regulator.c | 2 | ||||
-rw-r--r-- | drivers/spi/spi-pl022.c | 2 | ||||
-rw-r--r-- | include/linux/of.h | 8 |
23 files changed, 137 insertions, 44 deletions
diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt index 141087cf310..fd2bd56e719 100644 --- a/Documentation/devicetree/bindings/gpio/led.txt +++ b/Documentation/devicetree/bindings/gpio/led.txt @@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds device. Each node's name represents the name of the corresponding LED. LED sub-node properties: -- gpios : Should specify the LED's GPIO, see "Specifying GPIO information - for devices" in Documentation/devicetree/booting-without-of.txt. Active - low LEDs should be indicated using flags in the GPIO specifier. +- gpios : Should specify the LED's GPIO, see "gpios property" in + Documentation/devicetree/gpio.txt. Active low LEDs should be + indicated using flags in the GPIO specifier. - label : (optional) The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). - linux,default-trigger : (optional) This parameter, if present, is a diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ecc6a6cd26c..a20008ab319 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -30,6 +30,7 @@ national National Semiconductor nintendo Nintendo nvidia NVIDIA nxp NXP Semiconductors +picochip Picochip Ltd powervr Imagination Technologies qcom Qualcomm, Inc. ramtron Ramtron International diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42 index a22ecf48f25..52729a756c1 100644 --- a/Documentation/hwmon/jc42 +++ b/Documentation/hwmon/jc42 @@ -7,21 +7,29 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1f Datasheets: http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf - * IDT TSE2002B3, TS3000B3 - Prefix: 'tse2002b3', 'ts3000b3' + * Atmel AT30TS00 + Prefix: 'at30ts00' Addresses scanned: I2C 0x18 - 0x1f Datasheets: - http://www.idt.com/products/getdoc.cfm?docid=18715691 - http://www.idt.com/products/getdoc.cfm?docid=18715692 + http://www.atmel.com/Images/doc8585.pdf + * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2 + Prefix: 'tse2002', 'ts3000' + Addresses scanned: I2C 0x18 - 0x1f + Datasheets: + http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf + http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf + http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf + http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf * Maxim MAX6604 Prefix: 'max6604' Addresses scanned: I2C 0x18 - 0x1f Datasheets: http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf - * Microchip MCP9805, MCP98242, MCP98243, MCP9843 - Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843' + * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843 + Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843' Addresses scanned: I2C 0x18 - 0x1f Datasheets: + http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf @@ -48,6 +56,12 @@ Supported chips: Datasheets: http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf + * ST Microelectronics STTS2002, STTS3000 + Prefix: 'stts2002', 'stts3000' + Addresses scanned: I2C 0x18 - 0x1f + Datasheets: + http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf + http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf * JEDEC JC 42.4 compliant temperature sensor chips Prefix: 'jc42' Addresses scanned: I2C 0x18 - 0x1f diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore index ce1c5ff746e..3c79f85975a 100644 --- a/arch/arm/boot/.gitignore +++ b/arch/arm/boot/.gitignore @@ -3,3 +3,4 @@ zImage xipImage bootpImage uImage +*.dtb diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 6c5826605ea..719ee423abe 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev) case 0xb944: omap_revision = AM335X_REV_ES1_0; *cpu_rev = "1.0"; + break; case 0xb8f2: switch (rev) { case 0: diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index ebc59509131..70de277f5c1 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -31,6 +31,7 @@ #include "common.h" #include "omap4-sar-layout.h" +#include <linux/export.h> #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; @@ -55,6 +56,7 @@ void omap_bus_sync(void) isb(); } } +EXPORT_SYMBOL(omap_bus_sync); /* Steal one page physical memory for barrier implementation */ int __init omap_barrier_reserve_memblock(void) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 10b20c652e5..4b57757bf9d 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = { .constraints = { .min_uV = 3300000, .max_uV = 3300000, - .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c index 744930a870e..d15852f642b 100644 --- a/arch/arm/mach-s3c2440/s3c244x.c +++ b/arch/arm/mach-s3c2440/s3c244x.c @@ -207,3 +207,4 @@ void s3c244x_restart(char mode, const char *cmd) /* we'll take a jump through zero as a poor second */ soft_restart(0); +} diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 2efd6454bce..37bbbbb981b 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -428,8 +428,16 @@ #define OMAP_GPMC_NR_IRQS 8 #define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) +/* PRCM IRQ handler */ +#ifdef CONFIG_ARCH_OMAP2PLUS +#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END) +#define OMAP_PRCM_NR_IRQS 64 +#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS) +#else +#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END +#endif -#define NR_IRQS OMAP_GPMC_IRQ_END +#define NR_IRQS OMAP_PRCM_IRQ_END #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 02260406b9e..dad895fec62 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -497,8 +497,9 @@ config SENSORS_JC42 If you say yes here, you get support for JEDEC JC42.4 compliant temperature sensors, which are used on many DDR3 memory modules for mobile devices and servers. Support will include, but not be limited - to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243, - MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3. + to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, + MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002, + STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2. This driver can also be built as a module. If so, the module will be called jc42. diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index 28c09eead36..b927ee5ccdd 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -64,6 +64,7 @@ static const unsigned short normal_i2c[] = { /* Manufacturer IDs */ #define ADT_MANID 0x11d4 /* Analog Devices */ +#define ATMEL_MANID 0x001f /* Atmel */ #define MAX_MANID 0x004d /* Maxim */ #define IDT_MANID 0x00b3 /* IDT */ #define MCP_MANID 0x0054 /* Microchip */ @@ -77,15 +78,25 @@ static const unsigned short normal_i2c[] = { #define ADT7408_DEVID 0x0801 #define ADT7408_DEVID_MASK 0xffff +/* Atmel */ +#define AT30TS00_DEVID 0x8201 +#define AT30TS00_DEVID_MASK 0xffff + /* IDT */ #define TS3000B3_DEVID 0x2903 /* Also matches TSE2002B3 */ #define TS3000B3_DEVID_MASK 0xffff +#define TS3000GB2_DEVID 0x2912 /* Also matches TSE2002GB2 */ +#define TS3000GB2_DEVID_MASK 0xffff + /* Maxim */ #define MAX6604_DEVID 0x3e00 #define MAX6604_DEVID_MASK 0xffff /* Microchip */ +#define MCP9804_DEVID 0x0200 +#define MCP9804_DEVID_MASK 0xfffc + #define MCP98242_DEVID 0x2000 #define MCP98242_DEVID_MASK 0xfffc @@ -113,6 +124,12 @@ static const unsigned short normal_i2c[] = { #define STTS424E_DEVID 0x0000 #define STTS424E_DEVID_MASK 0xfffe +#define STTS2002_DEVID 0x0300 +#define STTS2002_DEVID_MASK 0xffff + +#define STTS3000_DEVID 0x0200 +#define STTS3000_DEVID_MASK 0xffff + static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 }; struct jc42_chips { @@ -123,8 +140,11 @@ struct jc42_chips { static struct jc42_chips jc42_chips[] = { { ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK }, + { ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK }, { IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK }, + { IDT_MANID, TS3000GB2_DEVID, TS3000GB2_DEVID_MASK }, { MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK }, + { MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK }, { MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK }, { MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK }, { MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK }, @@ -133,6 +153,8 @@ static struct jc42_chips jc42_chips[] = { { NXP_MANID, SE98_DEVID, SE98_DEVID_MASK }, { STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK }, { STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK }, + { STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK }, + { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK }, }; /* Each client has this additional data */ @@ -159,10 +181,12 @@ static struct jc42_data *jc42_update_device(struct device *dev); static const struct i2c_device_id jc42_id[] = { { "adt7408", 0 }, + { "at30ts00", 0 }, { "cat94ts02", 0 }, { "cat6095", 0 }, { "jc42", 0 }, { "max6604", 0 }, + { "mcp9804", 0 }, { "mcp9805", 0 }, { "mcp98242", 0 }, { "mcp98243", 0 }, @@ -171,8 +195,10 @@ static const struct i2c_device_id jc42_id[] = { { "se97b", 0 }, { "se98", 0 }, { "stts424", 0 }, - { "tse2002b3", 0 }, - { "ts3000b3", 0 }, + { "stts2002", 0 }, + { "stts3000", 0 }, + { "tse2002", 0 }, + { "ts3000", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, jc42_id); diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 00460d8d842..d89b33967a8 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -54,7 +54,8 @@ lcrit_alarm, crit_alarm */ #define PMBUS_IOUT_BOOLEANS_PER_PAGE 3 /* alarm, lcrit_alarm, crit_alarm */ -#define PMBUS_POUT_BOOLEANS_PER_PAGE 2 /* alarm, crit_alarm */ +#define PMBUS_POUT_BOOLEANS_PER_PAGE 3 /* cap_alarm, alarm, crit_alarm + */ #define PMBUS_MAX_BOOLEANS_PER_FAN 2 /* alarm, fault */ #define PMBUS_MAX_BOOLEANS_PER_TEMP 4 /* min_alarm, max_alarm, lcrit_alarm, crit_alarm */ diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c index 48c7b4a716a..880b90cf4d3 100644 --- a/drivers/hwmon/pmbus/zl6100.c +++ b/drivers/hwmon/pmbus/zl6100.c @@ -33,6 +33,7 @@ enum chips { zl2004, zl2005, zl2006, zl2008, zl2105, zl2106, zl6100, zl6105 }; struct zl6100_data { int id; ktime_t access; /* chip access time */ + int delay; /* Delay between chip accesses in uS */ struct pmbus_driver_info info; }; @@ -52,10 +53,10 @@ MODULE_PARM_DESC(delay, "Delay between chip accesses in uS"); /* Some chips need a delay between accesses */ static inline void zl6100_wait(const struct zl6100_data *data) { - if (delay) { + if (data->delay) { s64 delta = ktime_us_delta(ktime_get(), data->access); - if (delta < delay) - udelay(delay - delta); + if (delta < data->delay) + udelay(data->delay - delta); } } @@ -207,8 +208,9 @@ static int zl6100_probe(struct i2c_client *client, * can be cleared later for additional chips if tests show that it * is not needed (in other words, better be safe than sorry). */ + data->delay = delay; if (data->id == zl2004 || data->id == zl6105) - delay = 0; + data->delay = 0; /* * Since there was a direct I2C device access above, wait before diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c index 9fb18c14782..b280c433e4a 100644 --- a/drivers/md/dm-flakey.c +++ b/drivers/md/dm-flakey.c @@ -323,7 +323,7 @@ static int flakey_end_io(struct dm_target *ti, struct bio *bio, * Corrupt successful READs while in down state. * If flags were specified, only corrupt those that match. */ - if (!error && bio_submitted_while_down && + if (fc->corrupt_bio_byte && !error && bio_submitted_while_down && (bio_data_dir(bio) == READ) && (fc->corrupt_bio_rw == READ) && all_corrupt_bio_flags_match(bio, fc)) corrupt_bio_data(bio, fc); diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index ad2eba40e31..ea5dd289fe2 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -296,6 +296,8 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where, unsigned offset; unsigned num_bvecs; sector_t remaining = where->count; + struct request_queue *q = bdev_get_queue(where->bdev); + sector_t discard_sectors; /* * where->count may be zero if rw holds a flush and we need to @@ -305,9 +307,12 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where, /* * Allocate a suitably sized-bio. */ - num_bvecs = dm_sector_div_up(remaining, - (PAGE_SIZE >> SECTOR_SHIFT)); - num_bvecs = min_t(int, bio_get_nr_vecs(where->bdev), num_bvecs); + if (rw & REQ_DISCARD) + num_bvecs = 1; + else + num_bvecs = min_t(int, bio_get_nr_vecs(where->bdev), + dm_sector_div_up(remaining, (PAGE_SIZE >> SECTOR_SHIFT))); + bio = bio_alloc_bioset(GFP_NOIO, num_bvecs, io->client->bios); bio->bi_sector = where->sector + (where->count - remaining); bio->bi_bdev = where->bdev; @@ -315,10 +320,14 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where, bio->bi_destructor = dm_bio_destructor; store_io_and_region_in_bio(bio, io, region); - /* - * Try and add as many pages as possible. - */ - while (remaining) { + if (rw & REQ_DISCARD) { + discard_sectors = min_t(sector_t, q->limits.max_discard_sectors, remaining); + bio->bi_size = discard_sectors << SECTOR_SHIFT; + remaining -= discard_sectors; + } else while (remaining) { + /* + * Try and add as many pages as possible. + */ dp->get_page(dp, &page, &len, &offset); len = min(len, to_bytes(remaining)); if (!bio_add_page(bio, page, len, offset)) diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index 31c2dc25886..1ce84ed0b76 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -1437,7 +1437,7 @@ static int target_message(struct dm_ioctl *param, size_t param_size) if (!argc) { DMWARN("Empty message received."); - goto out; + goto out_argv; } table = dm_get_live_table(md); diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index 86cb7e5d83d..787022c1818 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -668,7 +668,14 @@ static int super_load(struct md_rdev *rdev, struct md_rdev *refdev) return ret; sb = page_address(rdev->sb_page); - if (sb->magic != cpu_to_le32(DM_RAID_MAGIC)) { + + /* + * Two cases that we want to write new superblocks and rebuild: + * 1) New device (no matching magic number) + * 2) Device specified for rebuild (!In_sync w/ offset == 0) + */ + if ((sb->magic != cpu_to_le32(DM_RAID_MAGIC)) || + (!test_bit(In_sync, &rdev->flags) && !rdev->recovery_offset)) { super_sync(rdev->mddev, rdev); set_bit(FirstUse, &rdev->flags); @@ -745,11 +752,8 @@ static int super_init_validation(struct mddev *mddev, struct md_rdev *rdev) */ rdev_for_each(r, t, mddev) { if (!test_bit(In_sync, &r->flags)) { - if (!test_bit(FirstUse, &r->flags)) - DMERR("Superblock area of " - "rebuild device %d should have been " - "cleared.", r->raid_disk); - set_bit(FirstUse, &r->flags); + DMINFO("Device %d specified for rebuild: " + "Clearing superblock", r->raid_disk); rebuilds++; } else if (test_bit(FirstUse, &r->flags)) new_devs++; @@ -971,6 +975,7 @@ static int raid_ctr(struct dm_target *ti, unsigned argc, char **argv) INIT_WORK(&rs->md.event_work, do_table_event); ti->private = rs; + ti->num_flush_requests = 1; mutex_lock(&rs->md.reconfig_mutex); ret = md_run(&rs->md); diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 59c4f0446ff..237571af77f 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -385,6 +385,7 @@ static int init_pmd(struct dm_pool_metadata *pmd, data_sm = dm_sm_disk_create(tm, nr_blocks); if (IS_ERR(data_sm)) { DMERR("sm_disk_create failed"); + dm_tm_unlock(tm, sblock); r = PTR_ERR(data_sm); goto bad; } @@ -789,6 +790,11 @@ int dm_pool_metadata_close(struct dm_pool_metadata *pmd) return 0; } +/* + * __open_device: Returns @td corresponding to device with id @dev, + * creating it if @create is set and incrementing @td->open_count. + * On failure, @td is undefined. + */ static int __open_device(struct dm_pool_metadata *pmd, dm_thin_id dev, int create, struct dm_thin_device **td) @@ -799,10 +805,16 @@ static int __open_device(struct dm_pool_metadata *pmd, struct disk_device_details details_le; /* - * Check the device isn't already open. + * If the device is already open, return it. */ list_for_each_entry(td2, &pmd->thin_devices, list) if (td2->id == dev) { + /* + * May not create an already-open device. + */ + if (create) + return -EEXIST; + td2->open_count++; *td = td2; return 0; @@ -817,6 +829,9 @@ static int __open_device(struct dm_pool_metadata *pmd, if (r != -ENODATA || !create) return r; + /* + * Create new device. + */ changed = 1; details_le.mapped_blocks = 0; details_le.transaction_id = cpu_to_le64(pmd->trans_id); @@ -882,12 +897,10 @@ static int __create_thin(struct dm_pool_metadata *pmd, r = __open_device(pmd, dev, 1, &td); if (r) { - __close_device(td); dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root); dm_btree_del(&pmd->bl_info, dev_root); return r; } - td->changed = 1; __close_device(td); return r; @@ -967,14 +980,14 @@ static int __create_snap(struct dm_pool_metadata *pmd, goto bad; r = __set_snapshot_details(pmd, td, origin, pmd->time); + __close_device(td); + if (r) goto bad; - __close_device(td); return 0; bad: - __close_device(td); dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root); dm_btree_remove(&pmd->details_info, pmd->details_root, &key, &pmd->details_root); @@ -1211,6 +1224,8 @@ static int __remove(struct dm_thin_device *td, dm_block_t block) if (r) return r; + td->mapped_blocks--; + td->changed = 1; pmd->need_commit = 1; return 0; diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index ea2bd1be264..91a375fb6ae 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -23,7 +23,6 @@ #include <asm/machdep.h> #endif /* CONFIG_PPC */ -#include <asm/setup.h> #include <asm/page.h> char *of_fdt_get_string(struct boot_param_header *blob, u32 offset) diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 980c079e444..483c0adcad8 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -182,7 +182,7 @@ struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, if (!phy_id || sz < sizeof(*phy_id)) return NULL; - sprintf(bus_id, PHY_ID_FMT, "0", be32_to_cpu(phy_id[0])); + sprintf(bus_id, PHY_ID_FMT, "fixed-0", be32_to_cpu(phy_id[0])); phy = phy_connect(dev, bus_id, hndlr, 0, iface); return IS_ERR(phy) ? NULL : phy; diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index 5c15ba01e9c..40ecf516589 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -662,7 +662,7 @@ static int tps65910_set_voltage_dcdc(struct regulator_dev *dev, tps65910_reg_write(pmic, TPS65910_VDD2_OP, vsel); break; case TPS65911_REG_VDDCTRL: - vsel = selector; + vsel = selector + 3; tps65910_reg_write(pmic, TPS65911_VDDCTRL_OP, vsel); } diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 2f9cb43a239..f37ad2271ad 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1083,7 +1083,7 @@ err_alloc_rx_sg: return -ENOMEM; } -static int __init pl022_dma_probe(struct pl022 *pl022) +static int __devinit pl022_dma_probe(struct pl022 *pl022) { dma_cap_mask_t mask; diff --git a/include/linux/of.h b/include/linux/of.h index a75a831e205..92cf6ad35e0 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -281,6 +281,14 @@ static inline struct property *of_find_property(const struct device_node *np, return NULL; } +static inline struct device_node *of_find_compatible_node( + struct device_node *from, + const char *type, + const char *compat) +{ + return NULL; +} + static inline int of_property_read_u32_array(const struct device_node *np, const char *propname, u32 *out_values, size_t sz) |