summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS16
-rw-r--r--arch/unicore32/.gitignore21
-rw-r--r--arch/unicore32/Kconfig275
-rw-r--r--arch/unicore32/Kconfig.debug68
-rw-r--r--arch/unicore32/Makefile95
-rw-r--r--arch/unicore32/boot/Makefile47
-rw-r--r--arch/unicore32/boot/compressed/Makefile68
-rw-r--r--arch/unicore32/boot/compressed/head.S204
-rw-r--r--arch/unicore32/boot/compressed/misc.c126
-rw-r--r--arch/unicore32/boot/compressed/piggy.S.in6
-rw-r--r--arch/unicore32/boot/compressed/vmlinux.lds.in61
-rw-r--r--arch/unicore32/configs/debug_defconfig215
-rw-r--r--arch/unicore32/include/asm/Kbuild2
-rw-r--r--arch/unicore32/include/asm/assembler.h131
-rw-r--r--arch/unicore32/include/asm/bitops.h47
-rw-r--r--arch/unicore32/include/asm/byteorder.h24
-rw-r--r--arch/unicore32/include/asm/cache.h27
-rw-r--r--arch/unicore32/include/asm/cacheflush.h211
-rw-r--r--arch/unicore32/include/asm/checksum.h41
-rw-r--r--arch/unicore32/include/asm/cpu-single.h45
-rw-r--r--arch/unicore32/include/asm/cputype.h33
-rw-r--r--arch/unicore32/include/asm/delay.h52
-rw-r--r--arch/unicore32/include/asm/dma-mapping.h124
-rw-r--r--arch/unicore32/include/asm/dma.h23
-rw-r--r--arch/unicore32/include/asm/elf.h94
-rw-r--r--arch/unicore32/include/asm/fpstate.h26
-rw-r--r--arch/unicore32/include/asm/fpu-ucf64.h53
-rw-r--r--arch/unicore32/include/asm/futex.h143
-rw-r--r--arch/unicore32/include/asm/gpio.h104
-rw-r--r--arch/unicore32/include/asm/hwcap.h32
-rw-r--r--arch/unicore32/include/asm/io.h55
-rw-r--r--arch/unicore32/include/asm/irq.h105
-rw-r--r--arch/unicore32/include/asm/irqflags.h53
-rw-r--r--arch/unicore32/include/asm/linkage.h22
-rw-r--r--arch/unicore32/include/asm/memblock.h46
-rw-r--r--arch/unicore32/include/asm/memory.h123
-rw-r--r--arch/unicore32/include/asm/mmu.h17
-rw-r--r--arch/unicore32/include/asm/mmu_context.h87
-rw-r--r--arch/unicore32/include/asm/mutex.h20
-rw-r--r--arch/unicore32/include/asm/page.h80
-rw-r--r--arch/unicore32/include/asm/pci.h46
-rw-r--r--arch/unicore32/include/asm/pgalloc.h110
-rw-r--r--arch/unicore32/include/asm/pgtable-hwdef.h55
-rw-r--r--arch/unicore32/include/asm/pgtable.h317
-rw-r--r--arch/unicore32/include/asm/processor.h92
-rw-r--r--arch/unicore32/include/asm/ptrace.h133
-rw-r--r--arch/unicore32/include/asm/sigcontext.h29
-rw-r--r--arch/unicore32/include/asm/stacktrace.h31
-rw-r--r--arch/unicore32/include/asm/string.h38
-rw-r--r--arch/unicore32/include/asm/suspend.h30
-rw-r--r--arch/unicore32/include/asm/system.h161
-rw-r--r--arch/unicore32/include/asm/thread_info.h154
-rw-r--r--arch/unicore32/include/asm/timex.h34
-rw-r--r--arch/unicore32/include/asm/tlb.h28
-rw-r--r--arch/unicore32/include/asm/tlbflush.h195
-rw-r--r--arch/unicore32/include/asm/traps.h21
-rw-r--r--arch/unicore32/include/asm/uaccess.h47
-rw-r--r--arch/unicore32/include/asm/unistd.h18
-rw-r--r--arch/unicore32/include/mach/PKUnity.h108
-rw-r--r--arch/unicore32/include/mach/bitfield.h24
-rw-r--r--arch/unicore32/include/mach/dma.h48
-rw-r--r--arch/unicore32/include/mach/hardware.h38
-rw-r--r--arch/unicore32/include/mach/map.h20
-rw-r--r--arch/unicore32/include/mach/memory.h58
-rw-r--r--arch/unicore32/include/mach/ocd.h36
-rw-r--r--arch/unicore32/include/mach/pm.h43
-rw-r--r--arch/unicore32/include/mach/regs-ac97.h32
-rw-r--r--arch/unicore32/include/mach/regs-dmac.h81
-rw-r--r--arch/unicore32/include/mach/regs-gpio.h70
-rw-r--r--arch/unicore32/include/mach/regs-i2c.h63
-rw-r--r--arch/unicore32/include/mach/regs-intc.h28
-rw-r--r--arch/unicore32/include/mach/regs-nand.h79
-rw-r--r--arch/unicore32/include/mach/regs-ost.h92
-rw-r--r--arch/unicore32/include/mach/regs-pci.h94
-rw-r--r--arch/unicore32/include/mach/regs-pm.h126
-rw-r--r--arch/unicore32/include/mach/regs-ps2.h20
-rw-r--r--arch/unicore32/include/mach/regs-resetc.h34
-rw-r--r--arch/unicore32/include/mach/regs-rtc.h37
-rw-r--r--arch/unicore32/include/mach/regs-sdc.h156
-rw-r--r--arch/unicore32/include/mach/regs-spi.h98
-rw-r--r--arch/unicore32/include/mach/regs-uart.h3
-rw-r--r--arch/unicore32/include/mach/regs-umal.h229
-rw-r--r--arch/unicore32/include/mach/regs-unigfx.h200
-rw-r--r--arch/unicore32/include/mach/uncompress.h34
-rw-r--r--arch/unicore32/kernel/Makefile33
-rw-r--r--arch/unicore32/kernel/asm-offsets.c112
-rw-r--r--arch/unicore32/kernel/clock.c390
-rw-r--r--arch/unicore32/kernel/cpu-ucv2.c93
-rw-r--r--arch/unicore32/kernel/debug-macro.S89
-rw-r--r--arch/unicore32/kernel/debug.S85
-rw-r--r--arch/unicore32/kernel/dma.c183
-rw-r--r--arch/unicore32/kernel/early_printk.c59
-rw-r--r--arch/unicore32/kernel/elf.c38
-rw-r--r--arch/unicore32/kernel/entry.S824
-rw-r--r--arch/unicore32/kernel/fpu-ucf64.c126
-rw-r--r--arch/unicore32/kernel/gpio.c122
-rw-r--r--arch/unicore32/kernel/head.S252
-rw-r--r--arch/unicore32/kernel/hibernate.c160
-rw-r--r--arch/unicore32/kernel/hibernate_asm.S117
-rw-r--r--arch/unicore32/kernel/init_task.c44
-rw-r--r--arch/unicore32/kernel/irq.c426
-rw-r--r--arch/unicore32/kernel/ksyms.c99
-rw-r--r--arch/unicore32/kernel/ksyms.h15
-rw-r--r--arch/unicore32/kernel/module.c152
-rw-r--r--arch/unicore32/kernel/pci.c404
-rw-r--r--arch/unicore32/kernel/pm.c123
-rw-r--r--arch/unicore32/kernel/process.c389
-rw-r--r--arch/unicore32/kernel/ptrace.c149
-rw-r--r--arch/unicore32/kernel/puv3-core.c285
-rw-r--r--arch/unicore32/kernel/puv3-nb0916.c145
-rw-r--r--arch/unicore32/kernel/pwm.c263
-rw-r--r--arch/unicore32/kernel/rtc.c380
-rw-r--r--arch/unicore32/kernel/setup.c360
-rw-r--r--arch/unicore32/kernel/setup.h30
-rw-r--r--arch/unicore32/kernel/signal.c494
-rw-r--r--arch/unicore32/kernel/sleep.S202
-rw-r--r--arch/unicore32/kernel/stacktrace.c131
-rw-r--r--arch/unicore32/kernel/sys.c126
-rw-r--r--arch/unicore32/kernel/time.c143
-rw-r--r--arch/unicore32/kernel/traps.c333
-rw-r--r--arch/unicore32/kernel/vmlinux.lds.S61
-rw-r--r--arch/unicore32/lib/Makefile27
-rw-r--r--arch/unicore32/lib/backtrace.S163
-rw-r--r--arch/unicore32/lib/clear_user.S57
-rw-r--r--arch/unicore32/lib/copy_from_user.S108
-rw-r--r--arch/unicore32/lib/copy_page.S39
-rw-r--r--arch/unicore32/lib/copy_template.S214
-rw-r--r--arch/unicore32/lib/copy_to_user.S96
-rw-r--r--arch/unicore32/lib/delay.S51
-rw-r--r--arch/unicore32/lib/findbit.S98
-rw-r--r--arch/unicore32/lib/strncpy_from_user.S45
-rw-r--r--arch/unicore32/lib/strnlen_user.S42
-rw-r--r--arch/unicore32/mm/Kconfig50
-rw-r--r--arch/unicore32/mm/Makefile15
-rw-r--r--arch/unicore32/mm/alignment.c523
-rw-r--r--arch/unicore32/mm/cache-ucv2.S212
-rw-r--r--arch/unicore32/mm/dma-swiotlb.c34
-rw-r--r--arch/unicore32/mm/extable.c24
-rw-r--r--arch/unicore32/mm/fault.c479
-rw-r--r--arch/unicore32/mm/flush.c98
-rw-r--r--arch/unicore32/mm/init.c517
-rw-r--r--arch/unicore32/mm/ioremap.c261
-rw-r--r--arch/unicore32/mm/mm.h39
-rw-r--r--arch/unicore32/mm/mmu.c533
-rw-r--r--arch/unicore32/mm/pgd.c102
-rw-r--r--arch/unicore32/mm/proc-macros.S145
-rw-r--r--arch/unicore32/mm/proc-syms.c23
-rw-r--r--arch/unicore32/mm/proc-ucv2.S134
-rw-r--r--arch/unicore32/mm/tlb-ucv2.S89
-rw-r--r--drivers/i2c/busses/Kconfig11
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-puv3.c306
-rw-r--r--drivers/input/serio/i8042-unicore32io.h73
-rw-r--r--drivers/input/serio/i8042.h2
-rw-r--r--drivers/pci/Makefile1
-rw-r--r--drivers/video/Kconfig11
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/fb-puv3.c846
-rw-r--r--include/asm-generic/ftrace.h16
-rw-r--r--include/asm-generic/io.h33
-rw-r--r--include/asm-generic/sizes.h47
-rw-r--r--include/asm-generic/uaccess.h8
-rw-r--r--include/linux/fb.h2
163 files changed, 19408 insertions, 17 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index caec208de1a..c07b1d7bb02 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4907,6 +4907,15 @@ S: Maintained
F: drivers/block/pktcdvd.c
F: include/linux/pktcdvd.h
+PKUNITY SOC DRIVERS
+M: Guan Xuetao <gxt@mprc.pku.edu.cn>
+W: http://mprc.pku.edu.cn/~guanxuetao/linux
+S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32.git
+F: drivers/input/serio/i8042-unicore32io.h
+F: drivers/i2c/busses/i2c-puv3.c
+F: drivers/video/fb-puv3.c
+
PMC SIERRA MaxRAID DRIVER
M: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
L: linux-scsi@vger.kernel.org
@@ -6270,6 +6279,13 @@ F: drivers/uwb/
F: include/linux/uwb.h
F: include/linux/uwb/
+UNICORE32 ARCHITECTURE:
+M: Guan Xuetao <gxt@mprc.pku.edu.cn>
+W: http://mprc.pku.edu.cn/~guanxuetao/linux
+S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32.git
+F: arch/unicore32/
+
UNIFDEF
M: Tony Finch <dot@dotat.at>
W: http://dotat.at/prog/unifdef
diff --git a/arch/unicore32/.gitignore b/arch/unicore32/.gitignore
new file mode 100644
index 00000000000..947e99c2a95
--- /dev/null
+++ b/arch/unicore32/.gitignore
@@ -0,0 +1,21 @@
+#
+# Generated include files
+#
+include/generated
+#
+# Generated ld script file
+#
+kernel/vmlinux.lds
+#
+# Generated images in boot
+#
+boot/Image
+boot/zImage
+boot/uImage
+#
+# Generated files in boot/compressed
+#
+boot/compressed/piggy.S
+boot/compressed/piggy.gzip
+boot/compressed/vmlinux
+boot/compressed/vmlinux.lds
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
new file mode 100644
index 00000000000..4a36db45fb3
--- /dev/null
+++ b/arch/unicore32/Kconfig
@@ -0,0 +1,275 @@
+config UNICORE32
+ def_bool y
+ select HAVE_MEMBLOCK
+ select HAVE_GENERIC_DMA_COHERENT
+ select HAVE_GENERIC_HARDIRQS
+ select HAVE_DMA_ATTRS
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_BZIP2
+ select HAVE_KERNEL_LZO
+ select HAVE_KERNEL_LZMA
+ select GENERIC_FIND_FIRST_BIT
+ select GENERIC_IRQ_PROBE
+ select GENERIC_HARDIRQS_NO_DEPRECATED
+ select ARCH_WANT_FRAME_POINTERS
+ help
+ UniCore-32 is 32-bit Instruction Set Architecture,
+ including a series of low-power-consumption RISC chip
+ designs licensed by PKUnity Ltd.
+ Please see web page at <http://www.pkunity.com/>.
+
+config HAVE_PWM
+ bool
+
+config GENERIC_GPIO
+ def_bool y
+
+config GENERIC_CLOCKEVENTS
+ bool
+
+config GENERIC_CSUM
+ def_bool y
+
+config GENERIC_IOMAP
+ def_bool y
+
+config NO_IOPORT
+ bool
+
+config STACKTRACE_SUPPORT
+ def_bool y
+
+config HAVE_LATENCYTOP_SUPPORT
+ def_bool y
+
+config LOCKDEP_SUPPORT
+ def_bool y
+
+config RWSEM_GENERIC_SPINLOCK
+ def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config ARCH_HAS_ILOG2_U32
+ bool
+
+config ARCH_HAS_ILOG2_U64
+ bool
+
+config ARCH_HAS_CPUFREQ
+ bool
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config ARCH_MAY_HAVE_PC_FDC
+ bool
+
+config NEED_DMA_MAP_STATE
+ def_bool y
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+menu "System Type"
+
+config MMU
+ def_bool y
+
+config ARCH_FPGA
+ bool
+
+config ARCH_PUV3
+ def_bool y
+ select CPU_UCV2
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_CPUFREQ
+
+# CONFIGs for ARCH_PUV3
+
+if ARCH_PUV3
+
+choice
+ prompt "Board Selection"
+ default PUV3_DB0913
+
+config PUV3_FPGA_DLX200
+ select ARCH_FPGA
+ bool "FPGA board"
+
+config PUV3_DB0913
+ bool "DEBUG board (0913)"
+
+config PUV3_NB0916
+ bool "NetBook board (0916)"
+ select HAVE_PWM
+
+config PUV3_SMW0919
+ bool "Security Mini-Workstation board (0919)"
+
+endchoice
+
+config PUV3_PM
+ def_bool y if !ARCH_FPGA
+
+endif
+
+source "arch/unicore32/mm/Kconfig"
+
+comment "Floating poing support"
+
+config UNICORE_FPU_F64
+ def_bool y if !ARCH_FPGA
+
+endmenu
+
+menu "Bus support"
+
+config PCI
+ bool "PCI Support"
+ help
+ Find out whether you have a PCI motherboard. PCI is the name of a
+ bus system, i.e. the way the CPU talks to the other stuff inside
+ your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+ VESA. If you have PCI, say Y, otherwise N.
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+endmenu
+
+menu "Kernel Features"
+
+source "kernel/time/Kconfig"
+
+source "kernel/Kconfig.preempt"
+
+source "kernel/Kconfig.hz"
+
+source "mm/Kconfig"
+
+config LEDS
+ def_bool y
+ depends on GENERIC_GPIO
+
+config ALIGNMENT_TRAP
+ def_bool y
+ help
+ Unicore processors can not fetch/store information which is not
+ naturally aligned on the bus, i.e., a 4 byte fetch must start at an
+ address divisible by 4. On 32-bit Unicore processors, these non-aligned
+ fetch/store instructions will be emulated in software if you say
+ here, which has a severe performance impact. This is necessary for
+ correct operation of some network protocols. With an IP-only
+ configuration it is safe to say N, otherwise say Y.
+
+endmenu
+
+menu "Boot options"
+
+config CMDLINE
+ string "Default kernel command string"
+ default ""
+
+config CMDLINE_FORCE
+ bool "Always use the default kernel command string"
+ depends on CMDLINE != ""
+ help
+ Always use the default kernel command string, even if the boot
+ loader passes other arguments to the kernel.
+ This is useful if you cannot or don't want to change the
+ command-line options your boot loader passes to the kernel.
+
+ If unsure, say N.
+
+endmenu
+
+menu "Userspace binary formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+menu "Power management options"
+
+source "kernel/power/Kconfig"
+
+if ARCH_HAS_CPUFREQ
+source "drivers/cpufreq/Kconfig"
+endif
+
+config ARCH_SUSPEND_POSSIBLE
+ def_bool y if !ARCH_FPGA
+
+config ARCH_HIBERNATION_POSSIBLE
+ def_bool y if !ARCH_FPGA
+
+endmenu
+
+source "net/Kconfig"
+
+if ARCH_PUV3
+
+config PUV3_GPIO
+ bool
+ depends on !ARCH_FPGA
+ select GENERIC_GPIO
+ select GPIO_SYSFS if EXPERIMENTAL
+ default y
+
+config PUV3_PWM
+ tristate
+ default BACKLIGHT_PWM
+ help
+ Enable support for NB0916 PWM controllers
+
+config PUV3_RTC
+ tristate "PKUnity v3 RTC Support"
+ depends on !ARCH_FPGA
+
+if PUV3_NB0916
+
+menu "PKUnity NetBook-0916 Features"
+
+config I2C_BATTERY_BQ27200
+ tristate "I2C Battery BQ27200 Support"
+ select PUV3_I2C
+ select POWER_SUPPLY
+ select BATTERY_BQ27x00
+
+config I2C_EEPROM_AT24
+ tristate "I2C EEPROMs AT24 support"
+ select PUV3_I2C
+ select MISC_DEVICES
+ select EEPROM_AT24
+
+config LCD_BACKLIGHT
+ tristate "LCD Backlight support"
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_PWM
+
+endmenu
+
+endif
+
+endif
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/unicore32/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/unicore32/Kconfig.debug b/arch/unicore32/Kconfig.debug
new file mode 100644
index 00000000000..3140151ede4
--- /dev/null
+++ b/arch/unicore32/Kconfig.debug
@@ -0,0 +1,68 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config STRICT_DEVMEM
+ bool "Filter access to /dev/mem"
+ depends on MMU
+ ---help---
+ If this option is disabled, you allow userspace (root) access to all
+ of memory, including kernel and userspace memory. Accidental
+ access to this is obviously disastrous, but specific access can
+ be used by people debugging the kernel.
+
+ If this option is switched on, the /dev/mem file only allows
+ userspace access to memory mapped peripherals.
+
+ If in doubt, say Y.
+
+config EARLY_PRINTK
+ def_bool DEBUG_OCD
+ help
+ Write kernel log output directly into the ocd or to a serial port.
+
+ This is useful for kernel debugging when your machine crashes very
+ early before the console code is initialized. For normal operation
+ it is not recommended because it looks ugly and doesn't cooperate
+ with klogd/syslogd or the X server. You should normally N here,
+ unless you want to debug such a crash.
+
+config DEBUG_STACK_USAGE
+ bool "Enable stack utilization instrumentation"
+ depends on DEBUG_KERNEL
+ help
+ Enables the display of the minimum amount of free stack which each
+ task has ever had available in the sysrq-T output.
+
+# These options are only for real kernel hackers who want to get their hands dirty.
+config DEBUG_LL
+ bool "Kernel low-level debugging functions"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to include definitions of printascii, printch, printhex
+ in the kernel. This is helpful if you are debugging code that
+ executes before the console is initialized.
+
+config DEBUG_OCD
+ bool "Kernel low-level debugging via On-Chip-Debugger"
+ depends on DEBUG_LL
+ default y
+ help
+ Say Y here if you want the debug print routines to direct their
+ output to the UniCore On-Chip-Debugger channel using CP #1.
+
+config DEBUG_OCD_BREAKPOINT
+ bool "Breakpoint support via On-Chip-Debugger"
+ depends on DEBUG_OCD
+
+config DEBUG_UART
+ int "Kernel low-level debugging messages via serial port"
+ depends on DEBUG_LL
+ range 0 1
+ default "0"
+ help
+ Choice for UART for kernel low-level using PKUnity UARTS,
+ should be between zero and one. The port must have been
+ initialised by the boot-loader before use.
+
+endmenu
diff --git a/arch/unicore32/Makefile b/arch/unicore32/Makefile
new file mode 100644
index 00000000000..e08d6d370a8
--- /dev/null
+++ b/arch/unicore32/Makefile
@@ -0,0 +1,95 @@
+#
+# arch/unicore32/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2002~2010 by Guan Xue-tao
+#
+ifneq ($(SUBARCH),$(ARCH))
+ ifeq ($(CROSS_COMPILE),)
+ CROSS_COMPILE := $(call cc-cross-prefix, unicore32-linux-)
+ endif
+endif
+
+LDFLAGS_vmlinux := -p --no-undefined -X
+
+OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment -S
+
+# Never generate .eh_frame
+KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
+
+# Never use hard float in kernel
+KBUILD_CFLAGS += -msoft-float
+
+ifeq ($(CONFIG_FRAME_POINTER),y)
+KBUILD_CFLAGS += -mno-sched-prolog
+endif
+
+CHECKFLAGS += -D__unicore32__
+
+head-y := arch/unicore32/kernel/head.o
+head-y += arch/unicore32/kernel/init_task.o
+
+core-y += arch/unicore32/kernel/
+core-y += arch/unicore32/mm/
+
+libs-y += arch/unicore32/lib/
+
+ASM_GENERATED_DIR := $(srctree)/arch/unicore32/include/generated
+LINUXINCLUDE += -I$(ASM_GENERATED_DIR)
+
+ASM_GENERIC_HEADERS := atomic.h auxvec.h
+ASM_GENERIC_HEADERS += bitsperlong.h bug.h bugs.h
+ASM_GENERIC_HEADERS += cputime.h current.h
+ASM_GENERIC_HEADERS += device.h div64.h
+ASM_GENERIC_HEADERS += emergency-restart.h errno.h
+ASM_GENERIC_HEADERS += fb.h fcntl.h ftrace.h
+ASM_GENERIC_HEADERS += hardirq.h hw_irq.h
+ASM_GENERIC_HEADERS += ioctl.h ioctls.h ipcbuf.h irq_regs.h
+ASM_GENERIC_HEADERS += kdebug.h kmap_types.h
+ASM_GENERIC_HEADERS += local.h
+ASM_GENERIC_HEADERS += mman.h module.h msgbuf.h
+ASM_GENERIC_HEADERS += param.h parport.h percpu.h poll.h posix_types.h
+ASM_GENERIC_HEADERS += resource.h
+ASM_GENERIC_HEADERS += scatterlist.h sections.h segment.h sembuf.h serial.h
+ASM_GENERIC_HEADERS += setup.h shmbuf.h shmparam.h
+ASM_GENERIC_HEADERS += siginfo.h signal.h sizes.h
+ASM_GENERIC_HEADERS += socket.h sockios.h stat.h statfs.h swab.h syscalls.h
+ASM_GENERIC_HEADERS += termbits.h termios.h topology.h types.h
+ASM_GENERIC_HEADERS += ucontext.h unaligned.h user.h
+ASM_GENERIC_HEADERS += vga.h
+ASM_GENERIC_HEADERS += xor.h
+
+archprepare:
+ifneq ($(ASM_GENERATED_DIR), $(wildcard $(ASM_GENERATED_DIR)))
+ $(Q)mkdir -p $(ASM_GENERATED_DIR)/asm
+ $(Q)$(foreach a, $(ASM_GENERIC_HEADERS), \
+ echo '#include <asm-generic/$a>' \
+ > $(ASM_GENERATED_DIR)/asm/$a; )
+endif
+
+boot := arch/unicore32/boot
+
+# Default target when executing plain make
+KBUILD_IMAGE := zImage
+
+all: $(KBUILD_IMAGE)
+
+zImage Image uImage: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+MRPROPER_DIRS += $(ASM_GENERATED_DIR)
+
+archclean:
+ $(Q)$(MAKE) $(clean)=$(boot)
+
+define archhelp
+ echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
+ echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
+ echo ' uImage - U-Boot wrapped zImage'
+endef
diff --git a/arch/unicore32/boot/Makefile b/arch/unicore32/boot/Makefile
new file mode 100644
index 00000000000..79e5f88845d
--- /dev/null
+++ b/arch/unicore32/boot/Makefile
@@ -0,0 +1,47 @@
+#
+# arch/unicore32/boot/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2001~2010 GUAN Xue-tao
+#
+
+MKIMAGE := $(srctree)/scripts/mkuboot.sh
+
+targets := Image zImage uImage
+
+$(obj)/Image: vmlinux FORCE
+ $(call if_changed,objcopy)
+ @echo ' Kernel: $@ is ready'
+
+$(obj)/compressed/vmlinux: $(obj)/Image FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/compressed $@
+
+$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,objcopy)
+ @echo ' Kernel: $@ is ready'
+
+quiet_cmd_uimage = UIMAGE $@
+ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A unicore -O linux -T kernel \
+ -C none -a $(LOADADDR) -e $(STARTADDR) \
+ -n 'Linux-$(KERNELRELEASE)' -d $< $@
+
+$(obj)/uImage: LOADADDR=0x0
+
+$(obj)/uImage: STARTADDR=$(LOADADDR)
+
+$(obj)/uImage: $(obj)/zImage FORCE
+ $(call if_changed,uimage)
+ @echo ' Image $@ is ready'
+
+PHONY += initrd FORCE
+initrd:
+ @test "$(INITRD)" != "" || \
+ (echo You must specify INITRD; exit -1)
+
+subdir- := compressed
diff --git a/arch/unicore32/boot/compressed/Makefile b/arch/unicore32/boot/compressed/Makefile
new file mode 100644
index 00000000000..95373428cb3
--- /dev/null
+++ b/arch/unicore32/boot/compressed/Makefile
@@ -0,0 +1,68 @@
+#
+# linux/arch/unicore32/boot/compressed/Makefile
+#
+# create a compressed vmlinuz image from the original vmlinux
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2001~2010 GUAN Xue-tao
+#
+
+EXTRA_CFLAGS := -fpic -fno-builtin
+EXTRA_AFLAGS := -Wa,-march=all
+
+OBJS := misc.o
+
+# font.c and font.o
+CFLAGS_font.o := -Dstatic=
+$(obj)/font.c: $(srctree)/drivers/video/console/font_8x8.c
+ $(call cmd,shipped)
+
+# piggy.S and piggy.o
+suffix_$(CONFIG_KERNEL_GZIP) := gzip
+suffix_$(CONFIG_KERNEL_BZIP2) := bz2
+suffix_$(CONFIG_KERNEL_LZO) := lzo
+suffix_$(CONFIG_KERNEL_LZMA) := lzma
+
+$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
+ $(call if_changed,$(suffix_y))
+
+SEDFLAGS_piggy = s/DECOMP_SUFFIX/$(suffix_y)/
+$(obj)/piggy.S: $(obj)/piggy.S.in
+ @sed "$(SEDFLAGS_piggy)" < $< > $@
+
+$(obj)/piggy.o: $(obj)/piggy.$(suffix_y) $(obj)/piggy.S FORCE
+
+targets := vmlinux vmlinux.lds font.o font.c head.o misc.o \
+ piggy.$(suffix_y) piggy.o piggy.S \
+
+# Make sure files are removed during clean
+extra-y += piggy.gzip piggy.bz2 piggy.lzo piggy.lzma
+
+# ?
+LDFLAGS_vmlinux += -p
+# Report unresolved symbol references
+LDFLAGS_vmlinux += --no-undefined
+# Delete all temporary local symbols
+LDFLAGS_vmlinux += -X
+# Next argument is a linker script
+LDFLAGS_vmlinux += -T
+
+# For uidivmod
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head.o $(obj)/piggy.o \
+ $(obj)/misc.o FORCE
+ $(call if_changed,ld)
+ @:
+
+# We now have a PIC decompressor implementation. Decompressors running
+# from RAM should not define ZTEXTADDR. Decompressors running directly
+# from ROM or Flash must define ZTEXTADDR (preferably via the config)
+ZTEXTADDR := 0
+ZBSSADDR := ALIGN(4)
+
+SEDFLAGS_lds = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
+$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/unicore32/boot/Makefile $(KCONFIG_CONFIG)
+ @sed "$(SEDFLAGS_lds)" < $< > $@
+
diff --git a/arch/unicore32/boot/compressed/head.S b/arch/unicore32/boot/compressed/head.S
new file mode 100644
index 00000000000..fbd1e374c68
--- /dev/null
+++ b/arch/unicore32/boot/compressed/head.S
@@ -0,0 +1,204 @@
+/*
+ * linux/arch/unicore32/boot/compressed/head.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <mach/memory.h>
+
+#define csub cmpsub
+#define cand cmpand
+#define nop8 nop; nop; nop; nop; nop; nop; nop; nop
+
+ .section ".start", #alloc, #execinstr
+ .text
+start:
+ .type start,#function
+
+ /* Initialize ASR, PRIV mode and INTR off */
+ mov r0, #0xD3
+ mov.a asr, r0
+
+ adr r0, LC0
+ ldm (r1, r2, r3, r5, r6, r7, r8), [r0]+
+ ldw sp, [r0+], #28
+ sub.a r0, r0, r1 @ calculate the delta offset
+
+ /*
+ * if delta is zero, we are running at the address
+ * we were linked at.
+ */
+ beq not_relocated
+
+ /*
+ * We're running at a different address. We need to fix
+ * up various pointers:
+ * r5 - zImage base address (_start)
+ * r7 - GOT start
+ * r8 - GOT end
+ */
+ add r5, r5, r0
+ add r7, r7, r0
+ add r8, r8, r0
+
+ /*
+ * we need to fix up pointers into the BSS region.
+ * r2 - BSS start
+ * r3 - BSS end
+ * sp - stack pointer
+ */
+ add r2, r2, r0
+ add r3, r3, r0
+ add sp, sp, r0
+
+ /*
+ * Relocate all entries in the GOT table.
+ * This fixes up the C references.
+ * r7 - GOT start
+ * r8 - GOT end
+ */
+1001: ldw r1, [r7+], #0
+ add r1, r1, r0
+ stw.w r1, [r7]+, #4
+ csub.a r7, r8
+ bub 1001b
+
+not_relocated:
+ /*
+ * Clear BSS region.
+ * r2 - BSS start
+ * r3 - BSS end
+ */
+ mov r0, #0
+1002: stw.w r0, [r2]+, #4
+ csub.a r2, r3
+ bub 1002b
+
+ /*
+ * Turn on the cache.
+ */
+ mov r0, #0
+ movc p0.c5, r0, #28 @ cache invalidate all
+ nop8
+ movc p0.c6, r0, #6 @ tlb invalidate all
+ nop8
+
+ mov r0, #0x1c @ en icache and wb dcache
+ movc p0.c1, r0, #0
+ nop8
+
+ /*
+ * Set up some pointers, for starting decompressing.
+ */
+
+ mov r1, sp @ malloc space above stack
+ add r2, sp, #0x10000 @ 64k max
+
+ /*
+ * Check to see if we will overwrite ourselves.
+ * r4 = final kernel address
+ * r5 = start of this image
+ * r6 = size of decompressed image
+ * r2 = end of malloc space (and therefore this image)
+ * We basically want:
+ * r4 >= r2 -> OK
+ * r4 + image length <= r5 -> OK
+ */
+ ldw r4, =KERNEL_IMAGE_START
+ csub.a r4, r2
+ bea wont_overwrite
+ add r0, r4, r6
+ csub.a r0, r5
+ beb wont_overwrite
+
+ /*
+ * If overwrite, just print error message
+ */
+ b __error_overwrite
+
+ /*
+ * We're not in danger of overwriting ourselves.
+ * Do this the simple way.
+ */
+wont_overwrite:
+ /*
+ * decompress_kernel:
+ * r0: output_start
+ * r1: free_mem_ptr_p
+ * r2: free_mem_ptr_end_p
+ */
+ mov r0, r4
+ b.l decompress_kernel @ C functions
+
+ /*
+ * Clean and flush the cache to maintain consistency.
+ */
+ mov r0, #0
+ movc p0.c5, r0, #14 @ flush dcache
+ nop8
+ movc p0.c5, r0, #20 @ icache invalidate all
+ nop8
+
+ /*
+ * Turn off the Cache and MMU.
+ */
+ mov r0, #0 @ disable i/d cache and MMU
+ movc p0.c1, r0, #0
+ nop8
+
+ mov r0, #0 @ must be zero
+ ldw r4, =KERNEL_IMAGE_START
+ mov pc, r4 @ call kernel
+
+
+ .align 2
+ .type LC0, #object
+LC0: .word LC0 @ r1
+ .word __bss_start @ r2
+ .word _end @ r3
+ .word _start @ r5
+ .word _image_size @ r6
+ .word _got_start @ r7
+ .word _got_end @ r8
+ .word decompress_stack_end @ sp
+ .size LC0, . - LC0
+
+print_string:
+#ifdef CONFIG_DEBUG_OCD
+2001: ldb.w r1, [r0]+, #1
+ csub.a r1, #0
+ bne 2002f
+ mov pc, lr
+2002:
+ movc r2, p1.c0, #0
+ cand.a r2, #2
+ bne 2002b
+ movc p1.c1, r1, #1
+ csub.a r1, #'\n'
+ cmoveq r1, #'\r'
+ beq 2002b
+ b 2001b
+#else
+ mov pc, lr
+#endif
+
+__error_overwrite:
+ adr r0, str_error
+ b.l print_string
+2001: nop8
+ b 2001b
+str_error: .asciz "\nError: Kernel address OVERWRITE\n"
+ .align
+
+ .ltorg
+
+ .align 4
+ .section ".stack", "aw", %nobits
+decompress_stack: .space 4096
+decompress_stack_end:
diff --git a/arch/unicore32/boot/compressed/misc.c b/arch/unicore32/boot/compressed/misc.c
new file mode 100644
index 00000000000..176d5bda355
--- /dev/null
+++ b/arch/unicore32/boot/compressed/misc.c
@@ -0,0 +1,126 @@
+/*
+ * linux/arch/unicore32/boot/compressed/misc.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/unaligned.h>
+#include <mach/uncompress.h>
+
+/*
+ * gzip delarations
+ */
+unsigned char *output_data;
+unsigned long output_ptr;
+
+unsigned int free_mem_ptr;
+unsigned int free_mem_end_ptr;
+
+#define STATIC static
+#define STATIC_RW_DATA /* non-static please */
+
+/*
+ * arch-dependent implementations
+ */
+#ifndef ARCH_HAVE_DECOMP_ERROR
+#define arch_decomp_error(x)
+#endif
+
+#ifndef ARCH_HAVE_DECOMP_SETUP
+#define arch_decomp_setup()
+#endif
+
+#ifndef ARCH_HAVE_DECOMP_PUTS
+#define arch_decomp_puts(p)
+#endif
+
+void *memcpy(void *dest, const void *src, size_t n)
+{
+ int i = 0;
+ unsigned char *d = (unsigned char *)dest, *s = (unsigned char *)src;
+
+ for (i = n >> 3; i > 0; i--) {
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (n & 1 << 2) {
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (n & 1 << 1) {
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (n & 1)
+ *d++ = *s++;
+
+ return dest;
+}
+
+void error(char *x)
+{
+ arch_decomp_puts("\n\n");
+ arch_decomp_puts(x);
+ arch_decomp_puts("\n\n -- System halted");
+
+ arch_decomp_error(x);
+
+ for (;;)
+ ; /* Halt */
+}
+
+/* Heap size should be adjusted for different decompress method */
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_BZIP2
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
+unsigned long decompress_kernel(unsigned long output_start,
+ unsigned long free_mem_ptr_p,
+ unsigned long free_mem_ptr_end_p)
+{
+ unsigned char *tmp;
+
+ output_data = (unsigned char *)output_start;
+ free_mem_ptr = free_mem_ptr_p;
+ free_mem_end_ptr = free_mem_ptr_end_p;
+
+ arch_decomp_setup();
+
+ tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
+ output_ptr = get_unaligned_le32(tmp);
+
+ arch_decomp_puts("Uncompressing Linux...");
+ decompress(input_data, input_data_end - input_data, NULL, NULL,
+ output_data, NULL, error);
+ arch_decomp_puts(" done, booting the kernel.\n");
+ return output_ptr;
+}
diff --git a/arch/unicore32/boot/compressed/piggy.S.in b/arch/unicore32/boot/compressed/piggy.S.in
new file mode 100644
index 00000000000..b79704d5802
--- /dev/null
+++ b/arch/unicore32/boot/compressed/piggy.S.in
@@ -0,0 +1,6 @@
+ .section .piggydata,#alloc
+ .globl input_data
+input_data:
+ .incbin "arch/unicore32/boot/compressed/piggy.DECOMP_SUFFIX"
+ .globl input_data_end
+input_data_end:
diff --git a/arch/unicore32/boot/compressed/vmlinux.lds.in b/arch/unicore32/boot/compressed/vmlinux.lds.in
new file mode 100644
index 00000000000..d5a3ce29623
--- /dev/null
+++ b/arch/unicore32/boot/compressed/vmlinux.lds.in
@@ -0,0 +1,61 @@
+/*
+ * linux/arch/unicore/boot/compressed/vmlinux.lds.in
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+OUTPUT_ARCH(unicore32)
+ENTRY(_start)
+SECTIONS
+{
+ /DISCARD/ : {
+ /*
+ * Discard any r/w data - this produces a link error if we have any,
+ * which is required for PIC decompression. Local data generates
+ * GOTOFF relocations, which prevents it being relocated independently
+ * of the text/got segments.
+ */
+ *(.data)
+ }
+
+ . = TEXT_START;
+ _text = .;
+
+ .text : {
+ _start = .;
+ *(.start)
+ *(.text)
+ *(.text.*)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata)
+ *(.rodata.*)
+ *(.piggydata)
+ . = ALIGN(4);
+ }
+
+ _etext = .;
+
+ /* Assume size of decompressed image is 4x the compressed image */
+ _image_size = (_etext - _text) * 4;
+
+ _got_start = .;
+ .got : { *(.got) }
+ _got_end = .;
+ .got.plt : { *(.got.plt) }
+ _edata = .;
+
+ . = BSS_START;
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+
+ .stack : { *(.stack) }
+ .comment 0 : { *(.comment) }
+}
+
diff --git a/arch/unicore32/configs/debug_defconfig b/arch/unicore32/configs/debug_defconfig
new file mode 100644
index 00000000000..b5fbde9f1cb
--- /dev/null
+++ b/arch/unicore32/configs/debug_defconfig
@@ -0,0 +1,215 @@
+### General setup
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCALVERSION="-debug"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_HOTPLUG=y
+# Initial RAM filesystem and RAM disk (initramfs/initrd) support
+#CONFIG_BLK_DEV_INITRD=y
+#CONFIG_INITRAMFS_SOURCE="arch/unicore/ramfs/ramfs_config"
+
+### Enable loadable module support
+CONFIG_MODULES=n
+CONFIG_MODULE_UNLOAD=y
+
+### System Type
+CONFIG_ARCH_PUV3=y
+# Board Selection
+CONFIG_PUV3_NB0916=y
+# Processor Features
+CONFIG_CPU_DCACHE_LINE_DISABLE=y
+CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE=n
+
+### Bus support
+CONFIG_PCI=y
+CONFIG_PCI_LEGACY=n
+
+### Boot options
+# for debug, adding: earlyprintk=ocd,keep initcall_debug
+# others support: test_suspend=mem root=/dev/sda
+# hibernate support: resume=/dev/sda3
+CONFIG_CMDLINE="earlyprintk=ocd,keep ignore_loglevel"
+# TODO: mem=512M video=unifb:1024x600-16@75
+# for nfs: root=/dev/nfs rw nfsroot=192.168.10.88:/home/udb/nfs/,rsize=1024,wsize=1024
+# ip=192.168.10.83:192.168.10.88:192.168.10.1:255.255.255.0::eth0:off
+CONFIG_CMDLINE_FORCE=y
+
+### Power management options
+CONFIG_PM=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="/dev/sda3"
+CONFIG_CPU_FREQ=n
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+
+### Networking support
+CONFIG_NET=y
+# Networking options
+CONFIG_PACKET=m
+CONFIG_UNIX=m
+# TCP/IP networking
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IPV6=n
+# Wireless
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+### PKUnity SoC Features
+CONFIG_USB_WLAN_HED_AQ3=n
+CONFIG_USB_CMMB_INNOFIDEI=n
+CONFIG_I2C_BATTERY_BQ27200=n
+CONFIG_I2C_EEPROM_AT24=n
+CONFIG_LCD_BACKLIGHT=n
+
+CONFIG_PUV3_RTC=y
+CONFIG_PUV3_UMAL=y
+CONFIG_PUV3_MUSB=n
+CONFIG_PUV3_AC97=n
+CONFIG_PUV3_NAND=n
+CONFIG_PUV3_MMC=n
+CONFIG_PUV3_UART=n
+
+### Device Drivers
+# Memory Technology Device (MTD) support
+CONFIG_MTD=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+# RAM/ROM/Flash chip drivers
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_CFI_AMDSTD=m
+# Mapping drivers for chip access
+CONFIG_MTD_PHYSMAP=m
+
+# Block devices
+CONFIG_BLK_DEV_LOOP=m
+
+# SCSI device support
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+CONFIG_ATA=y
+CONFIG_SATA_VIA=y
+
+# Network device support
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NETDEV_1000=y
+# Wireless LAN
+CONFIG_WLAN_80211=n
+CONFIG_RT2X00=n
+CONFIG_RT73USB=n
+
+# Input device support
+CONFIG_INPUT_EVDEV=m
+# Keyboards
+CONFIG_KEYBOARD_GPIO=m
+
+# I2C support
+CONFIG_I2C=y
+CONFIG_I2C_PUV3=y
+
+# Hardware Monitoring support
+#CONFIG_SENSORS_LM75=m
+# Generic Thermal sysfs driver
+#CONFIG_THERMAL=m
+#CONFIG_THERMAL_HWMON=y
+
+# Multimedia support
+CONFIG_MEDIA_SUPPORT=n
+CONFIG_VIDEO_DEV=n
+CONFIG_USB_VIDEO_CLASS=n
+
+# Graphics support
+CONFIG_FB=y
+CONFIG_FB_PUV3_UNIGFX=y
+# Console display driver support
+CONFIG_VGA_CONSOLE=n
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# Bootup logo
+CONFIG_LOGO=n
+
+# Sound card support
+CONFIG_SOUND=m
+# Advanced Linux Sound Architecture
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+
+# USB support
+CONFIG_USB_ARCH_HAS_HCD=n
+CONFIG_USB=n
+CONFIG_USB_DEVICEFS=n
+CONFIG_USB_PRINTER=n
+CONFIG_USB_STORAGE=n
+# Inventra Highspeed Dual Role Controller
+CONFIG_USB_MUSB_HDRC=n
+
+# LED Support
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+# LED Triggers
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+# Real Time Clock
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+### File systems
+CONFIG_EXT2_FS=m
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_FUSE_FS=m
+# CD-ROM/DVD Filesystems
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+# DOS/FAT/NT Filesystems
+CONFIG_VFAT_FS=m
+# Pseudo filesystems
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# Miscellaneous filesystems
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_JFFS2_FS=m
+CONFIG_UBIFS_FS=m
+# Network File Systems
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# Partition Types
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MSDOS_PARTITION=y
+# Native language support
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+
+### Kernel hacking
+CONFIG_FRAME_WARN=8096
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_PROVE_LOCKING=n
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_LL=y
+
diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild
new file mode 100644
index 00000000000..b200fdaca44
--- /dev/null
+++ b/arch/unicore32/include/asm/Kbuild
@@ -0,0 +1,2 @@
+include include/asm-generic/Kbuild.asm
+
diff --git a/arch/unicore32/include/asm/assembler.h b/arch/unicore32/include/asm/assembler.h
new file mode 100644
index 00000000000..8e87ed7faeb
--- /dev/null
+++ b/arch/unicore32/include/asm/assembler.h
@@ -0,0 +1,131 @@
+/*
+ * linux/arch/unicore32/include/asm/assembler.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not include any C declarations in this file - it is included by
+ * assembler source.
+ */
+#ifndef __ASSEMBLY__
+#error "Only include this from assembly code"
+#endif
+
+#include <asm/ptrace.h>
+
+/*
+ * Little Endian independent macros for shifting bytes within registers.
+ */
+#define pull >>
+#define push <<
+#define get_byte_0 << #0
+#define get_byte_1 >> #8
+#define get_byte_2 >> #16
+#define get_byte_3 >> #24
+#define put_byte_0 << #0
+#define put_byte_1 << #8
+#define put_byte_2 << #16
+#define put_byte_3 << #24
+
+#define cadd cmpadd
+#define cand cmpand
+#define csub cmpsub
+#define cxor cmpxor
+
+/*
+ * Enable and disable interrupts
+ */
+ .macro disable_irq, temp
+ mov \temp, asr
+ andn \temp, \temp, #0xFF
+ or \temp, \temp, #PSR_I_BIT | PRIV_MODE
+ mov.a asr, \temp
+ .endm
+
+ .macro enable_irq, temp
+ mov \temp, asr
+ andn \temp, \temp, #0xFF
+ or \temp, \temp, #PRIV_MODE
+ mov.a asr, \temp
+ .endm
+
+#define USER(x...) \
+9999: x; \
+ .pushsection __ex_table, "a"; \
+ .align 3; \
+ .long 9999b, 9001f; \
+ .popsection
+
+ .macro notcond, cond, nexti = .+8
+ .ifc \cond, eq
+ bne \nexti
+ .else; .ifc \cond, ne
+ beq \nexti
+ .else; .ifc \cond, ea
+ bub \nexti
+ .else; .ifc \cond, ub
+ bea \nexti
+ .else; .ifc \cond, fs
+ bns \nexti
+ .else; .ifc \cond, ns
+ bfs \nexti
+ .else; .ifc \cond, fv
+ bnv \nexti
+ .else; .ifc \cond, nv
+ bfv \nexti
+ .else; .ifc \cond, ua
+ beb \nexti
+ .else; .ifc \cond, eb
+ bua \nexti
+ .else; .ifc \cond, eg
+ bsl \nexti
+ .else; .ifc \cond, sl
+ beg \nexti
+ .else; .ifc \cond, sg
+ bel \nexti
+ .else; .ifc \cond, el
+ bsg \nexti
+ .else; .ifnc \cond, al
+ .error "Unknown cond in notcond macro argument"
+ .endif; .endif; .endif; .endif; .endif; .endif; .endif
+ .endif; .endif; .endif; .endif; .endif; .endif; .endif
+ .endif
+ .endm
+
+ .macro usracc, instr, reg, ptr, inc, cond, rept, abort
+ .rept \rept
+ notcond \cond, .+8
+9999 :
+ .if \inc == 1
+ \instr\()b.u \reg, [\ptr], #\inc
+ .elseif \inc == 4
+ \instr\()w.u \reg, [\ptr], #\inc
+ .else
+ .error "Unsupported inc macro argument"
+ .endif
+
+ .pushsection __ex_table, "a"
+ .align 3
+ .long 9999b, \abort
+ .popsection
+ .endr
+ .endm
+
+ .macro strusr, reg, ptr, inc, cond = al, rept = 1, abort = 9001f
+ usracc st, \reg, \ptr, \inc, \cond, \rept, \abort
+ .endm
+
+ .macro ldrusr, reg, ptr, inc, cond = al, rept = 1, abort = 9001f
+ usracc ld, \reg, \ptr, \inc, \cond, \rept, \abort
+ .endm
+
+ .macro nop8
+ .rept 8
+ nop
+ .endr
+ .endm
diff --git a/arch/unicore32/include/asm/bitops.h b/arch/unicore32/include/asm/bitops.h
new file mode 100644
index 00000000000..1628a632899
--- /dev/null
+++ b/arch/unicore32/include/asm/bitops.h
@@ -0,0 +1,47 @@
+/*
+ * linux/arch/unicore32/include/asm/bitops.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_BITOPS_H__
+#define __UNICORE_BITOPS_H__
+
+#define find_next_bit __uc32_find_next_bit
+#define find_next_zero_bit __uc32_find_next_zero_bit
+
+#define find_first_bit __uc32_find_first_bit
+#define find_first_zero_bit __uc32_find_first_zero_bit
+
+#define _ASM_GENERIC_BITOPS_FLS_H_
+#define _ASM_GENERIC_BITOPS___FLS_H_
+#define _ASM_GENERIC_BITOPS_FFS_H_
+#define _ASM_GENERIC_BITOPS___FFS_H_
+/*
+ * On UNICORE, those functions can be implemented around
+ * the cntlz instruction for much better code efficiency.
+ */
+
+static inline int fls(int x)
+{
+ int ret;
+
+ asm("cntlz\t%0, %1" : "=r" (ret) : "r" (x) : "cc");
+ ret = 32 - ret;
+
+ return ret;
+}
+
+#define __fls(x) (fls(x) - 1)
+#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
+#define __ffs(x) (ffs(x) - 1)
+
+#include <asm-generic/bitops.h>
+
+#endif /* __UNICORE_BITOPS_H__ */
diff --git a/arch/unicore32/include/asm/byteorder.h b/arch/unicore32/include/asm/byteorder.h
new file mode 100644
index 00000000000..ebe1b3fef3e
--- /dev/null
+++ b/arch/unicore32/include/asm/byteorder.h
@@ -0,0 +1,24 @@
+/*
+ * linux/arch/unicore32/include/asm/byteorder.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * UniCore ONLY support Little Endian mode, the data bus is connected such
+ * that byte accesses appear as:
+ * 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
+ * and word accesses (data or instruction) appear as:
+ * d0...d31
+ */
+#ifndef __UNICORE_BYTEORDER_H__
+#define __UNICORE_BYTEORDER_H__
+
+#include <linux/byteorder/little_endian.h>
+
+#endif
+
diff --git a/arch/unicore32/include/asm/cache.h b/arch/unicore32/include/asm/cache.h
new file mode 100644
index 00000000000..ad8f795d86c
--- /dev/null
+++ b/arch/unicore32/include/asm/cache.h
@@ -0,0 +1,27 @@
+/*
+ * linux/arch/unicore32/include/asm/cache.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_CACHE_H__
+#define __UNICORE_CACHE_H__
+
+#define L1_CACHE_SHIFT (5)
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
+
+#endif
diff --git a/arch/unicore32/include/asm/cacheflush.h b/arch/unicore32/include/asm/cacheflush.h
new file mode 100644
index 00000000000..c0301e6c8b8
--- /dev/null
+++ b/arch/unicore32/include/asm/cacheflush.h
@@ -0,0 +1,211 @@
+/*
+ * linux/arch/unicore32/include/asm/cacheflush.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_CACHEFLUSH_H__
+#define __UNICORE_CACHEFLUSH_H__
+
+#include <linux/mm.h>
+
+#include <asm/shmparam.h>
+
+#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
+
+/*
+ * This flag is used to indicate that the page pointed to by a pte is clean
+ * and does not require cleaning before returning it to the user.
+ */
+#define PG_dcache_clean PG_arch_1
+
+/*
+ * MM Cache Management
+ * ===================
+ *
+ * The arch/unicore32/mm/cache.S files implement these methods.
+ *
+ * Start addresses are inclusive and end addresses are exclusive;
+ * start addresses should be rounded down, end addresses up.
+ *
+ * See Documentation/cachetlb.txt for more information.
+ * Please note that the implementation of these, and the required
+ * effects are cache-type (VIVT/VIPT/PIPT) specific.
+ *
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ * Currently only needed for cache-v6.S and cache-v7.S, see
+ * __flush_icache_all for the generic implementation.
+ *
+ * flush_kern_all()
+ *
+ * Unconditionally clean and invalidate the entire cache.
+ *
+ * flush_user_all()
+ *
+ * Clean and invalidate all user space cache entries
+ * before a change of page tables.
+ *
+ * flush_user_range(start, end, flags)
+ *
+ * Clean and invalidate a range of cache entries in the
+ * specified address space before a change of page tables.
+ * - start - user start address (inclusive, page aligned)
+ * - end - user end address (exclusive, page aligned)
+ * - flags - vma->vm_flags field
+ *
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * flush_kern_dcache_area(kaddr, size)
+ *
+ * Ensure that the data held in page is written back.
+ * - kaddr - page address
+ * - size - region size
+ *
+ * DMA Cache Coherency
+ * ===================
+ *
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+
+extern void __cpuc_flush_icache_all(void);
+extern void __cpuc_flush_kern_all(void);
+extern void __cpuc_flush_user_all(void);
+extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
+extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
+extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
+extern void __cpuc_flush_dcache_area(void *, size_t);
+extern void __cpuc_flush_kern_dcache_area(void *addr, size_t size);
+
+/*
+ * These are private to the dma-mapping API. Do not use directly.
+ * Their sole purpose is to ensure that data held in the cache
+ * is visible to DMA, or data written by DMA to system memory is
+ * visible to the CPU.
+ */
+extern void __cpuc_dma_clean_range(unsigned long, unsigned long);
+extern void __cpuc_dma_flush_range(unsigned long, unsigned long);
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space. Really, we want to allow our "user
+ * space" model to handle this.
+ */
+extern void copy_to_user_page(struct vm_area_struct *, struct page *,
+ unsigned long, void *, const void *, unsigned long);
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ do { \
+ memcpy(dst, src, len); \
+ } while (0)
+
+/*
+ * Convert calls to our calling convention.
+ */
+/* Invalidate I-cache */
+static inline void __flush_icache_all(void)
+{
+ asm("movc p0.c5, %0, #20;\n"
+ "nop; nop; nop; nop; nop; nop; nop; nop\n"
+ :
+ : "r" (0));
+}
+
+#define flush_cache_all() __cpuc_flush_kern_all()
+
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end);
+extern void flush_cache_page(struct vm_area_struct *vma,
+ unsigned long user_addr, unsigned long pfn);
+
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+
+/*
+ * flush_cache_user_range is used when we want to ensure that the
+ * Harvard caches are synchronised for the user space address range.
+ * This is used for the UniCore private sys_cacheflush system call.
+ */
+#define flush_cache_user_range(vma, start, end) \
+ __cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
+
+/*
+ * Perform necessary cache operations to ensure that data previously
+ * stored within this range of addresses can be executed by the CPU.
+ */
+#define flush_icache_range(s, e) __cpuc_coherent_kern_range(s, e)
+
+/*
+ * Perform necessary cache operations to ensure that the TLB will
+ * see data written in the specified area.
+ */
+#define clean_dcache_area(start, size) cpu_dcache_clean_area(start, size)
+
+/*
+ * flush_dcache_page is used when the kernel has written to the page
+ * cache page at virtual address page->virtual.
+ *
+ * If this page isn't mapped (ie, page_mapping == NULL), or it might
+ * have userspace mappings, then we _must_ always clean + invalidate
+ * the dcache entries associated with the kernel mapping.
+ *
+ * Otherwise we can defer the operation, and clean the cache when we are
+ * about to change to user space. This is the same method as used on SPARC64.
+ * See update_mmu_cache for the user space part.
+ */
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+extern void flush_dcache_page(struct page *);
+
+#define flush_dcache_mmap_lock(mapping) \
+ spin_lock_irq(&(mapping)->tree_lock)
+#define flush_dcache_mmap_unlock(mapping) \
+ spin_unlock_irq(&(mapping)->tree_lock)
+
+#define flush_icache_user_range(vma, page, addr, len) \
+ flush_dcache_page(page)
+
+/*
+ * We don't appear to need to do anything here. In fact, if we did, we'd
+ * duplicate cache flushing elsewhere performed by flush_dcache_page().
+ */
+#define flush_icache_page(vma, page) do { } while (0)
+
+/*
+ * flush_cache_vmap() is used when creating mappings (eg, via vmap,
+ * vmalloc, ioremap etc) in kernel space for pages. On non-VIPT
+ * caches, since the direct-mappings of these pages may contain cached
+ * data, we need to do a full cache flush to ensure that writebacks
+ * don't corrupt data placed into these pages via the new mappings.
+ */
+static inline void flush_cache_vmap(unsigned long start, unsigned long end)
+{
+}
+
+static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
+{
+}
+
+#endif
diff --git a/arch/unicore32/include/asm/checksum.h b/arch/unicore32/include/asm/checksum.h
new file mode 100644
index 00000000000..f55c3f937c3
--- /dev/null
+++ b/arch/unicore32/include/asm/checksum.h
@@ -0,0 +1,41 @@
+/*
+ * linux/arch/unicore32/include/asm/checksum.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * IP checksum routines
+ */
+#ifndef __UNICORE_CHECKSUM_H__
+#define __UNICORE_CHECKSUM_H__
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ __asm__(
+ "add.a %0, %1, %2\n"
+ "addc.a %0, %0, %3\n"
+ "addc.a %0, %0, %4 << #8\n"
+ "addc.a %0, %0, %5\n"
+ "addc %0, %0, #0\n"
+ : "=&r"(sum)
+ : "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto))
+ : "cc");
+ return sum;
+}
+#define csum_tcpudp_nofold csum_tcpudp_nofold
+
+#include <asm-generic/checksum.h>
+
+#endif
diff --git a/arch/unicore32/include/asm/cpu-single.h b/arch/unicore32/include/asm/cpu-single.h
new file mode 100644
index 00000000000..0f55d182343
--- /dev/null
+++ b/arch/unicore32/include/asm/cpu-single.h
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/unicore32/include/asm/cpu-single.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_CPU_SINGLE_H__
+#define __UNICORE_CPU_SINGLE_H__
+
+#include <asm/page.h>
+#include <asm/memory.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#define cpu_switch_mm(pgd, mm) cpu_do_switch_mm(virt_to_phys(pgd), mm)
+
+#define cpu_get_pgd() \
+ ({ \
+ unsigned long pg; \
+ __asm__("movc %0, p0.c2, #0" \
+ : "=r" (pg) : : "cc"); \
+ pg &= ~0x0fff; \
+ (pgd_t *)phys_to_virt(pg); \
+ })
+
+struct mm_struct;
+
+/* declare all the functions as extern */
+extern void cpu_proc_fin(void);
+extern int cpu_do_idle(void);
+extern void cpu_dcache_clean_area(void *, int);
+extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+extern void cpu_set_pte(pte_t *ptep, pte_t pte);
+extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* __UNICORE_CPU_SINGLE_H__ */
diff --git a/arch/unicore32/include/asm/cputype.h b/arch/unicore32/include/asm/cputype.h
new file mode 100644
index 00000000000..ec1a30f9807
--- /dev/null
+++ b/arch/unicore32/include/asm/cputype.h
@@ -0,0 +1,33 @@
+/*
+ * linux/arch/unicore32/include/asm/cputype.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_CPUTYPE_H__
+#define __UNICORE_CPUTYPE_H__
+
+#include <linux/stringify.h>
+
+#define CPUID_CPUID 0
+#define CPUID_CACHETYPE 1
+
+#define read_cpuid(reg) \
+ ({ \
+ unsigned int __val; \
+ asm("movc %0, p0.c0, #" __stringify(reg) \
+ : "=r" (__val) \
+ : \
+ : "cc"); \
+ __val; \
+ })
+
+#define uc32_cpuid read_cpuid(CPUID_CPUID)
+#define uc32_cachetype read_cpuid(CPUID_CACHETYPE)
+
+#endif
diff --git a/arch/unicore32/include/asm/delay.h b/arch/unicore32/include/asm/delay.h
new file mode 100644
index 00000000000..164ae61cd6f
--- /dev/null
+++ b/arch/unicore32/include/asm/delay.h
@@ -0,0 +1,52 @@
+/*
+ * linux/arch/unicore32/include/asm/delay.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Delay routines, using a pre-computed "loops_per_second" value.
+ */
+#ifndef __UNICORE_DELAY_H__
+#define __UNICORE_DELAY_H__
+
+#include <asm/param.h> /* HZ */
+
+extern void __delay(int loops);
+
+/*
+ * This function intentionally does not exist; if you see references to
+ * it, it means that you're calling udelay() with an out of range value.
+ *
+ * With currently imposed limits, this means that we support a max delay
+ * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
+ */
+extern void __bad_udelay(void);
+
+/*
+ * division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec). Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays. This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+extern void __udelay(unsigned long usecs);
+extern void __const_udelay(unsigned long);
+
+#define MAX_UDELAY_MS 2
+
+#define udelay(n) \
+ (__builtin_constant_p(n) ? \
+ ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \
+ __const_udelay((n) * ((2199023U*HZ)>>11))) : \
+ __udelay(n))
+
+#endif /* __UNICORE_DELAY_H__ */
+
diff --git a/arch/unicore32/include/asm/dma-mapping.h b/arch/unicore32/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..9258e592f41
--- /dev/null
+++ b/arch/unicore32/include/asm/dma-mapping.h
@@ -0,0 +1,124 @@
+/*
+ * linux/arch/unicore32/include/asm/dma-mapping.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_DMA_MAPPING_H__
+#define __UNICORE_DMA_MAPPING_H__
+
+#ifdef __KERNEL__
+
+#include <linux/mm_types.h>
+#include <linux/scatterlist.h>
+#include <linux/swiotlb.h>
+
+#include <asm-generic/dma-coherent.h>
+
+#include <asm/memory.h>
+#include <asm/cacheflush.h>
+
+extern struct dma_map_ops swiotlb_dma_map_ops;
+
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+ return &swiotlb_dma_map_ops;
+}
+
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+ struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+ if (unlikely(dma_ops == NULL))
+ return 0;
+
+ return dma_ops->dma_supported(dev, mask);
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+ struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+ if (dma_ops->mapping_error)
+ return dma_ops->mapping_error(dev, dma_addr);
+
+ return 0;
+}
+
+#include <asm-generic/dma-mapping-common.h>
+
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+ if (dev && dev->dma_mask)
+ return addr + size - 1 <= *dev->dma_mask;
+
+ return 1;
+}
+
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+ return paddr;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+ return daddr;
+}
+
+static inline void dma_mark_clean(void *addr, size_t size) {}
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+ if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+ return -EIO;
+
+ *dev->dma_mask = dma_mask;
+
+ return 0;
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag)
+{
+ struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+ return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+ void *cpu_addr, dma_addr_t dma_handle)
+{
+ struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+ dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+static inline void dma_cache_sync(struct device *dev, void *vaddr,
+ size_t size, enum dma_data_direction direction)
+{
+ unsigned long start = (unsigned long)vaddr;
+ unsigned long end = start + size;
+
+ switch (direction) {
+ case DMA_NONE:
+ BUG();
+ case DMA_FROM_DEVICE:
+ case DMA_BIDIRECTIONAL: /* writeback and invalidate */
+ __cpuc_dma_flush_range(start, end);
+ break;
+ case DMA_TO_DEVICE: /* writeback only */
+ __cpuc_dma_clean_range(start, end);
+ break;
+ }
+}
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/unicore32/include/asm/dma.h b/arch/unicore32/include/asm/dma.h
new file mode 100644
index 00000000000..38dfff9df32
--- /dev/null
+++ b/arch/unicore32/include/asm/dma.h
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/unicore32/include/asm/dma.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_DMA_H__
+#define __UNICORE_DMA_H__
+
+#include <asm/memory.h>
+#include <asm-generic/dma.h>
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#endif
+
+#endif /* __UNICORE_DMA_H__ */
diff --git a/arch/unicore32/include/asm/elf.h b/arch/unicore32/include/asm/elf.h
new file mode 100644
index 00000000000..829042d0772
--- /dev/null
+++ b/arch/unicore32/include/asm/elf.h
@@ -0,0 +1,94 @@
+/*
+ * linux/arch/unicore32/include/asm/elf.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_ELF_H__
+#define __UNICORE_ELF_H__
+
+#include <asm/hwcap.h>
+
+/*
+ * ELF register definitions..
+ */
+#include <asm/ptrace.h>
+
+typedef unsigned long elf_greg_t;
+typedef unsigned long elf_freg_t[3];
+
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct fp_state elf_fpregset_t;
+
+#define EM_UNICORE 110
+
+#define R_UNICORE_NONE 0
+#define R_UNICORE_PC24 1
+#define R_UNICORE_ABS32 2
+#define R_UNICORE_CALL 28
+#define R_UNICORE_JUMP24 29
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_UNICORE
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization. This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ *
+ */
+#define ELF_PLATFORM_SIZE 8
+#define ELF_PLATFORM (elf_platform)
+
+extern char elf_platform[];
+
+struct elf32_hdr;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+extern int elf_check_arch(const struct elf32_hdr *);
+#define elf_check_arch elf_check_arch
+
+struct task_struct;
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
+#define ELF_CORE_COPY_TASK_REGS dump_task_regs
+
+#define ELF_EXEC_PAGESIZE 4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
+
+/* When the program starts, a1 contains a pointer to a function to be
+ registered with atexit, as per the SVR4 ABI. A value of 0 means we
+ have no such handler. */
+#define ELF_PLAT_INIT(_r, load_addr) {(_r)->UCreg_00 = 0; }
+
+extern void elf_set_personality(const struct elf32_hdr *);
+#define SET_PERSONALITY(ex) elf_set_personality(&(ex))
+
+struct mm_struct;
+extern unsigned long arch_randomize_brk(struct mm_struct *mm);
+#define arch_randomize_brk arch_randomize_brk
+
+extern int vectors_user_mapping(void);
+#define arch_setup_additional_pages(bprm, uses_interp) vectors_user_mapping()
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+
+#endif
diff --git a/arch/unicore32/include/asm/fpstate.h b/arch/unicore32/include/asm/fpstate.h
new file mode 100644
index 00000000000..ba97fac6220
--- /dev/null
+++ b/arch/unicore32/include/asm/fpstate.h
@@ -0,0 +1,26 @@
+/*
+ * linux/arch/unicore32/include/asm/fpstate.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_FPSTATE_H__
+#define __UNICORE_FPSTATE_H__
+
+#ifndef __ASSEMBLY__
+
+#define FP_REGS_NUMBER 33
+
+struct fp_state {
+ unsigned int regs[FP_REGS_NUMBER];
+} __attribute__((aligned(8)));
+
+#endif
+
+#endif
diff --git a/arch/unicore32/include/asm/fpu-ucf64.h b/arch/unicore32/include/asm/fpu-ucf64.h
new file mode 100644
index 00000000000..16c1457882e
--- /dev/null
+++ b/arch/unicore32/include/asm/fpu-ucf64.h
@@ -0,0 +1,53 @@
+/*
+ * linux/arch/unicore32/include/asm/fpu-ucf64.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define FPSCR s31
+
+/* FPSCR bits */
+#define FPSCR_DEFAULT_NAN (1<<25)
+
+#define FPSCR_CMPINSTR_BIT (1<<31)
+
+#define FPSCR_CON (1<<29)
+#define FPSCR_TRAP (1<<27)
+
+/* RND mode */
+#define FPSCR_ROUND_NEAREST (0<<0)
+#define FPSCR_ROUND_PLUSINF (2<<0)
+#define FPSCR_ROUND_MINUSINF (3<<0)
+#define FPSCR_ROUND_TOZERO (1<<0)
+#define FPSCR_RMODE_BIT (0)
+#define FPSCR_RMODE_MASK (7 << FPSCR_RMODE_BIT)
+
+/* trap enable */
+#define FPSCR_IOE (1<<16)
+#define FPSCR_OFE (1<<14)
+#define FPSCR_UFE (1<<13)
+#define FPSCR_IXE (1<<12)
+#define FPSCR_HIE (1<<11)
+#define FPSCR_NDE (1<<10) /* non denomal */
+
+/* flags */
+#define FPSCR_IDC (1<<24)
+#define FPSCR_HIC (1<<23)
+#define FPSCR_IXC (1<<22)
+#define FPSCR_OFC (1<<21)
+#define FPSCR_UFC (1<<20)
+#define FPSCR_IOC (1<<19)
+
+/* stick bits */
+#define FPSCR_IOS (1<<9)
+#define FPSCR_OFS (1<<7)
+#define FPSCR_UFS (1<<6)
+#define FPSCR_IXS (1<<5)
+#define FPSCR_HIS (1<<4)
+#define FPSCR_NDS (1<<3) /*non denomal */
diff --git a/arch/unicore32/include/asm/futex.h b/arch/unicore32/include/asm/futex.h
new file mode 100644
index 00000000000..07dea617055
--- /dev/null
+++ b/arch/unicore32/include/asm/futex.h
@@ -0,0 +1,143 @@
+/*
+ * linux/arch/unicore32/include/asm/futex.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_FUTEX_H__
+#define __UNICORE_FUTEX_H__
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/preempt.h>
+#include <linux/uaccess.h>
+#include <linux/errno.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+ __asm__ __volatile__( \
+ "1: ldw.u %1, [%2]\n" \
+ " " insn "\n" \
+ "2: stw.u %0, [%2]\n" \
+ " mov %0, #0\n" \
+ "3:\n" \
+ " .pushsection __ex_table,\"a\"\n" \
+ " .align 3\n" \
+ " .long 1b, 4f, 2b, 4f\n" \
+ " .popsection\n" \
+ " .pushsection .fixup,\"ax\"\n" \
+ "4: mov %0, %4\n" \
+ " b 3b\n" \
+ " .popsection" \
+ : "=&r" (ret), "=&r" (oldval) \
+ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
+ : "cc", "memory")
+
+static inline int
+futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret;
+
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ pagefault_disable(); /* implies preempt_disable() */
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op("or %0, %1, %3", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op("and %0, %1, %3",
+ ret, oldval, uaddr, ~oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op("xor %0, %1, %3", ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ pagefault_enable(); /* subsumes preempt_enable() */
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ:
+ ret = (oldval == cmparg);
+ break;
+ case FUTEX_OP_CMP_NE:
+ ret = (oldval != cmparg);
+ break;
+ case FUTEX_OP_CMP_LT:
+ ret = (oldval < cmparg);
+ break;
+ case FUTEX_OP_CMP_GE:
+ ret = (oldval >= cmparg);
+ break;
+ case FUTEX_OP_CMP_LE:
+ ret = (oldval <= cmparg);
+ break;
+ case FUTEX_OP_CMP_GT:
+ ret = (oldval > cmparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+ int val;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ pagefault_disable(); /* implies preempt_disable() */
+
+ __asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
+ "1: ldw.u %0, [%3]\n"
+ " cmpxor.a %0, %1\n"
+ " bne 3f\n"
+ "2: stw.u %2, [%3]\n"
+ "3:\n"
+ " .pushsection __ex_table,\"a\"\n"
+ " .align 3\n"
+ " .long 1b, 4f, 2b, 4f\n"
+ " .popsection\n"
+ " .pushsection .fixup,\"ax\"\n"
+ "4: mov %0, %4\n"
+ " b 3b\n"
+ " .popsection"
+ : "=&r" (val)
+ : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
+ : "cc", "memory");
+
+ pagefault_enable(); /* subsumes preempt_enable() */
+
+ return val;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __UNICORE_FUTEX_H__ */
diff --git a/arch/unicore32/include/asm/gpio.h b/arch/unicore32/include/asm/gpio.h
new file mode 100644
index 00000000000..2716f14e3ff
--- /dev/null
+++ b/arch/unicore32/include/asm/gpio.h
@@ -0,0 +1,104 @@
+/*
+ * linux/arch/unicore32/include/asm/gpio.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_GPIO_H__
+#define __UNICORE_GPIO_H__
+
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm-generic/gpio.h>
+
+#define GPI_OTP_INT 0
+#define GPI_PCI_INTA 1
+#define GPI_PCI_INTB 2
+#define GPI_PCI_INTC 3
+#define GPI_PCI_INTD 4
+#define GPI_BAT_DET 5
+#define GPI_SD_CD 6
+#define GPI_SOFF_REQ 7
+#define GPI_SD_WP 8
+#define GPI_LCD_CASE_OFF 9
+#define GPO_WIFI_EN 10
+#define GPO_HDD_LED 11
+#define GPO_VGA_EN 12
+#define GPO_LCD_EN 13
+#define GPO_LED_DATA 14
+#define GPO_LED_CLK 15
+#define GPO_CAM_PWR_EN 16
+#define GPO_LCD_VCC_EN 17
+#define GPO_SOFT_OFF 18
+#define GPO_BT_EN 19
+#define GPO_FAN_ON 20
+#define GPO_SPKR 21
+#define GPO_SET_V1 23
+#define GPO_SET_V2 24
+#define GPO_CPU_HEALTH 25
+#define GPO_LAN_SEL 26
+
+#ifdef CONFIG_PUV3_NB0916
+#define GPI_BTN_TOUCH 14
+#define GPIO_IN 0x000043ff /* 1 for input */
+#define GPIO_OUT 0x0fffbc00 /* 1 for output */
+#endif /* CONFIG_PUV3_NB0916 */
+
+#ifdef CONFIG_PUV3_SMW0919
+#define GPIO_IN 0x000003ff /* 1 for input */
+#define GPIO_OUT 0x0ffffc00 /* 1 for output */
+#endif /* CONFIG_PUV3_SMW0919 */
+
+#ifdef CONFIG_PUV3_DB0913
+#define GPIO_IN 0x000001df /* 1 for input */
+#define GPIO_OUT 0x03fee800 /* 1 for output */
+#endif /* CONFIG_PUV3_DB0913 */
+
+#define GPIO_DIR (~((GPIO_IN) | 0xf0000000))
+ /* 0 input, 1 output */
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+ return readl(GPIO_GPLR) & GPIO_GPIO(gpio);
+ else
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+ if (value)
+ writel(GPIO_GPIO(gpio), GPIO_GPSR);
+ else
+ writel(GPIO_GPIO(gpio), GPIO_GPCR);
+ else
+ __gpio_set_value(gpio, value);
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+ if ((gpio < IRQ_GPIOHIGH) && (FIELD(1, 1, gpio) & readl(GPIO_GPIR)))
+ return IRQ_GPIOLOW0 + gpio;
+ else
+ return IRQ_GPIO0 + gpio;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+ if (irq < IRQ_GPIOHIGH)
+ return irq - IRQ_GPIOLOW0;
+ else
+ return irq - IRQ_GPIO0;
+}
+
+#endif /* __UNICORE_GPIO_H__ */
diff --git a/arch/unicore32/include/asm/hwcap.h b/arch/unicore32/include/asm/hwcap.h
new file mode 100644
index 00000000000..97bd40fdd4a
--- /dev/null
+++ b/arch/unicore32/include/asm/hwcap.h
@@ -0,0 +1,32 @@
+/*
+ * linux/arch/unicore32/include/asm/hwcap.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_HWCAP_H__
+#define __UNICORE_HWCAP_H__
+
+/*
+ * HWCAP flags
+ */
+#define HWCAP_MSP 1
+#define HWCAP_UNICORE16 2
+#define HWCAP_CMOV 4
+#define HWCAP_UNICORE_F64 8
+#define HWCAP_TLS 0x80
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this cpu supports.
+ */
+#define ELF_HWCAP (HWCAP_CMOV | HWCAP_UNICORE_F64)
+#endif
+
+#endif
diff --git a/arch/unicore32/include/asm/io.h b/arch/unicore32/include/asm/io.h
new file mode 100644
index 00000000000..4bd87f3d13d
--- /dev/null
+++ b/arch/unicore32/include/asm/io.h
@@ -0,0 +1,55 @@
+/*
+ * linux/arch/unicore32/include/asm/io.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_IO_H__
+#define __UNICORE_IO_H__
+
+#ifdef __KERNEL__
+
+#include <asm/byteorder.h>
+#include <asm/memory.h>
+#include <asm/system.h>
+
+#define PCI_IOBASE PKUNITY_PCILIO_BASE
+#include <asm-generic/io.h>
+
+/*
+ * __uc32_ioremap and __uc32_ioremap_cached takes CPU physical address.
+ */
+extern void __iomem *__uc32_ioremap(unsigned long, size_t);
+extern void __iomem *__uc32_ioremap_cached(unsigned long, size_t);
+extern void __uc32_iounmap(volatile void __iomem *addr);
+
+/*
+ * ioremap and friends.
+ *
+ * ioremap takes a PCI memory address, as specified in
+ * Documentation/IO-mapping.txt.
+ *
+ */
+#define ioremap(cookie, size) __uc32_ioremap(cookie, size)
+#define ioremap_cached(cookie, size) __uc32_ioremap_cached(cookie, size)
+#define iounmap(cookie) __uc32_iounmap(cookie)
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#undef xlate_dev_mem_ptr
+#define xlate_dev_mem_ptr(p) __va(p)
+
+#define HAVE_ARCH_PIO_SIZE
+#define PIO_OFFSET (unsigned int)(PCI_IOBASE)
+#define PIO_MASK (unsigned int)(IO_SPACE_LIMIT)
+#define PIO_RESERVED (PIO_OFFSET + PIO_MASK + 1)
+
+#endif /* __KERNEL__ */
+#endif /* __UNICORE_IO_H__ */
diff --git a/arch/unicore32/include/asm/irq.h b/arch/unicore32/include/asm/irq.h
new file mode 100644
index 00000000000..baea93e2a6e
--- /dev/null
+++ b/arch/unicore32/include/asm/irq.h
@@ -0,0 +1,105 @@
+/*
+ * linux/arch/unicore32/include/asm/irq.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_IRQ_H__
+#define __UNICORE_IRQ_H__
+
+#include <asm-generic/irq.h>
+
+#define IRQ_GPIOLOW0 0x00
+#define IRQ_GPIOLOW1 0x01
+#define IRQ_GPIOLOW2 0x02
+#define IRQ_GPIOLOW3 0x03
+#define IRQ_GPIOLOW4 0x04
+#define IRQ_GPIOLOW5 0x05
+#define IRQ_GPIOLOW6 0x06
+#define IRQ_GPIOLOW7 0x07
+#define IRQ_GPIOHIGH 0x08
+#define IRQ_USB 0x09
+#define IRQ_SDC 0x0a
+#define IRQ_AC97 0x0b
+#define IRQ_SATA 0x0c
+#define IRQ_MME 0x0d
+#define IRQ_PCI_BRIDGE 0x0e
+#define IRQ_DDR 0x0f
+#define IRQ_SPI 0x10
+#define IRQ_UNIGFX 0x11
+#define IRQ_I2C 0x11
+#define IRQ_UART1 0x12
+#define IRQ_UART0 0x13
+#define IRQ_UMAL 0x14
+#define IRQ_NAND 0x15
+#define IRQ_PS2_KBD 0x16
+#define IRQ_PS2_AUX 0x17
+#define IRQ_DMA 0x18
+#define IRQ_DMAERR 0x19
+#define IRQ_TIMER0 0x1a
+#define IRQ_TIMER1 0x1b
+#define IRQ_TIMER2 0x1c
+#define IRQ_TIMER3 0x1d
+#define IRQ_RTC 0x1e
+#define IRQ_RTCAlarm 0x1f
+
+#define IRQ_GPIO0 0x20
+#define IRQ_GPIO1 0x21
+#define IRQ_GPIO2 0x22
+#define IRQ_GPIO3 0x23
+#define IRQ_GPIO4 0x24
+#define IRQ_GPIO5 0x25
+#define IRQ_GPIO6 0x26
+#define IRQ_GPIO7 0x27
+#define IRQ_GPIO8 0x28
+#define IRQ_GPIO9 0x29
+#define IRQ_GPIO10 0x2a
+#define IRQ_GPIO11 0x2b
+#define IRQ_GPIO12 0x2c
+#define IRQ_GPIO13 0x2d
+#define IRQ_GPIO14 0x2e
+#define IRQ_GPIO15 0x2f
+#define IRQ_GPIO16 0x30
+#define IRQ_GPIO17 0x31
+#define IRQ_GPIO18 0x32
+#define IRQ_GPIO19 0x33
+#define IRQ_GPIO20 0x34
+#define IRQ_GPIO21 0x35
+#define IRQ_GPIO22 0x36
+#define IRQ_GPIO23 0x37
+#define IRQ_GPIO24 0x38
+#define IRQ_GPIO25 0x39
+#define IRQ_GPIO26 0x3a
+#define IRQ_GPIO27 0x3b
+
+#ifdef CONFIG_ARCH_FPGA
+#define IRQ_PCIINTA IRQ_GPIOLOW2
+#define IRQ_PCIINTB IRQ_GPIOLOW1
+#define IRQ_PCIINTC IRQ_GPIOLOW0
+#define IRQ_PCIINTD IRQ_GPIOLOW6
+#endif
+
+#if defined(CONFIG_PUV3_DB0913) || defined(CONFIG_PUV3_NB0916) \
+ || defined(CONFIG_PUV3_SMW0919)
+#define IRQ_PCIINTA IRQ_GPIOLOW1
+#define IRQ_PCIINTB IRQ_GPIOLOW2
+#define IRQ_PCIINTC IRQ_GPIOLOW3
+#define IRQ_PCIINTD IRQ_GPIOLOW4
+#endif
+
+#define IRQ_SD_CD IRQ_GPIO6 /* falling or rising trigger */
+
+#ifndef __ASSEMBLY__
+struct pt_regs;
+
+extern void asm_do_IRQ(unsigned int, struct pt_regs *);
+
+#endif
+
+#endif
+
diff --git a/arch/unicore32/include/asm/irqflags.h b/arch/unicore32/include/asm/irqflags.h
new file mode 100644
index 00000000000..6d8a28dfdba
--- /dev/null
+++ b/arch/unicore32/include/asm/irqflags.h
@@ -0,0 +1,53 @@
+/*
+ * linux/arch/unicore32/include/asm/irqflags.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_IRQFLAGS_H__
+#define __UNICORE_IRQFLAGS_H__
+
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+
+#define ARCH_IRQ_DISABLED (PRIV_MODE | PSR_I_BIT)
+#define ARCH_IRQ_ENABLED (PRIV_MODE)
+
+/*
+ * Save the current interrupt enable state.
+ */
+static inline unsigned long arch_local_save_flags(void)
+{
+ unsigned long temp;
+
+ asm volatile("mov %0, asr" : "=r" (temp) : : "memory", "cc");
+
+ return temp & PSR_c;
+}
+
+/*
+ * restore saved IRQ state
+ */
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+ unsigned long temp;
+
+ asm volatile(
+ "mov %0, asr\n"
+ "mov.a asr, %1\n"
+ "mov.f asr, %0"
+ : "=&r" (temp)
+ : "r" (flags)
+ : "memory", "cc");
+}
+
+#include <asm-generic/irqflags.h>
+
+#endif
+#endif
diff --git a/arch/unicore32/include/asm/linkage.h b/arch/unicore32/include/asm/linkage.h
new file mode 100644
index 00000000000..d1618bd35b6
--- /dev/null
+++ b/arch/unicore32/include/asm/linkage.h
@@ -0,0 +1,22 @@
+/*
+ * linux/arch/unicore32/include/asm/linkage.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_LINKAGE_H__
+#define __UNICORE_LINKAGE_H__
+
+#define __ALIGN .align 0
+#define __ALIGN_STR ".align 0"
+
+#define ENDPROC(name) \
+ .type name, %function; \
+ END(name)
+
+#endif
diff --git a/arch/unicore32/include/asm/memblock.h b/arch/unicore32/include/asm/memblock.h
new file mode 100644
index 00000000000..a8a5d8d0a26
--- /dev/null
+++ b/arch/unicore32/include/asm/memblock.h
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/unicore32/include/asm/memblock.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_MEMBLOCK_H__
+#define __UNICORE_MEMBLOCK_H__
+
+/*
+ * Memory map description
+ */
+# define NR_BANKS 8
+
+struct membank {
+ unsigned long start;
+ unsigned long size;
+ unsigned int highmem;
+};
+
+struct meminfo {
+ int nr_banks;
+ struct membank bank[NR_BANKS];
+};
+
+extern struct meminfo meminfo;
+
+#define for_each_bank(iter, mi) \
+ for (iter = 0; iter < (mi)->nr_banks; iter++)
+
+#define bank_pfn_start(bank) __phys_to_pfn((bank)->start)
+#define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size)
+#define bank_pfn_size(bank) ((bank)->size >> PAGE_SHIFT)
+#define bank_phys_start(bank) ((bank)->start)
+#define bank_phys_end(bank) ((bank)->start + (bank)->size)
+#define bank_phys_size(bank) ((bank)->size)
+
+extern void uc32_memblock_init(struct meminfo *);
+
+#endif
diff --git a/arch/unicore32/include/asm/memory.h b/arch/unicore32/include/asm/memory.h
new file mode 100644
index 00000000000..5eddb997def
--- /dev/null
+++ b/arch/unicore32/include/asm/memory.h
@@ -0,0 +1,123 @@
+/*
+ * linux/arch/unicore32/include/asm/memory.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Note: this file should not be included by non-asm/.h files
+ */
+#ifndef __UNICORE_MEMORY_H__
+#define __UNICORE_MEMORY_H__
+
+#include <linux/compiler.h>
+#include <linux/const.h>
+#include <asm/sizes.h>
+#include <mach/memory.h>
+
+/*
+ * Allow for constants defined here to be used from assembly code
+ * by prepending the UL suffix only with actual C code compilation.
+ */
+#define UL(x) _AC(x, UL)
+
+/*
+ * PAGE_OFFSET - the virtual address of the start of the kernel image
+ * TASK_SIZE - the maximum size of a user space task.
+ * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
+ */
+#define PAGE_OFFSET UL(0xC0000000)
+#define TASK_SIZE (PAGE_OFFSET - UL(0x41000000))
+#define TASK_UNMAPPED_BASE (PAGE_OFFSET / 3)
+
+/*
+ * The module space lives between the addresses given by TASK_SIZE
+ * and PAGE_OFFSET - it must be within 32MB of the kernel text.
+ */
+#define MODULES_VADDR (PAGE_OFFSET - 16*1024*1024)
+#if TASK_SIZE > MODULES_VADDR
+#error Top of user space clashes with start of module space
+#endif
+
+#define MODULES_END (PAGE_OFFSET)
+
+/*
+ * Allow 16MB-aligned ioremap pages
+ */
+#define IOREMAP_MAX_ORDER 24
+
+/*
+ * Physical vs virtual RAM address space conversion. These are
+ * private definitions which should NOT be used outside memory.h
+ * files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+#ifndef __virt_to_phys
+#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
+
+/*
+ * Convert a physical address to a Page Frame Number and back
+ */
+#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT)
+#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT)
+
+/*
+ * Convert a page to/from a physical address
+ */
+#define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page)))
+#define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys)))
+
+#ifndef __ASSEMBLY__
+
+#ifndef arch_adjust_zones
+#define arch_adjust_zones(size, holes) do { } while (0)
+#endif
+
+/*
+ * PFNs are used to describe any physical page; this means
+ * PFN 0 == physical address 0.
+ *
+ * This is the PFN of the first RAM page in the kernel
+ * direct-mapped view. We assume this is the first page
+ * of RAM in the mem_map as well.
+ */
+#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT)
+
+/*
+ * Drivers should NOT use these either.
+ */
+#define __pa(x) __virt_to_phys((unsigned long)(x))
+#define __va(x) ((void *)__phys_to_virt((unsigned long)(x)))
+#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
+
+/*
+ * Conversion between a struct page and a physical address.
+ *
+ * Note: when converting an unknown physical address to a
+ * struct page, the resulting pointer must be validated
+ * using VALID_PAGE(). It must return an invalid struct page
+ * for any physical address not corresponding to a system
+ * RAM address.
+ *
+ * page_to_pfn(page) convert a struct page * to a PFN number
+ * pfn_to_page(pfn) convert a _valid_ PFN number to struct page *
+ *
+ * virt_to_page(k) convert a _valid_ virtual address to struct page *
+ * virt_addr_valid(k) indicates whether a virtual address is valid
+ */
+#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET
+
+#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && \
+ (unsigned long)(kaddr) < (unsigned long)high_memory)
+
+#endif
+
+#include <asm-generic/memory_model.h>
+
+#endif
diff --git a/arch/unicore32/include/asm/mmu.h b/arch/unicore32/include/asm/mmu.h
new file mode 100644
index 00000000000..66fa341dc2c
--- /dev/null
+++ b/arch/unicore32/include/asm/mmu.h
@@ -0,0 +1,17 @@
+/*
+ * linux/arch/unicore32/include/asm/mmu.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_MMU_H__
+#define __UNICORE_MMU_H__
+
+typedef unsigned long mm_context_t;
+
+#endif
diff --git a/arch/unicore32/include/asm/mmu_context.h b/arch/unicore32/include/asm/mmu_context.h
new file mode 100644
index 00000000000..fb5e4c658f7
--- /dev/null
+++ b/arch/unicore32/include/asm/mmu_context.h
@@ -0,0 +1,87 @@
+/*
+ * linux/arch/unicore32/include/asm/mmu_context.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_MMU_CONTEXT_H__
+#define __UNICORE_MMU_CONTEXT_H__
+
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cpu-single.h>
+
+#define init_new_context(tsk, mm) 0
+
+#define destroy_context(mm) do { } while (0)
+
+/*
+ * This is called when "tsk" is about to enter lazy TLB mode.
+ *
+ * mm: describes the currently active mm context
+ * tsk: task which is entering lazy tlb
+ * cpu: cpu number which is entering lazy tlb
+ *
+ * tsk->mm will be NULL
+ */
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * This is the actual mm switch as far as the scheduler
+ * is concerned. No registers are touched. We avoid
+ * calling the CPU specific function when the mm hasn't
+ * actually changed.
+ */
+static inline void
+switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ unsigned int cpu = smp_processor_id();
+
+ if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next)
+ cpu_switch_mm(next->pgd, next);
+}
+
+#define deactivate_mm(tsk, mm) do { } while (0)
+#define activate_mm(prev, next) switch_mm(prev, next, NULL)
+
+/*
+ * We are inserting a "fake" vma for the user-accessible vector page so
+ * gdb and friends can get to it through ptrace and /proc/<pid>/mem.
+ * But we also want to remove it before the generic code gets to see it
+ * during process exit or the unmapping of it would cause total havoc.
+ * (the macro is used as remove_vma() is static to mm/mmap.c)
+ */
+#define arch_exit_mmap(mm) \
+do { \
+ struct vm_area_struct *high_vma = find_vma(mm, 0xffff0000); \
+ if (high_vma) { \
+ BUG_ON(high_vma->vm_next); /* it should be last */ \
+ if (high_vma->vm_prev) \
+ high_vma->vm_prev->vm_next = NULL; \
+ else \
+ mm->mmap = NULL; \
+ rb_erase(&high_vma->vm_rb, &mm->mm_rb); \
+ mm->mmap_cache = NULL; \
+ mm->map_count--; \
+ remove_vma(high_vma); \
+ } \
+} while (0)
+
+static inline void arch_dup_mmap(struct mm_struct *oldmm,
+ struct mm_struct *mm)
+{
+}
+
+#endif
diff --git a/arch/unicore32/include/asm/mutex.h b/arch/unicore32/include/asm/mutex.h
new file mode 100644
index 00000000000..fab7d0e8adf
--- /dev/null
+++ b/arch/unicore32/include/asm/mutex.h
@@ -0,0 +1,20 @@
+/*
+ * linux/arch/unicore32/include/asm/mutex.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * UniCore optimized mutex locking primitives
+ *
+ * Please look into asm-generic/mutex-xchg.h for a formal definition.
+ */
+#ifndef __UNICORE_MUTEX_H__
+#define __UNICORE_MUTEX_H__
+
+# include <asm-generic/mutex-xchg.h>
+#endif
diff --git a/arch/unicore32/include/asm/page.h b/arch/unicore32/include/asm/page.h
new file mode 100644
index 00000000000..594b3226250
--- /dev/null
+++ b/arch/unicore32/include/asm/page.h
@@ -0,0 +1,80 @@
+/*
+ * linux/arch/unicore32/include/asm/page.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_PAGE_H__
+#define __UNICORE_PAGE_H__
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT 12
+#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#ifndef __ASSEMBLY__
+
+struct page;
+struct vm_area_struct;
+
+#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
+extern void copy_page(void *to, const void *from);
+
+#define clear_user_page(page, vaddr, pg) clear_page(page)
+#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x) ((x).pte)
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) })
+#define __pgd(x) ((pgd_t) { (x) })
+#define __pgprot(x) ((pgprot_t) { (x) })
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned long pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x) (x)
+#define pgd_val(x) (x)
+#define pgprot_val(x) (x)
+
+#define __pte(x) (x)
+#define __pgd(x) (x)
+#define __pgprot(x) (x)
+
+#endif /* STRICT_MM_TYPECHECKS */
+
+typedef struct page *pgtable_t;
+
+extern int pfn_valid(unsigned long);
+
+#include <asm/memory.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS \
+ (VM_READ | VM_WRITE | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/getorder.h>
+
+#endif
diff --git a/arch/unicore32/include/asm/pci.h b/arch/unicore32/include/asm/pci.h
new file mode 100644
index 00000000000..c5b28b45953
--- /dev/null
+++ b/arch/unicore32/include/asm/pci.h
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/unicore32/include/asm/pci.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_PCI_H__
+#define __UNICORE_PCI_H__
+
+#ifdef __KERNEL__
+#include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci.h>
+#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+ /* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+ /* We don't do dynamic PCI IRQ allocation */
+}
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+ enum pci_dma_burst_strategy *strat,
+ unsigned long *strategy_parameter)
+{
+ *strat = PCI_DMA_BURST_INFINITY;
+ *strategy_parameter = ~0UL;
+}
+#endif
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/unicore32/include/asm/pgalloc.h b/arch/unicore32/include/asm/pgalloc.h
new file mode 100644
index 00000000000..0213e373a89
--- /dev/null
+++ b/arch/unicore32/include/asm/pgalloc.h
@@ -0,0 +1,110 @@
+/*
+ * linux/arch/unicore32/include/asm/pgalloc.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_PGALLOC_H__
+#define __UNICORE_PGALLOC_H__
+
+#include <asm/pgtable-hwdef.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#define check_pgt_cache() do { } while (0)
+
+#define _PAGE_USER_TABLE (PMD_TYPE_TABLE | PMD_PRESENT)
+#define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_PRESENT)
+
+extern pgd_t *get_pgd_slow(struct mm_struct *mm);
+extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
+
+#define pgd_alloc(mm) get_pgd_slow(mm)
+#define pgd_free(mm, pgd) free_pgd_slow(mm, pgd)
+
+#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+
+/*
+ * Allocate one PTE table.
+ */
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
+{
+ pte_t *pte;
+
+ pte = (pte_t *)__get_free_page(PGALLOC_GFP);
+ if (pte)
+ clean_dcache_area(pte, PTRS_PER_PTE * sizeof(pte_t));
+
+ return pte;
+}
+
+static inline pgtable_t
+pte_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+ struct page *pte;
+
+ pte = alloc_pages(PGALLOC_GFP, 0);
+ if (pte) {
+ if (!PageHighMem(pte)) {
+ void *page = page_address(pte);
+ clean_dcache_area(page, PTRS_PER_PTE * sizeof(pte_t));
+ }
+ pgtable_page_ctor(pte);
+ }
+
+ return pte;
+}
+
+/*
+ * Free one PTE table.
+ */
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ if (pte)
+ free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+ pgtable_page_dtor(pte);
+ __free_page(pte);
+}
+
+static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval)
+{
+ set_pmd(pmdp, __pmd(pmdval));
+ flush_pmd_entry(pmdp);
+}
+
+/*
+ * Populate the pmdp entry with a pointer to the pte. This pmd is part
+ * of the mm address space.
+ */
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
+{
+ unsigned long pte_ptr = (unsigned long)ptep;
+
+ /*
+ * The pmd must be loaded with the physical
+ * address of the PTE table
+ */
+ __pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE);
+}
+
+static inline void
+pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
+{
+ __pmd_populate(pmdp,
+ page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE);
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+#endif
diff --git a/arch/unicore32/include/asm/pgtable-hwdef.h b/arch/unicore32/include/asm/pgtable-hwdef.h
new file mode 100644
index 00000000000..7314e859cca
--- /dev/null
+++ b/arch/unicore32/include/asm/pgtable-hwdef.h
@@ -0,0 +1,55 @@
+/*
+ * linux/arch/unicore32/include/asm/pgtable-hwdef.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_PGTABLE_HWDEF_H__
+#define __UNICORE_PGTABLE_HWDEF_H__
+
+/*
+ * Hardware page table definitions.
+ *
+ * + Level 1 descriptor (PMD)
+ * - common
+ */
+#define PMD_TYPE_MASK (3 << 0)
+#define PMD_TYPE_TABLE (0 << 0)
+/*#define PMD_TYPE_LARGE (1 << 0) */
+#define PMD_TYPE_INVALID (2 << 0)
+#define PMD_TYPE_SECT (3 << 0)
+
+#define PMD_PRESENT (1 << 2)
+#define PMD_YOUNG (1 << 3)
+
+/*#define PMD_SECT_DIRTY (1 << 4) */
+#define PMD_SECT_CACHEABLE (1 << 5)
+#define PMD_SECT_EXEC (1 << 6)
+#define PMD_SECT_WRITE (1 << 7)
+#define PMD_SECT_READ (1 << 8)
+
+/*
+ * + Level 2 descriptor (PTE)
+ * - common
+ */
+#define PTE_TYPE_MASK (3 << 0)
+#define PTE_TYPE_SMALL (0 << 0)
+#define PTE_TYPE_MIDDLE (1 << 0)
+#define PTE_TYPE_LARGE (2 << 0)
+#define PTE_TYPE_INVALID (3 << 0)
+
+#define PTE_PRESENT (1 << 2)
+#define PTE_FILE (1 << 3) /* only when !PRESENT */
+#define PTE_YOUNG (1 << 3)
+#define PTE_DIRTY (1 << 4)
+#define PTE_CACHEABLE (1 << 5)
+#define PTE_EXEC (1 << 6)
+#define PTE_WRITE (1 << 7)
+#define PTE_READ (1 << 8)
+
+#endif
diff --git a/arch/unicore32/include/asm/pgtable.h b/arch/unicore32/include/asm/pgtable.h
new file mode 100644
index 00000000000..68b2f297ac9
--- /dev/null
+++ b/arch/unicore32/include/asm/pgtable.h
@@ -0,0 +1,317 @@
+/*
+ * linux/arch/unicore32/include/asm/pgtable.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_PGTABLE_H__
+#define __UNICORE_PGTABLE_H__
+
+#include <asm-generic/pgtable-nopmd.h>
+#include <asm/cpu-single.h>
+
+#include <asm/memory.h>
+#include <asm/pgtable-hwdef.h>
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts. That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ *
+ * Note that platforms may override VMALLOC_START, but they must provide
+ * VMALLOC_END. VMALLOC_END defines the (exclusive) limit of this space,
+ * which may not overlap IO space.
+ */
+#ifndef VMALLOC_START
+#define VMALLOC_OFFSET SZ_8M
+#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) \
+ & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END (0xff000000UL)
+#endif
+
+#define PTRS_PER_PTE 1024
+#define PTRS_PER_PGD 1024
+
+/*
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#define PGDIR_SHIFT 22
+
+#ifndef __ASSEMBLY__
+extern void __pte_error(const char *file, int line, unsigned long val);
+extern void __pgd_error(const char *file, int line, unsigned long val);
+
+#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte_val(pte))
+#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd_val(pgd))
+#endif /* !__ASSEMBLY__ */
+
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/*
+ * This is the lowest virtual address we can permit any user space
+ * mapping to be mapped at. This is particularly important for
+ * non-high vector CPUs.
+ */
+#define FIRST_USER_ADDRESS PAGE_SIZE
+
+#define FIRST_USER_PGD_NR 1
+#define USER_PTRS_PER_PGD ((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR)
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT 22
+#define SECTION_SIZE (1UL << SECTION_SHIFT)
+#define SECTION_MASK (~(SECTION_SIZE-1))
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The pgprot_* and protection_map entries will be fixed up in runtime
+ * to include the cachable bits based on memory policy, as well as any
+ * architecture dependent bits.
+ */
+#define _PTE_DEFAULT (PTE_PRESENT | PTE_YOUNG | PTE_CACHEABLE)
+
+extern pgprot_t pgprot_user;
+extern pgprot_t pgprot_kernel;
+
+#define PAGE_NONE pgprot_user
+#define PAGE_SHARED __pgprot(pgprot_val(pgprot_user | PTE_READ \
+ | PTE_WRITE)
+#define PAGE_SHARED_EXEC __pgprot(pgprot_val(pgprot_user | PTE_READ \
+ | PTE_WRITE \
+ | PTE_EXEC)
+#define PAGE_COPY __pgprot(pgprot_val(pgprot_user | PTE_READ)
+#define PAGE_COPY_EXEC __pgprot(pgprot_val(pgprot_user | PTE_READ \
+ | PTE_EXEC)
+#define PAGE_READONLY __pgprot(pgprot_val(pgprot_user | PTE_READ)
+#define PAGE_READONLY_EXEC __pgprot(pgprot_val(pgprot_user | PTE_READ \
+ | PTE_EXEC)
+#define PAGE_KERNEL pgprot_kernel
+#define PAGE_KERNEL_EXEC __pgprot(pgprot_val(pgprot_kernel | PTE_EXEC))
+
+#define __PAGE_NONE __pgprot(_PTE_DEFAULT)
+#define __PAGE_SHARED __pgprot(_PTE_DEFAULT | PTE_READ \
+ | PTE_WRITE)
+#define __PAGE_SHARED_EXEC __pgprot(_PTE_DEFAULT | PTE_READ \
+ | PTE_WRITE \
+ | PTE_EXEC)
+#define __PAGE_COPY __pgprot(_PTE_DEFAULT | PTE_READ)
+#define __PAGE_COPY_EXEC __pgprot(_PTE_DEFAULT | PTE_READ \
+ | PTE_EXEC)
+#define __PAGE_READONLY __pgprot(_PTE_DEFAULT | PTE_READ)
+#define __PAGE_READONLY_EXEC __pgprot(_PTE_DEFAULT | PTE_READ \
+ | PTE_EXEC)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The table below defines the page protection levels that we insert into our
+ * Linux page table version. These get translated into the best that the
+ * architecture can perform. Note that on UniCore hardware:
+ * 1) We cannot do execute protection
+ * 2) If we could do execute protection, then read is implied
+ * 3) write implies read permissions
+ */
+#define __P000 __PAGE_NONE
+#define __P001 __PAGE_READONLY
+#define __P010 __PAGE_COPY
+#define __P011 __PAGE_COPY
+#define __P100 __PAGE_READONLY_EXEC
+#define __P101 __PAGE_READONLY_EXEC
+#define __P110 __PAGE_COPY_EXEC
+#define __P111 __PAGE_COPY_EXEC
+
+#define __S000 __PAGE_NONE
+#define __S001 __PAGE_READONLY
+#define __S010 __PAGE_SHARED
+#define __S011 __PAGE_SHARED
+#define __S100 __PAGE_READONLY_EXEC
+#define __S101 __PAGE_READONLY_EXEC
+#define __S110 __PAGE_SHARED_EXEC
+#define __S111 __PAGE_SHARED_EXEC
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr) (empty_zero_page)
+
+#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot) (__pte(((pfn) << PAGE_SHIFT) \
+ | pgprot_val(prot)))
+
+#define pte_none(pte) (!pte_val(pte))
+#define pte_clear(mm, addr, ptep) set_pte(ptep, __pte(0))
+#define pte_page(pte) (pfn_to_page(pte_pfn(pte)))
+#define pte_offset_kernel(dir, addr) (pmd_page_vaddr(*(dir)) \
+ + __pte_index(addr))
+
+#define pte_offset_map(dir, addr) (pmd_page_vaddr(*(dir)) \
+ + __pte_index(addr))
+#define pte_unmap(pte) do { } while (0)
+
+#define set_pte(ptep, pte) cpu_set_pte(ptep, pte)
+
+#define set_pte_at(mm, addr, ptep, pteval) \
+ do { \
+ set_pte(ptep, pteval); \
+ } while (0)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_present(pte) (pte_val(pte) & PTE_PRESENT)
+#define pte_write(pte) (pte_val(pte) & PTE_WRITE)
+#define pte_dirty(pte) (pte_val(pte) & PTE_DIRTY)
+#define pte_young(pte) (pte_val(pte) & PTE_YOUNG)
+#define pte_exec(pte) (pte_val(pte) & PTE_EXEC)
+#define pte_special(pte) (0)
+
+#define PTE_BIT_FUNC(fn, op) \
+static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+PTE_BIT_FUNC(wrprotect, &= ~PTE_WRITE);
+PTE_BIT_FUNC(mkwrite, |= PTE_WRITE);
+PTE_BIT_FUNC(mkclean, &= ~PTE_DIRTY);
+PTE_BIT_FUNC(mkdirty, |= PTE_DIRTY);
+PTE_BIT_FUNC(mkold, &= ~PTE_YOUNG);
+PTE_BIT_FUNC(mkyoung, |= PTE_YOUNG);
+
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+/*
+ * Mark the prot value as uncacheable.
+ */
+#define pgprot_noncached(prot) \
+ __pgprot(pgprot_val(prot) & ~PTE_CACHEABLE)
+#define pgprot_writecombine(prot) \
+ __pgprot(pgprot_val(prot) & ~PTE_CACHEABLE)
+#define pgprot_dmacoherent(prot) \
+ __pgprot(pgprot_val(prot) & ~PTE_CACHEABLE)
+
+#define pmd_none(pmd) (!pmd_val(pmd))
+#define pmd_present(pmd) (pmd_val(pmd) & PMD_PRESENT)
+#define pmd_bad(pmd) (((pmd_val(pmd) & \
+ (PMD_PRESENT | PMD_TYPE_MASK)) \
+ != (PMD_PRESENT | PMD_TYPE_TABLE)))
+
+#define set_pmd(pmdpd, pmdval) \
+ do { \
+ *(pmdpd) = pmdval; \
+ } while (0)
+
+#define pmd_clear(pmdp) \
+ do { \
+ set_pmd(pmdp, __pmd(0));\
+ clean_pmd_entry(pmdp); \
+ } while (0)
+
+#define pmd_page_vaddr(pmd) ((pte_t *)__va(pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(addr) ((addr) >> PGDIR_SHIFT)
+
+#define pgd_offset(mm, addr) ((mm)->pgd+pgd_index(addr))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(addr) pgd_offset(&init_mm, addr)
+
+/* Find an entry in the third-level page table.. */
+#define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ const unsigned long mask = PTE_EXEC | PTE_WRITE | PTE_READ;
+ pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
+ return pte;
+}
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/*
+ * Encode and decode a swap entry. Swap entries are stored in the Linux
+ * page tables as follows:
+ *
+ * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * <--------------- offset --------------> <--- type --> 0 0 0 0 0
+ *
+ * This gives us up to 127 swap files and 32GB per swap file. Note that
+ * the offset field is always non-zero.
+ */
+#define __SWP_TYPE_SHIFT 5
+#define __SWP_TYPE_BITS 7
+#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+
+#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) \
+ & __SWP_TYPE_MASK)
+#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_entry(type, offset) ((swp_entry_t) { \
+ ((type) << __SWP_TYPE_SHIFT) | \
+ ((offset) << __SWP_OFFSET_SHIFT) })
+
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val })
+
+/*
+ * It is an error for the kernel to have more swap files than we can
+ * encode in the PTEs. This ensures that we know when MAX_SWAPFILES
+ * is increased beyond what we presently support.
+ */
+#define MAX_SWAPFILES_CHECK() \
+ BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
+/*
+ * Encode and decode a file entry. File entries are stored in the Linux
+ * page tables as follows:
+ *
+ * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * <----------------------- offset ----------------------> 1 0 0 0
+ */
+#define pte_file(pte) (pte_val(pte) & PTE_FILE)
+#define pte_to_pgoff(x) (pte_val(x) >> 4)
+#define pgoff_to_pte(x) __pte(((x) << 4) | PTE_FILE)
+
+#define PTE_FILE_MAX_BITS 28
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+/* FIXME: this is not correct */
+#define kern_addr_valid(addr) (1)
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * remap a physical page `pfn' of size `size' with page protection `prot'
+ * into virtual address `from'
+ */
+#define io_remap_pfn_range(vma, from, pfn, size, prot) \
+ remap_pfn_range(vma, from, pfn, size, prot)
+
+#define pgtable_cache_init() do { } while (0)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __UNICORE_PGTABLE_H__ */
diff --git a/arch/unicore32/include/asm/processor.h b/arch/unicore32/include/asm/processor.h
new file mode 100644
index 00000000000..e11cb078657
--- /dev/null
+++ b/arch/unicore32/include/asm/processor.h
@@ -0,0 +1,92 @@
+/*
+ * linux/arch/unicore32/include/asm/processor.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_PROCESSOR_H__
+#define __UNICORE_PROCESSOR_H__
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+#ifdef __KERNEL__
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX TASK_SIZE
+#endif
+
+struct debug_entry {
+ u32 address;
+ u32 insn;
+};
+
+struct debug_info {
+ int nsaved;
+ struct debug_entry bp[2];
+};
+
+struct thread_struct {
+ /* fault info */
+ unsigned long address;
+ unsigned long trap_no;
+ unsigned long error_code;
+ /* debugging */
+ struct debug_info debug;
+};
+
+#define INIT_THREAD { }
+
+#define start_thread(regs, pc, sp) \
+({ \
+ unsigned long *stack = (unsigned long *)sp; \
+ set_fs(USER_DS); \
+ memset(regs->uregs, 0, sizeof(regs->uregs)); \
+ regs->UCreg_asr = USER_MODE; \
+ regs->UCreg_pc = pc & ~1; /* pc */ \
+ regs->UCreg_sp = sp; /* sp */ \
+ regs->UCreg_02 = stack[2]; /* r2 (envp) */ \
+ regs->UCreg_01 = stack[1]; /* r1 (argv) */ \
+ regs->UCreg_00 = stack[0]; /* r0 (argc) */ \
+})
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while (0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define cpu_relax() barrier()
+
+/*
+ * Create a new kernel thread
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+#define task_pt_regs(p) \
+ ((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
+
+#define KSTK_EIP(tsk) (task_pt_regs(tsk)->UCreg_pc)
+#define KSTK_ESP(tsk) (task_pt_regs(tsk)->UCreg_sp)
+
+#endif
+
+#endif /* __UNICORE_PROCESSOR_H__ */
diff --git a/arch/unicore32/include/asm/ptrace.h b/arch/unicore32/include/asm/ptrace.h
new file mode 100644
index 00000000000..b9caf9b0997
--- /dev/null
+++ b/arch/unicore32/include/asm/ptrace.h
@@ -0,0 +1,133 @@
+/*
+ * linux/arch/unicore32/include/asm/ptrace.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_PTRACE_H__
+#define __UNICORE_PTRACE_H__
+
+#define PTRACE_GET_THREAD_AREA 22
+
+/*
+ * PSR bits
+ */
+#define USER_MODE 0x00000010
+#define REAL_MODE 0x00000011
+#define INTR_MODE 0x00000012
+#define PRIV_MODE 0x00000013
+#define ABRT_MODE 0x00000017
+#define EXTN_MODE 0x0000001b
+#define SUSR_MODE 0x0000001f
+#define MODE_MASK 0x0000001f
+#define PSR_R_BIT 0x00000040
+#define PSR_I_BIT 0x00000080
+#define PSR_V_BIT 0x10000000
+#define PSR_C_BIT 0x20000000
+#define PSR_Z_BIT 0x40000000
+#define PSR_S_BIT 0x80000000
+
+/*
+ * Groups of PSR bits
+ */
+#define PSR_f 0xff000000 /* Flags */
+#define PSR_c 0x000000ff /* Control */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored on the
+ * stack during a system call. Note that sizeof(struct pt_regs)
+ * has to be a multiple of 8.
+ */
+struct pt_regs {
+ unsigned long uregs[34];
+};
+
+#define UCreg_asr uregs[32]
+#define UCreg_pc uregs[31]
+#define UCreg_lr uregs[30]
+#define UCreg_sp uregs[29]
+#define UCreg_ip uregs[28]
+#define UCreg_fp uregs[27]
+#define UCreg_26 uregs[26]
+#define UCreg_25 uregs[25]
+#define UCreg_24 uregs[24]
+#define UCreg_23 uregs[23]
+#define UCreg_22 uregs[22]
+#define UCreg_21 uregs[21]
+#define UCreg_20 uregs[20]
+#define UCreg_19 uregs[19]
+#define UCreg_18 uregs[18]
+#define UCreg_17 uregs[17]
+#define UCreg_16 uregs[16]
+#define UCreg_15 uregs[15]
+#define UCreg_14 uregs[14]
+#define UCreg_13 uregs[13]
+#define UCreg_12 uregs[12]
+#define UCreg_11 uregs[11]
+#define UCreg_10 uregs[10]
+#define UCreg_09 uregs[9]
+#define UCreg_08 uregs[8]
+#define UCreg_07 uregs[7]
+#define UCreg_06 uregs[6]
+#define UCreg_05 uregs[5]
+#define UCreg_04 uregs[4]
+#define UCreg_03 uregs[3]
+#define UCreg_02 uregs[2]
+#define UCreg_01 uregs[1]
+#define UCreg_00 uregs[0]
+#define UCreg_ORIG_00 uregs[33]
+
+#ifdef __KERNEL__
+
+#define user_mode(regs) \
+ (processor_mode(regs) == USER_MODE)
+
+#define processor_mode(regs) \
+ ((regs)->UCreg_asr & MODE_MASK)
+
+#define interrupts_enabled(regs) \
+ (!((regs)->UCreg_asr & PSR_I_BIT))
+
+#define fast_interrupts_enabled(regs) \
+ (!((regs)->UCreg_asr & PSR_R_BIT))
+
+/* Are the current registers suitable for user mode?
+ * (used to maintain security in signal handlers)
+ */
+static inline int valid_user_regs(struct pt_regs *regs)
+{
+ unsigned long mode = regs->UCreg_asr & MODE_MASK;
+
+ /*
+ * Always clear the R (REAL) bits
+ */
+ regs->UCreg_asr &= ~(PSR_R_BIT);
+
+ if ((regs->UCreg_asr & PSR_I_BIT) == 0) {
+ if (mode == USER_MODE)
+ return 1;
+ }
+
+ /*
+ * Force ASR to something logical...
+ */
+ regs->UCreg_asr &= PSR_f | USER_MODE;
+
+ return 0;
+}
+
+#define instruction_pointer(regs) ((regs)->UCreg_pc)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif
+
diff --git a/arch/unicore32/include/asm/sigcontext.h b/arch/unicore32/include/asm/sigcontext.h
new file mode 100644
index 00000000000..6a2d7671c05
--- /dev/null
+++ b/arch/unicore32/include/asm/sigcontext.h
@@ -0,0 +1,29 @@
+/*
+ * linux/arch/unicore32/include/asm/sigcontext.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_SIGCONTEXT_H__
+#define __UNICORE_SIGCONTEXT_H__
+
+#include <asm/ptrace.h>
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked. Note: only add new entries
+ * to the end of the structure.
+ */
+struct sigcontext {
+ unsigned long trap_no;
+ unsigned long error_code;
+ unsigned long oldmask;
+ unsigned long fault_address;
+ struct pt_regs regs;
+};
+
+#endif
diff --git a/arch/unicore32/include/asm/stacktrace.h b/arch/unicore32/include/asm/stacktrace.h
new file mode 100644
index 00000000000..76edc65a587
--- /dev/null
+++ b/arch/unicore32/include/asm/stacktrace.h
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/unicore32/include/asm/stacktrace.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_STACKTRACE_H__
+#define __UNICORE_STACKTRACE_H__
+
+struct stackframe {
+ unsigned long fp;
+ unsigned long sp;
+ unsigned long lr;
+ unsigned long pc;
+};
+
+#ifdef CONFIG_FRAME_POINTER
+extern int unwind_frame(struct stackframe *frame);
+#else
+#define unwind_frame(f) (-EINVAL)
+#endif
+extern void walk_stackframe(struct stackframe *frame,
+ int (*fn)(struct stackframe *, void *), void *data);
+
+#endif /* __UNICORE_STACKTRACE_H__ */
diff --git a/arch/unicore32/include/asm/string.h b/arch/unicore32/include/asm/string.h
new file mode 100644
index 00000000000..55264c84369
--- /dev/null
+++ b/arch/unicore32/include/asm/string.h
@@ -0,0 +1,38 @@
+/*
+ * linux/arch/unicore32/include/asm/string.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_STRING_H__
+#define __UNICORE_STRING_H__
+
+/*
+ * We don't do inline string functions, since the
+ * optimised inline asm versions are not small.
+ */
+
+#define __HAVE_ARCH_STRRCHR
+extern char *strrchr(const char *s, int c);
+
+#define __HAVE_ARCH_STRCHR
+extern char *strchr(const char *s, int c);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCHR
+extern void *memchr(const void *, int, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *, int, __kernel_size_t);
+
+#endif
diff --git a/arch/unicore32/include/asm/suspend.h b/arch/unicore32/include/asm/suspend.h
new file mode 100644
index 00000000000..88a9c0f32b2
--- /dev/null
+++ b/arch/unicore32/include/asm/suspend.h
@@ -0,0 +1,30 @@
+/*
+ * linux/arch/unicore32/include/asm/suspend.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_SUSPEND_H__
+#define __UNICORE_SUSPEND_H__
+
+#ifndef __ASSEMBLY__
+static inline int arch_prepare_suspend(void) { return 0; }
+
+#include <asm/ptrace.h>
+
+struct swsusp_arch_regs {
+ struct cpu_context_save cpu_context; /* cpu context */
+#ifdef CONFIG_UNICORE_FPU_F64
+ struct fp_state fpstate __attribute__((aligned(8)));
+#endif
+};
+#endif
+
+#endif /* __UNICORE_SUSPEND_H__ */
+
diff --git a/arch/unicore32/include/asm/system.h b/arch/unicore32/include/asm/system.h
new file mode 100644
index 00000000000..246b71c17fd
--- /dev/null
+++ b/arch/unicore32/include/asm/system.h
@@ -0,0 +1,161 @@
+/*
+ * linux/arch/unicore32/include/asm/system.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_SYSTEM_H__
+#define __UNICORE_SYSTEM_H__
+
+#ifdef __KERNEL__
+
+/*
+ * CR1 bits (CP#0 CR1)
+ */
+#define CR_M (1 << 0) /* MMU enable */
+#define CR_A (1 << 1) /* Alignment abort enable */
+#define CR_D (1 << 2) /* Dcache enable */
+#define CR_I (1 << 3) /* Icache enable */
+#define CR_B (1 << 4) /* Dcache write mechanism: write back */
+#define CR_T (1 << 5) /* Burst enable */
+#define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/irqflags.h>
+
+struct thread_info;
+struct task_struct;
+
+struct pt_regs;
+
+void die(const char *msg, struct pt_regs *regs, int err);
+
+struct siginfo;
+void uc32_notify_die(const char *str, struct pt_regs *regs,
+ struct siginfo *info, unsigned long err, unsigned long trap);
+
+void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
+ struct pt_regs *),
+ int sig, int code, const char *name);
+
+#define xchg(ptr, x) \
+ ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+
+extern asmlinkage void __backtrace(void);
+extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
+
+struct mm_struct;
+extern void show_pte(struct mm_struct *mm, unsigned long addr);
+extern void __show_regs(struct pt_regs *);
+
+extern int cpu_architecture(void);
+extern void cpu_init(void);
+
+#define vectors_high() (cr_alignment & CR_V)
+
+#define isb() __asm__ __volatile__ ("" : : : "memory")
+#define dsb() __asm__ __volatile__ ("" : : : "memory")
+#define dmb() __asm__ __volatile__ ("" : : : "memory")
+
+#define mb() barrier()
+#define rmb() barrier()
+#define wmb() barrier()
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define read_barrier_depends() do { } while (0)
+#define smp_read_barrier_depends() do { } while (0)
+
+#define set_mb(var, value) do { var = value; smp_mb(); } while (0)
+#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
+
+extern unsigned long cr_no_alignment; /* defined in entry-unicore.S */
+extern unsigned long cr_alignment; /* defined in entry-unicore.S */
+
+static inline unsigned int get_cr(void)
+{
+ unsigned int val;
+ asm("movc %0, p0.c1, #0" : "=r" (val) : : "cc");
+ return val;
+}
+
+static inline void set_cr(unsigned int val)
+{
+ asm volatile("movc p0.c1, %0, #0 @set CR"
+ : : "r" (val) : "cc");
+ isb();
+}
+
+extern void adjust_cr(unsigned long mask, unsigned long set);
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'. schedule() itself
+ * contains the memory barrier to tell GCC not to cache `current'.
+ */
+extern struct task_struct *__switch_to(struct task_struct *,
+ struct thread_info *, struct thread_info *);
+extern void panic(const char *fmt, ...);
+
+#define switch_to(prev, next, last) \
+do { \
+ last = __switch_to(prev, \
+ task_thread_info(prev), task_thread_info(next)); \
+} while (0)
+
+static inline unsigned long
+__xchg(unsigned long x, volatile void *ptr, int size)
+{
+ unsigned long ret;
+
+ switch (size) {
+ case 1:
+ asm volatile("@ __xchg1\n"
+ " swapb %0, %1, [%2]"
+ : "=&r" (ret)
+ : "r" (x), "r" (ptr)
+ : "memory", "cc");
+ break;
+ case 4:
+ asm volatile("@ __xchg4\n"
+ " swapw %0, %1, [%2]"
+ : "=&r" (ret)
+ : "r" (x), "r" (ptr)
+ : "memory", "cc");
+ break;
+ default:
+ panic("xchg: bad data size: ptr 0x%p, size %d\n",
+ ptr, size);
+ }
+
+ return ret;
+}
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), \
+ (unsigned long)(o), (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) \
+ __cmpxchg64_local_generic((ptr), (o), (n))
+
+#include <asm-generic/cmpxchg.h>
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/unicore32/include/asm/thread_info.h b/arch/unicore32/include/asm/thread_info.h
new file mode 100644
index 00000000000..c270e9e0486
--- /dev/null
+++ b/arch/unicore32/include/asm/thread_info.h
@@ -0,0 +1,154 @@
+/*
+ * linux/arch/unicore32/include/asm/thread_info.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_THREAD_INFO_H__
+#define __UNICORE_THREAD_INFO_H__
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <asm/fpstate.h>
+
+#define THREAD_SIZE_ORDER 1
+#define THREAD_SIZE 8192
+#define THREAD_START_SP (THREAD_SIZE - 8)
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+struct exec_domain;
+
+#include <asm/types.h>
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+struct cpu_context_save {
+ __u32 r4;
+ __u32 r5;
+ __u32 r6;
+ __u32 r7;
+ __u32 r8;
+ __u32 r9;
+ __u32 r10;
+ __u32 r11;
+ __u32 r12;
+ __u32 r13;
+ __u32 r14;
+ __u32 r15;
+ __u32 r16;
+ __u32 r17;
+ __u32 r18;
+ __u32 r19;
+ __u32 r20;
+ __u32 r21;
+ __u32 r22;
+ __u32 r23;
+ __u32 r24;
+ __u32 r25;
+ __u32 r26;
+ __u32 fp;
+ __u32 sp;
+ __u32 pc;
+};
+
+/*
+ * low level task data that entry.S needs immediate access to.
+ * __switch_to() assumes cpu_context follows immediately after cpu_domain.
+ */
+struct thread_info {
+ unsigned long flags; /* low level flags */
+ int preempt_count; /* 0 => preemptable */
+ /* <0 => bug */
+ mm_segment_t addr_limit; /* address limit */
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ __u32 cpu; /* cpu */
+ struct cpu_context_save cpu_context; /* cpu context */
+ __u32 syscall; /* syscall number */
+ __u8 used_cp[16]; /* thread used copro */
+#ifdef CONFIG_UNICORE_FPU_F64
+ struct fp_state fpstate __attribute__((aligned(8)));
+#endif
+ struct restart_block restart_block;
+};
+
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+/*
+ * how to get the thread information struct from C
+ */
+static inline struct thread_info *current_thread_info(void) __attribute_const__;
+
+static inline struct thread_info *current_thread_info(void)
+{
+ register unsigned long sp asm ("sp");
+ return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
+}
+
+#define thread_saved_pc(tsk) \
+ ((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
+#define thread_saved_sp(tsk) \
+ ((unsigned long)(task_thread_info(tsk)->cpu_context.sp))
+#define thread_saved_fp(tsk) \
+ ((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
+
+#endif
+
+/*
+ * We use bit 30 of the preempt_count to indicate that kernel
+ * preemption is occurring. See <asm/hardirq.h>.
+ */
+#define PREEMPT_ACTIVE 0x40000000
+
+/*
+ * thread information flags:
+ * TIF_SYSCALL_TRACE - syscall trace active
+ * TIF_SIGPENDING - signal pending
+ * TIF_NEED_RESCHED - rescheduling necessary
+ * TIF_NOTIFY_RESUME - callback before returning to user
+ */
+#define TIF_SIGPENDING 0
+#define TIF_NEED_RESCHED 1
+#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */
+#define TIF_SYSCALL_TRACE 8
+#define TIF_MEMDIE 18
+#define TIF_FREEZE 19
+#define TIF_RESTORE_SIGMASK 20
+
+#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
+#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_FREEZE (1 << TIF_FREEZE)
+#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
+
+/*
+ * Change these and you break ASM code in entry-common.S
+ */
+#define _TIF_WORK_MASK 0x000000ff
+
+#endif /* __KERNEL__ */
+#endif /* __UNICORE_THREAD_INFO_H__ */
diff --git a/arch/unicore32/include/asm/timex.h b/arch/unicore32/include/asm/timex.h
new file mode 100644
index 00000000000..faf16ba4654
--- /dev/null
+++ b/arch/unicore32/include/asm/timex.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/unicore32/include/asm/timex.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_TIMEX_H__
+#define __UNICORE_TIMEX_H__
+
+#ifdef CONFIG_ARCH_FPGA
+
+/* in FPGA, APB clock is 33M, and OST clock is 32K, */
+/* so, 1M is selected for timer interrupt correctly */
+#define CLOCK_TICK_RATE (32*1024)
+
+#endif
+
+#if defined(CONFIG_PUV3_DB0913) \
+ || defined(CONFIG_PUV3_NB0916) \
+ || defined(CONFIG_PUV3_SMW0919)
+
+#define CLOCK_TICK_RATE (14318000)
+
+#endif
+
+#include <asm-generic/timex.h>
+
+#endif
diff --git a/arch/unicore32/include/asm/tlb.h b/arch/unicore32/include/asm/tlb.h
new file mode 100644
index 00000000000..9cca15cdae9
--- /dev/null
+++ b/arch/unicore32/include/asm/tlb.h
@@ -0,0 +1,28 @@
+/*
+ * linux/arch/unicore32/include/asm/tlb.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_TLB_H__
+#define __UNICORE_TLB_H__
+
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#define __pte_free_tlb(tlb, pte, addr) \
+ do { \
+ pgtable_page_dtor(pte); \
+ tlb_remove_page((tlb), (pte)); \
+ } while (0)
+
+#include <asm-generic/tlb.h>
+
+#endif
diff --git a/arch/unicore32/include/asm/tlbflush.h b/arch/unicore32/include/asm/tlbflush.h
new file mode 100644
index 00000000000..e446ac8bb9e
--- /dev/null
+++ b/arch/unicore32/include/asm/tlbflush.h
@@ -0,0 +1,195 @@
+/*
+ * linux/arch/unicore32/include/asm/tlbflush.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_TLBFLUSH_H__
+#define __UNICORE_TLBFLUSH_H__
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+
+extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long,
+ struct vm_area_struct *);
+extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
+
+/*
+ * TLB Management
+ * ==============
+ *
+ * The arch/unicore/mm/tlb-*.S files implement these methods.
+ *
+ * The TLB specific code is expected to perform whatever tests it
+ * needs to determine if it should invalidate the TLB for each
+ * call. Start addresses are inclusive and end addresses are
+ * exclusive; it is safe to round these addresses down.
+ *
+ * flush_tlb_all()
+ *
+ * Invalidate the entire TLB.
+ *
+ * flush_tlb_mm(mm)
+ *
+ * Invalidate all TLB entries in a particular address
+ * space.
+ * - mm - mm_struct describing address space
+ *
+ * flush_tlb_range(mm,start,end)
+ *
+ * Invalidate a range of TLB entries in the specified
+ * address space.
+ * - mm - mm_struct describing address space
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ *
+ * flush_tlb_page(vaddr,vma)
+ *
+ * Invalidate the specified page in the specified address range.
+ * - vaddr - virtual address (may not be aligned)
+ * - vma - vma_struct describing address range
+ *
+ * flush_kern_tlb_page(kaddr)
+ *
+ * Invalidate the TLB entry for the specified page. The address
+ * will be in the kernels virtual memory space. Current uses
+ * only require the D-TLB to be invalidated.
+ * - kaddr - Kernel virtual memory address
+ */
+
+static inline void local_flush_tlb_all(void)
+{
+ const int zero = 0;
+
+ /* TLB invalidate all */
+ asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
+ : : "r" (zero) : "cc");
+}
+
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+{
+ const int zero = 0;
+
+ if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
+ /* TLB invalidate all */
+ asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
+ : : "r" (zero) : "cc");
+ }
+ put_cpu();
+}
+
+static inline void
+local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
+ /* iTLB invalidate page */
+ asm("movc p0.c6, %0, #5; nop; nop; nop; nop; nop; nop; nop; nop"
+ : : "r" (uaddr & PAGE_MASK) : "cc");
+ /* dTLB invalidate page */
+ asm("movc p0.c6, %0, #3; nop; nop; nop; nop; nop; nop; nop; nop"
+ : : "r" (uaddr & PAGE_MASK) : "cc");
+#else
+ /* TLB invalidate all */
+ asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
+ : : "r" (uaddr & PAGE_MASK) : "cc");
+#endif
+ }
+}
+
+static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
+{
+#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
+ /* iTLB invalidate page */
+ asm("movc p0.c6, %0, #5; nop; nop; nop; nop; nop; nop; nop; nop"
+ : : "r" (kaddr & PAGE_MASK) : "cc");
+ /* dTLB invalidate page */
+ asm("movc p0.c6, %0, #3; nop; nop; nop; nop; nop; nop; nop; nop"
+ : : "r" (kaddr & PAGE_MASK) : "cc");
+#else
+ /* TLB invalidate all */
+ asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
+ : : "r" (kaddr & PAGE_MASK) : "cc");
+#endif
+}
+
+/*
+ * flush_pmd_entry
+ *
+ * Flush a PMD entry (word aligned, or double-word aligned) to
+ * RAM if the TLB for the CPU we are running on requires this.
+ * This is typically used when we are creating PMD entries.
+ *
+ * clean_pmd_entry
+ *
+ * Clean (but don't drain the write buffer) if the CPU requires
+ * these operations. This is typically used when we are removing
+ * PMD entries.
+ */
+static inline void flush_pmd_entry(pmd_t *pmd)
+{
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+ /* flush dcache line, see dcacheline_flush in proc-macros.S */
+ asm("mov r1, %0 << #20\n"
+ "ldw r2, =_stext\n"
+ "add r2, r2, r1 >> #20\n"
+ "ldw r1, [r2+], #0x0000\n"
+ "ldw r1, [r2+], #0x1000\n"
+ "ldw r1, [r2+], #0x2000\n"
+ "ldw r1, [r2+], #0x3000\n"
+ : : "r" (pmd) : "r1", "r2");
+#else
+ /* flush dcache all */
+ asm("movc p0.c5, %0, #14; nop; nop; nop; nop; nop; nop; nop; nop"
+ : : "r" (pmd) : "cc");
+#endif
+}
+
+static inline void clean_pmd_entry(pmd_t *pmd)
+{
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+ /* clean dcache line */
+ asm("movc p0.c5, %0, #11; nop; nop; nop; nop; nop; nop; nop; nop"
+ : : "r" (__pa(pmd) & ~(L1_CACHE_BYTES - 1)) : "cc");
+#else
+ /* clean dcache all */
+ asm("movc p0.c5, %0, #10; nop; nop; nop; nop; nop; nop; nop; nop"
+ : : "r" (pmd) : "cc");
+#endif
+}
+
+/*
+ * Convert calls to our calling convention.
+ */
+#define local_flush_tlb_range(vma, start, end) \
+ __cpu_flush_user_tlb_range(start, end, vma)
+#define local_flush_tlb_kernel_range(s, e) \
+ __cpu_flush_kern_tlb_range(s, e)
+
+#define flush_tlb_all local_flush_tlb_all
+#define flush_tlb_mm local_flush_tlb_mm
+#define flush_tlb_page local_flush_tlb_page
+#define flush_tlb_kernel_page local_flush_tlb_kernel_page
+#define flush_tlb_range local_flush_tlb_range
+#define flush_tlb_kernel_range local_flush_tlb_kernel_range
+
+/*
+ * if PG_dcache_clean is not set for the page, we need to ensure that any
+ * cache entries for the kernels virtual memory range are written
+ * back to the page.
+ */
+extern void update_mmu_cache(struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep);
+
+extern void do_bad_area(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs);
+
+#endif
+
+#endif
diff --git a/arch/unicore32/include/asm/traps.h b/arch/unicore32/include/asm/traps.h
new file mode 100644
index 00000000000..66e17a724bf
--- /dev/null
+++ b/arch/unicore32/include/asm/traps.h
@@ -0,0 +1,21 @@
+/*
+ * linux/arch/unicore32/include/asm/traps.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_TRAP_H__
+#define __UNICORE_TRAP_H__
+
+extern void __init early_trap_init(void);
+extern void dump_backtrace_entry(unsigned long where,
+ unsigned long from, unsigned long frame);
+
+extern void do_DataAbort(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs);
+#endif
diff --git a/arch/unicore32/include/asm/uaccess.h b/arch/unicore32/include/asm/uaccess.h
new file mode 100644
index 00000000000..2acda503a6d
--- /dev/null
+++ b/arch/unicore32/include/asm/uaccess.h
@@ -0,0 +1,47 @@
+/*
+ * linux/arch/unicore32/include/asm/uaccess.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_UACCESS_H__
+#define __UNICORE_UACCESS_H__
+
+#include <linux/thread_info.h>
+#include <linux/errno.h>
+
+#include <asm/memory.h>
+#include <asm/system.h>
+
+#define __copy_from_user __copy_from_user
+#define __copy_to_user __copy_to_user
+#define __strncpy_from_user __strncpy_from_user
+#define __strnlen_user __strnlen_user
+#define __clear_user __clear_user
+
+#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
+#define __user_ok(addr, size) (((size) <= TASK_SIZE) \
+ && ((addr) <= TASK_SIZE - (size)))
+#define __access_ok(addr, size) (__kernel_ok || __user_ok((addr), (size)))
+
+extern unsigned long __must_check
+__copy_from_user(void *to, const void __user *from, unsigned long n);
+extern unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __must_check
+__clear_user(void __user *addr, unsigned long n);
+extern unsigned long __must_check
+__strncpy_from_user(char *to, const char __user *from, unsigned long count);
+extern unsigned long
+__strnlen_user(const char __user *s, long n);
+
+#include <asm-generic/uaccess.h>
+
+extern int fixup_exception(struct pt_regs *regs);
+
+#endif /* __UNICORE_UACCESS_H__ */
diff --git a/arch/unicore32/include/asm/unistd.h b/arch/unicore32/include/asm/unistd.h
new file mode 100644
index 00000000000..9b242801996
--- /dev/null
+++ b/arch/unicore32/include/asm/unistd.h
@@ -0,0 +1,18 @@
+/*
+ * linux/arch/unicore32/include/asm/unistd.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#if !defined(__UNICORE_UNISTD_H__) || defined(__SYSCALL)
+#define __UNICORE_UNISTD_H__
+
+/* Use the standard ABI for syscalls. */
+#include <asm-generic/unistd.h>
+
+#endif /* __UNICORE_UNISTD_H__ */
diff --git a/arch/unicore32/include/mach/PKUnity.h b/arch/unicore32/include/mach/PKUnity.h
new file mode 100644
index 00000000000..a18bdc3810e
--- /dev/null
+++ b/arch/unicore32/include/mach/PKUnity.h
@@ -0,0 +1,108 @@
+/*
+ * linux/arch/unicore32/include/mach/PKUnity.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* Be sure that virtual mapping is defined right */
+#ifndef __MACH_PUV3_HARDWARE_H__
+#error You must include hardware.h not PKUnity.h
+#endif
+
+#include "bitfield.h"
+
+/*
+ * Memory Definitions
+ */
+#define PKUNITY_SDRAM_BASE 0x00000000 /* 0x00000000 - 0x7FFFFFFF 2GB */
+#define PKUNITY_MMIO_BASE 0x80000000 /* 0x80000000 - 0xFFFFFFFF 2GB */
+
+/*
+ * PKUNITY Memory Map Addresses: 0x0D000000 - 0x0EFFFFFF (32MB)
+ * 0x0D000000 - 0x0DFFFFFF 16MB: for UVC
+ * 0x0E000000 - 0x0EFFFFFF 16MB: for UNIGFX
+ */
+#define PKUNITY_UVC_MMAP_BASE 0x0D000000
+#define PKUNITY_UVC_MMAP_SIZE 0x01000000 /* 16MB */
+#define PKUNITY_UNIGFX_MMAP_BASE 0x0E000000
+#define PKUNITY_UNIGFX_MMAP_SIZE 0x01000000 /* 16MB */
+
+/*
+ * PKUNITY System Bus Addresses (PCI): 0x80000000 - 0xBFFFFFFF (1GB)
+ * 0x80000000 - 0x8000000B 12B PCI Configuration regs
+ * 0x80010000 - 0x80010250 592B PCI Bridge Base
+ * 0x80030000 - 0x8003FFFF 64KB PCI Legacy IO
+ * 0x90000000 - 0x97FFFFFF 128MB PCI AHB-PCI MEM-mapping
+ * 0x98000000 - 0x9FFFFFFF 128MB PCI PCI-AHB MEM-mapping
+ */
+#define PKUNITY_PCI_BASE io_p2v(0x80000000) /* 0x80000000 - 0xBFFFFFFF 1GB */
+#include "regs-pci.h"
+
+#define PKUNITY_PCICFG_BASE (PKUNITY_PCI_BASE + 0x0)
+#define PKUNITY_PCIBRI_BASE (PKUNITY_PCI_BASE + 0x00010000)
+#define PKUNITY_PCILIO_BASE (PKUNITY_PCI_BASE + 0x00030000)
+#define PKUNITY_PCIMEM_BASE (PKUNITY_PCI_BASE + 0x10000000)
+#define PKUNITY_PCIAHB_BASE (PKUNITY_PCI_BASE + 0x18000000)
+
+/*
+ * PKUNITY System Bus Addresses (AHB): 0xC0000000 - 0xEDFFFFFF (640MB)
+ */
+#define PKUNITY_AHB_BASE io_p2v(0xC0000000)
+
+/* AHB-0 is DDR2 SDRAM */
+/* AHB-1 is PCI Space */
+#define PKUNITY_ARBITER_BASE (PKUNITY_AHB_BASE + 0x000000) /* AHB-2 */
+#define PKUNITY_DDR2CTRL_BASE (PKUNITY_AHB_BASE + 0x100000) /* AHB-3 */
+#define PKUNITY_DMAC_BASE (PKUNITY_AHB_BASE + 0x200000) /* AHB-4 */
+#include "regs-dmac.h"
+#define PKUNITY_UMAL_BASE (PKUNITY_AHB_BASE + 0x300000) /* AHB-5 */
+#include "regs-umal.h"
+#define PKUNITY_USB_BASE (PKUNITY_AHB_BASE + 0x400000) /* AHB-6 */
+#define PKUNITY_SATA_BASE (PKUNITY_AHB_BASE + 0x500000) /* AHB-7 */
+#define PKUNITY_SMC_BASE (PKUNITY_AHB_BASE + 0x600000) /* AHB-8 */
+/* AHB-9 is for APB bridge */
+#define PKUNITY_MME_BASE (PKUNITY_AHB_BASE + 0x700000) /* AHB-10 */
+#define PKUNITY_UNIGFX_BASE (PKUNITY_AHB_BASE + 0x800000) /* AHB-11 */
+#include "regs-unigfx.h"
+#define PKUNITY_NAND_BASE (PKUNITY_AHB_BASE + 0x900000) /* AHB-12 */
+#include "regs-nand.h"
+#define PKUNITY_H264D_BASE (PKUNITY_AHB_BASE + 0xA00000) /* AHB-13 */
+#define PKUNITY_H264E_BASE (PKUNITY_AHB_BASE + 0xB00000) /* AHB-14 */
+
+/*
+ * PKUNITY Peripheral Bus Addresses (APB): 0xEE000000 - 0xEFFFFFFF (128MB)
+ */
+#define PKUNITY_APB_BASE io_p2v(0xEE000000)
+
+#define PKUNITY_UART0_BASE (PKUNITY_APB_BASE + 0x000000) /* APB-0 */
+#define PKUNITY_UART1_BASE (PKUNITY_APB_BASE + 0x100000) /* APB-1 */
+#include "regs-uart.h"
+#define PKUNITY_I2C_BASE (PKUNITY_APB_BASE + 0x200000) /* APB-2 */
+#include "regs-i2c.h"
+#define PKUNITY_SPI_BASE (PKUNITY_APB_BASE + 0x300000) /* APB-3 */
+#include "regs-spi.h"
+#define PKUNITY_AC97_BASE (PKUNITY_APB_BASE + 0x400000) /* APB-4 */
+#include "regs-ac97.h"
+#define PKUNITY_GPIO_BASE (PKUNITY_APB_BASE + 0x500000) /* APB-5 */
+#include "regs-gpio.h"
+#define PKUNITY_INTC_BASE (PKUNITY_APB_BASE + 0x600000) /* APB-6 */
+#include "regs-intc.h"
+#define PKUNITY_RTC_BASE (PKUNITY_APB_BASE + 0x700000) /* APB-7 */
+#include "regs-rtc.h"
+#define PKUNITY_OST_BASE (PKUNITY_APB_BASE + 0x800000) /* APB-8 */
+#include "regs-ost.h"
+#define PKUNITY_RESETC_BASE (PKUNITY_APB_BASE + 0x900000) /* APB-9 */
+#include "regs-resetc.h"
+#define PKUNITY_PM_BASE (PKUNITY_APB_BASE + 0xA00000) /* APB-10 */
+#include "regs-pm.h"
+#define PKUNITY_PS2_BASE (PKUNITY_APB_BASE + 0xB00000) /* APB-11 */
+#include "regs-ps2.h"
+#define PKUNITY_SDC_BASE (PKUNITY_APB_BASE + 0xC00000) /* APB-12 */
+#include "regs-sdc.h"
+
diff --git a/arch/unicore32/include/mach/bitfield.h b/arch/unicore32/include/mach/bitfield.h
new file mode 100644
index 00000000000..128a70281ef
--- /dev/null
+++ b/arch/unicore32/include/mach/bitfield.h
@@ -0,0 +1,24 @@
+/*
+ * linux/arch/unicore32/include/mach/bitfield.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_PUV3_BITFIELD_H__
+#define __MACH_PUV3_BITFIELD_H__
+
+#ifndef __ASSEMBLY__
+#define UData(Data) ((unsigned long) (Data))
+#else
+#define UData(Data) (Data)
+#endif
+
+#define FIELD(val, vmask, vshift) (((val) & ((UData(1) << (vmask)) - 1)) << (vshift))
+#define FMASK(vmask, vshift) (((UData(1) << (vmask)) - 1) << (vshift))
+
+#endif /* __MACH_PUV3_BITFIELD_H__ */
diff --git a/arch/unicore32/include/mach/dma.h b/arch/unicore32/include/mach/dma.h
new file mode 100644
index 00000000000..d655c1b6e08
--- /dev/null
+++ b/arch/unicore32/include/mach/dma.h
@@ -0,0 +1,48 @@
+/*
+ * linux/arch/unicore32/include/mach/dma.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_PUV3_DMA_H__
+#define __MACH_PUV3_DMA_H__
+
+/*
+ * The PKUnity has six internal DMA channels.
+ */
+#define MAX_DMA_CHANNELS 6
+
+typedef enum {
+ DMA_PRIO_HIGH = 0,
+ DMA_PRIO_MEDIUM = 1,
+ DMA_PRIO_LOW = 2
+} puv3_dma_prio;
+
+/*
+ * DMA registration
+ */
+
+extern int puv3_request_dma(char *name,
+ puv3_dma_prio prio,
+ void (*irq_handler)(int, void *),
+ void (*err_handler)(int, void *),
+ void *data);
+
+extern void puv3_free_dma(int dma_ch);
+
+static inline void puv3_stop_dma(int ch)
+{
+ writel(readl(DMAC_CONFIG(ch)) & ~DMAC_CONFIG_EN, DMAC_CONFIG(ch));
+}
+
+static inline void puv3_resume_dma(int ch)
+{
+ writel(readl(DMAC_CONFIG(ch)) | DMAC_CONFIG_EN, DMAC_CONFIG(ch));
+}
+
+#endif /* __MACH_PUV3_DMA_H__ */
diff --git a/arch/unicore32/include/mach/hardware.h b/arch/unicore32/include/mach/hardware.h
new file mode 100644
index 00000000000..930bea6e129
--- /dev/null
+++ b/arch/unicore32/include/mach/hardware.h
@@ -0,0 +1,38 @@
+/*
+ * linux/arch/unicore32/include/mach/hardware.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the hardware definitions for PKUnity architecture
+ */
+
+#ifndef __MACH_PUV3_HARDWARE_H__
+#define __MACH_PUV3_HARDWARE_H__
+
+#include "PKUnity.h"
+
+#ifndef __ASSEMBLY__
+#define io_p2v(x) (void __iomem *)((x) - PKUNITY_MMIO_BASE)
+#define io_v2p(x) (phys_addr_t)((x) + PKUNITY_MMIO_BASE)
+#else
+#define io_p2v(x) ((x) - PKUNITY_MMIO_BASE)
+#define io_v2p(x) ((x) + PKUNITY_MMIO_BASE)
+#endif
+
+#define PCIBIOS_MIN_IO 0x4000 /* should lower than 64KB */
+#define PCIBIOS_MIN_MEM io_v2p(PKUNITY_PCIMEM_BASE)
+
+/*
+ * We override the standard dma-mask routines for bouncing.
+ */
+#define HAVE_ARCH_PCI_SET_DMA_MASK
+
+#define pcibios_assign_all_busses() 1
+
+#endif /* __MACH_PUV3_HARDWARE_H__ */
diff --git a/arch/unicore32/include/mach/map.h b/arch/unicore32/include/mach/map.h
new file mode 100644
index 00000000000..55c93657374
--- /dev/null
+++ b/arch/unicore32/include/mach/map.h
@@ -0,0 +1,20 @@
+/*
+ * linux/arch/unicore32/include/mach/map.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Page table mapping constructs and function prototypes
+ */
+#define MT_DEVICE 0
+#define MT_DEVICE_CACHED 2
+#define MT_KUSER 7
+#define MT_HIGH_VECTORS 8
+#define MT_MEMORY 9
+#define MT_ROM 10
+
diff --git a/arch/unicore32/include/mach/memory.h b/arch/unicore32/include/mach/memory.h
new file mode 100644
index 00000000000..0bf21c94471
--- /dev/null
+++ b/arch/unicore32/include/mach/memory.h
@@ -0,0 +1,58 @@
+/*
+ * linux/arch/unicore32/include/mach/memory.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_PUV3_MEMORY_H__
+#define __MACH_PUV3_MEMORY_H__
+
+#include <mach/hardware.h>
+
+/* Physical DRAM offset. */
+#define PHYS_OFFSET UL(0x00000000)
+/* The base address of exception vectors. */
+#define VECTORS_BASE UL(0xffff0000)
+/* The base address of kuser area. */
+#define KUSER_BASE UL(0x80000000)
+
+#ifdef __ASSEMBLY__
+/* The byte offset of the kernel image in RAM from the start of RAM. */
+#define KERNEL_IMAGE_START 0x00408000
+#endif
+
+#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
+
+void puv3_pci_adjust_zones(unsigned long *size, unsigned long *holes);
+
+#define arch_adjust_zones(size, holes) \
+ puv3_pci_adjust_zones(size, holes)
+
+#endif
+
+/*
+ * PCI controller in PKUnity-3 masks highest 5-bit for upstream channel,
+ * so we must limit the DMA allocation within 128M physical memory for
+ * supporting PCI devices.
+ */
+#define PCI_DMA_THRESHOLD (PHYS_OFFSET + SZ_128M - 1)
+
+#define is_pcibus_device(dev) (dev && \
+ (strncmp(dev->bus->name, "pci", 3) == 0))
+
+#define __virt_to_pcibus(x) (__virt_to_phys((x) + PKUNITY_PCIAHB_BASE))
+#define __pcibus_to_virt(x) (__phys_to_virt(x) - PKUNITY_PCIAHB_BASE)
+
+/* kuser area */
+#define KUSER_VECPAGE_BASE (KUSER_BASE + UL(0x3fff0000))
+#define KUSER_UNIGFX_BASE (PAGE_OFFSET + PKUNITY_UNIGFX_MMAP_BASE)
+/* kuser_vecpage (0xbfff0000) is ro, and vectors page (0xffff0000) is rw */
+#define kuser_vecpage_to_vectors(x) ((x) - (KUSER_VECPAGE_BASE) \
+ + (VECTORS_BASE))
+
+#endif
diff --git a/arch/unicore32/include/mach/ocd.h b/arch/unicore32/include/mach/ocd.h
new file mode 100644
index 00000000000..189fd71bfa3
--- /dev/null
+++ b/arch/unicore32/include/mach/ocd.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/unicore32/include/mach/ocd.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_PUV3_OCD_H__
+#define __MACH_PUV3_OCD_H__
+
+#if defined(CONFIG_DEBUG_OCD)
+static inline void ocd_putc(unsigned int c)
+{
+ int status, i = 0x2000000;
+
+ do {
+ if (--i < 0)
+ return;
+
+ asm volatile ("movc %0, p1.c0, #0" : "=r" (status));
+ } while (status & 2);
+
+ asm("movc p1.c1, %0, #1" : : "r" (c));
+}
+
+#define putc(ch) ocd_putc(ch)
+#else
+#define putc(ch)
+#endif
+
+#endif
diff --git a/arch/unicore32/include/mach/pm.h b/arch/unicore32/include/mach/pm.h
new file mode 100644
index 00000000000..4dcd34ae194
--- /dev/null
+++ b/arch/unicore32/include/mach/pm.h
@@ -0,0 +1,43 @@
+/*
+ * linux/arch/unicore/include/mach/pm.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PUV3_PM_H__
+#define __PUV3_PM_H__
+
+#include <linux/suspend.h>
+
+struct puv3_cpu_pm_fns {
+ int save_count;
+ void (*save)(unsigned long *);
+ void (*restore)(unsigned long *);
+ int (*valid)(suspend_state_t state);
+ void (*enter)(suspend_state_t state);
+ int (*prepare)(void);
+ void (*finish)(void);
+};
+
+extern struct puv3_cpu_pm_fns *puv3_cpu_pm_fns;
+
+/* sleep.S */
+extern void puv3_cpu_suspend(unsigned int);
+
+extern void puv3_cpu_resume(void);
+
+extern int puv3_pm_enter(suspend_state_t state);
+
+/* Defined in hibernate_asm.S */
+extern int restore_image(pgd_t *resume_pg_dir, struct pbe *restore_pblist);
+
+/* References to section boundaries */
+extern const void __nosave_begin, __nosave_end;
+
+extern struct pbe *restore_pblist;
+#endif
diff --git a/arch/unicore32/include/mach/regs-ac97.h b/arch/unicore32/include/mach/regs-ac97.h
new file mode 100644
index 00000000000..b7563e9d650
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-ac97.h
@@ -0,0 +1,32 @@
+/*
+ * PKUnity AC97 Registers
+ */
+
+#define PKUNITY_AC97_CONR (PKUNITY_AC97_BASE + 0x0000)
+#define PKUNITY_AC97_OCR (PKUNITY_AC97_BASE + 0x0004)
+#define PKUNITY_AC97_ICR (PKUNITY_AC97_BASE + 0x0008)
+#define PKUNITY_AC97_CRAC (PKUNITY_AC97_BASE + 0x000C)
+#define PKUNITY_AC97_INTR (PKUNITY_AC97_BASE + 0x0010)
+#define PKUNITY_AC97_INTRSTAT (PKUNITY_AC97_BASE + 0x0014)
+#define PKUNITY_AC97_INTRCLEAR (PKUNITY_AC97_BASE + 0x0018)
+#define PKUNITY_AC97_ENABLE (PKUNITY_AC97_BASE + 0x001C)
+#define PKUNITY_AC97_OUT_FIFO (PKUNITY_AC97_BASE + 0x0020)
+#define PKUNITY_AC97_IN_FIFO (PKUNITY_AC97_BASE + 0x0030)
+
+#define AC97_CODEC_REG(v) FIELD((v), 7, 16)
+#define AC97_CODEC_VAL(v) FIELD((v), 16, 0)
+#define AC97_CODEC_WRITECOMPLETE FIELD(1, 1, 2)
+
+/*
+ * VAR PLAY SAMPLE RATE
+ */
+#define AC97_CMD_VPSAMPLE (FIELD(3, 2, 16) | FIELD(3, 2, 0))
+
+/*
+ * FIX CAPTURE SAMPLE RATE
+ */
+#define AC97_CMD_FCSAMPLE FIELD(7, 3, 0)
+
+#define AC97_CMD_RESET FIELD(1, 1, 0)
+#define AC97_CMD_ENABLE FIELD(1, 1, 0)
+#define AC97_CMD_DISABLE FIELD(0, 1, 0)
diff --git a/arch/unicore32/include/mach/regs-dmac.h b/arch/unicore32/include/mach/regs-dmac.h
new file mode 100644
index 00000000000..66de9e7d1c8
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-dmac.h
@@ -0,0 +1,81 @@
+/*
+ * PKUnity Direct Memory Access Controller (DMAC)
+ */
+
+/*
+ * Interrupt Status Reg DMAC_ISR.
+ */
+#define DMAC_ISR (PKUNITY_DMAC_BASE + 0x0020)
+/*
+ * Interrupt Transfer Complete Status Reg DMAC_ITCSR.
+ */
+#define DMAC_ITCSR (PKUNITY_DMAC_BASE + 0x0050)
+/*
+ * Interrupt Transfer Complete Clear Reg DMAC_ITCCR.
+ */
+#define DMAC_ITCCR (PKUNITY_DMAC_BASE + 0x0060)
+/*
+ * Interrupt Error Status Reg DMAC_IESR.
+ */
+#define DMAC_IESR (PKUNITY_DMAC_BASE + 0x0080)
+/*
+ * Interrupt Error Clear Reg DMAC_IECR.
+ */
+#define DMAC_IECR (PKUNITY_DMAC_BASE + 0x0090)
+/*
+ * Enable Channels Reg DMAC_ENCH.
+ */
+#define DMAC_ENCH (PKUNITY_DMAC_BASE + 0x00B0)
+
+/*
+ * DMA control reg. Space [byte]
+ */
+#define DMASp 0x00000100
+
+/*
+ * Source Addr DMAC_SRCADDR(ch).
+ */
+#define DMAC_SRCADDR(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x00)
+/*
+ * Destination Addr DMAC_DESTADDR(ch).
+ */
+#define DMAC_DESTADDR(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x04)
+/*
+ * Control Reg DMAC_CONTROL(ch).
+ */
+#define DMAC_CONTROL(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x0C)
+/*
+ * Configuration Reg DMAC_CONFIG(ch).
+ */
+#define DMAC_CONFIG(ch) (PKUNITY_DMAC_BASE + (ch)*DMASp + 0x10)
+
+#define DMAC_IR_MASK FMASK(6, 0)
+/*
+ * select channel (ch)
+ */
+#define DMAC_CHANNEL(ch) FIELD(1, 1, (ch))
+
+#define DMAC_CONTROL_SIZE_BYTE(v) (FIELD((v), 12, 14) | \
+ FIELD(0, 3, 9) | FIELD(0, 3, 6))
+#define DMAC_CONTROL_SIZE_HWORD(v) (FIELD((v) >> 1, 12, 14) | \
+ FIELD(1, 3, 9) | FIELD(1, 3, 6))
+#define DMAC_CONTROL_SIZE_WORD(v) (FIELD((v) >> 2, 12, 14) | \
+ FIELD(2, 3, 9) | FIELD(2, 3, 6))
+#define DMAC_CONTROL_DI FIELD(1, 1, 13)
+#define DMAC_CONTROL_SI FIELD(1, 1, 12)
+#define DMAC_CONTROL_BURST_1BYTE (FIELD(0, 3, 3) | FIELD(0, 3, 0))
+#define DMAC_CONTROL_BURST_4BYTE (FIELD(3, 3, 3) | FIELD(3, 3, 0))
+#define DMAC_CONTROL_BURST_8BYTE (FIELD(5, 3, 3) | FIELD(5, 3, 0))
+#define DMAC_CONTROL_BURST_16BYTE (FIELD(7, 3, 3) | FIELD(7, 3, 0))
+
+#define DMAC_CONFIG_UART0_WR (FIELD(2, 4, 11) | FIELD(1, 2, 1))
+#define DMAC_CONFIG_UART0_RD (FIELD(2, 4, 7) | FIELD(2, 2, 1))
+#define DMAC_CONFIG_UART1_WR (FIELD(3, 4, 11) | FIELD(1, 2, 1))
+#define DMAC_CONFIG_UART1RD (FIELD(3, 4, 7) | FIELD(2, 2, 1))
+#define DMAC_CONFIG_AC97WR (FIELD(4, 4, 11) | FIELD(1, 2, 1))
+#define DMAC_CONFIG_AC97RD (FIELD(4, 4, 7) | FIELD(2, 2, 1))
+#define DMAC_CONFIG_MMCWR (FIELD(7, 4, 11) | FIELD(1, 2, 1))
+#define DMAC_CONFIG_MMCRD (FIELD(7, 4, 7) | FIELD(2, 2, 1))
+#define DMAC_CONFIG_MASKITC FIELD(1, 1, 4)
+#define DMAC_CONFIG_MASKIE FIELD(1, 1, 3)
+#define DMAC_CONFIG_EN FIELD(1, 1, 0)
diff --git a/arch/unicore32/include/mach/regs-gpio.h b/arch/unicore32/include/mach/regs-gpio.h
new file mode 100644
index 00000000000..0273b861ef9
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-gpio.h
@@ -0,0 +1,70 @@
+/*
+ * PKUnity General-Purpose Input/Output (GPIO) Registers
+ */
+
+/*
+ * Voltage Status Reg GPIO_GPLR.
+ */
+#define GPIO_GPLR (PKUNITY_GPIO_BASE + 0x0000)
+/*
+ * Pin Direction Reg GPIO_GPDR.
+ */
+#define GPIO_GPDR (PKUNITY_GPIO_BASE + 0x0004)
+/*
+ * Output Pin Set Reg GPIO_GPSR.
+ */
+#define GPIO_GPSR (PKUNITY_GPIO_BASE + 0x0008)
+/*
+ * Output Pin Clear Reg GPIO_GPCR.
+ */
+#define GPIO_GPCR (PKUNITY_GPIO_BASE + 0x000C)
+/*
+ * Raise Edge Detect Reg GPIO_GRER.
+ */
+#define GPIO_GRER (PKUNITY_GPIO_BASE + 0x0010)
+/*
+ * Fall Edge Detect Reg GPIO_GFER.
+ */
+#define GPIO_GFER (PKUNITY_GPIO_BASE + 0x0014)
+/*
+ * Edge Status Reg GPIO_GEDR.
+ */
+#define GPIO_GEDR (PKUNITY_GPIO_BASE + 0x0018)
+/*
+ * Sepcial Voltage Detect Reg GPIO_GPIR.
+ */
+#define GPIO_GPIR (PKUNITY_GPIO_BASE + 0x0020)
+
+#define GPIO_MIN (0)
+#define GPIO_MAX (27)
+
+#define GPIO_GPIO(Nb) (0x00000001 << (Nb)) /* GPIO [0..27] */
+#define GPIO_GPIO0 GPIO_GPIO(0) /* GPIO [0] */
+#define GPIO_GPIO1 GPIO_GPIO(1) /* GPIO [1] */
+#define GPIO_GPIO2 GPIO_GPIO(2) /* GPIO [2] */
+#define GPIO_GPIO3 GPIO_GPIO(3) /* GPIO [3] */
+#define GPIO_GPIO4 GPIO_GPIO(4) /* GPIO [4] */
+#define GPIO_GPIO5 GPIO_GPIO(5) /* GPIO [5] */
+#define GPIO_GPIO6 GPIO_GPIO(6) /* GPIO [6] */
+#define GPIO_GPIO7 GPIO_GPIO(7) /* GPIO [7] */
+#define GPIO_GPIO8 GPIO_GPIO(8) /* GPIO [8] */
+#define GPIO_GPIO9 GPIO_GPIO(9) /* GPIO [9] */
+#define GPIO_GPIO10 GPIO_GPIO(10) /* GPIO [10] */
+#define GPIO_GPIO11 GPIO_GPIO(11) /* GPIO [11] */
+#define GPIO_GPIO12 GPIO_GPIO(12) /* GPIO [12] */
+#define GPIO_GPIO13 GPIO_GPIO(13) /* GPIO [13] */
+#define GPIO_GPIO14 GPIO_GPIO(14) /* GPIO [14] */
+#define GPIO_GPIO15 GPIO_GPIO(15) /* GPIO [15] */
+#define GPIO_GPIO16 GPIO_GPIO(16) /* GPIO [16] */
+#define GPIO_GPIO17 GPIO_GPIO(17) /* GPIO [17] */
+#define GPIO_GPIO18 GPIO_GPIO(18) /* GPIO [18] */
+#define GPIO_GPIO19 GPIO_GPIO(19) /* GPIO [19] */
+#define GPIO_GPIO20 GPIO_GPIO(20) /* GPIO [20] */
+#define GPIO_GPIO21 GPIO_GPIO(21) /* GPIO [21] */
+#define GPIO_GPIO22 GPIO_GPIO(22) /* GPIO [22] */
+#define GPIO_GPIO23 GPIO_GPIO(23) /* GPIO [23] */
+#define GPIO_GPIO24 GPIO_GPIO(24) /* GPIO [24] */
+#define GPIO_GPIO25 GPIO_GPIO(25) /* GPIO [25] */
+#define GPIO_GPIO26 GPIO_GPIO(26) /* GPIO [26] */
+#define GPIO_GPIO27 GPIO_GPIO(27) /* GPIO [27] */
+
diff --git a/arch/unicore32/include/mach/regs-i2c.h b/arch/unicore32/include/mach/regs-i2c.h
new file mode 100644
index 00000000000..463d108f8bf
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-i2c.h
@@ -0,0 +1,63 @@
+/*
+ * PKUnity Inter-integrated Circuit (I2C) Registers
+ */
+
+/*
+ * Control Reg I2C_CON.
+ */
+#define I2C_CON (PKUNITY_I2C_BASE + 0x0000)
+/*
+ * Target Address Reg I2C_TAR.
+ */
+#define I2C_TAR (PKUNITY_I2C_BASE + 0x0004)
+/*
+ * Data buffer and command Reg I2C_DATACMD.
+ */
+#define I2C_DATACMD (PKUNITY_I2C_BASE + 0x0010)
+/*
+ * Enable Reg I2C_ENABLE.
+ */
+#define I2C_ENABLE (PKUNITY_I2C_BASE + 0x006C)
+/*
+ * Status Reg I2C_STATUS.
+ */
+#define I2C_STATUS (PKUNITY_I2C_BASE + 0x0070)
+/*
+ * Tx FIFO Length Reg I2C_TXFLR.
+ */
+#define I2C_TXFLR (PKUNITY_I2C_BASE + 0x0074)
+/*
+ * Rx FIFO Length Reg I2C_RXFLR.
+ */
+#define I2C_RXFLR (PKUNITY_I2C_BASE + 0x0078)
+/*
+ * Enable Status Reg I2C_ENSTATUS.
+ */
+#define I2C_ENSTATUS (PKUNITY_I2C_BASE + 0x009C)
+
+#define I2C_CON_MASTER FIELD(1, 1, 0)
+#define I2C_CON_SPEED_STD FIELD(1, 2, 1)
+#define I2C_CON_SPEED_FAST FIELD(2, 2, 1)
+#define I2C_CON_RESTART FIELD(1, 1, 5)
+#define I2C_CON_SLAVEDISABLE FIELD(1, 1, 6)
+
+#define I2C_DATACMD_READ FIELD(1, 1, 8)
+#define I2C_DATACMD_WRITE FIELD(0, 1, 8)
+#define I2C_DATACMD_DAT_MASK FMASK(8, 0)
+#define I2C_DATACMD_DAT(v) FIELD((v), 8, 0)
+
+#define I2C_ENABLE_ENABLE FIELD(1, 1, 0)
+#define I2C_ENABLE_DISABLE FIELD(0, 1, 0)
+
+#define I2C_STATUS_RFF FIELD(1, 1, 4)
+#define I2C_STATUS_RFNE FIELD(1, 1, 3)
+#define I2C_STATUS_TFE FIELD(1, 1, 2)
+#define I2C_STATUS_TFNF FIELD(1, 1, 1)
+#define I2C_STATUS_ACTIVITY FIELD(1, 1, 0)
+
+#define I2C_ENSTATUS_ENABLE FIELD(1, 1, 0)
+
+#define I2C_TAR_THERMAL 0x4f
+#define I2C_TAR_SPD 0x50
+#define I2C_TAR_PWIC 0x55
+#define I2C_TAR_EEPROM 0x57
diff --git a/arch/unicore32/include/mach/regs-intc.h b/arch/unicore32/include/mach/regs-intc.h
new file mode 100644
index 00000000000..25648f89cbd
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-intc.h
@@ -0,0 +1,28 @@
+/*
+ * PKUNITY Interrupt Controller (INTC) Registers
+ */
+/*
+ * INTC Level Reg INTC_ICLR.
+ */
+#define INTC_ICLR (PKUNITY_INTC_BASE + 0x0000)
+/*
+ * INTC Mask Reg INTC_ICMR.
+ */
+#define INTC_ICMR (PKUNITY_INTC_BASE + 0x0004)
+/*
+ * INTC Pending Reg INTC_ICPR.
+ */
+#define INTC_ICPR (PKUNITY_INTC_BASE + 0x0008)
+/*
+ * INTC IRQ Pending Reg INTC_ICIP.
+ */
+#define INTC_ICIP (PKUNITY_INTC_BASE + 0x000C)
+/*
+ * INTC REAL Pending Reg INTC_ICFP.
+ */
+#define INTC_ICFP (PKUNITY_INTC_BASE + 0x0010)
+/*
+ * INTC Control Reg INTC_ICCR.
+ */
+#define INTC_ICCR (PKUNITY_INTC_BASE + 0x0014)
+
diff --git a/arch/unicore32/include/mach/regs-nand.h b/arch/unicore32/include/mach/regs-nand.h
new file mode 100644
index 00000000000..a7c5563bb55
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-nand.h
@@ -0,0 +1,79 @@
+/*
+ * PKUnity NAND Controller Registers
+ */
+/*
+ * ID Reg. 0 NAND_IDR0
+ */
+#define NAND_IDR0 (PKUNITY_NAND_BASE + 0x0000)
+/*
+ * ID Reg. 1 NAND_IDR1
+ */
+#define NAND_IDR1 (PKUNITY_NAND_BASE + 0x0004)
+/*
+ * ID Reg. 2 NAND_IDR2
+ */
+#define NAND_IDR2 (PKUNITY_NAND_BASE + 0x0008)
+/*
+ * ID Reg. 3 NAND_IDR3
+ */
+#define NAND_IDR3 (PKUNITY_NAND_BASE + 0x000C)
+/*
+ * Page Address Reg 0 NAND_PAR0
+ */
+#define NAND_PAR0 (PKUNITY_NAND_BASE + 0x0010)
+/*
+ * Page Address Reg 1 NAND_PAR1
+ */
+#define NAND_PAR1 (PKUNITY_NAND_BASE + 0x0014)
+/*
+ * Page Address Reg 2 NAND_PAR2
+ */
+#define NAND_PAR2 (PKUNITY_NAND_BASE + 0x0018)
+/*
+ * ECC Enable Reg NAND_ECCEN
+ */
+#define NAND_ECCEN (PKUNITY_NAND_BASE + 0x001C)
+/*
+ * Buffer Reg NAND_BUF
+ */
+#define NAND_BUF (PKUNITY_NAND_BASE + 0x0020)
+/*
+ * ECC Status Reg NAND_ECCSR
+ */
+#define NAND_ECCSR (PKUNITY_NAND_BASE + 0x0024)
+/*
+ * Command Reg NAND_CMD
+ */
+#define NAND_CMD (PKUNITY_NAND_BASE + 0x0028)
+/*
+ * DMA Configure Reg NAND_DMACR
+ */
+#define NAND_DMACR (PKUNITY_NAND_BASE + 0x002C)
+/*
+ * Interrupt Reg NAND_IR
+ */
+#define NAND_IR (PKUNITY_NAND_BASE + 0x0030)
+/*
+ * Interrupt Mask Reg NAND_IMR
+ */
+#define NAND_IMR (PKUNITY_NAND_BASE + 0x0034)
+/*
+ * Chip Enable Reg NAND_CHIPEN
+ */
+#define NAND_CHIPEN (PKUNITY_NAND_BASE + 0x0038)
+/*
+ * Address Reg NAND_ADDR
+ */
+#define NAND_ADDR (PKUNITY_NAND_BASE + 0x003C)
+
+/*
+ * Command bits NAND_CMD_CMD_MASK
+ */
+#define NAND_CMD_CMD_MASK FMASK(4, 4)
+#define NAND_CMD_CMD_READPAGE FIELD(0x0, 4, 4)
+#define NAND_CMD_CMD_ERASEBLOCK FIELD(0x6, 4, 4)
+#define NAND_CMD_CMD_READSTATUS FIELD(0x7, 4, 4)
+#define NAND_CMD_CMD_WRITEPAGE FIELD(0x8, 4, 4)
+#define NAND_CMD_CMD_READID FIELD(0x9, 4, 4)
+#define NAND_CMD_CMD_RESET FIELD(0xf, 4, 4)
+
diff --git a/arch/unicore32/include/mach/regs-ost.h b/arch/unicore32/include/mach/regs-ost.h
new file mode 100644
index 00000000000..7b91fe698ee
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-ost.h
@@ -0,0 +1,92 @@
+/*
+ * PKUnity Operating System Timer (OST) Registers
+ */
+/*
+ * Match Reg 0 OST_OSMR0
+ */
+#define OST_OSMR0 (PKUNITY_OST_BASE + 0x0000)
+/*
+ * Match Reg 1 OST_OSMR1
+ */
+#define OST_OSMR1 (PKUNITY_OST_BASE + 0x0004)
+/*
+ * Match Reg 2 OST_OSMR2
+ */
+#define OST_OSMR2 (PKUNITY_OST_BASE + 0x0008)
+/*
+ * Match Reg 3 OST_OSMR3
+ */
+#define OST_OSMR3 (PKUNITY_OST_BASE + 0x000C)
+/*
+ * Counter Reg OST_OSCR
+ */
+#define OST_OSCR (PKUNITY_OST_BASE + 0x0010)
+/*
+ * Status Reg OST_OSSR
+ */
+#define OST_OSSR (PKUNITY_OST_BASE + 0x0014)
+/*
+ * Watchdog Enable Reg OST_OWER
+ */
+#define OST_OWER (PKUNITY_OST_BASE + 0x0018)
+/*
+ * Interrupt Enable Reg OST_OIER
+ */
+#define OST_OIER (PKUNITY_OST_BASE + 0x001C)
+/*
+ * PWM Pulse Width Control Reg OST_PWMPWCR
+ */
+#define OST_PWMPWCR (PKUNITY_OST_BASE + 0x0080)
+/*
+ * PWM Duty Cycle Control Reg OST_PWMDCCR
+ */
+#define OST_PWMDCCR (PKUNITY_OST_BASE + 0x0084)
+/*
+ * PWM Period Control Reg OST_PWMPCR
+ */
+#define OST_PWMPCR (PKUNITY_OST_BASE + 0x0088)
+
+/*
+ * Match detected 0 OST_OSSR_M0
+ */
+#define OST_OSSR_M0 FIELD(1, 1, 0)
+/*
+ * Match detected 1 OST_OSSR_M1
+ */
+#define OST_OSSR_M1 FIELD(1, 1, 1)
+/*
+ * Match detected 2 OST_OSSR_M2
+ */
+#define OST_OSSR_M2 FIELD(1, 1, 2)
+/*
+ * Match detected 3 OST_OSSR_M3
+ */
+#define OST_OSSR_M3 FIELD(1, 1, 3)
+
+/*
+ * Interrupt enable 0 OST_OIER_E0
+ */
+#define OST_OIER_E0 FIELD(1, 1, 0)
+/*
+ * Interrupt enable 1 OST_OIER_E1
+ */
+#define OST_OIER_E1 FIELD(1, 1, 1)
+/*
+ * Interrupt enable 2 OST_OIER_E2
+ */
+#define OST_OIER_E2 FIELD(1, 1, 2)
+/*
+ * Interrupt enable 3 OST_OIER_E3
+ */
+#define OST_OIER_E3 FIELD(1, 1, 3)
+
+/*
+ * Watchdog Match Enable OST_OWER_WME
+ */
+#define OST_OWER_WME FIELD(1, 1, 0)
+
+/*
+ * PWM Full Duty Cycle OST_PWMDCCR_FDCYCLE
+ */
+#define OST_PWMDCCR_FDCYCLE FIELD(1, 1, 10)
+
diff --git a/arch/unicore32/include/mach/regs-pci.h b/arch/unicore32/include/mach/regs-pci.h
new file mode 100644
index 00000000000..6a9341686bf
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-pci.h
@@ -0,0 +1,94 @@
+/*
+ * PKUnity AHB-PCI Bridge Registers
+ */
+
+/*
+ * AHB/PCI fixed physical address for pci addess configuration
+ */
+/*
+ * PCICFG Bridge Base Reg.
+ */
+#define PCICFG_BRIBASE (PKUNITY_PCICFG_BASE + 0x0000)
+/*
+ * PCICFG Address Reg.
+ */
+#define PCICFG_ADDR (PKUNITY_PCICFG_BASE + 0x0004)
+/*
+ * PCICFG Address Reg.
+ */
+#define PCICFG_DATA (PKUNITY_PCICFG_BASE + 0x0008)
+
+/*
+ * PCI Bridge configuration space
+ */
+#define PCIBRI_ID (PKUNITY_PCIBRI_BASE + 0x0000)
+#define PCIBRI_CMD (PKUNITY_PCIBRI_BASE + 0x0004)
+#define PCIBRI_CLASS (PKUNITY_PCIBRI_BASE + 0x0008)
+#define PCIBRI_LTR (PKUNITY_PCIBRI_BASE + 0x000C)
+#define PCIBRI_BAR0 (PKUNITY_PCIBRI_BASE + 0x0010)
+#define PCIBRI_BAR1 (PKUNITY_PCIBRI_BASE + 0x0014)
+#define PCIBRI_BAR2 (PKUNITY_PCIBRI_BASE + 0x0018)
+#define PCIBRI_BAR3 (PKUNITY_PCIBRI_BASE + 0x001C)
+#define PCIBRI_BAR4 (PKUNITY_PCIBRI_BASE + 0x0020)
+#define PCIBRI_BAR5 (PKUNITY_PCIBRI_BASE + 0x0024)
+
+#define PCIBRI_PCICTL0 (PKUNITY_PCIBRI_BASE + 0x0100)
+#define PCIBRI_PCIBAR0 (PKUNITY_PCIBRI_BASE + 0x0104)
+#define PCIBRI_PCIAMR0 (PKUNITY_PCIBRI_BASE + 0x0108)
+#define PCIBRI_PCITAR0 (PKUNITY_PCIBRI_BASE + 0x010C)
+#define PCIBRI_PCICTL1 (PKUNITY_PCIBRI_BASE + 0x0110)
+#define PCIBRI_PCIBAR1 (PKUNITY_PCIBRI_BASE + 0x0114)
+#define PCIBRI_PCIAMR1 (PKUNITY_PCIBRI_BASE + 0x0118)
+#define PCIBRI_PCITAR1 (PKUNITY_PCIBRI_BASE + 0x011C)
+#define PCIBRI_PCICTL2 (PKUNITY_PCIBRI_BASE + 0x0120)
+#define PCIBRI_PCIBAR2 (PKUNITY_PCIBRI_BASE + 0x0124)
+#define PCIBRI_PCIAMR2 (PKUNITY_PCIBRI_BASE + 0x0128)
+#define PCIBRI_PCITAR2 (PKUNITY_PCIBRI_BASE + 0x012C)
+#define PCIBRI_PCICTL3 (PKUNITY_PCIBRI_BASE + 0x0130)
+#define PCIBRI_PCIBAR3 (PKUNITY_PCIBRI_BASE + 0x0134)
+#define PCIBRI_PCIAMR3 (PKUNITY_PCIBRI_BASE + 0x0138)
+#define PCIBRI_PCITAR3 (PKUNITY_PCIBRI_BASE + 0x013C)
+#define PCIBRI_PCICTL4 (PKUNITY_PCIBRI_BASE + 0x0140)
+#define PCIBRI_PCIBAR4 (PKUNITY_PCIBRI_BASE + 0x0144)
+#define PCIBRI_PCIAMR4 (PKUNITY_PCIBRI_BASE + 0x0148)
+#define PCIBRI_PCITAR4 (PKUNITY_PCIBRI_BASE + 0x014C)
+#define PCIBRI_PCICTL5 (PKUNITY_PCIBRI_BASE + 0x0150)
+#define PCIBRI_PCIBAR5 (PKUNITY_PCIBRI_BASE + 0x0154)
+#define PCIBRI_PCIAMR5 (PKUNITY_PCIBRI_BASE + 0x0158)
+#define PCIBRI_PCITAR5 (PKUNITY_PCIBRI_BASE + 0x015C)
+
+#define PCIBRI_AHBCTL0 (PKUNITY_PCIBRI_BASE + 0x0180)
+#define PCIBRI_AHBBAR0 (PKUNITY_PCIBRI_BASE + 0x0184)
+#define PCIBRI_AHBAMR0 (PKUNITY_PCIBRI_BASE + 0x0188)
+#define PCIBRI_AHBTAR0 (PKUNITY_PCIBRI_BASE + 0x018C)
+#define PCIBRI_AHBCTL1 (PKUNITY_PCIBRI_BASE + 0x0190)
+#define PCIBRI_AHBBAR1 (PKUNITY_PCIBRI_BASE + 0x0194)
+#define PCIBRI_AHBAMR1 (PKUNITY_PCIBRI_BASE + 0x0198)
+#define PCIBRI_AHBTAR1 (PKUNITY_PCIBRI_BASE + 0x019C)
+#define PCIBRI_AHBCTL2 (PKUNITY_PCIBRI_BASE + 0x01A0)
+#define PCIBRI_AHBBAR2 (PKUNITY_PCIBRI_BASE + 0x01A4)
+#define PCIBRI_AHBAMR2 (PKUNITY_PCIBRI_BASE + 0x01A8)
+#define PCIBRI_AHBTAR2 (PKUNITY_PCIBRI_BASE + 0x01AC)
+#define PCIBRI_AHBCTL3 (PKUNITY_PCIBRI_BASE + 0x01B0)
+#define PCIBRI_AHBBAR3 (PKUNITY_PCIBRI_BASE + 0x01B4)
+#define PCIBRI_AHBAMR3 (PKUNITY_PCIBRI_BASE + 0x01B8)
+#define PCIBRI_AHBTAR3 (PKUNITY_PCIBRI_BASE + 0x01BC)
+#define PCIBRI_AHBCTL4 (PKUNITY_PCIBRI_BASE + 0x01C0)
+#define PCIBRI_AHBBAR4 (PKUNITY_PCIBRI_BASE + 0x01C4)
+#define PCIBRI_AHBAMR4 (PKUNITY_PCIBRI_BASE + 0x01C8)
+#define PCIBRI_AHBTAR4 (PKUNITY_PCIBRI_BASE + 0x01CC)
+#define PCIBRI_AHBCTL5 (PKUNITY_PCIBRI_BASE + 0x01D0)
+#define PCIBRI_AHBBAR5 (PKUNITY_PCIBRI_BASE + 0x01D4)
+#define PCIBRI_AHBAMR5 (PKUNITY_PCIBRI_BASE + 0x01D8)
+#define PCIBRI_AHBTAR5 (PKUNITY_PCIBRI_BASE + 0x01DC)
+
+#define PCIBRI_CTLx_AT FIELD(1, 1, 2)
+#define PCIBRI_CTLx_PREF FIELD(1, 1, 1)
+#define PCIBRI_CTLx_MRL FIELD(1, 1, 0)
+
+#define PCIBRI_BARx_ADDR FIELD(0xFFFFFFFC, 30, 2)
+#define PCIBRI_BARx_IO FIELD(1, 1, 0)
+#define PCIBRI_BARx_MEM FIELD(0, 1, 0)
+
+#define PCIBRI_CMD_IO FIELD(1, 1, 0)
+#define PCIBRI_CMD_MEM FIELD(1, 1, 1)
diff --git a/arch/unicore32/include/mach/regs-pm.h b/arch/unicore32/include/mach/regs-pm.h
new file mode 100644
index 00000000000..854844aa8f4
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-pm.h
@@ -0,0 +1,126 @@
+/*
+ * PKUNITY Power Manager (PM) Registers
+ */
+/*
+ * PM Control Reg PM_PMCR
+ */
+#define PM_PMCR (PKUNITY_PM_BASE + 0x0000)
+/*
+ * PM General Conf. Reg PM_PGCR
+ */
+#define PM_PGCR (PKUNITY_PM_BASE + 0x0004)
+/*
+ * PM PLL Conf. Reg PM_PPCR
+ */
+#define PM_PPCR (PKUNITY_PM_BASE + 0x0008)
+/*
+ * PM Wakeup Enable Reg PM_PWER
+ */
+#define PM_PWER (PKUNITY_PM_BASE + 0x000C)
+/*
+ * PM GPIO Sleep Status Reg PM_PGSR
+ */
+#define PM_PGSR (PKUNITY_PM_BASE + 0x0010)
+/*
+ * PM Clock Gate Reg PM_PCGR
+ */
+#define PM_PCGR (PKUNITY_PM_BASE + 0x0014)
+/*
+ * PM SYS PLL Conf. Reg PM_PLLSYSCFG
+ */
+#define PM_PLLSYSCFG (PKUNITY_PM_BASE + 0x0018)
+/*
+ * PM DDR PLL Conf. Reg PM_PLLDDRCFG
+ */
+#define PM_PLLDDRCFG (PKUNITY_PM_BASE + 0x001C)
+/*
+ * PM VGA PLL Conf. Reg PM_PLLVGACFG
+ */
+#define PM_PLLVGACFG (PKUNITY_PM_BASE + 0x0020)
+/*
+ * PM Div Conf. Reg PM_DIVCFG
+ */
+#define PM_DIVCFG (PKUNITY_PM_BASE + 0x0024)
+/*
+ * PM SYS PLL Status Reg PM_PLLSYSSTATUS
+ */
+#define PM_PLLSYSSTATUS (PKUNITY_PM_BASE + 0x0028)
+/*
+ * PM DDR PLL Status Reg PM_PLLDDRSTATUS
+ */
+#define PM_PLLDDRSTATUS (PKUNITY_PM_BASE + 0x002C)
+/*
+ * PM VGA PLL Status Reg PM_PLLVGASTATUS
+ */
+#define PM_PLLVGASTATUS (PKUNITY_PM_BASE + 0x0030)
+/*
+ * PM Div Status Reg PM_DIVSTATUS
+ */
+#define PM_DIVSTATUS (PKUNITY_PM_BASE + 0x0034)
+/*
+ * PM Software Reset Reg PM_SWRESET
+ */
+#define PM_SWRESET (PKUNITY_PM_BASE + 0x0038)
+/*
+ * PM DDR2 PAD Start Reg PM_DDR2START
+ */
+#define PM_DDR2START (PKUNITY_PM_BASE + 0x003C)
+/*
+ * PM DDR2 PAD Status Reg PM_DDR2CAL0
+ */
+#define PM_DDR2CAL0 (PKUNITY_PM_BASE + 0x0040)
+/*
+ * PM PLL DFC Done Reg PM_PLLDFCDONE
+ */
+#define PM_PLLDFCDONE (PKUNITY_PM_BASE + 0x0044)
+
+#define PM_PMCR_SFB FIELD(1, 1, 0)
+#define PM_PMCR_IFB FIELD(1, 1, 1)
+#define PM_PMCR_CFBSYS FIELD(1, 1, 2)
+#define PM_PMCR_CFBDDR FIELD(1, 1, 3)
+#define PM_PMCR_CFBVGA FIELD(1, 1, 4)
+#define PM_PMCR_CFBDIVBCLK FIELD(1, 1, 5)
+
+/*
+ * GPIO 8~27 wake-up enable PM_PWER_GPIOHIGH
+ */
+#define PM_PWER_GPIOHIGH FIELD(1, 1, 8)
+/*
+ * RTC alarm wake-up enable PM_PWER_RTC
+ */
+#define PM_PWER_RTC FIELD(1, 1, 31)
+
+#define PM_PCGR_BCLK64DDR FIELD(1, 1, 0)
+#define PM_PCGR_BCLK64VGA FIELD(1, 1, 1)
+#define PM_PCGR_BCLKDDR FIELD(1, 1, 2)
+#define PM_PCGR_BCLKPCI FIELD(1, 1, 4)
+#define PM_PCGR_BCLKDMAC FIELD(1, 1, 5)
+#define PM_PCGR_BCLKUMAL FIELD(1, 1, 6)
+#define PM_PCGR_BCLKUSB FIELD(1, 1, 7)
+#define PM_PCGR_BCLKMME FIELD(1, 1, 10)
+#define PM_PCGR_BCLKNAND FIELD(1, 1, 11)
+#define PM_PCGR_BCLKH264E FIELD(1, 1, 12)
+#define PM_PCGR_BCLKVGA FIELD(1, 1, 13)
+#define PM_PCGR_BCLKH264D FIELD(1, 1, 14)
+#define PM_PCGR_VECLK FIELD(1, 1, 15)
+#define PM_PCGR_HECLK FIELD(1, 1, 16)
+#define PM_PCGR_HDCLK FIELD(1, 1, 17)
+#define PM_PCGR_NANDCLK FIELD(1, 1, 18)
+#define PM_PCGR_GECLK FIELD(1, 1, 19)
+#define PM_PCGR_VGACLK FIELD(1, 1, 20)
+#define PM_PCGR_PCICLK FIELD(1, 1, 21)
+#define PM_PCGR_SATACLK FIELD(1, 1, 25)
+
+/*
+ * [23:20]PM_DIVCFG_VGACLK(v)
+ */
+#define PM_DIVCFG_VGACLK_MASK FMASK(4, 20)
+#define PM_DIVCFG_VGACLK(v) FIELD((v), 4, 20)
+
+#define PM_SWRESET_USB FIELD(1, 1, 6)
+#define PM_SWRESET_VGADIV FIELD(1, 1, 26)
+#define PM_SWRESET_GEDIV FIELD(1, 1, 27)
+
+#define PM_PLLDFCDONE_SYSDFC FIELD(1, 1, 0)
+#define PM_PLLDFCDONE_DDRDFC FIELD(1, 1, 1)
+#define PM_PLLDFCDONE_VGADFC FIELD(1, 1, 2)
diff --git a/arch/unicore32/include/mach/regs-ps2.h b/arch/unicore32/include/mach/regs-ps2.h
new file mode 100644
index 00000000000..17d4e6dc006
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-ps2.h
@@ -0,0 +1,20 @@
+/*
+ * PKUnity PS2 Controller Registers
+ */
+/*
+ * the same as I8042_DATA_REG PS2_DATA
+ */
+#define PS2_DATA (PKUNITY_PS2_BASE + 0x0060)
+/*
+ * the same as I8042_COMMAND_REG PS2_COMMAND
+ */
+#define PS2_COMMAND (PKUNITY_PS2_BASE + 0x0064)
+/*
+ * the same as I8042_STATUS_REG PS2_STATUS
+ */
+#define PS2_STATUS (PKUNITY_PS2_BASE + 0x0064)
+/*
+ * counter reg PS2_CNT
+ */
+#define PS2_CNT (PKUNITY_PS2_BASE + 0x0068)
+
diff --git a/arch/unicore32/include/mach/regs-resetc.h b/arch/unicore32/include/mach/regs-resetc.h
new file mode 100644
index 00000000000..39900cf4c93
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-resetc.h
@@ -0,0 +1,34 @@
+/*
+ * PKUnity Reset Controller (RC) Registers
+ */
+/*
+ * Software Reset Register
+ */
+#define RESETC_SWRR (PKUNITY_RESETC_BASE + 0x0000)
+/*
+ * Reset Status Register
+ */
+#define RESETC_RSSR (PKUNITY_RESETC_BASE + 0x0004)
+
+/*
+ * Software Reset Bit
+ */
+#define RESETC_SWRR_SRB FIELD(1, 1, 0)
+
+/*
+ * Hardware Reset
+ */
+#define RESETC_RSSR_HWR FIELD(1, 1, 0)
+/*
+ * Software Reset
+ */
+#define RESETC_RSSR_SWR FIELD(1, 1, 1)
+/*
+ * Watchdog Reset
+ */
+#define RESETC_RSSR_WDR FIELD(1, 1, 2)
+/*
+ * Sleep Mode Reset
+ */
+#define RESETC_RSSR_SMR FIELD(1, 1, 3)
+
diff --git a/arch/unicore32/include/mach/regs-rtc.h b/arch/unicore32/include/mach/regs-rtc.h
new file mode 100644
index 00000000000..e94ca193271
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-rtc.h
@@ -0,0 +1,37 @@
+/*
+ * PKUnity Real-Time Clock (RTC) control registers
+ */
+/*
+ * RTC Alarm Reg RTC_RTAR
+ */
+#define RTC_RTAR (PKUNITY_RTC_BASE + 0x0000)
+/*
+ * RTC Count Reg RTC_RCNR
+ */
+#define RTC_RCNR (PKUNITY_RTC_BASE + 0x0004)
+/*
+ * RTC Trim Reg RTC_RTTR
+ */
+#define RTC_RTTR (PKUNITY_RTC_BASE + 0x0008)
+/*
+ * RTC Status Reg RTC_RTSR
+ */
+#define RTC_RTSR (PKUNITY_RTC_BASE + 0x0010)
+
+/*
+ * ALarm detected RTC_RTSR_AL
+ */
+#define RTC_RTSR_AL FIELD(1, 1, 0)
+/*
+ * 1 Hz clock detected RTC_RTSR_HZ
+ */
+#define RTC_RTSR_HZ FIELD(1, 1, 1)
+/*
+ * ALarm interrupt Enable RTC_RTSR_ALE
+ */
+#define RTC_RTSR_ALE FIELD(1, 1, 2)
+/*
+ * 1 Hz clock interrupt Enable RTC_RTSR_HZE
+ */
+#define RTC_RTSR_HZE FIELD(1, 1, 3)
+
diff --git a/arch/unicore32/include/mach/regs-sdc.h b/arch/unicore32/include/mach/regs-sdc.h
new file mode 100644
index 00000000000..1303ecf660b
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-sdc.h
@@ -0,0 +1,156 @@
+/*
+ * PKUnity Multi-Media Card and Security Digital Card (MMC/SD) Registers
+ */
+/*
+ * Clock Control Reg SDC_CCR
+ */
+#define SDC_CCR (PKUNITY_SDC_BASE + 0x0000)
+/*
+ * Software Reset Reg SDC_SRR
+ */
+#define SDC_SRR (PKUNITY_SDC_BASE + 0x0004)
+/*
+ * Argument Reg SDC_ARGUMENT
+ */
+#define SDC_ARGUMENT (PKUNITY_SDC_BASE + 0x0008)
+/*
+ * Command Reg SDC_COMMAND
+ */
+#define SDC_COMMAND (PKUNITY_SDC_BASE + 0x000C)
+/*
+ * Block Size Reg SDC_BLOCKSIZE
+ */
+#define SDC_BLOCKSIZE (PKUNITY_SDC_BASE + 0x0010)
+/*
+ * Block Cound Reg SDC_BLOCKCOUNT
+ */
+#define SDC_BLOCKCOUNT (PKUNITY_SDC_BASE + 0x0014)
+/*
+ * Transfer Mode Reg SDC_TMR
+ */
+#define SDC_TMR (PKUNITY_SDC_BASE + 0x0018)
+/*
+ * Response Reg. 0 SDC_RES0
+ */
+#define SDC_RES0 (PKUNITY_SDC_BASE + 0x001C)
+/*
+ * Response Reg. 1 SDC_RES1
+ */
+#define SDC_RES1 (PKUNITY_SDC_BASE + 0x0020)
+/*
+ * Response Reg. 2 SDC_RES2
+ */
+#define SDC_RES2 (PKUNITY_SDC_BASE + 0x0024)
+/*
+ * Response Reg. 3 SDC_RES3
+ */
+#define SDC_RES3 (PKUNITY_SDC_BASE + 0x0028)
+/*
+ * Read Timeout Control Reg SDC_RTCR
+ */
+#define SDC_RTCR (PKUNITY_SDC_BASE + 0x002C)
+/*
+ * Interrupt Status Reg SDC_ISR
+ */
+#define SDC_ISR (PKUNITY_SDC_BASE + 0x0030)
+/*
+ * Interrupt Status Mask Reg SDC_ISMR
+ */
+#define SDC_ISMR (PKUNITY_SDC_BASE + 0x0034)
+/*
+ * RX FIFO SDC_RXFIFO
+ */
+#define SDC_RXFIFO (PKUNITY_SDC_BASE + 0x0038)
+/*
+ * TX FIFO SDC_TXFIFO
+ */
+#define SDC_TXFIFO (PKUNITY_SDC_BASE + 0x003C)
+
+/*
+ * SD Clock Enable SDC_CCR_CLKEN
+ */
+#define SDC_CCR_CLKEN FIELD(1, 1, 2)
+/*
+ * [15:8] SDC_CCR_PDIV(v)
+ */
+#define SDC_CCR_PDIV(v) FIELD((v), 8, 8)
+
+/*
+ * Software reset enable SDC_SRR_ENABLE
+ */
+#define SDC_SRR_ENABLE FIELD(0, 1, 0)
+/*
+ * Software reset disable SDC_SRR_DISABLE
+ */
+#define SDC_SRR_DISABLE FIELD(1, 1, 0)
+
+/*
+ * Response type SDC_COMMAND_RESTYPE_MASK
+ */
+#define SDC_COMMAND_RESTYPE_MASK FMASK(2, 0)
+/*
+ * No response SDC_COMMAND_RESTYPE_NONE
+ */
+#define SDC_COMMAND_RESTYPE_NONE FIELD(0, 2, 0)
+/*
+ * 136-bit long response SDC_COMMAND_RESTYPE_LONG
+ */
+#define SDC_COMMAND_RESTYPE_LONG FIELD(1, 2, 0)
+/*
+ * 48-bit short response SDC_COMMAND_RESTYPE_SHORT
+ */
+#define SDC_COMMAND_RESTYPE_SHORT FIELD(2, 2, 0)
+/*
+ * 48-bit short and test if busy response SDC_COMMAND_RESTYPE_SHORTBUSY
+ */
+#define SDC_COMMAND_RESTYPE_SHORTBUSY FIELD(3, 2, 0)
+/*
+ * data ready SDC_COMMAND_DATAREADY
+ */
+#define SDC_COMMAND_DATAREADY FIELD(1, 1, 2)
+#define SDC_COMMAND_CMDEN FIELD(1, 1, 3)
+/*
+ * [10:5] SDC_COMMAND_CMDINDEX(v)
+ */
+#define SDC_COMMAND_CMDINDEX(v) FIELD((v), 6, 5)
+
+/*
+ * [10:0] SDC_BLOCKSIZE_BSMASK(v)
+ */
+#define SDC_BLOCKSIZE_BSMASK(v) FIELD((v), 11, 0)
+/*
+ * [11:0] SDC_BLOCKCOUNT_BCMASK(v)
+ */
+#define SDC_BLOCKCOUNT_BCMASK(v) FIELD((v), 12, 0)
+
+/*
+ * Data Width 1bit SDC_TMR_WTH_1BIT
+ */
+#define SDC_TMR_WTH_1BIT FIELD(0, 1, 0)
+/*
+ * Data Width 4bit SDC_TMR_WTH_4BIT
+ */
+#define SDC_TMR_WTH_4BIT FIELD(1, 1, 0)
+/*
+ * Read SDC_TMR_DIR_READ
+ */
+#define SDC_TMR_DIR_READ FIELD(0, 1, 1)
+/*
+ * Write SDC_TMR_DIR_WRITE
+ */
+#define SDC_TMR_DIR_WRITE FIELD(1, 1, 1)
+
+#define SDC_IR_MASK FMASK(13, 0)
+#define SDC_IR_RESTIMEOUT FIELD(1, 1, 0)
+#define SDC_IR_WRITECRC FIELD(1, 1, 1)
+#define SDC_IR_READCRC FIELD(1, 1, 2)
+#define SDC_IR_TXFIFOREAD FIELD(1, 1, 3)
+#define SDC_IR_RXFIFOWRITE FIELD(1, 1, 4)
+#define SDC_IR_READTIMEOUT FIELD(1, 1, 5)
+#define SDC_IR_DATACOMPLETE FIELD(1, 1, 6)
+#define SDC_IR_CMDCOMPLETE FIELD(1, 1, 7)
+#define SDC_IR_RXFIFOFULL FIELD(1, 1, 8)
+#define SDC_IR_RXFIFOEMPTY FIELD(1, 1, 9)
+#define SDC_IR_TXFIFOFULL FIELD(1, 1, 10)
+#define SDC_IR_TXFIFOEMPTY FIELD(1, 1, 11)
+#define SDC_IR_ENDCMDWITHRES FIELD(1, 1, 12)
diff --git a/arch/unicore32/include/mach/regs-spi.h b/arch/unicore32/include/mach/regs-spi.h
new file mode 100644
index 00000000000..de16895e2dc
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-spi.h
@@ -0,0 +1,98 @@
+/*
+ * PKUnity Serial Peripheral Interface (SPI) Registers
+ */
+/*
+ * Control reg. 0 SPI_CR0
+ */
+#define SPI_CR0 (PKUNITY_SPI_BASE + 0x0000)
+/*
+ * Control reg. 1 SPI_CR1
+ */
+#define SPI_CR1 (PKUNITY_SPI_BASE + 0x0004)
+/*
+ * Enable reg SPI_SSIENR
+ */
+#define SPI_SSIENR (PKUNITY_SPI_BASE + 0x0008)
+/*
+ * Status reg SPI_SR
+ */
+#define SPI_SR (PKUNITY_SPI_BASE + 0x0028)
+/*
+ * Interrupt Mask reg SPI_IMR
+ */
+#define SPI_IMR (PKUNITY_SPI_BASE + 0x002C)
+/*
+ * Interrupt Status reg SPI_ISR
+ */
+#define SPI_ISR (PKUNITY_SPI_BASE + 0x0030)
+
+/*
+ * Enable SPI Controller SPI_SSIENR_EN
+ */
+#define SPI_SSIENR_EN FIELD(1, 1, 0)
+
+/*
+ * SPI Busy SPI_SR_BUSY
+ */
+#define SPI_SR_BUSY FIELD(1, 1, 0)
+/*
+ * Transmit FIFO Not Full SPI_SR_TFNF
+ */
+#define SPI_SR_TFNF FIELD(1, 1, 1)
+/*
+ * Transmit FIFO Empty SPI_SR_TFE
+ */
+#define SPI_SR_TFE FIELD(1, 1, 2)
+/*
+ * Receive FIFO Not Empty SPI_SR_RFNE
+ */
+#define SPI_SR_RFNE FIELD(1, 1, 3)
+/*
+ * Receive FIFO Full SPI_SR_RFF
+ */
+#define SPI_SR_RFF FIELD(1, 1, 4)
+
+/*
+ * Trans. FIFO Empty Interrupt Status SPI_ISR_TXEIS
+ */
+#define SPI_ISR_TXEIS FIELD(1, 1, 0)
+/*
+ * Trans. FIFO Overflow Interrupt Status SPI_ISR_TXOIS
+ */
+#define SPI_ISR_TXOIS FIELD(1, 1, 1)
+/*
+ * Receiv. FIFO Underflow Interrupt Status SPI_ISR_RXUIS
+ */
+#define SPI_ISR_RXUIS FIELD(1, 1, 2)
+/*
+ * Receiv. FIFO Overflow Interrupt Status SPI_ISR_RXOIS
+ */
+#define SPI_ISR_RXOIS FIELD(1, 1, 3)
+/*
+ * Receiv. FIFO Full Interrupt Status SPI_ISR_RXFIS
+ */
+#define SPI_ISR_RXFIS FIELD(1, 1, 4)
+#define SPI_ISR_MSTIS FIELD(1, 1, 5)
+
+/*
+ * Trans. FIFO Empty Interrupt Mask SPI_IMR_TXEIM
+ */
+#define SPI_IMR_TXEIM FIELD(1, 1, 0)
+/*
+ * Trans. FIFO Overflow Interrupt Mask SPI_IMR_TXOIM
+ */
+#define SPI_IMR_TXOIM FIELD(1, 1, 1)
+/*
+ * Receiv. FIFO Underflow Interrupt Mask SPI_IMR_RXUIM
+ */
+#define SPI_IMR_RXUIM FIELD(1, 1, 2)
+/*
+ * Receiv. FIFO Overflow Interrupt Mask SPI_IMR_RXOIM
+ */
+#define SPI_IMR_RXOIM FIELD(1, 1, 3)
+/*
+ * Receiv. FIFO Full Interrupt Mask SPI_IMR_RXFIM
+ */
+#define SPI_IMR_RXFIM FIELD(1, 1, 4)
+#define SPI_IMR_MSTIM FIELD(1, 1, 5)
+
diff --git a/arch/unicore32/include/mach/regs-uart.h b/arch/unicore32/include/mach/regs-uart.h
new file mode 100644
index 00000000000..9fa6b1938b7
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-uart.h
@@ -0,0 +1,3 @@
+/*
+ * PKUnity Universal Asynchronous Receiver/Transmitter (UART) Registers
+ */
diff --git a/arch/unicore32/include/mach/regs-umal.h b/arch/unicore32/include/mach/regs-umal.h
new file mode 100644
index 00000000000..885bb62fee7
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-umal.h
@@ -0,0 +1,229 @@
+/*
+ * PKUnity Ultra Media Access Layer (UMAL) Ethernet MAC Registers
+ */
+
+/* MAC module of UMAL */
+/* UMAL's MAC module includes G/MII interface, several additional PHY
+ * interfaces, and MAC control sub-layer, which provides support for control
+ * frames (e.g. PAUSE frames).
+ */
+/*
+ * TX/RX reset and control UMAL_CFG1
+ */
+#define UMAL_CFG1 (PKUNITY_UMAL_BASE + 0x0000)
+/*
+ * MAC interface mode control UMAL_CFG2
+ */
+#define UMAL_CFG2 (PKUNITY_UMAL_BASE + 0x0004)
+/*
+ * Inter Packet/Frame Gap UMAL_IPGIFG
+ */
+#define UMAL_IPGIFG (PKUNITY_UMAL_BASE + 0x0008)
+/*
+ * Collision retry or backoff UMAL_HALFDUPLEX
+ */
+#define UMAL_HALFDUPLEX (PKUNITY_UMAL_BASE + 0x000c)
+/*
+ * Maximum Frame Length UMAL_MAXFRAME
+ */
+#define UMAL_MAXFRAME (PKUNITY_UMAL_BASE + 0x0010)
+/*
+ * Test Regsiter UMAL_TESTREG
+ */
+#define UMAL_TESTREG (PKUNITY_UMAL_BASE + 0x001c)
+/*
+ * MII Management Configure UMAL_MIICFG
+ */
+#define UMAL_MIICFG (PKUNITY_UMAL_BASE + 0x0020)
+/*
+ * MII Management Command UMAL_MIICMD
+ */
+#define UMAL_MIICMD (PKUNITY_UMAL_BASE + 0x0024)
+/*
+ * MII Management Address UMAL_MIIADDR
+ */
+#define UMAL_MIIADDR (PKUNITY_UMAL_BASE + 0x0028)
+/*
+ * MII Management Control UMAL_MIICTRL
+ */
+#define UMAL_MIICTRL (PKUNITY_UMAL_BASE + 0x002c)
+/*
+ * MII Management Status UMAL_MIISTATUS
+ */
+#define UMAL_MIISTATUS (PKUNITY_UMAL_BASE + 0x0030)
+/*
+ * MII Managment Indicator UMAL_MIIIDCT
+ */
+#define UMAL_MIIIDCT (PKUNITY_UMAL_BASE + 0x0034)
+/*
+ * Interface Control UMAL_IFCTRL
+ */
+#define UMAL_IFCTRL (PKUNITY_UMAL_BASE + 0x0038)
+/*
+ * Interface Status UMAL_IFSTATUS
+ */
+#define UMAL_IFSTATUS (PKUNITY_UMAL_BASE + 0x003c)
+/*
+ * MAC address (high 4 bytes) UMAL_STADDR1
+ */
+#define UMAL_STADDR1 (PKUNITY_UMAL_BASE + 0x0040)
+/*
+ * MAC address (low 2 bytes) UMAL_STADDR2
+ */
+#define UMAL_STADDR2 (PKUNITY_UMAL_BASE + 0x0044)
+
+/* FIFO MODULE OF UMAL */
+/* UMAL's FIFO module provides data queuing for increased system level
+ * throughput
+ */
+#define UMAL_FIFOCFG0 (PKUNITY_UMAL_BASE + 0x0048)
+#define UMAL_FIFOCFG1 (PKUNITY_UMAL_BASE + 0x004c)
+#define UMAL_FIFOCFG2 (PKUNITY_UMAL_BASE + 0x0050)
+#define UMAL_FIFOCFG3 (PKUNITY_UMAL_BASE + 0x0054)
+#define UMAL_FIFOCFG4 (PKUNITY_UMAL_BASE + 0x0058)
+#define UMAL_FIFOCFG5 (PKUNITY_UMAL_BASE + 0x005c)
+#define UMAL_FIFORAM0 (PKUNITY_UMAL_BASE + 0x0060)
+#define UMAL_FIFORAM1 (PKUNITY_UMAL_BASE + 0x0064)
+#define UMAL_FIFORAM2 (PKUNITY_UMAL_BASE + 0x0068)
+#define UMAL_FIFORAM3 (PKUNITY_UMAL_BASE + 0x006c)
+#define UMAL_FIFORAM4 (PKUNITY_UMAL_BASE + 0x0070)
+#define UMAL_FIFORAM5 (PKUNITY_UMAL_BASE + 0x0074)
+#define UMAL_FIFORAM6 (PKUNITY_UMAL_BASE + 0x0078)
+#define UMAL_FIFORAM7 (PKUNITY_UMAL_BASE + 0x007c)
+
+/* MAHBE MODUEL OF UMAL */
+/* UMAL's MAHBE module interfaces to the host system through 32-bit AHB Master
+ * and Slave ports.Registers within the M-AHBE provide Control and Status
+ * information concerning these transfers.
+ */
+/*
+ * Transmit Control UMAL_DMATxCtrl
+ */
+#define UMAL_DMATxCtrl (PKUNITY_UMAL_BASE + 0x0180)
+/*
+ * Pointer to TX Descripter UMAL_DMATxDescriptor
+ */
+#define UMAL_DMATxDescriptor (PKUNITY_UMAL_BASE + 0x0184)
+/*
+ * Status of Tx Packet Transfers UMAL_DMATxStatus
+ */
+#define UMAL_DMATxStatus (PKUNITY_UMAL_BASE + 0x0188)
+/*
+ * Receive Control UMAL_DMARxCtrl
+ */
+#define UMAL_DMARxCtrl (PKUNITY_UMAL_BASE + 0x018c)
+/*
+ * Pointer to Rx Descriptor UMAL_DMARxDescriptor
+ */
+#define UMAL_DMARxDescriptor (PKUNITY_UMAL_BASE + 0x0190)
+/*
+ * Status of Rx Packet Transfers UMAL_DMARxStatus
+ */
+#define UMAL_DMARxStatus (PKUNITY_UMAL_BASE + 0x0194)
+/*
+ * Interrupt Mask UMAL_DMAIntrMask
+ */
+#define UMAL_DMAIntrMask (PKUNITY_UMAL_BASE + 0x0198)
+/*
+ * Interrupts, read only UMAL_DMAInterrupt
+ */
+#define UMAL_DMAInterrupt (PKUNITY_UMAL_BASE + 0x019c)
+
+/*
+ * Commands for UMAL_CFG1 register
+ */
+#define UMAL_CFG1_TXENABLE FIELD(1, 1, 0)
+#define UMAL_CFG1_RXENABLE FIELD(1, 1, 2)
+#define UMAL_CFG1_TXFLOWCTL FIELD(1, 1, 4)
+#define UMAL_CFG1_RXFLOWCTL FIELD(1, 1, 5)
+#define UMAL_CFG1_CONFLPBK FIELD(1, 1, 8)
+#define UMAL_CFG1_RESET FIELD(1, 1, 31)
+#define UMAL_CFG1_CONFFLCTL (MAC_TX_FLOW_CTL | MAC_RX_FLOW_CTL)
+
+/*
+ * Commands for UMAL_CFG2 register
+ */
+#define UMAL_CFG2_FULLDUPLEX FIELD(1, 1, 0)
+#define UMAL_CFG2_CRCENABLE FIELD(1, 1, 1)
+#define UMAL_CFG2_PADCRC FIELD(1, 1, 2)
+#define UMAL_CFG2_LENGTHCHECK FIELD(1, 1, 4)
+#define UMAL_CFG2_MODEMASK FMASK(2, 8)
+#define UMAL_CFG2_NIBBLEMODE FIELD(1, 2, 8)
+#define UMAL_CFG2_BYTEMODE FIELD(2, 2, 8)
+#define UMAL_CFG2_PREAMBLENMASK FMASK(4, 12)
+#define UMAL_CFG2_DEFPREAMBLEN FIELD(7, 4, 12)
+#define UMAL_CFG2_FD100 (UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_NIBBLEMODE \
+ | UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \
+ | UMAL_CFG2_CRCENABLE | UMAL_CFG2_FULLDUPLEX)
+#define UMAL_CFG2_FD1000 (UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_BYTEMODE \
+ | UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \
+ | UMAL_CFG2_CRCENABLE | UMAL_CFG2_FULLDUPLEX)
+#define UMAL_CFG2_HD100 (UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_NIBBLEMODE \
+ | UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \
+ | UMAL_CFG2_CRCENABLE)
+
+/*
+ * Command for UMAL_IFCTRL register
+ */
+#define UMAL_IFCTRL_RESET FIELD(1, 1, 31)
+
+/*
+ * Command for UMAL_MIICFG register
+ */
+#define UMAL_MIICFG_RESET FIELD(1, 1, 31)
+
+/*
+ * Command for UMAL_MIICMD register
+ */
+#define UMAL_MIICMD_READ FIELD(1, 1, 0)
+
+/*
+ * Command for UMAL_MIIIDCT register
+ */
+#define UMAL_MIIIDCT_BUSY FIELD(1, 1, 0)
+#define UMAL_MIIIDCT_NOTVALID FIELD(1, 1, 2)
+
+/*
+ * Commands for DMATxCtrl regesters
+ */
+#define UMAL_DMA_Enable FIELD(1, 1, 0)
+
+/*
+ * Commands for DMARxCtrl regesters
+ */
+#define UMAL_DMAIntrMask_ENABLEHALFWORD FIELD(1, 1, 16)
+
+/*
+ * Command for DMARxStatus
+ */
+#define CLR_RX_BUS_ERR FIELD(1, 1, 3)
+#define CLR_RX_OVERFLOW FIELD(1, 1, 2)
+#define CLR_RX_PKT FIELD(1, 1, 0)
+
+/*
+ * Command for DMATxStatus
+ */
+#define CLR_TX_BUS_ERR FIELD(1, 1, 3)
+#define CLR_TX_UNDERRUN FIELD(1, 1, 1)
+#define CLR_TX_PKT FIELD(1, 1, 0)
+
+/*
+ * Commands for DMAIntrMask and DMAInterrupt register
+ */
+#define INT_RX_MASK FIELD(0xd, 4, 4)
+#define INT_TX_MASK FIELD(0xb, 4, 0)
+
+#define INT_RX_BUS_ERR FIELD(1, 1, 7)
+#define INT_RX_OVERFLOW FIELD(1, 1, 6)
+#define INT_RX_PKT FIELD(1, 1, 4)
+#define INT_TX_BUS_ERR FIELD(1, 1, 3)
+#define INT_TX_UNDERRUN FIELD(1, 1, 1)
+#define INT_TX_PKT FIELD(1, 1, 0)
+
+/*
+ * MARCOS of UMAL's descriptors
+ */
+#define UMAL_DESC_PACKETSIZE_EMPTY FIELD(1, 1, 31)
+#define UMAL_DESC_PACKETSIZE_NONEMPTY FIELD(0, 1, 31)
+#define UMAL_DESC_PACKETSIZE_SIZEMASK FMASK(12, 0)
+
diff --git a/arch/unicore32/include/mach/regs-unigfx.h b/arch/unicore32/include/mach/regs-unigfx.h
new file mode 100644
index 00000000000..faf8b287fcc
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-unigfx.h
@@ -0,0 +1,200 @@
+/*
+ * PKUnity UNIGFX Registers
+ */
+
+#define UDE_BASE (PKUNITY_UNIGFX_BASE + 0x1400)
+#define UGE_BASE (PKUNITY_UNIGFX_BASE + 0x0000)
+
+/*
+ * command reg for UNIGFX DE
+ */
+/*
+ * control reg UDE_CFG
+ */
+#define UDE_CFG (UDE_BASE + 0x0000)
+/*
+ * framebuffer start address reg UDE_FSA
+ */
+#define UDE_FSA (UDE_BASE + 0x0004)
+/*
+ * line size reg UDE_LS
+ */
+#define UDE_LS (UDE_BASE + 0x0008)
+/*
+ * pitch size reg UDE_PS
+ */
+#define UDE_PS (UDE_BASE + 0x000C)
+/*
+ * horizontal active time reg UDE_HAT
+ */
+#define UDE_HAT (UDE_BASE + 0x0010)
+/*
+ * horizontal blank time reg UDE_HBT
+ */
+#define UDE_HBT (UDE_BASE + 0x0014)
+/*
+ * horizontal sync time reg UDE_HST
+ */
+#define UDE_HST (UDE_BASE + 0x0018)
+/*
+ * vertival active time reg UDE_VAT
+ */
+#define UDE_VAT (UDE_BASE + 0x001C)
+/*
+ * vertival blank time reg UDE_VBT
+ */
+#define UDE_VBT (UDE_BASE + 0x0020)
+/*
+ * vertival sync time reg UDE_VST
+ */
+#define UDE_VST (UDE_BASE + 0x0024)
+/*
+ * cursor position UDE_CXY
+ */
+#define UDE_CXY (UDE_BASE + 0x0028)
+/*
+ * cursor front color UDE_CC0
+ */
+#define UDE_CC0 (UDE_BASE + 0x002C)
+/*
+ * cursor background color UDE_CC1
+ */
+#define UDE_CC1 (UDE_BASE + 0x0030)
+/*
+ * video position UDE_VXY
+ */
+#define UDE_VXY (UDE_BASE + 0x0034)
+/*
+ * video start address reg UDE_VSA
+ */
+#define UDE_VSA (UDE_BASE + 0x0040)
+/*
+ * video size reg UDE_VS
+ */
+#define UDE_VS (UDE_BASE + 0x004C)
+
+/*
+ * command reg for UNIGFX GE
+ */
+/*
+ * src xy reg UGE_SRCXY
+ */
+#define UGE_SRCXY (UGE_BASE + 0x0000)
+/*
+ * dst xy reg UGE_DSTXY
+ */
+#define UGE_DSTXY (UGE_BASE + 0x0004)
+/*
+ * pitch reg UGE_PITCH
+ */
+#define UGE_PITCH (UGE_BASE + 0x0008)
+/*
+ * src start reg UGE_SRCSTART
+ */
+#define UGE_SRCSTART (UGE_BASE + 0x000C)
+/*
+ * dst start reg UGE_DSTSTART
+ */
+#define UGE_DSTSTART (UGE_BASE + 0x0010)
+/*
+ * width height reg UGE_WIDHEIGHT
+ */
+#define UGE_WIDHEIGHT (UGE_BASE + 0x0014)
+/*
+ * rop alpah reg UGE_ROPALPHA
+ */
+#define UGE_ROPALPHA (UGE_BASE + 0x0018)
+/*
+ * front color UGE_FCOLOR
+ */
+#define UGE_FCOLOR (UGE_BASE + 0x001C)
+/*
+ * background color UGE_BCOLOR
+ */
+#define UGE_BCOLOR (UGE_BASE + 0x0020)
+/*
+ * src color key for high value UGE_SCH
+ */
+#define UGE_SCH (UGE_BASE + 0x0024)
+/*
+ * dst color key for high value UGE_DCH
+ */
+#define UGE_DCH (UGE_BASE + 0x0028)
+/*
+ * src color key for low value UGE_SCL
+ */
+#define UGE_SCL (UGE_BASE + 0x002C)
+/*
+ * dst color key for low value UGE_DCL
+ */
+#define UGE_DCL (UGE_BASE + 0x0030)
+/*
+ * clip 0 reg UGE_CLIP0
+ */
+#define UGE_CLIP0 (UGE_BASE + 0x0034)
+/*
+ * clip 1 reg UGE_CLIP1
+ */
+#define UGE_CLIP1 (UGE_BASE + 0x0038)
+/*
+ * command reg UGE_COMMAND
+ */
+#define UGE_COMMAND (UGE_BASE + 0x003C)
+/*
+ * pattern 0 UGE_P0
+ */
+#define UGE_P0 (UGE_BASE + 0x0040)
+#define UGE_P1 (UGE_BASE + 0x0044)
+#define UGE_P2 (UGE_BASE + 0x0048)
+#define UGE_P3 (UGE_BASE + 0x004C)
+#define UGE_P4 (UGE_BASE + 0x0050)
+#define UGE_P5 (UGE_BASE + 0x0054)
+#define UGE_P6 (UGE_BASE + 0x0058)
+#define UGE_P7 (UGE_BASE + 0x005C)
+#define UGE_P8 (UGE_BASE + 0x0060)
+#define UGE_P9 (UGE_BASE + 0x0064)
+#define UGE_P10 (UGE_BASE + 0x0068)
+#define UGE_P11 (UGE_BASE + 0x006C)
+#define UGE_P12 (UGE_BASE + 0x0070)
+#define UGE_P13 (UGE_BASE + 0x0074)
+#define UGE_P14 (UGE_BASE + 0x0078)
+#define UGE_P15 (UGE_BASE + 0x007C)
+#define UGE_P16 (UGE_BASE + 0x0080)
+#define UGE_P17 (UGE_BASE + 0x0084)
+#define UGE_P18 (UGE_BASE + 0x0088)
+#define UGE_P19 (UGE_BASE + 0x008C)
+#define UGE_P20 (UGE_BASE + 0x0090)
+#define UGE_P21 (UGE_BASE + 0x0094)
+#define UGE_P22 (UGE_BASE + 0x0098)
+#define UGE_P23 (UGE_BASE + 0x009C)
+#define UGE_P24 (UGE_BASE + 0x00A0)
+#define UGE_P25 (UGE_BASE + 0x00A4)
+#define UGE_P26 (UGE_BASE + 0x00A8)
+#define UGE_P27 (UGE_BASE + 0x00AC)
+#define UGE_P28 (UGE_BASE + 0x00B0)
+#define UGE_P29 (UGE_BASE + 0x00B4)
+#define UGE_P30 (UGE_BASE + 0x00B8)
+#define UGE_P31 (UGE_BASE + 0x00BC)
+
+#define UDE_CFG_DST_MASK FMASK(2, 8)
+#define UDE_CFG_DST8 FIELD(0x0, 2, 8)
+#define UDE_CFG_DST16 FIELD(0x1, 2, 8)
+#define UDE_CFG_DST24 FIELD(0x2, 2, 8)
+#define UDE_CFG_DST32 FIELD(0x3, 2, 8)
+
+/*
+ * GDEN enable UDE_CFG_GDEN_ENABLE
+ */
+#define UDE_CFG_GDEN_ENABLE FIELD(1, 1, 3)
+/*
+ * VDEN enable UDE_CFG_VDEN_ENABLE
+ */
+#define UDE_CFG_VDEN_ENABLE FIELD(1, 1, 4)
+/*
+ * CDEN enable UDE_CFG_CDEN_ENABLE
+ */
+#define UDE_CFG_CDEN_ENABLE FIELD(1, 1, 5)
+/*
+ * TIMEUP enable UDE_CFG_TIMEUP_ENABLE
+ */
+#define UDE_CFG_TIMEUP_ENABLE FIELD(1, 1, 6)
diff --git a/arch/unicore32/include/mach/uncompress.h b/arch/unicore32/include/mach/uncompress.h
new file mode 100644
index 00000000000..142d3e7958a
--- /dev/null
+++ b/arch/unicore32/include/mach/uncompress.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/unicore32/include/mach/uncompress.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_PUV3_UNCOMPRESS_H__
+#define __MACH_PUV3_UNCOMPRESS_H__
+
+#include "hardware.h"
+#include "ocd.h"
+
+extern char input_data[];
+extern char input_data_end[];
+
+static void arch_decomp_puts(const char *ptr)
+{
+ char c;
+
+ while ((c = *ptr++) != '\0') {
+ if (c == '\n')
+ putc('\r');
+ putc(c);
+ }
+}
+#define ARCH_HAVE_DECOMP_PUTS
+
+#endif /* __MACH_PUV3_UNCOMPRESS_H__ */
diff --git a/arch/unicore32/kernel/Makefile b/arch/unicore32/kernel/Makefile
new file mode 100644
index 00000000000..ec23a2fb2f5
--- /dev/null
+++ b/arch/unicore32/kernel/Makefile
@@ -0,0 +1,33 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+obj-y := dma.o elf.o entry.o process.o ptrace.o
+obj-y += setup.o signal.o sys.o stacktrace.o traps.o
+
+obj-$(CONFIG_MODULES) += ksyms.o module.o
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-$(CONFIG_CPU_FREQ) += cpu-ucv2.o
+obj-$(CONFIG_UNICORE_FPU_F64) += fpu-ucf64.o
+
+# obj-y for architecture PKUnity v3
+obj-$(CONFIG_ARCH_PUV3) += clock.o irq.o time.o
+
+obj-$(CONFIG_PUV3_GPIO) += gpio.o
+obj-$(CONFIG_PUV3_RTC) += rtc.o
+obj-$(CONFIG_PUV3_PWM) += pwm.o
+obj-$(CONFIG_PUV3_PM) += pm.o sleep.o
+obj-$(CONFIG_HIBERNATION) += hibernate.o hibernate_asm.o
+
+obj-$(CONFIG_PCI) += pci.o
+
+# obj-y for specific machines
+obj-$(CONFIG_ARCH_PUV3) += puv3-core.o
+obj-$(CONFIG_PUV3_NB0916) += puv3-nb0916.o
+
+head-y := head.o
+obj-$(CONFIG_DEBUG_LL) += debug.o
+
+extra-y := $(head-y) init_task.o vmlinux.lds
diff --git a/arch/unicore32/kernel/asm-offsets.c b/arch/unicore32/kernel/asm-offsets.c
new file mode 100644
index 00000000000..ffcbe7536ca
--- /dev/null
+++ b/arch/unicore32/kernel/asm-offsets.c
@@ -0,0 +1,112 @@
+/*
+ * linux/arch/unicore32/kernel/asm-offsets.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed to extract
+ * and format the required data.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/kbuild.h>
+#include <linux/suspend.h>
+#include <linux/thread_info.h>
+#include <asm/memory.h>
+#include <asm/suspend.h>
+
+/*
+ * GCC 3.0, 3.1: general bad code generation.
+ * GCC 3.2.0: incorrect function argument offset calculation.
+ * GCC 3.2.x: miscompiles NEW_AUX_ENT in fs/binfmt_elf.c
+ * (http://gcc.gnu.org/PR8896) and incorrect structure
+ * initialisation in fs/jffs2/erase.c
+ */
+#if (__GNUC__ < 4)
+#error Your compiler should upgrade to uc4
+#error Known good compilers: 4.2.2
+#endif
+
+int main(void)
+{
+ DEFINE(TSK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+ BLANK();
+ DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+ DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
+ DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
+ DEFINE(TI_TASK, offsetof(struct thread_info, task));
+ DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain));
+ DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+ DEFINE(TI_CPU_SAVE, offsetof(struct thread_info, cpu_context));
+ DEFINE(TI_USED_CP, offsetof(struct thread_info, used_cp));
+#ifdef CONFIG_UNICORE_FPU_F64
+ DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate));
+#endif
+ BLANK();
+ DEFINE(S_R0, offsetof(struct pt_regs, UCreg_00));
+ DEFINE(S_R1, offsetof(struct pt_regs, UCreg_01));
+ DEFINE(S_R2, offsetof(struct pt_regs, UCreg_02));
+ DEFINE(S_R3, offsetof(struct pt_regs, UCreg_03));
+ DEFINE(S_R4, offsetof(struct pt_regs, UCreg_04));
+ DEFINE(S_R5, offsetof(struct pt_regs, UCreg_05));
+ DEFINE(S_R6, offsetof(struct pt_regs, UCreg_06));
+ DEFINE(S_R7, offsetof(struct pt_regs, UCreg_07));
+ DEFINE(S_R8, offsetof(struct pt_regs, UCreg_08));
+ DEFINE(S_R9, offsetof(struct pt_regs, UCreg_09));
+ DEFINE(S_R10, offsetof(struct pt_regs, UCreg_10));
+ DEFINE(S_R11, offsetof(struct pt_regs, UCreg_11));
+ DEFINE(S_R12, offsetof(struct pt_regs, UCreg_12));
+ DEFINE(S_R13, offsetof(struct pt_regs, UCreg_13));
+ DEFINE(S_R14, offsetof(struct pt_regs, UCreg_14));
+ DEFINE(S_R15, offsetof(struct pt_regs, UCreg_15));
+ DEFINE(S_R16, offsetof(struct pt_regs, UCreg_16));
+ DEFINE(S_R17, offsetof(struct pt_regs, UCreg_17));
+ DEFINE(S_R18, offsetof(struct pt_regs, UCreg_18));
+ DEFINE(S_R19, offsetof(struct pt_regs, UCreg_19));
+ DEFINE(S_R20, offsetof(struct pt_regs, UCreg_20));
+ DEFINE(S_R21, offsetof(struct pt_regs, UCreg_21));
+ DEFINE(S_R22, offsetof(struct pt_regs, UCreg_22));
+ DEFINE(S_R23, offsetof(struct pt_regs, UCreg_23));
+ DEFINE(S_R24, offsetof(struct pt_regs, UCreg_24));
+ DEFINE(S_R25, offsetof(struct pt_regs, UCreg_25));
+ DEFINE(S_R26, offsetof(struct pt_regs, UCreg_26));
+ DEFINE(S_FP, offsetof(struct pt_regs, UCreg_fp));
+ DEFINE(S_IP, offsetof(struct pt_regs, UCreg_ip));
+ DEFINE(S_SP, offsetof(struct pt_regs, UCreg_sp));
+ DEFINE(S_LR, offsetof(struct pt_regs, UCreg_lr));
+ DEFINE(S_PC, offsetof(struct pt_regs, UCreg_pc));
+ DEFINE(S_PSR, offsetof(struct pt_regs, UCreg_asr));
+ DEFINE(S_OLD_R0, offsetof(struct pt_regs, UCreg_ORIG_00));
+ DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs));
+ BLANK();
+ DEFINE(VMA_VM_MM, offsetof(struct vm_area_struct, vm_mm));
+ DEFINE(VMA_VM_FLAGS, offsetof(struct vm_area_struct, vm_flags));
+ BLANK();
+ DEFINE(VM_EXEC, VM_EXEC);
+ BLANK();
+ DEFINE(PAGE_SZ, PAGE_SIZE);
+ BLANK();
+ DEFINE(SYS_ERROR0, 0x9f0000);
+ BLANK();
+ DEFINE(PBE_ADDRESS, offsetof(struct pbe, address));
+ DEFINE(PBE_ORIN_ADDRESS, offsetof(struct pbe, orig_address));
+ DEFINE(PBE_NEXT, offsetof(struct pbe, next));
+ DEFINE(SWSUSP_CPU, offsetof(struct swsusp_arch_regs, \
+ cpu_context));
+#ifdef CONFIG_UNICORE_FPU_F64
+ DEFINE(SWSUSP_FPSTATE, offsetof(struct swsusp_arch_regs, \
+ fpstate));
+#endif
+ BLANK();
+ DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
+ DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE);
+ DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE);
+ return 0;
+}
diff --git a/arch/unicore32/kernel/clock.c b/arch/unicore32/kernel/clock.c
new file mode 100644
index 00000000000..18d4563e6fa
--- /dev/null
+++ b/arch/unicore32/kernel/clock.c
@@ -0,0 +1,390 @@
+/*
+ * linux/arch/unicore32/kernel/clock.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+/*
+ * Very simple clock implementation
+ */
+struct clk {
+ struct list_head node;
+ unsigned long rate;
+ const char *name;
+};
+
+static struct clk clk_ost_clk = {
+ .name = "OST_CLK",
+ .rate = CLOCK_TICK_RATE,
+};
+
+static struct clk clk_mclk_clk = {
+ .name = "MAIN_CLK",
+};
+
+static struct clk clk_bclk32_clk = {
+ .name = "BUS32_CLK",
+};
+
+static struct clk clk_ddr_clk = {
+ .name = "DDR_CLK",
+};
+
+static struct clk clk_vga_clk = {
+ .name = "VGA_CLK",
+};
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+ mutex_lock(&clocks_mutex);
+ list_for_each_entry(p, &clocks, node) {
+ if (strcmp(id, p->name) == 0) {
+ clk = p;
+ break;
+ }
+ }
+ mutex_unlock(&clocks_mutex);
+
+ return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+struct {
+ unsigned long rate;
+ unsigned long cfg;
+ unsigned long div;
+} vga_clk_table[] = {
+ {.rate = 25175000, .cfg = 0x00002001, .div = 0x9},
+ {.rate = 31500000, .cfg = 0x00002001, .div = 0x7},
+ {.rate = 40000000, .cfg = 0x00003801, .div = 0x9},
+ {.rate = 49500000, .cfg = 0x00003801, .div = 0x7},
+ {.rate = 65000000, .cfg = 0x00002c01, .div = 0x4},
+ {.rate = 78750000, .cfg = 0x00002400, .div = 0x7},
+ {.rate = 108000000, .cfg = 0x00002c01, .div = 0x2},
+ {.rate = 106500000, .cfg = 0x00003c01, .div = 0x3},
+ {.rate = 50650000, .cfg = 0x00106400, .div = 0x9},
+ {.rate = 61500000, .cfg = 0x00106400, .div = 0xa},
+ {.rate = 85500000, .cfg = 0x00002800, .div = 0x6},
+};
+
+struct {
+ unsigned long mrate;
+ unsigned long prate;
+} mclk_clk_table[] = {
+ {.mrate = 500000000, .prate = 0x00109801},
+ {.mrate = 525000000, .prate = 0x00104C00},
+ {.mrate = 550000000, .prate = 0x00105000},
+ {.mrate = 575000000, .prate = 0x00105400},
+ {.mrate = 600000000, .prate = 0x00105800},
+ {.mrate = 625000000, .prate = 0x00105C00},
+ {.mrate = 650000000, .prate = 0x00106000},
+ {.mrate = 675000000, .prate = 0x00106400},
+ {.mrate = 700000000, .prate = 0x00106800},
+ {.mrate = 725000000, .prate = 0x00106C00},
+ {.mrate = 750000000, .prate = 0x00107000},
+ {.mrate = 775000000, .prate = 0x00107400},
+ {.mrate = 800000000, .prate = 0x00107800},
+};
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk == &clk_vga_clk) {
+ unsigned long pll_vgacfg, pll_vgadiv;
+ int ret, i;
+
+ /* lookup vga_clk_table */
+ ret = -EINVAL;
+ for (i = 0; i < ARRAY_SIZE(vga_clk_table); i++) {
+ if (rate == vga_clk_table[i].rate) {
+ pll_vgacfg = vga_clk_table[i].cfg;
+ pll_vgadiv = vga_clk_table[i].div;
+ ret = 0;
+ break;
+ }
+ }
+
+ if (ret)
+ return ret;
+
+ if (readl(PM_PLLVGACFG) == pll_vgacfg)
+ return 0;
+
+ /* set pll vga cfg reg. */
+ writel(pll_vgacfg, PM_PLLVGACFG);
+
+ writel(PM_PMCR_CFBVGA, PM_PMCR);
+ while ((readl(PM_PLLDFCDONE) & PM_PLLDFCDONE_VGADFC)
+ != PM_PLLDFCDONE_VGADFC)
+ udelay(100); /* about 1ms */
+
+ /* set div cfg reg. */
+ writel(readl(PM_PCGR) | PM_PCGR_VGACLK, PM_PCGR);
+
+ writel((readl(PM_DIVCFG) & ~PM_DIVCFG_VGACLK_MASK)
+ | PM_DIVCFG_VGACLK(pll_vgadiv), PM_DIVCFG);
+
+ writel(readl(PM_SWRESET) | PM_SWRESET_VGADIV, PM_SWRESET);
+ while ((readl(PM_SWRESET) & PM_SWRESET_VGADIV)
+ == PM_SWRESET_VGADIV)
+ udelay(100); /* 65536 bclk32, about 320us */
+
+ writel(readl(PM_PCGR) & ~PM_PCGR_VGACLK, PM_PCGR);
+ }
+#ifdef CONFIG_CPU_FREQ
+ if (clk == &clk_mclk_clk) {
+ u32 pll_rate, divstatus = PM_DIVSTATUS;
+ int ret, i;
+
+ /* lookup mclk_clk_table */
+ ret = -EINVAL;
+ for (i = 0; i < ARRAY_SIZE(mclk_clk_table); i++) {
+ if (rate == mclk_clk_table[i].mrate) {
+ pll_rate = mclk_clk_table[i].prate;
+ clk_mclk_clk.rate = mclk_clk_table[i].mrate;
+ ret = 0;
+ break;
+ }
+ }
+
+ if (ret)
+ return ret;
+
+ if (clk_mclk_clk.rate)
+ clk_bclk32_clk.rate = clk_mclk_clk.rate
+ / (((divstatus & 0x0000f000) >> 12) + 1);
+
+ /* set pll sys cfg reg. */
+ PM_PLLSYSCFG = pll_rate;
+
+ PM_PMCR = PM_PMCR_CFBSYS;
+ while ((PM_PLLDFCDONE & PM_PLLDFCDONE_SYSDFC)
+ != PM_PLLDFCDONE_SYSDFC)
+ udelay(100);
+ /* about 1ms */
+ }
+#endif
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_register(struct clk *clk)
+{
+ mutex_lock(&clocks_mutex);
+ list_add(&clk->node, &clocks);
+ mutex_unlock(&clocks_mutex);
+ printk(KERN_DEFAULT "PKUnity PM: %s %lu.%02luM\n", clk->name,
+ (clk->rate)/1000000, (clk->rate)/10000 % 100);
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+ mutex_lock(&clocks_mutex);
+ list_del(&clk->node);
+ mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+struct {
+ unsigned long prate;
+ unsigned long rate;
+} pllrate_table[] = {
+ {.prate = 0x00002001, .rate = 250000000},
+ {.prate = 0x00104801, .rate = 250000000},
+ {.prate = 0x00104C01, .rate = 262500000},
+ {.prate = 0x00002401, .rate = 275000000},
+ {.prate = 0x00105001, .rate = 275000000},
+ {.prate = 0x00105401, .rate = 287500000},
+ {.prate = 0x00002801, .rate = 300000000},
+ {.prate = 0x00105801, .rate = 300000000},
+ {.prate = 0x00105C01, .rate = 312500000},
+ {.prate = 0x00002C01, .rate = 325000000},
+ {.prate = 0x00106001, .rate = 325000000},
+ {.prate = 0x00106401, .rate = 337500000},
+ {.prate = 0x00003001, .rate = 350000000},
+ {.prate = 0x00106801, .rate = 350000000},
+ {.prate = 0x00106C01, .rate = 362500000},
+ {.prate = 0x00003401, .rate = 375000000},
+ {.prate = 0x00107001, .rate = 375000000},
+ {.prate = 0x00107401, .rate = 387500000},
+ {.prate = 0x00003801, .rate = 400000000},
+ {.prate = 0x00107801, .rate = 400000000},
+ {.prate = 0x00107C01, .rate = 412500000},
+ {.prate = 0x00003C01, .rate = 425000000},
+ {.prate = 0x00108001, .rate = 425000000},
+ {.prate = 0x00108401, .rate = 437500000},
+ {.prate = 0x00004001, .rate = 450000000},
+ {.prate = 0x00108801, .rate = 450000000},
+ {.prate = 0x00108C01, .rate = 462500000},
+ {.prate = 0x00004401, .rate = 475000000},
+ {.prate = 0x00109001, .rate = 475000000},
+ {.prate = 0x00109401, .rate = 487500000},
+ {.prate = 0x00004801, .rate = 500000000},
+ {.prate = 0x00109801, .rate = 500000000},
+ {.prate = 0x00104C00, .rate = 525000000},
+ {.prate = 0x00002400, .rate = 550000000},
+ {.prate = 0x00105000, .rate = 550000000},
+ {.prate = 0x00105400, .rate = 575000000},
+ {.prate = 0x00002800, .rate = 600000000},
+ {.prate = 0x00105800, .rate = 600000000},
+ {.prate = 0x00105C00, .rate = 625000000},
+ {.prate = 0x00002C00, .rate = 650000000},
+ {.prate = 0x00106000, .rate = 650000000},
+ {.prate = 0x00106400, .rate = 675000000},
+ {.prate = 0x00003000, .rate = 700000000},
+ {.prate = 0x00106800, .rate = 700000000},
+ {.prate = 0x00106C00, .rate = 725000000},
+ {.prate = 0x00003400, .rate = 750000000},
+ {.prate = 0x00107000, .rate = 750000000},
+ {.prate = 0x00107400, .rate = 775000000},
+ {.prate = 0x00003800, .rate = 800000000},
+ {.prate = 0x00107800, .rate = 800000000},
+ {.prate = 0x00107C00, .rate = 825000000},
+ {.prate = 0x00003C00, .rate = 850000000},
+ {.prate = 0x00108000, .rate = 850000000},
+ {.prate = 0x00108400, .rate = 875000000},
+ {.prate = 0x00004000, .rate = 900000000},
+ {.prate = 0x00108800, .rate = 900000000},
+ {.prate = 0x00108C00, .rate = 925000000},
+ {.prate = 0x00004400, .rate = 950000000},
+ {.prate = 0x00109000, .rate = 950000000},
+ {.prate = 0x00109400, .rate = 975000000},
+ {.prate = 0x00004800, .rate = 1000000000},
+ {.prate = 0x00109800, .rate = 1000000000},
+};
+
+struct {
+ unsigned long prate;
+ unsigned long drate;
+} pddr_table[] = {
+ {.prate = 0x00100800, .drate = 44236800},
+ {.prate = 0x00100C00, .drate = 66355200},
+ {.prate = 0x00101000, .drate = 88473600},
+ {.prate = 0x00101400, .drate = 110592000},
+ {.prate = 0x00101800, .drate = 132710400},
+ {.prate = 0x00101C01, .drate = 154828800},
+ {.prate = 0x00102001, .drate = 176947200},
+ {.prate = 0x00102401, .drate = 199065600},
+ {.prate = 0x00102801, .drate = 221184000},
+ {.prate = 0x00102C01, .drate = 243302400},
+ {.prate = 0x00103001, .drate = 265420800},
+ {.prate = 0x00103401, .drate = 287539200},
+ {.prate = 0x00103801, .drate = 309657600},
+ {.prate = 0x00103C01, .drate = 331776000},
+ {.prate = 0x00104001, .drate = 353894400},
+};
+
+static int __init clk_init(void)
+{
+#ifdef CONFIG_PUV3_PM
+ u32 pllrate, divstatus = readl(PM_DIVSTATUS);
+ u32 pcgr_val = readl(PM_PCGR);
+ int i;
+
+ pcgr_val |= PM_PCGR_BCLKMME | PM_PCGR_BCLKH264E | PM_PCGR_BCLKH264D
+ | PM_PCGR_HECLK | PM_PCGR_HDCLK;
+ writel(pcgr_val, PM_PCGR);
+
+ pllrate = readl(PM_PLLSYSSTATUS);
+
+ /* lookup pmclk_table */
+ clk_mclk_clk.rate = 0;
+ for (i = 0; i < ARRAY_SIZE(pllrate_table); i++) {
+ if (pllrate == pllrate_table[i].prate) {
+ clk_mclk_clk.rate = pllrate_table[i].rate;
+ break;
+ }
+ }
+
+ if (clk_mclk_clk.rate)
+ clk_bclk32_clk.rate = clk_mclk_clk.rate /
+ (((divstatus & 0x0000f000) >> 12) + 1);
+
+ pllrate = readl(PM_PLLDDRSTATUS);
+
+ /* lookup pddr_table */
+ clk_ddr_clk.rate = 0;
+ for (i = 0; i < ARRAY_SIZE(pddr_table); i++) {
+ if (pllrate == pddr_table[i].prate) {
+ clk_ddr_clk.rate = pddr_table[i].drate;
+ break;
+ }
+ }
+
+ pllrate = readl(PM_PLLVGASTATUS);
+
+ /* lookup pvga_table */
+ clk_vga_clk.rate = 0;
+ for (i = 0; i < ARRAY_SIZE(pllrate_table); i++) {
+ if (pllrate == pllrate_table[i].prate) {
+ clk_vga_clk.rate = pllrate_table[i].rate;
+ break;
+ }
+ }
+
+ if (clk_vga_clk.rate)
+ clk_vga_clk.rate = clk_vga_clk.rate /
+ (((divstatus & 0x00f00000) >> 20) + 1);
+
+ clk_register(&clk_vga_clk);
+#endif
+#ifdef CONFIG_ARCH_FPGA
+ clk_ddr_clk.rate = 33000000;
+ clk_mclk_clk.rate = 33000000;
+ clk_bclk32_clk.rate = 33000000;
+#endif
+ clk_register(&clk_ddr_clk);
+ clk_register(&clk_mclk_clk);
+ clk_register(&clk_bclk32_clk);
+ clk_register(&clk_ost_clk);
+ return 0;
+}
+core_initcall(clk_init);
diff --git a/arch/unicore32/kernel/cpu-ucv2.c b/arch/unicore32/kernel/cpu-ucv2.c
new file mode 100644
index 00000000000..4a99f62584c
--- /dev/null
+++ b/arch/unicore32/kernel/cpu-ucv2.c
@@ -0,0 +1,93 @@
+/*
+ * linux/arch/unicore32/kernel/cpu-ucv2.c: clock scaling for the UniCore-II
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+
+#include <mach/hardware.h>
+
+static struct cpufreq_driver ucv2_driver;
+
+/* make sure that only the "userspace" governor is run
+ * -- anything else wouldn't make sense on this platform, anyway.
+ */
+int ucv2_verify_speed(struct cpufreq_policy *policy)
+{
+ if (policy->cpu)
+ return -EINVAL;
+
+ cpufreq_verify_within_limits(policy,
+ policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
+
+ return 0;
+}
+
+static unsigned int ucv2_getspeed(unsigned int cpu)
+{
+ struct clk *mclk = clk_get(NULL, "MAIN_CLK");
+
+ if (cpu)
+ return 0;
+ return clk_get_rate(mclk)/1000;
+}
+
+static int ucv2_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int cur = ucv2_getspeed(0);
+ struct cpufreq_freqs freqs;
+ struct clk *mclk = clk_get(NULL, "MAIN_CLK");
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ if (!clk_set_rate(mclk, target_freq * 1000)) {
+ freqs.old = cur;
+ freqs.new = target_freq;
+ freqs.cpu = 0;
+ }
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return 0;
+}
+
+static int __init ucv2_cpu_init(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -EINVAL;
+ policy->cur = ucv2_getspeed(0);
+ policy->min = policy->cpuinfo.min_freq = 250000;
+ policy->max = policy->cpuinfo.max_freq = 1000000;
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ return 0;
+}
+
+static struct cpufreq_driver ucv2_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = ucv2_verify_speed,
+ .target = ucv2_target,
+ .get = ucv2_getspeed,
+ .init = ucv2_cpu_init,
+ .name = "UniCore-II",
+};
+
+static int __init ucv2_cpufreq_init(void)
+{
+ return cpufreq_register_driver(&ucv2_driver);
+}
+
+arch_initcall(ucv2_cpufreq_init);
diff --git a/arch/unicore32/kernel/debug-macro.S b/arch/unicore32/kernel/debug-macro.S
new file mode 100644
index 00000000000..2711d6d87d8
--- /dev/null
+++ b/arch/unicore32/kernel/debug-macro.S
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/unicore32/kernel/debug-macro.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Debugging macro include header
+ */
+#include <generated/asm-offsets.h>
+#include <mach/hardware.h>
+
+ .macro put_word_ocd, rd, rx=r16
+1001: movc \rx, p1.c0, #0
+ cand.a \rx, #2
+ bne 1001b
+ movc p1.c1, \rd, #1
+ .endm
+
+#ifdef CONFIG_DEBUG_OCD
+ /* debug using UniCore On-Chip-Debugger */
+ .macro addruart, rx
+ .endm
+
+ .macro senduart, rd, rx
+ put_word_ocd \rd, \rx
+ .endm
+
+ .macro busyuart, rd, rx
+ .endm
+
+ .macro waituart, rd, rx
+ .endm
+#else
+#define UART_CLK_DEFAULT 3686400 * 20
+ /* Uartclk = MCLK/ 2, The MCLK on my board is 3686400 * 40 */
+#define BAUD_RATE_DEFAULT 115200
+ /* The baud rate of the serial port */
+
+#define UART_DIVISOR_DEFAULT (UART_CLK_DEFAULT \
+ / (16 * BAUD_RATE_DEFAULT) - 1)
+
+ .macro addruart,rx
+ mrc p0, #0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0xee000000 @ physical base address
+ movne \rx, #0x6e000000 @ virtual address
+
+ @ We probe for the active serial port here
+ @ However, now we assume UART0 is active: epip4d
+ @ We assume r1 and r2 can be clobbered.
+
+ movl r2, #UART_DIVISOR_DEFAULT
+ mov r1, #0x80
+ str r1, [\rx, #UART_LCR_OFFSET]
+ and r1, r2, #0xff00
+ mov r1, r1, lsr #8
+ str r1, [\rx, #UART_DLH_OFFSET]
+ and r1, r2, #0xff
+ str r1, [\rx, #UART_DLL_OFFSET]
+ mov r1, #0x7
+ str r1, [\rx, #UART_FCR_OFFSET]
+ mov r1, #0x3
+ str r1, [\rx, #UART_LCR_OFFSET]
+ mov r1, #0x0
+ str r1, [\rx, #UART_IER_OFFSET]
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UART_THR_OFFSET]
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #UART_LSR_OFFSET]
+ tst \rd, #UART_LSR_THRE
+ beq 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #UART_LSR_OFFSET]
+ tst \rd, #UART_LSR_TEMT
+ bne 1001b
+ .endm
+#endif
+
diff --git a/arch/unicore32/kernel/debug.S b/arch/unicore32/kernel/debug.S
new file mode 100644
index 00000000000..029fd12f6ab
--- /dev/null
+++ b/arch/unicore32/kernel/debug.S
@@ -0,0 +1,85 @@
+/*
+ * linux/arch/unicore32/kernel/debug.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * 32-bit debugging code
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ .text
+
+/*
+ * Some debugging routines (useful if you've got MM problems and
+ * printk isn't working). For DEBUGGING ONLY!!! Do not leave
+ * references to these in a production kernel!
+ */
+#include "debug-macro.S"
+
+/*
+ * Useful debugging routines
+ */
+ENTRY(printhex8)
+ mov r1, #8
+ b printhex
+ENDPROC(printhex8)
+
+ENTRY(printhex4)
+ mov r1, #4
+ b printhex
+ENDPROC(printhex4)
+
+ENTRY(printhex2)
+ mov r1, #2
+printhex: adr r2, hexbuf
+ add r3, r2, r1
+ mov r1, #0
+ stb r1, [r3]
+1: and r1, r0, #15
+ mov r0, r0 >> #4
+ csub.a r1, #10
+ beg 2f
+ add r1, r1, #'0' - 'a' + 10
+2: add r1, r1, #'a' - 10
+ stb.w r1, [r3+], #-1
+ cxor.a r3, r2
+ bne 1b
+ mov r0, r2
+ b printascii
+ENDPROC(printhex2)
+
+ .ltorg
+
+ENTRY(printascii)
+ addruart r3
+ b 2f
+1: waituart r2, r3
+ senduart r1, r3
+ busyuart r2, r3
+ cxor.a r1, #'\n'
+ cmoveq r1, #'\r'
+ beq 1b
+2: cxor.a r0, #0
+ beq 3f
+ ldb.w r1, [r0]+, #1
+ cxor.a r1, #0
+ bne 1b
+3: mov pc, lr
+ENDPROC(printascii)
+
+ENTRY(printch)
+ addruart r3
+ mov r1, r0
+ mov r0, #0
+ b 1b
+ENDPROC(printch)
+
+hexbuf: .space 16
+
diff --git a/arch/unicore32/kernel/dma.c b/arch/unicore32/kernel/dma.c
new file mode 100644
index 00000000000..ae441bc3122
--- /dev/null
+++ b/arch/unicore32/kernel/dma.c
@@ -0,0 +1,183 @@
+/*
+ * linux/arch/unicore32/kernel/dma.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+
+struct dma_channel {
+ char *name;
+ puv3_dma_prio prio;
+ void (*irq_handler)(int, void *);
+ void (*err_handler)(int, void *);
+ void *data;
+};
+
+static struct dma_channel dma_channels[MAX_DMA_CHANNELS];
+
+int puv3_request_dma(char *name, puv3_dma_prio prio,
+ void (*irq_handler)(int, void *),
+ void (*err_handler)(int, void *),
+ void *data)
+{
+ unsigned long flags;
+ int i, found = 0;
+
+ /* basic sanity checks */
+ if (!name)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ do {
+ /* try grabbing a DMA channel with the requested priority */
+ for (i = 0; i < MAX_DMA_CHANNELS; i++) {
+ if ((dma_channels[i].prio == prio) &&
+ !dma_channels[i].name) {
+ found = 1;
+ break;
+ }
+ }
+ /* if requested prio group is full, try a hier priority */
+ } while (!found && prio--);
+
+ if (found) {
+ dma_channels[i].name = name;
+ dma_channels[i].irq_handler = irq_handler;
+ dma_channels[i].err_handler = err_handler;
+ dma_channels[i].data = data;
+ } else {
+ printk(KERN_WARNING "No more available DMA channels for %s\n",
+ name);
+ i = -ENODEV;
+ }
+
+ local_irq_restore(flags);
+ return i;
+}
+EXPORT_SYMBOL(puv3_request_dma);
+
+void puv3_free_dma(int dma_ch)
+{
+ unsigned long flags;
+
+ if (!dma_channels[dma_ch].name) {
+ printk(KERN_CRIT
+ "%s: trying to free channel %d which is already freed\n",
+ __func__, dma_ch);
+ return;
+ }
+
+ local_irq_save(flags);
+ dma_channels[dma_ch].name = NULL;
+ dma_channels[dma_ch].err_handler = NULL;
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(puv3_free_dma);
+
+static irqreturn_t dma_irq_handler(int irq, void *dev_id)
+{
+ int i, dint;
+
+ dint = readl(DMAC_ITCSR);
+ for (i = 0; i < MAX_DMA_CHANNELS; i++) {
+ if (dint & DMAC_CHANNEL(i)) {
+ struct dma_channel *channel = &dma_channels[i];
+
+ /* Clear TC interrupt of channel i */
+ writel(DMAC_CHANNEL(i), DMAC_ITCCR);
+ writel(0, DMAC_ITCCR);
+
+ if (channel->name && channel->irq_handler) {
+ channel->irq_handler(i, channel->data);
+ } else {
+ /*
+ * IRQ for an unregistered DMA channel:
+ * let's clear the interrupts and disable it.
+ */
+ printk(KERN_WARNING "spurious IRQ for"
+ " DMA channel %d\n", i);
+ }
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t dma_err_handler(int irq, void *dev_id)
+{
+ int i, dint;
+
+ dint = readl(DMAC_IESR);
+ for (i = 0; i < MAX_DMA_CHANNELS; i++) {
+ if (dint & DMAC_CHANNEL(i)) {
+ struct dma_channel *channel = &dma_channels[i];
+
+ /* Clear Err interrupt of channel i */
+ writel(DMAC_CHANNEL(i), DMAC_IECR);
+ writel(0, DMAC_IECR);
+
+ if (channel->name && channel->err_handler) {
+ channel->err_handler(i, channel->data);
+ } else {
+ /*
+ * IRQ for an unregistered DMA channel:
+ * let's clear the interrupts and disable it.
+ */
+ printk(KERN_WARNING "spurious IRQ for"
+ " DMA channel %d\n", i);
+ }
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+int __init puv3_init_dma(void)
+{
+ int i, ret;
+
+ /* dma channel priorities on v8 processors:
+ * ch 0 - 1 <--> (0) DMA_PRIO_HIGH
+ * ch 2 - 3 <--> (1) DMA_PRIO_MEDIUM
+ * ch 4 - 5 <--> (2) DMA_PRIO_LOW
+ */
+ for (i = 0; i < MAX_DMA_CHANNELS; i++) {
+ puv3_stop_dma(i);
+ dma_channels[i].name = NULL;
+ dma_channels[i].prio = min((i & 0x7) >> 1, DMA_PRIO_LOW);
+ }
+
+ ret = request_irq(IRQ_DMA, dma_irq_handler, 0, "DMA", NULL);
+ if (ret) {
+ printk(KERN_CRIT "Can't register IRQ for DMA\n");
+ return ret;
+ }
+
+ ret = request_irq(IRQ_DMAERR, dma_err_handler, 0, "DMAERR", NULL);
+ if (ret) {
+ printk(KERN_CRIT "Can't register IRQ for DMAERR\n");
+ free_irq(IRQ_DMA, "DMA");
+ return ret;
+ }
+
+ return 0;
+}
+
+postcore_initcall(puv3_init_dma);
diff --git a/arch/unicore32/kernel/early_printk.c b/arch/unicore32/kernel/early_printk.c
new file mode 100644
index 00000000000..3922255f1fa
--- /dev/null
+++ b/arch/unicore32/kernel/early_printk.c
@@ -0,0 +1,59 @@
+/*
+ * linux/arch/unicore32/kernel/early_printk.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <mach/ocd.h>
+
+/* On-Chip-Debugger functions */
+
+static void early_ocd_write(struct console *con, const char *s, unsigned n)
+{
+ while (*s && n-- > 0) {
+ if (*s == '\n')
+ ocd_putc((int)'\r');
+ ocd_putc((int)*s);
+ s++;
+ }
+}
+
+static struct console early_ocd_console = {
+ .name = "earlyocd",
+ .write = early_ocd_write,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+/* Direct interface for emergencies */
+static struct console *early_console = &early_ocd_console;
+
+static int __initdata keep_early;
+
+static int __init setup_early_printk(char *buf)
+{
+ if (!buf)
+ return 0;
+
+ if (strstr(buf, "keep"))
+ keep_early = 1;
+
+ if (!strncmp(buf, "ocd", 3))
+ early_console = &early_ocd_console;
+
+ if (keep_early)
+ early_console->flags &= ~CON_BOOT;
+ else
+ early_console->flags |= CON_BOOT;
+ register_console(early_console);
+ return 0;
+}
+early_param("earlyprintk", setup_early_printk);
diff --git a/arch/unicore32/kernel/elf.c b/arch/unicore32/kernel/elf.c
new file mode 100644
index 00000000000..0a176734fef
--- /dev/null
+++ b/arch/unicore32/kernel/elf.c
@@ -0,0 +1,38 @@
+/*
+ * linux/arch/unicore32/kernel/elf.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/personality.h>
+#include <linux/binfmts.h>
+#include <linux/elf.h>
+
+int elf_check_arch(const struct elf32_hdr *x)
+{
+ /* Make sure it's an UniCore executable */
+ if (x->e_machine != EM_UNICORE)
+ return 0;
+
+ /* Make sure the entry address is reasonable */
+ if (x->e_entry & 3)
+ return 0;
+
+ return 1;
+}
+EXPORT_SYMBOL(elf_check_arch);
+
+void elf_set_personality(const struct elf32_hdr *x)
+{
+ unsigned int personality = PER_LINUX;
+
+ set_personality(personality);
+}
+EXPORT_SYMBOL(elf_set_personality);
diff --git a/arch/unicore32/kernel/entry.S b/arch/unicore32/kernel/entry.S
new file mode 100644
index 00000000000..00a259f9819
--- /dev/null
+++ b/arch/unicore32/kernel/entry.S
@@ -0,0 +1,824 @@
+/*
+ * linux/arch/unicore32/kernel/entry.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Low-level vector interface routines
+ */
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+#include <asm/thread_info.h>
+#include <asm/memory.h>
+#include <asm/unistd.h>
+#include <generated/asm-offsets.h>
+#include "debug-macro.S"
+
+@
+@ Most of the stack format comes from struct pt_regs, but with
+@ the addition of 8 bytes for storing syscall args 5 and 6.
+@
+#define S_OFF 8
+
+/*
+ * The SWI code relies on the fact that R0 is at the bottom of the stack
+ * (due to slow/fast restore user regs).
+ */
+#if S_R0 != 0
+#error "Please fix"
+#endif
+
+ .macro zero_fp
+#ifdef CONFIG_FRAME_POINTER
+ mov fp, #0
+#endif
+ .endm
+
+ .macro alignment_trap, rtemp
+#ifdef CONFIG_ALIGNMENT_TRAP
+ ldw \rtemp, .LCcralign
+ ldw \rtemp, [\rtemp]
+ movc p0.c1, \rtemp, #0
+#endif
+ .endm
+
+ .macro load_user_sp_lr, rd, rtemp, offset = 0
+ mov \rtemp, asr
+ xor \rtemp, \rtemp, #(PRIV_MODE ^ SUSR_MODE)
+ mov.a asr, \rtemp @ switch to the SUSR mode
+
+ ldw sp, [\rd+], #\offset @ load sp_user
+ ldw lr, [\rd+], #\offset + 4 @ load lr_user
+
+ xor \rtemp, \rtemp, #(PRIV_MODE ^ SUSR_MODE)
+ mov.a asr, \rtemp @ switch back to the PRIV mode
+ .endm
+
+ .macro priv_exit, rpsr
+ mov.a bsr, \rpsr
+ ldm.w (r0 - r15), [sp]+
+ ldm.b (r16 - pc), [sp]+ @ load r0 - pc, asr
+ .endm
+
+ .macro restore_user_regs, fast = 0, offset = 0
+ ldw r1, [sp+], #\offset + S_PSR @ get calling asr
+ ldw lr, [sp+], #\offset + S_PC @ get pc
+ mov.a bsr, r1 @ save in bsr_priv
+ .if \fast
+ add sp, sp, #\offset + S_R1 @ r0 is syscall return value
+ ldm.w (r1 - r15), [sp]+ @ get calling r1 - r15
+ ldur (r16 - lr), [sp]+ @ get calling r16 - lr
+ .else
+ ldm.w (r0 - r15), [sp]+ @ get calling r0 - r15
+ ldur (r16 - lr), [sp]+ @ get calling r16 - lr
+ .endif
+ nop
+ add sp, sp, #S_FRAME_SIZE - S_R16
+ mov.a pc, lr @ return
+ @ and move bsr_priv into asr
+ .endm
+
+ .macro get_thread_info, rd
+ mov \rd, sp >> #13
+ mov \rd, \rd << #13
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldw \base, =(PKUNITY_INTC_BASE)
+ ldw \irqstat, [\base+], #0xC @ INTC_ICIP
+ ldw \tmp, [\base+], #0x4 @ INTC_ICMR
+ and.a \irqstat, \irqstat, \tmp
+ beq 1001f
+ cntlz \irqnr, \irqstat
+ rsub \irqnr, \irqnr, #31
+1001: /* EQ will be set if no irqs pending */
+ .endm
+
+#ifdef CONFIG_DEBUG_LL
+ .macro printreg, reg, temp
+ adr \temp, 901f
+ stm (r0-r3), [\temp]+
+ stw lr, [\temp+], #0x10
+ mov r0, \reg
+ b.l printhex8
+ mov r0, #':'
+ b.l printch
+ mov r0, pc
+ b.l printhex8
+ adr r0, 902f
+ b.l printascii
+ adr \temp, 901f
+ ldm (r0-r3), [\temp]+
+ ldw lr, [\temp+], #0x10
+ b 903f
+901: .word 0, 0, 0, 0, 0 @ r0-r3, lr
+902: .asciz ": epip4d\n"
+ .align
+903:
+ .endm
+#endif
+
+/*
+ * These are the registers used in the syscall handler, and allow us to
+ * have in theory up to 7 arguments to a function - r0 to r6.
+ *
+ * Note that tbl == why is intentional.
+ *
+ * We must set at least "tsk" and "why" when calling ret_with_reschedule.
+ */
+scno .req r21 @ syscall number
+tbl .req r22 @ syscall table pointer
+why .req r22 @ Linux syscall (!= 0)
+tsk .req r23 @ current thread_info
+
+/*
+ * Interrupt handling. Preserves r17, r18, r19
+ */
+ .macro intr_handler
+1: get_irqnr_and_base r0, r6, r5, lr
+ beq 2f
+ mov r1, sp
+ @
+ @ routine called with r0 = irq number, r1 = struct pt_regs *
+ @
+ adr lr, 1b
+ b asm_do_IRQ
+2:
+ .endm
+
+/*
+ * PRIV mode handlers
+ */
+ .macro priv_entry
+ sub sp, sp, #(S_FRAME_SIZE - 4)
+ stm (r1 - r15), [sp]+
+ add r5, sp, #S_R15
+ stm (r16 - r28), [r5]+
+
+ ldm (r1 - r3), [r0]+
+ add r5, sp, #S_SP - 4 @ here for interlock avoidance
+ mov r4, #-1 @ "" "" "" ""
+ add r0, sp, #(S_FRAME_SIZE - 4)
+ stw.w r1, [sp+], #-4 @ save the "real" r0 copied
+ @ from the exception stack
+
+ mov r1, lr
+
+ @
+ @ We are now ready to fill in the remaining blanks on the stack:
+ @
+ @ r0 - sp_priv
+ @ r1 - lr_priv
+ @ r2 - lr_<exception>, already fixed up for correct return/restart
+ @ r3 - bsr_<exception>
+ @ r4 - orig_r0 (see pt_regs definition in ptrace.h)
+ @
+ stm (r0 - r4), [r5]+
+ .endm
+
+/*
+ * User mode handlers
+ *
+ */
+ .macro user_entry
+ sub sp, sp, #S_FRAME_SIZE
+ stm (r1 - r15), [sp+]
+ add r4, sp, #S_R16
+ stm (r16 - r28), [r4]+
+
+ ldm (r1 - r3), [r0]+
+ add r0, sp, #S_PC @ here for interlock avoidance
+ mov r4, #-1 @ "" "" "" ""
+
+ stw r1, [sp] @ save the "real" r0 copied
+ @ from the exception stack
+
+ @
+ @ We are now ready to fill in the remaining blanks on the stack:
+ @
+ @ r2 - lr_<exception>, already fixed up for correct return/restart
+ @ r3 - bsr_<exception>
+ @ r4 - orig_r0 (see pt_regs definition in ptrace.h)
+ @
+ @ Also, separately save sp_user and lr_user
+ @
+ stm (r2 - r4), [r0]+
+ stur (sp, lr), [r0-]
+
+ @
+ @ Enable the alignment trap while in kernel mode
+ @
+ alignment_trap r0
+
+ @
+ @ Clear FP to mark the first stack frame
+ @
+ zero_fp
+ .endm
+
+ .text
+
+@
+@ __invalid - generic code for failed exception
+@ (re-entrant version of handlers)
+@
+__invalid:
+ sub sp, sp, #S_FRAME_SIZE
+ stm (r1 - r15), [sp+]
+ add r1, sp, #S_R16
+ stm (r16 - r28, sp, lr), [r1]+
+
+ zero_fp
+
+ ldm (r4 - r6), [r0]+
+ add r0, sp, #S_PC @ here for interlock avoidance
+ mov r7, #-1 @ "" "" "" ""
+ stw r4, [sp] @ save preserved r0
+ stm (r5 - r7), [r0]+ @ lr_<exception>,
+ @ asr_<exception>, "old_r0"
+
+ mov r0, sp
+ mov r1, asr
+ b bad_mode
+ENDPROC(__invalid)
+
+ .align 5
+__dabt_priv:
+ priv_entry
+
+ @
+ @ get ready to re-enable interrupts if appropriate
+ @
+ mov r17, asr
+ cand.a r3, #PSR_I_BIT
+ bne 1f
+ andn r17, r17, #PSR_I_BIT
+1:
+
+ @
+ @ Call the processor-specific abort handler:
+ @
+ @ r2 - aborted context pc
+ @ r3 - aborted context asr
+ @
+ @ The abort handler must return the aborted address in r0, and
+ @ the fault status register in r1.
+ @
+ movc r1, p0.c3, #0 @ get FSR
+ movc r0, p0.c4, #0 @ get FAR
+
+ @
+ @ set desired INTR state, then call main handler
+ @
+ mov.a asr, r17
+ mov r2, sp
+ b.l do_DataAbort
+
+ @
+ @ INTRs off again before pulling preserved data off the stack
+ @
+ disable_irq r0
+
+ @
+ @ restore BSR and restart the instruction
+ @
+ ldw r2, [sp+], #S_PSR
+ priv_exit r2 @ return from exception
+ENDPROC(__dabt_priv)
+
+ .align 5
+__intr_priv:
+ priv_entry
+
+ intr_handler
+
+ mov r0, #0 @ epip4d
+ movc p0.c5, r0, #14
+ nop; nop; nop; nop; nop; nop; nop; nop
+
+ ldw r4, [sp+], #S_PSR @ irqs are already disabled
+
+ priv_exit r4 @ return from exception
+ENDPROC(__intr_priv)
+
+ .ltorg
+
+ .align 5
+__extn_priv:
+ priv_entry
+
+ mov r0, sp @ struct pt_regs *regs
+ mov r1, asr
+ b bad_mode @ not supported
+ENDPROC(__extn_priv)
+
+ .align 5
+__pabt_priv:
+ priv_entry
+
+ @
+ @ re-enable interrupts if appropriate
+ @
+ mov r17, asr
+ cand.a r3, #PSR_I_BIT
+ bne 1f
+ andn r17, r17, #PSR_I_BIT
+1:
+
+ @
+ @ set args, then call main handler
+ @
+ @ r0 - address of faulting instruction
+ @ r1 - pointer to registers on stack
+ @
+ mov r0, r2 @ pass address of aborted instruction
+ mov r1, #5
+ mov.a asr, r17
+ mov r2, sp @ regs
+ b.l do_PrefetchAbort @ call abort handler
+
+ @
+ @ INTRs off again before pulling preserved data off the stack
+ @
+ disable_irq r0
+
+ @
+ @ restore BSR and restart the instruction
+ @
+ ldw r2, [sp+], #S_PSR
+ priv_exit r2 @ return from exception
+ENDPROC(__pabt_priv)
+
+ .align 5
+.LCcralign:
+ .word cr_alignment
+
+ .align 5
+__dabt_user:
+ user_entry
+
+#ifdef CONFIG_UNICORE_FPU_F64
+ cff ip, s31
+ cand.a ip, #0x08000000 @ FPU execption traps?
+ beq 209f
+
+ ldw ip, [sp+], #S_PC
+ add ip, ip, #4
+ stw ip, [sp+], #S_PC
+ @
+ @ fall through to the emulation code, which returns using r19 if
+ @ it has emulated the instruction, or the more conventional lr
+ @ if we are to treat this as a real extended instruction
+ @
+ @ r0 - instruction
+ @
+1: ldw.u r0, [r2]
+ adr r19, ret_from_exception
+ adr lr, 209f
+ @
+ @ fallthrough to call do_uc_f64
+ @
+/*
+ * Check whether the instruction is a co-processor instruction.
+ * If yes, we need to call the relevant co-processor handler.
+ *
+ * Note that we don't do a full check here for the co-processor
+ * instructions; all instructions with bit 27 set are well
+ * defined. The only instructions that should fault are the
+ * co-processor instructions.
+ *
+ * Emulators may wish to make use of the following registers:
+ * r0 = instruction opcode.
+ * r2 = PC
+ * r19 = normal "successful" return address
+ * r20 = this threads thread_info structure.
+ * lr = unrecognised instruction return address
+ */
+ get_thread_info r20 @ get current thread
+ and r8, r0, #0x00003c00 @ mask out CP number
+ mov r7, #1
+ stb r7, [r20+], #TI_USED_CP + 2 @ set appropriate used_cp[]
+
+ @ F64 hardware support entry point.
+ @ r0 = faulted instruction
+ @ r19 = return address
+ @ r20 = fp_state
+ enable_irq r4
+ add r20, r20, #TI_FPSTATE @ r20 = workspace
+ cff r1, s31 @ get fpu FPSCR
+ andn r2, r1, #0x08000000
+ ctf r2, s31 @ clear 27 bit
+ mov r2, sp @ nothing stacked - regdump is at TOS
+ mov lr, r19 @ setup for a return to the user code
+
+ @ Now call the C code to package up the bounce to the support code
+ @ r0 holds the trigger instruction
+ @ r1 holds the FPSCR value
+ @ r2 pointer to register dump
+ b ucf64_exchandler
+209:
+#endif
+ @
+ @ Call the processor-specific abort handler:
+ @
+ @ r2 - aborted context pc
+ @ r3 - aborted context asr
+ @
+ @ The abort handler must return the aborted address in r0, and
+ @ the fault status register in r1.
+ @
+ movc r1, p0.c3, #0 @ get FSR
+ movc r0, p0.c4, #0 @ get FAR
+
+ @
+ @ INTRs on, then call the main handler
+ @
+ enable_irq r2
+ mov r2, sp
+ adr lr, ret_from_exception
+ b do_DataAbort
+ENDPROC(__dabt_user)
+
+ .align 5
+__intr_user:
+ user_entry
+
+ get_thread_info tsk
+
+ intr_handler
+
+ mov why, #0
+ b ret_to_user
+ENDPROC(__intr_user)
+
+ .ltorg
+
+ .align 5
+__extn_user:
+ user_entry
+
+ mov r0, sp
+ mov r1, asr
+ b bad_mode
+ENDPROC(__extn_user)
+
+ .align 5
+__pabt_user:
+ user_entry
+
+ mov r0, r2 @ pass address of aborted instruction.
+ mov r1, #5
+ enable_irq r1 @ Enable interrupts
+ mov r2, sp @ regs
+ b.l do_PrefetchAbort @ call abort handler
+ /* fall through */
+/*
+ * This is the return code to user mode for abort handlers
+ */
+ENTRY(ret_from_exception)
+ get_thread_info tsk
+ mov why, #0
+ b ret_to_user
+ENDPROC(__pabt_user)
+ENDPROC(ret_from_exception)
+
+/*
+ * Register switch for UniCore V2 processors
+ * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
+ * previous and next are guaranteed not to be the same.
+ */
+ENTRY(__switch_to)
+ add ip, r1, #TI_CPU_SAVE
+ stm.w (r4 - r15), [ip]+
+ stm.w (r16 - r27, sp, lr), [ip]+
+
+#ifdef CONFIG_UNICORE_FPU_F64
+ add ip, r1, #TI_FPSTATE
+ sfm.w (f0 - f7 ), [ip]+
+ sfm.w (f8 - f15), [ip]+
+ sfm.w (f16 - f23), [ip]+
+ sfm.w (f24 - f31), [ip]+
+ cff r4, s31
+ stw r4, [ip]
+
+ add ip, r2, #TI_FPSTATE
+ lfm.w (f0 - f7 ), [ip]+
+ lfm.w (f8 - f15), [ip]+
+ lfm.w (f16 - f23), [ip]+
+ lfm.w (f24 - f31), [ip]+
+ ldw r4, [ip]
+ ctf r4, s31
+#endif
+ add ip, r2, #TI_CPU_SAVE
+ ldm.w (r4 - r15), [ip]+
+ ldm (r16 - r27, sp, pc), [ip]+ @ Load all regs saved previously
+ENDPROC(__switch_to)
+
+ .align 5
+/*
+ * This is the fast syscall return path. We do as little as
+ * possible here, and this includes saving r0 back into the PRIV
+ * stack.
+ */
+ret_fast_syscall:
+ disable_irq r1 @ disable interrupts
+ ldw r1, [tsk+], #TI_FLAGS
+ cand.a r1, #_TIF_WORK_MASK
+ bne fast_work_pending
+
+ @ fast_restore_user_regs
+ restore_user_regs fast = 1, offset = S_OFF
+
+/*
+ * Ok, we need to do extra processing, enter the slow path.
+ */
+fast_work_pending:
+ stw.w r0, [sp+], #S_R0+S_OFF @ returned r0
+work_pending:
+ cand.a r1, #_TIF_NEED_RESCHED
+ bne work_resched
+ cand.a r1, #_TIF_SIGPENDING|_TIF_NOTIFY_RESUME
+ beq no_work_pending
+ mov r0, sp @ 'regs'
+ mov r2, why @ 'syscall'
+ cand.a r1, #_TIF_SIGPENDING @ delivering a signal?
+ cmovne why, #0 @ prevent further restarts
+ b.l do_notify_resume
+ b ret_slow_syscall @ Check work again
+
+work_resched:
+ b.l schedule
+/*
+ * "slow" syscall return path. "why" tells us if this was a real syscall.
+ */
+ENTRY(ret_to_user)
+ret_slow_syscall:
+ disable_irq r1 @ disable interrupts
+ get_thread_info tsk @ epip4d, one path error?!
+ ldw r1, [tsk+], #TI_FLAGS
+ cand.a r1, #_TIF_WORK_MASK
+ bne work_pending
+no_work_pending:
+ @ slow_restore_user_regs
+ restore_user_regs fast = 0, offset = 0
+ENDPROC(ret_to_user)
+
+/*
+ * This is how we return from a fork.
+ */
+ENTRY(ret_from_fork)
+ b.l schedule_tail
+ get_thread_info tsk
+ ldw r1, [tsk+], #TI_FLAGS @ check for syscall tracing
+ mov why, #1
+ cand.a r1, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
+ beq ret_slow_syscall
+ mov r1, sp
+ mov r0, #1 @ trace exit [IP = 1]
+ b.l syscall_trace
+ b ret_slow_syscall
+ENDPROC(ret_from_fork)
+
+/*=============================================================================
+ * SWI handler
+ *-----------------------------------------------------------------------------
+ */
+ .align 5
+ENTRY(vector_swi)
+ sub sp, sp, #S_FRAME_SIZE
+ stm (r0 - r15), [sp]+ @ Calling r0 - r15
+ add r8, sp, #S_R16
+ stm (r16 - r28), [r8]+ @ Calling r16 - r28
+ add r8, sp, #S_PC
+ stur (sp, lr), [r8-] @ Calling sp, lr
+ mov r8, bsr @ called from non-REAL mode
+ stw lr, [sp+], #S_PC @ Save calling PC
+ stw r8, [sp+], #S_PSR @ Save ASR
+ stw r0, [sp+], #S_OLD_R0 @ Save OLD_R0
+ zero_fp
+
+ /*
+ * Get the system call number.
+ */
+ sub ip, lr, #4
+ ldw.u scno, [ip] @ get SWI instruction
+
+#ifdef CONFIG_ALIGNMENT_TRAP
+ ldw ip, __cr_alignment
+ ldw ip, [ip]
+ movc p0.c1, ip, #0 @ update control register
+#endif
+ enable_irq ip
+
+ get_thread_info tsk
+ ldw tbl, =sys_call_table @ load syscall table pointer
+
+ andn scno, scno, #0xff000000 @ mask off SWI op-code
+ andn scno, scno, #0x00ff0000 @ mask off SWI op-code
+
+ stm.w (r4, r5), [sp-] @ push fifth and sixth args
+ ldw ip, [tsk+], #TI_FLAGS @ check for syscall tracing
+ cand.a ip, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
+ bne __sys_trace
+
+ csub.a scno, #__NR_syscalls @ check upper syscall limit
+ adr lr, ret_fast_syscall @ return address
+ bea 1f
+ ldw pc, [tbl+], scno << #2 @ call sys_* routine
+1:
+ add r1, sp, #S_OFF
+2: mov why, #0 @ no longer a real syscall
+ b sys_ni_syscall @ not private func
+
+ /*
+ * This is the really slow path. We're going to be doing
+ * context switches, and waiting for our parent to respond.
+ */
+__sys_trace:
+ mov r2, scno
+ add r1, sp, #S_OFF
+ mov r0, #0 @ trace entry [IP = 0]
+ b.l syscall_trace
+
+ adr lr, __sys_trace_return @ return address
+ mov scno, r0 @ syscall number (possibly new)
+ add r1, sp, #S_R0 + S_OFF @ pointer to regs
+ csub.a scno, #__NR_syscalls @ check upper syscall limit
+ bea 2b
+ ldm (r0 - r3), [r1]+ @ have to reload r0 - r3
+ ldw pc, [tbl+], scno << #2 @ call sys_* routine
+
+__sys_trace_return:
+ stw.w r0, [sp+], #S_R0 + S_OFF @ save returned r0
+ mov r2, scno
+ mov r1, sp
+ mov r0, #1 @ trace exit [IP = 1]
+ b.l syscall_trace
+ b ret_slow_syscall
+
+ .align 5
+#ifdef CONFIG_ALIGNMENT_TRAP
+ .type __cr_alignment, #object
+__cr_alignment:
+ .word cr_alignment
+#endif
+ .ltorg
+
+ENTRY(sys_execve)
+ add r3, sp, #S_OFF
+ b __sys_execve
+ENDPROC(sys_execve)
+
+ENTRY(sys_clone)
+ add ip, sp, #S_OFF
+ stw ip, [sp+], #4
+ b __sys_clone
+ENDPROC(sys_clone)
+
+ENTRY(sys_rt_sigreturn)
+ add r0, sp, #S_OFF
+ mov why, #0 @ prevent syscall restart handling
+ b __sys_rt_sigreturn
+ENDPROC(sys_rt_sigreturn)
+
+ENTRY(sys_sigaltstack)
+ ldw r2, [sp+], #S_OFF + S_SP
+ b do_sigaltstack
+ENDPROC(sys_sigaltstack)
+
+ __INIT
+
+/*
+ * Vector stubs.
+ *
+ * This code is copied to 0xffff0200 so we can use branches in the
+ * vectors, rather than ldr's. Note that this code must not
+ * exceed 0x300 bytes.
+ *
+ * Common stub entry macro:
+ * Enter in INTR mode, bsr = PRIV/USER ASR, lr = PRIV/USER PC
+ *
+ * SP points to a minimal amount of processor-private memory, the address
+ * of which is copied into r0 for the mode specific abort handler.
+ */
+ .macro vector_stub, name, mode
+ .align 5
+
+vector_\name:
+ @
+ @ Save r0, lr_<exception> (parent PC) and bsr_<exception>
+ @ (parent ASR)
+ @
+ stw r0, [sp]
+ stw lr, [sp+], #4 @ save r0, lr
+ mov lr, bsr
+ stw lr, [sp+], #8 @ save bsr
+
+ @
+ @ Prepare for PRIV mode. INTRs remain disabled.
+ @
+ mov r0, asr
+ xor r0, r0, #(\mode ^ PRIV_MODE)
+ mov.a bsr, r0
+
+ @
+ @ the branch table must immediately follow this code
+ @
+ and lr, lr, #0x03
+ add lr, lr, #1
+ mov r0, sp
+ ldw lr, [pc+], lr << #2
+ mov.a pc, lr @ branch to handler in PRIV mode
+ENDPROC(vector_\name)
+ .align 2
+ @ handler addresses follow this label
+ .endm
+
+ .globl __stubs_start
+__stubs_start:
+/*
+ * Interrupt dispatcher
+ */
+ vector_stub intr, INTR_MODE
+
+ .long __intr_user @ 0 (USER)
+ .long __invalid @ 1
+ .long __invalid @ 2
+ .long __intr_priv @ 3 (PRIV)
+
+/*
+ * Data abort dispatcher
+ * Enter in ABT mode, bsr = USER ASR, lr = USER PC
+ */
+ vector_stub dabt, ABRT_MODE
+
+ .long __dabt_user @ 0 (USER)
+ .long __invalid @ 1
+ .long __invalid @ 2 (INTR)
+ .long __dabt_priv @ 3 (PRIV)
+
+/*
+ * Prefetch abort dispatcher
+ * Enter in ABT mode, bsr = USER ASR, lr = USER PC
+ */
+ vector_stub pabt, ABRT_MODE
+
+ .long __pabt_user @ 0 (USER)
+ .long __invalid @ 1
+ .long __invalid @ 2 (INTR)
+ .long __pabt_priv @ 3 (PRIV)
+
+/*
+ * Undef instr entry dispatcher
+ * Enter in EXTN mode, bsr = PRIV/USER ASR, lr = PRIV/USER PC
+ */
+ vector_stub extn, EXTN_MODE
+
+ .long __extn_user @ 0 (USER)
+ .long __invalid @ 1
+ .long __invalid @ 2 (INTR)
+ .long __extn_priv @ 3 (PRIV)
+
+/*
+ * We group all the following data together to optimise
+ * for CPUs with separate I & D caches.
+ */
+ .align 5
+
+.LCvswi:
+ .word vector_swi
+
+ .globl __stubs_end
+__stubs_end:
+
+ .equ stubs_offset, __vectors_start + 0x200 - __stubs_start
+
+ .globl __vectors_start
+__vectors_start:
+ jepriv SYS_ERROR0
+ b vector_extn + stubs_offset
+ ldw pc, .LCvswi + stubs_offset
+ b vector_pabt + stubs_offset
+ b vector_dabt + stubs_offset
+ jepriv SYS_ERROR0
+ b vector_intr + stubs_offset
+ jepriv SYS_ERROR0
+
+ .globl __vectors_end
+__vectors_end:
+
+ .data
+
+ .globl cr_alignment
+ .globl cr_no_alignment
+cr_alignment:
+ .space 4
+cr_no_alignment:
+ .space 4
diff --git a/arch/unicore32/kernel/fpu-ucf64.c b/arch/unicore32/kernel/fpu-ucf64.c
new file mode 100644
index 00000000000..282a60ac82b
--- /dev/null
+++ b/arch/unicore32/kernel/fpu-ucf64.c
@@ -0,0 +1,126 @@
+/*
+ * linux/arch/unicore32/kernel/fpu-ucf64.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <asm/fpu-ucf64.h>
+
+/*
+ * A special flag to tell the normalisation code not to normalise.
+ */
+#define F64_NAN_FLAG 0x100
+
+/*
+ * A bit pattern used to indicate the initial (unset) value of the
+ * exception mask, in case nothing handles an instruction. This
+ * doesn't include the NAN flag, which get masked out before
+ * we check for an error.
+ */
+#define F64_EXCEPTION_ERROR ((u32)-1 & ~F64_NAN_FLAG)
+
+/*
+ * Since we aren't building with -mfpu=f64, we need to code
+ * these instructions using their MRC/MCR equivalents.
+ */
+#define f64reg(_f64_) #_f64_
+
+#define cff(_f64_) ({ \
+ u32 __v; \
+ asm("cff %0, " f64reg(_f64_) "@ fmrx %0, " #_f64_ \
+ : "=r" (__v) : : "cc"); \
+ __v; \
+ })
+
+#define ctf(_f64_, _var_) \
+ asm("ctf %0, " f64reg(_f64_) "@ fmxr " #_f64_ ", %0" \
+ : : "r" (_var_) : "cc")
+
+/*
+ * Raise a SIGFPE for the current process.
+ * sicode describes the signal being raised.
+ */
+void ucf64_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
+{
+ siginfo_t info;
+
+ memset(&info, 0, sizeof(info));
+
+ info.si_signo = SIGFPE;
+ info.si_code = sicode;
+ info.si_addr = (void __user *)(instruction_pointer(regs) - 4);
+
+ /*
+ * This is the same as NWFPE, because it's not clear what
+ * this is used for
+ */
+ current->thread.error_code = 0;
+ current->thread.trap_no = 6;
+
+ send_sig_info(SIGFPE, &info, current);
+}
+
+/*
+ * Handle exceptions of UniCore-F64.
+ */
+void ucf64_exchandler(u32 inst, u32 fpexc, struct pt_regs *regs)
+{
+ u32 tmp = fpexc;
+ u32 exc = F64_EXCEPTION_ERROR & fpexc;
+
+ pr_debug("UniCore-F64: instruction %08x fpscr %08x\n",
+ inst, fpexc);
+
+ if (exc & FPSCR_CMPINSTR_BIT) {
+ if (exc & FPSCR_CON)
+ tmp |= FPSCR_CON;
+ else
+ tmp &= ~(FPSCR_CON);
+ exc &= ~(FPSCR_CMPINSTR_BIT | FPSCR_CON);
+ } else {
+ pr_debug(KERN_ERR "UniCore-F64 Error: unhandled exceptions\n");
+ pr_debug(KERN_ERR "UniCore-F64 FPSCR 0x%08x INST 0x%08x\n",
+ cff(FPSCR), inst);
+
+ ucf64_raise_sigfpe(0, regs);
+ return;
+ }
+
+ /*
+ * Update the FPSCR with the additional exception flags.
+ * Comparison instructions always return at least one of
+ * these flags set.
+ */
+ tmp &= ~(FPSCR_TRAP | FPSCR_IOS | FPSCR_OFS | FPSCR_UFS |
+ FPSCR_IXS | FPSCR_HIS | FPSCR_IOC | FPSCR_OFC |
+ FPSCR_UFC | FPSCR_IXC | FPSCR_HIC);
+
+ tmp |= exc;
+ ctf(FPSCR, tmp);
+}
+
+/*
+ * F64 support code initialisation.
+ */
+static int __init ucf64_init(void)
+{
+ ctf(FPSCR, 0x0); /* FPSCR_UFE | FPSCR_NDE perhaps better */
+
+ printk(KERN_INFO "Enable UniCore-F64 support.\n");
+
+ return 0;
+}
+
+late_initcall(ucf64_init);
diff --git a/arch/unicore32/kernel/gpio.c b/arch/unicore32/kernel/gpio.c
new file mode 100644
index 00000000000..cb12ec39552
--- /dev/null
+++ b/arch/unicore32/kernel/gpio.c
@@ -0,0 +1,122 @@
+/*
+ * linux/arch/unicore32/kernel/gpio.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/* in FPGA, no GPIO support */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+
+#ifdef CONFIG_LEDS
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+static const struct gpio_led puv3_gpio_leds[] = {
+ { .name = "cpuhealth", .gpio = GPO_CPU_HEALTH, .active_low = 0,
+ .default_trigger = "heartbeat", },
+ { .name = "hdd_led", .gpio = GPO_HDD_LED, .active_low = 1,
+ .default_trigger = "ide-disk", },
+};
+
+static const struct gpio_led_platform_data puv3_gpio_led_data = {
+ .num_leds = ARRAY_SIZE(puv3_gpio_leds),
+ .leds = (void *) puv3_gpio_leds,
+};
+
+static struct platform_device puv3_gpio_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = (void *) &puv3_gpio_led_data,
+ }
+};
+
+static int __init puv3_gpio_leds_init(void)
+{
+ platform_device_register(&puv3_gpio_gpio_leds);
+ return 0;
+}
+
+device_initcall(puv3_gpio_leds_init);
+#endif
+
+static int puv3_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ return readl(GPIO_GPLR) & GPIO_GPIO(offset);
+}
+
+static void puv3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ if (value)
+ writel(GPIO_GPIO(offset), GPIO_GPSR);
+ else
+ writel(GPIO_GPIO(offset), GPIO_GPCR);
+}
+
+static int puv3_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ writel(readl(GPIO_GPDR) & ~GPIO_GPIO(offset), GPIO_GPDR);
+ local_irq_restore(flags);
+ return 0;
+}
+
+static int puv3_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ puv3_gpio_set(chip, offset, value);
+ writel(readl(GPIO_GPDR) | GPIO_GPIO(offset), GPIO_GPDR);
+ local_irq_restore(flags);
+ return 0;
+}
+
+static struct gpio_chip puv3_gpio_chip = {
+ .label = "gpio",
+ .direction_input = puv3_direction_input,
+ .direction_output = puv3_direction_output,
+ .set = puv3_gpio_set,
+ .get = puv3_gpio_get,
+ .base = 0,
+ .ngpio = GPIO_MAX + 1,
+};
+
+void __init puv3_init_gpio(void)
+{
+ writel(GPIO_DIR, GPIO_GPDR);
+#if defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919) \
+ || defined(CONFIG_PUV3_DB0913)
+ gpio_set_value(GPO_WIFI_EN, 1);
+ gpio_set_value(GPO_HDD_LED, 1);
+ gpio_set_value(GPO_VGA_EN, 1);
+ gpio_set_value(GPO_LCD_EN, 1);
+ gpio_set_value(GPO_CAM_PWR_EN, 0);
+ gpio_set_value(GPO_LCD_VCC_EN, 1);
+ gpio_set_value(GPO_SOFT_OFF, 1);
+ gpio_set_value(GPO_BT_EN, 1);
+ gpio_set_value(GPO_FAN_ON, 0);
+ gpio_set_value(GPO_SPKR, 0);
+ gpio_set_value(GPO_CPU_HEALTH, 1);
+ gpio_set_value(GPO_LAN_SEL, 1);
+/*
+ * DO NOT modify the GPO_SET_V1 and GPO_SET_V2 in kernel
+ * gpio_set_value(GPO_SET_V1, 1);
+ * gpio_set_value(GPO_SET_V2, 1);
+ */
+#endif
+ gpiochip_add(&puv3_gpio_chip);
+}
diff --git a/arch/unicore32/kernel/head.S b/arch/unicore32/kernel/head.S
new file mode 100644
index 00000000000..92255f3ab6a
--- /dev/null
+++ b/arch/unicore32/kernel/head.S
@@ -0,0 +1,252 @@
+/*
+ * linux/arch/unicore32/kernel/head.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/assembler.h>
+#include <asm/ptrace.h>
+#include <generated/asm-offsets.h>
+#include <asm/memory.h>
+#include <asm/thread_info.h>
+#include <asm/system.h>
+#include <asm/pgtable-hwdef.h>
+
+#if (PHYS_OFFSET & 0x003fffff)
+#error "PHYS_OFFSET must be at an even 4MiB boundary!"
+#endif
+
+#define KERNEL_RAM_VADDR (PAGE_OFFSET + KERNEL_IMAGE_START)
+#define KERNEL_RAM_PADDR (PHYS_OFFSET + KERNEL_IMAGE_START)
+
+#define KERNEL_PGD_PADDR (KERNEL_RAM_PADDR - 0x1000)
+#define KERNEL_PGD_VADDR (KERNEL_RAM_VADDR - 0x1000)
+
+#define KERNEL_START KERNEL_RAM_VADDR
+#define KERNEL_END _end
+
+/*
+ * swapper_pg_dir is the virtual address of the initial page table.
+ * We place the page tables 4K below KERNEL_RAM_VADDR. Therefore, we must
+ * make sure that KERNEL_RAM_VADDR is correctly set. Currently, we expect
+ * the least significant 16 bits to be 0x8000, but we could probably
+ * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x1000.
+ */
+#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
+#error KERNEL_RAM_VADDR must start at 0xXXXX8000
+#endif
+
+ .globl swapper_pg_dir
+ .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x1000
+
+/*
+ * Kernel startup entry point.
+ * ---------------------------
+ *
+ * This is normally called from the decompressor code. The requirements
+ * are: MMU = off, D-cache = off, I-cache = dont care
+ *
+ * This code is mostly position independent, so if you link the kernel at
+ * 0xc0008000, you call this at __pa(0xc0008000).
+ */
+ __HEAD
+ENTRY(stext)
+ @ set asr
+ mov r0, #PRIV_MODE @ ensure priv mode
+ or r0, #PSR_R_BIT | PSR_I_BIT @ disable irqs
+ mov.a asr, r0
+
+ @ process identify
+ movc r0, p0.c0, #0 @ cpuid
+ movl r1, 0xff00ffff @ mask
+ movl r2, 0x4d000863 @ value
+ and r0, r1, r0
+ cxor.a r0, r2
+ bne __error_p @ invalid processor id
+
+ /*
+ * Clear the 4K level 1 swapper page table
+ */
+ movl r0, #KERNEL_PGD_PADDR @ page table address
+ mov r1, #0
+ add r2, r0, #0x1000
+101: stw.w r1, [r0]+, #4
+ stw.w r1, [r0]+, #4
+ stw.w r1, [r0]+, #4
+ stw.w r1, [r0]+, #4
+ cxor.a r0, r2
+ bne 101b
+
+ movl r4, #KERNEL_PGD_PADDR @ page table address
+ mov r7, #PMD_TYPE_SECT | PMD_PRESENT @ page size: section
+ or r7, r7, #PMD_SECT_CACHEABLE @ cacheable
+ or r7, r7, #PMD_SECT_READ | PMD_SECT_WRITE | PMD_SECT_EXEC
+
+ /*
+ * Create identity mapping for first 4MB of kernel to
+ * cater for the MMU enable. This identity mapping
+ * will be removed by paging_init(). We use our current program
+ * counter to determine corresponding section base address.
+ */
+ mov r6, pc
+ mov r6, r6 >> #22 @ start of kernel section
+ or r1, r7, r6 << #22 @ flags + kernel base
+ stw r1, [r4+], r6 << #2 @ identity mapping
+
+ /*
+ * Now setup the pagetables for our kernel direct
+ * mapped region.
+ */
+ add r0, r4, #(KERNEL_START & 0xff000000) >> 20
+ stw.w r1, [r0+], #(KERNEL_START & 0x00c00000) >> 20
+ movl r6, #(KERNEL_END - 1)
+ add r0, r0, #4
+ add r6, r4, r6 >> #20
+102: csub.a r0, r6
+ add r1, r1, #1 << 22
+ bua 103f
+ stw.w r1, [r0]+, #4
+ b 102b
+103:
+ /*
+ * Then map first 4MB of ram in case it contains our boot params.
+ */
+ add r0, r4, #PAGE_OFFSET >> 20
+ or r6, r7, #(PHYS_OFFSET & 0xffc00000)
+ stw r6, [r0]
+
+ ldw r15, __switch_data @ address to jump to after
+
+ /*
+ * Initialise TLB, Caches, and MMU state ready to switch the MMU
+ * on.
+ */
+ mov r0, #0
+ movc p0.c5, r0, #28 @ cache invalidate all
+ nop8
+ movc p0.c6, r0, #6 @ TLB invalidate all
+ nop8
+
+ /*
+ * ..V. .... ..TB IDAM
+ * ..1. .... ..01 1111
+ */
+ movl r0, #0x201f @ control register setting
+
+ /*
+ * Setup common bits before finally enabling the MMU. Essentially
+ * this is just loading the page table pointer and domain access
+ * registers.
+ */
+ #ifndef CONFIG_ALIGNMENT_TRAP
+ andn r0, r0, #CR_A
+ #endif
+ #ifdef CONFIG_CPU_DCACHE_DISABLE
+ andn r0, r0, #CR_D
+ #endif
+ #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ andn r0, r0, #CR_B
+ #endif
+ #ifdef CONFIG_CPU_ICACHE_DISABLE
+ andn r0, r0, #CR_I
+ #endif
+
+ movc p0.c2, r4, #0 @ set pgd
+ b __turn_mmu_on
+ENDPROC(stext)
+
+/*
+ * Enable the MMU. This completely changes the stucture of the visible
+ * memory space. You will not be able to trace execution through this.
+ *
+ * r0 = cp#0 control register
+ * r15 = *virtual* address to jump to upon completion
+ */
+ .align 5
+__turn_mmu_on:
+ mov r0, r0
+ movc p0.c1, r0, #0 @ write control reg
+ nop @ fetch inst by phys addr
+ mov pc, r15
+ nop8 @ fetch inst by phys addr
+ENDPROC(__turn_mmu_on)
+
+/*
+ * Setup the initial page tables. We only setup the barest
+ * amount which are required to get the kernel running, which
+ * generally means mapping in the kernel code.
+ *
+ * r9 = cpuid
+ * r10 = procinfo
+ *
+ * Returns:
+ * r0, r3, r6, r7 corrupted
+ * r4 = physical page table address
+ */
+ .ltorg
+
+ .align 2
+ .type __switch_data, %object
+__switch_data:
+ .long __mmap_switched
+ .long __bss_start @ r6
+ .long _end @ r7
+ .long cr_alignment @ r8
+ .long init_thread_union + THREAD_START_SP @ sp
+
+/*
+ * The following fragment of code is executed with the MMU on in MMU mode,
+ * and uses absolute addresses; this is not position independent.
+ *
+ * r0 = cp#0 control register
+ */
+__mmap_switched:
+ adr r3, __switch_data + 4
+
+ ldm.w (r6, r7, r8), [r3]+
+ ldw sp, [r3]
+
+ mov fp, #0 @ Clear BSS (and zero fp)
+203: csub.a r6, r7
+ bea 204f
+ stw.w fp, [r6]+,#4
+ b 203b
+204:
+ andn r1, r0, #CR_A @ Clear 'A' bit
+ stm (r0, r1), [r8]+ @ Save control register values
+ b start_kernel
+ENDPROC(__mmap_switched)
+
+/*
+ * Exception handling. Something went wrong and we can't proceed. We
+ * ought to tell the user, but since we don't have any guarantee that
+ * we're even running on the right architecture, we do virtually nothing.
+ *
+ * If CONFIG_DEBUG_LL is set we try to print out something about the error
+ * and hope for the best (useful if bootloader fails to pass a proper
+ * machine ID for example).
+ */
+__error_p:
+#ifdef CONFIG_DEBUG_LL
+ adr r0, str_p1
+ b.l printascii
+ mov r0, r9
+ b.l printhex8
+ adr r0, str_p2
+ b.l printascii
+901: nop8
+ b 901b
+str_p1: .asciz "\nError: unrecognized processor variant (0x"
+str_p2: .asciz ").\n"
+ .align
+#endif
+ENDPROC(__error_p)
+
diff --git a/arch/unicore32/kernel/hibernate.c b/arch/unicore32/kernel/hibernate.c
new file mode 100644
index 00000000000..7d0f0b7983a
--- /dev/null
+++ b/arch/unicore32/kernel/hibernate.c
@@ -0,0 +1,160 @@
+/*
+ * linux/arch/unicore32/kernel/hibernate.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/suspend.h>
+#include <linux/bootmem.h>
+
+#include <asm/system.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/suspend.h>
+
+#include "mach/pm.h"
+
+/* Pointer to the temporary resume page tables */
+pgd_t *resume_pg_dir;
+
+struct swsusp_arch_regs swsusp_arch_regs_cpu0;
+
+/*
+ * Create a middle page table on a resume-safe page and put a pointer to it in
+ * the given global directory entry. This only returns the gd entry
+ * in non-PAE compilation mode, since the middle layer is folded.
+ */
+static pmd_t *resume_one_md_table_init(pgd_t *pgd)
+{
+ pud_t *pud;
+ pmd_t *pmd_table;
+
+ pud = pud_offset(pgd, 0);
+ pmd_table = pmd_offset(pud, 0);
+
+ return pmd_table;
+}
+
+/*
+ * Create a page table on a resume-safe page and place a pointer to it in
+ * a middle page directory entry.
+ */
+static pte_t *resume_one_page_table_init(pmd_t *pmd)
+{
+ if (pmd_none(*pmd)) {
+ pte_t *page_table = (pte_t *)get_safe_page(GFP_ATOMIC);
+ if (!page_table)
+ return NULL;
+
+ set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_KERNEL_TABLE));
+
+ BUG_ON(page_table != pte_offset_kernel(pmd, 0));
+
+ return page_table;
+ }
+
+ return pte_offset_kernel(pmd, 0);
+}
+
+/*
+ * This maps the physical memory to kernel virtual address space, a total
+ * of max_low_pfn pages, by creating page tables starting from address
+ * PAGE_OFFSET. The page tables are allocated out of resume-safe pages.
+ */
+static int resume_physical_mapping_init(pgd_t *pgd_base)
+{
+ unsigned long pfn;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ int pgd_idx, pmd_idx;
+
+ pgd_idx = pgd_index(PAGE_OFFSET);
+ pgd = pgd_base + pgd_idx;
+ pfn = 0;
+
+ for (; pgd_idx < PTRS_PER_PGD; pgd++, pgd_idx++) {
+ pmd = resume_one_md_table_init(pgd);
+ if (!pmd)
+ return -ENOMEM;
+
+ if (pfn >= max_low_pfn)
+ continue;
+
+ for (pmd_idx = 0; pmd_idx < PTRS_PER_PMD; pmd++, pmd_idx++) {
+ pte_t *max_pte;
+
+ if (pfn >= max_low_pfn)
+ break;
+
+ /* Map with normal page tables.
+ * NOTE: We can mark everything as executable here
+ */
+ pte = resume_one_page_table_init(pmd);
+ if (!pte)
+ return -ENOMEM;
+
+ max_pte = pte + PTRS_PER_PTE;
+ for (; pte < max_pte; pte++, pfn++) {
+ if (pfn >= max_low_pfn)
+ break;
+
+ set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC));
+ }
+ }
+ }
+
+ return 0;
+}
+
+static inline void resume_init_first_level_page_table(pgd_t *pg_dir)
+{
+}
+
+int swsusp_arch_resume(void)
+{
+ int error;
+
+ resume_pg_dir = (pgd_t *)get_safe_page(GFP_ATOMIC);
+ if (!resume_pg_dir)
+ return -ENOMEM;
+
+ resume_init_first_level_page_table(resume_pg_dir);
+ error = resume_physical_mapping_init(resume_pg_dir);
+ if (error)
+ return error;
+
+ /* We have got enough memory and from now on we cannot recover */
+ restore_image(resume_pg_dir, restore_pblist);
+ return 0;
+}
+
+/*
+ * pfn_is_nosave - check if given pfn is in the 'nosave' section
+ */
+
+int pfn_is_nosave(unsigned long pfn)
+{
+ unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
+ unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
+
+ return (pfn >= begin_pfn) && (pfn < end_pfn);
+}
+
+void save_processor_state(void)
+{
+}
+
+void restore_processor_state(void)
+{
+ local_flush_tlb_all();
+}
diff --git a/arch/unicore32/kernel/hibernate_asm.S b/arch/unicore32/kernel/hibernate_asm.S
new file mode 100644
index 00000000000..cc3c65253c8
--- /dev/null
+++ b/arch/unicore32/kernel/hibernate_asm.S
@@ -0,0 +1,117 @@
+/*
+ * linux/arch/unicore32/kernel/hibernate_asm.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <generated/asm-offsets.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/assembler.h>
+
+@ restore_image(pgd_t *resume_pg_dir, struct pbe *restore_pblist)
+@ r0: resume_pg_dir
+@ r1: restore_pblist
+@ copy restore_pblist pages
+@ restore registers from swsusp_arch_regs_cpu0
+@
+ENTRY(restore_image)
+ sub r0, r0, #PAGE_OFFSET
+ mov r5, #0
+ movc p0.c6, r5, #6 @invalidate ITLB & DTLB
+ movc p0.c2, r0, #0
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ .p2align 4,,7
+101:
+ csub.a r1, #0
+ beq 109f
+
+ ldw r6, [r1+], #PBE_ADDRESS
+ ldw r7, [r1+], #PBE_ORIN_ADDRESS
+
+ movl ip, #128
+102: ldm.w (r8 - r15), [r6]+
+ stm.w (r8 - r15), [r7]+
+ sub.a ip, ip, #1
+ bne 102b
+
+ ldw r1, [r1+], #PBE_NEXT
+ b 101b
+
+ .p2align 4,,7
+109:
+ /* go back to the original page tables */
+ ldw r0, =swapper_pg_dir
+ sub r0, r0, #PAGE_OFFSET
+ mov r5, #0
+ movc p0.c6, r5, #6
+ movc p0.c2, r0, #0
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+#ifdef CONFIG_UNICORE_FPU_F64
+ ldw ip, 1f
+ add ip, ip, #SWSUSP_FPSTATE
+ lfm.w (f0 - f7 ), [ip]+
+ lfm.w (f8 - f15), [ip]+
+ lfm.w (f16 - f23), [ip]+
+ lfm.w (f24 - f31), [ip]+
+ ldw r4, [ip]
+ ctf r4, s31
+#endif
+ mov r0, #0x0
+ ldw ip, 1f
+ add ip, ip, #SWSUSP_CPU
+ ldm.w (r4 - r15), [ip]+
+ ldm (r16 - r27, sp, pc), [ip]+ @ Load all regs saved previously
+
+ .align 2
+1: .long swsusp_arch_regs_cpu0
+
+
+@ swsusp_arch_suspend()
+@ - prepare pc for resume, return from function without swsusp_save on resume
+@ - save registers in swsusp_arch_regs_cpu0
+@ - call swsusp_save write suspend image
+
+ENTRY(swsusp_arch_suspend)
+ ldw ip, 1f
+ add ip, ip, #SWSUSP_CPU
+ stm.w (r4 - r15), [ip]+
+ stm.w (r16 - r27, sp, lr), [ip]+
+
+#ifdef CONFIG_UNICORE_FPU_F64
+ ldw ip, 1f
+ add ip, ip, #SWSUSP_FPSTATE
+ sfm.w (f0 - f7 ), [ip]+
+ sfm.w (f8 - f15), [ip]+
+ sfm.w (f16 - f23), [ip]+
+ sfm.w (f24 - f31), [ip]+
+ cff r4, s31
+ stw r4, [ip]
+#endif
+ b swsusp_save @ no return
+
+1: .long swsusp_arch_regs_cpu0
diff --git a/arch/unicore32/kernel/init_task.c b/arch/unicore32/kernel/init_task.c
new file mode 100644
index 00000000000..a35a1e50e4f
--- /dev/null
+++ b/arch/unicore32/kernel/init_task.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/unicore32/kernel/init_task.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/mqueue.h>
+#include <linux/uaccess.h>
+
+#include <asm/pgtable.h>
+
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is 8192-byte aligned due to the
+ * way process stacks are handled. This is done by making sure
+ * the linker maps this in the .text segment right after head.S,
+ * and making head.S ensure the proper alignment.
+ *
+ * The things we do for performance..
+ */
+union thread_union init_thread_union __init_task_data = {
+ INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
diff --git a/arch/unicore32/kernel/irq.c b/arch/unicore32/kernel/irq.c
new file mode 100644
index 00000000000..b23624cf306
--- /dev/null
+++ b/arch/unicore32/kernel/irq.c
@@ -0,0 +1,426 @@
+/*
+ * linux/arch/unicore32/kernel/irq.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/random.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/kallsyms.h>
+#include <linux/proc_fs.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+
+#include <asm/system.h>
+#include <mach/hardware.h>
+
+#include "setup.h"
+
+/*
+ * PKUnity GPIO edge detection for IRQs:
+ * IRQs are generated on Falling-Edge, Rising-Edge, or both.
+ * Use this instead of directly setting GRER/GFER.
+ */
+static int GPIO_IRQ_rising_edge;
+static int GPIO_IRQ_falling_edge;
+static int GPIO_IRQ_mask = 0;
+
+#define GPIO_MASK(irq) (1 << (irq - IRQ_GPIO0))
+
+static int puv3_gpio_type(struct irq_data *d, unsigned int type)
+{
+ unsigned int mask;
+
+ if (d->irq < IRQ_GPIOHIGH)
+ mask = 1 << d->irq;
+ else
+ mask = GPIO_MASK(d->irq);
+
+ if (type == IRQ_TYPE_PROBE) {
+ if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
+ return 0;
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ }
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ GPIO_IRQ_rising_edge |= mask;
+ else
+ GPIO_IRQ_rising_edge &= ~mask;
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ GPIO_IRQ_falling_edge |= mask;
+ else
+ GPIO_IRQ_falling_edge &= ~mask;
+
+ writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
+ writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
+
+ return 0;
+}
+
+/*
+ * GPIO IRQs must be acknowledged. This is for IRQs from 0 to 7.
+ */
+static void puv3_low_gpio_ack(struct irq_data *d)
+{
+ writel((1 << d->irq), GPIO_GEDR);
+}
+
+static void puv3_low_gpio_mask(struct irq_data *d)
+{
+ writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR);
+}
+
+static void puv3_low_gpio_unmask(struct irq_data *d)
+{
+ writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR);
+}
+
+static int puv3_low_gpio_wake(struct irq_data *d, unsigned int on)
+{
+ if (on)
+ writel(readl(PM_PWER) | (1 << d->irq), PM_PWER);
+ else
+ writel(readl(PM_PWER) & ~(1 << d->irq), PM_PWER);
+ return 0;
+}
+
+static struct irq_chip puv3_low_gpio_chip = {
+ .name = "GPIO-low",
+ .irq_ack = puv3_low_gpio_ack,
+ .irq_mask = puv3_low_gpio_mask,
+ .irq_unmask = puv3_low_gpio_unmask,
+ .irq_set_type = puv3_gpio_type,
+ .irq_set_wake = puv3_low_gpio_wake,
+};
+
+/*
+ * IRQ8 (GPIO0 through 27) handler. We enter here with the
+ * irq_controller_lock held, and IRQs disabled. Decode the IRQ
+ * and call the handler.
+ */
+static void
+puv3_gpio_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int mask;
+
+ mask = readl(GPIO_GEDR);
+ do {
+ /*
+ * clear down all currently active IRQ sources.
+ * We will be processing them all.
+ */
+ writel(mask, GPIO_GEDR);
+
+ irq = IRQ_GPIO0;
+ do {
+ if (mask & 1)
+ generic_handle_irq(irq);
+ mask >>= 1;
+ irq++;
+ } while (mask);
+ mask = readl(GPIO_GEDR);
+ } while (mask);
+}
+
+/*
+ * GPIO0-27 edge IRQs need to be handled specially.
+ * In addition, the IRQs are all collected up into one bit in the
+ * interrupt controller registers.
+ */
+static void puv3_high_gpio_ack(struct irq_data *d)
+{
+ unsigned int mask = GPIO_MASK(d->irq);
+
+ writel(mask, GPIO_GEDR);
+}
+
+static void puv3_high_gpio_mask(struct irq_data *d)
+{
+ unsigned int mask = GPIO_MASK(d->irq);
+
+ GPIO_IRQ_mask &= ~mask;
+
+ writel(readl(GPIO_GRER) & ~mask, GPIO_GRER);
+ writel(readl(GPIO_GFER) & ~mask, GPIO_GFER);
+}
+
+static void puv3_high_gpio_unmask(struct irq_data *d)
+{
+ unsigned int mask = GPIO_MASK(d->irq);
+
+ GPIO_IRQ_mask |= mask;
+
+ writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
+ writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
+}
+
+static int puv3_high_gpio_wake(struct irq_data *d, unsigned int on)
+{
+ if (on)
+ writel(readl(PM_PWER) | PM_PWER_GPIOHIGH, PM_PWER);
+ else
+ writel(readl(PM_PWER) & ~PM_PWER_GPIOHIGH, PM_PWER);
+ return 0;
+}
+
+static struct irq_chip puv3_high_gpio_chip = {
+ .name = "GPIO-high",
+ .irq_ack = puv3_high_gpio_ack,
+ .irq_mask = puv3_high_gpio_mask,
+ .irq_unmask = puv3_high_gpio_unmask,
+ .irq_set_type = puv3_gpio_type,
+ .irq_set_wake = puv3_high_gpio_wake,
+};
+
+/*
+ * We don't need to ACK IRQs on the PKUnity unless they're GPIOs
+ * this is for internal IRQs i.e. from 8 to 31.
+ */
+static void puv3_mask_irq(struct irq_data *d)
+{
+ writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR);
+}
+
+static void puv3_unmask_irq(struct irq_data *d)
+{
+ writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR);
+}
+
+/*
+ * Apart form GPIOs, only the RTC alarm can be a wakeup event.
+ */
+static int puv3_set_wake(struct irq_data *d, unsigned int on)
+{
+ if (d->irq == IRQ_RTCAlarm) {
+ if (on)
+ writel(readl(PM_PWER) | PM_PWER_RTC, PM_PWER);
+ else
+ writel(readl(PM_PWER) & ~PM_PWER_RTC, PM_PWER);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static struct irq_chip puv3_normal_chip = {
+ .name = "PKUnity-v3",
+ .irq_ack = puv3_mask_irq,
+ .irq_mask = puv3_mask_irq,
+ .irq_unmask = puv3_unmask_irq,
+ .irq_set_wake = puv3_set_wake,
+};
+
+static struct resource irq_resource = {
+ .name = "irqs",
+ .start = io_v2p(PKUNITY_INTC_BASE),
+ .end = io_v2p(PKUNITY_INTC_BASE) + 0xFFFFF,
+};
+
+static struct puv3_irq_state {
+ unsigned int saved;
+ unsigned int icmr;
+ unsigned int iclr;
+ unsigned int iccr;
+} puv3_irq_state;
+
+static int puv3_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct puv3_irq_state *st = &puv3_irq_state;
+
+ st->saved = 1;
+ st->icmr = readl(INTC_ICMR);
+ st->iclr = readl(INTC_ICLR);
+ st->iccr = readl(INTC_ICCR);
+
+ /*
+ * Disable all GPIO-based interrupts.
+ */
+ writel(readl(INTC_ICMR) & ~(0x1ff), INTC_ICMR);
+
+ /*
+ * Set the appropriate edges for wakeup.
+ */
+ writel(readl(PM_PWER) & GPIO_IRQ_rising_edge, GPIO_GRER);
+ writel(readl(PM_PWER) & GPIO_IRQ_falling_edge, GPIO_GFER);
+
+ /*
+ * Clear any pending GPIO interrupts.
+ */
+ writel(readl(GPIO_GEDR), GPIO_GEDR);
+
+ return 0;
+}
+
+static int puv3_irq_resume(struct sys_device *dev)
+{
+ struct puv3_irq_state *st = &puv3_irq_state;
+
+ if (st->saved) {
+ writel(st->iccr, INTC_ICCR);
+ writel(st->iclr, INTC_ICLR);
+
+ writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
+ writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
+
+ writel(st->icmr, INTC_ICMR);
+ }
+ return 0;
+}
+
+static struct sysdev_class puv3_irq_sysclass = {
+ .name = "pkunity-irq",
+ .suspend = puv3_irq_suspend,
+ .resume = puv3_irq_resume,
+};
+
+static struct sys_device puv3_irq_device = {
+ .id = 0,
+ .cls = &puv3_irq_sysclass,
+};
+
+static int __init puv3_irq_init_devicefs(void)
+{
+ sysdev_class_register(&puv3_irq_sysclass);
+ return sysdev_register(&puv3_irq_device);
+}
+
+device_initcall(puv3_irq_init_devicefs);
+
+void __init init_IRQ(void)
+{
+ unsigned int irq;
+
+ request_resource(&iomem_resource, &irq_resource);
+
+ /* disable all IRQs */
+ writel(0, INTC_ICMR);
+
+ /* all IRQs are IRQ, not REAL */
+ writel(0, INTC_ICLR);
+
+ /* clear all GPIO edge detects */
+ writel(FMASK(8, 0) & ~FIELD(1, 1, GPI_SOFF_REQ), GPIO_GPIR);
+ writel(0, GPIO_GFER);
+ writel(0, GPIO_GRER);
+ writel(0x0FFFFFFF, GPIO_GEDR);
+
+ writel(1, INTC_ICCR);
+
+ for (irq = 0; irq < IRQ_GPIOHIGH; irq++) {
+ set_irq_chip(irq, &puv3_low_gpio_chip);
+ set_irq_handler(irq, handle_edge_irq);
+ irq_modify_status(irq,
+ IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
+ 0);
+ }
+
+ for (irq = IRQ_GPIOHIGH + 1; irq < IRQ_GPIO0; irq++) {
+ set_irq_chip(irq, &puv3_normal_chip);
+ set_irq_handler(irq, handle_level_irq);
+ irq_modify_status(irq,
+ IRQ_NOREQUEST | IRQ_NOAUTOEN,
+ IRQ_NOPROBE);
+ }
+
+ for (irq = IRQ_GPIO0; irq <= IRQ_GPIO27; irq++) {
+ set_irq_chip(irq, &puv3_high_gpio_chip);
+ set_irq_handler(irq, handle_edge_irq);
+ irq_modify_status(irq,
+ IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
+ 0);
+ }
+
+ /*
+ * Install handler for GPIO 0-27 edge detect interrupts
+ */
+ set_irq_chip(IRQ_GPIOHIGH, &puv3_normal_chip);
+ set_irq_chained_handler(IRQ_GPIOHIGH, puv3_gpio_handler);
+
+#ifdef CONFIG_PUV3_GPIO
+ puv3_init_gpio();
+#endif
+}
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+ int i = *(loff_t *) v, cpu;
+ struct irq_desc *desc;
+ struct irqaction *action;
+ unsigned long flags;
+
+ if (i == 0) {
+ char cpuname[12];
+
+ seq_printf(p, " ");
+ for_each_present_cpu(cpu) {
+ sprintf(cpuname, "CPU%d", cpu);
+ seq_printf(p, " %10s", cpuname);
+ }
+ seq_putc(p, '\n');
+ }
+
+ if (i < nr_irqs) {
+ desc = irq_to_desc(i);
+ raw_spin_lock_irqsave(&desc->lock, flags);
+ action = desc->action;
+ if (!action)
+ goto unlock;
+
+ seq_printf(p, "%3d: ", i);
+ for_each_present_cpu(cpu)
+ seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
+ seq_printf(p, " %10s", desc->irq_data.chip->name ? : "-");
+ seq_printf(p, " %s", action->name);
+ for (action = action->next; action; action = action->next)
+ seq_printf(p, ", %s", action->name);
+
+ seq_putc(p, '\n');
+unlock:
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+ } else if (i == nr_irqs) {
+ seq_printf(p, "Error in interrupt!\n");
+ }
+ return 0;
+}
+
+/*
+ * do_IRQ handles all hardware IRQ's. Decoded IRQs should not
+ * come via this function. Instead, they should provide their
+ * own 'handler'
+ */
+asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+ struct pt_regs *old_regs = set_irq_regs(regs);
+
+ irq_enter();
+
+ /*
+ * Some hardware gives randomly wrong interrupts. Rather
+ * than crashing, do something sensible.
+ */
+ if (unlikely(irq >= nr_irqs)) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "Bad IRQ%u\n", irq);
+ ack_bad_irq(irq);
+ } else {
+ generic_handle_irq(irq);
+ }
+
+ irq_exit();
+ set_irq_regs(old_regs);
+}
+
diff --git a/arch/unicore32/kernel/ksyms.c b/arch/unicore32/kernel/ksyms.c
new file mode 100644
index 00000000000..a8970809428
--- /dev/null
+++ b/arch/unicore32/kernel/ksyms.c
@@ -0,0 +1,99 @@
+/*
+ * linux/arch/unicore32/kernel/ksyms.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/cryptohash.h>
+#include <linux/delay.h>
+#include <linux/in6.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#include <asm/checksum.h>
+#include <asm/system.h>
+
+#include "ksyms.h"
+
+EXPORT_SYMBOL(__uc32_find_next_zero_bit);
+EXPORT_SYMBOL(__uc32_find_next_bit);
+
+EXPORT_SYMBOL(__backtrace);
+
+ /* platform dependent support */
+EXPORT_SYMBOL(__udelay);
+EXPORT_SYMBOL(__const_udelay);
+
+ /* networking */
+EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+EXPORT_SYMBOL(__csum_ipv6_magic);
+
+ /* io */
+#ifndef __raw_readsb
+EXPORT_SYMBOL(__raw_readsb);
+#endif
+#ifndef __raw_readsw
+EXPORT_SYMBOL(__raw_readsw);
+#endif
+#ifndef __raw_readsl
+EXPORT_SYMBOL(__raw_readsl);
+#endif
+#ifndef __raw_writesb
+EXPORT_SYMBOL(__raw_writesb);
+#endif
+#ifndef __raw_writesw
+EXPORT_SYMBOL(__raw_writesw);
+#endif
+#ifndef __raw_writesl
+EXPORT_SYMBOL(__raw_writesl);
+#endif
+
+ /* string / mem functions */
+EXPORT_SYMBOL(strchr);
+EXPORT_SYMBOL(strrchr);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memchr);
+
+ /* user mem (segment) */
+EXPORT_SYMBOL(__strnlen_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+
+EXPORT_SYMBOL(copy_page);
+
+EXPORT_SYMBOL(__copy_from_user);
+EXPORT_SYMBOL(__copy_to_user);
+EXPORT_SYMBOL(__clear_user);
+
+EXPORT_SYMBOL(__get_user_1);
+EXPORT_SYMBOL(__get_user_2);
+EXPORT_SYMBOL(__get_user_4);
+
+EXPORT_SYMBOL(__put_user_1);
+EXPORT_SYMBOL(__put_user_2);
+EXPORT_SYMBOL(__put_user_4);
+EXPORT_SYMBOL(__put_user_8);
+
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__divsi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__modsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__ucmpdi2);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(__umodsi3);
+EXPORT_SYMBOL(__bswapsi2);
+
diff --git a/arch/unicore32/kernel/ksyms.h b/arch/unicore32/kernel/ksyms.h
new file mode 100644
index 00000000000..185cdc712d0
--- /dev/null
+++ b/arch/unicore32/kernel/ksyms.h
@@ -0,0 +1,15 @@
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler... (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __divsi3(void);
+extern void __lshrdi3(void);
+extern void __modsi3(void);
+extern void __muldi3(void);
+extern void __ucmpdi2(void);
+extern void __udivsi3(void);
+extern void __umodsi3(void);
+extern void __bswapsi2(void);
diff --git a/arch/unicore32/kernel/module.c b/arch/unicore32/kernel/module.c
new file mode 100644
index 00000000000..3e5a38d71a1
--- /dev/null
+++ b/arch/unicore32/kernel/module.c
@@ -0,0 +1,152 @@
+/*
+ * linux/arch/unicore32/kernel/module.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/moduleloader.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/gfp.h>
+
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+
+void *module_alloc(unsigned long size)
+{
+ struct vm_struct *area;
+
+ size = PAGE_ALIGN(size);
+ if (!size)
+ return NULL;
+
+ area = __get_vm_area(size, VM_ALLOC, MODULES_VADDR, MODULES_END);
+ if (!area)
+ return NULL;
+
+ return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL_EXEC);
+}
+
+void module_free(struct module *module, void *region)
+{
+ vfree(region);
+}
+
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+ Elf_Shdr *sechdrs,
+ char *secstrings,
+ struct module *mod)
+{
+ return 0;
+}
+
+int
+apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
+ unsigned int relindex, struct module *module)
+{
+ Elf32_Shdr *symsec = sechdrs + symindex;
+ Elf32_Shdr *relsec = sechdrs + relindex;
+ Elf32_Shdr *dstsec = sechdrs + relsec->sh_info;
+ Elf32_Rel *rel = (void *)relsec->sh_addr;
+ unsigned int i;
+
+ for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) {
+ unsigned long loc;
+ Elf32_Sym *sym;
+ s32 offset;
+
+ offset = ELF32_R_SYM(rel->r_info);
+ if (offset < 0 || offset >
+ (symsec->sh_size / sizeof(Elf32_Sym))) {
+ printk(KERN_ERR "%s: bad relocation, "
+ "section %d reloc %d\n",
+ module->name, relindex, i);
+ return -ENOEXEC;
+ }
+
+ sym = ((Elf32_Sym *)symsec->sh_addr) + offset;
+
+ if (rel->r_offset < 0 || rel->r_offset >
+ dstsec->sh_size - sizeof(u32)) {
+ printk(KERN_ERR "%s: out of bounds relocation, "
+ "section %d reloc %d offset %d size %d\n",
+ module->name, relindex, i, rel->r_offset,
+ dstsec->sh_size);
+ return -ENOEXEC;
+ }
+
+ loc = dstsec->sh_addr + rel->r_offset;
+
+ switch (ELF32_R_TYPE(rel->r_info)) {
+ case R_UNICORE_NONE:
+ /* ignore */
+ break;
+
+ case R_UNICORE_ABS32:
+ *(u32 *)loc += sym->st_value;
+ break;
+
+ case R_UNICORE_PC24:
+ case R_UNICORE_CALL:
+ case R_UNICORE_JUMP24:
+ offset = (*(u32 *)loc & 0x00ffffff) << 2;
+ if (offset & 0x02000000)
+ offset -= 0x04000000;
+
+ offset += sym->st_value - loc;
+ if (offset & 3 ||
+ offset <= (s32)0xfe000000 ||
+ offset >= (s32)0x02000000) {
+ printk(KERN_ERR
+ "%s: relocation out of range, section "
+ "%d reloc %d sym '%s'\n", module->name,
+ relindex, i, strtab + sym->st_name);
+ return -ENOEXEC;
+ }
+
+ offset >>= 2;
+
+ *(u32 *)loc &= 0xff000000;
+ *(u32 *)loc |= offset & 0x00ffffff;
+ break;
+
+ default:
+ printk(KERN_ERR "%s: unknown relocation: %u\n",
+ module->name, ELF32_R_TYPE(rel->r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+}
+
+int
+apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec,
+ struct module *module)
+{
+ printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
+ module->name);
+ return -ENOEXEC;
+}
+
+int
+module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
+ struct module *module)
+{
+ return 0;
+}
+
+void
+module_arch_cleanup(struct module *mod)
+{
+}
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
new file mode 100644
index 00000000000..100eab842e6
--- /dev/null
+++ b/arch/unicore32/kernel/pci.c
@@ -0,0 +1,404 @@
+/*
+ * linux/arch/unicore32/kernel/pci.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * PCI bios-type initialisation for PCI machines
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+static int debug_pci;
+static int use_firmware;
+
+#define CONFIG_CMD(bus, devfn, where) \
+ (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
+
+static int
+puv3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *value)
+{
+ writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
+ switch (size) {
+ case 1:
+ *value = (readl(PCICFG_DATA) >> ((where & 3) * 8)) & 0xFF;
+ break;
+ case 2:
+ *value = (readl(PCICFG_DATA) >> ((where & 2) * 8)) & 0xFFFF;
+ break;
+ case 4:
+ *value = readl(PCICFG_DATA);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+puv3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 value)
+{
+ writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
+ switch (size) {
+ case 1:
+ writel((readl(PCICFG_DATA) & ~FMASK(8, (where&3)*8))
+ | FIELD(value, 8, (where&3)*8), PCICFG_DATA);
+ break;
+ case 2:
+ writel((readl(PCICFG_DATA) & ~FMASK(16, (where&2)*8))
+ | FIELD(value, 16, (where&2)*8), PCICFG_DATA);
+ break;
+ case 4:
+ writel(value, PCICFG_DATA);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops pci_puv3_ops = {
+ .read = puv3_read_config,
+ .write = puv3_write_config,
+};
+
+void pci_puv3_preinit(void)
+{
+ printk(KERN_DEBUG "PCI: PKUnity PCI Controller Initializing ...\n");
+ /* config PCI bridge base */
+ writel(io_v2p(PKUNITY_PCIBRI_BASE), PCICFG_BRIBASE);
+
+ writel(0, PCIBRI_AHBCTL0);
+ writel(io_v2p(PKUNITY_PCIBRI_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR0);
+ writel(0xFFFF0000, PCIBRI_AHBAMR0);
+ writel(0, PCIBRI_AHBTAR0);
+
+ writel(PCIBRI_CTLx_AT, PCIBRI_AHBCTL1);
+ writel(io_v2p(PKUNITY_PCILIO_BASE) | PCIBRI_BARx_IO, PCIBRI_AHBBAR1);
+ writel(0xFFFF0000, PCIBRI_AHBAMR1);
+ writel(0x00000000, PCIBRI_AHBTAR1);
+
+ writel(PCIBRI_CTLx_PREF, PCIBRI_AHBCTL2);
+ writel(io_v2p(PKUNITY_PCIMEM_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR2);
+ writel(0xF8000000, PCIBRI_AHBAMR2);
+ writel(0, PCIBRI_AHBTAR2);
+
+ writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_BAR1);
+
+ writel(PCIBRI_CTLx_AT | PCIBRI_CTLx_PREF, PCIBRI_PCICTL0);
+ writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_PCIBAR0);
+ writel(0xF8000000, PCIBRI_PCIAMR0);
+ writel(PKUNITY_SDRAM_BASE, PCIBRI_PCITAR0);
+
+ writel(readl(PCIBRI_CMD) | PCIBRI_CMD_IO | PCIBRI_CMD_MEM, PCIBRI_CMD);
+}
+
+static int __init pci_puv3_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (dev->bus->number == 0) {
+#ifdef CONFIG_ARCH_FPGA /* 4 pci slots */
+ if (dev->devfn == 0x00)
+ return IRQ_PCIINTA;
+ else if (dev->devfn == 0x08)
+ return IRQ_PCIINTB;
+ else if (dev->devfn == 0x10)
+ return IRQ_PCIINTC;
+ else if (dev->devfn == 0x18)
+ return IRQ_PCIINTD;
+#endif
+#ifdef CONFIG_PUV3_DB0913 /* 3 pci slots */
+ if (dev->devfn == 0x30)
+ return IRQ_PCIINTB;
+ else if (dev->devfn == 0x60)
+ return IRQ_PCIINTC;
+ else if (dev->devfn == 0x58)
+ return IRQ_PCIINTD;
+#endif
+#if defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919)
+ /* only support 2 pci devices */
+ if (dev->devfn == 0x00)
+ return IRQ_PCIINTC; /* sata */
+#endif
+ }
+ return -1;
+}
+
+/*
+ * Only first 128MB of memory can be accessed via PCI.
+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
+ * This is really ugly and we need a better way of specifying
+ * DMA-capable regions of memory.
+ */
+void __init puv3_pci_adjust_zones(unsigned long *zone_size,
+ unsigned long *zhole_size)
+{
+ unsigned int sz = SZ_128M >> PAGE_SHIFT;
+
+ /*
+ * Only adjust if > 128M on current system
+ */
+ if (zone_size[0] <= sz)
+ return;
+
+ zone_size[1] = zone_size[0] - sz;
+ zone_size[0] = sz;
+ zhole_size[1] = zhole_size[0];
+ zhole_size[0] = 0;
+}
+
+void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+ if (debug_pci)
+ printk(KERN_DEBUG "PCI: Assigning IRQ %02d to %s\n",
+ irq, pci_name(dev));
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+/*
+ * If the bus contains any of these devices, then we must not turn on
+ * parity checking of any kind.
+ */
+static inline int pdev_bad_for_parity(struct pci_dev *dev)
+{
+ return 0;
+}
+
+/*
+ * pcibios_fixup_bus - Called after each bus is probed,
+ * but before its children are examined.
+ */
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+ u16 features = PCI_COMMAND_SERR
+ | PCI_COMMAND_PARITY
+ | PCI_COMMAND_FAST_BACK;
+
+ bus->resource[0] = &ioport_resource;
+ bus->resource[1] = &iomem_resource;
+
+ /*
+ * Walk the devices on this bus, working out what we can
+ * and can't support.
+ */
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ u16 status;
+
+ pci_read_config_word(dev, PCI_STATUS, &status);
+
+ /*
+ * If any device on this bus does not support fast back
+ * to back transfers, then the bus as a whole is not able
+ * to support them. Having fast back to back transfers
+ * on saves us one PCI cycle per transaction.
+ */
+ if (!(status & PCI_STATUS_FAST_BACK))
+ features &= ~PCI_COMMAND_FAST_BACK;
+
+ if (pdev_bad_for_parity(dev))
+ features &= ~(PCI_COMMAND_SERR
+ | PCI_COMMAND_PARITY);
+
+ switch (dev->class >> 8) {
+ case PCI_CLASS_BRIDGE_PCI:
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
+ status |= PCI_BRIDGE_CTL_PARITY
+ | PCI_BRIDGE_CTL_MASTER_ABORT;
+ status &= ~(PCI_BRIDGE_CTL_BUS_RESET
+ | PCI_BRIDGE_CTL_FAST_BACK);
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
+ break;
+
+ case PCI_CLASS_BRIDGE_CARDBUS:
+ pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL,
+ &status);
+ status |= PCI_CB_BRIDGE_CTL_PARITY
+ | PCI_CB_BRIDGE_CTL_MASTER_ABORT;
+ pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL,
+ status);
+ break;
+ }
+ }
+
+ /*
+ * Now walk the devices again, this time setting them up.
+ */
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ u16 cmd;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd |= features;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+ L1_CACHE_BYTES >> 2);
+ }
+
+ /*
+ * Propagate the flags to the PCI bridge.
+ */
+ if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ if (features & PCI_COMMAND_FAST_BACK)
+ bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
+ if (features & PCI_COMMAND_PARITY)
+ bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
+ }
+
+ /*
+ * Report what we did for this bus
+ */
+ printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
+ bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
+}
+#ifdef CONFIG_HOTPLUG
+EXPORT_SYMBOL(pcibios_fixup_bus);
+#endif
+
+static int __init pci_common_init(void)
+{
+ struct pci_bus *puv3_bus;
+
+ pci_puv3_preinit();
+
+ puv3_bus = pci_scan_bus(0, &pci_puv3_ops, NULL);
+
+ if (!puv3_bus)
+ panic("PCI: unable to scan bus!");
+
+ pci_fixup_irqs(pci_common_swizzle, pci_puv3_map_irq);
+
+ if (!use_firmware) {
+ /*
+ * Size the bridge windows.
+ */
+ pci_bus_size_bridges(puv3_bus);
+
+ /*
+ * Assign resources.
+ */
+ pci_bus_assign_resources(puv3_bus);
+ }
+
+ /*
+ * Tell drivers about devices found.
+ */
+ pci_bus_add_devices(puv3_bus);
+
+ return 0;
+}
+subsys_initcall(pci_common_init);
+
+char * __devinit pcibios_setup(char *str)
+{
+ if (!strcmp(str, "debug")) {
+ debug_pci = 1;
+ return NULL;
+ } else if (!strcmp(str, "firmware")) {
+ use_firmware = 1;
+ return NULL;
+ }
+ return str;
+}
+
+/*
+ * From arch/i386/kernel/pci-i386.c:
+ *
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ resource_size_t start = res->start;
+
+ if (res->flags & IORESOURCE_IO && start & 0x300)
+ start = (start + 0x3ff) & ~0x3ff;
+
+ start = (start + align - 1) & ~(align - 1);
+
+ return start;
+}
+
+/**
+ * pcibios_enable_device - Enable I/O and memory.
+ * @dev: PCI device to be enabled
+ */
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ int idx;
+ struct resource *r;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+ for (idx = 0; idx < 6; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1 << idx)))
+ continue;
+
+ r = dev->resource + idx;
+ if (!r->start && r->end) {
+ printk(KERN_ERR "PCI: Device %s not available because"
+ " of resource collisions\n", pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+
+ /*
+ * Bridges (eg, cardbus bridges) need to be fully enabled
+ */
+ if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+ cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+
+ if (cmd != old_cmd) {
+ printk("PCI: enabling device %s (%04x -> %04x)\n",
+ pci_name(dev), old_cmd, cmd);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+ return 0;
+}
+
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine)
+{
+ unsigned long phys;
+
+ if (mmap_state == pci_mmap_io)
+ return -EINVAL;
+
+ phys = vma->vm_pgoff;
+
+ /*
+ * Mark this as IO
+ */
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ if (remap_pfn_range(vma, vma->vm_start, phys,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot))
+ return -EAGAIN;
+
+ return 0;
+}
diff --git a/arch/unicore32/kernel/pm.c b/arch/unicore32/kernel/pm.c
new file mode 100644
index 00000000000..784bc2db3b2
--- /dev/null
+++ b/arch/unicore32/kernel/pm.c
@@ -0,0 +1,123 @@
+/*
+ * linux/arch/unicore32/kernel/pm.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/pm.h>
+
+#include "setup.h"
+
+struct puv3_cpu_pm_fns *puv3_cpu_pm_fns;
+static unsigned long *sleep_save;
+
+int puv3_pm_enter(suspend_state_t state)
+{
+ unsigned long sleep_save_checksum = 0, checksum = 0;
+ int i;
+
+ /* skip registers saving for standby */
+ if (state != PM_SUSPEND_STANDBY) {
+ puv3_cpu_pm_fns->save(sleep_save);
+ /* before sleeping, calculate and save a checksum */
+ for (i = 0; i < puv3_cpu_pm_fns->save_count - 1; i++)
+ sleep_save_checksum += sleep_save[i];
+ }
+
+ /* *** go zzz *** */
+ puv3_cpu_pm_fns->enter(state);
+ cpu_init();
+#ifdef CONFIG_INPUT_KEYBOARD
+ puv3_ps2_init();
+#endif
+#ifdef CONFIG_PCI
+ pci_puv3_preinit();
+#endif
+ if (state != PM_SUSPEND_STANDBY) {
+ /* after sleeping, validate the checksum */
+ for (i = 0; i < puv3_cpu_pm_fns->save_count - 1; i++)
+ checksum += sleep_save[i];
+
+ /* if invalid, display message and wait for a hardware reset */
+ if (checksum != sleep_save_checksum) {
+ while (1)
+ puv3_cpu_pm_fns->enter(state);
+ }
+ puv3_cpu_pm_fns->restore(sleep_save);
+ }
+
+ pr_debug("*** made it back from resume\n");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(puv3_pm_enter);
+
+unsigned long sleep_phys_sp(void *sp)
+{
+ return virt_to_phys(sp);
+}
+
+static int puv3_pm_valid(suspend_state_t state)
+{
+ if (puv3_cpu_pm_fns)
+ return puv3_cpu_pm_fns->valid(state);
+
+ return -EINVAL;
+}
+
+static int puv3_pm_prepare(void)
+{
+ int ret = 0;
+
+ if (puv3_cpu_pm_fns && puv3_cpu_pm_fns->prepare)
+ ret = puv3_cpu_pm_fns->prepare();
+
+ return ret;
+}
+
+static void puv3_pm_finish(void)
+{
+ if (puv3_cpu_pm_fns && puv3_cpu_pm_fns->finish)
+ puv3_cpu_pm_fns->finish();
+}
+
+static struct platform_suspend_ops puv3_pm_ops = {
+ .valid = puv3_pm_valid,
+ .enter = puv3_pm_enter,
+ .prepare = puv3_pm_prepare,
+ .finish = puv3_pm_finish,
+};
+
+static int __init puv3_pm_init(void)
+{
+ if (!puv3_cpu_pm_fns) {
+ printk(KERN_ERR "no valid puv3_cpu_pm_fns defined\n");
+ return -EINVAL;
+ }
+
+ sleep_save = kmalloc(puv3_cpu_pm_fns->save_count
+ * sizeof(unsigned long), GFP_KERNEL);
+ if (!sleep_save) {
+ printk(KERN_ERR "failed to alloc memory for pm save\n");
+ return -ENOMEM;
+ }
+
+ suspend_set_ops(&puv3_pm_ops);
+ return 0;
+}
+
+device_initcall(puv3_pm_init);
diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
new file mode 100644
index 00000000000..ba401df971e
--- /dev/null
+++ b/arch/unicore32/kernel/process.c
@@ -0,0 +1,389 @@
+/*
+ * linux/arch/unicore32/kernel/process.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <stdarg.h>
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+#include <linux/kallsyms.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/elfcore.h>
+#include <linux/pm.h>
+#include <linux/tick.h>
+#include <linux/utsname.h>
+#include <linux/uaccess.h>
+#include <linux/random.h>
+#include <linux/gpio.h>
+#include <linux/stacktrace.h>
+
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/stacktrace.h>
+
+#include "setup.h"
+
+static const char * const processor_modes[] = {
+ "UK00", "UK01", "UK02", "UK03", "UK04", "UK05", "UK06", "UK07",
+ "UK08", "UK09", "UK0A", "UK0B", "UK0C", "UK0D", "UK0E", "UK0F",
+ "USER", "REAL", "INTR", "PRIV", "UK14", "UK15", "UK16", "ABRT",
+ "UK18", "UK19", "UK1A", "EXTN", "UK1C", "UK1D", "UK1E", "SUSR"
+};
+
+/*
+ * The idle thread, has rather strange semantics for calling pm_idle,
+ * but this is what x86 does and we need to do the same, so that
+ * things like cpuidle get called in the same way.
+ */
+void cpu_idle(void)
+{
+ /* endless idle loop with no priority at all */
+ while (1) {
+ tick_nohz_stop_sched_tick(1);
+ while (!need_resched()) {
+ local_irq_disable();
+ stop_critical_timings();
+ cpu_do_idle();
+ local_irq_enable();
+ start_critical_timings();
+ }
+ tick_nohz_restart_sched_tick();
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
+ }
+}
+
+static char reboot_mode = 'h';
+
+int __init reboot_setup(char *str)
+{
+ reboot_mode = str[0];
+ return 1;
+}
+
+__setup("reboot=", reboot_setup);
+
+void machine_halt(void)
+{
+ gpio_set_value(GPO_SOFT_OFF, 0);
+}
+
+/*
+ * Function pointers to optional machine specific functions
+ */
+void (*pm_power_off)(void) = NULL;
+
+void machine_power_off(void)
+{
+ if (pm_power_off)
+ pm_power_off();
+ machine_halt();
+}
+
+void machine_restart(char *cmd)
+{
+ /* Disable interrupts first */
+ local_irq_disable();
+
+ /*
+ * Tell the mm system that we are going to reboot -
+ * we may need it to insert some 1:1 mappings so that
+ * soft boot works.
+ */
+ setup_mm_for_reboot(reboot_mode);
+
+ /* Clean and invalidate caches */
+ flush_cache_all();
+
+ /* Turn off caching */
+ cpu_proc_fin();
+
+ /* Push out any further dirty data, and ensure cache is empty */
+ flush_cache_all();
+
+ /*
+ * Now handle reboot code.
+ */
+ if (reboot_mode == 's') {
+ /* Jump into ROM at address 0xffff0000 */
+ cpu_reset(VECTORS_BASE);
+ } else {
+ writel(0x00002001, PM_PLLSYSCFG); /* cpu clk = 250M */
+ writel(0x00100800, PM_PLLDDRCFG); /* ddr clk = 44M */
+ writel(0x00002001, PM_PLLVGACFG); /* vga clk = 250M */
+
+ /* Use on-chip reset capability */
+ /* following instructions must be in one icache line */
+ __asm__ __volatile__(
+ " .align 5\n\t"
+ " stw %1, [%0]\n\t"
+ "201: ldw r0, [%0]\n\t"
+ " cmpsub.a r0, #0\n\t"
+ " bne 201b\n\t"
+ " stw %3, [%2]\n\t"
+ " nop; nop; nop\n\t"
+ /* prefetch 3 instructions at most */
+ :
+ : "r" (PM_PMCR),
+ "r" (PM_PMCR_CFBSYS | PM_PMCR_CFBDDR
+ | PM_PMCR_CFBVGA),
+ "r" (RESETC_SWRR),
+ "r" (RESETC_SWRR_SRB)
+ : "r0", "memory");
+ }
+
+ /*
+ * Whoops - the architecture was unable to reboot.
+ * Tell the user!
+ */
+ mdelay(1000);
+ printk(KERN_EMERG "Reboot failed -- System halted\n");
+ do { } while (1);
+}
+
+void __show_regs(struct pt_regs *regs)
+{
+ unsigned long flags;
+ char buf[64];
+
+ printk(KERN_DEFAULT "CPU: %d %s (%s %.*s)\n",
+ raw_smp_processor_id(), print_tainted(),
+ init_utsname()->release,
+ (int)strcspn(init_utsname()->version, " "),
+ init_utsname()->version);
+ print_symbol("PC is at %s\n", instruction_pointer(regs));
+ print_symbol("LR is at %s\n", regs->UCreg_lr);
+ printk(KERN_DEFAULT "pc : [<%08lx>] lr : [<%08lx>] psr: %08lx\n"
+ "sp : %08lx ip : %08lx fp : %08lx\n",
+ regs->UCreg_pc, regs->UCreg_lr, regs->UCreg_asr,
+ regs->UCreg_sp, regs->UCreg_ip, regs->UCreg_fp);
+ printk(KERN_DEFAULT "r26: %08lx r25: %08lx r24: %08lx\n",
+ regs->UCreg_26, regs->UCreg_25,
+ regs->UCreg_24);
+ printk(KERN_DEFAULT "r23: %08lx r22: %08lx r21: %08lx r20: %08lx\n",
+ regs->UCreg_23, regs->UCreg_22,
+ regs->UCreg_21, regs->UCreg_20);
+ printk(KERN_DEFAULT "r19: %08lx r18: %08lx r17: %08lx r16: %08lx\n",
+ regs->UCreg_19, regs->UCreg_18,
+ regs->UCreg_17, regs->UCreg_16);
+ printk(KERN_DEFAULT "r15: %08lx r14: %08lx r13: %08lx r12: %08lx\n",
+ regs->UCreg_15, regs->UCreg_14,
+ regs->UCreg_13, regs->UCreg_12);
+ printk(KERN_DEFAULT "r11: %08lx r10: %08lx r9 : %08lx r8 : %08lx\n",
+ regs->UCreg_11, regs->UCreg_10,
+ regs->UCreg_09, regs->UCreg_08);
+ printk(KERN_DEFAULT "r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
+ regs->UCreg_07, regs->UCreg_06,
+ regs->UCreg_05, regs->UCreg_04);
+ printk(KERN_DEFAULT "r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
+ regs->UCreg_03, regs->UCreg_02,
+ regs->UCreg_01, regs->UCreg_00);
+
+ flags = regs->UCreg_asr;
+ buf[0] = flags & PSR_S_BIT ? 'S' : 's';
+ buf[1] = flags & PSR_Z_BIT ? 'Z' : 'z';
+ buf[2] = flags & PSR_C_BIT ? 'C' : 'c';
+ buf[3] = flags & PSR_V_BIT ? 'V' : 'v';
+ buf[4] = '\0';
+
+ printk(KERN_DEFAULT "Flags: %s INTR o%s REAL o%s Mode %s Segment %s\n",
+ buf, interrupts_enabled(regs) ? "n" : "ff",
+ fast_interrupts_enabled(regs) ? "n" : "ff",
+ processor_modes[processor_mode(regs)],
+ segment_eq(get_fs(), get_ds()) ? "kernel" : "user");
+ {
+ unsigned int ctrl;
+
+ buf[0] = '\0';
+ {
+ unsigned int transbase;
+ asm("movc %0, p0.c2, #0\n"
+ : "=r" (transbase));
+ snprintf(buf, sizeof(buf), " Table: %08x", transbase);
+ }
+ asm("movc %0, p0.c1, #0\n" : "=r" (ctrl));
+
+ printk(KERN_DEFAULT "Control: %08x%s\n", ctrl, buf);
+ }
+}
+
+void show_regs(struct pt_regs *regs)
+{
+ printk(KERN_DEFAULT "\n");
+ printk(KERN_DEFAULT "Pid: %d, comm: %20s\n",
+ task_pid_nr(current), current->comm);
+ __show_regs(regs);
+ __backtrace();
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+}
+
+void flush_thread(void)
+{
+ struct thread_info *thread = current_thread_info();
+ struct task_struct *tsk = current;
+
+ memset(thread->used_cp, 0, sizeof(thread->used_cp));
+ memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
+#ifdef CONFIG_UNICORE_FPU_F64
+ memset(&thread->fpstate, 0, sizeof(struct fp_state));
+#endif
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+}
+
+asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
+
+int
+copy_thread(unsigned long clone_flags, unsigned long stack_start,
+ unsigned long stk_sz, struct task_struct *p, struct pt_regs *regs)
+{
+ struct thread_info *thread = task_thread_info(p);
+ struct pt_regs *childregs = task_pt_regs(p);
+
+ *childregs = *regs;
+ childregs->UCreg_00 = 0;
+ childregs->UCreg_sp = stack_start;
+
+ memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save));
+ thread->cpu_context.sp = (unsigned long)childregs;
+ thread->cpu_context.pc = (unsigned long)ret_from_fork;
+
+ if (clone_flags & CLONE_SETTLS)
+ childregs->UCreg_16 = regs->UCreg_03;
+
+ return 0;
+}
+
+/*
+ * Fill in the task's elfregs structure for a core dump.
+ */
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
+{
+ elf_core_copy_regs(elfregs, task_pt_regs(t));
+ return 1;
+}
+
+/*
+ * fill in the fpe structure for a core dump...
+ */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fp)
+{
+ struct thread_info *thread = current_thread_info();
+ int used_math = thread->used_cp[1] | thread->used_cp[2];
+
+#ifdef CONFIG_UNICORE_FPU_F64
+ if (used_math)
+ memcpy(fp, &thread->fpstate, sizeof(*fp));
+#endif
+ return used_math != 0;
+}
+EXPORT_SYMBOL(dump_fpu);
+
+/*
+ * Shuffle the argument into the correct register before calling the
+ * thread function. r1 is the thread argument, r2 is the pointer to
+ * the thread function, and r3 points to the exit function.
+ */
+asm(".pushsection .text\n"
+" .align\n"
+" .type kernel_thread_helper, #function\n"
+"kernel_thread_helper:\n"
+" mov.a asr, r7\n"
+" mov r0, r4\n"
+" mov lr, r6\n"
+" mov pc, r5\n"
+" .size kernel_thread_helper, . - kernel_thread_helper\n"
+" .popsection");
+
+/*
+ * Create a kernel thread.
+ */
+pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+ struct pt_regs regs;
+
+ memset(&regs, 0, sizeof(regs));
+
+ regs.UCreg_04 = (unsigned long)arg;
+ regs.UCreg_05 = (unsigned long)fn;
+ regs.UCreg_06 = (unsigned long)do_exit;
+ regs.UCreg_07 = PRIV_MODE;
+ regs.UCreg_pc = (unsigned long)kernel_thread_helper;
+ regs.UCreg_asr = regs.UCreg_07 | PSR_I_BIT;
+
+ return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
+}
+EXPORT_SYMBOL(kernel_thread);
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ struct stackframe frame;
+ int count = 0;
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+
+ frame.fp = thread_saved_fp(p);
+ frame.sp = thread_saved_sp(p);
+ frame.lr = 0; /* recovered from the stack */
+ frame.pc = thread_saved_pc(p);
+ do {
+ int ret = unwind_frame(&frame);
+ if (ret < 0)
+ return 0;
+ if (!in_sched_functions(frame.pc))
+ return frame.pc;
+ } while ((count++) < 16);
+ return 0;
+}
+
+unsigned long arch_randomize_brk(struct mm_struct *mm)
+{
+ unsigned long range_end = mm->brk + 0x02000000;
+ return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+}
+
+/*
+ * The vectors page is always readable from user space for the
+ * atomic helpers and the signal restart code. Let's declare a mapping
+ * for it so it is visible through ptrace and /proc/<pid>/mem.
+ */
+
+int vectors_user_mapping(void)
+{
+ struct mm_struct *mm = current->mm;
+ return install_special_mapping(mm, 0xffff0000, PAGE_SIZE,
+ VM_READ | VM_EXEC |
+ VM_MAYREAD | VM_MAYEXEC |
+ VM_ALWAYSDUMP | VM_RESERVED,
+ NULL);
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+ return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL;
+}
diff --git a/arch/unicore32/kernel/ptrace.c b/arch/unicore32/kernel/ptrace.c
new file mode 100644
index 00000000000..9f07c08da05
--- /dev/null
+++ b/arch/unicore32/kernel/ptrace.c
@@ -0,0 +1,149 @@
+/*
+ * linux/arch/unicore32/kernel/ptrace.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * By Ross Biro 1/23/92
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/signal.h>
+#include <linux/uaccess.h>
+
+/*
+ * this routine will get a word off of the processes privileged stack.
+ * the offset is how far from the base addr as stored in the THREAD.
+ * this routine assumes that all the privileged stacks are in our
+ * data space.
+ */
+static inline long get_user_reg(struct task_struct *task, int offset)
+{
+ return task_pt_regs(task)->uregs[offset];
+}
+
+/*
+ * this routine will put a word on the processes privileged stack.
+ * the offset is how far from the base addr as stored in the THREAD.
+ * this routine assumes that all the privileged stacks are in our
+ * data space.
+ */
+static inline int
+put_user_reg(struct task_struct *task, int offset, long data)
+{
+ struct pt_regs newregs, *regs = task_pt_regs(task);
+ int ret = -EINVAL;
+
+ newregs = *regs;
+ newregs.uregs[offset] = data;
+
+ if (valid_user_regs(&newregs)) {
+ regs->uregs[offset] = data;
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ */
+void ptrace_disable(struct task_struct *child)
+{
+}
+
+/*
+ * We actually access the pt_regs stored on the kernel stack.
+ */
+static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
+ unsigned long __user *ret)
+{
+ unsigned long tmp;
+
+ tmp = 0;
+ if (off < sizeof(struct pt_regs))
+ tmp = get_user_reg(tsk, off >> 2);
+
+ return put_user(tmp, ret);
+}
+
+/*
+ * We actually access the pt_regs stored on the kernel stack.
+ */
+static int ptrace_write_user(struct task_struct *tsk, unsigned long off,
+ unsigned long val)
+{
+ if (off >= sizeof(struct pt_regs))
+ return 0;
+
+ return put_user_reg(tsk, off >> 2, val);
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+ unsigned long addr, unsigned long data)
+{
+ int ret;
+ unsigned long __user *datap = (unsigned long __user *) data;
+
+ switch (request) {
+ case PTRACE_PEEKUSR:
+ ret = ptrace_read_user(child, addr, datap);
+ break;
+
+ case PTRACE_POKEUSR:
+ ret = ptrace_write_user(child, addr, data);
+ break;
+
+ case PTRACE_GET_THREAD_AREA:
+ ret = put_user(task_pt_regs(child)->UCreg_16,
+ datap);
+ break;
+
+ default:
+ ret = ptrace_request(child, request, addr, data);
+ break;
+ }
+
+ return ret;
+}
+
+asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
+{
+ unsigned long ip;
+
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ return scno;
+ if (!(current->ptrace & PT_PTRACED))
+ return scno;
+
+ /*
+ * Save IP. IP is used to denote syscall entry/exit:
+ * IP = 0 -> entry, = 1 -> exit
+ */
+ ip = regs->UCreg_ip;
+ regs->UCreg_ip = why;
+
+ current_thread_info()->syscall = scno;
+
+ /* the 0x80 provides a way for the tracing parent to distinguish
+ between a syscall stop and SIGTRAP delivery */
+ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+ ? 0x80 : 0));
+ /*
+ * this isn't the same as continuing with a signal, but it will do
+ * for normal use. strace only continues with a signal if the
+ * stopping signal is not SIGTRAP. -brl
+ */
+ if (current->exit_code) {
+ send_sig(current->exit_code, current, 1);
+ current->exit_code = 0;
+ }
+ regs->UCreg_ip = ip;
+
+ return current_thread_info()->syscall;
+}
diff --git a/arch/unicore32/kernel/puv3-core.c b/arch/unicore32/kernel/puv3-core.c
new file mode 100644
index 00000000000..8b1b6beb858
--- /dev/null
+++ b/arch/unicore32/kernel/puv3-core.c
@@ -0,0 +1,285 @@
+/*
+ * linux/arch/unicore32/kernel/puv3-core.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/usb/musb.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/pm.h>
+
+/*
+ * This is the PKUnity sched_clock implementation. This has
+ * a resolution of 271ns, and a maximum value of 32025597s (370 days).
+ *
+ * The return value is guaranteed to be monotonic in that range as
+ * long as there is always less than 582 seconds between successive
+ * calls to this function.
+ *
+ * ( * 1E9 / CLOCK_TICK_RATE ) -> about 2235/32
+ */
+unsigned long long sched_clock(void)
+{
+ unsigned long long v = cnt32_to_63(readl(OST_OSCR));
+
+ /* original conservative method, but overflow frequently
+ * v *= NSEC_PER_SEC >> 12;
+ * do_div(v, CLOCK_TICK_RATE >> 12);
+ */
+ v = ((v & 0x7fffffffffffffffULL) * 2235) >> 5;
+
+ return v;
+}
+
+static struct resource puv3_usb_resources[] = {
+ /* order is significant! */
+ {
+ .start = io_v2p(PKUNITY_USB_BASE),
+ .end = io_v2p(PKUNITY_USB_BASE) + 0x3ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_USB,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct musb_hdrc_config puv3_usb_config[] = {
+ {
+ .num_eps = 16,
+ .multipoint = 1,
+#ifdef CONFIG_USB_INVENTRA_DMA
+ .dma = 1,
+ .dma_channels = 8,
+#endif
+ },
+};
+
+static struct musb_hdrc_platform_data puv3_usb_plat = {
+ .mode = MUSB_HOST,
+ .min_power = 100,
+ .clock = 0,
+ .config = puv3_usb_config,
+};
+
+static struct resource puv3_mmc_resources[] = {
+ [0] = {
+ .start = io_v2p(PKUNITY_SDC_BASE),
+ .end = io_v2p(PKUNITY_SDC_BASE) + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_SDC,
+ .end = IRQ_SDC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource puv3_unigfx_resources[] = {
+ [0] = {
+ .start = io_v2p(PKUNITY_UNIGFX_BASE),
+ .end = io_v2p(PKUNITY_UNIGFX_BASE) + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PKUNITY_UNIGFX_MMAP_BASE,
+ .end = PKUNITY_UNIGFX_MMAP_BASE + PKUNITY_UNIGFX_MMAP_SIZE,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource puv3_rtc_resources[] = {
+ [0] = {
+ .start = io_v2p(PKUNITY_RTC_BASE),
+ .end = io_v2p(PKUNITY_RTC_BASE) + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTCAlarm,
+ .end = IRQ_RTCAlarm,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_RTC,
+ .end = IRQ_RTC,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct resource puv3_pwm_resources[] = {
+ [0] = {
+ .start = io_v2p(PKUNITY_OST_BASE) + 0x80,
+ .end = io_v2p(PKUNITY_OST_BASE) + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource puv3_uart0_resources[] = {
+ [0] = {
+ .start = io_v2p(PKUNITY_UART0_BASE),
+ .end = io_v2p(PKUNITY_UART0_BASE) + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_UART0,
+ .end = IRQ_UART0,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct resource puv3_uart1_resources[] = {
+ [0] = {
+ .start = io_v2p(PKUNITY_UART1_BASE),
+ .end = io_v2p(PKUNITY_UART1_BASE) + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_UART1,
+ .end = IRQ_UART1,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct resource puv3_umal_resources[] = {
+ [0] = {
+ .start = io_v2p(PKUNITY_UMAL_BASE),
+ .end = io_v2p(PKUNITY_UMAL_BASE) + 0x1fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_UMAL,
+ .end = IRQ_UMAL,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+#ifdef CONFIG_PUV3_PM
+
+#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
+#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
+
+/*
+ * List of global PXA peripheral registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+enum {
+ SLEEP_SAVE_PM_PLLDDRCFG,
+ SLEEP_SAVE_COUNT
+};
+
+
+static void puv3_cpu_pm_save(unsigned long *sleep_save)
+{
+/* SAVE(PM_PLLDDRCFG); */
+}
+
+static void puv3_cpu_pm_restore(unsigned long *sleep_save)
+{
+/* RESTORE(PM_PLLDDRCFG); */
+}
+
+static int puv3_cpu_pm_prepare(void)
+{
+ /* set resume return address */
+ writel(virt_to_phys(puv3_cpu_resume), PM_DIVCFG);
+ return 0;
+}
+
+static void puv3_cpu_pm_enter(suspend_state_t state)
+{
+ /* Clear reset status */
+ writel(RESETC_RSSR_HWR | RESETC_RSSR_WDR
+ | RESETC_RSSR_SMR | RESETC_RSSR_SWR, RESETC_RSSR);
+
+ switch (state) {
+/* case PM_SUSPEND_ON:
+ puv3_cpu_idle();
+ break; */
+ case PM_SUSPEND_MEM:
+ puv3_cpu_pm_prepare();
+ puv3_cpu_suspend(PM_PMCR_SFB);
+ break;
+ }
+}
+
+static int puv3_cpu_pm_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM;
+}
+
+static void puv3_cpu_pm_finish(void)
+{
+ /* ensure not to come back here if it wasn't intended */
+ /* PSPR = 0; */
+}
+
+static struct puv3_cpu_pm_fns puv3_cpu_pm_fnss = {
+ .save_count = SLEEP_SAVE_COUNT,
+ .valid = puv3_cpu_pm_valid,
+ .save = puv3_cpu_pm_save,
+ .restore = puv3_cpu_pm_restore,
+ .enter = puv3_cpu_pm_enter,
+ .prepare = puv3_cpu_pm_prepare,
+ .finish = puv3_cpu_pm_finish,
+};
+
+static void __init puv3_init_pm(void)
+{
+ puv3_cpu_pm_fns = &puv3_cpu_pm_fnss;
+}
+#else
+static inline void puv3_init_pm(void) {}
+#endif
+
+void puv3_ps2_init(void)
+{
+ struct clk *bclk32;
+
+ bclk32 = clk_get(NULL, "BUS32_CLK");
+ writel(clk_get_rate(bclk32) / 200000, PS2_CNT); /* should > 5us */
+}
+
+void __init puv3_core_init(void)
+{
+ puv3_init_pm();
+ puv3_ps2_init();
+
+ platform_device_register_simple("PKUnity-v3-RTC", -1,
+ puv3_rtc_resources, ARRAY_SIZE(puv3_rtc_resources));
+ platform_device_register_simple("PKUnity-v3-UMAL", -1,
+ puv3_umal_resources, ARRAY_SIZE(puv3_umal_resources));
+ platform_device_register_simple("PKUnity-v3-MMC", -1,
+ puv3_mmc_resources, ARRAY_SIZE(puv3_mmc_resources));
+ platform_device_register_simple("PKUnity-v3-UNIGFX", -1,
+ puv3_unigfx_resources, ARRAY_SIZE(puv3_unigfx_resources));
+ platform_device_register_simple("PKUnity-v3-PWM", -1,
+ puv3_pwm_resources, ARRAY_SIZE(puv3_pwm_resources));
+ platform_device_register_simple("PKUnity-v3-UART", 0,
+ puv3_uart0_resources, ARRAY_SIZE(puv3_uart0_resources));
+ platform_device_register_simple("PKUnity-v3-UART", 1,
+ puv3_uart1_resources, ARRAY_SIZE(puv3_uart1_resources));
+ platform_device_register_simple("PKUnity-v3-AC97", -1, NULL, 0);
+ platform_device_register_resndata(&platform_bus, "musb_hdrc", -1,
+ puv3_usb_resources, ARRAY_SIZE(puv3_usb_resources),
+ &puv3_usb_plat, sizeof(puv3_usb_plat));
+}
+
diff --git a/arch/unicore32/kernel/puv3-nb0916.c b/arch/unicore32/kernel/puv3-nb0916.c
new file mode 100644
index 00000000000..e731c561ed4
--- /dev/null
+++ b/arch/unicore32/kernel/puv3-nb0916.c
@@ -0,0 +1,145 @@
+/*
+ * linux/arch/unicore32/kernel/puv3-nb0916.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <mach/hardware.h>
+
+static struct physmap_flash_data physmap_flash_data = {
+ .width = 1,
+};
+
+static struct resource physmap_flash_resource = {
+ .start = 0xFFF80000,
+ .end = 0xFFFFFFFF,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource puv3_i2c_resources[] = {
+ [0] = {
+ .start = io_v2p(PKUNITY_I2C_BASE),
+ .end = io_v2p(PKUNITY_I2C_BASE) + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_I2C,
+ .end = IRQ_I2C,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_pwm_backlight_data nb0916_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .pwm_period_ns = 70 * 1024,
+};
+
+static struct gpio_keys_button nb0916_gpio_keys[] = {
+ {
+ .type = EV_KEY,
+ .code = KEY_POWER,
+ .gpio = GPI_SOFF_REQ,
+ .desc = "Power Button",
+ .wakeup = 1,
+ .active_low = 1,
+ },
+ {
+ .type = EV_KEY,
+ .code = BTN_TOUCH,
+ .gpio = GPI_BTN_TOUCH,
+ .desc = "Touchpad Button",
+ .wakeup = 1,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data nb0916_gpio_button_data = {
+ .buttons = nb0916_gpio_keys,
+ .nbuttons = ARRAY_SIZE(nb0916_gpio_keys),
+};
+
+static irqreturn_t nb0916_lcdcaseoff_handler(int irq, void *dev_id)
+{
+ if (gpio_get_value(GPI_LCD_CASE_OFF))
+ gpio_set_value(GPO_LCD_EN, 1);
+ else
+ gpio_set_value(GPO_LCD_EN, 0);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t nb0916_overheat_handler(int irq, void *dev_id)
+{
+ machine_halt();
+ /* SYSTEM HALT, NO RETURN */
+ return IRQ_HANDLED;
+}
+
+static struct i2c_board_info __initdata puv3_i2c_devices[] = {
+ { I2C_BOARD_INFO("lm75", I2C_TAR_THERMAL), },
+ { I2C_BOARD_INFO("bq27200", I2C_TAR_PWIC), },
+ { I2C_BOARD_INFO("24c02", I2C_TAR_EEPROM), },
+};
+
+int __init mach_nb0916_init(void)
+{
+ i2c_register_board_info(0, puv3_i2c_devices,
+ ARRAY_SIZE(puv3_i2c_devices));
+
+ platform_device_register_simple("PKUnity-v3-I2C", -1,
+ puv3_i2c_resources, ARRAY_SIZE(puv3_i2c_resources));
+
+ platform_device_register_data(&platform_bus, "pwm-backlight", -1,
+ &nb0916_backlight_data, sizeof(nb0916_backlight_data));
+
+ platform_device_register_data(&platform_bus, "gpio-keys", -1,
+ &nb0916_gpio_button_data, sizeof(nb0916_gpio_button_data));
+
+ platform_device_register_resndata(&platform_bus, "physmap-flash", -1,
+ &physmap_flash_resource, 1,
+ &physmap_flash_data, sizeof(physmap_flash_data));
+
+ if (request_irq(gpio_to_irq(GPI_LCD_CASE_OFF),
+ &nb0916_lcdcaseoff_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "NB0916 lcd case off", NULL) < 0) {
+
+ printk(KERN_DEBUG "LCD-Case-OFF IRQ %d not available\n",
+ gpio_to_irq(GPI_LCD_CASE_OFF));
+ }
+
+ if (request_irq(gpio_to_irq(GPI_OTP_INT), &nb0916_overheat_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "NB0916 overheating protection", NULL) < 0) {
+
+ printk(KERN_DEBUG "Overheating Protection IRQ %d not available\n",
+ gpio_to_irq(GPI_OTP_INT));
+ }
+
+ return 0;
+}
+
+subsys_initcall_sync(mach_nb0916_init);
diff --git a/arch/unicore32/kernel/pwm.c b/arch/unicore32/kernel/pwm.c
new file mode 100644
index 00000000000..4615d51e3ba
--- /dev/null
+++ b/arch/unicore32/kernel/pwm.c
@@ -0,0 +1,263 @@
+/*
+ * linux/arch/unicore32/kernel/pwm.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+#include <mach/hardware.h>
+
+struct pwm_device {
+ struct list_head node;
+ struct platform_device *pdev;
+
+ const char *label;
+ struct clk *clk;
+ int clk_enabled;
+
+ unsigned int use_count;
+ unsigned int pwm_id;
+};
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ */
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+ unsigned long long c;
+ unsigned long period_cycles, prescale, pv, dc;
+
+ if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ c = clk_get_rate(pwm->clk);
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ if (period_cycles < 1)
+ period_cycles = 1;
+ prescale = (period_cycles - 1) / 1024;
+ pv = period_cycles / (prescale + 1) - 1;
+
+ if (prescale > 63)
+ return -EINVAL;
+
+ if (duty_ns == period_ns)
+ dc = OST_PWMDCCR_FDCYCLE;
+ else
+ dc = (pv + 1) * duty_ns / period_ns;
+
+ /* NOTE: the clock to PWM has to be enabled first
+ * before writing to the registers
+ */
+ clk_enable(pwm->clk);
+ OST_PWMPWCR = prescale;
+ OST_PWMDCCR = pv - dc;
+ OST_PWMPCR = pv;
+ clk_disable(pwm->clk);
+
+ return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+ int rc = 0;
+
+ if (!pwm->clk_enabled) {
+ rc = clk_enable(pwm->clk);
+ if (!rc)
+ pwm->clk_enabled = 1;
+ }
+ return rc;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+ if (pwm->clk_enabled) {
+ clk_disable(pwm->clk);
+ pwm->clk_enabled = 0;
+ }
+}
+EXPORT_SYMBOL(pwm_disable);
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+ struct pwm_device *pwm;
+ int found = 0;
+
+ mutex_lock(&pwm_lock);
+
+ list_for_each_entry(pwm, &pwm_list, node) {
+ if (pwm->pwm_id == pwm_id) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ if (pwm->use_count == 0) {
+ pwm->use_count++;
+ pwm->label = label;
+ } else
+ pwm = ERR_PTR(-EBUSY);
+ } else
+ pwm = ERR_PTR(-ENOENT);
+
+ mutex_unlock(&pwm_lock);
+ return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+
+ if (pwm->use_count) {
+ pwm->use_count--;
+ pwm->label = NULL;
+ } else
+ pr_warning("PWM device already freed\n");
+
+ mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static inline void __add_pwm(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+ list_add_tail(&pwm->node, &pwm_list);
+ mutex_unlock(&pwm_lock);
+}
+
+static struct pwm_device *pwm_probe(struct platform_device *pdev,
+ unsigned int pwm_id, struct pwm_device *parent_pwm)
+{
+ struct pwm_device *pwm;
+ struct resource *r;
+ int ret = 0;
+
+ pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+ if (pwm == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pwm->clk = clk_get(NULL, "OST_CLK");
+ if (IS_ERR(pwm->clk)) {
+ ret = PTR_ERR(pwm->clk);
+ goto err_free;
+ }
+ pwm->clk_enabled = 0;
+
+ pwm->use_count = 0;
+ pwm->pwm_id = pwm_id;
+ pwm->pdev = pdev;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ ret = -ENODEV;
+ goto err_free_clk;
+ }
+
+ r = request_mem_region(r->start, resource_size(r), pdev->name);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ ret = -EBUSY;
+ goto err_free_clk;
+ }
+
+ __add_pwm(pwm);
+ platform_set_drvdata(pdev, pwm);
+ return pwm;
+
+err_free_clk:
+ clk_put(pwm->clk);
+err_free:
+ kfree(pwm);
+ return ERR_PTR(ret);
+}
+
+static int __devinit puv3_pwm_probe(struct platform_device *pdev)
+{
+ struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL);
+
+ if (IS_ERR(pwm))
+ return PTR_ERR(pwm);
+
+ return 0;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+ struct pwm_device *pwm;
+ struct resource *r;
+
+ pwm = platform_get_drvdata(pdev);
+ if (pwm == NULL)
+ return -ENODEV;
+
+ mutex_lock(&pwm_lock);
+ list_del(&pwm->node);
+ mutex_unlock(&pwm_lock);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(r->start, resource_size(r));
+
+ clk_put(pwm->clk);
+ kfree(pwm);
+ return 0;
+}
+
+static struct platform_driver puv3_pwm_driver = {
+ .driver = {
+ .name = "PKUnity-v3-PWM",
+ },
+ .probe = puv3_pwm_probe,
+ .remove = __devexit_p(pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+ int ret = 0;
+
+ ret = platform_driver_register(&puv3_pwm_driver);
+ if (ret) {
+ printk(KERN_ERR "failed to register puv3_pwm_driver\n");
+ return ret;
+ }
+
+ return ret;
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+ platform_driver_unregister(&puv3_pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL v2");
diff --git a/arch/unicore32/kernel/rtc.c b/arch/unicore32/kernel/rtc.c
new file mode 100644
index 00000000000..c5f068295b5
--- /dev/null
+++ b/arch/unicore32/kernel/rtc.c
@@ -0,0 +1,380 @@
+/*
+ * linux/arch/unicore32/kernel/rtc.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/clk.h>
+#include <linux/log2.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+static struct resource *puv3_rtc_mem;
+
+static int puv3_rtc_alarmno = IRQ_RTCAlarm;
+static int puv3_rtc_tickno = IRQ_RTC;
+
+static DEFINE_SPINLOCK(puv3_rtc_pie_lock);
+
+/* IRQ Handlers */
+
+static irqreturn_t puv3_rtc_alarmirq(int irq, void *id)
+{
+ struct rtc_device *rdev = id;
+
+ writel(readl(RTC_RTSR) | RTC_RTSR_AL, RTC_RTSR);
+ rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t puv3_rtc_tickirq(int irq, void *id)
+{
+ struct rtc_device *rdev = id;
+
+ writel(readl(RTC_RTSR) | RTC_RTSR_HZ, RTC_RTSR);
+ rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF);
+ return IRQ_HANDLED;
+}
+
+/* Update control registers */
+static void puv3_rtc_setaie(int to)
+{
+ unsigned int tmp;
+
+ pr_debug("%s: aie=%d\n", __func__, to);
+
+ tmp = readl(RTC_RTSR) & ~RTC_RTSR_ALE;
+
+ if (to)
+ tmp |= RTC_RTSR_ALE;
+
+ writel(tmp, RTC_RTSR);
+}
+
+static int puv3_rtc_setpie(struct device *dev, int enabled)
+{
+ unsigned int tmp;
+
+ pr_debug("%s: pie=%d\n", __func__, enabled);
+
+ spin_lock_irq(&puv3_rtc_pie_lock);
+ tmp = readl(RTC_RTSR) & ~RTC_RTSR_HZE;
+
+ if (enabled)
+ tmp |= RTC_RTSR_HZE;
+
+ writel(tmp, RTC_RTSR);
+ spin_unlock_irq(&puv3_rtc_pie_lock);
+
+ return 0;
+}
+
+static int puv3_rtc_setfreq(struct device *dev, int freq)
+{
+ return 0;
+}
+
+/* Time read/write */
+
+static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
+{
+ rtc_time_to_tm(readl(RTC_RCNR), rtc_tm);
+
+ pr_debug("read time %02x.%02x.%02x %02x/%02x/%02x\n",
+ rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
+ rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
+
+ return 0;
+}
+
+static int puv3_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+ unsigned long rtc_count = 0;
+
+ pr_debug("set time %02d.%02d.%02d %02d/%02d/%02d\n",
+ tm->tm_year, tm->tm_mon, tm->tm_mday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+ rtc_tm_to_time(tm, &rtc_count);
+ writel(rtc_count, RTC_RCNR);
+
+ return 0;
+}
+
+static int puv3_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rtc_time *alm_tm = &alrm->time;
+
+ rtc_time_to_tm(readl(RTC_RTAR), alm_tm);
+
+ alrm->enabled = readl(RTC_RTSR) & RTC_RTSR_ALE;
+
+ pr_debug("read alarm %02x %02x.%02x.%02x %02x/%02x/%02x\n",
+ alrm->enabled,
+ alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday,
+ alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec);
+
+ return 0;
+}
+
+static int puv3_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rtc_time *tm = &alrm->time;
+ unsigned long rtcalarm_count = 0;
+
+ pr_debug("puv3_rtc_setalarm: %d, %02x/%02x/%02x %02x.%02x.%02x\n",
+ alrm->enabled,
+ tm->tm_mday & 0xff, tm->tm_mon & 0xff, tm->tm_year & 0xff,
+ tm->tm_hour & 0xff, tm->tm_min & 0xff, tm->tm_sec);
+
+ rtc_tm_to_time(tm, &rtcalarm_count);
+ writel(rtcalarm_count, RTC_RTAR);
+
+ puv3_rtc_setaie(alrm->enabled);
+
+ if (alrm->enabled)
+ enable_irq_wake(puv3_rtc_alarmno);
+ else
+ disable_irq_wake(puv3_rtc_alarmno);
+
+ return 0;
+}
+
+static int puv3_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+ seq_printf(seq, "periodic_IRQ\t: %s\n",
+ (readl(RTC_RTSR) & RTC_RTSR_HZE) ? "yes" : "no");
+ return 0;
+}
+
+static int puv3_rtc_open(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = request_irq(puv3_rtc_alarmno, puv3_rtc_alarmirq,
+ IRQF_DISABLED, "pkunity-rtc alarm", rtc_dev);
+
+ if (ret) {
+ dev_err(dev, "IRQ%d error %d\n", puv3_rtc_alarmno, ret);
+ return ret;
+ }
+
+ ret = request_irq(puv3_rtc_tickno, puv3_rtc_tickirq,
+ IRQF_DISABLED, "pkunity-rtc tick", rtc_dev);
+
+ if (ret) {
+ dev_err(dev, "IRQ%d error %d\n", puv3_rtc_tickno, ret);
+ goto tick_err;
+ }
+
+ return ret;
+
+ tick_err:
+ free_irq(puv3_rtc_alarmno, rtc_dev);
+ return ret;
+}
+
+static void puv3_rtc_release(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
+
+ /* do not clear AIE here, it may be needed for wake */
+
+ puv3_rtc_setpie(dev, 0);
+ free_irq(puv3_rtc_alarmno, rtc_dev);
+ free_irq(puv3_rtc_tickno, rtc_dev);
+}
+
+static const struct rtc_class_ops puv3_rtcops = {
+ .open = puv3_rtc_open,
+ .release = puv3_rtc_release,
+ .read_time = puv3_rtc_gettime,
+ .set_time = puv3_rtc_settime,
+ .read_alarm = puv3_rtc_getalarm,
+ .set_alarm = puv3_rtc_setalarm,
+ .irq_set_freq = puv3_rtc_setfreq,
+ .irq_set_state = puv3_rtc_setpie,
+ .proc = puv3_rtc_proc,
+};
+
+static void puv3_rtc_enable(struct platform_device *pdev, int en)
+{
+ if (!en) {
+ writel(readl(RTC_RTSR) & ~RTC_RTSR_HZE, RTC_RTSR);
+ } else {
+ /* re-enable the device, and check it is ok */
+
+ if ((readl(RTC_RTSR) & RTC_RTSR_HZE) == 0) {
+ dev_info(&pdev->dev, "rtc disabled, re-enabling\n");
+ writel(readl(RTC_RTSR) | RTC_RTSR_HZE, RTC_RTSR);
+ }
+ }
+}
+
+static int puv3_rtc_remove(struct platform_device *dev)
+{
+ struct rtc_device *rtc = platform_get_drvdata(dev);
+
+ platform_set_drvdata(dev, NULL);
+ rtc_device_unregister(rtc);
+
+ puv3_rtc_setpie(&dev->dev, 0);
+ puv3_rtc_setaie(0);
+
+ release_resource(puv3_rtc_mem);
+ kfree(puv3_rtc_mem);
+
+ return 0;
+}
+
+static int puv3_rtc_probe(struct platform_device *pdev)
+{
+ struct rtc_device *rtc;
+ struct resource *res;
+ int ret;
+
+ pr_debug("%s: probe=%p\n", __func__, pdev);
+
+ /* find the IRQs */
+
+ puv3_rtc_tickno = platform_get_irq(pdev, 1);
+ if (puv3_rtc_tickno < 0) {
+ dev_err(&pdev->dev, "no irq for rtc tick\n");
+ return -ENOENT;
+ }
+
+ puv3_rtc_alarmno = platform_get_irq(pdev, 0);
+ if (puv3_rtc_alarmno < 0) {
+ dev_err(&pdev->dev, "no irq for alarm\n");
+ return -ENOENT;
+ }
+
+ pr_debug("PKUnity_rtc: tick irq %d, alarm irq %d\n",
+ puv3_rtc_tickno, puv3_rtc_alarmno);
+
+ /* get the memory region */
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "failed to get memory region resource\n");
+ return -ENOENT;
+ }
+
+ puv3_rtc_mem = request_mem_region(res->start,
+ res->end-res->start+1,
+ pdev->name);
+
+ if (puv3_rtc_mem == NULL) {
+ dev_err(&pdev->dev, "failed to reserve memory region\n");
+ ret = -ENOENT;
+ goto err_nores;
+ }
+
+ puv3_rtc_enable(pdev, 1);
+
+ puv3_rtc_setfreq(&pdev->dev, 1);
+
+ /* register RTC and exit */
+
+ rtc = rtc_device_register("pkunity", &pdev->dev, &puv3_rtcops,
+ THIS_MODULE);
+
+ if (IS_ERR(rtc)) {
+ dev_err(&pdev->dev, "cannot attach rtc\n");
+ ret = PTR_ERR(rtc);
+ goto err_nortc;
+ }
+
+ /* platform setup code should have handled this; sigh */
+ if (!device_can_wakeup(&pdev->dev))
+ device_init_wakeup(&pdev->dev, 1);
+
+ platform_set_drvdata(pdev, rtc);
+ return 0;
+
+ err_nortc:
+ puv3_rtc_enable(pdev, 0);
+ release_resource(puv3_rtc_mem);
+
+ err_nores:
+ return ret;
+}
+
+#ifdef CONFIG_PM
+
+/* RTC Power management control */
+
+static int ticnt_save;
+
+static int puv3_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ /* save RTAR for anyone using periodic interrupts */
+ ticnt_save = readl(RTC_RTAR);
+ puv3_rtc_enable(pdev, 0);
+ return 0;
+}
+
+static int puv3_rtc_resume(struct platform_device *pdev)
+{
+ puv3_rtc_enable(pdev, 1);
+ writel(ticnt_save, RTC_RTAR);
+ return 0;
+}
+#else
+#define puv3_rtc_suspend NULL
+#define puv3_rtc_resume NULL
+#endif
+
+static struct platform_driver puv3_rtcdrv = {
+ .probe = puv3_rtc_probe,
+ .remove = __devexit_p(puv3_rtc_remove),
+ .suspend = puv3_rtc_suspend,
+ .resume = puv3_rtc_resume,
+ .driver = {
+ .name = "PKUnity-v3-RTC",
+ .owner = THIS_MODULE,
+ }
+};
+
+static char __initdata banner[] = "PKUnity-v3 RTC, (c) 2009 PKUnity Co.\n";
+
+static int __init puv3_rtc_init(void)
+{
+ printk(banner);
+ return platform_driver_register(&puv3_rtcdrv);
+}
+
+static void __exit puv3_rtc_exit(void)
+{
+ platform_driver_unregister(&puv3_rtcdrv);
+}
+
+module_init(puv3_rtc_init);
+module_exit(puv3_rtc_exit);
+
+MODULE_DESCRIPTION("RTC Driver for the PKUnity v3 chip");
+MODULE_AUTHOR("Hu Dongliang");
+MODULE_LICENSE("GPL v2");
+
diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c
new file mode 100644
index 00000000000..1e175a82844
--- /dev/null
+++ b/arch/unicore32/kernel/setup.c
@@ -0,0 +1,360 @@
+/*
+ * linux/arch/unicore32/kernel/setup.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/utsname.h>
+#include <linux/initrd.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/screen_info.h>
+#include <linux/init.h>
+#include <linux/root_dev.h>
+#include <linux/cpu.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/memblock.h>
+#include <linux/elf.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/traps.h>
+
+#include "setup.h"
+
+#ifndef MEM_SIZE
+#define MEM_SIZE (16*1024*1024)
+#endif
+
+struct stack {
+ u32 irq[3];
+ u32 abt[3];
+ u32 und[3];
+} ____cacheline_aligned;
+
+static struct stack stacks[NR_CPUS];
+
+char elf_platform[ELF_PLATFORM_SIZE];
+EXPORT_SYMBOL(elf_platform);
+
+static char __initdata cmd_line[COMMAND_LINE_SIZE];
+
+static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
+
+/*
+ * Standard memory resources
+ */
+static struct resource mem_res[] = {
+ {
+ .name = "Video RAM",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .name = "Kernel text",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .name = "Kernel data",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+#define video_ram mem_res[0]
+#define kernel_code mem_res[1]
+#define kernel_data mem_res[2]
+
+/*
+ * These functions re-use the assembly code in head.S, which
+ * already provide the required functionality.
+ */
+static void __init setup_processor(void)
+{
+ printk(KERN_DEFAULT "CPU: UniCore-II [%08x] revision %d, cr=%08lx\n",
+ uc32_cpuid, (int)(uc32_cpuid >> 16) & 15, cr_alignment);
+
+ sprintf(init_utsname()->machine, "puv3");
+ sprintf(elf_platform, "ucv2");
+}
+
+/*
+ * cpu_init - initialise one CPU.
+ *
+ * cpu_init sets up the per-CPU stacks.
+ */
+void cpu_init(void)
+{
+ unsigned int cpu = smp_processor_id();
+ struct stack *stk = &stacks[cpu];
+
+ /*
+ * setup stacks for re-entrant exception handlers
+ */
+ __asm__ (
+ "mov.a asr, %1\n\t"
+ "add sp, %0, %2\n\t"
+ "mov.a asr, %3\n\t"
+ "add sp, %0, %4\n\t"
+ "mov.a asr, %5\n\t"
+ "add sp, %0, %6\n\t"
+ "mov.a asr, %7"
+ :
+ : "r" (stk),
+ "r" (PSR_R_BIT | PSR_I_BIT | INTR_MODE),
+ "I" (offsetof(struct stack, irq[0])),
+ "r" (PSR_R_BIT | PSR_I_BIT | ABRT_MODE),
+ "I" (offsetof(struct stack, abt[0])),
+ "r" (PSR_R_BIT | PSR_I_BIT | EXTN_MODE),
+ "I" (offsetof(struct stack, und[0])),
+ "r" (PSR_R_BIT | PSR_I_BIT | PRIV_MODE)
+ : "r30", "cc");
+}
+
+static int __init uc32_add_memory(unsigned long start, unsigned long size)
+{
+ struct membank *bank = &meminfo.bank[meminfo.nr_banks];
+
+ if (meminfo.nr_banks >= NR_BANKS) {
+ printk(KERN_CRIT "NR_BANKS too low, "
+ "ignoring memory at %#lx\n", start);
+ return -EINVAL;
+ }
+
+ /*
+ * Ensure that start/size are aligned to a page boundary.
+ * Size is appropriately rounded down, start is rounded up.
+ */
+ size -= start & ~PAGE_MASK;
+
+ bank->start = PAGE_ALIGN(start);
+ bank->size = size & PAGE_MASK;
+
+ /*
+ * Check whether this memory region has non-zero size or
+ * invalid node number.
+ */
+ if (bank->size == 0)
+ return -EINVAL;
+
+ meminfo.nr_banks++;
+ return 0;
+}
+
+/*
+ * Pick out the memory size. We look for mem=size@start,
+ * where start and size are "size[KkMm]"
+ */
+static int __init early_mem(char *p)
+{
+ static int usermem __initdata = 1;
+ unsigned long size, start;
+ char *endp;
+
+ /*
+ * If the user specifies memory size, we
+ * blow away any automatically generated
+ * size.
+ */
+ if (usermem) {
+ usermem = 0;
+ meminfo.nr_banks = 0;
+ }
+
+ start = PHYS_OFFSET;
+ size = memparse(p, &endp);
+ if (*endp == '@')
+ start = memparse(endp + 1, NULL);
+
+ uc32_add_memory(start, size);
+
+ return 0;
+}
+early_param("mem", early_mem);
+
+static void __init
+request_standard_resources(struct meminfo *mi)
+{
+ struct resource *res;
+ int i;
+
+ kernel_code.start = virt_to_phys(_stext);
+ kernel_code.end = virt_to_phys(_etext - 1);
+ kernel_data.start = virt_to_phys(_sdata);
+ kernel_data.end = virt_to_phys(_end - 1);
+
+ for (i = 0; i < mi->nr_banks; i++) {
+ if (mi->bank[i].size == 0)
+ continue;
+
+ res = alloc_bootmem_low(sizeof(*res));
+ res->name = "System RAM";
+ res->start = mi->bank[i].start;
+ res->end = mi->bank[i].start + mi->bank[i].size - 1;
+ res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
+ request_resource(&iomem_resource, res);
+
+ if (kernel_code.start >= res->start &&
+ kernel_code.end <= res->end)
+ request_resource(res, &kernel_code);
+ if (kernel_data.start >= res->start &&
+ kernel_data.end <= res->end)
+ request_resource(res, &kernel_data);
+ }
+
+ video_ram.start = PKUNITY_UNIGFX_MMAP_BASE;
+ video_ram.end = PKUNITY_UNIGFX_MMAP_BASE + PKUNITY_UNIGFX_MMAP_SIZE;
+ request_resource(&iomem_resource, &video_ram);
+}
+
+static void (*init_machine)(void) __initdata;
+
+static int __init customize_machine(void)
+{
+ /* customizes platform devices, or adds new ones */
+ if (init_machine)
+ init_machine();
+ return 0;
+}
+arch_initcall(customize_machine);
+
+void __init setup_arch(char **cmdline_p)
+{
+ char *from = default_command_line;
+
+ setup_processor();
+
+ init_mm.start_code = (unsigned long) _stext;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
+ init_mm.brk = (unsigned long) _end;
+
+ /* parse_early_param needs a boot_command_line */
+ strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
+
+ /* populate cmd_line too for later use, preserving boot_command_line */
+ strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
+ *cmdline_p = cmd_line;
+
+ parse_early_param();
+
+ uc32_memblock_init(&meminfo);
+
+ paging_init();
+ request_standard_resources(&meminfo);
+
+ cpu_init();
+
+ /*
+ * Set up various architecture-specific pointers
+ */
+ init_machine = puv3_core_init;
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+ conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+#endif
+ early_trap_init();
+}
+
+static struct cpu cpuinfo_unicore;
+
+static int __init topology_init(void)
+{
+ int i;
+
+ for_each_possible_cpu(i)
+ register_cpu(&cpuinfo_unicore, i);
+
+ return 0;
+}
+subsys_initcall(topology_init);
+
+#ifdef CONFIG_HAVE_PROC_CPU
+static int __init proc_cpu_init(void)
+{
+ struct proc_dir_entry *res;
+
+ res = proc_mkdir("cpu", NULL);
+ if (!res)
+ return -ENOMEM;
+ return 0;
+}
+fs_initcall(proc_cpu_init);
+#endif
+
+static int c_show(struct seq_file *m, void *v)
+{
+ seq_printf(m, "Processor\t: UniCore-II rev %d (%s)\n",
+ (int)(uc32_cpuid >> 16) & 15, elf_platform);
+
+ seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+ loops_per_jiffy / (500000/HZ),
+ (loops_per_jiffy / (5000/HZ)) % 100);
+
+ /* dump out the processor features */
+ seq_puts(m, "Features\t: CMOV UC-F64");
+
+ seq_printf(m, "\nCPU implementer\t: 0x%02x\n", uc32_cpuid >> 24);
+ seq_printf(m, "CPU architecture: 2\n");
+ seq_printf(m, "CPU revision\t: %d\n", (uc32_cpuid >> 16) & 15);
+
+ seq_printf(m, "Cache type\t: write-back\n"
+ "Cache clean\t: cp0 c5 ops\n"
+ "Cache lockdown\t: not support\n"
+ "Cache format\t: Harvard\n");
+
+ seq_puts(m, "\n");
+
+ seq_printf(m, "Hardware\t: PKUnity v3\n");
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos < 1 ? (void *)1 : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return NULL;
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = c_show
+};
diff --git a/arch/unicore32/kernel/setup.h b/arch/unicore32/kernel/setup.h
new file mode 100644
index 00000000000..dcd1306eb5c
--- /dev/null
+++ b/arch/unicore32/kernel/setup.h
@@ -0,0 +1,30 @@
+/*
+ * linux/arch/unicore32/kernel/setup.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_KERNEL_SETUP_H__
+#define __UNICORE_KERNEL_SETUP_H__
+
+extern void paging_init(void);
+extern void puv3_core_init(void);
+
+extern void puv3_ps2_init(void);
+extern void pci_puv3_preinit(void);
+extern void __init puv3_init_gpio(void);
+
+extern void setup_mm_for_reboot(char mode);
+
+extern char __stubs_start[], __stubs_end[];
+extern char __vectors_start[], __vectors_end[];
+
+extern void kernel_thread_helper(void);
+
+extern void __init early_signal_init(void);
+#endif
diff --git a/arch/unicore32/kernel/signal.c b/arch/unicore32/kernel/signal.c
new file mode 100644
index 00000000000..b163fca5678
--- /dev/null
+++ b/arch/unicore32/kernel/signal.c
@@ -0,0 +1,494 @@
+/*
+ * linux/arch/unicore32/kernel/signal.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <linux/freezer.h>
+#include <linux/uaccess.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/unistd.h>
+
+#include <asm/cacheflush.h>
+#include <asm/ucontext.h>
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/*
+ * For UniCore syscalls, we encode the syscall number into the instruction.
+ */
+#define SWI_SYS_SIGRETURN (0xff000000) /* error number for new abi */
+#define SWI_SYS_RT_SIGRETURN (0xff000000 | (__NR_rt_sigreturn))
+#define SWI_SYS_RESTART (0xff000000 | (__NR_restart_syscall))
+
+#define KERN_SIGRETURN_CODE (KUSER_VECPAGE_BASE + 0x00000500)
+#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
+
+const unsigned long sigreturn_codes[3] = {
+ SWI_SYS_SIGRETURN, SWI_SYS_RT_SIGRETURN,
+};
+
+const unsigned long syscall_restart_code[2] = {
+ SWI_SYS_RESTART, /* swi __NR_restart_syscall */
+ 0x69efc004, /* ldr pc, [sp], #4 */
+};
+
+/*
+ * Do a signal return; undo the signal stack. These are aligned to 64-bit.
+ */
+struct sigframe {
+ struct ucontext uc;
+ unsigned long retcode[2];
+};
+
+struct rt_sigframe {
+ struct siginfo info;
+ struct sigframe sig;
+};
+
+static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
+{
+ sigset_t set;
+ int err;
+
+ err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
+ if (err == 0) {
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+ }
+
+ err |= __get_user(regs->UCreg_00, &sf->uc.uc_mcontext.regs.UCreg_00);
+ err |= __get_user(regs->UCreg_01, &sf->uc.uc_mcontext.regs.UCreg_01);
+ err |= __get_user(regs->UCreg_02, &sf->uc.uc_mcontext.regs.UCreg_02);
+ err |= __get_user(regs->UCreg_03, &sf->uc.uc_mcontext.regs.UCreg_03);
+ err |= __get_user(regs->UCreg_04, &sf->uc.uc_mcontext.regs.UCreg_04);
+ err |= __get_user(regs->UCreg_05, &sf->uc.uc_mcontext.regs.UCreg_05);
+ err |= __get_user(regs->UCreg_06, &sf->uc.uc_mcontext.regs.UCreg_06);
+ err |= __get_user(regs->UCreg_07, &sf->uc.uc_mcontext.regs.UCreg_07);
+ err |= __get_user(regs->UCreg_08, &sf->uc.uc_mcontext.regs.UCreg_08);
+ err |= __get_user(regs->UCreg_09, &sf->uc.uc_mcontext.regs.UCreg_09);
+ err |= __get_user(regs->UCreg_10, &sf->uc.uc_mcontext.regs.UCreg_10);
+ err |= __get_user(regs->UCreg_11, &sf->uc.uc_mcontext.regs.UCreg_11);
+ err |= __get_user(regs->UCreg_12, &sf->uc.uc_mcontext.regs.UCreg_12);
+ err |= __get_user(regs->UCreg_13, &sf->uc.uc_mcontext.regs.UCreg_13);
+ err |= __get_user(regs->UCreg_14, &sf->uc.uc_mcontext.regs.UCreg_14);
+ err |= __get_user(regs->UCreg_15, &sf->uc.uc_mcontext.regs.UCreg_15);
+ err |= __get_user(regs->UCreg_16, &sf->uc.uc_mcontext.regs.UCreg_16);
+ err |= __get_user(regs->UCreg_17, &sf->uc.uc_mcontext.regs.UCreg_17);
+ err |= __get_user(regs->UCreg_18, &sf->uc.uc_mcontext.regs.UCreg_18);
+ err |= __get_user(regs->UCreg_19, &sf->uc.uc_mcontext.regs.UCreg_19);
+ err |= __get_user(regs->UCreg_20, &sf->uc.uc_mcontext.regs.UCreg_20);
+ err |= __get_user(regs->UCreg_21, &sf->uc.uc_mcontext.regs.UCreg_21);
+ err |= __get_user(regs->UCreg_22, &sf->uc.uc_mcontext.regs.UCreg_22);
+ err |= __get_user(regs->UCreg_23, &sf->uc.uc_mcontext.regs.UCreg_23);
+ err |= __get_user(regs->UCreg_24, &sf->uc.uc_mcontext.regs.UCreg_24);
+ err |= __get_user(regs->UCreg_25, &sf->uc.uc_mcontext.regs.UCreg_25);
+ err |= __get_user(regs->UCreg_26, &sf->uc.uc_mcontext.regs.UCreg_26);
+ err |= __get_user(regs->UCreg_fp, &sf->uc.uc_mcontext.regs.UCreg_fp);
+ err |= __get_user(regs->UCreg_ip, &sf->uc.uc_mcontext.regs.UCreg_ip);
+ err |= __get_user(regs->UCreg_sp, &sf->uc.uc_mcontext.regs.UCreg_sp);
+ err |= __get_user(regs->UCreg_lr, &sf->uc.uc_mcontext.regs.UCreg_lr);
+ err |= __get_user(regs->UCreg_pc, &sf->uc.uc_mcontext.regs.UCreg_pc);
+ err |= __get_user(regs->UCreg_asr, &sf->uc.uc_mcontext.regs.UCreg_asr);
+
+ err |= !valid_user_regs(regs);
+
+ return err;
+}
+
+asmlinkage int __sys_rt_sigreturn(struct pt_regs *regs)
+{
+ struct rt_sigframe __user *frame;
+
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+ /*
+ * Since we stacked the signal on a 64-bit boundary,
+ * then 'sp' should be word aligned here. If it's
+ * not, then the user is trying to mess with us.
+ */
+ if (regs->UCreg_sp & 7)
+ goto badframe;
+
+ frame = (struct rt_sigframe __user *)regs->UCreg_sp;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+
+ if (restore_sigframe(regs, &frame->sig))
+ goto badframe;
+
+ if (do_sigaltstack(&frame->sig.uc.uc_stack, NULL, regs->UCreg_sp)
+ == -EFAULT)
+ goto badframe;
+
+ return regs->UCreg_00;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+static int setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs,
+ sigset_t *set)
+{
+ int err = 0;
+
+ err |= __put_user(regs->UCreg_00, &sf->uc.uc_mcontext.regs.UCreg_00);
+ err |= __put_user(regs->UCreg_01, &sf->uc.uc_mcontext.regs.UCreg_01);
+ err |= __put_user(regs->UCreg_02, &sf->uc.uc_mcontext.regs.UCreg_02);
+ err |= __put_user(regs->UCreg_03, &sf->uc.uc_mcontext.regs.UCreg_03);
+ err |= __put_user(regs->UCreg_04, &sf->uc.uc_mcontext.regs.UCreg_04);
+ err |= __put_user(regs->UCreg_05, &sf->uc.uc_mcontext.regs.UCreg_05);
+ err |= __put_user(regs->UCreg_06, &sf->uc.uc_mcontext.regs.UCreg_06);
+ err |= __put_user(regs->UCreg_07, &sf->uc.uc_mcontext.regs.UCreg_07);
+ err |= __put_user(regs->UCreg_08, &sf->uc.uc_mcontext.regs.UCreg_08);
+ err |= __put_user(regs->UCreg_09, &sf->uc.uc_mcontext.regs.UCreg_09);
+ err |= __put_user(regs->UCreg_10, &sf->uc.uc_mcontext.regs.UCreg_10);
+ err |= __put_user(regs->UCreg_11, &sf->uc.uc_mcontext.regs.UCreg_11);
+ err |= __put_user(regs->UCreg_12, &sf->uc.uc_mcontext.regs.UCreg_12);
+ err |= __put_user(regs->UCreg_13, &sf->uc.uc_mcontext.regs.UCreg_13);
+ err |= __put_user(regs->UCreg_14, &sf->uc.uc_mcontext.regs.UCreg_14);
+ err |= __put_user(regs->UCreg_15, &sf->uc.uc_mcontext.regs.UCreg_15);
+ err |= __put_user(regs->UCreg_16, &sf->uc.uc_mcontext.regs.UCreg_16);
+ err |= __put_user(regs->UCreg_17, &sf->uc.uc_mcontext.regs.UCreg_17);
+ err |= __put_user(regs->UCreg_18, &sf->uc.uc_mcontext.regs.UCreg_18);
+ err |= __put_user(regs->UCreg_19, &sf->uc.uc_mcontext.regs.UCreg_19);
+ err |= __put_user(regs->UCreg_20, &sf->uc.uc_mcontext.regs.UCreg_20);
+ err |= __put_user(regs->UCreg_21, &sf->uc.uc_mcontext.regs.UCreg_21);
+ err |= __put_user(regs->UCreg_22, &sf->uc.uc_mcontext.regs.UCreg_22);
+ err |= __put_user(regs->UCreg_23, &sf->uc.uc_mcontext.regs.UCreg_23);
+ err |= __put_user(regs->UCreg_24, &sf->uc.uc_mcontext.regs.UCreg_24);
+ err |= __put_user(regs->UCreg_25, &sf->uc.uc_mcontext.regs.UCreg_25);
+ err |= __put_user(regs->UCreg_26, &sf->uc.uc_mcontext.regs.UCreg_26);
+ err |= __put_user(regs->UCreg_fp, &sf->uc.uc_mcontext.regs.UCreg_fp);
+ err |= __put_user(regs->UCreg_ip, &sf->uc.uc_mcontext.regs.UCreg_ip);
+ err |= __put_user(regs->UCreg_sp, &sf->uc.uc_mcontext.regs.UCreg_sp);
+ err |= __put_user(regs->UCreg_lr, &sf->uc.uc_mcontext.regs.UCreg_lr);
+ err |= __put_user(regs->UCreg_pc, &sf->uc.uc_mcontext.regs.UCreg_pc);
+ err |= __put_user(regs->UCreg_asr, &sf->uc.uc_mcontext.regs.UCreg_asr);
+
+ err |= __put_user(current->thread.trap_no,
+ &sf->uc.uc_mcontext.trap_no);
+ err |= __put_user(current->thread.error_code,
+ &sf->uc.uc_mcontext.error_code);
+ err |= __put_user(current->thread.address,
+ &sf->uc.uc_mcontext.fault_address);
+ err |= __put_user(set->sig[0], &sf->uc.uc_mcontext.oldmask);
+
+ err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set));
+
+ return err;
+}
+
+static inline void __user *get_sigframe(struct k_sigaction *ka,
+ struct pt_regs *regs, int framesize)
+{
+ unsigned long sp = regs->UCreg_sp;
+ void __user *frame;
+
+ /*
+ * This is the X/Open sanctioned signal stack switching.
+ */
+ if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp))
+ sp = current->sas_ss_sp + current->sas_ss_size;
+
+ /*
+ * ATPCS B01 mandates 8-byte alignment
+ */
+ frame = (void __user *)((sp - framesize) & ~7);
+
+ /*
+ * Check that we can actually write to the signal frame.
+ */
+ if (!access_ok(VERIFY_WRITE, frame, framesize))
+ frame = NULL;
+
+ return frame;
+}
+
+static int setup_return(struct pt_regs *regs, struct k_sigaction *ka,
+ unsigned long __user *rc, void __user *frame, int usig)
+{
+ unsigned long handler = (unsigned long)ka->sa.sa_handler;
+ unsigned long retcode;
+ unsigned long asr = regs->UCreg_asr & ~PSR_f;
+
+ unsigned int idx = 0;
+
+ if (ka->sa.sa_flags & SA_SIGINFO)
+ idx += 1;
+
+ if (__put_user(sigreturn_codes[idx], rc) ||
+ __put_user(sigreturn_codes[idx+1], rc+1))
+ return 1;
+
+ retcode = KERN_SIGRETURN_CODE + (idx << 2);
+
+ regs->UCreg_00 = usig;
+ regs->UCreg_sp = (unsigned long)frame;
+ regs->UCreg_lr = retcode;
+ regs->UCreg_pc = handler;
+ regs->UCreg_asr = asr;
+
+ return 0;
+}
+
+static int setup_frame(int usig, struct k_sigaction *ka,
+ sigset_t *set, struct pt_regs *regs)
+{
+ struct sigframe __user *frame = get_sigframe(ka, regs, sizeof(*frame));
+ int err = 0;
+
+ if (!frame)
+ return 1;
+
+ /*
+ * Set uc.uc_flags to a value which sc.trap_no would never have.
+ */
+ err |= __put_user(0x5ac3c35a, &frame->uc.uc_flags);
+
+ err |= setup_sigframe(frame, regs, set);
+ if (err == 0)
+ err |= setup_return(regs, ka, frame->retcode, frame, usig);
+
+ return err;
+}
+
+static int setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
+{
+ struct rt_sigframe __user *frame =
+ get_sigframe(ka, regs, sizeof(*frame));
+ stack_t stack;
+ int err = 0;
+
+ if (!frame)
+ return 1;
+
+ err |= copy_siginfo_to_user(&frame->info, info);
+
+ err |= __put_user(0, &frame->sig.uc.uc_flags);
+ err |= __put_user(NULL, &frame->sig.uc.uc_link);
+
+ memset(&stack, 0, sizeof(stack));
+ stack.ss_sp = (void __user *)current->sas_ss_sp;
+ stack.ss_flags = sas_ss_flags(regs->UCreg_sp);
+ stack.ss_size = current->sas_ss_size;
+ err |= __copy_to_user(&frame->sig.uc.uc_stack, &stack, sizeof(stack));
+
+ err |= setup_sigframe(&frame->sig, regs, set);
+ if (err == 0)
+ err |= setup_return(regs, ka, frame->sig.retcode, frame, usig);
+
+ if (err == 0) {
+ /*
+ * For realtime signals we must also set the second and third
+ * arguments for the signal handler.
+ */
+ regs->UCreg_01 = (unsigned long)&frame->info;
+ regs->UCreg_02 = (unsigned long)&frame->sig.uc;
+ }
+
+ return err;
+}
+
+static inline void setup_syscall_restart(struct pt_regs *regs)
+{
+ regs->UCreg_00 = regs->UCreg_ORIG_00;
+ regs->UCreg_pc -= 4;
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static int handle_signal(unsigned long sig, struct k_sigaction *ka,
+ siginfo_t *info, sigset_t *oldset,
+ struct pt_regs *regs, int syscall)
+{
+ struct thread_info *thread = current_thread_info();
+ struct task_struct *tsk = current;
+ int usig = sig;
+ int ret;
+
+ /*
+ * If we were from a system call, check for system call restarting...
+ */
+ if (syscall) {
+ switch (regs->UCreg_00) {
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ regs->UCreg_00 = -EINTR;
+ break;
+ case -ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->UCreg_00 = -EINTR;
+ break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ setup_syscall_restart(regs);
+ }
+ }
+
+ /*
+ * translate the signal
+ */
+ if (usig < 32 && thread->exec_domain
+ && thread->exec_domain->signal_invmap)
+ usig = thread->exec_domain->signal_invmap[usig];
+
+ /*
+ * Set up the stack frame
+ */
+ if (ka->sa.sa_flags & SA_SIGINFO)
+ ret = setup_rt_frame(usig, ka, info, oldset, regs);
+ else
+ ret = setup_frame(usig, ka, oldset, regs);
+
+ /*
+ * Check that the resulting registers are actually sane.
+ */
+ ret |= !valid_user_regs(regs);
+
+ if (ret != 0) {
+ force_sigsegv(sig, tsk);
+ return ret;
+ }
+
+ /*
+ * Block the signal if we were successful.
+ */
+ spin_lock_irq(&tsk->sighand->siglock);
+ sigorsets(&tsk->blocked, &tsk->blocked,
+ &ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(&tsk->blocked, sig);
+ recalc_sigpending();
+ spin_unlock_irq(&tsk->sighand->siglock);
+
+ return 0;
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+static void do_signal(struct pt_regs *regs, int syscall)
+{
+ struct k_sigaction ka;
+ siginfo_t info;
+ int signr;
+
+ /*
+ * We want the common case to go fast, which
+ * is why we may in certain cases get here from
+ * kernel mode. Just return without doing anything
+ * if so.
+ */
+ if (!user_mode(regs))
+ return;
+
+ if (try_to_freeze())
+ goto no_signal;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+ if (signr > 0) {
+ sigset_t *oldset;
+
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = &current->saved_sigmask;
+ else
+ oldset = &current->blocked;
+ if (handle_signal(signr, &ka, &info, oldset, regs, syscall)
+ == 0) {
+ /*
+ * A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
+ return;
+ }
+
+ no_signal:
+ /*
+ * No signal to deliver to the process - restart the syscall.
+ */
+ if (syscall) {
+ if (regs->UCreg_00 == -ERESTART_RESTARTBLOCK) {
+ u32 __user *usp;
+
+ regs->UCreg_sp -= 4;
+ usp = (u32 __user *)regs->UCreg_sp;
+
+ if (put_user(regs->UCreg_pc, usp) == 0) {
+ regs->UCreg_pc = KERN_RESTART_CODE;
+ } else {
+ regs->UCreg_sp += 4;
+ force_sigsegv(0, current);
+ }
+ }
+ if (regs->UCreg_00 == -ERESTARTNOHAND ||
+ regs->UCreg_00 == -ERESTARTSYS ||
+ regs->UCreg_00 == -ERESTARTNOINTR) {
+ setup_syscall_restart(regs);
+ }
+
+ /* If there's no signal to deliver, we just put the saved
+ * sigmask back.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+ }
+ }
+}
+
+asmlinkage void do_notify_resume(struct pt_regs *regs,
+ unsigned int thread_flags, int syscall)
+{
+ if (thread_flags & _TIF_SIGPENDING)
+ do_signal(regs, syscall);
+
+ if (thread_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
+}
+
+/*
+ * Copy signal return handlers into the vector page, and
+ * set sigreturn to be a pointer to these.
+ */
+void __init early_signal_init(void)
+{
+ memcpy((void *)kuser_vecpage_to_vectors(KERN_SIGRETURN_CODE),
+ sigreturn_codes, sizeof(sigreturn_codes));
+ memcpy((void *)kuser_vecpage_to_vectors(KERN_RESTART_CODE),
+ syscall_restart_code, sizeof(syscall_restart_code));
+ /* Need not to flush icache, since early_trap_init will do it last. */
+}
diff --git a/arch/unicore32/kernel/sleep.S b/arch/unicore32/kernel/sleep.S
new file mode 100644
index 00000000000..607a104aec5
--- /dev/null
+++ b/arch/unicore32/kernel/sleep.S
@@ -0,0 +1,202 @@
+/*
+ * linux/arch/unicore32/kernel/sleep.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+
+ .text
+
+pkunity_cpu_save_cp:
+
+ @ get coprocessor registers
+
+ movc r3, p0.c7, #0 @ PID
+ movc r4, p0.c2, #0 @ translation table base addr
+ movc r5, p0.c1, #0 @ control reg
+
+
+ @ store them plus current virtual stack ptr on stack
+ mov r6, sp
+ stm.w (r3 - r6), [sp-]
+
+ mov pc, lr
+
+pkunity_cpu_save_sp:
+ @ preserve phys address of stack
+ mov r0, sp
+ stw.w lr, [sp+], #-4
+ b.l sleep_phys_sp
+ ldw r1, =sleep_save_sp
+ stw r0, [r1]
+ ldw.w pc, [sp]+, #4
+
+/*
+ * puv3_cpu_suspend()
+ *
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
+ */
+
+ENTRY(puv3_cpu_suspend)
+ stm.w (r16 - r27, lr), [sp-] @ save registers on stack
+ stm.w (r4 - r15), [sp-] @ save registers on stack
+
+#ifdef CONFIG_UNICORE_FPU_F64
+ sfm.w (f0 - f7 ), [sp-]
+ sfm.w (f8 - f15), [sp-]
+ sfm.w (f16 - f23), [sp-]
+ sfm.w (f24 - f31), [sp-]
+ cff r4, s31
+ stm.w (r4), [sp-]
+#endif
+ b.l pkunity_cpu_save_cp
+
+ b.l pkunity_cpu_save_sp
+
+ @ clean data cache
+ mov r1, #0
+ movc p0.c5, r1, #14
+ nop
+ nop
+ nop
+ nop
+
+
+
+ @ DDR2 BaseAddr
+ ldw r0, =(PKUNITY_DDR2CTRL_BASE)
+
+ @ PM BaseAddr
+ ldw r1, =(PKUNITY_PM_BASE)
+
+ @ set PLL_SYS_CFG reg, 275
+ movl r6, #0x00002401
+ stw r6, [r1+], #0x18
+ @ set PLL_DDR_CFG reg, 66MHz
+ movl r6, #0x00100c00
+ stw r6, [r1+], #0x1c
+
+ @ set wake up source
+ movl r8, #0x800001ff @ epip4d
+ stw r8, [r1+], #0xc
+
+ @ set PGSR
+ movl r5, #0x40000
+ stw r5, [r1+], #0x10
+
+ @ prepare DDR2 refresh settings
+ ldw r5, [r0+], #0x24
+ or r5, r5, #0x00000001
+
+ @ prepare PMCR for PLL changing
+ movl r6, #0xc
+
+ @ prepare for closing PLL
+ movl r7, #0x1
+
+ @ prepare sleep mode
+ mov r8, #0x1
+
+@ movl r0, 0x11111111
+@ put_word_ocd r0
+ b pkunity_cpu_do_suspend
+
+ .ltorg
+ .align 5
+pkunity_cpu_do_suspend:
+ b 101f
+ @ put DDR2 into self-refresh
+100: stw r5, [r0+], #0x24
+ @ change PLL
+ stw r6, [r1]
+ b 1f
+
+ .ltorg
+ .align 5
+101: b 102f
+ @ wait for PLL changing complete
+1: ldw r6, [r1+], #0x44
+ csub.a r6, #0x1
+ bne 1b
+ b 2f
+
+ .ltorg
+ .align 5
+102: b 100b
+ @ close PLL
+2: stw r7, [r1+], #0x4
+ @ enter sleep mode
+ stw r8, [r1]
+3: b 3b
+
+
+
+
+/*
+ * puv3_cpu_resume()
+ *
+ * entry point from bootloader into kernel during resume
+ *
+ * Note: Yes, part of the following code is located into the .data section.
+ * This is to allow sleep_save_sp to be accessed with a relative load
+ * while we can't rely on any MMU translation. We could have put
+ * sleep_save_sp in the .text section as well, but some setups might
+ * insist on it to be truly read-only.
+ */
+
+ .data
+ .align 5
+ENTRY(puv3_cpu_resume)
+@ movl r0, 0x20202020
+@ put_word_ocd r0
+
+ ldw r0, sleep_save_sp @ stack phys addr
+ ldw r2, =resume_after_mmu @ its absolute virtual address
+ ldm (r3 - r6), [r0]+ @ CP regs + virt stack ptr
+ mov sp, r6 @ CP regs + virt stack ptr
+
+ mov r1, #0
+ movc p0.c6, r1, #6 @ invalidate I & D TLBs
+ movc p0.c5, r1, #28 @ invalidate I & D caches, BTB
+
+ movc p0.c7, r3, #0 @ PID
+ movc p0.c2, r4, #0 @ translation table base addr
+ movc p0.c1, r5, #0 @ control reg, turn on mmu
+ nop
+ jump r2
+ nop
+ nop
+ nop
+ nop
+ nop
+
+sleep_save_sp:
+ .word 0 @ preserve stack phys ptr here
+
+ .text
+resume_after_mmu:
+@ movl r0, 0x30303030
+@ put_word_ocd r0
+
+#ifdef CONFIG_UNICORE_FPU_F64
+ lfm.w (f0 - f7 ), [sp]+
+ lfm.w (f8 - f15), [sp]+
+ lfm.w (f16 - f23), [sp]+
+ lfm.w (f24 - f31), [sp]+
+ ldm.w (r4), [sp]+
+ ctf r4, s31
+#endif
+ ldm.w (r4 - r15), [sp]+ @ restore registers from stack
+ ldm.w (r16 - r27, pc), [sp]+ @ return to caller
diff --git a/arch/unicore32/kernel/stacktrace.c b/arch/unicore32/kernel/stacktrace.c
new file mode 100644
index 00000000000..b34030bdabe
--- /dev/null
+++ b/arch/unicore32/kernel/stacktrace.c
@@ -0,0 +1,131 @@
+/*
+ * linux/arch/unicore32/kernel/stacktrace.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+
+#include <asm/stacktrace.h>
+
+#if defined(CONFIG_FRAME_POINTER)
+/*
+ * Unwind the current stack frame and store the new register values in the
+ * structure passed as argument. Unwinding is equivalent to a function return,
+ * hence the new PC value rather than LR should be used for backtrace.
+ *
+ * With framepointer enabled, a simple function prologue looks like this:
+ * mov ip, sp
+ * stmdb sp!, {fp, ip, lr, pc}
+ * sub fp, ip, #4
+ *
+ * A simple function epilogue looks like this:
+ * ldm sp, {fp, sp, pc}
+ *
+ * Note that with framepointer enabled, even the leaf functions have the same
+ * prologue and epilogue, therefore we can ignore the LR value in this case.
+ */
+int notrace unwind_frame(struct stackframe *frame)
+{
+ unsigned long high, low;
+ unsigned long fp = frame->fp;
+
+ /* only go to a higher address on the stack */
+ low = frame->sp;
+ high = ALIGN(low, THREAD_SIZE);
+
+ /* check current frame pointer is within bounds */
+ if (fp < (low + 12) || fp + 4 >= high)
+ return -EINVAL;
+
+ /* restore the registers from the stack frame */
+ frame->fp = *(unsigned long *)(fp - 12);
+ frame->sp = *(unsigned long *)(fp - 8);
+ frame->pc = *(unsigned long *)(fp - 4);
+
+ return 0;
+}
+#endif
+
+void notrace walk_stackframe(struct stackframe *frame,
+ int (*fn)(struct stackframe *, void *), void *data)
+{
+ while (1) {
+ int ret;
+
+ if (fn(frame, data))
+ break;
+ ret = unwind_frame(frame);
+ if (ret < 0)
+ break;
+ }
+}
+EXPORT_SYMBOL(walk_stackframe);
+
+#ifdef CONFIG_STACKTRACE
+struct stack_trace_data {
+ struct stack_trace *trace;
+ unsigned int no_sched_functions;
+ unsigned int skip;
+};
+
+static int save_trace(struct stackframe *frame, void *d)
+{
+ struct stack_trace_data *data = d;
+ struct stack_trace *trace = data->trace;
+ unsigned long addr = frame->pc;
+
+ if (data->no_sched_functions && in_sched_functions(addr))
+ return 0;
+ if (data->skip) {
+ data->skip--;
+ return 0;
+ }
+
+ trace->entries[trace->nr_entries++] = addr;
+
+ return trace->nr_entries >= trace->max_entries;
+}
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+ struct stack_trace_data data;
+ struct stackframe frame;
+
+ data.trace = trace;
+ data.skip = trace->skip;
+
+ if (tsk != current) {
+ data.no_sched_functions = 1;
+ frame.fp = thread_saved_fp(tsk);
+ frame.sp = thread_saved_sp(tsk);
+ frame.lr = 0; /* recovered from the stack */
+ frame.pc = thread_saved_pc(tsk);
+ } else {
+ register unsigned long current_sp asm("sp");
+
+ data.no_sched_functions = 0;
+ frame.fp = (unsigned long)__builtin_frame_address(0);
+ frame.sp = current_sp;
+ frame.lr = (unsigned long)__builtin_return_address(0);
+ frame.pc = (unsigned long)save_stack_trace_tsk;
+ }
+
+ walk_stackframe(&frame, save_trace, &data);
+ if (trace->nr_entries < trace->max_entries)
+ trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
+
+void save_stack_trace(struct stack_trace *trace)
+{
+ save_stack_trace_tsk(current, trace);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
+#endif
diff --git a/arch/unicore32/kernel/sys.c b/arch/unicore32/kernel/sys.c
new file mode 100644
index 00000000000..3afe60a39ac
--- /dev/null
+++ b/arch/unicore32/kernel/sys.c
@@ -0,0 +1,126 @@
+/*
+ * linux/arch/unicore32/kernel/sys.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/ipc.h>
+#include <linux/uaccess.h>
+
+#include <asm/syscalls.h>
+#include <asm/cacheflush.h>
+
+/* Clone a task - this clones the calling program thread.
+ * This is called indirectly via a small wrapper
+ */
+asmlinkage long __sys_clone(unsigned long clone_flags, unsigned long newsp,
+ void __user *parent_tid, void __user *child_tid,
+ struct pt_regs *regs)
+{
+ if (!newsp)
+ newsp = regs->UCreg_sp;
+
+ return do_fork(clone_flags, newsp, regs, 0,
+ parent_tid, child_tid);
+}
+
+/* sys_execve() executes a new program.
+ * This is called indirectly via a small wrapper
+ */
+asmlinkage long __sys_execve(const char __user *filename,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp,
+ struct pt_regs *regs)
+{
+ int error;
+ char *fn;
+
+ fn = getname(filename);
+ error = PTR_ERR(fn);
+ if (IS_ERR(fn))
+ goto out;
+ error = do_execve(fn, argv, envp, regs);
+ putname(fn);
+out:
+ return error;
+}
+
+int kernel_execve(const char *filename,
+ const char *const argv[],
+ const char *const envp[])
+{
+ struct pt_regs regs;
+ int ret;
+
+ memset(&regs, 0, sizeof(struct pt_regs));
+ ret = do_execve(filename,
+ (const char __user *const __user *)argv,
+ (const char __user *const __user *)envp, &regs);
+ if (ret < 0)
+ goto out;
+
+ /*
+ * Save argc to the register structure for userspace.
+ */
+ regs.UCreg_00 = ret;
+
+ /*
+ * We were successful. We won't be returning to our caller, but
+ * instead to user space by manipulating the kernel stack.
+ */
+ asm("add r0, %0, %1\n\t"
+ "mov r1, %2\n\t"
+ "mov r2, %3\n\t"
+ "mov r22, #0\n\t" /* not a syscall */
+ "mov r23, %0\n\t" /* thread structure */
+ "b.l memmove\n\t" /* copy regs to top of stack */
+ "mov sp, r0\n\t" /* reposition stack pointer */
+ "b ret_to_user"
+ :
+ : "r" (current_thread_info()),
+ "Ir" (THREAD_START_SP - sizeof(regs)),
+ "r" (&regs),
+ "Ir" (sizeof(regs))
+ : "r0", "r1", "r2", "r3", "ip", "lr", "memory");
+
+ out:
+ return ret;
+}
+EXPORT_SYMBOL(kernel_execve);
+
+/* Note: used by the compat code even in 64-bit Linux. */
+SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags,
+ unsigned long, fd, unsigned long, off_4k)
+{
+ return sys_mmap_pgoff(addr, len, prot, flags, fd,
+ off_4k);
+}
+
+/* Provide the actual syscall number to call mapping. */
+#undef __SYSCALL
+#define __SYSCALL(nr, call) [nr] = (call),
+
+/* Note that we don't include <linux/unistd.h> but <asm/unistd.h> */
+void *sys_call_table[__NR_syscalls] = {
+ [0 ... __NR_syscalls-1] = sys_ni_syscall,
+#include <asm/unistd.h>
+};
diff --git a/arch/unicore32/kernel/time.c b/arch/unicore32/kernel/time.c
new file mode 100644
index 00000000000..080710c0924
--- /dev/null
+++ b/arch/unicore32/kernel/time.c
@@ -0,0 +1,143 @@
+/*
+ * linux/arch/unicore32/kernel/time.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/timex.h>
+#include <linux/clockchips.h>
+
+#include <mach/hardware.h>
+
+#define MIN_OSCR_DELTA 2
+
+static irqreturn_t puv3_ost0_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *c = dev_id;
+
+ /* Disarm the compare/match, signal the event. */
+ writel(readl(OST_OIER) & ~OST_OIER_E0, OST_OIER);
+ writel(readl(OST_OSSR) & ~OST_OSSR_M0, OST_OSSR);
+ c->event_handler(c);
+
+ return IRQ_HANDLED;
+}
+
+static int
+puv3_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
+{
+ unsigned long next, oscr;
+
+ writel(readl(OST_OIER) | OST_OIER_E0, OST_OIER);
+ next = readl(OST_OSCR) + delta;
+ writel(next, OST_OSMR0);
+ oscr = readl(OST_OSCR);
+
+ return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
+}
+
+static void
+puv3_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ writel(readl(OST_OIER) & ~OST_OIER_E0, OST_OIER);
+ writel(readl(OST_OSSR) & ~OST_OSSR_M0, OST_OSSR);
+ break;
+
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ }
+}
+
+static struct clock_event_device ckevt_puv3_osmr0 = {
+ .name = "osmr0",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = puv3_osmr0_set_next_event,
+ .set_mode = puv3_osmr0_set_mode,
+};
+
+static cycle_t puv3_read_oscr(struct clocksource *cs)
+{
+ return readl(OST_OSCR);
+}
+
+static struct clocksource cksrc_puv3_oscr = {
+ .name = "oscr",
+ .rating = 200,
+ .read = puv3_read_oscr,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct irqaction puv3_timer_irq = {
+ .name = "ost0",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = puv3_ost0_interrupt,
+ .dev_id = &ckevt_puv3_osmr0,
+};
+
+void __init time_init(void)
+{
+ writel(0, OST_OIER); /* disable any timer interrupts */
+ writel(0, OST_OSSR); /* clear status on all timers */
+
+ clockevents_calc_mult_shift(&ckevt_puv3_osmr0, CLOCK_TICK_RATE, 5);
+
+ ckevt_puv3_osmr0.max_delta_ns =
+ clockevent_delta2ns(0x7fffffff, &ckevt_puv3_osmr0);
+ ckevt_puv3_osmr0.min_delta_ns =
+ clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_puv3_osmr0) + 1;
+ ckevt_puv3_osmr0.cpumask = cpumask_of(0);
+
+ setup_irq(IRQ_TIMER0, &puv3_timer_irq);
+
+ clocksource_register_hz(&cksrc_puv3_oscr, CLOCK_TICK_RATE);
+ clockevents_register_device(&ckevt_puv3_osmr0);
+}
+
+#ifdef CONFIG_PM
+unsigned long osmr[4], oier;
+
+void puv3_timer_suspend(void)
+{
+ osmr[0] = readl(OST_OSMR0);
+ osmr[1] = readl(OST_OSMR1);
+ osmr[2] = readl(OST_OSMR2);
+ osmr[3] = readl(OST_OSMR3);
+ oier = readl(OST_OIER);
+}
+
+void puv3_timer_resume(void)
+{
+ writel(0, OST_OSSR);
+ writel(osmr[0], OST_OSMR0);
+ writel(osmr[1], OST_OSMR1);
+ writel(osmr[2], OST_OSMR2);
+ writel(osmr[3], OST_OSMR3);
+ writel(oier, OST_OIER);
+
+ /*
+ * OSMR0 is the system timer: make sure OSCR is sufficiently behind
+ */
+ writel(readl(OST_OSMR0) - LATCH, OST_OSCR);
+}
+#else
+void puv3_timer_suspend(void) { };
+void puv3_timer_resume(void) { };
+#endif
+
diff --git a/arch/unicore32/kernel/traps.c b/arch/unicore32/kernel/traps.c
new file mode 100644
index 00000000000..25abbb10172
--- /dev/null
+++ b/arch/unicore32/kernel/traps.c
@@ -0,0 +1,333 @@
+/*
+ * linux/arch/unicore32/kernel/traps.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * 'traps.c' handles hardware exceptions after we have saved some state.
+ * Mostly a debugging aid, but will probably kill the offending process.
+ */
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/spinlock.h>
+#include <linux/personality.h>
+#include <linux/kallsyms.h>
+#include <linux/kdebug.h>
+#include <linux/uaccess.h>
+#include <linux/delay.h>
+#include <linux/hardirq.h>
+#include <linux/init.h>
+#include <linux/uaccess.h>
+#include <linux/atomic.h>
+#include <linux/unistd.h>
+
+#include <asm/cacheflush.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+
+#include "setup.h"
+
+static void dump_mem(const char *, const char *, unsigned long, unsigned long);
+
+void dump_backtrace_entry(unsigned long where,
+ unsigned long from, unsigned long frame)
+{
+#ifdef CONFIG_KALLSYMS
+ printk(KERN_DEFAULT "[<%08lx>] (%pS) from [<%08lx>] (%pS)\n",
+ where, (void *)where, from, (void *)from);
+#else
+ printk(KERN_DEFAULT "Function entered at [<%08lx>] from [<%08lx>]\n",
+ where, from);
+#endif
+}
+
+/*
+ * Stack pointers should always be within the kernels view of
+ * physical memory. If it is not there, then we can't dump
+ * out any information relating to the stack.
+ */
+static int verify_stack(unsigned long sp)
+{
+ if (sp < PAGE_OFFSET ||
+ (sp > (unsigned long)high_memory && high_memory != NULL))
+ return -EFAULT;
+
+ return 0;
+}
+
+/*
+ * Dump out the contents of some memory nicely...
+ */
+static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+ unsigned long top)
+{
+ unsigned long first;
+ mm_segment_t fs;
+ int i;
+
+ /*
+ * We need to switch to kernel mode so that we can use __get_user
+ * to safely read from kernel space. Note that we now dump the
+ * code first, just in case the backtrace kills us.
+ */
+ fs = get_fs();
+ set_fs(KERNEL_DS);
+
+ printk(KERN_DEFAULT "%s%s(0x%08lx to 0x%08lx)\n",
+ lvl, str, bottom, top);
+
+ for (first = bottom & ~31; first < top; first += 32) {
+ unsigned long p;
+ char str[sizeof(" 12345678") * 8 + 1];
+
+ memset(str, ' ', sizeof(str));
+ str[sizeof(str) - 1] = '\0';
+
+ for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
+ if (p >= bottom && p < top) {
+ unsigned long val;
+ if (__get_user(val, (unsigned long *)p) == 0)
+ sprintf(str + i * 9, " %08lx", val);
+ else
+ sprintf(str + i * 9, " ????????");
+ }
+ }
+ printk(KERN_DEFAULT "%s%04lx:%s\n", lvl, first & 0xffff, str);
+ }
+
+ set_fs(fs);
+}
+
+static void dump_instr(const char *lvl, struct pt_regs *regs)
+{
+ unsigned long addr = instruction_pointer(regs);
+ const int width = 8;
+ mm_segment_t fs;
+ char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
+ int i;
+
+ /*
+ * We need to switch to kernel mode so that we can use __get_user
+ * to safely read from kernel space. Note that we now dump the
+ * code first, just in case the backtrace kills us.
+ */
+ fs = get_fs();
+ set_fs(KERNEL_DS);
+
+ for (i = -4; i < 1; i++) {
+ unsigned int val, bad;
+
+ bad = __get_user(val, &((u32 *)addr)[i]);
+
+ if (!bad)
+ p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
+ width, val);
+ else {
+ p += sprintf(p, "bad PC value");
+ break;
+ }
+ }
+ printk(KERN_DEFAULT "%sCode: %s\n", lvl, str);
+
+ set_fs(fs);
+}
+
+static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+{
+ unsigned int fp, mode;
+ int ok = 1;
+
+ printk(KERN_DEFAULT "Backtrace: ");
+
+ if (!tsk)
+ tsk = current;
+
+ if (regs) {
+ fp = regs->UCreg_fp;
+ mode = processor_mode(regs);
+ } else if (tsk != current) {
+ fp = thread_saved_fp(tsk);
+ mode = 0x10;
+ } else {
+ asm("mov %0, fp" : "=r" (fp) : : "cc");
+ mode = 0x10;
+ }
+
+ if (!fp) {
+ printk("no frame pointer");
+ ok = 0;
+ } else if (verify_stack(fp)) {
+ printk("invalid frame pointer 0x%08x", fp);
+ ok = 0;
+ } else if (fp < (unsigned long)end_of_stack(tsk))
+ printk("frame pointer underflow");
+ printk("\n");
+
+ if (ok)
+ c_backtrace(fp, mode);
+}
+
+void dump_stack(void)
+{
+ dump_backtrace(NULL, NULL);
+}
+EXPORT_SYMBOL(dump_stack);
+
+void show_stack(struct task_struct *tsk, unsigned long *sp)
+{
+ dump_backtrace(NULL, tsk);
+ barrier();
+}
+
+static int __die(const char *str, int err, struct thread_info *thread,
+ struct pt_regs *regs)
+{
+ struct task_struct *tsk = thread->task;
+ static int die_counter;
+ int ret;
+
+ printk(KERN_EMERG "Internal error: %s: %x [#%d]\n",
+ str, err, ++die_counter);
+ sysfs_printk_last_file();
+
+ /* trap and error numbers are mostly meaningless on UniCore */
+ ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, \
+ SIGSEGV);
+ if (ret == NOTIFY_STOP)
+ return ret;
+
+ print_modules();
+ __show_regs(regs);
+ printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
+ TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
+
+ if (!user_mode(regs) || in_interrupt()) {
+ dump_mem(KERN_EMERG, "Stack: ", regs->UCreg_sp,
+ THREAD_SIZE + (unsigned long)task_stack_page(tsk));
+ dump_backtrace(regs, tsk);
+ dump_instr(KERN_EMERG, regs);
+ }
+
+ return ret;
+}
+
+DEFINE_SPINLOCK(die_lock);
+
+/*
+ * This function is protected against re-entrancy.
+ */
+void die(const char *str, struct pt_regs *regs, int err)
+{
+ struct thread_info *thread = current_thread_info();
+ int ret;
+
+ oops_enter();
+
+ spin_lock_irq(&die_lock);
+ console_verbose();
+ bust_spinlocks(1);
+ ret = __die(str, err, thread, regs);
+
+ bust_spinlocks(0);
+ add_taint(TAINT_DIE);
+ spin_unlock_irq(&die_lock);
+ oops_exit();
+
+ if (in_interrupt())
+ panic("Fatal exception in interrupt");
+ if (panic_on_oops)
+ panic("Fatal exception");
+ if (ret != NOTIFY_STOP)
+ do_exit(SIGSEGV);
+}
+
+void uc32_notify_die(const char *str, struct pt_regs *regs,
+ struct siginfo *info, unsigned long err, unsigned long trap)
+{
+ if (user_mode(regs)) {
+ current->thread.error_code = err;
+ current->thread.trap_no = trap;
+
+ force_sig_info(info->si_signo, info, current);
+ } else
+ die(str, regs, err);
+}
+
+/*
+ * bad_mode handles the impossible case in the vectors. If you see one of
+ * these, then it's extremely serious, and could mean you have buggy hardware.
+ * It never returns, and never tries to sync. We hope that we can at least
+ * dump out some state information...
+ */
+asmlinkage void bad_mode(struct pt_regs *regs, unsigned int reason)
+{
+ console_verbose();
+
+ printk(KERN_CRIT "Bad mode detected with reason 0x%x\n", reason);
+
+ die("Oops - bad mode", regs, 0);
+ local_irq_disable();
+ panic("bad mode");
+}
+
+void __pte_error(const char *file, int line, unsigned long val)
+{
+ printk(KERN_DEFAULT "%s:%d: bad pte %08lx.\n", file, line, val);
+}
+
+void __pmd_error(const char *file, int line, unsigned long val)
+{
+ printk(KERN_DEFAULT "%s:%d: bad pmd %08lx.\n", file, line, val);
+}
+
+void __pgd_error(const char *file, int line, unsigned long val)
+{
+ printk(KERN_DEFAULT "%s:%d: bad pgd %08lx.\n", file, line, val);
+}
+
+asmlinkage void __div0(void)
+{
+ printk(KERN_DEFAULT "Division by zero in kernel.\n");
+ dump_stack();
+}
+EXPORT_SYMBOL(__div0);
+
+void abort(void)
+{
+ BUG();
+
+ /* if that doesn't kill us, halt */
+ panic("Oops failed to kill thread");
+}
+EXPORT_SYMBOL(abort);
+
+void __init trap_init(void)
+{
+ return;
+}
+
+void __init early_trap_init(void)
+{
+ unsigned long vectors = VECTORS_BASE;
+
+ /*
+ * Copy the vectors, stubs (in entry-unicore.S)
+ * into the vector page, mapped at 0xffff0000, and ensure these
+ * are visible to the instruction stream.
+ */
+ memcpy((void *)vectors,
+ __vectors_start,
+ __vectors_end - __vectors_start);
+ memcpy((void *)vectors + 0x200,
+ __stubs_start,
+ __stubs_end - __stubs_start);
+
+ early_signal_init();
+
+ flush_icache_range(vectors, vectors + PAGE_SIZE);
+}
diff --git a/arch/unicore32/kernel/vmlinux.lds.S b/arch/unicore32/kernel/vmlinux.lds.S
new file mode 100644
index 00000000000..0b4eb89729e
--- /dev/null
+++ b/arch/unicore32/kernel/vmlinux.lds.S
@@ -0,0 +1,61 @@
+/*
+ * linux/arch/unicore32/kernel/vmlinux.lds.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+
+OUTPUT_ARCH(unicore32)
+ENTRY(stext)
+
+jiffies = jiffies_64;
+
+SECTIONS
+{
+ . = PAGE_OFFSET + KERNEL_IMAGE_START;
+
+ _text = .;
+ __init_begin = .;
+ HEAD_TEXT_SECTION
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ INIT_DATA_SECTION(16)
+ PERCPU(PAGE_SIZE)
+ __init_end = .;
+
+ _stext = .;
+ .text : { /* Real text segment */
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+
+ *(.fixup)
+ *(.gnu.warning)
+ }
+ _etext = .;
+
+ _sdata = .;
+ RO_DATA_SECTION(PAGE_SIZE)
+ RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
+ _edata = .;
+
+ EXCEPTION_TABLE(32)
+ NOTES
+
+ BSS_SECTION(0, 0, 0)
+ _end = .;
+
+ STABS_DEBUG
+ DWARF_DEBUG
+
+ DISCARDS /* Exit code and data */
+}
diff --git a/arch/unicore32/lib/Makefile b/arch/unicore32/lib/Makefile
new file mode 100644
index 00000000000..87229a558b3
--- /dev/null
+++ b/arch/unicore32/lib/Makefile
@@ -0,0 +1,27 @@
+#
+# linux/arch/unicore32/lib/Makefile
+#
+# Copyright (C) 2001-2010 GUAN Xue-tao
+#
+
+lib-y := backtrace.o delay.o findbit.o
+lib-y += strncpy_from_user.o strnlen_user.o
+lib-y += clear_user.o copy_page.o
+lib-y += copy_from_user.o copy_to_user.o
+
+GNU_LIBC_A := $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libc.a)
+GNU_LIBC_A_OBJS := memchr.o memcpy.o memmove.o memset.o
+GNU_LIBC_A_OBJS += strchr.o strrchr.o
+GNU_LIBC_A_OBJS += rawmemchr.o # needed by strrchr.o
+
+GNU_LIBGCC_A := $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libgcc.a)
+GNU_LIBGCC_A_OBJS := _ashldi3.o _ashrdi3.o _lshrdi3.o
+GNU_LIBGCC_A_OBJS += _divsi3.o _modsi3.o _ucmpdi2.o _umodsi3.o _udivsi3.o
+
+lib-y += $(GNU_LIBC_A_OBJS) $(GNU_LIBGCC_A_OBJS)
+
+$(addprefix $(obj)/, $(GNU_LIBC_A_OBJS)):
+ $(Q)$(AR) p $(GNU_LIBC_A) $(notdir $@) > $@
+
+$(addprefix $(obj)/, $(GNU_LIBGCC_A_OBJS)):
+ $(Q)$(AR) p $(GNU_LIBGCC_A) $(notdir $@) > $@
diff --git a/arch/unicore32/lib/backtrace.S b/arch/unicore32/lib/backtrace.S
new file mode 100644
index 00000000000..ef01d77f2f6
--- /dev/null
+++ b/arch/unicore32/lib/backtrace.S
@@ -0,0 +1,163 @@
+/*
+ * linux/arch/unicore32/lib/backtrace.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+ .text
+
+@ fp is 0 or stack frame
+
+#define frame v4
+#define sv_fp v5
+#define sv_pc v6
+#define offset v8
+
+ENTRY(__backtrace)
+ mov r0, fp
+
+ENTRY(c_backtrace)
+
+#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
+ mov pc, lr
+ENDPROC(__backtrace)
+ENDPROC(c_backtrace)
+#else
+ stm.w (v4 - v8, lr), [sp-] @ Save an extra register
+ @ so we have a location...
+ mov.a frame, r0 @ if frame pointer is zero
+ beq no_frame @ we have no stack frames
+
+1: stm.w (pc), [sp-] @ calculate offset of PC stored
+ ldw.w r0, [sp]+, #4 @ by stmfd for this CPU
+ adr r1, 1b
+ sub offset, r0, r1
+
+/*
+ * Stack frame layout:
+ * optionally saved caller registers (r4 - r10)
+ * saved fp
+ * saved sp
+ * saved lr
+ * frame => saved pc
+ * optionally saved arguments (r0 - r3)
+ * saved sp => <next word>
+ *
+ * Functions start with the following code sequence:
+ * mov ip, sp
+ * stm.w (r0 - r3), [sp-] (optional)
+ * corrected pc => stm.w sp, (..., fp, ip, lr, pc)
+ */
+for_each_frame:
+
+1001: ldw sv_pc, [frame+], #0 @ get saved pc
+1002: ldw sv_fp, [frame+], #-12 @ get saved fp
+
+ sub sv_pc, sv_pc, offset @ Correct PC for prefetching
+
+1003: ldw r2, [sv_pc+], #-4 @ if stmfd sp, {args} exists,
+ ldw r3, .Ldsi+4 @ adjust saved 'pc' back one
+ cxor.a r3, r2 >> #14 @ instruction
+ beq 201f
+ sub r0, sv_pc, #4 @ allow for mov
+ b 202f
+201:
+ sub r0, sv_pc, #8 @ allow for mov + stmia
+202:
+ ldw r1, [frame+], #-4 @ get saved lr
+ mov r2, frame
+ b.l dump_backtrace_entry
+
+ ldw r1, [sv_pc+], #-4 @ if stmfd sp, {args} exists,
+ ldw r3, .Ldsi+4
+ cxor.a r3, r1 >> #14
+ bne 1004f
+ ldw r0, [frame+], #-8 @ get sp
+ sub r0, r0, #4 @ point at the last arg
+ b.l .Ldumpstm @ dump saved registers
+
+1004: ldw r1, [sv_pc+], #0 @ if stmfd {, fp, ip, lr, pc}
+ ldw r3, .Ldsi @ instruction exists,
+ cxor.a r3, r1 >> #14
+ bne 201f
+ sub r0, frame, #16
+ b.l .Ldumpstm @ dump saved registers
+201:
+ cxor.a sv_fp, #0 @ zero saved fp means
+ beq no_frame @ no further frames
+
+ csub.a sv_fp, frame @ next frame must be
+ mov frame, sv_fp @ above the current frame
+ bua for_each_frame
+
+1006: adr r0, .Lbad
+ mov r1, frame
+ b.l printk
+no_frame: ldm.w (v4 - v8, pc), [sp]+
+ENDPROC(__backtrace)
+ENDPROC(c_backtrace)
+
+ .pushsection __ex_table,"a"
+ .align 3
+ .long 1001b, 1006b
+ .long 1002b, 1006b
+ .long 1003b, 1006b
+ .long 1004b, 1006b
+ .popsection
+
+#define instr v4
+#define reg v5
+#define stack v6
+
+.Ldumpstm: stm.w (instr, reg, stack, v7, lr), [sp-]
+ mov stack, r0
+ mov instr, r1
+ mov reg, #14
+ mov v7, #0
+1: mov r3, #1
+ csub.a reg, #8
+ bne 201f
+ sub reg, reg, #3
+201:
+ cand.a instr, r3 << reg
+ beq 2f
+ add v7, v7, #1
+ cxor.a v7, #6
+ cmoveq v7, #1
+ cmoveq r1, #'\n'
+ cmovne r1, #' '
+ ldw.w r3, [stack]+, #-4
+ mov r2, reg
+ csub.a r2, #8
+ bsl 201f
+ sub r2, r2, #3
+201:
+ cand.a instr, #0x40 @ if H is 1, high 16 regs
+ beq 201f
+ add r2, r2, #0x10 @ so r2 need add 16
+201:
+ adr r0, .Lfp
+ b.l printk
+2: sub.a reg, reg, #1
+ bns 1b
+ cxor.a v7, #0
+ beq 201f
+ adr r0, .Lcr
+ b.l printk
+201: ldm.w (instr, reg, stack, v7, pc), [sp]+
+
+.Lfp: .asciz "%cr%d:%08x"
+.Lcr: .asciz "\n"
+.Lbad: .asciz "Backtrace aborted due to bad frame pointer <%p>\n"
+ .align
+.Ldsi: .word 0x92eec000 >> 14 @ stm.w sp, (... fp, ip, lr, pc)
+ .word 0x92e10000 >> 14 @ stm.w sp, ()
+
+#endif
diff --git a/arch/unicore32/lib/clear_user.S b/arch/unicore32/lib/clear_user.S
new file mode 100644
index 00000000000..20047f7224f
--- /dev/null
+++ b/arch/unicore32/lib/clear_user.S
@@ -0,0 +1,57 @@
+/*
+ * linux/arch/unicore32/lib/clear_user.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ .text
+
+/* Prototype: int __clear_user(void *addr, size_t sz)
+ * Purpose : clear some user memory
+ * Params : addr - user memory address to clear
+ * : sz - number of bytes to clear
+ * Returns : number of bytes NOT cleared
+ */
+WEAK(__clear_user)
+ stm.w (lr), [sp-]
+ stm.w (r1), [sp-]
+ mov r2, #0
+ csub.a r1, #4
+ bsl 2f
+ and.a ip, r0, #3
+ beq 1f
+ csub.a ip, #2
+ strusr r2, r0, 1
+ strusr r2, r0, 1, el
+ strusr r2, r0, 1, sl
+ rsub ip, ip, #4
+ sub r1, r1, ip @ 7 6 5 4 3 2 1
+1: sub.a r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7
+ strusr r2, r0, 4, ns, rept=2
+ bns 1b
+ add.a r1, r1, #4 @ 3 2 1 0 -1 -2 -3
+ strusr r2, r0, 4, ns
+2: cand.a r1, #2 @ 1x 1x 0x 0x 1x 1x 0x
+ strusr r2, r0, 1, ne, rept=2
+ cand.a r1, #1 @ x1 x0 x1 x0 x1 x0 x1
+ beq 3f
+USER( stb.u r2, [r0])
+3: mov r0, #0
+ ldm.w (r1), [sp]+
+ ldm.w (pc), [sp]+
+ENDPROC(__clear_user)
+
+ .pushsection .fixup,"ax"
+ .align 0
+9001: ldm.w (r0), [sp]+
+ ldm.w (pc), [sp]+
+ .popsection
+
diff --git a/arch/unicore32/lib/copy_from_user.S b/arch/unicore32/lib/copy_from_user.S
new file mode 100644
index 00000000000..ab0767ea5db
--- /dev/null
+++ b/arch/unicore32/lib/copy_from_user.S
@@ -0,0 +1,108 @@
+/*
+ * linux/arch/unicore32/lib/copy_from_user.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Prototype:
+ *
+ * size_t __copy_from_user(void *to, const void *from, size_t n)
+ *
+ * Purpose:
+ *
+ * copy a block to kernel memory from user memory
+ *
+ * Params:
+ *
+ * to = kernel memory
+ * from = user memory
+ * n = number of bytes to copy
+ *
+ * Return value:
+ *
+ * Number of bytes NOT copied.
+ */
+
+ .macro ldr1w ptr reg abort
+ ldrusr \reg, \ptr, 4, abort=\abort
+ .endm
+
+ .macro ldr4w ptr reg1 reg2 reg3 reg4 abort
+100: ldm.w (\reg1, \reg2, \reg3, \reg4), [\ptr]+
+ .pushsection __ex_table, "a"
+ .align 3
+ .long 100b, \abort
+ .popsection
+ .endm
+
+ .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+100: ldm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
+ .pushsection __ex_table, "a"
+ .align 3
+ .long 100b, \abort
+ .popsection
+ .endm
+
+ .macro ldr1b ptr reg cond=al abort
+ ldrusr \reg, \ptr, 1, \cond, abort=\abort
+ .endm
+
+ .macro str1w ptr reg abort
+ stw.w \reg, [\ptr]+, #4
+ .endm
+
+ .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+ stm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
+ .endm
+
+ .macro str1b ptr reg cond=al abort
+ .ifnc \cond, al
+ b\cond 201f
+ b 202f
+ .endif
+201: stb.w \reg, [\ptr]+, #1
+202:
+ .endm
+
+ .macro enter
+ mov r3, #0
+ stm.w (r0, r2, r3), [sp-]
+ .endm
+
+ .macro exit
+ add sp, sp, #8
+ ldm.w (r0), [sp]+
+ mov pc, lr
+ .endm
+
+ .text
+
+ENTRY(__copy_from_user)
+
+#include "copy_template.S"
+
+ENDPROC(__copy_from_user)
+
+ .pushsection .fixup,"ax"
+ .align 0
+ copy_abort_preamble
+ ldm.w (r1, r2), [sp]+
+ sub r3, r0, r1
+ rsub r2, r3, r2
+ stw r2, [sp]
+ mov r1, #0
+ b.l memset
+ ldw.w r0, [sp]+, #4
+ copy_abort_end
+ .popsection
+
diff --git a/arch/unicore32/lib/copy_page.S b/arch/unicore32/lib/copy_page.S
new file mode 100644
index 00000000000..3a448d755ad
--- /dev/null
+++ b/arch/unicore32/lib/copy_page.S
@@ -0,0 +1,39 @@
+/*
+ * linux/arch/unicore32/lib/copy_page.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ASM optimised string functions
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <generated/asm-offsets.h>
+#include <asm/cache.h>
+
+#define COPY_COUNT (PAGE_SZ/256)
+
+ .text
+ .align 5
+/*
+ * UniCore optimised copy_page routine
+ */
+ENTRY(copy_page)
+ stm.w (r17 - r19, lr), [sp-]
+ mov r17, r0
+ mov r18, r1
+ mov r19, #COPY_COUNT
+1:
+ .rept 4
+ ldm.w (r0 - r15), [r18]+
+ stm.w (r0 - r15), [r17]+
+ .endr
+ sub.a r19, r19, #1
+ bne 1b
+ ldm.w (r17 - r19, pc), [sp]+
+ENDPROC(copy_page)
diff --git a/arch/unicore32/lib/copy_template.S b/arch/unicore32/lib/copy_template.S
new file mode 100644
index 00000000000..524287fc012
--- /dev/null
+++ b/arch/unicore32/lib/copy_template.S
@@ -0,0 +1,214 @@
+/*
+ * linux/arch/unicore32/lib/copy_template.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Theory of operation
+ * -------------------
+ *
+ * This file provides the core code for a forward memory copy used in
+ * the implementation of memcopy(), copy_to_user() and copy_from_user().
+ *
+ * The including file must define the following accessor macros
+ * according to the need of the given function:
+ *
+ * ldr1w ptr reg abort
+ *
+ * This loads one word from 'ptr', stores it in 'reg' and increments
+ * 'ptr' to the next word. The 'abort' argument is used for fixup tables.
+ *
+ * ldr4w ptr reg1 reg2 reg3 reg4 abort
+ * ldr8w ptr, reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+ *
+ * This loads four or eight words starting from 'ptr', stores them
+ * in provided registers and increments 'ptr' past those words.
+ * The'abort' argument is used for fixup tables.
+ *
+ * ldr1b ptr reg cond abort
+ *
+ * Similar to ldr1w, but it loads a byte and increments 'ptr' one byte.
+ * It also must apply the condition code if provided, otherwise the
+ * "al" condition is assumed by default.
+ *
+ * str1w ptr reg abort
+ * str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+ * str1b ptr reg cond abort
+ *
+ * Same as their ldr* counterparts, but data is stored to 'ptr' location
+ * rather than being loaded.
+ *
+ * enter
+ *
+ * Preserve the provided registers on the stack plus any additional
+ * data as needed by the implementation including this code. Called
+ * upon code entry.
+ *
+ * exit
+ *
+ * Restore registers with the values previously saved with the
+ * 'preserv' macro. Called upon code termination.
+ */
+
+
+ enter
+
+ sub.a r2, r2, #4
+ bsl 8f
+ and.a ip, r0, #3
+ bne 9f
+ and.a ip, r1, #3
+ bne 10f
+
+1: sub.a r2, r2, #(28)
+ stm.w (r5 - r8), [sp-]
+ bsl 5f
+
+3:
+4: ldr8w r1, r3, r4, r5, r6, r7, r8, r10, r11, abort=20f
+ sub.a r2, r2, #32
+ str8w r0, r3, r4, r5, r6, r7, r8, r10, r11, abort=20f
+ beg 3b
+
+5: and.a ip, r2, #28
+ rsub ip, ip, #32
+ beq 7f
+ add pc, pc, ip @ C is always clear here
+ nop
+
+ ldr1w r1, r3, abort=20f
+ ldr1w r1, r4, abort=20f
+ ldr1w r1, r5, abort=20f
+ ldr1w r1, r6, abort=20f
+ ldr1w r1, r7, abort=20f
+ ldr1w r1, r8, abort=20f
+ ldr1w r1, r11, abort=20f
+
+ add pc, pc, ip
+ nop
+
+ str1w r0, r3, abort=20f
+ str1w r0, r4, abort=20f
+ str1w r0, r5, abort=20f
+ str1w r0, r6, abort=20f
+ str1w r0, r7, abort=20f
+ str1w r0, r8, abort=20f
+ str1w r0, r11, abort=20f
+
+7: ldm.w (r5 - r8), [sp]+
+
+8: mov.a r2, r2 << #31
+ ldr1b r1, r3, ne, abort=21f
+ ldr1b r1, r4, ea, abort=21f
+ ldr1b r1, r10, ea, abort=21f
+ str1b r0, r3, ne, abort=21f
+ str1b r0, r4, ea, abort=21f
+ str1b r0, r10, ea, abort=21f
+
+ exit
+
+9: rsub ip, ip, #4
+ csub.a ip, #2
+ ldr1b r1, r3, sg, abort=21f
+ ldr1b r1, r4, eg, abort=21f
+ ldr1b r1, r11, abort=21f
+ str1b r0, r3, sg, abort=21f
+ str1b r0, r4, eg, abort=21f
+ sub.a r2, r2, ip
+ str1b r0, r11, abort=21f
+ bsl 8b
+ and.a ip, r1, #3
+ beq 1b
+
+10: andn r1, r1, #3
+ csub.a ip, #2
+ ldr1w r1, r11, abort=21f
+ beq 17f
+ bsg 18f
+
+
+ .macro forward_copy_shift a b
+
+ sub.a r2, r2, #28
+ bsl 14f
+
+11: stm.w (r5 - r9), [sp-]
+
+12:
+ ldr4w r1, r4, r5, r6, r7, abort=19f
+ mov r3, r11 pull #\a
+ sub.a r2, r2, #32
+ ldr4w r1, r8, r9, r10, r11, abort=19f
+ or r3, r3, r4 push #\b
+ mov r4, r4 pull #\a
+ or r4, r4, r5 push #\b
+ mov r5, r5 pull #\a
+ or r5, r5, r6 push #\b
+ mov r6, r6 pull #\a
+ or r6, r6, r7 push #\b
+ mov r7, r7 pull #\a
+ or r7, r7, r8 push #\b
+ mov r8, r8 pull #\a
+ or r8, r8, r9 push #\b
+ mov r9, r9 pull #\a
+ or r9, r9, r10 push #\b
+ mov r10, r10 pull #\a
+ or r10, r10, r11 push #\b
+ str8w r0, r3, r4, r5, r6, r7, r8, r9, r10, , abort=19f
+ beg 12b
+
+ ldm.w (r5 - r9), [sp]+
+
+14: and.a ip, r2, #28
+ beq 16f
+
+15: mov r3, r11 pull #\a
+ ldr1w r1, r11, abort=21f
+ sub.a ip, ip, #4
+ or r3, r3, r11 push #\b
+ str1w r0, r3, abort=21f
+ bsg 15b
+
+16: sub r1, r1, #(\b / 8)
+ b 8b
+
+ .endm
+
+
+ forward_copy_shift a=8 b=24
+
+17: forward_copy_shift a=16 b=16
+
+18: forward_copy_shift a=24 b=8
+
+
+/*
+ * Abort preamble and completion macros.
+ * If a fixup handler is required then those macros must surround it.
+ * It is assumed that the fixup code will handle the private part of
+ * the exit macro.
+ */
+
+ .macro copy_abort_preamble
+19: ldm.w (r5 - r9), [sp]+
+ b 21f
+299: .word 0 @ store lr
+ @ to avoid function call in fixup
+20: ldm.w (r5 - r8), [sp]+
+21:
+ adr r1, 299b
+ stw lr, [r1]
+ .endm
+
+ .macro copy_abort_end
+ adr lr, 299b
+ ldw pc, [lr]
+ .endm
+
diff --git a/arch/unicore32/lib/copy_to_user.S b/arch/unicore32/lib/copy_to_user.S
new file mode 100644
index 00000000000..6e22151c840
--- /dev/null
+++ b/arch/unicore32/lib/copy_to_user.S
@@ -0,0 +1,96 @@
+/*
+ * linux/arch/unicore32/lib/copy_to_user.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Prototype:
+ *
+ * size_t __copy_to_user(void *to, const void *from, size_t n)
+ *
+ * Purpose:
+ *
+ * copy a block to user memory from kernel memory
+ *
+ * Params:
+ *
+ * to = user memory
+ * from = kernel memory
+ * n = number of bytes to copy
+ *
+ * Return value:
+ *
+ * Number of bytes NOT copied.
+ */
+
+ .macro ldr1w ptr reg abort
+ ldw.w \reg, [\ptr]+, #4
+ .endm
+
+ .macro ldr4w ptr reg1 reg2 reg3 reg4 abort
+ ldm.w (\reg1, \reg2, \reg3, \reg4), [\ptr]+
+ .endm
+
+ .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+ ldm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
+ .endm
+
+ .macro ldr1b ptr reg cond=al abort
+ notcond \cond, .+8
+ ldb.w \reg, [\ptr]+, #1
+ .endm
+
+ .macro str1w ptr reg abort
+ strusr \reg, \ptr, 4, abort=\abort
+ .endm
+
+ .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+100: stm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
+
+ .pushsection __ex_table, "a"
+ .long 100b, \abort
+ .popsection
+ .endm
+
+ .macro str1b ptr reg cond=al abort
+ strusr \reg, \ptr, 1, \cond, abort=\abort
+ .endm
+
+ .macro enter
+ mov r3, #0
+ stm.w (r0, r2, r3), [sp-]
+ .endm
+
+ .macro exit
+ add sp, sp, #8
+ ldm.w (r0), [sp]+
+ mov pc, lr
+ .endm
+
+ .text
+
+WEAK(__copy_to_user)
+
+#include "copy_template.S"
+
+ENDPROC(__copy_to_user)
+
+ .pushsection .fixup,"ax"
+ .align 0
+ copy_abort_preamble
+ ldm.w (r1, r2, r3), [sp]+
+ sub r0, r0, r1
+ rsub r0, r0, r2
+ copy_abort_end
+ .popsection
+
diff --git a/arch/unicore32/lib/delay.S b/arch/unicore32/lib/delay.S
new file mode 100644
index 00000000000..24664c009e7
--- /dev/null
+++ b/arch/unicore32/lib/delay.S
@@ -0,0 +1,51 @@
+/*
+ * linux/arch/unicore32/lib/delay.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/param.h>
+ .text
+
+.LC0: .word loops_per_jiffy
+.LC1: .word (2199023*HZ)>>11
+
+/*
+ * r0 <= 2000
+ * lpj <= 0x01ffffff (max. 3355 bogomips)
+ * HZ <= 1000
+ */
+
+ENTRY(__udelay)
+ ldw r2, .LC1
+ mul r0, r2, r0
+ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06
+ ldw r2, .LC0
+ ldw r2, [r2] @ max = 0x01ffffff
+ mov r0, r0 >> #14 @ max = 0x0001ffff
+ mov r2, r2 >> #10 @ max = 0x00007fff
+ mul r0, r2, r0 @ max = 2^32-1
+ mov.a r0, r0 >> #6
+ cmoveq pc, lr
+
+/*
+ * loops = r0 * HZ * loops_per_jiffy / 1000000
+ *
+ * Oh, if only we had a cycle counter...
+ */
+
+@ Delay routine
+ENTRY(__delay)
+ sub.a r0, r0, #2
+ bua __delay
+ mov pc, lr
+ENDPROC(__udelay)
+ENDPROC(__const_udelay)
+ENDPROC(__delay)
diff --git a/arch/unicore32/lib/findbit.S b/arch/unicore32/lib/findbit.S
new file mode 100644
index 00000000000..c360ce905d8
--- /dev/null
+++ b/arch/unicore32/lib/findbit.S
@@ -0,0 +1,98 @@
+/*
+ * linux/arch/unicore32/lib/findbit.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+ .text
+
+/*
+ * Purpose : Find a 'zero' bit
+ * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
+ */
+__uc32_find_first_zero_bit:
+ cxor.a r1, #0
+ beq 3f
+ mov r2, #0
+1: ldb r3, [r0+], r2 >> #3
+ xor.a r3, r3, #0xff @ invert bits
+ bne .L_found @ any now set - found zero bit
+ add r2, r2, #8 @ next bit pointer
+2: csub.a r2, r1 @ any more?
+ bub 1b
+3: mov r0, r1 @ no free bits
+ mov pc, lr
+
+/*
+ * Purpose : Find next 'zero' bit
+ * Prototype: int find_next_zero_bit
+ * (void *addr, unsigned int maxbit, int offset)
+ */
+ENTRY(__uc32_find_next_zero_bit)
+ cxor.a r1, #0
+ beq 3b
+ and.a ip, r2, #7
+ beq 1b @ If new byte, goto old routine
+ ldb r3, [r0+], r2 >> #3
+ xor r3, r3, #0xff @ now looking for a 1 bit
+ mov.a r3, r3 >> ip @ shift off unused bits
+ bne .L_found
+ or r2, r2, #7 @ if zero, then no bits here
+ add r2, r2, #1 @ align bit pointer
+ b 2b @ loop for next bit
+ENDPROC(__uc32_find_next_zero_bit)
+
+/*
+ * Purpose : Find a 'one' bit
+ * Prototype: int find_first_bit
+ * (const unsigned long *addr, unsigned int maxbit);
+ */
+__uc32_find_first_bit:
+ cxor.a r1, #0
+ beq 3f
+ mov r2, #0
+1: ldb r3, [r0+], r2 >> #3
+ mov.a r3, r3
+ bne .L_found @ any now set - found zero bit
+ add r2, r2, #8 @ next bit pointer
+2: csub.a r2, r1 @ any more?
+ bub 1b
+3: mov r0, r1 @ no free bits
+ mov pc, lr
+
+/*
+ * Purpose : Find next 'one' bit
+ * Prototype: int find_next_zero_bit
+ * (void *addr, unsigned int maxbit, int offset)
+ */
+ENTRY(__uc32_find_next_bit)
+ cxor.a r1, #0
+ beq 3b
+ and.a ip, r2, #7
+ beq 1b @ If new byte, goto old routine
+ ldb r3, [r0+], r2 >> #3
+ mov.a r3, r3 >> ip @ shift off unused bits
+ bne .L_found
+ or r2, r2, #7 @ if zero, then no bits here
+ add r2, r2, #1 @ align bit pointer
+ b 2b @ loop for next bit
+ENDPROC(__uc32_find_next_bit)
+
+/*
+ * One or more bits in the LSB of r3 are assumed to be set.
+ */
+.L_found:
+ rsub r1, r3, #0
+ and r3, r3, r1
+ cntlz r3, r3
+ rsub r3, r3, #31
+ add r0, r2, r3
+ mov pc, lr
+
diff --git a/arch/unicore32/lib/strncpy_from_user.S b/arch/unicore32/lib/strncpy_from_user.S
new file mode 100644
index 00000000000..ff6c304d5c7
--- /dev/null
+++ b/arch/unicore32/lib/strncpy_from_user.S
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/unicore32/lib/strncpy_from_user.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+
+ .text
+ .align 5
+
+/*
+ * Copy a string from user space to kernel space.
+ * r0 = dst, r1 = src, r2 = byte length
+ * returns the number of characters copied (strlen of copied string),
+ * -EFAULT on exception, or "len" if we fill the whole buffer
+ */
+ENTRY(__strncpy_from_user)
+ mov ip, r1
+1: sub.a r2, r2, #1
+ ldrusr r3, r1, 1, ns
+ bfs 2f
+ stb.w r3, [r0]+, #1
+ cxor.a r3, #0
+ bne 1b
+ sub r1, r1, #1 @ take NUL character out of count
+2: sub r0, r1, ip
+ mov pc, lr
+ENDPROC(__strncpy_from_user)
+
+ .pushsection .fixup,"ax"
+ .align 0
+9001: mov r3, #0
+ stb r3, [r0+], #0 @ null terminate
+ mov r0, #-EFAULT
+ mov pc, lr
+ .popsection
+
diff --git a/arch/unicore32/lib/strnlen_user.S b/arch/unicore32/lib/strnlen_user.S
new file mode 100644
index 00000000000..75863030f21
--- /dev/null
+++ b/arch/unicore32/lib/strnlen_user.S
@@ -0,0 +1,42 @@
+/*
+ * linux/arch/unicore32/lib/strnlen_user.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+
+ .text
+ .align 5
+
+/* Prototype: unsigned long __strnlen_user(const char *str, long n)
+ * Purpose : get length of a string in user memory
+ * Params : str - address of string in user memory
+ * Returns : length of string *including terminator*
+ * or zero on exception, or n + 1 if too long
+ */
+ENTRY(__strnlen_user)
+ mov r2, r0
+1:
+ ldrusr r3, r0, 1
+ cxor.a r3, #0
+ beq 2f
+ sub.a r1, r1, #1
+ bne 1b
+ add r0, r0, #1
+2: sub r0, r0, r2
+ mov pc, lr
+ENDPROC(__strnlen_user)
+
+ .pushsection .fixup,"ax"
+ .align 0
+9001: mov r0, #0
+ mov pc, lr
+ .popsection
diff --git a/arch/unicore32/mm/Kconfig b/arch/unicore32/mm/Kconfig
new file mode 100644
index 00000000000..5f77fb3c63b
--- /dev/null
+++ b/arch/unicore32/mm/Kconfig
@@ -0,0 +1,50 @@
+comment "Processor Type"
+
+# Select CPU types depending on the architecture selected. This selects
+# which CPUs we support in the kernel image, and the compiler instruction
+# optimiser behaviour.
+
+config CPU_UCV2
+ def_bool y
+
+comment "Processor Features"
+
+config CPU_ICACHE_DISABLE
+ bool "Disable I-Cache (I-bit)"
+ help
+ Say Y here to disable the processor instruction cache. Unless
+ you have a reason not to or are unsure, say N.
+
+config CPU_DCACHE_DISABLE
+ bool "Disable D-Cache (D-bit)"
+ help
+ Say Y here to disable the processor data cache. Unless
+ you have a reason not to or are unsure, say N.
+
+config CPU_DCACHE_WRITETHROUGH
+ bool "Force write through D-cache"
+ help
+ Say Y here to use the data cache in writethrough mode. Unless you
+ specifically require this or are unsure, say N.
+
+config CPU_DCACHE_LINE_DISABLE
+ bool "Disable D-cache line ops"
+ default y
+ help
+ Say Y here to disable the data cache line operations.
+
+config CPU_TLB_SINGLE_ENTRY_DISABLE
+ bool "Disable TLB single entry ops"
+ default y
+ help
+ Say Y here to disable the TLB single entry operations.
+
+config SWIOTLB
+ def_bool y
+
+config IOMMU_HELPER
+ def_bool SWIOTLB
+
+config NEED_SG_DMA_LENGTH
+ def_bool SWIOTLB
+
diff --git a/arch/unicore32/mm/Makefile b/arch/unicore32/mm/Makefile
new file mode 100644
index 00000000000..46c16669931
--- /dev/null
+++ b/arch/unicore32/mm/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for the linux unicore-specific parts of the memory manager.
+#
+
+obj-y := extable.o fault.o init.o pgd.o mmu.o
+obj-y += flush.o ioremap.o
+
+obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
+
+obj-$(CONFIG_MODULES) += proc-syms.o
+
+obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o
+
+obj-$(CONFIG_CPU_UCV2) += cache-ucv2.o tlb-ucv2.o proc-ucv2.o
+
diff --git a/arch/unicore32/mm/alignment.c b/arch/unicore32/mm/alignment.c
new file mode 100644
index 00000000000..28f576d733e
--- /dev/null
+++ b/arch/unicore32/mm/alignment.c
@@ -0,0 +1,523 @@
+/*
+ * linux/arch/unicore32/mm/alignment.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/*
+ * TODO:
+ * FPU ldm/stm not handling
+ */
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+
+#include <asm/tlbflush.h>
+#include <asm/unaligned.h>
+
+#define CODING_BITS(i) (i & 0xe0000120)
+
+#define LDST_P_BIT(i) (i & (1 << 28)) /* Preindex */
+#define LDST_U_BIT(i) (i & (1 << 27)) /* Add offset */
+#define LDST_W_BIT(i) (i & (1 << 25)) /* Writeback */
+#define LDST_L_BIT(i) (i & (1 << 24)) /* Load */
+
+#define LDST_P_EQ_U(i) ((((i) ^ ((i) >> 1)) & (1 << 27)) == 0)
+
+#define LDSTH_I_BIT(i) (i & (1 << 26)) /* half-word immed */
+#define LDM_S_BIT(i) (i & (1 << 26)) /* write ASR from BSR */
+#define LDM_H_BIT(i) (i & (1 << 6)) /* select r0-r15 or r16-r31 */
+
+#define RN_BITS(i) ((i >> 19) & 31) /* Rn */
+#define RD_BITS(i) ((i >> 14) & 31) /* Rd */
+#define RM_BITS(i) (i & 31) /* Rm */
+
+#define REGMASK_BITS(i) (((i & 0x7fe00) >> 3) | (i & 0x3f))
+#define OFFSET_BITS(i) (i & 0x03fff)
+
+#define SHIFT_BITS(i) ((i >> 9) & 0x1f)
+#define SHIFT_TYPE(i) (i & 0xc0)
+#define SHIFT_LSL 0x00
+#define SHIFT_LSR 0x40
+#define SHIFT_ASR 0x80
+#define SHIFT_RORRRX 0xc0
+
+union offset_union {
+ unsigned long un;
+ signed long sn;
+};
+
+#define TYPE_ERROR 0
+#define TYPE_FAULT 1
+#define TYPE_LDST 2
+#define TYPE_DONE 3
+#define TYPE_SWAP 4
+#define TYPE_COLS 5 /* Coprocessor load/store */
+
+#define get8_unaligned_check(val, addr, err) \
+ __asm__( \
+ "1: ldb.u %1, [%2], #1\n" \
+ "2:\n" \
+ " .pushsection .fixup,\"ax\"\n" \
+ " .align 2\n" \
+ "3: mov %0, #1\n" \
+ " b 2b\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
+ " .align 3\n" \
+ " .long 1b, 3b\n" \
+ " .popsection\n" \
+ : "=r" (err), "=&r" (val), "=r" (addr) \
+ : "0" (err), "2" (addr))
+
+#define get8t_unaligned_check(val, addr, err) \
+ __asm__( \
+ "1: ldb.u %1, [%2], #1\n" \
+ "2:\n" \
+ " .pushsection .fixup,\"ax\"\n" \
+ " .align 2\n" \
+ "3: mov %0, #1\n" \
+ " b 2b\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
+ " .align 3\n" \
+ " .long 1b, 3b\n" \
+ " .popsection\n" \
+ : "=r" (err), "=&r" (val), "=r" (addr) \
+ : "0" (err), "2" (addr))
+
+#define get16_unaligned_check(val, addr) \
+ do { \
+ unsigned int err = 0, v, a = addr; \
+ get8_unaligned_check(val, a, err); \
+ get8_unaligned_check(v, a, err); \
+ val |= v << 8; \
+ if (err) \
+ goto fault; \
+ } while (0)
+
+#define put16_unaligned_check(val, addr) \
+ do { \
+ unsigned int err = 0, v = val, a = addr; \
+ __asm__( \
+ "1: stb.u %1, [%2], #1\n" \
+ " mov %1, %1 >> #8\n" \
+ "2: stb.u %1, [%2]\n" \
+ "3:\n" \
+ " .pushsection .fixup,\"ax\"\n" \
+ " .align 2\n" \
+ "4: mov %0, #1\n" \
+ " b 3b\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
+ " .align 3\n" \
+ " .long 1b, 4b\n" \
+ " .long 2b, 4b\n" \
+ " .popsection\n" \
+ : "=r" (err), "=&r" (v), "=&r" (a) \
+ : "0" (err), "1" (v), "2" (a)); \
+ if (err) \
+ goto fault; \
+ } while (0)
+
+#define __put32_unaligned_check(ins, val, addr) \
+ do { \
+ unsigned int err = 0, v = val, a = addr; \
+ __asm__( \
+ "1: "ins" %1, [%2], #1\n" \
+ " mov %1, %1 >> #8\n" \
+ "2: "ins" %1, [%2], #1\n" \
+ " mov %1, %1 >> #8\n" \
+ "3: "ins" %1, [%2], #1\n" \
+ " mov %1, %1 >> #8\n" \
+ "4: "ins" %1, [%2]\n" \
+ "5:\n" \
+ " .pushsection .fixup,\"ax\"\n" \
+ " .align 2\n" \
+ "6: mov %0, #1\n" \
+ " b 5b\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
+ " .align 3\n" \
+ " .long 1b, 6b\n" \
+ " .long 2b, 6b\n" \
+ " .long 3b, 6b\n" \
+ " .long 4b, 6b\n" \
+ " .popsection\n" \
+ : "=r" (err), "=&r" (v), "=&r" (a) \
+ : "0" (err), "1" (v), "2" (a)); \
+ if (err) \
+ goto fault; \
+ } while (0)
+
+#define get32_unaligned_check(val, addr) \
+ do { \
+ unsigned int err = 0, v, a = addr; \
+ get8_unaligned_check(val, a, err); \
+ get8_unaligned_check(v, a, err); \
+ val |= v << 8; \
+ get8_unaligned_check(v, a, err); \
+ val |= v << 16; \
+ get8_unaligned_check(v, a, err); \
+ val |= v << 24; \
+ if (err) \
+ goto fault; \
+ } while (0)
+
+#define put32_unaligned_check(val, addr) \
+ __put32_unaligned_check("stb.u", val, addr)
+
+#define get32t_unaligned_check(val, addr) \
+ do { \
+ unsigned int err = 0, v, a = addr; \
+ get8t_unaligned_check(val, a, err); \
+ get8t_unaligned_check(v, a, err); \
+ val |= v << 8; \
+ get8t_unaligned_check(v, a, err); \
+ val |= v << 16; \
+ get8t_unaligned_check(v, a, err); \
+ val |= v << 24; \
+ if (err) \
+ goto fault; \
+ } while (0)
+
+#define put32t_unaligned_check(val, addr) \
+ __put32_unaligned_check("stb.u", val, addr)
+
+static void
+do_alignment_finish_ldst(unsigned long addr, unsigned long instr,
+ struct pt_regs *regs, union offset_union offset)
+{
+ if (!LDST_U_BIT(instr))
+ offset.un = -offset.un;
+
+ if (!LDST_P_BIT(instr))
+ addr += offset.un;
+
+ if (!LDST_P_BIT(instr) || LDST_W_BIT(instr))
+ regs->uregs[RN_BITS(instr)] = addr;
+}
+
+static int
+do_alignment_ldrhstrh(unsigned long addr, unsigned long instr,
+ struct pt_regs *regs)
+{
+ unsigned int rd = RD_BITS(instr);
+
+ /* old value 0x40002120, can't judge swap instr correctly */
+ if ((instr & 0x4b003fe0) == 0x40000120)
+ goto swp;
+
+ if (LDST_L_BIT(instr)) {
+ unsigned long val;
+ get16_unaligned_check(val, addr);
+
+ /* signed half-word? */
+ if (instr & 0x80)
+ val = (signed long)((signed short)val);
+
+ regs->uregs[rd] = val;
+ } else
+ put16_unaligned_check(regs->uregs[rd], addr);
+
+ return TYPE_LDST;
+
+swp:
+ /* only handle swap word
+ * for swap byte should not active this alignment exception */
+ get32_unaligned_check(regs->uregs[RD_BITS(instr)], addr);
+ put32_unaligned_check(regs->uregs[RM_BITS(instr)], addr);
+ return TYPE_SWAP;
+
+fault:
+ return TYPE_FAULT;
+}
+
+static int
+do_alignment_ldrstr(unsigned long addr, unsigned long instr,
+ struct pt_regs *regs)
+{
+ unsigned int rd = RD_BITS(instr);
+
+ if (!LDST_P_BIT(instr) && LDST_W_BIT(instr))
+ goto trans;
+
+ if (LDST_L_BIT(instr))
+ get32_unaligned_check(regs->uregs[rd], addr);
+ else
+ put32_unaligned_check(regs->uregs[rd], addr);
+ return TYPE_LDST;
+
+trans:
+ if (LDST_L_BIT(instr))
+ get32t_unaligned_check(regs->uregs[rd], addr);
+ else
+ put32t_unaligned_check(regs->uregs[rd], addr);
+ return TYPE_LDST;
+
+fault:
+ return TYPE_FAULT;
+}
+
+/*
+ * LDM/STM alignment handler.
+ *
+ * There are 4 variants of this instruction:
+ *
+ * B = rn pointer before instruction, A = rn pointer after instruction
+ * ------ increasing address ----->
+ * | | r0 | r1 | ... | rx | |
+ * PU = 01 B A
+ * PU = 11 B A
+ * PU = 00 A B
+ * PU = 10 A B
+ */
+static int
+do_alignment_ldmstm(unsigned long addr, unsigned long instr,
+ struct pt_regs *regs)
+{
+ unsigned int rd, rn, pc_correction, reg_correction, nr_regs, regbits;
+ unsigned long eaddr, newaddr;
+
+ if (LDM_S_BIT(instr))
+ goto bad;
+
+ pc_correction = 4; /* processor implementation defined */
+
+ /* count the number of registers in the mask to be transferred */
+ nr_regs = hweight16(REGMASK_BITS(instr)) * 4;
+
+ rn = RN_BITS(instr);
+ newaddr = eaddr = regs->uregs[rn];
+
+ if (!LDST_U_BIT(instr))
+ nr_regs = -nr_regs;
+ newaddr += nr_regs;
+ if (!LDST_U_BIT(instr))
+ eaddr = newaddr;
+
+ if (LDST_P_EQ_U(instr)) /* U = P */
+ eaddr += 4;
+
+ /*
+ * This is a "hint" - we already have eaddr worked out by the
+ * processor for us.
+ */
+ if (addr != eaddr) {
+ printk(KERN_ERR "LDMSTM: PC = %08lx, instr = %08lx, "
+ "addr = %08lx, eaddr = %08lx\n",
+ instruction_pointer(regs), instr, addr, eaddr);
+ show_regs(regs);
+ }
+
+ if (LDM_H_BIT(instr))
+ reg_correction = 0x10;
+ else
+ reg_correction = 0x00;
+
+ for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
+ regbits >>= 1, rd += 1)
+ if (regbits & 1) {
+ if (LDST_L_BIT(instr))
+ get32_unaligned_check(regs->
+ uregs[rd + reg_correction], eaddr);
+ else
+ put32_unaligned_check(regs->
+ uregs[rd + reg_correction], eaddr);
+ eaddr += 4;
+ }
+
+ if (LDST_W_BIT(instr))
+ regs->uregs[rn] = newaddr;
+ return TYPE_DONE;
+
+fault:
+ regs->UCreg_pc -= pc_correction;
+ return TYPE_FAULT;
+
+bad:
+ printk(KERN_ERR "Alignment trap: not handling ldm with s-bit set\n");
+ return TYPE_ERROR;
+}
+
+static int
+do_alignment(unsigned long addr, unsigned int error_code, struct pt_regs *regs)
+{
+ union offset_union offset;
+ unsigned long instr, instrptr;
+ int (*handler) (unsigned long addr, unsigned long instr,
+ struct pt_regs *regs);
+ unsigned int type;
+
+ instrptr = instruction_pointer(regs);
+ if (instrptr >= PAGE_OFFSET)
+ instr = *(unsigned long *)instrptr;
+ else {
+ __asm__ __volatile__(
+ "ldw.u %0, [%1]\n"
+ : "=&r"(instr)
+ : "r"(instrptr));
+ }
+
+ regs->UCreg_pc += 4;
+
+ switch (CODING_BITS(instr)) {
+ case 0x40000120: /* ldrh or strh */
+ if (LDSTH_I_BIT(instr))
+ offset.un = (instr & 0x3e00) >> 4 | (instr & 31);
+ else
+ offset.un = regs->uregs[RM_BITS(instr)];
+ handler = do_alignment_ldrhstrh;
+ break;
+
+ case 0x60000000: /* ldr or str immediate */
+ case 0x60000100: /* ldr or str immediate */
+ case 0x60000020: /* ldr or str immediate */
+ case 0x60000120: /* ldr or str immediate */
+ offset.un = OFFSET_BITS(instr);
+ handler = do_alignment_ldrstr;
+ break;
+
+ case 0x40000000: /* ldr or str register */
+ offset.un = regs->uregs[RM_BITS(instr)];
+ {
+ unsigned int shiftval = SHIFT_BITS(instr);
+
+ switch (SHIFT_TYPE(instr)) {
+ case SHIFT_LSL:
+ offset.un <<= shiftval;
+ break;
+
+ case SHIFT_LSR:
+ offset.un >>= shiftval;
+ break;
+
+ case SHIFT_ASR:
+ offset.sn >>= shiftval;
+ break;
+
+ case SHIFT_RORRRX:
+ if (shiftval == 0) {
+ offset.un >>= 1;
+ if (regs->UCreg_asr & PSR_C_BIT)
+ offset.un |= 1 << 31;
+ } else
+ offset.un = offset.un >> shiftval |
+ offset.un << (32 - shiftval);
+ break;
+ }
+ }
+ handler = do_alignment_ldrstr;
+ break;
+
+ case 0x80000000: /* ldm or stm */
+ case 0x80000020: /* ldm or stm */
+ handler = do_alignment_ldmstm;
+ break;
+
+ default:
+ goto bad;
+ }
+
+ type = handler(addr, instr, regs);
+
+ if (type == TYPE_ERROR || type == TYPE_FAULT)
+ goto bad_or_fault;
+
+ if (type == TYPE_LDST)
+ do_alignment_finish_ldst(addr, instr, regs, offset);
+
+ return 0;
+
+bad_or_fault:
+ if (type == TYPE_ERROR)
+ goto bad;
+ regs->UCreg_pc -= 4;
+ /*
+ * We got a fault - fix it up, or die.
+ */
+ do_bad_area(addr, error_code, regs);
+ return 0;
+
+bad:
+ /*
+ * Oops, we didn't handle the instruction.
+ * However, we must handle fpu instr firstly.
+ */
+#ifdef CONFIG_UNICORE_FPU_F64
+ /* handle co.load/store */
+#define CODING_COLS 0xc0000000
+#define COLS_OFFSET_BITS(i) (i & 0x1FF)
+#define COLS_L_BITS(i) (i & (1<<24))
+#define COLS_FN_BITS(i) ((i>>14) & 31)
+ if ((instr & 0xe0000000) == CODING_COLS) {
+ unsigned int fn = COLS_FN_BITS(instr);
+ unsigned long val = 0;
+ if (COLS_L_BITS(instr)) {
+ get32t_unaligned_check(val, addr);
+ switch (fn) {
+#define ASM_MTF(n) case n: \
+ __asm__ __volatile__("MTF %0, F" __stringify(n) \
+ : : "r"(val)); \
+ break;
+ ASM_MTF(0); ASM_MTF(1); ASM_MTF(2); ASM_MTF(3);
+ ASM_MTF(4); ASM_MTF(5); ASM_MTF(6); ASM_MTF(7);
+ ASM_MTF(8); ASM_MTF(9); ASM_MTF(10); ASM_MTF(11);
+ ASM_MTF(12); ASM_MTF(13); ASM_MTF(14); ASM_MTF(15);
+ ASM_MTF(16); ASM_MTF(17); ASM_MTF(18); ASM_MTF(19);
+ ASM_MTF(20); ASM_MTF(21); ASM_MTF(22); ASM_MTF(23);
+ ASM_MTF(24); ASM_MTF(25); ASM_MTF(26); ASM_MTF(27);
+ ASM_MTF(28); ASM_MTF(29); ASM_MTF(30); ASM_MTF(31);
+#undef ASM_MTF
+ }
+ } else {
+ switch (fn) {
+#define ASM_MFF(n) case n: \
+ __asm__ __volatile__("MFF %0, F" __stringify(n) \
+ : : "r"(val)); \
+ break;
+ ASM_MFF(0); ASM_MFF(1); ASM_MFF(2); ASM_MFF(3);
+ ASM_MFF(4); ASM_MFF(5); ASM_MFF(6); ASM_MFF(7);
+ ASM_MFF(8); ASM_MFF(9); ASM_MFF(10); ASM_MFF(11);
+ ASM_MFF(12); ASM_MFF(13); ASM_MFF(14); ASM_MFF(15);
+ ASM_MFF(16); ASM_MFF(17); ASM_MFF(18); ASM_MFF(19);
+ ASM_MFF(20); ASM_MFF(21); ASM_MFF(22); ASM_MFF(23);
+ ASM_MFF(24); ASM_MFF(25); ASM_MFF(26); ASM_MFF(27);
+ ASM_MFF(28); ASM_MFF(29); ASM_MFF(30); ASM_MFF(31);
+#undef ASM_MFF
+ }
+ put32t_unaligned_check(val, addr);
+ }
+ return TYPE_COLS;
+ }
+fault:
+ return TYPE_FAULT;
+#endif
+ printk(KERN_ERR "Alignment trap: not handling instruction "
+ "%08lx at [<%08lx>]\n", instr, instrptr);
+ return 1;
+}
+
+/*
+ * This needs to be done after sysctl_init, otherwise sys/ will be
+ * overwritten. Actually, this shouldn't be in sys/ at all since
+ * it isn't a sysctl, and it doesn't contain sysctl information.
+ */
+static int __init alignment_init(void)
+{
+ hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
+ "alignment exception");
+
+ return 0;
+}
+
+fs_initcall(alignment_init);
diff --git a/arch/unicore32/mm/cache-ucv2.S b/arch/unicore32/mm/cache-ucv2.S
new file mode 100644
index 00000000000..ecaa1727f90
--- /dev/null
+++ b/arch/unicore32/mm/cache-ucv2.S
@@ -0,0 +1,212 @@
+/*
+ * linux/arch/unicore32/mm/cache-ucv2.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This is the "shell" of the UniCore-v2 processor support.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/page.h>
+
+#include "proc-macros.S"
+
+/*
+ * __cpuc_flush_icache_all()
+ * __cpuc_flush_kern_all()
+ * __cpuc_flush_user_all()
+ *
+ * Flush the entire cache.
+ */
+ENTRY(__cpuc_flush_icache_all)
+ /*FALLTHROUGH*/
+ENTRY(__cpuc_flush_kern_all)
+ /*FALLTHROUGH*/
+ENTRY(__cpuc_flush_user_all)
+ mov r0, #0
+ movc p0.c5, r0, #14 @ Dcache flush all
+ nop8
+
+ mov r0, #0
+ movc p0.c5, r0, #20 @ Icache invalidate all
+ nop8
+
+ mov pc, lr
+
+/*
+ * __cpuc_flush_user_range(start, end, flags)
+ *
+ * Flush a range of TLB entries in the specified address space.
+ *
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ * - flags - vm_area_struct flags describing address space
+ */
+ENTRY(__cpuc_flush_user_range)
+ cxor.a r2, #0
+ beq __cpuc_dma_flush_range
+
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+ andn r0, r0, #CACHE_LINESIZE - 1 @ Safety check
+ sub r1, r1, r0
+ csub.a r1, #MAX_AREA_SIZE
+ bsg 2f
+
+ andn r1, r1, #CACHE_LINESIZE - 1
+ add r1, r1, #CACHE_LINESIZE
+
+101: dcacheline_flush r0, r11, r12
+
+ add r0, r0, #CACHE_LINESIZE
+ sub.a r1, r1, #CACHE_LINESIZE
+ bns 101b
+ b 3f
+#endif
+2: mov ip, #0
+ movc p0.c5, ip, #14 @ Dcache flush all
+ nop8
+
+3: mov ip, #0
+ movc p0.c5, ip, #20 @ Icache invalidate all
+ nop8
+
+ mov pc, lr
+
+/*
+ * __cpuc_coherent_kern_range(start,end)
+ * __cpuc_coherent_user_range(start,end)
+ *
+ * Ensure that the I and D caches are coherent within specified
+ * region. This is typically used when code has been written to
+ * a memory region, and will be executed.
+ *
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+ENTRY(__cpuc_coherent_kern_range)
+ /* FALLTHROUGH */
+ENTRY(__cpuc_coherent_user_range)
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+ andn r0, r0, #CACHE_LINESIZE - 1 @ Safety check
+ sub r1, r1, r0
+ csub.a r1, #MAX_AREA_SIZE
+ bsg 2f
+
+ andn r1, r1, #CACHE_LINESIZE - 1
+ add r1, r1, #CACHE_LINESIZE
+
+ @ r0 va2pa r10
+ mov r9, #PAGE_SZ
+ sub r9, r9, #1 @ PAGE_MASK
+101: va2pa r0, r10, r11, r12, r13, 2f @ r10 is PA
+ b 103f
+102: cand.a r0, r9
+ beq 101b
+
+103: movc p0.c5, r10, #11 @ Dcache clean line of R10
+ nop8
+
+ add r0, r0, #CACHE_LINESIZE
+ add r10, r10, #CACHE_LINESIZE
+ sub.a r1, r1, #CACHE_LINESIZE
+ bns 102b
+ b 3f
+#endif
+2: mov ip, #0
+ movc p0.c5, ip, #10 @ Dcache clean all
+ nop8
+
+3: mov ip, #0
+ movc p0.c5, ip, #20 @ Icache invalidate all
+ nop8
+
+ mov pc, lr
+
+/*
+ * __cpuc_flush_kern_dcache_area(void *addr, size_t size)
+ *
+ * - addr - kernel address
+ * - size - region size
+ */
+ENTRY(__cpuc_flush_kern_dcache_area)
+ mov ip, #0
+ movc p0.c5, ip, #14 @ Dcache flush all
+ nop8
+ mov pc, lr
+
+/*
+ * __cpuc_dma_clean_range(start,end)
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+ENTRY(__cpuc_dma_clean_range)
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+ andn r0, r0, #CACHE_LINESIZE - 1
+ sub r1, r1, r0
+ andn r1, r1, #CACHE_LINESIZE - 1
+ add r1, r1, #CACHE_LINESIZE
+
+ csub.a r1, #MAX_AREA_SIZE
+ bsg 2f
+
+ @ r0 va2pa r10
+ mov r9, #PAGE_SZ
+ sub r9, r9, #1 @ PAGE_MASK
+101: va2pa r0, r10, r11, r12, r13, 2f @ r10 is PA
+ b 1f
+102: cand.a r0, r9
+ beq 101b
+
+1: movc p0.c5, r10, #11 @ Dcache clean line of R10
+ nop8
+ add r0, r0, #CACHE_LINESIZE
+ add r10, r10, #CACHE_LINESIZE
+ sub.a r1, r1, #CACHE_LINESIZE
+ bns 102b
+ mov pc, lr
+#endif
+2: mov ip, #0
+ movc p0.c5, ip, #10 @ Dcache clean all
+ nop8
+
+ mov pc, lr
+
+/*
+ * __cpuc_dma_inv_range(start,end)
+ * __cpuc_dma_flush_range(start,end)
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+__cpuc_dma_inv_range:
+ /* FALLTHROUGH */
+ENTRY(__cpuc_dma_flush_range)
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+ andn r0, r0, #CACHE_LINESIZE - 1
+ sub r1, r1, r0
+ andn r1, r1, #CACHE_LINESIZE - 1
+ add r1, r1, #CACHE_LINESIZE
+
+ csub.a r1, #MAX_AREA_SIZE
+ bsg 2f
+
+ @ r0 va2pa r10
+101: dcacheline_flush r0, r11, r12
+
+ add r0, r0, #CACHE_LINESIZE
+ sub.a r1, r1, #CACHE_LINESIZE
+ bns 101b
+ mov pc, lr
+#endif
+2: mov ip, #0
+ movc p0.c5, ip, #14 @ Dcache flush all
+ nop8
+
+ mov pc, lr
+
diff --git a/arch/unicore32/mm/dma-swiotlb.c b/arch/unicore32/mm/dma-swiotlb.c
new file mode 100644
index 00000000000..bfa9fbb2bbb
--- /dev/null
+++ b/arch/unicore32/mm/dma-swiotlb.c
@@ -0,0 +1,34 @@
+/*
+ * Contains routines needed to support swiotlb for UniCore32.
+ *
+ * Copyright (C) 2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/pci.h>
+#include <linux/cache.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/swiotlb.h>
+#include <linux/bootmem.h>
+
+#include <asm/dma.h>
+
+struct dma_map_ops swiotlb_dma_map_ops = {
+ .alloc_coherent = swiotlb_alloc_coherent,
+ .free_coherent = swiotlb_free_coherent,
+ .map_sg = swiotlb_map_sg_attrs,
+ .unmap_sg = swiotlb_unmap_sg_attrs,
+ .dma_supported = swiotlb_dma_supported,
+ .map_page = swiotlb_map_page,
+ .unmap_page = swiotlb_unmap_page,
+ .sync_single_for_cpu = swiotlb_sync_single_for_cpu,
+ .sync_single_for_device = swiotlb_sync_single_for_device,
+ .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+ .sync_sg_for_device = swiotlb_sync_sg_for_device,
+ .mapping_error = swiotlb_dma_mapping_error,
+};
+EXPORT_SYMBOL(swiotlb_dma_map_ops);
diff --git a/arch/unicore32/mm/extable.c b/arch/unicore32/mm/extable.c
new file mode 100644
index 00000000000..6564180eb28
--- /dev/null
+++ b/arch/unicore32/mm/extable.c
@@ -0,0 +1,24 @@
+/*
+ * linux/arch/unicore32/mm/extable.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+ const struct exception_table_entry *fixup;
+
+ fixup = search_exception_tables(instruction_pointer(regs));
+ if (fixup)
+ regs->UCreg_pc = fixup->fixup;
+
+ return fixup != NULL;
+}
diff --git a/arch/unicore32/mm/fault.c b/arch/unicore32/mm/fault.c
new file mode 100644
index 00000000000..283aa4b50b7
--- /dev/null
+++ b/arch/unicore32/mm/fault.c
@@ -0,0 +1,479 @@
+/*
+ * linux/arch/unicore32/mm/fault.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/mm.h>
+#include <linux/hardirq.h>
+#include <linux/init.h>
+#include <linux/kprobes.h>
+#include <linux/uaccess.h>
+#include <linux/page-flags.h>
+#include <linux/sched.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+/*
+ * Fault status register encodings. We steal bit 31 for our own purposes.
+ */
+#define FSR_LNX_PF (1 << 31)
+
+static inline int fsr_fs(unsigned int fsr)
+{
+ /* xyabcde will be abcde+xy */
+ return (fsr & 31) + ((fsr & (3 << 5)) >> 5);
+}
+
+/*
+ * This is useful to dump out the page tables associated with
+ * 'addr' in mm 'mm'.
+ */
+void show_pte(struct mm_struct *mm, unsigned long addr)
+{
+ pgd_t *pgd;
+
+ if (!mm)
+ mm = &init_mm;
+
+ printk(KERN_ALERT "pgd = %p\n", mm->pgd);
+ pgd = pgd_offset(mm, addr);
+ printk(KERN_ALERT "[%08lx] *pgd=%08lx", addr, pgd_val(*pgd));
+
+ do {
+ pmd_t *pmd;
+ pte_t *pte;
+
+ if (pgd_none(*pgd))
+ break;
+
+ if (pgd_bad(*pgd)) {
+ printk("(bad)");
+ break;
+ }
+
+ pmd = pmd_offset((pud_t *) pgd, addr);
+ if (PTRS_PER_PMD != 1)
+ printk(", *pmd=%08lx", pmd_val(*pmd));
+
+ if (pmd_none(*pmd))
+ break;
+
+ if (pmd_bad(*pmd)) {
+ printk("(bad)");
+ break;
+ }
+
+ /* We must not map this if we have highmem enabled */
+ if (PageHighMem(pfn_to_page(pmd_val(*pmd) >> PAGE_SHIFT)))
+ break;
+
+ pte = pte_offset_map(pmd, addr);
+ printk(", *pte=%08lx", pte_val(*pte));
+ pte_unmap(pte);
+ } while (0);
+
+ printk("\n");
+}
+
+/*
+ * Oops. The kernel tried to access some page that wasn't present.
+ */
+static void __do_kernel_fault(struct mm_struct *mm, unsigned long addr,
+ unsigned int fsr, struct pt_regs *regs)
+{
+ /*
+ * Are we prepared to handle this kernel fault?
+ */
+ if (fixup_exception(regs))
+ return;
+
+ /*
+ * No handler, we'll have to terminate things with extreme prejudice.
+ */
+ bust_spinlocks(1);
+ printk(KERN_ALERT
+ "Unable to handle kernel %s at virtual address %08lx\n",
+ (addr < PAGE_SIZE) ? "NULL pointer dereference" :
+ "paging request", addr);
+
+ show_pte(mm, addr);
+ die("Oops", regs, fsr);
+ bust_spinlocks(0);
+ do_exit(SIGKILL);
+}
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * User mode accesses just cause a SIGSEGV
+ */
+static void __do_user_fault(struct task_struct *tsk, unsigned long addr,
+ unsigned int fsr, unsigned int sig, int code,
+ struct pt_regs *regs)
+{
+ struct siginfo si;
+
+ tsk->thread.address = addr;
+ tsk->thread.error_code = fsr;
+ tsk->thread.trap_no = 14;
+ si.si_signo = sig;
+ si.si_errno = 0;
+ si.si_code = code;
+ si.si_addr = (void __user *)addr;
+ force_sig_info(sig, &si, tsk);
+}
+
+void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ struct task_struct *tsk = current;
+ struct mm_struct *mm = tsk->active_mm;
+
+ /*
+ * If we are in kernel mode at this point, we
+ * have no context to handle this fault with.
+ */
+ if (user_mode(regs))
+ __do_user_fault(tsk, addr, fsr, SIGSEGV, SEGV_MAPERR, regs);
+ else
+ __do_kernel_fault(mm, addr, fsr, regs);
+}
+
+#define VM_FAULT_BADMAP 0x010000
+#define VM_FAULT_BADACCESS 0x020000
+
+/*
+ * Check that the permissions on the VMA allow for the fault which occurred.
+ * If we encountered a write fault, we must have write permission, otherwise
+ * we allow any permission.
+ */
+static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
+{
+ unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
+
+ if (!(fsr ^ 0x12)) /* write? */
+ mask = VM_WRITE;
+ if (fsr & FSR_LNX_PF)
+ mask = VM_EXEC;
+
+ return vma->vm_flags & mask ? false : true;
+}
+
+static int __do_pf(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
+ struct task_struct *tsk)
+{
+ struct vm_area_struct *vma;
+ int fault;
+
+ vma = find_vma(mm, addr);
+ fault = VM_FAULT_BADMAP;
+ if (unlikely(!vma))
+ goto out;
+ if (unlikely(vma->vm_start > addr))
+ goto check_stack;
+
+ /*
+ * Ok, we have a good vm_area for this
+ * memory access, so we can handle it.
+ */
+good_area:
+ if (access_error(fsr, vma)) {
+ fault = VM_FAULT_BADACCESS;
+ goto out;
+ }
+
+ /*
+ * If for any reason at all we couldn't handle the fault, make
+ * sure we exit gracefully rather than endlessly redo the fault.
+ */
+ fault = handle_mm_fault(mm, vma, addr & PAGE_MASK,
+ (!(fsr ^ 0x12)) ? FAULT_FLAG_WRITE : 0);
+ if (unlikely(fault & VM_FAULT_ERROR))
+ return fault;
+ if (fault & VM_FAULT_MAJOR)
+ tsk->maj_flt++;
+ else
+ tsk->min_flt++;
+ return fault;
+
+check_stack:
+ if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
+ goto good_area;
+out:
+ return fault;
+}
+
+static int do_pf(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ int fault, sig, code;
+
+ tsk = current;
+ mm = tsk->mm;
+
+ /*
+ * If we're in an interrupt or have no user
+ * context, we must not take the fault..
+ */
+ if (in_atomic() || !mm)
+ goto no_context;
+
+ /*
+ * As per x86, we may deadlock here. However, since the kernel only
+ * validly references user space from well defined areas of the code,
+ * we can bug out early if this is from code which shouldn't.
+ */
+ if (!down_read_trylock(&mm->mmap_sem)) {
+ if (!user_mode(regs)
+ && !search_exception_tables(regs->UCreg_pc))
+ goto no_context;
+ down_read(&mm->mmap_sem);
+ } else {
+ /*
+ * The above down_read_trylock() might have succeeded in
+ * which case, we'll have missed the might_sleep() from
+ * down_read()
+ */
+ might_sleep();
+#ifdef CONFIG_DEBUG_VM
+ if (!user_mode(regs) &&
+ !search_exception_tables(regs->UCreg_pc))
+ goto no_context;
+#endif
+ }
+
+ fault = __do_pf(mm, addr, fsr, tsk);
+ up_read(&mm->mmap_sem);
+
+ /*
+ * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
+ */
+ if (likely(!(fault &
+ (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
+ return 0;
+
+ if (fault & VM_FAULT_OOM) {
+ /*
+ * We ran out of memory, call the OOM killer, and return to
+ * userspace (which will retry the fault, or kill us if we
+ * got oom-killed)
+ */
+ pagefault_out_of_memory();
+ return 0;
+ }
+
+ /*
+ * If we are in kernel mode at this point, we
+ * have no context to handle this fault with.
+ */
+ if (!user_mode(regs))
+ goto no_context;
+
+ if (fault & VM_FAULT_SIGBUS) {
+ /*
+ * We had some memory, but were unable to
+ * successfully fix up this page fault.
+ */
+ sig = SIGBUS;
+ code = BUS_ADRERR;
+ } else {
+ /*
+ * Something tried to access memory that
+ * isn't in our memory map..
+ */
+ sig = SIGSEGV;
+ code = fault == VM_FAULT_BADACCESS ? SEGV_ACCERR : SEGV_MAPERR;
+ }
+
+ __do_user_fault(tsk, addr, fsr, sig, code, regs);
+ return 0;
+
+no_context:
+ __do_kernel_fault(mm, addr, fsr, regs);
+ return 0;
+}
+
+/*
+ * First Level Translation Fault Handler
+ *
+ * We enter here because the first level page table doesn't contain
+ * a valid entry for the address.
+ *
+ * If the address is in kernel space (>= TASK_SIZE), then we are
+ * probably faulting in the vmalloc() area.
+ *
+ * If the init_task's first level page tables contains the relevant
+ * entry, we copy the it to this task. If not, we send the process
+ * a signal, fixup the exception, or oops the kernel.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may be in an
+ * interrupt or a critical region, and should only copy the information
+ * from the master page table, nothing more.
+ */
+static int do_ifault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ unsigned int index;
+ pgd_t *pgd, *pgd_k;
+ pmd_t *pmd, *pmd_k;
+
+ if (addr < TASK_SIZE)
+ return do_pf(addr, fsr, regs);
+
+ if (user_mode(regs))
+ goto bad_area;
+
+ index = pgd_index(addr);
+
+ pgd = cpu_get_pgd() + index;
+ pgd_k = init_mm.pgd + index;
+
+ if (pgd_none(*pgd_k))
+ goto bad_area;
+
+ pmd_k = pmd_offset((pud_t *) pgd_k, addr);
+ pmd = pmd_offset((pud_t *) pgd, addr);
+
+ if (pmd_none(*pmd_k))
+ goto bad_area;
+
+ set_pmd(pmd, *pmd_k);
+ flush_pmd_entry(pmd);
+ return 0;
+
+bad_area:
+ do_bad_area(addr, fsr, regs);
+ return 0;
+}
+
+/*
+ * This abort handler always returns "fault".
+ */
+static int do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ return 1;
+}
+
+static int do_good(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ unsigned int res1, res2;
+
+ printk("dabt exception but no error!\n");
+
+ __asm__ __volatile__(
+ "mff %0,f0\n"
+ "mff %1,f1\n"
+ : "=r"(res1), "=r"(res2)
+ :
+ : "memory");
+
+ printk(KERN_EMERG "r0 :%08x r1 :%08x\n", res1, res2);
+ panic("shut up\n");
+ return 0;
+}
+
+static struct fsr_info {
+ int (*fn) (unsigned long addr, unsigned int fsr, struct pt_regs *regs);
+ int sig;
+ int code;
+ const char *name;
+} fsr_info[] = {
+ /*
+ * The following are the standard Unicore-I and UniCore-II aborts.
+ */
+ { do_good, SIGBUS, 0, "no error" },
+ { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" },
+ { do_bad, SIGBUS, BUS_OBJERR, "external exception" },
+ { do_bad, SIGBUS, 0, "burst operation" },
+ { do_bad, SIGBUS, 0, "unknown 00100" },
+ { do_ifault, SIGSEGV, SEGV_MAPERR, "2nd level pt non-exist"},
+ { do_bad, SIGBUS, 0, "2nd lvl large pt non-exist" },
+ { do_bad, SIGBUS, 0, "invalid pte" },
+ { do_pf, SIGSEGV, SEGV_MAPERR, "page miss" },
+ { do_bad, SIGBUS, 0, "middle page miss" },
+ { do_bad, SIGBUS, 0, "large page miss" },
+ { do_pf, SIGSEGV, SEGV_MAPERR, "super page (section) miss" },
+ { do_bad, SIGBUS, 0, "unknown 01100" },
+ { do_bad, SIGBUS, 0, "unknown 01101" },
+ { do_bad, SIGBUS, 0, "unknown 01110" },
+ { do_bad, SIGBUS, 0, "unknown 01111" },
+ { do_bad, SIGBUS, 0, "addr: up 3G or IO" },
+ { do_pf, SIGSEGV, SEGV_ACCERR, "read unreadable addr" },
+ { do_pf, SIGSEGV, SEGV_ACCERR, "write unwriteable addr"},
+ { do_pf, SIGSEGV, SEGV_ACCERR, "exec unexecutable addr"},
+ { do_bad, SIGBUS, 0, "unknown 10100" },
+ { do_bad, SIGBUS, 0, "unknown 10101" },
+ { do_bad, SIGBUS, 0, "unknown 10110" },
+ { do_bad, SIGBUS, 0, "unknown 10111" },
+ { do_bad, SIGBUS, 0, "unknown 11000" },
+ { do_bad, SIGBUS, 0, "unknown 11001" },
+ { do_bad, SIGBUS, 0, "unknown 11010" },
+ { do_bad, SIGBUS, 0, "unknown 11011" },
+ { do_bad, SIGBUS, 0, "unknown 11100" },
+ { do_bad, SIGBUS, 0, "unknown 11101" },
+ { do_bad, SIGBUS, 0, "unknown 11110" },
+ { do_bad, SIGBUS, 0, "unknown 11111" }
+};
+
+void __init hook_fault_code(int nr,
+ int (*fn) (unsigned long, unsigned int, struct pt_regs *),
+ int sig, int code, const char *name)
+{
+ if (nr < 0 || nr >= ARRAY_SIZE(fsr_info))
+ BUG();
+
+ fsr_info[nr].fn = fn;
+ fsr_info[nr].sig = sig;
+ fsr_info[nr].code = code;
+ fsr_info[nr].name = name;
+}
+
+/*
+ * Dispatch a data abort to the relevant handler.
+ */
+asmlinkage void do_DataAbort(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
+{
+ const struct fsr_info *inf = fsr_info + fsr_fs(fsr);
+ struct siginfo info;
+
+ if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs))
+ return;
+
+ printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n",
+ inf->name, fsr, addr);
+
+ info.si_signo = inf->sig;
+ info.si_errno = 0;
+ info.si_code = inf->code;
+ info.si_addr = (void __user *)addr;
+ uc32_notify_die("", regs, &info, fsr, 0);
+}
+
+asmlinkage void do_PrefetchAbort(unsigned long addr,
+ unsigned int ifsr, struct pt_regs *regs)
+{
+ const struct fsr_info *inf = fsr_info + fsr_fs(ifsr);
+ struct siginfo info;
+
+ if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
+ return;
+
+ printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
+ inf->name, ifsr, addr);
+
+ info.si_signo = inf->sig;
+ info.si_errno = 0;
+ info.si_code = inf->code;
+ info.si_addr = (void __user *)addr;
+ uc32_notify_die("", regs, &info, ifsr, 0);
+}
diff --git a/arch/unicore32/mm/flush.c b/arch/unicore32/mm/flush.c
new file mode 100644
index 00000000000..93478cc8b26
--- /dev/null
+++ b/arch/unicore32/mm/flush.c
@@ -0,0 +1,98 @@
+/*
+ * linux/arch/unicore32/mm/flush.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+
+#include <asm/cacheflush.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+
+void flush_cache_mm(struct mm_struct *mm)
+{
+}
+
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end)
+{
+ if (vma->vm_flags & VM_EXEC)
+ __flush_icache_all();
+}
+
+void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr,
+ unsigned long pfn)
+{
+}
+
+static void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+ unsigned long uaddr, void *kaddr, unsigned long len)
+{
+ /* VIPT non-aliasing D-cache */
+ if (vma->vm_flags & VM_EXEC) {
+ unsigned long addr = (unsigned long)kaddr;
+
+ __cpuc_coherent_kern_range(addr, addr + len);
+ }
+}
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space. Really, we want to allow our "user
+ * space" model to handle this.
+ *
+ * Note that this code needs to run on the current CPU.
+ */
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long uaddr, void *dst, const void *src,
+ unsigned long len)
+{
+ memcpy(dst, src, len);
+ flush_ptrace_access(vma, page, uaddr, dst, len);
+}
+
+void __flush_dcache_page(struct address_space *mapping, struct page *page)
+{
+ /*
+ * Writeback any data associated with the kernel mapping of this
+ * page. This ensures that data in the physical page is mutually
+ * coherent with the kernels mapping.
+ */
+ __cpuc_flush_kern_dcache_area(page_address(page), PAGE_SIZE);
+}
+
+/*
+ * Ensure cache coherency between kernel mapping and userspace mapping
+ * of this page.
+ */
+void flush_dcache_page(struct page *page)
+{
+ struct address_space *mapping;
+
+ /*
+ * The zero page is never written to, so never has any dirty
+ * cache lines, and therefore never needs to be flushed.
+ */
+ if (page == ZERO_PAGE(0))
+ return;
+
+ mapping = page_mapping(page);
+
+ if (mapping && !mapping_mapped(mapping))
+ clear_bit(PG_dcache_clean, &page->flags);
+ else {
+ __flush_dcache_page(mapping, page);
+ if (mapping)
+ __flush_icache_all();
+ set_bit(PG_dcache_clean, &page->flags);
+ }
+}
+EXPORT_SYMBOL(flush_dcache_page);
diff --git a/arch/unicore32/mm/init.c b/arch/unicore32/mm/init.c
new file mode 100644
index 00000000000..3dbe3709b69
--- /dev/null
+++ b/arch/unicore32/mm/init.c
@@ -0,0 +1,517 @@
+/*
+ * linux/arch/unicore32/mm/init.c
+ *
+ * Copyright (C) 2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/swap.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mman.h>
+#include <linux/nodemask.h>
+#include <linux/initrd.h>
+#include <linux/highmem.h>
+#include <linux/gfp.h>
+#include <linux/memblock.h>
+#include <linux/sort.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/sizes.h>
+#include <asm/tlb.h>
+#include <mach/map.h>
+
+#include "mm.h"
+
+static unsigned long phys_initrd_start __initdata = 0x01000000;
+static unsigned long phys_initrd_size __initdata = SZ_8M;
+
+static int __init early_initrd(char *p)
+{
+ unsigned long start, size;
+ char *endp;
+
+ start = memparse(p, &endp);
+ if (*endp == ',') {
+ size = memparse(endp + 1, NULL);
+
+ phys_initrd_start = start;
+ phys_initrd_size = size;
+ }
+ return 0;
+}
+early_param("initrd", early_initrd);
+
+/*
+ * This keeps memory configuration data used by a couple memory
+ * initialization functions, as well as show_mem() for the skipping
+ * of holes in the memory map. It is populated by uc32_add_memory().
+ */
+struct meminfo meminfo;
+
+void show_mem(void)
+{
+ int free = 0, total = 0, reserved = 0;
+ int shared = 0, cached = 0, slab = 0, i;
+ struct meminfo *mi = &meminfo;
+
+ printk(KERN_DEFAULT "Mem-info:\n");
+ show_free_areas();
+
+ for_each_bank(i, mi) {
+ struct membank *bank = &mi->bank[i];
+ unsigned int pfn1, pfn2;
+ struct page *page, *end;
+
+ pfn1 = bank_pfn_start(bank);
+ pfn2 = bank_pfn_end(bank);
+
+ page = pfn_to_page(pfn1);
+ end = pfn_to_page(pfn2 - 1) + 1;
+
+ do {
+ total++;
+ if (PageReserved(page))
+ reserved++;
+ else if (PageSwapCache(page))
+ cached++;
+ else if (PageSlab(page))
+ slab++;
+ else if (!page_count(page))
+ free++;
+ else
+ shared += page_count(page) - 1;
+ page++;
+ } while (page < end);
+ }
+
+ printk(KERN_DEFAULT "%d pages of RAM\n", total);
+ printk(KERN_DEFAULT "%d free pages\n", free);
+ printk(KERN_DEFAULT "%d reserved pages\n", reserved);
+ printk(KERN_DEFAULT "%d slab pages\n", slab);
+ printk(KERN_DEFAULT "%d pages shared\n", shared);
+ printk(KERN_DEFAULT "%d pages swap cached\n", cached);
+}
+
+static void __init find_limits(unsigned long *min, unsigned long *max_low,
+ unsigned long *max_high)
+{
+ struct meminfo *mi = &meminfo;
+ int i;
+
+ *min = -1UL;
+ *max_low = *max_high = 0;
+
+ for_each_bank(i, mi) {
+ struct membank *bank = &mi->bank[i];
+ unsigned long start, end;
+
+ start = bank_pfn_start(bank);
+ end = bank_pfn_end(bank);
+
+ if (*min > start)
+ *min = start;
+ if (*max_high < end)
+ *max_high = end;
+ if (bank->highmem)
+ continue;
+ if (*max_low < end)
+ *max_low = end;
+ }
+}
+
+static void __init uc32_bootmem_init(unsigned long start_pfn,
+ unsigned long end_pfn)
+{
+ struct memblock_region *reg;
+ unsigned int boot_pages;
+ phys_addr_t bitmap;
+ pg_data_t *pgdat;
+
+ /*
+ * Allocate the bootmem bitmap page. This must be in a region
+ * of memory which has already been mapped.
+ */
+ boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
+ bitmap = memblock_alloc_base(boot_pages << PAGE_SHIFT, L1_CACHE_BYTES,
+ __pfn_to_phys(end_pfn));
+
+ /*
+ * Initialise the bootmem allocator, handing the
+ * memory banks over to bootmem.
+ */
+ node_set_online(0);
+ pgdat = NODE_DATA(0);
+ init_bootmem_node(pgdat, __phys_to_pfn(bitmap), start_pfn, end_pfn);
+
+ /* Free the lowmem regions from memblock into bootmem. */
+ for_each_memblock(memory, reg) {
+ unsigned long start = memblock_region_memory_base_pfn(reg);
+ unsigned long end = memblock_region_memory_end_pfn(reg);
+
+ if (end >= end_pfn)
+ end = end_pfn;
+ if (start >= end)
+ break;
+
+ free_bootmem(__pfn_to_phys(start), (end - start) << PAGE_SHIFT);
+ }
+
+ /* Reserve the lowmem memblock reserved regions in bootmem. */
+ for_each_memblock(reserved, reg) {
+ unsigned long start = memblock_region_reserved_base_pfn(reg);
+ unsigned long end = memblock_region_reserved_end_pfn(reg);
+
+ if (end >= end_pfn)
+ end = end_pfn;
+ if (start >= end)
+ break;
+
+ reserve_bootmem(__pfn_to_phys(start),
+ (end - start) << PAGE_SHIFT, BOOTMEM_DEFAULT);
+ }
+}
+
+static void __init uc32_bootmem_free(unsigned long min, unsigned long max_low,
+ unsigned long max_high)
+{
+ unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
+ struct memblock_region *reg;
+
+ /*
+ * initialise the zones.
+ */
+ memset(zone_size, 0, sizeof(zone_size));
+
+ /*
+ * The memory size has already been determined. If we need
+ * to do anything fancy with the allocation of this memory
+ * to the zones, now is the time to do it.
+ */
+ zone_size[0] = max_low - min;
+
+ /*
+ * Calculate the size of the holes.
+ * holes = node_size - sum(bank_sizes)
+ */
+ memcpy(zhole_size, zone_size, sizeof(zhole_size));
+ for_each_memblock(memory, reg) {
+ unsigned long start = memblock_region_memory_base_pfn(reg);
+ unsigned long end = memblock_region_memory_end_pfn(reg);
+
+ if (start < max_low) {
+ unsigned long low_end = min(end, max_low);
+ zhole_size[0] -= low_end - start;
+ }
+ }
+
+ /*
+ * Adjust the sizes according to any special requirements for
+ * this machine type.
+ */
+ arch_adjust_zones(zone_size, zhole_size);
+
+ free_area_init_node(0, zone_size, min, zhole_size);
+}
+
+int pfn_valid(unsigned long pfn)
+{
+ return memblock_is_memory(pfn << PAGE_SHIFT);
+}
+EXPORT_SYMBOL(pfn_valid);
+
+static void uc32_memory_present(void)
+{
+}
+
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+ const struct membank *a = _a, *b = _b;
+ long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+ return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
+
+void __init uc32_memblock_init(struct meminfo *mi)
+{
+ int i;
+
+ sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]),
+ meminfo_cmp, NULL);
+
+ memblock_init();
+ for (i = 0; i < mi->nr_banks; i++)
+ memblock_add(mi->bank[i].start, mi->bank[i].size);
+
+ /* Register the kernel text, kernel data and initrd with memblock. */
+ memblock_reserve(__pa(_text), _end - _text);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (phys_initrd_size) {
+ memblock_reserve(phys_initrd_start, phys_initrd_size);
+
+ /* Now convert initrd to virtual addresses */
+ initrd_start = __phys_to_virt(phys_initrd_start);
+ initrd_end = initrd_start + phys_initrd_size;
+ }
+#endif
+
+ uc32_mm_memblock_reserve();
+
+ memblock_analyze();
+ memblock_dump_all();
+}
+
+void __init bootmem_init(void)
+{
+ unsigned long min, max_low, max_high;
+
+ max_low = max_high = 0;
+
+ find_limits(&min, &max_low, &max_high);
+
+ uc32_bootmem_init(min, max_low);
+
+#ifdef CONFIG_SWIOTLB
+ swiotlb_init(1);
+#endif
+ /*
+ * Sparsemem tries to allocate bootmem in memory_present(),
+ * so must be done after the fixed reservations
+ */
+ uc32_memory_present();
+
+ /*
+ * sparse_init() needs the bootmem allocator up and running.
+ */
+ sparse_init();
+
+ /*
+ * Now free the memory - free_area_init_node needs
+ * the sparse mem_map arrays initialized by sparse_init()
+ * for memmap_init_zone(), otherwise all PFNs are invalid.
+ */
+ uc32_bootmem_free(min, max_low, max_high);
+
+ high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
+
+ /*
+ * This doesn't seem to be used by the Linux memory manager any
+ * more, but is used by ll_rw_block. If we can get rid of it, we
+ * also get rid of some of the stuff above as well.
+ *
+ * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
+ * the system, not the maximum PFN.
+ */
+ max_low_pfn = max_low - PHYS_PFN_OFFSET;
+ max_pfn = max_high - PHYS_PFN_OFFSET;
+}
+
+static inline int free_area(unsigned long pfn, unsigned long end, char *s)
+{
+ unsigned int pages = 0, size = (end - pfn) << (PAGE_SHIFT - 10);
+
+ for (; pfn < end; pfn++) {
+ struct page *page = pfn_to_page(pfn);
+ ClearPageReserved(page);
+ init_page_count(page);
+ __free_page(page);
+ pages++;
+ }
+
+ if (size && s)
+ printk(KERN_INFO "Freeing %s memory: %dK\n", s, size);
+
+ return pages;
+}
+
+static inline void
+free_memmap(unsigned long start_pfn, unsigned long end_pfn)
+{
+ struct page *start_pg, *end_pg;
+ unsigned long pg, pgend;
+
+ /*
+ * Convert start_pfn/end_pfn to a struct page pointer.
+ */
+ start_pg = pfn_to_page(start_pfn - 1) + 1;
+ end_pg = pfn_to_page(end_pfn);
+
+ /*
+ * Convert to physical addresses, and
+ * round start upwards and end downwards.
+ */
+ pg = PAGE_ALIGN(__pa(start_pg));
+ pgend = __pa(end_pg) & PAGE_MASK;
+
+ /*
+ * If there are free pages between these,
+ * free the section of the memmap array.
+ */
+ if (pg < pgend)
+ free_bootmem(pg, pgend - pg);
+}
+
+/*
+ * The mem_map array can get very big. Free the unused area of the memory map.
+ */
+static void __init free_unused_memmap(struct meminfo *mi)
+{
+ unsigned long bank_start, prev_bank_end = 0;
+ unsigned int i;
+
+ /*
+ * This relies on each bank being in address order.
+ * The banks are sorted previously in bootmem_init().
+ */
+ for_each_bank(i, mi) {
+ struct membank *bank = &mi->bank[i];
+
+ bank_start = bank_pfn_start(bank);
+
+ /*
+ * If we had a previous bank, and there is a space
+ * between the current bank and the previous, free it.
+ */
+ if (prev_bank_end && prev_bank_end < bank_start)
+ free_memmap(prev_bank_end, bank_start);
+
+ /*
+ * Align up here since the VM subsystem insists that the
+ * memmap entries are valid from the bank end aligned to
+ * MAX_ORDER_NR_PAGES.
+ */
+ prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
+ }
+}
+
+/*
+ * mem_init() marks the free areas in the mem_map and tells us how much
+ * memory is free. This is done after various parts of the system have
+ * claimed their memory after the kernel image.
+ */
+void __init mem_init(void)
+{
+ unsigned long reserved_pages, free_pages;
+ struct memblock_region *reg;
+ int i;
+
+ max_mapnr = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
+
+ /* this will put all unused low memory onto the freelists */
+ free_unused_memmap(&meminfo);
+
+ totalram_pages += free_all_bootmem();
+
+ reserved_pages = free_pages = 0;
+
+ for_each_bank(i, &meminfo) {
+ struct membank *bank = &meminfo.bank[i];
+ unsigned int pfn1, pfn2;
+ struct page *page, *end;
+
+ pfn1 = bank_pfn_start(bank);
+ pfn2 = bank_pfn_end(bank);
+
+ page = pfn_to_page(pfn1);
+ end = pfn_to_page(pfn2 - 1) + 1;
+
+ do {
+ if (PageReserved(page))
+ reserved_pages++;
+ else if (!page_count(page))
+ free_pages++;
+ page++;
+ } while (page < end);
+ }
+
+ /*
+ * Since our memory may not be contiguous, calculate the
+ * real number of pages we have in this system
+ */
+ printk(KERN_INFO "Memory:");
+ num_physpages = 0;
+ for_each_memblock(memory, reg) {
+ unsigned long pages = memblock_region_memory_end_pfn(reg) -
+ memblock_region_memory_base_pfn(reg);
+ num_physpages += pages;
+ printk(" %ldMB", pages >> (20 - PAGE_SHIFT));
+ }
+ printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
+
+ printk(KERN_NOTICE "Memory: %luk/%luk available, %luk reserved, %luK highmem\n",
+ nr_free_pages() << (PAGE_SHIFT-10),
+ free_pages << (PAGE_SHIFT-10),
+ reserved_pages << (PAGE_SHIFT-10),
+ totalhigh_pages << (PAGE_SHIFT-10));
+
+ printk(KERN_NOTICE "Virtual kernel memory layout:\n"
+ " vector : 0x%08lx - 0x%08lx (%4ld kB)\n"
+ " vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n"
+ " lowmem : 0x%08lx - 0x%08lx (%4ld MB)\n"
+ " modules : 0x%08lx - 0x%08lx (%4ld MB)\n"
+ " .init : 0x%p" " - 0x%p" " (%4d kB)\n"
+ " .text : 0x%p" " - 0x%p" " (%4d kB)\n"
+ " .data : 0x%p" " - 0x%p" " (%4d kB)\n",
+
+ VECTORS_BASE, VECTORS_BASE + PAGE_SIZE,
+ DIV_ROUND_UP(PAGE_SIZE, SZ_1K),
+ VMALLOC_START, VMALLOC_END,
+ DIV_ROUND_UP((VMALLOC_END - VMALLOC_START), SZ_1M),
+ PAGE_OFFSET, (unsigned long)high_memory,
+ DIV_ROUND_UP(((unsigned long)high_memory - PAGE_OFFSET), SZ_1M),
+ MODULES_VADDR, MODULES_END,
+ DIV_ROUND_UP((MODULES_END - MODULES_VADDR), SZ_1M),
+
+ __init_begin, __init_end,
+ DIV_ROUND_UP((__init_end - __init_begin), SZ_1K),
+ _stext, _etext,
+ DIV_ROUND_UP((_etext - _stext), SZ_1K),
+ _sdata, _edata,
+ DIV_ROUND_UP((_edata - _sdata), SZ_1K));
+
+ BUILD_BUG_ON(TASK_SIZE > MODULES_VADDR);
+ BUG_ON(TASK_SIZE > MODULES_VADDR);
+
+ if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
+ /*
+ * On a machine this small we won't get
+ * anywhere without overcommit, so turn
+ * it on by default.
+ */
+ sysctl_overcommit_memory = OVERCOMMIT_ALWAYS;
+ }
+}
+
+void free_initmem(void)
+{
+ totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)),
+ __phys_to_pfn(__pa(__init_end)),
+ "init");
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+
+static int keep_initrd;
+
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ if (!keep_initrd)
+ totalram_pages += free_area(__phys_to_pfn(__pa(start)),
+ __phys_to_pfn(__pa(end)),
+ "initrd");
+}
+
+static int __init keepinitrd_setup(char *__unused)
+{
+ keep_initrd = 1;
+ return 1;
+}
+
+__setup("keepinitrd", keepinitrd_setup);
+#endif
diff --git a/arch/unicore32/mm/ioremap.c b/arch/unicore32/mm/ioremap.c
new file mode 100644
index 00000000000..b7a605597b0
--- /dev/null
+++ b/arch/unicore32/mm/ioremap.c
@@ -0,0 +1,261 @@
+/*
+ * linux/arch/unicore32/mm/ioremap.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * Re-map IO memory to kernel address space so that we can access it.
+ *
+ * This allows a driver to remap an arbitrary region of bus memory into
+ * virtual space. One should *only* use readl, writel, memcpy_toio and
+ * so on with such remapped areas.
+ *
+ * Because UniCore only has a 32-bit address space we can't address the
+ * whole of the (physical) PCI space at once. PCI huge-mode addressing
+ * allows us to circumvent this restriction by splitting PCI space into
+ * two 2GB chunks and mapping only one at a time into processor memory.
+ * We use MMU protection domains to trap any attempt to access the bank
+ * that is not currently mapped. (This isn't fully implemented yet.)
+ */
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+#include <asm/cacheflush.h>
+#include <asm/mmu_context.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/sizes.h>
+
+#include <mach/map.h>
+#include "mm.h"
+
+/*
+ * Used by ioremap() and iounmap() code to mark (super)section-mapped
+ * I/O regions in vm_struct->flags field.
+ */
+#define VM_UNICORE_SECTION_MAPPING 0x80000000
+
+int ioremap_page(unsigned long virt, unsigned long phys,
+ const struct mem_type *mtype)
+{
+ return ioremap_page_range(virt, virt + PAGE_SIZE, phys,
+ __pgprot(mtype->prot_pte));
+}
+EXPORT_SYMBOL(ioremap_page);
+
+/*
+ * Section support is unsafe on SMP - If you iounmap and ioremap a region,
+ * the other CPUs will not see this change until their next context switch.
+ * Meanwhile, (eg) if an interrupt comes in on one of those other CPUs
+ * which requires the new ioremap'd region to be referenced, the CPU will
+ * reference the _old_ region.
+ *
+ * Note that get_vm_area_caller() allocates a guard 4K page, so we need to
+ * mask the size back to 4MB aligned or we will overflow in the loop below.
+ */
+static void unmap_area_sections(unsigned long virt, unsigned long size)
+{
+ unsigned long addr = virt, end = virt + (size & ~(SZ_4M - 1));
+ pgd_t *pgd;
+
+ flush_cache_vunmap(addr, end);
+ pgd = pgd_offset_k(addr);
+ do {
+ pmd_t pmd, *pmdp = pmd_offset((pud_t *)pgd, addr);
+
+ pmd = *pmdp;
+ if (!pmd_none(pmd)) {
+ /*
+ * Clear the PMD from the page table, and
+ * increment the kvm sequence so others
+ * notice this change.
+ *
+ * Note: this is still racy on SMP machines.
+ */
+ pmd_clear(pmdp);
+
+ /*
+ * Free the page table, if there was one.
+ */
+ if ((pmd_val(pmd) & PMD_TYPE_MASK) == PMD_TYPE_TABLE)
+ pte_free_kernel(&init_mm, pmd_page_vaddr(pmd));
+ }
+
+ addr += PGDIR_SIZE;
+ pgd++;
+ } while (addr < end);
+
+ flush_tlb_kernel_range(virt, end);
+}
+
+static int
+remap_area_sections(unsigned long virt, unsigned long pfn,
+ size_t size, const struct mem_type *type)
+{
+ unsigned long addr = virt, end = virt + size;
+ pgd_t *pgd;
+
+ /*
+ * Remove and free any PTE-based mapping, and
+ * sync the current kernel mapping.
+ */
+ unmap_area_sections(virt, size);
+
+ pgd = pgd_offset_k(addr);
+ do {
+ pmd_t *pmd = pmd_offset((pud_t *)pgd, addr);
+
+ set_pmd(pmd, __pmd(__pfn_to_phys(pfn) | type->prot_sect));
+ pfn += SZ_4M >> PAGE_SHIFT;
+ flush_pmd_entry(pmd);
+
+ addr += PGDIR_SIZE;
+ pgd++;
+ } while (addr < end);
+
+ return 0;
+}
+
+void __iomem *__uc32_ioremap_pfn_caller(unsigned long pfn,
+ unsigned long offset, size_t size, unsigned int mtype, void *caller)
+{
+ const struct mem_type *type;
+ int err;
+ unsigned long addr;
+ struct vm_struct *area;
+
+ /*
+ * High mappings must be section aligned
+ */
+ if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SECTION_MASK))
+ return NULL;
+
+ /*
+ * Don't allow RAM to be mapped
+ */
+ if (pfn_valid(pfn)) {
+ printk(KERN_WARNING "BUG: Your driver calls ioremap() on\n"
+ "system memory. This leads to architecturally\n"
+ "unpredictable behaviour, and ioremap() will fail in\n"
+ "the next kernel release. Please fix your driver.\n");
+ WARN_ON(1);
+ }
+
+ type = get_mem_type(mtype);
+ if (!type)
+ return NULL;
+
+ /*
+ * Page align the mapping size, taking account of any offset.
+ */
+ size = PAGE_ALIGN(offset + size);
+
+ area = get_vm_area_caller(size, VM_IOREMAP, caller);
+ if (!area)
+ return NULL;
+ addr = (unsigned long)area->addr;
+
+ if (!((__pfn_to_phys(pfn) | size | addr) & ~PMD_MASK)) {
+ area->flags |= VM_UNICORE_SECTION_MAPPING;
+ err = remap_area_sections(addr, pfn, size, type);
+ } else
+ err = ioremap_page_range(addr, addr + size, __pfn_to_phys(pfn),
+ __pgprot(type->prot_pte));
+
+ if (err) {
+ vunmap((void *)addr);
+ return NULL;
+ }
+
+ flush_cache_vmap(addr, addr + size);
+ return (void __iomem *) (offset + addr);
+}
+
+void __iomem *__uc32_ioremap_caller(unsigned long phys_addr, size_t size,
+ unsigned int mtype, void *caller)
+{
+ unsigned long last_addr;
+ unsigned long offset = phys_addr & ~PAGE_MASK;
+ unsigned long pfn = __phys_to_pfn(phys_addr);
+
+ /*
+ * Don't allow wraparound or zero size
+ */
+ last_addr = phys_addr + size - 1;
+ if (!size || last_addr < phys_addr)
+ return NULL;
+
+ return __uc32_ioremap_pfn_caller(pfn, offset, size, mtype, caller);
+}
+
+/*
+ * Remap an arbitrary physical address space into the kernel virtual
+ * address space. Needed when the kernel wants to access high addresses
+ * directly.
+ *
+ * NOTE! We need to allow non-page-aligned mappings too: we will obviously
+ * have to convert them into an offset in a page-aligned mapping, but the
+ * caller shouldn't need to know that small detail.
+ */
+void __iomem *
+__uc32_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
+ unsigned int mtype)
+{
+ return __uc32_ioremap_pfn_caller(pfn, offset, size, mtype,
+ __builtin_return_address(0));
+}
+EXPORT_SYMBOL(__uc32_ioremap_pfn);
+
+void __iomem *
+__uc32_ioremap(unsigned long phys_addr, size_t size)
+{
+ return __uc32_ioremap_caller(phys_addr, size, MT_DEVICE,
+ __builtin_return_address(0));
+}
+EXPORT_SYMBOL(__uc32_ioremap);
+
+void __iomem *
+__uc32_ioremap_cached(unsigned long phys_addr, size_t size)
+{
+ return __uc32_ioremap_caller(phys_addr, size, MT_DEVICE_CACHED,
+ __builtin_return_address(0));
+}
+EXPORT_SYMBOL(__uc32_ioremap_cached);
+
+void __uc32_iounmap(volatile void __iomem *io_addr)
+{
+ void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
+ struct vm_struct **p, *tmp;
+
+ /*
+ * If this is a section based mapping we need to handle it
+ * specially as the VM subsystem does not know how to handle
+ * such a beast. We need the lock here b/c we need to clear
+ * all the mappings before the area can be reclaimed
+ * by someone else.
+ */
+ write_lock(&vmlist_lock);
+ for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
+ if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
+ if (tmp->flags & VM_UNICORE_SECTION_MAPPING) {
+ unmap_area_sections((unsigned long)tmp->addr,
+ tmp->size);
+ }
+ break;
+ }
+ }
+ write_unlock(&vmlist_lock);
+
+ vunmap(addr);
+}
+EXPORT_SYMBOL(__uc32_iounmap);
diff --git a/arch/unicore32/mm/mm.h b/arch/unicore32/mm/mm.h
new file mode 100644
index 00000000000..3296bca0f1f
--- /dev/null
+++ b/arch/unicore32/mm/mm.h
@@ -0,0 +1,39 @@
+/*
+ * linux/arch/unicore32/mm/mm.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/* the upper-most page table pointer */
+extern pmd_t *top_pmd;
+extern int sysctl_overcommit_memory;
+
+#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
+
+static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
+{
+ return pmd_offset((pud_t *)pgd, virt);
+}
+
+static inline pmd_t *pmd_off_k(unsigned long virt)
+{
+ return pmd_off(pgd_offset_k(virt), virt);
+}
+
+struct mem_type {
+ unsigned int prot_pte;
+ unsigned int prot_l1;
+ unsigned int prot_sect;
+};
+
+const struct mem_type *get_mem_type(unsigned int type);
+
+extern void __flush_dcache_page(struct address_space *, struct page *);
+
+void __init bootmem_init(void);
+void uc32_mm_memblock_reserve(void);
diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c
new file mode 100644
index 00000000000..7bf3d588631
--- /dev/null
+++ b/arch/unicore32/mm/mmu.c
@@ -0,0 +1,533 @@
+/*
+ * linux/arch/unicore32/mm/mmu.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/mman.h>
+#include <linux/nodemask.h>
+#include <linux/memblock.h>
+#include <linux/fs.h>
+#include <linux/bootmem.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/sizes.h>
+#include <asm/tlb.h>
+
+#include <mach/map.h>
+
+#include "mm.h"
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+/*
+ * empty_zero_page is a special page that is used for
+ * zero-initialized data and COW.
+ */
+struct page *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
+
+/*
+ * The pmd table for the upper-most set of pages.
+ */
+pmd_t *top_pmd;
+
+pgprot_t pgprot_user;
+EXPORT_SYMBOL(pgprot_user);
+
+pgprot_t pgprot_kernel;
+EXPORT_SYMBOL(pgprot_kernel);
+
+static int __init noalign_setup(char *__unused)
+{
+ cr_alignment &= ~CR_A;
+ cr_no_alignment &= ~CR_A;
+ set_cr(cr_alignment);
+ return 1;
+}
+__setup("noalign", noalign_setup);
+
+void adjust_cr(unsigned long mask, unsigned long set)
+{
+ unsigned long flags;
+
+ mask &= ~CR_A;
+
+ set &= mask;
+
+ local_irq_save(flags);
+
+ cr_no_alignment = (cr_no_alignment & ~mask) | set;
+ cr_alignment = (cr_alignment & ~mask) | set;
+
+ set_cr((get_cr() & ~mask) | set);
+
+ local_irq_restore(flags);
+}
+
+struct map_desc {
+ unsigned long virtual;
+ unsigned long pfn;
+ unsigned long length;
+ unsigned int type;
+};
+
+#define PROT_PTE_DEVICE (PTE_PRESENT | PTE_YOUNG | \
+ PTE_DIRTY | PTE_READ | PTE_WRITE)
+#define PROT_SECT_DEVICE (PMD_TYPE_SECT | PMD_PRESENT | \
+ PMD_SECT_READ | PMD_SECT_WRITE)
+
+static struct mem_type mem_types[] = {
+ [MT_DEVICE] = { /* Strongly ordered */
+ .prot_pte = PROT_PTE_DEVICE,
+ .prot_l1 = PMD_TYPE_TABLE | PMD_PRESENT,
+ .prot_sect = PROT_SECT_DEVICE,
+ },
+ /*
+ * MT_KUSER: pte for vecpage -- cacheable,
+ * and sect for unigfx mmap -- noncacheable
+ */
+ [MT_KUSER] = {
+ .prot_pte = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
+ PTE_CACHEABLE | PTE_READ | PTE_EXEC,
+ .prot_l1 = PMD_TYPE_TABLE | PMD_PRESENT,
+ .prot_sect = PROT_SECT_DEVICE,
+ },
+ [MT_HIGH_VECTORS] = {
+ .prot_pte = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
+ PTE_CACHEABLE | PTE_READ | PTE_WRITE |
+ PTE_EXEC,
+ .prot_l1 = PMD_TYPE_TABLE | PMD_PRESENT,
+ },
+ [MT_MEMORY] = {
+ .prot_pte = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
+ PTE_WRITE | PTE_EXEC,
+ .prot_l1 = PMD_TYPE_TABLE | PMD_PRESENT,
+ .prot_sect = PMD_TYPE_SECT | PMD_PRESENT | PMD_SECT_CACHEABLE |
+ PMD_SECT_READ | PMD_SECT_WRITE | PMD_SECT_EXEC,
+ },
+ [MT_ROM] = {
+ .prot_sect = PMD_TYPE_SECT | PMD_PRESENT | PMD_SECT_CACHEABLE |
+ PMD_SECT_READ,
+ },
+};
+
+const struct mem_type *get_mem_type(unsigned int type)
+{
+ return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
+}
+EXPORT_SYMBOL(get_mem_type);
+
+/*
+ * Adjust the PMD section entries according to the CPU in use.
+ */
+static void __init build_mem_type_table(void)
+{
+ pgprot_user = __pgprot(PTE_PRESENT | PTE_YOUNG | PTE_CACHEABLE);
+ pgprot_kernel = __pgprot(PTE_PRESENT | PTE_YOUNG |
+ PTE_DIRTY | PTE_READ | PTE_WRITE |
+ PTE_EXEC | PTE_CACHEABLE);
+}
+
+#define vectors_base() (vectors_high() ? 0xffff0000 : 0)
+
+static void __init *early_alloc(unsigned long sz)
+{
+ void *ptr = __va(memblock_alloc(sz, sz));
+ memset(ptr, 0, sz);
+ return ptr;
+}
+
+static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr,
+ unsigned long prot)
+{
+ if (pmd_none(*pmd)) {
+ pte_t *pte = early_alloc(PTRS_PER_PTE * sizeof(pte_t));
+ __pmd_populate(pmd, __pa(pte) | prot);
+ }
+ BUG_ON(pmd_bad(*pmd));
+ return pte_offset_kernel(pmd, addr);
+}
+
+static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
+ unsigned long end, unsigned long pfn,
+ const struct mem_type *type)
+{
+ pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
+ do {
+ set_pte(pte, pfn_pte(pfn, __pgprot(type->prot_pte)));
+ pfn++;
+ } while (pte++, addr += PAGE_SIZE, addr != end);
+}
+
+static void __init alloc_init_section(pgd_t *pgd, unsigned long addr,
+ unsigned long end, unsigned long phys,
+ const struct mem_type *type)
+{
+ pmd_t *pmd = pmd_offset((pud_t *)pgd, addr);
+
+ /*
+ * Try a section mapping - end, addr and phys must all be aligned
+ * to a section boundary.
+ */
+ if (((addr | end | phys) & ~SECTION_MASK) == 0) {
+ pmd_t *p = pmd;
+
+ do {
+ set_pmd(pmd, __pmd(phys | type->prot_sect));
+ phys += SECTION_SIZE;
+ } while (pmd++, addr += SECTION_SIZE, addr != end);
+
+ flush_pmd_entry(p);
+ } else {
+ /*
+ * No need to loop; pte's aren't interested in the
+ * individual L1 entries.
+ */
+ alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
+ }
+}
+
+/*
+ * Create the page directory entries and any necessary
+ * page tables for the mapping specified by `md'. We
+ * are able to cope here with varying sizes and address
+ * offsets, and we take full advantage of sections.
+ */
+static void __init create_mapping(struct map_desc *md)
+{
+ unsigned long phys, addr, length, end;
+ const struct mem_type *type;
+ pgd_t *pgd;
+
+ if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
+ printk(KERN_WARNING "BUG: not creating mapping for "
+ "0x%08llx at 0x%08lx in user region\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
+ return;
+ }
+
+ if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+ md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
+ printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
+ "overlaps vmalloc space\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
+ }
+
+ type = &mem_types[md->type];
+
+ addr = md->virtual & PAGE_MASK;
+ phys = (unsigned long)__pfn_to_phys(md->pfn);
+ length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
+
+ if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) {
+ printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
+ "be mapped using pages, ignoring.\n",
+ __pfn_to_phys(md->pfn), addr);
+ return;
+ }
+
+ pgd = pgd_offset_k(addr);
+ end = addr + length;
+ do {
+ unsigned long next = pgd_addr_end(addr, end);
+
+ alloc_init_section(pgd, addr, next, phys, type);
+
+ phys += next - addr;
+ addr = next;
+ } while (pgd++, addr != end);
+}
+
+static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M);
+
+/*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the vmalloc
+ * area - the default is 128m.
+ */
+static int __init early_vmalloc(char *arg)
+{
+ unsigned long vmalloc_reserve = memparse(arg, NULL);
+
+ if (vmalloc_reserve < SZ_16M) {
+ vmalloc_reserve = SZ_16M;
+ printk(KERN_WARNING
+ "vmalloc area too small, limiting to %luMB\n",
+ vmalloc_reserve >> 20);
+ }
+
+ if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
+ vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
+ printk(KERN_WARNING
+ "vmalloc area is too big, limiting to %luMB\n",
+ vmalloc_reserve >> 20);
+ }
+
+ vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
+ return 0;
+}
+early_param("vmalloc", early_vmalloc);
+
+static phys_addr_t lowmem_limit __initdata = SZ_1G;
+
+static void __init sanity_check_meminfo(void)
+{
+ int i, j;
+
+ lowmem_limit = __pa(vmalloc_min - 1) + 1;
+ memblock_set_current_limit(lowmem_limit);
+
+ for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
+ struct membank *bank = &meminfo.bank[j];
+ *bank = meminfo.bank[i];
+ j++;
+ }
+ meminfo.nr_banks = j;
+}
+
+static inline void prepare_page_table(void)
+{
+ unsigned long addr;
+ phys_addr_t end;
+
+ /*
+ * Clear out all the mappings below the kernel image.
+ */
+ for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+ for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+ /*
+ * Find the end of the first block of lowmem.
+ */
+ end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
+ if (end >= lowmem_limit)
+ end = lowmem_limit;
+
+ /*
+ * Clear out all the kernel space mappings, except for the first
+ * memory bank, up to the end of the vmalloc region.
+ */
+ for (addr = __phys_to_virt(end);
+ addr < VMALLOC_END; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+}
+
+/*
+ * Reserve the special regions of memory
+ */
+void __init uc32_mm_memblock_reserve(void)
+{
+ /*
+ * Reserve the page tables. These are already in use,
+ * and can only be in node 0.
+ */
+ memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
+
+#ifdef CONFIG_PUV3_UNIGFX
+ /*
+ * These should likewise go elsewhere. They pre-reserve the
+ * screen/video memory region at the 48M~64M of main system memory.
+ */
+ memblock_reserve(PKUNITY_UNIGFX_MMAP_BASE, PKUNITY_UNIGFX_MMAP_SIZE);
+ memblock_reserve(PKUNITY_UVC_MMAP_BASE, PKUNITY_UVC_MMAP_SIZE);
+#endif
+}
+
+/*
+ * Set up device the mappings. Since we clear out the page tables for all
+ * mappings above VMALLOC_END, we will remove any debug device mappings.
+ * This means you have to be careful how you debug this function, or any
+ * called function. This means you can't use any function or debugging
+ * method which may touch any device, otherwise the kernel _will_ crash.
+ */
+static void __init devicemaps_init(void)
+{
+ struct map_desc map;
+ unsigned long addr;
+ void *vectors;
+
+ /*
+ * Allocate the vector page early.
+ */
+ vectors = early_alloc(PAGE_SIZE);
+
+ for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+ /*
+ * Create a mapping for UniGFX VRAM
+ */
+#ifdef CONFIG_PUV3_UNIGFX
+ map.pfn = __phys_to_pfn(PKUNITY_UNIGFX_MMAP_BASE);
+ map.virtual = KUSER_UNIGFX_BASE;
+ map.length = PKUNITY_UNIGFX_MMAP_SIZE;
+ map.type = MT_KUSER;
+ create_mapping(&map);
+#endif
+
+ /*
+ * Create a mapping for the machine vectors at the high-vectors
+ * location (0xffff0000). If we aren't using high-vectors, also
+ * create a mapping at the low-vectors virtual address.
+ */
+ map.pfn = __phys_to_pfn(virt_to_phys(vectors));
+ map.virtual = VECTORS_BASE;
+ map.length = PAGE_SIZE;
+ map.type = MT_HIGH_VECTORS;
+ create_mapping(&map);
+
+ /*
+ * Create a mapping for the kuser page at the special
+ * location (0xbfff0000) to the same vectors location.
+ */
+ map.pfn = __phys_to_pfn(virt_to_phys(vectors));
+ map.virtual = KUSER_VECPAGE_BASE;
+ map.length = PAGE_SIZE;
+ map.type = MT_KUSER;
+ create_mapping(&map);
+
+ /*
+ * Finally flush the caches and tlb to ensure that we're in a
+ * consistent state wrt the writebuffer. This also ensures that
+ * any write-allocated cache lines in the vector page are written
+ * back. After this point, we can start to touch devices again.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+}
+
+static void __init map_lowmem(void)
+{
+ struct memblock_region *reg;
+
+ /* Map all the lowmem memory banks. */
+ for_each_memblock(memory, reg) {
+ phys_addr_t start = reg->base;
+ phys_addr_t end = start + reg->size;
+ struct map_desc map;
+
+ if (end > lowmem_limit)
+ end = lowmem_limit;
+ if (start >= end)
+ break;
+
+ map.pfn = __phys_to_pfn(start);
+ map.virtual = __phys_to_virt(start);
+ map.length = end - start;
+ map.type = MT_MEMORY;
+
+ create_mapping(&map);
+ }
+}
+
+/*
+ * paging_init() sets up the page tables, initialises the zone memory
+ * maps, and sets up the zero page, bad page and bad page tables.
+ */
+void __init paging_init(void)
+{
+ void *zero_page;
+
+ build_mem_type_table();
+ sanity_check_meminfo();
+ prepare_page_table();
+ map_lowmem();
+ devicemaps_init();
+
+ top_pmd = pmd_off_k(0xffff0000);
+
+ /* allocate the zero page. */
+ zero_page = early_alloc(PAGE_SIZE);
+
+ bootmem_init();
+
+ empty_zero_page = virt_to_page(zero_page);
+ __flush_dcache_page(NULL, empty_zero_page);
+}
+
+/*
+ * In order to soft-boot, we need to insert a 1:1 mapping in place of
+ * the user-mode pages. This will then ensure that we have predictable
+ * results when turning the mmu off
+ */
+void setup_mm_for_reboot(char mode)
+{
+ unsigned long base_pmdval;
+ pgd_t *pgd;
+ int i;
+
+ /*
+ * We need to access to user-mode page tables here. For kernel threads
+ * we don't have any user-mode mappings so we use the context that we
+ * "borrowed".
+ */
+ pgd = current->active_mm->pgd;
+
+ base_pmdval = PMD_SECT_WRITE | PMD_SECT_READ | PMD_TYPE_SECT;
+
+ for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
+ unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval;
+ pmd_t *pmd;
+
+ pmd = pmd_off(pgd, i << PGDIR_SHIFT);
+ set_pmd(pmd, __pmd(pmdval));
+ flush_pmd_entry(pmd);
+ }
+
+ local_flush_tlb_all();
+}
+
+/*
+ * Take care of architecture specific things when placing a new PTE into
+ * a page table, or changing an existing PTE. Basically, there are two
+ * things that we need to take care of:
+ *
+ * 1. If PG_dcache_clean is not set for the page, we need to ensure
+ * that any cache entries for the kernels virtual memory
+ * range are written back to the page.
+ * 2. If we have multiple shared mappings of the same space in
+ * an object, we need to deal with the cache aliasing issues.
+ *
+ * Note that the pte lock will be held.
+ */
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
+ pte_t *ptep)
+{
+ unsigned long pfn = pte_pfn(*ptep);
+ struct address_space *mapping;
+ struct page *page;
+
+ if (!pfn_valid(pfn))
+ return;
+
+ /*
+ * The zero page is never written to, so never has any dirty
+ * cache lines, and therefore never needs to be flushed.
+ */
+ page = pfn_to_page(pfn);
+ if (page == ZERO_PAGE(0))
+ return;
+
+ mapping = page_mapping(page);
+ if (!test_and_set_bit(PG_dcache_clean, &page->flags))
+ __flush_dcache_page(mapping, page);
+ if (mapping)
+ if (vma->vm_flags & VM_EXEC)
+ __flush_icache_all();
+}
diff --git a/arch/unicore32/mm/pgd.c b/arch/unicore32/mm/pgd.c
new file mode 100644
index 00000000000..08b8d4295e7
--- /dev/null
+++ b/arch/unicore32/mm/pgd.c
@@ -0,0 +1,102 @@
+/*
+ * linux/arch/unicore32/mm/pgd.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/mm.h>
+#include <linux/gfp.h>
+#include <linux/highmem.h>
+
+#include <asm/pgalloc.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+
+#include "mm.h"
+
+#define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
+
+/*
+ * need to get a 4k page for level 1
+ */
+pgd_t *get_pgd_slow(struct mm_struct *mm)
+{
+ pgd_t *new_pgd, *init_pgd;
+ pmd_t *new_pmd, *init_pmd;
+ pte_t *new_pte, *init_pte;
+
+ new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 0);
+ if (!new_pgd)
+ goto no_pgd;
+
+ memset(new_pgd, 0, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
+
+ /*
+ * Copy over the kernel and IO PGD entries
+ */
+ init_pgd = pgd_offset_k(0);
+ memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
+ (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
+
+ clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
+
+ if (!vectors_high()) {
+ /*
+ * On UniCore, first page must always be allocated since it
+ * contains the machine vectors.
+ */
+ new_pmd = pmd_alloc(mm, (pud_t *)new_pgd, 0);
+ if (!new_pmd)
+ goto no_pmd;
+
+ new_pte = pte_alloc_map(mm, NULL, new_pmd, 0);
+ if (!new_pte)
+ goto no_pte;
+
+ init_pmd = pmd_offset((pud_t *)init_pgd, 0);
+ init_pte = pte_offset_map(init_pmd, 0);
+ set_pte(new_pte, *init_pte);
+ pte_unmap(init_pte);
+ pte_unmap(new_pte);
+ }
+
+ return new_pgd;
+
+no_pte:
+ pmd_free(mm, new_pmd);
+no_pmd:
+ free_pages((unsigned long)new_pgd, 0);
+no_pgd:
+ return NULL;
+}
+
+void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd)
+{
+ pmd_t *pmd;
+ pgtable_t pte;
+
+ if (!pgd)
+ return;
+
+ /* pgd is always present and good */
+ pmd = pmd_off(pgd, 0);
+ if (pmd_none(*pmd))
+ goto free;
+ if (pmd_bad(*pmd)) {
+ pmd_ERROR(*pmd);
+ pmd_clear(pmd);
+ goto free;
+ }
+
+ pte = pmd_pgtable(*pmd);
+ pmd_clear(pmd);
+ pte_free(mm, pte);
+ pmd_free(mm, pmd);
+free:
+ free_pages((unsigned long) pgd, 0);
+}
diff --git a/arch/unicore32/mm/proc-macros.S b/arch/unicore32/mm/proc-macros.S
new file mode 100644
index 00000000000..51560d68c89
--- /dev/null
+++ b/arch/unicore32/mm/proc-macros.S
@@ -0,0 +1,145 @@
+/*
+ * linux/arch/unicore32/mm/proc-macros.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * We need constants.h for:
+ * VMA_VM_MM
+ * VMA_VM_FLAGS
+ * VM_EXEC
+ */
+#include <generated/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/memory.h>
+
+/*
+ * the cache line sizes of the I and D cache are the same
+ */
+#define CACHE_LINESIZE 32
+
+/*
+ * This is the maximum size of an area which will be invalidated
+ * using the single invalidate entry instructions. Anything larger
+ * than this, and we go for the whole cache.
+ *
+ * This value should be chosen such that we choose the cheapest
+ * alternative.
+ */
+#ifdef CONFIG_CPU_UCV2
+#define MAX_AREA_SIZE 0x800 /* 64 cache line */
+#endif
+
+/*
+ * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
+ */
+ .macro vma_vm_mm, rd, rn
+ ldw \rd, [\rn+], #VMA_VM_MM
+ .endm
+
+/*
+ * vma_vm_flags - get vma->vm_flags
+ */
+ .macro vma_vm_flags, rd, rn
+ ldw \rd, [\rn+], #VMA_VM_FLAGS
+ .endm
+
+ .macro tsk_mm, rd, rn
+ ldw \rd, [\rn+], #TI_TASK
+ ldw \rd, [\rd+], #TSK_ACTIVE_MM
+ .endm
+
+/*
+ * act_mm - get current->active_mm
+ */
+ .macro act_mm, rd
+ andn \rd, sp, #8128
+ andn \rd, \rd, #63
+ ldw \rd, [\rd+], #TI_TASK
+ ldw \rd, [\rd+], #TSK_ACTIVE_MM
+ .endm
+
+/*
+ * mmid - get context id from mm pointer (mm->context.id)
+ */
+ .macro mmid, rd, rn
+ ldw \rd, [\rn+], #MM_CONTEXT_ID
+ .endm
+
+/*
+ * mask_asid - mask the ASID from the context ID
+ */
+ .macro asid, rd, rn
+ and \rd, \rn, #255
+ .endm
+
+ .macro crval, clear, mmuset, ucset
+ .word \clear
+ .word \mmuset
+ .endm
+
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+/*
+ * va2pa va, pa, tbl, msk, off, err
+ * This macro is used to translate virtual address to its physical address.
+ *
+ * va: virtual address
+ * pa: physical address, result is stored in this register
+ * tbl, msk, off: temp registers, will be destroyed
+ * err: jump to error label if the physical address not exist
+ * NOTE: all regs must be different
+ */
+ .macro va2pa, va, pa, tbl, msk, off, err=990f
+ movc \pa, p0.c2, #0
+ mov \off, \va >> #22 @ off <- index of 1st page table
+ adr \tbl, 910f @ tbl <- table of 1st page table
+900: @ ---- handle 1, 2 page table
+ add \pa, \pa, #PAGE_OFFSET @ pa <- virt addr of page table
+ ldw \pa, [\pa+], \off << #2 @ pa <- the content of pt
+ cand.a \pa, #4 @ test exist bit
+ beq \err @ if not exist
+ and \off, \pa, #3 @ off <- the last 2 bits
+ add \tbl, \tbl, \off << #3 @ cmove table pointer
+ ldw \msk, [\tbl+], #0 @ get the mask
+ ldw pc, [\tbl+], #4
+930: @ ---- handle 2nd page table
+ and \pa, \pa, \msk @ pa <- phys addr of 2nd pt
+ mov \off, \va << #10
+ cntlo \tbl, \msk @ use tbl as temp reg
+ mov \off, \off >> \tbl
+ mov \off, \off >> #2 @ off <- index of 2nd pt
+ adr \tbl, 920f @ tbl <- table of 2nd pt
+ b 900b
+910: @ 1st level page table
+ .word 0xfffff000, 930b @ second level page table
+ .word 0xfffffc00, 930b @ second level large page table
+ .word 0x00000000, \err @ invalid
+ .word 0xffc00000, 980f @ super page
+
+920: @ 2nd level page table
+ .word 0xfffff000, 980f @ page
+ .word 0xffffc000, 980f @ middle page
+ .word 0xffff0000, 980f @ large page
+ .word 0x00000000, \err @ invalid
+980:
+ andn \tbl, \va, \msk
+ and \pa, \pa, \msk
+ or \pa, \pa, \tbl
+990:
+ .endm
+#endif
+
+ .macro dcacheline_flush, addr, t1, t2
+ mov \t1, \addr << #20
+ ldw \t2, =_stext @ _stext must ALIGN(4096)
+ add \t2, \t2, \t1 >> #20
+ ldw \t1, [\t2+], #0x0000
+ ldw \t1, [\t2+], #0x1000
+ ldw \t1, [\t2+], #0x2000
+ ldw \t1, [\t2+], #0x3000
+ .endm
diff --git a/arch/unicore32/mm/proc-syms.c b/arch/unicore32/mm/proc-syms.c
new file mode 100644
index 00000000000..f30071e3665
--- /dev/null
+++ b/arch/unicore32/mm/proc-syms.c
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/unicore32/mm/proc-syms.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+
+EXPORT_SYMBOL(cpu_dcache_clean_area);
+EXPORT_SYMBOL(cpu_set_pte);
+
+EXPORT_SYMBOL(__cpuc_dma_flush_range);
+EXPORT_SYMBOL(__cpuc_dma_clean_range);
diff --git a/arch/unicore32/mm/proc-ucv2.S b/arch/unicore32/mm/proc-ucv2.S
new file mode 100644
index 00000000000..9d296092e36
--- /dev/null
+++ b/arch/unicore32/mm/proc-ucv2.S
@@ -0,0 +1,134 @@
+/*
+ * linux/arch/unicore32/mm/proc-ucv2.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+
+#include "proc-macros.S"
+
+ENTRY(cpu_proc_fin)
+ stm.w (lr), [sp-]
+ mov ip, #PSR_R_BIT | PSR_I_BIT | PRIV_MODE
+ mov.a asr, ip
+ b.l __cpuc_flush_kern_all
+ ldm.w (pc), [sp]+
+
+/*
+ * cpu_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * - loc - location to jump to for soft reset
+ */
+ .align 5
+ENTRY(cpu_reset)
+ mov ip, #0
+ movc p0.c5, ip, #28 @ Cache invalidate all
+ nop8
+
+ movc p0.c6, ip, #6 @ TLB invalidate all
+ nop8
+
+ movc ip, p0.c1, #0 @ ctrl register
+ or ip, ip, #0x2000 @ vector base address
+ andn ip, ip, #0x000f @ ............idam
+ movc p0.c1, ip, #0 @ disable caches and mmu
+ nop
+ mov pc, r0 @ jump to loc
+ nop8
+
+/*
+ * cpu_do_idle()
+ *
+ * Idle the processor (eg, wait for interrupt).
+ *
+ * IRQs are already disabled.
+ */
+ENTRY(cpu_do_idle)
+ mov r0, #0 @ PCI address
+ .rept 8
+ ldw r1, [r0]
+ .endr
+ mov pc, lr
+
+ENTRY(cpu_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+ csub.a r1, #MAX_AREA_SIZE
+ bsg 101f
+ mov r9, #PAGE_SZ
+ sub r9, r9, #1 @ PAGE_MASK
+1: va2pa r0, r10, r11, r12, r13 @ r10 is PA
+ b 3f
+2: cand.a r0, r9
+ beq 1b
+3: movc p0.c5, r10, #11 @ clean D entry
+ nop8
+ add r0, r0, #CACHE_LINESIZE
+ add r10, r10, #CACHE_LINESIZE
+ sub.a r1, r1, #CACHE_LINESIZE
+ bua 2b
+ mov pc, lr
+#endif
+101: mov ip, #0
+ movc p0.c5, ip, #10 @ Dcache clean all
+ nop8
+
+ mov pc, lr
+
+/*
+ * cpu_do_switch_mm(pgd_phys)
+ *
+ * Set the translation table base pointer to be pgd_phys
+ *
+ * - pgd_phys - physical address of new pgd
+ *
+ * It is assumed that:
+ * - we are not using split page tables
+ */
+ .align 5
+ENTRY(cpu_do_switch_mm)
+ movc p0.c2, r0, #0 @ update page table ptr
+ nop8
+
+ movc p0.c6, ip, #6 @ TLB invalidate all
+ nop8
+
+ mov pc, lr
+
+/*
+ * cpu_set_pte(ptep, pte)
+ *
+ * Set a level 2 translation table entry.
+ *
+ * - ptep - pointer to level 2 translation table entry
+ * - pte - PTE value to store
+ */
+ .align 5
+ENTRY(cpu_set_pte)
+ stw r1, [r0]
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+ sub r2, r0, #PAGE_OFFSET
+ movc p0.c5, r2, #11 @ Dcache clean line
+ nop8
+#else
+ mov ip, #0
+ movc p0.c5, ip, #10 @ Dcache clean all
+ nop8
+ @dcacheline_flush r0, r2, ip
+#endif
+ mov pc, lr
+
diff --git a/arch/unicore32/mm/tlb-ucv2.S b/arch/unicore32/mm/tlb-ucv2.S
new file mode 100644
index 00000000000..061d455f9a1
--- /dev/null
+++ b/arch/unicore32/mm/tlb-ucv2.S
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/unicore32/mm/tlb-ucv2.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+#include "proc-macros.S"
+
+/*
+ * __cpu_flush_user_tlb_range(start, end, vma)
+ *
+ * Invalidate a range of TLB entries in the specified address space.
+ *
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ * - vma - vma_struct describing address range
+ */
+ENTRY(__cpu_flush_user_tlb_range)
+#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
+ mov r0, r0 >> #PAGE_SHIFT @ align address
+ mov r0, r0 << #PAGE_SHIFT
+ vma_vm_flags r2, r2 @ get vma->vm_flags
+1:
+ movc p0.c6, r0, #3
+ nop8
+
+ cand.a r2, #VM_EXEC @ Executable area ?
+ beq 2f
+
+ movc p0.c6, r0, #5
+ nop8
+2:
+ add r0, r0, #PAGE_SZ
+ csub.a r0, r1
+ beb 1b
+#else
+ movc p0.c6, r0, #2
+ nop8
+
+ cand.a r2, #VM_EXEC @ Executable area ?
+ beq 2f
+
+ movc p0.c6, r0, #4
+ nop8
+2:
+#endif
+ mov pc, lr
+
+/*
+ * __cpu_flush_kern_tlb_range(start,end)
+ *
+ * Invalidate a range of kernel TLB entries
+ *
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ */
+ENTRY(__cpu_flush_kern_tlb_range)
+#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
+ mov r0, r0 >> #PAGE_SHIFT @ align address
+ mov r0, r0 << #PAGE_SHIFT
+1:
+ movc p0.c6, r0, #3
+ nop8
+
+ movc p0.c6, r0, #5
+ nop8
+
+ add r0, r0, #PAGE_SZ
+ csub.a r0, r1
+ beb 1b
+#else
+ movc p0.c6, r0, #2
+ nop8
+
+ movc p0.c6, r0, #4
+ nop8
+#endif
+ mov pc, lr
+
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 113505a6434..cbfcf6fb4a6 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -523,6 +523,17 @@ config I2C_PNX
This driver can also be built as a module. If so, the module
will be called i2c-pnx.
+config I2C_PUV3
+ tristate "PKUnity v3 I2C bus support"
+ depends on UNICORE32 && ARCH_PUV3
+ select I2C_ALGOBIT
+ help
+ This driver supports the I2C IP inside the PKUnity-v3 SoC.
+ This I2C bus controller is under AMBA/AXI bus.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-puv3.
+
config I2C_PXA
tristate "Intel PXA2XX I2C adapter"
depends on ARCH_PXA || ARCH_MMP
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 9d2d0ec7fb2..a83966acc5a 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o
obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
+obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
diff --git a/drivers/i2c/busses/i2c-puv3.c b/drivers/i2c/busses/i2c-puv3.c
new file mode 100644
index 00000000000..fac67394084
--- /dev/null
+++ b/drivers/i2c/busses/i2c-puv3.c
@@ -0,0 +1,306 @@
+/*
+ * I2C driver for PKUnity-v3 SoC
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+/*
+ * Poll the i2c status register until the specified bit is set.
+ * Returns 0 if timed out (100 msec).
+ */
+static short poll_status(unsigned long bit)
+{
+ int loop_cntr = 1000;
+
+ if (bit & I2C_STATUS_TFNF) {
+ do {
+ udelay(10);
+ } while (!(readl(I2C_STATUS) & bit) && (--loop_cntr > 0));
+ } else {
+ /* RXRDY handler */
+ do {
+ if (readl(I2C_TAR) == I2C_TAR_EEPROM)
+ msleep(20);
+ else
+ udelay(10);
+ } while (!(readl(I2C_RXFLR) & 0xf) && (--loop_cntr > 0));
+ }
+
+ return (loop_cntr > 0);
+}
+
+static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
+{
+ int i2c_reg = *buf;
+
+ /* Read data */
+ while (length--) {
+ if (!poll_status(I2C_STATUS_TFNF)) {
+ dev_dbg(&adap->dev, "Tx FIFO Not Full timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ /* send addr */
+ writel(i2c_reg | I2C_DATACMD_WRITE, I2C_DATACMD);
+
+ /* get ready to next write */
+ i2c_reg++;
+
+ /* send read CMD */
+ writel(I2C_DATACMD_READ, I2C_DATACMD);
+
+ /* wait until the Rx FIFO have available */
+ if (!poll_status(I2C_STATUS_RFNE)) {
+ dev_dbg(&adap->dev, "RXRDY timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ /* read the data to buf */
+ *buf = (readl(I2C_DATACMD) & I2C_DATACMD_DAT_MASK);
+ buf++;
+ }
+
+ return 0;
+}
+
+static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length)
+{
+ int i2c_reg = *buf;
+
+ /* Do nothing but storing the reg_num to a static variable */
+ if (i2c_reg == -1) {
+ printk(KERN_WARNING "Error i2c reg\n");
+ return -ETIMEDOUT;
+ }
+
+ if (length == 1)
+ return 0;
+
+ buf++;
+ length--;
+ while (length--) {
+ /* send addr */
+ writel(i2c_reg | I2C_DATACMD_WRITE, I2C_DATACMD);
+
+ /* send write CMD */
+ writel(*buf | I2C_DATACMD_WRITE, I2C_DATACMD);
+
+ /* wait until the Rx FIFO have available */
+ msleep(20);
+
+ /* read the data to buf */
+ i2c_reg++;
+ buf++;
+ }
+
+ return 0;
+}
+
+/*
+ * Generic i2c master transfer entrypoint.
+ *
+ */
+static int puv3_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg,
+ int num)
+{
+ int i, ret;
+ unsigned char swap;
+
+ /* Disable i2c */
+ writel(I2C_ENABLE_DISABLE, I2C_ENABLE);
+
+ /* Set the work mode and speed*/
+ writel(I2C_CON_MASTER | I2C_CON_SPEED_STD | I2C_CON_SLAVEDISABLE, I2C_CON);
+
+ writel(pmsg->addr, I2C_TAR);
+
+ /* Enable i2c */
+ writel(I2C_ENABLE_ENABLE, I2C_ENABLE);
+
+ dev_dbg(&adap->dev, "puv3_i2c_xfer: processing %d messages:\n", num);
+
+ for (i = 0; i < num; i++) {
+ dev_dbg(&adap->dev, " #%d: %sing %d byte%s %s 0x%02x\n", i,
+ pmsg->flags & I2C_M_RD ? "read" : "writ",
+ pmsg->len, pmsg->len > 1 ? "s" : "",
+ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
+
+ if (pmsg->len && pmsg->buf) { /* sanity check */
+ if (pmsg->flags & I2C_M_RD)
+ ret = xfer_read(adap, pmsg->buf, pmsg->len);
+ else
+ ret = xfer_write(adap, pmsg->buf, pmsg->len);
+
+ if (ret)
+ return ret;
+
+ }
+ dev_dbg(&adap->dev, "transfer complete\n");
+ pmsg++; /* next message */
+ }
+
+ /* XXX: fixup be16_to_cpu in bq27x00_battery.c */
+ if (pmsg->addr == I2C_TAR_PWIC) {
+ swap = pmsg->buf[0];
+ pmsg->buf[0] = pmsg->buf[1];
+ pmsg->buf[1] = swap;
+ }
+
+ return i;
+}
+
+/*
+ * Return list of supported functionality.
+ */
+static u32 puv3_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm puv3_i2c_algorithm = {
+ .master_xfer = puv3_i2c_xfer,
+ .functionality = puv3_i2c_func,
+};
+
+/*
+ * Main initialization routine.
+ */
+static int __devinit puv3_i2c_probe(struct platform_device *pdev)
+{
+ struct i2c_adapter *adapter;
+ struct resource *mem;
+ int rc;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -ENODEV;
+
+ if (!request_mem_region(mem->start, resource_size(mem), "puv3_i2c"))
+ return -EBUSY;
+
+ adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+ if (adapter == NULL) {
+ dev_err(&pdev->dev, "can't allocate inteface!\n");
+ rc = -ENOMEM;
+ goto fail_nomem;
+ }
+ snprintf(adapter->name, sizeof(adapter->name), "PUV3-I2C at 0x%08x",
+ mem->start);
+ adapter->algo = &puv3_i2c_algorithm;
+ adapter->class = I2C_CLASS_HWMON;
+ adapter->dev.parent = &pdev->dev;
+
+ platform_set_drvdata(pdev, adapter);
+
+ adapter->nr = pdev->id;
+ rc = i2c_add_numbered_adapter(adapter);
+ if (rc) {
+ dev_err(&pdev->dev, "Adapter '%s' registration failed\n",
+ adapter->name);
+ goto fail_add_adapter;
+ }
+
+ dev_info(&pdev->dev, "PKUnity v3 i2c bus adapter.\n");
+ return 0;
+
+fail_add_adapter:
+ platform_set_drvdata(pdev, NULL);
+ kfree(adapter);
+fail_nomem:
+ release_mem_region(mem->start, resource_size(mem));
+
+ return rc;
+}
+
+static int __devexit puv3_i2c_remove(struct platform_device *pdev)
+{
+ struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+ struct resource *mem;
+ int rc;
+
+ rc = i2c_del_adapter(adapter);
+ if (rc) {
+ dev_err(&pdev->dev, "Adapter '%s' delete fail\n",
+ adapter->name);
+ return rc;
+ }
+
+ put_device(&pdev->dev);
+ platform_set_drvdata(pdev, NULL);
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(mem->start, resource_size(mem));
+
+ return rc;
+}
+
+#ifdef CONFIG_PM
+static int puv3_i2c_suspend(struct platform_device *dev, pm_message_t state)
+{
+ int poll_count;
+ /* Disable the IIC */
+ writel(I2C_ENABLE_DISABLE, I2C_ENABLE);
+ for (poll_count = 0; poll_count < 50; poll_count++) {
+ if (readl(I2C_ENSTATUS) & I2C_ENSTATUS_ENABLE)
+ udelay(25);
+ }
+
+ return 0;
+}
+
+static int puv3_i2c_resume(struct platform_device *dev)
+{
+ return 0 ;
+}
+#else
+#define puv3_i2c_suspend NULL
+#define puv3_i2c_resume NULL
+#endif
+
+MODULE_ALIAS("platform:puv3_i2c");
+
+static struct platform_driver puv3_i2c_driver = {
+ .probe = puv3_i2c_probe,
+ .remove = __devexit_p(puv3_i2c_remove),
+ .suspend = puv3_i2c_suspend,
+ .resume = puv3_i2c_resume,
+ .driver = {
+ .name = "PKUnity-v3-I2C",
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init puv3_i2c_init(void)
+{
+ return platform_driver_register(&puv3_i2c_driver);
+}
+
+static void __exit puv3_i2c_exit(void)
+{
+ platform_driver_unregister(&puv3_i2c_driver);
+}
+
+module_init(puv3_i2c_init);
+module_exit(puv3_i2c_exit);
+
+MODULE_DESCRIPTION("PKUnity v3 I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/serio/i8042-unicore32io.h b/drivers/input/serio/i8042-unicore32io.h
new file mode 100644
index 00000000000..73f5cc124a3
--- /dev/null
+++ b/drivers/input/serio/i8042-unicore32io.h
@@ -0,0 +1,73 @@
+/*
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2011 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _I8042_UNICORE32_H
+#define _I8042_UNICORE32_H
+
+#include <mach/hardware.h>
+
+/*
+ * Names.
+ */
+#define I8042_KBD_PHYS_DESC "isa0060/serio0"
+#define I8042_AUX_PHYS_DESC "isa0060/serio1"
+#define I8042_MUX_PHYS_DESC "isa0060/serio%d"
+
+/*
+ * IRQs.
+ */
+#define I8042_KBD_IRQ IRQ_PS2_KBD
+#define I8042_AUX_IRQ IRQ_PS2_AUX
+
+/*
+ * Register numbers.
+ */
+#define I8042_COMMAND_REG PS2_COMMAND
+#define I8042_STATUS_REG PS2_STATUS
+#define I8042_DATA_REG PS2_DATA
+
+#define I8042_REGION_START (resource_size_t)(PS2_DATA)
+#define I8042_REGION_SIZE (resource_size_t)(16)
+
+static inline int i8042_read_data(void)
+{
+ return readb(I8042_DATA_REG);
+}
+
+static inline int i8042_read_status(void)
+{
+ return readb(I8042_STATUS_REG);
+}
+
+static inline void i8042_write_data(int val)
+{
+ writeb(val, I8042_DATA_REG);
+}
+
+static inline void i8042_write_command(int val)
+{
+ writeb(val, I8042_COMMAND_REG);
+}
+
+static inline int i8042_platform_init(void)
+{
+ if (!request_mem_region(I8042_REGION_START, I8042_REGION_SIZE, "i8042"))
+ return -EBUSY;
+
+ i8042_reset = 1;
+ return 0;
+}
+
+static inline void i8042_platform_exit(void)
+{
+ release_mem_region(I8042_REGION_START, I8042_REGION_SIZE);
+}
+
+#endif /* _I8042_UNICORE32_H */
diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h
index ac1d759d0f5..3452708fbe3 100644
--- a/drivers/input/serio/i8042.h
+++ b/drivers/input/serio/i8042.h
@@ -26,6 +26,8 @@
#include "i8042-sparcio.h"
#elif defined(CONFIG_X86) || defined(CONFIG_IA64)
#include "i8042-x86ia64io.h"
+#elif defined(CONFIG_UNICORE32)
+#include "i8042-unicore32io.h"
#else
#include "i8042-io.h"
#endif
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 98e6fdf34d3..77cf813ba26 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_PCI_IOV) += iov.o
obj-$(CONFIG_X86) += setup-bus.o
obj-$(CONFIG_ALPHA) += setup-bus.o setup-irq.o
obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o
+obj-$(CONFIG_UNICORE32) += setup-bus.o setup-irq.o
obj-$(CONFIG_PARISC) += setup-bus.o
obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o
obj-$(CONFIG_PPC) += setup-bus.o
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index e6791f7ecfb..2a753f1e918 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2303,6 +2303,17 @@ config FB_JZ4740
help
Framebuffer support for the JZ4740 SoC.
+config FB_PUV3_UNIGFX
+ tristate "PKUnity v3 Unigfx framebuffer support"
+ depends on FB && UNICORE32 && ARCH_PUV3
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ help
+ Choose this option if you want to use the Unigfx device as a
+ framebuffer device. Without the support of PCI & AGP.
+
source "drivers/video/omap/Kconfig"
source "drivers/video/omap2/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 8c8fabdff9d..b0eb3da2467 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -139,6 +139,7 @@ obj-$(CONFIG_FB_MB862XX) += mb862xx/
obj-$(CONFIG_FB_MSM) += msm/
obj-$(CONFIG_FB_NUC900) += nuc900fb.o
obj-$(CONFIG_FB_JZ4740) += jz4740_fb.o
+obj-$(CONFIG_FB_PUV3_UNIGFX) += fb-puv3.o
# Platform or fallback drivers go here
obj-$(CONFIG_FB_UVESA) += uvesafb.o
diff --git a/drivers/video/fb-puv3.c b/drivers/video/fb-puv3.c
new file mode 100644
index 00000000000..dbd2dc4745d
--- /dev/null
+++ b/drivers/video/fb-puv3.c
@@ -0,0 +1,846 @@
+/*
+ * Frame Buffer Driver for PKUnity-v3 Unigfx
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/vmalloc.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/console.h>
+
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+
+/* Platform_data reserved for unifb registers. */
+#define UNIFB_REGS_NUM 10
+/* RAM reserved for the frame buffer. */
+#define UNIFB_MEMSIZE (SZ_4M) /* 4 MB for 1024*768*32b */
+
+/*
+ * cause UNIGFX don not have EDID
+ * all the modes are organized as follow
+ */
+static const struct fb_videomode unifb_modes[] = {
+ /* 0 640x480-60 VESA */
+ { "640x480@60", 60, 640, 480, 25175000, 48, 16, 34, 10, 96, 1,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 1 640x480-75 VESA */
+ { "640x480@75", 75, 640, 480, 31500000, 120, 16, 18, 1, 64, 1,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 2 800x600-60 VESA */
+ { "800x600@60", 60, 800, 600, 40000000, 88, 40, 26, 1, 128, 1,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 3 800x600-75 VESA */
+ { "800x600@75", 75, 800, 600, 49500000, 160, 16, 23, 1, 80, 1,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 4 1024x768-60 VESA */
+ { "1024x768@60", 60, 1024, 768, 65000000, 160, 24, 34, 3, 136, 1,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 5 1024x768-75 VESA */
+ { "1024x768@75", 75, 1024, 768, 78750000, 176, 16, 30, 1, 96, 1,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 6 1280x960-60 VESA */
+ { "1280x960@60", 60, 1280, 960, 108000000, 312, 96, 38, 1, 112, 1,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 7 1440x900-60 VESA */
+ { "1440x900@60", 60, 1440, 900, 106500000, 232, 80, 30, 3, 152, 1,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 8 FIXME 9 1024x600-60 VESA UNTESTED */
+ { "1024x600@60", 60, 1024, 600, 50650000, 160, 24, 26, 1, 136, 1,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 9 FIXME 10 1024x600-75 VESA UNTESTED */
+ { "1024x600@75", 75, 1024, 600, 61500000, 176, 16, 23, 1, 96, 1,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+ /* 10 FIXME 11 1366x768-60 VESA UNTESTED */
+ { "1366x768@60", 60, 1366, 768, 85500000, 256, 58, 18, 1, 112, 3,
+ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+};
+
+static struct fb_var_screeninfo unifb_default = {
+ .xres = 640,
+ .yres = 480,
+ .xres_virtual = 640,
+ .yres_virtual = 480,
+ .bits_per_pixel = 16,
+ .red = { 11, 5, 0 },
+ .green = { 5, 6, 0 },
+ .blue = { 0, 5, 0 },
+ .activate = FB_ACTIVATE_NOW,
+ .height = -1,
+ .width = -1,
+ .pixclock = 25175000,
+ .left_margin = 48,
+ .right_margin = 16,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
+
+static struct fb_fix_screeninfo unifb_fix = {
+ .id = "UNIGFX FB",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .xpanstep = 1,
+ .ypanstep = 1,
+ .ywrapstep = 1,
+ .accel = FB_ACCEL_NONE,
+};
+
+static void unifb_sync(struct fb_info *info)
+{
+ /* TODO: may, this can be replaced by interrupt */
+ int cnt;
+
+ for (cnt = 0; cnt < 0x10000000; cnt++) {
+ if (readl(UGE_COMMAND) & 0x1000000)
+ return;
+ }
+
+ if (cnt > 0x8000000)
+ dev_warn(info->device, "Warning: UniGFX GE time out ...\n");
+}
+
+static void unifb_prim_fillrect(struct fb_info *info,
+ const struct fb_fillrect *region)
+{
+ int awidth = region->width;
+ int aheight = region->height;
+ int m_iBpp = info->var.bits_per_pixel;
+ int screen_width = info->var.xres;
+ int src_sel = 1; /* from fg_color */
+ int pat_sel = 1;
+ int src_x0 = 0;
+ int dst_x0 = region->dx;
+ int src_y0 = 0;
+ int dst_y0 = region->dy;
+ int rop_alpha_sel = 0;
+ int rop_alpha_code = 0xCC;
+ int x_dir = 1;
+ int y_dir = 1;
+ int alpha_r = 0;
+ int alpha_sel = 0;
+ int dst_pitch = screen_width * (m_iBpp / 8);
+ int dst_offset = dst_y0 * dst_pitch + dst_x0 * (m_iBpp / 8);
+ int src_pitch = screen_width * (m_iBpp / 8);
+ int src_offset = src_y0 * src_pitch + src_x0 * (m_iBpp / 8);
+ unsigned int command = 0;
+ int clip_region = 0;
+ int clip_en = 0;
+ int tp_en = 0;
+ int fg_color = 0;
+ int bottom = info->var.yres - 1;
+ int right = info->var.xres - 1;
+ int top = 0;
+
+ bottom = (bottom << 16) | right;
+ command = (rop_alpha_sel << 26) | (pat_sel << 18) | (src_sel << 16)
+ | (x_dir << 20) | (y_dir << 21) | (command << 24)
+ | (clip_region << 23) | (clip_en << 22) | (tp_en << 27);
+ src_pitch = (dst_pitch << 16) | src_pitch;
+ awidth = awidth | (aheight << 16);
+ alpha_r = ((rop_alpha_code & 0xff) << 8) | (alpha_r & 0xff)
+ | (alpha_sel << 16);
+ src_x0 = (src_x0 & 0x1fff) | ((src_y0 & 0x1fff) << 16);
+ dst_x0 = (dst_x0 & 0x1fff) | ((dst_y0 & 0x1fff) << 16);
+ fg_color = region->color;
+
+ unifb_sync(info);
+
+ writel(((u32 *)(info->pseudo_palette))[fg_color], UGE_FCOLOR);
+ writel(0, UGE_BCOLOR);
+ writel(src_pitch, UGE_PITCH);
+ writel(src_offset, UGE_SRCSTART);
+ writel(dst_offset, UGE_DSTSTART);
+ writel(awidth, UGE_WIDHEIGHT);
+ writel(top, UGE_CLIP0);
+ writel(bottom, UGE_CLIP1);
+ writel(alpha_r, UGE_ROPALPHA);
+ writel(src_x0, UGE_SRCXY);
+ writel(dst_x0, UGE_DSTXY);
+ writel(command, UGE_COMMAND);
+}
+
+static void unifb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *region)
+{
+ struct fb_fillrect modded;
+ int vxres, vyres;
+
+ if (info->flags & FBINFO_HWACCEL_DISABLED) {
+ sys_fillrect(info, region);
+ return;
+ }
+
+ vxres = info->var.xres_virtual;
+ vyres = info->var.yres_virtual;
+
+ memcpy(&modded, region, sizeof(struct fb_fillrect));
+
+ if (!modded.width || !modded.height ||
+ modded.dx >= vxres || modded.dy >= vyres)
+ return;
+
+ if (modded.dx + modded.width > vxres)
+ modded.width = vxres - modded.dx;
+ if (modded.dy + modded.height > vyres)
+ modded.height = vyres - modded.dy;
+
+ unifb_prim_fillrect(info, &modded);
+}
+
+static void unifb_prim_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+ int awidth = area->width;
+ int aheight = area->height;
+ int m_iBpp = info->var.bits_per_pixel;
+ int screen_width = info->var.xres;
+ int src_sel = 2; /* from mem */
+ int pat_sel = 0;
+ int src_x0 = area->sx;
+ int dst_x0 = area->dx;
+ int src_y0 = area->sy;
+ int dst_y0 = area->dy;
+
+ int rop_alpha_sel = 0;
+ int rop_alpha_code = 0xCC;
+ int x_dir = 1;
+ int y_dir = 1;
+
+ int alpha_r = 0;
+ int alpha_sel = 0;
+ int dst_pitch = screen_width * (m_iBpp / 8);
+ int dst_offset = dst_y0 * dst_pitch + dst_x0 * (m_iBpp / 8);
+ int src_pitch = screen_width * (m_iBpp / 8);
+ int src_offset = src_y0 * src_pitch + src_x0 * (m_iBpp / 8);
+ unsigned int command = 0;
+ int clip_region = 0;
+ int clip_en = 1;
+ int tp_en = 0;
+ int top = 0;
+ int bottom = info->var.yres;
+ int right = info->var.xres;
+ int fg_color = 0;
+ int bg_color = 0;
+
+ if (src_x0 < 0)
+ src_x0 = 0;
+ if (src_y0 < 0)
+ src_y0 = 0;
+
+ if (src_y0 - dst_y0 > 0) {
+ y_dir = 1;
+ } else {
+ y_dir = 0;
+ src_offset = (src_y0 + aheight) * src_pitch +
+ src_x0 * (m_iBpp / 8);
+ dst_offset = (dst_y0 + aheight) * dst_pitch +
+ dst_x0 * (m_iBpp / 8);
+ src_y0 += aheight;
+ dst_y0 += aheight;
+ }
+
+ command = (rop_alpha_sel << 26) | (pat_sel << 18) | (src_sel << 16) |
+ (x_dir << 20) | (y_dir << 21) | (command << 24) |
+ (clip_region << 23) | (clip_en << 22) | (tp_en << 27);
+ src_pitch = (dst_pitch << 16) | src_pitch;
+ awidth = awidth | (aheight << 16);
+ alpha_r = ((rop_alpha_code & 0xff) << 8) | (alpha_r & 0xff) |
+ (alpha_sel << 16);
+ src_x0 = (src_x0 & 0x1fff) | ((src_y0 & 0x1fff) << 16);
+ dst_x0 = (dst_x0 & 0x1fff) | ((dst_y0 & 0x1fff) << 16);
+ bottom = (bottom << 16) | right;
+
+ unifb_sync(info);
+
+ writel(src_pitch, UGE_PITCH);
+ writel(src_offset, UGE_SRCSTART);
+ writel(dst_offset, UGE_DSTSTART);
+ writel(awidth, UGE_WIDHEIGHT);
+ writel(top, UGE_CLIP0);
+ writel(bottom, UGE_CLIP1);
+ writel(bg_color, UGE_BCOLOR);
+ writel(fg_color, UGE_FCOLOR);
+ writel(alpha_r, UGE_ROPALPHA);
+ writel(src_x0, UGE_SRCXY);
+ writel(dst_x0, UGE_DSTXY);
+ writel(command, UGE_COMMAND);
+}
+
+static void unifb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+ struct fb_copyarea modded;
+ u32 vxres, vyres;
+ modded.sx = area->sx;
+ modded.sy = area->sy;
+ modded.dx = area->dx;
+ modded.dy = area->dy;
+ modded.width = area->width;
+ modded.height = area->height;
+
+ if (info->flags & FBINFO_HWACCEL_DISABLED) {
+ sys_copyarea(info, area);
+ return;
+ }
+
+ vxres = info->var.xres_virtual;
+ vyres = info->var.yres_virtual;
+
+ if (!modded.width || !modded.height ||
+ modded.sx >= vxres || modded.sy >= vyres ||
+ modded.dx >= vxres || modded.dy >= vyres)
+ return;
+
+ if (modded.sx + modded.width > vxres)
+ modded.width = vxres - modded.sx;
+ if (modded.dx + modded.width > vxres)
+ modded.width = vxres - modded.dx;
+ if (modded.sy + modded.height > vyres)
+ modded.height = vyres - modded.sy;
+ if (modded.dy + modded.height > vyres)
+ modded.height = vyres - modded.dy;
+
+ unifb_prim_copyarea(info, &modded);
+}
+
+static void unifb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+ sys_imageblit(info, image);
+}
+
+static u_long get_line_length(int xres_virtual, int bpp)
+{
+ u_long length;
+
+ length = xres_virtual * bpp;
+ length = (length + 31) & ~31;
+ length >>= 3;
+ return length;
+}
+
+/*
+ * Setting the video mode has been split into two parts.
+ * First part, xxxfb_check_var, must not write anything
+ * to hardware, it should only verify and adjust var.
+ * This means it doesn't alter par but it does use hardware
+ * data from it to check this var.
+ */
+static int unifb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ u_long line_length;
+
+ /*
+ * FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
+ * as FB_VMODE_SMOOTH_XPAN is only used internally
+ */
+
+ if (var->vmode & FB_VMODE_CONUPDATE) {
+ var->vmode |= FB_VMODE_YWRAP;
+ var->xoffset = info->var.xoffset;
+ var->yoffset = info->var.yoffset;
+ }
+
+ /*
+ * Some very basic checks
+ */
+ if (!var->xres)
+ var->xres = 1;
+ if (!var->yres)
+ var->yres = 1;
+ if (var->xres > var->xres_virtual)
+ var->xres_virtual = var->xres;
+ if (var->yres > var->yres_virtual)
+ var->yres_virtual = var->yres;
+ if (var->bits_per_pixel <= 1)
+ var->bits_per_pixel = 1;
+ else if (var->bits_per_pixel <= 8)
+ var->bits_per_pixel = 8;
+ else if (var->bits_per_pixel <= 16)
+ var->bits_per_pixel = 16;
+ else if (var->bits_per_pixel <= 24)
+ var->bits_per_pixel = 24;
+ else if (var->bits_per_pixel <= 32)
+ var->bits_per_pixel = 32;
+ else
+ return -EINVAL;
+
+ if (var->xres_virtual < var->xoffset + var->xres)
+ var->xres_virtual = var->xoffset + var->xres;
+ if (var->yres_virtual < var->yoffset + var->yres)
+ var->yres_virtual = var->yoffset + var->yres;
+
+ /*
+ * Memory limit
+ */
+ line_length =
+ get_line_length(var->xres_virtual, var->bits_per_pixel);
+ if (line_length * var->yres_virtual > UNIFB_MEMSIZE)
+ return -ENOMEM;
+
+ /*
+ * Now that we checked it we alter var. The reason being is that the
+ * video mode passed in might not work but slight changes to it might
+ * make it work. This way we let the user know what is acceptable.
+ */
+ switch (var->bits_per_pixel) {
+ case 1:
+ case 8:
+ var->red.offset = 0;
+ var->red.length = 8;
+ var->green.offset = 0;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+ case 16: /* RGBA 5551 */
+ if (var->transp.length) {
+ var->red.offset = 0;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 5;
+ var->blue.offset = 10;
+ var->blue.length = 5;
+ var->transp.offset = 15;
+ var->transp.length = 1;
+ } else { /* RGB 565 */
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 6;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ }
+ break;
+ case 24: /* RGB 888 */
+ var->red.offset = 0;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.offset = 16;
+ var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+ case 32: /* RGBA 8888 */
+ var->red.offset = 16;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ var->transp.offset = 24;
+ var->transp.length = 8;
+ break;
+ }
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+ var->transp.msb_right = 0;
+
+ return 0;
+}
+
+/*
+ * This routine actually sets the video mode. It's in here where we
+ * the hardware state info->par and fix which can be affected by the
+ * change in par. For this driver it doesn't do much.
+ */
+static int unifb_set_par(struct fb_info *info)
+{
+ int hTotal, vTotal, hSyncStart, hSyncEnd, vSyncStart, vSyncEnd;
+ int format;
+
+#ifdef CONFIG_PUV3_PM
+ struct clk *clk_vga;
+ u32 pixclk = 0;
+ int i;
+
+ for (i = 0; i <= 10; i++) {
+ if (info->var.xres == unifb_modes[i].xres
+ && info->var.yres == unifb_modes[i].yres
+ && info->var.upper_margin == unifb_modes[i].upper_margin
+ && info->var.lower_margin == unifb_modes[i].lower_margin
+ && info->var.left_margin == unifb_modes[i].left_margin
+ && info->var.right_margin == unifb_modes[i].right_margin
+ && info->var.hsync_len == unifb_modes[i].hsync_len
+ && info->var.vsync_len == unifb_modes[i].vsync_len) {
+ pixclk = unifb_modes[i].pixclock;
+ break;
+ }
+ }
+
+ /* set clock rate */
+ clk_vga = clk_get(info->device, "VGA_CLK");
+ if (clk_vga == ERR_PTR(-ENOENT))
+ return -ENOENT;
+
+ if (pixclk != 0) {
+ if (clk_set_rate(clk_vga, pixclk)) { /* set clock failed */
+ info->fix = unifb_fix;
+ info->var = unifb_default;
+ if (clk_set_rate(clk_vga, unifb_default.pixclock))
+ return -EINVAL;
+ }
+ }
+#endif
+
+ info->fix.line_length = get_line_length(info->var.xres_virtual,
+ info->var.bits_per_pixel);
+
+ hSyncStart = info->var.xres + info->var.right_margin;
+ hSyncEnd = hSyncStart + info->var.hsync_len;
+ hTotal = hSyncEnd + info->var.left_margin;
+
+ vSyncStart = info->var.yres + info->var.lower_margin;
+ vSyncEnd = vSyncStart + info->var.vsync_len;
+ vTotal = vSyncEnd + info->var.upper_margin;
+
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ format = UDE_CFG_DST8;
+ break;
+ case 16:
+ format = UDE_CFG_DST16;
+ break;
+ case 24:
+ format = UDE_CFG_DST24;
+ break;
+ case 32:
+ format = UDE_CFG_DST32;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ writel(PKUNITY_UNIGFX_MMAP_BASE, UDE_FSA);
+ writel(info->var.yres, UDE_LS);
+ writel(get_line_length(info->var.xres,
+ info->var.bits_per_pixel) >> 3, UDE_PS);
+ /* >> 3 for hardware required. */
+ writel((hTotal << 16) | (info->var.xres), UDE_HAT);
+ writel(((hTotal - 1) << 16) | (info->var.xres - 1), UDE_HBT);
+ writel(((hSyncEnd - 1) << 16) | (hSyncStart - 1), UDE_HST);
+ writel((vTotal << 16) | (info->var.yres), UDE_VAT);
+ writel(((vTotal - 1) << 16) | (info->var.yres - 1), UDE_VBT);
+ writel(((vSyncEnd - 1) << 16) | (vSyncStart - 1), UDE_VST);
+ writel(UDE_CFG_GDEN_ENABLE | UDE_CFG_TIMEUP_ENABLE
+ | format | 0xC0000001, UDE_CFG);
+
+ return 0;
+}
+
+/*
+ * Set a single color register. The values supplied are already
+ * rounded down to the hardware's capabilities (according to the
+ * entries in the var structure). Return != 0 for invalid regno.
+ */
+static int unifb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int transp, struct fb_info *info)
+{
+ if (regno >= 256) /* no. of hw registers */
+ return 1;
+
+ /* grayscale works only partially under directcolor */
+ if (info->var.grayscale) {
+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+ red = green = blue =
+ (red * 77 + green * 151 + blue * 28) >> 8;
+ }
+
+#define CNVT_TOHW(val, width) ((((val)<<(width))+0x7FFF-(val))>>16)
+ switch (info->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ case FB_VISUAL_PSEUDOCOLOR:
+ red = CNVT_TOHW(red, info->var.red.length);
+ green = CNVT_TOHW(green, info->var.green.length);
+ blue = CNVT_TOHW(blue, info->var.blue.length);
+ transp = CNVT_TOHW(transp, info->var.transp.length);
+ break;
+ case FB_VISUAL_DIRECTCOLOR:
+ red = CNVT_TOHW(red, 8); /* expect 8 bit DAC */
+ green = CNVT_TOHW(green, 8);
+ blue = CNVT_TOHW(blue, 8);
+ /* hey, there is bug in transp handling... */
+ transp = CNVT_TOHW(transp, 8);
+ break;
+ }
+#undef CNVT_TOHW
+ /* Truecolor has hardware independent palette */
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+ u32 v;
+
+ if (regno >= 16)
+ return 1;
+
+ v = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset) |
+ (transp << info->var.transp.offset);
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ break;
+ case 16:
+ case 24:
+ case 32:
+ ((u32 *) (info->pseudo_palette))[regno] = v;
+ break;
+ default:
+ return 1;
+ }
+ return 0;
+ }
+ return 0;
+}
+
+/*
+ * Pan or Wrap the Display
+ *
+ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
+ */
+static int unifb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ if (var->vmode & FB_VMODE_YWRAP) {
+ if (var->yoffset < 0
+ || var->yoffset >= info->var.yres_virtual
+ || var->xoffset)
+ return -EINVAL;
+ } else {
+ if (var->xoffset + var->xres > info->var.xres_virtual ||
+ var->yoffset + var->yres > info->var.yres_virtual)
+ return -EINVAL;
+ }
+ info->var.xoffset = var->xoffset;
+ info->var.yoffset = var->yoffset;
+ if (var->vmode & FB_VMODE_YWRAP)
+ info->var.vmode |= FB_VMODE_YWRAP;
+ else
+ info->var.vmode &= ~FB_VMODE_YWRAP;
+ return 0;
+}
+
+int unifb_mmap(struct fb_info *info,
+ struct vm_area_struct *vma)
+{
+ unsigned long size = vma->vm_end - vma->vm_start;
+ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+ unsigned long pos = info->fix.smem_start + offset;
+
+ if (offset + size > info->fix.smem_len)
+ return -EINVAL;
+
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ if (io_remap_pfn_range(vma, vma->vm_start, pos >> PAGE_SHIFT, size,
+ vma->vm_page_prot))
+ return -EAGAIN;
+
+ vma->vm_flags |= VM_RESERVED; /* avoid to swap out this VMA */
+ return 0;
+
+}
+
+static struct fb_ops unifb_ops = {
+ .fb_read = fb_sys_read,
+ .fb_write = fb_sys_write,
+ .fb_check_var = unifb_check_var,
+ .fb_set_par = unifb_set_par,
+ .fb_setcolreg = unifb_setcolreg,
+ .fb_pan_display = unifb_pan_display,
+ .fb_fillrect = unifb_fillrect,
+ .fb_copyarea = unifb_copyarea,
+ .fb_imageblit = unifb_imageblit,
+ .fb_mmap = unifb_mmap,
+};
+
+/*
+ * Initialisation
+ */
+static int unifb_probe(struct platform_device *dev)
+{
+ struct fb_info *info;
+ u32 unifb_regs[UNIFB_REGS_NUM];
+ int retval = -ENOMEM;
+ struct resource *iomem, *mapmem;
+
+ info = framebuffer_alloc(sizeof(u32)*256, &dev->dev);
+ if (!info)
+ goto err;
+
+ info->screen_base = (char __iomem *)KUSER_UNIGFX_BASE;
+ info->fbops = &unifb_ops;
+
+ retval = fb_find_mode(&info->var, info, NULL,
+ unifb_modes, 10, &unifb_modes[0], 16);
+
+ if (!retval || (retval == 4))
+ info->var = unifb_default;
+
+ iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ unifb_fix.mmio_start = iomem->start;
+
+ mapmem = platform_get_resource(dev, IORESOURCE_MEM, 1);
+ unifb_fix.smem_start = mapmem->start;
+ unifb_fix.smem_len = UNIFB_MEMSIZE;
+
+ info->fix = unifb_fix;
+ info->pseudo_palette = info->par;
+ info->par = NULL;
+ info->flags = FBINFO_FLAG_DEFAULT;
+#ifdef FB_ACCEL_PUV3_UNIGFX
+ info->fix.accel = FB_ACCEL_PUV3_UNIGFX;
+#endif
+
+ retval = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (retval < 0)
+ goto err1;
+
+ retval = register_framebuffer(info);
+ if (retval < 0)
+ goto err2;
+ platform_set_drvdata(dev, info);
+ platform_device_add_data(dev, unifb_regs, sizeof(u32) * UNIFB_REGS_NUM);
+
+ printk(KERN_INFO
+ "fb%d: Virtual frame buffer device, using %dM of video memory\n",
+ info->node, UNIFB_MEMSIZE >> 20);
+ return 0;
+err2:
+ fb_dealloc_cmap(&info->cmap);
+err1:
+ framebuffer_release(info);
+err:
+ return retval;
+}
+
+static int unifb_remove(struct platform_device *dev)
+{
+ struct fb_info *info = platform_get_drvdata(dev);
+
+ if (info) {
+ unregister_framebuffer(info);
+ fb_dealloc_cmap(&info->cmap);
+ framebuffer_release(info);
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int unifb_resume(struct platform_device *dev)
+{
+ int rc = 0;
+ u32 *unifb_regs = dev->dev.platform_data;
+
+ if (dev->dev.power.power_state.event == PM_EVENT_ON)
+ return 0;
+
+ console_lock();
+
+ if (dev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+ writel(unifb_regs[0], UDE_FSA);
+ writel(unifb_regs[1], UDE_LS);
+ writel(unifb_regs[2], UDE_PS);
+ writel(unifb_regs[3], UDE_HAT);
+ writel(unifb_regs[4], UDE_HBT);
+ writel(unifb_regs[5], UDE_HST);
+ writel(unifb_regs[6], UDE_VAT);
+ writel(unifb_regs[7], UDE_VBT);
+ writel(unifb_regs[8], UDE_VST);
+ writel(unifb_regs[9], UDE_CFG);
+ }
+ dev->dev.power.power_state = PMSG_ON;
+
+ console_unlock();
+
+ return rc;
+}
+
+static int unifb_suspend(struct platform_device *dev, pm_message_t mesg)
+{
+ u32 *unifb_regs = dev->dev.platform_data;
+
+ unifb_regs[0] = readl(UDE_FSA);
+ unifb_regs[1] = readl(UDE_LS);
+ unifb_regs[2] = readl(UDE_PS);
+ unifb_regs[3] = readl(UDE_HAT);
+ unifb_regs[4] = readl(UDE_HBT);
+ unifb_regs[5] = readl(UDE_HST);
+ unifb_regs[6] = readl(UDE_VAT);
+ unifb_regs[7] = readl(UDE_VBT);
+ unifb_regs[8] = readl(UDE_VST);
+ unifb_regs[9] = readl(UDE_CFG);
+
+ if (mesg.event == dev->dev.power.power_state.event)
+ return 0;
+
+ switch (mesg.event) {
+ case PM_EVENT_FREEZE: /* about to take snapshot */
+ case PM_EVENT_PRETHAW: /* before restoring snapshot */
+ goto done;
+ }
+
+ console_lock();
+
+ /* do nothing... */
+
+ console_unlock();
+
+done:
+ dev->dev.power.power_state = mesg;
+
+ return 0;
+}
+#else
+#define unifb_resume NULL
+#define unifb_suspend NULL
+#endif
+
+static struct platform_driver unifb_driver = {
+ .probe = unifb_probe,
+ .remove = unifb_remove,
+ .resume = unifb_resume,
+ .suspend = unifb_suspend,
+ .driver = {
+ .name = "PKUnity-v3-UNIGFX",
+ },
+};
+
+static int __init unifb_init(void)
+{
+#ifndef MODULE
+ if (fb_get_options("unifb", NULL))
+ return -ENODEV;
+#endif
+
+ return platform_driver_register(&unifb_driver);
+}
+
+module_init(unifb_init);
+
+static void __exit unifb_exit(void)
+{
+ platform_driver_unregister(&unifb_driver);
+}
+
+module_exit(unifb_exit);
+
+MODULE_LICENSE("GPL v2");
diff --git a/include/asm-generic/ftrace.h b/include/asm-generic/ftrace.h
new file mode 100644
index 00000000000..51abba9ea7a
--- /dev/null
+++ b/include/asm-generic/ftrace.h
@@ -0,0 +1,16 @@
+/*
+ * linux/include/asm-generic/ftrace.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_GENERIC_FTRACE_H__
+#define __ASM_GENERIC_FTRACE_H__
+
+/*
+ * Not all architectures need their own ftrace.h, the most
+ * common definitions are already in linux/ftrace.h.
+ */
+
+#endif /* __ASM_GENERIC_FTRACE_H__ */
diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
index 4644c9a7f72..e0ffa3ddb02 100644
--- a/include/asm-generic/io.h
+++ b/include/asm-generic/io.h
@@ -94,6 +94,10 @@ static inline void __raw_writeq(u64 b, volatile void __iomem *addr)
#define writeq(b,addr) __raw_writeq(__cpu_to_le64(b),addr)
#endif
+#ifndef PCI_IOBASE
+#define PCI_IOBASE ((void __iomem *) 0)
+#endif
+
/*****************************************************************************/
/*
* traditional input/output functions
@@ -101,32 +105,32 @@ static inline void __raw_writeq(u64 b, volatile void __iomem *addr)
static inline u8 inb(unsigned long addr)
{
- return readb((volatile void __iomem *) addr);
+ return readb(addr + PCI_IOBASE);
}
static inline u16 inw(unsigned long addr)
{
- return readw((volatile void __iomem *) addr);
+ return readw(addr + PCI_IOBASE);
}
static inline u32 inl(unsigned long addr)
{
- return readl((volatile void __iomem *) addr);
+ return readl(addr + PCI_IOBASE);
}
static inline void outb(u8 b, unsigned long addr)
{
- writeb(b, (volatile void __iomem *) addr);
+ writeb(b, addr + PCI_IOBASE);
}
static inline void outw(u16 b, unsigned long addr)
{
- writew(b, (volatile void __iomem *) addr);
+ writew(b, addr + PCI_IOBASE);
}
static inline void outl(u32 b, unsigned long addr)
{
- writel(b, (volatile void __iomem *) addr);
+ writel(b, addr + PCI_IOBASE);
}
#define inb_p(addr) inb(addr)
@@ -213,32 +217,32 @@ static inline void outsl(unsigned long addr, const void *buffer, int count)
static inline void readsl(const void __iomem *addr, void *buf, int len)
{
- insl((unsigned long)addr, buf, len);
+ insl(addr - PCI_IOBASE, buf, len);
}
static inline void readsw(const void __iomem *addr, void *buf, int len)
{
- insw((unsigned long)addr, buf, len);
+ insw(addr - PCI_IOBASE, buf, len);
}
static inline void readsb(const void __iomem *addr, void *buf, int len)
{
- insb((unsigned long)addr, buf, len);
+ insb(addr - PCI_IOBASE, buf, len);
}
static inline void writesl(const void __iomem *addr, const void *buf, int len)
{
- outsl((unsigned long)addr, buf, len);
+ outsl(addr - PCI_IOBASE, buf, len);
}
static inline void writesw(const void __iomem *addr, const void *buf, int len)
{
- outsw((unsigned long)addr, buf, len);
+ outsw(addr - PCI_IOBASE, buf, len);
}
static inline void writesb(const void __iomem *addr, const void *buf, int len)
{
- outsb((unsigned long)addr, buf, len);
+ outsb(addr - PCI_IOBASE, buf, len);
}
#ifndef CONFIG_GENERIC_IOMAP
@@ -269,8 +273,9 @@ static inline void writesb(const void __iomem *addr, const void *buf, int len)
outsl((unsigned long) (p), (src), (count))
#endif /* CONFIG_GENERIC_IOMAP */
-
-#define IO_SPACE_LIMIT 0xffffffff
+#ifndef IO_SPACE_LIMIT
+#define IO_SPACE_LIMIT 0xffff
+#endif
#ifdef __KERNEL__
diff --git a/include/asm-generic/sizes.h b/include/asm-generic/sizes.h
new file mode 100644
index 00000000000..ea5d4ef8106
--- /dev/null
+++ b/include/asm-generic/sizes.h
@@ -0,0 +1,47 @@
+/*
+ * linux/include/asm-generic/sizes.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_GENERIC_SIZES_H__
+#define __ASM_GENERIC_SIZES_H__
+
+#define SZ_1 0x00000001
+#define SZ_2 0x00000002
+#define SZ_4 0x00000004
+#define SZ_8 0x00000008
+#define SZ_16 0x00000010
+#define SZ_32 0x00000020
+#define SZ_64 0x00000040
+#define SZ_128 0x00000080
+#define SZ_256 0x00000100
+#define SZ_512 0x00000200
+
+#define SZ_1K 0x00000400
+#define SZ_2K 0x00000800
+#define SZ_4K 0x00001000
+#define SZ_8K 0x00002000
+#define SZ_16K 0x00004000
+#define SZ_32K 0x00008000
+#define SZ_64K 0x00010000
+#define SZ_128K 0x00020000
+#define SZ_256K 0x00040000
+#define SZ_512K 0x00080000
+
+#define SZ_1M 0x00100000
+#define SZ_2M 0x00200000
+#define SZ_4M 0x00400000
+#define SZ_8M 0x00800000
+#define SZ_16M 0x01000000
+#define SZ_32M 0x02000000
+#define SZ_64M 0x04000000
+#define SZ_128M 0x08000000
+#define SZ_256M 0x10000000
+#define SZ_512M 0x20000000
+
+#define SZ_1G 0x40000000
+#define SZ_2G 0x80000000
+
+#endif /* __ASM_GENERIC_SIZES_H__ */
diff --git a/include/asm-generic/uaccess.h b/include/asm-generic/uaccess.h
index b218b8513d0..ac68c999b6c 100644
--- a/include/asm-generic/uaccess.h
+++ b/include/asm-generic/uaccess.h
@@ -288,14 +288,16 @@ strncpy_from_user(char *dst, const char __user *src, long count)
*
* Return 0 on exception, a value greater than N if too long
*/
-#ifndef strnlen_user
+#ifndef __strnlen_user
+#define __strnlen_user strnlen
+#endif
+
static inline long strnlen_user(const char __user *src, long n)
{
if (!access_ok(VERIFY_READ, src, 1))
return 0;
- return strlen((void * __force)src) + 1;
+ return __strnlen_user(src, n);
}
-#endif
static inline long strlen_user(const char __user *src)
{
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 68ba85a00c0..b2a36391d2a 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -152,6 +152,8 @@
#define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */
#define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */
+#define FB_ACCEL_PUV3_UNIGFX 0xa0 /* PKUnity-v3 Unigfx */
+
struct fb_fix_screeninfo {
char id[16]; /* identification string eg "TT Builtin" */
unsigned long smem_start; /* Start of frame buffer mem */