summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/usb/error-codes.txt6
-rw-r--r--drivers/usb/core/devio.c22
-rw-r--r--drivers/usb/core/urb.c7
3 files changed, 24 insertions, 11 deletions
diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt
index 9cf83e8c27b..d83703ea74b 100644
--- a/Documentation/usb/error-codes.txt
+++ b/Documentation/usb/error-codes.txt
@@ -41,8 +41,8 @@ USB-specific:
-EFBIG Host controller driver can't schedule that many ISO frames.
--EPIPE Specified endpoint is stalled. For non-control endpoints,
- reset this status with usb_clear_halt().
+-EPIPE The pipe type specified in the URB doesn't match the
+ endpoint's actual type.
-EMSGSIZE (a) endpoint maxpacket size is zero; it is not usable
in the current interface altsetting.
@@ -60,6 +60,8 @@ USB-specific:
-EHOSTUNREACH URB was rejected because the device is suspended.
+-ENOEXEC A control URB doesn't contain a Setup packet.
+
**************************************************************************
* Error codes returned by in urb->status *
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index a678186f218..431d17287a8 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1104,13 +1104,25 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
case USB_ENDPOINT_XFER_CONTROL:
case USB_ENDPOINT_XFER_ISOC:
return -EINVAL;
- /* allow single-shot interrupt transfers, at bogus rates */
+ case USB_ENDPOINT_XFER_INT:
+ /* allow single-shot interrupt transfers */
+ uurb->type = USBDEVFS_URB_TYPE_INTERRUPT;
+ goto interrupt_urb;
}
uurb->number_of_packets = 0;
if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
return -EINVAL;
break;
+ case USBDEVFS_URB_TYPE_INTERRUPT:
+ if (!usb_endpoint_xfer_int(&ep->desc))
+ return -EINVAL;
+ interrupt_urb:
+ uurb->number_of_packets = 0;
+ if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
+ return -EINVAL;
+ break;
+
case USBDEVFS_URB_TYPE_ISO:
/* arbitrary limit */
if (uurb->number_of_packets < 1 ||
@@ -1143,14 +1155,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
uurb->buffer_length = totlen;
break;
- case USBDEVFS_URB_TYPE_INTERRUPT:
- uurb->number_of_packets = 0;
- if (!usb_endpoint_xfer_int(&ep->desc))
- return -EINVAL;
- if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
- return -EINVAL;
- break;
-
default:
return -EINVAL;
}
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index e7cae133469..e2bd153cbd8 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -387,6 +387,13 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
{
unsigned int orig_flags = urb->transfer_flags;
unsigned int allowed;
+ static int pipetypes[4] = {
+ PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
+ };
+
+ /* Check that the pipe's type matches the endpoint's type */
+ if (usb_pipetype(urb->pipe) != pipetypes[xfertype])
+ return -EPIPE; /* The most suitable error code :-) */
/* enforce simple/standard policy */
allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP |