diff options
30 files changed, 2222 insertions, 344 deletions
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 7b4596ac412..d05730e99c1 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -542,7 +542,10 @@ Protocol: 2.08+ The payload may be compressed. The format of both the compressed and uncompressed data should be determined using the standard magic - numbers. Currently only gzip compressed ELF is used. + numbers. The currently supported compression formats are gzip + (magic numbers 1F 8B or 1F 9E), bzip2 (magic number 42 5A) and LZMA + (magic number 5D 00). The uncompressed payload is currently always ELF + (magic number 7F 45 4C 46). Field name: payload_length Type: read diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bc2fbadff9f..a2337683856 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -40,6 +40,9 @@ config X86 select HAVE_GENERIC_DMA_COHERENT if X86_32 select HAVE_EFFICIENT_UNALIGNED_ACCESS select USER_STACKTRACE_SUPPORT + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA config ARCH_DEFCONFIG string diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index 1771c804e02..3ca4c194b8e 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -4,7 +4,7 @@ # create a compressed vmlinux image from the original vmlinux # -targets := vmlinux vmlinux.bin vmlinux.bin.gz head_$(BITS).o misc.o piggy.o +targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC @@ -47,18 +47,35 @@ ifeq ($(CONFIG_X86_32),y) ifdef CONFIG_RELOCATABLE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE $(call if_changed,gzip) +$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin.all FORCE + $(call if_changed,bzip2) +$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE + $(call if_changed,lzma) else $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) +$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE + $(call if_changed,bzip2) +$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE + $(call if_changed,lzma) endif LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T else + $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) +$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE + $(call if_changed,bzip2) +$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE + $(call if_changed,lzma) LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T endif -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE +suffix_$(CONFIG_KERNEL_GZIP) = gz +suffix_$(CONFIG_KERNEL_BZIP2) = bz2 +suffix_$(CONFIG_KERNEL_LZMA) = lzma + +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE $(call if_changed,ld) diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index da062216948..e45be73684f 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -116,71 +116,13 @@ /* * gzip declarations */ - -#define OF(args) args #define STATIC static #undef memset #undef memcpy #define memzero(s, n) memset((s), 0, (n)) -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -/* - * Window size must be at least 32k, and a power of two. - * We don't actually have a window just a huge output buffer, - * so we report a 2G window size, as that should always be - * larger than our output buffer: - */ -#define WSIZE 0x80000000 - -/* Input buffer: */ -static unsigned char *inbuf; - -/* Sliding window buffer (and final output buffer): */ -static unsigned char *window; - -/* Valid bytes in inbuf: */ -static unsigned insize; - -/* Index of next byte to be processed in inbuf: */ -static unsigned inptr; - -/* Bytes in output buffer: */ -static unsigned outcnt; - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gz file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAM 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6, 7: reserved */ - -#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) - -/* Diagnostic functions */ -#ifdef DEBUG -# define Assert(cond, msg) do { if (!(cond)) error(msg); } while (0) -# define Trace(x) do { fprintf x; } while (0) -# define Tracev(x) do { if (verbose) fprintf x ; } while (0) -# define Tracevv(x) do { if (verbose > 1) fprintf x ; } while (0) -# define Tracec(c, x) do { if (verbose && (c)) fprintf x ; } while (0) -# define Tracecv(c, x) do { if (verbose > 1 && (c)) fprintf x ; } while (0) -#else -# define Assert(cond, msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c, x) -# define Tracecv(c, x) -#endif -static int fill_inbuf(void); -static void flush_window(void); static void error(char *m); /* @@ -189,13 +131,8 @@ static void error(char *m); static struct boot_params *real_mode; /* Pointer to real-mode data */ static int quiet; -extern unsigned char input_data[]; -extern int input_len; - -static long bytes_out; - static void *memset(void *s, int c, unsigned n); -static void *memcpy(void *dest, const void *src, unsigned n); +void *memcpy(void *dest, const void *src, unsigned n); static void __putstr(int, const char *); #define putstr(__x) __putstr(0, __x) @@ -213,7 +150,17 @@ static char *vidmem; static int vidport; static int lines, cols; -#include "../../../../lib/inflate.c" +#ifdef CONFIG_KERNEL_GZIP +#include "../../../../lib/decompress_inflate.c" +#endif + +#ifdef CONFIG_KERNEL_BZIP2 +#include "../../../../lib/decompress_bunzip2.c" +#endif + +#ifdef CONFIG_KERNEL_LZMA +#include "../../../../lib/decompress_unlzma.c" +#endif static void scroll(void) { @@ -282,7 +229,7 @@ static void *memset(void *s, int c, unsigned n) return s; } -static void *memcpy(void *dest, const void *src, unsigned n) +void *memcpy(void *dest, const void *src, unsigned n) { int i; const char *s = src; @@ -293,38 +240,6 @@ static void *memcpy(void *dest, const void *src, unsigned n) return dest; } -/* =========================================================================== - * Fill the input buffer. This is called only when the buffer is empty - * and at least one byte is really needed. - */ -static int fill_inbuf(void) -{ - error("ran out of input data"); - return 0; -} - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -static void flush_window(void) -{ - /* With my window equal to my output buffer - * I only need to compute the crc here. - */ - unsigned long c = crc; /* temporary variable */ - unsigned n; - unsigned char *in, ch; - - in = window; - for (n = 0; n < outcnt; n++) { - ch = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (unsigned long)outcnt; - outcnt = 0; -} static void error(char *x) { @@ -407,12 +322,8 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, lines = real_mode->screen_info.orig_video_lines; cols = real_mode->screen_info.orig_video_cols; - window = output; /* Output buffer (Normally at 1M) */ free_mem_ptr = heap; /* Heap */ free_mem_end_ptr = heap + BOOT_HEAP_SIZE; - inbuf = input_data; /* Input buffer */ - insize = input_len; - inptr = 0; #ifdef CONFIG_X86_64 if ((unsigned long)output & (__KERNEL_ALIGN - 1)) @@ -430,10 +341,9 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, #endif #endif - makecrc(); if (!quiet) putstr("\nDecompressing Linux... "); - gunzip(); + decompress(input_data, input_len, NULL, NULL, output, NULL, error); parse_elf(output); if (!quiet) putstr("done.\nBooting the kernel.\n"); diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h index dd61616cb73..6526cf08b0e 100644 --- a/arch/x86/include/asm/boot.h +++ b/arch/x86/include/asm/boot.h @@ -10,17 +10,31 @@ #define EXTENDED_VGA 0xfffe /* 80x50 mode */ #define ASK_VGA 0xfffd /* ask for it at bootup */ +#ifdef __KERNEL__ + /* Physical address where kernel should be loaded. */ #define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \ + (CONFIG_PHYSICAL_ALIGN - 1)) \ & ~(CONFIG_PHYSICAL_ALIGN - 1)) +#ifdef CONFIG_KERNEL_BZIP2 +#define BOOT_HEAP_SIZE 0x400000 +#else /* !CONFIG_KERNEL_BZIP2 */ + #ifdef CONFIG_X86_64 #define BOOT_HEAP_SIZE 0x7000 -#define BOOT_STACK_SIZE 0x4000 #else #define BOOT_HEAP_SIZE 0x4000 +#endif + +#endif /* !CONFIG_KERNEL_BZIP2 */ + +#ifdef CONFIG_X86_64 +#define BOOT_STACK_SIZE 0x4000 +#else #define BOOT_STACK_SIZE 0x1000 #endif +#endif /* __KERNEL__ */ + #endif /* _ASM_X86_BOOT_H */ diff --git a/include/linux/decompress/bunzip2.h b/include/linux/decompress/bunzip2.h new file mode 100644 index 00000000000..115272137a9 --- /dev/null +++ b/include/linux/decompress/bunzip2.h @@ -0,0 +1,10 @@ +#ifndef DECOMPRESS_BUNZIP2_H +#define DECOMPRESS_BUNZIP2_H + +int bunzip2(unsigned char *inbuf, int len, + int(*fill)(void*, unsigned int), + int(*flush)(void*, unsigned int), + unsigned char *output, + int *pos, + void(*error)(char *x)); +#endif diff --git a/include/linux/decompress/generic.h b/include/linux/decompress/generic.h new file mode 100644 index 00000000000..6dfb856327b --- /dev/null +++ b/include/linux/decompress/generic.h @@ -0,0 +1,33 @@ +#ifndef DECOMPRESS_GENERIC_H +#define DECOMPRESS_GENERIC_H + +/* Minimal chunksize to be read. + *Bzip2 prefers at least 4096 + *Lzma prefers 0x10000 */ +#define COMPR_IOBUF_SIZE 4096 + +typedef int (*decompress_fn) (unsigned char *inbuf, int len, + int(*fill)(void*, unsigned int), + int(*writebb)(void*, unsigned int), + unsigned char *output, + int *posp, + void(*error)(char *x)); + +/* inbuf - input buffer + *len - len of pre-read data in inbuf + *fill - function to fill inbuf if empty + *writebb - function to write out outbug + *posp - if non-null, input position (number of bytes read) will be + * returned here + * + *If len != 0, the inbuf is initialized (with as much data), and fill + *should not be called + *If len = 0, the inbuf is allocated, but empty. Its size is IOBUF_SIZE + *fill should be called (repeatedly...) to read data, at most IOBUF_SIZE + */ + +/* Utility routine to detect the decompression method */ +decompress_fn decompress_method(const unsigned char *inbuf, int len, + const char **name); + +#endif diff --git a/include/linux/decompress/inflate.h b/include/linux/decompress/inflate.h new file mode 100644 index 00000000000..f9b06ccc3e5 --- /dev/null +++ b/include/linux/decompress/inflate.h @@ -0,0 +1,13 @@ +#ifndef INFLATE_H +#define INFLATE_H + +/* Other housekeeping constants */ +#define INBUFSIZ 4096 + +int gunzip(unsigned char *inbuf, int len, + int(*fill)(void*, unsigned int), + int(*flush)(void*, unsigned int), + unsigned char *output, + int *pos, + void(*error_fn)(char *x)); +#endif diff --git a/include/linux/decompress/mm.h b/include/linux/decompress/mm.h new file mode 100644 index 00000000000..12ff8c3f1d0 --- /dev/null +++ b/include/linux/decompress/mm.h @@ -0,0 +1,87 @@ +/* + * linux/compr_mm.h + * + * Memory management for pre-boot and ramdisk uncompressors + * + * Authors: Alain Knaff <alain@knaff.lu> + * + */ + +#ifndef DECOMPR_MM_H +#define DECOMPR_MM_H + +#ifdef STATIC + +/* Code active when included from pre-boot environment: */ + +/* A trivial malloc implementation, adapted from + * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 + */ +static unsigned long malloc_ptr; +static int malloc_count; + +static void *malloc(int size) +{ + void *p; + + if (size < 0) + error("Malloc error"); + if (!malloc_ptr) + malloc_ptr = free_mem_ptr; + + malloc_ptr = (malloc_ptr + 3) & ~3; /* Align */ + + p = (void *)malloc_ptr; + malloc_ptr += size; + + if (free_mem_end_ptr && malloc_ptr >= free_mem_end_ptr) + error("Out of memory"); + + malloc_count++; + return p; +} + +static void free(void *where) +{ + malloc_count--; + if (!malloc_count) + malloc_ptr = free_mem_ptr; +} + +#define large_malloc(a) malloc(a) +#define large_free(a) free(a) + +#define set_error_fn(x) + +#define INIT + +#else /* STATIC */ + +/* Code active when compiled standalone for use when loading ramdisk: */ + +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/vmalloc.h> + +/* Use defines rather than static inline in order to avoid spurious + * warnings when not needed (indeed large_malloc / large_free are not + * needed by inflate */ + +#define malloc(a) kmalloc(a, GFP_KERNEL) +#define free(a) kfree(a) + +#define large_malloc(a) vmalloc(a) +#define large_free(a) vfree(a) + +static void(*error)(char *m); +#define set_error_fn(x) error = x; + +#define INIT __init +#define STATIC + +#include <linux/init.h> + +#endif /* STATIC */ + +#endif /* DECOMPR_MM_H */ diff --git a/include/linux/decompress/unlzma.h b/include/linux/decompress/unlzma.h new file mode 100644 index 00000000000..7796538f1bf --- /dev/null +++ b/include/linux/decompress/unlzma.h @@ -0,0 +1,12 @@ +#ifndef DECOMPRESS_UNLZMA_H +#define DECOMPRESS_UNLZMA_H + +int unlzma(unsigned char *, int, + int(*fill)(void*, unsigned int), + int(*flush)(void*, unsigned int), + unsigned char *output, + int *posp, + void(*error)(char *x) + ); + +#endif diff --git a/init/Kconfig b/init/Kconfig index 6a5c5fed66c..38396ec7ee3 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -101,6 +101,66 @@ config LOCALVERSION_AUTO which is done within the script "scripts/setlocalversion".) +config HAVE_KERNEL_GZIP + bool + +config HAVE_KERNEL_BZIP2 + bool + +config HAVE_KERNEL_LZMA + bool + +choice + prompt "Kernel compression mode" + default KERNEL_GZIP + depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA + help + The linux kernel is a kind of self-extracting executable. + Several compression algorithms are available, which differ + in efficiency, compression and decompression speed. + Compression speed is only relevant when building a kernel. + Decompression speed is relevant at each boot. + + If you have any problems with bzip2 or lzma compressed + kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older + version of this functionality (bzip2 only), for 2.4, was + supplied by Christian Ludwig) + + High compression options are mostly useful for users, who + are low on disk space (embedded systems), but for whom ram + size matters less. + + If in doubt, select 'gzip' + +config KERNEL_GZIP + bool "Gzip" + depends on HAVE_KERNEL_GZIP + help + The old and tried gzip compression. Its compression ratio is + the poorest among the 3 choices; however its speed (both + compression and decompression) is the fastest. + +config KERNEL_BZIP2 + bool "Bzip2" + depends on HAVE_KERNEL_BZIP2 + help + Its compression ratio and speed is intermediate. + Decompression speed is slowest among the three. The kernel + size is about 10% smaller with bzip2, in comparison to gzip. + Bzip2 uses a large amount of memory. For modern kernels you + will need at least 8MB RAM or more for booting. + +config KERNEL_LZMA + bool "LZMA" + depends on HAVE_KERNEL_LZMA + help + The most recent compression algorithm. + Its ratio is best, decompression speed is between the other + two. Compression is slowest. The kernel size is about 33% + smaller with LZMA in comparison to gzip. + +endchoice + config SWAP bool "Support for paging of anonymous memory (swap)" depends on MMU && BLOCK diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c index 0f0f0cf3ba9..027a402708d 100644 --- a/init/do_mounts_rd.c +++ b/init/do_mounts_rd.c @@ -11,6 +11,9 @@ #include "do_mounts.h" #include "../fs/squashfs/squashfs_fs.h" +#include <linux/decompress/generic.h> + + int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */ static int __init prompt_ramdisk(char *str) @@ -29,7 +32,7 @@ static int __init ramdisk_start_setup(char *str) } __setup("ramdisk_start=", ramdisk_start_setup); -static int __init crd_load(int in_fd, int out_fd); +static int __init crd_load(int in_fd, int out_fd, decompress_fn deco); /* * This routine tries to find a RAM disk image to load, and returns the @@ -38,15 +41,15 @@ static int __init crd_load(int in_fd, int out_fd); * numbers could not be found. * * We currently check for the following magic numbers: - * minix - * ext2 + * minix + * ext2 * romfs * cramfs * squashfs - * gzip + * gzip */ -static int __init -identify_ramdisk_image(int fd, int start_block) +static int __init +identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor) { const int size = 512; struct minix_super_block *minixsb; @@ -56,6 +59,7 @@ identify_ramdisk_image(int fd, int start_block) struct squashfs_super_block *squashfsb; int nblocks = -1; unsigned char *buf; + const char *compress_name; buf = kmalloc(size, GFP_KERNEL); if (!buf) @@ -69,18 +73,19 @@ identify_ramdisk_image(int fd, int start_block) memset(buf, 0xe5, size); /* - * Read block 0 to test for gzipped kernel + * Read block 0 to test for compressed kernel */ sys_lseek(fd, start_block * BLOCK_SIZE, 0); sys_read(fd, buf, size); - /* - * If it matches the gzip magic numbers, return 0 - */ - if (buf[0] == 037 && ((buf[1] == 0213) || (buf[1] == 0236))) { - printk(KERN_NOTICE - "RAMDISK: Compressed image found at block %d\n", - start_block); + *decompressor = decompress_method(buf, size, &compress_name); + if (compress_name) { + printk(KERN_NOTICE "RAMDISK: %s image found at block %d\n", + compress_name, start_block); + if (!*decompressor) + printk(KERN_EMERG + "RAMDISK: %s decompressor not configured!\n", + compress_name); nblocks = 0; goto done; } @@ -142,7 +147,7 @@ identify_ramdisk_image(int fd, int start_block) printk(KERN_NOTICE "RAMDISK: Couldn't find valid RAM disk image starting at %d.\n", start_block); - + done: sys_lseek(fd, start_block * BLOCK_SIZE, 0); kfree(buf); @@ -157,6 +162,7 @@ int __init rd_load_image(char *from) int nblocks, i, disk; char *buf = NULL; unsigned short rotate = 0; + decompress_fn decompressor = NULL; #if !defined(CONFIG_S390) && !defined(CONFIG_PPC_ISERIES) char rotator[4] = { '|' , '/' , '-' , '\\' }; #endif @@ -169,12 +175,12 @@ int __init rd_load_image(char *from) if (in_fd < 0) goto noclose_input; - nblocks = identify_ramdisk_image(in_fd, rd_image_start); + nblocks = identify_ramdisk_image(in_fd, rd_image_start, &decompressor); if (nblocks < 0) goto done; if (nblocks == 0) { - if (crd_load(in_fd, out_fd) == 0) + if (crd_load(in_fd, out_fd, decompressor) == 0) goto successful_load; goto done; } @@ -200,7 +206,7 @@ int __init rd_load_image(char *from) nblocks, rd_blocks); goto done; } - + /* * OK, time to copy in the data */ @@ -273,138 +279,48 @@ int __init rd_load_disk(int n) return rd_load_image("/dev/root"); } -/* - * gzip declarations - */ - -#define OF(args) args - -#ifndef memzero -#define memzero(s, n) memset ((s), 0, (n)) -#endif - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define INBUFSIZ 4096 -#define WSIZE 0x8000 /* window size--must be a power of two, and */ - /* at least 32K for zip's deflate method */ - -static uch *inbuf; -static uch *window; - -static unsigned insize; /* valid bytes in inbuf */ -static unsigned inptr; /* index of next byte to be processed in inbuf */ -static unsigned outcnt; /* bytes in output buffer */ static int exit_code; -static int unzip_error; -static long bytes_out; +static int decompress_error; static int crd_infd, crd_outfd; -#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) - -/* Diagnostic functions (stubbed out) */ -#define Assert(cond,msg) -#define Trace(x) -#define Tracev(x) -#define Tracevv(x) -#define Tracec(c,x) -#define Tracecv(c,x) - -#define STATIC static -#define INIT __init - -static int __init fill_inbuf(void); -static void __init flush_window(void); -static void __init error(char *m); - -#define NO_INFLATE_MALLOC - -#include "../lib/inflate.c" - -/* =========================================================================== - * Fill the input buffer. This is called only when the buffer is empty - * and at least one byte is really needed. - * Returning -1 does not guarantee that gunzip() will ever return. - */ -static int __init fill_inbuf(void) +static int __init compr_fill(void *buf, unsigned int len) { - if (exit_code) return -1; - - insize = sys_read(crd_infd, inbuf, INBUFSIZ); - if (insize == 0) { - error("RAMDISK: ran out of compressed data"); - return -1; - } - - inptr = 1; - - return inbuf[0]; + int r = sys_read(crd_infd, buf, len); + if (r < 0) + printk(KERN_ERR "RAMDISK: error while reading compressed data"); + else if (r == 0) + printk(KERN_ERR "RAMDISK: EOF while reading compressed data"); + return r; } -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -static void __init flush_window(void) +static int __init compr_flush(void *window, unsigned int outcnt) { - ulg c = crc; /* temporary variable */ - unsigned n, written; - uch *in, ch; - - written = sys_write(crd_outfd, window, outcnt); - if (written != outcnt && unzip_error == 0) { - printk(KERN_ERR "RAMDISK: incomplete write (%d != %d) %ld\n", - written, outcnt, bytes_out); - unzip_error = 1; - } - in = window; - for (n = 0; n < outcnt; n++) { - ch = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - outcnt = 0; + int written = sys_write(crd_outfd, window, outcnt); + if (written != outcnt) { + if (decompress_error == 0) + printk(KERN_ERR + "RAMDISK: incomplete write (%d != %d)\n", + written, outcnt); + decompress_error = 1; + return -1; + } + return outcnt; } static void __init error(char *x) { printk(KERN_ERR "%s\n", x); exit_code = 1; - unzip_error = 1; + decompress_error = 1; } -static int __init crd_load(int in_fd, int out_fd) +static int __init crd_load(int in_fd, int out_fd, decompress_fn deco) { int result; - - insize = 0; /* valid bytes in inbuf */ - inptr = 0; /* index of next byte to be processed in inbuf */ - outcnt = 0; /* bytes in output buffer */ - exit_code = 0; - bytes_out = 0; - crc = (ulg)0xffffffffL; /* shift register contents */ - crd_infd = in_fd; crd_outfd = out_fd; - inbuf = kmalloc(INBUFSIZ, GFP_KERNEL); - if (!inbuf) { - printk(KERN_ERR "RAMDISK: Couldn't allocate gzip buffer\n"); - return -1; - } - window = kmalloc(WSIZE, GFP_KERNEL); - if (!window) { - printk(KERN_ERR "RAMDISK: Couldn't allocate gzip window\n"); - kfree(inbuf); - return -1; - } - makecrc(); - result = gunzip(); - if (unzip_error) + result = deco(NULL, 0, compr_fill, compr_flush, NULL, NULL, error); + if (decompress_error) result = 1; - kfree(inbuf); - kfree(window); return result; } diff --git a/init/initramfs.c b/init/initramfs.c index d9c941c0c3c..7dcde7ea660 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -390,11 +390,13 @@ static int __init write_buffer(char *buf, unsigned len) return len - count; } -static void __init flush_buffer(char *buf, unsigned len) +static int __init flush_buffer(void *bufv, unsigned len) { + char *buf = (char *) bufv; int written; + int origLen = len; if (message) - return; + return -1; while ((written = write_buffer(buf, len)) < len && !message) { char c = buf[written]; if (c == '0') { @@ -408,84 +410,28 @@ static void __init flush_buffer(char *buf, unsigned len) } else error("junk in compressed archive"); } + return origLen; } -/* - * gzip declarations - */ +static unsigned my_inptr; /* index of next byte to be processed in inbuf */ -#define OF(args) args - -#ifndef memzero -#define memzero(s, n) memset ((s), 0, (n)) -#endif - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* window size--must be a power of two, and */ - /* at least 32K for zip's deflate method */ - -static uch *inbuf; -static uch *window; - -static unsigned insize; /* valid bytes in inbuf */ -static unsigned inptr; /* index of next byte to be processed in inbuf */ -static unsigned outcnt; /* bytes in output buffer */ -static long bytes_out; - -#define get_byte() (inptr < insize ? inbuf[inptr++] : -1) - -/* Diagnostic functions (stubbed out) */ -#define Assert(cond,msg) -#define Trace(x) -#define Tracev(x) -#define Tracevv(x) -#define Tracec(c,x) -#define Tracecv(c,x) - -#define STATIC static -#define INIT __init - -static void __init flush_window(void); -static void __init error(char *m); - -#define NO_INFLATE_MALLOC - -#include "../lib/inflate.c" - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -static void __init flush_window(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, ch; - - flush_buffer(window, outcnt); - in = window; - for (n = 0; n < outcnt; n++) { - ch = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - outcnt = 0; -} +#include <linux/decompress/generic.h> static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only) { int written; + decompress_fn decompress; + const char *compress_name; + static __initdata char msg_buf[64]; + dry_run = check_only; header_buf = kmalloc(110, GFP_KERNEL); symlink_buf = kmalloc(PATH_MAX + N_ALIGN(PATH_MAX) + 1, GFP_KERNEL); name_buf = kmalloc(N_ALIGN(PATH_MAX), GFP_KERNEL); - window = kmalloc(WSIZE, GFP_KERNEL); - if (!window || !header_buf || !symlink_buf || !name_buf) + + if (!header_buf || !symlink_buf || !name_buf) panic("can't allocate buffers"); + state = Start; this_header = 0; message = NULL; @@ -505,22 +451,25 @@ static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only) continue; } this_header = 0; - insize = len; - inbuf = buf; - inptr = 0; - outcnt = 0; /* bytes in output buffer */ - bytes_out = 0; - crc = (ulg)0xffffffffL; /* shift register contents */ - makecrc(); - gunzip(); + decompress = decompress_method(buf, len, &compress_name); + if (decompress) + decompress(buf, len, NULL, flush_buffer, NULL, + &my_inptr, error); + else if (compress_name) { + if (!message) { + snprintf(msg_buf, sizeof msg_buf, + "compression method %s not configured", + compress_name); + message = msg_buf; + } + } if (state != Reset) - error("junk in gzipped archive"); - this_header = saved_offset + inptr; - buf += inptr; - len -= inptr; + error("junk in compressed archive"); + this_header = saved_offset + my_inptr; + buf += my_inptr; + len -= my_inptr; } dir_utime(); - kfree(window); kfree(name_buf); kfree(symlink_buf); kfree(header_buf); @@ -579,7 +528,7 @@ static int __init populate_rootfs(void) char *err = unpack_to_rootfs(__initramfs_start, __initramfs_end - __initramfs_start, 0); if (err) - panic(err); + panic(err); /* Failed to decompress INTERNAL initramfs */ if (initrd_start) { #ifdef CONFIG_BLK_DEV_RAM int fd; @@ -605,9 +554,12 @@ static int __init populate_rootfs(void) printk(KERN_INFO "Unpacking initramfs..."); err = unpack_to_rootfs((char *)initrd_start, initrd_end - initrd_start, 0); - if (err) - panic(err); - printk(" done\n"); + if (err) { + printk(" failed!\n"); + printk(KERN_EMERG "%s\n", err); + } else { + printk(" done\n"); + } free_initrd(); #endif } diff --git a/lib/Kconfig b/lib/Kconfig index 03c2c24b908..daa481824d9 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -98,6 +98,20 @@ config LZO_DECOMPRESS tristate # +# These all provide a common interface (hence the apparent duplication with +# ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.) +# +config DECOMPRESS_GZIP + select ZLIB_INFLATE + tristate + +config DECOMPRESS_BZIP2 + tristate + +config DECOMPRESS_LZMA + tristate + +# # Generic allocator support is selected if needed # config GENERIC_ALLOCATOR diff --git a/lib/Makefile b/lib/Makefile index 32b0e64ded2..790de7c25d0 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -11,7 +11,8 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \ rbtree.o radix-tree.o dump_stack.o \ idr.o int_sqrt.o extable.o prio_tree.o \ sha1.o irq_regs.o reciprocal_div.o argv_split.o \ - proportions.o prio_heap.o ratelimit.o show_mem.o is_single_threaded.o + proportions.o prio_heap.o ratelimit.o show_mem.o \ + is_single_threaded.o decompress.o lib-$(CONFIG_MMU) += ioremap.o lib-$(CONFIG_SMP) += cpumask.o @@ -65,6 +66,10 @@ obj-$(CONFIG_REED_SOLOMON) += reed_solomon/ obj-$(CONFIG_LZO_COMPRESS) += lzo/ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/ +lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o +lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o +lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o + obj-$(CONFIG_TEXTSEARCH) += textsearch.o obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o obj-$(CONFIG_TEXTSEARCH_BM) += ts_bm.o diff --git a/lib/decompress.c b/lib/decompress.c new file mode 100644 index 00000000000..d2842f57167 --- /dev/null +++ b/lib/decompress.c @@ -0,0 +1,54 @@ +/* + * decompress.c + * + * Detect the decompression method based on magic number + */ + +#include <linux/decompress/generic.h> + +#include <linux/decompress/bunzip2.h> +#include <linux/decompress/unlzma.h> +#include <linux/decompress/inflate.h> + +#include <linux/types.h> +#include <linux/string.h> + +#ifndef CONFIG_DECOMPRESS_GZIP +# define gunzip NULL +#endif +#ifndef CONFIG_DECOMPRESS_BZIP2 +# define bunzip2 NULL +#endif +#ifndef CONFIG_DECOMPRESS_LZMA +# define unlzma NULL +#endif + +static const struct compress_format { + unsigned char magic[2]; + const char *name; + decompress_fn decompressor; +} compressed_formats[] = { + { {037, 0213}, "gzip", gunzip }, + { {037, 0236}, "gzip", gunzip }, + { {0x42, 0x5a}, "bzip2", bunzip2 }, + { {0x5d, 0x00}, "lzma", unlzma }, + { {0, 0}, NULL, NULL } +}; + +decompress_fn decompress_method(const unsigned char *inbuf, int len, + const char **name) +{ + const struct compress_format *cf; + + if (len < 2) + return NULL; /* Need at least this much... */ + + for (cf = compressed_formats; cf->name; cf++) { + if (!memcmp(inbuf, cf->magic, 2)) + break; + + } + if (name) + *name = cf->name; + return cf->decompressor; +} diff --git a/lib/decompress_bunzip2.c b/lib/decompress_bunzip2.c new file mode 100644 index 00000000000..5d3ddb5fcfd --- /dev/null +++ b/lib/decompress_bunzip2.c @@ -0,0 +1,735 @@ +/* vi: set sw = 4 ts = 4: */ +/* Small bzip2 deflate implementation, by Rob Landley (rob@landley.net). + + Based on bzip2 decompression code by Julian R Seward (jseward@acm.org), + which also acknowledges contributions by Mike Burrows, David Wheeler, + Peter Fenwick, Alistair Moffat, Radford Neal, Ian H. Witten, + Robert Sedgewick, and Jon L. Bentley. + + This code is licensed under the LGPLv2: + LGPL (http://www.gnu.org/copyleft/lgpl.html +*/ + +/* + Size and speed optimizations by Manuel Novoa III (mjn3@codepoet.org). + + More efficient reading of Huffman codes, a streamlined read_bunzip() + function, and various other tweaks. In (limited) tests, approximately + 20% faster than bzcat on x86 and about 10% faster on arm. + + Note that about 2/3 of the time is spent in read_unzip() reversing + the Burrows-Wheeler transformation. Much of that time is delay + resulting from cache misses. + + I would ask that anyone benefiting from this work, especially those + using it in commercial products, consider making a donation to my local + non-profit hospice organization in the name of the woman I loved, who + passed away Feb. 12, 2003. + + In memory of Toni W. Hagan + + Hospice of Acadiana, Inc. + 2600 Johnston St., Suite 200 + Lafayette, LA 70503-3240 + + Phone (337) 232-1234 or 1-800-738-2226 + Fax (337) 232-1297 + + http://www.hospiceacadiana.com/ + + Manuel + */ + +/* + Made it fit for running in Linux Kernel by Alain Knaff (alain@knaff.lu) +*/ + + +#ifndef STATIC +#include <linux/decompress/bunzip2.h> +#endif /* !STATIC */ + +#include <linux/decompress/mm.h> + +#ifndef INT_MAX +#define INT_MAX 0x7fffffff +#endif + +/* Constants for Huffman coding */ +#define MAX_GROUPS 6 +#define GROUP_SIZE 50 /* 64 would have been more efficient */ +#define MAX_HUFCODE_BITS 20 /* Longest Huffman code allowed */ +#define MAX_SYMBOLS 258 /* 256 literals + RUNA + RUNB */ +#define SYMBOL_RUNA 0 +#define SYMBOL_RUNB 1 + +/* Status return values */ +#define RETVAL_OK 0 +#define RETVAL_LAST_BLOCK (-1) +#define RETVAL_NOT_BZIP_DATA (-2) +#define RETVAL_UNEXPECTED_INPUT_EOF (-3) +#define RETVAL_UNEXPECTED_OUTPUT_EOF (-4) +#define RETVAL_DATA_ERROR (-5) +#define RETVAL_OUT_OF_MEMORY (-6) +#define RETVAL_OBSOLETE_INPUT (-7) + +/* Other housekeeping constants */ +#define BZIP2_IOBUF_SIZE 4096 + +/* This is what we know about each Huffman coding group */ +struct group_data { + /* We have an extra slot at the end of limit[] for a sentinal value. */ + int limit[MAX_HUFCODE_BITS+1]; + int base[MAX_HUFCODE_BITS]; + int permute[MAX_SYMBOLS]; + int minLen, maxLen; +}; + +/* Structure holding all the housekeeping data, including IO buffers and + memory that persists between calls to bunzip */ +struct bunzip_data { + /* State for interrupting output loop */ + int writeCopies, writePos, writeRunCountdown, writeCount, writeCurrent; + /* I/O tracking data (file handles, buffers, positions, etc.) */ + int (*fill)(void*, unsigned int); + int inbufCount, inbufPos /*, outbufPos*/; + unsigned char *inbuf /*,*outbuf*/; + unsigned int inbufBitCount, inbufBits; + /* The CRC values stored in the block header and calculated from the + data */ + unsigned int crc32Table[256], headerCRC, totalCRC, writeCRC; + /* Intermediate buffer and its size (in bytes) */ + unsigned int *dbuf, dbufSize; + /* These things are a bit too big to go on the stack */ + unsigned char selectors[32768]; /* nSelectors = 15 bits */ + struct group_data groups[MAX_GROUPS]; /* Huffman coding tables */ + int io_error; /* non-zero if we have IO error */ +}; + + +/* Return the next nnn bits of input. All reads from the compressed input + are done through this function. All reads are big endian */ +static unsigned int INIT get_bits(struct bunzip_data *bd, char bits_wanted) +{ + unsigned int bits = 0; + + /* If we need to get more data from the byte buffer, do so. + (Loop getting one byte at a time to enforce endianness and avoid + unaligned access.) */ + while (bd->inbufBitCount < bits_wanted) { + /* If we need to read more data from file into byte buffer, do + so */ + if (bd->inbufPos == bd->inbufCount) { + if (bd->io_error) + return 0; + bd->inbufCount = bd->fill(bd->inbuf, BZIP2_IOBUF_SIZE); + if (bd->inbufCount <= 0) { + bd->io_error = RETVAL_UNEXPECTED_INPUT_EOF; + return 0; + } + bd->inbufPos = 0; + } + /* Avoid 32-bit overflow (dump bit buffer to top of output) */ + if (bd->inbufBitCount >= 24) { + bits = bd->inbufBits&((1 << bd->inbufBitCount)-1); + bits_wanted -= bd->inbufBitCount; + bits <<= bits_wanted; + bd->inbufBitCount = 0; + } + /* Grab next 8 bits of input from buffer. */ + bd->inbufBits = (bd->inbufBits << 8)|bd->inbuf[bd->inbufPos++]; + bd->inbufBitCount += 8; + } + /* Calculate result */ + bd->inbufBitCount -= bits_wanted; + bits |= (bd->inbufBits >> bd->inbufBitCount)&((1 << bits_wanted)-1); + + return bits; +} + +/* Unpacks the next block and sets up for the inverse burrows-wheeler step. */ + +static int INIT get_next_block(struct bunzip_data *bd) +{ + struct group_data *hufGroup = NULL; + int *base = NULL; + int *limit = NULL; + int dbufCount, nextSym, dbufSize, groupCount, selector, + i, j, k, t, runPos, symCount, symTotal, nSelectors, + byteCount[256]; + unsigned char uc, symToByte[256], mtfSymbol[256], *selectors; + unsigned int *dbuf, origPtr; + + dbuf = bd->dbuf; + dbufSize = bd->dbufSize; + selectors = bd->selectors; + + /* Read in header signature and CRC, then validate signature. + (last block signature means CRC is for whole file, return now) */ + i = get_bits(bd, 24); + j = get_bits(bd, 24); + bd->headerCRC = get_bits(bd, 32); + if ((i == 0x177245) && (j == 0x385090)) + return RETVAL_LAST_BLOCK; + if ((i != 0x314159) || (j != 0x265359)) + return RETVAL_NOT_BZIP_DATA; + /* We can add support for blockRandomised if anybody complains. + There was some code for this in busybox 1.0.0-pre3, but nobody ever + noticed that it didn't actually work. */ + if (get_bits(bd, 1)) + return RETVAL_OBSOLETE_INPUT; + origPtr = get_bits(bd, 24); + if (origPtr > dbufSize) + return RETVAL_DATA_ERROR; + /* mapping table: if some byte values are never used (encoding things + like ascii text), the compression code removes the gaps to have fewer + symbols to deal with, and writes a sparse bitfield indicating which + values were present. We make a translation table to convert the + symbols back to the corresponding bytes. */ + t = get_bits(bd, 16); + symTotal = 0; + for (i = 0; i < 16; i++) { + if (t&(1 << (15-i))) { + k = get_bits(bd, 16); + for (j = 0; j < 16; j++) + if (k&(1 << (15-j))) + symToByte[symTotal++] = (16*i)+j; + } + } + /* How many different Huffman coding groups does this block use? */ + groupCount = get_bits(bd, 3); + if (groupCount < 2 || groupCount > MAX_GROUPS) + return RETVAL_DATA_ERROR; + /* nSelectors: Every GROUP_SIZE many symbols we select a new + Huffman coding group. Read in the group selector list, + which is stored as MTF encoded bit runs. (MTF = Move To + Front, as each value is used it's moved to the start of the + list.) */ + nSelectors = get_bits(bd, 15); + if (!nSelectors) + return RETVAL_DATA_ERROR; + for (i = 0; i < groupCount; i++) + mtfSymbol[i] = i; + for (i = 0; i < nSelectors; i++) { + /* Get next value */ + for (j = 0; get_bits(bd, 1); j++) + if (j >= groupCount) + return RETVAL_DATA_ERROR; + /* Decode MTF to get the next selector */ + uc = mtfSymbol[j]; + for (; j; j--) + mtfSymbol[j] = mtfSymbol[j-1]; + mtfSymbol[0] = selectors[i] = uc; + } + /* Read the Huffman coding tables for each group, which code + for symTotal literal symbols, plus two run symbols (RUNA, + RUNB) */ + symCount = symTotal+2; + for (j = 0; j < groupCount; j++) { + unsigned char length[MAX_SYMBOLS], temp[MAX_HUFCODE_BITS+1]; + int minLen, maxLen, pp; + /* Read Huffman code lengths for each symbol. They're + stored in a way similar to mtf; record a starting + value for the first symbol, and an offset from the + previous value for everys symbol after that. + (Subtracting 1 before the loop and then adding it + back at the end is an optimization that makes the + test inside the loop simpler: symbol length 0 + becomes negative, so an unsigned inequality catches + it.) */ + t = get_bits(bd, 5)-1; + for (i = 0; i < symCount; i++) { + for (;;) { + if (((unsigned)t) > (MAX_HUFCODE_BITS-1)) + return RETVAL_DATA_ERROR; + + /* If first bit is 0, stop. Else + second bit indicates whether to + increment or decrement the value. + Optimization: grab 2 bits and unget + the second if the first was 0. */ + + k = get_bits(bd, 2); + if (k < 2) { + bd->inbufBitCount++; + break; + } + /* Add one if second bit 1, else + * subtract 1. Avoids if/else */ + t += (((k+1)&2)-1); + } + /* Correct for the initial -1, to get the + * final symbol length */ + length[i] = t+1; + } + /* Find largest and smallest lengths in this group */ + minLen = maxLen = length[0]; + + for (i = 1; i < symCount; i++) { + if (length[i] > maxLen) + maxLen = length[i]; + else if (length[i] < minLen) + minLen = length[i]; + } + + /* Calculate permute[], base[], and limit[] tables from + * length[]. + * + * permute[] is the lookup table for converting + * Huffman coded symbols into decoded symbols. base[] + * is the amount to subtract from the value of a + * Huffman symbol of a given length when using + * permute[]. + * + * limit[] indicates the largest numerical value a + * symbol with a given number of bits can have. This + * is how the Huffman codes can vary in length: each + * code with a value > limit[length] needs another + * bit. + */ + hufGroup = bd->groups+j; + hufGroup->minLen = minLen; + hufGroup->maxLen = maxLen; + /* Note that minLen can't be smaller than 1, so we + adjust the base and limit array pointers so we're + not always wasting the first entry. We do this + again when using them (during symbol decoding).*/ + base = hufGroup->base-1; + limit = hufGroup->limit-1; + /* Calculate permute[]. Concurently, initialize + * temp[] and limit[]. */ + pp = 0; + for (i = minLen; i <= maxLen; i++) { + temp[i] = limit[i] = 0; + for (t = 0; t < symCount; t++) + if (length[t] == i) + hufGroup->permute[pp++] = t; + } + /* Count symbols coded for at each bit length */ + for (i = 0; i < symCount; i++) + temp[length[i]]++; + /* Calculate limit[] (the largest symbol-coding value + *at each bit length, which is (previous limit << + *1)+symbols at this level), and base[] (number of + *symbols to ignore at each bit length, which is limit + *minus the cumulative count of symbols coded for + *already). */ + pp = t = 0; + for (i = minLen; i < maxLen; i++) { + pp += temp[i]; + /* We read the largest possible symbol size + and then unget bits after determining how + many we need, and those extra bits could be + set to anything. (They're noise from + future symbols.) At each level we're + really only interested in the first few + bits, so here we set all the trailing + to-be-ignored bits to 1 so they don't + affect the value > limit[length] + comparison. */ + limit[i] = (pp << (maxLen - i)) - 1; + pp <<= 1; + base[i+1] = pp-(t += temp[i]); + } + limit[maxLen+1] = INT_MAX; /* Sentinal value for + * reading next sym. */ + limit[maxLen] = pp+temp[maxLen]-1; + base[minLen] = 0; + } + /* We've finished reading and digesting the block header. Now + read this block's Huffman coded symbols from the file and + undo the Huffman coding and run length encoding, saving the + result into dbuf[dbufCount++] = uc */ + + /* Initialize symbol occurrence counters and symbol Move To + * Front table */ + for (i = 0; i < 256; i++) { + byteCount[i] = 0; + mtfSymbol[i] = (unsigned char)i; + } + /* Loop through compressed symbols. */ + runPos = dbufCount = symCount = selector = 0; + for (;;) { + /* Determine which Huffman coding group to use. */ + if (!(symCount--)) { + symCount = GROUP_SIZE-1; + if (selector >= nSelectors) + return RETVAL_DATA_ERROR; + hufGroup = bd->groups+selectors[selector++]; + base = hufGroup->base-1; + limit = hufGroup->limit-1; + } + /* Read next Huffman-coded symbol. */ + /* Note: It is far cheaper to read maxLen bits and + back up than it is to read minLen bits and then an + additional bit at a time, testing as we go. + Because there is a trailing last block (with file + CRC), there is no danger of the overread causing an + unexpected EOF for a valid compressed file. As a + further optimization, we do the read inline + (falling back to a call to get_bits if the buffer + runs dry). The following (up to got_huff_bits:) is + equivalent to j = get_bits(bd, hufGroup->maxLen); + */ + while (bd->inbufBitCount < hufGroup->maxLen) { + if (bd->inbufPos == bd->inbufCount) { + j = get_bits(bd, hufGroup->maxLen); + goto got_huff_bits; + } + bd->inbufBits = + (bd->inbufBits << 8)|bd->inbuf[bd->inbufPos++]; + bd->inbufBitCount += 8; + }; + bd->inbufBitCount -= hufGroup->maxLen; + j = (bd->inbufBits >> bd->inbufBitCount)& + ((1 << hufGroup->maxLen)-1); +got_huff_bits: + /* Figure how how many bits are in next symbol and + * unget extras */ + i = hufGroup->minLen; + while (j > limit[i]) + ++i; + bd->inbufBitCount += (hufGroup->maxLen - i); + /* Huffman decode value to get nextSym (with bounds checking) */ + if ((i > hufGroup->maxLen) + || (((unsigned)(j = (j>>(hufGroup->maxLen-i))-base[i])) + >= MAX_SYMBOLS)) + return RETVAL_DATA_ERROR; + nextSym = hufGroup->permute[j]; + /* We have now decoded the symbol, which indicates + either a new literal byte, or a repeated run of the + most recent literal byte. First, check if nextSym + indicates a repeated run, and if so loop collecting + how many times to repeat the last literal. */ + if (((unsigned)nextSym) <= SYMBOL_RUNB) { /* RUNA or RUNB */ + /* If this is the start of a new run, zero out + * counter */ + if (!runPos) { + runPos = 1; + t = 0; + } + /* Neat trick that saves 1 symbol: instead of + or-ing 0 or 1 at each bit position, add 1 + or 2 instead. For example, 1011 is 1 << 0 + + 1 << 1 + 2 << 2. 1010 is 2 << 0 + 2 << 1 + + 1 << 2. You can make any bit pattern + that way using 1 less symbol than the basic + or 0/1 method (except all bits 0, which + would use no symbols, but a run of length 0 + doesn't mean anything in this context). + Thus space is saved. */ + t += (runPos << nextSym); + /* +runPos if RUNA; +2*runPos if RUNB */ + + runPos <<= 1; + continue; + } + /* When we hit the first non-run symbol after a run, + we now know how many times to repeat the last + literal, so append that many copies to our buffer + of decoded symbols (dbuf) now. (The last literal + used is the one at the head of the mtfSymbol + array.) */ + if (runPos) { + runPos = 0; + if (dbufCount+t >= dbufSize) + return RETVAL_DATA_ERROR; + + uc = symToByte[mtfSymbol[0]]; + byteCount[uc] += t; + while (t--) + dbuf[dbufCount++] = uc; + } + /* Is this the terminating symbol? */ + if (nextSym > symTotal) + break; + /* At this point, nextSym indicates a new literal + character. Subtract one to get the position in the + MTF array at which this literal is currently to be + found. (Note that the result can't be -1 or 0, + because 0 and 1 are RUNA and RUNB. But another + instance of the first symbol in the mtf array, + position 0, would have been handled as part of a + run above. Therefore 1 unused mtf position minus 2 + non-literal nextSym values equals -1.) */ + if (dbufCount >= dbufSize) + return RETVAL_DATA_ERROR; + i = nextSym - 1; + uc = mtfSymbol[i]; + /* Adjust the MTF array. Since we typically expect to + *move only a small number of symbols, and are bound + *by 256 in any case, using memmove here would + *typically be bigger and slower due to function call + *overhead and other assorted setup costs. */ + do { + mtfSymbol[i] = mtfSymbol[i-1]; + } while (--i); + mtfSymbol[0] = uc; + uc = symToByte[uc]; + /* We have our literal byte. Save it into dbuf. */ + byteCount[uc]++; + dbuf[dbufCount++] = (unsigned int)uc; + } + /* At this point, we've read all the Huffman-coded symbols + (and repeated runs) for this block from the input stream, + and decoded them into the intermediate buffer. There are + dbufCount many decoded bytes in dbuf[]. Now undo the + Burrows-Wheeler transform on dbuf. See + http://dogma.net/markn/articles/bwt/bwt.htm + */ + /* Turn byteCount into cumulative occurrence counts of 0 to n-1. */ + j = 0; + for (i = 0; i < 256; i++) { + k = j+byteCount[i]; + byteCount[i] = j; + j = k; + } + /* Figure out what order dbuf would be in if we sorted it. */ + for (i = 0; i < dbufCount; i++) { + uc = (unsigned char)(dbuf[i] & 0xff); + dbuf[byteCount[uc]] |= (i << 8); + byteCount[uc]++; + } + /* Decode first byte by hand to initialize "previous" byte. + Note that it doesn't get output, and if the first three + characters are identical it doesn't qualify as a run (hence + writeRunCountdown = 5). */ + if (dbufCount) { + if (origPtr >= dbufCount) + return RETVAL_DATA_ERROR; + bd->writePos = dbuf[origPtr]; + bd->writeCurrent = (unsigned char)(bd->writePos&0xff); + bd->writePos >>= 8; + bd->writeRunCountdown = 5; + } + bd->writeCount = dbufCount; + + return RETVAL_OK; +} + +/* Undo burrows-wheeler transform on intermediate buffer to produce output. + If start_bunzip was initialized with out_fd =-1, then up to len bytes of + data are written to outbuf. Return value is number of bytes written or + error (all errors are negative numbers). If out_fd!=-1, outbuf and len + are ignored, data is written to out_fd and return is RETVAL_OK or error. +*/ + +static int INIT read_bunzip(struct bunzip_data *bd, char *outbuf, int len) +{ + const unsigned int *dbuf; + int pos, xcurrent, previous, gotcount; + + /* If last read was short due to end of file, return last block now */ + if (bd->writeCount < 0) + return bd->writeCount; + + gotcount = 0; + dbuf = bd->dbuf; + pos = bd->writePos; + xcurrent = bd->writeCurrent; + + /* We will always have pending decoded data to write into the output + buffer unless this is the very first call (in which case we haven't + Huffman-decoded a block into the intermediate buffer yet). */ + + if (bd->writeCopies) { + /* Inside the loop, writeCopies means extra copies (beyond 1) */ + --bd->writeCopies; + /* Loop outputting bytes */ + for (;;) { + /* If the output buffer is full, snapshot + * state and return */ + if (gotcount >= len) { + bd->writePos = pos; + bd->writeCurrent = xcurrent; + bd->writeCopies++; + return len; + } + /* Write next byte into output buffer, updating CRC */ + outbuf[gotcount++] = xcurrent; + bd->writeCRC = (((bd->writeCRC) << 8) + ^bd->crc32Table[((bd->writeCRC) >> 24) + ^xcurrent]); + /* Loop now if we're outputting multiple + * copies of this byte */ + if (bd->writeCopies) { + --bd->writeCopies; + continue; + } +decode_next_byte: + if (!bd->writeCount--) + break; + /* Follow sequence vector to undo + * Burrows-Wheeler transform */ + previous = xcurrent; + pos = dbuf[pos]; + xcurrent = pos&0xff; + pos >>= 8; + /* After 3 consecutive copies of the same + byte, the 4th is a repeat count. We count + down from 4 instead *of counting up because + testing for non-zero is faster */ + if (--bd->writeRunCountdown) { + if (xcurrent != previous) + bd->writeRunCountdown = 4; + } else { + /* We have a repeated run, this byte + * indicates the count */ + bd->writeCopies = xcurrent; + xcurrent = previous; + bd->writeRunCountdown = 5; + /* Sometimes there are just 3 bytes + * (run length 0) */ + if (!bd->writeCopies) + goto decode_next_byte; + /* Subtract the 1 copy we'd output + * anyway to get extras */ + --bd->writeCopies; + } + } + /* Decompression of this block completed successfully */ + bd->writeCRC = ~bd->writeCRC; + bd->totalCRC = ((bd->totalCRC << 1) | + (bd->totalCRC >> 31)) ^ bd->writeCRC; + /* If this block had a CRC error, force file level CRC error. */ + if (bd->writeCRC != bd->headerCRC) { + bd->totalCRC = bd->headerCRC+1; + return RETVAL_LAST_BLOCK; + } + } + + /* Refill the intermediate buffer by Huffman-decoding next + * block of input */ + /* (previous is just a convenient unused temp variable here) */ + previous = get_next_block(bd); + if (previous) { + bd->writeCount = previous; + return (previous != RETVAL_LAST_BLOCK) ? previous : gotcount; + } + bd->writeCRC = 0xffffffffUL; + pos = bd->writePos; + xcurrent = bd->writeCurrent; + goto decode_next_byte; +} + +static int INIT nofill(void *buf, unsigned int len) +{ + return -1; +} + +/* Allocate the structure, read file header. If in_fd ==-1, inbuf must contain + a complete bunzip file (len bytes long). If in_fd!=-1, inbuf and len are + ignored, and data is read from file handle into temporary buffer. */ +static int INIT start_bunzip(struct bunzip_data **bdp, void *inbuf, int len, + int (*fill)(void*, unsigned int)) +{ + struct bunzip_data *bd; + unsigned int i, j, c; + const unsigned int BZh0 = + (((unsigned int)'B') << 24)+(((unsigned int)'Z') << 16) + +(((unsigned int)'h') << 8)+(unsigned int)'0'; + + /* Figure out how much data to allocate */ + i = sizeof(struct bunzip_data); + + /* Allocate bunzip_data. Most fields initialize to zero. */ + bd = *bdp = malloc(i); + memset(bd, 0, sizeof(struct bunzip_data)); + /* Setup input buffer */ + bd->inbuf = inbuf; + bd->inbufCount = len; + if (fill != NULL) + bd->fill = fill; + else + bd->fill = nofill; + + /* Init the CRC32 table (big endian) */ + for (i = 0; i < 256; i++) { + c = i << 24; + for (j = 8; j; j--) + c = c&0x80000000 ? (c << 1)^0x04c11db7 : (c << 1); + bd->crc32Table[i] = c; + } + + /* Ensure that file starts with "BZh['1'-'9']." */ + i = get_bits(bd, 32); + if (((unsigned int)(i-BZh0-1)) >= 9) + return RETVAL_NOT_BZIP_DATA; + + /* Fourth byte (ascii '1'-'9'), indicates block size in units of 100k of + uncompressed data. Allocate intermediate buffer for block. */ + bd->dbufSize = 100000*(i-BZh0); + + bd->dbuf = large_malloc(bd->dbufSize * sizeof(int)); + return RETVAL_OK; +} + +/* Example usage: decompress src_fd to dst_fd. (Stops at end of bzip2 data, + not end of file.) */ +STATIC int INIT bunzip2(unsigned char *buf, int len, + int(*fill)(void*, unsigned int), + int(*flush)(void*, unsigned int), + unsigned char *outbuf, + int *pos, + void(*error_fn)(char *x)) +{ + struct bunzip_data *bd; + int i = -1; + unsigned char *inbuf; + + set_error_fn(error_fn); + if (flush) + outbuf = malloc(BZIP2_IOBUF_SIZE); + else + len -= 4; /* Uncompressed size hack active in pre-boot + environment */ + if (!outbuf) { + error("Could not allocate output bufer"); + return -1; + } + if (buf) + inbuf = buf; + else + inbuf = malloc(BZIP2_IOBUF_SIZE); + if (!inbuf) { + error("Could not allocate input bufer"); + goto exit_0; + } + i = start_bunzip(&bd, inbuf, len, fill); + if (!i) { + for (;;) { + i = read_bunzip(bd, outbuf, BZIP2_IOBUF_SIZE); + if (i <= 0) + break; + if (!flush) + outbuf += i; + else + if (i != flush(outbuf, i)) { + i = RETVAL_UNEXPECTED_OUTPUT_EOF; + break; + } + } + } + /* Check CRC and release memory */ + if (i == RETVAL_LAST_BLOCK) { + if (bd->headerCRC != bd->totalCRC) + error("Data integrity error when decompressing."); + else + i = RETVAL_OK; + } else if (i == RETVAL_UNEXPECTED_OUTPUT_EOF) { + error("Compressed file ends unexpectedly"); + } + if (bd->dbuf) + large_free(bd->dbuf); + if (pos) + *pos = bd->inbufPos; + free(bd); + if (!buf) + free(inbuf); +exit_0: + if (flush) + free(outbuf); + return i; +} + +#define decompress bunzip2 diff --git a/lib/decompress_inflate.c b/lib/decompress_inflate.c new file mode 100644 index 00000000000..839a329b4fc --- /dev/null +++ b/lib/decompress_inflate.c @@ -0,0 +1,167 @@ +#ifdef STATIC +/* Pre-boot environment: included */ + +/* prevent inclusion of _LINUX_KERNEL_H in pre-boot environment: lots + * errors about console_printk etc... on ARM */ +#define _LINUX_KERNEL_H + +#include "zlib_inflate/inftrees.c" +#include "zlib_inflate/inffast.c" +#include "zlib_inflate/inflate.c" + +#else /* STATIC */ +/* initramfs et al: linked */ + +#include <linux/zutil.h> + +#include "zlib_inflate/inftrees.h" +#include "zlib_inflate/inffast.h" +#include "zlib_inflate/inflate.h" + +#include "zlib_inflate/infutil.h" + +#endif /* STATIC */ + +#include <linux/decompress/mm.h> + +#define INBUF_LEN (16*1024) + +/* Included from initramfs et al code */ +STATIC int INIT gunzip(unsigned char *buf, int len, + int(*fill)(void*, unsigned int), + int(*flush)(void*, unsigned int), + unsigned char *out_buf, + int *pos, + void(*error_fn)(char *x)) { + u8 *zbuf; + struct z_stream_s *strm; + int rc; + size_t out_len; + + set_error_fn(error_fn); + rc = -1; + if (flush) { + out_len = 0x8000; /* 32 K */ + out_buf = malloc(out_len); + } else { + out_len = 0x7fffffff; /* no limit */ + } + if (!out_buf) { + error("Out of memory while allocating output buffer"); + goto gunzip_nomem1; + } + + if (buf) + zbuf = buf; + else { + zbuf = malloc(INBUF_LEN); + len = 0; + } + if (!zbuf) { + error("Out of memory while allocating input buffer"); + goto gunzip_nomem2; + } + + strm = malloc(sizeof(*strm)); + if (strm == NULL) { + error("Out of memory while allocating z_stream"); + goto gunzip_nomem3; + } + + strm->workspace = malloc(flush ? zlib_inflate_workspacesize() : + sizeof(struct inflate_state)); + if (strm->workspace == NULL) { + error("Out of memory while allocating workspace"); + goto gunzip_nomem4; + } + + if (len == 0) + len = fill(zbuf, INBUF_LEN); + + /* verify the gzip header */ + if (len < 10 || + zbuf[0] != 0x1f || zbuf[1] != 0x8b || zbuf[2] != 0x08) { + if (pos) + *pos = 0; + error("Not a gzip file"); + goto gunzip_5; + } + + /* skip over gzip header (1f,8b,08... 10 bytes total + + * possible asciz filename) + */ + strm->next_in = zbuf + 10; + /* skip over asciz filename */ + if (zbuf[3] & 0x8) { + while (strm->next_in[0]) + strm->next_in++; + strm->next_in++; + } + strm->avail_in = len - (strm->next_in - zbuf); + + strm->next_out = out_buf; + strm->avail_out = out_len; + + rc = zlib_inflateInit2(strm, -MAX_WBITS); + + if (!flush) { + WS(strm)->inflate_state.wsize = 0; + WS(strm)->inflate_state.window = NULL; + } + + while (rc == Z_OK) { + if (strm->avail_in == 0) { + /* TODO: handle case where both pos and fill are set */ + len = fill(zbuf, INBUF_LEN); + if (len < 0) { + rc = -1; + error("read error"); + break; + } + strm->next_in = zbuf; + strm->avail_in = len; + } + rc = zlib_inflate(strm, 0); + + /* Write any data generated */ + if (flush && strm->next_out > out_buf) { + int l = strm->next_out - out_buf; + if (l != flush(out_buf, l)) { + rc = -1; + error("write error"); + break; + } + strm->next_out = out_buf; + strm->avail_out = out_len; + } + + /* after Z_FINISH, only Z_STREAM_END is "we unpacked it all" */ + if (rc == Z_STREAM_END) { + rc = 0; + break; + } else if (rc != Z_OK) { + error("uncompression error"); + rc = -1; + } + } + + zlib_inflateEnd(strm); + if (pos) + /* add + 8 to skip over trailer */ + *pos = strm->next_in - zbuf+8; + +gunzip_5: + free(strm->workspace); +gunzip_nomem4: + free(strm); +gunzip_nomem3: + if (!buf) + free(zbuf); +gunzip_nomem2: + if (flush) + free(out_buf); +gunzip_nomem1: + return rc; /* returns Z_OK (0) if successful */ +} + +#define decompress gunzip diff --git a/lib/decompress_unlzma.c b/lib/decompress_unlzma.c new file mode 100644 index 00000000000..546f2f4c157 --- /dev/null +++ b/lib/decompress_unlzma.c @@ -0,0 +1,647 @@ +/* Lzma decompressor for Linux kernel. Shamelessly snarfed + *from busybox 1.1.1 + * + *Linux kernel adaptation + *Copyright (C) 2006 Alain < alain@knaff.lu > + * + *Based on small lzma deflate implementation/Small range coder + *implementation for lzma. + *Copyright (C) 2006 Aurelien Jacobs < aurel@gnuage.org > + * + *Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/) + *Copyright (C) 1999-2005 Igor Pavlov + * + *Copyrights of the parts, see headers below. + * + * + *This program is free software; you can redistribute it and/or + *modify it under the terms of the GNU Lesser General Public + *License as published by the Free Software Foundation; either + *version 2.1 of the License, or (at your option) any later version. + * + *This program is distributed in the hope that it will be useful, + *but WITHOUT ANY WARRANTY; without even the implied warranty of + *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + *Lesser General Public License for more details. + * + *You should have received a copy of the GNU Lesser General Public + *License along with this library; if not, write to the Free Software + *Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef STATIC +#include <linux/decompress/unlzma.h> +#endif /* STATIC */ + +#include <linux/decompress/mm.h> + +#define MIN(a, b) (((a) < (b)) ? (a) : (b)) + +static long long INIT read_int(unsigned char *ptr, int size) +{ + int i; + long long ret = 0; + + for (i = 0; i < size; i++) + ret = (ret << 8) | ptr[size-i-1]; + return ret; +} + +#define ENDIAN_CONVERT(x) \ + x = (typeof(x))read_int((unsigned char *)&x, sizeof(x)) + + +/* Small range coder implementation for lzma. + *Copyright (C) 2006 Aurelien Jacobs < aurel@gnuage.org > + * + *Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/) + *Copyright (c) 1999-2005 Igor Pavlov + */ + +#include <linux/compiler.h> + +#define LZMA_IOBUF_SIZE 0x10000 + +struct rc { + int (*fill)(void*, unsigned int); + uint8_t *ptr; + uint8_t *buffer; + uint8_t *buffer_end; + int buffer_size; + uint32_t code; + uint32_t range; + uint32_t bound; +}; + + +#define RC_TOP_BITS 24 +#define RC_MOVE_BITS 5 +#define RC_MODEL_TOTAL_BITS 11 + + +/* Called twice: once at startup and once in rc_normalize() */ +static void INIT rc_read(struct rc *rc) +{ + rc->buffer_size = rc->fill((char *)rc->buffer, LZMA_IOBUF_SIZE); + if (rc->buffer_size <= 0) + error("unexpected EOF"); + rc->ptr = rc->buffer; + rc->buffer_end = rc->buffer + rc->buffer_size; +} + +/* Called once */ +static inline void INIT rc_init(struct rc *rc, + int (*fill)(void*, unsigned int), + char *buffer, int buffer_size) +{ + rc->fill = fill; + rc->buffer = (uint8_t *)buffer; + rc->buffer_size = buffer_size; + rc->buffer_end = rc->buffer + rc->buffer_size; + rc->ptr = rc->buffer; + + rc->code = 0; + rc->range = 0xFFFFFFFF; +} + +static inline void INIT rc_init_code(struct rc *rc) +{ + int i; + + for (i = 0; i < 5; i++) { + if (rc->ptr >= rc->buffer_end) + rc_read(rc); + rc->code = (rc->code << 8) | *rc->ptr++; + } +} + + +/* Called once. TODO: bb_maybe_free() */ +static inline void INIT rc_free(struct rc *rc) +{ + free(rc->buffer); +} + +/* Called twice, but one callsite is in inline'd rc_is_bit_0_helper() */ +static void INIT rc_do_normalize(struct rc *rc) +{ + if (rc->ptr >= rc->buffer_end) + rc_read(rc); + rc->range <<= 8; + rc->code = (rc->code << 8) | *rc->ptr++; +} +static inline void INIT rc_normalize(struct rc *rc) +{ + if (rc->range < (1 << RC_TOP_BITS)) + rc_do_normalize(rc); +} + +/* Called 9 times */ +/* Why rc_is_bit_0_helper exists? + *Because we want to always expose (rc->code < rc->bound) to optimizer + */ +static inline uint32_t INIT rc_is_bit_0_helper(struct rc *rc, uint16_t *p) +{ + rc_normalize(rc); + rc->bound = *p * (rc->range >> RC_MODEL_TOTAL_BITS); + return rc->bound; +} +static inline int INIT rc_is_bit_0(struct rc *rc, uint16_t *p) +{ + uint32_t t = rc_is_bit_0_helper(rc, p); + return rc->code < t; +} + +/* Called ~10 times, but very small, thus inlined */ +static inline void INIT rc_update_bit_0(struct rc *rc, uint16_t *p) +{ + rc->range = rc->bound; + *p += ((1 << RC_MODEL_TOTAL_BITS) - *p) >> RC_MOVE_BITS; +} +static inline void rc_update_bit_1(struct rc *rc, uint16_t *p) +{ + rc->range -= rc->bound; + rc->code -= rc->bound; + *p -= *p >> RC_MOVE_BITS; +} + +/* Called 4 times in unlzma loop */ +static int INIT rc_get_bit(struct rc *rc, uint16_t *p, int *symbol) +{ + if (rc_is_bit_0(rc, p)) { + rc_update_bit_0(rc, p); + *symbol *= 2; + return 0; + } else { + rc_update_bit_1(rc, p); + *symbol = *symbol * 2 + 1; + return 1; + } +} + +/* Called once */ +static inline int INIT rc_direct_bit(struct rc *rc) +{ + rc_normalize(rc); + rc->range >>= 1; + if (rc->code >= rc->range) { + rc->code -= rc->range; + return 1; + } + return 0; +} + +/* Called twice */ +static inline void INIT +rc_bit_tree_decode(struct rc *rc, uint16_t *p, int num_levels, int *symbol) +{ + int i = num_levels; + + *symbol = 1; + while (i--) + rc_get_bit(rc, p + *symbol, symbol); + *symbol -= 1 << num_levels; +} + + +/* + * Small lzma deflate implementation. + * Copyright (C) 2006 Aurelien Jacobs < aurel@gnuage.org > + * + * Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/) + * Copyright (C) 1999-2005 Igor Pavlov + */ + + +struct lzma_header { + uint8_t pos; + uint32_t dict_size; + uint64_t dst_size; +} __attribute__ ((packed)) ; + + +#define LZMA_BASE_SIZE 1846 +#define LZMA_LIT_SIZE 768 + +#define LZMA_NUM_POS_BITS_MAX 4 + +#define LZMA_LEN_NUM_LOW_BITS 3 +#define LZMA_LEN_NUM_MID_BITS 3 +#define LZMA_LEN_NUM_HIGH_BITS 8 + +#define LZMA_LEN_CHOICE 0 +#define LZMA_LEN_CHOICE_2 (LZMA_LEN_CHOICE + 1) +#define LZMA_LEN_LOW (LZMA_LEN_CHOICE_2 + 1) +#define LZMA_LEN_MID (LZMA_LEN_LOW \ + + (1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_LOW_BITS))) +#define LZMA_LEN_HIGH (LZMA_LEN_MID \ + +(1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_MID_BITS))) +#define LZMA_NUM_LEN_PROBS (LZMA_LEN_HIGH + (1 << LZMA_LEN_NUM_HIGH_BITS)) + +#define LZMA_NUM_STATES 12 +#define LZMA_NUM_LIT_STATES 7 + +#define LZMA_START_POS_MODEL_INDEX 4 +#define LZMA_END_POS_MODEL_INDEX 14 +#define LZMA_NUM_FULL_DISTANCES (1 << (LZMA_END_POS_MODEL_INDEX >> 1)) + +#define LZMA_NUM_POS_SLOT_BITS 6 +#define LZMA_NUM_LEN_TO_POS_STATES 4 + +#define LZMA_NUM_ALIGN_BITS 4 + +#define LZMA_MATCH_MIN_LEN 2 + +#define LZMA_IS_MATCH 0 +#define LZMA_IS_REP (LZMA_IS_MATCH + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX)) +#define LZMA_IS_REP_G0 (LZMA_IS_REP + LZMA_NUM_STATES) +#define LZMA_IS_REP_G1 (LZMA_IS_REP_G0 + LZMA_NUM_STATES) +#define LZMA_IS_REP_G2 (LZMA_IS_REP_G1 + LZMA_NUM_STATES) +#define LZMA_IS_REP_0_LONG (LZMA_IS_REP_G2 + LZMA_NUM_STATES) +#define LZMA_POS_SLOT (LZMA_IS_REP_0_LONG \ + + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX)) +#define LZMA_SPEC_POS (LZMA_POS_SLOT \ + +(LZMA_NUM_LEN_TO_POS_STATES << LZMA_NUM_POS_SLOT_BITS)) +#define LZMA_ALIGN (LZMA_SPEC_POS \ + + LZMA_NUM_FULL_DISTANCES - LZMA_END_POS_MODEL_INDEX) +#define LZMA_LEN_CODER (LZMA_ALIGN + (1 << LZMA_NUM_ALIGN_BITS)) +#define LZMA_REP_LEN_CODER (LZMA_LEN_CODER + LZMA_NUM_LEN_PROBS) +#define LZMA_LITERAL (LZMA_REP_LEN_CODER + LZMA_NUM_LEN_PROBS) + + +struct writer { + uint8_t *buffer; + uint8_t previous_byte; + size_t buffer_pos; + int bufsize; + size_t global_pos; + int(*flush)(void*, unsigned int); + struct lzma_header *header; +}; + +struct cstate { + int state; + uint32_t rep0, rep1, rep2, rep3; +}; + +static inline size_t INIT get_pos(struct writer *wr) +{ + return + wr->global_pos + wr->buffer_pos; +} + +static inline uint8_t INIT peek_old_byte(struct writer *wr, + uint32_t offs) +{ + if (!wr->flush) { + int32_t pos; + while (offs > wr->header->dict_size) + offs -= wr->header->dict_size; + pos = wr->buffer_pos - offs; + return wr->buffer[pos]; + } else { + uint32_t pos = wr->buffer_pos - offs; + while (pos >= wr->header->dict_size) + pos += wr->header->dict_size; + return wr->buffer[pos]; + } + +} + +static inline void INIT write_byte(struct writer *wr, uint8_t byte) +{ + wr->buffer[wr->buffer_pos++] = wr->previous_byte = byte; + if (wr->flush && wr->buffer_pos == wr->header->dict_size) { + wr->buffer_pos = 0; + wr->global_pos += wr->header->dict_size; + wr->flush((char *)wr->buffer, wr->header->dict_size); + } +} + + +static inline void INIT copy_byte(struct writer *wr, uint32_t offs) +{ + write_byte(wr, peek_old_byte(wr, offs)); +} + +static inline void INIT copy_bytes(struct writer *wr, + uint32_t rep0, int len) +{ + do { + copy_byte(wr, rep0); + len--; + } while (len != 0 && wr->buffer_pos < wr->header->dst_size); +} + +static inline void INIT process_bit0(struct writer *wr, struct rc *rc, + struct cstate *cst, uint16_t *p, + int pos_state, uint16_t *prob, + int lc, uint32_t literal_pos_mask) { + int mi = 1; + rc_update_bit_0(rc, prob); + prob = (p + LZMA_LITERAL + + (LZMA_LIT_SIZE + * (((get_pos(wr) & literal_pos_mask) << lc) + + (wr->previous_byte >> (8 - lc)))) + ); + + if (cst->state >= LZMA_NUM_LIT_STATES) { + int match_byte = peek_old_byte(wr, cst->rep0); + do { + int bit; + uint16_t *prob_lit; + + match_byte <<= 1; + bit = match_byte & 0x100; + prob_lit = prob + 0x100 + bit + mi; + if (rc_get_bit(rc, prob_lit, &mi)) { + if (!bit) + break; + } else { + if (bit) + break; + } + } while (mi < 0x100); + } + while (mi < 0x100) { + uint16_t *prob_lit = prob + mi; + rc_get_bit(rc, prob_lit, &mi); + } + write_byte(wr, mi); + if (cst->state < 4) + cst->state = 0; + else if (cst->state < 10) + cst->state -= 3; + else + cst->state -= 6; +} + +static inline void INIT process_bit1(struct writer *wr, struct rc *rc, + struct cstate *cst, uint16_t *p, + int pos_state, uint16_t *prob) { + int offset; + uint16_t *prob_len; + int num_bits; + int len; + + rc_update_bit_1(rc, prob); + prob = p + LZMA_IS_REP + cst->state; + if (rc_is_bit_0(rc, prob)) { + rc_update_bit_0(rc, prob); + cst->rep3 = cst->rep2; + cst->rep2 = cst->rep1; + cst->rep1 = cst->rep0; + cst->state = cst->state < LZMA_NUM_LIT_STATES ? 0 : 3; + prob = p + LZMA_LEN_CODER; + } else { + rc_update_bit_1(rc, prob); + prob = p + LZMA_IS_REP_G0 + cst->state; + if (rc_is_bit_0(rc, prob)) { + rc_update_bit_0(rc, prob); + prob = (p + LZMA_IS_REP_0_LONG + + (cst->state << + LZMA_NUM_POS_BITS_MAX) + + pos_state); + if (rc_is_bit_0(rc, prob)) { + rc_update_bit_0(rc, prob); + + cst->state = cst->state < LZMA_NUM_LIT_STATES ? + 9 : 11; + copy_byte(wr, cst->rep0); + return; + } else { + rc_update_bit_1(rc, prob); + } + } else { + uint32_t distance; + + rc_update_bit_1(rc, prob); + prob = p + LZMA_IS_REP_G1 + cst->state; + if (rc_is_bit_0(rc, prob)) { + rc_update_bit_0(rc, prob); + distance = cst->rep1; + } else { + rc_update_bit_1(rc, prob); + prob = p + LZMA_IS_REP_G2 + cst->state; + if (rc_is_bit_0(rc, prob)) { + rc_update_bit_0(rc, prob); + distance = cst->rep2; + } else { + rc_update_bit_1(rc, prob); + distance = cst->rep3; + cst->rep3 = cst->rep2; + } + cst->rep2 = cst->rep1; + } + cst->rep1 = cst->rep0; + cst->rep0 = distance; + } + cst->state = cst->state < LZMA_NUM_LIT_STATES ? 8 : 11; + prob = p + LZMA_REP_LEN_CODER; + } + + prob_len = prob + LZMA_LEN_CHOICE; + if (rc_is_bit_0(rc, prob_len)) { + rc_update_bit_0(rc, prob_len); + prob_len = (prob + LZMA_LEN_LOW + + (pos_state << + LZMA_LEN_NUM_LOW_BITS)); + offset = 0; + num_bits = LZMA_LEN_NUM_LOW_BITS; + } else { + rc_update_bit_1(rc, prob_len); + prob_len = prob + LZMA_LEN_CHOICE_2; + if (rc_is_bit_0(rc, prob_len)) { + rc_update_bit_0(rc, prob_len); + prob_len = (prob + LZMA_LEN_MID + + (pos_state << + LZMA_LEN_NUM_MID_BITS)); + offset = 1 << LZMA_LEN_NUM_LOW_BITS; + num_bits = LZMA_LEN_NUM_MID_BITS; + } else { + rc_update_bit_1(rc, prob_len); + prob_len = prob + LZMA_LEN_HIGH; + offset = ((1 << LZMA_LEN_NUM_LOW_BITS) + + (1 << LZMA_LEN_NUM_MID_BITS)); + num_bits = LZMA_LEN_NUM_HIGH_BITS; + } + } + + rc_bit_tree_decode(rc, prob_len, num_bits, &len); + len += offset; + + if (cst->state < 4) { + int pos_slot; + + cst->state += LZMA_NUM_LIT_STATES; + prob = + p + LZMA_POS_SLOT + + ((len < + LZMA_NUM_LEN_TO_POS_STATES ? len : + LZMA_NUM_LEN_TO_POS_STATES - 1) + << LZMA_NUM_POS_SLOT_BITS); + rc_bit_tree_decode(rc, prob, + LZMA_NUM_POS_SLOT_BITS, + &pos_slot); + if (pos_slot >= LZMA_START_POS_MODEL_INDEX) { + int i, mi; + num_bits = (pos_slot >> 1) - 1; + cst->rep0 = 2 | (pos_slot & 1); + if (pos_slot < LZMA_END_POS_MODEL_INDEX) { + cst->rep0 <<= num_bits; + prob = p + LZMA_SPEC_POS + + cst->rep0 - pos_slot - 1; + } else { + num_bits -= LZMA_NUM_ALIGN_BITS; + while (num_bits--) + cst->rep0 = (cst->rep0 << 1) | + rc_direct_bit(rc); + prob = p + LZMA_ALIGN; + cst->rep0 <<= LZMA_NUM_ALIGN_BITS; + num_bits = LZMA_NUM_ALIGN_BITS; + } + i = 1; + mi = 1; + while (num_bits--) { + if (rc_get_bit(rc, prob + mi, &mi)) + cst->rep0 |= i; + i <<= 1; + } + } else + cst->rep0 = pos_slot; + if (++(cst->rep0) == 0) + return; + } + + len += LZMA_MATCH_MIN_LEN; + + copy_bytes(wr, cst->rep0, len); +} + + + +STATIC inline int INIT unlzma(unsigned char *buf, int in_len, + int(*fill)(void*, unsigned int), + int(*flush)(void*, unsigned int), + unsigned char *output, + int *posp, + void(*error_fn)(char *x) + ) +{ + struct lzma_header header; + int lc, pb, lp; + uint32_t pos_state_mask; + uint32_t literal_pos_mask; + uint16_t *p; + int num_probs; + struct rc rc; + int i, mi; + struct writer wr; + struct cstate cst; + unsigned char *inbuf; + int ret = -1; + + set_error_fn(error_fn); + if (!flush) + in_len -= 4; /* Uncompressed size hack active in pre-boot + environment */ + if (buf) + inbuf = buf; + else + inbuf = malloc(LZMA_IOBUF_SIZE); + if (!inbuf) { + error("Could not allocate input bufer"); + goto exit_0; + } + + cst.state = 0; + cst.rep0 = cst.rep1 = cst.rep2 = cst.rep3 = 1; + + wr.header = &header; + wr.flush = flush; + wr.global_pos = 0; + wr.previous_byte = 0; + wr.buffer_pos = 0; + + rc_init(&rc, fill, inbuf, in_len); + + for (i = 0; i < sizeof(header); i++) { + if (rc.ptr >= rc.buffer_end) + rc_read(&rc); + ((unsigned char *)&header)[i] = *rc.ptr++; + } + + if (header.pos >= (9 * 5 * 5)) + error("bad header"); + + mi = 0; + lc = header.pos; + while (lc >= 9) { + mi++; + lc -= 9; + } + pb = 0; + lp = mi; + while (lp >= 5) { + pb++; + lp -= 5; + } + pos_state_mask = (1 << pb) - 1; + literal_pos_mask = (1 << lp) - 1; + + ENDIAN_CONVERT(header.dict_size); + ENDIAN_CONVERT(header.dst_size); + + if (header.dict_size == 0) + header.dict_size = 1; + + if (output) + wr.buffer = output; + else { + wr.bufsize = MIN(header.dst_size, header.dict_size); + wr.buffer = large_malloc(wr.bufsize); + } + if (wr.buffer == NULL) + goto exit_1; + + num_probs = LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)); + p = (uint16_t *) large_malloc(num_probs * sizeof(*p)); + if (p == 0) + goto exit_2; + num_probs = LZMA_LITERAL + (LZMA_LIT_SIZE << (lc + lp)); + for (i = 0; i < num_probs; i++) + p[i] = (1 << RC_MODEL_TOTAL_BITS) >> 1; + + rc_init_code(&rc); + + while (get_pos(&wr) < header.dst_size) { + int pos_state = get_pos(&wr) & pos_state_mask; + uint16_t *prob = p + LZMA_IS_MATCH + + (cst.state << LZMA_NUM_POS_BITS_MAX) + pos_state; + if (rc_is_bit_0(&rc, prob)) + process_bit0(&wr, &rc, &cst, p, pos_state, prob, + lc, literal_pos_mask); + else { + process_bit1(&wr, &rc, &cst, p, pos_state, prob); + if (cst.rep0 == 0) + break; + } + } + + if (posp) + *posp = rc.ptr-rc.buffer; + if (wr.flush) + wr.flush(wr.buffer, wr.buffer_pos); + ret = 0; + large_free(p); +exit_2: + if (!output) + large_free(wr.buffer); +exit_1: + if (!buf) + free(inbuf); +exit_0: + return ret; +} + +#define decompress unlzma diff --git a/lib/zlib_inflate/inflate.h b/lib/zlib_inflate/inflate.h index df8a6c92052..3d17b3d1b21 100644 --- a/lib/zlib_inflate/inflate.h +++ b/lib/zlib_inflate/inflate.h @@ -1,3 +1,6 @@ +#ifndef INFLATE_H +#define INFLATE_H + /* inflate.h -- internal inflate state definition * Copyright (C) 1995-2004 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h @@ -105,3 +108,4 @@ struct inflate_state { unsigned short work[288]; /* work area for code table building */ code codes[ENOUGH]; /* space for code tables */ }; +#endif diff --git a/lib/zlib_inflate/inftrees.h b/lib/zlib_inflate/inftrees.h index 5f5219b1240..b70b4731ac7 100644 --- a/lib/zlib_inflate/inftrees.h +++ b/lib/zlib_inflate/inftrees.h @@ -1,3 +1,6 @@ +#ifndef INFTREES_H +#define INFTREES_H + /* inftrees.h -- header to use inftrees.c * Copyright (C) 1995-2005 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h @@ -53,3 +56,4 @@ typedef enum { extern int zlib_inflate_table (codetype type, unsigned short *lens, unsigned codes, code **table, unsigned *bits, unsigned short *work); +#endif diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index e06365775bd..3b949a35447 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -186,3 +186,17 @@ quiet_cmd_gzip = GZIP $@ cmd_gzip = gzip -f -9 < $< > $@ +# Bzip2 +# --------------------------------------------------------------------------- + +# Bzip2 does not include size in file... so we have to fake that +size_append=$(CONFIG_SHELL) $(srctree)/scripts/bin_size + +quiet_cmd_bzip2 = BZIP2 $@ +cmd_bzip2 = (bzip2 -9 < $< && $(size_append) $<) > $@ || (rm -f $@ ; false) + +# Lzma +# --------------------------------------------------------------------------- + +quiet_cmd_lzma = LZMA $@ +cmd_lzma = (lzma -9 -c $< && $(size_append) $<) >$@ || (rm -f $@ ; false) diff --git a/scripts/bin_size b/scripts/bin_size new file mode 100644 index 00000000000..43e1b360cee --- /dev/null +++ b/scripts/bin_size @@ -0,0 +1,10 @@ +#!/bin/sh + +if [ $# = 0 ] ; then + echo Usage: $0 file +fi + +size_dec=`stat -c "%s" $1` +size_hex_echo_string=`printf "%08x" $size_dec | + sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g'` +/bin/echo -ne $size_hex_echo_string diff --git a/scripts/gen_initramfs_list.sh b/scripts/gen_initramfs_list.sh index 5f3415f2873..3eea8f15131 100644 --- a/scripts/gen_initramfs_list.sh +++ b/scripts/gen_initramfs_list.sh @@ -5,7 +5,7 @@ # Released under the terms of the GNU GPL # # Generate a cpio packed initramfs. It uses gen_init_cpio to generate -# the cpio archive, and gzip to pack it. +# the cpio archive, and then compresses it. # The script may also be used to generate the inputfile used for gen_init_cpio # This script assumes that gen_init_cpio is located in usr/ directory @@ -16,8 +16,8 @@ usage() { cat << EOF Usage: $0 [-o <file>] [-u <uid>] [-g <gid>] {-d | <cpio_source>} ... - -o <file> Create gzipped initramfs file named <file> using - gen_init_cpio and gzip + -o <file> Create compressed initramfs file named <file> using + gen_init_cpio and compressor depending on the extension -u <uid> User ID to map to user ID 0 (root). <uid> is only meaningful if <cpio_source> is a directory. "squash" forces all files to uid 0. @@ -225,6 +225,7 @@ cpio_list= output="/dev/stdout" output_file="" is_cpio_compressed= +compr="gzip -9 -f" arg="$1" case "$arg" in @@ -233,11 +234,15 @@ case "$arg" in echo "deps_initramfs := \\" shift ;; - "-o") # generate gzipped cpio image named $1 + "-o") # generate compressed cpio image named $1 shift output_file="$1" cpio_list="$(mktemp ${TMPDIR:-/tmp}/cpiolist.XXXXXX)" output=${cpio_list} + echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f" + echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f" + echo "$output_file" | grep -q "\.lzma$" && compr="lzma -9 -f" + echo "$output_file" | grep -q "\.cpio$" && compr="cat" shift ;; esac @@ -274,7 +279,7 @@ while [ $# -gt 0 ]; do esac done -# If output_file is set we will generate cpio archive and gzip it +# If output_file is set we will generate cpio archive and compress it # we are carefull to delete tmp files if [ ! -z ${output_file} ]; then if [ -z ${cpio_file} ]; then @@ -287,7 +292,8 @@ if [ ! -z ${output_file} ]; then if [ "${is_cpio_compressed}" = "compressed" ]; then cat ${cpio_tfile} > ${output_file} else - cat ${cpio_tfile} | gzip -f -9 - > ${output_file} + (cat ${cpio_tfile} | ${compr} - > ${output_file}) \ + || (rm -f ${output_file} ; false) fi [ -z ${cpio_file} ] && rm ${cpio_tfile} fi diff --git a/usr/Kconfig b/usr/Kconfig index 86cecb59dd0..43a3a0fe8f2 100644 --- a/usr/Kconfig +++ b/usr/Kconfig @@ -44,3 +44,92 @@ config INITRAMFS_ROOT_GID owned by group root in the initial ramdisk image. If you are not sure, leave it set to "0". + +config RD_GZIP + bool "Initial ramdisk compressed using gzip" + default y + depends on BLK_DEV_INITRD=y + select DECOMPRESS_GZIP + help + Support loading of a gzip encoded initial ramdisk or cpio buffer. + If unsure, say Y. + +config RD_BZIP2 + bool "Initial ramdisk compressed using bzip2" + default n + depends on BLK_DEV_INITRD=y + select DECOMPRESS_BZIP2 + help + Support loading of a bzip2 encoded initial ramdisk or cpio buffer + If unsure, say N. + +config RD_LZMA + bool "Initial ramdisk compressed using lzma" + default n + depends on BLK_DEV_INITRD=y + select DECOMPRESS_LZMA + help + Support loading of a lzma encoded initial ramdisk or cpio buffer + If unsure, say N. + +choice + prompt "Built-in initramfs compression mode" + help + This setting is only meaningful if the INITRAMFS_SOURCE is + set. It decides by which algorithm the INITRAMFS_SOURCE will + be compressed. + Several compression algorithms are available, which differ + in efficiency, compression and decompression speed. + Compression speed is only relevant when building a kernel. + Decompression speed is relevant at each boot. + + If you have any problems with bzip2 or lzma compressed + initramfs, mail me (Alain Knaff) <alain@knaff.lu>. + + High compression options are mostly useful for users who + are low on disk space (embedded systems), but for whom ram + size matters less. + + If in doubt, select 'gzip' + +config INITRAMFS_COMPRESSION_NONE + bool "None" + help + Do not compress the built-in initramfs at all. This may + sound wasteful in space, but, you should be aware that the + built-in initramfs will be compressed at a later stage + anyways along with the rest of the kernel, on those + architectures that support this. + However, not compressing the initramfs may lead to slightly + higher memory consumption during a short time at boot, while + both the cpio image and the unpacked filesystem image will + be present in memory simultaneously + +config INITRAMFS_COMPRESSION_GZIP + bool "Gzip" + depends on RD_GZIP + help + The old and tried gzip compression. Its compression ratio is + the poorest among the 3 choices; however its speed (both + compression and decompression) is the fastest. + +config INITRAMFS_COMPRESSION_BZIP2 + bool "Bzip2" + depends on RD_BZIP2 + help + Its compression ratio and speed is intermediate. + Decompression speed is slowest among the three. The initramfs + size is about 10% smaller with bzip2, in comparison to gzip. + Bzip2 uses a large amount of memory. For modern kernels you + will need at least 8MB RAM or more for booting. + +config INITRAMFS_COMPRESSION_LZMA + bool "LZMA" + depends on RD_LZMA + help + The most recent compression algorithm. + Its ratio is best, decompression speed is between the other + two. Compression is slowest. The initramfs size is about 33% + smaller with LZMA in comparison to gzip. + +endchoice diff --git a/usr/Makefile b/usr/Makefile index 201f27f8cba..b84894b3929 100644 --- a/usr/Makefile +++ b/usr/Makefile @@ -6,13 +6,25 @@ klibcdirs:; PHONY += klibcdirs +# No compression +suffix_$(CONFIG_INITRAMFS_COMPRESSION_NONE) = + +# Gzip, but no bzip2 +suffix_$(CONFIG_INITRAMFS_COMPRESSION_GZIP) = .gz + +# Bzip2 +suffix_$(CONFIG_INITRAMFS_COMPRESSION_BZIP2) = .bz2 + +# Lzma +suffix_$(CONFIG_INITRAMFS_COMPRESSION_LZMA) = .lzma + # Generate builtin.o based on initramfs_data.o -obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data.o +obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data$(suffix_y).o -# initramfs_data.o contains the initramfs_data.cpio.gz image. +# initramfs_data.o contains the compressed initramfs_data.cpio image. # The image is included using .incbin, a dependency which is not # tracked automatically. -$(obj)/initramfs_data.o: $(obj)/initramfs_data.cpio.gz FORCE +$(obj)/initramfs_data$(suffix_y).o: $(obj)/initramfs_data.cpio$(suffix_y) FORCE ##### # Generate the initramfs cpio archive @@ -25,28 +37,28 @@ ramfs-args := \ $(if $(CONFIG_INITRAMFS_ROOT_UID), -u $(CONFIG_INITRAMFS_ROOT_UID)) \ $(if $(CONFIG_INITRAMFS_ROOT_GID), -g $(CONFIG_INITRAMFS_ROOT_GID)) -# .initramfs_data.cpio.gz.d is used to identify all files included +# .initramfs_data.cpio.d is used to identify all files included # in initramfs and to detect if any files are added/removed. # Removed files are identified by directory timestamp being updated # The dependency list is generated by gen_initramfs.sh -l -ifneq ($(wildcard $(obj)/.initramfs_data.cpio.gz.d),) - include $(obj)/.initramfs_data.cpio.gz.d +ifneq ($(wildcard $(obj)/.initramfs_data.cpio.d),) + include $(obj)/.initramfs_data.cpio.d endif quiet_cmd_initfs = GEN $@ cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input) -targets := initramfs_data.cpio.gz +targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 initramfs_data.cpio.lzma initramfs_data.cpio # do not try to update files included in initramfs $(deps_initramfs): ; $(deps_initramfs): klibcdirs -# We rebuild initramfs_data.cpio.gz if: -# 1) Any included file is newer then initramfs_data.cpio.gz +# We rebuild initramfs_data.cpio if: +# 1) Any included file is newer then initramfs_data.cpio # 2) There are changes in which files are included (added or deleted) -# 3) If gen_init_cpio are newer than initramfs_data.cpio.gz +# 3) If gen_init_cpio are newer than initramfs_data.cpio # 4) arguments to gen_initramfs.sh changes -$(obj)/initramfs_data.cpio.gz: $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs - $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.gz.d +$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs + $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.d $(call if_changed,initfs) diff --git a/usr/initramfs_data.S b/usr/initramfs_data.S index c2e1ad424f4..7c6973d8d82 100644 --- a/usr/initramfs_data.S +++ b/usr/initramfs_data.S @@ -26,5 +26,5 @@ SECTIONS */ .section .init.ramfs,"a" -.incbin "usr/initramfs_data.cpio.gz" +.incbin "usr/initramfs_data.cpio" diff --git a/usr/initramfs_data.bz2.S b/usr/initramfs_data.bz2.S new file mode 100644 index 00000000000..bc54d090365 --- /dev/null +++ b/usr/initramfs_data.bz2.S @@ -0,0 +1,29 @@ +/* + initramfs_data includes the compressed binary that is the + filesystem used for early user space. + Note: Older versions of "as" (prior to binutils 2.11.90.0.23 + released on 2001-07-14) dit not support .incbin. + If you are forced to use older binutils than that then the + following trick can be applied to create the resulting binary: + + + ld -m elf_i386 --format binary --oformat elf32-i386 -r \ + -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o + ld -m elf_i386 -r -o built-in.o initramfs_data.o + + initramfs_data.scr looks like this: +SECTIONS +{ + .init.ramfs : { *(.data) } +} + + The above example is for i386 - the parameters vary from architectures. + Eventually look up LDFLAGS_BLOB in an older version of the + arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced. + + Using .incbin has the advantage over ld that the correct flags are set + in the ELF header, as required by certain architectures. +*/ + +.section .init.ramfs,"a" +.incbin "usr/initramfs_data.cpio.bz2" diff --git a/usr/initramfs_data.gz.S b/usr/initramfs_data.gz.S new file mode 100644 index 00000000000..890c8dd1d6b --- /dev/null +++ b/usr/initramfs_data.gz.S @@ -0,0 +1,29 @@ +/* + initramfs_data includes the compressed binary that is the + filesystem used for early user space. + Note: Older versions of "as" (prior to binutils 2.11.90.0.23 + released on 2001-07-14) dit not support .incbin. + If you are forced to use older binutils than that then the + following trick can be applied to create the resulting binary: + + + ld -m elf_i386 --format binary --oformat elf32-i386 -r \ + -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o + ld -m elf_i386 -r -o built-in.o initramfs_data.o + + initramfs_data.scr looks like this: +SECTIONS +{ + .init.ramfs : { *(.data) } +} + + The above example is for i386 - the parameters vary from architectures. + Eventually look up LDFLAGS_BLOB in an older version of the + arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced. + + Using .incbin has the advantage over ld that the correct flags are set + in the ELF header, as required by certain architectures. +*/ + +.section .init.ramfs,"a" +.incbin "usr/initramfs_data.cpio.gz" diff --git a/usr/initramfs_data.lzma.S b/usr/initramfs_data.lzma.S new file mode 100644 index 00000000000..e11469e4856 --- /dev/null +++ b/usr/initramfs_data.lzma.S @@ -0,0 +1,29 @@ +/* + initramfs_data includes the compressed binary that is the + filesystem used for early user space. + Note: Older versions of "as" (prior to binutils 2.11.90.0.23 + released on 2001-07-14) dit not support .incbin. + If you are forced to use older binutils than that then the + following trick can be applied to create the resulting binary: + + + ld -m elf_i386 --format binary --oformat elf32-i386 -r \ + -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o + ld -m elf_i386 -r -o built-in.o initramfs_data.o + + initramfs_data.scr looks like this: +SECTIONS +{ + .init.ramfs : { *(.data) } +} + + The above example is for i386 - the parameters vary from architectures. + Eventually look up LDFLAGS_BLOB in an older version of the + arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced. + + Using .incbin has the advantage over ld that the correct flags are set + in the ELF header, as required by certain architectures. +*/ + +.section .init.ramfs,"a" +.incbin "usr/initramfs_data.cpio.lzma" |