diff options
98 files changed, 2325 insertions, 1410 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 9f9de3e9582..2a3a7ea5958 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -3,7 +3,7 @@ # see Documentation/kbuild/kconfig-language.txt. # -mainmenu "uClinux/Blackfin (w/o MMU) Kernel Configuration" +mainmenu "Blackfin Kernel Configuration" config MMU bool @@ -29,10 +29,6 @@ config ZONE_DMA bool default y -config BFIN - bool - default y - config SEMAPHORE_SLEEPERS bool default y @@ -50,7 +46,7 @@ config GENERIC_HARDIRQS default y config GENERIC_IRQ_PROBE - bool + bool default y config GENERIC_TIME @@ -69,11 +65,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config IRQCHIP_DEMUX_GPIO - bool - depends on (BF52x || BF53x || BF561 || BF54x) - default y - source "init/Kconfig" source "kernel/Kconfig.preempt" @@ -140,6 +131,11 @@ config BF544 help BF544 Processor Support. +config BF547 + bool "BF547" + help + BF547 Processor Support. + config BF548 bool "BF548" help @@ -166,11 +162,11 @@ choice config BF_REV_0_0 bool "0.0" - depends on (BF549 || BF527) + depends on (BF52x || BF54x) config BF_REV_0_1 - bool "0.2" - depends on (BF549 || BF527) + bool "0.1" + depends on (BF52x || BF54x) config BF_REV_0_2 bool "0.2" @@ -208,7 +204,7 @@ config BF53x config BF54x bool - depends on (BF542 || BF544 || BF548 || BF549) + depends on (BF542 || BF544 || BF547 || BF548 || BF549) default y config BFIN_DUAL_CORE @@ -221,95 +217,6 @@ config BFIN_SINGLE_CORE depends on !BFIN_DUAL_CORE default y -choice - prompt "System type" - default BFIN533_STAMP - help - Do NOT change the board here. Please use the top level - configuration to ensure that all the other settings are - correct. - -config BFIN527_EZKIT - bool "BF527-EZKIT" - depends on (BF522 || BF525 || BF527) - help - BF533-EZKIT-LITE board Support. - -config BFIN533_EZKIT - bool "BF533-EZKIT" - depends on (BF533 || BF532 || BF531) - help - BF533-EZKIT-LITE board Support. - -config BFIN533_STAMP - bool "BF533-STAMP" - depends on (BF533 || BF532 || BF531) - help - BF533-STAMP board Support. - -config BFIN537_STAMP - bool "BF537-STAMP" - depends on (BF537 || BF536 || BF534) - help - BF537-STAMP board Support. - -config BFIN533_BLUETECHNIX_CM - bool "Bluetechnix CM-BF533" - depends on (BF533) - help - CM-BF533 support for EVAL- and DEV-Board. - -config BFIN537_BLUETECHNIX_CM - bool "Bluetechnix CM-BF537" - depends on (BF537) - help - CM-BF537 support for EVAL- and DEV-Board. - -config BFIN548_EZKIT - bool "BF548-EZKIT" - depends on (BF548 || BF549) - help - BFIN548-EZKIT board Support. - -config BFIN561_BLUETECHNIX_CM - bool "Bluetechnix CM-BF561" - depends on (BF561) - help - CM-BF561 support for EVAL- and DEV-Board. - -config BFIN561_EZKIT - bool "BF561-EZKIT" - depends on (BF561) - help - BF561-EZKIT-LITE board Support. - -config BFIN561_TEPLA - bool "BF561-TEPLA" - depends on (BF561) - help - BF561-TEPLA board Support. - -config PNAV10 - bool "PNAV 1.0 board" - depends on (BF537) - help - PNAV 1.0 board Support. - -config H8606_HVSISTEMAS - bool "HV Sistemas H8606" - depends on (BF532) - help - HV Sistemas H8606 board support. - -config GENERIC_BOARD - bool "Custom" - depends on (BF537 || BF536 \ - || BF534 || BF561 || BF535 || BF533 || BF532 || BF531) - help - GENERIC or Custom board Support. - -endchoice - config MEM_GENERIC_BOARD bool depends on GENERIC_BOARD @@ -389,9 +296,9 @@ config BFIN_KERNEL_CLOCK configuration. config PLL_BYPASS - bool "Bypass PLL" - depends on BFIN_KERNEL_CLOCK - default n + bool "Bypass PLL" + depends on BFIN_KERNEL_CLOCK + default n config CLKIN_HALF bool "Half Clock In" @@ -468,11 +375,11 @@ config MAX_VCO_HZ default 500000000 if BF534 default 400000000 if BF536 default 600000000 if BF537 - default 533000000 if BF538 - default 533000000 if BF539 + default 533333333 if BF538 + default 533333333 if BF539 default 600000000 if BF542 - default 533000000 if BF544 - default 533000000 if BF549 + default 533333333 if BF544 + default 533333333 if BF549 default 600000000 if BF561 config MIN_VCO_HZ @@ -481,7 +388,7 @@ config MIN_VCO_HZ config MAX_SCLK_HZ int - default 133000000 + default 133333333 config MIN_SCLK_HZ int @@ -959,6 +866,20 @@ config BANK_3 default 0x99B3 endmenu +config EBIU_MBSCTLVAL + hex "EBIU Bank Select Control Register" + depends on BF54x + default 0 + +config EBIU_MODEVAL + hex "Flash Memory Mode Control Register" + depends on BF54x + default 1 + +config EBIU_FCTLVAL + hex "Flash Memory Bank Control Register" + depends on BF54x + default 6 endmenu ############################################################################# @@ -1075,174 +996,7 @@ source "fs/Kconfig" source "kernel/Kconfig.instrumentation" -menu "Kernel hacking" - -source "lib/Kconfig.debug" - -config DEBUG_HWERR - bool "Hardware error interrupt debugging" - depends on DEBUG_KERNEL - help - When enabled, the hardware error interrupt is never disabled, and - will happen immediately when an error condition occurs. This comes - at a slight cost in code size, but is necessary if you are getting - hardware error interrupts and need to know where they are coming - from. - -config DEBUG_ICACHE_CHECK - bool "Check Instruction cache coherency" - depends on DEBUG_KERNEL - depends on DEBUG_HWERR - help - Say Y here if you are getting weird unexplained errors. This will - ensure that icache is what SDRAM says it should be by doing a - byte wise comparison between SDRAM and instruction cache. This - also relocates the irq_panic() function to L1 memory, (which is - un-cached). - -config DEBUG_HUNT_FOR_ZERO - bool "Catch NULL pointer reads/writes" - default y - help - Say Y here to catch reads/writes to anywhere in the memory range - from 0x0000 - 0x0FFF (the first 4k) of memory. This is useful in - catching common programming errors such as NULL pointer dereferences. - - Misbehaving applications will be killed (generate a SEGV) while the - kernel will trigger a panic. - - Enabling this option will take up an extra entry in CPLB table. - Otherwise, there is no extra overhead. - -config DEBUG_BFIN_HWTRACE_ON - bool "Turn on Blackfin's Hardware Trace" - default y - help - All Blackfins include a Trace Unit which stores a history of the last - 16 changes in program flow taken by the program sequencer. The history - allows the user to recreate the program sequencer’s recent path. This - can be handy when an application dies - we print out the execution - path of how it got to the offending instruction. - - By turning this off, you may save a tiny amount of power. - -choice - prompt "Omit loop Tracing" - default DEBUG_BFIN_HWTRACE_COMPRESSION_OFF - depends on DEBUG_BFIN_HWTRACE_ON - help - The trace buffer can be configured to omit recording of changes in - program flow that match either the last entry or one of the last - two entries. Omitting one of these entries from the record prevents - the trace buffer from overflowing because of any sort of loop (for, do - while, etc) in the program. - - Because zero-overhead Hardware loops are not recorded in the trace buffer, - this feature can be used to prevent trace overflow from loops that - are nested four deep. - -config DEBUG_BFIN_HWTRACE_COMPRESSION_OFF - bool "Trace all Loops" - help - The trace buffer records all changes of flow - -config DEBUG_BFIN_HWTRACE_COMPRESSION_ONE - bool "Compress single-level loops" - help - The trace buffer does not record single loops - helpful if trace - is spinning on a while or do loop. - -config DEBUG_BFIN_HWTRACE_COMPRESSION_TWO - bool "Compress two-level loops" - help - The trace buffer does not record loops two levels deep. Helpful if - the trace is spinning in a nested loop - -endchoice - -config DEBUG_BFIN_HWTRACE_COMPRESSION - int - depends on DEBUG_BFIN_HWTRACE_ON - default 0 if DEBUG_BFIN_HWTRACE_COMPRESSION_OFF - default 1 if DEBUG_BFIN_HWTRACE_COMPRESSION_ONE - default 2 if DEBUG_BFIN_HWTRACE_COMPRESSION_TWO - - -config DEBUG_BFIN_HWTRACE_EXPAND - bool "Expand Trace Buffer greater than 16 entries" - depends on DEBUG_BFIN_HWTRACE_ON - default n - help - By selecting this option, every time the 16 hardware entries in - the Blackfin's HW Trace buffer are full, the kernel will move them - into a software buffer, for dumping when there is an issue. This - has a great impact on performance, (an interrupt every 16 change of - flows) and should normally be turned off, except in those nasty - debugging sessions - -config DEBUG_BFIN_HWTRACE_EXPAND_LEN - int "Size of Trace buffer (in power of 2k)" - range 0 4 - depends on DEBUG_BFIN_HWTRACE_EXPAND - default 1 - help - This sets the size of the software buffer that the trace information - is kept in. - 0 for (2^0) 1k, or 256 entries, - 1 for (2^1) 2k, or 512 entries, - 2 for (2^2) 4k, or 1024 entries, - 3 for (2^3) 8k, or 2048 entries, - 4 for (2^4) 16k, or 4096 entries - -config DEBUG_BFIN_NO_KERN_HWTRACE - bool "Trace user apps (turn off hwtrace in kernel)" - depends on DEBUG_BFIN_HWTRACE_ON - default n - help - Some pieces of the kernel contain a lot of flow changes which can - quickly fill up the hardware trace buffer. When debugging crashes, - the hardware trace may indicate that the problem lies in kernel - space when in reality an application is buggy. - - Say Y here to disable hardware tracing in some known "jumpy" pieces - of code so that the trace buffer will extend further back. - -config EARLY_PRINTK - bool "Early printk" - default n - help - This option enables special console drivers which allow the kernel - to print messages very early in the bootup process. - - This is useful for kernel debugging when your machine crashes very - early before the console code is initialized. After enabling this - feature, you must add "earlyprintk=serial,uart0,57600" to the - command line (bootargs). It is safe to say Y here in all cases, as - all of this lives in the init section and is thrown away after the - kernel boots completely. - -config DUAL_CORE_TEST_MODULE - tristate "Dual Core Test Module" - depends on (BF561) - default n - help - Say Y here to build-in dual core test module for dual core test. - -config CPLB_INFO - bool "Display the CPLB information" - help - Display the CPLB information. - -config ACCESS_CHECK - bool "Check the user pointer address" - default y - help - Usually the pointer transfer from user space is checked to see if its - address is in the kernel space. - - Say N here to disable that check to improve the performance. - -endmenu +source "arch/blackfin/Kconfig.debug" source "security/Kconfig" diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug new file mode 100644 index 00000000000..59b87a483c6 --- /dev/null +++ b/arch/blackfin/Kconfig.debug @@ -0,0 +1,178 @@ +menu "Kernel hacking" + +source "lib/Kconfig.debug" + +config DEBUG_MMRS + bool "Generate Blackfin MMR tree" + select DEBUG_FS + help + Create a tree of Blackfin MMRs via the debugfs tree. If + you enable this, you will find all MMRs laid out in the + /sys/kernel/debug/blackfin/ directory where you can read/write + MMRs directly from userspace. This is obviously just a debug + feature. + +config DEBUG_HWERR + bool "Hardware error interrupt debugging" + depends on DEBUG_KERNEL + help + When enabled, the hardware error interrupt is never disabled, and + will happen immediately when an error condition occurs. This comes + at a slight cost in code size, but is necessary if you are getting + hardware error interrupts and need to know where they are coming + from. + +config DEBUG_ICACHE_CHECK + bool "Check Instruction cache coherency" + depends on DEBUG_KERNEL + depends on DEBUG_HWERR + help + Say Y here if you are getting weird unexplained errors. This will + ensure that icache is what SDRAM says it should be by doing a + byte wise comparison between SDRAM and instruction cache. This + also relocates the irq_panic() function to L1 memory, (which is + un-cached). + +config DEBUG_HUNT_FOR_ZERO + bool "Catch NULL pointer reads/writes" + default y + help + Say Y here to catch reads/writes to anywhere in the memory range + from 0x0000 - 0x0FFF (the first 4k) of memory. This is useful in + catching common programming errors such as NULL pointer dereferences. + + Misbehaving applications will be killed (generate a SEGV) while the + kernel will trigger a panic. + + Enabling this option will take up an extra entry in CPLB table. + Otherwise, there is no extra overhead. + +config DEBUG_BFIN_HWTRACE_ON + bool "Turn on Blackfin's Hardware Trace" + default y + help + All Blackfins include a Trace Unit which stores a history of the last + 16 changes in program flow taken by the program sequencer. The history + allows the user to recreate the program sequencer’s recent path. This + can be handy when an application dies - we print out the execution + path of how it got to the offending instruction. + + By turning this off, you may save a tiny amount of power. + +choice + prompt "Omit loop Tracing" + default DEBUG_BFIN_HWTRACE_COMPRESSION_OFF + depends on DEBUG_BFIN_HWTRACE_ON + help + The trace buffer can be configured to omit recording of changes in + program flow that match either the last entry or one of the last + two entries. Omitting one of these entries from the record prevents + the trace buffer from overflowing because of any sort of loop (for, do + while, etc) in the program. + + Because zero-overhead Hardware loops are not recorded in the trace buffer, + this feature can be used to prevent trace overflow from loops that + are nested four deep. + +config DEBUG_BFIN_HWTRACE_COMPRESSION_OFF + bool "Trace all Loops" + help + The trace buffer records all changes of flow + +config DEBUG_BFIN_HWTRACE_COMPRESSION_ONE + bool "Compress single-level loops" + help + The trace buffer does not record single loops - helpful if trace + is spinning on a while or do loop. + +config DEBUG_BFIN_HWTRACE_COMPRESSION_TWO + bool "Compress two-level loops" + help + The trace buffer does not record loops two levels deep. Helpful if + the trace is spinning in a nested loop + +endchoice + +config DEBUG_BFIN_HWTRACE_COMPRESSION + int + depends on DEBUG_BFIN_HWTRACE_ON + default 0 if DEBUG_BFIN_HWTRACE_COMPRESSION_OFF + default 1 if DEBUG_BFIN_HWTRACE_COMPRESSION_ONE + default 2 if DEBUG_BFIN_HWTRACE_COMPRESSION_TWO + + +config DEBUG_BFIN_HWTRACE_EXPAND + bool "Expand Trace Buffer greater than 16 entries" + depends on DEBUG_BFIN_HWTRACE_ON + default n + help + By selecting this option, every time the 16 hardware entries in + the Blackfin's HW Trace buffer are full, the kernel will move them + into a software buffer, for dumping when there is an issue. This + has a great impact on performance, (an interrupt every 16 change of + flows) and should normally be turned off, except in those nasty + debugging sessions + +config DEBUG_BFIN_HWTRACE_EXPAND_LEN + int "Size of Trace buffer (in power of 2k)" + range 0 4 + depends on DEBUG_BFIN_HWTRACE_EXPAND + default 1 + help + This sets the size of the software buffer that the trace information + is kept in. + 0 for (2^0) 1k, or 256 entries, + 1 for (2^1) 2k, or 512 entries, + 2 for (2^2) 4k, or 1024 entries, + 3 for (2^3) 8k, or 2048 entries, + 4 for (2^4) 16k, or 4096 entries + +config DEBUG_BFIN_NO_KERN_HWTRACE + bool "Trace user apps (turn off hwtrace in kernel)" + depends on DEBUG_BFIN_HWTRACE_ON + default n + help + Some pieces of the kernel contain a lot of flow changes which can + quickly fill up the hardware trace buffer. When debugging crashes, + the hardware trace may indicate that the problem lies in kernel + space when in reality an application is buggy. + + Say Y here to disable hardware tracing in some known "jumpy" pieces + of code so that the trace buffer will extend further back. + +config EARLY_PRINTK + bool "Early printk" + default n + help + This option enables special console drivers which allow the kernel + to print messages very early in the bootup process. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. After enabling this + feature, you must add "earlyprintk=serial,uart0,57600" to the + command line (bootargs). It is safe to say Y here in all cases, as + all of this lives in the init section and is thrown away after the + kernel boots completely. + +config DUAL_CORE_TEST_MODULE + tristate "Dual Core Test Module" + depends on (BF561) + default n + help + Say Y here to build-in dual core test module for dual core test. + +config CPLB_INFO + bool "Display the CPLB information" + help + Display the CPLB information. + +config ACCESS_CHECK + bool "Check the user pointer address" + default y + help + Usually the pointer transfer from user space is checked to see if its + address is in the kernel space. + + Say N here to disable that check to improve the performance. + +endmenu diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index f7cac7c51e7..c47e000f832 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -31,6 +31,7 @@ machine-$(CONFIG_BF536) := bf537 machine-$(CONFIG_BF537) := bf537 machine-$(CONFIG_BF542) := bf548 machine-$(CONFIG_BF544) := bf548 +machine-$(CONFIG_BF547) := bf548 machine-$(CONFIG_BF548) := bf548 machine-$(CONFIG_BF549) := bf548 machine-$(CONFIG_BF561) := bf561 @@ -48,6 +49,7 @@ cpu-$(CONFIG_BF536) := bf536 cpu-$(CONFIG_BF537) := bf537 cpu-$(CONFIG_BF542) := bf542 cpu-$(CONFIG_BF544) := bf544 +cpu-$(CONFIG_BF547) := bf547 cpu-$(CONFIG_BF548) := bf548 cpu-$(CONFIG_BF549) := bf549 cpu-$(CONFIG_BF561) := bf561 diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 1f6a93df6b3..fa6eb4e00fa 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.9 +# Linux kernel version: 2.6.22.12 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_BFIN=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -18,7 +17,6 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -127,6 +125,7 @@ CONFIG_BF527=y # CONFIG_BF537 is not set # CONFIG_BF542 is not set # CONFIG_BF544 is not set +# CONFIG_BF547 is not set # CONFIG_BF548 is not set # CONFIG_BF549 is not set # CONFIG_BF561 is not set @@ -140,19 +139,8 @@ CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_NONE is not set CONFIG_BF52x=y CONFIG_BFIN_SINGLE_CORE=y -CONFIG_BFIN527_EZKIT=y -# CONFIG_BFIN533_EZKIT is not set -# CONFIG_BFIN533_STAMP is not set -# CONFIG_BFIN537_STAMP is not set -# CONFIG_BFIN533_BLUETECHNIX_CM is not set -# CONFIG_BFIN537_BLUETECHNIX_CM is not set -# CONFIG_BFIN548_EZKIT is not set -# CONFIG_BFIN561_BLUETECHNIX_CM is not set -# CONFIG_BFIN561_EZKIT is not set -# CONFIG_BFIN561_TEPLA is not set -# CONFIG_PNAV10 is not set -# CONFIG_GENERIC_BOARD is not set CONFIG_MEM_MT48LC32M16A2TG_75=y +CONFIG_BFIN527_EZKIT=y # # BF527 Specific Configuration @@ -244,7 +232,7 @@ CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MAX_SCLK_HZ=133000000 CONFIG_MIN_SCLK_HZ=27000000 # @@ -301,6 +289,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -322,7 +311,7 @@ CONFIG_L1_MAX_PIECE=16 # # -# EBIU_AMBCTL Global Control +# EBIU_AMGCTL Global Control # CONFIG_C_AMCKEN=y CONFIG_C_CDPRIO=y @@ -548,6 +537,7 @@ CONFIG_BFIN_NAND_CLE=2 CONFIG_BFIN_NAND_ALE=1 CONFIG_BFIN_NAND_READY=3 CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_BF5XX is not set # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set @@ -637,6 +627,7 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y +# CONFIG_AX88180 is not set # # Wireless LAN @@ -708,7 +699,7 @@ CONFIG_INPUT_MISC=y # CONFIG_SPI_ADC_BF533 is not set # CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set -# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 9e9b420342d..4fdb49362ba 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.6 +# Linux kernel version: 2.6.22.12 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_BFIN=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -18,7 +17,6 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -64,7 +62,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 @@ -117,6 +114,9 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF522 is not set +# CONFIG_BF525 is not set +# CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set CONFIG_BF533=y @@ -125,10 +125,12 @@ CONFIG_BF533=y # CONFIG_BF537 is not set # CONFIG_BF542 is not set # CONFIG_BF544 is not set +# CONFIG_BF547 is not set # CONFIG_BF548 is not set # CONFIG_BF549 is not set # CONFIG_BF561 is not set # CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_4 is not set @@ -137,18 +139,12 @@ CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y CONFIG_BFIN_SINGLE_CORE=y +CONFIG_MEM_MT48LC16M16A2TG_75=y CONFIG_BFIN533_EZKIT=y # CONFIG_BFIN533_STAMP is not set -# CONFIG_BFIN537_STAMP is not set # CONFIG_BFIN533_BLUETECHNIX_CM is not set -# CONFIG_BFIN537_BLUETECHNIX_CM is not set -# CONFIG_BFIN548_EZKIT is not set -# CONFIG_BFIN561_BLUETECHNIX_CM is not set -# CONFIG_BFIN561_EZKIT is not set -# CONFIG_BFIN561_TEPLA is not set -# CONFIG_PNAV10 is not set -# CONFIG_GENERIC_BOARD is not set -CONFIG_MEM_MT48LC16M16A2TG_75=y +# CONFIG_H8606_HVSISTEMAS is not set +# CONFIG_GENERIC_BF533_BOARD is not set # # BF533/2/1 Specific Configuration @@ -198,7 +194,7 @@ CONFIG_CLKIN_HZ=27000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MAX_SCLK_HZ=133000000 CONFIG_MIN_SCLK_HZ=27000000 # @@ -255,6 +251,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -276,7 +273,7 @@ CONFIG_L1_MAX_PIECE=16 # # -# EBIU_AMBCTL Global Control +# EBIU_AMGCTL Global Control # CONFIG_C_AMCKEN=y CONFIG_C_CDPRIO=y @@ -526,14 +523,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_BF5xx=m CONFIG_BFIN_FLASH_SIZE=0x400000 CONFIG_EBIU_FLASH_BASE=0x20000000 - -# -# FLASH_EBIU_AMBCTL Control -# -CONFIG_BFIN_FLASH_BANK_0=0x7BB0 -CONFIG_BFIN_FLASH_BANK_1=0x7BB0 -CONFIG_BFIN_FLASH_BANK_2=0x7BB0 -CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -622,6 +611,7 @@ CONFIG_SMC91X=y # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y +# CONFIG_AX88180 is not set # # Wireless LAN @@ -683,9 +673,9 @@ CONFIG_INPUT_EVDEV=m # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BFIN_PFLAGS is not set +# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set -# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set @@ -708,6 +698,7 @@ CONFIG_SERIAL_BFIN_DMA=y # CONFIG_SERIAL_BFIN_PIO is not set CONFIG_SERIAL_BFIN_UART0=y # CONFIG_BFIN_UART0_CTSRTS is not set +# CONFIG_SERIAL_BFIN_UART1 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index f59ade98010..b04e8e533e9 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.6 +# Linux kernel version: 2.6.22.12 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_BFIN=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -18,7 +17,6 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -64,7 +62,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 @@ -117,6 +114,9 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF522 is not set +# CONFIG_BF525 is not set +# CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set CONFIG_BF533=y @@ -125,10 +125,12 @@ CONFIG_BF533=y # CONFIG_BF537 is not set # CONFIG_BF542 is not set # CONFIG_BF544 is not set +# CONFIG_BF547 is not set # CONFIG_BF548 is not set # CONFIG_BF549 is not set # CONFIG_BF561 is not set # CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_4 is not set @@ -137,19 +139,13 @@ CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y CONFIG_BFIN_SINGLE_CORE=y +CONFIG_MEM_MT48LC64M4A2FB_7E=y +CONFIG_BFIN_SHARED_FLASH_ENET=y # CONFIG_BFIN533_EZKIT is not set CONFIG_BFIN533_STAMP=y -# CONFIG_BFIN537_STAMP is not set # CONFIG_BFIN533_BLUETECHNIX_CM is not set -# CONFIG_BFIN537_BLUETECHNIX_CM is not set -# CONFIG_BFIN548_EZKIT is not set -# CONFIG_BFIN561_BLUETECHNIX_CM is not set -# CONFIG_BFIN561_EZKIT is not set -# CONFIG_BFIN561_TEPLA is not set -# CONFIG_PNAV10 is not set -# CONFIG_GENERIC_BOARD is not set -CONFIG_MEM_MT48LC64M4A2FB_7E=y -CONFIG_BFIN_SHARED_FLASH_ENET=y +# CONFIG_H8606_HVSISTEMAS is not set +# CONFIG_GENERIC_BF533_BOARD is not set # # BF533/2/1 Specific Configuration @@ -199,7 +195,7 @@ CONFIG_CLKIN_HZ=11059200 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MAX_SCLK_HZ=133000000 CONFIG_MIN_SCLK_HZ=27000000 # @@ -267,6 +263,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -288,7 +285,7 @@ CONFIG_L1_MAX_PIECE=16 # # -# EBIU_AMBCTL Global Control +# EBIU_AMGCTL Global Control # CONFIG_C_AMCKEN=y CONFIG_C_CDPRIO=y @@ -634,6 +631,7 @@ CONFIG_SMC91X=y # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y +# CONFIG_AX88180 is not set # # Wireless LAN @@ -704,9 +702,9 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39 # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BFIN_PFLAGS is not set +# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set -# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set @@ -732,6 +730,7 @@ CONFIG_SERIAL_BFIN_DMA=y # CONFIG_SERIAL_BFIN_PIO is not set CONFIG_SERIAL_BFIN_UART0=y # CONFIG_BFIN_UART0_CTSRTS is not set +# CONFIG_SERIAL_BFIN_UART1 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set @@ -925,6 +924,7 @@ CONFIG_NTSC=y # CONFIG_PAL_YCBCR is not set CONFIG_ADV7393_1XMEM=y # CONFIG_ADV7393_2XMEM is not set +# CONFIG_FB_BFIN_T350MCQB is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_LOGO is not set @@ -979,11 +979,6 @@ CONFIG_SND_BFIN_AD73311_SE=4 # CONFIG_SND_SOC is not set # -# SoC Audio for the ADI Blackfin -# -# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set - -# # Open Sound System # # CONFIG_SOUND_PRIME is not set diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 07eb63dc25e..f812b66318b 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.6 +# Linux kernel version: 2.6.22.12 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_BFIN=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -18,7 +17,6 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -64,7 +62,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 @@ -117,6 +114,9 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF522 is not set +# CONFIG_BF525 is not set +# CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set # CONFIG_BF533 is not set @@ -125,10 +125,12 @@ CONFIG_PREEMPT_VOLUNTARY=y CONFIG_BF537=y # CONFIG_BF542 is not set # CONFIG_BF544 is not set +# CONFIG_BF547 is not set # CONFIG_BF548 is not set # CONFIG_BF549 is not set # CONFIG_BF561 is not set # CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set @@ -137,33 +139,8 @@ CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y CONFIG_BFIN_SINGLE_CORE=y -# CONFIG_BFIN533_EZKIT is not set -# CONFIG_BFIN533_STAMP is not set -CONFIG_BFIN537_STAMP=y -# CONFIG_BFIN533_BLUETECHNIX_CM is not set -# CONFIG_BFIN537_BLUETECHNIX_CM is not set -# CONFIG_BFIN548_EZKIT is not set -# CONFIG_BFIN561_BLUETECHNIX_CM is not set -# CONFIG_BFIN561_EZKIT is not set -# CONFIG_BFIN561_TEPLA is not set -# CONFIG_PNAV10 is not set -# CONFIG_GENERIC_BOARD is not set CONFIG_MEM_MT48LC32M8A2_75=y CONFIG_IRQ_PLL_WAKEUP=7 - -# -# BF537 Specific Configuration -# - -# -# Interrupt Priority Assignment -# - -# -# Priority -# -CONFIG_IRQ_DMA_ERROR=7 -CONFIG_IRQ_ERROR=7 CONFIG_IRQ_RTC=8 CONFIG_IRQ_PPI=8 CONFIG_IRQ_SPORT0_RX=9 @@ -176,8 +153,6 @@ CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 CONFIG_IRQ_UART1_TX=10 -CONFIG_IRQ_CAN_RX=11 -CONFIG_IRQ_CAN_TX=11 CONFIG_IRQ_MAC_RX=11 CONFIG_IRQ_MAC_TX=11 CONFIG_IRQ_TMR0=12 @@ -188,11 +163,31 @@ CONFIG_IRQ_TMR4=12 CONFIG_IRQ_TMR5=12 CONFIG_IRQ_TMR6=12 CONFIG_IRQ_TMR7=12 -CONFIG_IRQ_PROG_INTA=12 CONFIG_IRQ_PORTG_INTB=12 CONFIG_IRQ_MEM_DMA0=13 CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 +CONFIG_BFIN537_STAMP=y +# CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_PNAV10 is not set +# CONFIG_GENERIC_BF537_BOARD is not set + +# +# BF537 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA_ERROR=7 +CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_IRQ_PROG_INTA=12 # # Board customizations @@ -206,7 +201,7 @@ CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MAX_SCLK_HZ=133000000 CONFIG_MIN_SCLK_HZ=27000000 # @@ -263,6 +258,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -284,7 +280,7 @@ CONFIG_L1_MAX_PIECE=16 # # -# EBIU_AMBCTL Global Control +# EBIU_AMGCTL Global Control # CONFIG_C_AMCKEN=y CONFIG_C_CDPRIO=y @@ -534,14 +530,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_BF5xx=m CONFIG_BFIN_FLASH_SIZE=0x400000 CONFIG_EBIU_FLASH_BASE=0x20000000 - -# -# FLASH_EBIU_AMBCTL Control -# -CONFIG_BFIN_FLASH_BANK_0=0x7BB0 -CONFIG_BFIN_FLASH_BANK_1=0x7BB0 -CONFIG_BFIN_FLASH_BANK_2=0x7BB0 -CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -660,6 +648,7 @@ CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y +# CONFIG_AX88180 is not set # # Wireless LAN @@ -730,9 +719,9 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72 # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BFIN_PFLAGS is not set +# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set -# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set @@ -967,6 +956,7 @@ CONFIG_FB_BF537_LQ035=m CONFIG_LQ035_SLAVE_ADDR=0x58 # CONFIG_FB_BFIN_LANDSCAPE is not set # CONFIG_FB_BFIN_BGR is not set +# CONFIG_FB_BFIN_T350MCQB is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_LOGO is not set @@ -1021,11 +1011,6 @@ CONFIG_SND_BFIN_AD73311_SE=4 # CONFIG_SND_SOC is not set # -# SoC Audio for the ADI Blackfin -# -# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set - -# # Open Sound System # # CONFIG_SOUND_PRIME is not set diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 0dd3d2253dc..48367cc9fe3 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,7 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.10 -# Sat Oct 27 02:34:07 2007 +# Linux kernel version: 2.6.22.12 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -9,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_BFIN=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -19,7 +17,6 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -128,6 +125,7 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF537 is not set # CONFIG_BF542 is not set # CONFIG_BF544 is not set +# CONFIG_BF547 is not set # CONFIG_BF548 is not set CONFIG_BF549=y # CONFIG_BF561 is not set @@ -141,19 +139,6 @@ CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_NONE is not set CONFIG_BF54x=y CONFIG_BFIN_SINGLE_CORE=y -# CONFIG_BFIN527_EZKIT is not set -# CONFIG_BFIN533_EZKIT is not set -# CONFIG_BFIN533_STAMP is not set -# CONFIG_BFIN537_STAMP is not set -# CONFIG_BFIN533_BLUETECHNIX_CM is not set -# CONFIG_BFIN537_BLUETECHNIX_CM is not set -CONFIG_BFIN548_EZKIT=y -# CONFIG_BFIN561_BLUETECHNIX_CM is not set -# CONFIG_BFIN561_EZKIT is not set -# CONFIG_BFIN561_TEPLA is not set -# CONFIG_PNAV10 is not set -# CONFIG_H8606_HVSISTEMAS is not set -# CONFIG_GENERIC_BOARD is not set CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_RTC=8 CONFIG_IRQ_SPORT0_RX=9 @@ -180,6 +165,7 @@ CONFIG_IRQ_TIMER7=11 CONFIG_IRQ_TIMER8=11 CONFIG_IRQ_TIMER9=11 CONFIG_IRQ_TIMER10=11 +CONFIG_BFIN548_EZKIT=y # # BF548 Specific Configuration @@ -279,9 +265,9 @@ CONFIG_PINT3_ASSIGN=0x02020303 # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_VCO_HZ=533333333 +CONFIG_MAX_VCO_HZ=533000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MAX_SCLK_HZ=133000000 CONFIG_MIN_SCLK_HZ=27000000 # @@ -376,6 +362,9 @@ CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x5554 CONFIG_BANK_2=0x7BB0 CONFIG_BANK_3=0x99B3 +CONFIG_EBUI_MBSCTLVAL=0x0 +CONFIG_EBUI_MODEVAL=0x1 +CONFIG_EBUI_FCTLVAL=0x6 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -702,6 +691,7 @@ CONFIG_SMSC911X=y # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y +# CONFIG_AX88180 is not set # # Wireless LAN @@ -1058,6 +1048,8 @@ CONFIG_SND_SOC=y CONFIG_SND_BF5XX_SOC=y CONFIG_SND_BF5XX_SOC_AC97=y CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y +# CONFIG_SND_BF5XX_SOC_WM8750 is not set +# CONFIG_SND_BF5XX_SOC_WM8731 is not set CONFIG_SND_BF5XX_SPORT_NUM=0 # CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set CONFIG_SND_SOC_AD1980=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 277d72dac0f..e9f100b45eb 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.6 +# Linux kernel version: 2.6.22.12 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_BFIN=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -18,7 +17,6 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -64,7 +62,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 @@ -117,6 +114,9 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF522 is not set +# CONFIG_BF525 is not set +# CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set # CONFIG_BF533 is not set @@ -125,10 +125,12 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF537 is not set # CONFIG_BF542 is not set # CONFIG_BF544 is not set +# CONFIG_BF547 is not set # CONFIG_BF548 is not set # CONFIG_BF549 is not set CONFIG_BF561=y # CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set # CONFIG_BF_REV_0_2 is not set CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_4 is not set @@ -136,18 +138,15 @@ CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BFIN_DUAL_CORE=y -# CONFIG_BFIN533_EZKIT is not set -# CONFIG_BFIN533_STAMP is not set -# CONFIG_BFIN537_STAMP is not set -# CONFIG_BFIN533_BLUETECHNIX_CM is not set -# CONFIG_BFIN537_BLUETECHNIX_CM is not set -# CONFIG_BFIN548_EZKIT is not set -# CONFIG_BFIN561_BLUETECHNIX_CM is not set +CONFIG_MEM_MT48LC16M16A2TG_75=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_SPORT0_ERROR=7 +CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_SPI_ERROR=7 CONFIG_BFIN561_EZKIT=y # CONFIG_BFIN561_TEPLA is not set -# CONFIG_PNAV10 is not set -# CONFIG_GENERIC_BOARD is not set -CONFIG_MEM_MT48LC16M16A2TG_75=y +# CONFIG_BFIN561_BLUETECHNIX_CM is not set +# CONFIG_GENERIC_BF561_BOARD is not set # # BF561 Specific Configuration @@ -170,15 +169,11 @@ CONFIG_BF561_COREB_RESET=y # # Priority # -CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_DMA1_ERROR=7 CONFIG_IRQ_DMA2_ERROR=7 CONFIG_IRQ_IMDMA_ERROR=7 CONFIG_IRQ_PPI0_ERROR=7 CONFIG_IRQ_PPI1_ERROR=7 -CONFIG_IRQ_SPORT0_ERROR=7 -CONFIG_IRQ_SPORT1_ERROR=7 -CONFIG_IRQ_SPI_ERROR=7 CONFIG_IRQ_UART_ERROR=7 CONFIG_IRQ_RESERVED_ERROR=7 CONFIG_IRQ_DMA1_0=8 @@ -243,7 +238,7 @@ CONFIG_CLKIN_HZ=30000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MAX_SCLK_HZ=133000000 CONFIG_MIN_SCLK_HZ=27000000 # @@ -300,6 +295,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -321,7 +317,7 @@ CONFIG_L1_MAX_PIECE=16 # # -# EBIU_AMBCTL Global Control +# EBIU_AMGCTL Global Control # CONFIG_C_AMCKEN=y CONFIG_C_CDPRIO=y @@ -564,14 +560,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_BF5xx=m CONFIG_BFIN_FLASH_SIZE=0x0400000 CONFIG_EBIU_FLASH_BASE=0x20000000 - -# -# FLASH_EBIU_AMBCTL Control -# -CONFIG_BFIN_FLASH_BANK_0=0x7BB0 -CONFIG_BFIN_FLASH_BANK_1=0x7BB0 -CONFIG_BFIN_FLASH_BANK_2=0x7BB0 -CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -660,6 +648,7 @@ CONFIG_SMC91X=y # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y +# CONFIG_AX88180 is not set # # Wireless LAN @@ -721,9 +710,9 @@ CONFIG_INPUT_EVDEV=m # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BFIN_PFLAGS is not set +# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set -# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig new file mode 100644 index 00000000000..18cbb8c3c37 --- /dev/null +++ b/arch/blackfin/configs/H8606_defconfig @@ -0,0 +1,1160 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22.12 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_NP2 is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF525 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +CONFIG_BF532=y +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +CONFIG_BF_REV_0_5=y +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_BFIN_SINGLE_CORE=y +CONFIG_MEM_MT48LC16M16A2TG_75=y +# CONFIG_BFIN533_EZKIT is not set +# CONFIG_BFIN533_STAMP is not set +# CONFIG_BFIN533_BLUETECHNIX_CM is not set +CONFIG_H8606_HVSISTEMAS=y +# CONFIG_GENERIC_BF533_BOARD is not set + +# +# BF533/2/1 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_UART_ERROR=7 +CONFIG_SPORT0_ERROR=7 +CONFIG_SPI_ERROR=7 +CONFIG_SPORT1_ERROR=7 +CONFIG_PPI_ERROR=7 +CONFIG_DMA_ERROR=7 +CONFIG_PLLWAKE_ERROR=7 +CONFIG_RTC_ERROR=8 +CONFIG_DMA0_PPI=8 +CONFIG_DMA1_SPORT0RX=9 +CONFIG_DMA2_SPORT0TX=9 +CONFIG_DMA3_SPORT1RX=9 +CONFIG_DMA4_SPORT1TX=9 +CONFIG_DMA5_SPI=10 +CONFIG_DMA6_UARTRX=10 +CONFIG_DMA7_UARTTX=10 +CONFIG_TIMER0=11 +CONFIG_TIMER1=11 +CONFIG_TIMER2=11 +CONFIG_PFA=12 +CONFIG_PFB=12 +CONFIG_MEMDMA0=13 +CONFIG_MEMDMA1=13 +CONFIG_WDTIMER=13 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_VCO_HZ=400000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Setup +# +CONFIG_MEM_SIZE=32 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x1000 +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +# CONFIG_CACHELINE_ALIGNED_L1 is not set +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_LARGE_ALLOCS=y +CONFIG_BFIN_GPTIMERS=y +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +CONFIG_BFIN_ICACHE_LOCK=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set +CONFIG_L1_MAX_PIECE=16 + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0x99B3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set +# CONFIG_PM_WAKEUP_GPIO_API is not set +CONFIG_PM_WAKEUP_SIC_IWR=0x100000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_BF5xx is not set +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +CONFIG_MTD_M25P80=y +CONFIG_M25PXX_USE_FAST_READ=y +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +# CONFIG_SMSC911X is not set +CONFIG_DM9000=y +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y +# CONFIG_AX88180 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_BF53X_PFBUTTONS is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +CONFIG_BF5xx_PFLAGS=y +# CONFIG_BF5xx_PFLAGS_PROC is not set +# CONFIG_BF5xx_PPIFCD is not set +CONFIG_BFIN_SIMPLE_TIMER=y +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +CONFIG_BFIN_TIMER_LATENCY=y +# CONFIG_AD5304 is not set +# CONFIG_BF5xx_FBDMA is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +# CONFIG_SERIAL_BFIN_UART1 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_BFIN_WDT is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_GEN_RTC is not set +CONFIG_BLACKFIN_DPMC=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_AT25=y +CONFIG_SPI_SPIDEV=y + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA Blackfin devices +# +CONFIG_SND_BLACKFIN_AD1836=m +CONFIG_SND_BLACKFIN_AD1836_TDM=y +# CONFIG_SND_BLACKFIN_AD1836_I2S is not set +CONFIG_SND_BLACKFIN_AD1836_MULSUB=y +# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set +CONFIG_SND_BLACKFIN_SPORT=0 +CONFIG_SND_BLACKFIN_SPI_PFBIT=4 +# CONFIG_SND_BFIN_AD73311 is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_BFIN=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 3d403e0b82c..25709f504d8 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.6 +# Linux kernel version: 2.6.22.12 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_BFIN=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -18,7 +17,6 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -62,7 +60,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=9 @@ -115,6 +112,9 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF522 is not set +# CONFIG_BF525 is not set +# CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set # CONFIG_BF533 is not set @@ -123,10 +123,12 @@ CONFIG_PREEMPT_VOLUNTARY=y CONFIG_BF537=y # CONFIG_BF542 is not set # CONFIG_BF544 is not set +# CONFIG_BF547 is not set # CONFIG_BF548 is not set # CONFIG_BF549 is not set # CONFIG_BF561 is not set # CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set @@ -135,33 +137,8 @@ CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y CONFIG_BFIN_SINGLE_CORE=y -# CONFIG_BFIN533_EZKIT is not set -# CONFIG_BFIN533_STAMP is not set -# CONFIG_BFIN537_STAMP is not set -# CONFIG_BFIN533_BLUETECHNIX_CM is not set -# CONFIG_BFIN537_BLUETECHNIX_CM is not set -# CONFIG_BFIN548_EZKIT is not set -# CONFIG_BFIN561_BLUETECHNIX_CM is not set -# CONFIG_BFIN561_EZKIT is not set -# CONFIG_BFIN561_TEPLA is not set -CONFIG_PNAV10=y -# CONFIG_GENERIC_BOARD is not set CONFIG_MEM_MT48LC32M8A2_75=y CONFIG_IRQ_PLL_WAKEUP=7 - -# -# BF537 Specific Configuration -# - -# -# Interrupt Priority Assignment -# - -# -# Priority -# -CONFIG_IRQ_DMA_ERROR=7 -CONFIG_IRQ_ERROR=7 CONFIG_IRQ_RTC=8 CONFIG_IRQ_PPI=8 CONFIG_IRQ_SPORT0_RX=9 @@ -174,8 +151,6 @@ CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 CONFIG_IRQ_UART1_TX=10 -CONFIG_IRQ_CAN_RX=11 -CONFIG_IRQ_CAN_TX=11 CONFIG_IRQ_MAC_RX=11 CONFIG_IRQ_MAC_TX=11 CONFIG_IRQ_TMR0=12 @@ -186,11 +161,31 @@ CONFIG_IRQ_TMR4=12 CONFIG_IRQ_TMR5=12 CONFIG_IRQ_TMR6=12 CONFIG_IRQ_TMR7=12 -CONFIG_IRQ_PROG_INTA=12 CONFIG_IRQ_PORTG_INTB=12 CONFIG_IRQ_MEM_DMA0=13 CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 +# CONFIG_BFIN537_STAMP is not set +# CONFIG_BFIN537_BLUETECHNIX_CM is not set +CONFIG_PNAV10=y +# CONFIG_GENERIC_BF537_BOARD is not set + +# +# BF537 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA_ERROR=7 +CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_IRQ_PROG_INTA=12 # # Board customizations @@ -204,7 +199,7 @@ CONFIG_CLKIN_HZ=24576000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MAX_SCLK_HZ=133000000 CONFIG_MIN_SCLK_HZ=27000000 # @@ -261,6 +256,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_LARGE_ALLOCS=y +# CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y @@ -282,7 +278,7 @@ CONFIG_L1_MAX_PIECE=16 # # -# EBIU_AMBCTL Global Control +# EBIU_AMGCTL Global Control # CONFIG_C_AMCKEN=y CONFIG_C_CDPRIO=y @@ -593,6 +589,7 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y +# CONFIG_AX88180 is not set # # Wireless LAN @@ -675,9 +672,9 @@ CONFIG_INPUT_UINPUT=y # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BFIN_PFLAGS is not set +# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set -# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set @@ -897,6 +894,7 @@ CONFIG_FB_BF537_LQ035=y CONFIG_LQ035_SLAVE_ADDR=0x58 CONFIG_FB_BFIN_LANDSCAPE=y # CONFIG_FB_BFIN_BGR is not set +# CONFIG_FB_BFIN_T350MCQB is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_LOGO is not set @@ -939,11 +937,6 @@ CONFIG_SND=m # CONFIG_SND_SOC is not set # -# SoC Audio for the ADI Blackfin -# -# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set - -# # Open Sound System # CONFIG_SOUND_PRIME=y diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 503eef4c7fe..b54446055a4 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -436,6 +436,7 @@ unsigned long get_dma_curr_desc_ptr(unsigned int channel) return dma_ch[channel].regs->curr_desc_ptr; } +EXPORT_SYMBOL(get_dma_curr_desc_ptr); unsigned long get_dma_curr_addr(unsigned int channel) { diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c index 2198afe40f3..0bfbb269e35 100644 --- a/arch/blackfin/kernel/bfin_ksyms.c +++ b/arch/blackfin/kernel/bfin_ksyms.c @@ -37,9 +37,6 @@ /* platform dependent support */ EXPORT_SYMBOL(__ioremap); -EXPORT_SYMBOL(strcmp); -EXPORT_SYMBOL(strncmp); -EXPORT_SYMBOL(dump_thread); EXPORT_SYMBOL(ip_fast_csum); @@ -51,6 +48,7 @@ EXPORT_SYMBOL(__down_trylock); EXPORT_SYMBOL(__down_interruptible); EXPORT_SYMBOL(is_in_rom); +EXPORT_SYMBOL(bfin_return_from_exception); /* Networking helper routines. */ EXPORT_SYMBOL(csum_partial_copy); @@ -60,13 +58,11 @@ EXPORT_SYMBOL(csum_partial_copy); * their interface isn't gonna change any time soon now, so * it's OK to leave it out of version control. */ -EXPORT_SYMBOL(strcpy); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcmp); EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(memchr); -EXPORT_SYMBOL(get_wchan); /* * libgcc functions - functions that are used internally by the @@ -102,6 +98,7 @@ EXPORT_SYMBOL(outsw); EXPORT_SYMBOL(insw); EXPORT_SYMBOL(outsl); EXPORT_SYMBOL(insl); +EXPORT_SYMBOL(insl_16); EXPORT_SYMBOL(irq_flags); EXPORT_SYMBOL(iounmap); EXPORT_SYMBOL(blackfin_dcache_invalidate_range); diff --git a/arch/blackfin/kernel/cplbinit.c b/arch/blackfin/kernel/cplbinit.c index f2db6a5e2b5..6320bc45fbb 100644 --- a/arch/blackfin/kernel/cplbinit.c +++ b/arch/blackfin/kernel/cplbinit.c @@ -26,29 +26,22 @@ #include <asm/cplb.h> #include <asm/cplbinit.h> -u_long icplb_table[MAX_CPLBS+1]; -u_long dcplb_table[MAX_CPLBS+1]; +u_long icplb_table[MAX_CPLBS + 1]; +u_long dcplb_table[MAX_CPLBS + 1]; #ifdef CONFIG_CPLB_SWITCH_TAB_L1 -u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data)); -u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data)); - -#ifdef CONFIG_CPLB_INFO -u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data)); -u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data)); -#endif /* CONFIG_CPLB_INFO */ - +# define PDT_ATTR __attribute__((l1_data)) #else +# define PDT_ATTR +#endif -u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]; -u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]; +u_long ipdt_table[MAX_SWITCH_I_CPLBS + 1] PDT_ATTR; +u_long dpdt_table[MAX_SWITCH_D_CPLBS + 1] PDT_ATTR; #ifdef CONFIG_CPLB_INFO -u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]; -u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]; -#endif /* CONFIG_CPLB_INFO */ - -#endif /*CONFIG_CPLB_SWITCH_TAB_L1*/ +u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS] PDT_ATTR; +u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS] PDT_ATTR; +#endif struct s_cplb { struct cplb_tab init_i; @@ -71,7 +64,7 @@ static struct cplb_desc cplb_data[] = { #else .valid = 0, #endif - .name = "ZERO Pointer Saveguard", + .name = "Zero Pointer Guard Page", }, { .start = L1_CODE_START, @@ -102,20 +95,20 @@ static struct cplb_desc cplb_data[] = { .end = 0, /* dynamic */ .psize = 0, .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, - .i_conf = SDRAM_IGENERIC, - .d_conf = SDRAM_DGENERIC, + .i_conf = SDRAM_IGENERIC, + .d_conf = SDRAM_DGENERIC, .valid = 1, - .name = "SDRAM Kernel", + .name = "Kernel Memory", }, { .start = 0, /* dynamic */ .end = 0, /* dynamic */ .psize = 0, .attr = INITIAL_T | SWITCH_T | D_CPLB, - .i_conf = SDRAM_IGENERIC, - .d_conf = SDRAM_DNON_CHBL, + .i_conf = SDRAM_IGENERIC, + .d_conf = SDRAM_DNON_CHBL, .valid = 1, - .name = "SDRAM RAM MTD", + .name = "uClinux MTD Memory", }, { .start = 0, /* dynamic */ @@ -124,7 +117,7 @@ static struct cplb_desc cplb_data[] = { .attr = INITIAL_T | SWITCH_T | D_CPLB, .d_conf = SDRAM_DNON_CHBL, .valid = 1, - .name = "SDRAM Uncached DMA ZONE", + .name = "Uncached DMA Zone", }, { .start = 0, /* dynamic */ @@ -134,7 +127,7 @@ static struct cplb_desc cplb_data[] = { .i_conf = 0, /* dynamic */ .d_conf = 0, /* dynamic */ .valid = 1, - .name = "SDRAM Reserved Memory", + .name = "Reserved Memory", }, { .start = ASYNC_BANK0_BASE, @@ -143,14 +136,14 @@ static struct cplb_desc cplb_data[] = { .attr = SWITCH_T | D_CPLB, .d_conf = SDRAM_EBIU, .valid = 1, - .name = "ASYNC Memory", + .name = "Asynchronous Memory Banks", }, { -#if defined(CONFIG_BF561) - .start = L2_SRAM, - .end = L2_SRAM_END, +#ifdef L2_START + .start = L2_START, + .end = L2_START + L2_LENGTH, .psize = SIZE_1M, - .attr = SWITCH_T | D_CPLB, + .attr = SWITCH_T | I_CPLB | D_CPLB, .i_conf = L2_MEMORY, .d_conf = L2_MEMORY, .valid = 1, @@ -158,13 +151,23 @@ static struct cplb_desc cplb_data[] = { .valid = 0, #endif .name = "L2 Memory", - } + }, + { + .start = BOOT_ROM_START, + .end = BOOT_ROM_START + BOOT_ROM_LENGTH, + .psize = SIZE_1M, + .attr = SWITCH_T | I_CPLB | D_CPLB, + .i_conf = SDRAM_IGENERIC, + .d_conf = SDRAM_DGENERIC, + .valid = 1, + .name = "On-Chip BootROM", + }, }; static u16 __init lock_kernel_check(u32 start, u32 end) { - if ((start <= (u32) _stext && end >= (u32) _end) - || (start >= (u32) _stext && end <= (u32) _end)) + if ((end <= (u32) _end && end >= (u32)_stext) || + (start <= (u32) _end && start >= (u32)_stext)) return IN_KERNEL; return 0; } @@ -350,7 +353,7 @@ void __init generate_cpl_tables(void) else cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL; - for (i = ZERO_P; i <= L2_MEM; i++) { + for (i = ZERO_P; i < ARRAY_SIZE(cplb_data); ++i) { if (!cplb_data[i].valid) continue; diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c index 6ec518a8111..724f4a5a1d4 100644 --- a/arch/blackfin/kernel/early_printk.c +++ b/arch/blackfin/kernel/early_printk.c @@ -205,7 +205,8 @@ asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr) if (likely(early_console == NULL)) setup_early_printk(DEFAULT_EARLY_PORT); - dump_bfin_regs(fp, retaddr); + dump_bfin_mem((void *)fp->retx); + show_regs(fp); dump_bfin_trace_buffer(); panic("Died early"); diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 9124467651c..5bf15125f0d 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -134,27 +134,6 @@ void cpu_idle(void) } } -void show_regs(struct pt_regs *regs) -{ - printk(KERN_NOTICE "\n"); - printk(KERN_NOTICE - "PC: %08lu Status: %04lu SysStatus: %04lu RETS: %08lu\n", - regs->pc, regs->astat, regs->seqstat, regs->rets); - printk(KERN_NOTICE - "A0.x: %08lx A0.w: %08lx A1.x: %08lx A1.w: %08lx\n", - regs->a0x, regs->a0w, regs->a1x, regs->a1w); - printk(KERN_NOTICE "P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", - regs->p0, regs->p1, regs->p2, regs->p3); - printk(KERN_NOTICE "P4: %08lx P5: %08lx\n", regs->p4, regs->p5); - printk(KERN_NOTICE "R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", - regs->r0, regs->r1, regs->r2, regs->r3); - printk(KERN_NOTICE "R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", - regs->r4, regs->r5, regs->r6, regs->r7); - - if (!regs->ipend) - printk(KERN_NOTICE "USP: %08lx\n", rdusp()); -} - /* Fill in the fpu structure for a core dump. */ int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpregs) @@ -239,51 +218,6 @@ copy_thread(int nr, unsigned long clone_flags, } /* - * fill in the user structure for a core dump.. - */ -void dump_thread(struct pt_regs *regs, struct user *dump) -{ - dump->magic = CMAGIC; - dump->start_code = 0; - dump->start_stack = rdusp() & ~(PAGE_SIZE - 1); - dump->u_tsize = ((unsigned long)current->mm->end_code) >> PAGE_SHIFT; - dump->u_dsize = ((unsigned long)(current->mm->brk + - (PAGE_SIZE - 1))) >> PAGE_SHIFT; - dump->u_dsize -= dump->u_tsize; - dump->u_ssize = 0; - - if (dump->start_stack < TASK_SIZE) - dump->u_ssize = - ((unsigned long)(TASK_SIZE - - dump->start_stack)) >> PAGE_SHIFT; - - dump->u_ar0 = (struct user_regs_struct *)((int)&dump->regs - (int)dump); - - dump->regs.r0 = regs->r0; - dump->regs.r1 = regs->r1; - dump->regs.r2 = regs->r2; - dump->regs.r3 = regs->r3; - dump->regs.r4 = regs->r4; - dump->regs.r5 = regs->r5; - dump->regs.r6 = regs->r6; - dump->regs.r7 = regs->r7; - dump->regs.p0 = regs->p0; - dump->regs.p1 = regs->p1; - dump->regs.p2 = regs->p2; - dump->regs.p3 = regs->p3; - dump->regs.p4 = regs->p4; - dump->regs.p5 = regs->p5; - dump->regs.orig_p0 = regs->orig_p0; - dump->regs.a0w = regs->a0w; - dump->regs.a1w = regs->a1w; - dump->regs.a0x = regs->a0x; - dump->regs.a1x = regs->a1x; - dump->regs.rets = regs->rets; - dump->regs.astat = regs->astat; - dump->regs.pc = regs->pc; -} - -/* * sys_execve() executes a new program. */ diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 934234f4383..d2822010b7c 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -43,6 +43,7 @@ #include <asm/cacheflush.h> #include <asm/blackfin.h> #include <asm/cplbinit.h> +#include <asm/div64.h> #include <asm/fixed_code.h> #include <asm/early_printk.h> @@ -504,13 +505,17 @@ EXPORT_SYMBOL(get_sclk); unsigned long sclk_to_usecs(unsigned long sclk) { - return (USEC_PER_SEC * (u64)sclk) / get_sclk(); + u64 tmp = USEC_PER_SEC * (u64)sclk; + do_div(tmp, get_sclk()); + return tmp; } EXPORT_SYMBOL(sclk_to_usecs); unsigned long usecs_to_sclk(unsigned long usecs) { - return (get_sclk() * (u64)usecs) / USEC_PER_SEC; + u64 tmp = get_sclk() * (u64)usecs; + do_div(tmp, USEC_PER_SEC); + return tmp; } EXPORT_SYMBOL(usecs_to_sclk); diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index cfa05436c97..21a55ef19cb 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -158,7 +158,7 @@ static void decode_address(char *buf, unsigned long address) } /* we were unable to find this address anywhere */ - sprintf(buf, "[<0x%p>]", (void *)address); + sprintf(buf, "<0x%p> /* unknown address */", (void *)address); done: write_unlock_irqrestore(&tasklist_lock, flags); @@ -169,7 +169,9 @@ asmlinkage void double_fault_c(struct pt_regs *fp) console_verbose(); oops_in_progress = 1; printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n"); - dump_bfin_regs(fp, (void *)fp->retx); + dump_bfin_process(fp); + dump_bfin_mem((void *)fp->retx); + show_regs(fp); panic("Double Fault - unrecoverable event\n"); } @@ -250,7 +252,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_EXCPT03: info.si_code = SEGV_STACKFLOW; sig = SIGSEGV; - printk(KERN_NOTICE EXC_0x03); + printk(KERN_NOTICE EXC_0x03(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x04 - User Defined, Caught by default */ @@ -279,7 +281,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_OVFLOW: info.si_code = TRAP_TRACEFLOW; sig = SIGTRAP; - printk(KERN_NOTICE EXC_0x11); + printk(KERN_NOTICE EXC_0x11(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x12 - Reserved, Caught by default */ @@ -301,36 +303,35 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_UNDEF_I: info.si_code = ILL_ILLOPC; sig = SIGILL; - printk(KERN_NOTICE EXC_0x21); + printk(KERN_NOTICE EXC_0x21(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x22 - Illegal Instruction Combination, handled here */ case VEC_ILGAL_I: info.si_code = ILL_ILLPARAOP; sig = SIGILL; - printk(KERN_NOTICE EXC_0x22); + printk(KERN_NOTICE EXC_0x22(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; - /* 0x23 - Data CPLB Protection Violation, - normal case is handled in _cplb_hdr */ + /* 0x23 - Data CPLB protection violation, handled here */ case VEC_CPLB_VL: info.si_code = ILL_CPLB_VI; - sig = SIGILL; - printk(KERN_NOTICE EXC_0x23); + sig = SIGBUS; + printk(KERN_NOTICE EXC_0x23(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x24 - Data access misaligned, handled here */ case VEC_MISALI_D: info.si_code = BUS_ADRALN; sig = SIGBUS; - printk(KERN_NOTICE EXC_0x24); + printk(KERN_NOTICE EXC_0x24(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x25 - Unrecoverable Event, handled here */ case VEC_UNCOV: info.si_code = ILL_ILLEXCPT; sig = SIGILL; - printk(KERN_NOTICE EXC_0x25); + printk(KERN_NOTICE EXC_0x25(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr, @@ -338,7 +339,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_CPLB_M: info.si_code = BUS_ADRALN; sig = SIGBUS; - printk(KERN_NOTICE EXC_0x26); + printk(KERN_NOTICE EXC_0x26(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */ @@ -349,7 +350,7 @@ asmlinkage void trap_c(struct pt_regs *fp) printk(KERN_NOTICE "NULL pointer access (probably)\n"); #else sig = SIGILL; - printk(KERN_NOTICE EXC_0x27); + printk(KERN_NOTICE EXC_0x27(KERN_NOTICE)); #endif CHK_DEBUGGER_TRAP(); break; @@ -357,7 +358,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_WATCH: info.si_code = TRAP_WATCHPT; sig = SIGTRAP; - pr_debug(EXC_0x28); + pr_debug(EXC_0x28(KERN_DEBUG)); CHK_DEBUGGER_TRAP_MAYBE(); /* Check if this is a watchpoint in kernel space */ if (fp->ipend & 0xffc0) @@ -379,22 +380,21 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_MISALI_I: info.si_code = BUS_ADRALN; sig = SIGBUS; - printk(KERN_NOTICE EXC_0x2A); + printk(KERN_NOTICE EXC_0x2A(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; - /* 0x2B - Instruction CPLB protection Violation, - handled in _cplb_hdr */ + /* 0x2B - Instruction CPLB protection violation, handled here */ case VEC_CPLB_I_VL: info.si_code = ILL_CPLB_VI; - sig = SIGILL; - printk(KERN_NOTICE EXC_0x2B); + sig = SIGBUS; + printk(KERN_NOTICE EXC_0x2B(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */ case VEC_CPLB_I_M: info.si_code = ILL_CPLB_MISS; sig = SIGBUS; - printk(KERN_NOTICE EXC_0x2C); + printk(KERN_NOTICE EXC_0x2C(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x2D - Instruction CPLB Multiple Hits, handled here */ @@ -405,7 +405,7 @@ asmlinkage void trap_c(struct pt_regs *fp) printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n"); #else sig = SIGILL; - printk(KERN_NOTICE EXC_0x2D); + printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE)); #endif CHK_DEBUGGER_TRAP(); break; @@ -413,7 +413,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_ILL_RES: info.si_code = ILL_PRVOPC; sig = SIGILL; - printk(KERN_NOTICE EXC_0x2E); + printk(KERN_NOTICE EXC_0x2E(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x2F - Reserved, Caught by default */ @@ -446,7 +446,9 @@ asmlinkage void trap_c(struct pt_regs *fp) if (sig != SIGTRAP) { unsigned long stack; - dump_bfin_regs(fp, (void *)fp->retx); + dump_bfin_process(fp); + dump_bfin_mem((void *)fp->retx); + show_regs(fp); /* Print out the trace buffer if it makes sense */ #ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE @@ -460,22 +462,25 @@ asmlinkage void trap_c(struct pt_regs *fp) show_stack(current, &stack); if (oops_in_progress) { #ifndef CONFIG_ACCESS_CHECK - printk(KERN_EMERG "Hey - dork - please turn on " - "CONFIG_ACCESS_CHECK\n"); + printk(KERN_EMERG "Please turn on " + "CONFIG_ACCESS_CHECK\n"); #endif panic("Kernel exception"); } - - /* Ensure that bad return addresses don't end up in an infinite - * loop, due to speculative loads/reads - */ - fp->pc = SAFE_USER_INSTRUCTION; } + info.si_signo = sig; info.si_errno = 0; info.si_addr = (void *)fp->pc; force_sig_info(sig, &info, current); + /* Ensure that bad return addresses don't end up in an infinite + * loop, due to speculative loads/reads. This needs to be done after + * the signal has been sent. + */ + if (trapnr == VEC_CPLB_I_M && sig != SIGTRAP) + fp->pc = SAFE_USER_INSTRUCTION; + trace_buffer_restore(j); return; } @@ -600,37 +605,48 @@ void dump_stack(void) show_stack(current, &stack); trace_buffer_restore(tflags); } - EXPORT_SYMBOL(dump_stack); -void dump_bfin_regs(struct pt_regs *fp, void *retaddr) +void dump_bfin_process(struct pt_regs *fp) { - char buf [150]; + /* We should be able to look at fp->ipend, but we don't push it on the + * stack all the time, so do this until we fix that */ + unsigned int context = bfin_read_IPEND(); + + if (oops_in_progress) + printk(KERN_EMERG "Kernel OOPS in progress\n"); + + if (context & 0x0020) + printk(KERN_NOTICE "Deferred excecption or HW Error context\n"); + else if (context & 0x3FC0) + printk(KERN_NOTICE "Interrupt context\n"); + else if (context & 0x4000) + printk(KERN_NOTICE "Deferred Interrupt context\n"); + else if (context & 0x8000) + printk(KERN_NOTICE "Kernel process context\n"); + + if (current->pid && current->mm) { + printk(KERN_NOTICE "CURRENT PROCESS:\n"); + printk(KERN_NOTICE "COMM=%s PID=%d\n", + current->comm, current->pid); + + printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" + KERN_NOTICE "BSS = 0x%p-0x%p USER-STACK = 0x%p\n" + KERN_NOTICE "\n", + (void *)current->mm->start_code, + (void *)current->mm->end_code, + (void *)current->mm->start_data, + (void *)current->mm->end_data, + (void *)current->mm->end_data, + (void *)current->mm->brk, + (void *)current->mm->start_stack); + } else + printk(KERN_NOTICE "\n" KERN_NOTICE + "No Valid process in current context\n"); +} - if (!oops_in_progress) { - if (current->pid && current->mm) { - printk(KERN_NOTICE "\n" KERN_NOTICE "CURRENT PROCESS:\n"); - printk(KERN_NOTICE "COMM=%s PID=%d\n", - current->comm, current->pid); - - printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" - KERN_NOTICE "BSS = 0x%p-0x%p USER-STACK = 0x%p\n" - KERN_NOTICE "\n", - (void *)current->mm->start_code, - (void *)current->mm->end_code, - (void *)current->mm->start_data, - (void *)current->mm->end_data, - (void *)current->mm->end_data, - (void *)current->mm->brk, - (void *)current->mm->start_stack); - } else { - printk (KERN_NOTICE "\n" KERN_NOTICE - "No Valid pid - Either things are really messed up," - " or you are in the kernel\n"); - } - } else { - printk(KERN_NOTICE "Kernel or interrupt exception\n"); - } +void dump_bfin_mem(void *retaddr) +{ if (retaddr >= (void *)FIXED_CODE_START && retaddr < (void *)physical_mem_end #if L1_CODE_LENGTH != 0 @@ -671,8 +687,13 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr) printk("\n"); } else printk("\n" KERN_NOTICE - "Cannot look at the [PC] for it is" - " in unreadable memory - sorry\n"); + "Cannot look at the [PC] <%p> for it is" + " in unreadable memory - sorry\n", retaddr); +} + +void show_regs(struct pt_regs *fp) +{ + char buf [150]; printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\n"); printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", @@ -686,6 +707,8 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr) printk(KERN_NOTICE " RETX: %s\n", buf); decode_address(buf, fp->rets); printk(KERN_NOTICE " RETS: %s\n", buf); + decode_address(buf, fp->pc); + printk(KERN_NOTICE " PC: %s\n", buf); if ((long)fp->seqstat & SEQSTAT_EXCAUSE) { decode_address(buf, bfin_read_DCPLB_FAULT_ADDR()); @@ -800,7 +823,9 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp) printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR()); printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR()); - dump_bfin_regs(fp, (void *)fp->retx); + dump_bfin_process(fp); + dump_bfin_mem((void *)fp->retx); + show_regs(fp); dump_stack(); panic("Unrecoverable event\n"); } diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile index bfdad52c570..635288fc5f5 100644 --- a/arch/blackfin/lib/Makefile +++ b/arch/blackfin/lib/Makefile @@ -4,7 +4,7 @@ lib-y := \ ashldi3.o ashrdi3.o lshrdi3.o \ - muldi3.o divsi3.o udivsi3.o udivdi3.o modsi3.o umodsi3.o \ + muldi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \ checksum.o memcpy.o memset.o memcmp.o memchr.o memmove.o \ strcmp.o strcpy.o strncmp.o strncpy.o \ umulsi3_highpart.o smulsi3_highpart.o \ diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S index a17cc77ac36..df7b8833a0c 100644 --- a/arch/blackfin/lib/ins.S +++ b/arch/blackfin/lib/ins.S @@ -77,3 +77,22 @@ ENTRY(_insb) sti R3; RTS; ENDPROC(_insb) + + + +ENTRY(_insl_16) + P0 = R0; /* P0 = port */ + cli R3; + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Llong16_loop_s, .Llong16_loop_e) LC0 = P2; +.Llong16_loop_s: R0 = [P0]; + W[P1++] = R0; + R0 = R0 >> 16; + W[P1++] = R0; + NOP; +.Llong16_loop_e: NOP; + sti R3; + RTS; +ENDPROC(_insl_16) diff --git a/arch/blackfin/lib/strcmp.c b/arch/blackfin/lib/strcmp.c index 4eeefd86907..fde39a1950c 100644 --- a/arch/blackfin/lib/strcmp.c +++ b/arch/blackfin/lib/strcmp.c @@ -1,10 +1,19 @@ -#include <linux/types.h> +/* + * Provide symbol in case str func is not inlined. + * + * Copyright (c) 2006-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #define strcmp __inline_strcmp #include <asm/string.h> #undef strcmp +#include <linux/module.h> + int strcmp(const char *dest, const char *src) { return __inline_strcmp(dest, src); } +EXPORT_SYMBOL(strcmp); diff --git a/arch/blackfin/lib/strcpy.c b/arch/blackfin/lib/strcpy.c index 534589db725..2a8836b1f4d 100644 --- a/arch/blackfin/lib/strcpy.c +++ b/arch/blackfin/lib/strcpy.c @@ -1,10 +1,19 @@ -#include <linux/types.h> +/* + * Provide symbol in case str func is not inlined. + * + * Copyright (c) 2006-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #define strcpy __inline_strcpy #include <asm/string.h> #undef strcpy +#include <linux/module.h> + char *strcpy(char *dest, const char *src) { return __inline_strcpy(dest, src); } +EXPORT_SYMBOL(strcpy); diff --git a/arch/blackfin/lib/strncmp.c b/arch/blackfin/lib/strncmp.c index d791f120bff..2aaae78a68e 100644 --- a/arch/blackfin/lib/strncmp.c +++ b/arch/blackfin/lib/strncmp.c @@ -1,10 +1,19 @@ -#include <linux/types.h> +/* + * Provide symbol in case str func is not inlined. + * + * Copyright (c) 2006-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #define strncmp __inline_strncmp #include <asm/string.h> #undef strncmp +#include <linux/module.h> + int strncmp(const char *cs, const char *ct, size_t count) { return __inline_strncmp(cs, ct, count); } +EXPORT_SYMBOL(strncmp); diff --git a/arch/blackfin/lib/strncpy.c b/arch/blackfin/lib/strncpy.c index 1fecb5c71ff..ea1dc6bf237 100644 --- a/arch/blackfin/lib/strncpy.c +++ b/arch/blackfin/lib/strncpy.c @@ -1,10 +1,19 @@ -#include <linux/types.h> +/* + * Provide symbol in case str func is not inlined. + * + * Copyright (c) 2006-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ #define strncpy __inline_strncpy #include <asm/string.h> #undef strncpy +#include <linux/module.h> + char *strncpy(char *dest, const char *src, size_t n) { return __inline_strncpy(dest, src, n); } +EXPORT_SYMBOL(strncpy); diff --git a/arch/blackfin/lib/udivdi3.S b/arch/blackfin/lib/udivdi3.S deleted file mode 100644 index ad1ebee675e..00000000000 --- a/arch/blackfin/lib/udivdi3.S +++ /dev/null @@ -1,375 +0,0 @@ -/* - * udivdi3.S - unsigned long long division - * - * Copyright 2003-2007 Analog Devices Inc. - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPLv2 or later. - */ - -#include <linux/linkage.h> - -#define CARRY AC0 - -#ifdef CONFIG_ARITHMETIC_OPS_L1 -.section .l1.text -#else -.text -#endif - - -ENTRY(___udivdi3) - R3 = [SP + 12]; - [--SP] = (R7:4, P5:3); - - /* Attempt to use divide primitive first; these will handle - ** most cases, and they're quick - avoids stalls incurred by - ** testing for identities. - */ - - R4 = R2 | R3; - CC = R4 == 0; - IF CC JUMP .LDIV_BY_ZERO; - - R4.H = 0x8000; - R4 >>>= 16; // R4 now 0xFFFF8000 - R5 = R0 | R2; // If either dividend or - R4 = R5 & R4; // divisor have bits in - CC = R4; // top half or low half's sign - IF CC JUMP .LIDENTS; // bit, skip builtins. - R4 = R1 | R3; // Also check top halves - CC = R4; - IF CC JUMP .LIDENTS; - - /* Can use the builtins. */ - - AQ = CC; // Clear AQ (CC==0) - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - DIVQ(R0, R2); - R0 = R0.L (Z); - R1 = 0; - (R7:4, P5:3) = [SP++]; - RTS; - -.LIDENTS: - /* Test for common identities. Value to be returned is - ** placed in R6,R7. - */ - // Check for 0/y, return 0 - R4 = R0 | R1; - CC = R4 == 0; - IF CC JUMP .LRETURN_R0; - - // Check for x/x, return 1 - R6 = R0 - R2; // If x == y, then both R6 and R7 will be zero - R7 = R1 - R3; - R4 = R6 | R7; // making R4 zero. - R6 += 1; // which would now make R6:R7==1. - CC = R4 == 0; - IF CC JUMP .LRETURN_IDENT; - - // Check for x/1, return x - R6 = R0; - R7 = R1; - CC = R3 == 0; - IF !CC JUMP .Lnexttest; - CC = R2 == 1; - IF CC JUMP .LRETURN_IDENT; - -.Lnexttest: - R4.L = ONES R2; // check for div by power of two which - R5.L = ONES R3; // can be done using a shift - R6 = PACK (R5.L, R4.L); - CC = R6 == 1; - IF CC JUMP .Lpower_of_two_upper_zero; - R6 = PACK (R4.L, R5.L); - CC = R6 == 1; - IF CC JUMP .Lpower_of_two_lower_zero; - - // Check for x < y, return 0 - R6 = 0; - R7 = R6; - CC = R1 < R3 (IU); - IF CC JUMP .LRETURN_IDENT; - CC = R1 == R3; - IF !CC JUMP .Lno_idents; - CC = R0 < R2 (IU); - IF CC JUMP .LRETURN_IDENT; - -.Lno_idents: // Idents don't match. Go for the full operation - - - // If X, or X and Y have high bit set, it'll affect the - // results, so shift right one to stop this. Note: we've already - // checked that X >= Y, so Y's msb won't be set unless X's - // is. - - R4 = 0; - CC = R1 < 0; - IF !CC JUMP .Lx_msb_clear; - CC = !CC; // 1 -> 0; - R1 = ROT R1 BY -1; // Shift X >> 1 - R0 = ROT R0 BY -1; // lsb -> CC - BITSET(R4,31); // to record only x msb was set - CC = R3 < 0; - IF !CC JUMP .Ly_msb_clear; - CC = !CC; - R3 = ROT R3 BY -1; // Shift Y >> 1 - R2 = ROT R2 BY -1; - BITCLR(R4,31); // clear bit to record only x msb was set - -.Ly_msb_clear: -.Lx_msb_clear: - // Bit 31 in R4 indicates X msb set, but Y msb wasn't, and no bits - // were lost, so we should shift result left by one. - - [--SP] = R4; // save for later - - // In the loop that follows, each iteration we add - // either Y' or -Y' to the Remainder. We compute the - // negated Y', and store, for convenience. Y' goes - // into P0:P1, while -Y' goes into P2:P3. - - P0 = R2; - P1 = R3; - R2 = -R2; - CC = CARRY; - CC = !CC; - R4 = CC; - R3 = -R3; - R3 = R3 - R4; - - R6 = 0; // remainder = 0 - R7 = R6; - - [--SP] = R2; P2 = SP; - [--SP] = R3; P3 = SP; - [--SP] = R6; P5 = SP; // AQ = 0 - [--SP] = P1; - - /* In the loop that follows, we use the following - ** register assignments: - ** R0,R1 X, workspace - ** R2,R3 Y, workspace - ** R4,R5 partial Div - ** R6,R7 partial remainder - ** P5 AQ - ** The remainder and div form a 128-bit number, with - ** the remainder in the high 64-bits. - */ - R4 = R0; // Div = X' - R5 = R1; - R3 = 0; - - P4 = 64; // Iterate once per bit - LSETUP(.LULST,.LULEND) LC0 = P4; -.LULST: - /* Shift Div and remainder up by one. The bit shifted - ** out of the top of the quotient is shifted into the bottom - ** of the remainder. - */ - CC = R3; - R4 = ROT R4 BY 1; - R5 = ROT R5 BY 1 || // low q to high q - R2 = [P5]; // load saved AQ - R6 = ROT R6 BY 1 || // high q to low r - R0 = [P2]; // load -Y' - R7 = ROT R7 BY 1 || // low r to high r - R1 = [P3]; - - // Assume add -Y' - CC = R2 < 0; // But if AQ is set... - IF CC R0 = P0; // then add Y' instead - IF CC R1 = P1; - - R6 = R6 + R0; // Rem += (Y' or -Y') - CC = CARRY; - R0 = CC; - R7 = R7 + R1; - R7 = R7 + R0 (NS) || - R1 = [SP]; - // Set the next AQ bit - R1 = R7 ^ R1; // from Remainder and Y' - R1 = R1 >> 31 || // Negate AQ's value, and - [P5] = R1; // save next AQ - BITTGL(R1, 0); // add neg AQ to the Div -.LULEND: R4 = R4 + R1; - - R6 = [SP + 16]; - - R0 = R4; - R1 = R5; - CC = BITTST(R6,30); // Just set CC=0 - R4 = ROT R0 BY 1; // but if we had to shift X, - R5 = ROT R1 BY 1; // and didn't shift any bits out, - CC = BITTST(R6,31); // then the result will be half as - IF CC R0 = R4; // much as required, so shift left - IF CC R1 = R5; // one space. - - SP += 20; - (R7:4, P5:3) = [SP++]; - RTS; - -.Lpower_of_two: - /* Y has a single bit set, which means it's a power of two. - ** That means we can perform the division just by shifting - ** X to the right the appropriate number of bits - */ - - /* signbits returns the number of sign bits, minus one. - ** 1=>30, 2=>29, ..., 0x40000000=>0. Which means we need - ** to shift right n-signbits spaces. It also means 0x80000000 - ** is a special case, because that *also* gives a signbits of 0 - */ -.Lpower_of_two_lower_zero: - R7 = 0; - R6 = R1 >> 31; - CC = R3 < 0; - IF CC JUMP .LRETURN_IDENT; - - R2.L = SIGNBITS R3; - R2 = R2.L (Z); - R2 += -62; - (R7:4, P5:3) = [SP++]; - JUMP ___lshftli; - -.Lpower_of_two_upper_zero: - CC = R2 < 0; - IF CC JUMP .Lmaxint_shift; - - R2.L = SIGNBITS R2; - R2 = R2.L (Z); - R2 += -30; - (R7:4, P5:3) = [SP++]; - JUMP ___lshftli; - -.Lmaxint_shift: - R2 = -31; - (R7:4, P5:3) = [SP++]; - JUMP ___lshftli; - -.LRETURN_IDENT: - R0 = R6; - R1 = R7; -.LRETURN_R0: - (R7:4, P5:3) = [SP++]; - RTS; -.LDIV_BY_ZERO: - R0 = ~R2; - R1 = R0; - (R7:4, P5:3) = [SP++]; - RTS; - -ENDPROC(___udivdi3) - - -ENTRY(___lshftli) - CC = R2 == 0; - IF CC JUMP .Lfinished; // nothing to do - CC = R2 < 0; - IF CC JUMP .Lrshift; - R3 = 64; - CC = R2 < R3; - IF !CC JUMP .Lretzero; - - // We're shifting left, and it's less than 64 bits, so - // a valid result will be returned. - - R3 >>= 1; // R3 now 32 - CC = R2 < R3; - - IF !CC JUMP .Lzerohalf; - - // We're shifting left, between 1 and 31 bits, which means - // some of the low half will be shifted into the high half. - // Work out how much. - - R3 = R3 - R2; - - // Save that much data from the bottom half. - - P1 = R7; - R7 = R0; - R7 >>= R3; - - // Adjust both parts of the parameter. - - R0 <<= R2; - R1 <<= R2; - - // And include the bits moved across. - - R1 = R1 | R7; - R7 = P1; - RTS; - -.Lzerohalf: - // We're shifting left, between 32 and 63 bits, so the - // bottom half will become zero, and the top half will - // lose some bits. How many? - - R2 = R2 - R3; // N - 32 - R1 = LSHIFT R0 BY R2.L; - R0 = R0 - R0; - RTS; - -.Lretzero: - R0 = R0 - R0; - R1 = R0; -.Lfinished: - RTS; - -.Lrshift: - // We're shifting right, but by how much? - R2 = -R2; - R3 = 64; - CC = R2 < R3; - IF !CC JUMP .Lretzero; - - // Shifting right less than 64 bits, so some result bits will - // be retained. - - R3 >>= 1; // R3 now 32 - CC = R2 < R3; - IF !CC JUMP .Lsignhalf; - - // Shifting right between 1 and 31 bits, so need to copy - // data across words. - - P1 = R7; - R3 = R3 - R2; - R7 = R1; - R7 <<= R3; - R1 >>= R2; - R0 >>= R2; - R0 = R7 | R0; - R7 = P1; - RTS; - -.Lsignhalf: - // Shifting right between 32 and 63 bits, so the top half - // will become all zero-bits, and the bottom half is some - // of the top half. But how much? - - R2 = R2 - R3; - R0 = R1; - R0 >>= R2; - R1 = 0; - RTS; - -ENDPROC(___lshftli) diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig index 50321f723de..5c736837d4b 100644 --- a/arch/blackfin/mach-bf527/Kconfig +++ b/arch/blackfin/mach-bf527/Kconfig @@ -1,5 +1,7 @@ if (BF52x) +source "arch/blackfin/mach-bf527/boards/Kconfig" + menu "BF527 Specific Configuration" comment "Alternative Multiplexing Scheme" diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig new file mode 100644 index 00000000000..6a570ad0374 --- /dev/null +++ b/arch/blackfin/mach-bf527/boards/Kconfig @@ -0,0 +1,12 @@ +choice + prompt "System type" + default BFIN527_EZKIT + help + Select your board! + +config BFIN527_EZKIT + bool "BF527-EZKIT" + help + BF527-EZKIT-LITE board support. + +endchoice diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile index 912ac8ebc88..7277d35ef11 100644 --- a/arch/blackfin/mach-bf527/boards/Makefile +++ b/arch/blackfin/mach-bf527/boards/Makefile @@ -1,7 +1,5 @@ # -# arch/blackfin/mach-bf532/boards/Makefile +# arch/blackfin/mach-bf527/boards/Makefile # -obj-y += eth_mac.o -obj-$(CONFIG_BFIN527_EZKIT) += ezkit.o - +obj-$(CONFIG_BFIN527_EZKIT) += ezkit.o diff --git a/arch/blackfin/mach-bf527/boards/eth_mac.c b/arch/blackfin/mach-bf527/boards/eth_mac.c deleted file mode 100644 index a725cc8a929..00000000000 --- a/arch/blackfin/mach-bf527/boards/eth_mac.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/blackfin/mach-bf537/board/eth_mac.c - * - * Copyright (C) 2007 Analog Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/module.h> -#include <asm/blackfin.h> - -#if defined(CONFIG_GENERIC_BOARD) || defined(CONFIG_BFIN537_STAMP) - -/* - * Currently the MAC address is saved in Flash by U-Boot - */ -#define FLASH_MAC 0x203f0000 - -void get_bf537_ether_addr(char *addr) -{ - unsigned int flash_mac = (unsigned int) FLASH_MAC; - *(u32 *)(&(addr[0])) = bfin_read32(flash_mac); - flash_mac += 4; - *(u16 *)(&(addr[4])) = bfin_read16(flash_mac); -} - -#else - -/* - * Provide MAC address function for other specific board setting - */ -void get_bf537_ether_addr(char *addr) -{ - printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n", __FILE__); -} - -#endif - -EXPORT_SYMBOL(get_bf537_ether_addr); diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index bf1bedcc886..003e2ac654d 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -35,17 +35,18 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb_isp1362.h> +#include <linux/usb/isp1362.h> #endif #include <linux/pata_platform.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/usb_sl811.h> +#include <linux/usb/sl811.h> #include <asm/cplb.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> #include <asm/nand.h> +#include <asm/portmux.h> #include <linux/spi/ad7877.h> /* @@ -450,6 +451,13 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif +#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ + && defined(CONFIG_SND_SOC_WM8731_SPI) +static struct bfin5xx_spi_chip spi_wm8731_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -551,17 +559,29 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .platform_data = &bfin_ad7877_ts_info, .irq = IRQ_PF6, .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &spi_ad7877_chip_info, }, #endif +#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ + && defined(CONFIG_SND_SOC_WM8731_SPI) + { + .modalias = "wm8731", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, + .controller_data = &spi_wm8731_chip_info, + .mode = SPI_MODE_0, + }, +#endif }; /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; /* SPI (0) */ @@ -788,3 +808,14 @@ void native_machine_restart(char *cmd) if ((bfin_read_SYSCR() & 0x7) == 0x3) bfin_gpio_reset_spi0_ssel1(); } + +/* + * Currently the MAC address is saved in Flash by U-Boot + */ +#define FLASH_MAC 0x203f0000 +void bfin_get_ether_addr(char *addr) +{ + *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC); + *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4); +} +EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf533/Kconfig b/arch/blackfin/mach-bf533/Kconfig index 14297b3ed5c..76beb75f12d 100644 --- a/arch/blackfin/mach-bf533/Kconfig +++ b/arch/blackfin/mach-bf533/Kconfig @@ -1,5 +1,7 @@ if (BF533 || BF532 || BF531) +source "arch/blackfin/mach-bf533/boards/Kconfig" + menu "BF533/2/1 Specific Configuration" comment "Interrupt Priority Assignment" diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index b941550f956..6bcf4047f89 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -36,20 +36,21 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb_isp1362.h> +#include <linux/usb/isp1362.h> #endif #include <linux/pata_platform.h> #include <linux/irq.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> +#include <asm/portmux.h> /* * Name the Board for the /proc/cpuinfo */ const char bfin_board_name[] = "HV Sistemas H8606"; -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_BFIN_MODULE) +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -93,10 +94,6 @@ static struct resource smc91x_resources[] = { .end = IRQ_PROG_INTB, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, { - /* - * denotes the flag pin and is used directly if - * CONFIG_IRQCHIP_DEMUX_GPIO is defined. - */ .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -269,6 +266,7 @@ static struct resource bfin_spi0_resource[] = { static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bfin_spi0_device = { @@ -342,4 +340,4 @@ static int __init H8606_init(void) return 0; } -arch_initcall(H8606_init);
\ No newline at end of file +arch_initcall(H8606_init); diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig new file mode 100644 index 00000000000..751de5110af --- /dev/null +++ b/arch/blackfin/mach-bf533/boards/Kconfig @@ -0,0 +1,34 @@ +choice + prompt "System type" + default BFIN533_STAMP + help + Select your board! + +config BFIN533_EZKIT + bool "BF533-EZKIT" + help + BF533-EZKIT-LITE board support. + +config BFIN533_STAMP + bool "BF533-STAMP" + help + BF533-STAMP board support. + +config BFIN533_BLUETECHNIX_CM + bool "Bluetechnix CM-BF533" + depends on (BF533) + help + CM-BF533 support for EVAL- and DEV-Board. + +config H8606_HVSISTEMAS + bool "HV Sistemas H8606" + depends on (BF532) + help + HV Sistemas H8606 board support. + +config GENERIC_BF533_BOARD + bool "Generic" + help + Generic or Custom board support. + +endchoice diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile index 2452b456ccb..54f57fb9791 100644 --- a/arch/blackfin/mach-bf533/boards/Makefile +++ b/arch/blackfin/mach-bf533/boards/Makefile @@ -2,7 +2,7 @@ # arch/blackfin/mach-bf533/boards/Makefile # -obj-$(CONFIG_GENERIC_BOARD) += generic_board.o +obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o obj-$(CONFIG_BFIN533_STAMP) += stamp.o obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index a863522a446..21df2f37549 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -33,11 +33,12 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#include <linux/usb_isp1362.h> +#include <linux/usb/isp1362.h> #include <linux/pata_platform.h> #include <linux/irq.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> /* * Name the Board for the /proc/cpuinfo @@ -175,6 +176,7 @@ static struct resource bfin_spi0_resource[] = { static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bfin_spi0_device = { diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 34b63920e27..be852034a68 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -34,11 +34,12 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#include <linux/usb_isp1362.h> +#include <linux/usb/isp1362.h> #include <linux/pata_platform.h> #include <linux/irq.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> /* * Name the Board for the /proc/cpuinfo @@ -187,6 +188,7 @@ static struct resource bfin_spi0_resource[] = { static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bfin_spi0_device = { diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c index 310b7772c45..e359a0d6467 100644 --- a/arch/blackfin/mach-bf533/boards/generic_board.c +++ b/arch/blackfin/mach-bf533/boards/generic_board.c @@ -58,10 +58,6 @@ static struct resource smc91x_resources[] = { .end = IRQ_PROG_INTB, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, { - /* - * denotes the flag pin and is used directly if - * CONFIG_IRQCHIP_DEMUX_GPIO is defined. - */ .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 62ffa500420..8fde8d83285 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -35,13 +35,14 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb_isp1362.h> +#include <linux/usb/isp1362.h> #endif #include <linux/pata_platform.h> #include <linux/irq.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> +#include <asm/portmux.h> /* * Name the Board for the /proc/cpuinfo @@ -286,6 +287,7 @@ static struct resource bfin_spi0_resource[] = { static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bfin_spi0_device = { diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig index e6648db0951..8255374c04a 100644 --- a/arch/blackfin/mach-bf537/Kconfig +++ b/arch/blackfin/mach-bf537/Kconfig @@ -1,5 +1,7 @@ if (BF537 || BF534 || BF536) +source "arch/blackfin/mach-bf537/boards/Kconfig" + menu "BF537 Specific Configuration" comment "Interrupt Priority Assignment" diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig new file mode 100644 index 00000000000..96a15196e41 --- /dev/null +++ b/arch/blackfin/mach-bf537/boards/Kconfig @@ -0,0 +1,29 @@ +choice + prompt "System type" + default BFIN537_STAMP + help + Select your board! + +config BFIN537_STAMP + bool "BF537-STAMP" + help + BF537-STAMP board support. + +config BFIN537_BLUETECHNIX_CM + bool "Bluetechnix CM-BF537" + depends on (BF537) + help + CM-BF537 support for EVAL- and DEV-Board. + +config PNAV10 + bool "PNAV board" + depends on (BF537) + help + PNAV board support. + +config GENERIC_BF537_BOARD + bool "Generic" + help + Generic or Custom board support. + +endchoice diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile index 23323cacc3a..94a85174283 100644 --- a/arch/blackfin/mach-bf537/boards/Makefile +++ b/arch/blackfin/mach-bf537/boards/Makefile @@ -2,8 +2,7 @@ # arch/blackfin/mach-bf537/boards/Makefile # -obj-y += eth_mac.o -obj-$(CONFIG_GENERIC_BOARD) += generic_board.o -obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o -obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o -obj-$(CONFIG_PNAV10) += pnav10.o +obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o +obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o +obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o +obj-$(CONFIG_PNAV10) += pnav10.o diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 2915931045e..c0fb06dbc42 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -34,11 +34,12 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#include <linux/usb_isp1362.h> +#include <linux/usb/isp1362.h> #include <linux/pata_platform.h> #include <linux/irq.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> /* * Name the Board for the /proc/cpuinfo @@ -194,6 +195,7 @@ static struct resource bfin_spi0_resource[] = { static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bfin_spi0_device = { @@ -425,3 +427,10 @@ static int __init cm_bf537_init(void) } arch_initcall(cm_bf537_init); + +void bfin_get_ether_addr(char *addr) +{ + random_ether_addr(addr); + printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); +} +EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf537/boards/eth_mac.c b/arch/blackfin/mach-bf537/boards/eth_mac.c deleted file mode 100644 index a725cc8a929..00000000000 --- a/arch/blackfin/mach-bf537/boards/eth_mac.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/blackfin/mach-bf537/board/eth_mac.c - * - * Copyright (C) 2007 Analog Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/module.h> -#include <asm/blackfin.h> - -#if defined(CONFIG_GENERIC_BOARD) || defined(CONFIG_BFIN537_STAMP) - -/* - * Currently the MAC address is saved in Flash by U-Boot - */ -#define FLASH_MAC 0x203f0000 - -void get_bf537_ether_addr(char *addr) -{ - unsigned int flash_mac = (unsigned int) FLASH_MAC; - *(u32 *)(&(addr[0])) = bfin_read32(flash_mac); - flash_mac += 4; - *(u16 *)(&(addr[4])) = bfin_read16(flash_mac); -} - -#else - -/* - * Provide MAC address function for other specific board setting - */ -void get_bf537_ether_addr(char *addr) -{ - printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n", __FILE__); -} - -#endif - -EXPORT_SYMBOL(get_bf537_ether_addr); diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 255da7a9848..09f4bfbd235 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -35,7 +35,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb_isp1362.h> +#include <linux/usb/isp1362.h> #endif #include <linux/pata_platform.h> #include <linux/irq.h> @@ -44,6 +44,7 @@ #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> +#include <asm/portmux.h> #include <linux/spi/ad7877.h> /* @@ -502,7 +503,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .platform_data = &bfin_ad7877_ts_info, .irq = IRQ_PF6, .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &spi_ad7877_chip_info, }, @@ -513,6 +514,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; /* SPI (0) */ @@ -730,3 +732,10 @@ void native_machine_restart(char *cmd) if ((bfin_read_SYSCR() & 0x7) == 0x3) bfin_gpio_reset_spi0_ssel1(); } + +void bfin_get_ether_addr(char *addr) +{ + random_ether_addr(addr); + printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); +} +EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 87b80892678..fd5f4a6f08e 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -35,11 +35,12 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb_isp1362.h> +#include <linux/usb/isp1362.h> #endif #include <linux/irq.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> #include <linux/usb/sl811.h> #include <linux/spi/ad7877.h> @@ -295,7 +296,7 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = { #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .cs_change_per_word = 1, + .cs_change_per_word = 0, .enable_dma = 0, .bits_per_word = 16, }; @@ -387,7 +388,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .platform_data = &bfin_ad7877_ts_info, .irq = IRQ_PF2, .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 5, .controller_data = &spi_ad7877_chip_info, }, @@ -413,6 +414,7 @@ static struct resource bfin_spi0_resource[] = { static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bfin_spi0_device = { @@ -508,3 +510,10 @@ static int __init stamp_init(void) } arch_initcall(stamp_init); + +void bfin_get_ether_addr(char *addr) +{ + random_ether_addr(addr); + printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); +} +EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 5f7b91fbafe..07b0dc273d2 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -35,7 +35,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb_isp1362.h> +#include <linux/usb/isp1362.h> #endif #include <linux/pata_platform.h> #include <linux/irq.h> @@ -44,6 +44,7 @@ #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> +#include <asm/portmux.h> #include <linux/spi/ad7877.h> /* @@ -182,6 +183,28 @@ static struct platform_device dm9000_device = { }; #endif +#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE) +static struct resource ax88180_resources[] = { + [0] = { + .start = 0x20300000, + .end = 0x20300000 + 0x8000, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL), + }, +}; + +static struct platform_device ax88180_device = { + .name = "ax88180", + .id = -1, + .num_resources = ARRAY_SIZE(ax88180_resources), + .resource = ax88180_resources, +}; +#endif + #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) static struct resource sl811_hcd_resources[] = { { @@ -502,7 +525,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .platform_data = &bfin_ad7877_ts_info, .irq = IRQ_PF6, .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &spi_ad7877_chip_info, }, @@ -513,6 +536,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; /* SPI (0) */ @@ -554,15 +578,20 @@ static struct platform_device bfin_fb_adv7393_device = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 { .start = 0xFFC00400, .end = 0xFFC004FF, .flags = IORESOURCE_MEM, - }, { + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { .start = 0xFFC02000, .end = 0xFFC020FF, .flags = IORESOURCE_MEM, }, +#endif }; static struct platform_device bfin_uart_device = { @@ -669,6 +698,10 @@ static struct platform_device *stamp_devices[] __initdata = { &dm9000_device, #endif +#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE) + &ax88180_device, +#endif + #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) &bfin_mac_device, #endif @@ -730,3 +763,14 @@ void native_machine_restart(char *cmd) if ((bfin_read_SYSCR() & 0x7) == 0x3) bfin_gpio_reset_spi0_ssel1(); } + +/* + * Currently the MAC address is saved in Flash by U-Boot + */ +#define FLASH_MAC 0x203f0000 +void bfin_get_ether_addr(char *addr) +{ + *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC); + *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4); +} +EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index 08d8dc83701..d8bd3b49f15 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -1,5 +1,7 @@ if (BF54x) +source "arch/blackfin/mach-bf548/boards/Kconfig" + menu "BF548 Specific Configuration" config DEB_DMA_URGENT diff --git a/arch/blackfin/mach-bf548/boards/Kconfig b/arch/blackfin/mach-bf548/boards/Kconfig new file mode 100644 index 00000000000..05712906403 --- /dev/null +++ b/arch/blackfin/mach-bf548/boards/Kconfig @@ -0,0 +1,12 @@ +choice + prompt "System type" + default BFIN548_EZKIT + help + Select your board! + +config BFIN548_EZKIT + bool "BF548-EZKIT" + help + BFIN548-EZKIT board support. + +endchoice diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile index 486e07c99a5..a444cc73957 100644 --- a/arch/blackfin/mach-bf548/boards/Makefile +++ b/arch/blackfin/mach-bf548/boards/Makefile @@ -2,4 +2,4 @@ # arch/blackfin/mach-bf548/boards/Makefile # -obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o +obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 6b6490e66b3..d37d6653c4b 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -42,6 +42,7 @@ #include <asm/dma.h> #include <asm/gpio.h> #include <asm/nand.h> +#include <asm/portmux.h> #include <asm/mach/bf54x_keys.h> #include <linux/input.h> #include <linux/spi/ad7877.h> @@ -377,7 +378,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .cs_change_per_word = 1, + .cs_change_per_word = 0, .enable_dma = 0, .bits_per_word = 16, }; @@ -453,9 +454,10 @@ static struct resource bfin_spi1_resource[] = { }; /* SPI controller data */ -static struct bfin5xx_spi_master bf54x_spi_master_info = { +static struct bfin5xx_spi_master bf54x_spi_master_info0 = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bf54x_spi_master0 = { @@ -464,17 +466,23 @@ static struct platform_device bf54x_spi_master0 = { .num_resources = ARRAY_SIZE(bfin_spi0_resource), .resource = bfin_spi0_resource, .dev = { - .platform_data = &bf54x_spi_master_info, /* Passed to driver */ + .platform_data = &bf54x_spi_master_info0, /* Passed to driver */ }, }; +static struct bfin5xx_spi_master bf54x_spi_master_info1 = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, +}; + static struct platform_device bf54x_spi_master1 = { .name = "bfin-spi", .id = 1, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi1_resource), .resource = bfin_spi1_resource, .dev = { - .platform_data = &bf54x_spi_master_info, /* Passed to driver */ + .platform_data = &bf54x_spi_master_info1, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -500,6 +508,7 @@ static struct platform_device i2c_bfin_twi0_device = { .resource = bfin_twi0_resource, }; +#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ static struct resource bfin_twi1_resource[] = { [0] = { .start = TWI1_REGBASE, @@ -520,6 +529,7 @@ static struct platform_device i2c_bfin_twi1_device = { .resource = bfin_twi1_resource, }; #endif +#endif static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) @@ -569,8 +579,10 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) &i2c_bfin_twi0_device, +#if !defined(CONFIG_BF542) &i2c_bfin_twi1_device, #endif +#endif }; static int __init stamp_init(void) diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 3071c243d42..74b34c7f362 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -158,6 +158,27 @@ ENTRY(__stext) w[p2] = r0; ssync; + p2.h = hi(EBIU_MBSCTL); + p2.l = lo(EBIU_MBSCTL); + r0.h = hi(CONFIG_EBIU_MBSCTLVAL); + r0.l = lo(CONFIG_EBIU_MBSCTLVAL); + [p2] = r0; + ssync; + + p2.h = hi(EBIU_MODE); + p2.l = lo(EBIU_MODE); + r0.h = hi(CONFIG_EBIU_MODEVAL); + r0.l = lo(CONFIG_EBIU_MODEVAL); + [p2] = r0; + ssync; + + p2.h = hi(EBIU_FCTL); + p2.l = lo(EBIU_FCTL); + r0.h = hi(CONFIG_EBIU_FCTLVAL); + r0.l = lo(CONFIG_EBIU_FCTLVAL); + [p2] = r0; + ssync; + /* This section keeps the processor in supervisor mode * during kernel boot. Switches to user mode at end of boot. * See page 3-9 of Hardware Reference manual for documentation. diff --git a/arch/blackfin/mach-bf561/Kconfig b/arch/blackfin/mach-bf561/Kconfig index 0a17c4cf005..3f4895450be 100644 --- a/arch/blackfin/mach-bf561/Kconfig +++ b/arch/blackfin/mach-bf561/Kconfig @@ -1,4 +1,6 @@ -if BF561 +if (BF561) + +source "arch/blackfin/mach-bf561/boards/Kconfig" menu "BF561 Specific Configuration" diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig new file mode 100644 index 00000000000..e41a67b1fb5 --- /dev/null +++ b/arch/blackfin/mach-bf561/boards/Kconfig @@ -0,0 +1,27 @@ +choice + prompt "System type" + default BFIN561_EZKIT + help + Select your board! + +config BFIN561_EZKIT + bool "BF561-EZKIT" + help + BF561-EZKIT-LITE board support. + +config BFIN561_TEPLA + bool "BF561-TEPLA" + help + BF561-TEPLA board support. + +config BFIN561_BLUETECHNIX_CM + bool "Bluetechnix CM-BF561" + help + CM-BF561 support for EVAL- and DEV-Board. + +config GENERIC_BF561_BOARD + bool "Generic" + help + Generic or Custom board support. + +endchoice diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile index 495a1cf9d45..04add010b56 100644 --- a/arch/blackfin/mach-bf561/boards/Makefile +++ b/arch/blackfin/mach-bf561/boards/Makefile @@ -2,7 +2,7 @@ # arch/blackfin/mach-bf561/boards/Makefile # -obj-$(CONFIG_GENERIC_BOARD) += generic_board.o +obj-$(CONFIG_GENERIC_BF561_BOARD) += generic_board.o obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o obj-$(CONFIG_BFIN561_TEPLA) += tepla.o diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 97aeb43fd8b..c19cd29b948 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -33,11 +33,12 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#include <linux/usb_isp1362.h> +#include <linux/usb/isp1362.h> #include <linux/pata_platform.h> #include <linux/irq.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> /* * Name the Board for the /proc/cpuinfo @@ -182,6 +183,7 @@ static struct resource bfin_spi0_resource[] = { static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bfin_spi0_device = { diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 059d516cec2..4ff8f6e7a11 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -35,6 +35,7 @@ #include <linux/pata_platform.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> /* * Name the Board for the /proc/cpuinfo @@ -115,6 +116,28 @@ static struct platform_device smc91x_device = { }; #endif +#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE) +static struct resource ax88180_resources[] = { + [0] = { + .start = 0x2c000000, + .end = 0x2c000000 + 0x8000, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF10, + .end = IRQ_PF10, + .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL), + }, +}; + +static struct platform_device ax88180_device = { + .name = "ax88180", + .id = -1, + .num_resources = ARRAY_SIZE(ax88180_resources), + .resource = ax88180_resources, +}; +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { { @@ -160,6 +183,7 @@ static struct resource bfin_spi0_resource[] = { static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bfin_spi0_device = { @@ -226,6 +250,11 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif + +#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE) + &ax88180_device, +#endif + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, #endif diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c index 46816be4b2b..fc80c5d059f 100644 --- a/arch/blackfin/mach-bf561/boards/generic_board.c +++ b/arch/blackfin/mach-bf561/boards/generic_board.c @@ -48,10 +48,6 @@ static struct resource smc91x_resources[] = { .end = IRQ_PROG_INTB, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, { - /* - * denotes the flag pin and is used directly if - * CONFIG_IRQCHIP_DEMUX_GPIO is defined. - */ .start = IRQ_PF9, .end = IRQ_PF9, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c index 4a17c6da2a5..ec6a2207c20 100644 --- a/arch/blackfin/mach-bf561/boards/tepla.c +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -31,10 +31,6 @@ static struct resource smc91x_resources[] = { .end = IRQ_PROG_INTB, .flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL, }, { - /* - * denotes the flag pin and is used directly if - * CONFIG_IRQCHIP_DEMUX_GPIO is defined. - */ .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL, diff --git a/arch/blackfin/mach-common/cplbinfo.c b/arch/blackfin/mach-common/cplbinfo.c index 785ca981697..a4f0b428a34 100644 --- a/arch/blackfin/mach-common/cplbinfo.c +++ b/arch/blackfin/mach-common/cplbinfo.c @@ -91,7 +91,7 @@ static char *cplb_print_entry(char *buf, int type) } else buf += sprintf(buf, "Data CPLB entry:\n"); - buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\n\tiCount\toCount\n"); + buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\tiCount\toCount\n"); while (*p_addr != 0xffffffff) { entry = cplb_find_entry(cplb_addr, cplb_data, *p_addr, *p_data); diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S index 946703ef48f..6f909cbfac7 100644 --- a/arch/blackfin/mach-common/cplbmgr.S +++ b/arch/blackfin/mach-common/cplbmgr.S @@ -73,7 +73,7 @@ ENTRY(_cplb_mgr) /* ICPLB Miss Exception. We need to choose one of the * currently-installed CPLBs, and replace it with one * from the configuration table. - */ + */ P4.L = LO(ICPLB_FAULT_ADDR); P4.H = HI(ICPLB_FAULT_ADDR); @@ -222,7 +222,7 @@ ENTRY(_cplb_mgr) /* See if failed address > start address */ CC = R4 <= R0(IU); - IF !CC JUMP .Linext; + IF !CC JUMP .Linext; /* extract page size (17:16)*/ R3 = EXTRACT(R2, R1.L) (Z); @@ -271,16 +271,27 @@ ENTRY(_cplb_mgr) /* FAILED CASES*/ .Lno_page_in_table: - ( R7:4,P5:3 ) = [SP++]; R0 = CPLB_NO_ADDR_MATCH; - RTS; + JUMP .Lfail_ret; + .Lall_locked: - ( R7:4,P5:3 ) = [SP++]; R0 = CPLB_NO_UNLOCKED; - RTS; + JUMP .Lfail_ret; + .Lprot_violation: - ( R7:4,P5:3 ) = [SP++]; R0 = CPLB_PROT_VIOL; + +.Lfail_ret: + /* Make sure we turn protection/cache back on, even in the failing case */ + BITSET(R5,ENICPLB_P); + CLI R2; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + STI R2; + + ( R7:4,P5:3 ) = [SP++]; RTS; .Ldcplb_write: diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 1b13fa47097..dc9d3ee2e69 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -33,7 +33,7 @@ * after a timer-interrupt and after each system call. */ - +#include <linux/init.h> #include <linux/linkage.h> #include <linux/unistd.h> #include <asm/blackfin.h> @@ -71,25 +71,44 @@ ENDPROC(_safe_speculative_execution) * This one does not lower the level to IRQ5, and thus can be used to * patch up CPLB misses on the kernel stack. */ -ENTRY(_ex_dcplb) #if ANOMALY_05000261 +#define _ex_dviol _ex_workaround_261 +#define _ex_dmiss _ex_workaround_261 +#define _ex_dmult _ex_workaround_261 + +ENTRY(_ex_workaround_261) /* * Work around an anomaly: if we see a new DCPLB fault, return * without doing anything. Then, if we get the same fault again, * handle it. */ + P4 = R7; /* Store EXCAUSE */ p5.l = _last_cplb_fault_retx; p5.h = _last_cplb_fault_retx; r7 = [p5]; r6 = retx; [p5] = r6; cc = r6 == r7; - if !cc jump _return_from_exception; + if !cc jump _bfin_return_from_exception; /* fall through */ + R7 = P4; + R6 = 0x26; /* Data CPLB Miss */ + cc = R6 == R7; + if cc jump _ex_dcplb_miss (BP); + /* Handle 0x23 Data CPLB Protection Violation + * and Data CPLB Multiple Hits - Linux Trap Zero + */ + jump _ex_trap_c; +ENDPROC(_ex_workaround_261) + +#else +#define _ex_dviol _ex_trap_c +#define _ex_dmiss _ex_dcplb_miss +#define _ex_dmult _ex_trap_c #endif -ENDPROC(_ex_dcplb) -ENTRY(_ex_icplb) +ENTRY(_ex_dcplb_miss) +ENTRY(_ex_icplb_miss) (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; SAVE_ALL_SYS @@ -98,7 +117,7 @@ ENTRY(_ex_icplb) RESTORE_ALL_SYS SP = EX_SCRATCH_REG; rtx; -ENDPROC(_ex_icplb) +ENDPROC(_ex_icplb_miss) ENTRY(_ex_syscall) DEBUG_START_HWTRACE(p5, r7) @@ -120,7 +139,7 @@ ENTRY(_ex_single_step) r7 = retx; r6 = reti; cc = r7 == r6; - if cc jump _return_from_exception + if cc jump _bfin_return_from_exception r7 = syscfg; bitclr (r7, 0); syscfg = R7; @@ -137,8 +156,9 @@ ENTRY(_ex_single_step) r7 = [p4]; cc = r6 == r7; if !cc jump _ex_trap_c; +ENDPROC(_ex_single_step) -ENTRY(_return_from_exception) +ENTRY(_bfin_return_from_exception) DEBUG_START_HWTRACE(p5, r7) #if ANOMALY_05000257 R7=LC0; @@ -150,7 +170,7 @@ ENTRY(_return_from_exception) ASTAT = [sp++]; sp = EX_SCRATCH_REG; rtx; -ENDPROC(_ex_soft_bp) +ENDPROC(_bfin_return_from_exception) ENTRY(_handle_bad_cplb) /* To get here, we just tried and failed to change a CPLB @@ -843,7 +863,7 @@ ENTRY(_ex_trace_buff_full) LC0 = [sp++]; P2 = [sp++]; P3 = [sp++]; - jump _return_from_exception; + jump _bfin_return_from_exception; ENDPROC(_ex_trace_buff_full) #if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4 @@ -861,7 +881,7 @@ ENTRY(_software_trace_buff) #endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */ #if CONFIG_EARLY_PRINTK -.section .init.text +__INIT ENTRY(_early_trap) SAVE_ALL_SYS trace_buffer_stop(p0,r0); @@ -896,6 +916,7 @@ ENTRY(_early_trap) call _early_trap_c; SP += 12; ENDPROC(_early_trap) +__FINIT #endif /* CONFIG_EARLY_PRINTK */ /* @@ -908,6 +929,7 @@ ENDPROC(_early_trap) #else .data #endif + ENTRY(_ex_table) /* entry for each EXCAUSE[5:0] * This table must be in sync with the table in ./kernel/traps.c @@ -952,16 +974,16 @@ ENTRY(_ex_table) .long _ex_trap_c /* 0x20 - Reserved */ .long _ex_trap_c /* 0x21 - Undefined Instruction */ .long _ex_trap_c /* 0x22 - Illegal Instruction Combination */ - .long _ex_dcplb /* 0x23 - Data CPLB Protection Violation */ + .long _ex_dviol /* 0x23 - Data CPLB Protection Violation */ .long _ex_trap_c /* 0x24 - Data access misaligned */ .long _ex_trap_c /* 0x25 - Unrecoverable Event */ - .long _ex_dcplb /* 0x26 - Data CPLB Miss */ - .long _ex_trap_c /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */ + .long _ex_dmiss /* 0x26 - Data CPLB Miss */ + .long _ex_dmult /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */ .long _ex_trap_c /* 0x28 - Emulation Watchpoint */ .long _ex_trap_c /* 0x29 - Instruction fetch access error (535 only) */ .long _ex_trap_c /* 0x2A - Instruction fetch misaligned */ - .long _ex_icplb /* 0x2B - Instruction CPLB protection Violation */ - .long _ex_icplb /* 0x2C - Instruction CPLB miss */ + .long _ex_trap_c /* 0x2B - Instruction CPLB protection Violation */ + .long _ex_icplb_miss /* 0x2C - Instruction CPLB miss */ .long _ex_trap_c /* 0x2D - Instruction CPLB Multiple Hits */ .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */ .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */ diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index c6b32fe0f6e..4de376418a1 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -30,7 +30,6 @@ #include <asm/blackfin.h> #include <asm/mach/irq.h> -#include <linux/autoconf.h> #include <linux/linkage.h> #include <asm/entry.h> #include <asm/asm-offsets.h> diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c index c2f05fabedc..4882f0e801a 100644 --- a/arch/blackfin/mach-common/ints-priority-dc.c +++ b/arch/blackfin/mach-common/ints-priority-dc.c @@ -181,7 +181,6 @@ static struct irq_chip bf561_internal_irqchip = { .unmask = bf561_internal_unmask_irq, }; -#ifdef CONFIG_IRQCHIP_DEMUX_GPIO static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)]; @@ -362,8 +361,6 @@ static void bf561_demux_gpio_irq(unsigned int inta_irq, } -#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */ - void __init init_exception_vectors(void) { SSYNC(); @@ -413,26 +410,21 @@ int __init init_arch_irq(void) set_irq_chip(irq, &bf561_core_irqchip); else set_irq_chip(irq, &bf561_internal_irqchip); -#ifdef CONFIG_IRQCHIP_DEMUX_GPIO + if ((irq != IRQ_PROG0_INTA) && - (irq != IRQ_PROG1_INTA) && (irq != IRQ_PROG2_INTA)) { -#endif + (irq != IRQ_PROG1_INTA) && + (irq != IRQ_PROG2_INTA)) set_irq_handler(irq, handle_simple_irq); -#ifdef CONFIG_IRQCHIP_DEMUX_GPIO - } else { + else set_irq_chained_handler(irq, bf561_demux_gpio_irq); - } -#endif - } -#ifdef CONFIG_IRQCHIP_DEMUX_GPIO for (irq = IRQ_PF0; irq <= IRQ_PF47; irq++) { set_irq_chip(irq, &bf561_gpio_irqchip); /* if configured as edge, then will be changed to do_edge_IRQ */ set_irq_handler(irq, handle_level_irq); } -#endif + bfin_write_IMASK(0); CSYNC(); ilat = bfin_read_ILAT(); @@ -457,9 +449,8 @@ int __init init_arch_irq(void) } #ifdef CONFIG_DO_IRQ_L1 -void do_irq(int vec, struct pt_regs *fp)__attribute__((l1_text)); +__attribute__((l1_text)) #endif - void do_irq(int vec, struct pt_regs *fp) { if (vec == EVT_IVTMR_P) { diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c index 2d2b63567b3..147f0731087 100644 --- a/arch/blackfin/mach-common/ints-priority-sc.c +++ b/arch/blackfin/mach-common/ints-priority-sc.c @@ -308,7 +308,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, } #endif /* BF537_GENERIC_ERROR_INT_DEMUX */ -#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && !defined(CONFIG_BF54x) +#if !defined(CONFIG_BF54x) static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)]; @@ -464,7 +464,7 @@ static void bfin_demux_gpio_irq(unsigned int intb_irq, } } -#else /* CONFIG_IRQCHIP_DEMUX_GPIO */ +#else /* CONFIG_BF54x */ #define NR_PINT_SYS_IRQS 4 #define NR_PINT_BITS 32 @@ -726,7 +726,7 @@ static void bfin_demux_gpio_irq(unsigned int intb_irq, } } -#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */ +#endif void __init init_exception_vectors(void) { @@ -766,10 +766,10 @@ int __init init_arch_irq(void) bfin_write_SIC_IMASK1(SIC_UNMASK_ALL); bfin_write_SIC_IWR0(IWR_ENABLE_ALL); bfin_write_SIC_IWR1(IWR_ENABLE_ALL); -#ifdef CONFIG_BF54x +# ifdef CONFIG_BF54x bfin_write_SIC_IMASK2(SIC_UNMASK_ALL); bfin_write_SIC_IWR2(IWR_ENABLE_ALL); -#endif +# endif #else bfin_write_SIC_IMASK(SIC_UNMASK_ALL); bfin_write_SIC_IWR(IWR_ENABLE_ALL); @@ -778,13 +778,13 @@ int __init init_arch_irq(void) local_irq_disable(); -#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && defined(CONFIG_BF54x) -#ifdef CONFIG_PINTx_REASSIGN +#ifdef CONFIG_BF54x +# ifdef CONFIG_PINTx_REASSIGN pint[0]->assign = CONFIG_PINT0_ASSIGN; pint[1]->assign = CONFIG_PINT1_ASSIGN; pint[2]->assign = CONFIG_PINT2_ASSIGN; pint[3]->assign = CONFIG_PINT3_ASSIGN; -#endif +# endif /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ init_pint_lut(); #endif @@ -799,18 +799,17 @@ int __init init_arch_irq(void) #endif switch (irq) { -#ifdef CONFIG_IRQCHIP_DEMUX_GPIO #if defined(CONFIG_BF53x) case IRQ_PROG_INTA: set_irq_chained_handler(irq, bfin_demux_gpio_irq); break; -#if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) +# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) case IRQ_MAC_RX: set_irq_chained_handler(irq, bfin_demux_gpio_irq); break; -#endif +# endif #elif defined(CONFIG_BF54x) case IRQ_PINT0: set_irq_chained_handler(irq, @@ -842,7 +841,6 @@ int __init init_arch_irq(void) bfin_demux_gpio_irq); break; #endif -#endif default: set_irq_handler(irq, handle_simple_irq); break; @@ -861,7 +859,6 @@ int __init init_arch_irq(void) } #endif -#ifdef CONFIG_IRQCHIP_DEMUX_GPIO #ifndef CONFIG_BF54x for (irq = IRQ_PF0; irq < NR_IRQS; irq++) { #else @@ -871,7 +868,7 @@ int __init init_arch_irq(void) /* if configured as edge, then will be changed to do_edge_IRQ */ set_irq_handler(irq, handle_level_irq); } -#endif + bfin_write_IMASK(0); CSYNC(); ilat = bfin_read_ILAT(); @@ -896,9 +893,8 @@ int __init init_arch_irq(void) } #ifdef CONFIG_DO_IRQ_L1 -void do_irq(int vec, struct pt_regs *fp) __attribute__((l1_text)); +__attribute__((l1_text)) #endif - void do_irq(int vec, struct pt_regs *fp) { if (vec == EVT_IVTMR_P) { diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c index f05e3dadaf3..b22959b197e 100644 --- a/arch/blackfin/mach-common/irqpanic.c +++ b/arch/blackfin/mach-common/irqpanic.c @@ -153,27 +153,29 @@ asmlinkage void irq_panic(int reason, struct pt_regs *regs) case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): /* System MMR Error */ info.si_code = BUS_ADRALN; sig = SIGBUS; - printk(KERN_EMERG HWC_x2); + printk(KERN_EMERG HWC_x2(KERN_EMERG)); break; case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): /* External Memory Addressing Error */ info.si_code = BUS_ADRERR; sig = SIGBUS; - printk(KERN_EMERG HWC_x3); + printk(KERN_EMERG HWC_x3(KERN_EMERG)); break; case (SEQSTAT_HWERRCAUSE_PERF_FLOW): /* Performance Monitor Overflow */ - printk(KERN_EMERG HWC_x12); + printk(KERN_EMERG HWC_x12(KERN_EMERG)); break; case (SEQSTAT_HWERRCAUSE_RAISE_5): /* RAISE 5 instruction */ - printk(KERN_EMERG HWC_x18); + printk(KERN_EMERG HWC_x18(KERN_EMERG)); break; default: /* Reserved */ - printk(KERN_EMERG HWC_default); + printk(KERN_EMERG HWC_default(KERN_EMERG)); break; } } regs->ipend = bfin_read_IPEND(); - dump_bfin_regs(regs, (void *)regs->pc); + dump_bfin_process(regs); + dump_bfin_mem((void *)regs->pc); + show_regs(regs); if (0 == (info.si_signo = sig) || 0 == user_mode(regs)) /* in kernelspace */ panic("Unhandled IRQ or exceptions!\n"); else { /* in userspace */ diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index b99ea883cd2..e41f0e8ecac 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -27,7 +27,6 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/autoconf.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 5ce632ca681..b88569e21d6 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -21,7 +21,7 @@ if SERIO config SERIO_I8042 tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86 default y - depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BFIN + depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BLACKFIN ---help--- i8042 is the chip over which the standard AT keyboard and PS/2 mouse are connected to the computer. If you use these devices, diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 084acfd6fc5..0b99b554929 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -924,7 +924,7 @@ static int __init bf537mac_probe(struct net_device *dev) if (!is_valid_ether_addr(dev->dev_addr)) { /* Grab the MAC from the board somehow - this is done in the arch/blackfin/mach-bf537/boards/eth_mac.c */ - get_bf537_ether_addr(dev->dev_addr); + bfin_get_ether_addr(dev->dev_addr); } /* If still not valid, get a random one */ diff --git a/drivers/net/bfin_mac.h b/drivers/net/bfin_mac.h index 3a107ad7538..5970ea7142c 100644 --- a/drivers/net/bfin_mac.h +++ b/drivers/net/bfin_mac.h @@ -92,4 +92,4 @@ struct bf537mac_local { struct mii_bus mii_bus; }; -extern void get_bf537_ether_addr(char *addr); +extern void bfin_get_ether_addr(char *addr); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index e5cdc0294aa..1e6715ec51e 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -447,7 +447,7 @@ config RTC_DRV_AT91RM9200 config RTC_DRV_BFIN tristate "Blackfin On-Chip RTC" - depends on BFIN + depends on BLACKFIN help If you say yes here you will get support for the Blackfin On-Chip Real Time Clock. diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index ed438bc7e98..d7e1996e2fe 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -600,7 +600,7 @@ config SERIAL_SA1100_CONSOLE config SERIAL_BFIN tristate "Blackfin serial port support" - depends on BFIN + depends on BLACKFIN select SERIAL_CORE select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561) help diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a77ede598d3..abf05048c63 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -61,7 +61,7 @@ config SPI_ATMEL config SPI_BFIN tristate "SPI controller driver for ADI Blackfin5xx" - depends on SPI_MASTER && BFIN + depends on SPI_MASTER && BLACKFIN help This is the SPI controller master driver for Blackfin 5xx processor. diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index 267422f6625..b87ed37ac0c 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -6,7 +6,7 @@ menu "Console display driver support" config VGA_CONSOLE bool "VGA text console" if EMBEDDED || !X86 - depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BFIN + depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN default y help Saying Y here will allow you to use Linux in text mode through a diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h index 0212e180b90..39bdd86871c 100644 --- a/include/asm-blackfin/bfin-global.h +++ b/include/asm-blackfin/bfin-global.h @@ -50,8 +50,8 @@ extern unsigned long get_sclk(void); extern unsigned long sclk_to_usecs(unsigned long sclk); extern unsigned long usecs_to_sclk(unsigned long usecs); -extern void dump_thread(struct pt_regs *regs, struct user *dump); -extern void dump_bfin_regs(struct pt_regs *fp, void *retaddr); +extern void dump_bfin_process(struct pt_regs *regs); +extern void dump_bfin_mem(void *retaddr); extern void dump_bfin_trace_buffer(void); extern int init_arch_irq(void); @@ -63,6 +63,7 @@ extern void bfin_dcache_init(void); extern int read_iloc(void); extern int bfin_console_init(void); extern asmlinkage void lower_to_irq14(void); +extern asmlinkage void bfin_return_from_exception(void); extern void init_exception_vectors(void); extern void init_dma(void); extern void program_IAR(void); diff --git a/include/asm-blackfin/cplbinit.h b/include/asm-blackfin/cplbinit.h index bec6ecdf1bd..c4d0596e8e9 100644 --- a/include/asm-blackfin/cplbinit.h +++ b/include/asm-blackfin/cplbinit.h @@ -27,6 +27,9 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#ifndef __ASM_CPLBINIT_H__ +#define __ASM_CPLBINIT_H__ + #include <asm/blackfin.h> #include <asm/cplb.h> @@ -57,8 +60,8 @@ struct cplb_tab { u16 size; }; -extern u_long icplb_table[MAX_CPLBS+1]; -extern u_long dcplb_table[MAX_CPLBS+1]; +extern u_long icplb_table[]; +extern u_long dcplb_table[]; /* Till here we are discussing about the static memory management model. * However, the operating envoronments commonly define more CPLB @@ -69,28 +72,16 @@ extern u_long dcplb_table[MAX_CPLBS+1]; * This is how Page descriptor Table is implemented in uClinux/Blackfin. */ -#ifdef CONFIG_CPLB_SWITCH_TAB_L1 -extern u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data)); -extern u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data)); - -#ifdef CONFIG_CPLB_INFO -extern u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data)); -extern u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data)); -#endif /* CONFIG_CPLB_INFO */ - -#else - -extern u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]; -extern u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]; - +extern u_long ipdt_table[]; +extern u_long dpdt_table[]; #ifdef CONFIG_CPLB_INFO -extern u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]; -extern u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]; -#endif /* CONFIG_CPLB_INFO */ - -#endif /*CONFIG_CPLB_SWITCH_TAB_L1*/ +extern u_long ipdt_swapcount_table[]; +extern u_long dpdt_swapcount_table[]; +#endif extern unsigned long reserved_mem_dcache_on; extern unsigned long reserved_mem_icache_on; extern void generate_cpl_tables(void); + +#endif diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h index 52e7a10d7ff..473a8113277 100644 --- a/include/asm-blackfin/delay.h +++ b/include/asm-blackfin/delay.h @@ -1,29 +1,47 @@ -#ifndef _BLACKFIN_DELAY_H -#define _BLACKFIN_DELAY_H - -static inline void __delay(unsigned long loops) -{ - -/* FIXME: Currently the assembler doesn't recognize Loop Register Clobbers, - uncomment this as soon those are implemented */ /* - __asm__ __volatile__ ( "\t LSETUP (1f,1f) LC0= %0\n\t" - "1:\t NOP;\n\t" - : :"a" (loops) - : "LT0","LB0","LC0"); + * delay.h - delay functions + * + * Copyright (c) 2004-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __ASM_DELAY_H__ +#define __ASM_DELAY_H__ -*/ +#include <asm/mach/anomaly.h> - __asm__ __volatile__("[--SP] = LC0;\n\t" - "[--SP] = LT0;\n\t" - "[--SP] = LB0;\n\t" - "LSETUP (1f,1f) LC0 = %0;\n\t" - "1:\t NOP;\n\t" - "LB0 = [SP++];\n\t" - "LT0 = [SP++];\n\t" - "LC0 = [SP++];\n" - : - :"a" (loops)); +static inline void __delay(unsigned long loops) +{ + if (ANOMALY_05000312) { + /* Interrupted loads to loop registers -> bad */ + unsigned long tmp; + __asm__ __volatile__( + "[--SP] = LC0;" + "[--SP] = LT0;" + "[--SP] = LB0;" + "LSETUP (1f,1f) LC0 = %1;" + "1: NOP;" + /* We take advantage of the fact that LC0 is 0 at + * the end of the loop. Otherwise we'd need some + * NOPs after the CLI here. + */ + "CLI %0;" + "LB0 = [SP++];" + "LT0 = [SP++];" + "LC0 = [SP++];" + "STI %0;" + : "=d" (tmp) + : "a" (loops) + ); + } else + __asm__ __volatile__ ( + "LSETUP(1f, 1f) LC0 = %0;" + "1: NOP;" + : + : "a" (loops) + : "LT0", "LB0", "LC0" + ); } #include <linux/param.h> /* needed for HZ */ @@ -41,4 +59,4 @@ static inline void udelay(unsigned long usecs) __delay(usecs * loops_per_jiffy / (1000000 / HZ)); } -#endif /* defined(_BLACKFIN_DELAY_H) */ +#endif diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index d1d2e6be3b5..1601d62f39a 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -122,6 +122,7 @@ extern void outsl(unsigned long port, const void *addr, unsigned long count); extern void insb(unsigned long port, void *addr, unsigned long count); extern void insw(unsigned long port, void *addr, unsigned long count); extern void insl(unsigned long port, void *addr, unsigned long count); +extern void insl_16(unsigned long port, void *addr, unsigned long count); extern void dma_outsb(unsigned long port, const void *addr, unsigned short count); extern void dma_outsw(unsigned long port, const void *addr, unsigned short count); diff --git a/include/asm-blackfin/mach-bf527/irq.h b/include/asm-blackfin/mach-bf527/irq.h index 304f5bcfebe..4e2b3f2020e 100644 --- a/include/asm-blackfin/mach-bf527/irq.h +++ b/include/asm-blackfin/mach-bf527/irq.h @@ -176,11 +176,7 @@ #define GPIO_IRQ_BASE IRQ_PF0 -#ifdef CONFIG_IRQCHIP_DEMUX_GPIO #define NR_IRQS (IRQ_PH15+1) -#else -#define NR_IRQS (SYS_IRQS+1) -#endif #define IVG7 7 #define IVG8 8 diff --git a/include/asm-blackfin/mach-bf527/mem_map.h b/include/asm-blackfin/mach-bf527/mem_map.h index c5aa20102b2..193082deaa4 100644 --- a/include/asm-blackfin/mach-bf527/mem_map.h +++ b/include/asm-blackfin/mach-bf527/mem_map.h @@ -47,6 +47,7 @@ /* Boot ROM Memory */ #define BOOT_ROM_START 0xEF000000 +#define BOOT_ROM_LENGTH 0x8000 /* Level 1 Memory */ @@ -90,9 +91,7 @@ /* Scratch Pad Memory */ -#if defined(CONFIG_BF527) || defined(CONFIG_BF536) || defined(CONFIG_BF534) #define L1_SCRATCH_START 0xFFB00000 #define L1_SCRATCH_LENGTH 0x1000 -#endif #endif /* _MEM_MAP_527_H_ */ diff --git a/include/asm-blackfin/mach-bf533/irq.h b/include/asm-blackfin/mach-bf533/irq.h index 452fb825d89..832e6f6122d 100644 --- a/include/asm-blackfin/mach-bf533/irq.h +++ b/include/asm-blackfin/mach-bf533/irq.h @@ -130,11 +130,7 @@ Core Emulation ** #define GPIO_IRQ_BASE IRQ_PF0 -#ifdef CONFIG_IRQCHIP_DEMUX_GPIO #define NR_IRQS (IRQ_PF15+1) -#else -#define NR_IRQS SYS_IRQS -#endif #define IVG7 7 #define IVG8 8 diff --git a/include/asm-blackfin/mach-bf533/mem_map.h b/include/asm-blackfin/mach-bf533/mem_map.h index 94d8c4062eb..bd30b6f3be0 100644 --- a/include/asm-blackfin/mach-bf533/mem_map.h +++ b/include/asm-blackfin/mach-bf533/mem_map.h @@ -1,4 +1,3 @@ - /* * File: include/asm-blackfin/mach-bf533/mem_map.h * Based on: @@ -48,6 +47,7 @@ /* Boot ROM Memory */ #define BOOT_ROM_START 0xEF000000 +#define BOOT_ROM_LENGTH 0x400 /* Level 1 Memory */ @@ -160,9 +160,7 @@ /* Scratch Pad Memory */ -#if defined(CONFIG_BF533) || defined(CONFIG_BF532) || defined(CONFIG_BF531) #define L1_SCRATCH_START 0xFFB00000 #define L1_SCRATCH_LENGTH 0x1000 -#endif #endif /* _MEM_MAP_533_H_ */ diff --git a/include/asm-blackfin/mach-bf537/irq.h b/include/asm-blackfin/mach-bf537/irq.h index 36c44bc1a91..be6f2ff77f3 100644 --- a/include/asm-blackfin/mach-bf537/irq.h +++ b/include/asm-blackfin/mach-bf537/irq.h @@ -162,11 +162,7 @@ Core Emulation ** #define GPIO_IRQ_BASE IRQ_PF0 -#ifdef CONFIG_IRQCHIP_DEMUX_GPIO #define NR_IRQS (IRQ_PH15+1) -#else -#define NR_IRQS (IRQ_UART1_ERROR+1) -#endif #define IVG7 7 #define IVG8 8 diff --git a/include/asm-blackfin/mach-bf537/mem_map.h b/include/asm-blackfin/mach-bf537/mem_map.h index 18759e38eaa..5c6726d6f3b 100644 --- a/include/asm-blackfin/mach-bf537/mem_map.h +++ b/include/asm-blackfin/mach-bf537/mem_map.h @@ -47,6 +47,7 @@ /* Boot ROM Memory */ #define BOOT_ROM_START 0xEF000000 +#define BOOT_ROM_LENGTH 0x800 /* Level 1 Memory */ @@ -167,9 +168,7 @@ /* Scratch Pad Memory */ -#if defined(CONFIG_BF537) || defined(CONFIG_BF536) || defined(CONFIG_BF534) #define L1_SCRATCH_START 0xFFB00000 #define L1_SCRATCH_LENGTH 0x1000 -#endif #endif /* _MEM_MAP_537_H_ */ diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/include/asm-blackfin/mach-bf548/bf548.h index 7e6d349beb0..e748588e893 100644 --- a/include/asm-blackfin/mach-bf548/bf548.h +++ b/include/asm-blackfin/mach-bf548/bf548.h @@ -106,24 +106,22 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN) -#ifdef CONFIG_BF542 -#define CPU "BF542" -#define CPUID 0x027c8000 -#endif -#ifdef CONFIG_BF544 -#define CPU "BF544" -#define CPUID 0x027c8000 -#endif -#ifdef CONFIG_BF548 -#define CPU "BF548" -#define CPUID 0x027c6000 -#endif -#ifdef CONFIG_BF549 -#define CPU "BF549" -#endif -#ifndef CPU -#define CPU "UNKNOWN" -#define CPUID 0x0 +#if defined(CONFIG_BF542) +# define CPU "BF542" +# define CPUID 0x027c8000 +#elif defined(CONFIG_BF544) +# define CPU "BF544" +# define CPUID 0x027c8000 +#elif defined(CONFIG_BF547) +# define CPU "BF547" +#elif defined(CONFIG_BF548) +# define CPU "BF548" +# define CPUID 0x027c6000 +#elif defined(CONFIG_BF549) +# define CPU "BF549" +#else +# define CPU "UNKNOWN" +# define CPUID 0x0 #endif #endif /* __MACH_BF48_H__ */ diff --git a/include/asm-blackfin/mach-bf548/defBF544.h b/include/asm-blackfin/mach-bf548/defBF544.h index 760307e34b9..b8b9870e269 100644 --- a/include/asm-blackfin/mach-bf548/defBF544.h +++ b/include/asm-blackfin/mach-bf548/defBF544.h @@ -645,7 +645,7 @@ /* Bit masks for HOST_STATUS */ -#define READY 0x1 /* DMA Ready */ +#define DMA_READY 0x1 /* DMA Ready */ #define FIFOFULL 0x2 /* FIFO Full */ #define FIFOEMPTY 0x4 /* FIFO Empty */ #define COMPLETE 0x8 /* DMA Complete */ diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/include/asm-blackfin/mach-bf548/defBF548.h index 70af33c963b..ecbca952985 100644 --- a/include/asm-blackfin/mach-bf548/defBF548.h +++ b/include/asm-blackfin/mach-bf548/defBF548.h @@ -1007,7 +1007,7 @@ /* Bit masks for HOST_STATUS */ -#define READY 0x1 /* DMA Ready */ +#define DMA_READY 0x1 /* DMA Ready */ #define FIFOFULL 0x2 /* FIFO Full */ #define FIFOEMPTY 0x4 /* FIFO Empty */ #define COMPLETE 0x8 /* DMA Complete */ diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h index 3b08cf9bd6f..9fb7bc5399a 100644 --- a/include/asm-blackfin/mach-bf548/irq.h +++ b/include/asm-blackfin/mach-bf548/irq.h @@ -338,11 +338,7 @@ Events (highest priority) EMU 0 #define GPIO_IRQ_BASE IRQ_PA0 -#ifdef CONFIG_IRQCHIP_DEMUX_GPIO #define NR_IRQS (IRQ_PJ15+1) -#else -#define NR_IRQS (SYS_IRQS+1) -#endif /* For compatibility reasons with existing code */ diff --git a/include/asm-blackfin/mach-bf548/mem_map.h b/include/asm-blackfin/mach-bf548/mem_map.h index ec1597e3183..f99f47bc3a0 100644 --- a/include/asm-blackfin/mach-bf548/mem_map.h +++ b/include/asm-blackfin/mach-bf548/mem_map.h @@ -47,6 +47,12 @@ /* Boot ROM Memory */ #define BOOT_ROM_START 0xEF000000 +#define BOOT_ROM_LENGTH 0x1000 + +/* L1 Instruction ROM */ + +#define L1_ROM_START 0xFFA14000 +#define L1_ROM_LENGTH 0x10000 /* Level 1 Memory */ @@ -87,11 +93,19 @@ #define BFIN_DSUPBANKS 0 #endif /*CONFIG_BFIN_DCACHE*/ +/* Level 2 Memory */ +#if !defined(CONFIG_BF542) +# define L2_START 0xFEB00000 +# if defined(CONFIG_BF544) +# define L2_LENGTH 0x10000 +# else +# define L2_LENGTH 0x20000 +# endif +#endif + /* Scratch Pad Memory */ -#if defined(CONFIG_BF54x) #define L1_SCRATCH_START 0xFFB00000 #define L1_SCRATCH_LENGTH 0x1000 -#endif #endif/* _MEM_MAP_548_H_ */ diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/include/asm-blackfin/mach-bf561/bf561.h index 17e1d5dcef0..3ef9e5f3613 100644 --- a/include/asm-blackfin/mach-bf561/bf561.h +++ b/include/asm-blackfin/mach-bf561/bf561.h @@ -33,25 +33,6 @@ #define SUPPORTED_REVID 0x3 #define OFFSET_(x) ((x) & 0x0000FFFF) -#define L1_ISRAM 0xFFA00000 -#define L1_ISRAM_END 0xFFA04000 -#define DATA_BANKA_SRAM 0xFF800000 -#define DATA_BANKA_SRAM_END 0xFF804000 -#define DATA_BANKB_SRAM 0xFF900000 -#define DATA_BANKB_SRAM_END 0xFF904000 -#define L1_DSRAMA 0xFF800000 -#define L1_DSRAMA_END 0xFF804000 -#define L1_DSRAMB 0xFF900000 -#define L1_DSRAMB_END 0xFF904000 -#define L2_SRAM 0xFEB00000 -#define L2_SRAM_END 0xFEB20000 -#define AMB_FLASH 0x20000000 -#define AMB_FLASH_END 0x21000000 -#define AMB_FLASH_LENGTH 0x01000000 -#define L1_ISRAM_LENGTH 0x4000 -#define L1_DSRAMA_LENGTH 0x4000 -#define L1_DSRAMB_LENGTH 0x4000 -#define L2_SRAM_LENGTH 0x20000 /*some misc defines*/ #define IMASK_IVG15 0x8000 diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h index 7945e8a3a84..c3c0eb13c81 100644 --- a/include/asm-blackfin/mach-bf561/defBF561.h +++ b/include/asm-blackfin/mach-bf561/defBF561.h @@ -55,6 +55,7 @@ /* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */ #define SWRST SICA_SWRST #define SYSCR SICA_SYSCR +#define DOUBLE_FAULT (DOUBLE_FAULT_B|DOUBLE_FAULT_A) #define RESET_DOUBLE (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A) #define RESET_WDOG (SWRST_WDT_B|SWRST_WDT_A) #define RESET_SOFTWARE (SWRST_OCCURRED) @@ -877,12 +878,14 @@ #define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ /* SWRST Mask */ -#define SYSTEM_RESET 0x00000007 /* Initiates a system software reset */ -#define SWRST_DBL_FAULT_B 0x00000800 /* SWRST Core B Double Fault */ -#define SWRST_DBL_FAULT_A 0x00001000 /* SWRST Core A Double Fault */ -#define SWRST_WDT_B 0x00002000 /* SWRST Watchdog B */ -#define SWRST_WDT_A 0x00004000 /* SWRST Watchdog A */ -#define SWRST_OCCURRED 0x00008000 /* SWRST Status */ +#define SYSTEM_RESET 0x0007 /* Initiates a system software reset */ +#define DOUBLE_FAULT_A 0x0008 /* Core A Double Fault Causes Reset */ +#define DOUBLE_FAULT_B 0x0010 /* Core B Double Fault Causes Reset */ +#define SWRST_DBL_FAULT_A 0x0800 /* SWRST Core A Double Fault */ +#define SWRST_DBL_FAULT_B 0x1000 /* SWRST Core B Double Fault */ +#define SWRST_WDT_B 0x2000 /* SWRST Watchdog B */ +#define SWRST_WDT_A 0x4000 /* SWRST Watchdog A */ +#define SWRST_OCCURRED 0x8000 /* SWRST Status */ /* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */ diff --git a/include/asm-blackfin/mach-bf561/irq.h b/include/asm-blackfin/mach-bf561/irq.h index 12789927db3..83f0383957d 100644 --- a/include/asm-blackfin/mach-bf561/irq.h +++ b/include/asm-blackfin/mach-bf561/irq.h @@ -291,11 +291,7 @@ #define GPIO_IRQ_BASE IRQ_PF0 -#ifdef CONFIG_IRQCHIP_DEMUX_GPIO #define NR_IRQS (IRQ_PF47 + 1) -#else -#define NR_IRQS SYS_IRQS -#endif #define IVG7 7 #define IVG8 8 diff --git a/include/asm-blackfin/mach-bf561/mem_map.h b/include/asm-blackfin/mach-bf561/mem_map.h index f7ac09cf2c3..c26d8486cc4 100644 --- a/include/asm-blackfin/mach-bf561/mem_map.h +++ b/include/asm-blackfin/mach-bf561/mem_map.h @@ -19,6 +19,11 @@ #define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ #define ASYNC_BANK0_SIZE 0x04000000 /* 64M */ +/* Boot ROM Memory */ + +#define BOOT_ROM_START 0xEF000000 +#define BOOT_ROM_LENGTH 0x800 + /* Level 1 Memory */ #ifdef CONFIG_BFIN_ICACHE @@ -67,9 +72,7 @@ /* Scratch Pad Memory */ -#if defined(CONFIG_BF561) #define L1_SCRATCH_START 0xFFB00000 #define L1_SCRATCH_LENGTH 0x1000 -#endif #endif /* _MEM_MAP_533_H_ */ diff --git a/include/asm-blackfin/mach-common/def_LPBlackfin.h b/include/asm-blackfin/mach-common/def_LPBlackfin.h index c1d8c4a78fc..e8967f6124f 100644 --- a/include/asm-blackfin/mach-common/def_LPBlackfin.h +++ b/include/asm-blackfin/mach-common/def_LPBlackfin.h @@ -46,7 +46,7 @@ #endif #define bfin_read8(addr) ({ \ - uint8_t __v; \ + uint32_t __v; \ __asm__ __volatile__( \ NOP_PAD_ANOMALY_05000198 \ "%0 = b[%1] (z);" \ @@ -56,7 +56,7 @@ __v; }) #define bfin_read16(addr) ({ \ - uint16_t __v; \ + uint32_t __v; \ __asm__ __volatile__( \ NOP_PAD_ANOMALY_05000198 \ "%0 = w[%1] (z);" \ @@ -80,7 +80,7 @@ NOP_PAD_ANOMALY_05000198 \ "b[%0] = %1;" \ : \ - : "a" (addr), "d" (val) \ + : "a" (addr), "d" ((uint8_t)(val)) \ : "memory" \ ) @@ -89,7 +89,7 @@ NOP_PAD_ANOMALY_05000198 \ "w[%0] = %1;" \ : \ - : "a" (addr), "d" (val) \ + : "a" (addr), "d" ((uint16_t)(val)) \ : "memory" \ ) diff --git a/include/asm-blackfin/page_offset.h b/include/asm-blackfin/page_offset.h index 3b671d5fd70..cbaff24b4b2 100644 --- a/include/asm-blackfin/page_offset.h +++ b/include/asm-blackfin/page_offset.h @@ -1,6 +1,6 @@ /* This handles the memory map.. */ -#ifdef CONFIG_BFIN +#ifdef CONFIG_BLACKFIN #define PAGE_OFFSET_RAW 0x00000000 #endif diff --git a/include/asm-blackfin/string.h b/include/asm-blackfin/string.h index e8ada91ab00..321f4d96e4a 100644 --- a/include/asm-blackfin/string.h +++ b/include/asm-blackfin/string.h @@ -1,6 +1,8 @@ #ifndef _BLACKFIN_STRING_H_ #define _BLACKFIN_STRING_H_ +#include <linux/types.h> + #ifdef __KERNEL__ /* only set these up for kernel code */ #define __HAVE_ARCH_STRCPY diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h index fe365b1b7ca..ee1cbf73a9a 100644 --- a/include/asm-blackfin/traps.h +++ b/include/asm-blackfin/traps.h @@ -48,28 +48,80 @@ #ifndef __ASSEMBLY__ -#define HWC_x2 "System MMR Error\nAn error occurred due to an invalid access to an System MMR location\nPossible reason: a 32-bit register is accessed with a 16-bit instruction,\nor a 16-bit register is accessed with a 32-bit instruction.\n" -#define HWC_x3 "External Memory Addressing Error\n" -#define HWC_x12 "Performance Monitor Overflow\n" -#define HWC_x18 "RAISE 5 instruction\n Software issued a RAISE 5 instruction to invoke the Hardware\n" -#define HWC_default "Reserved\n" - -#define EXC_0x03 "Application stack overflow\n - Please increase the stack size of the application using elf2flt -s option,\n and/or reduce the stack use of the application.\n" -#define EXC_0x10 "Single step\n - When the processor is in single step mode, every instruction\n generates an exception. Primarily used for debugging.\n" -#define EXC_0x11 "Exception caused by a trace buffer full condition\n - The processor takes this exception when the trace\n buffer overflows (only when enabled by the Trace Unit Control register).\n" -#define EXC_0x21 "Undefined instruction\n - May be used to emulate instructions that are not defined for\n a particular processor implementation.\n" -#define EXC_0x22 "Illegal instruction combination\n - See section for multi-issue rules in the ADSP-BF53x Blackfin\n Processor Instruction Set Reference.\n" -#define EXC_0x23 "Data access CPLB protection violation\n - Attempted read or write to Supervisor resource,\n or illegal data memory access. \n" -#define EXC_0x24 "Data access misaligned address violation\n - Attempted misaligned data memory or data cache access.\n" -#define EXC_0x25 "Unrecoverable event\n - For example, an exception generated while processing a previous exception.\n" -#define EXC_0x26 "Data access CPLB miss\n - Used by the MMU to signal a CPLB miss on a data access.\n" -#define EXC_0x27 "Data access multiple CPLB hits\n - More than one CPLB entry matches data fetch address.\n" -#define EXC_0x28 "Program Sequencer Exception caused by an emulation watchpoint match\n - There is a watchpoint match, and one of the EMUSW\n bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n" -#define EXC_0x2A "Instruction fetch misaligned address violation\n - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch exception,\n the return address provided in RETX is the destination address which is misaligned, rather than the address of the offending instruction.\n" -#define EXC_0x2B "CPLB protection violation\n - Illegal instruction fetch access (memory protection violation).\n" -#define EXC_0x2C "Instruction fetch CPLB miss\n - CPLB miss on an instruction fetch.\n" -#define EXC_0x2D "Instruction fetch multiple CPLB hits\n - More than one CPLB entry matches instruction fetch address.\n" -#define EXC_0x2E "Illegal use of supervisor resource\n - Attempted to use a Supervisor register or instruction from User mode.\n Supervisor resources are registers and instructions that are reserved\n for Supervisor use: Supervisor only registers, all MMRs, and Supervisor\n only instructions.\n" +#define HWC_x2(level) \ + "System MMR Error\n" \ + level " - An error occurred due to an invalid access to an System MMR location\n" \ + level " Possible reason: a 32-bit register is accessed with a 16-bit instruction\n" \ + level " or a 16-bit register is accessed with a 32-bit instruction.\n" +#define HWC_x3(level) \ + "External Memory Addressing Error\n" +#define HWC_x12(level) \ + "Performance Monitor Overflow\n" +#define HWC_x18(level) \ + "RAISE 5 instruction\n" \ + level " Software issued a RAISE 5 instruction to invoke the Hardware\n" +#define HWC_default(level) \ + "Reserved\n" +#define EXC_0x03(level) \ + "Application stack overflow\n" \ + level " - Please increase the stack size of the application using elf2flt -s option,\n" \ + level " and/or reduce the stack use of the application.\n" +#define EXC_0x10(level) \ + "Single step\n" \ + level " - When the processor is in single step mode, every instruction\n" \ + level " generates an exception. Primarily used for debugging.\n" +#define EXC_0x11(level) \ + "Exception caused by a trace buffer full condition\n" \ + level " - The processor takes this exception when the trace\n" \ + level " buffer overflows (only when enabled by the Trace Unit Control register).\n" +#define EXC_0x21(level) \ + "Undefined instruction\n" \ + level " - May be used to emulate instructions that are not defined for\n" \ + level " a particular processor implementation.\n" +#define EXC_0x22(level) \ + "Illegal instruction combination\n" \ + level " - See section for multi-issue rules in the ADSP-BF53x Blackfin\n" \ + level " Processor Instruction Set Reference.\n" +#define EXC_0x23(level) \ + "Data access CPLB protection violation\n" \ + level " - Attempted read or write to Supervisor resource,\n" \ + level " or illegal data memory access. \n" +#define EXC_0x24(level) \ + "Data access misaligned address violation\n" \ + level " - Attempted misaligned data memory or data cache access.\n" +#define EXC_0x25(level) \ + "Unrecoverable event\n" \ + level " - For example, an exception generated while processing a previous exception.\n" +#define EXC_0x26(level) \ + "Data access CPLB miss\n" \ + level " - Used by the MMU to signal a CPLB miss on a data access.\n" +#define EXC_0x27(level) \ + "Data access multiple CPLB hits\n" \ + level " - More than one CPLB entry matches data fetch address.\n" +#define EXC_0x28(level) \ + "Program Sequencer Exception caused by an emulation watchpoint match\n" \ + level " - There is a watchpoint match, and one of the EMUSW\n" \ + level " bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n" +#define EXC_0x2A(level) \ + "Instruction fetch misaligned address violation\n" \ + level " - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch\n" \ + level " exception, the return address provided in RETX is the destination address which is\n" \ + level " misaligned, rather than the address of the offending instruction.\n" +#define EXC_0x2B(level) \ + "CPLB protection violation\n" \ + level " - Illegal instruction fetch access (memory protection violation).\n" +#define EXC_0x2C(level) \ + "Instruction fetch CPLB miss\n" \ + level " - CPLB miss on an instruction fetch.\n" +#define EXC_0x2D(level) \ + "Instruction fetch multiple CPLB hits\n" \ + level " - More than one CPLB entry matches instruction fetch address.\n" +#define EXC_0x2E(level) \ + "Illegal use of supervisor resource\n" \ + level " - Attempted to use a Supervisor register or instruction from User mode.\n" \ + level " Supervisor resources are registers and instructions that are reserved\n" \ + level " for Supervisor use: Supervisor only registers, all MMRs, and Supervisor\n" \ + level " only instructions.\n" #endif /* __ASSEMBLY__ */ #endif /* _BFIN_TRAPS_H */ diff --git a/init/Kconfig b/init/Kconfig index c5b354b1409..d35e44f4dd6 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -438,7 +438,7 @@ menuconfig EMBEDDED config UID16 bool "Enable 16-bit UID system calls" if EMBEDDED - depends on ARM || BFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION) + depends on ARM || BLACKFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION) default y help This enables the legacy 16-bit UID syscall wrappers. diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 1e5f207b907..a60109307d3 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -359,7 +359,7 @@ config DEBUG_HIGHMEM config DEBUG_BUGVERBOSE bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EMBEDDED depends on BUG - depends on ARM || AVR32 || M32R || M68K || SPARC32 || SPARC64 || FRV || SUPERH || GENERIC_BUG || BFIN + depends on ARM || AVR32 || M32R || M68K || SPARC32 || SPARC64 || FRV || SUPERH || GENERIC_BUG || BLACKFIN default !EMBEDDED help Say Y here to make BUG() panics output the file name and line number @@ -409,7 +409,7 @@ config DEBUG_SG config FRAME_POINTER bool "Compile the kernel with frame pointers" - depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || AVR32 || SUPERH || BFIN) + depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || AVR32 || SUPERH || BLACKFIN) default y if DEBUG_INFO && UML help If you say Y here the resulting kernel image will be slightly larger |