summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/kernel-parameters.txt9
-rw-r--r--MAINTAINERS12
-rw-r--r--arch/frv/mb93090-mb00/pci-frv.c30
-rw-r--r--arch/m68knommu/kernel/comempci.c9
-rw-r--r--arch/mips/pmc-sierra/yosemite/ht.c36
-rw-r--r--arch/sh/drivers/pci/pci.c32
-rw-r--r--arch/sparc64/kernel/pci.c2
-rw-r--r--arch/x86/kernel/acpi/sleep.c2
-rw-r--r--arch/x86/kernel/apm_32.c8
-rw-r--r--arch/x86/kernel/early-quirks.c26
-rw-r--r--arch/x86/kernel/setup.c5
-rw-r--r--arch/x86/pci/common.c30
-rw-r--r--arch/x86/pci/early.c60
-rw-r--r--arch/x86/pci/irq.c120
-rw-r--r--arch/x86/pci/pci.h1
-rw-r--r--drivers/acpi/Kconfig9
-rw-r--r--drivers/acpi/Makefile1
-rw-r--r--drivers/acpi/bus.c22
-rw-r--r--drivers/acpi/glue.c2
-rw-r--r--drivers/acpi/pci_slot.c368
-rw-r--r--drivers/acpi/power.c138
-rw-r--r--drivers/acpi/scan.c42
-rw-r--r--drivers/acpi/sleep/main.c301
-rw-r--r--drivers/acpi/sleep/wakeup.c13
-rw-r--r--drivers/base/platform.c296
-rw-r--r--drivers/base/power/main.c675
-rw-r--r--drivers/base/power/power.h2
-rw-r--r--drivers/base/power/sysfs.c3
-rw-r--r--drivers/base/power/trace.c4
-rw-r--r--drivers/pci/Makefile2
-rw-r--r--drivers/pci/hotplug/acpi_pcihp.c85
-rw-r--r--drivers/pci/hotplug/acpiphp.h1
-rw-r--r--drivers/pci/hotplug/acpiphp_core.c25
-rw-r--r--drivers/pci/hotplug/acpiphp_glue.c23
-rw-r--r--drivers/pci/hotplug/acpiphp_ibm.c6
-rw-r--r--drivers/pci/hotplug/cpci_hotplug_core.c2
-rw-r--r--drivers/pci/hotplug/cpqphp_core.c4
-rw-r--r--drivers/pci/hotplug/fakephp.c86
-rw-r--r--drivers/pci/hotplug/ibmphp_ebda.c3
-rw-r--r--drivers/pci/hotplug/pci_hotplug_core.c284
-rw-r--r--drivers/pci/hotplug/pciehp.h16
-rw-r--r--drivers/pci/hotplug/pciehp_core.c127
-rw-r--r--drivers/pci/hotplug/pciehp_hpc.c318
-rw-r--r--drivers/pci/hotplug/rpadlpar_sysfs.c5
-rw-r--r--drivers/pci/hotplug/rpaphp_slot.c44
-rw-r--r--drivers/pci/hotplug/sgi_hotplug.c12
-rw-r--r--drivers/pci/hotplug/shpchp.h14
-rw-r--r--drivers/pci/hotplug/shpchp_core.c37
-rw-r--r--drivers/pci/hotplug/shpchp_hpc.c1
-rw-r--r--drivers/pci/intel-iommu.c1
-rw-r--r--drivers/pci/msi.c22
-rw-r--r--drivers/pci/pci-acpi.c271
-rw-r--r--drivers/pci/pci-driver.c388
-rw-r--r--drivers/pci/pci.c479
-rw-r--r--drivers/pci/pci.h47
-rw-r--r--drivers/pci/pcie/aer/aerdrv.c9
-rw-r--r--drivers/pci/pcie/aer/aerdrv_acpi.c8
-rw-r--r--drivers/pci/pcie/aer/aerdrv_core.c24
-rw-r--r--drivers/pci/pcie/portdrv_bus.c1
-rw-r--r--drivers/pci/pcie/portdrv_core.c22
-rw-r--r--drivers/pci/pcie/portdrv_pci.c5
-rw-r--r--drivers/pci/probe.c38
-rw-r--r--drivers/pci/proc.c4
-rw-r--r--drivers/pci/quirks.c134
-rw-r--r--drivers/pci/setup-bus.c43
-rw-r--r--drivers/pci/setup-irq.c3
-rw-r--r--drivers/pci/setup-res.c70
-rw-r--r--drivers/pci/slot.c233
-rw-r--r--include/acpi/acpi_bus.h8
-rw-r--r--include/acpi/acpi_drivers.h4
-rw-r--r--include/asm-generic/vmlinux.lds.h6
-rw-r--r--include/asm-x86/pci-direct.h4
-rw-r--r--include/linux/acpi.h3
-rw-r--r--include/linux/device.h9
-rw-r--r--include/linux/pci.h57
-rw-r--r--include/linux/pci_hotplug.h14
-rw-r--r--include/linux/pci_regs.h1
-rw-r--r--include/linux/platform_device.h1
-rw-r--r--include/linux/pm.h314
-rw-r--r--include/linux/pm_wakeup.h28
-rw-r--r--include/linux/suspend.h14
-rw-r--r--kernel/power/disk.c50
-rw-r--r--kernel/power/main.c16
-rw-r--r--lib/kobject.c1
84 files changed, 3966 insertions, 1719 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5e497d16fb5..09ad7450647 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -147,10 +147,14 @@ and is between 256 and 4096 characters. It is defined in the file
default: 0
acpi_sleep= [HW,ACPI] Sleep options
- Format: { s3_bios, s3_mode, s3_beep }
+ Format: { s3_bios, s3_mode, s3_beep, old_ordering }
See Documentation/power/video.txt for s3_bios and s3_mode.
s3_beep is for debugging; it makes the PC's speaker beep
as soon as the kernel's real-mode entry point is called.
+ old_ordering causes the ACPI 1.0 ordering of the _PTS
+ control method, wrt putting devices into low power
+ states, to be enforced (the ACPI 2.0 ordering of _PTS is
+ used by default).
acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
Format: { level | edge | high | low }
@@ -1537,6 +1541,9 @@ and is between 256 and 4096 characters. It is defined in the file
Use with caution as certain devices share
address decoders between ROMs and other
resources.
+ norom [X86-32,X86_64] Do not assign address space to
+ expansion ROMs that do not already have
+ BIOS assigned address ranges.
irqmask=0xMMMM [X86-32] Set a bit mask of IRQs allowed to be
assigned automatically to PCI devices. You can
make the kernel exclude IRQs of your ISA cards
diff --git a/MAINTAINERS b/MAINTAINERS
index 2b9212f9044..93fd6b2efee 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -248,7 +248,7 @@ S: Supported
ACPI PCI HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
-L: pcihpd-discuss@lists.sourceforge.net
+L: linux-pci@vger.kernel.org
S: Supported
ACPI THERMAL DRIVER
@@ -1145,21 +1145,21 @@ COMPACTPCI HOTPLUG CORE
P: Scott Murray
M: scottm@somanetworks.com
M: scott@spiteful.org
-L: pcihpd-discuss@lists.sourceforge.net
+L: linux-pci@vger.kernel.org
S: Supported
COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER
P: Scott Murray
M: scottm@somanetworks.com
M: scott@spiteful.org
-L: pcihpd-discuss@lists.sourceforge.net
+L: linux-pci@vger.kernel.org
S: Supported
COMPACTPCI HOTPLUG GENERIC DRIVER
P: Scott Murray
M: scottm@somanetworks.com
M: scott@spiteful.org
-L: pcihpd-discuss@lists.sourceforge.net
+L: linux-pci@vger.kernel.org
S: Supported
COMPAL LAPTOP SUPPORT
@@ -3219,7 +3219,7 @@ S: Supported
PCIE HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
-L: pcihpd-discuss@lists.sourceforge.net
+L: linux-pci@vger.kernel.org
S: Supported
PCMCIA SUBSYSTEM
@@ -3865,7 +3865,7 @@ S: Maintained
SHPC HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
-L: pcihpd-discuss@lists.sourceforge.net
+L: linux-pci@vger.kernel.org
S: Supported
SECURE DIGITAL HOST CONTROLLER INTERFACE DRIVER
diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
index 4f165c93be4..edae117fcc2 100644
--- a/arch/frv/mb93090-mb00/pci-frv.c
+++ b/arch/frv/mb93090-mb00/pci-frv.c
@@ -19,36 +19,6 @@
#include "pci-frv.h"
-#if 0
-void
-pcibios_update_resource(struct pci_dev *dev, struct resource *root,
- struct resource *res, int resource)
-{
- u32 new, check;
- int reg;
-
- new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
- if (resource < 6) {
- reg = PCI_BASE_ADDRESS_0 + 4*resource;
- } else if (resource == PCI_ROM_RESOURCE) {
- res->flags |= IORESOURCE_ROM_ENABLE;
- new |= PCI_ROM_ADDRESS_ENABLE;
- reg = dev->rom_base_reg;
- } else {
- /* Somebody might have asked allocation of a non-standard resource */
- return;
- }
-
- pci_write_config_dword(dev, reg, new);
- pci_read_config_dword(dev, reg, &check);
- if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
- printk(KERN_ERR "PCI: Error while updating region "
- "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
- new, check);
- }
-}
-#endif
-
/*
* We need to avoid collisions with `mirrored' VGA ports
* and other strange ISA hardware, so we always want the
diff --git a/arch/m68knommu/kernel/comempci.c b/arch/m68knommu/kernel/comempci.c
index 6ee00effbad..0a68b5a85f8 100644
--- a/arch/m68knommu/kernel/comempci.c
+++ b/arch/m68knommu/kernel/comempci.c
@@ -375,15 +375,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
/*****************************************************************************/
-void pcibios_update_resource(struct pci_dev *dev, struct resource *root, struct resource *r, int resource)
-{
- printk(KERN_WARNING "%s(%d): no support for changing PCI resources...\n",
- __FILE__, __LINE__);
-}
-
-
-/*****************************************************************************/
-
/*
* Local routines to interrcept the standard I/O and vector handling
* code. Don't include this 'till now - initialization code above needs
diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c
index 6380662bbf3..678388fd34b 100644
--- a/arch/mips/pmc-sierra/yosemite/ht.c
+++ b/arch/mips/pmc-sierra/yosemite/ht.c
@@ -345,42 +345,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
return pcibios_enable_resources(dev);
}
-
-
-void pcibios_update_resource(struct pci_dev *dev, struct resource *root,
- struct resource *res, int resource)
-{
- u32 new, check;
- int reg;
-
- return;
-
- new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
- if (resource < 6) {
- reg = PCI_BASE_ADDRESS_0 + 4 * resource;
- } else if (resource == PCI_ROM_RESOURCE) {
- res->flags |= IORESOURCE_ROM_ENABLE;
- reg = dev->rom_base_reg;
- } else {
- /*
- * Somebody might have asked allocation of a non-standard
- * resource
- */
- return;
- }
-
- pci_write_config_dword(dev, reg, new);
- pci_read_config_dword(dev, reg, &check);
- if ((new ^ check) &
- ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK :
- PCI_BASE_ADDRESS_MEM_MASK)) {
- printk(KERN_ERR "PCI: Error while updating region "
- "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
- new, check);
- }
-}
-
-
void pcibios_align_resource(void *data, struct resource *res,
resource_size_t size, resource_size_t align)
{
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 08d2e732525..f57095a2617 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -76,38 +76,6 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus)
pci_read_bridge_bases(bus);
}
-void
-pcibios_update_resource(struct pci_dev *dev, struct resource *root,
- struct resource *res, int resource)
-{
- u32 new, check;
- int reg;
-
- new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
- if (resource < 6) {
- reg = PCI_BASE_ADDRESS_0 + 4*resource;
- } else if (resource == PCI_ROM_RESOURCE) {
- res->flags |= IORESOURCE_ROM_ENABLE;
- new |= PCI_ROM_ADDRESS_ENABLE;
- reg = dev->rom_base_reg;
- } else {
- /*
- * Somebody might have asked allocation of a non-standard
- * resource
- */
- return;
- }
-
- pci_write_config_dword(dev, reg, new);
- pci_read_config_dword(dev, reg, &check);
- if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ?
- PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
- printk(KERN_ERR "PCI: Error while updating region "
- "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
- new, check);
- }
-}
-
void pcibios_align_resource(void *data, struct resource *res,
resource_size_t size, resource_size_t align)
__attribute__ ((weak));
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index 112b09f16f3..d00a3656c28 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -408,7 +408,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
dev->class = class >> 8;
dev->revision = class & 0xff;
- sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+ sprintf(dev->dev.bus_id, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
if (ofpci_verbose)
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 793ad2045f5..868de3d5c39 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -158,6 +158,8 @@ static int __init acpi_sleep_setup(char *str)
acpi_realmode_flags |= 2;
if (strncmp(str, "s3_beep", 7) == 0)
acpi_realmode_flags |= 4;
+ if (strncmp(str, "old_ordering", 12) == 0)
+ acpi_old_suspend_ordering();
str = strchr(str, ',');
if (str != NULL)
str += strspn(str, ", \t");
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 75cb5da4ea0..bf9b441331e 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -1213,9 +1213,9 @@ static int suspend(int vetoable)
if (err != APM_SUCCESS)
apm_error("suspend", err);
err = (err == APM_SUCCESS) ? 0 : -EIO;
- device_power_up();
+ device_power_up(PMSG_RESUME);
local_irq_enable();
- device_resume();
+ device_resume(PMSG_RESUME);
queue_event(APM_NORMAL_RESUME, NULL);
spin_lock(&user_list_lock);
for (as = user_list; as != NULL; as = as->next) {
@@ -1240,7 +1240,7 @@ static void standby(void)
apm_error("standby", err);
local_irq_disable();
- device_power_up();
+ device_power_up(PMSG_RESUME);
local_irq_enable();
}
@@ -1326,7 +1326,7 @@ static void check_events(void)
ignore_bounce = 1;
if ((event != APM_NORMAL_RESUME)
|| (ignore_normal_resume == 0)) {
- device_resume();
+ device_resume(PMSG_RESUME);
queue_event(event, NULL);
}
ignore_normal_resume = 0;
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index a4665f37cfc..a0e11c0cc87 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -120,7 +120,18 @@ static struct chipset early_qrk[] __initdata = {
{}
};
-static void __init check_dev_quirk(int num, int slot, int func)
+/**
+ * check_dev_quirk - apply early quirks to a given PCI device
+ * @num: bus number
+ * @slot: slot number
+ * @func: PCI function
+ *
+ * Check the vendor & device ID against the early quirks table.
+ *
+ * If the device is single function, let early_quirks() know so we don't
+ * poke at this device again.
+ */
+static int __init check_dev_quirk(int num, int slot, int func)
{
u16 class;
u16 vendor;
@@ -131,7 +142,7 @@ static void __init check_dev_quirk(int num, int slot, int func)
class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
if (class == 0xffff)
- return;
+ return -1; /* no class, treat as single function */
vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID);
@@ -154,7 +165,9 @@ static void __init check_dev_quirk(int num, int slot, int func)
type = read_pci_config_byte(num, slot, func,
PCI_HEADER_TYPE);
if (!(type & 0x80))
- return;
+ return -1;
+
+ return 0;
}
void __init early_quirks(void)
@@ -167,6 +180,9 @@ void __init early_quirks(void)
/* Poor man's PCI discovery */
for (num = 0; num < 32; num++)
for (slot = 0; slot < 32; slot++)
- for (func = 0; func < 8; func++)
- check_dev_quirk(num, slot, func);
+ for (func = 0; func < 8; func++) {
+ /* Only probe function 0 on single fn devices */
+ if (check_dev_quirk(num, slot, func))
+ break;
+ }
}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 36c540d4ac4..531b55b8e81 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -684,6 +684,11 @@ void __init setup_arch(char **cmdline_p)
clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
}
+#ifdef CONFIG_PCI
+ if (pci_early_dump_regs)
+ early_dump_pci_devices();
+#endif
+
finish_e820_parsing();
#ifdef CONFIG_X86_32
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 20b9f59f95d..b67732bbb85 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -20,6 +20,7 @@
unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
PCI_PROBE_MMCONF;
+unsigned int pci_early_dump_regs;
static int pci_bf_sort;
int pci_routeirq;
int pcibios_last_bus = -1;
@@ -31,7 +32,7 @@ struct pci_raw_ops *raw_pci_ext_ops;
int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 *val)
{
- if (reg < 256 && raw_pci_ops)
+ if (domain == 0 && reg < 256 && raw_pci_ops)
return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
if (raw_pci_ext_ops)
return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
@@ -41,7 +42,7 @@ int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 val)
{
- if (reg < 256 && raw_pci_ops)
+ if (domain == 0 && reg < 256 && raw_pci_ops)
return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
if (raw_pci_ext_ops)
return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
@@ -121,6 +122,21 @@ void __init dmi_check_skip_isa_align(void)
dmi_check_system(can_skip_pciprobe_dmi_table);
}
+static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
+{
+ struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
+
+ if (pci_probe & PCI_NOASSIGN_ROMS) {
+ if (rom_r->parent)
+ return;
+ if (rom_r->start) {
+ /* we deal with BIOS assigned ROM later */
+ return;
+ }
+ rom_r->start = rom_r->end = rom_r->flags = 0;
+ }
+}
+
/*
* Called after each bus is probed, but before its children
* are examined.
@@ -128,7 +144,11 @@ void __init dmi_check_skip_isa_align(void)
void __devinit pcibios_fixup_bus(struct pci_bus *b)
{
+ struct pci_dev *dev;
+
pci_read_bridge_bases(b);
+ list_for_each_entry(dev, &b->devices, bus_list)
+ pcibios_fixup_device_resources(dev);
}
/*
@@ -481,12 +501,18 @@ char * __devinit pcibios_setup(char *str)
else if (!strcmp(str, "rom")) {
pci_probe |= PCI_ASSIGN_ROMS;
return NULL;
+ } else if (!strcmp(str, "norom")) {
+ pci_probe |= PCI_NOASSIGN_ROMS;
+ return NULL;
} else if (!strcmp(str, "assign-busses")) {
pci_probe |= PCI_ASSIGN_ALL_BUSSES;
return NULL;
} else if (!strcmp(str, "use_crs")) {
pci_probe |= PCI_USE__CRS;
return NULL;
+ } else if (!strcmp(str, "earlydump")) {
+ pci_early_dump_regs = 1;
+ return NULL;
} else if (!strcmp(str, "routeirq")) {
pci_routeirq = 1;
return NULL;
diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c
index 42df4b6606d..858dbe3399f 100644
--- a/arch/x86/pci/early.c
+++ b/arch/x86/pci/early.c
@@ -49,7 +49,14 @@ void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val)
{
PDprintk("%x writing to %x: %x\n", slot, offset, val);
outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
- outb(val, 0xcfc);
+ outb(val, 0xcfc + (offset&3));
+}
+
+void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val)
+{
+ PDprintk("%x writing to %x: %x\n", slot, offset, val);
+ outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
+ outw(val, 0xcfc + (offset&2));
}
int early_pci_allowed(void)
@@ -57,3 +64,54 @@ int early_pci_allowed(void)
return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) ==
PCI_PROBE_CONF1;
}
+
+void early_dump_pci_device(u8 bus, u8 slot, u8 func)
+{
+ int i;
+ int j;
+ u32 val;
+
+ printk("PCI: %02x:%02x:%02x", bus, slot, func);
+
+ for (i = 0; i < 256; i += 4) {
+ if (!(i & 0x0f))
+ printk("\n%04x:",i);
+
+ val = read_pci_config(bus, slot, func, i);
+ for (j = 0; j < 4; j++) {
+ printk(" %02x", val & 0xff);
+ val >>= 8;
+ }
+ }
+ printk("\n");
+}
+
+void early_dump_pci_devices(void)
+{
+ unsigned bus, slot, func;
+
+ if (!early_pci_allowed())
+ return;
+
+ for (bus = 0; bus < 256; bus++) {
+ for (slot = 0; slot < 32; slot++) {
+ for (func = 0; func < 8; func++) {
+ u32 class;
+ u8 type;
+ class = read_pci_config(bus, slot, func,
+ PCI_CLASS_REVISION);
+ if (class == 0xffffffff)
+ break;
+
+ early_dump_pci_device(bus, slot, func);
+
+ /* No multi-function device? */
+ type = read_pci_config_byte(bus, slot, func,
+ PCI_HEADER_TYPE);
+ if (!(type & 0x80))
+ break;
+ }
+ }
+ }
+}
+
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index dc568c6b83f..6a06a2eb059 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -45,7 +45,8 @@ struct irq_router {
char *name;
u16 vendor, device;
int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq);
- int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, int new);
+ int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq,
+ int new);
};
struct irq_router_handler {
@@ -77,7 +78,8 @@ static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr)
for (i = 0; i < rt->size; i++)
sum += addr[i];
if (!sum) {
- DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt);
+ DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n",
+ rt);
return rt;
}
return NULL;
@@ -183,7 +185,8 @@ static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset,
return (nr & 1) ? (x >> 4) : (x & 0xf);
}
-static void write_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr, unsigned int val)
+static void write_config_nybble(struct pci_dev *router, unsigned offset,
+ unsigned nr, unsigned int val)
{
u8 x;
unsigned reg = offset + (nr >> 1);
@@ -467,7 +470,8 @@ static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int
return inb(0xc01) & 0xf;
}
-static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev,
+ int pirq, int irq)
{
outb(pirq, 0xc00);
outb(irq, 0xc01);
@@ -660,7 +664,8 @@ static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router
}
-static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int serverworks_router_probe(struct irq_router *r,
+ struct pci_dev *router, u16 device)
{
switch (device) {
case PCI_DEVICE_ID_SERVERWORKS_OSB4:
@@ -827,10 +832,12 @@ static void __init pirq_find_router(struct irq_router *r)
for (h = pirq_routers; h->vendor; h++) {
/* First look for a router match */
- if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device))
+ if (rt->rtr_vendor == h->vendor &&
+ h->probe(r, pirq_router_dev, rt->rtr_device))
break;
/* Fall back to a device match */
- if (pirq_router_dev->vendor == h->vendor && h->probe(r, pirq_router_dev, pirq_router_dev->device))
+ if (pirq_router_dev->vendor == h->vendor &&
+ h->probe(r, pirq_router_dev, pirq_router_dev->device))
break;
}
printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
@@ -845,11 +852,13 @@ static void __init pirq_find_router(struct irq_router *r)
static struct irq_info *pirq_get_info(struct pci_dev *dev)
{
struct irq_routing_table *rt = pirq_table;
- int entries = (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
+ int entries = (rt->size - sizeof(struct irq_routing_table)) /
+ sizeof(struct irq_info);
struct irq_info *info;
for (info = rt->slots; entries--; info++)
- if (info->bus == dev->bus->number && PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
+ if (info->bus == dev->bus->number &&
+ PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
return info;
return NULL;
}
@@ -890,7 +899,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
DBG(" -> not routed\n" KERN_DEBUG);
return 0;
}
- DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, pirq_table->exclusive_irqs);
+ DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask,
+ pirq_table->exclusive_irqs);
mask &= pcibios_irq_mask;
/* Work around broken HP Pavilion Notebooks which assign USB to
@@ -903,7 +913,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
}
/* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */
- if (acer_tm360_irqrouting && dev->irq == 11 && dev->vendor == PCI_VENDOR_ID_O2) {
+ if (acer_tm360_irqrouting && dev->irq == 11 &&
+ dev->vendor == PCI_VENDOR_ID_O2) {
pirq = 0x68;
mask = 0x400;
dev->irq = r->get(pirq_router_dev, dev, pirq);
@@ -920,15 +931,16 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
newirq = 0;
else
printk("\n" KERN_WARNING
- "PCI: IRQ %i for device %s doesn't match PIRQ mask "
- "- try pci=usepirqmask\n" KERN_DEBUG, newirq,
- pci_name(dev));
+ "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n"
+ KERN_DEBUG, newirq,
+ pci_name(dev));
}
if (!newirq && assign) {
for (i = 0; i < 16; i++) {
if (!(mask & (1 << i)))
continue;
- if (pirq_penalty[i] < pirq_penalty[newirq] && can_request_irq(i, IRQF_SHARED))
+ if (pirq_penalty[i] < pirq_penalty[newirq] &&
+ can_request_irq(i, IRQF_SHARED))
newirq = i;
}
}
@@ -944,7 +956,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
DBG(" -> got IRQ %d\n", irq);
msg = "Found";
eisa_set_level_irq(irq);
- } else if (newirq && r->set && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
+ } else if (newirq && r->set &&
+ (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
DBG(" -> assigning IRQ %d", newirq);
if (r->set(pirq_router_dev, dev, pirq, newirq)) {
eisa_set_level_irq(newirq);
@@ -962,7 +975,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
} else
return 0;
}
- printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, pci_name(dev));
+ printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq,
+ pci_name(dev));
/* Update IRQ for all devices with the same pirq value */
while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -974,7 +988,10 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
if (!info)
continue;
if (info->irq[pin].link == pirq) {
- /* We refuse to override the dev->irq information. Give a warning! */
+ /*
+ * We refuse to override the dev->irq
+ * information. Give a warning!
+ */
if (dev2->irq && dev2->irq != irq && \
(!(pci_probe & PCI_USE_PIRQ_MASK) || \
((1 << dev2->irq) & mask))) {
@@ -987,7 +1004,9 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
dev2->irq = irq;
pirq_penalty[irq]++;
if (dev != dev2)
- printk(KERN_INFO "PCI: Sharing IRQ %d with %s\n", irq, pci_name(dev2));
+ printk(KERN_INFO
+ "PCI: Sharing IRQ %d with %s\n",
+ irq, pci_name(dev2));
}
}
return 1;
@@ -1001,15 +1020,21 @@ static void __init pcibios_fixup_irqs(void)
DBG(KERN_DEBUG "PCI: IRQ fixup\n");
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
/*
- * If the BIOS has set an out of range IRQ number, just ignore it.
- * Also keep track of which IRQ's are already in use.
+ * If the BIOS has set an out of range IRQ number, just
+ * ignore it. Also keep track of which IRQ's are
+ * already in use.
*/
if (dev->irq >= 16) {
- DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq);
+ DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n",
+ pci_name(dev), dev->irq);
dev->irq = 0;
}
- /* If the IRQ is already assigned to a PCI device, ignore its ISA use penalty */
- if (pirq_penalty[dev->irq] >= 100 && pirq_penalty[dev->irq] < 100000)
+ /*
+ * If the IRQ is already assigned to a PCI device,
+ * ignore its ISA use penalty
+ */
+ if (pirq_penalty[dev->irq] >= 100 &&
+ pirq_penalty[dev->irq] < 100000)
pirq_penalty[dev->irq] = 0;
pirq_penalty[dev->irq]++;
}
@@ -1025,8 +1050,13 @@ static void __init pcibios_fixup_irqs(void)
int irq;
if (pin) {
- pin--; /* interrupt pins are numbered starting from 1 */
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin);
+ /*
+ * interrupt pins are numbered starting
+ * from 1
+ */
+ pin--;
+ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+ PCI_SLOT(dev->devfn), pin);
/*
* Busses behind bridges are typically not listed in the MP-table.
* In this case we have to look up the IRQ based on the parent bus,
@@ -1067,7 +1097,8 @@ static int __init fix_broken_hp_bios_irq9(const struct dmi_system_id *d)
{
if (!broken_hp_bios_irq9) {
broken_hp_bios_irq9 = 1;
- printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
+ printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
+ d->ident);
}
return 0;
}
@@ -1080,7 +1111,8 @@ static int __init fix_acer_tm360_irqrouting(const struct dmi_system_id *d)
{
if (!acer_tm360_irqrouting) {
acer_tm360_irqrouting = 1;
- printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
+ printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
+ d->ident);
}
return 0;
}
@@ -1092,7 +1124,8 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = {
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook Model GE"),
+ DMI_MATCH(DMI_PRODUCT_VERSION,
+ "HP Pavilion Notebook Model GE"),
DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
},
},
@@ -1131,7 +1164,10 @@ int __init pcibios_irq_init(void)
if (!(pirq_table->exclusive_irqs & (1 << i)))
pirq_penalty[i] += 100;
}
- /* If we're using the I/O APIC, avoid using the PCI IRQ routing table */
+ /*
+ * If we're using the I/O APIC, avoid using the PCI IRQ
+ * routing table
+ */
if (io_apic_assign_pci_irqs)
pirq_table = NULL;
}
@@ -1175,7 +1211,7 @@ static int pirq_enable_irq(struct pci_dev *dev)
if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
char *msg = "";
- pin--; /* interrupt pins are numbered starting from 1 */
+ pin--; /* interrupt pins are numbered starting from 1 */
if (io_apic_assign_pci_irqs) {
int irq;
@@ -1195,13 +1231,16 @@ static int pirq_enable_irq(struct pci_dev *dev)
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn), pin);
if (irq >= 0)
- printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
- pci_name(bridge), 'A' + pin, irq);
+ printk(KERN_WARNING
+ "PCI: using PPB %s[%c] to get irq %d\n",
+ pci_name(bridge),
+ 'A' + pin, irq);
dev = bridge;
}
dev = temp_dev;
if (irq >= 0) {
- printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
+ printk(KERN_INFO
+ "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
pci_name(dev), 'A' + pin, irq);
dev->irq = irq;
return 0;
@@ -1212,12 +1251,17 @@ static int pirq_enable_irq(struct pci_dev *dev)
else
msg = " Please try using pci=biosirq.";
- /* With IDE legacy devices the IRQ lookup failure is not a problem.. */
- if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && !(dev->class & 0x5))
+ /*
+ * With IDE legacy devices the IRQ lookup failure is not
+ * a problem..
+ */
+ if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE &&
+ !(dev->class & 0x5))
return 0;
- printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
- 'A' + pin, pci_name(dev), msg);
+ printk(KERN_WARNING
+ "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
+ 'A' + pin, pci_name(dev), msg);
}
return 0;
}
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index b2270a55b0c..3e25deb821a 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -28,6 +28,7 @@
#define PCI_USE__CRS 0x10000
#define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000
#define PCI_HAS_IO_ECS 0x40000
+#define PCI_NOASSIGN_ROMS 0x80000
extern unsigned int pci_probe;
extern unsigned long pirq_table_addr;
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index bba867391a8..735f5ea1747 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -336,6 +336,15 @@ config ACPI_EC
the battery and thermal drivers. If you are compiling for a
mobile system, say Y.
+config ACPI_PCI_SLOT
+ tristate "PCI slot detection driver"
+ default n
+ help
+ This driver will attempt to discover all PCI slots in your system,
+ and creates entries in /sys/bus/pci/slots/. This feature can
+ help you correlate PCI bus addresses with the physical geography
+ of your slots. If you are unsure, say N.
+
config ACPI_POWER
bool
default y
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 4efbe598c81..52a4cd4b81d 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_ACPI_DOCK) += dock.o
obj-$(CONFIG_ACPI_BAY) += bay.o
obj-$(CONFIG_ACPI_VIDEO) += video.o
obj-y += pci_root.o pci_link.o pci_irq.o pci_bind.o
+obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o
obj-$(CONFIG_ACPI_POWER) += power.o
obj-$(CONFIG_ACPI_PROCESSOR) += processor.o
obj-$(CONFIG_ACPI_CONTAINER) += container.o
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index afb34387d5f..ccae305ee55 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -295,6 +295,28 @@ int acpi_bus_set_power(acpi_handle handle, int state)
EXPORT_SYMBOL(acpi_bus_set_power);
+bool acpi_bus_power_manageable(acpi_handle handle)
+{
+ struct acpi_device *device;
+ int result;
+
+ result = acpi_bus_get_device(handle, &device);
+ return result ? false : device->flags.power_manageable;
+}
+
+EXPORT_SYMBOL(acpi_bus_power_manageable);
+
+bool acpi_bus_can_wakeup(acpi_handle handle)
+{
+ struct acpi_device *device;
+ int result;
+
+ result = acpi_bus_get_device(handle, &device);
+ return result ? false : device->wakeup.flags.valid;
+}
+
+EXPORT_SYMBOL(acpi_bus_can_wakeup);
+
/* --------------------------------------------------------------------------
Event Management
-------------------------------------------------------------------------- */
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 6d18ca34b6a..0f2dd81736b 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -166,6 +166,8 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle)
"firmware_node");
ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
"physical_node");
+ if (acpi_dev->wakeup.flags.valid)
+ device_set_wakeup_capable(dev, true);
}
return 0;
diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c
new file mode 100644
index 00000000000..b9ab030a52d
--- /dev/null
+++ b/drivers/acpi/pci_slot.c
@@ -0,0 +1,368 @@
+/*
+ * pci_slot.c - ACPI PCI Slot Driver
+ *
+ * The code here is heavily leveraged from the acpiphp module.
+ * Thanks to Matthew Wilcox <matthew@wil.cx> for much guidance.
+ * Thanks to Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> for code
+ * review and fixes.
+ *
+ * Copyright (C) 2007 Alex Chiang <achiang@hp.com>
+ * Copyright (C) 2007 Hewlett-Packard Development Company, L.P.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+static int debug;
+static int check_sta_before_sun;
+
+#define DRIVER_VERSION "0.1"
+#define DRIVER_AUTHOR "Alex Chiang <achiang@hp.com>"
+#define DRIVER_DESC "ACPI PCI Slot Detection Driver"
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
+module_param(debug, bool, 0644);
+
+#define _COMPONENT ACPI_PCI_COMPONENT
+ACPI_MODULE_NAME("pci_slot");
+
+#define MY_NAME "pci_slot"
+#define err(format, arg...) printk(KERN_ERR "%s: " format , MY_NAME , ## arg)
+#define info(format, arg...) printk(KERN_INFO "%s: " format , MY_NAME , ## arg)
+#define dbg(format, arg...) \
+ do { \
+ if (debug) \
+ printk(KERN_DEBUG "%s: " format, \
+ MY_NAME , ## arg); \
+ } while (0)
+
+#define SLOT_NAME_SIZE 20 /* Inspired by #define in acpiphp.h */
+
+struct acpi_pci_slot {
+ acpi_handle root_handle; /* handle of the root bridge */
+ struct pci_slot *pci_slot; /* corresponding pci_slot */
+ struct list_head list; /* node in the list of slots */
+};
+
+static int acpi_pci_slot_add(acpi_handle handle);
+static void acpi_pci_slot_remove(acpi_handle handle);
+
+static LIST_HEAD(slot_list);
+static DEFINE_MUTEX(slot_list_lock);
+static struct acpi_pci_driver acpi_pci_slot_driver = {
+ .add = acpi_pci_slot_add,
+ .remove = acpi_pci_slot_remove,
+};
+
+static int
+check_slot(acpi_handle handle, int *device, unsigned long *sun)
+{
+ int retval = 0;
+ unsigned long adr, sta;
+ acpi_status status;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+ dbg("Checking slot on path: %s\n", (char *)buffer.pointer);
+
+ if (check_sta_before_sun) {
+ /* If SxFy doesn't have _STA, we just assume it's there */
+ status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+ if (ACPI_SUCCESS(status) && !(sta & ACPI_STA_DEVICE_PRESENT)) {
+ retval = -1;
+ goto out;
+ }
+ }
+
+ status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
+ if (ACPI_FAILURE(status)) {
+ dbg("_ADR returned %d on %s\n", status, (char *)buffer.pointer);
+ retval = -1;
+ goto out;
+ }
+
+ *device = (adr >> 16) & 0xffff;
+
+ /* No _SUN == not a slot == bail */
+ status = acpi_evaluate_integer(handle, "_SUN", NULL, sun);
+ if (ACPI_FAILURE(status)) {
+ dbg("_SUN returned %d on %s\n", status, (char *)buffer.pointer);
+ retval = -1;
+ goto out;
+ }
+
+out:
+ kfree(buffer.pointer);
+ return retval;
+}
+
+struct callback_args {
+ acpi_walk_callback user_function; /* only for walk_p2p_bridge */
+ struct pci_bus *pci_bus;
+ acpi_handle root_handle;
+};
+
+/*
+ * register_slot
+ *
+ * Called once for each SxFy object in the namespace. Don't worry about
+ * calling pci_create_slot multiple times for the same pci_bus:device,
+ * since each subsequent call simply bumps the refcount on the pci_slot.
+ *
+ * The number of calls to pci_destroy_slot from unregister_slot is
+ * symmetrical.
+ */
+static acpi_status
+register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+ int device;
+ unsigned long sun;
+ char name[SLOT_NAME_SIZE];
+ struct acpi_pci_slot *slot;
+ struct pci_slot *pci_slot;
+ struct callback_args *parent_context = context;
+ struct pci_bus *pci_bus = parent_context->pci_bus;
+
+ if (check_slot(handle, &device, &sun))
+ return AE_OK;
+
+ slot = kmalloc(sizeof(*slot), GFP_KERNEL);
+ if (!slot) {
+ err("%s: cannot allocate memory\n", __func__);
+ return AE_OK;
+ }
+
+ snprintf(name, sizeof(name), "%u", (u32)sun);
+ pci_slot = pci_create_slot(pci_bus, device, name);
+ if (IS_ERR(pci_slot)) {
+ err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot));
+ kfree(slot);
+ }
+
+ slot->root_handle = parent_context->root_handle;
+ slot->pci_slot = pci_slot;
+ INIT_LIST_HEAD(&slot->list);
+ mutex_lock(&slot_list_lock);
+ list_add(&slot->list, &slot_list);
+ mutex_unlock(&slot_list_lock);
+
+ dbg("pci_slot: %p, pci_bus: %x, device: %d, name: %s\n",
+ pci_slot, pci_bus->number, device, name);
+
+ return AE_OK;
+}
+
+/*
+ * walk_p2p_bridge - discover and walk p2p bridges
+ * @handle: points to an acpi_pci_root
+ * @context: p2p_bridge_context pointer
+ *
+ * Note that when we call ourselves recursively, we pass a different
+ * value of pci_bus in the child_context.
+ */
+static acpi_status
+walk_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+ int device, function;
+ unsigned long adr;
+ acpi_status status;
+ acpi_handle dummy_handle;
+ acpi_walk_callback user_function;
+
+ struct pci_dev *dev;
+ struct pci_bus *pci_bus;
+ struct callback_args child_context;
+ struct callback_args *parent_context = context;
+
+ pci_bus = parent_context->pci_bus;
+ user_function = parent_context->user_function;
+
+ status = acpi_get_handle(handle, "_ADR", &dummy_handle);
+ if (ACPI_FAILURE(status))
+ return AE_OK;
+
+ status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
+ if (ACPI_FAILURE(status))
+ return AE_OK;
+
+ device = (adr >> 16) & 0xffff;
+ function = adr & 0xffff;
+
+ dev = pci_get_slot(pci_bus, PCI_DEVFN(device, function));
+ if (!dev || !dev->subordinate)
+ goto out;
+
+ child_context.pci_bus = dev->subordinate;
+ child_context.user_function = user_function;
+ child_context.root_handle = parent_context->root_handle;
+
+ dbg("p2p bridge walk, pci_bus = %x\n", dev->subordinate->number);
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
+ user_function, &child_context, NULL);
+ if (ACPI_FAILURE(status))
+ goto out;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
+ walk_p2p_bridge, &child_context, NULL);
+out:
+ pci_dev_put(dev);
+ return AE_OK;
+}
+
+/*
+ * walk_root_bridge - generic root bridge walker
+ * @handle: points to an acpi_pci_root
+ * @user_function: user callback for slot objects
+ *
+ * Call user_function for all objects underneath this root bridge.
+ * Walk p2p bridges underneath us and call user_function on those too.
+ */
+static int
+walk_root_bridge(acpi_handle handle, acpi_walk_callback user_function)
+{
+ int seg, bus;
+ unsigned long tmp;
+ acpi_status status;
+ acpi_handle dummy_handle;
+ struct pci_bus *pci_bus;
+ struct callback_args context;
+
+ /* If the bridge doesn't have _STA, we assume it is always there */
+ status = acpi_get_handle(handle, "_STA", &dummy_handle);
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_evaluate_integer(handle, "_STA", NULL, &tmp);
+ if (ACPI_FAILURE(status)) {
+ info("%s: _STA evaluation failure\n", __func__);
+ return 0;
+ }
+ if ((tmp & ACPI_STA_DEVICE_FUNCTIONING) == 0)
+ /* don't register this object */
+ return 0;
+ }
+
+ status = acpi_evaluate_integer(handle, "_SEG", NULL, &tmp);
+ seg = ACPI_SUCCESS(status) ? tmp : 0;
+
+ status = acpi_evaluate_integer(handle, "_BBN", NULL, &tmp);
+ bus = ACPI_SUCCESS(status) ? tmp : 0;
+
+ pci_bus = pci_find_bus(seg, bus);
+ if (!pci_bus)
+ return 0;
+
+ context.pci_bus = pci_bus;
+ context.user_function = user_function;
+ context.root_handle = handle;
+
+ dbg("root bridge walk, pci_bus = %x\n", pci_bus->number);
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
+ user_function, &context, NULL);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
+ walk_p2p_bridge, &context, NULL);
+ if (ACPI_FAILURE(status))
+ err("%s: walk_p2p_bridge failure - %d\n", __func__, status);
+
+ return status;
+}
+
+/*
+ * acpi_pci_slot_add
+ * @handle: points to an acpi_pci_root
+ */
+static int
+acpi_pci_slot_add(acpi_handle handle)
+{
+ acpi_status status;
+
+ status = walk_root_bridge(handle, register_slot);
+ if (ACPI_FAILURE(status))
+ err("%s: register_slot failure - %d\n", __func__, status);
+
+ return status;
+}
+
+/*
+ * acpi_pci_slot_remove
+ * @handle: points to an acpi_pci_root
+ */
+static void
+acpi_pci_slot_remove(acpi_handle handle)
+{
+ struct acpi_pci_slot *slot, *tmp;
+
+ mutex_lock(&slot_list_lock);
+ list_for_each_entry_safe(slot, tmp, &slot_list, list) {
+ if (slot->root_handle == handle) {
+ list_del(&slot->list);
+ pci_destroy_slot(slot->pci_slot);
+ kfree(slot);
+ }
+ }
+ mutex_unlock(&slot_list_lock);
+}
+
+static int do_sta_before_sun(const struct dmi_system_id *d)
+{
+ info("%s detected: will evaluate _STA before calling _SUN\n", d->ident);
+ check_sta_before_sun = 1;
+ return 0;
+}
+
+static struct dmi_system_id acpi_pci_slot_dmi_table[] __initdata = {
+ /*
+ * Fujitsu Primequest machines will return 1023 to indicate an
+ * error if the _SUN method is evaluated on SxFy objects that
+ * are not present (as indicated by _STA), so for those machines,
+ * we want to check _STA before evaluating _SUN.
+ */
+ {
+ .callback = do_sta_before_sun,
+ .ident = "Fujitsu PRIMEQUEST",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "FUJITSU LIMITED"),
+ DMI_MATCH(DMI_BIOS_VERSION, "PRIMEQUEST"),
+ },
+ },
+ {}
+};
+
+static int __init
+acpi_pci_slot_init(void)
+{
+ dmi_check_system(acpi_pci_slot_dmi_table);
+ acpi_pci_register_driver(&acpi_pci_slot_driver);
+ return 0;
+}
+
+static void __exit
+acpi_pci_slot_exit(void)
+{
+ acpi_pci_unregister_driver(&acpi_pci_slot_driver);
+}
+
+module_init(acpi_pci_slot_init);
+module_exit(acpi_pci_slot_exit);
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 81e4f081a4a..4ab21cb1c8c 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -292,69 +292,135 @@ static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev)
return 0;
}
+/**
+ * acpi_device_sleep_wake - execute _DSW (Device Sleep Wake) or (deprecated in
+ * ACPI 3.0) _PSW (Power State Wake)
+ * @dev: Device to handle.
+ * @enable: 0 - disable, 1 - enable the wake capabilities of the device.
+ * @sleep_state: Target sleep state of the system.
+ * @dev_state: Target power state of the device.
+ *
+ * Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power
+ * State Wake) for the device, if present. On failure reset the device's
+ * wakeup.flags.valid flag.
+ *
+ * RETURN VALUE:
+ * 0 if either _DSW or _PSW has been successfully executed
+ * 0 if neither _DSW nor _PSW has been found
+ * -ENODEV if the execution of either _DSW or _PSW has failed
+ */
+int acpi_device_sleep_wake(struct acpi_device *dev,
+ int enable, int sleep_state, int dev_state)
+{
+ union acpi_object in_arg[3];
+ struct acpi_object_list arg_list = { 3, in_arg };
+ acpi_status status = AE_OK;
+
+ /*
+ * Try to execute _DSW first.
+ *
+ * Three agruments are needed for the _DSW object:
+ * Argument 0: enable/disable the wake capabilities
+ * Argument 1: target system state
+ * Argument 2: target device state
+ * When _DSW object is called to disable the wake capabilities, maybe
+ * the first argument is filled. The values of the other two agruments
+ * are meaningless.
+ */
+ in_arg[0].type = ACPI_TYPE_INTEGER;
+ in_arg[0].integer.value = enable;
+ in_arg[1].type = ACPI_TYPE_INTEGER;
+ in_arg[1].integer.value = sleep_state;
+ in_arg[2].type = ACPI_TYPE_INTEGER;
+ in_arg[2].integer.value = dev_state;
+ status = acpi_evaluate_object(dev->handle, "_DSW", &arg_list, NULL);
+ if (ACPI_SUCCESS(status)) {
+ return 0;
+ } else if (status != AE_NOT_FOUND) {
+ printk(KERN_ERR PREFIX "_DSW execution failed\n");
+ dev->wakeup.flags.valid = 0;
+ return -ENODEV;
+ }
+
+ /* Execute _PSW */
+ arg_list.count = 1;
+ in_arg[0].integer.value = enable;
+ status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL);
+ if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
+ printk(KERN_ERR PREFIX "_PSW execution failed\n");
+ dev->wakeup.flags.valid = 0;
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
/*
* Prepare a wakeup device, two steps (Ref ACPI 2.0:P229):
* 1. Power on the power resources required for the wakeup device
- * 2. Enable _PSW (power state wake) for the device if present
+ * 2. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power
+ * State Wake) for the device, if present
*/
-int acpi_enable_wakeup_device_power(struct acpi_device *dev)
+int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state)
{
- union acpi_object arg = { ACPI_TYPE_INTEGER };
- struct acpi_object_list arg_list = { 1, &arg };
- acpi_status status = AE_OK;
- int i;
- int ret = 0;
+ int i, err;
if (!dev || !dev->wakeup.flags.valid)
- return -1;
+ return -EINVAL;
+
+ /*
+ * Do not execute the code below twice in a row without calling
+ * acpi_disable_wakeup_device_power() in between for the same device
+ */
+ if (dev->wakeup.flags.prepared)
+ return 0;
- arg.integer.value = 1;
/* Open power resource */
for (i = 0; i < dev->wakeup.resources.count; i++) {
- ret = acpi_power_on(dev->wakeup.resources.handles[i], dev);
+ int ret = acpi_power_on(dev->wakeup.resources.handles[i], dev);
if (ret) {
printk(KERN_ERR PREFIX "Transition power state\n");
dev->wakeup.flags.valid = 0;
- return -1;
+ return -ENODEV;
}
}
- /* Execute PSW */
- status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL);
- if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
- printk(KERN_ERR PREFIX "Evaluate _PSW\n");
- dev->wakeup.flags.valid = 0;
- ret = -1;
- }
+ /*
+ * Passing 3 as the third argument below means the device may be placed
+ * in arbitrary power state afterwards.
+ */
+ err = acpi_device_sleep_wake(dev, 1, sleep_state, 3);
+ if (!err)
+ dev->wakeup.flags.prepared = 1;
- return ret;
+ return err;
}
/*
* Shutdown a wakeup device, counterpart of above method
- * 1. Disable _PSW (power state wake)
+ * 1. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power
+ * State Wake) for the device, if present
* 2. Shutdown down the power resources
*/
int acpi_disable_wakeup_device_power(struct acpi_device *dev)
{
- union acpi_object arg = { ACPI_TYPE_INTEGER };
- struct acpi_object_list arg_list = { 1, &arg };
- acpi_status status = AE_OK;
- int i;
- int ret = 0;
-
+ int i, ret;
if (!dev || !dev->wakeup.flags.valid)
- return -1;
+ return -EINVAL;
- arg.integer.value = 0;
- /* Execute PSW */
- status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL);
- if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
- printk(KERN_ERR PREFIX "Evaluate _PSW\n");
- dev->wakeup.flags.valid = 0;
- return -1;
- }
+ /*
+ * Do not execute the code below twice in a row without calling
+ * acpi_enable_wakeup_device_power() in between for the same device
+ */
+ if (!dev->wakeup.flags.prepared)
+ return 0;
+
+ dev->wakeup.flags.prepared = 0;
+
+ ret = acpi_device_sleep_wake(dev, 0, 0, 0);
+ if (ret)
+ return ret;
/* Close power resource */
for (i = 0; i < dev->wakeup.resources.count; i++) {
@@ -362,7 +428,7 @@ int acpi_disable_wakeup_device_power(struct acpi_device *dev)
if (ret) {
printk(KERN_ERR PREFIX "Transition power state\n");
dev->wakeup.flags.valid = 0;
- return -1;
+ return -ENODEV;
}
}
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 5b049cd7955..f3132aa47a6 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -703,9 +703,7 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
acpi_status status = 0;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *package = NULL;
- union acpi_object in_arg[3];
- struct acpi_object_list arg_list = { 3, in_arg };
- acpi_status psw_status = AE_OK;
+ int psw_error;
struct acpi_device_id button_device_ids[] = {
{"PNP0C0D", 0},
@@ -737,39 +735,11 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
* So it is necessary to call _DSW object first. Only when it is not
* present will the _PSW object used.
*/
- /*
- * Three agruments are needed for the _DSW object.
- * Argument 0: enable/disable the wake capabilities
- * When _DSW object is called to disable the wake capabilities, maybe
- * the first argument is filled. The value of the other two agruments
- * is meaningless.
- */
- in_arg[0].type = ACPI_TYPE_INTEGER;
- in_arg[0].integer.value = 0;
- in_arg[1].type = ACPI_TYPE_INTEGER;
- in_arg[1].integer.value = 0;
- in_arg[2].type = ACPI_TYPE_INTEGER;
- in_arg[2].integer.value = 0;
- psw_status = acpi_evaluate_object(device->handle, "_DSW",
- &arg_list, NULL);
- if (ACPI_FAILURE(psw_status) && (psw_status != AE_NOT_FOUND))
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "error in evaluate _DSW\n"));
- /*
- * When the _DSW object is not present, OSPM will call _PSW object.
- */
- if (psw_status == AE_NOT_FOUND) {
- /*
- * Only one agruments is required for the _PSW object.
- * agrument 0: enable/disable the wake capabilities
- */
- arg_list.count = 1;
- in_arg[0].integer.value = 0;
- psw_status = acpi_evaluate_object(device->handle, "_PSW",
- &arg_list, NULL);
- if (ACPI_FAILURE(psw_status) && (psw_status != AE_NOT_FOUND))
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "error in "
- "evaluate _PSW\n"));
- }
+ psw_error = acpi_device_sleep_wake(device, 0, 0, 0);
+ if (psw_error)
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "error in _DSW or _PSW evaluation\n"));
+
/* Power button, Lid switch always enable wakeup */
if (!acpi_match_device_ids(device, button_device_ids))
device->wakeup.flags.run_wake = 1;
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 244e352f766..0489a7d1d42 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -24,10 +24,6 @@
u8 sleep_states[ACPI_S_STATE_COUNT];
-#ifdef CONFIG_PM_SLEEP
-static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-#endif
-
static int acpi_sleep_prepare(u32 acpi_state)
{
#ifdef CONFIG_ACPI_SLEEP
@@ -49,9 +45,96 @@ static int acpi_sleep_prepare(u32 acpi_state)
return 0;
}
-#ifdef CONFIG_SUSPEND
-static struct platform_suspend_ops acpi_suspend_ops;
+#ifdef CONFIG_PM_SLEEP
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
+/*
+ * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
+ * user to request that behavior by using the 'acpi_old_suspend_ordering'
+ * kernel command line option that causes the following variable to be set.
+ */
+static bool old_suspend_ordering;
+
+void __init acpi_old_suspend_ordering(void)
+{
+ old_suspend_ordering = true;
+}
+
+/**
+ * acpi_pm_disable_gpes - Disable the GPEs.
+ */
+static int acpi_pm_disable_gpes(void)
+{
+ acpi_hw_disable_all_gpes();
+ return 0;
+}
+
+/**
+ * __acpi_pm_prepare - Prepare the platform to enter the target state.
+ *
+ * If necessary, set the firmware waking vector and do arch-specific
+ * nastiness to get the wakeup code to the waking vector.
+ */
+static int __acpi_pm_prepare(void)
+{
+ int error = acpi_sleep_prepare(acpi_target_sleep_state);
+
+ if (error)
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ return error;
+}
+
+/**
+ * acpi_pm_prepare - Prepare the platform to enter the target sleep
+ * state and disable the GPEs.
+ */
+static int acpi_pm_prepare(void)
+{
+ int error = __acpi_pm_prepare();
+
+ if (!error)
+ acpi_hw_disable_all_gpes();
+ return error;
+}
+
+/**
+ * acpi_pm_finish - Instruct the platform to leave a sleep state.
+ *
+ * This is called after we wake back up (or if entering the sleep state
+ * failed).
+ */
+static void acpi_pm_finish(void)
+{
+ u32 acpi_state = acpi_target_sleep_state;
+
+ if (acpi_state == ACPI_STATE_S0)
+ return;
+
+ printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
+ acpi_state);
+ acpi_disable_wakeup_device(acpi_state);
+ acpi_leave_sleep_state(acpi_state);
+
+ /* reset firmware waking vector */
+ acpi_set_firmware_waking_vector((acpi_physical_address) 0);
+
+ acpi_target_sleep_state = ACPI_STATE_S0;
+}
+
+/**
+ * acpi_pm_end - Finish up suspend sequence.
+ */
+static void acpi_pm_end(void)
+{
+ /*
+ * This is necessary in case acpi_pm_finish() is not called during a
+ * failing transition to a sleep state.
+ */
+ acpi_target_sleep_state = ACPI_STATE_S0;
+}
+#endif /* CONFIG_PM_SLEEP */
+#ifdef CONFIG_SUSPEND
extern void do_suspend_lowlevel(void);
static u32 acpi_suspend_states[] = {
@@ -65,7 +148,6 @@ static u32 acpi_suspend_states[] = {
* acpi_suspend_begin - Set the target system sleep state to the state
* associated with given @pm_state, if supported.
*/
-
static int acpi_suspend_begin(suspend_state_t pm_state)
{
u32 acpi_state = acpi_suspend_states[pm_state];
@@ -82,25 +164,6 @@ static int acpi_suspend_begin(suspend_state_t pm_state)
}
/**
- * acpi_suspend_prepare - Do preliminary suspend work.
- *
- * If necessary, set the firmware waking vector and do arch-specific
- * nastiness to get the wakeup code to the waking vector.
- */
-
-static int acpi_suspend_prepare(void)
-{
- int error = acpi_sleep_prepare(acpi_target_sleep_state);
-
- if (error) {
- acpi_target_sleep_state = ACPI_STATE_S0;
- return error;
- }
-
- return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
-}
-
-/**
* acpi_suspend_enter - Actually enter a sleep state.
* @pm_state: ignored
*
@@ -108,7 +171,6 @@ static int acpi_suspend_prepare(void)
* assembly, which in turn call acpi_enter_sleep_state().
* It's unfortunate, but it works. Please fix if you're feeling frisky.
*/
-
static int acpi_suspend_enter(suspend_state_t pm_state)
{
acpi_status status = AE_OK;
@@ -165,39 +227,6 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}
-/**
- * acpi_suspend_finish - Instruct the platform to leave a sleep state.
- *
- * This is called after we wake back up (or if entering the sleep state
- * failed).
- */
-
-static void acpi_suspend_finish(void)
-{
- u32 acpi_state = acpi_target_sleep_state;
-
- acpi_disable_wakeup_device(acpi_state);
- acpi_leave_sleep_state(acpi_state);
-
- /* reset firmware waking vector */
- acpi_set_firmware_waking_vector((acpi_physical_address) 0);
-
- acpi_target_sleep_state = ACPI_STATE_S0;
-}
-
-/**
- * acpi_suspend_end - Finish up suspend sequence.
- */
-
-static void acpi_suspend_end(void)
-{
- /*
- * This is necessary in case acpi_suspend_finish() is not called during a
- * failing transition to a sleep state.
- */
- acpi_target_sleep_state = ACPI_STATE_S0;
-}
-
static int acpi_suspend_state_valid(suspend_state_t pm_state)
{
u32 acpi_state;
@@ -217,10 +246,39 @@ static int acpi_suspend_state_valid(suspend_state_t pm_state)
static struct platform_suspend_ops acpi_suspend_ops = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin,
- .prepare = acpi_suspend_prepare,
+ .prepare = acpi_pm_prepare,
.enter = acpi_suspend_enter,
- .finish = acpi_suspend_finish,
- .end = acpi_suspend_end,
+ .finish = acpi_pm_finish,
+ .end = acpi_pm_end,
+};
+
+/**
+ * acpi_suspend_begin_old - Set the target system sleep state to the
+ * state associated with given @pm_state, if supported, and
+ * execute the _PTS control method. This function is used if the
+ * pre-ACPI 2.0 suspend ordering has been requested.
+ */
+static int acpi_suspend_begin_old(suspend_state_t pm_state)
+{
+ int error = acpi_suspend_begin(pm_state);
+
+ if (!error)
+ error = __acpi_pm_prepare();
+ return error;
+}
+
+/*
+ * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
+ * been requested.
+ */
+static struct platform_suspend_ops acpi_suspend_ops_old = {
+ .valid = acpi_suspend_state_valid,
+ .begin = acpi_suspend_begin_old,
+ .prepare = acpi_pm_disable_gpes,
+ .enter = acpi_suspend_enter,
+ .finish = acpi_pm_finish,
+ .end = acpi_pm_end,
+ .recover = acpi_pm_finish,
};
#endif /* CONFIG_SUSPEND */
@@ -228,22 +286,9 @@ static struct platform_suspend_ops acpi_suspend_ops = {
static int acpi_hibernation_begin(void)
{
acpi_target_sleep_state = ACPI_STATE_S4;
-
return 0;
}
-static int acpi_hibernation_prepare(void)
-{
- int error = acpi_sleep_prepare(ACPI_STATE_S4);
-
- if (error) {
- acpi_target_sleep_state = ACPI_STATE_S0;
- return error;
- }
-
- return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
-}
-
static int acpi_hibernation_enter(void)
{
acpi_status status = AE_OK;
@@ -273,52 +318,55 @@ static void acpi_hibernation_leave(void)
acpi_leave_sleep_state_prep(ACPI_STATE_S4);
}
-static void acpi_hibernation_finish(void)
+static void acpi_pm_enable_gpes(void)
{
- acpi_disable_wakeup_device(ACPI_STATE_S4);
- acpi_leave_sleep_state(ACPI_STATE_S4);
-
- /* reset firmware waking vector */
- acpi_set_firmware_waking_vector((acpi_physical_address) 0);
-
- acpi_target_sleep_state = ACPI_STATE_S0;
+ acpi_hw_enable_all_runtime_gpes();
}
-static void acpi_hibernation_end(void)
-{
- /*
- * This is necessary in case acpi_hibernation_finish() is not called
- * during a failing transition to the sleep state.
- */
- acpi_target_sleep_state = ACPI_STATE_S0;
-}
+static struct platform_hibernation_ops acpi_hibernation_ops = {
+ .begin = acpi_hibernation_begin,
+ .end = acpi_pm_end,
+ .pre_snapshot = acpi_pm_prepare,
+ .finish = acpi_pm_finish,
+ .prepare = acpi_pm_prepare,
+ .enter = acpi_hibernation_enter,
+ .leave = acpi_hibernation_leave,
+ .pre_restore = acpi_pm_disable_gpes,
+ .restore_cleanup = acpi_pm_enable_gpes,
+};
-static int acpi_hibernation_pre_restore(void)
+/**
+ * acpi_hibernation_begin_old - Set the target system sleep state to
+ * ACPI_STATE_S4 and execute the _PTS control method. This
+ * function is used if the pre-ACPI 2.0 suspend ordering has been
+ * requested.
+ */
+static int acpi_hibernation_begin_old(void)
{
- acpi_status status;
-
- status = acpi_hw_disable_all_gpes();
-
- return ACPI_SUCCESS(status) ? 0 : -EFAULT;
-}
+ int error = acpi_sleep_prepare(ACPI_STATE_S4);
-static void acpi_hibernation_restore_cleanup(void)
-{
- acpi_hw_enable_all_runtime_gpes();
+ if (!error)
+ acpi_target_sleep_state = ACPI_STATE_S4;
+ return error;
}
-static struct platform_hibernation_ops acpi_hibernation_ops = {
- .begin = acpi_hibernation_begin,
- .end = acpi_hibernation_end,
- .pre_snapshot = acpi_hibernation_prepare,
- .finish = acpi_hibernation_finish,
- .prepare = acpi_hibernation_prepare,
+/*
+ * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
+ * been requested.
+ */
+static struct platform_hibernation_ops acpi_hibernation_ops_old = {
+ .begin = acpi_hibernation_begin_old,
+ .end = acpi_pm_end,
+ .pre_snapshot = acpi_pm_disable_gpes,
+ .finish = acpi_pm_finish,
+ .prepare = acpi_pm_disable_gpes,
.enter = acpi_hibernation_enter,
.leave = acpi_hibernation_leave,
- .pre_restore = acpi_hibernation_pre_restore,
- .restore_cleanup = acpi_hibernation_restore_cleanup,
+ .pre_restore = acpi_pm_disable_gpes,
+ .restore_cleanup = acpi_pm_enable_gpes,
+ .recover = acpi_pm_finish,
};
-#endif /* CONFIG_HIBERNATION */
+#endif /* CONFIG_HIBERNATION */
int acpi_suspend(u32 acpi_state)
{
@@ -419,6 +467,31 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
*d_min_p = d_min;
return d_max;
}
+
+/**
+ * acpi_pm_device_sleep_wake - enable or disable the system wake-up
+ * capability of given device
+ * @dev: device to handle
+ * @enable: 'true' - enable, 'false' - disable the wake-up capability
+ */
+int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+ acpi_handle handle;
+ struct acpi_device *adev;
+
+ if (!device_may_wakeup(dev))
+ return -EINVAL;
+
+ handle = DEVICE_ACPI_HANDLE(dev);
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ printk(KERN_DEBUG "ACPI handle has no context!\n");
+ return -ENODEV;
+ }
+
+ return enable ?
+ acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
+ acpi_disable_wakeup_device_power(adev);
+}
#endif
static void acpi_power_off_prepare(void)
@@ -460,13 +533,15 @@ int __init acpi_sleep_init(void)
}
}
- suspend_set_ops(&acpi_suspend_ops);
+ suspend_set_ops(old_suspend_ordering ?
+ &acpi_suspend_ops_old : &acpi_suspend_ops);
#endif
#ifdef CONFIG_HIBERNATION
status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
if (ACPI_SUCCESS(status)) {
- hibernation_set_ops(&acpi_hibernation_ops);
+ hibernation_set_ops(old_suspend_ordering ?
+ &acpi_hibernation_ops_old : &acpi_hibernation_ops);
sleep_states[ACPI_STATE_S4] = 1;
printk(" S4");
}
diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c
index ed8e41becf0..38655eb132d 100644
--- a/drivers/acpi/sleep/wakeup.c
+++ b/drivers/acpi/sleep/wakeup.c
@@ -42,7 +42,7 @@ void acpi_enable_wakeup_device_prep(u8 sleep_state)
continue;
spin_unlock(&acpi_device_lock);
- acpi_enable_wakeup_device_power(dev);
+ acpi_enable_wakeup_device_power(dev, sleep_state);
spin_lock(&acpi_device_lock);
}
spin_unlock(&acpi_device_lock);
@@ -66,13 +66,15 @@ void acpi_enable_wakeup_device(u8 sleep_state)
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
+
if (!dev->wakeup.flags.valid)
continue;
+
/* If users want to disable run-wake GPE,
* we only disable it for wake and leave it for runtime
*/
- if (!dev->wakeup.state.enabled ||
- sleep_state > (u32) dev->wakeup.sleep_state) {
+ if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared)
+ || sleep_state > (u32) dev->wakeup.sleep_state) {
if (dev->wakeup.flags.run_wake) {
spin_unlock(&acpi_device_lock);
/* set_gpe_type will disable GPE, leave it like that */
@@ -110,8 +112,9 @@ void acpi_disable_wakeup_device(u8 sleep_state)
if (!dev->wakeup.flags.valid)
continue;
- if (!dev->wakeup.state.enabled ||
- sleep_state > (u32) dev->wakeup.sleep_state) {
+
+ if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared)
+ || sleep_state > (u32) dev->wakeup.sleep_state) {
if (dev->wakeup.flags.run_wake) {
spin_unlock(&acpi_device_lock);
acpi_set_gpe_type(dev->wakeup.gpe_device,
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 911ec600fe7..3f940393d6c 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -453,6 +453,8 @@ int platform_driver_register(struct platform_driver *drv)
drv->driver.suspend = platform_drv_suspend;
if (drv->resume)
drv->driver.resume = platform_drv_resume;
+ if (drv->pm)
+ drv->driver.pm = &drv->pm->base;
return driver_register(&drv->driver);
}
EXPORT_SYMBOL_GPL(platform_driver_register);
@@ -560,7 +562,9 @@ static int platform_match(struct device *dev, struct device_driver *drv)
return (strncmp(pdev->name, drv->name, BUS_ID_SIZE) == 0);
}
-static int platform_suspend(struct device *dev, pm_message_t mesg)
+#ifdef CONFIG_PM_SLEEP
+
+static int platform_legacy_suspend(struct device *dev, pm_message_t mesg)
{
int ret = 0;
@@ -570,7 +574,7 @@ static int platform_suspend(struct device *dev, pm_message_t mesg)
return ret;
}
-static int platform_suspend_late(struct device *dev, pm_message_t mesg)
+static int platform_legacy_suspend_late(struct device *dev, pm_message_t mesg)
{
struct platform_driver *drv = to_platform_driver(dev->driver);
struct platform_device *pdev;
@@ -583,7 +587,7 @@ static int platform_suspend_late(struct device *dev, pm_message_t mesg)
return ret;
}
-static int platform_resume_early(struct device *dev)
+static int platform_legacy_resume_early(struct device *dev)
{
struct platform_driver *drv = to_platform_driver(dev->driver);
struct platform_device *pdev;
@@ -596,7 +600,7 @@ static int platform_resume_early(struct device *dev)
return ret;
}
-static int platform_resume(struct device *dev)
+static int platform_legacy_resume(struct device *dev)
{
int ret = 0;
@@ -606,15 +610,291 @@ static int platform_resume(struct device *dev)
return ret;
}
+static int platform_pm_prepare(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (drv && drv->pm && drv->pm->prepare)
+ ret = drv->pm->prepare(dev);
+
+ return ret;
+}
+
+static void platform_pm_complete(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+
+ if (drv && drv->pm && drv->pm->complete)
+ drv->pm->complete(dev);
+}
+
+#ifdef CONFIG_SUSPEND
+
+static int platform_pm_suspend(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (drv && drv->pm) {
+ if (drv->pm->suspend)
+ ret = drv->pm->suspend(dev);
+ } else {
+ ret = platform_legacy_suspend(dev, PMSG_SUSPEND);
+ }
+
+ return ret;
+}
+
+static int platform_pm_suspend_noirq(struct device *dev)
+{
+ struct platform_driver *pdrv;
+ int ret = 0;
+
+ if (!dev->driver)
+ return 0;
+
+ pdrv = to_platform_driver(dev->driver);
+ if (pdrv->pm) {
+ if (pdrv->pm->suspend_noirq)
+ ret = pdrv->pm->suspend_noirq(dev);
+ } else {
+ ret = platform_legacy_suspend_late(dev, PMSG_SUSPEND);
+ }
+
+ return ret;
+}
+
+static int platform_pm_resume(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (drv && drv->pm) {
+ if (drv->pm->resume)
+ ret = drv->pm->resume(dev);
+ } else {
+ ret = platform_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int platform_pm_resume_noirq(struct device *dev)
+{
+ struct platform_driver *pdrv;
+ int ret = 0;
+
+ if (!dev->driver)
+ return 0;
+
+ pdrv = to_platform_driver(dev->driver);
+ if (pdrv->pm) {
+ if (pdrv->pm->resume_noirq)
+ ret = pdrv->pm->resume_noirq(dev);
+ } else {
+ ret = platform_legacy_resume_early(dev);
+ }
+
+ return ret;
+}
+
+#else /* !CONFIG_SUSPEND */
+
+#define platform_pm_suspend NULL
+#define platform_pm_resume NULL
+#define platform_pm_suspend_noirq NULL
+#define platform_pm_resume_noirq NULL
+
+#endif /* !CONFIG_SUSPEND */
+
+#ifdef CONFIG_HIBERNATION
+
+static int platform_pm_freeze(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->freeze)
+ ret = drv->pm->freeze(dev);
+ } else {
+ ret = platform_legacy_suspend(dev, PMSG_FREEZE);
+ }
+
+ return ret;
+}
+
+static int platform_pm_freeze_noirq(struct device *dev)
+{
+ struct platform_driver *pdrv;
+ int ret = 0;
+
+ if (!dev->driver)
+ return 0;
+
+ pdrv = to_platform_driver(dev->driver);
+ if (pdrv->pm) {
+ if (pdrv->pm->freeze_noirq)
+ ret = pdrv->pm->freeze_noirq(dev);
+ } else {
+ ret = platform_legacy_suspend_late(dev, PMSG_FREEZE);
+ }
+
+ return ret;
+}
+
+static int platform_pm_thaw(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (drv && drv->pm) {
+ if (drv->pm->thaw)
+ ret = drv->pm->thaw(dev);
+ } else {
+ ret = platform_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int platform_pm_thaw_noirq(struct device *dev)
+{
+ struct platform_driver *pdrv;
+ int ret = 0;
+
+ if (!dev->driver)
+ return 0;
+
+ pdrv = to_platform_driver(dev->driver);
+ if (pdrv->pm) {
+ if (pdrv->pm->thaw_noirq)
+ ret = pdrv->pm->thaw_noirq(dev);
+ } else {
+ ret = platform_legacy_resume_early(dev);
+ }
+
+ return ret;
+}
+
+static int platform_pm_poweroff(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (drv && drv->pm) {
+ if (drv->pm->poweroff)
+ ret = drv->pm->poweroff(dev);
+ } else {
+ ret = platform_legacy_suspend(dev, PMSG_HIBERNATE);
+ }
+
+ return ret;
+}
+
+static int platform_pm_poweroff_noirq(struct device *dev)
+{
+ struct platform_driver *pdrv;
+ int ret = 0;
+
+ if (!dev->driver)
+ return 0;
+
+ pdrv = to_platform_driver(dev->driver);
+ if (pdrv->pm) {
+ if (pdrv->pm->poweroff_noirq)
+ ret = pdrv->pm->poweroff_noirq(dev);
+ } else {
+ ret = platform_legacy_suspend_late(dev, PMSG_HIBERNATE);
+ }
+
+ return ret;
+}
+
+static int platform_pm_restore(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (drv && drv->pm) {
+ if (drv->pm->restore)
+ ret = drv->pm->restore(dev);
+ } else {
+ ret = platform_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int platform_pm_restore_noirq(struct device *dev)
+{
+ struct platform_driver *pdrv;
+ int ret = 0;
+
+ if (!dev->driver)
+ return 0;
+
+ pdrv = to_platform_driver(dev->driver);
+ if (pdrv->pm) {
+ if (pdrv->pm->restore_noirq)
+ ret = pdrv->pm->restore_noirq(dev);
+ } else {
+ ret = platform_legacy_resume_early(dev);
+ }
+
+ return ret;
+}
+
+#else /* !CONFIG_HIBERNATION */
+
+#define platform_pm_freeze NULL
+#define platform_pm_thaw NULL
+#define platform_pm_poweroff NULL
+#define platform_pm_restore NULL
+#define platform_pm_freeze_noirq NULL
+#define platform_pm_thaw_noirq NULL
+#define platform_pm_poweroff_noirq NULL
+#define platform_pm_restore_noirq NULL
+
+#endif /* !CONFIG_HIBERNATION */
+
+struct pm_ext_ops platform_pm_ops = {
+ .base = {
+ .prepare = platform_pm_prepare,
+ .complete = platform_pm_complete,
+ .suspend = platform_pm_suspend,
+ .resume = platform_pm_resume,
+ .freeze = platform_pm_freeze,
+ .thaw = platform_pm_thaw,
+ .poweroff = platform_pm_poweroff,
+ .restore = platform_pm_restore,
+ },
+ .suspend_noirq = platform_pm_suspend_noirq,
+ .resume_noirq = platform_pm_resume_noirq,
+ .freeze_noirq = platform_pm_freeze_noirq,
+ .thaw_noirq = platform_pm_thaw_noirq,
+ .poweroff_noirq = platform_pm_poweroff_noirq,
+ .restore_noirq = platform_pm_restore_noirq,
+};
+
+#define PLATFORM_PM_OPS_PTR &platform_pm_ops
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define PLATFORM_PM_OPS_PTR NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
struct bus_type platform_bus_type = {
.name = "platform",
.dev_attrs = platform_dev_attrs,
.match = platform_match,
.uevent = platform_uevent,
- .suspend = platform_suspend,
- .suspend_late = platform_suspend_late,
- .resume_early = platform_resume_early,
- .resume = platform_resume,
+ .pm = PLATFORM_PM_OPS_PTR,
};
EXPORT_SYMBOL_GPL(platform_bus_type);
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 45cc3d9eacb..3250c5257b7 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -12,11 +12,9 @@
* and add it to the list of power-controlled devices. sysfs entries for
* controlling device power management will also be added.
*
- * A different set of lists than the global subsystem list are used to
- * keep track of power info because we use different lists to hold
- * devices based on what stage of the power management process they
- * are in. The power domain dependencies may also differ from the
- * ancestral dependencies that the subsystem list maintains.
+ * A separate list is used for keeping track of power info, because the power
+ * domain dependencies may differ from the ancestral dependencies that the
+ * subsystem list maintains.
*/
#include <linux/device.h>
@@ -30,31 +28,40 @@
#include "power.h"
/*
- * The entries in the dpm_active list are in a depth first order, simply
+ * The entries in the dpm_list list are in a depth first order, simply
* because children are guaranteed to be discovered after parents, and
* are inserted at the back of the list on discovery.
*
- * All the other lists are kept in the same order, for consistency.
- * However the lists aren't always traversed in the same order.
- * Semaphores must be acquired from the top (i.e., front) down
- * and released in the opposite order. Devices must be suspended
- * from the bottom (i.e., end) up and resumed in the opposite order.
- * That way no parent will be suspended while it still has an active
- * child.
- *
* Since device_pm_add() may be called with a device semaphore held,
* we must never try to acquire a device semaphore while holding
* dpm_list_mutex.
*/
-LIST_HEAD(dpm_active);
-static LIST_HEAD(dpm_off);
-static LIST_HEAD(dpm_off_irq);
+LIST_HEAD(dpm_list);
static DEFINE_MUTEX(dpm_list_mtx);
-/* 'true' if all devices have been suspended, protected by dpm_list_mtx */
-static bool all_sleeping;
+/*
+ * Set once the preparation of devices for a PM transition has started, reset
+ * before starting to resume devices. Protected by dpm_list_mtx.
+ */
+static bool transition_started;
+
+/**
+ * device_pm_lock - lock the list of active devices used by the PM core
+ */
+void device_pm_lock(void)
+{
+ mutex_lock(&dpm_list_mtx);
+}
+
+/**
+ * device_pm_unlock - unlock the list of active devices used by the PM core
+ */
+void device_pm_unlock(void)
+{
+ mutex_unlock(&dpm_list_mtx);
+}
/**
* device_pm_add - add a device to the list of active devices
@@ -68,17 +75,25 @@ int device_pm_add(struct device *dev)
dev->bus ? dev->bus->name : "No Bus",
kobject_name(&dev->kobj));
mutex_lock(&dpm_list_mtx);
- if ((dev->parent && dev->parent->power.sleeping) || all_sleeping) {
- if (dev->parent->power.sleeping)
- dev_warn(dev, "parent %s is sleeping\n",
+ if (dev->parent) {
+ if (dev->parent->power.status >= DPM_SUSPENDING) {
+ dev_warn(dev, "parent %s is sleeping, will not add\n",
dev->parent->bus_id);
- else
- dev_warn(dev, "all devices are sleeping\n");
+ WARN_ON(true);
+ }
+ } else if (transition_started) {
+ /*
+ * We refuse to register parentless devices while a PM
+ * transition is in progress in order to avoid leaving them
+ * unhandled down the road
+ */
WARN_ON(true);
}
error = dpm_sysfs_add(dev);
- if (!error)
- list_add_tail(&dev->power.entry, &dpm_active);
+ if (!error) {
+ dev->power.status = DPM_ON;
+ list_add_tail(&dev->power.entry, &dpm_list);
+ }
mutex_unlock(&dpm_list_mtx);
return error;
}
@@ -100,73 +115,243 @@ void device_pm_remove(struct device *dev)
mutex_unlock(&dpm_list_mtx);
}
+/**
+ * pm_op - execute the PM operation appropiate for given PM event
+ * @dev: Device.
+ * @ops: PM operations to choose from.
+ * @state: PM transition of the system being carried out.
+ */
+static int pm_op(struct device *dev, struct pm_ops *ops, pm_message_t state)
+{
+ int error = 0;
+
+ switch (state.event) {
+#ifdef CONFIG_SUSPEND
+ case PM_EVENT_SUSPEND:
+ if (ops->suspend) {
+ error = ops->suspend(dev);
+ suspend_report_result(ops->suspend, error);
+ }
+ break;
+ case PM_EVENT_RESUME:
+ if (ops->resume) {
+ error = ops->resume(dev);
+ suspend_report_result(ops->resume, error);
+ }
+ break;
+#endif /* CONFIG_SUSPEND */
+#ifdef CONFIG_HIBERNATION
+ case PM_EVENT_FREEZE:
+ case PM_EVENT_QUIESCE:
+ if (ops->freeze) {
+ error = ops->freeze(dev);
+ suspend_report_result(ops->freeze, error);
+ }
+ break;
+ case PM_EVENT_HIBERNATE:
+ if (ops->poweroff) {
+ error = ops->poweroff(dev);
+ suspend_report_result(ops->poweroff, error);
+ }
+ break;
+ case PM_EVENT_THAW:
+ case PM_EVENT_RECOVER:
+ if (ops->thaw) {
+ error = ops->thaw(dev);
+ suspend_report_result(ops->thaw, error);
+ }
+ break;
+ case PM_EVENT_RESTORE:
+ if (ops->restore) {
+ error = ops->restore(dev);
+ suspend_report_result(ops->restore, error);
+ }
+ break;
+#endif /* CONFIG_HIBERNATION */
+ default:
+ error = -EINVAL;
+ }
+ return error;
+}
+
+/**
+ * pm_noirq_op - execute the PM operation appropiate for given PM event
+ * @dev: Device.
+ * @ops: PM operations to choose from.
+ * @state: PM transition of the system being carried out.
+ *
+ * The operation is executed with interrupts disabled by the only remaining
+ * functional CPU in the system.
+ */
+static int pm_noirq_op(struct device *dev, struct pm_ext_ops *ops,
+ pm_message_t state)
+{
+ int error = 0;
+
+ switch (state.event) {
+#ifdef CONFIG_SUSPEND
+ case PM_EVENT_SUSPEND:
+ if (ops->suspend_noirq) {
+ error = ops->suspend_noirq(dev);
+ suspend_report_result(ops->suspend_noirq, error);
+ }
+ break;
+ case PM_EVENT_RESUME:
+ if (ops->resume_noirq) {
+ error = ops->resume_noirq(dev);
+ suspend_report_result(ops->resume_noirq, error);
+ }
+ break;
+#endif /* CONFIG_SUSPEND */
+#ifdef CONFIG_HIBERNATION
+ case PM_EVENT_FREEZE:
+ case PM_EVENT_QUIESCE:
+ if (ops->freeze_noirq) {
+ error = ops->freeze_noirq(dev);
+ suspend_report_result(ops->freeze_noirq, error);
+ }
+ break;
+ case PM_EVENT_HIBERNATE:
+ if (ops->poweroff_noirq) {
+ error = ops->poweroff_noirq(dev);
+ suspend_report_result(ops->poweroff_noirq, error);
+ }
+ break;
+ case PM_EVENT_THAW:
+ case PM_EVENT_RECOVER:
+ if (ops->thaw_noirq) {
+ error = ops->thaw_noirq(dev);
+ suspend_report_result(ops->thaw_noirq, error);
+ }
+ break;
+ case PM_EVENT_RESTORE:
+ if (ops->restore_noirq) {
+ error = ops->restore_noirq(dev);
+ suspend_report_result(ops->restore_noirq, error);
+ }
+ break;
+#endif /* CONFIG_HIBERNATION */
+ default:
+ error = -EINVAL;
+ }
+ return error;
+}
+
+static char *pm_verb(int event)
+{
+ switch (event) {
+ case PM_EVENT_SUSPEND:
+ return "suspend";
+ case PM_EVENT_RESUME:
+ return "resume";
+ case PM_EVENT_FREEZE:
+ return "freeze";
+ case PM_EVENT_QUIESCE:
+ return "quiesce";
+ case PM_EVENT_HIBERNATE:
+ return "hibernate";
+ case PM_EVENT_THAW:
+ return "thaw";
+ case PM_EVENT_RESTORE:
+ return "restore";
+ case PM_EVENT_RECOVER:
+ return "recover";
+ default:
+ return "(unknown PM event)";
+ }
+}
+
+static void pm_dev_dbg(struct device *dev, pm_message_t state, char *info)
+{
+ dev_dbg(dev, "%s%s%s\n", info, pm_verb(state.event),
+ ((state.event & PM_EVENT_SLEEP) && device_may_wakeup(dev)) ?
+ ", may wakeup" : "");
+}
+
+static void pm_dev_err(struct device *dev, pm_message_t state, char *info,
+ int error)
+{
+ printk(KERN_ERR "PM: Device %s failed to %s%s: error %d\n",
+ kobject_name(&dev->kobj), pm_verb(state.event), info, error);
+}
+
/*------------------------- Resume routines -------------------------*/
/**
- * resume_device_early - Power on one device (early resume).
+ * resume_device_noirq - Power on one device (early resume).
* @dev: Device.
+ * @state: PM transition of the system being carried out.
*
* Must be called with interrupts disabled.
*/
-static int resume_device_early(struct device *dev)
+static int resume_device_noirq(struct device *dev, pm_message_t state)
{
int error = 0;
TRACE_DEVICE(dev);
TRACE_RESUME(0);
- if (dev->bus && dev->bus->resume_early) {
- dev_dbg(dev, "EARLY resume\n");
+ if (!dev->bus)
+ goto End;
+
+ if (dev->bus->pm) {
+ pm_dev_dbg(dev, state, "EARLY ");
+ error = pm_noirq_op(dev, dev->bus->pm, state);
+ } else if (dev->bus->resume_early) {
+ pm_dev_dbg(dev, state, "legacy EARLY ");
error = dev->bus->resume_early(dev);
}
-
+ End:
TRACE_RESUME(error);
return error;
}
/**
* dpm_power_up - Power on all regular (non-sysdev) devices.
+ * @state: PM transition of the system being carried out.
*
- * Walk the dpm_off_irq list and power each device up. This
- * is used for devices that required they be powered down with
- * interrupts disabled. As devices are powered on, they are moved
- * to the dpm_off list.
+ * Execute the appropriate "noirq resume" callback for all devices marked
+ * as DPM_OFF_IRQ.
*
* Must be called with interrupts disabled and only one CPU running.
*/
-static void dpm_power_up(void)
+static void dpm_power_up(pm_message_t state)
{
+ struct device *dev;
- while (!list_empty(&dpm_off_irq)) {
- struct list_head *entry = dpm_off_irq.next;
- struct device *dev = to_device(entry);
+ list_for_each_entry(dev, &dpm_list, power.entry)
+ if (dev->power.status > DPM_OFF) {
+ int error;
- list_move_tail(entry, &dpm_off);
- resume_device_early(dev);
- }
+ dev->power.status = DPM_OFF;
+ error = resume_device_noirq(dev, state);
+ if (error)
+ pm_dev_err(dev, state, " early", error);
+ }
}
/**
* device_power_up - Turn on all devices that need special attention.
+ * @state: PM transition of the system being carried out.
*
* Power on system devices, then devices that required we shut them down
* with interrupts disabled.
*
* Must be called with interrupts disabled.
*/
-void device_power_up(void)
+void device_power_up(pm_message_t state)
{
sysdev_resume();
- dpm_power_up();
+ dpm_power_up(state);
}
EXPORT_SYMBOL_GPL(device_power_up);
/**
* resume_device - Restore state for one device.
* @dev: Device.
- *
+ * @state: PM transition of the system being carried out.
*/
-static int resume_device(struct device *dev)
+static int resume_device(struct device *dev, pm_message_t state)
{
int error = 0;
@@ -175,21 +360,40 @@ static int resume_device(struct device *dev)
down(&dev->sem);
- if (dev->bus && dev->bus->resume) {
- dev_dbg(dev,"resuming\n");
- error = dev->bus->resume(dev);
+ if (dev->bus) {
+ if (dev->bus->pm) {
+ pm_dev_dbg(dev, state, "");
+ error = pm_op(dev, &dev->bus->pm->base, state);
+ } else if (dev->bus->resume) {
+ pm_dev_dbg(dev, state, "legacy ");
+ error = dev->bus->resume(dev);
+ }
+ if (error)
+ goto End;
}
- if (!error && dev->type && dev->type->resume) {
- dev_dbg(dev,"resuming\n");
- error = dev->type->resume(dev);
+ if (dev->type) {
+ if (dev->type->pm) {
+ pm_dev_dbg(dev, state, "type ");
+ error = pm_op(dev, dev->type->pm, state);
+ } else if (dev->type->resume) {
+ pm_dev_dbg(dev, state, "legacy type ");
+ error = dev->type->resume(dev);
+ }
+ if (error)
+ goto End;
}
- if (!error && dev->class && dev->class->resume) {
- dev_dbg(dev,"class resume\n");
- error = dev->class->resume(dev);
+ if (dev->class) {
+ if (dev->class->pm) {
+ pm_dev_dbg(dev, state, "class ");
+ error = pm_op(dev, dev->class->pm, state);
+ } else if (dev->class->resume) {
+ pm_dev_dbg(dev, state, "legacy class ");
+ error = dev->class->resume(dev);
+ }
}
-
+ End:
up(&dev->sem);
TRACE_RESUME(error);
@@ -198,78 +402,161 @@ static int resume_device(struct device *dev)
/**
* dpm_resume - Resume every device.
+ * @state: PM transition of the system being carried out.
*
- * Resume the devices that have either not gone through
- * the late suspend, or that did go through it but also
- * went through the early resume.
+ * Execute the appropriate "resume" callback for all devices the status of
+ * which indicates that they are inactive.
+ */
+static void dpm_resume(pm_message_t state)
+{
+ struct list_head list;
+
+ INIT_LIST_HEAD(&list);
+ mutex_lock(&dpm_list_mtx);
+ transition_started = false;
+ while (!list_empty(&dpm_list)) {
+ struct device *dev = to_device(dpm_list.next);
+
+ get_device(dev);
+ if (dev->power.status >= DPM_OFF) {
+ int error;
+
+ dev->power.status = DPM_RESUMING;
+ mutex_unlock(&dpm_list_mtx);
+
+ error = resume_device(dev, state);
+
+ mutex_lock(&dpm_list_mtx);
+ if (error)
+ pm_dev_err(dev, state, "", error);
+ } else if (dev->power.status == DPM_SUSPENDING) {
+ /* Allow new children of the device to be registered */
+ dev->power.status = DPM_RESUMING;
+ }
+ if (!list_empty(&dev->power.entry))
+ list_move_tail(&dev->power.entry, &list);
+ put_device(dev);
+ }
+ list_splice(&list, &dpm_list);
+ mutex_unlock(&dpm_list_mtx);
+}
+
+/**
+ * complete_device - Complete a PM transition for given device
+ * @dev: Device.
+ * @state: PM transition of the system being carried out.
+ */
+static void complete_device(struct device *dev, pm_message_t state)
+{
+ down(&dev->sem);
+
+ if (dev->class && dev->class->pm && dev->class->pm->complete) {
+ pm_dev_dbg(dev, state, "completing class ");
+ dev->class->pm->complete(dev);
+ }
+
+ if (dev->type && dev->type->pm && dev->type->pm->complete) {
+ pm_dev_dbg(dev, state, "completing type ");
+ dev->type->pm->complete(dev);
+ }
+
+ if (dev->bus && dev->bus->pm && dev->bus->pm->base.complete) {
+ pm_dev_dbg(dev, state, "completing ");
+ dev->bus->pm->base.complete(dev);
+ }
+
+ up(&dev->sem);
+}
+
+/**
+ * dpm_complete - Complete a PM transition for all devices.
+ * @state: PM transition of the system being carried out.
*
- * Take devices from the dpm_off_list, resume them,
- * and put them on the dpm_locked list.
+ * Execute the ->complete() callbacks for all devices that are not marked
+ * as DPM_ON.
*/
-static void dpm_resume(void)
+static void dpm_complete(pm_message_t state)
{
+ struct list_head list;
+
+ INIT_LIST_HEAD(&list);
mutex_lock(&dpm_list_mtx);
- all_sleeping = false;
- while(!list_empty(&dpm_off)) {
- struct list_head *entry = dpm_off.next;
- struct device *dev = to_device(entry);
+ while (!list_empty(&dpm_list)) {
+ struct device *dev = to_device(dpm_list.prev);
- list_move_tail(entry, &dpm_active);
- dev->power.sleeping = false;
- mutex_unlock(&dpm_list_mtx);
- resume_device(dev);
- mutex_lock(&dpm_list_mtx);
+ get_device(dev);
+ if (dev->power.status > DPM_ON) {
+ dev->power.status = DPM_ON;
+ mutex_unlock(&dpm_list_mtx);
+
+ complete_device(dev, state);
+
+ mutex_lock(&dpm_list_mtx);
+ }
+ if (!list_empty(&dev->power.entry))
+ list_move(&dev->power.entry, &list);
+ put_device(dev);
}
+ list_splice(&list, &dpm_list);
mutex_unlock(&dpm_list_mtx);
}
/**
* device_resume - Restore state of each device in system.
+ * @state: PM transition of the system being carried out.
*
* Resume all the devices, unlock them all, and allow new
* devices to be registered once again.
*/
-void device_resume(void)
+void device_resume(pm_message_t state)
{
might_sleep();
- dpm_resume();
+ dpm_resume(state);
+ dpm_complete(state);
}
EXPORT_SYMBOL_GPL(device_resume);
/*------------------------- Suspend routines -------------------------*/
-static inline char *suspend_verb(u32 event)
+/**
+ * resume_event - return a PM message representing the resume event
+ * corresponding to given sleep state.
+ * @sleep_state: PM message representing a sleep state.
+ */
+static pm_message_t resume_event(pm_message_t sleep_state)
{
- switch (event) {
- case PM_EVENT_SUSPEND: return "suspend";
- case PM_EVENT_FREEZE: return "freeze";
- case PM_EVENT_PRETHAW: return "prethaw";
- default: return "(unknown suspend event)";
+ switch (sleep_state.event) {
+ case PM_EVENT_SUSPEND:
+ return PMSG_RESUME;
+ case PM_EVENT_FREEZE:
+ case PM_EVENT_QUIESCE:
+ return PMSG_RECOVER;
+ case PM_EVENT_HIBERNATE:
+ return PMSG_RESTORE;
}
-}
-
-static void
-suspend_device_dbg(struct device *dev, pm_message_t state, char *info)
-{
- dev_dbg(dev, "%s%s%s\n", info, suspend_verb(state.event),
- ((state.event == PM_EVENT_SUSPEND) && device_may_wakeup(dev)) ?
- ", may wakeup" : "");
+ return PMSG_ON;
}
/**
- * suspend_device_late - Shut down one device (late suspend).
+ * suspend_device_noirq - Shut down one device (late suspend).
* @dev: Device.
- * @state: Power state device is entering.
+ * @state: PM transition of the system being carried out.
*
* This is called with interrupts off and only a single CPU running.
*/
-static int suspend_device_late(struct device *dev, pm_message_t state)
+static int suspend_device_noirq(struct device *dev, pm_message_t state)
{
int error = 0;
- if (dev->bus && dev->bus->suspend_late) {
- suspend_device_dbg(dev, state, "LATE ");
+ if (!dev->bus)
+ return 0;
+
+ if (dev->bus->pm) {
+ pm_dev_dbg(dev, state, "LATE ");
+ error = pm_noirq_op(dev, dev->bus->pm, state);
+ } else if (dev->bus->suspend_late) {
+ pm_dev_dbg(dev, state, "legacy LATE ");
error = dev->bus->suspend_late(dev, state);
suspend_report_result(dev->bus->suspend_late, error);
}
@@ -278,37 +565,30 @@ static int suspend_device_late(struct device *dev, pm_message_t state)
/**
* device_power_down - Shut down special devices.
- * @state: Power state to enter.
+ * @state: PM transition of the system being carried out.
*
- * Power down devices that require interrupts to be disabled
- * and move them from the dpm_off list to the dpm_off_irq list.
+ * Power down devices that require interrupts to be disabled.
* Then power down system devices.
*
* Must be called with interrupts disabled and only one CPU running.
*/
int device_power_down(pm_message_t state)
{
+ struct device *dev;
int error = 0;
- while (!list_empty(&dpm_off)) {
- struct list_head *entry = dpm_off.prev;
- struct device *dev = to_device(entry);
-
- error = suspend_device_late(dev, state);
+ list_for_each_entry_reverse(dev, &dpm_list, power.entry) {
+ error = suspend_device_noirq(dev, state);
if (error) {
- printk(KERN_ERR "Could not power down device %s: "
- "error %d\n",
- kobject_name(&dev->kobj), error);
+ pm_dev_err(dev, state, " late", error);
break;
}
- if (!list_empty(&dev->power.entry))
- list_move(&dev->power.entry, &dpm_off_irq);
+ dev->power.status = DPM_OFF_IRQ;
}
-
if (!error)
error = sysdev_suspend(state);
if (error)
- dpm_power_up();
+ dpm_power_up(resume_event(state));
return error;
}
EXPORT_SYMBOL_GPL(device_power_down);
@@ -316,7 +596,7 @@ EXPORT_SYMBOL_GPL(device_power_down);
/**
* suspend_device - Save state of one device.
* @dev: Device.
- * @state: Power state device is entering.
+ * @state: PM transition of the system being carried out.
*/
static int suspend_device(struct device *dev, pm_message_t state)
{
@@ -324,24 +604,43 @@ static int suspend_device(struct device *dev, pm_message_t state)
down(&dev->sem);
- if (dev->class && dev->class->suspend) {
- suspend_device_dbg(dev, state, "class ");
- error = dev->class->suspend(dev, state);
- suspend_report_result(dev->class->suspend, error);
+ if (dev->class) {
+ if (dev->class->pm) {
+ pm_dev_dbg(dev, state, "class ");
+ error = pm_op(dev, dev->class->pm, state);
+ } else if (dev->class->suspend) {
+ pm_dev_dbg(dev, state, "legacy class ");
+ error = dev->class->suspend(dev, state);
+ suspend_report_result(dev->class->suspend, error);
+ }
+ if (error)
+ goto End;
}
- if (!error && dev->type && dev->type->suspend) {
- suspend_device_dbg(dev, state, "type ");
- error = dev->type->suspend(dev, state);
- suspend_report_result(dev->type->suspend, error);
+ if (dev->type) {
+ if (dev->type->pm) {
+ pm_dev_dbg(dev, state, "type ");
+ error = pm_op(dev, dev->type->pm, state);
+ } else if (dev->type->suspend) {
+ pm_dev_dbg(dev, state, "legacy type ");
+ error = dev->type->suspend(dev, state);
+ suspend_report_result(dev->type->suspend, error);
+ }
+ if (error)
+ goto End;
}
- if (!error && dev->bus && dev->bus->suspend) {
- suspend_device_dbg(dev, state, "");
- error = dev->bus->suspend(dev, state);
- suspend_report_result(dev->bus->suspend, error);
+ if (dev->bus) {
+ if (dev->bus->pm) {
+ pm_dev_dbg(dev, state, "");
+ error = pm_op(dev, &dev->bus->pm->base, state);
+ } else if (dev->bus->suspend) {
+ pm_dev_dbg(dev, state, "legacy ");
+ error = dev->bus->suspend(dev, state);
+ suspend_report_result(dev->bus->suspend, error);
+ }
}
-
+ End:
up(&dev->sem);
return error;
@@ -349,67 +648,139 @@ static int suspend_device(struct device *dev, pm_message_t state)
/**
* dpm_suspend - Suspend every device.
- * @state: Power state to put each device in.
- *
- * Walk the dpm_locked list. Suspend each device and move it
- * to the dpm_off list.
+ * @state: PM transition of the system being carried out.
*
- * (For historical reasons, if it returns -EAGAIN, that used to mean
- * that the device would be called again with interrupts disabled.
- * These days, we use the "suspend_late()" callback for that, so we
- * print a warning and consider it an error).
+ * Execute the appropriate "suspend" callbacks for all devices.
*/
static int dpm_suspend(pm_message_t state)
{
+ struct list_head list;
int error = 0;
+ INIT_LIST_HEAD(&list);
mutex_lock(&dpm_list_mtx);
- while (!list_empty(&dpm_active)) {
- struct list_head *entry = dpm_active.prev;
- struct device *dev = to_device(entry);
+ while (!list_empty(&dpm_list)) {
+ struct device *dev = to_device(dpm_list.prev);
- WARN_ON(dev->parent && dev->parent->power.sleeping);
-
- dev->power.sleeping = true;
+ get_device(dev);
mutex_unlock(&dpm_list_mtx);
+
error = suspend_device(dev, state);
+
mutex_lock(&dpm_list_mtx);
if (error) {
- printk(KERN_ERR "Could not suspend device %s: "
- "error %d%s\n",
- kobject_name(&dev->kobj),
- error,
- (error == -EAGAIN ?
- " (please convert to suspend_late)" :
- ""));
- dev->power.sleeping = false;
+ pm_dev_err(dev, state, "", error);
+ put_device(dev);
break;
}
+ dev->power.status = DPM_OFF;
if (!list_empty(&dev->power.entry))
- list_move(&dev->power.entry, &dpm_off);
+ list_move(&dev->power.entry, &list);
+ put_device(dev);
}
- if (!error)
- all_sleeping = true;
+ list_splice(&list, dpm_list.prev);
mutex_unlock(&dpm_list_mtx);
+ return error;
+}
+
+/**
+ * prepare_device - Execute the ->prepare() callback(s) for given device.
+ * @dev: Device.
+ * @state: PM transition of the system being carried out.
+ */
+static int prepare_device(struct device *dev, pm_message_t state)
+{
+ int error = 0;
+
+ down(&dev->sem);
+
+ if (dev->bus && dev->bus->pm && dev->bus->pm->base.prepare) {
+ pm_dev_dbg(dev, state, "preparing ");
+ error = dev->bus->pm->base.prepare(dev);
+ suspend_report_result(dev->bus->pm->base.prepare, error);
+ if (error)
+ goto End;
+ }
+
+ if (dev->type && dev->type->pm && dev->type->pm->prepare) {
+ pm_dev_dbg(dev, state, "preparing type ");
+ error = dev->type->pm->prepare(dev);
+ suspend_report_result(dev->type->pm->prepare, error);
+ if (error)
+ goto End;
+ }
+
+ if (dev->class && dev->class->pm && dev->class->pm->prepare) {
+ pm_dev_dbg(dev, state, "preparing class ");
+ error = dev->class->pm->prepare(dev);
+ suspend_report_result(dev->class->pm->prepare, error);
+ }
+ End:
+ up(&dev->sem);
+
+ return error;
+}
+
+/**
+ * dpm_prepare - Prepare all devices for a PM transition.
+ * @state: PM transition of the system being carried out.
+ *
+ * Execute the ->prepare() callback for all devices.
+ */
+static int dpm_prepare(pm_message_t state)
+{
+ struct list_head list;
+ int error = 0;
+
+ INIT_LIST_HEAD(&list);
+ mutex_lock(&dpm_list_mtx);
+ transition_started = true;
+ while (!list_empty(&dpm_list)) {
+ struct device *dev = to_device(dpm_list.next);
+
+ get_device(dev);
+ dev->power.status = DPM_PREPARING;
+ mutex_unlock(&dpm_list_mtx);
+ error = prepare_device(dev, state);
+
+ mutex_lock(&dpm_list_mtx);
+ if (error) {
+ dev->power.status = DPM_ON;
+ if (error == -EAGAIN) {
+ put_device(dev);
+ continue;
+ }
+ printk(KERN_ERR "PM: Failed to prepare device %s "
+ "for power transition: error %d\n",
+ kobject_name(&dev->kobj), error);
+ put_device(dev);
+ break;
+ }
+ dev->power.status = DPM_SUSPENDING;
+ if (!list_empty(&dev->power.entry))
+ list_move_tail(&dev->power.entry, &list);
+ put_device(dev);
+ }
+ list_splice(&list, &dpm_list);
+ mutex_unlock(&dpm_list_mtx);
return error;
}
/**
* device_suspend - Save state and stop all devices in system.
- * @state: new power management state
+ * @state: PM transition of the system being carried out.
*
- * Prevent new devices from being registered, then lock all devices
- * and suspend them.
+ * Prepare and suspend all devices.
*/
int device_suspend(pm_message_t state)
{
int error;
might_sleep();
- error = dpm_suspend(state);
- if (error)
- device_resume();
+ error = dpm_prepare(state);
+ if (!error)
+ error = dpm_suspend(state);
return error;
}
EXPORT_SYMBOL_GPL(device_suspend);
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index a6894f2a4b9..a3252c0e288 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -4,7 +4,7 @@
* main.c
*/
-extern struct list_head dpm_active; /* The active device list */
+extern struct list_head dpm_list; /* The active device list */
static inline struct device *to_device(struct list_head *entry)
{
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index d11f74b038d..596aeecfdff 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -6,9 +6,6 @@
#include <linux/string.h>
#include "power.h"
-int (*platform_enable_wakeup)(struct device *dev, int is_on);
-
-
/*
* wakeup - Report/change current wakeup option for device
*
diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c
index 87a7f1d0257..9b1b20b59e0 100644
--- a/drivers/base/power/trace.c
+++ b/drivers/base/power/trace.c
@@ -188,9 +188,9 @@ static int show_file_hash(unsigned int value)
static int show_dev_hash(unsigned int value)
{
int match = 0;
- struct list_head * entry = dpm_active.prev;
+ struct list_head *entry = dpm_list.prev;
- while (entry != &dpm_active) {
+ while (entry != &dpm_list) {
struct device * dev = to_device(entry);
unsigned int hash = hash_string(DEVSEED, dev->bus_id, DEVHASH);
if (hash == value) {
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 4d1ce2e7361..7d63f8ced24 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -2,7 +2,7 @@
# Makefile for the PCI bus specific drivers.
#
-obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \
+obj-y += access.o bus.o probe.o remove.o pci.o quirks.o slot.o \
pci-driver.o search.o pci-sysfs.o rom.o setup-res.o
obj-$(CONFIG_PROC_FS) += proc.o
diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index f8c187a763b..93e37f0666a 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -30,6 +30,7 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
+#include <linux/pci-acpi.h>
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/actypes.h>
@@ -299,7 +300,7 @@ free_and_return:
*
* @handle - the handle of the hotplug controller.
*/
-acpi_status acpi_run_oshp(acpi_handle handle)
+static acpi_status acpi_run_oshp(acpi_handle handle)
{
acpi_status status;
struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -322,9 +323,6 @@ acpi_status acpi_run_oshp(acpi_handle handle)
kfree(string.pointer);
return status;
}
-EXPORT_SYMBOL_GPL(acpi_run_oshp);
-
-
/* acpi_get_hp_params_from_firmware
*
@@ -374,6 +372,85 @@ acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
}
EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);
+/**
+ * acpi_get_hp_hw_control_from_firmware
+ * @dev: the pci_dev of the bridge that has a hotplug controller
+ * @flags: requested control bits for _OSC
+ *
+ * Attempt to take hotplug control from firmware.
+ */
+int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
+{
+ acpi_status status;
+ acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
+ struct pci_dev *pdev = dev;
+ struct pci_bus *parent;
+ struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
+
+ flags &= (OSC_PCI_EXPRESS_NATIVE_HP_CONTROL |
+ OSC_SHPC_NATIVE_HP_CONTROL |
+ OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+ if (!flags) {
+ err("Invalid flags %u specified!\n", flags);
+ return -EINVAL;
+ }
+
+ /*
+ * Per PCI firmware specification, we should run the ACPI _OSC
+ * method to get control of hotplug hardware before using it. If
+ * an _OSC is missing, we look for an OSHP to do the same thing.
+ * To handle different BIOS behavior, we look for _OSC and OSHP
+ * within the scope of the hotplug controller and its parents,
+ * upto the host bridge under which this controller exists.
+ */
+ while (!handle) {
+ /*
+ * This hotplug controller was not listed in the ACPI name
+ * space at all. Try to get acpi handle of parent pci bus.
+ */
+ if (!pdev || !pdev->bus->parent)
+ break;
+ parent = pdev->bus->parent;
+ dbg("Could not find %s in acpi namespace, trying parent\n",
+ pci_name(pdev));
+ if (!parent->self)
+ /* Parent must be a host bridge */
+ handle = acpi_get_pci_rootbridge_handle(
+ pci_domain_nr(parent),
+ parent->number);
+ else
+ handle = DEVICE_ACPI_HANDLE(&(parent->self->dev));
+ pdev = parent->self;
+ }
+
+ while (handle) {
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
+ dbg("Trying to get hotplug control for %s \n",
+ (char *)string.pointer);
+ status = pci_osc_control_set(handle, flags);
+ if (status == AE_NOT_FOUND)
+ status = acpi_run_oshp(handle);
+ if (ACPI_SUCCESS(status)) {
+ dbg("Gained control for hotplug HW for pci %s (%s)\n",
+ pci_name(dev), (char *)string.pointer);
+ kfree(string.pointer);
+ return 0;
+ }
+ if (acpi_root_bridge(handle))
+ break;
+ chandle = handle;
+ status = acpi_get_parent(chandle, &handle);
+ if (ACPI_FAILURE(status))
+ break;
+ }
+
+ dbg("Cannot get control of hotplug hardware for pci %s\n",
+ pci_name(dev));
+
+ kfree(string.pointer);
+ return -ENODEV;
+}
+EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware);
/* acpi_root_bridge - check to see if this acpi object is a root bridge
*
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index 7a29164d4b3..eecf7cbf413 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -215,7 +215,6 @@ extern u8 acpiphp_get_power_status (struct acpiphp_slot *slot);
extern u8 acpiphp_get_attention_status (struct acpiphp_slot *slot);
extern u8 acpiphp_get_latch_status (struct acpiphp_slot *slot);
extern u8 acpiphp_get_adapter_status (struct acpiphp_slot *slot);
-extern u32 acpiphp_get_address (struct acpiphp_slot *slot);
/* variables */
extern int acpiphp_debug;
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 7af68ba2790..0e496e866a8 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -70,7 +70,6 @@ static int disable_slot (struct hotplug_slot *slot);
static int set_attention_status (struct hotplug_slot *slot, u8 value);
static int get_power_status (struct hotplug_slot *slot, u8 *value);
static int get_attention_status (struct hotplug_slot *slot, u8 *value);
-static int get_address (struct hotplug_slot *slot, u32 *value);
static int get_latch_status (struct hotplug_slot *slot, u8 *value);
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
@@ -83,7 +82,6 @@ static struct hotplug_slot_ops acpi_hotplug_slot_ops = {
.get_attention_status = get_attention_status,
.get_latch_status = get_latch_status,
.get_adapter_status = get_adapter_status,
- .get_address = get_address,
};
@@ -274,23 +272,6 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
return 0;
}
-
-/**
- * get_address - get pci address of a slot
- * @hotplug_slot: slot to get status
- * @value: pointer to struct pci_busdev (seg, bus, dev)
- */
-static int get_address(struct hotplug_slot *hotplug_slot, u32 *value)
-{
- struct slot *slot = hotplug_slot->private;
-
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
-
- *value = acpiphp_get_address(slot->acpi_slot);
-
- return 0;
-}
-
static int __init init_acpi(void)
{
int retval;
@@ -357,7 +338,11 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
acpiphp_slot->slot = slot;
snprintf(slot->name, sizeof(slot->name), "%u", slot->acpi_slot->sun);
- retval = pci_hp_register(slot->hotplug_slot);
+ retval = pci_hp_register(slot->hotplug_slot,
+ acpiphp_slot->bridge->pci_bus,
+ acpiphp_slot->device);
+ if (retval == -EBUSY)
+ goto error_hpslot;
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
goto error_hpslot;
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 91156f85a92..a3e4705dd8f 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -258,7 +258,12 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
bridge->pci_bus->number, slot->device);
retval = acpiphp_register_hotplug_slot(slot);
if (retval) {
- warn("acpiphp_register_hotplug_slot failed(err code = 0x%x)\n", retval);
+ if (retval == -EBUSY)
+ warn("Slot %d already registered by another "
+ "hotplug driver\n", slot->sun);
+ else
+ warn("acpiphp_register_hotplug_slot failed "
+ "(err code = 0x%x)\n", retval);
goto err_exit;
}
}
@@ -1878,19 +1883,3 @@ u8 acpiphp_get_adapter_status(struct acpiphp_slot *slot)
return (sta == 0) ? 0 : 1;
}
-
-
-/*
- * pci address (seg/bus/dev)
- */
-u32 acpiphp_get_address(struct acpiphp_slot *slot)
-{
- u32 address;
- struct pci_bus *pci_bus = slot->bridge->pci_bus;
-
- address = (pci_domain_nr(pci_bus) << 16) |
- (pci_bus->number << 8) |
- slot->device;
-
- return address;
-}
diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c
index ede9051fdb5..2b7c45e3937 100644
--- a/drivers/pci/hotplug/acpiphp_ibm.c
+++ b/drivers/pci/hotplug/acpiphp_ibm.c
@@ -33,8 +33,10 @@
#include <linux/kobject.h>
#include <asm/uaccess.h>
#include <linux/moduleparam.h>
+#include <linux/pci.h>
#include "acpiphp.h"
+#include "../pci.h"
#define DRIVER_VERSION "1.0.1"
#define DRIVER_AUTHOR "Irene Zubarev <zubarev@us.ibm.com>, Vernon Mauery <vernux@us.ibm.com>"
@@ -430,7 +432,7 @@ static int __init ibm_acpiphp_init(void)
int retval = 0;
acpi_status status;
struct acpi_device *device;
- struct kobject *sysdir = &pci_hotplug_slots_kset->kobj;
+ struct kobject *sysdir = &pci_slots_kset->kobj;
dbg("%s\n", __func__);
@@ -477,7 +479,7 @@ init_return:
static void __exit ibm_acpiphp_exit(void)
{
acpi_status status;
- struct kobject *sysdir = &pci_hotplug_slots_kset->kobj;
+ struct kobject *sysdir = &pci_slots_kset->kobj;
dbg("%s\n", __func__);
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index d8a6b80ab42..935947991dc 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -285,7 +285,7 @@ cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last)
info->attention_status = cpci_get_attention_status(slot);
dbg("registering slot %s", slot->hotplug_slot->name);
- status = pci_hp_register(slot->hotplug_slot);
+ status = pci_hp_register(slot->hotplug_slot, bus, i);
if (status) {
err("pci_hp_register failed with error %d", status);
goto error_name;
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 36b115b27b0..54defec51d0 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -434,7 +434,9 @@ static int ctrl_slot_setup(struct controller *ctrl,
slot->bus, slot->device,
slot->number, ctrl->slot_device_offset,
slot_number);
- result = pci_hp_register(hotplug_slot);
+ result = pci_hp_register(hotplug_slot,
+ ctrl->pci_dev->subordinate,
+ slot->device);
if (result) {
err("pci_hp_register failed with error %d\n", result);
goto error_name;
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index 7e9a827c268..40337a06c18 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -66,6 +66,7 @@ struct dummy_slot {
struct pci_dev *dev;
struct work_struct remove_work;
unsigned long removed;
+ char name[8];
};
static int debug;
@@ -100,6 +101,7 @@ static int add_slot(struct pci_dev *dev)
struct dummy_slot *dslot;
struct hotplug_slot *slot;
int retval = -ENOMEM;
+ static int count = 1;
slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL);
if (!slot)
@@ -113,18 +115,18 @@ static int add_slot(struct pci_dev *dev)
slot->info->max_bus_speed = PCI_SPEED_UNKNOWN;
slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
- slot->name = &dev->dev.bus_id[0];
- dbg("slot->name = %s\n", slot->name);
-
dslot = kzalloc(sizeof(struct dummy_slot), GFP_KERNEL);
if (!dslot)
goto error_info;
+ slot->name = dslot->name;
+ snprintf(slot->name, sizeof(dslot->name), "fake%d", count++);
+ dbg("slot->name = %s\n", slot->name);
slot->ops = &dummy_hotplug_slot_ops;
slot->release = &dummy_release;
slot->private = dslot;
- retval = pci_hp_register(slot);
+ retval = pci_hp_register(slot, dev->bus, PCI_SLOT(dev->devfn));
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
goto error_dslot;
@@ -148,17 +150,17 @@ error:
static int __init pci_scan_buses(void)
{
struct pci_dev *dev = NULL;
- int retval = 0;
+ int lastslot = 0;
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
- retval = add_slot(dev);
- if (retval) {
- pci_dev_put(dev);
- break;
- }
+ if (PCI_FUNC(dev->devfn) > 0 &&
+ lastslot == PCI_SLOT(dev->devfn))
+ continue;
+ lastslot = PCI_SLOT(dev->devfn);
+ add_slot(dev);
}
- return retval;
+ return 0;
}
static void remove_slot(struct dummy_slot *dslot)
@@ -296,23 +298,9 @@ static int enable_slot(struct hotplug_slot *hotplug_slot)
return 0;
}
-/* find the hotplug_slot for the pci_dev */
-static struct hotplug_slot *get_slot_from_dev(struct pci_dev *dev)
-{
- struct dummy_slot *dslot;
-
- list_for_each_entry(dslot, &slot_list, node) {
- if (dslot->dev == dev)
- return dslot->slot;
- }
- return NULL;
-}
-
-
static int disable_slot(struct hotplug_slot *slot)
{
struct dummy_slot *dslot;
- struct hotplug_slot *hslot;
struct pci_dev *dev;
int func;
@@ -322,41 +310,27 @@ static int disable_slot(struct hotplug_slot *slot)
dbg("%s - physical_slot = %s\n", __func__, slot->name);
- /* don't disable bridged devices just yet, we can't handle them easily... */
- if (dslot->dev->subordinate) {
- err("Can't remove PCI devices with other PCI devices behind it yet.\n");
- return -ENODEV;
- }
- if (test_and_set_bit(0, &dslot->removed)) {
- dbg("Slot already scheduled for removal\n");
- return -ENODEV;
- }
- /* search for subfunctions and disable them first */
- if (!(dslot->dev->devfn & 7)) {
- for (func = 1; func < 8; func++) {
- dev = pci_get_slot(dslot->dev->bus,
- dslot->dev->devfn + func);
- if (dev) {
- hslot = get_slot_from_dev(dev);
- if (hslot)
- disable_slot(hslot);
- else {
- err("Hotplug slot not found for subfunction of PCI device\n");
- return -ENODEV;
- }
- pci_dev_put(dev);
- } else
- dbg("No device in slot found\n");
+ for (func = 7; func >= 0; func--) {
+ dev = pci_get_slot(dslot->dev->bus, dslot->dev->devfn + func);
+ if (!dev)
+ continue;
+
+ if (test_and_set_bit(0, &dslot->removed)) {
+ dbg("Slot already scheduled for removal\n");
+ return -ENODEV;
}
- }
- /* remove the device from the pci core */
- pci_remove_bus_device(dslot->dev);
+ /* queue work item to blow away this sysfs entry and other
+ * parts.
+ */
+ INIT_WORK(&dslot->remove_work, remove_slot_worker);
+ queue_work(dummyphp_wq, &dslot->remove_work);
- /* queue work item to blow away this sysfs entry and other parts. */
- INIT_WORK(&dslot->remove_work, remove_slot_worker);
- queue_work(dummyphp_wq, &dslot->remove_work);
+ /* blow away this sysfs entry and other parts. */
+ remove_slot(dslot);
+ pci_dev_put(dev);
+ }
return 0;
}
diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index dca7efc14be..8467d028732 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -1001,7 +1001,8 @@ static int __init ebda_rsrc_controller (void)
tmp_slot = list_entry (list, struct slot, ibm_slot_list);
snprintf (tmp_slot->hotplug_slot->name, 30, "%s", create_file_name (tmp_slot));
- pci_hp_register (tmp_slot->hotplug_slot);
+ pci_hp_register(tmp_slot->hotplug_slot,
+ pci_find_bus(0, tmp_slot->bus), tmp_slot->device);
}
print_ebda_hpc ();
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index a11021e8ce3..5f85b1b120e 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -40,6 +40,7 @@
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
#include <asm/uaccess.h>
+#include "../pci.h"
#define MY_NAME "pci_hotplug"
@@ -60,41 +61,7 @@ static int debug;
//////////////////////////////////////////////////////////////////
static LIST_HEAD(pci_hotplug_slot_list);
-
-struct kset *pci_hotplug_slots_kset;
-
-static ssize_t hotplug_slot_attr_show(struct kobject *kobj,
- struct attribute *attr, char *buf)
-{
- struct hotplug_slot *slot = to_hotplug_slot(kobj);
- struct hotplug_slot_attribute *attribute = to_hotplug_attr(attr);
- return attribute->show ? attribute->show(slot, buf) : -EIO;
-}
-
-static ssize_t hotplug_slot_attr_store(struct kobject *kobj,
- struct attribute *attr, const char *buf, size_t len)
-{
- struct hotplug_slot *slot = to_hotplug_slot(kobj);
- struct hotplug_slot_attribute *attribute = to_hotplug_attr(attr);
- return attribute->store ? attribute->store(slot, buf, len) : -EIO;
-}
-
-static struct sysfs_ops hotplug_slot_sysfs_ops = {
- .show = hotplug_slot_attr_show,
- .store = hotplug_slot_attr_store,
-};
-
-static void hotplug_slot_release(struct kobject *kobj)
-{
- struct hotplug_slot *slot = to_hotplug_slot(kobj);
- if (slot->release)
- slot->release(slot);
-}
-
-static struct kobj_type hotplug_slot_ktype = {
- .sysfs_ops = &hotplug_slot_sysfs_ops,
- .release = &hotplug_slot_release,
-};
+static DEFINE_SPINLOCK(pci_hotplug_slot_list_lock);
/* these strings match up with the values in pci_bus_speed */
static char *pci_bus_speed_strings[] = {
@@ -149,16 +116,15 @@ GET_STATUS(power_status, u8)
GET_STATUS(attention_status, u8)
GET_STATUS(latch_status, u8)
GET_STATUS(adapter_status, u8)
-GET_STATUS(address, u32)
GET_STATUS(max_bus_speed, enum pci_bus_speed)
GET_STATUS(cur_bus_speed, enum pci_bus_speed)
-static ssize_t power_read_file (struct hotplug_slot *slot, char *buf)
+static ssize_t power_read_file(struct pci_slot *slot, char *buf)
{
int retval;
u8 value;
- retval = get_power_status (slot, &value);
+ retval = get_power_status(slot->hotplug, &value);
if (retval)
goto exit;
retval = sprintf (buf, "%d\n", value);
@@ -166,9 +132,10 @@ exit:
return retval;
}
-static ssize_t power_write_file (struct hotplug_slot *slot, const char *buf,
+static ssize_t power_write_file(struct pci_slot *pci_slot, const char *buf,
size_t count)
{
+ struct hotplug_slot *slot = pci_slot->hotplug;
unsigned long lpower;
u8 power;
int retval = 0;
@@ -204,29 +171,30 @@ exit:
return count;
}
-static struct hotplug_slot_attribute hotplug_slot_attr_power = {
+static struct pci_slot_attribute hotplug_slot_attr_power = {
.attr = {.name = "power", .mode = S_IFREG | S_IRUGO | S_IWUSR},
.show = power_read_file,
.store = power_write_file
};
-static ssize_t attention_read_file (struct hotplug_slot *slot, char *buf)
+static ssize_t attention_read_file(struct pci_slot *slot, char *buf)
{
int retval;
u8 value;
- retval = get_attention_status (slot, &value);
+ retval = get_attention_status(slot->hotplug, &value);
if (retval)
goto exit;
- retval = sprintf (buf, "%d\n", value);
+ retval = sprintf(buf, "%d\n", value);
exit:
return retval;
}
-static ssize_t attention_write_file (struct hotplug_slot *slot, const char *buf,
+static ssize_t attention_write_file(struct pci_slot *slot, const char *buf,
size_t count)
{
+ struct hotplug_slot_ops *ops = slot->hotplug->ops;
unsigned long lattention;
u8 attention;
int retval = 0;
@@ -235,13 +203,13 @@ static ssize_t attention_write_file (struct hotplug_slot *slot, const char *buf,
attention = (u8)(lattention & 0xff);
dbg (" - attention = %d\n", attention);
- if (!try_module_get(slot->ops->owner)) {
+ if (!try_module_get(ops->owner)) {
retval = -ENODEV;
goto exit;
}
- if (slot->ops->set_attention_status)
- retval = slot->ops->set_attention_status(slot, attention);
- module_put(slot->ops->owner);
+ if (ops->set_attention_status)
+ retval = ops->set_attention_status(slot->hotplug, attention);
+ module_put(ops->owner);
exit:
if (retval)
@@ -249,18 +217,18 @@ exit:
return count;
}
-static struct hotplug_slot_attribute hotplug_slot_attr_attention = {
+static struct pci_slot_attribute hotplug_slot_attr_attention = {
.attr = {.name = "attention", .mode = S_IFREG | S_IRUGO | S_IWUSR},
.show = attention_read_file,
.store = attention_write_file
};
-static ssize_t latch_read_file (struct hotplug_slot *slot, char *buf)
+static ssize_t latch_read_file(struct pci_slot *slot, char *buf)
{
int retval;
u8 value;
- retval = get_latch_status (slot, &value);
+ retval = get_latch_status(slot->hotplug, &value);
if (retval)
goto exit;
retval = sprintf (buf, "%d\n", value);
@@ -269,17 +237,17 @@ exit:
return retval;
}
-static struct hotplug_slot_attribute hotplug_slot_attr_latch = {
+static struct pci_slot_attribute hotplug_slot_attr_latch = {
.attr = {.name = "latch", .mode = S_IFREG | S_IRUGO},
.show = latch_read_file,
};
-static ssize_t presence_read_file (struct hotplug_slot *slot, char *buf)
+static ssize_t presence_read_file(struct pci_slot *slot, char *buf)
{
int retval;
u8 value;
- retval = get_adapter_status (slot, &value);
+ retval = get_adapter_status(slot->hotplug, &value);
if (retval)
goto exit;
retval = sprintf (buf, "%d\n", value);
@@ -288,42 +256,20 @@ exit:
return retval;
}
-static struct hotplug_slot_attribute hotplug_slot_attr_presence = {
+static struct pci_slot_attribute hotplug_slot_attr_presence = {
.attr = {.name = "adapter", .mode = S_IFREG | S_IRUGO},
.show = presence_read_file,
};
-static ssize_t address_read_file (struct hotplug_slot *slot, char *buf)
-{
- int retval;
- u32 address;
-
- retval = get_address (slot, &address);
- if (retval)
- goto exit;
- retval = sprintf (buf, "%04x:%02x:%02x\n",
- (address >> 16) & 0xffff,
- (address >> 8) & 0xff,
- address & 0xff);
-
-exit:
- return retval;
-}
-
-static struct hotplug_slot_attribute hotplug_slot_attr_address = {
- .attr = {.name = "address", .mode = S_IFREG | S_IRUGO},
- .show = address_read_file,
-};
-
static char *unknown_speed = "Unknown bus speed";
-static ssize_t max_bus_speed_read_file (struct hotplug_slot *slot, char *buf)
+static ssize_t max_bus_speed_read_file(struct pci_slot *slot, char *buf)
{
char *speed_string;
int retval;
enum pci_bus_speed value;
- retval = get_max_bus_speed (slot, &value);
+ retval = get_max_bus_speed(slot->hotplug, &value);
if (retval)
goto exit;
@@ -338,18 +284,18 @@ exit:
return retval;
}
-static struct hotplug_slot_attribute hotplug_slot_attr_max_bus_speed = {
+static struct pci_slot_attribute hotplug_slot_attr_max_bus_speed = {
.attr = {.name = "max_bus_speed", .mode = S_IFREG | S_IRUGO},
.show = max_bus_speed_read_file,
};
-static ssize_t cur_bus_speed_read_file (struct hotplug_slot *slot, char *buf)
+static ssize_t cur_bus_speed_read_file(struct pci_slot *slot, char *buf)
{
char *speed_string;
int retval;
enum pci_bus_speed value;
- retval = get_cur_bus_speed (slot, &value);
+ retval = get_cur_bus_speed(slot->hotplug, &value);
if (retval)
goto exit;
@@ -364,14 +310,15 @@ exit:
return retval;
}
-static struct hotplug_slot_attribute hotplug_slot_attr_cur_bus_speed = {
+static struct pci_slot_attribute hotplug_slot_attr_cur_bus_speed = {
.attr = {.name = "cur_bus_speed", .mode = S_IFREG | S_IRUGO},
.show = cur_bus_speed_read_file,
};
-static ssize_t test_write_file (struct hotplug_slot *slot, const char *buf,
+static ssize_t test_write_file(struct pci_slot *pci_slot, const char *buf,
size_t count)
{
+ struct hotplug_slot *slot = pci_slot->hotplug;
unsigned long ltest;
u32 test;
int retval = 0;
@@ -394,13 +341,14 @@ exit:
return count;
}
-static struct hotplug_slot_attribute hotplug_slot_attr_test = {
+static struct pci_slot_attribute hotplug_slot_attr_test = {
.attr = {.name = "test", .mode = S_IFREG | S_IRUGO | S_IWUSR},
.store = test_write_file
};
-static int has_power_file (struct hotplug_slot *slot)
+static int has_power_file(struct pci_slot *pci_slot)
{
+ struct hotplug_slot *slot = pci_slot->hotplug;
if ((!slot) || (!slot->ops))
return -ENODEV;
if ((slot->ops->enable_slot) ||
@@ -410,8 +358,9 @@ static int has_power_file (struct hotplug_slot *slot)
return -ENOENT;
}
-static int has_attention_file (struct hotplug_slot *slot)
+static int has_attention_file(struct pci_slot *pci_slot)
{
+ struct hotplug_slot *slot = pci_slot->hotplug;
if ((!slot) || (!slot->ops))
return -ENODEV;
if ((slot->ops->set_attention_status) ||
@@ -420,8 +369,9 @@ static int has_attention_file (struct hotplug_slot *slot)
return -ENOENT;
}
-static int has_latch_file (struct hotplug_slot *slot)
+static int has_latch_file(struct pci_slot *pci_slot)
{
+ struct hotplug_slot *slot = pci_slot->hotplug;
if ((!slot) || (!slot->ops))
return -ENODEV;
if (slot->ops->get_latch_status)
@@ -429,8 +379,9 @@ static int has_latch_file (struct hotplug_slot *slot)
return -ENOENT;
}
-static int has_adapter_file (struct hotplug_slot *slot)
+static int has_adapter_file(struct pci_slot *pci_slot)
{
+ struct hotplug_slot *slot = pci_slot->hotplug;
if ((!slot) || (!slot->ops))
return -ENODEV;
if (slot->ops->get_adapter_status)
@@ -438,17 +389,9 @@ static int has_adapter_file (struct hotplug_slot *slot)
return -ENOENT;
}
-static int has_address_file (struct hotplug_slot *slot)
-{
- if ((!slot) || (!slot->ops))
- return -ENODEV;
- if (slot->ops->get_address)
- return 0;
- return -ENOENT;
-}
-
-static int has_max_bus_speed_file (struct hotplug_slot *slot)
+static int has_max_bus_speed_file(struct pci_slot *pci_slot)
{
+ struct hotplug_slot *slot = pci_slot->hotplug;
if ((!slot) || (!slot->ops))
return -ENODEV;
if (slot->ops->get_max_bus_speed)
@@ -456,8 +399,9 @@ static int has_max_bus_speed_file (struct hotplug_slot *slot)
return -ENOENT;
}
-static int has_cur_bus_speed_file (struct hotplug_slot *slot)
+static int has_cur_bus_speed_file(struct pci_slot *pci_slot)
{
+ struct hotplug_slot *slot = pci_slot->hotplug;
if ((!slot) || (!slot->ops))
return -ENODEV;
if (slot->ops->get_cur_bus_speed)
@@ -465,8 +409,9 @@ static int has_cur_bus_speed_file (struct hotplug_slot *slot)
return -ENOENT;
}
-static int has_test_file (struct hotplug_slot *slot)
+static int has_test_file(struct pci_slot *pci_slot)
{
+ struct hotplug_slot *slot = pci_slot->hotplug;
if ((!slot) || (!slot->ops))
return -ENODEV;
if (slot->ops->hardware_test)
@@ -474,7 +419,7 @@ static int has_test_file (struct hotplug_slot *slot)
return -ENOENT;
}
-static int fs_add_slot (struct hotplug_slot *slot)
+static int fs_add_slot(struct pci_slot *slot)
{
int retval = 0;
@@ -505,13 +450,6 @@ static int fs_add_slot (struct hotplug_slot *slot)
goto exit_adapter;
}
- if (has_address_file(slot) == 0) {
- retval = sysfs_create_file(&slot->kobj,
- &hotplug_slot_attr_address.attr);
- if (retval)
- goto exit_address;
- }
-
if (has_max_bus_speed_file(slot) == 0) {
retval = sysfs_create_file(&slot->kobj,
&hotplug_slot_attr_max_bus_speed.attr);
@@ -544,10 +482,6 @@ exit_cur_speed:
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr);
exit_max_speed:
- if (has_address_file(slot) == 0)
- sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_address.attr);
-
-exit_address:
if (has_adapter_file(slot) == 0)
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr);
@@ -567,7 +501,7 @@ exit:
return retval;
}
-static void fs_remove_slot (struct hotplug_slot *slot)
+static void fs_remove_slot(struct pci_slot *slot)
{
if (has_power_file(slot) == 0)
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_power.attr);
@@ -581,9 +515,6 @@ static void fs_remove_slot (struct hotplug_slot *slot)
if (has_adapter_file(slot) == 0)
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr);
- if (has_address_file(slot) == 0)
- sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_address.attr);
-
if (has_max_bus_speed_file(slot) == 0)
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr);
@@ -599,27 +530,33 @@ static struct hotplug_slot *get_slot_from_name (const char *name)
struct hotplug_slot *slot;
struct list_head *tmp;
+ spin_lock(&pci_hotplug_slot_list_lock);
list_for_each (tmp, &pci_hotplug_slot_list) {
slot = list_entry (tmp, struct hotplug_slot, slot_list);
if (strcmp(slot->name, name) == 0)
- return slot;
+ goto out;
}
- return NULL;
+ slot = NULL;
+out:
+ spin_unlock(&pci_hotplug_slot_list_lock);
+ return slot;
}
/**
* pci_hp_register - register a hotplug_slot with the PCI hotplug subsystem
+ * @bus: bus this slot is on
* @slot: pointer to the &struct hotplug_slot to register
+ * @slot_nr: slot number
*
* Registers a hotplug slot with the pci hotplug subsystem, which will allow
* userspace interaction to the slot.
*
* Returns 0 if successful, anything else for an error.
*/
-int pci_hp_register (struct hotplug_slot *slot)
+int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr)
{
int result;
- struct hotplug_slot *tmp;
+ struct pci_slot *pci_slot;
if (slot == NULL)
return -ENODEV;
@@ -632,57 +569,89 @@ int pci_hp_register (struct hotplug_slot *slot)
}
/* Check if we have already registered a slot with the same name. */
- tmp = get_slot_from_name(slot->name);
- if (tmp)
+ if (get_slot_from_name(slot->name))
return -EEXIST;
- slot->kobj.kset = pci_hotplug_slots_kset;
- result = kobject_init_and_add(&slot->kobj, &hotplug_slot_ktype, NULL,
- "%s", slot->name);
- if (result) {
- err("Unable to register kobject '%s'", slot->name);
- return -EINVAL;
+ /*
+ * No problems if we call this interface from both ACPI_PCI_SLOT
+ * driver and call it here again. If we've already created the
+ * pci_slot, the interface will simply bump the refcount.
+ */
+ pci_slot = pci_create_slot(bus, slot_nr, slot->name);
+ if (IS_ERR(pci_slot))
+ return PTR_ERR(pci_slot);
+
+ if (pci_slot->hotplug) {
+ dbg("%s: already claimed\n", __func__);
+ pci_destroy_slot(pci_slot);
+ return -EBUSY;
}
- list_add (&slot->slot_list, &pci_hotplug_slot_list);
+ slot->pci_slot = pci_slot;
+ pci_slot->hotplug = slot;
+
+ /*
+ * Allow pcihp drivers to override the ACPI_PCI_SLOT name.
+ */
+ if (strcmp(kobject_name(&pci_slot->kobj), slot->name)) {
+ result = kobject_rename(&pci_slot->kobj, slot->name);
+ if (result) {
+ pci_destroy_slot(pci_slot);
+ return result;
+ }
+ }
+
+ spin_lock(&pci_hotplug_slot_list_lock);
+ list_add(&slot->slot_list, &pci_hotplug_slot_list);
+ spin_unlock(&pci_hotplug_slot_list_lock);
+
+ result = fs_add_slot(pci_slot);
+ kobject_uevent(&pci_slot->kobj, KOBJ_ADD);
+ dbg("Added slot %s to the list\n", slot->name);
+
- result = fs_add_slot (slot);
- kobject_uevent(&slot->kobj, KOBJ_ADD);
- dbg ("Added slot %s to the list\n", slot->name);
return result;
}
/**
* pci_hp_deregister - deregister a hotplug_slot with the PCI hotplug subsystem
- * @slot: pointer to the &struct hotplug_slot to deregister
+ * @hotplug: pointer to the &struct hotplug_slot to deregister
*
* The @slot must have been registered with the pci hotplug subsystem
* previously with a call to pci_hp_register().
*
* Returns 0 if successful, anything else for an error.
*/
-int pci_hp_deregister (struct hotplug_slot *slot)
+int pci_hp_deregister(struct hotplug_slot *hotplug)
{
struct hotplug_slot *temp;
+ struct pci_slot *slot;
- if (slot == NULL)
+ if (!hotplug)
return -ENODEV;
- temp = get_slot_from_name (slot->name);
- if (temp != slot) {
+ temp = get_slot_from_name(hotplug->name);
+ if (temp != hotplug)
return -ENODEV;
- }
- list_del (&slot->slot_list);
- fs_remove_slot (slot);
- dbg ("Removed slot %s from the list\n", slot->name);
- kobject_put(&slot->kobj);
+ spin_lock(&pci_hotplug_slot_list_lock);
+ list_del(&hotplug->slot_list);
+ spin_unlock(&pci_hotplug_slot_list_lock);
+
+ slot = hotplug->pci_slot;
+ fs_remove_slot(slot);
+ dbg("Removed slot %s from the list\n", hotplug->name);
+
+ hotplug->release(hotplug);
+ slot->hotplug = NULL;
+ pci_destroy_slot(slot);
+
return 0;
}
/**
* pci_hp_change_slot_info - changes the slot's information structure in the core
- * @slot: pointer to the slot whose info has changed
+ * @hotplug: pointer to the slot whose info has changed
* @info: pointer to the info copy into the slot's info structure
*
* @slot must have been registered with the pci
@@ -690,13 +659,15 @@ int pci_hp_deregister (struct hotplug_slot *slot)
*
* Returns 0 if successful, anything else for an error.
*/
-int __must_check pci_hp_change_slot_info(struct hotplug_slot *slot,
+int __must_check pci_hp_change_slot_info(struct hotplug_slot *hotplug,
struct hotplug_slot_info *info)
{
- if ((slot == NULL) || (info == NULL))
+ struct pci_slot *slot;
+ if (!hotplug || !info)
return -ENODEV;
+ slot = hotplug->pci_slot;
- memcpy (slot->info, info, sizeof (struct hotplug_slot_info));
+ memcpy(hotplug->info, info, sizeof(struct hotplug_slot_info));
return 0;
}
@@ -704,36 +675,22 @@ int __must_check pci_hp_change_slot_info(struct hotplug_slot *slot,
static int __init pci_hotplug_init (void)
{
int result;
- struct kset *pci_bus_kset;
- pci_bus_kset = bus_get_kset(&pci_bus_type);
-
- pci_hotplug_slots_kset = kset_create_and_add("slots", NULL,
- &pci_bus_kset->kobj);
- if (!pci_hotplug_slots_kset) {
- result = -ENOMEM;
- err("Register subsys error\n");
- goto exit;
- }
result = cpci_hotplug_init(debug);
if (result) {
err ("cpci_hotplug_init with error %d\n", result);
- goto err_subsys;
+ goto err_cpci;
}
info (DRIVER_DESC " version: " DRIVER_VERSION "\n");
- goto exit;
-err_subsys:
- kset_unregister(pci_hotplug_slots_kset);
-exit:
+err_cpci:
return result;
}
static void __exit pci_hotplug_exit (void)
{
cpci_hotplug_exit();
- kset_unregister(pci_hotplug_slots_kset);
}
module_init(pci_hotplug_init);
@@ -745,7 +702,6 @@ MODULE_LICENSE("GPL");
module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
-EXPORT_SYMBOL_GPL(pci_hotplug_slots_kset);
EXPORT_SYMBOL_GPL(pci_hp_register);
EXPORT_SYMBOL_GPL(pci_hp_deregister);
EXPORT_SYMBOL_GPL(pci_hp_change_slot_info);
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 79c9ddaad3f..e3a1e7e7dba 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -43,6 +43,7 @@ extern int pciehp_poll_mode;
extern int pciehp_poll_time;
extern int pciehp_debug;
extern int pciehp_force;
+extern int pciehp_slot_with_bus;
extern struct workqueue_struct *pciehp_wq;
#define dbg(format, arg...) \
@@ -96,7 +97,7 @@ struct controller {
u32 slot_cap;
u8 cap_base;
struct timer_list poll_timer;
- volatile int cmd_busy;
+ int cmd_busy;
unsigned int no_cmd_complete:1;
};
@@ -156,10 +157,10 @@ extern u8 pciehp_handle_power_fault(struct slot *p_slot);
extern int pciehp_configure_device(struct slot *p_slot);
extern int pciehp_unconfigure_device(struct slot *p_slot);
extern void pciehp_queue_pushbutton_work(struct work_struct *work);
-int pcie_init(struct controller *ctrl, struct pcie_device *dev);
+struct controller *pcie_init(struct pcie_device *dev);
int pciehp_enable_slot(struct slot *p_slot);
int pciehp_disable_slot(struct slot *p_slot);
-int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev);
+int pcie_enable_notification(struct controller *ctrl);
static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device)
{
@@ -202,8 +203,13 @@ struct hpc_ops {
#include <acpi/actypes.h>
#include <linux/pci-acpi.h>
-#define pciehp_get_hp_hw_control_from_firmware(dev) \
- pciehp_acpi_get_hp_hw_control_from_firmware(dev)
+static inline int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
+{
+ u32 flags = (OSC_PCI_EXPRESS_NATIVE_HP_CONTROL |
+ OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+ return acpi_get_hp_hw_control_from_firmware(dev, flags);
+}
+
static inline int pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
struct hotplug_params *hpp)
{
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 48a2ed37891..3677495c4f9 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -72,7 +72,6 @@ static int get_power_status (struct hotplug_slot *slot, u8 *value);
static int get_attention_status (struct hotplug_slot *slot, u8 *value);
static int get_latch_status (struct hotplug_slot *slot, u8 *value);
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
-static int get_address (struct hotplug_slot *slot, u32 *value);
static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
@@ -85,7 +84,6 @@ static struct hotplug_slot_ops pciehp_hotplug_slot_ops = {
.get_attention_status = get_attention_status,
.get_latch_status = get_latch_status,
.get_adapter_status = get_adapter_status,
- .get_address = get_address,
.get_max_bus_speed = get_max_bus_speed,
.get_cur_bus_speed = get_cur_bus_speed,
};
@@ -185,23 +183,10 @@ static struct hotplug_slot_attribute hotplug_slot_attr_lock = {
*/
static void release_slot(struct hotplug_slot *hotplug_slot)
{
- struct slot *slot = hotplug_slot->private;
-
dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
- kfree(slot->hotplug_slot->info);
- kfree(slot->hotplug_slot);
- kfree(slot);
-}
-
-static void make_slot_name(struct slot *slot)
-{
- if (pciehp_slot_with_bus)
- snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%04d_%04d",
- slot->bus, slot->number);
- else
- snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%d",
- slot->number);
+ kfree(hotplug_slot->info);
+ kfree(hotplug_slot);
}
static int init_slots(struct controller *ctrl)
@@ -210,49 +195,34 @@ static int init_slots(struct controller *ctrl)
struct hotplug_slot *hotplug_slot;
struct hotplug_slot_info *info;
int retval = -ENOMEM;
- int i;
-
- for (i = 0; i < ctrl->num_slots; i++) {
- slot = kzalloc(sizeof(*slot), GFP_KERNEL);
- if (!slot)
- goto error;
+ list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL);
if (!hotplug_slot)
- goto error_slot;
- slot->hotplug_slot = hotplug_slot;
+ goto error;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
goto error_hpslot;
- hotplug_slot->info = info;
-
- hotplug_slot->name = slot->name;
-
- slot->hp_slot = i;
- slot->ctrl = ctrl;
- slot->bus = ctrl->pci_dev->subordinate->number;
- slot->device = ctrl->slot_device_offset + i;
- slot->hpc_ops = ctrl->hpc_ops;
- slot->number = ctrl->first_slot;
- mutex_init(&slot->lock);
- INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
/* register this slot with the hotplug pci core */
+ hotplug_slot->info = info;
+ hotplug_slot->name = slot->name;
hotplug_slot->private = slot;
hotplug_slot->release = &release_slot;
- make_slot_name(slot);
hotplug_slot->ops = &pciehp_hotplug_slot_ops;
-
get_power_status(hotplug_slot, &info->power_status);
get_attention_status(hotplug_slot, &info->attention_status);
get_latch_status(hotplug_slot, &info->latch_status);
get_adapter_status(hotplug_slot, &info->adapter_status);
+ slot->hotplug_slot = hotplug_slot;
dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
"slot_device_offset=%x\n", slot->bus, slot->device,
slot->hp_slot, slot->number, ctrl->slot_device_offset);
- retval = pci_hp_register(hotplug_slot);
+ retval = pci_hp_register(hotplug_slot,
+ ctrl->pci_dev->subordinate,
+ slot->device);
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
if (retval == -EEXIST)
@@ -263,7 +233,7 @@ static int init_slots(struct controller *ctrl)
}
/* create additional sysfs entries */
if (EMI(ctrl)) {
- retval = sysfs_create_file(&hotplug_slot->kobj,
+ retval = sysfs_create_file(&hotplug_slot->pci_slot->kobj,
&hotplug_slot_attr_lock.attr);
if (retval) {
pci_hp_deregister(hotplug_slot);
@@ -271,8 +241,6 @@ static int init_slots(struct controller *ctrl)
goto error_info;
}
}
-
- list_add(&slot->slot_list, &ctrl->slot_list);
}
return 0;
@@ -280,27 +248,18 @@ error_info:
kfree(info);
error_hpslot:
kfree(hotplug_slot);
-error_slot:
- kfree(slot);
error:
return retval;
}
static void cleanup_slots(struct controller *ctrl)
{
- struct list_head *tmp;
- struct list_head *next;
struct slot *slot;
- list_for_each_safe(tmp, next, &ctrl->slot_list) {
- slot = list_entry(tmp, struct slot, slot_list);
- list_del(&slot->slot_list);
+ list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
if (EMI(ctrl))
- sysfs_remove_file(&slot->hotplug_slot->kobj,
+ sysfs_remove_file(&slot->hotplug_slot->pci_slot->kobj,
&hotplug_slot_attr_lock.attr);
- cancel_delayed_work(&slot->work);
- flush_scheduled_work();
- flush_workqueue(pciehp_wq);
pci_hp_deregister(slot->hotplug_slot);
}
}
@@ -398,19 +357,8 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
return 0;
}
-static int get_address(struct hotplug_slot *hotplug_slot, u32 *value)
-{
- struct slot *slot = hotplug_slot->private;
- struct pci_bus *bus = slot->ctrl->pci_dev->subordinate;
-
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
-
- *value = (pci_domain_nr(bus) << 16) | (slot->bus << 8) | slot->device;
-
- return 0;
-}
-
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
+ enum pci_bus_speed *value)
{
struct slot *slot = hotplug_slot->private;
int retval;
@@ -444,34 +392,30 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
struct controller *ctrl;
struct slot *t_slot;
u8 value;
- struct pci_dev *pdev;
+ struct pci_dev *pdev = dev->port;
- ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
- if (!ctrl) {
- err("%s : out of memory\n", __func__);
+ if (pciehp_force)
+ dbg("Bypassing BIOS check for pciehp use on %s\n",
+ pci_name(pdev));
+ else if (pciehp_get_hp_hw_control_from_firmware(pdev))
goto err_out_none;
- }
- INIT_LIST_HEAD(&ctrl->slot_list);
-
- pdev = dev->port;
- ctrl->pci_dev = pdev;
- rc = pcie_init(ctrl, dev);
- if (rc) {
+ ctrl = pcie_init(dev);
+ if (!ctrl) {
dbg("%s: controller initialization failed\n", PCIE_MODULE_NAME);
- goto err_out_free_ctrl;
+ goto err_out_none;
}
-
- pci_set_drvdata(pdev, ctrl);
-
- dbg("%s: ctrl bus=0x%x, device=%x, function=%x, irq=%x\n",
- __func__, pdev->bus->number, PCI_SLOT(pdev->devfn),
- PCI_FUNC(pdev->devfn), pdev->irq);
+ set_service_data(dev, ctrl);
/* Setup the slot information structures */
rc = init_slots(ctrl);
if (rc) {
- err("%s: slot initialization failed\n", PCIE_MODULE_NAME);
+ if (rc == -EBUSY)
+ warn("%s: slot already registered by another "
+ "hotplug driver\n", PCIE_MODULE_NAME);
+ else
+ err("%s: slot initialization failed\n",
+ PCIE_MODULE_NAME);
goto err_out_release_ctlr;
}
@@ -495,20 +439,16 @@ err_out_free_ctrl_slot:
cleanup_slots(ctrl);
err_out_release_ctlr:
ctrl->hpc_ops->release_ctlr(ctrl);
-err_out_free_ctrl:
- kfree(ctrl);
err_out_none:
return -ENODEV;
}
static void pciehp_remove (struct pcie_device *dev)
{
- struct pci_dev *pdev = dev->port;
- struct controller *ctrl = pci_get_drvdata(pdev);
+ struct controller *ctrl = get_service_data(dev);
cleanup_slots(ctrl);
ctrl->hpc_ops->release_ctlr(ctrl);
- kfree(ctrl);
}
#ifdef CONFIG_PM
@@ -522,13 +462,12 @@ static int pciehp_resume (struct pcie_device *dev)
{
printk("%s ENTRY\n", __func__);
if (pciehp_force) {
- struct pci_dev *pdev = dev->port;
- struct controller *ctrl = pci_get_drvdata(pdev);
+ struct controller *ctrl = get_service_data(dev);
struct slot *t_slot;
u8 status;
/* reinitialize the chipset's event detection logic */
- pcie_init_hardware_part2(ctrl, dev);
+ pcie_enable_notification(ctrl);
t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 79f10496316..1323a43285d 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -247,30 +247,32 @@ static inline void pciehp_free_irq(struct controller *ctrl)
free_irq(ctrl->pci_dev->irq, ctrl);
}
-static inline int pcie_poll_cmd(struct controller *ctrl)
+static int pcie_poll_cmd(struct controller *ctrl)
{
u16 slot_status;
int timeout = 1000;
- if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
- if (slot_status & CMD_COMPLETED)
- goto completed;
- for (timeout = 1000; timeout > 0; timeout -= 100) {
- msleep(100);
- if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
- if (slot_status & CMD_COMPLETED)
- goto completed;
+ if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) {
+ if (slot_status & CMD_COMPLETED) {
+ pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
+ return 1;
+ }
+ }
+ while (timeout > 1000) {
+ msleep(10);
+ timeout -= 10;
+ if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) {
+ if (slot_status & CMD_COMPLETED) {
+ pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
+ return 1;
+ }
+ }
}
return 0; /* timeout */
-
-completed:
- pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
- return timeout;
}
-static inline int pcie_wait_cmd(struct controller *ctrl, int poll)
+static void pcie_wait_cmd(struct controller *ctrl, int poll)
{
- int retval = 0;
unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
unsigned long timeout = msecs_to_jiffies(msecs);
int rc;
@@ -278,16 +280,9 @@ static inline int pcie_wait_cmd(struct controller *ctrl, int poll)
if (poll)
rc = pcie_poll_cmd(ctrl);
else
- rc = wait_event_interruptible_timeout(ctrl->queue,
- !ctrl->cmd_busy, timeout);
+ rc = wait_event_timeout(ctrl->queue, !ctrl->cmd_busy, timeout);
if (!rc)
dbg("Command not completed in 1000 msec\n");
- else if (rc < 0) {
- retval = -EINTR;
- info("Command was interrupted by a signal\n");
- }
-
- return retval;
}
/**
@@ -342,10 +337,6 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
slot_ctrl &= ~mask;
slot_ctrl |= (cmd & mask);
- /* Don't enable command completed if caller is changing it. */
- if (!(mask & CMD_CMPL_INTR_ENABLE))
- slot_ctrl |= CMD_CMPL_INTR_ENABLE;
-
ctrl->cmd_busy = 1;
smp_mb();
retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl);
@@ -365,7 +356,7 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
if (!(slot_ctrl & HP_INTR_ENABLE) ||
!(slot_ctrl & CMD_CMPL_INTR_ENABLE))
poll = 1;
- retval = pcie_wait_cmd(ctrl, poll);
+ pcie_wait_cmd(ctrl, poll);
}
out:
mutex_unlock(&ctrl->ctrl_lock);
@@ -614,23 +605,6 @@ static void hpc_set_green_led_blink(struct slot *slot)
__func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
}
-static void hpc_release_ctlr(struct controller *ctrl)
-{
- /* Mask Hot-plug Interrupt Enable */
- if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE))
- err("%s: Cannot mask hotplut interrupt enable\n", __func__);
-
- /* Free interrupt handler or interrupt polling timer */
- pciehp_free_irq(ctrl);
-
- /*
- * If this is the last controller to be released, destroy the
- * pciehp work queue
- */
- if (atomic_dec_and_test(&pciehp_num_controllers))
- destroy_workqueue(pciehp_wq);
-}
-
static int hpc_power_on_slot(struct slot * slot)
{
struct controller *ctrl = slot->ctrl;
@@ -785,7 +759,7 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
intr_loc |= detected;
if (!intr_loc)
return IRQ_NONE;
- if (pciehp_writew(ctrl, SLOTSTATUS, detected)) {
+ if (detected && pciehp_writew(ctrl, SLOTSTATUS, detected)) {
err("%s: Cannot write to SLOTSTATUS\n", __func__);
return IRQ_NONE;
}
@@ -797,25 +771,13 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
if (intr_loc & CMD_COMPLETED) {
ctrl->cmd_busy = 0;
smp_mb();
- wake_up_interruptible(&ctrl->queue);
+ wake_up(&ctrl->queue);
}
if (!(intr_loc & ~CMD_COMPLETED))
return IRQ_HANDLED;
- /*
- * Return without handling events if this handler routine is
- * called before controller initialization is done. This may
- * happen if hotplug event or another interrupt that shares
- * the IRQ with pciehp arrives before slot initialization is
- * done after interrupt handler is registered.
- *
- * FIXME - Need more structural fixes. We need to be ready to
- * handle the event before installing interrupt handler.
- */
p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
- if (!p_slot || !p_slot->hpc_ops)
- return IRQ_HANDLED;
/* Check MRL Sensor Changed */
if (intr_loc & MRL_SENS_CHANGED)
@@ -992,6 +954,7 @@ static int hpc_get_cur_lnk_width(struct slot *slot,
return retval;
}
+static void pcie_release_ctrl(struct controller *ctrl);
static struct hpc_ops pciehp_hpc_ops = {
.power_on_slot = hpc_power_on_slot,
.power_off_slot = hpc_power_off_slot,
@@ -1013,97 +976,11 @@ static struct hpc_ops pciehp_hpc_ops = {
.green_led_off = hpc_set_green_led_off,
.green_led_blink = hpc_set_green_led_blink,
- .release_ctlr = hpc_release_ctlr,
+ .release_ctlr = pcie_release_ctrl,
.check_lnk_status = hpc_check_lnk_status,
};
-#ifdef CONFIG_ACPI
-static int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
- acpi_status status;
- acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
- struct pci_dev *pdev = dev;
- struct pci_bus *parent;
- struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
-
- /*
- * Per PCI firmware specification, we should run the ACPI _OSC
- * method to get control of hotplug hardware before using it.
- * If an _OSC is missing, we look for an OSHP to do the same thing.
- * To handle different BIOS behavior, we look for _OSC and OSHP
- * within the scope of the hotplug controller and its parents, upto
- * the host bridge under which this controller exists.
- */
- while (!handle) {
- /*
- * This hotplug controller was not listed in the ACPI name
- * space at all. Try to get acpi handle of parent pci bus.
- */
- if (!pdev || !pdev->bus->parent)
- break;
- parent = pdev->bus->parent;
- dbg("Could not find %s in acpi namespace, trying parent\n",
- pci_name(pdev));
- if (!parent->self)
- /* Parent must be a host bridge */
- handle = acpi_get_pci_rootbridge_handle(
- pci_domain_nr(parent),
- parent->number);
- else
- handle = DEVICE_ACPI_HANDLE(
- &(parent->self->dev));
- pdev = parent->self;
- }
-
- while (handle) {
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
- dbg("Trying to get hotplug control for %s \n",
- (char *)string.pointer);
- status = pci_osc_control_set(handle,
- OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL |
- OSC_PCI_EXPRESS_NATIVE_HP_CONTROL);
- if (status == AE_NOT_FOUND)
- status = acpi_run_oshp(handle);
- if (ACPI_SUCCESS(status)) {
- dbg("Gained control for hotplug HW for pci %s (%s)\n",
- pci_name(dev), (char *)string.pointer);
- kfree(string.pointer);
- return 0;
- }
- if (acpi_root_bridge(handle))
- break;
- chandle = handle;
- status = acpi_get_parent(chandle, &handle);
- if (ACPI_FAILURE(status))
- break;
- }
-
- dbg("Cannot get control of hotplug hardware for pci %s\n",
- pci_name(dev));
-
- kfree(string.pointer);
- return -1;
-}
-#endif
-
-static int pcie_init_hardware_part1(struct controller *ctrl,
- struct pcie_device *dev)
-{
- /* Clear all remaining event bits in Slot Status register */
- if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
- err("%s: Cannot write to SLOTSTATUS register\n", __func__);
- return -1;
- }
-
- /* Mask Hot-plug Interrupt Enable */
- if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) {
- err("%s: Cannot mask hotplug interrupt enable\n", __func__);
- return -1;
- }
- return 0;
-}
-
-int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev)
+int pcie_enable_notification(struct controller *ctrl)
{
u16 cmd, mask;
@@ -1115,30 +992,83 @@ int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev)
if (MRL_SENS(ctrl))
cmd |= MRL_DETECT_ENABLE;
if (!pciehp_poll_mode)
- cmd |= HP_INTR_ENABLE;
+ cmd |= HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE;
- mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE |
- PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE | HP_INTR_ENABLE;
+ mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE |
+ PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE;
if (pcie_write_cmd(ctrl, cmd, mask)) {
err("%s: Cannot enable software notification\n", __func__);
- goto abort;
+ return -1;
}
+ return 0;
+}
- if (pciehp_force)
- dbg("Bypassing BIOS check for pciehp use on %s\n",
- pci_name(ctrl->pci_dev));
- else if (pciehp_get_hp_hw_control_from_firmware(ctrl->pci_dev))
- goto abort_disable_intr;
+static void pcie_disable_notification(struct controller *ctrl)
+{
+ u16 mask;
+ mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE |
+ PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE;
+ if (pcie_write_cmd(ctrl, 0, mask))
+ warn("%s: Cannot disable software notification\n", __func__);
+}
+static int pcie_init_notification(struct controller *ctrl)
+{
+ if (pciehp_request_irq(ctrl))
+ return -1;
+ if (pcie_enable_notification(ctrl)) {
+ pciehp_free_irq(ctrl);
+ return -1;
+ }
return 0;
+}
- /* We end up here for the many possible ways to fail this API. */
-abort_disable_intr:
- if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE))
- err("%s : disabling interrupts failed\n", __func__);
-abort:
- return -1;
+static void pcie_shutdown_notification(struct controller *ctrl)
+{
+ pcie_disable_notification(ctrl);
+ pciehp_free_irq(ctrl);
+}
+
+static void make_slot_name(struct slot *slot)
+{
+ if (pciehp_slot_with_bus)
+ snprintf(slot->name, SLOT_NAME_SIZE, "%04d_%04d",
+ slot->bus, slot->number);
+ else
+ snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number);
+}
+
+static int pcie_init_slot(struct controller *ctrl)
+{
+ struct slot *slot;
+
+ slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+ if (!slot)
+ return -ENOMEM;
+
+ slot->hp_slot = 0;
+ slot->ctrl = ctrl;
+ slot->bus = ctrl->pci_dev->subordinate->number;
+ slot->device = ctrl->slot_device_offset + slot->hp_slot;
+ slot->hpc_ops = ctrl->hpc_ops;
+ slot->number = ctrl->first_slot;
+ make_slot_name(slot);
+ mutex_init(&slot->lock);
+ INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
+ list_add(&slot->slot_list, &ctrl->slot_list);
+ return 0;
+}
+
+static void pcie_cleanup_slot(struct controller *ctrl)
+{
+ struct slot *slot;
+ slot = list_first_entry(&ctrl->slot_list, struct slot, slot_list);
+ list_del(&slot->slot_list);
+ cancel_delayed_work(&slot->work);
+ flush_scheduled_work();
+ flush_workqueue(pciehp_wq);
+ kfree(slot);
}
static inline void dbg_ctrl(struct controller *ctrl)
@@ -1176,15 +1106,23 @@ static inline void dbg_ctrl(struct controller *ctrl)
dbg(" Comamnd Completed : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes");
pciehp_readw(ctrl, SLOTSTATUS, &reg16);
dbg("Slot Status : 0x%04x\n", reg16);
- pciehp_readw(ctrl, SLOTSTATUS, &reg16);
+ pciehp_readw(ctrl, SLOTCTRL, &reg16);
dbg("Slot Control : 0x%04x\n", reg16);
}
-int pcie_init(struct controller *ctrl, struct pcie_device *dev)
+struct controller *pcie_init(struct pcie_device *dev)
{
+ struct controller *ctrl;
u32 slot_cap;
struct pci_dev *pdev = dev->port;
+ ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl) {
+ err("%s : out of memory\n", __func__);
+ goto abort;
+ }
+ INIT_LIST_HEAD(&ctrl->slot_list);
+
ctrl->pci_dev = pdev;
ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (!ctrl->cap_base) {
@@ -1215,15 +1153,12 @@ int pcie_init(struct controller *ctrl, struct pcie_device *dev)
!(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl)))
ctrl->no_cmd_complete = 1;
- info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
- pdev->vendor, pdev->device,
- pdev->subsystem_vendor, pdev->subsystem_device);
+ /* Clear all remaining event bits in Slot Status register */
+ if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f))
+ goto abort_ctrl;
- if (pcie_init_hardware_part1(ctrl, dev))
- goto abort;
-
- if (pciehp_request_irq(ctrl))
- goto abort;
+ /* Disable sotfware notification */
+ pcie_disable_notification(ctrl);
/*
* If this is the first controller to be initialized,
@@ -1231,18 +1166,39 @@ int pcie_init(struct controller *ctrl, struct pcie_device *dev)
*/
if (atomic_add_return(1, &pciehp_num_controllers) == 1) {
pciehp_wq = create_singlethread_workqueue("pciehpd");
- if (!pciehp_wq) {
- goto abort_free_irq;
- }
+ if (!pciehp_wq)
+ goto abort_ctrl;
}
- if (pcie_init_hardware_part2(ctrl, dev))
- goto abort_free_irq;
+ info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
+ pdev->vendor, pdev->device,
+ pdev->subsystem_vendor, pdev->subsystem_device);
+
+ if (pcie_init_slot(ctrl))
+ goto abort_ctrl;
- return 0;
+ if (pcie_init_notification(ctrl))
+ goto abort_slot;
-abort_free_irq:
- pciehp_free_irq(ctrl);
+ return ctrl;
+
+abort_slot:
+ pcie_cleanup_slot(ctrl);
+abort_ctrl:
+ kfree(ctrl);
abort:
- return -1;
+ return NULL;
+}
+
+void pcie_release_ctrl(struct controller *ctrl)
+{
+ pcie_shutdown_notification(ctrl);
+ pcie_cleanup_slot(ctrl);
+ /*
+ * If this is the last controller to be released, destroy the
+ * pciehp work queue
+ */
+ if (atomic_dec_and_test(&pciehp_num_controllers))
+ destroy_workqueue(pciehp_wq);
+ kfree(ctrl);
}
diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c
index 779c5db71be..a796301ea03 100644
--- a/drivers/pci/hotplug/rpadlpar_sysfs.c
+++ b/drivers/pci/hotplug/rpadlpar_sysfs.c
@@ -14,8 +14,10 @@
*/
#include <linux/kobject.h>
#include <linux/string.h>
+#include <linux/pci.h>
#include <linux/pci_hotplug.h>
#include "rpadlpar.h"
+#include "../pci.h"
#define DLPAR_KOBJ_NAME "control"
@@ -27,7 +29,6 @@
#define MAX_DRC_NAME_LEN 64
-
static ssize_t add_slot_store(struct kobject *kobj, struct kobj_attribute *attr,
const char *buf, size_t nbytes)
{
@@ -112,7 +113,7 @@ int dlpar_sysfs_init(void)
int error;
dlpar_kobj = kobject_create_and_add(DLPAR_KOBJ_NAME,
- &pci_hotplug_slots_kset->kobj);
+ &pci_slots_kset->kobj);
if (!dlpar_kobj)
return -EINVAL;
diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c
index 56197b600d3..9b714ea93d2 100644
--- a/drivers/pci/hotplug/rpaphp_slot.c
+++ b/drivers/pci/hotplug/rpaphp_slot.c
@@ -33,33 +33,6 @@
#include <asm/rtas.h>
#include "rpaphp.h"
-static ssize_t address_read_file (struct hotplug_slot *php_slot, char *buf)
-{
- int retval;
- struct slot *slot = (struct slot *)php_slot->private;
- struct pci_bus *bus;
-
- if (!slot)
- return -ENOENT;
-
- bus = slot->bus;
- if (!bus)
- return -ENOENT;
-
- if (bus->self)
- retval = sprintf(buf, pci_name(bus->self));
- else
- retval = sprintf(buf, "%04x:%02x:00.0",
- pci_domain_nr(bus), bus->number);
-
- return retval;
-}
-
-static struct hotplug_slot_attribute php_attr_address = {
- .attr = {.name = "address", .mode = S_IFREG | S_IRUGO},
- .show = address_read_file,
-};
-
/* free up the memory used by a slot */
static void rpaphp_release_slot(struct hotplug_slot *hotplug_slot)
{
@@ -135,9 +108,6 @@ int rpaphp_deregister_slot(struct slot *slot)
list_del(&slot->rpaphp_slot_list);
- /* remove "address" file */
- sysfs_remove_file(&php_slot->kobj, &php_attr_address.attr);
-
retval = pci_hp_deregister(php_slot);
if (retval)
err("Problem unregistering a slot %s\n", slot->name);
@@ -151,6 +121,7 @@ int rpaphp_register_slot(struct slot *slot)
{
struct hotplug_slot *php_slot = slot->hotplug_slot;
int retval;
+ int slotno;
dbg("%s registering slot:path[%s] index[%x], name[%s] pdomain[%x] type[%d]\n",
__func__, slot->dn->full_name, slot->index, slot->name,
@@ -162,19 +133,16 @@ int rpaphp_register_slot(struct slot *slot)
return -EAGAIN;
}
- retval = pci_hp_register(php_slot);
+ if (slot->dn->child)
+ slotno = PCI_SLOT(PCI_DN(slot->dn->child)->devfn);
+ else
+ slotno = -1;
+ retval = pci_hp_register(php_slot, slot->bus, slotno);
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
return retval;
}
- /* create "address" file */
- retval = sysfs_create_file(&php_slot->kobj, &php_attr_address.attr);
- if (retval) {
- err("sysfs_create_file failed with error %d\n", retval);
- goto sysfs_fail;
- }
-
/* add slot to our internal list */
list_add(&slot->rpaphp_slot_list, &rpaphp_slot_head);
info("Slot [%s] registered\n", slot->name);
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index 2fe37cd85b6..410fe0394a8 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -197,13 +197,15 @@ static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot,
static struct hotplug_slot * sn_hp_destroy(void)
{
struct slot *slot;
+ struct pci_slot *pci_slot;
struct hotplug_slot *bss_hotplug_slot = NULL;
list_for_each_entry(slot, &sn_hp_list, hp_list) {
bss_hotplug_slot = slot->hotplug_slot;
+ pci_slot = bss_hotplug_slot->pci_slot;
list_del(&((struct slot *)bss_hotplug_slot->private)->
hp_list);
- sysfs_remove_file(&bss_hotplug_slot->kobj,
+ sysfs_remove_file(&pci_slot->kobj,
&sn_slot_path_attr.attr);
break;
}
@@ -614,6 +616,7 @@ static void sn_release_slot(struct hotplug_slot *bss_hotplug_slot)
static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
{
int device;
+ struct pci_slot *pci_slot;
struct hotplug_slot *bss_hotplug_slot;
int rc = 0;
@@ -650,11 +653,12 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
bss_hotplug_slot->ops = &sn_hotplug_slot_ops;
bss_hotplug_slot->release = &sn_release_slot;
- rc = pci_hp_register(bss_hotplug_slot);
+ rc = pci_hp_register(bss_hotplug_slot, pci_bus, device);
if (rc)
goto register_err;
- rc = sysfs_create_file(&bss_hotplug_slot->kobj,
+ pci_slot = bss_hotplug_slot->pci_slot;
+ rc = sysfs_create_file(&pci_slot->kobj,
&sn_slot_path_attr.attr);
if (rc)
goto register_err;
@@ -664,7 +668,7 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
register_err:
dev_dbg(&pci_bus->self->dev, "bus failed to register with err = %d\n",
- rc);
+ rc);
alloc_err:
if (rc == -ENOMEM)
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index f66e8d6315a..8a026f750de 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -170,6 +170,7 @@ extern void shpchp_queue_pushbutton_work(struct work_struct *work);
extern int shpc_init( struct controller *ctrl, struct pci_dev *pdev);
#ifdef CONFIG_ACPI
+#include <linux/pci-acpi.h>
static inline int get_hp_params_from_firmware(struct pci_dev *dev,
struct hotplug_params *hpp)
{
@@ -177,14 +178,15 @@ static inline int get_hp_params_from_firmware(struct pci_dev *dev,
return -ENODEV;
return 0;
}
-#define get_hp_hw_control_from_firmware(pdev) \
- do { \
- if (DEVICE_ACPI_HANDLE(&(pdev->dev))) \
- acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev)));\
- } while (0)
+
+static inline int get_hp_hw_control_from_firmware(struct pci_dev *dev)
+{
+ u32 flags = OSC_SHPC_NATIVE_HP_CONTROL;
+ return acpi_get_hp_hw_control_from_firmware(dev, flags);
+}
#else
#define get_hp_params_from_firmware(dev, hpp) (-ENODEV)
-#define get_hp_hw_control_from_firmware(dev) do { } while (0)
+#define get_hp_hw_control_from_firmware(dev) (0)
#endif
struct ctrl_reg {
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 97848654652..a8cbd039b85 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -39,7 +39,7 @@
int shpchp_debug;
int shpchp_poll_mode;
int shpchp_poll_time;
-int shpchp_slot_with_bus;
+static int shpchp_slot_with_bus;
struct workqueue_struct *shpchp_wq;
#define DRIVER_VERSION "0.4"
@@ -68,7 +68,6 @@ static int get_power_status (struct hotplug_slot *slot, u8 *value);
static int get_attention_status (struct hotplug_slot *slot, u8 *value);
static int get_latch_status (struct hotplug_slot *slot, u8 *value);
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
-static int get_address (struct hotplug_slot *slot, u32 *value);
static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
@@ -81,7 +80,6 @@ static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
.get_attention_status = get_attention_status,
.get_latch_status = get_latch_status,
.get_adapter_status = get_adapter_status,
- .get_address = get_address,
.get_max_bus_speed = get_max_bus_speed,
.get_cur_bus_speed = get_cur_bus_speed,
};
@@ -159,7 +157,8 @@ static int init_slots(struct controller *ctrl)
dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
"slot_device_offset=%x\n", slot->bus, slot->device,
slot->hp_slot, slot->number, ctrl->slot_device_offset);
- retval = pci_hp_register(slot->hotplug_slot);
+ retval = pci_hp_register(slot->hotplug_slot,
+ ctrl->pci_dev->subordinate, slot->device);
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
if (retval == -EEXIST)
@@ -288,19 +287,8 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
return 0;
}
-static int get_address (struct hotplug_slot *hotplug_slot, u32 *value)
-{
- struct slot *slot = get_slot(hotplug_slot);
- struct pci_bus *bus = slot->ctrl->pci_dev->subordinate;
-
- dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
-
- *value = (pci_domain_nr(bus) << 16) | (slot->bus << 8) | slot->device;
-
- return 0;
-}
-
-static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
+ enum pci_bus_speed *value)
{
struct slot *slot = get_slot(hotplug_slot);
int retval;
@@ -330,13 +318,14 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp
static int is_shpc_capable(struct pci_dev *dev)
{
- if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
- PCI_DEVICE_ID_AMD_GOLAM_7450))
- return 1;
- if (pci_find_capability(dev, PCI_CAP_ID_SHPC))
- return 1;
-
- return 0;
+ if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
+ PCI_DEVICE_ID_AMD_GOLAM_7450))
+ return 1;
+ if (!pci_find_capability(dev, PCI_CAP_ID_SHPC))
+ return 0;
+ if (get_hp_hw_control_from_firmware(dev))
+ return 0;
+ return 1;
}
static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 7d770b2cd88..7a0bff364cd 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -1084,7 +1084,6 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
dbg("%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", __func__,
pdev->bus->number, PCI_SLOT(pdev->devfn),
PCI_FUNC(pdev->devfn), pdev->irq);
- get_hp_hw_control_from_firmware(pdev);
/*
* If this is the first controller to be initialized,
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index bb0642318a9..3f7b81c065d 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -1748,7 +1748,6 @@ int __init init_dmars(void)
deferred_flush = kzalloc(g_num_of_iommus *
sizeof(struct deferred_flush_tables), GFP_KERNEL);
if (!deferred_flush) {
- kfree(g_iommus);
ret = -ENOMEM;
goto error;
}
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 8c61304cbb3..15af618d36e 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -70,12 +70,10 @@ arch_teardown_msi_irqs(struct pci_dev *dev)
}
}
-static void msi_set_enable(struct pci_dev *dev, int enable)
+static void __msi_set_enable(struct pci_dev *dev, int pos, int enable)
{
- int pos;
u16 control;
- pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
if (pos) {
pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
control &= ~PCI_MSI_FLAGS_ENABLE;
@@ -85,6 +83,11 @@ static void msi_set_enable(struct pci_dev *dev, int enable)
}
}
+static void msi_set_enable(struct pci_dev *dev, int enable)
+{
+ __msi_set_enable(dev, pci_find_capability(dev, PCI_CAP_ID_MSI), enable);
+}
+
static void msix_set_enable(struct pci_dev *dev, int enable)
{
int pos;
@@ -141,7 +144,8 @@ static void msi_set_mask_bits(unsigned int irq, u32 mask, u32 flag)
mask_bits |= flag & mask;
pci_write_config_dword(entry->dev, pos, mask_bits);
} else {
- msi_set_enable(entry->dev, !flag);
+ __msi_set_enable(entry->dev, entry->msi_attrib.pos,
+ !flag);
}
break;
case PCI_CAP_ID_MSIX:
@@ -561,9 +565,8 @@ int pci_enable_msi(struct pci_dev* dev)
/* Check whether driver already requested for MSI-X irqs */
if (dev->msix_enabled) {
- printk(KERN_INFO "PCI: %s: Can't enable MSI. "
- "Device already has MSI-X enabled\n",
- pci_name(dev));
+ dev_info(&dev->dev, "can't enable MSI "
+ "(MSI-X already enabled)\n");
return -EINVAL;
}
status = msi_capability_init(dev);
@@ -686,9 +689,8 @@ int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec)
/* Check whether driver already requested for MSI irq */
if (dev->msi_enabled) {
- printk(KERN_INFO "PCI: %s: Can't enable MSI-X. "
- "Device already has an MSI irq assigned\n",
- pci_name(dev));
+ dev_info(&dev->dev, "can't enable MSI-X "
+ "(MSI IRQ already assigned)\n");
return -EINVAL;
}
status = msix_capability_init(dev, entries, nvec);
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index dab9d471914..7764768b6a0 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -21,12 +21,19 @@
struct acpi_osc_data {
acpi_handle handle;
- u32 ctrlset_buf[3];
- u32 global_ctrlsets;
+ u32 support_set;
+ u32 control_set;
+ int is_queried;
+ u32 query_result;
struct list_head sibiling;
};
static LIST_HEAD(acpi_osc_data_list);
+struct acpi_osc_args {
+ u32 capbuf[3];
+ u32 query_result;
+};
+
static struct acpi_osc_data *acpi_get_osc_data(acpi_handle handle)
{
struct acpi_osc_data *data;
@@ -44,42 +51,18 @@ static struct acpi_osc_data *acpi_get_osc_data(acpi_handle handle)
return data;
}
-static u8 OSC_UUID[16] = {0x5B, 0x4D, 0xDB, 0x33, 0xF7, 0x1F, 0x1C, 0x40, 0x96, 0x57, 0x74, 0x41, 0xC0, 0x3D, 0xD7, 0x66};
+static u8 OSC_UUID[16] = {0x5B, 0x4D, 0xDB, 0x33, 0xF7, 0x1F, 0x1C, 0x40,
+ 0x96, 0x57, 0x74, 0x41, 0xC0, 0x3D, 0xD7, 0x66};
-static acpi_status
-acpi_query_osc (
- acpi_handle handle,
- u32 level,
- void *context,
- void **retval )
+static acpi_status acpi_run_osc(acpi_handle handle,
+ struct acpi_osc_args *osc_args)
{
- acpi_status status;
- struct acpi_object_list input;
- union acpi_object in_params[4];
- struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
- union acpi_object *out_obj;
- u32 osc_dw0;
- acpi_status *ret_status = (acpi_status *)retval;
- struct acpi_osc_data *osc_data;
- u32 flags = (unsigned long)context, temp;
- acpi_handle tmp;
-
- status = acpi_get_handle(handle, "_OSC", &tmp);
- if (ACPI_FAILURE(status))
- return status;
-
- osc_data = acpi_get_osc_data(handle);
- if (!osc_data) {
- printk(KERN_ERR "acpi osc data array is full\n");
- return AE_ERROR;
- }
-
- osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] |= (flags & OSC_SUPPORT_MASKS);
-
- /* do _OSC query for all possible controls */
- temp = osc_data->ctrlset_buf[OSC_CONTROL_TYPE];
- osc_data->ctrlset_buf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
- osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS;
+ acpi_status status;
+ struct acpi_object_list input;
+ union acpi_object in_params[4];
+ struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+ union acpi_object *out_obj;
+ u32 osc_dw0, flags = osc_args->capbuf[OSC_QUERY_TYPE];
/* Setting up input parameters */
input.count = 4;
@@ -93,20 +76,19 @@ acpi_query_osc (
in_params[2].integer.value = 3;
in_params[3].type = ACPI_TYPE_BUFFER;
in_params[3].buffer.length = 12;
- in_params[3].buffer.pointer = (u8 *)osc_data->ctrlset_buf;
+ in_params[3].buffer.pointer = (u8 *)osc_args->capbuf;
status = acpi_evaluate_object(handle, "_OSC", &input, &output);
if (ACPI_FAILURE(status))
- goto out_nofree;
- out_obj = output.pointer;
+ return status;
+ out_obj = output.pointer;
if (out_obj->type != ACPI_TYPE_BUFFER) {
- printk(KERN_DEBUG
- "Evaluate _OSC returns wrong type\n");
+ printk(KERN_DEBUG "Evaluate _OSC returns wrong type\n");
status = AE_TYPE;
- goto query_osc_out;
+ goto out_kfree;
}
- osc_dw0 = *((u32 *) out_obj->buffer.pointer);
+ osc_dw0 = *((u32 *)out_obj->buffer.pointer);
if (osc_dw0) {
if (osc_dw0 & OSC_REQUEST_ERROR)
printk(KERN_DEBUG "_OSC request fails\n");
@@ -115,93 +97,58 @@ acpi_query_osc (
if (osc_dw0 & OSC_INVALID_REVISION_ERROR)
printk(KERN_DEBUG "_OSC invalid revision\n");
if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
- /* Update Global Control Set */
- osc_data->global_ctrlsets =
- *((u32 *)(out_obj->buffer.pointer + 8));
- status = AE_OK;
- goto query_osc_out;
+ if (flags & OSC_QUERY_ENABLE)
+ goto out_success;
+ printk(KERN_DEBUG "_OSC FW not grant req. control\n");
+ status = AE_SUPPORT;
+ goto out_kfree;
}
status = AE_ERROR;
- goto query_osc_out;
+ goto out_kfree;
}
-
- /* Update Global Control Set */
- osc_data->global_ctrlsets = *((u32 *)(out_obj->buffer.pointer + 8));
+out_success:
+ if (flags & OSC_QUERY_ENABLE)
+ osc_args->query_result =
+ *((u32 *)(out_obj->buffer.pointer + 8));
status = AE_OK;
-query_osc_out:
+out_kfree:
kfree(output.pointer);
-out_nofree:
- *ret_status = status;
-
- osc_data->ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE;
- osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = temp;
- if (ACPI_FAILURE(status)) {
- /* no osc support at all */
- osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] = 0;
- }
-
return status;
}
-
-static acpi_status
-acpi_run_osc (
- acpi_handle handle,
- void *context)
+static acpi_status acpi_query_osc(acpi_handle handle,
+ u32 level, void *context, void **retval)
{
- acpi_status status;
- struct acpi_object_list input;
- union acpi_object in_params[4];
- struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
- union acpi_object *out_obj;
- u32 osc_dw0;
-
- /* Setting up input parameters */
- input.count = 4;
- input.pointer = in_params;
- in_params[0].type = ACPI_TYPE_BUFFER;
- in_params[0].buffer.length = 16;
- in_params[0].buffer.pointer = OSC_UUID;
- in_params[1].type = ACPI_TYPE_INTEGER;
- in_params[1].integer.value = 1;
- in_params[2].type = ACPI_TYPE_INTEGER;
- in_params[2].integer.value = 3;
- in_params[3].type = ACPI_TYPE_BUFFER;
- in_params[3].buffer.length = 12;
- in_params[3].buffer.pointer = (u8 *)context;
+ acpi_status status;
+ struct acpi_osc_data *osc_data;
+ u32 flags = (unsigned long)context, support_set;
+ acpi_handle tmp;
+ struct acpi_osc_args osc_args;
- status = acpi_evaluate_object(handle, "_OSC", &input, &output);
- if (ACPI_FAILURE (status))
+ status = acpi_get_handle(handle, "_OSC", &tmp);
+ if (ACPI_FAILURE(status))
return status;
- out_obj = output.pointer;
- if (out_obj->type != ACPI_TYPE_BUFFER) {
- printk(KERN_DEBUG
- "Evaluate _OSC returns wrong type\n");
- status = AE_TYPE;
- goto run_osc_out;
+ osc_data = acpi_get_osc_data(handle);
+ if (!osc_data) {
+ printk(KERN_ERR "acpi osc data array is full\n");
+ return AE_ERROR;
}
- osc_dw0 = *((u32 *) out_obj->buffer.pointer);
- if (osc_dw0) {
- if (osc_dw0 & OSC_REQUEST_ERROR)
- printk(KERN_DEBUG "_OSC request fails\n");
- if (osc_dw0 & OSC_INVALID_UUID_ERROR)
- printk(KERN_DEBUG "_OSC invalid UUID\n");
- if (osc_dw0 & OSC_INVALID_REVISION_ERROR)
- printk(KERN_DEBUG "_OSC invalid revision\n");
- if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
- printk(KERN_DEBUG "_OSC FW not grant req. control\n");
- status = AE_SUPPORT;
- goto run_osc_out;
- }
- status = AE_ERROR;
- goto run_osc_out;
+
+ /* do _OSC query for all possible controls */
+ support_set = osc_data->support_set | (flags & OSC_SUPPORT_MASKS);
+ osc_args.capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
+ osc_args.capbuf[OSC_SUPPORT_TYPE] = support_set;
+ osc_args.capbuf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS;
+
+ status = acpi_run_osc(handle, &osc_args);
+ if (ACPI_SUCCESS(status)) {
+ osc_data->support_set = support_set;
+ osc_data->query_result = osc_args.query_result;
+ osc_data->is_queried = 1;
}
- status = AE_OK;
-run_osc_out:
- kfree(output.pointer);
return status;
}
@@ -215,15 +162,11 @@ run_osc_out:
**/
acpi_status __pci_osc_support_set(u32 flags, const char *hid)
{
- acpi_status retval = AE_NOT_FOUND;
-
- if (!(flags & OSC_SUPPORT_MASKS)) {
+ if (!(flags & OSC_SUPPORT_MASKS))
return AE_TYPE;
- }
- acpi_get_devices(hid,
- acpi_query_osc,
- (void *)(unsigned long)flags,
- (void **) &retval );
+
+ acpi_get_devices(hid, acpi_query_osc,
+ (void *)(unsigned long)flags, NULL);
return AE_OK;
}
@@ -236,10 +179,11 @@ acpi_status __pci_osc_support_set(u32 flags, const char *hid)
**/
acpi_status pci_osc_control_set(acpi_handle handle, u32 flags)
{
- acpi_status status;
- u32 ctrlset;
+ acpi_status status;
+ u32 ctrlset, control_set;
acpi_handle tmp;
struct acpi_osc_data *osc_data;
+ struct acpi_osc_args osc_args;
status = acpi_get_handle(handle, "_OSC", &tmp);
if (ACPI_FAILURE(status))
@@ -252,24 +196,25 @@ acpi_status pci_osc_control_set(acpi_handle handle, u32 flags)
}
ctrlset = (flags & OSC_CONTROL_MASKS);
- if (!ctrlset) {
+ if (!ctrlset)
return AE_TYPE;
- }
- if (osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] &&
- ((osc_data->global_ctrlsets & ctrlset) != ctrlset)) {
+
+ if (osc_data->is_queried &&
+ ((osc_data->query_result & ctrlset) != ctrlset))
return AE_SUPPORT;
- }
- osc_data->ctrlset_buf[OSC_CONTROL_TYPE] |= ctrlset;
- status = acpi_run_osc(handle, osc_data->ctrlset_buf);
- if (ACPI_FAILURE (status)) {
- osc_data->ctrlset_buf[OSC_CONTROL_TYPE] &= ~ctrlset;
- }
-
+
+ control_set = osc_data->control_set | ctrlset;
+ osc_args.capbuf[OSC_QUERY_TYPE] = 0;
+ osc_args.capbuf[OSC_SUPPORT_TYPE] = osc_data->support_set;
+ osc_args.capbuf[OSC_CONTROL_TYPE] = control_set;
+ status = acpi_run_osc(handle, &osc_args);
+ if (ACPI_SUCCESS(status))
+ osc_data->control_set = control_set;
+
return status;
}
EXPORT_SYMBOL(pci_osc_control_set);
-#ifdef CONFIG_ACPI_SLEEP
/*
* _SxD returns the D-state with the highest power
* (lowest D-state number) supported in the S-state "x".
@@ -313,7 +258,13 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
}
return PCI_POWER_ERROR;
}
-#endif
+
+static bool acpi_pci_power_manageable(struct pci_dev *dev)
+{
+ acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
+
+ return handle ? acpi_bus_power_manageable(handle) : false;
+}
static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{
@@ -326,12 +277,11 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
[PCI_D3hot] = ACPI_STATE_D3,
[PCI_D3cold] = ACPI_STATE_D3
};
+ int error = -EINVAL;
- if (!handle)
- return -ENODEV;
/* If the ACPI device has _EJ0, ignore the device */
- if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
- return 0;
+ if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
+ return -ENODEV;
switch (state) {
case PCI_D0:
@@ -339,11 +289,41 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
case PCI_D2:
case PCI_D3hot:
case PCI_D3cold:
- return acpi_bus_set_power(handle, state_conv[state]);
+ error = acpi_bus_set_power(handle, state_conv[state]);
}
- return -EINVAL;
+
+ if (!error)
+ dev_printk(KERN_INFO, &dev->dev,
+ "power state changed by ACPI to D%d\n", state);
+
+ return error;
+}
+
+static bool acpi_pci_can_wakeup(struct pci_dev *dev)
+{
+ acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
+
+ return handle ? acpi_bus_can_wakeup(handle) : false;
+}
+
+static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable)
+{
+ int error = acpi_pm_device_sleep_wake(&dev->dev, enable);
+
+ if (!error)
+ dev_printk(KERN_INFO, &dev->dev,
+ "wake-up capability %s by ACPI\n",
+ enable ? "enabled" : "disabled");
+ return error;
}
+static struct pci_platform_pm_ops acpi_pci_platform_pm = {
+ .is_manageable = acpi_pci_power_manageable,
+ .set_state = acpi_pci_set_power_state,
+ .choose_state = acpi_pci_choose_state,
+ .can_wakeup = acpi_pci_can_wakeup,
+ .sleep_wake = acpi_pci_sleep_wake,
+};
/* ACPI bus type */
static int acpi_pci_find_device(struct device *dev, acpi_handle *handle)
@@ -395,10 +375,7 @@ static int __init acpi_pci_init(void)
ret = register_acpi_bus_type(&acpi_pci_bus);
if (ret)
return 0;
-#ifdef CONFIG_ACPI_SLEEP
- platform_pci_choose_state = acpi_pci_choose_state;
-#endif
- platform_pci_set_power_state = acpi_pci_set_power_state;
+ pci_set_platform_pm(&acpi_pci_platform_pm);
return 0;
}
arch_initcall(acpi_pci_init);
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index e1637bd82b8..a13f5348611 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -274,7 +274,57 @@ static int pci_device_remove(struct device * dev)
return 0;
}
-static int pci_device_suspend(struct device * dev, pm_message_t state)
+static void pci_device_shutdown(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct pci_driver *drv = pci_dev->driver;
+
+ if (drv && drv->shutdown)
+ drv->shutdown(pci_dev);
+ pci_msi_shutdown(pci_dev);
+ pci_msix_shutdown(pci_dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+/*
+ * Default "suspend" method for devices that have no driver provided suspend,
+ * or not even a driver at all.
+ */
+static void pci_default_pm_suspend(struct pci_dev *pci_dev)
+{
+ pci_save_state(pci_dev);
+ /*
+ * mark its power state as "unknown", since we don't know if
+ * e.g. the BIOS will change its device state when we suspend.
+ */
+ if (pci_dev->current_state == PCI_D0)
+ pci_dev->current_state = PCI_UNKNOWN;
+}
+
+/*
+ * Default "resume" method for devices that have no driver provided resume,
+ * or not even a driver at all.
+ */
+static int pci_default_pm_resume(struct pci_dev *pci_dev)
+{
+ int retval = 0;
+
+ /* restore the PCI config space */
+ pci_restore_state(pci_dev);
+ /* if the device was enabled before suspend, reenable */
+ retval = pci_reenable_device(pci_dev);
+ /*
+ * if the device was busmaster before the suspend, make it busmaster
+ * again
+ */
+ if (pci_dev->is_busmaster)
+ pci_set_master(pci_dev);
+
+ return retval;
+}
+
+static int pci_legacy_suspend(struct device *dev, pm_message_t state)
{
struct pci_dev * pci_dev = to_pci_dev(dev);
struct pci_driver * drv = pci_dev->driver;
@@ -284,18 +334,12 @@ static int pci_device_suspend(struct device * dev, pm_message_t state)
i = drv->suspend(pci_dev, state);
suspend_report_result(drv->suspend, i);
} else {
- pci_save_state(pci_dev);
- /*
- * mark its power state as "unknown", since we don't know if
- * e.g. the BIOS will change its device state when we suspend.
- */
- if (pci_dev->current_state == PCI_D0)
- pci_dev->current_state = PCI_UNKNOWN;
+ pci_default_pm_suspend(pci_dev);
}
return i;
}
-static int pci_device_suspend_late(struct device * dev, pm_message_t state)
+static int pci_legacy_suspend_late(struct device *dev, pm_message_t state)
{
struct pci_dev * pci_dev = to_pci_dev(dev);
struct pci_driver * drv = pci_dev->driver;
@@ -308,26 +352,7 @@ static int pci_device_suspend_late(struct device * dev, pm_message_t state)
return i;
}
-/*
- * Default resume method for devices that have no driver provided resume,
- * or not even a driver at all.
- */
-static int pci_default_resume(struct pci_dev *pci_dev)
-{
- int retval = 0;
-
- /* restore the PCI config space */
- pci_restore_state(pci_dev);
- /* if the device was enabled before suspend, reenable */
- retval = pci_reenable_device(pci_dev);
- /* if the device was busmaster before the suspend, make it busmaster again */
- if (pci_dev->is_busmaster)
- pci_set_master(pci_dev);
-
- return retval;
-}
-
-static int pci_device_resume(struct device * dev)
+static int pci_legacy_resume(struct device *dev)
{
int error;
struct pci_dev * pci_dev = to_pci_dev(dev);
@@ -336,34 +361,313 @@ static int pci_device_resume(struct device * dev)
if (drv && drv->resume)
error = drv->resume(pci_dev);
else
- error = pci_default_resume(pci_dev);
+ error = pci_default_pm_resume(pci_dev);
return error;
}
-static int pci_device_resume_early(struct device * dev)
+static int pci_legacy_resume_early(struct device *dev)
{
int error = 0;
struct pci_dev * pci_dev = to_pci_dev(dev);
struct pci_driver * drv = pci_dev->driver;
- pci_fixup_device(pci_fixup_resume, pci_dev);
-
if (drv && drv->resume_early)
error = drv->resume_early(pci_dev);
return error;
}
-static void pci_device_shutdown(struct device *dev)
+static int pci_pm_prepare(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int error = 0;
+
+ if (drv && drv->pm && drv->pm->prepare)
+ error = drv->pm->prepare(dev);
+
+ return error;
+}
+
+static void pci_pm_complete(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+
+ if (drv && drv->pm && drv->pm->complete)
+ drv->pm->complete(dev);
+}
+
+#ifdef CONFIG_SUSPEND
+
+static int pci_pm_suspend(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct device_driver *drv = dev->driver;
+ int error = 0;
+
+ if (drv && drv->pm) {
+ if (drv->pm->suspend) {
+ error = drv->pm->suspend(dev);
+ suspend_report_result(drv->pm->suspend, error);
+ } else {
+ pci_default_pm_suspend(pci_dev);
+ }
+ } else {
+ error = pci_legacy_suspend(dev, PMSG_SUSPEND);
+ }
+ pci_fixup_device(pci_fixup_suspend, pci_dev);
+
+ return error;
+}
+
+static int pci_pm_suspend_noirq(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct pci_driver *drv = pci_dev->driver;
+ int error = 0;
- if (drv && drv->shutdown)
- drv->shutdown(pci_dev);
- pci_msi_shutdown(pci_dev);
- pci_msix_shutdown(pci_dev);
+ if (drv && drv->pm) {
+ if (drv->pm->suspend_noirq) {
+ error = drv->pm->suspend_noirq(dev);
+ suspend_report_result(drv->pm->suspend_noirq, error);
+ }
+ } else {
+ error = pci_legacy_suspend_late(dev, PMSG_SUSPEND);
+ }
+
+ return error;
}
+static int pci_pm_resume(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct device_driver *drv = dev->driver;
+ int error;
+
+ pci_fixup_device(pci_fixup_resume, pci_dev);
+
+ if (drv && drv->pm) {
+ error = drv->pm->resume ? drv->pm->resume(dev) :
+ pci_default_pm_resume(pci_dev);
+ } else {
+ error = pci_legacy_resume(dev);
+ }
+
+ return error;
+}
+
+static int pci_pm_resume_noirq(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct pci_driver *drv = pci_dev->driver;
+ int error = 0;
+
+ pci_fixup_device(pci_fixup_resume_early, pci_dev);
+
+ if (drv && drv->pm) {
+ if (drv->pm->resume_noirq)
+ error = drv->pm->resume_noirq(dev);
+ } else {
+ error = pci_legacy_resume_early(dev);
+ }
+
+ return error;
+}
+
+#else /* !CONFIG_SUSPEND */
+
+#define pci_pm_suspend NULL
+#define pci_pm_suspend_noirq NULL
+#define pci_pm_resume NULL
+#define pci_pm_resume_noirq NULL
+
+#endif /* !CONFIG_SUSPEND */
+
+#ifdef CONFIG_HIBERNATION
+
+static int pci_pm_freeze(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct device_driver *drv = dev->driver;
+ int error = 0;
+
+ if (drv && drv->pm) {
+ if (drv->pm->freeze) {
+ error = drv->pm->freeze(dev);
+ suspend_report_result(drv->pm->freeze, error);
+ } else {
+ pci_default_pm_suspend(pci_dev);
+ }
+ } else {
+ error = pci_legacy_suspend(dev, PMSG_FREEZE);
+ pci_fixup_device(pci_fixup_suspend, pci_dev);
+ }
+
+ return error;
+}
+
+static int pci_pm_freeze_noirq(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct pci_driver *drv = pci_dev->driver;
+ int error = 0;
+
+ if (drv && drv->pm) {
+ if (drv->pm->freeze_noirq) {
+ error = drv->pm->freeze_noirq(dev);
+ suspend_report_result(drv->pm->freeze_noirq, error);
+ }
+ } else {
+ error = pci_legacy_suspend_late(dev, PMSG_FREEZE);
+ }
+
+ return error;
+}
+
+static int pci_pm_thaw(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int error = 0;
+
+ if (drv && drv->pm) {
+ if (drv->pm->thaw)
+ error = drv->pm->thaw(dev);
+ } else {
+ pci_fixup_device(pci_fixup_resume, to_pci_dev(dev));
+ error = pci_legacy_resume(dev);
+ }
+
+ return error;
+}
+
+static int pci_pm_thaw_noirq(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct pci_driver *drv = pci_dev->driver;
+ int error = 0;
+
+ if (drv && drv->pm) {
+ if (drv->pm->thaw_noirq)
+ error = drv->pm->thaw_noirq(dev);
+ } else {
+ pci_fixup_device(pci_fixup_resume_early, pci_dev);
+ error = pci_legacy_resume_early(dev);
+ }
+
+ return error;
+}
+
+static int pci_pm_poweroff(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int error = 0;
+
+ pci_fixup_device(pci_fixup_suspend, to_pci_dev(dev));
+
+ if (drv && drv->pm) {
+ if (drv->pm->poweroff) {
+ error = drv->pm->poweroff(dev);
+ suspend_report_result(drv->pm->poweroff, error);
+ }
+ } else {
+ error = pci_legacy_suspend(dev, PMSG_HIBERNATE);
+ }
+
+ return error;
+}
+
+static int pci_pm_poweroff_noirq(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct pci_driver *drv = pci_dev->driver;
+ int error = 0;
+
+ if (drv && drv->pm) {
+ if (drv->pm->poweroff_noirq) {
+ error = drv->pm->poweroff_noirq(dev);
+ suspend_report_result(drv->pm->poweroff_noirq, error);
+ }
+ } else {
+ error = pci_legacy_suspend_late(dev, PMSG_HIBERNATE);
+ }
+
+ return error;
+}
+
+static int pci_pm_restore(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct device_driver *drv = dev->driver;
+ int error;
+
+ if (drv && drv->pm) {
+ error = drv->pm->restore ? drv->pm->restore(dev) :
+ pci_default_pm_resume(pci_dev);
+ } else {
+ error = pci_legacy_resume(dev);
+ }
+ pci_fixup_device(pci_fixup_resume, pci_dev);
+
+ return error;
+}
+
+static int pci_pm_restore_noirq(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct pci_driver *drv = pci_dev->driver;
+ int error = 0;
+
+ pci_fixup_device(pci_fixup_resume, pci_dev);
+
+ if (drv && drv->pm) {
+ if (drv->pm->restore_noirq)
+ error = drv->pm->restore_noirq(dev);
+ } else {
+ error = pci_legacy_resume_early(dev);
+ }
+ pci_fixup_device(pci_fixup_resume_early, pci_dev);
+
+ return error;
+}
+
+#else /* !CONFIG_HIBERNATION */
+
+#define pci_pm_freeze NULL
+#define pci_pm_freeze_noirq NULL
+#define pci_pm_thaw NULL
+#define pci_pm_thaw_noirq NULL
+#define pci_pm_poweroff NULL
+#define pci_pm_poweroff_noirq NULL
+#define pci_pm_restore NULL
+#define pci_pm_restore_noirq NULL
+
+#endif /* !CONFIG_HIBERNATION */
+
+struct pm_ext_ops pci_pm_ops = {
+ .base = {
+ .prepare = pci_pm_prepare,
+ .complete = pci_pm_complete,
+ .suspend = pci_pm_suspend,
+ .resume = pci_pm_resume,
+ .freeze = pci_pm_freeze,
+ .thaw = pci_pm_thaw,
+ .poweroff = pci_pm_poweroff,
+ .restore = pci_pm_restore,
+ },
+ .suspend_noirq = pci_pm_suspend_noirq,
+ .resume_noirq = pci_pm_resume_noirq,
+ .freeze_noirq = pci_pm_freeze_noirq,
+ .thaw_noirq = pci_pm_thaw_noirq,
+ .poweroff_noirq = pci_pm_poweroff_noirq,
+ .restore_noirq = pci_pm_restore_noirq,
+};
+
+#define PCI_PM_OPS_PTR &pci_pm_ops
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define PCI_PM_OPS_PTR NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
/**
* __pci_register_driver - register a new pci driver
* @drv: the driver structure to register
@@ -386,6 +690,9 @@ int __pci_register_driver(struct pci_driver *drv, struct module *owner,
drv->driver.owner = owner;
drv->driver.mod_name = mod_name;
+ if (drv->pm)
+ drv->driver.pm = &drv->pm->base;
+
spin_lock_init(&drv->dynids.lock);
INIT_LIST_HEAD(&drv->dynids.list);
@@ -511,12 +818,9 @@ struct bus_type pci_bus_type = {
.uevent = pci_uevent,
.probe = pci_device_probe,
.remove = pci_device_remove,
- .suspend = pci_device_suspend,
- .suspend_late = pci_device_suspend_late,
- .resume_early = pci_device_resume_early,
- .resume = pci_device_resume,
.shutdown = pci_device_shutdown,
.dev_attrs = pci_dev_attrs,
+ .pm = PCI_PM_OPS_PTR,
};
static int __init pci_driver_init(void)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 75c60239cad..44a46c92b72 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1,6 +1,4 @@
/*
- * $Id: pci.c,v 1.91 1999/01/21 13:34:01 davem Exp $
- *
* PCI Bus Services, see include/linux/pci.h for further explanation.
*
* Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter,
@@ -19,6 +17,7 @@
#include <linux/string.h>
#include <linux/log2.h>
#include <linux/pci-aspm.h>
+#include <linux/pm_wakeup.h>
#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
@@ -378,74 +377,90 @@ pci_restore_bars(struct pci_dev *dev)
pci_update_resource(dev, &dev->resource[i], i);
}
-int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t);
+static struct pci_platform_pm_ops *pci_platform_pm;
-/**
- * pci_set_power_state - Set the power state of a PCI device
- * @dev: PCI device to be suspended
- * @state: PCI power state (D0, D1, D2, D3hot, D3cold) we're entering
- *
- * Transition a device to a new power state, using the Power Management
- * Capabilities in the device's config space.
- *
- * RETURN VALUE:
- * -EINVAL if trying to enter a lower state than we're already in.
- * 0 if we're already in the requested state.
- * -EIO if device does not support PCI PM.
- * 0 if we can successfully change the power state.
- */
-int
-pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+int pci_set_platform_pm(struct pci_platform_pm_ops *ops)
{
- int pm, need_restore = 0;
- u16 pmcsr, pmc;
+ if (!ops->is_manageable || !ops->set_state || !ops->choose_state
+ || !ops->sleep_wake || !ops->can_wakeup)
+ return -EINVAL;
+ pci_platform_pm = ops;
+ return 0;
+}
- /* bound the state we're entering */
- if (state > PCI_D3hot)
- state = PCI_D3hot;
+static inline bool platform_pci_power_manageable(struct pci_dev *dev)
+{
+ return pci_platform_pm ? pci_platform_pm->is_manageable(dev) : false;
+}
- /*
- * If the device or the parent bridge can't support PCI PM, ignore
- * the request if we're doing anything besides putting it into D0
- * (which would only happen on boot).
- */
- if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
- return 0;
+static inline int platform_pci_set_power_state(struct pci_dev *dev,
+ pci_power_t t)
+{
+ return pci_platform_pm ? pci_platform_pm->set_state(dev, t) : -ENOSYS;
+}
- /* find PCI PM capability in list */
- pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev)
+{
+ return pci_platform_pm ?
+ pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR;
+}
- /* abort if the device doesn't support PM capabilities */
- if (!pm)
+static inline bool platform_pci_can_wakeup(struct pci_dev *dev)
+{
+ return pci_platform_pm ? pci_platform_pm->can_wakeup(dev) : false;
+}
+
+static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
+{
+ return pci_platform_pm ?
+ pci_platform_pm->sleep_wake(dev, enable) : -ENODEV;
+}
+
+/**
+ * pci_raw_set_power_state - Use PCI PM registers to set the power state of
+ * given PCI device
+ * @dev: PCI device to handle.
+ * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ *
+ * RETURN VALUE:
+ * -EINVAL if the requested state is invalid.
+ * -EIO if device does not support PCI PM or its PM capabilities register has a
+ * wrong version, or device doesn't support the requested state.
+ * 0 if device already is in the requested state.
+ * 0 if device's power state has been successfully changed.
+ */
+static int
+pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
+{
+ u16 pmcsr;
+ bool need_restore = false;
+
+ if (!dev->pm_cap)
return -EIO;
+ if (state < PCI_D0 || state > PCI_D3hot)
+ return -EINVAL;
+
/* Validate current state:
* Can enter D0 from any state, but if we can only go deeper
* to sleep if we're already in a low power state
*/
- if (state != PCI_D0 && dev->current_state > state) {
- printk(KERN_ERR "%s(): %s: state=%d, current state=%d\n",
- __func__, pci_name(dev), state, dev->current_state);
+ if (dev->current_state == state) {
+ /* we're already there */
+ return 0;
+ } else if (state != PCI_D0 && dev->current_state <= PCI_D3cold
+ && dev->current_state > state) {
+ dev_err(&dev->dev, "invalid power transition "
+ "(from state %d to %d)\n", dev->current_state, state);
return -EINVAL;
- } else if (dev->current_state == state)
- return 0; /* we're already there */
-
-
- pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc);
- if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
- printk(KERN_DEBUG
- "PCI: %s has unsupported PM cap regs version (%u)\n",
- pci_name(dev), pmc & PCI_PM_CAP_VER_MASK);
- return -EIO;
}
/* check if this device supports the desired state */
- if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1))
- return -EIO;
- else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))
+ if ((state == PCI_D1 && !dev->d1_support)
+ || (state == PCI_D2 && !dev->d2_support))
return -EIO;
- pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
/* If we're (effectively) in D3, force entire word to 0.
* This doesn't affect PME_Status, disables PME_En, and
@@ -461,7 +476,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
case PCI_UNKNOWN: /* Boot-up */
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
&& !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
- need_restore = 1;
+ need_restore = true;
/* Fall-through: force to D0 */
default:
pmcsr = 0;
@@ -469,7 +484,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
}
/* enter specified state */
- pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr);
+ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
/* Mandatory power management transition delays */
/* see PCI PM 1.1 5.6.1 table 18 */
@@ -478,13 +493,6 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
else if (state == PCI_D2 || dev->current_state == PCI_D2)
udelay(200);
- /*
- * Give firmware a chance to be called, such as ACPI _PRx, _PSx
- * Firmware method after native method ?
- */
- if (platform_pci_set_power_state)
- platform_pci_set_power_state(dev, state);
-
dev->current_state = state;
/* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
@@ -508,8 +516,77 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
return 0;
}
-pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev);
-
+/**
+ * pci_update_current_state - Read PCI power state of given device from its
+ * PCI PM registers and cache it
+ * @dev: PCI device to handle.
+ */
+static void pci_update_current_state(struct pci_dev *dev)
+{
+ if (dev->pm_cap) {
+ u16 pmcsr;
+
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+ dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+ }
+}
+
+/**
+ * pci_set_power_state - Set the power state of a PCI device
+ * @dev: PCI device to handle.
+ * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ *
+ * Transition a device to a new power state, using the platform formware and/or
+ * the device's PCI PM registers.
+ *
+ * RETURN VALUE:
+ * -EINVAL if the requested state is invalid.
+ * -EIO if device does not support PCI PM or its PM capabilities register has a
+ * wrong version, or device doesn't support the requested state.
+ * 0 if device already is in the requested state.
+ * 0 if device's power state has been successfully changed.
+ */
+int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+{
+ int error;
+
+ /* bound the state we're entering */
+ if (state > PCI_D3hot)
+ state = PCI_D3hot;
+ else if (state < PCI_D0)
+ state = PCI_D0;
+ else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
+ /*
+ * If the device or the parent bridge do not support PCI PM,
+ * ignore the request if we're doing anything other than putting
+ * it into D0 (which would only happen on boot).
+ */
+ return 0;
+
+ if (state == PCI_D0 && platform_pci_power_manageable(dev)) {
+ /*
+ * Allow the platform to change the state, for example via ACPI
+ * _PR0, _PS0 and some such, but do not trust it.
+ */
+ int ret = platform_pci_set_power_state(dev, PCI_D0);
+ if (!ret)
+ pci_update_current_state(dev);
+ }
+
+ error = pci_raw_set_power_state(dev, state);
+
+ if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
+ /* Allow the platform to finalize the transition */
+ int ret = platform_pci_set_power_state(dev, state);
+ if (!ret) {
+ pci_update_current_state(dev);
+ error = 0;
+ }
+ }
+
+ return error;
+}
+
/**
* pci_choose_state - Choose the power state of a PCI device
* @dev: PCI device to be suspended
@@ -527,11 +604,9 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
if (!pci_find_capability(dev, PCI_CAP_ID_PM))
return PCI_D0;
- if (platform_pci_choose_state) {
- ret = platform_pci_choose_state(dev);
- if (ret != PCI_POWER_ERROR)
- return ret;
- }
+ ret = platform_pci_choose_state(dev);
+ if (ret != PCI_POWER_ERROR)
+ return ret;
switch (state.event) {
case PM_EVENT_ON:
@@ -543,7 +618,8 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
case PM_EVENT_HIBERNATE:
return PCI_D3hot;
default:
- printk("Unrecognized suspend event %d\n", state.event);
+ dev_info(&dev->dev, "unrecognized suspend event %d\n",
+ state.event);
BUG();
}
return PCI_D0;
@@ -568,7 +644,7 @@ static int pci_save_pcie_state(struct pci_dev *dev)
else
found = 1;
if (!save_state) {
- dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n");
+ dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n");
return -ENOMEM;
}
cap = (u16 *)&save_state->data[0];
@@ -619,7 +695,7 @@ static int pci_save_pcix_state(struct pci_dev *dev)
else
found = 1;
if (!save_state) {
- dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n");
+ dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n");
return -ENOMEM;
}
cap = (u16 *)&save_state->data[0];
@@ -685,10 +761,9 @@ pci_restore_state(struct pci_dev *dev)
for (i = 15; i >= 0; i--) {
pci_read_config_dword(dev, i * 4, &val);
if (val != dev->saved_config_space[i]) {
- printk(KERN_DEBUG "PM: Writing back config space on "
- "device %s at offset %x (was %x, writing %x)\n",
- pci_name(dev), i,
- val, (int)dev->saved_config_space[i]);
+ dev_printk(KERN_DEBUG, &dev->dev, "restoring config "
+ "space at offset %#x (was %#x, writing %#x)\n",
+ i, val, (int)dev->saved_config_space[i]);
pci_write_config_dword(dev,i * 4,
dev->saved_config_space[i]);
}
@@ -961,6 +1036,46 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
}
/**
+ * pci_pme_capable - check the capability of PCI device to generate PME#
+ * @dev: PCI device to handle.
+ * @state: PCI state from which device will issue PME#.
+ */
+static bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
+{
+ if (!dev->pm_cap)
+ return false;
+
+ return !!(dev->pme_support & (1 << state));
+}
+
+/**
+ * pci_pme_active - enable or disable PCI device's PME# function
+ * @dev: PCI device to handle.
+ * @enable: 'true' to enable PME# generation; 'false' to disable it.
+ *
+ * The caller must verify that the device is capable of generating PME# before
+ * calling this function with @enable equal to 'true'.
+ */
+static void pci_pme_active(struct pci_dev *dev, bool enable)
+{
+ u16 pmcsr;
+
+ if (!dev->pm_cap)
+ return;
+
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+ /* Clear PME_Status by writing 1 to it and enable PME# */
+ pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
+ if (!enable)
+ pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
+
+ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
+
+ dev_printk(KERN_INFO, &dev->dev, "PME# %s\n",
+ enable ? "enabled" : "disabled");
+}
+
+/**
* pci_enable_wake - enable PCI device as wakeup event source
* @dev: PCI device affected
* @state: PCI state from which device will issue wakeup events
@@ -971,66 +1086,173 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
* called automatically by this routine.
*
* Devices with legacy power management (no standard PCI PM capabilities)
- * always require such platform hooks. Depending on the platform, devices
- * supporting the standard PCI PME# signal may require such platform hooks;
- * they always update bits in config space to allow PME# generation.
+ * always require such platform hooks.
*
- * -EIO is returned if the device can't ever be a wakeup event source.
- * -EINVAL is returned if the device can't generate wakeup events from
- * the specified PCI state. Returns zero if the operation is successful.
+ * RETURN VALUE:
+ * 0 is returned on success
+ * -EINVAL is returned if device is not supposed to wake up the system
+ * Error code depending on the platform is returned if both the platform and
+ * the native mechanism fail to enable the generation of wake-up events
*/
int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
{
- int pm;
- int status;
- u16 value;
-
- /* Note that drivers should verify device_may_wakeup(&dev->dev)
- * before calling this function. Platform code should report
- * errors when drivers try to enable wakeup on devices that
- * can't issue wakeups, or on which wakeups were disabled by
- * userspace updating the /sys/devices.../power/wakeup file.
+ int error = 0;
+ bool pme_done = false;
+
+ if (!device_may_wakeup(&dev->dev))
+ return -EINVAL;
+
+ /*
+ * According to "PCI System Architecture" 4th ed. by Tom Shanley & Don
+ * Anderson we should be doing PME# wake enable followed by ACPI wake
+ * enable. To disable wake-up we call the platform first, for symmetry.
*/
- status = call_platform_enable_wakeup(&dev->dev, enable);
+ if (!enable && platform_pci_can_wakeup(dev))
+ error = platform_pci_sleep_wake(dev, false);
- /* find PCI PM capability in list */
- pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ if (!enable || pci_pme_capable(dev, state)) {
+ pci_pme_active(dev, enable);
+ pme_done = true;
+ }
- /* If device doesn't support PM Capabilities, but caller wants to
- * disable wake events, it's a NOP. Otherwise fail unless the
- * platform hooks handled this legacy device already.
- */
- if (!pm)
- return enable ? status : 0;
+ if (enable && platform_pci_can_wakeup(dev))
+ error = platform_pci_sleep_wake(dev, true);
- /* Check device's ability to generate PME# */
- pci_read_config_word(dev,pm+PCI_PM_PMC,&value);
+ return pme_done ? 0 : error;
+}
- value &= PCI_PM_CAP_PME_MASK;
- value >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */
+/**
+ * pci_prepare_to_sleep - prepare PCI device for system-wide transition into
+ * a sleep state
+ * @dev: Device to handle.
+ *
+ * Choose the power state appropriate for the device depending on whether
+ * it can wake up the system and/or is power manageable by the platform
+ * (PCI_D3hot is the default) and put the device into that state.
+ */
+int pci_prepare_to_sleep(struct pci_dev *dev)
+{
+ pci_power_t target_state = PCI_D3hot;
+ int error;
- /* Check if it can generate PME# from requested state. */
- if (!value || !(value & (1 << state))) {
- /* if it can't, revert what the platform hook changed,
- * always reporting the base "EINVAL, can't PME#" error
+ if (platform_pci_power_manageable(dev)) {
+ /*
+ * Call the platform to choose the target state of the device
+ * and enable wake-up from this state if supported.
*/
- if (enable)
- call_platform_enable_wakeup(&dev->dev, 0);
- return enable ? -EINVAL : 0;
+ pci_power_t state = platform_pci_choose_state(dev);
+
+ switch (state) {
+ case PCI_POWER_ERROR:
+ case PCI_UNKNOWN:
+ break;
+ case PCI_D1:
+ case PCI_D2:
+ if (pci_no_d1d2(dev))
+ break;
+ default:
+ target_state = state;
+ }
+ } else if (device_may_wakeup(&dev->dev)) {
+ /*
+ * Find the deepest state from which the device can generate
+ * wake-up events, make it the target state and enable device
+ * to generate PME#.
+ */
+ if (!dev->pm_cap)
+ return -EIO;
+
+ if (dev->pme_support) {
+ while (target_state
+ && !(dev->pme_support & (1 << target_state)))
+ target_state--;
+ }
}
- pci_read_config_word(dev, pm + PCI_PM_CTRL, &value);
+ pci_enable_wake(dev, target_state, true);
- /* Clear PME_Status by writing 1 to it and enable PME# */
- value |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
+ error = pci_set_power_state(dev, target_state);
- if (!enable)
- value &= ~PCI_PM_CTRL_PME_ENABLE;
+ if (error)
+ pci_enable_wake(dev, target_state, false);
- pci_write_config_word(dev, pm + PCI_PM_CTRL, value);
+ return error;
+}
- return 0;
+/**
+ * pci_back_from_sleep - turn PCI device on during system-wide transition into
+ * the working state a sleep state
+ * @dev: Device to handle.
+ *
+ * Disable device's sytem wake-up capability and put it into D0.
+ */
+int pci_back_from_sleep(struct pci_dev *dev)
+{
+ pci_enable_wake(dev, PCI_D0, false);
+ return pci_set_power_state(dev, PCI_D0);
+}
+
+/**
+ * pci_pm_init - Initialize PM functions of given PCI device
+ * @dev: PCI device to handle.
+ */
+void pci_pm_init(struct pci_dev *dev)
+{
+ int pm;
+ u16 pmc;
+
+ dev->pm_cap = 0;
+
+ /* find PCI PM capability in list */
+ pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ if (!pm)
+ return;
+ /* Check device's ability to generate PME# */
+ pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc);
+
+ if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
+ dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n",
+ pmc & PCI_PM_CAP_VER_MASK);
+ return;
+ }
+
+ dev->pm_cap = pm;
+
+ dev->d1_support = false;
+ dev->d2_support = false;
+ if (!pci_no_d1d2(dev)) {
+ if (pmc & PCI_PM_CAP_D1) {
+ dev_printk(KERN_DEBUG, &dev->dev, "supports D1\n");
+ dev->d1_support = true;
+ }
+ if (pmc & PCI_PM_CAP_D2) {
+ dev_printk(KERN_DEBUG, &dev->dev, "supports D2\n");
+ dev->d2_support = true;
+ }
+ }
+
+ pmc &= PCI_PM_CAP_PME_MASK;
+ if (pmc) {
+ dev_printk(KERN_INFO, &dev->dev,
+ "PME# supported from%s%s%s%s%s\n",
+ (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "",
+ (pmc & PCI_PM_CAP_PME_D1) ? " D1" : "",
+ (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "",
+ (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
+ (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
+ dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT;
+ /*
+ * Make device's PM flags reflect the wake-up capability, but
+ * let the user space enable it to wake up the system as needed.
+ */
+ device_set_wakeup_capable(&dev->dev, true);
+ device_set_wakeup_enable(&dev->dev, false);
+ /* Disable the PME# generation functionality */
+ pci_pme_active(dev, false);
+ } else {
+ dev->pme_support = 0;
+ }
}
int
@@ -1116,13 +1338,11 @@ int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name)
return 0;
err_out:
- printk (KERN_WARNING "PCI: Unable to reserve %s region #%d:%llx@%llx "
- "for device %s\n",
- pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem",
- bar + 1, /* PCI BAR # */
- (unsigned long long)pci_resource_len(pdev, bar),
- (unsigned long long)pci_resource_start(pdev, bar),
- pci_name(pdev));
+ dev_warn(&pdev->dev, "BAR %d: can't reserve %s region [%#llx-%#llx]\n",
+ bar,
+ pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem",
+ (unsigned long long)pci_resource_start(pdev, bar),
+ (unsigned long long)pci_resource_end(pdev, bar));
return -EBUSY;
}
@@ -1214,7 +1434,7 @@ pci_set_master(struct pci_dev *dev)
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_MASTER)) {
- pr_debug("PCI: Enabling bus mastering for device %s\n", pci_name(dev));
+ dev_dbg(&dev->dev, "enabling bus mastering\n");
cmd |= PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
@@ -1279,8 +1499,8 @@ pci_set_cacheline_size(struct pci_dev *dev)
if (cacheline_size == pci_cache_line_size)
return 0;
- printk(KERN_DEBUG "PCI: cache line size of %d is not supported "
- "by device %s\n", pci_cache_line_size << 2, pci_name(dev));
+ dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not "
+ "supported\n", pci_cache_line_size << 2);
return -EINVAL;
}
@@ -1305,8 +1525,7 @@ pci_set_mwi(struct pci_dev *dev)
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_INVALIDATE)) {
- pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n",
- pci_name(dev));
+ dev_dbg(&dev->dev, "enabling Mem-Wr-Inval\n");
cmd |= PCI_COMMAND_INVALIDATE;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
@@ -1702,5 +1921,7 @@ EXPORT_SYMBOL(pci_set_power_state);
EXPORT_SYMBOL(pci_save_state);
EXPORT_SYMBOL(pci_restore_state);
EXPORT_SYMBOL(pci_enable_wake);
+EXPORT_SYMBOL(pci_prepare_to_sleep);
+EXPORT_SYMBOL(pci_back_from_sleep);
EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 312daff834b..d807cd786f2 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -5,10 +5,36 @@ extern int pci_create_sysfs_dev_files(struct pci_dev *pdev);
extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev);
extern void pci_cleanup_rom(struct pci_dev *dev);
-/* Firmware callbacks */
-extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev);
-extern int (*platform_pci_set_power_state)(struct pci_dev *dev,
- pci_power_t state);
+/**
+ * Firmware PM callbacks
+ *
+ * @is_manageable - returns 'true' if given device is power manageable by the
+ * platform firmware
+ *
+ * @set_state - invokes the platform firmware to set the device's power state
+ *
+ * @choose_state - returns PCI power state of given device preferred by the
+ * platform; to be used during system-wide transitions from a
+ * sleeping state to the working state and vice versa
+ *
+ * @can_wakeup - returns 'true' if given device is capable of waking up the
+ * system from a sleeping state
+ *
+ * @sleep_wake - enables/disables the system wake up capability of given device
+ *
+ * If given platform is generally capable of power managing PCI devices, all of
+ * these callbacks are mandatory.
+ */
+struct pci_platform_pm_ops {
+ bool (*is_manageable)(struct pci_dev *dev);
+ int (*set_state)(struct pci_dev *dev, pci_power_t state);
+ pci_power_t (*choose_state)(struct pci_dev *dev);
+ bool (*can_wakeup)(struct pci_dev *dev);
+ int (*sleep_wake)(struct pci_dev *dev, bool enable);
+};
+
+extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops);
+extern void pci_pm_init(struct pci_dev *dev);
extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
@@ -105,3 +131,16 @@ pci_match_one_device(const struct pci_device_id *id, const struct pci_dev *dev)
}
struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
+
+/* PCI slot sysfs helper code */
+#define to_pci_slot(s) container_of(s, struct pci_slot, kobj)
+
+extern struct kset *pci_slots_kset;
+
+struct pci_slot_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct pci_slot *, char *);
+ ssize_t (*store)(struct pci_slot *, const char *, size_t);
+};
+#define to_pci_slot_attr(s) container_of(s, struct pci_slot_attribute, attr)
+
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index 07c3bdb6edc..77036f46acf 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -26,6 +26,7 @@
#include <linux/pcieport_if.h>
#include "aerdrv.h"
+#include "../../pci.h"
/*
* Version Information
@@ -219,8 +220,7 @@ static int __devinit aer_probe (struct pcie_device *dev,
/* Alloc rpc data structure */
if (!(rpc = aer_alloc_rpc(dev))) {
- printk(KERN_DEBUG "%s: Alloc rpc fails on PCIE device[%s]\n",
- __func__, device->bus_id);
+ dev_printk(KERN_DEBUG, device, "alloc rpc failed\n");
aer_remove(dev);
return -ENOMEM;
}
@@ -228,8 +228,7 @@ static int __devinit aer_probe (struct pcie_device *dev,
/* Request IRQ ISR */
if ((status = request_irq(dev->irq, aer_irq, IRQF_SHARED, "aerdrv",
dev))) {
- printk(KERN_DEBUG "%s: Request ISR fails on PCIE device[%s]\n",
- __func__, device->bus_id);
+ dev_printk(KERN_DEBUG, device, "request IRQ failed\n");
aer_remove(dev);
return status;
}
@@ -273,7 +272,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
* to issue Configuration Requests to those devices.
*/
msleep(200);
- printk(KERN_DEBUG "Complete link reset at Root[%s]\n", dev->dev.bus_id);
+ dev_printk(KERN_DEBUG, &dev->dev, "Root Port link has been reset\n");
/* Enable Root Port's interrupt in response to error messages */
pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status);
diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c
index d39a78dbd02..30f581b8791 100644
--- a/drivers/pci/pcie/aer/aerdrv_acpi.c
+++ b/drivers/pci/pcie/aer/aerdrv_acpi.c
@@ -50,10 +50,10 @@ int aer_osc_setup(struct pcie_device *pciedev)
}
if (ACPI_FAILURE(status)) {
- printk(KERN_DEBUG "AER service couldn't init device %s - %s\n",
- pciedev->device.bus_id,
- (status == AE_SUPPORT || status == AE_NOT_FOUND) ?
- "no _OSC support" : "Run ACPI _OSC fails");
+ dev_printk(KERN_DEBUG, &pciedev->device, "AER service couldn't "
+ "init device: %s\n",
+ (status == AE_SUPPORT || status == AE_NOT_FOUND) ?
+ "no _OSC support" : "_OSC failed");
return -1;
}
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index aaa82392d1d..ee5e7b5176d 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -221,9 +221,9 @@ static void report_error_detected(struct pci_dev *dev, void *data)
* of a driver for this device is unaware of
* its hw state.
*/
- printk(KERN_DEBUG "Device ID[%s] has %s\n",
- dev->dev.bus_id, (dev->driver) ?
- "no AER-aware driver" : "no driver");
+ dev_printk(KERN_DEBUG, &dev->dev, "device has %s\n",
+ dev->driver ?
+ "no AER-aware driver" : "no driver");
}
return;
}
@@ -304,7 +304,7 @@ static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
{
struct aer_broadcast_data result_data;
- printk(KERN_DEBUG "Broadcast %s message\n", error_mesg);
+ dev_printk(KERN_DEBUG, &dev->dev, "broadcast %s message\n", error_mesg);
result_data.state = state;
if (cb == report_error_detected)
result_data.result = PCI_ERS_RESULT_CAN_RECOVER;
@@ -404,18 +404,16 @@ static pci_ers_result_t reset_link(struct pcie_device *aerdev,
data.aer_driver =
to_service_driver(aerdev->device.driver);
} else {
- printk(KERN_DEBUG "No link-reset support to Device ID"
- "[%s]\n",
- dev->dev.bus_id);
+ dev_printk(KERN_DEBUG, &dev->dev, "no link-reset "
+ "support\n");
return PCI_ERS_RESULT_DISCONNECT;
}
}
status = data.aer_driver->reset_link(udev);
if (status != PCI_ERS_RESULT_RECOVERED) {
- printk(KERN_DEBUG "Link reset at upstream Device ID"
- "[%s] failed\n",
- udev->dev.bus_id);
+ dev_printk(KERN_DEBUG, &dev->dev, "link reset at upstream "
+ "device %s failed\n", pci_name(udev));
return PCI_ERS_RESULT_DISCONNECT;
}
@@ -511,10 +509,12 @@ static void handle_error_source(struct pcie_device * aerdev,
} else {
status = do_recovery(aerdev, dev, info.severity);
if (status == PCI_ERS_RESULT_RECOVERED) {
- printk(KERN_DEBUG "AER driver successfully recovered\n");
+ dev_printk(KERN_DEBUG, &dev->dev, "AER driver "
+ "successfully recovered\n");
} else {
/* TODO: Should kernel panic here? */
- printk(KERN_DEBUG "AER driver didn't recover\n");
+ dev_printk(KERN_DEBUG, &dev->dev, "AER driver didn't "
+ "recover\n");
}
}
}
diff --git a/drivers/pci/pcie/portdrv_bus.c b/drivers/pci/pcie/portdrv_bus.c
index 3f0976868ed..359fe5568df 100644
--- a/drivers/pci/pcie/portdrv_bus.c
+++ b/drivers/pci/pcie/portdrv_bus.c
@@ -13,6 +13,7 @@
#include <linux/pm.h>
#include <linux/pcieport_if.h>
+#include "portdrv.h"
static int pcie_port_bus_match(struct device *dev, struct device_driver *drv);
static int pcie_port_bus_suspend(struct device *dev, pm_message_t state);
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index fb0abfa508d..890f0d2b370 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -23,20 +23,20 @@ static int pcie_port_probe_service(struct device *dev)
{
struct pcie_device *pciedev;
struct pcie_port_service_driver *driver;
- int status = -ENODEV;
+ int status;
if (!dev || !dev->driver)
- return status;
+ return -ENODEV;
driver = to_service_driver(dev->driver);
if (!driver || !driver->probe)
- return status;
+ return -ENODEV;
pciedev = to_pcie_device(dev);
status = driver->probe(pciedev, driver->id_table);
if (!status) {
- printk(KERN_DEBUG "Load service driver %s on pcie device %s\n",
- driver->name, dev->bus_id);
+ dev_printk(KERN_DEBUG, dev, "service driver %s loaded\n",
+ driver->name);
get_device(dev);
}
return status;
@@ -53,8 +53,8 @@ static int pcie_port_remove_service(struct device *dev)
pciedev = to_pcie_device(dev);
driver = to_service_driver(dev->driver);
if (driver && driver->remove) {
- printk(KERN_DEBUG "Unload service driver %s on pcie device %s\n",
- driver->name, dev->bus_id);
+ dev_printk(KERN_DEBUG, dev, "unloading service driver %s\n",
+ driver->name);
driver->remove(pciedev);
put_device(dev);
}
@@ -103,7 +103,7 @@ static int pcie_port_resume_service(struct device *dev)
*/
static void release_pcie_device(struct device *dev)
{
- printk(KERN_DEBUG "Free Port Service[%s]\n", dev->bus_id);
+ dev_printk(KERN_DEBUG, dev, "free port service\n");
kfree(to_pcie_device(dev));
}
@@ -150,7 +150,7 @@ static int assign_interrupt_mode(struct pci_dev *dev, int *vectors, int mask)
if (pos) {
struct msix_entry msix_entries[PCIE_PORT_DEVICE_MAXSERVICES] =
{{0, 0}, {0, 1}, {0, 2}, {0, 3}};
- printk("%s Found MSIX capability\n", __func__);
+ dev_info(&dev->dev, "found MSI-X capability\n");
status = pci_enable_msix(dev, msix_entries, nvec);
if (!status) {
int j = 0;
@@ -165,7 +165,7 @@ static int assign_interrupt_mode(struct pci_dev *dev, int *vectors, int mask)
if (status) {
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
if (pos) {
- printk("%s Found MSI capability\n", __func__);
+ dev_info(&dev->dev, "found MSI capability\n");
status = pci_enable_msi(dev);
if (!status) {
interrupt_mode = PCIE_PORT_MSI_MODE;
@@ -252,7 +252,7 @@ static struct pcie_device* alloc_pcie_device(struct pci_dev *parent,
return NULL;
pcie_device_init(parent, device, port_type, service_type, irq,irq_mode);
- printk(KERN_DEBUG "Allocate Port Service[%s]\n", device->device.bus_id);
+ dev_printk(KERN_DEBUG, &device->device, "allocate port service\n");
return device;
}
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 51d163238d9..367c9c20000 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -91,9 +91,8 @@ static int __devinit pcie_portdrv_probe (struct pci_dev *dev,
pci_set_master(dev);
if (!dev->irq && dev->pin) {
- printk(KERN_WARNING
- "%s->Dev[%04x:%04x] has invalid IRQ. Check vendor BIOS\n",
- __func__, dev->vendor, dev->device);
+ dev_warn(&dev->dev, "device [%04x/%04x] has invalid IRQ; "
+ "check vendor BIOS\n", dev->vendor, dev->device);
}
if (pcie_port_device_register(dev)) {
pci_disable_device(dev);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 3706ce7972d..b1724cf31b6 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -277,8 +277,8 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
res->end = res->start + sz64;
#else
if (sz64 > 0x100000000ULL) {
- printk(KERN_ERR "PCI: Unable to handle 64-bit "
- "BAR for device %s\n", pci_name(dev));
+ dev_err(&dev->dev, "BAR %d: can't handle 64-bit"
+ " BAR\n", pos);
res->start = 0;
res->flags = 0;
} else if (lhi) {
@@ -329,7 +329,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
return;
if (dev->transparent) {
- printk(KERN_INFO "PCI: Transparent bridge - %s\n", pci_name(dev));
+ dev_info(&dev->dev, "transparent bridge\n");
for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
child->resource[i] = child->parent->resource[i - 3];
}
@@ -392,7 +392,8 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
limit |= ((long) mem_limit_hi) << 32;
#else
if (mem_base_hi || mem_limit_hi) {
- printk(KERN_ERR "PCI: Unable to handle 64-bit address space for bridge %s\n", pci_name(dev));
+ dev_err(&dev->dev, "can't handle 64-bit "
+ "address space for bridge\n");
return;
}
#endif
@@ -414,6 +415,7 @@ static struct pci_bus * pci_alloc_bus(void)
INIT_LIST_HEAD(&b->node);
INIT_LIST_HEAD(&b->children);
INIT_LIST_HEAD(&b->devices);
+ INIT_LIST_HEAD(&b->slots);
}
return b;
}
@@ -511,8 +513,8 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
- pr_debug("PCI: Scanning behind PCI bridge %s, config %06x, pass %d\n",
- pci_name(dev), buses & 0xffffff, pass);
+ dev_dbg(&dev->dev, "scanning behind bridge, config %06x, pass %d\n",
+ buses & 0xffffff, pass);
/* Disable MasterAbortMode during probing to avoid reporting
of bus errors (in some architectures) */
@@ -535,8 +537,8 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
* ignore it. This can happen with the i450NX chipset.
*/
if (pci_find_bus(pci_domain_nr(bus), busnr)) {
- printk(KERN_INFO "PCI: Bus %04x:%02x already known\n",
- pci_domain_nr(bus), busnr);
+ dev_info(&dev->dev, "bus %04x:%02x already known\n",
+ pci_domain_nr(bus), busnr);
goto out;
}
@@ -711,8 +713,9 @@ static int pci_setup_device(struct pci_dev * dev)
{
u32 class;
- sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
+ dev->bus->number, PCI_SLOT(dev->devfn),
+ PCI_FUNC(dev->devfn));
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
dev->revision = class & 0xff;
@@ -720,7 +723,7 @@ static int pci_setup_device(struct pci_dev * dev)
dev->class = class;
class >>= 8;
- pr_debug("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev),
+ dev_dbg(&dev->dev, "found [%04x/%04x] class %06x header type %02x\n",
dev->vendor, dev->device, class, dev->hdr_type);
/* "Unknown power state" */
@@ -788,13 +791,13 @@ static int pci_setup_device(struct pci_dev * dev)
break;
default: /* unknown header */
- printk(KERN_ERR "PCI: device %s has unknown header type %02x, ignoring.\n",
- pci_name(dev), dev->hdr_type);
+ dev_err(&dev->dev, "unknown header type %02x, "
+ "ignoring device\n", dev->hdr_type);
return -1;
bad:
- printk(KERN_ERR "PCI: %s: class %x doesn't match header type %02x. Ignoring class.\n",
- pci_name(dev), class, dev->hdr_type);
+ dev_err(&dev->dev, "ignoring class %02x (doesn't match header "
+ "type %02x)\n", class, dev->hdr_type);
dev->class = PCI_CLASS_NOT_DEFINED;
}
@@ -927,7 +930,7 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
return NULL;
/* Card hasn't responded in 60 seconds? Must be stuck. */
if (delay > 60 * 1000) {
- printk(KERN_WARNING "Device %04x:%02x:%02x.%d not "
+ printk(KERN_WARNING "pci %04x:%02x:%02x.%d: not "
"responding\n", pci_domain_nr(bus),
bus->number, PCI_SLOT(devfn),
PCI_FUNC(devfn));
@@ -984,6 +987,9 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
/* Fix up broken headers */
pci_fixup_device(pci_fixup_header, dev);
+ /* Initialize power management of the device */
+ pci_pm_init(dev);
+
/*
* Add the device to our list of discovered devices
* and the bus list for fixup functions, etc.
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index 963a97642ae..4400dffbd93 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -1,6 +1,4 @@
/*
- * $Id: proc.c,v 1.13 1998/05/12 07:36:07 mj Exp $
- *
* Procfs interface for the PCI bus.
*
* Copyright (c) 1997--1999 Martin Mares <mj@ucw.cz>
@@ -482,5 +480,5 @@ static int __init pci_proc_init(void)
return 0;
}
-__initcall(pci_proc_init);
+device_initcall(pci_proc_init);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 338a3f94b4d..12d489395fa 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -556,7 +556,7 @@ static void quirk_via_ioapic(struct pci_dev *dev)
pci_write_config_byte (dev, 0x58, tmp);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic);
/*
* VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit.
@@ -576,7 +576,7 @@ static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
/*
* The AMD io apic can hang the box when an apic irq is masked.
@@ -622,7 +622,7 @@ static void quirk_amd_8131_ioapic(struct pci_dev *dev)
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
#endif /* CONFIG_X86_IO_APIC */
/*
@@ -774,7 +774,7 @@ static void quirk_cardbus_legacy(struct pci_dev *dev)
pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
}
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
-DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
/*
* Following the PCI ordering rules is optional on the AMD762. I'm not
@@ -797,7 +797,7 @@ static void quirk_amd_ordering(struct pci_dev *dev)
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
/*
* DreamWorks provided workaround for Dunord I-3000 problem
@@ -865,7 +865,7 @@ static void quirk_disable_pxb(struct pci_dev *pdev)
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev)
{
@@ -885,9 +885,9 @@ static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev)
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
/*
* Serverworks CSB5 IDE does not fully support native mode
@@ -1054,6 +1054,20 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
* its on-board VGA controller */
asus_hides_smbus = 1;
}
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_IG)
+ switch(dev->subsystem_device) {
+ case 0x00b8: /* Compaq Evo D510 CMT */
+ case 0x00b9: /* Compaq Evo D510 SFF */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC)
+ switch (dev->subsystem_device) {
+ case 0x001A: /* Compaq Deskpro EN SSF P667 815E */
+ /* Motherboard doesn't have host bridge
+ * subvendor/subdevice IDs, therefore checking
+ * its on-board VGA controller */
+ asus_hides_smbus = 1;
+ }
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge);
@@ -1068,6 +1082,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, as
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_IG, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge);
static void asus_hides_smbus_lpc(struct pci_dev *dev)
{
@@ -1093,31 +1109,61 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asu
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc);
-static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
+/* It appears we just have one such device. If not, we have a warning */
+static void __iomem *asus_rcba_base;
+static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev)
{
- u32 val, rcba;
- void __iomem *base;
+ u32 rcba;
if (likely(!asus_hides_smbus))
return;
+ WARN_ON(asus_rcba_base);
+
pci_read_config_dword(dev, 0xF0, &rcba);
- base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); /* use bits 31:14, 16 kB aligned */
- if (base == NULL) return;
- val=readl(base + 0x3418); /* read the Function Disable register, dword mode only */
- writel(val & 0xFFFFFFF7, base + 0x3418); /* enable the SMBus device */
- iounmap(base);
+ /* use bits 31:14, 16 kB aligned */
+ asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000);
+ if (asus_rcba_base == NULL)
+ return;
+}
+
+static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev)
+{
+ u32 val;
+
+ if (likely(!asus_hides_smbus || !asus_rcba_base))
+ return;
+ /* read the Function Disable register, dword mode only */
+ val = readl(asus_rcba_base + 0x3418);
+ writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */
+}
+
+static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev)
+{
+ if (likely(!asus_hides_smbus || !asus_rcba_base))
+ return;
+ iounmap(asus_rcba_base);
+ asus_rcba_base = NULL;
dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n");
}
+
+static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
+{
+ asus_hides_smbus_lpc_ich6_suspend(dev);
+ asus_hides_smbus_lpc_ich6_resume_early(dev);
+ asus_hides_smbus_lpc_ich6_resume(dev);
+}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6);
+DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early);
/*
* SiS 96x south bridge: BIOS typically hides SMBus device...
@@ -1135,10 +1181,10 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus);
/*
* ... This is further complicated by the fact that some SiS96x south
@@ -1172,7 +1218,7 @@ static void quirk_sis_503(struct pci_dev *dev)
quirk_sis_96x_smbus(dev);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503);
/*
@@ -1205,7 +1251,7 @@ static void asus_hides_ac97_lpc(struct pci_dev *dev)
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
@@ -1270,12 +1316,12 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, qui
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
#endif
@@ -1521,6 +1567,10 @@ extern struct pci_fixup __start_pci_fixups_enable[];
extern struct pci_fixup __end_pci_fixups_enable[];
extern struct pci_fixup __start_pci_fixups_resume[];
extern struct pci_fixup __end_pci_fixups_resume[];
+extern struct pci_fixup __start_pci_fixups_resume_early[];
+extern struct pci_fixup __end_pci_fixups_resume_early[];
+extern struct pci_fixup __start_pci_fixups_suspend[];
+extern struct pci_fixup __end_pci_fixups_suspend[];
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
@@ -1553,6 +1603,16 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
end = __end_pci_fixups_resume;
break;
+ case pci_fixup_resume_early:
+ start = __start_pci_fixups_resume_early;
+ end = __end_pci_fixups_resume_early;
+ break;
+
+ case pci_fixup_suspend:
+ start = __start_pci_fixups_suspend;
+ end = __end_pci_fixups_suspend;
+ break;
+
default:
/* stupid compiler warning, you would think with an enum... */
return;
@@ -1629,7 +1689,7 @@ static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
quirk_nvidia_ck804_pcie_aer_ext_cap);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
quirk_nvidia_ck804_pcie_aer_ext_cap);
static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 8ddb918f5f5..827c0a520e2 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -27,13 +27,6 @@
#include <linux/slab.h>
-#define DEBUG_CONFIG 1
-#if DEBUG_CONFIG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
static void pbus_assign_resources_sorted(struct pci_bus *bus)
{
struct pci_dev *dev;
@@ -81,8 +74,8 @@ void pci_setup_cardbus(struct pci_bus *bus)
struct pci_dev *bridge = bus->self;
struct pci_bus_region region;
- printk("PCI: Bus %d, cardbus bridge: %s\n",
- bus->number, pci_name(bridge));
+ dev_info(&bridge->dev, "CardBus bridge, secondary bus %04x:%02x\n",
+ pci_domain_nr(bus), bus->number);
pcibios_resource_to_bus(bridge, &region, bus->resource[0]);
if (bus->resource[0]->flags & IORESOURCE_IO) {
@@ -90,7 +83,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
* The IO resource is allocated a range twice as large as it
* would normally need. This allows us to set both IO regs.
*/
- printk(KERN_INFO " IO window: 0x%08lx-0x%08lx\n",
+ dev_info(&bridge->dev, " IO window: %#08lx-%#08lx\n",
(unsigned long)region.start,
(unsigned long)region.end);
pci_write_config_dword(bridge, PCI_CB_IO_BASE_0,
@@ -101,7 +94,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
pcibios_resource_to_bus(bridge, &region, bus->resource[1]);
if (bus->resource[1]->flags & IORESOURCE_IO) {
- printk(KERN_INFO " IO window: 0x%08lx-0x%08lx\n",
+ dev_info(&bridge->dev, " IO window: %#08lx-%#08lx\n",
(unsigned long)region.start,
(unsigned long)region.end);
pci_write_config_dword(bridge, PCI_CB_IO_BASE_1,
@@ -112,7 +105,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
pcibios_resource_to_bus(bridge, &region, bus->resource[2]);
if (bus->resource[2]->flags & IORESOURCE_MEM) {
- printk(KERN_INFO " PREFETCH window: 0x%08lx-0x%08lx\n",
+ dev_info(&bridge->dev, " PREFETCH window: %#08lx-%#08lx\n",
(unsigned long)region.start,
(unsigned long)region.end);
pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_0,
@@ -123,7 +116,7 @@ void pci_setup_cardbus(struct pci_bus *bus)
pcibios_resource_to_bus(bridge, &region, bus->resource[3]);
if (bus->resource[3]->flags & IORESOURCE_MEM) {
- printk(KERN_INFO " MEM window: 0x%08lx-0x%08lx\n",
+ dev_info(&bridge->dev, " MEM window: %#08lx-%#08lx\n",
(unsigned long)region.start,
(unsigned long)region.end);
pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_1,
@@ -151,7 +144,8 @@ static void pci_setup_bridge(struct pci_bus *bus)
struct pci_bus_region region;
u32 l, bu, lu, io_upper16;
- DBG(KERN_INFO "PCI: Bridge: %s\n", pci_name(bridge));
+ dev_info(&bridge->dev, "PCI bridge, secondary bus %04x:%02x\n",
+ pci_domain_nr(bus), bus->number);
/* Set up the top and bottom of the PCI I/O segment for this bus. */
pcibios_resource_to_bus(bridge, &region, bus->resource[0]);
@@ -162,7 +156,7 @@ static void pci_setup_bridge(struct pci_bus *bus)
l |= region.end & 0xf000;
/* Set up upper 16 bits of I/O base/limit. */
io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
- DBG(KERN_INFO " IO window: %04lx-%04lx\n",
+ dev_info(&bridge->dev, " IO window: %#04lx-%#04lx\n",
(unsigned long)region.start,
(unsigned long)region.end);
}
@@ -170,7 +164,7 @@ static void pci_setup_bridge(struct pci_bus *bus)
/* Clear upper 16 bits of I/O base/limit. */
io_upper16 = 0;
l = 0x00f0;
- DBG(KERN_INFO " IO window: disabled.\n");
+ dev_info(&bridge->dev, " IO window: disabled\n");
}
/* Temporarily disable the I/O range before updating PCI_IO_BASE. */
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, 0x0000ffff);
@@ -185,13 +179,13 @@ static void pci_setup_bridge(struct pci_bus *bus)
if (bus->resource[1]->flags & IORESOURCE_MEM) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
- DBG(KERN_INFO " MEM window: 0x%08lx-0x%08lx\n",
+ dev_info(&bridge->dev, " MEM window: %#08lx-%#08lx\n",
(unsigned long)region.start,
(unsigned long)region.end);
}
else {
l = 0x0000fff0;
- DBG(KERN_INFO " MEM window: disabled.\n");
+ dev_info(&bridge->dev, " MEM window: disabled\n");
}
pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
@@ -208,13 +202,13 @@ static void pci_setup_bridge(struct pci_bus *bus)
l |= region.end & 0xfff00000;
bu = upper_32_bits(region.start);
lu = upper_32_bits(region.end);
- DBG(KERN_INFO " PREFETCH window: 0x%016llx-0x%016llx\n",
+ dev_info(&bridge->dev, " PREFETCH window: %#016llx-%#016llx\n",
(unsigned long long)region.start,
(unsigned long long)region.end);
}
else {
l = 0x0000fff0;
- DBG(KERN_INFO " PREFETCH window: disabled.\n");
+ dev_info(&bridge->dev, " PREFETCH window: disabled\n");
}
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
@@ -361,9 +355,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long
align = (i < PCI_BRIDGE_RESOURCES) ? r_size : r->start;
order = __ffs(align) - 20;
if (order > 11) {
- printk(KERN_WARNING "PCI: region %s/%d "
- "too large: 0x%016llx-0x%016llx\n",
- pci_name(dev), i,
+ dev_warn(&dev->dev, "BAR %d too large: "
+ "%#016llx-%#016llx\n", i,
(unsigned long long)r->start,
(unsigned long long)r->end);
r->flags = 0;
@@ -529,8 +522,8 @@ void __ref pci_bus_assign_resources(struct pci_bus *bus)
break;
default:
- printk(KERN_INFO "PCI: not setting up bridge %s "
- "for bus %d\n", pci_name(dev), b->number);
+ dev_info(&dev->dev, "not setting up bridge for bus "
+ "%04x:%02x\n", pci_domain_nr(b), b->number);
break;
}
}
diff --git a/drivers/pci/setup-irq.c b/drivers/pci/setup-irq.c
index 05ca2ed9eb5..aa795fd428d 100644
--- a/drivers/pci/setup-irq.c
+++ b/drivers/pci/setup-irq.c
@@ -47,8 +47,7 @@ pdev_fixup_irq(struct pci_dev *dev,
}
dev->irq = irq;
- pr_debug("PCI: fixup irq: (%s) got %d\n",
- kobject_name(&dev->dev.kobj), dev->irq);
+ dev_dbg(&dev->dev, "fixup irq: got %d\n", dev->irq);
/* Always tell the device, so the driver knows what is
the real IRQ to use; the device does not use it. */
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 7d35cdf4579..1a5fc83c71b 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -26,8 +26,7 @@
#include "pci.h"
-void
-pci_update_resource(struct pci_dev *dev, struct resource *res, int resno)
+void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno)
{
struct pci_bus_region region;
u32 new, check, mask;
@@ -43,20 +42,20 @@ pci_update_resource(struct pci_dev *dev, struct resource *res, int resno)
/*
* Ignore non-moveable resources. This might be legacy resources for
* which no functional BAR register exists or another important
- * system resource we should better not move around in system address
- * space.
+ * system resource we shouldn't move around.
*/
if (res->flags & IORESOURCE_PCI_FIXED)
return;
pcibios_resource_to_bus(dev, &region, res);
- pr_debug(" got res [%llx:%llx] bus [%llx:%llx] flags %lx for "
- "BAR %d of %s\n", (unsigned long long)res->start,
+ dev_dbg(&dev->dev, "BAR %d: got res [%#llx-%#llx] bus [%#llx-%#llx] "
+ "flags %#lx\n", resno,
+ (unsigned long long)res->start,
(unsigned long long)res->end,
(unsigned long long)region.start,
(unsigned long long)region.end,
- (unsigned long)res->flags, resno, pci_name(dev));
+ (unsigned long)res->flags);
new = region.start | (res->flags & PCI_REGION_FLAG_MASK);
if (res->flags & IORESOURCE_IO)
@@ -81,9 +80,8 @@ pci_update_resource(struct pci_dev *dev, struct resource *res, int resno)
pci_read_config_dword(dev, reg, &check);
if ((new ^ check) & mask) {
- printk(KERN_ERR "PCI: Error while updating region "
- "%s/%d (%08x != %08x)\n", pci_name(dev), resno,
- new, check);
+ dev_err(&dev->dev, "BAR %d: error updating (%#08x != %#08x)\n",
+ resno, new, check);
}
if ((new & (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK)) ==
@@ -92,15 +90,14 @@ pci_update_resource(struct pci_dev *dev, struct resource *res, int resno)
pci_write_config_dword(dev, reg + 4, new);
pci_read_config_dword(dev, reg + 4, &check);
if (check != new) {
- printk(KERN_ERR "PCI: Error updating region "
- "%s/%d (high %08x != %08x)\n",
- pci_name(dev), resno, new, check);
+ dev_err(&dev->dev, "BAR %d: error updating "
+ "(high %#08x != %#08x)\n", resno, new, check);
}
}
res->flags &= ~IORESOURCE_UNSET;
- pr_debug("PCI: moved device %s resource %d (%lx) to %x\n",
- pci_name(dev), resno, res->flags,
- new & ~PCI_REGION_FLAG_MASK);
+ dev_dbg(&dev->dev, "BAR %d: moved to bus [%#llx-%#llx] flags %#lx\n",
+ resno, (unsigned long long)region.start,
+ (unsigned long long)region.end, res->flags);
}
int pci_claim_resource(struct pci_dev *dev, int resource)
@@ -117,10 +114,11 @@ int pci_claim_resource(struct pci_dev *dev, int resource)
err = insert_resource(root, res);
if (err) {
- printk(KERN_ERR "PCI: %s region %d of %s %s [%llx:%llx]\n",
- root ? "Address space collision on" :
- "No parent found for",
- resource, dtype, pci_name(dev),
+ dev_err(&dev->dev, "BAR %d: %s of %s [%#llx-%#llx]\n",
+ resource,
+ root ? "address space collision on" :
+ "no parent found for",
+ dtype,
(unsigned long long)res->start,
(unsigned long long)res->end);
}
@@ -140,11 +138,10 @@ int pci_assign_resource(struct pci_dev *dev, int resno)
align = resource_alignment(res);
if (!align) {
- printk(KERN_ERR "PCI: Cannot allocate resource (bogus "
- "alignment) %d [%llx:%llx] (flags %lx) of %s\n",
+ dev_err(&dev->dev, "BAR %d: can't allocate resource (bogus "
+ "alignment) [%#llx-%#llx] flags %#lx\n",
resno, (unsigned long long)res->start,
- (unsigned long long)res->end, res->flags,
- pci_name(dev));
+ (unsigned long long)res->end, res->flags);
return -EINVAL;
}
@@ -165,11 +162,11 @@ int pci_assign_resource(struct pci_dev *dev, int resno)
}
if (ret) {
- printk(KERN_ERR "PCI: Failed to allocate %s resource "
- "#%d:%llx@%llx for %s\n",
+ dev_err(&dev->dev, "BAR %d: can't allocate %s resource "
+ "[%#llx-%#llx]\n", resno,
res->flags & IORESOURCE_IO ? "I/O" : "mem",
- resno, (unsigned long long)size,
- (unsigned long long)res->start, pci_name(dev));
+ (unsigned long long)res->start,
+ (unsigned long long)res->end);
} else {
res->flags &= ~IORESOURCE_STARTALIGN;
if (resno < PCI_BRIDGE_RESOURCES)
@@ -205,11 +202,11 @@ int pci_assign_resource_fixed(struct pci_dev *dev, int resno)
}
if (ret) {
- printk(KERN_ERR "PCI: Failed to allocate %s resource "
- "#%d:%llx@%llx for %s\n",
+ dev_err(&dev->dev, "BAR %d: can't allocate %s resource "
+ "[%#llx-%#llx\n]", resno,
res->flags & IORESOURCE_IO ? "I/O" : "mem",
- resno, (unsigned long long)(res->end - res->start + 1),
- (unsigned long long)res->start, pci_name(dev));
+ (unsigned long long)res->start,
+ (unsigned long long)res->end);
} else if (resno < PCI_BRIDGE_RESOURCES) {
pci_update_resource(dev, res, resno);
}
@@ -239,11 +236,10 @@ void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head)
r_align = resource_alignment(r);
if (!r_align) {
- printk(KERN_WARNING "PCI: bogus alignment of resource "
- "%d [%llx:%llx] (flags %lx) of %s\n",
+ dev_warn(&dev->dev, "BAR %d: bogus alignment "
+ "[%#llx-%#llx] flags %#lx\n",
i, (unsigned long long)r->start,
- (unsigned long long)r->end, r->flags,
- pci_name(dev));
+ (unsigned long long)r->end, r->flags);
continue;
}
for (list = head; ; list = list->next) {
@@ -291,7 +287,7 @@ int pci_enable_resources(struct pci_dev *dev, int mask)
if (!r->parent) {
dev_err(&dev->dev, "device not available because of "
- "BAR %d [%llx:%llx] collisions\n", i,
+ "BAR %d [%#llx-%#llx] collisions\n", i,
(unsigned long long) r->start,
(unsigned long long) r->end);
return -EINVAL;
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
new file mode 100644
index 00000000000..7e5b85cbd94
--- /dev/null
+++ b/drivers/pci/slot.c
@@ -0,0 +1,233 @@
+/*
+ * drivers/pci/slot.c
+ * Copyright (C) 2006 Matthew Wilcox <matthew@wil.cx>
+ * Copyright (C) 2006-2008 Hewlett-Packard Development Company, L.P.
+ * Alex Chiang <achiang@hp.com>
+ */
+
+#include <linux/kobject.h>
+#include <linux/pci.h>
+#include <linux/err.h>
+#include "pci.h"
+
+struct kset *pci_slots_kset;
+EXPORT_SYMBOL_GPL(pci_slots_kset);
+
+static ssize_t pci_slot_attr_show(struct kobject *kobj,
+ struct attribute *attr, char *buf)
+{
+ struct pci_slot *slot = to_pci_slot(kobj);
+ struct pci_slot_attribute *attribute = to_pci_slot_attr(attr);
+ return attribute->show ? attribute->show(slot, buf) : -EIO;
+}
+
+static ssize_t pci_slot_attr_store(struct kobject *kobj,
+ struct attribute *attr, const char *buf, size_t len)
+{
+ struct pci_slot *slot = to_pci_slot(kobj);
+ struct pci_slot_attribute *attribute = to_pci_slot_attr(attr);
+ return attribute->store ? attribute->store(slot, buf, len) : -EIO;
+}
+
+static struct sysfs_ops pci_slot_sysfs_ops = {
+ .show = pci_slot_attr_show,
+ .store = pci_slot_attr_store,
+};
+
+static ssize_t address_read_file(struct pci_slot *slot, char *buf)
+{
+ if (slot->number == 0xff)
+ return sprintf(buf, "%04x:%02x\n",
+ pci_domain_nr(slot->bus),
+ slot->bus->number);
+ else
+ return sprintf(buf, "%04x:%02x:%02x\n",
+ pci_domain_nr(slot->bus),
+ slot->bus->number,
+ slot->number);
+}
+
+static void pci_slot_release(struct kobject *kobj)
+{
+ struct pci_slot *slot = to_pci_slot(kobj);
+
+ pr_debug("%s: releasing pci_slot on %x:%d\n", __func__,
+ slot->bus->number, slot->number);
+
+ list_del(&slot->list);
+
+ kfree(slot);
+}
+
+static struct pci_slot_attribute pci_slot_attr_address =
+ __ATTR(address, (S_IFREG | S_IRUGO), address_read_file, NULL);
+
+static struct attribute *pci_slot_default_attrs[] = {
+ &pci_slot_attr_address.attr,
+ NULL,
+};
+
+static struct kobj_type pci_slot_ktype = {
+ .sysfs_ops = &pci_slot_sysfs_ops,
+ .release = &pci_slot_release,
+ .default_attrs = pci_slot_default_attrs,
+};
+
+/**
+ * pci_create_slot - create or increment refcount for physical PCI slot
+ * @parent: struct pci_bus of parent bridge
+ * @slot_nr: PCI_SLOT(pci_dev->devfn) or -1 for placeholder
+ * @name: user visible string presented in /sys/bus/pci/slots/<name>
+ *
+ * PCI slots have first class attributes such as address, speed, width,
+ * and a &struct pci_slot is used to manage them. This interface will
+ * either return a new &struct pci_slot to the caller, or if the pci_slot
+ * already exists, its refcount will be incremented.
+ *
+ * Slots are uniquely identified by a @pci_bus, @slot_nr, @name tuple.
+ *
+ * Placeholder slots:
+ * In most cases, @pci_bus, @slot_nr will be sufficient to uniquely identify
+ * a slot. There is one notable exception - pSeries (rpaphp), where the
+ * @slot_nr cannot be determined until a device is actually inserted into
+ * the slot. In this scenario, the caller may pass -1 for @slot_nr.
+ *
+ * The following semantics are imposed when the caller passes @slot_nr ==
+ * -1. First, the check for existing %struct pci_slot is skipped, as the
+ * caller may know about several unpopulated slots on a given %struct
+ * pci_bus, and each slot would have a @slot_nr of -1. Uniqueness for
+ * these slots is then determined by the @name parameter. We expect
+ * kobject_init_and_add() to warn us if the caller attempts to create
+ * multiple slots with the same name. The other change in semantics is
+ * user-visible, which is the 'address' parameter presented in sysfs will
+ * consist solely of a dddd:bb tuple, where dddd is the PCI domain of the
+ * %struct pci_bus and bb is the bus number. In other words, the devfn of
+ * the 'placeholder' slot will not be displayed.
+ */
+
+struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
+ const char *name)
+{
+ struct pci_slot *slot;
+ int err;
+
+ down_write(&pci_bus_sem);
+
+ if (slot_nr == -1)
+ goto placeholder;
+
+ /* If we've already created this slot, bump refcount and return. */
+ list_for_each_entry(slot, &parent->slots, list) {
+ if (slot->number == slot_nr) {
+ kobject_get(&slot->kobj);
+ pr_debug("%s: inc refcount to %d on %04x:%02x:%02x\n",
+ __func__,
+ atomic_read(&slot->kobj.kref.refcount),
+ pci_domain_nr(parent), parent->number,
+ slot_nr);
+ goto out;
+ }
+ }
+
+placeholder:
+ slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+ if (!slot) {
+ slot = ERR_PTR(-ENOMEM);
+ goto out;
+ }
+
+ slot->bus = parent;
+ slot->number = slot_nr;
+
+ slot->kobj.kset = pci_slots_kset;
+ err = kobject_init_and_add(&slot->kobj, &pci_slot_ktype, NULL,
+ "%s", name);
+ if (err) {
+ printk(KERN_ERR "Unable to register kobject %s\n", name);
+ goto err;
+ }
+
+ INIT_LIST_HEAD(&slot->list);
+ list_add(&slot->list, &parent->slots);
+
+ /* Don't care if debug printk has a -1 for slot_nr */
+ pr_debug("%s: created pci_slot on %04x:%02x:%02x\n",
+ __func__, pci_domain_nr(parent), parent->number, slot_nr);
+
+ out:
+ up_write(&pci_bus_sem);
+ return slot;
+ err:
+ kfree(slot);
+ slot = ERR_PTR(err);
+ goto out;
+}
+EXPORT_SYMBOL_GPL(pci_create_slot);
+
+/**
+ * pci_update_slot_number - update %struct pci_slot -> number
+ * @slot - %struct pci_slot to update
+ * @slot_nr - new number for slot
+ *
+ * The primary purpose of this interface is to allow callers who earlier
+ * created a placeholder slot in pci_create_slot() by passing a -1 as
+ * slot_nr, to update their %struct pci_slot with the correct @slot_nr.
+ */
+
+void pci_update_slot_number(struct pci_slot *slot, int slot_nr)
+{
+ int name_count = 0;
+ struct pci_slot *tmp;
+
+ down_write(&pci_bus_sem);
+
+ list_for_each_entry(tmp, &slot->bus->slots, list) {
+ WARN_ON(tmp->number == slot_nr);
+ if (!strcmp(kobject_name(&tmp->kobj), kobject_name(&slot->kobj)))
+ name_count++;
+ }
+
+ if (name_count > 1)
+ printk(KERN_WARNING "pci_update_slot_number found %d slots with the same name: %s\n", name_count, kobject_name(&slot->kobj));
+
+ slot->number = slot_nr;
+ up_write(&pci_bus_sem);
+}
+EXPORT_SYMBOL_GPL(pci_update_slot_number);
+
+/**
+ * pci_destroy_slot - decrement refcount for physical PCI slot
+ * @slot: struct pci_slot to decrement
+ *
+ * %struct pci_slot is refcounted, so destroying them is really easy; we
+ * just call kobject_put on its kobj and let our release methods do the
+ * rest.
+ */
+
+void pci_destroy_slot(struct pci_slot *slot)
+{
+ pr_debug("%s: dec refcount to %d on %04x:%02x:%02x\n", __func__,
+ atomic_read(&slot->kobj.kref.refcount) - 1,
+ pci_domain_nr(slot->bus), slot->bus->number, slot->number);
+
+ down_write(&pci_bus_sem);
+ kobject_put(&slot->kobj);
+ up_write(&pci_bus_sem);
+}
+EXPORT_SYMBOL_GPL(pci_destroy_slot);
+
+static int pci_slot_init(void)
+{
+ struct kset *pci_bus_kset;
+
+ pci_bus_kset = bus_get_kset(&pci_bus_type);
+ pci_slots_kset = kset_create_and_add("slots", NULL,
+ &pci_bus_kset->kobj);
+ if (!pci_slots_kset) {
+ printk(KERN_ERR "PCI: Slot initialization failure\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+subsys_initcall(pci_slot_init);
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index db90a74f871..a5ac0bc7f52 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -259,6 +259,7 @@ struct acpi_device_perf {
/* Wakeup Management */
struct acpi_device_wakeup_flags {
u8 valid:1; /* Can successfully enable wakeup? */
+ u8 prepared:1; /* Has the wake-up capability been enabled? */
u8 run_wake:1; /* Run-Wake GPE devices */
};
@@ -335,6 +336,8 @@ void acpi_bus_data_handler(acpi_handle handle, u32 function, void *context);
int acpi_bus_get_status(struct acpi_device *device);
int acpi_bus_get_power(acpi_handle handle, int *state);
int acpi_bus_set_power(acpi_handle handle, int state);
+bool acpi_bus_power_manageable(acpi_handle handle);
+bool acpi_bus_can_wakeup(acpi_handle handle);
#ifdef CONFIG_ACPI_PROC_EVENT
int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data);
int acpi_bus_generate_proc_event4(const char *class, const char *bid, u8 type, int data);
@@ -377,6 +380,7 @@ acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
#ifdef CONFIG_PM_SLEEP
int acpi_pm_device_sleep_state(struct device *, int *);
+int acpi_pm_device_sleep_wake(struct device *, bool);
#else /* !CONFIG_PM_SLEEP */
static inline int acpi_pm_device_sleep_state(struct device *d, int *p)
{
@@ -384,6 +388,10 @@ static inline int acpi_pm_device_sleep_state(struct device *d, int *p)
*p = ACPI_STATE_D0;
return ACPI_STATE_D3;
}
+static inline int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+ return -ENODEV;
+}
#endif /* !CONFIG_PM_SLEEP */
#endif /* CONFIG_ACPI */
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index 9757a040a50..e5f38e5ce86 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -87,7 +87,9 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_device *device, int domain,
-------------------------------------------------------------------------- */
#ifdef CONFIG_ACPI_POWER
-int acpi_enable_wakeup_device_power(struct acpi_device *dev);
+int acpi_device_sleep_wake(struct acpi_device *dev,
+ int enable, int sleep_state, int dev_state);
+int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state);
int acpi_disable_wakeup_device_power(struct acpi_device *dev);
int acpi_power_get_inferred_state(struct acpi_device *device);
int acpi_power_transition(struct acpi_device *device, int state);
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index b20409404c7..729f6b0a60e 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -86,6 +86,12 @@
VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \
*(.pci_fixup_resume) \
VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \
+ VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .; \
+ *(.pci_fixup_resume_early) \
+ VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .; \
+ VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .; \
+ *(.pci_fixup_suspend) \
+ VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .; \
} \
\
/* Built-in firmware blobs */ \
diff --git a/include/asm-x86/pci-direct.h b/include/asm-x86/pci-direct.h
index 5b21485be57..80c775d9fe2 100644
--- a/include/asm-x86/pci-direct.h
+++ b/include/asm-x86/pci-direct.h
@@ -11,7 +11,11 @@ extern u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset);
extern u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset);
extern void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, u32 val);
extern void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val);
+extern void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val);
extern int early_pci_allowed(void);
+extern unsigned int pci_early_dump_regs;
+extern void early_dump_pci_device(u8 bus, u8 slot, u8 func);
+extern void early_dump_pci_devices(void);
#endif
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 0601075d09a..a1717763937 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -235,6 +235,9 @@ int acpi_check_region(resource_size_t start, resource_size_t n,
int acpi_check_mem_region(resource_size_t start, resource_size_t n,
const char *name);
+#ifdef CONFIG_PM_SLEEP
+void __init acpi_old_suspend_ordering(void);
+#endif /* CONFIG_PM_SLEEP */
#else /* CONFIG_ACPI */
static inline int early_acpi_boot_init(void)
diff --git a/include/linux/device.h b/include/linux/device.h
index 6a2d04c011b..f71a78d123a 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -68,6 +68,8 @@ struct bus_type {
int (*resume_early)(struct device *dev);
int (*resume)(struct device *dev);
+ struct pm_ext_ops *pm;
+
struct bus_type_private *p;
};
@@ -131,6 +133,8 @@ struct device_driver {
int (*resume) (struct device *dev);
struct attribute_group **groups;
+ struct pm_ops *pm;
+
struct driver_private *p;
};
@@ -197,6 +201,8 @@ struct class {
int (*suspend)(struct device *dev, pm_message_t state);
int (*resume)(struct device *dev);
+
+ struct pm_ops *pm;
};
extern int __must_check class_register(struct class *class);
@@ -248,8 +254,11 @@ struct device_type {
struct attribute_group **groups;
int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
void (*release)(struct device *dev);
+
int (*suspend)(struct device *dev, pm_message_t state);
int (*resume)(struct device *dev);
+
+ struct pm_ops *pm;
};
/* interface for exporting device attributes */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index d18b1dd49fa..a6a088e1a80 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -17,8 +17,7 @@
#ifndef LINUX_PCI_H
#define LINUX_PCI_H
-/* Include the pci register defines */
-#include <linux/pci_regs.h>
+#include <linux/pci_regs.h> /* The pci register defines */
/*
* The PCI interface treats multi-function devices as independent
@@ -49,12 +48,22 @@
#include <linux/list.h>
#include <linux/compiler.h>
#include <linux/errno.h>
+#include <linux/kobject.h>
#include <asm/atomic.h>
#include <linux/device.h>
/* Include the ID list */
#include <linux/pci_ids.h>
+/* pci_slot represents a physical slot */
+struct pci_slot {
+ struct pci_bus *bus; /* The bus this slot is on */
+ struct list_head list; /* node in list of slots on this bus */
+ struct hotplug_slot *hotplug; /* Hotplug info (migrate over time) */
+ unsigned char number; /* PCI_SLOT(pci_dev->devfn) */
+ struct kobject kobj;
+};
+
/* File state for mmap()s on /proc/bus/pci/X/Y */
enum pci_mmap_state {
pci_mmap_io,
@@ -142,6 +151,7 @@ struct pci_dev {
void *sysdata; /* hook for sys-specific extension */
struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */
+ struct pci_slot *slot; /* Physical slot this device is in */
unsigned int devfn; /* encoded device & function index */
unsigned short vendor;
@@ -167,6 +177,13 @@ struct pci_dev {
pci_power_t current_state; /* Current operating state. In ACPI-speak,
this is D0-D3, D0 being fully functional,
and D3 being off. */
+ int pm_cap; /* PM capability offset in the
+ configuration space */
+ unsigned int pme_support:5; /* Bitmask of states from which PME#
+ can be generated */
+ unsigned int d1_support:1; /* Low power state D1 is supported */
+ unsigned int d2_support:1; /* Low power state D2 is supported */
+ unsigned int no_d1d2:1; /* Only allow D0 and D3 */
#ifdef CONFIG_PCIEASPM
struct pcie_link_state *link_state; /* ASPM link state. */
@@ -191,7 +208,6 @@ struct pci_dev {
unsigned int is_added:1;
unsigned int is_busmaster:1; /* device is busmaster */
unsigned int no_msi:1; /* device may not use msi */
- unsigned int no_d1d2:1; /* only allow d0 or d3 */
unsigned int block_ucfg_access:1; /* userspace config space access is blocked */
unsigned int broken_parity_status:1; /* Device generates false positive parity */
unsigned int msi_enabled:1;
@@ -267,6 +283,7 @@ struct pci_bus {
struct list_head children; /* list of child buses */
struct list_head devices; /* list of devices on this bus */
struct pci_dev *self; /* bridge device as seen by parent */
+ struct list_head slots; /* list of slots on this bus */
struct resource *resource[PCI_BUS_NUM_RESOURCES];
/* address space routed to this bus */
@@ -328,7 +345,7 @@ struct pci_bus_region {
struct pci_dynids {
spinlock_t lock; /* protects list, index */
struct list_head list; /* for IDs added at runtime */
- unsigned int use_driver_data:1; /* pci_driver->driver_data is used */
+ unsigned int use_driver_data:1; /* pci_device_id->driver_data is used */
};
/* ---------------------------------------------------------------- */
@@ -390,7 +407,7 @@ struct pci_driver {
int (*resume_early) (struct pci_dev *dev);
int (*resume) (struct pci_dev *dev); /* Device woken up */
void (*shutdown) (struct pci_dev *dev);
-
+ struct pm_ext_ops *pm;
struct pci_error_handlers *err_handler;
struct device_driver driver;
struct pci_dynids dynids;
@@ -489,6 +506,10 @@ struct pci_bus *pci_create_bus(struct device *parent, int bus,
struct pci_ops *ops, void *sysdata);
struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
int busnr);
+struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
+ const char *name);
+void pci_destroy_slot(struct pci_slot *slot);
+void pci_update_slot_number(struct pci_slot *slot, int slot_nr);
int pci_scan_slot(struct pci_bus *bus, int devfn);
struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn);
void pci_device_add(struct pci_dev *dev, struct pci_bus *bus);
@@ -618,6 +639,8 @@ int pci_restore_state(struct pci_dev *dev);
int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
+int pci_prepare_to_sleep(struct pci_dev *dev);
+int pci_back_from_sleep(struct pci_dev *dev);
/* Functions for PCI Hotplug drivers to use */
int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap);
@@ -839,6 +862,11 @@ static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
return -EIO;
}
+static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+ return -EIO;
+}
+
static inline int pci_set_dma_max_seg_size(struct pci_dev *dev,
unsigned int size)
{
@@ -977,9 +1005,9 @@ static inline void pci_set_drvdata(struct pci_dev *pdev, void *data)
/* If you want to know what to call your pci_dev, ask this function.
* Again, it's a wrapper around the generic device.
*/
-static inline char *pci_name(struct pci_dev *pdev)
+static inline const char *pci_name(struct pci_dev *pdev)
{
- return pdev->dev.bus_id;
+ return dev_name(&pdev->dev);
}
@@ -1014,7 +1042,9 @@ enum pci_fixup_pass {
pci_fixup_header, /* After reading configuration header */
pci_fixup_final, /* Final phase of device fixups */
pci_fixup_enable, /* pci_enable_device() time */
- pci_fixup_resume, /* pci_enable_device() time */
+ pci_fixup_resume, /* pci_device_resume() */
+ pci_fixup_suspend, /* pci_device_suspend */
+ pci_fixup_resume_early, /* pci_device_resume_early() */
};
/* Anonymous variables would be nice... */
@@ -1036,6 +1066,12 @@ enum pci_fixup_pass {
#define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \
resume##vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \
+ resume_early##vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \
+ suspend##vendor##device##hook, vendor, device, hook)
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
@@ -1060,7 +1096,10 @@ extern int pci_pci_problems;
extern unsigned long pci_cardbus_io_size;
extern unsigned long pci_cardbus_mem_size;
-extern int pcibios_add_platform_entries(struct pci_dev *dev);
+int pcibios_add_platform_entries(struct pci_dev *dev);
+void pcibios_disable_device(struct pci_dev *dev);
+int pcibios_set_pcie_reset_state(struct pci_dev *dev,
+ enum pcie_reset_state state);
#ifdef CONFIG_PCI_MMCONFIG
extern void __init pci_mmcfg_early_init(void);
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 8f67e8f2a3c..a08cd06b541 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -95,9 +95,6 @@ struct hotplug_slot_attribute {
* @get_adapter_status: Called to get see if an adapter is present in the slot or not.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
- * @get_address: Called to get pci address of a slot.
- * If this field is NULL, the value passed in the struct hotplug_slot_info
- * will be used when this value is requested by a user.
* @get_max_bus_speed: Called to get the max bus speed for a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
@@ -120,7 +117,6 @@ struct hotplug_slot_ops {
int (*get_attention_status) (struct hotplug_slot *slot, u8 *value);
int (*get_latch_status) (struct hotplug_slot *slot, u8 *value);
int (*get_adapter_status) (struct hotplug_slot *slot, u8 *value);
- int (*get_address) (struct hotplug_slot *slot, u32 *value);
int (*get_max_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value);
int (*get_cur_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value);
};
@@ -140,7 +136,6 @@ struct hotplug_slot_info {
u8 attention_status;
u8 latch_status;
u8 adapter_status;
- u32 address;
enum pci_bus_speed max_bus_speed;
enum pci_bus_speed cur_bus_speed;
};
@@ -166,15 +161,14 @@ struct hotplug_slot {
/* Variables below this are for use only by the hotplug pci core. */
struct list_head slot_list;
- struct kobject kobj;
+ struct pci_slot *pci_slot;
};
#define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj)
-extern int pci_hp_register (struct hotplug_slot *slot);
-extern int pci_hp_deregister (struct hotplug_slot *slot);
+extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr);
+extern int pci_hp_deregister(struct hotplug_slot *slot);
extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot,
struct hotplug_slot_info *info);
-extern struct kset *pci_hotplug_slots_kset;
/* PCI Setting Record (Type 0) */
struct hpp_type0 {
@@ -227,9 +221,9 @@ struct hotplug_params {
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/actypes.h>
-extern acpi_status acpi_run_oshp(acpi_handle handle);
extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
struct hotplug_params *hpp);
+int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
int acpi_root_bridge(acpi_handle handle);
#endif
#endif
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index c0c1223c919..19958b92990 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -231,6 +231,7 @@
#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */
#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */
#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */
+#define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */
#define PCI_PM_CTRL 4 /* PM control and status register */
#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */
#define PCI_PM_CTRL_NO_SOFT_RESET 0x0004 /* No reset for D3hot->D0 */
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 3261681c82a..95ac21ab3a0 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -53,6 +53,7 @@ struct platform_driver {
int (*suspend_late)(struct platform_device *, pm_message_t state);
int (*resume_early)(struct platform_device *);
int (*resume)(struct platform_device *);
+ struct pm_ext_ops *pm;
struct device_driver driver;
};
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 39a7ee859b6..4ad9de94449 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -112,7 +112,9 @@ typedef struct pm_message {
int event;
} pm_message_t;
-/*
+/**
+ * struct pm_ops - device PM callbacks
+ *
* Several driver power state transitions are externally visible, affecting
* the state of pending I/O queues and (for drivers that touch hardware)
* interrupts, wakeups, DMA, and other hardware state. There may also be
@@ -120,6 +122,284 @@ typedef struct pm_message {
* to the rest of the driver stack (such as a driver that's ON gating off
* clocks which are not in active use).
*
+ * The externally visible transitions are handled with the help of the following
+ * callbacks included in this structure:
+ *
+ * @prepare: Prepare the device for the upcoming transition, but do NOT change
+ * its hardware state. Prevent new children of the device from being
+ * registered after @prepare() returns (the driver's subsystem and
+ * generally the rest of the kernel is supposed to prevent new calls to the
+ * probe method from being made too once @prepare() has succeeded). If
+ * @prepare() detects a situation it cannot handle (e.g. registration of a
+ * child already in progress), it may return -EAGAIN, so that the PM core
+ * can execute it once again (e.g. after the new child has been registered)
+ * to recover from the race condition. This method is executed for all
+ * kinds of suspend transitions and is followed by one of the suspend
+ * callbacks: @suspend(), @freeze(), or @poweroff().
+ * The PM core executes @prepare() for all devices before starting to
+ * execute suspend callbacks for any of them, so drivers may assume all of
+ * the other devices to be present and functional while @prepare() is being
+ * executed. In particular, it is safe to make GFP_KERNEL memory
+ * allocations from within @prepare(). However, drivers may NOT assume
+ * anything about the availability of the user space at that time and it
+ * is not correct to request firmware from within @prepare() (it's too
+ * late to do that). [To work around this limitation, drivers may
+ * register suspend and hibernation notifiers that are executed before the
+ * freezing of tasks.]
+ *
+ * @complete: Undo the changes made by @prepare(). This method is executed for
+ * all kinds of resume transitions, following one of the resume callbacks:
+ * @resume(), @thaw(), @restore(). Also called if the state transition
+ * fails before the driver's suspend callback (@suspend(), @freeze(),
+ * @poweroff()) can be executed (e.g. if the suspend callback fails for one
+ * of the other devices that the PM core has unsuccessfully attempted to
+ * suspend earlier).
+ * The PM core executes @complete() after it has executed the appropriate
+ * resume callback for all devices.
+ *
+ * @suspend: Executed before putting the system into a sleep state in which the
+ * contents of main memory are preserved. Quiesce the device, put it into
+ * a low power state appropriate for the upcoming system state (such as
+ * PCI_D3hot), and enable wakeup events as appropriate.
+ *
+ * @resume: Executed after waking the system up from a sleep state in which the
+ * contents of main memory were preserved. Put the device into the
+ * appropriate state, according to the information saved in memory by the
+ * preceding @suspend(). The driver starts working again, responding to
+ * hardware events and software requests. The hardware may have gone
+ * through a power-off reset, or it may have maintained state from the
+ * previous suspend() which the driver may rely on while resuming. On most
+ * platforms, there are no restrictions on availability of resources like
+ * clocks during @resume().
+ *
+ * @freeze: Hibernation-specific, executed before creating a hibernation image.
+ * Quiesce operations so that a consistent image can be created, but do NOT
+ * otherwise put the device into a low power device state and do NOT emit
+ * system wakeup events. Save in main memory the device settings to be
+ * used by @restore() during the subsequent resume from hibernation or by
+ * the subsequent @thaw(), if the creation of the image or the restoration
+ * of main memory contents from it fails.
+ *
+ * @thaw: Hibernation-specific, executed after creating a hibernation image OR
+ * if the creation of the image fails. Also executed after a failing
+ * attempt to restore the contents of main memory from such an image.
+ * Undo the changes made by the preceding @freeze(), so the device can be
+ * operated in the same way as immediately before the call to @freeze().
+ *
+ * @poweroff: Hibernation-specific, executed after saving a hibernation image.
+ * Quiesce the device, put it into a low power state appropriate for the
+ * upcoming system state (such as PCI_D3hot), and enable wakeup events as
+ * appropriate.
+ *
+ * @restore: Hibernation-specific, executed after restoring the contents of main
+ * memory from a hibernation image. Driver starts working again,
+ * responding to hardware events and software requests. Drivers may NOT
+ * make ANY assumptions about the hardware state right prior to @restore().
+ * On most platforms, there are no restrictions on availability of
+ * resources like clocks during @restore().
+ *
+ * All of the above callbacks, except for @complete(), return error codes.
+ * However, the error codes returned by the resume operations, @resume(),
+ * @thaw(), and @restore(), do not cause the PM core to abort the resume
+ * transition during which they are returned. The error codes returned in
+ * that cases are only printed by the PM core to the system logs for debugging
+ * purposes. Still, it is recommended that drivers only return error codes
+ * from their resume methods in case of an unrecoverable failure (i.e. when the
+ * device being handled refuses to resume and becomes unusable) to allow us to
+ * modify the PM core in the future, so that it can avoid attempting to handle
+ * devices that failed to resume and their children.
+ *
+ * It is allowed to unregister devices while the above callbacks are being
+ * executed. However, it is not allowed to unregister a device from within any
+ * of its own callbacks.
+ */
+
+struct pm_ops {
+ int (*prepare)(struct device *dev);
+ void (*complete)(struct device *dev);
+ int (*suspend)(struct device *dev);
+ int (*resume)(struct device *dev);
+ int (*freeze)(struct device *dev);
+ int (*thaw)(struct device *dev);
+ int (*poweroff)(struct device *dev);
+ int (*restore)(struct device *dev);
+};
+
+/**
+ * struct pm_ext_ops - extended device PM callbacks
+ *
+ * Some devices require certain operations related to suspend and hibernation
+ * to be carried out with interrupts disabled. Thus, 'struct pm_ext_ops' below
+ * is defined, adding callbacks to be executed with interrupts disabled to
+ * 'struct pm_ops'.
+ *
+ * The following callbacks included in 'struct pm_ext_ops' are executed with
+ * the nonboot CPUs switched off and with interrupts disabled on the only
+ * functional CPU. They also are executed with the PM core list of devices
+ * locked, so they must NOT unregister any devices.
+ *
+ * @suspend_noirq: Complete the operations of ->suspend() by carrying out any
+ * actions required for suspending the device that need interrupts to be
+ * disabled
+ *
+ * @resume_noirq: Prepare for the execution of ->resume() by carrying out any
+ * actions required for resuming the device that need interrupts to be
+ * disabled
+ *
+ * @freeze_noirq: Complete the operations of ->freeze() by carrying out any
+ * actions required for freezing the device that need interrupts to be
+ * disabled
+ *
+ * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any
+ * actions required for thawing the device that need interrupts to be
+ * disabled
+ *
+ * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any
+ * actions required for handling the device that need interrupts to be
+ * disabled
+ *
+ * @restore_noirq: Prepare for the execution of ->restore() by carrying out any
+ * actions required for restoring the operations of the device that need
+ * interrupts to be disabled
+ *
+ * All of the above callbacks return error codes, but the error codes returned
+ * by the resume operations, @resume_noirq(), @thaw_noirq(), and
+ * @restore_noirq(), do not cause the PM core to abort the resume transition
+ * during which they are returned. The error codes returned in that cases are
+ * only printed by the PM core to the system logs for debugging purposes.
+ * Still, as stated above, it is recommended that drivers only return error
+ * codes from their resume methods if the device being handled fails to resume
+ * and is not usable any more.
+ */
+
+struct pm_ext_ops {
+ struct pm_ops base;
+ int (*suspend_noirq)(struct device *dev);
+ int (*resume_noirq)(struct device *dev);
+ int (*freeze_noirq)(struct device *dev);
+ int (*thaw_noirq)(struct device *dev);
+ int (*poweroff_noirq)(struct device *dev);
+ int (*restore_noirq)(struct device *dev);
+};
+
+/**
+ * PM_EVENT_ messages
+ *
+ * The following PM_EVENT_ messages are defined for the internal use of the PM
+ * core, in order to provide a mechanism allowing the high level suspend and
+ * hibernation code to convey the necessary information to the device PM core
+ * code:
+ *
+ * ON No transition.
+ *
+ * FREEZE System is going to hibernate, call ->prepare() and ->freeze()
+ * for all devices.
+ *
+ * SUSPEND System is going to suspend, call ->prepare() and ->suspend()
+ * for all devices.
+ *
+ * HIBERNATE Hibernation image has been saved, call ->prepare() and
+ * ->poweroff() for all devices.
+ *
+ * QUIESCE Contents of main memory are going to be restored from a (loaded)
+ * hibernation image, call ->prepare() and ->freeze() for all
+ * devices.
+ *
+ * RESUME System is resuming, call ->resume() and ->complete() for all
+ * devices.
+ *
+ * THAW Hibernation image has been created, call ->thaw() and
+ * ->complete() for all devices.
+ *
+ * RESTORE Contents of main memory have been restored from a hibernation
+ * image, call ->restore() and ->complete() for all devices.
+ *
+ * RECOVER Creation of a hibernation image or restoration of the main
+ * memory contents from a hibernation image has failed, call
+ * ->thaw() and ->complete() for all devices.
+ */
+
+#define PM_EVENT_ON 0x0000
+#define PM_EVENT_FREEZE 0x0001
+#define PM_EVENT_SUSPEND 0x0002
+#define PM_EVENT_HIBERNATE 0x0004
+#define PM_EVENT_QUIESCE 0x0008
+#define PM_EVENT_RESUME 0x0010
+#define PM_EVENT_THAW 0x0020
+#define PM_EVENT_RESTORE 0x0040
+#define PM_EVENT_RECOVER 0x0080
+
+#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
+
+#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
+#define PMSG_QUIESCE ((struct pm_message){ .event = PM_EVENT_QUIESCE, })
+#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
+#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
+#define PMSG_RESUME ((struct pm_message){ .event = PM_EVENT_RESUME, })
+#define PMSG_THAW ((struct pm_message){ .event = PM_EVENT_THAW, })
+#define PMSG_RESTORE ((struct pm_message){ .event = PM_EVENT_RESTORE, })
+#define PMSG_RECOVER ((struct pm_message){ .event = PM_EVENT_RECOVER, })
+#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
+
+/**
+ * Device power management states
+ *
+ * These state labels are used internally by the PM core to indicate the current
+ * status of a device with respect to the PM core operations.
+ *
+ * DPM_ON Device is regarded as operational. Set this way
+ * initially and when ->complete() is about to be called.
+ * Also set when ->prepare() fails.
+ *
+ * DPM_PREPARING Device is going to be prepared for a PM transition. Set
+ * when ->prepare() is about to be called.
+ *
+ * DPM_RESUMING Device is going to be resumed. Set when ->resume(),
+ * ->thaw(), or ->restore() is about to be called.
+ *
+ * DPM_SUSPENDING Device has been prepared for a power transition. Set
+ * when ->prepare() has just succeeded.
+ *
+ * DPM_OFF Device is regarded as inactive. Set immediately after
+ * ->suspend(), ->freeze(), or ->poweroff() has succeeded.
+ * Also set when ->resume()_noirq, ->thaw_noirq(), or
+ * ->restore_noirq() is about to be called.
+ *
+ * DPM_OFF_IRQ Device is in a "deep sleep". Set immediately after
+ * ->suspend_noirq(), ->freeze_noirq(), or
+ * ->poweroff_noirq() has just succeeded.
+ */
+
+enum dpm_state {
+ DPM_INVALID,
+ DPM_ON,
+ DPM_PREPARING,
+ DPM_RESUMING,
+ DPM_SUSPENDING,
+ DPM_OFF,
+ DPM_OFF_IRQ,
+};
+
+struct dev_pm_info {
+ pm_message_t power_state;
+ unsigned can_wakeup:1;
+ unsigned should_wakeup:1;
+ enum dpm_state status; /* Owned by the PM core */
+#ifdef CONFIG_PM_SLEEP
+ struct list_head entry;
+#endif
+};
+
+/*
+ * The PM_EVENT_ messages are also used by drivers implementing the legacy
+ * suspend framework, based on the ->suspend() and ->resume() callbacks common
+ * for suspend and hibernation transitions, according to the rules below.
+ */
+
+/* Necessary, because several drivers use PM_EVENT_PRETHAW */
+#define PM_EVENT_PRETHAW PM_EVENT_QUIESCE
+
+/*
* One transition is triggered by resume(), after a suspend() call; the
* message is implicit:
*
@@ -164,35 +444,13 @@ typedef struct pm_message {
* or from system low-power states such as standby or suspend-to-RAM.
*/
-#define PM_EVENT_ON 0
-#define PM_EVENT_FREEZE 1
-#define PM_EVENT_SUSPEND 2
-#define PM_EVENT_HIBERNATE 4
-#define PM_EVENT_PRETHAW 8
-
-#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
-
-#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
-#define PMSG_PRETHAW ((struct pm_message){ .event = PM_EVENT_PRETHAW, })
-#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
-#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
-#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
-
-struct dev_pm_info {
- pm_message_t power_state;
- unsigned can_wakeup:1;
- unsigned should_wakeup:1;
- bool sleeping:1; /* Owned by the PM core */
-#ifdef CONFIG_PM_SLEEP
- struct list_head entry;
-#endif
-};
+#ifdef CONFIG_PM_SLEEP
+extern void device_pm_lock(void);
+extern void device_power_up(pm_message_t state);
+extern void device_resume(pm_message_t state);
+extern void device_pm_unlock(void);
extern int device_power_down(pm_message_t state);
-extern void device_power_up(void);
-extern void device_resume(void);
-
-#ifdef CONFIG_PM_SLEEP
extern int device_suspend(pm_message_t state);
extern int device_prepare_suspend(pm_message_t state);
diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h
index f0d0b2cb8d2..0aae7776185 100644
--- a/include/linux/pm_wakeup.h
+++ b/include/linux/pm_wakeup.h
@@ -35,6 +35,11 @@ static inline void device_init_wakeup(struct device *dev, int val)
dev->power.can_wakeup = dev->power.should_wakeup = !!val;
}
+static inline void device_set_wakeup_capable(struct device *dev, int val)
+{
+ dev->power.can_wakeup = !!val;
+}
+
static inline int device_can_wakeup(struct device *dev)
{
return dev->power.can_wakeup;
@@ -47,21 +52,7 @@ static inline void device_set_wakeup_enable(struct device *dev, int val)
static inline int device_may_wakeup(struct device *dev)
{
- return dev->power.can_wakeup & dev->power.should_wakeup;
-}
-
-/*
- * Platform hook to activate device wakeup capability, if that's not already
- * handled by enable_irq_wake() etc.
- * Returns zero on success, else negative errno
- */
-extern int (*platform_enable_wakeup)(struct device *dev, int is_on);
-
-static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
-{
- if (platform_enable_wakeup)
- return (*platform_enable_wakeup)(dev, is_on);
- return 0;
+ return dev->power.can_wakeup && dev->power.should_wakeup;
}
#else /* !CONFIG_PM */
@@ -72,6 +63,8 @@ static inline void device_init_wakeup(struct device *dev, int val)
dev->power.can_wakeup = !!val;
}
+static inline void device_set_wakeup_capable(struct device *dev, int val) { }
+
static inline int device_can_wakeup(struct device *dev)
{
return dev->power.can_wakeup;
@@ -80,11 +73,6 @@ static inline int device_can_wakeup(struct device *dev)
#define device_set_wakeup_enable(dev, val) do {} while (0)
#define device_may_wakeup(dev) 0
-static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
-{
- return 0;
-}
-
#endif /* !CONFIG_PM */
#endif /* _LINUX_PM_WAKEUP_H */
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index a6977423baf..e8e69159af7 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -86,6 +86,11 @@ typedef int __bitwise suspend_state_t;
* that implement @begin(), but platforms implementing @begin() should
* also provide a @end() which cleans up transitions aborted before
* @enter().
+ *
+ * @recover: Recover the platform from a suspend failure.
+ * Called by the PM core if the suspending of devices fails.
+ * This callback is optional and should only be implemented by platforms
+ * which require special recovery actions in that situation.
*/
struct platform_suspend_ops {
int (*valid)(suspend_state_t state);
@@ -94,6 +99,7 @@ struct platform_suspend_ops {
int (*enter)(suspend_state_t state);
void (*finish)(void);
void (*end)(void);
+ void (*recover)(void);
};
#ifdef CONFIG_SUSPEND
@@ -149,7 +155,7 @@ extern void mark_free_pages(struct zone *zone);
* The methods in this structure allow a platform to carry out special
* operations required by it during a hibernation transition.
*
- * All the methods below must be implemented.
+ * All the methods below, except for @recover(), must be implemented.
*
* @begin: Tell the platform driver that we're starting hibernation.
* Called right after shrinking memory and before freezing devices.
@@ -189,6 +195,11 @@ extern void mark_free_pages(struct zone *zone);
* @restore_cleanup: Clean up after a failing image restoration.
* Called right after the nonboot CPUs have been enabled and before
* thawing devices (runs with IRQs on).
+ *
+ * @recover: Recover the platform from a failure to suspend devices.
+ * Called by the PM core if the suspending of devices during hibernation
+ * fails. This callback is optional and should only be implemented by
+ * platforms which require special recovery actions in that situation.
*/
struct platform_hibernation_ops {
int (*begin)(void);
@@ -200,6 +211,7 @@ struct platform_hibernation_ops {
void (*leave)(void);
int (*pre_restore)(void);
void (*restore_cleanup)(void);
+ void (*recover)(void);
};
#ifdef CONFIG_HIBERNATION
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 14a656cdc65..f011e0870b5 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -180,6 +180,17 @@ static void platform_restore_cleanup(int platform_mode)
}
/**
+ * platform_recover - recover the platform from a failure to suspend
+ * devices.
+ */
+
+static void platform_recover(int platform_mode)
+{
+ if (platform_mode && hibernation_ops && hibernation_ops->recover)
+ hibernation_ops->recover();
+}
+
+/**
* create_image - freeze devices that need to be frozen with interrupts
* off, create the hibernation image and thaw those devices. Control
* reappears in this routine after a restore.
@@ -193,6 +204,7 @@ static int create_image(int platform_mode)
if (error)
return error;
+ device_pm_lock();
local_irq_disable();
/* At this point, device_suspend() has been called, but *not*
* device_power_down(). We *must* call device_power_down() now.
@@ -224,9 +236,11 @@ static int create_image(int platform_mode)
/* NOTE: device_power_up() is just a resume() for devices
* that suspended with irqs off ... no overall powerup.
*/
- device_power_up();
+ device_power_up(in_suspend ?
+ (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
Enable_irqs:
local_irq_enable();
+ device_pm_unlock();
return error;
}
@@ -255,10 +269,10 @@ int hibernation_snapshot(int platform_mode)
suspend_console();
error = device_suspend(PMSG_FREEZE);
if (error)
- goto Resume_console;
+ goto Recover_platform;
if (hibernation_test(TEST_DEVICES))
- goto Resume_devices;
+ goto Recover_platform;
error = platform_pre_snapshot(platform_mode);
if (error || hibernation_test(TEST_PLATFORM))
@@ -280,12 +294,16 @@ int hibernation_snapshot(int platform_mode)
Finish:
platform_finish(platform_mode);
Resume_devices:
- device_resume();
- Resume_console:
+ device_resume(in_suspend ?
+ (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
resume_console();
Close:
platform_end(platform_mode);
return error;
+
+ Recover_platform:
+ platform_recover(platform_mode);
+ goto Resume_devices;
}
/**
@@ -300,8 +318,9 @@ static int resume_target_kernel(void)
{
int error;
+ device_pm_lock();
local_irq_disable();
- error = device_power_down(PMSG_PRETHAW);
+ error = device_power_down(PMSG_QUIESCE);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
"aborting resume\n");
@@ -329,9 +348,10 @@ static int resume_target_kernel(void)
swsusp_free();
restore_processor_state();
touch_softlockup_watchdog();
- device_power_up();
+ device_power_up(PMSG_RECOVER);
Enable_irqs:
local_irq_enable();
+ device_pm_unlock();
return error;
}
@@ -350,7 +370,7 @@ int hibernation_restore(int platform_mode)
pm_prepare_console();
suspend_console();
- error = device_suspend(PMSG_PRETHAW);
+ error = device_suspend(PMSG_QUIESCE);
if (error)
goto Finish;
@@ -362,7 +382,7 @@ int hibernation_restore(int platform_mode)
enable_nonboot_cpus();
}
platform_restore_cleanup(platform_mode);
- device_resume();
+ device_resume(PMSG_RECOVER);
Finish:
resume_console();
pm_restore_console();
@@ -392,8 +412,11 @@ int hibernation_platform_enter(void)
suspend_console();
error = device_suspend(PMSG_HIBERNATE);
- if (error)
- goto Resume_console;
+ if (error) {
+ if (hibernation_ops->recover)
+ hibernation_ops->recover();
+ goto Resume_devices;
+ }
error = hibernation_ops->prepare();
if (error)
@@ -403,6 +426,7 @@ int hibernation_platform_enter(void)
if (error)
goto Finish;
+ device_pm_lock();
local_irq_disable();
error = device_power_down(PMSG_HIBERNATE);
if (!error) {
@@ -411,6 +435,7 @@ int hibernation_platform_enter(void)
while (1);
}
local_irq_enable();
+ device_pm_unlock();
/*
* We don't need to reenable the nonboot CPUs or resume consoles, since
@@ -419,8 +444,7 @@ int hibernation_platform_enter(void)
Finish:
hibernation_ops->finish();
Resume_devices:
- device_resume();
- Resume_console:
+ device_resume(PMSG_RESTORE);
resume_console();
Close:
hibernation_ops->end();
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 6a6d5eb3524..3398f4651aa 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -228,6 +228,7 @@ static int suspend_enter(suspend_state_t state)
{
int error = 0;
+ device_pm_lock();
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
@@ -239,10 +240,11 @@ static int suspend_enter(suspend_state_t state)
if (!suspend_test(TEST_CORE))
error = suspend_ops->enter(state);
- device_power_up();
+ device_power_up(PMSG_RESUME);
Done:
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
+ device_pm_unlock();
return error;
}
@@ -267,11 +269,11 @@ int suspend_devices_and_enter(suspend_state_t state)
error = device_suspend(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to suspend\n");
- goto Resume_console;
+ goto Recover_platform;
}
if (suspend_test(TEST_DEVICES))
- goto Resume_devices;
+ goto Recover_platform;
if (suspend_ops->prepare) {
error = suspend_ops->prepare();
@@ -291,13 +293,17 @@ int suspend_devices_and_enter(suspend_state_t state)
if (suspend_ops->finish)
suspend_ops->finish();
Resume_devices:
- device_resume();
- Resume_console:
+ device_resume(PMSG_RESUME);
resume_console();
Close:
if (suspend_ops->end)
suspend_ops->end();
return error;
+
+ Recover_platform:
+ if (suspend_ops->recover)
+ suspend_ops->recover();
+ goto Resume_devices;
}
/**
diff --git a/lib/kobject.c b/lib/kobject.c
index 718e5101c26..dcade0543bd 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -439,6 +439,7 @@ out:
return error;
}
+EXPORT_SYMBOL_GPL(kobject_rename);
/**
* kobject_move - move object to another parent